compatible = "aspeed,ast2400-vuart";
reg = <0x1e787000 0x40>;
reg-shift = <2>;
- interrupts = <10>;
+ interrupts = <8>;
clocks = <&clk_uart>;
no-loopback-test;
status = "disabled";
jc42@18 {
compatible = "nxp,se97b", "jedec,jc-42.4-temp";
reg = <0x18>;
+ smbus-timeout-disable;
};
dpot: mcp4651-104@28 {
*/
battery {
pinctrl-names = "default";
- pintctrl-0 = <&battery_pins>;
+ pinctrl-0 = <&battery_pins>;
compatible = "lego,ev3-battery";
io-channels = <&adc 4>, <&adc 3>;
io-channel-names = "voltage", "current";
batt_volt_en {
gpio-hog;
gpios = <6 GPIO_ACTIVE_HIGH>;
- output-low;
+ output-high;
};
};
status = "okay";
};
+&mixer {
+ status = "okay";
+};
+
/* eMMC flash */
&mmc_0 {
status = "okay";
reg = <0x2a>;
VDDA-supply = <®_3p3v>;
VDDIO-supply = <®_3p3v>;
- clocks = <&sys_mclk 1>;
+ clocks = <&sys_mclk>;
};
};
};
reg = <0x0a>;
VDDA-supply = <®_3p3v>;
VDDIO-supply = <®_3p3v>;
- clocks = <&sys_mclk 1>;
+ clocks = <&sys_mclk>;
};
};
};
};
+&cpu0 {
+ cpu0-supply = <&vdd_arm>;
+};
+
&i2c1 {
status = "okay";
clock-frequency = <400000>;
iep_mmu: iommu@ff900800 {
compatible = "rockchip,iommu";
reg = <0x0 0xff900800 0x0 0x40>;
- interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "iep_mmu";
#iommu-cells = <0>;
status = "disabled";
reg = <0x01c16000 0x1000>;
interrupts = <58>;
clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>,
- <&ccu 9>,
- <&ccu 18>;
+ <&ccu CLK_PLL_VIDEO0_2X>,
+ <&ccu CLK_PLL_VIDEO1_2X>;
clock-names = "ahb", "mod", "pll-0", "pll-1";
dmas = <&dma SUN4I_DMA_NORMAL 16>,
<&dma SUN4I_DMA_NORMAL 16>,
reg = <0x01c16000 0x1000>;
interrupts = <58>;
clocks = <&ccu CLK_AHB_HDMI>, <&ccu CLK_HDMI>,
- <&ccu 9>,
- <&ccu 16>;
+ <&ccu CLK_PLL_VIDEO0_2X>,
+ <&ccu CLK_PLL_VIDEO1_2X>;
clock-names = "ahb", "mod", "pll-0", "pll-1";
dmas = <&dma SUN4I_DMA_NORMAL 16>,
<&dma SUN4I_DMA_NORMAL 16>,
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_AHB1_HDMI>, <&ccu CLK_HDMI>,
<&ccu CLK_HDMI_DDC>,
- <&ccu 7>,
- <&ccu 13>;
+ <&ccu CLK_PLL_VIDEO0_2X>,
+ <&ccu CLK_PLL_VIDEO1_2X>;
clock-names = "ahb", "mod", "ddc", "pll-0", "pll-1";
resets = <&ccu RST_AHB1_HDMI>;
reset-names = "ahb";
reg = <0x01c16000 0x1000>;
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>,
- <&ccu 9>,
- <&ccu 18>;
+ <&ccu CLK_PLL_VIDEO0_2X>,
+ <&ccu CLK_PLL_VIDEO1_2X>;
clock-names = "ahb", "mod", "pll-0", "pll-1";
dmas = <&dma SUN4I_DMA_NORMAL 16>,
<&dma SUN4I_DMA_NORMAL 16>,
status = "okay";
axp81x: pmic@3a3 {
+ compatible = "x-powers,axp813";
reg = <0x3a3>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
reg = <0x6e000 0x400>;
ranges = <0 0x6e000 0x400>;
interrupt-parent = <&gic>;
- interrupt-controller;
#address-cells = <1>;
#size-cells = <1>;
{ "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 17) },
{ "spi_davinci.3", "tx", EDMA_FILTER_PARAM(0, 18) },
{ "spi_davinci.3", "rx", EDMA_FILTER_PARAM(0, 19) },
- { "dm6441-mmc.0", "rx", EDMA_FILTER_PARAM(0, 26) },
- { "dm6441-mmc.0", "tx", EDMA_FILTER_PARAM(0, 27) },
- { "dm6441-mmc.1", "rx", EDMA_FILTER_PARAM(0, 30) },
- { "dm6441-mmc.1", "tx", EDMA_FILTER_PARAM(0, 31) },
+ { "da830-mmc.0", "rx", EDMA_FILTER_PARAM(0, 26) },
+ { "da830-mmc.0", "tx", EDMA_FILTER_PARAM(0, 27) },
+ { "da830-mmc.1", "rx", EDMA_FILTER_PARAM(0, 30) },
+ { "da830-mmc.1", "tx", EDMA_FILTER_PARAM(0, 31) },
};
static struct edma_soc_info dm365_edma_pdata = {
/* not using TC*_ERR */
};
-static struct platform_device dm365_edma_device = {
- .name = "edma",
- .id = 0,
- .dev.platform_data = &dm365_edma_pdata,
- .num_resources = ARRAY_SIZE(edma_resources),
- .resource = edma_resources,
+static const struct platform_device_info dm365_edma_device __initconst = {
+ .name = "edma",
+ .id = 0,
+ .dma_mask = DMA_BIT_MASK(32),
+ .res = edma_resources,
+ .num_res = ARRAY_SIZE(edma_resources),
+ .data = &dm365_edma_pdata,
+ .size_data = sizeof(dm365_edma_pdata),
};
static struct resource dm365_asp_resources[] = {
static int __init dm365_init_devices(void)
{
+ struct platform_device *edma_pdev;
int ret = 0;
if (!cpu_is_davinci_dm365())
return 0;
davinci_cfg_reg(DM365_INT_EDMA_CC);
- platform_device_register(&dm365_edma_device);
+ edma_pdev = platform_device_register_full(&dm365_edma_device);
+ if (IS_ERR(edma_pdev)) {
+ pr_warn("%s: Failed to register eDMA\n", __func__);
+ return PTR_ERR(edma_pdev);
+ }
platform_device_register(&dm365_mdio_device);
platform_device_register(&dm365_emac_device);
pinctrl-0 = <&rgmii_pins>;
phy-mode = "rgmii";
phy-handle = <&ext_rgmii_phy>;
+ phy-supply = <®_dc1sw>;
status = "okay";
};
pinctrl-0 = <&rmii_pins>;
phy-mode = "rmii";
phy-handle = <&ext_rmii_phy1>;
+ phy-supply = <®_dc1sw>;
status = "okay";
};
pinctrl-0 = <&rgmii_pins>;
phy-mode = "rgmii";
phy-handle = <&ext_rgmii_phy>;
+ phy-supply = <®_dc1sw>;
status = "okay";
};
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
- vmmc-supply = <®_vcc3v3>;
+ vmmc-supply = <®_dcdc1>;
vqmmc-supply = <®_vcc1v8>;
bus-width = <8>;
non-removable;
#include "sun50i-a64.dtsi"
-/ {
- reg_vcc3v3: vcc3v3 {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-};
-
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
- vmmc-supply = <®_vcc3v3>;
+ vmmc-supply = <®_dcdc1>;
non-removable;
disable-wp;
bus-width = <4>;
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
status = "okay";
};
&avb {
pinctrl-0 = <&avb_pins>;
pinctrl-names = "default";
- renesas,no-ether-link;
phy-handle = <&phy0>;
status = "okay";
&avb {
pinctrl-0 = <&avb_pins>;
pinctrl-names = "default";
- renesas,no-ether-link;
phy-handle = <&phy0>;
status = "okay";
assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
clock_in_out = "input";
+ /* shows instability at 1GBit right now */
+ max-speed = <100>;
phy-supply = <&vcc_io>;
phy-mode = "rgmii";
pinctrl-names = "default";
tsadc: tsadc@ff250000 {
compatible = "rockchip,rk3328-tsadc";
reg = <0x0 0xff250000 0x0 0x100>;
- interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
assigned-clocks = <&cru SCLK_TSADC>;
assigned-clock-rates = <50000>;
clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
-
- vdd_log: vdd-log {
- compatible = "pwm-regulator";
- pwms = <&pwm2 0 25000 0>;
- regulator-name = "vdd_log";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- regulator-boot-on;
- status = "okay";
- };
};
&cpu_b0 {
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinctrl 0 0 0>,
- <&pinctrl 96 0 0>,
- <&pinctrl 160 0 0>;
+ <&pinctrl 104 0 0>,
+ <&pinctrl 168 0 0>;
gpio-ranges-group-names = "gpio_range0",
"gpio_range1",
"gpio_range2";
.match = sunxi_rsb_device_match,
.probe = sunxi_rsb_device_probe,
.remove = sunxi_rsb_device_remove,
+ .uevent = of_device_uevent_modalias,
};
static void sunxi_rsb_dev_release(struct device *dev)