--- /dev/null
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spmi/hisilicon,hisi-spmi-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon SPMI controller
+
+maintainers:
+ - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+
+description: |
+ The HiSilicon SPMI BUS controller is found on some Kirin-based designs.
+ It is a MIPI System Power Management (SPMI) controller.
+
+ The PMIC part is provided by
+ ./Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml.
+
+allOf:
+ - $ref: spmi.yaml#
+
+properties:
+
+ $nodename:
+ pattern: "spmi@[0-9a-f]"
+
+ compatible:
+ const: hisilicon,kirin970-spmi-controller
+
+ reg:
+ maxItems: 1
+
+ hisilicon,spmi-channel:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ number of the Kirin 970 SPMI channel where the SPMI devices are connected.
+
+required:
+ - compatible
+ - reg
+ - hisilicon,spmi-channel
+
+patternProperties:
+ "@[0-9a-f]$":
+ type: object
+
+ description: |
+ PMIC properties, which are specific to the used SPMI PMIC device(s).
+ When used in combination with HiSilicon 6421v600, the properties
+ are documented at
+ drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml.
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ spmi: spmi@fff24000 {
+ compatible = "hisilicon,kirin970-spmi-controller";
+ #address-cells = <2>;
+ #size-cells = <0>;
+ reg = <0x0 0xfff24000 0x0 0x1000>;
+ hisilicon,spmi-channel = <2>;
+
+ pmic@0 {
+ reg = <0 0>;
+ /* pmic properties */
+ };
+ };
+ };
W: http://www.hisilicon.com
F: drivers/spi/spi-hisi-kunpeng.c
+HISILICON SPMI CONTROLLER DRIVER FOR HIKEY 970
+M: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+L: linux-kernel@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
+F: drivers/spmi/hisi-spmi-controller.c
+
HISILICON STAGING DRIVERS FOR HIKEY 960/970
M: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
S: Maintained
if SPMI
+config SPMI_HISI3670
+ tristate "Hisilicon 3670 SPMI Controller"
+ select IRQ_DOMAIN_HIERARCHY
+ depends on HAS_IOMEM
+ help
+ If you say yes to this option, support will be included for the
+ built-in SPMI PMIC Arbiter interface on Hisilicon 3670
+ processors.
+
config SPMI_MSM_PMIC_ARB
tristate "Qualcomm MSM SPMI Controller (PMIC Arbiter)"
select IRQ_DOMAIN_HIERARCHY
#
obj-$(CONFIG_SPMI) += spmi.o
+obj-$(CONFIG_SPMI_HISI3670) += hisi-spmi-controller.o
obj-$(CONFIG_SPMI_MSM_PMIC_ARB) += spmi-pmic-arb.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/spmi.h>
+
+/*
+ * SPMI register addr
+ */
+#define SPMI_CHANNEL_OFFSET 0x0300
+#define SPMI_SLAVE_OFFSET 0x20
+
+#define SPMI_APB_SPMI_CMD_BASE_ADDR 0x0100
+
+#define SPMI_APB_SPMI_WDATA0_BASE_ADDR 0x0104
+#define SPMI_APB_SPMI_WDATA1_BASE_ADDR 0x0108
+#define SPMI_APB_SPMI_WDATA2_BASE_ADDR 0x010c
+#define SPMI_APB_SPMI_WDATA3_BASE_ADDR 0x0110
+
+#define SPMI_APB_SPMI_STATUS_BASE_ADDR 0x0200
+
+#define SPMI_APB_SPMI_RDATA0_BASE_ADDR 0x0204
+#define SPMI_APB_SPMI_RDATA1_BASE_ADDR 0x0208
+#define SPMI_APB_SPMI_RDATA2_BASE_ADDR 0x020c
+#define SPMI_APB_SPMI_RDATA3_BASE_ADDR 0x0210
+
+#define SPMI_PER_DATAREG_BYTE 4
+/*
+ * SPMI cmd register
+ */
+#define SPMI_APB_SPMI_CMD_EN BIT(31)
+#define SPMI_APB_SPMI_CMD_TYPE_OFFSET 24
+#define SPMI_APB_SPMI_CMD_LENGTH_OFFSET 20
+#define SPMI_APB_SPMI_CMD_SLAVEID_OFFSET 16
+#define SPMI_APB_SPMI_CMD_ADDR_OFFSET 0
+
+/* Command Opcodes */
+
+enum spmi_controller_cmd_op_code {
+ SPMI_CMD_REG_ZERO_WRITE = 0,
+ SPMI_CMD_REG_WRITE = 1,
+ SPMI_CMD_REG_READ = 2,
+ SPMI_CMD_EXT_REG_WRITE = 3,
+ SPMI_CMD_EXT_REG_READ = 4,
+ SPMI_CMD_EXT_REG_WRITE_L = 5,
+ SPMI_CMD_EXT_REG_READ_L = 6,
+ SPMI_CMD_REG_RESET = 7,
+ SPMI_CMD_REG_SLEEP = 8,
+ SPMI_CMD_REG_SHUTDOWN = 9,
+ SPMI_CMD_REG_WAKEUP = 10,
+};
+
+/*
+ * SPMI status register
+ */
+#define SPMI_APB_TRANS_DONE BIT(0)
+#define SPMI_APB_TRANS_FAIL BIT(2)
+
+/* Command register fields */
+#define SPMI_CONTROLLER_CMD_MAX_BYTE_COUNT 16
+
+/* Maximum number of support PMIC peripherals */
+#define SPMI_CONTROLLER_TIMEOUT_US 1000
+#define SPMI_CONTROLLER_MAX_TRANS_BYTES 16
+
+struct spmi_controller_dev {
+ struct spmi_controller *controller;
+ struct device *dev;
+ void __iomem *base;
+ spinlock_t lock;
+ u32 channel;
+};
+
+static int spmi_controller_wait_for_done(struct device *dev,
+ struct spmi_controller_dev *ctrl_dev,
+ void __iomem *base, u8 sid, u16 addr)
+{
+ u32 timeout = SPMI_CONTROLLER_TIMEOUT_US;
+ u32 status, offset;
+
+ offset = SPMI_APB_SPMI_STATUS_BASE_ADDR;
+ offset += SPMI_CHANNEL_OFFSET * ctrl_dev->channel + SPMI_SLAVE_OFFSET * sid;
+
+ do {
+ status = readl(base + offset);
+
+ if (status & SPMI_APB_TRANS_DONE) {
+ if (status & SPMI_APB_TRANS_FAIL) {
+ dev_err(dev, "%s: transaction failed (0x%x)\n",
+ __func__, status);
+ return -EIO;
+ }
+ dev_dbg(dev, "%s: status 0x%x\n", __func__, status);
+ return 0;
+ }
+ udelay(1);
+ } while (timeout--);
+
+ dev_err(dev, "%s: timeout, status 0x%x\n", __func__, status);
+ return -ETIMEDOUT;
+}
+
+static int spmi_read_cmd(struct spmi_controller *ctrl,
+ u8 opc, u8 slave_id, u16 slave_addr, u8 *__buf, size_t bc)
+{
+ struct spmi_controller_dev *spmi_controller = dev_get_drvdata(&ctrl->dev);
+ u32 chnl_ofst = SPMI_CHANNEL_OFFSET * spmi_controller->channel;
+ unsigned long flags;
+ u8 *buf = __buf;
+ u32 cmd, data;
+ int rc;
+ u8 op_code, i;
+
+ if (bc > SPMI_CONTROLLER_MAX_TRANS_BYTES) {
+ dev_err(&ctrl->dev,
+ "spmi_controller supports 1..%d bytes per trans, but:%zu requested\n",
+ SPMI_CONTROLLER_MAX_TRANS_BYTES, bc);
+ return -EINVAL;
+ }
+
+ switch (opc) {
+ case SPMI_CMD_READ:
+ op_code = SPMI_CMD_REG_READ;
+ break;
+ case SPMI_CMD_EXT_READ:
+ op_code = SPMI_CMD_EXT_REG_READ;
+ break;
+ case SPMI_CMD_EXT_READL:
+ op_code = SPMI_CMD_EXT_REG_READ_L;
+ break;
+ default:
+ dev_err(&ctrl->dev, "invalid read cmd 0x%x\n", opc);
+ return -EINVAL;
+ }
+
+ cmd = SPMI_APB_SPMI_CMD_EN |
+ (op_code << SPMI_APB_SPMI_CMD_TYPE_OFFSET) |
+ ((bc - 1) << SPMI_APB_SPMI_CMD_LENGTH_OFFSET) |
+ ((slave_id & 0xf) << SPMI_APB_SPMI_CMD_SLAVEID_OFFSET) | /* slvid */
+ ((slave_addr & 0xffff) << SPMI_APB_SPMI_CMD_ADDR_OFFSET); /* slave_addr */
+
+ spin_lock_irqsave(&spmi_controller->lock, flags);
+
+ writel(cmd, spmi_controller->base + chnl_ofst + SPMI_APB_SPMI_CMD_BASE_ADDR);
+
+ rc = spmi_controller_wait_for_done(&ctrl->dev, spmi_controller,
+ spmi_controller->base, slave_id, slave_addr);
+ if (rc)
+ goto done;
+
+ for (i = 0; bc > i * SPMI_PER_DATAREG_BYTE; i++) {
+ data = readl(spmi_controller->base + chnl_ofst +
+ SPMI_SLAVE_OFFSET * slave_id +
+ SPMI_APB_SPMI_RDATA0_BASE_ADDR +
+ i * SPMI_PER_DATAREG_BYTE);
+ data = be32_to_cpu((__be32 __force)data);
+ if ((bc - i * SPMI_PER_DATAREG_BYTE) >> 2) {
+ memcpy(buf, &data, sizeof(data));
+ buf += sizeof(data);
+ } else {
+ memcpy(buf, &data, bc % SPMI_PER_DATAREG_BYTE);
+ buf += (bc % SPMI_PER_DATAREG_BYTE);
+ }
+ }
+
+done:
+ spin_unlock_irqrestore(&spmi_controller->lock, flags);
+ if (rc)
+ dev_err(&ctrl->dev,
+ "spmi read wait timeout op:0x%x slave_id:%d slave_addr:0x%x bc:%zu\n",
+ opc, slave_id, slave_addr, bc + 1);
+ else
+ dev_dbg(&ctrl->dev, "%s: id:%d slave_addr:0x%x, read value: %*ph\n",
+ __func__, slave_id, slave_addr, (int)bc, __buf);
+
+ return rc;
+}
+
+static int spmi_write_cmd(struct spmi_controller *ctrl,
+ u8 opc, u8 slave_id, u16 slave_addr, const u8 *__buf, size_t bc)
+{
+ struct spmi_controller_dev *spmi_controller = dev_get_drvdata(&ctrl->dev);
+ u32 chnl_ofst = SPMI_CHANNEL_OFFSET * spmi_controller->channel;
+ const u8 *buf = __buf;
+ unsigned long flags;
+ u32 cmd, data;
+ int rc;
+ u8 op_code, i;
+
+ if (bc > SPMI_CONTROLLER_MAX_TRANS_BYTES) {
+ dev_err(&ctrl->dev,
+ "spmi_controller supports 1..%d bytes per trans, but:%zu requested\n",
+ SPMI_CONTROLLER_MAX_TRANS_BYTES, bc);
+ return -EINVAL;
+ }
+
+ switch (opc) {
+ case SPMI_CMD_WRITE:
+ op_code = SPMI_CMD_REG_WRITE;
+ break;
+ case SPMI_CMD_EXT_WRITE:
+ op_code = SPMI_CMD_EXT_REG_WRITE;
+ break;
+ case SPMI_CMD_EXT_WRITEL:
+ op_code = SPMI_CMD_EXT_REG_WRITE_L;
+ break;
+ default:
+ dev_err(&ctrl->dev, "invalid write cmd 0x%x\n", opc);
+ return -EINVAL;
+ }
+
+ cmd = SPMI_APB_SPMI_CMD_EN |
+ (op_code << SPMI_APB_SPMI_CMD_TYPE_OFFSET) |
+ ((bc - 1) << SPMI_APB_SPMI_CMD_LENGTH_OFFSET) |
+ ((slave_id & 0xf) << SPMI_APB_SPMI_CMD_SLAVEID_OFFSET) |
+ ((slave_addr & 0xffff) << SPMI_APB_SPMI_CMD_ADDR_OFFSET);
+
+ /* Write data to FIFOs */
+ spin_lock_irqsave(&spmi_controller->lock, flags);
+
+ for (i = 0; bc > i * SPMI_PER_DATAREG_BYTE; i++) {
+ data = 0;
+ if ((bc - i * SPMI_PER_DATAREG_BYTE) >> 2) {
+ memcpy(&data, buf, sizeof(data));
+ buf += sizeof(data);
+ } else {
+ memcpy(&data, buf, bc % SPMI_PER_DATAREG_BYTE);
+ buf += (bc % SPMI_PER_DATAREG_BYTE);
+ }
+
+ writel((u32 __force)cpu_to_be32(data),
+ spmi_controller->base + chnl_ofst +
+ SPMI_APB_SPMI_WDATA0_BASE_ADDR +
+ SPMI_PER_DATAREG_BYTE * i);
+ }
+
+ /* Start the transaction */
+ writel(cmd, spmi_controller->base + chnl_ofst + SPMI_APB_SPMI_CMD_BASE_ADDR);
+
+ rc = spmi_controller_wait_for_done(&ctrl->dev, spmi_controller,
+ spmi_controller->base, slave_id,
+ slave_addr);
+ spin_unlock_irqrestore(&spmi_controller->lock, flags);
+
+ if (rc)
+ dev_err(&ctrl->dev, "spmi write wait timeout op:0x%x slave_id:%d slave_addr:0x%x bc:%zu\n",
+ opc, slave_id, slave_addr, bc);
+ else
+ dev_dbg(&ctrl->dev, "%s: id:%d slave_addr:0x%x, wrote value: %*ph\n",
+ __func__, slave_id, slave_addr, (int)bc, __buf);
+
+ return rc;
+}
+
+static int spmi_controller_probe(struct platform_device *pdev)
+{
+ struct spmi_controller_dev *spmi_controller;
+ struct spmi_controller *ctrl;
+ struct resource *iores;
+ int ret;
+
+ ctrl = spmi_controller_alloc(&pdev->dev, sizeof(*spmi_controller));
+ if (!ctrl) {
+ dev_err(&pdev->dev, "can not allocate spmi_controller data\n");
+ return -ENOMEM;
+ }
+ spmi_controller = spmi_controller_get_drvdata(ctrl);
+ spmi_controller->controller = ctrl;
+
+ iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!iores) {
+ dev_err(&pdev->dev, "can not get resource!\n");
+ ret = -EINVAL;
+ goto err_put_controller;
+ }
+
+ spmi_controller->base = devm_ioremap(&pdev->dev, iores->start,
+ resource_size(iores));
+ if (!spmi_controller->base) {
+ dev_err(&pdev->dev, "can not remap base addr!\n");
+ ret = -EADDRNOTAVAIL;
+ goto err_put_controller;
+ }
+
+ ret = of_property_read_u32(pdev->dev.of_node, "hisilicon,spmi-channel",
+ &spmi_controller->channel);
+ if (ret) {
+ dev_err(&pdev->dev, "can not get channel\n");
+ ret = -ENODEV;
+ goto err_put_controller;
+ }
+
+ platform_set_drvdata(pdev, spmi_controller);
+ dev_set_drvdata(&ctrl->dev, spmi_controller);
+
+ spin_lock_init(&spmi_controller->lock);
+
+ ctrl->nr = spmi_controller->channel;
+ ctrl->dev.parent = pdev->dev.parent;
+ ctrl->dev.of_node = of_node_get(pdev->dev.of_node);
+
+ /* Callbacks */
+ ctrl->read_cmd = spmi_read_cmd;
+ ctrl->write_cmd = spmi_write_cmd;
+
+ ret = spmi_controller_add(ctrl);
+ if (ret) {
+ dev_err(&pdev->dev, "spmi_controller_add failed with error %d!\n", ret);
+ goto err_put_controller;
+ }
+
+ return 0;
+
+err_put_controller:
+ spmi_controller_put(ctrl);
+ return ret;
+}
+
+static int spmi_del_controller(struct platform_device *pdev)
+{
+ struct spmi_controller *ctrl = platform_get_drvdata(pdev);
+
+ spmi_controller_remove(ctrl);
+ spmi_controller_put(ctrl);
+ return 0;
+}
+
+static const struct of_device_id spmi_controller_match_table[] = {
+ {
+ .compatible = "hisilicon,kirin970-spmi-controller",
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, spmi_controller_match_table);
+
+static struct platform_driver spmi_controller_driver = {
+ .probe = spmi_controller_probe,
+ .remove = spmi_del_controller,
+ .driver = {
+ .name = "hisi_spmi_controller",
+ .of_match_table = spmi_controller_match_table,
+ },
+};
+
+static int __init spmi_controller_init(void)
+{
+ return platform_driver_register(&spmi_controller_driver);
+}
+postcore_initcall(spmi_controller_init);
+
+static void __exit spmi_controller_exit(void)
+{
+ platform_driver_unregister(&spmi_controller_driver);
+}
+module_exit(spmi_controller_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION("1.0");
+MODULE_ALIAS("platform:spmi_controller");
# SPDX-License-Identifier: GPL-2.0
-# to be placed at drivers/spmi
-config SPMI_HISI3670
- tristate "Hisilicon 3670 SPMI Controller"
- select IRQ_DOMAIN_HIERARCHY
- depends on HAS_IOMEM
- depends on SPMI
- help
- If you say yes to this option, support will be included for the
- built-in SPMI PMIC Arbiter interface on Hisilicon 3670
- processors.
-
# to be placed at drivers/mfd
config MFD_HI6421_SPMI
tristate "HiSilicon Hi6421v600 SPMI PMU/Codec IC"
# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_SPMI_HISI3670) += hisi-spmi-controller.o
obj-$(CONFIG_MFD_HI6421_SPMI) += hi6421-spmi-pmic.o
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/seq_file.h>
-#include <linux/slab.h>
-#include <linux/spmi.h>
-
-/*
- * SPMI register addr
- */
-#define SPMI_CHANNEL_OFFSET 0x0300
-#define SPMI_SLAVE_OFFSET 0x20
-
-#define SPMI_APB_SPMI_CMD_BASE_ADDR 0x0100
-
-#define SPMI_APB_SPMI_WDATA0_BASE_ADDR 0x0104
-#define SPMI_APB_SPMI_WDATA1_BASE_ADDR 0x0108
-#define SPMI_APB_SPMI_WDATA2_BASE_ADDR 0x010c
-#define SPMI_APB_SPMI_WDATA3_BASE_ADDR 0x0110
-
-#define SPMI_APB_SPMI_STATUS_BASE_ADDR 0x0200
-
-#define SPMI_APB_SPMI_RDATA0_BASE_ADDR 0x0204
-#define SPMI_APB_SPMI_RDATA1_BASE_ADDR 0x0208
-#define SPMI_APB_SPMI_RDATA2_BASE_ADDR 0x020c
-#define SPMI_APB_SPMI_RDATA3_BASE_ADDR 0x0210
-
-#define SPMI_PER_DATAREG_BYTE 4
-/*
- * SPMI cmd register
- */
-#define SPMI_APB_SPMI_CMD_EN BIT(31)
-#define SPMI_APB_SPMI_CMD_TYPE_OFFSET 24
-#define SPMI_APB_SPMI_CMD_LENGTH_OFFSET 20
-#define SPMI_APB_SPMI_CMD_SLAVEID_OFFSET 16
-#define SPMI_APB_SPMI_CMD_ADDR_OFFSET 0
-
-/* Command Opcodes */
-
-enum spmi_controller_cmd_op_code {
- SPMI_CMD_REG_ZERO_WRITE = 0,
- SPMI_CMD_REG_WRITE = 1,
- SPMI_CMD_REG_READ = 2,
- SPMI_CMD_EXT_REG_WRITE = 3,
- SPMI_CMD_EXT_REG_READ = 4,
- SPMI_CMD_EXT_REG_WRITE_L = 5,
- SPMI_CMD_EXT_REG_READ_L = 6,
- SPMI_CMD_REG_RESET = 7,
- SPMI_CMD_REG_SLEEP = 8,
- SPMI_CMD_REG_SHUTDOWN = 9,
- SPMI_CMD_REG_WAKEUP = 10,
-};
-
-/*
- * SPMI status register
- */
-#define SPMI_APB_TRANS_DONE BIT(0)
-#define SPMI_APB_TRANS_FAIL BIT(2)
-
-/* Command register fields */
-#define SPMI_CONTROLLER_CMD_MAX_BYTE_COUNT 16
-
-/* Maximum number of support PMIC peripherals */
-#define SPMI_CONTROLLER_TIMEOUT_US 1000
-#define SPMI_CONTROLLER_MAX_TRANS_BYTES 16
-
-struct spmi_controller_dev {
- struct spmi_controller *controller;
- struct device *dev;
- void __iomem *base;
- spinlock_t lock;
- u32 channel;
-};
-
-static int spmi_controller_wait_for_done(struct device *dev,
- struct spmi_controller_dev *ctrl_dev,
- void __iomem *base, u8 sid, u16 addr)
-{
- u32 timeout = SPMI_CONTROLLER_TIMEOUT_US;
- u32 status, offset;
-
- offset = SPMI_APB_SPMI_STATUS_BASE_ADDR;
- offset += SPMI_CHANNEL_OFFSET * ctrl_dev->channel + SPMI_SLAVE_OFFSET * sid;
-
- do {
- status = readl(base + offset);
-
- if (status & SPMI_APB_TRANS_DONE) {
- if (status & SPMI_APB_TRANS_FAIL) {
- dev_err(dev, "%s: transaction failed (0x%x)\n",
- __func__, status);
- return -EIO;
- }
- dev_dbg(dev, "%s: status 0x%x\n", __func__, status);
- return 0;
- }
- udelay(1);
- } while (timeout--);
-
- dev_err(dev, "%s: timeout, status 0x%x\n", __func__, status);
- return -ETIMEDOUT;
-}
-
-static int spmi_read_cmd(struct spmi_controller *ctrl,
- u8 opc, u8 slave_id, u16 slave_addr, u8 *__buf, size_t bc)
-{
- struct spmi_controller_dev *spmi_controller = dev_get_drvdata(&ctrl->dev);
- u32 chnl_ofst = SPMI_CHANNEL_OFFSET * spmi_controller->channel;
- unsigned long flags;
- u8 *buf = __buf;
- u32 cmd, data;
- int rc;
- u8 op_code, i;
-
- if (bc > SPMI_CONTROLLER_MAX_TRANS_BYTES) {
- dev_err(&ctrl->dev,
- "spmi_controller supports 1..%d bytes per trans, but:%zu requested\n",
- SPMI_CONTROLLER_MAX_TRANS_BYTES, bc);
- return -EINVAL;
- }
-
- switch (opc) {
- case SPMI_CMD_READ:
- op_code = SPMI_CMD_REG_READ;
- break;
- case SPMI_CMD_EXT_READ:
- op_code = SPMI_CMD_EXT_REG_READ;
- break;
- case SPMI_CMD_EXT_READL:
- op_code = SPMI_CMD_EXT_REG_READ_L;
- break;
- default:
- dev_err(&ctrl->dev, "invalid read cmd 0x%x\n", opc);
- return -EINVAL;
- }
-
- cmd = SPMI_APB_SPMI_CMD_EN |
- (op_code << SPMI_APB_SPMI_CMD_TYPE_OFFSET) |
- ((bc - 1) << SPMI_APB_SPMI_CMD_LENGTH_OFFSET) |
- ((slave_id & 0xf) << SPMI_APB_SPMI_CMD_SLAVEID_OFFSET) | /* slvid */
- ((slave_addr & 0xffff) << SPMI_APB_SPMI_CMD_ADDR_OFFSET); /* slave_addr */
-
- spin_lock_irqsave(&spmi_controller->lock, flags);
-
- writel(cmd, spmi_controller->base + chnl_ofst + SPMI_APB_SPMI_CMD_BASE_ADDR);
-
- rc = spmi_controller_wait_for_done(&ctrl->dev, spmi_controller,
- spmi_controller->base, slave_id, slave_addr);
- if (rc)
- goto done;
-
- for (i = 0; bc > i * SPMI_PER_DATAREG_BYTE; i++) {
- data = readl(spmi_controller->base + chnl_ofst +
- SPMI_SLAVE_OFFSET * slave_id +
- SPMI_APB_SPMI_RDATA0_BASE_ADDR +
- i * SPMI_PER_DATAREG_BYTE);
- data = be32_to_cpu((__be32 __force)data);
- if ((bc - i * SPMI_PER_DATAREG_BYTE) >> 2) {
- memcpy(buf, &data, sizeof(data));
- buf += sizeof(data);
- } else {
- memcpy(buf, &data, bc % SPMI_PER_DATAREG_BYTE);
- buf += (bc % SPMI_PER_DATAREG_BYTE);
- }
- }
-
-done:
- spin_unlock_irqrestore(&spmi_controller->lock, flags);
- if (rc)
- dev_err(&ctrl->dev,
- "spmi read wait timeout op:0x%x slave_id:%d slave_addr:0x%x bc:%zu\n",
- opc, slave_id, slave_addr, bc + 1);
- else
- dev_dbg(&ctrl->dev, "%s: id:%d slave_addr:0x%x, read value: %*ph\n",
- __func__, slave_id, slave_addr, (int)bc, __buf);
-
- return rc;
-}
-
-static int spmi_write_cmd(struct spmi_controller *ctrl,
- u8 opc, u8 slave_id, u16 slave_addr, const u8 *__buf, size_t bc)
-{
- struct spmi_controller_dev *spmi_controller = dev_get_drvdata(&ctrl->dev);
- u32 chnl_ofst = SPMI_CHANNEL_OFFSET * spmi_controller->channel;
- const u8 *buf = __buf;
- unsigned long flags;
- u32 cmd, data;
- int rc;
- u8 op_code, i;
-
- if (bc > SPMI_CONTROLLER_MAX_TRANS_BYTES) {
- dev_err(&ctrl->dev,
- "spmi_controller supports 1..%d bytes per trans, but:%zu requested\n",
- SPMI_CONTROLLER_MAX_TRANS_BYTES, bc);
- return -EINVAL;
- }
-
- switch (opc) {
- case SPMI_CMD_WRITE:
- op_code = SPMI_CMD_REG_WRITE;
- break;
- case SPMI_CMD_EXT_WRITE:
- op_code = SPMI_CMD_EXT_REG_WRITE;
- break;
- case SPMI_CMD_EXT_WRITEL:
- op_code = SPMI_CMD_EXT_REG_WRITE_L;
- break;
- default:
- dev_err(&ctrl->dev, "invalid write cmd 0x%x\n", opc);
- return -EINVAL;
- }
-
- cmd = SPMI_APB_SPMI_CMD_EN |
- (op_code << SPMI_APB_SPMI_CMD_TYPE_OFFSET) |
- ((bc - 1) << SPMI_APB_SPMI_CMD_LENGTH_OFFSET) |
- ((slave_id & 0xf) << SPMI_APB_SPMI_CMD_SLAVEID_OFFSET) |
- ((slave_addr & 0xffff) << SPMI_APB_SPMI_CMD_ADDR_OFFSET);
-
- /* Write data to FIFOs */
- spin_lock_irqsave(&spmi_controller->lock, flags);
-
- for (i = 0; bc > i * SPMI_PER_DATAREG_BYTE; i++) {
- data = 0;
- if ((bc - i * SPMI_PER_DATAREG_BYTE) >> 2) {
- memcpy(&data, buf, sizeof(data));
- buf += sizeof(data);
- } else {
- memcpy(&data, buf, bc % SPMI_PER_DATAREG_BYTE);
- buf += (bc % SPMI_PER_DATAREG_BYTE);
- }
-
- writel((u32 __force)cpu_to_be32(data),
- spmi_controller->base + chnl_ofst +
- SPMI_APB_SPMI_WDATA0_BASE_ADDR +
- SPMI_PER_DATAREG_BYTE * i);
- }
-
- /* Start the transaction */
- writel(cmd, spmi_controller->base + chnl_ofst + SPMI_APB_SPMI_CMD_BASE_ADDR);
-
- rc = spmi_controller_wait_for_done(&ctrl->dev, spmi_controller,
- spmi_controller->base, slave_id,
- slave_addr);
- spin_unlock_irqrestore(&spmi_controller->lock, flags);
-
- if (rc)
- dev_err(&ctrl->dev, "spmi write wait timeout op:0x%x slave_id:%d slave_addr:0x%x bc:%zu\n",
- opc, slave_id, slave_addr, bc);
- else
- dev_dbg(&ctrl->dev, "%s: id:%d slave_addr:0x%x, wrote value: %*ph\n",
- __func__, slave_id, slave_addr, (int)bc, __buf);
-
- return rc;
-}
-
-static int spmi_controller_probe(struct platform_device *pdev)
-{
- struct spmi_controller_dev *spmi_controller;
- struct spmi_controller *ctrl;
- struct resource *iores;
- int ret;
-
- ctrl = spmi_controller_alloc(&pdev->dev, sizeof(*spmi_controller));
- if (!ctrl) {
- dev_err(&pdev->dev, "can not allocate spmi_controller data\n");
- return -ENOMEM;
- }
- spmi_controller = spmi_controller_get_drvdata(ctrl);
- spmi_controller->controller = ctrl;
-
- iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!iores) {
- dev_err(&pdev->dev, "can not get resource!\n");
- ret = -EINVAL;
- goto err_put_controller;
- }
-
- spmi_controller->base = devm_ioremap(&pdev->dev, iores->start,
- resource_size(iores));
- if (!spmi_controller->base) {
- dev_err(&pdev->dev, "can not remap base addr!\n");
- ret = -EADDRNOTAVAIL;
- goto err_put_controller;
- }
-
- ret = of_property_read_u32(pdev->dev.of_node, "hisilicon,spmi-channel",
- &spmi_controller->channel);
- if (ret) {
- dev_err(&pdev->dev, "can not get channel\n");
- ret = -ENODEV;
- goto err_put_controller;
- }
-
- platform_set_drvdata(pdev, spmi_controller);
- dev_set_drvdata(&ctrl->dev, spmi_controller);
-
- spin_lock_init(&spmi_controller->lock);
-
- ctrl->nr = spmi_controller->channel;
- ctrl->dev.parent = pdev->dev.parent;
- ctrl->dev.of_node = of_node_get(pdev->dev.of_node);
-
- /* Callbacks */
- ctrl->read_cmd = spmi_read_cmd;
- ctrl->write_cmd = spmi_write_cmd;
-
- ret = spmi_controller_add(ctrl);
- if (ret) {
- dev_err(&pdev->dev, "spmi_controller_add failed with error %d!\n", ret);
- goto err_put_controller;
- }
-
- return 0;
-
-err_put_controller:
- spmi_controller_put(ctrl);
- return ret;
-}
-
-static int spmi_del_controller(struct platform_device *pdev)
-{
- struct spmi_controller *ctrl = platform_get_drvdata(pdev);
-
- spmi_controller_remove(ctrl);
- spmi_controller_put(ctrl);
- return 0;
-}
-
-static const struct of_device_id spmi_controller_match_table[] = {
- {
- .compatible = "hisilicon,kirin970-spmi-controller",
- },
- {}
-};
-MODULE_DEVICE_TABLE(of, spmi_controller_match_table);
-
-static struct platform_driver spmi_controller_driver = {
- .probe = spmi_controller_probe,
- .remove = spmi_del_controller,
- .driver = {
- .name = "hisi_spmi_controller",
- .of_match_table = spmi_controller_match_table,
- },
-};
-
-static int __init spmi_controller_init(void)
-{
- return platform_driver_register(&spmi_controller_driver);
-}
-postcore_initcall(spmi_controller_init);
-
-static void __exit spmi_controller_exit(void)
-{
- platform_driver_unregister(&spmi_controller_driver);
-}
-module_exit(spmi_controller_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_VERSION("1.0");
-MODULE_ALIAS("platform:spmi_controller");
node.
The SPMI controller part is provided by
- drivers/staging/hikey9xx/hisilicon,hisi-spmi-controller.yaml.
+ Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
properties:
$nodename:
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/spmi/hisilicon,hisi-spmi-controller.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: HiSilicon SPMI controller
-
-maintainers:
- - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
-description: |
- The HiSilicon SPMI BUS controller is found on some Kirin-based designs.
- It is a MIPI System Power Management (SPMI) controller.
-
- The PMIC part is provided by
- ./Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml.
-
-allOf:
- - $ref: spmi.yaml#
-
-properties:
-
- $nodename:
- pattern: "spmi@[0-9a-f]"
-
- compatible:
- const: hisilicon,kirin970-spmi-controller
-
- reg:
- maxItems: 1
-
- hisilicon,spmi-channel:
- $ref: /schemas/types.yaml#/definitions/uint32
- description: |
- number of the Kirin 970 SPMI channel where the SPMI devices are connected.
-
-required:
- - compatible
- - reg
- - hisilicon,spmi-channel
-
-patternProperties:
- "@[0-9a-f]$":
- type: object
-
- description: |
- PMIC properties, which are specific to the used SPMI PMIC device(s).
- When used in combination with HiSilicon 6421v600, the properties
- are documented at
- drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml.
-
-unevaluatedProperties: false
-
-examples:
- - |
- bus {
- #address-cells = <2>;
- #size-cells = <2>;
-
- spmi: spmi@fff24000 {
- compatible = "hisilicon,kirin970-spmi-controller";
- #address-cells = <2>;
- #size-cells = <0>;
- reg = <0x0 0xfff24000 0x0 0x1000>;
- hisilicon,spmi-channel = <2>;
-
- pmic@0 {
- reg = <0 0>;
- /* pmic properties */
- };
- };
- };
projects / mirror_ubuntu-jammy-kernel.git / commitdiff