ARM: tegra: colibri_t30: enable emmc ddr52 mode

Add mmc-ddr-1_8v property enabling eMMC DDR52 mode.

root@colibri-t30:~# cat /sys/kernel/debug/mmc1/ios
clock:          52000000 Hz
actual clock:   52000000 Hz
vdd:            21 (3.3 ~ 3.4 V)
bus mode:       2 (push-pull)
chip select:    0 (don't care)
power mode:     2 (on)
bus width:      3 (8 bits)
timing spec:    8 (mmc DDR52)
signal voltage: 1 (1.80 V)
driver type:    0 (driver type B)
root@colibri-t30:~# hdparm -t /dev/mmcblk1

/dev/mmcblk1:
 Timing buffered disk reads: 222 MB in  3.00 seconds =  73.92 MB/sec

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index c5cb05f7860430f344b380a7caa59ff869829a8f..95b6444a6f050195382bc27d59b52d96c0eea2cd 100644 (file)
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -933,6 +933,7 @@
                non-removable;
                vmmc-supply = <&reg_module_3v3>; /* VCC */
                vqmmc-supply = <&reg_1v8_vio>; /* VCCQ */
+               mmc-ddr-1_8v;
        };
 
        /* EHCI instance 1: USB2_DP/N -> AX88772B */