MIPS: Alchemy: devboard PM needs to save CPLD registers.

Save/restore CPLD registers when doing suspend-to-ram; this fixes issues
with harddisk and ethernet not working correctly when resuming on DB1200.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/986/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

diff --git a/arch/mips/alchemy/devboards/pm.c b/arch/mips/alchemy/devboards/pm.c
index 632f9862a0fbdb57513f6fefeecdd300c8e360c2..4bbd3133e451cb81a67b51394a0048e95485bb95 100644 (file)
--- a/arch/mips/alchemy/devboards/pm.c
+++ b/arch/mips/alchemy/devboards/pm.c
@@ -10,6 +10,7 @@
 #include <linux/sysfs.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/gpio.h>
+#include <asm/mach-db1x00/bcsr.h>
 
 /*
  * Generic suspend userspace interface for Alchemy development boards.
@@ -26,6 +27,20 @@ static unsigned long db1x_pm_last_wakesrc;
 
 static int db1x_pm_enter(suspend_state_t state)
 {
+       unsigned short bcsrs[16];
+       int i, j, hasint;
+
+       /* save CPLD regs */
+       hasint = bcsr_read(BCSR_WHOAMI);
+       hasint = BCSR_WHOAMI_BOARD(hasint) >= BCSR_WHOAMI_DB1200;
+       j = (hasint) ? BCSR_MASKSET : BCSR_SYSTEM;
+
+       for (i = BCSR_STATUS; i <= j; i++)
+               bcsrs[i] = bcsr_read(i);
+
+       /* shut off hexleds */
+       bcsr_write(BCSR_HEXCLEAR, 3);
+
        /* enable GPIO based wakeup */
        alchemy_gpio1_input_enable();
 
@@ -52,6 +67,23 @@ static int db1x_pm_enter(suspend_state_t state)
        /* ...and now the sandman can come! */
        au_sleep();
 
+
+       /* restore CPLD regs */
+       for (i = BCSR_STATUS; i <= BCSR_SYSTEM; i++)
+               bcsr_write(i, bcsrs[i]);
+
+       /* restore CPLD int registers */
+       if (hasint) {
+               bcsr_write(BCSR_INTCLR, 0xffff);
+               bcsr_write(BCSR_MASKCLR, 0xffff);
+               bcsr_write(BCSR_INTSTAT, 0xffff);
+               bcsr_write(BCSR_INTSET, bcsrs[BCSR_INTSET]);
+               bcsr_write(BCSR_MASKSET, bcsrs[BCSR_MASKSET]);
+       }
+
+       /* light up hexleds */
+       bcsr_write(BCSR_HEXCLEAR, 0);
+
        return 0;
 }