brcm80211: fmac: move bus core prep code to sdio_chip.c

This patch is part of abstracting chip backplane handle code
series.

Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index e12e99b7b77449c96057d8c97b61167546ebdb2a..9a78cc3e2820b5bfce8d14ce0f9138d6ad055ac9 100644 (file)
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -135,33 +135,6 @@ struct rte_console {
 /*   Force no backplane reset */
 #define SBSDIO_DEVCTL_RST_NOBPRESET    0x20
 
-/* SBSDIO_FUNC1_CHIPCLKCSR */
-
-/* Force ALP request to backplane */
-#define SBSDIO_FORCE_ALP               0x01
-/* Force HT request to backplane */
-#define SBSDIO_FORCE_HT                        0x02
-/* Force ILP request to backplane */
-#define SBSDIO_FORCE_ILP               0x04
-/* Make ALP ready (power up xtal) */
-#define SBSDIO_ALP_AVAIL_REQ           0x08
-/* Make HT ready (power up PLL) */
-#define SBSDIO_HT_AVAIL_REQ            0x10
-/* Squelch clock requests from HW */
-#define SBSDIO_FORCE_HW_CLKREQ_OFF     0x20
-/* Status: ALP is ready */
-#define SBSDIO_ALP_AVAIL               0x40
-/* Status: HT is ready */
-#define SBSDIO_HT_AVAIL                        0x80
-
-#define SBSDIO_AVBITS          (SBSDIO_HT_AVAIL | SBSDIO_ALP_AVAIL)
-#define SBSDIO_ALPAV(regval)   ((regval) & SBSDIO_AVBITS)
-#define SBSDIO_HTAV(regval)    (((regval) & SBSDIO_AVBITS) == SBSDIO_AVBITS)
-#define SBSDIO_ALPONLY(regval) (SBSDIO_ALPAV(regval) && !SBSDIO_HTAV(regval))
-
-#define SBSDIO_CLKAV(regval, alponly) \
-       (SBSDIO_ALPAV(regval) && (alponly ? 1 : SBSDIO_HTAV(regval)))
-
 /* direct(mapped) cis space */
 
 /* MAPPED common CIS address */
@@ -4010,7 +3983,7 @@ brcmf_sdbrcm_chip_attach(struct brcmf_bus *bus, u32 regs)
 {
        struct chip_info *ci;
        int err;
-       u8 clkval, clkset;
+       u8 clkval;
 
        brcmf_dbg(TRACE, "Enter\n");
 
@@ -4019,50 +3992,6 @@ brcmf_sdbrcm_chip_attach(struct brcmf_bus *bus, u32 regs)
        if (NULL == ci)
                return -ENOMEM;
 
-       /* bus/core/clk setup for register access */
-       /* Try forcing SDIO core to do ALPAvail request only */
-       clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_ALP_AVAIL_REQ;
-       brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
-                              SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err);
-       if (err) {
-               brcmf_dbg(ERROR, "error writing for HT off\n");
-               goto fail;
-       }
-
-       /* If register supported, wait for ALPAvail and then force ALP */
-       /* This may take up to 15 milliseconds */
-       clkval = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1,
-                       SBSDIO_FUNC1_CHIPCLKCSR, NULL);
-       if ((clkval & ~SBSDIO_AVBITS) == clkset) {
-               SPINWAIT(((clkval =
-                               brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1,
-                                               SBSDIO_FUNC1_CHIPCLKCSR,
-                                               NULL)),
-                               !SBSDIO_ALPAV(clkval)),
-                               PMU_MAX_TRANSITION_DLY);
-               if (!SBSDIO_ALPAV(clkval)) {
-                       brcmf_dbg(ERROR, "timeout on ALPAV wait, clkval 0x%02x\n",
-                                 clkval);
-                       err = -EBUSY;
-                       goto fail;
-               }
-               clkset = SBSDIO_FORCE_HW_CLKREQ_OFF |
-                               SBSDIO_FORCE_ALP;
-               brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
-                               SBSDIO_FUNC1_CHIPCLKCSR,
-                               clkset, &err);
-               udelay(65);
-       } else {
-               brcmf_dbg(ERROR, "ChipClkCSR access: wrote 0x%02x read 0x%02x\n",
-                         clkset, clkval);
-               err = -EACCES;
-               goto fail;
-       }
-
-       /* Also, disable the extra SDIO pull-ups */
-       brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
-                              SBSDIO_FUNC1_SDIOPULLUP, 0, NULL);
-
        err = brcmf_sdio_chip_attach(bus->sdiodev, ci, regs);
        if (err)
                goto fail;

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c
index 7f01a9b4aa2fc65e6b5d651d3b65dcab8e980d46..7bf9778cfeff9c55fc6de744e3d2f514b39a2431 100644 (file)
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c
@@ -106,11 +106,63 @@ static int brcmf_sdio_chip_recognition(struct brcmf_sdio_dev *sdiodev,
        return 0;
 }
 
+static int
+brcmf_sdio_chip_buscoreprep(struct brcmf_sdio_dev *sdiodev)
+{
+       int err = 0;
+       u8 clkval, clkset;
+
+       /* Try forcing SDIO core to do ALPAvail request only */
+       clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_ALP_AVAIL_REQ;
+       brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_1,
+                              SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err);
+       if (err) {
+               brcmf_dbg(ERROR, "error writing for HT off\n");
+               return err;
+       }
+
+       /* If register supported, wait for ALPAvail and then force ALP */
+       /* This may take up to 15 milliseconds */
+       clkval = brcmf_sdcard_cfg_read(sdiodev, SDIO_FUNC_1,
+                                      SBSDIO_FUNC1_CHIPCLKCSR, NULL);
+
+       if ((clkval & ~SBSDIO_AVBITS) != clkset) {
+               brcmf_dbg(ERROR, "ChipClkCSR access: wrote 0x%02x read 0x%02x\n",
+                         clkset, clkval);
+               return -EACCES;
+       }
+
+       SPINWAIT(((clkval = brcmf_sdcard_cfg_read(sdiodev, SDIO_FUNC_1,
+                               SBSDIO_FUNC1_CHIPCLKCSR, NULL)),
+                       !SBSDIO_ALPAV(clkval)),
+                       PMU_MAX_TRANSITION_DLY);
+       if (!SBSDIO_ALPAV(clkval)) {
+               brcmf_dbg(ERROR, "timeout on ALPAV wait, clkval 0x%02x\n",
+                         clkval);
+               return -EBUSY;
+       }
+
+       clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_FORCE_ALP;
+       brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_1,
+                              SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err);
+       udelay(65);
+
+       /* Also, disable the extra SDIO pull-ups */
+       brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_1,
+                              SBSDIO_FUNC1_SDIOPULLUP, 0, NULL);
+
+       return 0;
+}
+
 int brcmf_sdio_chip_attach(struct brcmf_sdio_dev *sdiodev,
                           struct chip_info *ci, u32 regs)
 {
        int ret = 0;
 
+       ret = brcmf_sdio_chip_buscoreprep(sdiodev);
+       if (ret != 0)
+               return ret;
+
        ret = brcmf_sdio_chip_recognition(sdiodev, ci, regs);
        if (ret != 0)
                return ret;

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h
index 95951863480bcc667945bf5708435b62b85fb7f6..2d75b8c55de9f3905d454917c52f55718bafbe38 100644 (file)
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h
@@ -28,6 +28,30 @@
 #define CORE_SB(base, field) \
                (base + SBCONFIGOFF + offsetof(struct sbconfig, field))
 
+/* SDIO function 1 register CHIPCLKCSR */
+/* Force ALP request to backplane */
+#define SBSDIO_FORCE_ALP               0x01
+/* Force HT request to backplane */
+#define SBSDIO_FORCE_HT                        0x02
+/* Force ILP request to backplane */
+#define SBSDIO_FORCE_ILP               0x04
+/* Make ALP ready (power up xtal) */
+#define SBSDIO_ALP_AVAIL_REQ           0x08
+/* Make HT ready (power up PLL) */
+#define SBSDIO_HT_AVAIL_REQ            0x10
+/* Squelch clock requests from HW */
+#define SBSDIO_FORCE_HW_CLKREQ_OFF     0x20
+/* Status: ALP is ready */
+#define SBSDIO_ALP_AVAIL               0x40
+/* Status: HT is ready */
+#define SBSDIO_HT_AVAIL                        0x80
+#define SBSDIO_AVBITS          (SBSDIO_HT_AVAIL | SBSDIO_ALP_AVAIL)
+#define SBSDIO_ALPAV(regval)   ((regval) & SBSDIO_AVBITS)
+#define SBSDIO_HTAV(regval)    (((regval) & SBSDIO_AVBITS) == SBSDIO_AVBITS)
+#define SBSDIO_ALPONLY(regval) (SBSDIO_ALPAV(regval) && !SBSDIO_HTAV(regval))
+#define SBSDIO_CLKAV(regval, alponly) \
+       (SBSDIO_ALPAV(regval) && (alponly ? 1 : SBSDIO_HTAV(regval)))
+
 struct chip_info {
        u32 chip;
        u32 chiprev;