[PATCH] USB: Add one VID/PID to ftdi_sio

This patch adds the Testo USB interface to the list of devices
recognized by the ftdi_sio module. This device is based on a FT232BL
chip, and is used as an interface to get data from digital sensors
(thermometer, etc). See http://www.testo.com/

Signed-off-by: Colin Leroy <colin@colino.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index ff06c01a555b7b376472cddd305c47084769d181..0b9baaf0da90c695a9b216c15a1766c47a6c51ea 100644 (file)
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -502,6 +502,7 @@ static struct usb_device_id id_table_combined [] = {
        { USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) },
+       { USB_DEVICE(TESTO_VID, TESTO_USB_INTERFACE_PID) },
        { },                                    /* Optional parameter entry */
        { }                                     /* Terminating entry */
 };

diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 024e5512d6004dfd05838c2e80d3d3b89b11330b..04ef90fcb8766d3adffa2f345a178e55a5f7c12b 100644 (file)
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -450,6 +450,13 @@
  */
 #define FTDI_THORLABS_PID              0xfaf0 /* ThorLabs USB motor drivers */
 
+/*
+ * Testo products (http://www.testo.com/)
+ * Submitted by Colin Leroy
+ */
+#define TESTO_VID                      0x128D
+#define TESTO_USB_INTERFACE_PID                0x0001
+
 /* Commands */
 #define FTDI_SIO_RESET                 0 /* Reset the port */
 #define FTDI_SIO_MODEM_CTRL    1 /* Set the modem control register */