if RADIO_ADAPTERS && VIDEO_V4L2
+config RADIO_SI470X
+ bool "Silicon Labs Si470x FM Radio Receiver support"
+ depends on VIDEO_V4L2
+
+source "drivers/media/radio/si470x/Kconfig"
+
+config USB_MR800
+ tristate "AverMedia MR 800 USB FM radio support"
+ depends on USB && VIDEO_V4L2
+ ---help---
+ Say Y here if you want to connect this type of radio to your
+ computer's USB port. Note that the audio is not digital, and
+ you must connect the line out connector to a sound card or a
+ set of speakers.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-mr800.
+
+config USB_DSBR
+ tristate "D-Link/GemTek USB FM radio support"
+ depends on USB && VIDEO_V4L2
+ ---help---
+ Say Y here if you want to connect this type of radio to your
+ computer's USB port. Note that the audio is not digital, and
+ you must connect the line out connector to a sound card or a
+ set of speakers.
+
+ To compile this driver as a module, choose M here: the
+ module will be called dsbr100.
+
+config RADIO_MAXIRADIO
+ tristate "Guillemot MAXI Radio FM 2000 radio"
+ depends on VIDEO_V4L2 && PCI
+ ---help---
+ Choose Y here if you have this radio card. This card may also be
+ found as Gemtek PCI FM.
+
+ In order to control your radio card, you will need to use programs
+ that are compatible with the Video For Linux API. Information on
+ this API and pointers to "v4l" programs may be found at
+ <file:Documentation/video4linux/API.html>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-maxiradio.
+
+
+config I2C_SI4713
+ tristate "I2C driver for Silicon Labs Si4713 device"
+ depends on I2C && VIDEO_V4L2
+ ---help---
+ Say Y here if you want support to Si4713 I2C device.
+ This device driver supports only i2c bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called si4713.
+
+config RADIO_SI4713
+ tristate "Silicon Labs Si4713 FM Radio Transmitter support"
+ depends on I2C && VIDEO_V4L2
+ select I2C_SI4713
+ ---help---
+ Say Y here if you want support to Si4713 FM Radio Transmitter.
+ This device can transmit audio through FM. It can transmit
+ RDS and RBDS signals as well. This module is the v4l2 radio
+ interface for the i2c driver of this device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-si4713.
+
+config RADIO_TEA5764
+ tristate "TEA5764 I2C FM radio support"
+ depends on I2C && VIDEO_V4L2
+ ---help---
+ Say Y here if you want to use the TEA5764 FM chip found in
+ EZX phones. This FM chip is present in EZX phones from Motorola,
+ connected to internal pxa I2C bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-tea5764.
+
+config RADIO_TEA5764_XTAL
+ bool "TEA5764 crystal reference"
+ depends on RADIO_TEA5764=y
+ default y
+ help
+ Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N
+ here if TEA5764 reference frequency is connected in FREQIN.
+
+config RADIO_SAA7706H
+ tristate "SAA7706H Car Radio DSP"
+ depends on I2C && VIDEO_V4L2
+ ---help---
+ Say Y here if you want to use the SAA7706H Car radio Digital
+ Signal Processor, found for instance on the Russellville development
+ board. On the russellville the device is connected to internal
+ timberdale I2C bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called SAA7706H.
+
+config RADIO_TEF6862
+ tristate "TEF6862 Car Radio Enhanced Selectivity Tuner"
+ depends on I2C && VIDEO_V4L2
+ ---help---
+ Say Y here if you want to use the TEF6862 Car Radio Enhanced
+ Selectivity Tuner, found for instance on the Russellville development
+ board. On the russellville the device is connected to internal
+ timberdale I2C bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called TEF6862.
+
+config RADIO_TIMBERDALE
+ tristate "Enable the Timberdale radio driver"
+ depends on MFD_TIMBERDALE && VIDEO_V4L2
+ depends on I2C # for RADIO_SAA7706H
+ select RADIO_TEF6862
+ select RADIO_SAA7706H
+ ---help---
+ This is a kind of umbrella driver for the Radio Tuner and DSP
+ found behind the Timberdale FPGA on the Russellville board.
+ Enabling this driver will automatically select the DSP and tuner.
+
+config RADIO_WL1273
+ tristate "Texas Instruments WL1273 I2C FM Radio"
+ depends on I2C && VIDEO_V4L2
+ select MFD_CORE
+ select MFD_WL1273_CORE
+ select FW_LOADER
+ ---help---
+ Choose Y here if you have this FM radio chip.
+
+ In order to control your radio card, you will need to use programs
+ that are compatible with the Video For Linux 2 API. Information on
+ this API and pointers to "v4l2" programs may be found at
+ <file:Documentation/video4linux/API.html>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-wl1273.
+
+# TI's ST based wl128x FM radio
+source "drivers/media/radio/wl128x/Kconfig"
+
+#
+# ISA drivers configuration
+#
+
+menuconfig V4L_RADIO_ISA_DRIVERS
+ bool "ISA radio devices"
+ depends on ISA
+ default n
+ ---help---
+ Say Y here to enable support for these ISA drivers.
+
+if V4L_RADIO_ISA_DRIVERS
+
config RADIO_CADET
tristate "ADS Cadet AM/FM Tuner"
depends on ISA && VIDEO_V4L2
following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and
0x28c.
-config RADIO_MAXIRADIO
- tristate "Guillemot MAXI Radio FM 2000 radio"
- depends on VIDEO_V4L2 && PCI
- ---help---
- Choose Y here if you have this radio card. This card may also be
- found as Gemtek PCI FM.
-
- In order to control your radio card, you will need to use programs
- that are compatible with the Video For Linux API. Information on
- this API and pointers to "v4l" programs may be found at
- <file:Documentation/video4linux/API.html>.
-
- To compile this driver as a module, choose M here: the
- module will be called radio-maxiradio.
-
config RADIO_MIROPCM20
tristate "miroSOUND PCM20 radio"
depends on ISA && ISA_DMA_API && VIDEO_V4L2 && SND
help
Enter the I/O port of your Zoltrix radio card.
-config I2C_SI4713
- tristate "I2C driver for Silicon Labs Si4713 device"
- depends on I2C && VIDEO_V4L2
- ---help---
- Say Y here if you want support to Si4713 I2C device.
- This device driver supports only i2c bus.
-
- To compile this driver as a module, choose M here: the
- module will be called si4713.
-
-config RADIO_SI4713
- tristate "Silicon Labs Si4713 FM Radio Transmitter support"
- depends on I2C && VIDEO_V4L2
- select I2C_SI4713
- ---help---
- Say Y here if you want support to Si4713 FM Radio Transmitter.
- This device can transmit audio through FM. It can transmit
- RDS and RBDS signals as well. This module is the v4l2 radio
- interface for the i2c driver of this device.
-
- To compile this driver as a module, choose M here: the
- module will be called radio-si4713.
-
-config USB_DSBR
- tristate "D-Link/GemTek USB FM radio support"
- depends on USB && VIDEO_V4L2
- ---help---
- Say Y here if you want to connect this type of radio to your
- computer's USB port. Note that the audio is not digital, and
- you must connect the line out connector to a sound card or a
- set of speakers.
-
- To compile this driver as a module, choose M here: the
- module will be called dsbr100.
-
-config RADIO_SI470X
- bool "Silicon Labs Si470x FM Radio Receiver support"
- depends on VIDEO_V4L2
-
-source "drivers/media/radio/si470x/Kconfig"
-
-config USB_MR800
- tristate "AverMedia MR 800 USB FM radio support"
- depends on USB && VIDEO_V4L2
- ---help---
- Say Y here if you want to connect this type of radio to your
- computer's USB port. Note that the audio is not digital, and
- you must connect the line out connector to a sound card or a
- set of speakers.
-
- To compile this driver as a module, choose M here: the
- module will be called radio-mr800.
-
-config RADIO_TEA5764
- tristate "TEA5764 I2C FM radio support"
- depends on I2C && VIDEO_V4L2
- ---help---
- Say Y here if you want to use the TEA5764 FM chip found in
- EZX phones. This FM chip is present in EZX phones from Motorola,
- connected to internal pxa I2C bus.
-
- To compile this driver as a module, choose M here: the
- module will be called radio-tea5764.
-
-config RADIO_TEA5764_XTAL
- bool "TEA5764 crystal reference"
- depends on RADIO_TEA5764=y
- default y
- help
- Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N
- here if TEA5764 reference frequency is connected in FREQIN.
-
-config RADIO_SAA7706H
- tristate "SAA7706H Car Radio DSP"
- depends on I2C && VIDEO_V4L2
- ---help---
- Say Y here if you want to use the SAA7706H Car radio Digital
- Signal Processor, found for instance on the Russellville development
- board. On the russellville the device is connected to internal
- timberdale I2C bus.
-
- To compile this driver as a module, choose M here: the
- module will be called SAA7706H.
-
-config RADIO_TEF6862
- tristate "TEF6862 Car Radio Enhanced Selectivity Tuner"
- depends on I2C && VIDEO_V4L2
- ---help---
- Say Y here if you want to use the TEF6862 Car Radio Enhanced
- Selectivity Tuner, found for instance on the Russellville development
- board. On the russellville the device is connected to internal
- timberdale I2C bus.
-
- To compile this driver as a module, choose M here: the
- module will be called TEF6862.
-
-config RADIO_TIMBERDALE
- tristate "Enable the Timberdale radio driver"
- depends on MFD_TIMBERDALE && VIDEO_V4L2
- depends on I2C # for RADIO_SAA7706H
- select RADIO_TEF6862
- select RADIO_SAA7706H
- ---help---
- This is a kind of umbrella driver for the Radio Tuner and DSP
- found behind the Timberdale FPGA on the Russellville board.
- Enabling this driver will automatically select the DSP and tuner.
-
-config RADIO_WL1273
- tristate "Texas Instruments WL1273 I2C FM Radio"
- depends on I2C && VIDEO_V4L2
- select MFD_CORE
- select MFD_WL1273_CORE
- select FW_LOADER
- ---help---
- Choose Y here if you have this FM radio chip.
-
- In order to control your radio card, you will need to use programs
- that are compatible with the Video For Linux 2 API. Information on
- this API and pointers to "v4l2" programs may be found at
- <file:Documentation/video4linux/API.html>.
-
- To compile this driver as a module, choose M here: the
- module will be called radio-wl1273.
-
-# TI's ST based wl128x FM radio
-source "drivers/media/radio/wl128x/Kconfig"
+endif # V4L_RADIO_ISA_DRIVERS
endif # RADIO_ADAPTERS
projects / mirror_ubuntu-bionic-kernel.git / commitdiff