]> git.proxmox.com Git - mirror_ubuntu-eoan-kernel.git/commitdiff
Input: xpad - ensure xpad->bulk_out is initialized before submitting urb
authorAxel Lin <axel.lin@gmail.com>
Thu, 18 Nov 2010 07:59:34 +0000 (23:59 -0800)
committerDmitry Torokhov <dmitry.torokhov@gmail.com>
Thu, 18 Nov 2010 08:16:44 +0000 (00:16 -0800)
As pointed out by Oliver Neukum:
xpad->irq_in is currently submitted before xpad->bulk_out is allocated.
That however is a race, because the callback for irq_in can call
xpad360w_process_packet(), which will in turn submit the bulk URB.

This patch moves initialization for xpad->bulk_out earlier, so we can
ensure xpad->bulk_out is initialized before submitting urb.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
drivers/input/joystick/xpad.c

index 4875de9a3f887537c4a19493afa508bc28c5c799..56abf3d0e911236d4d2972860ba1521072a4a4d2 100644 (file)
@@ -921,19 +921,7 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 
        usb_set_intfdata(intf, xpad);
 
-       /*
-        * Submit the int URB immediately rather than waiting for open
-        * because we get status messages from the device whether
-        * or not any controllers are attached.  In fact, it's
-        * exactly the message that a controller has arrived that
-        * we're waiting for.
-        */
        if (xpad->xtype == XTYPE_XBOX360W) {
-               xpad->irq_in->dev = xpad->udev;
-               error = usb_submit_urb(xpad->irq_in, GFP_KERNEL);
-               if (error)
-                       goto fail7;
-
                /*
                 * Setup the message to set the LEDs on the
                 * controller when it shows up
@@ -941,13 +929,13 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
                xpad->bulk_out = usb_alloc_urb(0, GFP_KERNEL);
                if (!xpad->bulk_out) {
                        error = -ENOMEM;
-                       goto fail8;
+                       goto fail7;
                }
 
                xpad->bdata = kzalloc(XPAD_PKT_LEN, GFP_KERNEL);
                if (!xpad->bdata) {
                        error = -ENOMEM;
-                       goto fail9;
+                       goto fail8;
                }
 
                xpad->bdata[2] = 0x08;
@@ -969,12 +957,24 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
                usb_fill_bulk_urb(xpad->bulk_out, udev,
                                usb_sndbulkpipe(udev, ep_irq_in->bEndpointAddress),
                                xpad->bdata, XPAD_PKT_LEN, xpad_bulk_out, xpad);
+
+               /*
+                * Submit the int URB immediately rather than waiting for open
+                * because we get status messages from the device whether
+                * or not any controllers are attached.  In fact, it's
+                * exactly the message that a controller has arrived that
+                * we're waiting for.
+                */
+               xpad->irq_in->dev = xpad->udev;
+               error = usb_submit_urb(xpad->irq_in, GFP_KERNEL);
+               if (error)
+                       goto fail9;
        }
 
        return 0;
 
- fail9:        usb_free_urb(xpad->bulk_out);
- fail8:        usb_kill_urb(xpad->irq_in);
+ fail9:        kfree(xpad->bdata);
+ fail8:        usb_free_urb(xpad->bulk_out);
  fail7:        input_unregister_device(input_dev);
        input_dev = NULL;
  fail6:        xpad_led_disconnect(xpad);