/******************************************************************************
*
- * This file is provided under a dual BSD/GPLv2 license. When using or
- * redistributing this file, you may do so under either license.
+ * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
*
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
*
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
*
* Contact Information:
* Intel Linux Wireless <ilw@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
- * BSD LICENSE
- *
- * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *****************************************************************************/
+ *****************************************************************************/
+#ifndef __il_core_h__
+#define __il_core_h__
+
+#include <linux/interrupt.h>
+#include <linux/pci.h> /* for struct pci_device_id */
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/wait.h>
+#include <net/ieee80211_radiotap.h>
+
+#include "iwl-eeprom.h"
+#include "csr.h"
+#include "iwl-prph.h"
+#include "iwl-debug.h"
+#include "iwl-led.h"
+#include "iwl-power.h"
+#include "iwl-legacy-rs.h"
+
+struct il_host_cmd;
+struct il_cmd;
+struct il_tx_queue;
+
+#define RX_QUEUE_SIZE 256
+#define RX_QUEUE_MASK 255
+#define RX_QUEUE_SIZE_LOG 8
+
+/*
+ * RX related structures and functions
+ */
+#define RX_FREE_BUFFERS 64
+#define RX_LOW_WATERMARK 8
+
+#define U32_PAD(n) ((4-(n))&0x3)
+
+/* CT-KILL constants */
+#define CT_KILL_THRESHOLD_LEGACY 110 /* in Celsius */
+
+/* Default noise level to report when noise measurement is not available.
+ * This may be because we're:
+ * 1) Not associated (4965, no beacon stats being sent to driver)
+ * 2) Scanning (noise measurement does not apply to associated channel)
+ * 3) Receiving CCK (3945 delivers noise info only for OFDM frames)
+ * Use default noise value of -127 ... this is below the range of measurable
+ * Rx dBm for either 3945 or 4965, so it can indicate "unmeasurable" to user.
+ * Also, -127 works better than 0 when averaging frames with/without
+ * noise info (e.g. averaging might be done in app); measured dBm values are
+ * always negative ... using a negative value as the default keeps all
+ * averages within an s8's (used in some apps) range of negative values. */
+#define IL_NOISE_MEAS_NOT_AVAILABLE (-127)
+
+/*
+ * RTS threshold here is total size [2347] minus 4 FCS bytes
+ * Per spec:
+ * a value of 0 means RTS on all data/management packets
+ * a value > max MSDU size means no RTS
+ * else RTS for data/management frames where MPDU is larger
+ * than RTS value.
+ */
+#define DEFAULT_RTS_THRESHOLD 2347U
+#define MIN_RTS_THRESHOLD 0U
+#define MAX_RTS_THRESHOLD 2347U
+#define MAX_MSDU_SIZE 2304U
+#define MAX_MPDU_SIZE 2346U
+#define DEFAULT_BEACON_INTERVAL 100U
+#define DEFAULT_SHORT_RETRY_LIMIT 7U
+#define DEFAULT_LONG_RETRY_LIMIT 4U
+
+struct il_rx_buf {
+ dma_addr_t page_dma;
+ struct page *page;
+ struct list_head list;
+};
+
+#define rxb_addr(r) page_address(r->page)
+
+/* defined below */
+struct il_device_cmd;
+
+struct il_cmd_meta {
+ /* only for SYNC commands, iff the reply skb is wanted */
+ struct il_host_cmd *source;
+ /*
+ * only for ASYNC commands
+ * (which is somewhat stupid -- look at common.c for instance
+ * which duplicates a bunch of code because the callback isn't
+ * invoked for SYNC commands, if it were and its result passed
+ * through it would be simpler...)
+ */
+ void (*callback)(struct il_priv *il,
+ struct il_device_cmd *cmd,
+ struct il_rx_pkt *pkt);
+
+ /* The CMD_SIZE_HUGE flag bit indicates that the command
+ * structure is stored at the end of the shared queue memory. */
+ u32 flags;
+
+ DEFINE_DMA_UNMAP_ADDR(mapping);
+ DEFINE_DMA_UNMAP_LEN(len);
+};
+
+/*
+ * Generic queue structure
+ *
+ * Contains common data for Rx and Tx queues
+ */
+struct il_queue {
+ int n_bd; /* number of BDs in this queue */
+ int write_ptr; /* 1-st empty entry (idx) host_w*/
+ int read_ptr; /* last used entry (idx) host_r*/
+ /* use for monitoring and recovering the stuck queue */
+ dma_addr_t dma_addr; /* physical addr for BD's */
+ int n_win; /* safe queue win */
+ u32 id;
+ int low_mark; /* low watermark, resume queue if free
+ * space more than this */
+ int high_mark; /* high watermark, stop queue if free
+ * space less than this */
+};
+
+/* One for each TFD */
+struct il_tx_info {
+ struct sk_buff *skb;
+ struct il_rxon_context *ctx;
+};
+
+/**
+ * struct il_tx_queue - Tx Queue for DMA
+ * @q: generic Rx/Tx queue descriptor
+ * @bd: base of circular buffer of TFDs
+ * @cmd: array of command/TX buffer pointers
+ * @meta: array of meta data for each command/tx buffer
+ * @dma_addr_cmd: physical address of cmd/tx buffer array
+ * @txb: array of per-TFD driver data
+ * @time_stamp: time (in jiffies) of last read_ptr change
+ * @need_update: indicates need to update read/write idx
+ * @sched_retry: indicates queue is high-throughput aggregation (HT AGG) enabled
+ *
+ * A Tx queue consists of circular buffer of BDs (a.k.a. TFDs, transmit frame
+ * descriptors) and required locking structures.
+ */
+#define TFD_TX_CMD_SLOTS 256
+#define TFD_CMD_SLOTS 32
+
+struct il_tx_queue {
+ struct il_queue q;
+ void *tfds;
+ struct il_device_cmd **cmd;
+ struct il_cmd_meta *meta;
+ struct il_tx_info *txb;
+ unsigned long time_stamp;
+ u8 need_update;
+ u8 sched_retry;
+ u8 active;
+ u8 swq_id;
+};
+
+#define IL_NUM_SCAN_RATES (2)
+
+struct il4965_channel_tgd_info {
+ u8 type;
+ s8 max_power;
+};
+
+struct il4965_channel_tgh_info {
+ s64 last_radar_time;
+};
+
+#define IL4965_MAX_RATE (33)
+
+struct il3945_clip_group {
+ /* maximum power level to prevent clipping for each rate, derived by
+ * us from this band's saturation power in EEPROM */
+ const s8 clip_powers[IL_MAX_RATES];
+};
+
+/* current Tx power values to use, one for each rate for each channel.
+ * requested power is limited by:
+ * -- regulatory EEPROM limits for this channel
+ * -- hardware capabilities (clip-powers)
+ * -- spectrum management
+ * -- user preference (e.g. iwconfig)
+ * when requested power is set, base power idx must also be set. */
+struct il3945_channel_power_info {
+ struct il3945_tx_power tpc; /* actual radio and DSP gain settings */
+ s8 power_table_idx; /* actual (compenst'd) idx into gain table */
+ s8 base_power_idx; /* gain idx for power at factory temp. */
+ s8 requested_power; /* power (dBm) requested for this chnl/rate */
+};
+
+/* current scan Tx power values to use, one for each scan rate for each
+ * channel. */
+struct il3945_scan_power_info {
+ struct il3945_tx_power tpc; /* actual radio and DSP gain settings */
+ s8 power_table_idx; /* actual (compenst'd) idx into gain table */
+ s8 requested_power; /* scan pwr (dBm) requested for chnl/rate */
+};
+
+/*
+ * One for each channel, holds all channel setup data
+ * Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant
+ * with one another!
+ */
+struct il_channel_info {
+ struct il4965_channel_tgd_info tgd;
+ struct il4965_channel_tgh_info tgh;
+ struct il_eeprom_channel eeprom; /* EEPROM regulatory limit */
+ struct il_eeprom_channel ht40_eeprom; /* EEPROM regulatory limit for
+ * HT40 channel */
+
+ u8 channel; /* channel number */
+ u8 flags; /* flags copied from EEPROM */
+ s8 max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */
+ s8 curr_txpow; /* (dBm) regulatory/spectrum/user (not h/w) limit */
+ s8 min_power; /* always 0 */
+ s8 scan_power; /* (dBm) regul. eeprom, direct scans, any rate */
+
+ u8 group_idx; /* 0-4, maps channel to group1/2/3/4/5 */
+ u8 band_idx; /* 0-4, maps channel to band1/2/3/4/5 */
+ enum ieee80211_band band;
+
+ /* HT40 channel info */
+ s8 ht40_max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */
+ u8 ht40_flags; /* flags copied from EEPROM */
+ u8 ht40_extension_channel; /* HT_IE_EXT_CHANNEL_* */
+
+ /* Radio/DSP gain settings for each "normal" data Tx rate.
+ * These include, in addition to RF and DSP gain, a few fields for
+ * remembering/modifying gain settings (idxes). */
+ struct il3945_channel_power_info power_info[IL4965_MAX_RATE];
+
+ /* Radio/DSP gain settings for each scan rate, for directed scans. */
+ struct il3945_scan_power_info scan_pwr_info[IL_NUM_SCAN_RATES];
+};
+
+#define IL_TX_FIFO_BK 0 /* shared */
+#define IL_TX_FIFO_BE 1
+#define IL_TX_FIFO_VI 2 /* shared */
+#define IL_TX_FIFO_VO 3
+#define IL_TX_FIFO_UNUSED -1
+
+/* Minimum number of queues. MAX_NUM is defined in hw specific files.
+ * Set the minimum to accommodate the 4 standard TX queues, 1 command
+ * queue, 2 (unused) HCCA queues, and 4 HT queues (one for each AC) */
+#define IL_MIN_NUM_QUEUES 10
+
+#define IL_DEFAULT_CMD_QUEUE_NUM 4
+
+#define IEEE80211_DATA_LEN 2304
+#define IEEE80211_4ADDR_LEN 30
+#define IEEE80211_HLEN (IEEE80211_4ADDR_LEN)
+#define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN)
+
+struct il_frame {
+ union {
+ struct ieee80211_hdr frame;
+ struct il_tx_beacon_cmd beacon;
+ u8 raw[IEEE80211_FRAME_LEN];
+ u8 cmd[360];
+ } u;
+ struct list_head list;
+};
+
+#define SEQ_TO_SN(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4)
+#define SN_TO_SEQ(ssn) (((ssn) << 4) & IEEE80211_SCTL_SEQ)
+#define MAX_SN ((IEEE80211_SCTL_SEQ) >> 4)
+
+enum {
+ CMD_SYNC = 0,
+ CMD_SIZE_NORMAL = 0,
+ CMD_NO_SKB = 0,
+ CMD_SIZE_HUGE = (1 << 0),
+ CMD_ASYNC = (1 << 1),
+ CMD_WANT_SKB = (1 << 2),
+ CMD_MAPPED = (1 << 3),
+};
+
+#define DEF_CMD_PAYLOAD_SIZE 320
+
+/**
+ * struct il_device_cmd
+ *
+ * For allocation of the command and tx queues, this establishes the overall
+ * size of the largest command we send to uCode, except for a scan command
+ * (which is relatively huge; space is allocated separately).
+ */
+struct il_device_cmd {
+ struct il_cmd_header hdr; /* uCode API */
+ union {
+ u32 flags;
+ u8 val8;
+ u16 val16;
+ u32 val32;
+ struct il_tx_cmd tx;
+ u8 payload[DEF_CMD_PAYLOAD_SIZE];
+ } __packed cmd;
+} __packed;
+
+#define TFD_MAX_PAYLOAD_SIZE (sizeof(struct il_device_cmd))
+
+
+struct il_host_cmd {
+ const void *data;
+ unsigned long reply_page;
+ void (*callback)(struct il_priv *il,
+ struct il_device_cmd *cmd,
+ struct il_rx_pkt *pkt);
+ u32 flags;
+ u16 len;
+ u8 id;
+};
+
+#define SUP_RATE_11A_MAX_NUM_CHANNELS 8
+#define SUP_RATE_11B_MAX_NUM_CHANNELS 4
+#define SUP_RATE_11G_MAX_NUM_CHANNELS 12
+
+/**
+ * struct il_rx_queue - Rx queue
+ * @bd: driver's pointer to buffer of receive buffer descriptors (rbd)
+ * @bd_dma: bus address of buffer of receive buffer descriptors (rbd)
+ * @read: Shared idx to newest available Rx buffer
+ * @write: Shared idx to oldest written Rx packet
+ * @free_count: Number of pre-allocated buffers in rx_free
+ * @rx_free: list of free SKBs for use
+ * @rx_used: List of Rx buffers with no SKB
+ * @need_update: flag to indicate we need to update read/write idx
+ * @rb_stts: driver's pointer to receive buffer status
+ * @rb_stts_dma: bus address of receive buffer status
+ *
+ * NOTE: rx_free and rx_used are used as a FIFO for il_rx_bufs
+ */
+struct il_rx_queue {
+ __le32 *bd;
+ dma_addr_t bd_dma;
+ struct il_rx_buf pool[RX_QUEUE_SIZE + RX_FREE_BUFFERS];
+ struct il_rx_buf *queue[RX_QUEUE_SIZE];
+ u32 read;
+ u32 write;
+ u32 free_count;
+ u32 write_actual;
+ struct list_head rx_free;
+ struct list_head rx_used;
+ int need_update;
+ struct il_rb_status *rb_stts;
+ dma_addr_t rb_stts_dma;
+ spinlock_t lock;
+};
+
+#define IL_SUPPORTED_RATES_IE_LEN 8
+
+#define MAX_TID_COUNT 9
+
+#define IL_INVALID_RATE 0xFF
+#define IL_INVALID_VALUE -1
+
+/**
+ * struct il_ht_agg -- aggregation status while waiting for block-ack
+ * @txq_id: Tx queue used for Tx attempt
+ * @frame_count: # frames attempted by Tx command
+ * @wait_for_ba: Expect block-ack before next Tx reply
+ * @start_idx: Index of 1st Transmit Frame Descriptor (TFD) in Tx win
+ * @bitmap0: Low order bitmap, one bit for each frame pending ACK in Tx win
+ * @bitmap1: High order, one bit for each frame pending ACK in Tx win
+ * @rate_n_flags: Rate at which Tx was attempted
+ *
+ * If C_TX indicates that aggregation was attempted, driver must wait
+ * for block ack (N_COMPRESSED_BA). This struct stores tx reply info
+ * until block ack arrives.
+ */
+struct il_ht_agg {
+ u16 txq_id;
+ u16 frame_count;
+ u16 wait_for_ba;
+ u16 start_idx;
+ u64 bitmap;
+ u32 rate_n_flags;
+#define IL_AGG_OFF 0
+#define IL_AGG_ON 1
+#define IL_EMPTYING_HW_QUEUE_ADDBA 2
+#define IL_EMPTYING_HW_QUEUE_DELBA 3
+ u8 state;
+};
+
+
+struct il_tid_data {
+ u16 seq_number; /* 4965 only */
+ u16 tfds_in_queue;
+ struct il_ht_agg agg;
+};
+
+struct il_hw_key {
+ u32 cipher;
+ int keylen;
+ u8 keyidx;
+ u8 key[32];
+};
+
+union il_ht_rate_supp {
+ u16 rates;
+ struct {
+ u8 siso_rate;
+ u8 mimo_rate;
+ };
+};
+
+#define CFG_HT_RX_AMPDU_FACTOR_8K (0x0)
+#define CFG_HT_RX_AMPDU_FACTOR_16K (0x1)
+#define CFG_HT_RX_AMPDU_FACTOR_32K (0x2)
+#define CFG_HT_RX_AMPDU_FACTOR_64K (0x3)
+#define CFG_HT_RX_AMPDU_FACTOR_DEF CFG_HT_RX_AMPDU_FACTOR_64K
+#define CFG_HT_RX_AMPDU_FACTOR_MAX CFG_HT_RX_AMPDU_FACTOR_64K
+#define CFG_HT_RX_AMPDU_FACTOR_MIN CFG_HT_RX_AMPDU_FACTOR_8K
+
+/*
+ * Maximal MPDU density for TX aggregation
+ * 4 - 2us density
+ * 5 - 4us density
+ * 6 - 8us density
+ * 7 - 16us density
+ */
+#define CFG_HT_MPDU_DENSITY_2USEC (0x4)
+#define CFG_HT_MPDU_DENSITY_4USEC (0x5)
+#define CFG_HT_MPDU_DENSITY_8USEC (0x6)
+#define CFG_HT_MPDU_DENSITY_16USEC (0x7)
+#define CFG_HT_MPDU_DENSITY_DEF CFG_HT_MPDU_DENSITY_4USEC
+#define CFG_HT_MPDU_DENSITY_MAX CFG_HT_MPDU_DENSITY_16USEC
+#define CFG_HT_MPDU_DENSITY_MIN (0x1)
+
+struct il_ht_config {
+ bool single_chain_sufficient;
+ enum ieee80211_smps_mode smps; /* current smps mode */
+};
+
+/* QoS structures */
+struct il_qos_info {
+ int qos_active;
+ struct il_qosparam_cmd def_qos_parm;
+};
+
+/*
+ * Structure should be accessed with sta_lock held. When station addition
+ * is in progress (IL_STA_UCODE_INPROGRESS) it is possible to access only
+ * the commands (il_addsta_cmd and il_link_quality_cmd) without
+ * sta_lock held.
+ */
+struct il_station_entry {
+ struct il_addsta_cmd sta;
+ struct il_tid_data tid[MAX_TID_COUNT];
+ u8 used, ctxid;
+ struct il_hw_key keyinfo;
+ struct il_link_quality_cmd *lq;
+};
+
+struct il_station_priv_common {
+ struct il_rxon_context *ctx;
+ u8 sta_id;
+};
+
+/*
+ * il_station_priv: Driver's ilate station information
+ *
+ * When mac80211 creates a station it reserves some space (hw->sta_data_size)
+ * in the structure for use by driver. This structure is places in that
+ * space.
+ *
+ * The common struct MUST be first because it is shared between
+ * 3945 and 4965!
+ */
+struct il_station_priv {
+ struct il_station_priv_common common;
+ struct il_lq_sta lq_sta;
+ atomic_t pending_frames;
+ bool client;
+ bool asleep;
+};
+
+/**
+ * struct il_vif_priv - driver's ilate per-interface information
+ *
+ * When mac80211 allocates a virtual interface, it can allocate
+ * space for us to put data into.
+ */
+struct il_vif_priv {
+ struct il_rxon_context *ctx;
+ u8 ibss_bssid_sta_id;
+};
+
+/* one for each uCode image (inst/data, boot/init/runtime) */
+struct fw_desc {
+ void *v_addr; /* access by driver */
+ dma_addr_t p_addr; /* access by card's busmaster DMA */
+ u32 len; /* bytes */
+};
+
+/* uCode file layout */
+struct il_ucode_header {
+ __le32 ver; /* major/minor/API/serial */
+ struct {
+ __le32 inst_size; /* bytes of runtime code */
+ __le32 data_size; /* bytes of runtime data */
+ __le32 init_size; /* bytes of init code */
+ __le32 init_data_size; /* bytes of init data */
+ __le32 boot_size; /* bytes of bootstrap code */
+ u8 data[0]; /* in same order as sizes */
+ } v1;
+};
+
+struct il4965_ibss_seq {
+ u8 mac[ETH_ALEN];
+ u16 seq_num;
+ u16 frag_num;
+ unsigned long packet_time;
+ struct list_head list;
+};
+
+struct il_sensitivity_ranges {
+ u16 min_nrg_cck;
+ u16 max_nrg_cck;
+
+ u16 nrg_th_cck;
+ u16 nrg_th_ofdm;
+
+ u16 auto_corr_min_ofdm;
+ u16 auto_corr_min_ofdm_mrc;
+ u16 auto_corr_min_ofdm_x1;
+ u16 auto_corr_min_ofdm_mrc_x1;
+
+ u16 auto_corr_max_ofdm;
+ u16 auto_corr_max_ofdm_mrc;
+ u16 auto_corr_max_ofdm_x1;
+ u16 auto_corr_max_ofdm_mrc_x1;
+
+ u16 auto_corr_max_cck;
+ u16 auto_corr_max_cck_mrc;
+ u16 auto_corr_min_cck;
+ u16 auto_corr_min_cck_mrc;
+
+ u16 barker_corr_th_min;
+ u16 barker_corr_th_min_mrc;
+ u16 nrg_th_cca;
+};
+
+
+#define KELVIN_TO_CELSIUS(x) ((x)-273)
+#define CELSIUS_TO_KELVIN(x) ((x)+273)
+
+
+/**
+ * struct il_hw_params
+ * @max_txq_num: Max # Tx queues supported
+ * @dma_chnl_num: Number of Tx DMA/FIFO channels
+ * @scd_bc_tbls_size: size of scheduler byte count tables
+ * @tfd_size: TFD size
+ * @tx/rx_chains_num: Number of TX/RX chains
+ * @valid_tx/rx_ant: usable antennas
+ * @max_rxq_size: Max # Rx frames in Rx queue (must be power-of-2)
+ * @max_rxq_log: Log-base-2 of max_rxq_size
+ * @rx_page_order: Rx buffer page order
+ * @rx_wrt_ptr_reg: FH{39}_RSCSR_CHNL0_WPTR
+ * @max_stations:
+ * @ht40_channel: is 40MHz width possible in band 2.4
+ * BIT(IEEE80211_BAND_5GHZ) BIT(IEEE80211_BAND_5GHZ)
+ * @sw_crypto: 0 for hw, 1 for sw
+ * @max_xxx_size: for ucode uses
+ * @ct_kill_threshold: temperature threshold
+ * @beacon_time_tsf_bits: number of valid tsf bits for beacon time
+ * @struct il_sensitivity_ranges: range of sensitivity values
+ */
+struct il_hw_params {
+ u8 max_txq_num;
+ u8 dma_chnl_num;
+ u16 scd_bc_tbls_size;
+ u32 tfd_size;
+ u8 tx_chains_num;
+ u8 rx_chains_num;
+ u8 valid_tx_ant;
+ u8 valid_rx_ant;
+ u16 max_rxq_size;
+ u16 max_rxq_log;
+ u32 rx_page_order;
+ u32 rx_wrt_ptr_reg;
+ u8 max_stations;
+ u8 ht40_channel;
+ u8 max_beacon_itrvl; /* in 1024 ms */
+ u32 max_inst_size;
+ u32 max_data_size;
+ u32 max_bsm_size;
+ u32 ct_kill_threshold; /* value in hw-dependent units */
+ u16 beacon_time_tsf_bits;
+ const struct il_sensitivity_ranges *sens;
+};
+
+
+/******************************************************************************
+ *
+ * Functions implemented in core module which are forward declared here
+ * for use by iwl-[4-5].c
+ *
+ * NOTE: The implementation of these functions are not hardware specific
+ * which is why they are in the core module files.
+ *
+ * Naming convention --
+ * il_ <-- Is part of iwlwifi
+ * iwlXXXX_ <-- Hardware specific (implemented in iwl-XXXX.c for XXXX)
+ * il4965_bg_ <-- Called from work queue context
+ * il4965_mac_ <-- mac80211 callback
+ *
+ ****************************************************************************/
+extern void il4965_update_chain_flags(struct il_priv *il);
+extern const u8 il_bcast_addr[ETH_ALEN];
+extern int il_queue_space(const struct il_queue *q);
+static inline int il_queue_used(const struct il_queue *q, int i)
+{
+ return q->write_ptr >= q->read_ptr ?
+ (i >= q->read_ptr && i < q->write_ptr) :
+ !(i < q->read_ptr && i >= q->write_ptr);
+}
+
+
+static inline u8 il_get_cmd_idx(struct il_queue *q, u32 idx,
+ int is_huge)
+{
+ /*
+ * This is for init calibration result and scan command which
+ * required buffer > TFD_MAX_PAYLOAD_SIZE,
+ * the big buffer at end of command array
+ */
+ if (is_huge)
+ return q->n_win; /* must be power of 2 */
+
+ /* Otherwise, use normal size buffers */
+ return idx & (q->n_win - 1);
+}
+
+
+struct il_dma_ptr {
+ dma_addr_t dma;
+ void *addr;
+ size_t size;
+};
+
+#define IL_OPERATION_MODE_AUTO 0
+#define IL_OPERATION_MODE_HT_ONLY 1
+#define IL_OPERATION_MODE_MIXED 2
+#define IL_OPERATION_MODE_20MHZ 3
+
+#define IL_TX_CRC_SIZE 4
+#define IL_TX_DELIMITER_SIZE 4
+
+#define TX_POWER_IL_ILLEGAL_VOLTAGE -10000
+
+/* Sensitivity and chain noise calibration */
+#define INITIALIZATION_VALUE 0xFFFF
+#define IL4965_CAL_NUM_BEACONS 20
+#define IL_CAL_NUM_BEACONS 16
+#define MAXIMUM_ALLOWED_PATHLOSS 15
+
+#define CHAIN_NOISE_MAX_DELTA_GAIN_CODE 3
+
+#define MAX_FA_OFDM 50
+#define MIN_FA_OFDM 5
+#define MAX_FA_CCK 50
+#define MIN_FA_CCK 5
+
+#define AUTO_CORR_STEP_OFDM 1
+
+#define AUTO_CORR_STEP_CCK 3
+#define AUTO_CORR_MAX_TH_CCK 160
+
+#define NRG_DIFF 2
+#define NRG_STEP_CCK 2
+#define NRG_MARGIN 8
+#define MAX_NUMBER_CCK_NO_FA 100
+
+#define AUTO_CORR_CCK_MIN_VAL_DEF (125)
+
+#define CHAIN_A 0
+#define CHAIN_B 1
+#define CHAIN_C 2
+#define CHAIN_NOISE_DELTA_GAIN_INIT_VAL 4
+#define ALL_BAND_FILTER 0xFF00
+#define IN_BAND_FILTER 0xFF
+#define MIN_AVERAGE_NOISE_MAX_VALUE 0xFFFFFFFF
+
+#define NRG_NUM_PREV_STAT_L 20
+#define NUM_RX_CHAINS 3
+
+enum il4965_false_alarm_state {
+ IL_FA_TOO_MANY = 0,
+ IL_FA_TOO_FEW = 1,
+ IL_FA_GOOD_RANGE = 2,
+};
+
+enum il4965_chain_noise_state {
+ IL_CHAIN_NOISE_ALIVE = 0, /* must be 0 */
+ IL_CHAIN_NOISE_ACCUMULATE,
+ IL_CHAIN_NOISE_CALIBRATED,
+ IL_CHAIN_NOISE_DONE,
+};
+
+enum il4965_calib_enabled_state {
+ IL_CALIB_DISABLED = 0, /* must be 0 */
+ IL_CALIB_ENABLED = 1,
+};
+
+/*
+ * enum il_calib
+ * defines the order in which results of initial calibrations
+ * should be sent to the runtime uCode
+ */
+enum il_calib {
+ IL_CALIB_MAX,
+};
+
+/* Opaque calibration results */
+struct il_calib_result {
+ void *buf;
+ size_t buf_len;
+};
+
+enum ucode_type {
+ UCODE_NONE = 0,
+ UCODE_INIT,
+ UCODE_RT
+};
+
+/* Sensitivity calib data */
+struct il_sensitivity_data {
+ u32 auto_corr_ofdm;
+ u32 auto_corr_ofdm_mrc;
+ u32 auto_corr_ofdm_x1;
+ u32 auto_corr_ofdm_mrc_x1;
+ u32 auto_corr_cck;
+ u32 auto_corr_cck_mrc;
+
+ u32 last_bad_plcp_cnt_ofdm;
+ u32 last_fa_cnt_ofdm;
+ u32 last_bad_plcp_cnt_cck;
+ u32 last_fa_cnt_cck;
+
+ u32 nrg_curr_state;
+ u32 nrg_prev_state;
+ u32 nrg_value[10];
+ u8 nrg_silence_rssi[NRG_NUM_PREV_STAT_L];
+ u32 nrg_silence_ref;
+ u32 nrg_energy_idx;
+ u32 nrg_silence_idx;
+ u32 nrg_th_cck;
+ s32 nrg_auto_corr_silence_diff;
+ u32 num_in_cck_no_fa;
+ u32 nrg_th_ofdm;
+
+ u16 barker_corr_th_min;
+ u16 barker_corr_th_min_mrc;
+ u16 nrg_th_cca;
+};
+
+/* Chain noise (differential Rx gain) calib data */
+struct il_chain_noise_data {
+ u32 active_chains;
+ u32 chain_noise_a;
+ u32 chain_noise_b;
+ u32 chain_noise_c;
+ u32 chain_signal_a;
+ u32 chain_signal_b;
+ u32 chain_signal_c;
+ u16 beacon_count;
+ u8 disconn_array[NUM_RX_CHAINS];
+ u8 delta_gain_code[NUM_RX_CHAINS];
+ u8 radio_write;
+ u8 state;
+};
+
+#define EEPROM_SEM_TIMEOUT 10 /* milliseconds */
+#define EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */
+
+#define IL_TRAFFIC_ENTRIES (256)
+#define IL_TRAFFIC_ENTRY_SIZE (64)
+
+enum {
+ MEASUREMENT_READY = (1 << 0),
+ MEASUREMENT_ACTIVE = (1 << 1),
+};
+
+/* interrupt stats */
+struct isr_stats {
+ u32 hw;
+ u32 sw;
+ u32 err_code;
+ u32 sch;
+ u32 alive;
+ u32 rfkill;
+ u32 ctkill;
+ u32 wakeup;
+ u32 rx;
+ u32 handlers[IL_CN_MAX];
+ u32 tx;
+ u32 unhandled;
+};
+
+/* management stats */
+enum il_mgmt_stats {
+ MANAGEMENT_ASSOC_REQ = 0,
+ MANAGEMENT_ASSOC_RESP,
+ MANAGEMENT_REASSOC_REQ,
+ MANAGEMENT_REASSOC_RESP,
+ MANAGEMENT_PROBE_REQ,
+ MANAGEMENT_PROBE_RESP,
+ MANAGEMENT_BEACON,
+ MANAGEMENT_ATIM,
+ MANAGEMENT_DISASSOC,
+ MANAGEMENT_AUTH,
+ MANAGEMENT_DEAUTH,
+ MANAGEMENT_ACTION,
+ MANAGEMENT_MAX,
+};
+/* control stats */
+enum il_ctrl_stats {
+ CONTROL_BACK_REQ = 0,
+ CONTROL_BACK,
+ CONTROL_PSPOLL,
+ CONTROL_RTS,
+ CONTROL_CTS,
+ CONTROL_ACK,
+ CONTROL_CFEND,
+ CONTROL_CFENDACK,
+ CONTROL_MAX,
+};
+
+struct traffic_stats {
+#ifdef CONFIG_IWLEGACY_DEBUGFS
+ u32 mgmt[MANAGEMENT_MAX];
+ u32 ctrl[CONTROL_MAX];
+ u32 data_cnt;
+ u64 data_bytes;
+#endif
+};
+
+/*
+ * host interrupt timeout value
+ * used with setting interrupt coalescing timer
+ * the CSR_INT_COALESCING is an 8 bit register in 32-usec unit
+ *
+ * default interrupt coalescing timer is 64 x 32 = 2048 usecs
+ * default interrupt coalescing calibration timer is 16 x 32 = 512 usecs
+ */
+#define IL_HOST_INT_TIMEOUT_MAX (0xFF)
+#define IL_HOST_INT_TIMEOUT_DEF (0x40)
+#define IL_HOST_INT_TIMEOUT_MIN (0x0)
+#define IL_HOST_INT_CALIB_TIMEOUT_MAX (0xFF)
+#define IL_HOST_INT_CALIB_TIMEOUT_DEF (0x10)
+#define IL_HOST_INT_CALIB_TIMEOUT_MIN (0x0)
+
+#define IL_DELAY_NEXT_FORCE_FW_RELOAD (HZ*5)
+
+/* TX queue watchdog timeouts in mSecs */
+#define IL_DEF_WD_TIMEOUT (2000)
+#define IL_LONG_WD_TIMEOUT (10000)
+#define IL_MAX_WD_TIMEOUT (120000)
+
+struct il_force_reset {
+ int reset_request_count;
+ int reset_success_count;
+ int reset_reject_count;
+ unsigned long reset_duration;
+ unsigned long last_force_reset_jiffies;
+};
+
+/* extend beacon time format bit shifting */
+/*
+ * for _3945 devices
+ * bits 31:24 - extended
+ * bits 23:0 - interval
+ */
+#define IL3945_EXT_BEACON_TIME_POS 24
+/*
+ * for _4965 devices
+ * bits 31:22 - extended
+ * bits 21:0 - interval
+ */
+#define IL4965_EXT_BEACON_TIME_POS 22
+
+struct il_rxon_context {
+ struct ieee80211_vif *vif;
+
+ const u8 *ac_to_fifo;
+ const u8 *ac_to_queue;
+ u8 mcast_queue;
+
+ /*
+ * We could use the vif to indicate active, but we
+ * also need it to be active during disabling when
+ * we already removed the vif for type setting.
+ */
+ bool always_active, is_active;
+
+ bool ht_need_multiple_chains;
+
+ int ctxid;
+
+ u32 interface_modes, exclusive_interface_modes;
+ u8 unused_devtype, ap_devtype, ibss_devtype, station_devtype;
+
+ /*
+ * We declare this const so it can only be
+ * changed via explicit cast within the
+ * routines that actually update the physical
+ * hardware.
+ */
+ const struct il_rxon_cmd active;
+ struct il_rxon_cmd staging;
+
+ struct il_rxon_time_cmd timing;
+
+ struct il_qos_info qos_data;
+
+ u8 bcast_sta_id, ap_sta_id;
+
+ u8 rxon_cmd, rxon_assoc_cmd, rxon_timing_cmd;
+ u8 qos_cmd;
+ u8 wep_key_cmd;
+
+ struct il_wep_key wep_keys[WEP_KEYS_MAX];
+ u8 key_mapping_keys;
+
+ __le32 station_flags;
+
+ struct {
+ bool non_gf_sta_present;
+ u8 protection;
+ bool enabled, is_40mhz;
+ u8 extension_chan_offset;
+ } ht;
+};
+
+struct il_priv {
+
+ /* ieee device used by generic ieee processing code */
+ struct ieee80211_hw *hw;
+ struct ieee80211_channel *ieee_channels;
+ struct ieee80211_rate *ieee_rates;
+ struct il_cfg *cfg;
+
+ /* temporary frame storage list */
+ struct list_head free_frames;
+ int frames_count;
+
+ enum ieee80211_band band;
+ int alloc_rxb_page;
+
+ void (*handlers[IL_CN_MAX])(struct il_priv *il,
+ struct il_rx_buf *rxb);
+
+ struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS];
+
+ /* spectrum measurement report caching */
+ struct il_spectrum_notification measure_report;
+ u8 measurement_status;
+
+ /* ucode beacon time */
+ u32 ucode_beacon_time;
+ int missed_beacon_threshold;
+
+ /* track IBSS manager (last beacon) status */
+ u32 ibss_manager;
+
+ /* force reset */
+ struct il_force_reset force_reset;
+
+ /* we allocate array of il_channel_info for NIC's valid channels.
+ * Access via channel # using indirect idx array */
+ struct il_channel_info *channel_info; /* channel info array */
+ u8 channel_count; /* # of channels */
+
+ /* thermal calibration */
+ s32 temperature; /* degrees Kelvin */
+ s32 last_temperature;
+
+ /* init calibration results */
+ struct il_calib_result calib_results[IL_CALIB_MAX];
+
+ /* Scan related variables */
+ unsigned long scan_start;
+ unsigned long scan_start_tsf;
+ void *scan_cmd;
+ enum ieee80211_band scan_band;
+ struct cfg80211_scan_request *scan_request;
+ struct ieee80211_vif *scan_vif;
+ u8 scan_tx_ant[IEEE80211_NUM_BANDS];
+ u8 mgmt_tx_ant;
+
+ /* spinlock */
+ spinlock_t lock; /* protect general shared data */
+ spinlock_t hcmd_lock; /* protect hcmd */
+ spinlock_t reg_lock; /* protect hw register access */
+ struct mutex mutex;
+
+ /* basic pci-network driver stuff */
+ struct pci_dev *pci_dev;
+
+ /* pci hardware address support */
+ void __iomem *hw_base;
+ u32 hw_rev;
+ u32 hw_wa_rev;
+ u8 rev_id;
+
+ /* command queue number */
+ u8 cmd_queue;
+
+ /* max number of station keys */
+ u8 sta_key_max_num;
+
+ /* EEPROM MAC addresses */
+ struct mac_address addresses[1];
+
+ /* uCode images, save to reload in case of failure */
+ int fw_idx; /* firmware we're trying to load */
+ u32 ucode_ver; /* version of ucode, copy of
+ il_ucode.ver */
+ struct fw_desc ucode_code; /* runtime inst */
+ struct fw_desc ucode_data; /* runtime data original */
+ struct fw_desc ucode_data_backup; /* runtime data save/restore */
+ struct fw_desc ucode_init; /* initialization inst */
+ struct fw_desc ucode_init_data; /* initialization data */
+ struct fw_desc ucode_boot; /* bootstrap inst */
+ enum ucode_type ucode_type;
+ u8 ucode_write_complete; /* the image write is complete */
+ char firmware_name[25];
+
+ struct il_rxon_context ctx;
+
+ __le16 switch_channel;
+
+ /* 1st responses from initialize and runtime uCode images.
+ * _4965's initialize alive response contains some calibration data. */
+ struct il_init_alive_resp card_alive_init;
+ struct il_alive_resp card_alive;
+
+ u16 active_rate;
+
+ u8 start_calib;
+ struct il_sensitivity_data sensitivity_data;
+ struct il_chain_noise_data chain_noise_data;
+ __le16 sensitivity_tbl[HD_TBL_SIZE];
+
+ struct il_ht_config current_ht_config;
+
+ /* Rate scaling data */
+ u8 retry_rate;
+
+ wait_queue_head_t wait_command_queue;
+
+ int activity_timer_active;
+
+ /* Rx and Tx DMA processing queues */
+ struct il_rx_queue rxq;
+ struct il_tx_queue *txq;
+ unsigned long txq_ctx_active_msk;
+ struct il_dma_ptr kw; /* keep warm address */
+ struct il_dma_ptr scd_bc_tbls;
+
+ u32 scd_base_addr; /* scheduler sram base address */
+
+ unsigned long status;
+
+ /* counts mgmt, ctl, and data packets */
+ struct traffic_stats tx_stats;
+ struct traffic_stats rx_stats;
+
+ /* counts interrupts */
+ struct isr_stats isr_stats;
+
+ struct il_power_mgr power_data;
+
+ /* context information */
+ u8 bssid[ETH_ALEN]; /* used only on 3945 but filled by core */
+
+ /* station table variables */
+
+ /* Note: if lock and sta_lock are needed, lock must be acquired first */
+ spinlock_t sta_lock;
+ int num_stations;
+ struct il_station_entry stations[IL_STATION_COUNT];
+ unsigned long ucode_key_table;
+
+ /* queue refcounts */
+#define IL_MAX_HW_QUEUES 32
+ unsigned long queue_stopped[BITS_TO_LONGS(IL_MAX_HW_QUEUES)];
+ /* for each AC */
+ atomic_t queue_stop_count[4];
+
+ /* Indication if ieee80211_ops->open has been called */
+ u8 is_open;
+
+ u8 mac80211_registered;
+
+ /* eeprom -- this is in the card's little endian byte order */
+ u8 *eeprom;
+ struct il_eeprom_calib_info *calib_info;
+
+ enum nl80211_iftype iw_mode;
+
+ /* Last Rx'd beacon timestamp */
+ u64 timestamp;
+
+ union {
+#if defined(CONFIG_IWL3945) || defined(CONFIG_IWL3945_MODULE)
+ struct {
+ void *shared_virt;
+ dma_addr_t shared_phys;
+
+ struct delayed_work thermal_periodic;
+ struct delayed_work rfkill_poll;
+
+ struct il3945_notif_stats stats;
+#ifdef CONFIG_IWLEGACY_DEBUGFS
+ struct il3945_notif_stats accum_stats;
+ struct il3945_notif_stats delta_stats;
+ struct il3945_notif_stats max_delta;
+#endif
+
+ u32 sta_supp_rates;
+ int last_rx_rssi; /* From Rx packet stats */
+
+ /* Rx'd packet timing information */
+ u32 last_beacon_time;
+ u64 last_tsf;
+
+ /*
+ * each calibration channel group in the
+ * EEPROM has a derived clip setting for
+ * each rate.
+ */
+ const struct il3945_clip_group clip_groups[5];
+
+ } _3945;
+#endif
+#if defined(CONFIG_IWL4965) || defined(CONFIG_IWL4965_MODULE)
+ struct {
+ struct il_rx_phy_res last_phy_res;
+ bool last_phy_res_valid;
+
+ struct completion firmware_loading_complete;
+
+ /*
+ * chain noise reset and gain commands are the
+ * two extra calibration commands follows the standard
+ * phy calibration commands
+ */
+ u8 phy_calib_chain_noise_reset_cmd;
+ u8 phy_calib_chain_noise_gain_cmd;
+
+ struct il_notif_stats stats;
+#ifdef CONFIG_IWLEGACY_DEBUGFS
+ struct il_notif_stats accum_stats;
+ struct il_notif_stats delta_stats;
+ struct il_notif_stats max_delta;
+#endif
+
+ } _4965;
+#endif
+ };
+
+ struct il_hw_params hw_params;
+
+ u32 inta_mask;
+
+ struct workqueue_struct *workqueue;
+
+ struct work_struct restart;
+ struct work_struct scan_completed;
+ struct work_struct rx_replenish;
+ struct work_struct abort_scan;
+
+ struct il_rxon_context *beacon_ctx;
+ struct sk_buff *beacon_skb;
+
+ struct work_struct tx_flush;
+
+ struct tasklet_struct irq_tasklet;
+
+ struct delayed_work init_alive_start;
+ struct delayed_work alive_start;
+ struct delayed_work scan_check;
+
+ /* TX Power */
+ s8 tx_power_user_lmt;
+ s8 tx_power_device_lmt;
+ s8 tx_power_next;
+
+
+#ifdef CONFIG_IWLEGACY_DEBUG
+ /* debugging info */
+ u32 debug_level; /* per device debugging will override global
+ il_debug_level if set */
+#endif /* CONFIG_IWLEGACY_DEBUG */
+#ifdef CONFIG_IWLEGACY_DEBUGFS
+ /* debugfs */
+ u16 tx_traffic_idx;
+ u16 rx_traffic_idx;
+ u8 *tx_traffic;
+ u8 *rx_traffic;
+ struct dentry *debugfs_dir;
+ u32 dbgfs_sram_offset, dbgfs_sram_len;
+ bool disable_ht40;
+#endif /* CONFIG_IWLEGACY_DEBUGFS */
+
+ struct work_struct txpower_work;
+ u32 disable_sens_cal;
+ u32 disable_chain_noise_cal;
+ u32 disable_tx_power_cal;
+ struct work_struct run_time_calib_work;
+ struct timer_list stats_periodic;
+ struct timer_list watchdog;
+ bool hw_ready;
+
+ struct led_classdev led;
+ unsigned long blink_on, blink_off;
+ bool led_registered;
+}; /*il_priv */
+
+static inline void il_txq_ctx_activate(struct il_priv *il, int txq_id)
+{
+ set_bit(txq_id, &il->txq_ctx_active_msk);
+}
+
+static inline void il_txq_ctx_deactivate(struct il_priv *il, int txq_id)
+{
+ clear_bit(txq_id, &il->txq_ctx_active_msk);
+}
+
+#ifdef CONFIG_IWLEGACY_DEBUG
+/*
+ * il_get_debug_level: Return active debug level for device
+ *
+ * Using sysfs it is possible to set per device debug level. This debug
+ * level will be used if set, otherwise the global debug level which can be
+ * set via module parameter is used.
+ */
+static inline u32 il_get_debug_level(struct il_priv *il)
+{
+ if (il->debug_level)
+ return il->debug_level;
+ else
+ return il_debug_level;
+}
+#else
+static inline u32 il_get_debug_level(struct il_priv *il)
+{
+ return il_debug_level;
+}
+#endif
-#ifndef __il_core_h__
-#define __il_core_h__
-/************************
- * forward declarations *
- ************************/
-struct il_host_cmd;
-struct il_cmd;
+static inline struct ieee80211_hdr *
+il_tx_queue_get_hdr(struct il_priv *il,
+ int txq_id, int idx)
+{
+ if (il->txq[txq_id].txb[idx].skb)
+ return (struct ieee80211_hdr *)il->txq[txq_id].
+ txb[idx].skb->data;
+ return NULL;
+}
+
+static inline struct il_rxon_context *
+il_rxon_ctx_from_vif(struct ieee80211_vif *vif)
+{
+ struct il_vif_priv *vif_priv = (void *)vif->drv_priv;
+
+ return vif_priv->ctx;
+}
+
+#define for_each_context(il, _ctx) \
+ for (_ctx = &il->ctx; _ctx == &il->ctx; _ctx++)
+
+static inline int il_is_associated(struct il_priv *il)
+{
+ return (il->ctx.active.filter_flags & RXON_FILTER_ASSOC_MSK) ? 1 : 0;
+}
+
+static inline int il_is_any_associated(struct il_priv *il)
+{
+ return il_is_associated(il);
+}
+
+static inline int il_is_associated_ctx(struct il_rxon_context *ctx)
+{
+ return (ctx->active.filter_flags & RXON_FILTER_ASSOC_MSK) ? 1 : 0;
+}
+
+static inline int il_is_channel_valid(const struct il_channel_info *ch_info)
+{
+ if (ch_info == NULL)
+ return 0;
+ return (ch_info->flags & EEPROM_CHANNEL_VALID) ? 1 : 0;
+}
+
+static inline int il_is_channel_radar(const struct il_channel_info *ch_info)
+{
+ return (ch_info->flags & EEPROM_CHANNEL_RADAR) ? 1 : 0;
+}
+
+static inline u8 il_is_channel_a_band(const struct il_channel_info *ch_info)
+{
+ return ch_info->band == IEEE80211_BAND_5GHZ;
+}
+
+static inline int
+il_is_channel_passive(const struct il_channel_info *ch)
+{
+ return (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) ? 1 : 0;
+}
+
+static inline int
+il_is_channel_ibss(const struct il_channel_info *ch)
+{
+ return (ch->flags & EEPROM_CHANNEL_IBSS) ? 1 : 0;
+}
+static inline void
+__il_free_pages(struct il_priv *il, struct page *page)
+{
+ __free_pages(page, il->hw_params.rx_page_order);
+ il->alloc_rxb_page--;
+}
+
+static inline void il_free_pages(struct il_priv *il, unsigned long page)
+{
+ free_pages(page, il->hw_params.rx_page_order);
+ il->alloc_rxb_page--;
+}
#define IWLWIFI_VERSION "in-tree:"
#define DRV_COPYRIGHT "Copyright(c) 2003-2011 Intel Corporation"
#define IL_CMD(x) case x: return #x
+/* Size of one Rx buffer in host DRAM */
+#define IL_RX_BUF_SIZE_3K (3 * 1000) /* 3945 only */
+#define IL_RX_BUF_SIZE_4K (4 * 1024)
+#define IL_RX_BUF_SIZE_8K (8 * 1024)
+
struct il_hcmd_ops {
int (*rxon_assoc)(struct il_priv *il, struct il_rxon_context *ctx);
int (*commit_rxon)(struct il_priv *il, struct il_rxon_context *ctx);
irqreturn_t il_isr(int irq, void *data);
+
+#include <linux/io.h>
+
+static inline void _il_write8(struct il_priv *il, u32 ofs, u8 val)
+{
+ iowrite8(val, il->hw_base + ofs);
+}
+#define il_write8(il, ofs, val) _il_write8(il, ofs, val)
+
+static inline void _il_wr(struct il_priv *il, u32 ofs, u32 val)
+{
+ iowrite32(val, il->hw_base + ofs);
+}
+
+static inline u32 _il_rd(struct il_priv *il, u32 ofs)
+{
+ return ioread32(il->hw_base + ofs);
+}
+
+#define IL_POLL_INTERVAL 10 /* microseconds */
+static inline int
+_il_poll_bit(struct il_priv *il, u32 addr,
+ u32 bits, u32 mask, int timeout)
+{
+ int t = 0;
+
+ do {
+ if ((_il_rd(il, addr) & mask) == (bits & mask))
+ return t;
+ udelay(IL_POLL_INTERVAL);
+ t += IL_POLL_INTERVAL;
+ } while (t < timeout);
+
+ return -ETIMEDOUT;
+}
+
+static inline void _il_set_bit(struct il_priv *il, u32 reg, u32 mask)
+{
+ _il_wr(il, reg, _il_rd(il, reg) | mask);
+}
+
+static inline void il_set_bit(struct il_priv *p, u32 r, u32 m)
+{
+ unsigned long reg_flags;
+
+ spin_lock_irqsave(&p->reg_lock, reg_flags);
+ _il_set_bit(p, r, m);
+ spin_unlock_irqrestore(&p->reg_lock, reg_flags);
+}
+
+static inline void
+_il_clear_bit(struct il_priv *il, u32 reg, u32 mask)
+{
+ _il_wr(il, reg, _il_rd(il, reg) & ~mask);
+}
+
+static inline void il_clear_bit(struct il_priv *p, u32 r, u32 m)
+{
+ unsigned long reg_flags;
+
+ spin_lock_irqsave(&p->reg_lock, reg_flags);
+ _il_clear_bit(p, r, m);
+ spin_unlock_irqrestore(&p->reg_lock, reg_flags);
+}
+
+static inline int _il_grab_nic_access(struct il_priv *il)
+{
+ int ret;
+ u32 val;
+
+ /* this bit wakes up the NIC */
+ _il_set_bit(il, CSR_GP_CNTRL,
+ CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
+
+ /*
+ * These bits say the device is running, and should keep running for
+ * at least a short while (at least as long as MAC_ACCESS_REQ stays 1),
+ * but they do not indicate that embedded SRAM is restored yet;
+ * 3945 and 4965 have volatile SRAM, and must save/restore contents
+ * to/from host DRAM when sleeping/waking for power-saving.
+ * Each direction takes approximately 1/4 millisecond; with this
+ * overhead, it's a good idea to grab and hold MAC_ACCESS_REQUEST if a
+ * series of register accesses are expected (e.g. reading Event Log),
+ * to keep device from sleeping.
+ *
+ * CSR_UCODE_DRV_GP1 register bit MAC_SLEEP == 0 indicates that
+ * SRAM is okay/restored. We don't check that here because this call
+ * is just for hardware register access; but GP1 MAC_SLEEP check is a
+ * good idea before accessing 3945/4965 SRAM (e.g. reading Event Log).
+ *
+ */
+ ret = _il_poll_bit(il, CSR_GP_CNTRL,
+ CSR_GP_CNTRL_REG_VAL_MAC_ACCESS_EN,
+ (CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY |
+ CSR_GP_CNTRL_REG_FLAG_GOING_TO_SLEEP), 15000);
+ if (ret < 0) {
+ val = _il_rd(il, CSR_GP_CNTRL);
+ IL_ERR(
+ "MAC is in deep sleep!. CSR_GP_CNTRL = 0x%08X\n", val);
+ _il_wr(il, CSR_RESET,
+ CSR_RESET_REG_FLAG_FORCE_NMI);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static inline void _il_release_nic_access(struct il_priv *il)
+{
+ _il_clear_bit(il, CSR_GP_CNTRL,
+ CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
+}
+
+static inline u32 il_rd(struct il_priv *il, u32 reg)
+{
+ u32 value;
+ unsigned long reg_flags;
+
+ spin_lock_irqsave(&il->reg_lock, reg_flags);
+ _il_grab_nic_access(il);
+ value = _il_rd(il, reg);
+ _il_release_nic_access(il);
+ spin_unlock_irqrestore(&il->reg_lock, reg_flags);
+ return value;
+
+}
+
+static inline void
+il_wr(struct il_priv *il, u32 reg, u32 value)
+{
+ unsigned long reg_flags;
+
+ spin_lock_irqsave(&il->reg_lock, reg_flags);
+ if (!_il_grab_nic_access(il)) {
+ _il_wr(il, reg, value);
+ _il_release_nic_access(il);
+ }
+ spin_unlock_irqrestore(&il->reg_lock, reg_flags);
+}
+
+static inline void il_write_reg_buf(struct il_priv *il,
+ u32 reg, u32 len, u32 *values)
+{
+ u32 count = sizeof(u32);
+
+ if (il != NULL && values != NULL) {
+ for (; 0 < len; len -= count, reg += count, values++)
+ il_wr(il, reg, *values);
+ }
+}
+
+static inline int il_poll_bit(struct il_priv *il, u32 addr,
+ u32 mask, int timeout)
+{
+ int t = 0;
+
+ do {
+ if ((il_rd(il, addr) & mask) == mask)
+ return t;
+ udelay(IL_POLL_INTERVAL);
+ t += IL_POLL_INTERVAL;
+ } while (t < timeout);
+
+ return -ETIMEDOUT;
+}
+
+static inline u32 _il_rd_prph(struct il_priv *il, u32 reg)
+{
+ _il_wr(il, HBUS_TARG_PRPH_RADDR, reg | (3 << 24));
+ rmb();
+ return _il_rd(il, HBUS_TARG_PRPH_RDAT);
+}
+
+static inline u32 il_rd_prph(struct il_priv *il, u32 reg)
+{
+ unsigned long reg_flags;
+ u32 val;
+
+ spin_lock_irqsave(&il->reg_lock, reg_flags);
+ _il_grab_nic_access(il);
+ val = _il_rd_prph(il, reg);
+ _il_release_nic_access(il);
+ spin_unlock_irqrestore(&il->reg_lock, reg_flags);
+ return val;
+}
+
+static inline void _il_wr_prph(struct il_priv *il,
+ u32 addr, u32 val)
+{
+ _il_wr(il, HBUS_TARG_PRPH_WADDR,
+ ((addr & 0x0000FFFF) | (3 << 24)));
+ wmb();
+ _il_wr(il, HBUS_TARG_PRPH_WDAT, val);
+}
+
+static inline void
+il_wr_prph(struct il_priv *il, u32 addr, u32 val)
+{
+ unsigned long reg_flags;
+
+ spin_lock_irqsave(&il->reg_lock, reg_flags);
+ if (!_il_grab_nic_access(il)) {
+ _il_wr_prph(il, addr, val);
+ _il_release_nic_access(il);
+ }
+ spin_unlock_irqrestore(&il->reg_lock, reg_flags);
+}
+
+#define _il_set_bits_prph(il, reg, mask) \
+_il_wr_prph(il, reg, (_il_rd_prph(il, reg) | mask))
+
+static inline void
+il_set_bits_prph(struct il_priv *il, u32 reg, u32 mask)
+{
+ unsigned long reg_flags;
+
+ spin_lock_irqsave(&il->reg_lock, reg_flags);
+ _il_grab_nic_access(il);
+ _il_set_bits_prph(il, reg, mask);
+ _il_release_nic_access(il);
+ spin_unlock_irqrestore(&il->reg_lock, reg_flags);
+}
+
+#define _il_set_bits_mask_prph(il, reg, bits, mask) \
+_il_wr_prph(il, reg, \
+ ((_il_rd_prph(il, reg) & mask) | bits))
+
+static inline void il_set_bits_mask_prph(struct il_priv *il, u32 reg,
+ u32 bits, u32 mask)
+{
+ unsigned long reg_flags;
+
+ spin_lock_irqsave(&il->reg_lock, reg_flags);
+ _il_grab_nic_access(il);
+ _il_set_bits_mask_prph(il, reg, bits, mask);
+ _il_release_nic_access(il);
+ spin_unlock_irqrestore(&il->reg_lock, reg_flags);
+}
+
+static inline void il_clear_bits_prph(struct il_priv
+ *il, u32 reg, u32 mask)
+{
+ unsigned long reg_flags;
+ u32 val;
+
+ spin_lock_irqsave(&il->reg_lock, reg_flags);
+ _il_grab_nic_access(il);
+ val = _il_rd_prph(il, reg);
+ _il_wr_prph(il, reg, (val & ~mask));
+ _il_release_nic_access(il);
+ spin_unlock_irqrestore(&il->reg_lock, reg_flags);
+}
+
+static inline u32 il_read_targ_mem(struct il_priv *il, u32 addr)
+{
+ unsigned long reg_flags;
+ u32 value;
+
+ spin_lock_irqsave(&il->reg_lock, reg_flags);
+ _il_grab_nic_access(il);
+
+ _il_wr(il, HBUS_TARG_MEM_RADDR, addr);
+ rmb();
+ value = _il_rd(il, HBUS_TARG_MEM_RDAT);
+
+ _il_release_nic_access(il);
+ spin_unlock_irqrestore(&il->reg_lock, reg_flags);
+ return value;
+}
+
+static inline void
+il_write_targ_mem(struct il_priv *il, u32 addr, u32 val)
+{
+ unsigned long reg_flags;
+
+ spin_lock_irqsave(&il->reg_lock, reg_flags);
+ if (!_il_grab_nic_access(il)) {
+ _il_wr(il, HBUS_TARG_MEM_WADDR, addr);
+ wmb();
+ _il_wr(il, HBUS_TARG_MEM_WDAT, val);
+ _il_release_nic_access(il);
+ }
+ spin_unlock_irqrestore(&il->reg_lock, reg_flags);
+}
+
+static inline void
+il_write_targ_mem_buf(struct il_priv *il, u32 addr,
+ u32 len, u32 *values)
+{
+ unsigned long reg_flags;
+
+ spin_lock_irqsave(&il->reg_lock, reg_flags);
+ if (!_il_grab_nic_access(il)) {
+ _il_wr(il, HBUS_TARG_MEM_WADDR, addr);
+ wmb();
+ for (; 0 < len; len -= sizeof(u32), values++)
+ _il_wr(il,
+ HBUS_TARG_MEM_WDAT, *values);
+
+ _il_release_nic_access(il);
+ }
+ spin_unlock_irqrestore(&il->reg_lock, reg_flags);
+}
+
+#define HW_KEY_DYNAMIC 0
+#define HW_KEY_DEFAULT 1
+
+#define IL_STA_DRIVER_ACTIVE BIT(0) /* driver entry is active */
+#define IL_STA_UCODE_ACTIVE BIT(1) /* ucode entry is active */
+#define IL_STA_UCODE_INPROGRESS BIT(2) /* ucode entry is in process of
+ being activated */
+#define IL_STA_LOCAL BIT(3) /* station state not directed by mac80211;
+ (this is for the IBSS BSSID stations) */
+#define IL_STA_BCAST BIT(4) /* this station is the special bcast station */
+
+
+void il_restore_stations(struct il_priv *il,
+ struct il_rxon_context *ctx);
+void il_clear_ucode_stations(struct il_priv *il,
+ struct il_rxon_context *ctx);
+void il_dealloc_bcast_stations(struct il_priv *il);
+int il_get_free_ucode_key_idx(struct il_priv *il);
+int il_send_add_sta(struct il_priv *il,
+ struct il_addsta_cmd *sta, u8 flags);
+int il_add_station_common(struct il_priv *il,
+ struct il_rxon_context *ctx,
+ const u8 *addr, bool is_ap,
+ struct ieee80211_sta *sta, u8 *sta_id_r);
+int il_remove_station(struct il_priv *il,
+ const u8 sta_id,
+ const u8 *addr);
+int il_mac_sta_remove(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta);
+
+u8 il_prep_station(struct il_priv *il,
+ struct il_rxon_context *ctx,
+ const u8 *addr, bool is_ap,
+ struct ieee80211_sta *sta);
+
+int il_send_lq_cmd(struct il_priv *il,
+ struct il_rxon_context *ctx,
+ struct il_link_quality_cmd *lq,
+ u8 flags, bool init);
+
+/**
+ * il_clear_driver_stations - clear knowledge of all stations from driver
+ * @il: iwl il struct
+ *
+ * This is called during il_down() to make sure that in the case
+ * we're coming there from a hardware restart mac80211 will be
+ * able to reconfigure stations -- if we're getting there in the
+ * normal down flow then the stations will already be cleared.
+ */
+static inline void il_clear_driver_stations(struct il_priv *il)
+{
+ unsigned long flags;
+ struct il_rxon_context *ctx = &il->ctx;
+
+ spin_lock_irqsave(&il->sta_lock, flags);
+ memset(il->stations, 0, sizeof(il->stations));
+ il->num_stations = 0;
+
+ il->ucode_key_table = 0;
+
+ /*
+ * Remove all key information that is not stored as part
+ * of station information since mac80211 may not have had
+ * a chance to remove all the keys. When device is
+ * reconfigured by mac80211 after an error all keys will
+ * be reconfigured.
+ */
+ memset(ctx->wep_keys, 0, sizeof(ctx->wep_keys));
+ ctx->key_mapping_keys = 0;
+
+ spin_unlock_irqrestore(&il->sta_lock, flags);
+}
+
+static inline int il_sta_id(struct ieee80211_sta *sta)
+{
+ if (WARN_ON(!sta))
+ return IL_INVALID_STATION;
+
+ return ((struct il_station_priv_common *)sta->drv_priv)->sta_id;
+}
+
+/**
+ * il_sta_id_or_broadcast - return sta_id or broadcast sta
+ * @il: iwl il
+ * @context: the current context
+ * @sta: mac80211 station
+ *
+ * In certain circumstances mac80211 passes a station pointer
+ * that may be %NULL, for example during TX or key setup. In
+ * that case, we need to use the broadcast station, so this
+ * inline wraps that pattern.
+ */
+static inline int il_sta_id_or_broadcast(struct il_priv *il,
+ struct il_rxon_context *context,
+ struct ieee80211_sta *sta)
+{
+ int sta_id;
+
+ if (!sta)
+ return context->bcast_sta_id;
+
+ sta_id = il_sta_id(sta);
+
+ /*
+ * mac80211 should not be passing a partially
+ * initialised station!
+ */
+ WARN_ON(sta_id == IL_INVALID_STATION);
+
+ return sta_id;
+}
+
+/**
+ * il_queue_inc_wrap - increment queue idx, wrap back to beginning
+ * @idx -- current idx
+ * @n_bd -- total number of entries in queue (must be power of 2)
+ */
+static inline int il_queue_inc_wrap(int idx, int n_bd)
+{
+ return ++idx & (n_bd - 1);
+}
+
+/**
+ * il_queue_dec_wrap - decrement queue idx, wrap back to end
+ * @idx -- current idx
+ * @n_bd -- total number of entries in queue (must be power of 2)
+ */
+static inline int il_queue_dec_wrap(int idx, int n_bd)
+{
+ return --idx & (n_bd - 1);
+}
+
+/* TODO: Move fw_desc functions to iwl-pci.ko */
+static inline void il_free_fw_desc(struct pci_dev *pci_dev,
+ struct fw_desc *desc)
+{
+ if (desc->v_addr)
+ dma_free_coherent(&pci_dev->dev, desc->len,
+ desc->v_addr, desc->p_addr);
+ desc->v_addr = NULL;
+ desc->len = 0;
+}
+
+static inline int il_alloc_fw_desc(struct pci_dev *pci_dev,
+ struct fw_desc *desc)
+{
+ if (!desc->len) {
+ desc->v_addr = NULL;
+ return -EINVAL;
+ }
+
+ desc->v_addr = dma_alloc_coherent(&pci_dev->dev, desc->len,
+ &desc->p_addr, GFP_KERNEL);
+ return (desc->v_addr != NULL) ? 0 : -ENOMEM;
+}
+
+/*
+ * we have 8 bits used like this:
+ *
+ * 7 6 5 4 3 2 1 0
+ * | | | | | | | |
+ * | | | | | | +-+-------- AC queue (0-3)
+ * | | | | | |
+ * | +-+-+-+-+------------ HW queue ID
+ * |
+ * +---------------------- unused
+ */
+static inline void
+il_set_swq_id(struct il_tx_queue *txq, u8 ac, u8 hwq)
+{
+ BUG_ON(ac > 3); /* only have 2 bits */
+ BUG_ON(hwq > 31); /* only use 5 bits */
+
+ txq->swq_id = (hwq << 2) | ac;
+}
+
+static inline void il_wake_queue(struct il_priv *il,
+ struct il_tx_queue *txq)
+{
+ u8 queue = txq->swq_id;
+ u8 ac = queue & 3;
+ u8 hwq = (queue >> 2) & 0x1f;
+
+ if (test_and_clear_bit(hwq, il->queue_stopped))
+ if (atomic_dec_return(&il->queue_stop_count[ac]) <= 0)
+ ieee80211_wake_queue(il->hw, ac);
+}
+
+static inline void il_stop_queue(struct il_priv *il,
+ struct il_tx_queue *txq)
+{
+ u8 queue = txq->swq_id;
+ u8 ac = queue & 3;
+ u8 hwq = (queue >> 2) & 0x1f;
+
+ if (!test_and_set_bit(hwq, il->queue_stopped))
+ if (atomic_inc_return(&il->queue_stop_count[ac]) > 0)
+ ieee80211_stop_queue(il->hw, ac);
+}
+
+#ifdef ieee80211_stop_queue
+#undef ieee80211_stop_queue
+#endif
+
+#define ieee80211_stop_queue DO_NOT_USE_ieee80211_stop_queue
+
+#ifdef ieee80211_wake_queue
+#undef ieee80211_wake_queue
+#endif
+
+#define ieee80211_wake_queue DO_NOT_USE_ieee80211_wake_queue
+
+static inline void il_disable_interrupts(struct il_priv *il)
+{
+ clear_bit(S_INT_ENABLED, &il->status);
+
+ /* disable interrupts from uCode/NIC to host */
+ _il_wr(il, CSR_INT_MASK, 0x00000000);
+
+ /* acknowledge/clear/reset any interrupts still pending
+ * from uCode or flow handler (Rx/Tx DMA) */
+ _il_wr(il, CSR_INT, 0xffffffff);
+ _il_wr(il, CSR_FH_INT_STATUS, 0xffffffff);
+ D_ISR("Disabled interrupts\n");
+}
+
+static inline void il_enable_rfkill_int(struct il_priv *il)
+{
+ D_ISR("Enabling rfkill interrupt\n");
+ _il_wr(il, CSR_INT_MASK, CSR_INT_BIT_RF_KILL);
+}
+
+static inline void il_enable_interrupts(struct il_priv *il)
+{
+ D_ISR("Enabling interrupts\n");
+ set_bit(S_INT_ENABLED, &il->status);
+ _il_wr(il, CSR_INT_MASK, il->inta_mask);
+}
+
+/**
+ * il_beacon_time_mask_low - mask of lower 32 bit of beacon time
+ * @il -- pointer to il_priv data structure
+ * @tsf_bits -- number of bits need to shift for masking)
+ */
+static inline u32 il_beacon_time_mask_low(struct il_priv *il,
+ u16 tsf_bits)
+{
+ return (1 << tsf_bits) - 1;
+}
+
+/**
+ * il_beacon_time_mask_high - mask of higher 32 bit of beacon time
+ * @il -- pointer to il_priv data structure
+ * @tsf_bits -- number of bits need to shift for masking)
+ */
+static inline u32 il_beacon_time_mask_high(struct il_priv *il,
+ u16 tsf_bits)
+{
+ return ((1 << (32 - tsf_bits)) - 1) << tsf_bits;
+}
+
+/**
+ * struct il_rb_status - reseve buffer status host memory mapped FH registers
+ *
+ * @closed_rb_num [0:11] - Indicates the idx of the RB which was closed
+ * @closed_fr_num [0:11] - Indicates the idx of the RX Frame which was closed
+ * @finished_rb_num [0:11] - Indicates the idx of the current RB
+ * in which the last frame was written to
+ * @finished_fr_num [0:11] - Indicates the idx of the RX Frame
+ * which was transferred
+ */
+struct il_rb_status {
+ __le16 closed_rb_num;
+ __le16 closed_fr_num;
+ __le16 finished_rb_num;
+ __le16 finished_fr_nam;
+ __le32 __unused; /* 3945 only */
+} __packed;
+
+
+#define TFD_QUEUE_SIZE_MAX (256)
+#define TFD_QUEUE_SIZE_BC_DUP (64)
+#define TFD_QUEUE_BC_SIZE (TFD_QUEUE_SIZE_MAX + TFD_QUEUE_SIZE_BC_DUP)
+#define IL_TX_DMA_MASK DMA_BIT_MASK(36)
+#define IL_NUM_OF_TBS 20
+
+static inline u8 il_get_dma_hi_addr(dma_addr_t addr)
+{
+ return (sizeof(addr) > sizeof(u32) ? (addr >> 16) >> 16 : 0) & 0xF;
+}
+/**
+ * struct il_tfd_tb transmit buffer descriptor within transmit frame descriptor
+ *
+ * This structure contains dma address and length of transmission address
+ *
+ * @lo: low [31:0] portion of the dma address of TX buffer
+ * every even is unaligned on 16 bit boundary
+ * @hi_n_len 0-3 [35:32] portion of dma
+ * 4-15 length of the tx buffer
+ */
+struct il_tfd_tb {
+ __le32 lo;
+ __le16 hi_n_len;
+} __packed;
+
+/**
+ * struct il_tfd
+ *
+ * Transmit Frame Descriptor (TFD)
+ *
+ * @ __reserved1[3] reserved
+ * @ num_tbs 0-4 number of active tbs
+ * 5 reserved
+ * 6-7 padding (not used)
+ * @ tbs[20] transmit frame buffer descriptors
+ * @ __pad padding
+ *
+ * Each Tx queue uses a circular buffer of 256 TFDs stored in host DRAM.
+ * Both driver and device share these circular buffers, each of which must be
+ * contiguous 256 TFDs x 128 bytes-per-TFD = 32 KBytes
+ *
+ * Driver must indicate the physical address of the base of each
+ * circular buffer via the FH_MEM_CBBC_QUEUE registers.
+ *
+ * Each TFD contains pointer/size information for up to 20 data buffers
+ * in host DRAM. These buffers collectively contain the (one) frame described
+ * by the TFD. Each buffer must be a single contiguous block of memory within
+ * itself, but buffers may be scattered in host DRAM. Each buffer has max size
+ * of (4K - 4). The concatenates all of a TFD's buffers into a single
+ * Tx frame, up to 8 KBytes in size.
+ *
+ * A maximum of 255 (not 256!) TFDs may be on a queue waiting for Tx.
+ */
+struct il_tfd {
+ u8 __reserved1[3];
+ u8 num_tbs;
+ struct il_tfd_tb tbs[IL_NUM_OF_TBS];
+ __le32 __pad;
+} __packed;
+/* PCI registers */
+#define PCI_CFG_RETRY_TIMEOUT 0x041
+
+/* PCI register values */
+#define PCI_CFG_LINK_CTRL_VAL_L0S_EN 0x01
+#define PCI_CFG_LINK_CTRL_VAL_L1_EN 0x02
+
#endif /* __il_core_h__ */
+++ /dev/null
-/******************************************************************************
- *
- * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- *****************************************************************************/
-/*
- * Please use this file (iwl-dev.h) for driver implementation definitions.
- * Please use commands.h for uCode API definitions.
- * Please use 4965.h for hardware-related definitions.
- */
-
-#ifndef __il_dev_h__
-#define __il_dev_h__
-
-#include <linux/interrupt.h>
-#include <linux/pci.h> /* for struct pci_device_id */
-#include <linux/kernel.h>
-#include <linux/leds.h>
-#include <linux/wait.h>
-#include <net/ieee80211_radiotap.h>
-
-#include "iwl-eeprom.h"
-#include "csr.h"
-#include "iwl-prph.h"
-#include "iwl-debug.h"
-#include "4965.h"
-#include "iwl-led.h"
-#include "iwl-power.h"
-#include "iwl-legacy-rs.h"
-
-#define U32_PAD(n) ((4-(n))&0x3)
-
-struct il_tx_queue;
-
-/* CT-KILL constants */
-#define CT_KILL_THRESHOLD_LEGACY 110 /* in Celsius */
-
-/* Default noise level to report when noise measurement is not available.
- * This may be because we're:
- * 1) Not associated (4965, no beacon stats being sent to driver)
- * 2) Scanning (noise measurement does not apply to associated channel)
- * 3) Receiving CCK (3945 delivers noise info only for OFDM frames)
- * Use default noise value of -127 ... this is below the range of measurable
- * Rx dBm for either 3945 or 4965, so it can indicate "unmeasurable" to user.
- * Also, -127 works better than 0 when averaging frames with/without
- * noise info (e.g. averaging might be done in app); measured dBm values are
- * always negative ... using a negative value as the default keeps all
- * averages within an s8's (used in some apps) range of negative values. */
-#define IL_NOISE_MEAS_NOT_AVAILABLE (-127)
-
-/*
- * RTS threshold here is total size [2347] minus 4 FCS bytes
- * Per spec:
- * a value of 0 means RTS on all data/management packets
- * a value > max MSDU size means no RTS
- * else RTS for data/management frames where MPDU is larger
- * than RTS value.
- */
-#define DEFAULT_RTS_THRESHOLD 2347U
-#define MIN_RTS_THRESHOLD 0U
-#define MAX_RTS_THRESHOLD 2347U
-#define MAX_MSDU_SIZE 2304U
-#define MAX_MPDU_SIZE 2346U
-#define DEFAULT_BEACON_INTERVAL 100U
-#define DEFAULT_SHORT_RETRY_LIMIT 7U
-#define DEFAULT_LONG_RETRY_LIMIT 4U
-
-struct il_rx_buf {
- dma_addr_t page_dma;
- struct page *page;
- struct list_head list;
-};
-
-#define rxb_addr(r) page_address(r->page)
-
-/* defined below */
-struct il_device_cmd;
-
-struct il_cmd_meta {
- /* only for SYNC commands, iff the reply skb is wanted */
- struct il_host_cmd *source;
- /*
- * only for ASYNC commands
- * (which is somewhat stupid -- look at iwl-sta.c for instance
- * which duplicates a bunch of code because the callback isn't
- * invoked for SYNC commands, if it were and its result passed
- * through it would be simpler...)
- */
- void (*callback)(struct il_priv *il,
- struct il_device_cmd *cmd,
- struct il_rx_pkt *pkt);
-
- /* The CMD_SIZE_HUGE flag bit indicates that the command
- * structure is stored at the end of the shared queue memory. */
- u32 flags;
-
- DEFINE_DMA_UNMAP_ADDR(mapping);
- DEFINE_DMA_UNMAP_LEN(len);
-};
-
-/*
- * Generic queue structure
- *
- * Contains common data for Rx and Tx queues
- */
-struct il_queue {
- int n_bd; /* number of BDs in this queue */
- int write_ptr; /* 1-st empty entry (idx) host_w*/
- int read_ptr; /* last used entry (idx) host_r*/
- /* use for monitoring and recovering the stuck queue */
- dma_addr_t dma_addr; /* physical addr for BD's */
- int n_win; /* safe queue win */
- u32 id;
- int low_mark; /* low watermark, resume queue if free
- * space more than this */
- int high_mark; /* high watermark, stop queue if free
- * space less than this */
-};
-
-/* One for each TFD */
-struct il_tx_info {
- struct sk_buff *skb;
- struct il_rxon_context *ctx;
-};
-
-/**
- * struct il_tx_queue - Tx Queue for DMA
- * @q: generic Rx/Tx queue descriptor
- * @bd: base of circular buffer of TFDs
- * @cmd: array of command/TX buffer pointers
- * @meta: array of meta data for each command/tx buffer
- * @dma_addr_cmd: physical address of cmd/tx buffer array
- * @txb: array of per-TFD driver data
- * @time_stamp: time (in jiffies) of last read_ptr change
- * @need_update: indicates need to update read/write idx
- * @sched_retry: indicates queue is high-throughput aggregation (HT AGG) enabled
- *
- * A Tx queue consists of circular buffer of BDs (a.k.a. TFDs, transmit frame
- * descriptors) and required locking structures.
- */
-#define TFD_TX_CMD_SLOTS 256
-#define TFD_CMD_SLOTS 32
-
-struct il_tx_queue {
- struct il_queue q;
- void *tfds;
- struct il_device_cmd **cmd;
- struct il_cmd_meta *meta;
- struct il_tx_info *txb;
- unsigned long time_stamp;
- u8 need_update;
- u8 sched_retry;
- u8 active;
- u8 swq_id;
-};
-
-#define IL_NUM_SCAN_RATES (2)
-
-struct il4965_channel_tgd_info {
- u8 type;
- s8 max_power;
-};
-
-struct il4965_channel_tgh_info {
- s64 last_radar_time;
-};
-
-#define IL4965_MAX_RATE (33)
-
-struct il3945_clip_group {
- /* maximum power level to prevent clipping for each rate, derived by
- * us from this band's saturation power in EEPROM */
- const s8 clip_powers[IL_MAX_RATES];
-};
-
-/* current Tx power values to use, one for each rate for each channel.
- * requested power is limited by:
- * -- regulatory EEPROM limits for this channel
- * -- hardware capabilities (clip-powers)
- * -- spectrum management
- * -- user preference (e.g. iwconfig)
- * when requested power is set, base power idx must also be set. */
-struct il3945_channel_power_info {
- struct il3945_tx_power tpc; /* actual radio and DSP gain settings */
- s8 power_table_idx; /* actual (compenst'd) idx into gain table */
- s8 base_power_idx; /* gain idx for power at factory temp. */
- s8 requested_power; /* power (dBm) requested for this chnl/rate */
-};
-
-/* current scan Tx power values to use, one for each scan rate for each
- * channel. */
-struct il3945_scan_power_info {
- struct il3945_tx_power tpc; /* actual radio and DSP gain settings */
- s8 power_table_idx; /* actual (compenst'd) idx into gain table */
- s8 requested_power; /* scan pwr (dBm) requested for chnl/rate */
-};
-
-/*
- * One for each channel, holds all channel setup data
- * Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant
- * with one another!
- */
-struct il_channel_info {
- struct il4965_channel_tgd_info tgd;
- struct il4965_channel_tgh_info tgh;
- struct il_eeprom_channel eeprom; /* EEPROM regulatory limit */
- struct il_eeprom_channel ht40_eeprom; /* EEPROM regulatory limit for
- * HT40 channel */
-
- u8 channel; /* channel number */
- u8 flags; /* flags copied from EEPROM */
- s8 max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */
- s8 curr_txpow; /* (dBm) regulatory/spectrum/user (not h/w) limit */
- s8 min_power; /* always 0 */
- s8 scan_power; /* (dBm) regul. eeprom, direct scans, any rate */
-
- u8 group_idx; /* 0-4, maps channel to group1/2/3/4/5 */
- u8 band_idx; /* 0-4, maps channel to band1/2/3/4/5 */
- enum ieee80211_band band;
-
- /* HT40 channel info */
- s8 ht40_max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */
- u8 ht40_flags; /* flags copied from EEPROM */
- u8 ht40_extension_channel; /* HT_IE_EXT_CHANNEL_* */
-
- /* Radio/DSP gain settings for each "normal" data Tx rate.
- * These include, in addition to RF and DSP gain, a few fields for
- * remembering/modifying gain settings (idxes). */
- struct il3945_channel_power_info power_info[IL4965_MAX_RATE];
-
- /* Radio/DSP gain settings for each scan rate, for directed scans. */
- struct il3945_scan_power_info scan_pwr_info[IL_NUM_SCAN_RATES];
-};
-
-#define IL_TX_FIFO_BK 0 /* shared */
-#define IL_TX_FIFO_BE 1
-#define IL_TX_FIFO_VI 2 /* shared */
-#define IL_TX_FIFO_VO 3
-#define IL_TX_FIFO_UNUSED -1
-
-/* Minimum number of queues. MAX_NUM is defined in hw specific files.
- * Set the minimum to accommodate the 4 standard TX queues, 1 command
- * queue, 2 (unused) HCCA queues, and 4 HT queues (one for each AC) */
-#define IL_MIN_NUM_QUEUES 10
-
-#define IL_DEFAULT_CMD_QUEUE_NUM 4
-
-#define IEEE80211_DATA_LEN 2304
-#define IEEE80211_4ADDR_LEN 30
-#define IEEE80211_HLEN (IEEE80211_4ADDR_LEN)
-#define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN)
-
-struct il_frame {
- union {
- struct ieee80211_hdr frame;
- struct il_tx_beacon_cmd beacon;
- u8 raw[IEEE80211_FRAME_LEN];
- u8 cmd[360];
- } u;
- struct list_head list;
-};
-
-#define SEQ_TO_SN(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4)
-#define SN_TO_SEQ(ssn) (((ssn) << 4) & IEEE80211_SCTL_SEQ)
-#define MAX_SN ((IEEE80211_SCTL_SEQ) >> 4)
-
-enum {
- CMD_SYNC = 0,
- CMD_SIZE_NORMAL = 0,
- CMD_NO_SKB = 0,
- CMD_SIZE_HUGE = (1 << 0),
- CMD_ASYNC = (1 << 1),
- CMD_WANT_SKB = (1 << 2),
- CMD_MAPPED = (1 << 3),
-};
-
-#define DEF_CMD_PAYLOAD_SIZE 320
-
-/**
- * struct il_device_cmd
- *
- * For allocation of the command and tx queues, this establishes the overall
- * size of the largest command we send to uCode, except for a scan command
- * (which is relatively huge; space is allocated separately).
- */
-struct il_device_cmd {
- struct il_cmd_header hdr; /* uCode API */
- union {
- u32 flags;
- u8 val8;
- u16 val16;
- u32 val32;
- struct il_tx_cmd tx;
- u8 payload[DEF_CMD_PAYLOAD_SIZE];
- } __packed cmd;
-} __packed;
-
-#define TFD_MAX_PAYLOAD_SIZE (sizeof(struct il_device_cmd))
-
-
-struct il_host_cmd {
- const void *data;
- unsigned long reply_page;
- void (*callback)(struct il_priv *il,
- struct il_device_cmd *cmd,
- struct il_rx_pkt *pkt);
- u32 flags;
- u16 len;
- u8 id;
-};
-
-#define SUP_RATE_11A_MAX_NUM_CHANNELS 8
-#define SUP_RATE_11B_MAX_NUM_CHANNELS 4
-#define SUP_RATE_11G_MAX_NUM_CHANNELS 12
-
-/**
- * struct il_rx_queue - Rx queue
- * @bd: driver's pointer to buffer of receive buffer descriptors (rbd)
- * @bd_dma: bus address of buffer of receive buffer descriptors (rbd)
- * @read: Shared idx to newest available Rx buffer
- * @write: Shared idx to oldest written Rx packet
- * @free_count: Number of pre-allocated buffers in rx_free
- * @rx_free: list of free SKBs for use
- * @rx_used: List of Rx buffers with no SKB
- * @need_update: flag to indicate we need to update read/write idx
- * @rb_stts: driver's pointer to receive buffer status
- * @rb_stts_dma: bus address of receive buffer status
- *
- * NOTE: rx_free and rx_used are used as a FIFO for il_rx_bufs
- */
-struct il_rx_queue {
- __le32 *bd;
- dma_addr_t bd_dma;
- struct il_rx_buf pool[RX_QUEUE_SIZE + RX_FREE_BUFFERS];
- struct il_rx_buf *queue[RX_QUEUE_SIZE];
- u32 read;
- u32 write;
- u32 free_count;
- u32 write_actual;
- struct list_head rx_free;
- struct list_head rx_used;
- int need_update;
- struct il_rb_status *rb_stts;
- dma_addr_t rb_stts_dma;
- spinlock_t lock;
-};
-
-#define IL_SUPPORTED_RATES_IE_LEN 8
-
-#define MAX_TID_COUNT 9
-
-#define IL_INVALID_RATE 0xFF
-#define IL_INVALID_VALUE -1
-
-/**
- * struct il_ht_agg -- aggregation status while waiting for block-ack
- * @txq_id: Tx queue used for Tx attempt
- * @frame_count: # frames attempted by Tx command
- * @wait_for_ba: Expect block-ack before next Tx reply
- * @start_idx: Index of 1st Transmit Frame Descriptor (TFD) in Tx win
- * @bitmap0: Low order bitmap, one bit for each frame pending ACK in Tx win
- * @bitmap1: High order, one bit for each frame pending ACK in Tx win
- * @rate_n_flags: Rate at which Tx was attempted
- *
- * If C_TX indicates that aggregation was attempted, driver must wait
- * for block ack (N_COMPRESSED_BA). This struct stores tx reply info
- * until block ack arrives.
- */
-struct il_ht_agg {
- u16 txq_id;
- u16 frame_count;
- u16 wait_for_ba;
- u16 start_idx;
- u64 bitmap;
- u32 rate_n_flags;
-#define IL_AGG_OFF 0
-#define IL_AGG_ON 1
-#define IL_EMPTYING_HW_QUEUE_ADDBA 2
-#define IL_EMPTYING_HW_QUEUE_DELBA 3
- u8 state;
-};
-
-
-struct il_tid_data {
- u16 seq_number; /* 4965 only */
- u16 tfds_in_queue;
- struct il_ht_agg agg;
-};
-
-struct il_hw_key {
- u32 cipher;
- int keylen;
- u8 keyidx;
- u8 key[32];
-};
-
-union il_ht_rate_supp {
- u16 rates;
- struct {
- u8 siso_rate;
- u8 mimo_rate;
- };
-};
-
-#define CFG_HT_RX_AMPDU_FACTOR_8K (0x0)
-#define CFG_HT_RX_AMPDU_FACTOR_16K (0x1)
-#define CFG_HT_RX_AMPDU_FACTOR_32K (0x2)
-#define CFG_HT_RX_AMPDU_FACTOR_64K (0x3)
-#define CFG_HT_RX_AMPDU_FACTOR_DEF CFG_HT_RX_AMPDU_FACTOR_64K
-#define CFG_HT_RX_AMPDU_FACTOR_MAX CFG_HT_RX_AMPDU_FACTOR_64K
-#define CFG_HT_RX_AMPDU_FACTOR_MIN CFG_HT_RX_AMPDU_FACTOR_8K
-
-/*
- * Maximal MPDU density for TX aggregation
- * 4 - 2us density
- * 5 - 4us density
- * 6 - 8us density
- * 7 - 16us density
- */
-#define CFG_HT_MPDU_DENSITY_2USEC (0x4)
-#define CFG_HT_MPDU_DENSITY_4USEC (0x5)
-#define CFG_HT_MPDU_DENSITY_8USEC (0x6)
-#define CFG_HT_MPDU_DENSITY_16USEC (0x7)
-#define CFG_HT_MPDU_DENSITY_DEF CFG_HT_MPDU_DENSITY_4USEC
-#define CFG_HT_MPDU_DENSITY_MAX CFG_HT_MPDU_DENSITY_16USEC
-#define CFG_HT_MPDU_DENSITY_MIN (0x1)
-
-struct il_ht_config {
- bool single_chain_sufficient;
- enum ieee80211_smps_mode smps; /* current smps mode */
-};
-
-/* QoS structures */
-struct il_qos_info {
- int qos_active;
- struct il_qosparam_cmd def_qos_parm;
-};
-
-/*
- * Structure should be accessed with sta_lock held. When station addition
- * is in progress (IL_STA_UCODE_INPROGRESS) it is possible to access only
- * the commands (il_addsta_cmd and il_link_quality_cmd) without
- * sta_lock held.
- */
-struct il_station_entry {
- struct il_addsta_cmd sta;
- struct il_tid_data tid[MAX_TID_COUNT];
- u8 used, ctxid;
- struct il_hw_key keyinfo;
- struct il_link_quality_cmd *lq;
-};
-
-struct il_station_priv_common {
- struct il_rxon_context *ctx;
- u8 sta_id;
-};
-
-/*
- * il_station_priv: Driver's ilate station information
- *
- * When mac80211 creates a station it reserves some space (hw->sta_data_size)
- * in the structure for use by driver. This structure is places in that
- * space.
- *
- * The common struct MUST be first because it is shared between
- * 3945 and 4965!
- */
-struct il_station_priv {
- struct il_station_priv_common common;
- struct il_lq_sta lq_sta;
- atomic_t pending_frames;
- bool client;
- bool asleep;
-};
-
-/**
- * struct il_vif_priv - driver's ilate per-interface information
- *
- * When mac80211 allocates a virtual interface, it can allocate
- * space for us to put data into.
- */
-struct il_vif_priv {
- struct il_rxon_context *ctx;
- u8 ibss_bssid_sta_id;
-};
-
-/* one for each uCode image (inst/data, boot/init/runtime) */
-struct fw_desc {
- void *v_addr; /* access by driver */
- dma_addr_t p_addr; /* access by card's busmaster DMA */
- u32 len; /* bytes */
-};
-
-/* uCode file layout */
-struct il_ucode_header {
- __le32 ver; /* major/minor/API/serial */
- struct {
- __le32 inst_size; /* bytes of runtime code */
- __le32 data_size; /* bytes of runtime data */
- __le32 init_size; /* bytes of init code */
- __le32 init_data_size; /* bytes of init data */
- __le32 boot_size; /* bytes of bootstrap code */
- u8 data[0]; /* in same order as sizes */
- } v1;
-};
-
-struct il4965_ibss_seq {
- u8 mac[ETH_ALEN];
- u16 seq_num;
- u16 frag_num;
- unsigned long packet_time;
- struct list_head list;
-};
-
-struct il_sensitivity_ranges {
- u16 min_nrg_cck;
- u16 max_nrg_cck;
-
- u16 nrg_th_cck;
- u16 nrg_th_ofdm;
-
- u16 auto_corr_min_ofdm;
- u16 auto_corr_min_ofdm_mrc;
- u16 auto_corr_min_ofdm_x1;
- u16 auto_corr_min_ofdm_mrc_x1;
-
- u16 auto_corr_max_ofdm;
- u16 auto_corr_max_ofdm_mrc;
- u16 auto_corr_max_ofdm_x1;
- u16 auto_corr_max_ofdm_mrc_x1;
-
- u16 auto_corr_max_cck;
- u16 auto_corr_max_cck_mrc;
- u16 auto_corr_min_cck;
- u16 auto_corr_min_cck_mrc;
-
- u16 barker_corr_th_min;
- u16 barker_corr_th_min_mrc;
- u16 nrg_th_cca;
-};
-
-
-#define KELVIN_TO_CELSIUS(x) ((x)-273)
-#define CELSIUS_TO_KELVIN(x) ((x)+273)
-
-
-/**
- * struct il_hw_params
- * @max_txq_num: Max # Tx queues supported
- * @dma_chnl_num: Number of Tx DMA/FIFO channels
- * @scd_bc_tbls_size: size of scheduler byte count tables
- * @tfd_size: TFD size
- * @tx/rx_chains_num: Number of TX/RX chains
- * @valid_tx/rx_ant: usable antennas
- * @max_rxq_size: Max # Rx frames in Rx queue (must be power-of-2)
- * @max_rxq_log: Log-base-2 of max_rxq_size
- * @rx_page_order: Rx buffer page order
- * @rx_wrt_ptr_reg: FH{39}_RSCSR_CHNL0_WPTR
- * @max_stations:
- * @ht40_channel: is 40MHz width possible in band 2.4
- * BIT(IEEE80211_BAND_5GHZ) BIT(IEEE80211_BAND_5GHZ)
- * @sw_crypto: 0 for hw, 1 for sw
- * @max_xxx_size: for ucode uses
- * @ct_kill_threshold: temperature threshold
- * @beacon_time_tsf_bits: number of valid tsf bits for beacon time
- * @struct il_sensitivity_ranges: range of sensitivity values
- */
-struct il_hw_params {
- u8 max_txq_num;
- u8 dma_chnl_num;
- u16 scd_bc_tbls_size;
- u32 tfd_size;
- u8 tx_chains_num;
- u8 rx_chains_num;
- u8 valid_tx_ant;
- u8 valid_rx_ant;
- u16 max_rxq_size;
- u16 max_rxq_log;
- u32 rx_page_order;
- u32 rx_wrt_ptr_reg;
- u8 max_stations;
- u8 ht40_channel;
- u8 max_beacon_itrvl; /* in 1024 ms */
- u32 max_inst_size;
- u32 max_data_size;
- u32 max_bsm_size;
- u32 ct_kill_threshold; /* value in hw-dependent units */
- u16 beacon_time_tsf_bits;
- const struct il_sensitivity_ranges *sens;
-};
-
-
-/******************************************************************************
- *
- * Functions implemented in core module which are forward declared here
- * for use by iwl-[4-5].c
- *
- * NOTE: The implementation of these functions are not hardware specific
- * which is why they are in the core module files.
- *
- * Naming convention --
- * il_ <-- Is part of iwlwifi
- * iwlXXXX_ <-- Hardware specific (implemented in iwl-XXXX.c for XXXX)
- * il4965_bg_ <-- Called from work queue context
- * il4965_mac_ <-- mac80211 callback
- *
- ****************************************************************************/
-extern void il4965_update_chain_flags(struct il_priv *il);
-extern const u8 il_bcast_addr[ETH_ALEN];
-extern int il_queue_space(const struct il_queue *q);
-static inline int il_queue_used(const struct il_queue *q, int i)
-{
- return q->write_ptr >= q->read_ptr ?
- (i >= q->read_ptr && i < q->write_ptr) :
- !(i < q->read_ptr && i >= q->write_ptr);
-}
-
-
-static inline u8 il_get_cmd_idx(struct il_queue *q, u32 idx,
- int is_huge)
-{
- /*
- * This is for init calibration result and scan command which
- * required buffer > TFD_MAX_PAYLOAD_SIZE,
- * the big buffer at end of command array
- */
- if (is_huge)
- return q->n_win; /* must be power of 2 */
-
- /* Otherwise, use normal size buffers */
- return idx & (q->n_win - 1);
-}
-
-
-struct il_dma_ptr {
- dma_addr_t dma;
- void *addr;
- size_t size;
-};
-
-#define IL_OPERATION_MODE_AUTO 0
-#define IL_OPERATION_MODE_HT_ONLY 1
-#define IL_OPERATION_MODE_MIXED 2
-#define IL_OPERATION_MODE_20MHZ 3
-
-#define IL_TX_CRC_SIZE 4
-#define IL_TX_DELIMITER_SIZE 4
-
-#define TX_POWER_IL_ILLEGAL_VOLTAGE -10000
-
-/* Sensitivity and chain noise calibration */
-#define INITIALIZATION_VALUE 0xFFFF
-#define IL4965_CAL_NUM_BEACONS 20
-#define IL_CAL_NUM_BEACONS 16
-#define MAXIMUM_ALLOWED_PATHLOSS 15
-
-#define CHAIN_NOISE_MAX_DELTA_GAIN_CODE 3
-
-#define MAX_FA_OFDM 50
-#define MIN_FA_OFDM 5
-#define MAX_FA_CCK 50
-#define MIN_FA_CCK 5
-
-#define AUTO_CORR_STEP_OFDM 1
-
-#define AUTO_CORR_STEP_CCK 3
-#define AUTO_CORR_MAX_TH_CCK 160
-
-#define NRG_DIFF 2
-#define NRG_STEP_CCK 2
-#define NRG_MARGIN 8
-#define MAX_NUMBER_CCK_NO_FA 100
-
-#define AUTO_CORR_CCK_MIN_VAL_DEF (125)
-
-#define CHAIN_A 0
-#define CHAIN_B 1
-#define CHAIN_C 2
-#define CHAIN_NOISE_DELTA_GAIN_INIT_VAL 4
-#define ALL_BAND_FILTER 0xFF00
-#define IN_BAND_FILTER 0xFF
-#define MIN_AVERAGE_NOISE_MAX_VALUE 0xFFFFFFFF
-
-#define NRG_NUM_PREV_STAT_L 20
-#define NUM_RX_CHAINS 3
-
-enum il4965_false_alarm_state {
- IL_FA_TOO_MANY = 0,
- IL_FA_TOO_FEW = 1,
- IL_FA_GOOD_RANGE = 2,
-};
-
-enum il4965_chain_noise_state {
- IL_CHAIN_NOISE_ALIVE = 0, /* must be 0 */
- IL_CHAIN_NOISE_ACCUMULATE,
- IL_CHAIN_NOISE_CALIBRATED,
- IL_CHAIN_NOISE_DONE,
-};
-
-enum il4965_calib_enabled_state {
- IL_CALIB_DISABLED = 0, /* must be 0 */
- IL_CALIB_ENABLED = 1,
-};
-
-/*
- * enum il_calib
- * defines the order in which results of initial calibrations
- * should be sent to the runtime uCode
- */
-enum il_calib {
- IL_CALIB_MAX,
-};
-
-/* Opaque calibration results */
-struct il_calib_result {
- void *buf;
- size_t buf_len;
-};
-
-enum ucode_type {
- UCODE_NONE = 0,
- UCODE_INIT,
- UCODE_RT
-};
-
-/* Sensitivity calib data */
-struct il_sensitivity_data {
- u32 auto_corr_ofdm;
- u32 auto_corr_ofdm_mrc;
- u32 auto_corr_ofdm_x1;
- u32 auto_corr_ofdm_mrc_x1;
- u32 auto_corr_cck;
- u32 auto_corr_cck_mrc;
-
- u32 last_bad_plcp_cnt_ofdm;
- u32 last_fa_cnt_ofdm;
- u32 last_bad_plcp_cnt_cck;
- u32 last_fa_cnt_cck;
-
- u32 nrg_curr_state;
- u32 nrg_prev_state;
- u32 nrg_value[10];
- u8 nrg_silence_rssi[NRG_NUM_PREV_STAT_L];
- u32 nrg_silence_ref;
- u32 nrg_energy_idx;
- u32 nrg_silence_idx;
- u32 nrg_th_cck;
- s32 nrg_auto_corr_silence_diff;
- u32 num_in_cck_no_fa;
- u32 nrg_th_ofdm;
-
- u16 barker_corr_th_min;
- u16 barker_corr_th_min_mrc;
- u16 nrg_th_cca;
-};
-
-/* Chain noise (differential Rx gain) calib data */
-struct il_chain_noise_data {
- u32 active_chains;
- u32 chain_noise_a;
- u32 chain_noise_b;
- u32 chain_noise_c;
- u32 chain_signal_a;
- u32 chain_signal_b;
- u32 chain_signal_c;
- u16 beacon_count;
- u8 disconn_array[NUM_RX_CHAINS];
- u8 delta_gain_code[NUM_RX_CHAINS];
- u8 radio_write;
- u8 state;
-};
-
-#define EEPROM_SEM_TIMEOUT 10 /* milliseconds */
-#define EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */
-
-#define IL_TRAFFIC_ENTRIES (256)
-#define IL_TRAFFIC_ENTRY_SIZE (64)
-
-enum {
- MEASUREMENT_READY = (1 << 0),
- MEASUREMENT_ACTIVE = (1 << 1),
-};
-
-/* interrupt stats */
-struct isr_stats {
- u32 hw;
- u32 sw;
- u32 err_code;
- u32 sch;
- u32 alive;
- u32 rfkill;
- u32 ctkill;
- u32 wakeup;
- u32 rx;
- u32 handlers[IL_CN_MAX];
- u32 tx;
- u32 unhandled;
-};
-
-/* management stats */
-enum il_mgmt_stats {
- MANAGEMENT_ASSOC_REQ = 0,
- MANAGEMENT_ASSOC_RESP,
- MANAGEMENT_REASSOC_REQ,
- MANAGEMENT_REASSOC_RESP,
- MANAGEMENT_PROBE_REQ,
- MANAGEMENT_PROBE_RESP,
- MANAGEMENT_BEACON,
- MANAGEMENT_ATIM,
- MANAGEMENT_DISASSOC,
- MANAGEMENT_AUTH,
- MANAGEMENT_DEAUTH,
- MANAGEMENT_ACTION,
- MANAGEMENT_MAX,
-};
-/* control stats */
-enum il_ctrl_stats {
- CONTROL_BACK_REQ = 0,
- CONTROL_BACK,
- CONTROL_PSPOLL,
- CONTROL_RTS,
- CONTROL_CTS,
- CONTROL_ACK,
- CONTROL_CFEND,
- CONTROL_CFENDACK,
- CONTROL_MAX,
-};
-
-struct traffic_stats {
-#ifdef CONFIG_IWLEGACY_DEBUGFS
- u32 mgmt[MANAGEMENT_MAX];
- u32 ctrl[CONTROL_MAX];
- u32 data_cnt;
- u64 data_bytes;
-#endif
-};
-
-/*
- * host interrupt timeout value
- * used with setting interrupt coalescing timer
- * the CSR_INT_COALESCING is an 8 bit register in 32-usec unit
- *
- * default interrupt coalescing timer is 64 x 32 = 2048 usecs
- * default interrupt coalescing calibration timer is 16 x 32 = 512 usecs
- */
-#define IL_HOST_INT_TIMEOUT_MAX (0xFF)
-#define IL_HOST_INT_TIMEOUT_DEF (0x40)
-#define IL_HOST_INT_TIMEOUT_MIN (0x0)
-#define IL_HOST_INT_CALIB_TIMEOUT_MAX (0xFF)
-#define IL_HOST_INT_CALIB_TIMEOUT_DEF (0x10)
-#define IL_HOST_INT_CALIB_TIMEOUT_MIN (0x0)
-
-#define IL_DELAY_NEXT_FORCE_FW_RELOAD (HZ*5)
-
-/* TX queue watchdog timeouts in mSecs */
-#define IL_DEF_WD_TIMEOUT (2000)
-#define IL_LONG_WD_TIMEOUT (10000)
-#define IL_MAX_WD_TIMEOUT (120000)
-
-struct il_force_reset {
- int reset_request_count;
- int reset_success_count;
- int reset_reject_count;
- unsigned long reset_duration;
- unsigned long last_force_reset_jiffies;
-};
-
-/* extend beacon time format bit shifting */
-/*
- * for _3945 devices
- * bits 31:24 - extended
- * bits 23:0 - interval
- */
-#define IL3945_EXT_BEACON_TIME_POS 24
-/*
- * for _4965 devices
- * bits 31:22 - extended
- * bits 21:0 - interval
- */
-#define IL4965_EXT_BEACON_TIME_POS 22
-
-struct il_rxon_context {
- struct ieee80211_vif *vif;
-
- const u8 *ac_to_fifo;
- const u8 *ac_to_queue;
- u8 mcast_queue;
-
- /*
- * We could use the vif to indicate active, but we
- * also need it to be active during disabling when
- * we already removed the vif for type setting.
- */
- bool always_active, is_active;
-
- bool ht_need_multiple_chains;
-
- int ctxid;
-
- u32 interface_modes, exclusive_interface_modes;
- u8 unused_devtype, ap_devtype, ibss_devtype, station_devtype;
-
- /*
- * We declare this const so it can only be
- * changed via explicit cast within the
- * routines that actually update the physical
- * hardware.
- */
- const struct il_rxon_cmd active;
- struct il_rxon_cmd staging;
-
- struct il_rxon_time_cmd timing;
-
- struct il_qos_info qos_data;
-
- u8 bcast_sta_id, ap_sta_id;
-
- u8 rxon_cmd, rxon_assoc_cmd, rxon_timing_cmd;
- u8 qos_cmd;
- u8 wep_key_cmd;
-
- struct il_wep_key wep_keys[WEP_KEYS_MAX];
- u8 key_mapping_keys;
-
- __le32 station_flags;
-
- struct {
- bool non_gf_sta_present;
- u8 protection;
- bool enabled, is_40mhz;
- u8 extension_chan_offset;
- } ht;
-};
-
-struct il_priv {
-
- /* ieee device used by generic ieee processing code */
- struct ieee80211_hw *hw;
- struct ieee80211_channel *ieee_channels;
- struct ieee80211_rate *ieee_rates;
- struct il_cfg *cfg;
-
- /* temporary frame storage list */
- struct list_head free_frames;
- int frames_count;
-
- enum ieee80211_band band;
- int alloc_rxb_page;
-
- void (*handlers[IL_CN_MAX])(struct il_priv *il,
- struct il_rx_buf *rxb);
-
- struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS];
-
- /* spectrum measurement report caching */
- struct il_spectrum_notification measure_report;
- u8 measurement_status;
-
- /* ucode beacon time */
- u32 ucode_beacon_time;
- int missed_beacon_threshold;
-
- /* track IBSS manager (last beacon) status */
- u32 ibss_manager;
-
- /* force reset */
- struct il_force_reset force_reset;
-
- /* we allocate array of il_channel_info for NIC's valid channels.
- * Access via channel # using indirect idx array */
- struct il_channel_info *channel_info; /* channel info array */
- u8 channel_count; /* # of channels */
-
- /* thermal calibration */
- s32 temperature; /* degrees Kelvin */
- s32 last_temperature;
-
- /* init calibration results */
- struct il_calib_result calib_results[IL_CALIB_MAX];
-
- /* Scan related variables */
- unsigned long scan_start;
- unsigned long scan_start_tsf;
- void *scan_cmd;
- enum ieee80211_band scan_band;
- struct cfg80211_scan_request *scan_request;
- struct ieee80211_vif *scan_vif;
- u8 scan_tx_ant[IEEE80211_NUM_BANDS];
- u8 mgmt_tx_ant;
-
- /* spinlock */
- spinlock_t lock; /* protect general shared data */
- spinlock_t hcmd_lock; /* protect hcmd */
- spinlock_t reg_lock; /* protect hw register access */
- struct mutex mutex;
-
- /* basic pci-network driver stuff */
- struct pci_dev *pci_dev;
-
- /* pci hardware address support */
- void __iomem *hw_base;
- u32 hw_rev;
- u32 hw_wa_rev;
- u8 rev_id;
-
- /* command queue number */
- u8 cmd_queue;
-
- /* max number of station keys */
- u8 sta_key_max_num;
-
- /* EEPROM MAC addresses */
- struct mac_address addresses[1];
-
- /* uCode images, save to reload in case of failure */
- int fw_idx; /* firmware we're trying to load */
- u32 ucode_ver; /* version of ucode, copy of
- il_ucode.ver */
- struct fw_desc ucode_code; /* runtime inst */
- struct fw_desc ucode_data; /* runtime data original */
- struct fw_desc ucode_data_backup; /* runtime data save/restore */
- struct fw_desc ucode_init; /* initialization inst */
- struct fw_desc ucode_init_data; /* initialization data */
- struct fw_desc ucode_boot; /* bootstrap inst */
- enum ucode_type ucode_type;
- u8 ucode_write_complete; /* the image write is complete */
- char firmware_name[25];
-
- struct il_rxon_context ctx;
-
- __le16 switch_channel;
-
- /* 1st responses from initialize and runtime uCode images.
- * _4965's initialize alive response contains some calibration data. */
- struct il_init_alive_resp card_alive_init;
- struct il_alive_resp card_alive;
-
- u16 active_rate;
-
- u8 start_calib;
- struct il_sensitivity_data sensitivity_data;
- struct il_chain_noise_data chain_noise_data;
- __le16 sensitivity_tbl[HD_TBL_SIZE];
-
- struct il_ht_config current_ht_config;
-
- /* Rate scaling data */
- u8 retry_rate;
-
- wait_queue_head_t wait_command_queue;
-
- int activity_timer_active;
-
- /* Rx and Tx DMA processing queues */
- struct il_rx_queue rxq;
- struct il_tx_queue *txq;
- unsigned long txq_ctx_active_msk;
- struct il_dma_ptr kw; /* keep warm address */
- struct il_dma_ptr scd_bc_tbls;
-
- u32 scd_base_addr; /* scheduler sram base address */
-
- unsigned long status;
-
- /* counts mgmt, ctl, and data packets */
- struct traffic_stats tx_stats;
- struct traffic_stats rx_stats;
-
- /* counts interrupts */
- struct isr_stats isr_stats;
-
- struct il_power_mgr power_data;
-
- /* context information */
- u8 bssid[ETH_ALEN]; /* used only on 3945 but filled by core */
-
- /* station table variables */
-
- /* Note: if lock and sta_lock are needed, lock must be acquired first */
- spinlock_t sta_lock;
- int num_stations;
- struct il_station_entry stations[IL_STATION_COUNT];
- unsigned long ucode_key_table;
-
- /* queue refcounts */
-#define IL_MAX_HW_QUEUES 32
- unsigned long queue_stopped[BITS_TO_LONGS(IL_MAX_HW_QUEUES)];
- /* for each AC */
- atomic_t queue_stop_count[4];
-
- /* Indication if ieee80211_ops->open has been called */
- u8 is_open;
-
- u8 mac80211_registered;
-
- /* eeprom -- this is in the card's little endian byte order */
- u8 *eeprom;
- struct il_eeprom_calib_info *calib_info;
-
- enum nl80211_iftype iw_mode;
-
- /* Last Rx'd beacon timestamp */
- u64 timestamp;
-
- union {
-#if defined(CONFIG_IWL3945) || defined(CONFIG_IWL3945_MODULE)
- struct {
- void *shared_virt;
- dma_addr_t shared_phys;
-
- struct delayed_work thermal_periodic;
- struct delayed_work rfkill_poll;
-
- struct il3945_notif_stats stats;
-#ifdef CONFIG_IWLEGACY_DEBUGFS
- struct il3945_notif_stats accum_stats;
- struct il3945_notif_stats delta_stats;
- struct il3945_notif_stats max_delta;
-#endif
-
- u32 sta_supp_rates;
- int last_rx_rssi; /* From Rx packet stats */
-
- /* Rx'd packet timing information */
- u32 last_beacon_time;
- u64 last_tsf;
-
- /*
- * each calibration channel group in the
- * EEPROM has a derived clip setting for
- * each rate.
- */
- const struct il3945_clip_group clip_groups[5];
-
- } _3945;
-#endif
-#if defined(CONFIG_IWL4965) || defined(CONFIG_IWL4965_MODULE)
- struct {
- struct il_rx_phy_res last_phy_res;
- bool last_phy_res_valid;
-
- struct completion firmware_loading_complete;
-
- /*
- * chain noise reset and gain commands are the
- * two extra calibration commands follows the standard
- * phy calibration commands
- */
- u8 phy_calib_chain_noise_reset_cmd;
- u8 phy_calib_chain_noise_gain_cmd;
-
- struct il_notif_stats stats;
-#ifdef CONFIG_IWLEGACY_DEBUGFS
- struct il_notif_stats accum_stats;
- struct il_notif_stats delta_stats;
- struct il_notif_stats max_delta;
-#endif
-
- } _4965;
-#endif
- };
-
- struct il_hw_params hw_params;
-
- u32 inta_mask;
-
- struct workqueue_struct *workqueue;
-
- struct work_struct restart;
- struct work_struct scan_completed;
- struct work_struct rx_replenish;
- struct work_struct abort_scan;
-
- struct il_rxon_context *beacon_ctx;
- struct sk_buff *beacon_skb;
-
- struct work_struct tx_flush;
-
- struct tasklet_struct irq_tasklet;
-
- struct delayed_work init_alive_start;
- struct delayed_work alive_start;
- struct delayed_work scan_check;
-
- /* TX Power */
- s8 tx_power_user_lmt;
- s8 tx_power_device_lmt;
- s8 tx_power_next;
-
-
-#ifdef CONFIG_IWLEGACY_DEBUG
- /* debugging info */
- u32 debug_level; /* per device debugging will override global
- il_debug_level if set */
-#endif /* CONFIG_IWLEGACY_DEBUG */
-#ifdef CONFIG_IWLEGACY_DEBUGFS
- /* debugfs */
- u16 tx_traffic_idx;
- u16 rx_traffic_idx;
- u8 *tx_traffic;
- u8 *rx_traffic;
- struct dentry *debugfs_dir;
- u32 dbgfs_sram_offset, dbgfs_sram_len;
- bool disable_ht40;
-#endif /* CONFIG_IWLEGACY_DEBUGFS */
-
- struct work_struct txpower_work;
- u32 disable_sens_cal;
- u32 disable_chain_noise_cal;
- u32 disable_tx_power_cal;
- struct work_struct run_time_calib_work;
- struct timer_list stats_periodic;
- struct timer_list watchdog;
- bool hw_ready;
-
- struct led_classdev led;
- unsigned long blink_on, blink_off;
- bool led_registered;
-}; /*il_priv */
-
-static inline void il_txq_ctx_activate(struct il_priv *il, int txq_id)
-{
- set_bit(txq_id, &il->txq_ctx_active_msk);
-}
-
-static inline void il_txq_ctx_deactivate(struct il_priv *il, int txq_id)
-{
- clear_bit(txq_id, &il->txq_ctx_active_msk);
-}
-
-#ifdef CONFIG_IWLEGACY_DEBUG
-/*
- * il_get_debug_level: Return active debug level for device
- *
- * Using sysfs it is possible to set per device debug level. This debug
- * level will be used if set, otherwise the global debug level which can be
- * set via module parameter is used.
- */
-static inline u32 il_get_debug_level(struct il_priv *il)
-{
- if (il->debug_level)
- return il->debug_level;
- else
- return il_debug_level;
-}
-#else
-static inline u32 il_get_debug_level(struct il_priv *il)
-{
- return il_debug_level;
-}
-#endif
-
-
-static inline struct ieee80211_hdr *
-il_tx_queue_get_hdr(struct il_priv *il,
- int txq_id, int idx)
-{
- if (il->txq[txq_id].txb[idx].skb)
- return (struct ieee80211_hdr *)il->txq[txq_id].
- txb[idx].skb->data;
- return NULL;
-}
-
-static inline struct il_rxon_context *
-il_rxon_ctx_from_vif(struct ieee80211_vif *vif)
-{
- struct il_vif_priv *vif_priv = (void *)vif->drv_priv;
-
- return vif_priv->ctx;
-}
-
-#define for_each_context(il, _ctx) \
- for (_ctx = &il->ctx; _ctx == &il->ctx; _ctx++)
-
-static inline int il_is_associated(struct il_priv *il)
-{
- return (il->ctx.active.filter_flags & RXON_FILTER_ASSOC_MSK) ? 1 : 0;
-}
-
-static inline int il_is_any_associated(struct il_priv *il)
-{
- return il_is_associated(il);
-}
-
-static inline int il_is_associated_ctx(struct il_rxon_context *ctx)
-{
- return (ctx->active.filter_flags & RXON_FILTER_ASSOC_MSK) ? 1 : 0;
-}
-
-static inline int il_is_channel_valid(const struct il_channel_info *ch_info)
-{
- if (ch_info == NULL)
- return 0;
- return (ch_info->flags & EEPROM_CHANNEL_VALID) ? 1 : 0;
-}
-
-static inline int il_is_channel_radar(const struct il_channel_info *ch_info)
-{
- return (ch_info->flags & EEPROM_CHANNEL_RADAR) ? 1 : 0;
-}
-
-static inline u8 il_is_channel_a_band(const struct il_channel_info *ch_info)
-{
- return ch_info->band == IEEE80211_BAND_5GHZ;
-}
-
-static inline int
-il_is_channel_passive(const struct il_channel_info *ch)
-{
- return (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) ? 1 : 0;
-}
-
-static inline int
-il_is_channel_ibss(const struct il_channel_info *ch)
-{
- return (ch->flags & EEPROM_CHANNEL_IBSS) ? 1 : 0;
-}
-
-static inline void
-__il_free_pages(struct il_priv *il, struct page *page)
-{
- __free_pages(page, il->hw_params.rx_page_order);
- il->alloc_rxb_page--;
-}
-
-static inline void il_free_pages(struct il_priv *il, unsigned long page)
-{
- free_pages(page, il->hw_params.rx_page_order);
- il->alloc_rxb_page--;
-}
-#endif /* __il_dev_h__ */
projects / mirror_ubuntu-eoan-kernel.git / commitdiff