mx25: pdk: add platform code for FEC support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mx25pdk.c
index d23ae571c03f83d948b57c635ddab5a126a18a3c..921bc99ea231f3c3dde70419a065c0b3c80294c2 100644 (file)
--- a/arch/arm/mach-mx25/mx25pdk.c
+++ b/arch/arm/mach-mx25/mx25pdk.c
@@ -18,10 +18,11 @@
 
 #include <linux/types.h>
 #include <linux/init.h>
+#include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
-#include <linux/smsc911x.h>
+#include <linux/fec.h>
 #include <linux/platform_device.h>
 
 #include <mach/hardware.h>
@@ -35,16 +36,57 @@
 #include <mach/mx25.h>
 #include <mach/mxc_nand.h>
 #include "devices.h"
-#include <mach/iomux-v3.h>
+#include <mach/iomux.h>
 
 static struct imxuart_platform_data uart_pdata = {
        .flags = IMXUART_HAVE_RTSCTS,
 };
 
+static struct pad_desc mx25pdk_pads[] = {
+       MX25_PAD_FEC_MDC__FEC_MDC,
+       MX25_PAD_FEC_MDIO__FEC_MDIO,
+       MX25_PAD_FEC_TDATA0__FEC_TDATA0,
+       MX25_PAD_FEC_TDATA1__FEC_TDATA1,
+       MX25_PAD_FEC_TX_EN__FEC_TX_EN,
+       MX25_PAD_FEC_RDATA0__FEC_RDATA0,
+       MX25_PAD_FEC_RDATA1__FEC_RDATA1,
+       MX25_PAD_FEC_RX_DV__FEC_RX_DV,
+       MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
+       MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */
+       MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */
+};
+
+static struct fec_platform_data mx25_fec_pdata = {
+        .phy    = PHY_INTERFACE_MODE_RMII,
+};
+
+#define FEC_ENABLE_GPIO                35
+#define FEC_RESET_B_GPIO       104
+
+static void __init mx25pdk_fec_reset(void)
+{
+       gpio_request(FEC_ENABLE_GPIO, "FEC PHY enable");
+       gpio_request(FEC_RESET_B_GPIO, "FEC PHY reset");
+
+       gpio_direction_output(FEC_ENABLE_GPIO, 0);  /* drop PHY power */
+       gpio_direction_output(FEC_RESET_B_GPIO, 0); /* assert reset */
+       udelay(2);
+
+       /* turn on PHY power and lift reset */
+       gpio_set_value(FEC_ENABLE_GPIO, 1);
+       gpio_set_value(FEC_RESET_B_GPIO, 1);
+}
+
 static void __init mx25pdk_init(void)
 {
+       mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
+                       ARRAY_SIZE(mx25pdk_pads));
+
        mxc_register_device(&mxc_uart_device0, &uart_pdata);
        mxc_register_device(&mxc_usbh2, NULL);
+
+       mx25pdk_fec_reset();
+       mxc_register_device(&mx25_fec_device, &mx25_fec_pdata);
 }
 
 static void __init mx25pdk_timer_init(void)