.name = "timer2",
.parent = &pll1_aux_clk,
.lpsc = DAVINCI_LPSC_TIMER2,
- .usecount = 1, /* REVISIT: why can't' this be disabled? */
+ .usecount = 1, /* REVISIT: why can't this be disabled? */
};
static struct clk timer3_clk = {
.name = "timer2",
.parent = &pll1_aux_clk,
.lpsc = DAVINCI_LPSC_TIMER2,
- .usecount = 1, /* REVISIT: why can't' this be disabled? */
+ .usecount = 1, /* REVISIT: why can't this be disabled? */
};
static struct clk_lookup dm644x_clks[] = {
*
* Obviously, the GART is not cache coherent and so any change to it
* must be flushed to memory (or maybe just make the GART space non
- * cachable). AGP memory itself does't seem to be cache coherent neither.
+ * cachable). AGP memory itself doesn't seem to be cache coherent neither.
*
* In order to invalidate the GART (which is probably necessary to inval
* the bridge internal TLBs), the following sequence has to be written,
/*
* Keep chip from being accessed until we are ready. Use
* writeq() directly, to allow the write even though QIB_PRESENT
- * isn't' set.
+ * isn't set.
*/
dd->flags &= ~(QIB_INITTED | QIB_PRESENT);
dd->int_counter = 0; /* so we check interrupts work again */
/*
* Keep chip from being accessed until we are ready. Use
* writeq() directly, to allow the write even though QIB_PRESENT
- * isn't' set.
+ * isn't set.
*/
dd->flags &= ~(QIB_INITTED | QIB_PRESENT);
dd->int_counter = 0; /* so we check interrupts work again */
/*
* Keep chip from being accessed until we are ready. Use
* writeq() directly, to allow the write even though QIB_PRESENT
- * isn't' set.
+ * isn't set.
*/
dd->flags &= ~(QIB_INITTED | QIB_PRESENT | QIB_BADINTR);
dd->flags |= QIB_DOING_RESET;
return 0;
}
-/* !!! not tested, in my card this does't work !!! */
+/* !!! not tested, in my card this doesn't work !!! */
static int fmr2_setvolume(struct fmr2 *dev)
{
int vol[16] = { 0x021, 0x084, 0x090, 0x104,
doc200x_hwcontrol(mtd, 0, NAND_CTRL_ALE | NAND_CTRL_CHANGE);
doc200x_hwcontrol(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
- /* We can't' use dev_ready here, but at least we wait for the
+ /* We can't use dev_ready here, but at least we wait for the
* command to complete
*/
udelay(50);
c = p_dev->function_config;
if (!(c->state & CONFIG_LOCKED)) {
- dev_dbg(&p_dev->dev, "Configuration isn't't locked\n");
+ dev_dbg(&p_dev->dev, "Configuration isn't locked\n");
mutex_unlock(&s->ops_mutex);
return -EACCES;
}
return (NDIS_STATUS_FAILURE);
}
}
- /* Drop not U2M frames, can't's drop here because we will drop beacon in this case */
+ /* Drop not U2M frames, can't drop here because we will drop beacon in this case */
/* I am kind of doubting the U2M bit operation */
/* if (pRxD->U2M == 0) */
/* return(NDIS_STATUS_FAILURE); */
DBGPRINT_RAW(RT_DEBUG_ERROR, ("received packet too long\n"));
return NDIS_STATUS_FAILURE;
}
- /* Drop not U2M frames, can't's drop here because we will drop beacon in this case */
+ /* Drop not U2M frames, can't drop here because we will drop beacon in this case */
/* I am kind of doubting the U2M bit operation */
/* if (pRxD->U2M == 0) */
/* return(NDIS_STATUS_FAILURE); */
}
dev->queue->queuedata = dev;
- /* As Linux block layer does't support >4KB hardware sector, */
+ /* As Linux block layer doesn't support >4KB hardware sector, */
/* Here we force report 512 byte hardware sector size to Kernel */
blk_queue_logical_block_size(dev->queue, 512);
* as a temporary for .dllview record construction.
* Allocate storage for the whole table. Add 1 to the section count
* in case a trampoline section is auto-generated as well as the
- * size of the trampoline section name so DLLView does't get lost.
+ * size of the trampoline section name so DLLView doesn't get lost.
*/
siz = sym_count * sizeof(struct local_symbol);
spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_CAR, port_No(port));
- /* The Specialix board does't implement the RTS lines.
+ /* The Specialix board doesn't implement the RTS lines.
They are used to set the IRQ level. Don't touch them. */
if (sx_crtscts(tty))
port->MSVR = MSVR_DTR | (sx_in(bp, CD186x_MSVR) & MSVR_RTS);
u64 total_bytes; /* total bytes in the space,
this doesn't take mirrors into account */
u64 bytes_used; /* total bytes used,
- this does't take mirrors into account */
+ this doesn't take mirrors into account */
u64 bytes_pinned; /* total bytes pinned, will be freed when the
transaction finishes */
u64 bytes_reserved; /* total bytes the allocator has reserved for
__le16 xe_name_offset; /* byte offset from the 1st entry in the
local xattr storage(inode, xattr block or
xattr bucket). */
- __u8 xe_name_len; /* xattr name len, does't include prefix. */
+ __u8 xe_name_len; /* xattr name len, doesn't include prefix. */
__u8 xe_type; /* the low 7 bits indicate the name prefix
* type and the highest bit indicates whether
* the EA is stored in the local storage. */
MODULE_DESCRIPTION("L2TP over IP");
MODULE_VERSION("1.0");
-/* Use the value of SOCK_DGRAM (2) directory, because __stringify does't like
+/* Use the value of SOCK_DGRAM (2) directory, because __stringify doesn't like
* enums
*/
MODULE_ALIAS_NET_PF_PROTO_TYPE(PF_INET, 2, IPPROTO_L2TP);
memcpy(&ssf->ssf_info, &chunk->sinfo, sizeof(struct sctp_sndrcvinfo));
/* Per TSVWG discussion with Randy. Allow the application to
- * resemble a fragmented message.
+ * reassemble a fragmented message.
*/
ssf->ssf_info.sinfo_flags = chunk->chunk_hdr->flags;
/* analysing the volume and mixer tables shows
* that they are similar enough when we shift
* the mixer table down by 4 bits. The error
- * is minuscule, in just one item the error
+ * is miniscule, in just one item the error
* is 1, at a value of 0x07f17b (mixer table
* value is 0x07f17a) */
tmp = tas_gaintable[left];
projects / mirror_ubuntu-eoan-kernel.git / commitdiff