--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/fsl,mpr121-touchkey.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MPR121 capacitive touch sensor controller
+
+maintainers:
+ - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+description: |
+ The MPR121 supports up to 12 completely independent electrodes/capacitance
+ sensing inputs in which 8 are multifunctional for LED driving and GPIO.
+ https://www.nxp.com/docs/en/data-sheet/MPR121.pdf
+
+allOf:
+ - $ref: input.yaml#
+
+properties:
+ compatible:
+ const: fsl,mpr121-touchkey
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ vdd-supply:
+ maxItems: 1
+
+ linux,keycodes:
+ minItems: 1
+ maxItems: 12
+
+ wakeup-source:
+ description: Use any event on keypad as wakeup event.
+ type: boolean
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - vdd-supply
+ - linux,keycodes
+
+examples:
+ - |
+ #include "dt-bindings/input/input.h"
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mpr121@5a {
+ compatible = "fsl,mpr121-touchkey";
+ reg = <0x5a>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <28 2>;
+ autorepeat;
+ vdd-supply = <&ldo4_reg>;
+ linux,keycodes = <KEY_0>, <KEY_1>, <KEY_2>, <KEY_3>,
+ <KEY_4>, <KEY_5>, <KEY_6>, <KEY_7>,
+ <KEY_8>, <KEY_9>, <KEY_A>, <KEY_B>;
+ };
+ };
+++ /dev/null
-* Freescale MPR121 Controllor
-
-Required Properties:
-- compatible: Should be "fsl,mpr121-touchkey"
-- reg: The I2C slave address of the device.
-- interrupts: The interrupt number to the cpu.
-- vdd-supply: Phandle to the Vdd power supply.
-- linux,keycodes: Specifies an array of numeric keycode values to
- be used for reporting button presses. The array can
- contain up to 12 entries.
-
-Optional Properties:
-- wakeup-source: Use any event on keypad as wakeup event.
-- autorepeat: Enable autorepeat feature.
-
-Example:
-
-#include "dt-bindings/input/input.h"
-
- touchkey: mpr121@5a {
- compatible = "fsl,mpr121-touchkey";
- reg = <0x5a>;
- interrupt-parent = <&gpio1>;
- interrupts = <28 2>;
- autorepeat;
- vdd-supply = <&ldo4_reg>;
- linux,keycodes = <KEY_0>, <KEY_1>, <KEY_2>, <KEY_3>,
- <KEY_4> <KEY_5>, <KEY_6>, <KEY_7>,
- <KEY_8>, <KEY_9>, <KEY_A>, <KEY_B>;
- };