Uwe Kleine-König <ukl@pengutronix.de>
Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
+Viresh Kumar <viresh.linux@gmail.com> <viresh.kumar@st.com>
Takashi YOSHII <takashi.yoshii.zj@renesas.com>
Yusuke Goda <goda.yusuke@renesas.com>
Gustavo Padovan <gustavo@las.ic.unicamp.br>
-What: /sys/block/rssd*/registers
-Date: March 2012
-KernelVersion: 3.3
-Contact: Asai Thambi S P <asamymuthupa@micron.com>
-Description: This is a read-only file. Dumps below driver information and
- hardware registers.
- - S ACTive
- - Command Issue
- - Completed
- - PORT IRQ STAT
- - HOST IRQ STAT
- - Allocated
- - Commands in Q
-
What: /sys/block/rssd*/status
Date: April 2012
KernelVersion: 3.4
Contact: Asai Thambi S P <asamymuthupa@micron.com>
Description: This is a read-only file. Indicates the status of the device.
-
-What: /sys/block/rssd*/flags
-Date: May 2012
-KernelVersion: 3.5
-Contact: Asai Thambi S P <asamymuthupa@micron.com>
-Description: This is a read-only file. Dumps the flags in port and driver
- data structure
What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale
What: /sys/bus/iio/devices/iio:deviceX/in_voltage_scale
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_scale
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale
What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale
What: /sys/bus/iio/devices/iio:deviceX/in_accel_peak_scale
What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_scale
What: /sys/.../iio:deviceX/in_voltageX_scale_available
What: /sys/.../iio:deviceX/in_voltage-voltage_scale_available
What: /sys/.../iio:deviceX/out_voltageX_scale_available
+What: /sys/.../iio:deviceX/out_altvoltageX_scale_available
What: /sys/.../iio:deviceX/in_capacitance_scale_available
KernelVersion: 2.635
Contact: linux-iio@vger.kernel.org
gives the 3dB frequency of the filter in Hz.
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_raw
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_raw
KernelVersion: 2.6.37
Contact: linux-iio@vger.kernel.org
Description:
Raw (unscaled, no bias etc.) output voltage for
channel Y. The number must always be specified and
unique if the output corresponds to a single channel.
+ While DAC like devices typically use out_voltage,
+ a continuous frequency generating device, such as
+ a DDS or PLL should use out_altvoltage.
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY&Z_raw
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY&Z_raw
KernelVersion: 2.6.37
Contact: linux-iio@vger.kernel.org
Description:
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown_mode
What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown_mode
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown_mode
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown_mode
KernelVersion: 2.6.38
Contact: linux-iio@vger.kernel.org
Description:
What: /sys/.../iio:deviceX/out_votlageY_powerdown_mode_available
What: /sys/.../iio:deviceX/out_voltage_powerdown_mode_available
+What: /sys/.../iio:deviceX/out_altvotlageY_powerdown_mode_available
+What: /sys/.../iio:deviceX/out_altvoltage_powerdown_mode_available
KernelVersion: 2.6.38
Contact: linux-iio@vger.kernel.org
Description:
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown
What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown
KernelVersion: 2.6.38
Contact: linux-iio@vger.kernel.org
Description:
normal operation. Y may be suppressed if all outputs are
controlled together.
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency
+KernelVersion: 3.4.0
+Contact: linux-iio@vger.kernel.org
+Description:
+ Output frequency for channel Y in Hz. The number must always be
+ specified and unique if the output corresponds to a single
+ channel.
+
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_phase
+KernelVersion: 3.4.0
+Contact: linux-iio@vger.kernel.org
+Description:
+ Phase in radians of one frequency/clock output Y
+ (out_altvoltageY) relative to another frequency/clock output
+ (out_altvoltageZ) of the device X. The number must always be
+ specified and unique if the output corresponds to a single
+ channel.
+
What: /sys/bus/iio/devices/iio:deviceX/events
KernelVersion: 2.6.35
Contact: linux-iio@vger.kernel.org
Contact: linux-mtd@lists.infradead.org
Description:
This allows the user to examine and adjust the criteria by which
- mtd returns -EUCLEAN from mtd_read(). If the maximum number of
- bit errors that were corrected on any single region comprising
- an ecc step (as reported by the driver) equals or exceeds this
- value, -EUCLEAN is returned. Otherwise, absent an error, 0 is
- returned. Higher layers (e.g., UBI) use this return code as an
- indication that an erase block may be degrading and should be
- scrutinized as a candidate for being marked as bad.
+ mtd returns -EUCLEAN from mtd_read() and mtd_read_oob(). If the
+ maximum number of bit errors that were corrected on any single
+ region comprising an ecc step (as reported by the driver) equals
+ or exceeds this value, -EUCLEAN is returned. Otherwise, absent
+ an error, 0 is returned. Higher layers (e.g., UBI) use this
+ return code as an indication that an erase block may be
+ degrading and should be scrutinized as a candidate for being
+ marked as bad.
The initial value may be specified by the flash device driver.
If not, then the default value is ecc_strength.
block degradation, but high enough to avoid the consequences of
a persistent return value of -EUCLEAN on devices where sticky
bitflips occur. Note that if bitflip_threshold exceeds
- ecc_strength, -EUCLEAN is never returned by mtd_read().
+ ecc_strength, -EUCLEAN is never returned by the read operations.
Conversely, if bitflip_threshold is zero, -EUCLEAN is always
returned, absent a hard error.
from RGB to Y'CbCr color space.
</entry>
</row>
- <row id = "v4l2-jpeg-chroma-subsampling">
+ <row>
<entrytbl spanname="descr" cols="2">
<tbody valign="top">
<row>
<row id="V4L2-PIX-FMT-Y4">
<entry><constant>V4L2_PIX_FMT_Y4</constant></entry>
<entry>'Y04 '</entry>
- <entry>Old 4-bit greyscale format. Only the least significant 4 bits of each byte are used,
+ <entry>Old 4-bit greyscale format. Only the most significant 4 bits of each byte are used,
the other bits are set to 0.</entry>
</row>
<row id="V4L2-PIX-FMT-Y6">
<entry><constant>V4L2_PIX_FMT_Y6</constant></entry>
<entry>'Y06 '</entry>
- <entry>Old 6-bit greyscale format. Only the least significant 6 bits of each byte are used,
+ <entry>Old 6-bit greyscale format. Only the most significant 6 bits of each byte are used,
the other bits are set to 0.</entry>
</row>
</tbody>
&sub-g-tuner;
&sub-log-status;
&sub-overlay;
+ &sub-prepare-buf;
&sub-qbuf;
&sub-querybuf;
&sub-querycap;
&sub-query-dv-preset;
&sub-query-dv-timings;
&sub-querystd;
- &sub-prepare-buf;
&sub-reqbufs;
&sub-s-hw-freq-seek;
&sub-streamon;
/></entry>
</row>
<row>
- <entry>__u32</entry>
+ <entry>struct v4l2_format</entry>
<entry><structfield>format</structfield></entry>
- <entry>Filled in by the application, preserved by the driver.
- See <xref linkend="v4l2-format" />.</entry>
+ <entry>Filled in by the application, preserved by the driver.</entry>
</row>
<row>
<entry>__u32</entry>
<row>
<entry></entry>
<entry>&v4l2-event-frame-sync;</entry>
- <entry><structfield>frame</structfield></entry>
+ <entry><structfield>frame_sync</structfield></entry>
<entry>Event data for event V4L2_EVENT_FRAME_SYNC.</entry>
</row>
<row>
processing controls. These controls are described in <xref
linkend="image-process-controls" />.</entry>
</row>
- <row>
- <entry><constant>V4L2_CTRL_CLASS_JPEG</constant></entry>
- <entry>0x9d0000</entry>
- <entry>The class containing JPEG compression controls.
-These controls are described in <xref
- linkend="jpeg-controls" />.</entry>
- </row>
</tbody>
</tgroup>
</table>
Document Author
---------------
- Viresh Kumar <viresh.kumar@st.com>, (c) 2010-2012 ST Microelectronics
+ Viresh Kumar <viresh.linux@gmail.com>, (c) 2010-2012 ST Microelectronics
Construction Parameters
=======================
- <version> <dev> <hash_dev> <hash_start>
+ <version> <dev> <hash_dev>
<data_block_size> <hash_block_size>
<num_data_blocks> <hash_start_block>
<algorithm> <digest> <salt>
<version>
- This is the version number of the on-disk format.
+ This is the type of the on-disk hash format.
0 is the original format used in the Chromium OS.
- The salt is appended when hashing, digests are stored continuously and
- the rest of the block is padded with zeros.
+ The salt is appended when hashing, digests are stored continuously and
+ the rest of the block is padded with zeros.
1 is the current format that should be used for new devices.
- The salt is prepended when hashing and each digest is
- padded with zeros to the power of two.
+ The salt is prepended when hashing and each digest is
+ padded with zeros to the power of two.
<dev>
- This is the device containing the data the integrity of which needs to be
+ This is the device containing data, the integrity of which needs to be
checked. It may be specified as a path, like /dev/sdaX, or a device number,
<major>:<minor>.
<hash_dev>
- This is the device that that supplies the hash tree data. It may be
+ This is the device that supplies the hash tree data. It may be
specified similarly to the device path and may be the same device. If the
- same device is used, the hash_start should be outside of the dm-verity
- configured device size.
+ same device is used, the hash_start should be outside the configured
+ dm-verity device.
<data_block_size>
- The block size on a data device. Each block corresponds to one digest on
- the hash device.
+ The block size on a data device in bytes.
+ Each block corresponds to one digest on the hash device.
<hash_block_size>
- The size of a hash block.
+ The size of a hash block in bytes.
<num_data_blocks>
The number of data blocks on the data device. Additional blocks are
Theory of operation
===================
-dm-verity is meant to be setup as part of a verified boot path. This
+dm-verity is meant to be set up as part of a verified boot path. This
may be anything ranging from a boot using tboot or trustedgrub to just
booting from a known-good device (like a USB drive or CD).
has been authenticated in some way (cryptographic signatures, etc).
After instantiation, all hashes will be verified on-demand during
disk access. If they cannot be verified up to the root node of the
-tree, the root hash, then the I/O will fail. This should identify
+tree, the root hash, then the I/O will fail. This should detect
tampering with any data on the device and the hash data.
Cryptographic hashes are used to assert the integrity of the device on a
-per-block basis. This allows for a lightweight hash computation on first read
-into the page cache. Block hashes are stored linearly-aligned to the nearest
-block the size of a page.
+per-block basis. This allows for a lightweight hash computation on first read
+into the page cache. Block hashes are stored linearly, aligned to the nearest
+block size.
Hash Tree
---------
Each node in the tree is a cryptographic hash. If it is a leaf node, the hash
-is of some block data on disk. If it is an intermediary node, then the hash is
-of a number of child nodes.
+of some data block on disk is calculated. If it is an intermediary node,
+the hash of a number of child nodes is calculated.
Each entry in the tree is a collection of neighboring nodes that fit in one
block. The number is determined based on block_size and the size of the
On-disk format
==============
-Below is the recommended on-disk format. The verity kernel code does not
-read the on-disk header. It only reads the hash blocks which directly
-follow the header. It is expected that a user-space tool will verify the
-integrity of the verity_header and then call dmsetup with the correct
-parameters. Alternatively, the header can be omitted and the dmsetup
-parameters can be passed via the kernel command-line in a rooted chain
-of trust where the command-line is verified.
+The verity kernel code does not read the verity metadata on-disk header.
+It only reads the hash blocks which directly follow the header.
+It is expected that a user-space tool will verify the integrity of the
+verity header.
-The on-disk format is especially useful in cases where the hash blocks
-are on a separate partition. The magic number allows easy identification
-of the partition contents. Alternatively, the hash blocks can be stored
-in the same partition as the data to be verified. In such a configuration
-the filesystem on the partition would be sized a little smaller than
-the full-partition, leaving room for the hash blocks.
-
-struct superblock {
- uint8_t signature[8]
- "verity\0\0";
-
- uint8_t version;
- 1 - current format
-
- uint8_t data_block_bits;
- log2(data block size)
-
- uint8_t hash_block_bits;
- log2(hash block size)
-
- uint8_t pad1[1];
- zero padding
-
- uint16_t salt_size;
- big-endian salt size
-
- uint8_t pad2[2];
- zero padding
-
- uint32_t data_blocks_hi;
- big-endian high 32 bits of the 64-bit number of data blocks
-
- uint32_t data_blocks_lo;
- big-endian low 32 bits of the 64-bit number of data blocks
-
- uint8_t algorithm[16];
- cryptographic algorithm
-
- uint8_t salt[384];
- salt (the salt size is specified above)
-
- uint8_t pad3[88];
- zero padding to 512-byte boundary
-}
+Alternatively, the header can be omitted and the dmsetup parameters can
+be passed via the kernel command-line in a rooted chain of trust where
+the command-line is verified.
Directly following the header (and with sector number padded to the next hash
block boundary) are the hash blocks which are stored a depth at a time
(starting from the root), sorted in order of increasing index.
+The full specification of kernel parameters and on-disk metadata format
+is available at the cryptsetup project's wiki page
+ http://code.google.com/p/cryptsetup/wiki/DMVerity
+
Status
======
V (for Valid) is returned if every check performed so far was valid.
Example
=======
-
-Setup a device:
- dmsetup create vroot --table \
- "0 2097152 "\
- "verity 1 /dev/sda1 /dev/sda2 4096 4096 2097152 1 "\
+Set up a device:
+ # dmsetup create vroot --readonly --table \
+ "0 2097152 verity 1 /dev/sda1 /dev/sda2 4096 4096 262144 1 sha256 "\
"4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076 "\
"1234000000000000000000000000000000000000000000000000000000000000"
A command line tool veritysetup is available to compute or verify
-the hash tree or activate the kernel driver. This is available from
-the LVM2 upstream repository and may be supplied as a package called
-device-mapper-verity-tools:
- git://sources.redhat.com/git/lvm2
- http://sourceware.org/git/?p=lvm2.git
- http://sourceware.org/cgi-bin/cvsweb.cgi/LVM2/verity?cvsroot=lvm2
-
-veritysetup -a vroot /dev/sda1 /dev/sda2 \
- 4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076
+the hash tree or activate the kernel device. This is available from
+the cryptsetup upstream repository http://code.google.com/p/cryptsetup/
+(as a libcryptsetup extension).
+
+Create hash on the device:
+ # veritysetup format /dev/sda1 /dev/sda2
+ ...
+ Root hash: 4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076
+
+Activate the device:
+ # veritysetup create vroot /dev/sda1 /dev/sda2 \
+ 4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076
--- /dev/null
+Pinctrl-based I2C Bus Mux
+
+This binding describes an I2C bus multiplexer that uses pin multiplexing to
+route the I2C signals, and represents the pin multiplexing configuration
+using the pinctrl device tree bindings.
+
+ +-----+ +-----+
+ | dev | | dev |
+ +------------------------+ +-----+ +-----+
+ | SoC | | |
+ | /----|------+--------+
+ | +---+ +------+ | child bus A, on first set of pins
+ | |I2C|---|Pinmux| |
+ | +---+ +------+ | child bus B, on second set of pins
+ | \----|------+--------+--------+
+ | | | | |
+ +------------------------+ +-----+ +-----+ +-----+
+ | dev | | dev | | dev |
+ +-----+ +-----+ +-----+
+
+Required properties:
+- compatible: i2c-mux-pinctrl
+- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side
+ port is connected to.
+
+Also required are:
+
+* Standard pinctrl properties that specify the pin mux state for each child
+ bus. See ../pinctrl/pinctrl-bindings.txt.
+
+* Standard I2C mux properties. See mux.txt in this directory.
+
+* I2C child bus nodes. See mux.txt in this directory.
+
+For each named state defined in the pinctrl-names property, an I2C child bus
+will be created. I2C child bus numbers are assigned based on the index into
+the pinctrl-names property.
+
+The only exception is that no bus will be created for a state named "idle". If
+such a state is defined, it must be the last entry in pinctrl-names. For
+example:
+
+ pinctrl-names = "ddc", "pta", "idle" -> ddc = bus 0, pta = bus 1
+ pinctrl-names = "ddc", "idle", "pta" -> Invalid ("idle" not last)
+ pinctrl-names = "idle", "ddc", "pta" -> Invalid ("idle" not last)
+
+Whenever an access is made to a device on a child bus, the relevant pinctrl
+state will be programmed into hardware.
+
+If an idle state is defined, whenever an access is not being made to a device
+on a child bus, the idle pinctrl state will be programmed into hardware.
+
+If an idle state is not defined, the most recently used pinctrl state will be
+left programmed into hardware whenever no access is being made of a device on
+a child bus.
+
+Example:
+
+ i2cmux {
+ compatible = "i2c-mux-pinctrl";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c-parent = <&i2c1>;
+
+ pinctrl-names = "ddc", "pta", "idle";
+ pinctrl-0 = <&state_i2cmux_ddc>;
+ pinctrl-1 = <&state_i2cmux_pta>;
+ pinctrl-2 = <&state_i2cmux_idle>;
+
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom {
+ compatible = "eeprom";
+ reg = <0x50>;
+ };
+ };
+
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom {
+ compatible = "eeprom";
+ reg = <0x50>;
+ };
+ };
+ };
+
Required properties:
- compatible : "fsl,mma8450".
+- reg: the I2C address of MMA8450
Example:
ecspi@70010000 { /* ECSPI1 */
fsl,spi-num-chipselects = <2>;
- cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */
- <&gpio3 25 0>; /* GPIO4_25 */
+ cs-gpios = <&gpio4 24 0>, /* GPIO4_24 */
+ <&gpio4 25 0>; /* GPIO4_25 */
status = "okay";
pmic: mc13892@0 {
compatible = "fsl,imx51-esdhc";
reg = <0x70008000 0x4000>;
interrupts = <2>;
- cd-gpios = <&gpio0 6 0>; /* GPIO1_6 */
- wp-gpios = <&gpio0 5 0>; /* GPIO1_5 */
+ cd-gpios = <&gpio1 6 0>; /* GPIO1_6 */
+ wp-gpios = <&gpio1 5 0>; /* GPIO1_5 */
};
reg = <0x83fec000 0x4000>;
interrupts = <87>;
phy-mode = "mii";
- phy-reset-gpios = <&gpio1 14 0>; /* GPIO2_14 */
+ phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */
local-mac-address = [00 04 9F 01 1B B9];
};
MX6Q_PAD_SD2_DAT3__GPIO_1_12 1588
MX6Q_PAD_SD2_DAT3__SJC_DONE 1589
MX6Q_PAD_SD2_DAT3__ANATOP_TESTO_3 1590
+MX6Q_PAD_ENET_RX_ER__ANATOP_USBOTG_ID 1591
+MX6Q_PAD_GPIO_1__ANATOP_USBOTG_ID 1592
reg = <0x70010000 0x4000>;
interrupts = <36>;
fsl,spi-num-chipselects = <2>;
- cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */
- <&gpio3 25 0>; /* GPIO4_25 */
+ cs-gpios = <&gpio3 24 0>, /* GPIO3_24 */
+ <&gpio3 25 0>; /* GPIO3_25 */
};
--- /dev/null
+* SPEAr Thermal
+
+Required properties:
+- compatible : "st,thermal-spear1340"
+- reg : Address range of the thermal registers
+- st,thermal-flags: flags used to enable thermal sensor
+
+Example:
+
+ thermal@fc000000 {
+ compatible = "st,thermal-spear1340";
+ reg = <0xfc000000 0x1000>;
+ st,thermal-flags = <0x7000>;
+ };
This isn't an exhaustive list, but you should add new prefixes to it before
using them to avoid name-space collisions.
+ad Avionic Design GmbH
adi Analog Devices, Inc.
amcc Applied Micro Circuits Corporation (APM, formally AMCC)
apm Applied Micro Circuits Corporation (APM)
Prefix: 'coretemp'
CPUID: family 0x6, models 0xe (Pentium M DC), 0xf (Core 2 DC 65nm),
0x16 (Core 2 SC 65nm), 0x17 (Penryn 45nm),
- 0x1a (Nehalem), 0x1c (Atom), 0x1e (Lynnfield)
+ 0x1a (Nehalem), 0x1c (Atom), 0x1e (Lynnfield),
+ 0x26 (Tunnel Creek Atom), 0x27 (Medfield Atom),
+ 0x36 (Cedar Trail Atom)
Datasheet: Intel 64 and IA-32 Architectures Software Developer's Manual
Volume 3A: System Programming Guide
http://softwarecommunity.intel.com/Wiki/Mobility/720.htm
Process Processor TjMax(C)
+22nm Core i5/i7 Processors
+ i7 3920XM, 3820QM, 3720QM, 3667U, 3520M 105
+ i5 3427U, 3360M/3320M 105
+ i7 3770/3770K 105
+ i5 3570/3570K, 3550, 3470/3450 105
+ i7 3770S 103
+ i5 3570S/3550S, 3475S/3470S/3450S 103
+ i7 3770T 94
+ i5 3570T 94
+ i5 3470T 91
+
32nm Core i3/i5/i7 Processors
i7 660UM/640/620, 640LM/620, 620M, 610E 105
i5 540UM/520/430, 540M/520/450/430 105
U3400 105
P4505/P4500 90
+32nm Atom Processors
+ Z2460 90
+ D2700/2550/2500 100
+ N2850/2800/2650/2600 100
+
45nm Xeon Processors 5400 Quad-Core
X5492, X5482, X5472, X5470, X5460, X5450 85
E5472, E5462, E5450/40/30/20/10/05 85
N475/470/455/450 100
N280/270 90
330/230 125
+ E680/660/640/620 90
+ E680T/660T/640T/620T 110
45nm Core2 Processors
Solo ULV SU3500/3300 100
http://www.kernel.org/git/?p=utils/kernel/kexec/kexec-tools.git
More information about kexec-tools can be found at
-http://www.kernel.org/pub/linux/utils/kernel/kexec/README.html
+http://horms.net/projects/kexec/
3) Unpack the tarball with the tar command, as follows:
sched_debug [KNL] Enables verbose scheduler debug messages.
+ skew_tick= [KNL] Offset the periodic timer tick per cpu to mitigate
+ xtime_lock contention on larger systems, and/or RCU lock
+ contention on all systems with CONFIG_MAXSMP set.
+ Format: { "0" | "1" }
+ 0 -- disable. (may be 1 via CONFIG_CMDLINE="skew_tick=1"
+ 1 -- enable.
+ Note: increases power consumption, thus should only be
+ enabled if running jitter sensitive (HPC/RT) workloads.
+
security= [SECURITY] Choose a security module to enable at boot.
If this boot parameter is not specified, only the first
security module asking for security registration will be
(i.e. 7xxx/5xxx SoCs), SPEAr (arm), Loongson1B (mips) and XLINX XC2V3000
FF1152AMT0221 D1215994A VIRTEX FPGA board.
-DWC Ether MAC 10/100/1000 Universal version 3.60a (and older) and DWC Ether MAC 10/100
-Universal version 4.0 have been used for developing this driver.
+DWC Ether MAC 10/100/1000 Universal version 3.60a (and older) and DWC Ether
+MAC 10/100 Universal version 4.0 have been used for developing this driver.
This driver supports both the platform bus and PCI.
When one or more packets are received, an interrupt happens. The interrupts
are not queued so the driver has to scan all the descriptors in the ring during
the receive process.
-This is based on NAPI so the interrupt handler signals only if there is work to be
-done, and it exits.
+This is based on NAPI so the interrupt handler signals only if there is work
+to be done, and it exits.
Then the poll method will be scheduled at some future point.
The incoming packets are stored, by the DMA, in a list of pre-allocated socket
buffers in order to avoid the memcpy (Zero-copy).
4.3) Timer-Driver Interrupt
-Instead of having the device that asynchronously notifies the frame receptions, the
-driver configures a timer to generate an interrupt at regular intervals.
-Based on the granularity of the timer, the frames that are received by the device
-will experience different levels of latency. Some NICs have dedicated timer
-device to perform this task. STMMAC can use either the RTC device or the TMU
-channel 2 on STLinux platforms.
+Instead of having the device that asynchronously notifies the frame receptions,
+the driver configures a timer to generate an interrupt at regular intervals.
+Based on the granularity of the timer, the frames that are received by the
+device will experience different levels of latency. Some NICs have dedicated
+timer device to perform this task. STMMAC can use either the RTC device or the
+TMU channel 2 on STLinux platforms.
The timers frequency can be passed to the driver as parameter; when change it,
take care of both hardware capability and network stability/performance impact.
-Several performance tests on STM platforms showed this optimisation allows to spare
-the CPU while having the maximum throughput.
+Several performance tests on STM platforms showed this optimisation allows to
+spare the CPU while having the maximum throughput.
4.4) WOL
-Wake up on Lan feature through Magic and Unicast frames are supported for the GMAC
-core.
+Wake up on Lan feature through Magic and Unicast frames are supported for the
+GMAC core.
4.5) DMA descriptors
Driver handles both normal and enhanced descriptors. The latter has been only
These are included in the include/linux/stmmac.h header file
and detailed below as well:
- struct plat_stmmacenet_data {
+struct plat_stmmacenet_data {
+ char *phy_bus_name;
int bus_id;
int phy_addr;
int interface;
void (*bus_setup)(void __iomem *ioaddr);
int (*init)(struct platform_device *pdev);
void (*exit)(struct platform_device *pdev);
+ void *custom_cfg;
+ void *custom_data;
void *bsp_priv;
};
Where:
+ o phy_bus_name: phy bus name to attach to the stmmac.
o bus_id: bus identifier.
o phy_addr: the physical address can be passed from the platform.
If it is set to -1 the driver will automatically
detect it at run-time by probing all the 32 addresses.
o interface: PHY device's interface.
o mdio_bus_data: specific platform fields for the MDIO bus.
- o pbl: the Programmable Burst Length is maximum number of beats to
+ o dma_cfg: internal DMA parameters
+ o pbl: the Programmable Burst Length is maximum number of beats to
be transferred in one DMA transaction.
GMAC also enables the 4xPBL by default.
+ o fixed_burst/mixed_burst/burst_len
o clk_csr: fixed CSR Clock range selection.
o has_gmac: uses the GMAC core.
o enh_desc: if sets the MAC will use the enhanced descriptor structure.
this is sometime necessary on some platforms (e.g. ST boxes)
where the HW needs to have set some PIO lines or system cfg
registers.
- o custom_cfg: this is a custom configuration that can be passed while
- initialising the resources.
+ o custom_cfg/custom_data: this is a custom configuration that can be passed
+ while initialising the resources.
+ o bsp_priv: another private poiter.
For MDIO bus The we have:
o irqs: list of IRQs, one per PHY.
o probed_phy_irq: if irqs is NULL, use this for probed PHY.
-
For DMA engine we have the following internal fields that should be
tuned according to the HW capabilities.
--- /dev/null
+The execve system call can grant a newly-started program privileges that
+its parent did not have. The most obvious examples are setuid/setgid
+programs and file capabilities. To prevent the parent program from
+gaining these privileges as well, the kernel and user code must be
+careful to prevent the parent from doing anything that could subvert the
+child. For example:
+
+ - The dynamic loader handles LD_* environment variables differently if
+ a program is setuid.
+
+ - chroot is disallowed to unprivileged processes, since it would allow
+ /etc/passwd to be replaced from the point of view of a process that
+ inherited chroot.
+
+ - The exec code has special handling for ptrace.
+
+These are all ad-hoc fixes. The no_new_privs bit (since Linux 3.5) is a
+new, generic mechanism to make it safe for a process to modify its
+execution environment in a manner that persists across execve. Any task
+can set no_new_privs. Once the bit is set, it is inherited across fork,
+clone, and execve and cannot be unset. With no_new_privs set, execve
+promises not to grant the privilege to do anything that could not have
+been done without the execve call. For example, the setuid and setgid
+bits will no longer change the uid or gid; file capabilities will not
+add to the permitted set, and LSMs will not relax constraints after
+execve.
+
+To set no_new_privs, use prctl(PR_SET_NO_NEW_PRIVS, 1, 0, 0, 0).
+
+Be careful, though: LSMs might also not tighten constraints on exec
+in no_new_privs mode. (This means that setting up a general-purpose
+service launcher to set no_new_privs before execing daemons may
+interfere with LSM-based sandboxing.)
+
+Note that no_new_privs does not prevent privilege changes that do not
+involve execve. An appropriately privileged task can still call
+setuid(2) and receive SCM_RIGHTS datagrams.
+
+There are two main use cases for no_new_privs so far:
+
+ - Filters installed for the seccomp mode 2 sandbox persist across
+ execve and can change the behavior of newly-executed programs.
+ Unprivileged users are therefore only allowed to install such filters
+ if no_new_privs is set.
+
+ - By itself, no_new_privs can be used to reduce the attack surface
+ available to an unprivileged user. If everything running with a
+ given uid has no_new_privs set, then that uid will be unable to
+ escalate its privileges by directly attacking setuid, setgid, and
+ fcap-using binaries; it will need to compromise something without the
+ no_new_privs bit set first.
+
+In the future, other potentially dangerous kernel features could become
+available to unprivileged tasks if no_new_privs is set. In principle,
+several options to unshare(2) and clone(2) would be safe when
+no_new_privs is set, and no_new_privs + chroot is considerable less
+dangerous than chroot by itself.
marked CONFIG_BROKEN), an oops, a hang, data corruption, a real
security issue, or some "oh, that's not good" issue. In short, something
critical.
+ - Serious issues as reported by a user of a distribution kernel may also
+ be considered if they fix a notable performance or interactivity issue.
+ As these fixes are not as obvious and have a higher risk of a subtle
+ regression they should only be submitted by a distribution kernel
+ maintainer and include an addendum linking to a bugzilla entry if it
+ exists and additional information on the user-visible impact.
- New device IDs and quirks are also accepted.
- No "theoretical race condition" issues, unless an explanation of how the
race can be exploited is also provided.
1.1 thermal zone device interface
1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *name,
- int trips, void *devdata, struct thermal_zone_device_ops *ops)
+ int trips, int mask, void *devdata,
+ struct thermal_zone_device_ops *ops)
This interface function adds a new thermal zone device (sensor) to
/sys/class/thermal folder as thermal_zone[0-*]. It tries to bind all the
name: the thermal zone name.
trips: the total number of trip points this thermal zone supports.
+ mask: Bit string: If 'n'th bit is set, then trip point 'n' is writeable.
devdata: device private data
ops: thermal zone device call-backs.
.bind: bind the thermal zone device with a thermal cooling device.
.unbind: unbind the thermal zone device with a thermal cooling device.
.get_temp: get the current temperature of the thermal zone.
- .get_mode: get the current mode (user/kernel) of the thermal zone.
- - "kernel" means thermal management is done in kernel.
- - "user" will prevent kernel thermal driver actions upon trip points
+ .get_mode: get the current mode (enabled/disabled) of the thermal zone.
+ - "enabled" means the kernel thermal management is enabled.
+ - "disabled" will prevent kernel thermal driver action upon trip points
so that user applications can take charge of thermal management.
- .set_mode: set the mode (user/kernel) of the thermal zone.
+ .set_mode: set the mode (enabled/disabled) of the thermal zone.
.get_trip_type: get the type of certain trip point.
.get_trip_temp: get the temperature above which the certain trip point
will be fired.
|---mode: Working mode of the thermal zone
|---trip_point_[0-*]_temp: Trip point temperature
|---trip_point_[0-*]_type: Trip point type
+ |---trip_point_[0-*]_hyst: Hysteresis value for this trip point
Thermal cooling device sys I/F, created once it's registered:
/sys/class/thermal/cooling_device[0-*]:
RO, Required
mode
- One of the predefined values in [kernel, user].
+ One of the predefined values in [enabled, disabled].
This file gives information about the algorithm that is currently
managing the thermal zone. It can be either default kernel based
algorithm or user space application.
- kernel = Thermal management in kernel thermal zone driver.
- user = Preventing kernel thermal zone driver actions upon
- trip points so that user application can take full
- charge of the thermal management.
+ enabled = enable Kernel Thermal management.
+ disabled = Preventing kernel thermal zone driver actions upon
+ trip points so that user application can take full
+ charge of the thermal management.
RW, Optional
trip_point_[0-*]_temp
thermal zone.
RO, Optional
+trip_point_[0-*]_hyst
+ The hysteresis value for a trip point, represented as an integer
+ Unit: Celsius
+ RW, Optional
+
cdev[0-*]
Sysfs link to the thermal cooling device node where the sys I/F
for cooling device throttling control represents.
|thermal_zone1:
|---type: acpitz
|---temp: 37000
- |---mode: kernel
+ |---mode: enabled
|---trip_point_0_temp: 100000
|---trip_point_0_type: critical
|---trip_point_1_temp: 80000
PTE's RPN field (ie, it needs to be shifted left by 12 to OR it
into the hash PTE second double word).
+4.75 KVM_IRQFD
+
+Capability: KVM_CAP_IRQFD
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_irqfd (in)
+Returns: 0 on success, -1 on error
+
+Allows setting an eventfd to directly trigger a guest interrupt.
+kvm_irqfd.fd specifies the file descriptor to use as the eventfd and
+kvm_irqfd.gsi specifies the irqchip pin toggled by this event. When
+an event is tiggered on the eventfd, an interrupt is injected into
+the guest using the specified gsi pin. The irqfd is removed using
+the KVM_IRQFD_FLAG_DEASSIGN flag, specifying both kvm_irqfd.fd
+and kvm_irqfd.gsi.
+
+
5. The kvm_run structure
------------------------
--- /dev/null
+Frontswap provides a "transcendent memory" interface for swap pages.
+In some environments, dramatic performance savings may be obtained because
+swapped pages are saved in RAM (or a RAM-like device) instead of a swap disk.
+
+(Note, frontswap -- and cleancache (merged at 3.0) -- are the "frontends"
+and the only necessary changes to the core kernel for transcendent memory;
+all other supporting code -- the "backends" -- is implemented as drivers.
+See the LWN.net article "Transcendent memory in a nutshell" for a detailed
+overview of frontswap and related kernel parts:
+https://lwn.net/Articles/454795/ )
+
+Frontswap is so named because it can be thought of as the opposite of
+a "backing" store for a swap device. The storage is assumed to be
+a synchronous concurrency-safe page-oriented "pseudo-RAM device" conforming
+to the requirements of transcendent memory (such as Xen's "tmem", or
+in-kernel compressed memory, aka "zcache", or future RAM-like devices);
+this pseudo-RAM device is not directly accessible or addressable by the
+kernel and is of unknown and possibly time-varying size. The driver
+links itself to frontswap by calling frontswap_register_ops to set the
+frontswap_ops funcs appropriately and the functions it provides must
+conform to certain policies as follows:
+
+An "init" prepares the device to receive frontswap pages associated
+with the specified swap device number (aka "type"). A "store" will
+copy the page to transcendent memory and associate it with the type and
+offset associated with the page. A "load" will copy the page, if found,
+from transcendent memory into kernel memory, but will NOT remove the page
+from from transcendent memory. An "invalidate_page" will remove the page
+from transcendent memory and an "invalidate_area" will remove ALL pages
+associated with the swap type (e.g., like swapoff) and notify the "device"
+to refuse further stores with that swap type.
+
+Once a page is successfully stored, a matching load on the page will normally
+succeed. So when the kernel finds itself in a situation where it needs
+to swap out a page, it first attempts to use frontswap. If the store returns
+success, the data has been successfully saved to transcendent memory and
+a disk write and, if the data is later read back, a disk read are avoided.
+If a store returns failure, transcendent memory has rejected the data, and the
+page can be written to swap as usual.
+
+If a backend chooses, frontswap can be configured as a "writethrough
+cache" by calling frontswap_writethrough(). In this mode, the reduction
+in swap device writes is lost (and also a non-trivial performance advantage)
+in order to allow the backend to arbitrarily "reclaim" space used to
+store frontswap pages to more completely manage its memory usage.
+
+Note that if a page is stored and the page already exists in transcendent memory
+(a "duplicate" store), either the store succeeds and the data is overwritten,
+or the store fails AND the page is invalidated. This ensures stale data may
+never be obtained from frontswap.
+
+If properly configured, monitoring of frontswap is done via debugfs in
+the /sys/kernel/debug/frontswap directory. The effectiveness of
+frontswap can be measured (across all swap devices) with:
+
+failed_stores - how many store attempts have failed
+loads - how many loads were attempted (all should succeed)
+succ_stores - how many store attempts have succeeded
+invalidates - how many invalidates were attempted
+
+A backend implementation may provide additional metrics.
+
+FAQ
+
+1) Where's the value?
+
+When a workload starts swapping, performance falls through the floor.
+Frontswap significantly increases performance in many such workloads by
+providing a clean, dynamic interface to read and write swap pages to
+"transcendent memory" that is otherwise not directly addressable to the kernel.
+This interface is ideal when data is transformed to a different form
+and size (such as with compression) or secretly moved (as might be
+useful for write-balancing for some RAM-like devices). Swap pages (and
+evicted page-cache pages) are a great use for this kind of slower-than-RAM-
+but-much-faster-than-disk "pseudo-RAM device" and the frontswap (and
+cleancache) interface to transcendent memory provides a nice way to read
+and write -- and indirectly "name" -- the pages.
+
+Frontswap -- and cleancache -- with a fairly small impact on the kernel,
+provides a huge amount of flexibility for more dynamic, flexible RAM
+utilization in various system configurations:
+
+In the single kernel case, aka "zcache", pages are compressed and
+stored in local memory, thus increasing the total anonymous pages
+that can be safely kept in RAM. Zcache essentially trades off CPU
+cycles used in compression/decompression for better memory utilization.
+Benchmarks have shown little or no impact when memory pressure is
+low while providing a significant performance improvement (25%+)
+on some workloads under high memory pressure.
+
+"RAMster" builds on zcache by adding "peer-to-peer" transcendent memory
+support for clustered systems. Frontswap pages are locally compressed
+as in zcache, but then "remotified" to another system's RAM. This
+allows RAM to be dynamically load-balanced back-and-forth as needed,
+i.e. when system A is overcommitted, it can swap to system B, and
+vice versa. RAMster can also be configured as a memory server so
+many servers in a cluster can swap, dynamically as needed, to a single
+server configured with a large amount of RAM... without pre-configuring
+how much of the RAM is available for each of the clients!
+
+In the virtual case, the whole point of virtualization is to statistically
+multiplex physical resources acrosst the varying demands of multiple
+virtual machines. This is really hard to do with RAM and efforts to do
+it well with no kernel changes have essentially failed (except in some
+well-publicized special-case workloads).
+Specifically, the Xen Transcendent Memory backend allows otherwise
+"fallow" hypervisor-owned RAM to not only be "time-shared" between multiple
+virtual machines, but the pages can be compressed and deduplicated to
+optimize RAM utilization. And when guest OS's are induced to surrender
+underutilized RAM (e.g. with "selfballooning"), sudden unexpected
+memory pressure may result in swapping; frontswap allows those pages
+to be swapped to and from hypervisor RAM (if overall host system memory
+conditions allow), thus mitigating the potentially awful performance impact
+of unplanned swapping.
+
+A KVM implementation is underway and has been RFC'ed to lkml. And,
+using frontswap, investigation is also underway on the use of NVM as
+a memory extension technology.
+
+2) Sure there may be performance advantages in some situations, but
+ what's the space/time overhead of frontswap?
+
+If CONFIG_FRONTSWAP is disabled, every frontswap hook compiles into
+nothingness and the only overhead is a few extra bytes per swapon'ed
+swap device. If CONFIG_FRONTSWAP is enabled but no frontswap "backend"
+registers, there is one extra global variable compared to zero for
+every swap page read or written. If CONFIG_FRONTSWAP is enabled
+AND a frontswap backend registers AND the backend fails every "store"
+request (i.e. provides no memory despite claiming it might),
+CPU overhead is still negligible -- and since every frontswap fail
+precedes a swap page write-to-disk, the system is highly likely
+to be I/O bound and using a small fraction of a percent of a CPU
+will be irrelevant anyway.
+
+As for space, if CONFIG_FRONTSWAP is enabled AND a frontswap backend
+registers, one bit is allocated for every swap page for every swap
+device that is swapon'd. This is added to the EIGHT bits (which
+was sixteen until about 2.6.34) that the kernel already allocates
+for every swap page for every swap device that is swapon'd. (Hugh
+Dickins has observed that frontswap could probably steal one of
+the existing eight bits, but let's worry about that minor optimization
+later.) For very large swap disks (which are rare) on a standard
+4K pagesize, this is 1MB per 32GB swap.
+
+When swap pages are stored in transcendent memory instead of written
+out to disk, there is a side effect that this may create more memory
+pressure that can potentially outweigh the other advantages. A
+backend, such as zcache, must implement policies to carefully (but
+dynamically) manage memory limits to ensure this doesn't happen.
+
+3) OK, how about a quick overview of what this frontswap patch does
+ in terms that a kernel hacker can grok?
+
+Let's assume that a frontswap "backend" has registered during
+kernel initialization; this registration indicates that this
+frontswap backend has access to some "memory" that is not directly
+accessible by the kernel. Exactly how much memory it provides is
+entirely dynamic and random.
+
+Whenever a swap-device is swapon'd frontswap_init() is called,
+passing the swap device number (aka "type") as a parameter.
+This notifies frontswap to expect attempts to "store" swap pages
+associated with that number.
+
+Whenever the swap subsystem is readying a page to write to a swap
+device (c.f swap_writepage()), frontswap_store is called. Frontswap
+consults with the frontswap backend and if the backend says it does NOT
+have room, frontswap_store returns -1 and the kernel swaps the page
+to the swap device as normal. Note that the response from the frontswap
+backend is unpredictable to the kernel; it may choose to never accept a
+page, it could accept every ninth page, or it might accept every
+page. But if the backend does accept a page, the data from the page
+has already been copied and associated with the type and offset,
+and the backend guarantees the persistence of the data. In this case,
+frontswap sets a bit in the "frontswap_map" for the swap device
+corresponding to the page offset on the swap device to which it would
+otherwise have written the data.
+
+When the swap subsystem needs to swap-in a page (swap_readpage()),
+it first calls frontswap_load() which checks the frontswap_map to
+see if the page was earlier accepted by the frontswap backend. If
+it was, the page of data is filled from the frontswap backend and
+the swap-in is complete. If not, the normal swap-in code is
+executed to obtain the page of data from the real swap device.
+
+So every time the frontswap backend accepts a page, a swap device read
+and (potentially) a swap device write are replaced by a "frontswap backend
+store" and (possibly) a "frontswap backend loads", which are presumably much
+faster.
+
+4) Can't frontswap be configured as a "special" swap device that is
+ just higher priority than any real swap device (e.g. like zswap,
+ or maybe swap-over-nbd/NFS)?
+
+No. First, the existing swap subsystem doesn't allow for any kind of
+swap hierarchy. Perhaps it could be rewritten to accomodate a hierarchy,
+but this would require fairly drastic changes. Even if it were
+rewritten, the existing swap subsystem uses the block I/O layer which
+assumes a swap device is fixed size and any page in it is linearly
+addressable. Frontswap barely touches the existing swap subsystem,
+and works around the constraints of the block I/O subsystem to provide
+a great deal of flexibility and dynamicity.
+
+For example, the acceptance of any swap page by the frontswap backend is
+entirely unpredictable. This is critical to the definition of frontswap
+backends because it grants completely dynamic discretion to the
+backend. In zcache, one cannot know a priori how compressible a page is.
+"Poorly" compressible pages can be rejected, and "poorly" can itself be
+defined dynamically depending on current memory constraints.
+
+Further, frontswap is entirely synchronous whereas a real swap
+device is, by definition, asynchronous and uses block I/O. The
+block I/O layer is not only unnecessary, but may perform "optimizations"
+that are inappropriate for a RAM-oriented device including delaying
+the write of some pages for a significant amount of time. Synchrony is
+required to ensure the dynamicity of the backend and to avoid thorny race
+conditions that would unnecessarily and greatly complicate frontswap
+and/or the block I/O subsystem. That said, only the initial "store"
+and "load" operations need be synchronous. A separate asynchronous thread
+is free to manipulate the pages stored by frontswap. For example,
+the "remotification" thread in RAMster uses standard asynchronous
+kernel sockets to move compressed frontswap pages to a remote machine.
+Similarly, a KVM guest-side implementation could do in-guest compression
+and use "batched" hypercalls.
+
+In a virtualized environment, the dynamicity allows the hypervisor
+(or host OS) to do "intelligent overcommit". For example, it can
+choose to accept pages only until host-swapping might be imminent,
+then force guests to do their own swapping.
+
+There is a downside to the transcendent memory specifications for
+frontswap: Since any "store" might fail, there must always be a real
+slot on a real swap device to swap the page. Thus frontswap must be
+implemented as a "shadow" to every swapon'd device with the potential
+capability of holding every page that the swap device might have held
+and the possibility that it might hold no pages at all. This means
+that frontswap cannot contain more pages than the total of swapon'd
+swap devices. For example, if NO swap device is configured on some
+installation, frontswap is useless. Swapless portable devices
+can still use frontswap but a backend for such devices must configure
+some kind of "ghost" swap device and ensure that it is never used.
+
+5) Why this weird definition about "duplicate stores"? If a page
+ has been previously successfully stored, can't it always be
+ successfully overwritten?
+
+Nearly always it can, but no, sometimes it cannot. Consider an example
+where data is compressed and the original 4K page has been compressed
+to 1K. Now an attempt is made to overwrite the page with data that
+is non-compressible and so would take the entire 4K. But the backend
+has no more space. In this case, the store must be rejected. Whenever
+frontswap rejects a store that would overwrite, it also must invalidate
+the old data and ensure that it is no longer accessible. Since the
+swap subsystem then writes the new data to the read swap device,
+this is the correct course of action to ensure coherency.
+
+6) What is frontswap_shrink for?
+
+When the (non-frontswap) swap subsystem swaps out a page to a real
+swap device, that page is only taking up low-value pre-allocated disk
+space. But if frontswap has placed a page in transcendent memory, that
+page may be taking up valuable real estate. The frontswap_shrink
+routine allows code outside of the swap subsystem to force pages out
+of the memory managed by frontswap and back into kernel-addressable memory.
+For example, in RAMster, a "suction driver" thread will attempt
+to "repatriate" pages sent to a remote machine back to the local machine;
+this is driven using the frontswap_shrink mechanism when memory pressure
+subsides.
+
+7) Why does the frontswap patch create the new include file swapfile.h?
+
+The frontswap code depends on some swap-subsystem-internal data
+structures that have, over the years, moved back and forth between
+static and global. This seemed a reasonable compromise: Define
+them as global but declare them in a new include file that isn't
+included by the large number of source files that include swap.h.
+
+Dan Magenheimer, last updated April 9, 2012
S: Supported
F: drivers/acpi/fan.c
-ACPI PROCESSOR AGGREGATOR DRIVER
-M: Shaohua Li <shaohua.li@intel.com>
-L: linux-acpi@vger.kernel.org
-W: http://www.lesswatts.org/projects/acpi/
-S: Supported
-F: drivers/acpi/acpi_pad.c
-
ACPI THERMAL DRIVER
M: Zhang Rui <rui.zhang@intel.com>
L: linux-acpi@vger.kernel.org
F: net/appletalk/
ARASAN COMPACT FLASH PATA CONTROLLER
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
L: linux-ide@vger.kernel.org
S: Maintained
F: include/linux/pata_arasan_cf_data.h
ARM/SAMSUNG S5P SERIES Multi Format Codec (MFC) SUPPORT
M: Kyungmin Park <kyungmin.park@samsung.com>
M: Kamil Debski <k.debski@samsung.com>
-M: Jeongtae Park <jtp.park@samsung.com>
+M: Jeongtae Park <jtp.park@samsung.com>
L: linux-arm-kernel@lists.infradead.org
L: linux-media@vger.kernel.org
S: Maintained
F: drivers/gpio/gpio-bt8xx.c
BTRFS FILE SYSTEM
-M: Chris Mason <chris.mason@oracle.com>
+M: Chris Mason <chris.mason@fusionio.com>
L: linux-btrfs@vger.kernel.org
W: http://btrfs.wiki.kernel.org/
Q: http://patchwork.kernel.org/project/linux-btrfs/list/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs.git
S: Maintained
F: Documentation/filesystems/btrfs.txt
F: fs/btrfs/
CAPABILITIES
M: Serge Hallyn <serge.hallyn@canonical.com>
L: linux-security-module@vger.kernel.org
-S: Supported
+S: Supported
F: include/linux/capability.h
F: security/capability.c
-F: security/commoncap.c
+F: security/commoncap.c
F: kernel/capability.c
CELL BROADBAND ENGINE ARCHITECTURE
CFG80211 and NL80211
M: Johannes Berg <johannes@sipsolutions.net>
L: linux-wireless@vger.kernel.org
+W: http://wireless.kernel.org/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
S: Maintained
F: include/linux/nl80211.h
F: include/net/cfg80211.h
F: drivers/net/wan/pc300*
CYTTSP TOUCHSCREEN DRIVER
-M: Javier Martinez Canillas <javier@dowhile0.org>
-L: linux-input@vger.kernel.org
-S: Maintained
-F: drivers/input/touchscreen/cyttsp*
-F: include/linux/input/cyttsp.h
+M: Javier Martinez Canillas <javier@dowhile0.org>
+L: linux-input@vger.kernel.org
+S: Maintained
+F: drivers/input/touchscreen/cyttsp*
+F: include/linux/input/cyttsp.h
DAMA SLAVE for AX.25
M: Joerg Reuter <jreuter@yaina.de>
F: include/linux/dm-*.h
DIOLAN U2C-12 I2C DRIVER
-M: Guenter Roeck <guenter.roeck@ericsson.com>
+M: Guenter Roeck <linux@roeck-us.net>
L: linux-i2c@vger.kernel.org
S: Maintained
F: drivers/i2c/busses/i2c-diolan-u2c.c
F: include/linux/freezer.h
F: kernel/freezer.c
+FRONTSWAP API
+M: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+L: linux-kernel@vger.kernel.org
+S: Maintained
+F: mm/frontswap.c
+F: include/linux/frontswap.h
+
FS-CACHE: LOCAL CACHING FOR NETWORK FILESYSTEMS
M: David Howells <dhowells@redhat.com>
L: linux-cachefs@redhat.com
HARDWARE MONITORING
M: Jean Delvare <khali@linux-fr.org>
-M: Guenter Roeck <guenter.roeck@ericsson.com>
+M: Guenter Roeck <linux@roeck-us.net>
L: lm-sensors@lm-sensors.org
W: http://www.lm-sensors.org/
T: quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-hwmon/
F: drivers/idle/i7300_idle.c
IEEE 802.15.4 SUBSYSTEM
+M: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
M: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
-M: Sergey Lapin <slapin@ossfans.org>
L: linux-zigbee-devel@lists.sourceforge.net (moderated for non-subscribers)
W: http://apps.sourceforge.net/trac/linux-zigbee
T: git git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan.git
S: Maintained
F: net/ieee802154/
+F: net/mac802154/
F: drivers/ieee802154/
IIO SUBSYSTEM AND DRIVERS
LED SUBSYSTEM
M: Bryan Wu <bryan.wu@canonical.com>
M: Richard Purdie <rpurdie@rpsys.net>
+L: linux-leds@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds.git
S: Maintained
F: drivers/leds/
F: include/linux/leds.h
M: Johannes Berg <johannes@sipsolutions.net>
L: linux-wireless@vger.kernel.org
W: http://linuxwireless.org/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
S: Maintained
F: Documentation/networking/mac80211-injection.txt
F: include/net/mac80211.h
M: Mattias Nissler <mattias.nissler@gmx.de>
L: linux-wireless@vger.kernel.org
W: http://linuxwireless.org/en/developers/Documentation/mac80211/RateControl/PID
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
S: Maintained
F: net/mac80211/rc80211_pid*
F: drivers/video/matrox/matroxfb_*
F: include/linux/matroxfb.h
+MAX16065 HARDWARE MONITOR DRIVER
+M: Guenter Roeck <linux@roeck-us.net>
+L: lm-sensors@lm-sensors.org
+S: Maintained
+F: Documentation/hwmon/max16065
+F: drivers/hwmon/max16065.c
+
MAX6650 HARDWARE MONITOR AND FAN CONTROLLER DRIVER
M: "Hans J. Koch" <hjk@hansjkoch.de>
L: lm-sensors@lm-sensors.org
L: coreteam@netfilter.org
W: http://www.netfilter.org/
W: http://www.iptables.org/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-2.6.git
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next-2.6.git
+T: git git://1984.lsi.us.es/nf
+T: git git://1984.lsi.us.es/nf-next
S: Supported
F: include/linux/netfilter*
F: include/linux/netfilter/
L: linux-omap@vger.kernel.org
S: Maintained
F: arch/arm/*omap*/*pm*
+F: drivers/cpufreq/omap-cpufreq.c
OMAP POWERDOMAIN/CLOCKDOMAIN SOC ADAPTATION LAYER SUPPORT
M: Rajendra Nayak <rnayak@ti.com>
F: include/linux/leds-pca9532.h
PCA9541 I2C BUS MASTER SELECTOR DRIVER
-M: Guenter Roeck <guenter.roeck@ericsson.com>
+M: Guenter Roeck <linux@roeck-us.net>
L: linux-i2c@vger.kernel.org
S: Maintained
F: drivers/i2c/muxes/i2c-mux-pca9541.c
F: drivers/firmware/pcdp.*
PCI ERROR RECOVERY
-M: Linas Vepstas <linasvepstas@gmail.com>
+M: Linas Vepstas <linasvepstas@gmail.com>
L: linux-pci@vger.kernel.org
S: Supported
F: Documentation/PCI/pci-error-recovery.txt
F: drivers/pinctrl/
PIN CONTROLLER - ST SPEAR
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
F: drivers/rtc/rtc-puv3.c
PMBUS HARDWARE MONITORING DRIVERS
-M: Guenter Roeck <guenter.roeck@ericsson.com>
+M: Guenter Roeck <linux@roeck-us.net>
L: lm-sensors@lm-sensors.org
W: http://www.lm-sensors.org/
W: http://www.roeck-us.net/linux/drivers/
F: drivers/net/ethernet/qlogic/qla3xxx.*
QLOGIC QLCNIC (1/10)Gb ETHERNET DRIVER
-M: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
+M: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
M: Sony Chacko <sony.chacko@qlogic.com>
M: linux-driver@qlogic.com
L: netdev@vger.kernel.org
F: drivers/net/ethernet/qlogic/qlcnic/
QLOGIC QLGE 10Gb ETHERNET DRIVER
-M: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
M: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
M: Ron Mercer <ron.mercer@qlogic.com>
M: linux-driver@qlogic.com
RFKILL
M: Johannes Berg <johannes@sipsolutions.net>
L: linux-wireless@vger.kernel.org
+W: http://wireless.kernel.org/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
S: Maintained
F: Documentation/rfkill.txt
F: net/rfkill/
F: drivers/tty/serial
SYNOPSYS DESIGNWARE DMAC DRIVER
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
S: Maintained
F: include/linux/dw_dmac.h
F: drivers/dma/dw_dmac_regs.h
M: Peter Zijlstra <peterz@infradead.org>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git sched/core
S: Maintained
-F: kernel/sched*
+F: kernel/sched/
F: include/linux/sched.h
SCORE ARCHITECTURE
F: drivers/mmc/host/sdhci-s3c.c
SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) ST SPEAR DRIVER
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
L: spear-devel@list.st.com
L: linux-mmc@vger.kernel.org
S: Maintained
F: include/linux/compiler.h
SPEAR PLATFORM SUPPORT
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
M: Shiraz Hashim <shiraz.hashim@st.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
F: arch/arm/plat-spear/
SPEAR13XX MACHINE SUPPORT
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
M: Shiraz Hashim <shiraz.hashim@st.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
F: arch/arm/mach-spear13xx/
SPEAR3XX MACHINE SUPPORT
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
M: Shiraz Hashim <shiraz.hashim@st.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
SPEAR6XX MACHINE SUPPORT
M: Rajeev Kumar <rajeev-dlh.kumar@st.com>
M: Shiraz Hashim <shiraz.hashim@st.com>
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
F: arch/arm/mach-spear6xx/
SPEAR CLOCK FRAMEWORK SUPPORT
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
F: drivers/uio/
F: include/linux/uio*.h
-UTIL-LINUX-NG PACKAGE
+UTIL-LINUX PACKAGE
M: Karel Zak <kzak@redhat.com>
-L: util-linux-ng@vger.kernel.org
-W: http://kernel.org/~kzak/util-linux-ng/
-T: git git://git.kernel.org/pub/scm/utils/util-linux-ng/util-linux-ng.git
+L: util-linux@vger.kernel.org
+W: http://en.wikipedia.org/wiki/Util-linux
+T: git git://git.kernel.org/pub/scm/utils/util-linux/util-linux.git
S: Maintained
UVESAFB DRIVER
VME SUBSYSTEM
M: Martyn Welch <martyn.welch@ge.com>
-M: Manohar Vanga <manohar.vanga@cern.ch>
+M: Manohar Vanga <manohar.vanga@gmail.com>
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
L: devel@driverdev.osuosl.org
S: Maintained
VERSION = 3
PATCHLEVEL = 5
SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION =
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*
KBUILD_CFLAGS += -O2
endif
+include $(srctree)/arch/$(SRCARCH)/Makefile
+
ifdef CONFIG_READABLE_ASM
# Disable optimizations that make assembler listings hard to read.
# reorder blocks reorders the control in the function
$(call cc-option,-fno-partial-inlining)
endif
-include $(srctree)/arch/$(SRCARCH)/Makefile
-
ifneq ($(CONFIG_FRAME_WARN),0)
KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
endif
select HAVE_IDE if PCI || ISA || PCMCIA
select HAVE_DMA_ATTRS
select HAVE_DMA_CONTIGUOUS if (CPU_V6 || CPU_V6K || CPU_V7)
- select CMA if (CPU_V6 || CPU_V6K || CPU_V7)
select HAVE_MEMBLOCK
select RTC_LIB
select SYS_SUPPORTS_APM_EMULATION
select ICST
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
+ select NEED_MACH_IO_H if PCI
select PLAT_VERSATILE
select PLAT_VERSATILE_CLCD
select PLAT_VERSATILE_FPGA_IRQ
select PCI
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
+ select NEED_MACH_IO_H
select PLAT_ORION
help
Support for the following Marvell Orion 5x series SoCs:
/include/ "mmp2.dtsi"
/ {
- model = "Marvell MMP2 Aspenite Development Board";
+ model = "Marvell MMP2 Brownstone Development Board";
compatible = "mrvl,mmp2-brownstone", "mrvl,mmp2";
chosen {
};
memory {
- reg = <0x00000000 0x04000000>;
+ reg = <0x00000000 0x08000000>;
};
soc {
compatible = "ti,omap2-intc";
interrupt-controller;
#interrupt-cells = <1>;
+ ti,intc-size = <96>;
+ reg = <0x480FE000 0x1000>;
};
uart1: serial@4806a000 {
/*
* DTS file for SPEAr1310 Evaluation Baord
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for all SPEAr1310 SoCs
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for SPEAr1340 Evaluation Baord
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for all SPEAr1340 SoCs
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for all SPEAr13xx SoCs
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
pmu {
compatible = "arm,cortex-a9-pmu";
- interrupts = <0 8 0x04
- 0 9 0x04>;
+ interrupts = <0 6 0x04
+ 0 7 0x04>;
};
L2: l2-cache {
gmac0: eth@e2000000 {
compatible = "st,spear600-gmac";
reg = <0xe2000000 0x8000>;
- interrupts = <0 23 0x4
- 0 24 0x4>;
+ interrupts = <0 33 0x4
+ 0 34 0x4>;
interrupt-names = "macirq", "eth_wake_irq";
status = "disabled";
};
kbd@e0300000 {
compatible = "st,spear300-kbd";
reg = <0xe0300000 0x1000>;
+ interrupts = <0 52 0x4>;
status = "disabled";
};
serial@e0000000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xe0000000 0x1000>;
- interrupts = <0 36 0x4>;
+ interrupts = <0 35 0x4>;
status = "disabled";
};
/*
* DTS file for SPEAr300 Evaluation Baord
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for SPEAr300 SoC
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for SPEAr310 Evaluation Baord
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for SPEAr310 SoC
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for SPEAr320 Evaluation Baord
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/include/ "spear320.dtsi"
/ {
- model = "ST SPEAr300 Evaluation Board";
- compatible = "st,spear300-evb", "st,spear300";
+ model = "ST SPEAr320 Evaluation Board";
+ compatible = "st,spear320-evb", "st,spear320";
#address-cells = <1>;
#size-cells = <1>;
ahb {
pinmux@b3000000 {
- st,pinmux-mode = <3>;
+ st,pinmux-mode = <4>;
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
/*
* DTS file for SPEAr320 SoC
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for all SPEAr3xx SoCs
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
timer@f0000000 {
compatible = "st,spear-timer";
reg = <0xf0000000 0x400>;
+ interrupt-parent = <&vic0>;
interrupts = <16>;
};
};
struct safe_buffer *buf;
unsigned long off;
- dev_dbg(dev, "%s(dma=%#x,off=%#lx,sz=%zx,dir=%x)\n",
- __func__, addr, off, sz, dir);
+ dev_dbg(dev, "%s(dma=%#x,sz=%zx,dir=%x)\n",
+ __func__, addr, sz, dir);
buf = find_safe_buffer_dev(dev, addr, __func__);
if (!buf)
BUG_ON(buf->direction != dir);
- dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
- __func__, buf->ptr, virt_to_dma(dev, buf->ptr),
+ dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x off=%#lx) mapped to %p (dma=%#x)\n",
+ __func__, buf->ptr, virt_to_dma(dev, buf->ptr), off,
buf->safe, buf->safe_dma_addr);
DO_STATS(dev->archdata.dmabounce->bounce_count++);
struct safe_buffer *buf;
unsigned long off;
- dev_dbg(dev, "%s(dma=%#x,off=%#lx,sz=%zx,dir=%x)\n",
- __func__, addr, off, sz, dir);
+ dev_dbg(dev, "%s(dma=%#x,sz=%zx,dir=%x)\n",
+ __func__, addr, sz, dir);
buf = find_safe_buffer_dev(dev, addr, __func__);
if (!buf)
BUG_ON(buf->direction != dir);
- dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
- __func__, buf->ptr, virt_to_dma(dev, buf->ptr),
+ dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x off=%#lx) mapped to %p (dma=%#x)\n",
+ __func__, buf->ptr, virt_to_dma(dev, buf->ptr), off,
buf->safe, buf->safe_dma_addr);
DO_STATS(dev->archdata.dmabounce->bounce_count++);
CONFIG_USB_DEVICEFS=y
CONFIG_USB_SUSPEND=y
CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
CONFIG_USB_WDM=y
CONFIG_USB_STORAGE=y
CONFIG_USB_LIBUSUAL=y
#define ATOMIC64_INIT(i) { (i) }
-static inline u64 atomic64_read(atomic64_t *v)
+static inline u64 atomic64_read(const atomic64_t *v)
{
u64 result;
#ifndef __ASSEMBLY__
#ifdef CONFIG_CPU_USE_DOMAINS
-#define set_domain(x) \
- do { \
- __asm__ __volatile__( \
- "mcr p15, 0, %0, c3, c0 @ set domain" \
- : : "r" (x)); \
- isb(); \
- } while (0)
+static inline void set_domain(unsigned val)
+{
+ asm volatile(
+ "mcr p15, 0, %0, c3, c0 @ set domain"
+ : : "r" (val));
+ isb();
+}
#define modify_domain(dom,type) \
do { \
} while (0)
#else
-#define set_domain(x) do { } while (0)
-#define modify_domain(dom,type) do { } while (0)
+static inline void set_domain(unsigned val) { }
+static inline void modify_domain(unsigned dom, unsigned type) { }
#endif
/*
" .long 1b, 4f, 2b, 4f\n" \
" .popsection\n" \
" .pushsection .fixup,\"ax\"\n" \
+ " .align 2\n" \
"4: mov %0, " err_reg "\n" \
" b 3b\n" \
" .popsection"
* ARM PrimeXsys System Controller SP810 header file
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
#define TIF_NOTIFY_RESUME 2 /* callback before returning to user */
#define TIF_SYSCALL_TRACE 8
#define TIF_SYSCALL_AUDIT 9
-#define TIF_SYSCALL_RESTARTSYS 10
#define TIF_POLLING_NRFLAG 16
#define TIF_USING_IWMMXT 17
#define TIF_MEMDIE 18 /* is terminating due to OOM killer */
#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG)
#define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT)
#define _TIF_SECCOMP (1 << TIF_SECCOMP)
-#define _TIF_SYSCALL_RESTARTSYS (1 << TIF_SYSCALL_RESTARTSYS)
/* Checks for any syscall work in entry-common.S */
-#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \
- _TIF_SYSCALL_RESTARTSYS)
+#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT)
/*
* Change these and you break ASM code in entry-common.S
* The out of line fixup for the ldrt above.
*/
.pushsection .fixup, "ax"
+ .align 2
4: mov pc, r9
.popsection
.pushsection __ex_table,"a"
TEST_BF_R ("mov pc, r",0,2f,"")
TEST_BF_RR("mov pc, r",0,2f,", asl r",1,0,"")
TEST_BB( "sub pc, pc, #1b-2b+8")
-#if __LINUX_ARM_ARCH__ >= 6
- TEST_BB( "sub pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before ARMv6 */
+#if __LINUX_ARM_ARCH__ == 6 && !defined(CONFIG_CPU_V7)
+ TEST_BB( "sub pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before and after ARMv6 */
#endif
TEST_BB_R( "sub pc, pc, r",14, 1f-2f+8,"")
TEST_BB_R( "rsb pc, r",14,1f-2f+8,", pc")
/* LDRSB (literal) 1111 1001 x001 1111 xxxx xxxx xxxx xxxx */
/* LDRH (literal) 1111 1000 x011 1111 xxxx xxxx xxxx xxxx */
/* LDRSH (literal) 1111 1001 x011 1111 xxxx xxxx xxxx xxxx */
- DECODE_EMULATEX (0xfe5f0000, 0xf81f0000, t32_simulate_ldr_literal,
+ DECODE_SIMULATEX(0xfe5f0000, 0xf81f0000, t32_simulate_ldr_literal,
REGS(PC, NOSPPCX, 0, 0, 0)),
/* STRB (immediate) 1111 1000 0000 xxxx xxxx 1xxx xxxx xxxx */
event_requires_mode_exclusion(&event->attr)) {
pr_debug("ARM performance counters do not support "
"mode exclusion\n");
- return -EPERM;
+ return -EOPNOTSUPP;
}
/*
#include <linux/regset.h>
#include <linux/audit.h>
#include <linux/tracehook.h>
-#include <linux/unistd.h>
#include <asm/pgtable.h>
#include <asm/traps.h>
audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0,
regs->ARM_r1, regs->ARM_r2, regs->ARM_r3);
- if (why == 0 && test_and_clear_thread_flag(TIF_SYSCALL_RESTARTSYS))
- scno = __NR_restart_syscall - __NR_SYSCALL_BASE;
if (!test_thread_flag(TIF_SYSCALL_TRACE))
return scno;
*/
#define SWI_SYS_SIGRETURN (0xef000000|(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE))
#define SWI_SYS_RT_SIGRETURN (0xef000000|(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE))
+#define SWI_SYS_RESTART (0xef000000|__NR_restart_syscall|__NR_OABI_SYSCALL_BASE)
/*
* With EABI, the syscall number has to be loaded into r7.
MOV_R7_NR_RT_SIGRETURN, SWI_SYS_RT_SIGRETURN, SWI_THUMB_RT_SIGRETURN,
};
+/*
+ * Either we support OABI only, or we have EABI with the OABI
+ * compat layer enabled. In the later case we don't know if
+ * user space is EABI or not, and if not we must not clobber r7.
+ * Always using the OABI syscall solves that issue and works for
+ * all those cases.
+ */
+const unsigned long syscall_restart_code[2] = {
+ SWI_SYS_RESTART, /* swi __NR_restart_syscall */
+ 0xe49df004, /* ldr pc, [sp], #4 */
+};
+
/*
* atomically swap in the new signal mask, and wait for a signal.
*/
case -ERESTARTNOHAND:
case -ERESTARTSYS:
case -ERESTARTNOINTR:
- case -ERESTART_RESTARTBLOCK:
regs->ARM_r0 = regs->ARM_ORIG_r0;
regs->ARM_pc = restart_addr;
break;
+ case -ERESTART_RESTARTBLOCK:
+ regs->ARM_r0 = -EINTR;
+ break;
}
}
* debugger has chosen to restart at a different PC.
*/
if (regs->ARM_pc == restart_addr) {
- if (retval == -ERESTARTNOHAND ||
- retval == -ERESTART_RESTARTBLOCK
+ if (retval == -ERESTARTNOHAND
|| (retval == -ERESTARTSYS
&& !(ka.sa.sa_flags & SA_RESTART))) {
regs->ARM_r0 = -EINTR;
regs->ARM_pc = continue_addr;
}
- clear_thread_flag(TIF_SYSCALL_RESTARTSYS);
}
handle_signal(signr, &ka, &info, regs);
* ignore the restart.
*/
if (retval == -ERESTART_RESTARTBLOCK
- && regs->ARM_pc == restart_addr)
- set_thread_flag(TIF_SYSCALL_RESTARTSYS);
+ && regs->ARM_pc == continue_addr) {
+ if (thumb_mode(regs)) {
+ regs->ARM_r7 = __NR_restart_syscall - __NR_SYSCALL_BASE;
+ regs->ARM_pc -= 2;
+ } else {
+#if defined(CONFIG_AEABI) && !defined(CONFIG_OABI_COMPAT)
+ regs->ARM_r7 = __NR_restart_syscall;
+ regs->ARM_pc -= 4;
+#else
+ u32 __user *usp;
+
+ regs->ARM_sp -= 4;
+ usp = (u32 __user *)regs->ARM_sp;
+
+ if (put_user(regs->ARM_pc, usp) == 0) {
+ regs->ARM_pc = KERN_RESTART_CODE;
+ } else {
+ regs->ARM_sp += 4;
+ force_sigsegv(0, current);
+ }
+#endif
+ }
+ }
}
restore_saved_sigmask();
* published by the Free Software Foundation.
*/
#define KERN_SIGRETURN_CODE (CONFIG_VECTORS_BASE + 0x00000500)
+#define KERN_RESTART_CODE (KERN_SIGRETURN_CODE + sizeof(sigreturn_codes))
extern const unsigned long sigreturn_codes[7];
+extern const unsigned long syscall_restart_code[2];
*/
memcpy((void *)(vectors + KERN_SIGRETURN_CODE - CONFIG_VECTORS_BASE),
sigreturn_codes, sizeof(sigreturn_codes));
+ memcpy((void *)(vectors + KERN_RESTART_CODE - CONFIG_VECTORS_BASE),
+ syscall_restart_code, sizeof(syscall_restart_code));
flush_icache_range(vectors, vectors + PAGE_SIZE);
modify_domain(DOMAIN_USER, DOMAIN_CLIENT);
}
#endif
+#ifdef CONFIG_SMP
PERCPU_SECTION(L1_CACHE_BYTES)
+#endif
#ifdef CONFIG_XIP_KERNEL
__data_loc = ALIGN(4); /* location in binary */
#define POWER_MANAGEMENT (BRIDGE_VIRT_BASE | 0x011c)
#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300)
#endif
/* North-South Bridge */
#define BRIDGE_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x20000)
+#define BRIDGE_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x20000)
/* Cryptographic Engine */
#define DOVE_CRYPT_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x30000)
select EXYNOS_DEV_SYSMMU
select EXYNOS4_DEV_AHCI
select SAMSUNG_DEV_KEYPAD
- select EXYNOS4_DEV_DMA
+ select EXYNOS_DEV_DMA
select SAMSUNG_DEV_PWM
select EXYNOS4_DEV_USB_OHCI
select EXYNOS4_SETUP_FIMD0
select S5P_DEV_ONENAND
select S5P_DEV_TV
select EXYNOS_DEV_SYSMMU
- select EXYNOS4_DEV_DMA
+ select EXYNOS_DEV_DMA
select EXYNOS_DEV_DRM
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select S5P_DEV_MFC
select S5P_DEV_USB_EHCI
select S5P_SETUP_MIPIPHY
- select EXYNOS4_DEV_DMA
+ select EXYNOS_DEV_DMA
select EXYNOS_DEV_DRM
select EXYNOS4_SETUP_FIMC
select EXYNOS4_SETUP_FIMD0
select SAMSUNG_DEV_PWM
select EXYNOS_DEV_DRM
select EXYNOS_DEV_SYSMMU
- select EXYNOS4_DEV_DMA
+ select EXYNOS_DEV_DMA
select EXYNOS4_DEV_USB_OHCI
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_SDHCI
struct exynos_pm_domain *pd)
{
if (pdev->dev.bus) {
- if (pm_genpd_add_device(&pd->pd, &pdev->dev))
+ if (!pm_genpd_add_device(&pd->pd, &pdev->dev))
+ pm_genpd_dev_need_restore(&pdev->dev, true);
+ else
pr_info("%s: error in adding %s device to %s power"
"domain\n", __func__, dev_name(&pdev->dev),
pd->name);
if (of_have_populated_dt())
return exynos_pm_dt_parse_domains();
- for (idx = 0; idx < ARRAY_SIZE(exynos4_pm_domains); idx++)
- pm_genpd_init(&exynos4_pm_domains[idx]->pd, NULL,
- exynos4_pm_domains[idx]->is_off);
+ for (idx = 0; idx < ARRAY_SIZE(exynos4_pm_domains); idx++) {
+ struct exynos_pm_domain *pd = exynos4_pm_domains[idx];
+ int on = __raw_readl(pd->base + 0x4) & S5P_INT_LOCAL_PWR_EN;
+
+ pm_genpd_init(&pd->pd, NULL, !on);
+ }
#ifdef CONFIG_S5P_DEV_FIMD0
exynos_pm_add_dev_to_genpd(&s5p_device_fimd0, &exynos4_pd_lcd0);
-obj-y := clock.o highbank.o system.o
+obj-y := clock.o highbank.o system.o smc.o
+
+plus_sec := $(call as-instr,.arch_extension sec,+sec)
+AFLAGS_smc.o :=-Wa,-march=armv7-a$(plus_sec)
+
obj-$(CONFIG_DEBUG_HIGHBANK_UART) += lluart.o
obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
static inline void highbank_lluart_map_io(void) {}
#endif
+extern void highbank_smc1(int fn, int arg);
{}
};
+#ifdef CONFIG_CACHE_L2X0
+static void highbank_l2x0_disable(void)
+{
+ /* Disable PL310 L2 Cache controller */
+ highbank_smc1(0x102, 0x0);
+}
+#endif
+
static void __init highbank_init_irq(void)
{
of_irq_init(irq_match);
+
+#ifdef CONFIG_CACHE_L2X0
+ /* Enable PL310 L2 Cache controller */
+ highbank_smc1(0x102, 0x1);
l2x0_of_init(0, ~0UL);
+ outer_cache.disable = highbank_l2x0_disable;
+#endif
}
static void __init highbank_timer_init(void)
--- /dev/null
+/*
+ * Copied from omap44xx-smc.S Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright 2012 Calxeda, Inc.
+ *
+ * This program is free software,you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+
+/*
+ * This is common routine to manage secure monitor API
+ * used to modify the PL310 secure registers.
+ * 'r0' contains the value to be modified and 'r12' contains
+ * the monitor API number.
+ * Function signature : void highbank_smc1(u32 fn, u32 arg)
+ */
+
+ENTRY(highbank_smc1)
+ stmfd sp!, {r4-r11, lr}
+ mov r12, r0
+ mov r0, r1
+ dsb
+ smc #0
+ ldmfd sp!, {r4-r11, pc}
+ENDPROC(highbank_smc1)
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_KEYPAD
+ select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
clk_register_clkdev(clk[clk32], NULL, "mxc_rtc.0");
clk_register_clkdev(clk[clko], "clko", NULL);
- mxc_timer_init(NULL, MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR),
- MX1_TIM1_INT);
+ mxc_timer_init(MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), MX1_TIM1_INT);
return 0;
}
clk_register_clkdev(clk[sdhc1_ipg_gate], "sdhc1", NULL);
clk_register_clkdev(clk[sdhc2_ipg_gate], "sdhc2", NULL);
- mxc_timer_init(NULL, MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR),
- MX21_INT_GPT1);
+ mxc_timer_init(MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR), MX21_INT_GPT1);
+
return 0;
}
clk_register_clkdev(clk[sdma_ahb], "ahb", "imx35-sdma");
clk_register_clkdev(clk[iim_ipg], "iim", NULL);
- mxc_timer_init(NULL, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
+ mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
return 0;
}
clk_register_clkdev(clk[ssi1_baud_gate], "bitrate" , "imx-ssi.0");
clk_register_clkdev(clk[ssi2_baud_gate], "bitrate" , "imx-ssi.1");
- mxc_timer_init(NULL, MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR),
- MX27_INT_GPT1);
+ mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1);
clk_prepare_enable(clk[emi_ahb_gate]);
mx31_revision();
clk_disable_unprepare(clk[iim_gate]);
- mxc_timer_init(NULL, MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR),
- MX31_INT_GPT);
+ mxc_timer_init(MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR), MX31_INT_GPT);
return 0;
}
pr_err("i.MX35 clk %d: register failed with %ld\n",
i, PTR_ERR(clk[i]));
-
clk_register_clkdev(clk[pata_gate], NULL, "pata_imx");
clk_register_clkdev(clk[can1_gate], NULL, "flexcan.0");
clk_register_clkdev(clk[can2_gate], NULL, "flexcan.1");
clk_prepare_enable(clk[iim_gate]);
clk_prepare_enable(clk[emi_gate]);
+ /*
+ * SCC is needed to boot via mmc after a watchdog reset. The clock code
+ * before conversion to common clk also enabled UART1 (which isn't
+ * handled here and not needed for mmc) and IIM (which is enabled
+ * unconditionally above).
+ */
+ clk_prepare_enable(clk[scc_gate]);
+
imx_print_silicon_rev("i.MX35", mx35_revision());
#ifdef CONFIG_MXC_USE_EPIT
- epit_timer_init(&epit1_clk,
- MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
+ epit_timer_init(MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
#else
- mxc_timer_init(NULL, MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR),
- MX35_INT_GPT);
+ mxc_timer_init(MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);
#endif
return 0;
periph_apm_sel, ARRAY_SIZE(periph_apm_sel));
clk[main_bus] = imx_clk_mux("main_bus", MXC_CCM_CBCDR, 25, 1,
main_bus_sel, ARRAY_SIZE(main_bus_sel));
- clk[per_lp_apm] = imx_clk_mux("per_lp_apm", MXC_CCM_CBCDR, 1, 1,
+ clk[per_lp_apm] = imx_clk_mux("per_lp_apm", MXC_CCM_CBCMR, 1, 1,
per_lp_apm_sel, ARRAY_SIZE(per_lp_apm_sel));
clk[per_pred1] = imx_clk_divider("per_pred1", "per_lp_apm", MXC_CCM_CBCDR, 6, 2);
clk[per_pred2] = imx_clk_divider("per_pred2", "per_pred1", MXC_CCM_CBCDR, 3, 3);
clk[per_podf] = imx_clk_divider("per_podf", "per_pred2", MXC_CCM_CBCDR, 0, 3);
- clk[per_root] = imx_clk_mux("per_root", MXC_CCM_CBCDR, 1, 0,
+ clk[per_root] = imx_clk_mux("per_root", MXC_CCM_CBCMR, 0, 1,
per_root_sel, ARRAY_SIZE(per_root_sel));
clk[ahb] = imx_clk_divider("ahb", "main_bus", MXC_CCM_CBCDR, 10, 3);
clk[ahb_max] = imx_clk_gate2("ahb_max", "ahb", MXC_CCM_CCGR0, 28);
clk[pwm1_hf_gate] = imx_clk_gate2("pwm1_hf_gate", "ipg", MXC_CCM_CCGR2, 12);
clk[pwm2_ipg_gate] = imx_clk_gate2("pwm2_ipg_gate", "ipg", MXC_CCM_CCGR2, 14);
clk[pwm2_hf_gate] = imx_clk_gate2("pwm2_hf_gate", "ipg", MXC_CCM_CCGR2, 16);
- clk[gpt_gate] = imx_clk_gate2("gpt_gate", "ipg", MXC_CCM_CCGR2, 18);
+ clk[gpt_gate] = imx_clk_gate2("gpt_gate", "per_root", MXC_CCM_CCGR2, 18);
clk[fec_gate] = imx_clk_gate2("fec_gate", "ipg", MXC_CCM_CCGR2, 24);
clk[usboh3_gate] = imx_clk_gate2("usboh3_gate", "ipg", MXC_CCM_CCGR2, 26);
clk[usboh3_per_gate] = imx_clk_gate2("usboh3_per_gate", "usboh3_podf", MXC_CCM_CCGR2, 28);
clk_set_rate(clk[esdhc_b_podf], 166250000);
/* System timer */
- mxc_timer_init(NULL, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR),
- MX51_INT_GPT);
+ mxc_timer_init(MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR), MX51_INT_GPT);
clk_prepare_enable(clk[iim_gate]);
imx_print_silicon_rev("i.MX51", mx51_revision());
clk_set_rate(clk[esdhc_b_podf], 200000000);
/* System timer */
- mxc_timer_init(NULL, MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR),
- MX53_INT_GPT);
+ mxc_timer_init(MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR), MX53_INT_GPT);
clk_prepare_enable(clk[iim_gate]);
imx_print_silicon_rev("i.MX53", mx53_revision());
"dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0",
"ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio", };
-static const char * const clks_init_on[] __initconst = {
- "mmdc_ch0_axi", "mmdc_ch1_axi", "usboh3",
-};
-
enum mx6q_clks {
dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m,
pll3_pfd0_720m, pll3_pfd1_540m, pll3_pfd2_508m, pll3_pfd3_454m,
ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3,
usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg,
- ssi2_ipg, ssi3_ipg, clk_max
+ ssi2_ipg, ssi3_ipg, rom,
+ clk_max
};
static struct clk *clk[clk_max];
+static enum mx6q_clks const clks_init_on[] __initconst = {
+ mmdc_ch0_axi, rom,
+};
+
int __init mx6q_clocks_init(void)
{
struct device_node *np;
void __iomem *base;
- struct clk *c;
int i, irq;
clk[dummy] = imx_clk_fixed("dummy", 0);
clk[gpmi_bch] = imx_clk_gate2("gpmi_bch", "usdhc4", base + 0x78, 26);
clk[gpmi_io] = imx_clk_gate2("gpmi_io", "enfc", base + 0x78, 28);
clk[gpmi_apb] = imx_clk_gate2("gpmi_apb", "usdhc3", base + 0x78, 30);
+ clk[rom] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0);
clk[sata] = imx_clk_gate2("sata", "ipg", base + 0x7c, 4);
clk[sdma] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6);
clk[spba] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12);
clk_register_clkdev(clk[ahb], "ahb", NULL);
clk_register_clkdev(clk[cko1], "cko1", NULL);
- for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) {
- c = clk_get_sys(clks_init_on[i], NULL);
- if (IS_ERR(c)) {
- pr_err("%s: failed to get clk %s", __func__,
- clks_init_on[i]);
- return PTR_ERR(c);
- }
- clk_prepare_enable(c);
- }
+ for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
+ clk_prepare_enable(clk[clks_init_on[i]]);
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
base = of_iomap(np, 0);
WARN_ON(!base);
irq = irq_of_parse_and_map(np, 0);
- mxc_timer_init(NULL, base, irq);
+ mxc_timer_init(base, irq);
return 0;
}
void __iomem *base;
};
-static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
+static unsigned long __clk_pllv2_recalc_rate(unsigned long parent_rate,
+ u32 dp_ctl, u32 dp_op, u32 dp_mfd, u32 dp_mfn)
{
long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
- unsigned long dp_op, dp_mfd, dp_mfn, dp_ctl, pll_hfsm, dbl;
- void __iomem *pllbase;
+ unsigned long dbl;
s64 temp;
- struct clk_pllv2 *pll = to_clk_pllv2(hw);
-
- pllbase = pll->base;
- dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
- pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
dbl = dp_ctl & MXC_PLL_DP_CTL_DPDCK0_2_EN;
- if (pll_hfsm == 0) {
- dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
- dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
- dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
- } else {
- dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP);
- dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD);
- dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN);
- }
pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET;
mfi = (mfi <= 5) ? 5 : mfi;
return temp;
}
-static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate,
+static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
+ u32 dp_op, dp_mfd, dp_mfn, dp_ctl;
+ void __iomem *pllbase;
struct clk_pllv2 *pll = to_clk_pllv2(hw);
+
+ pllbase = pll->base;
+
+ dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+ dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
+ dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
+ dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
+
+ return __clk_pllv2_recalc_rate(parent_rate, dp_ctl, dp_op, dp_mfd, dp_mfn);
+}
+
+static int __clk_pllv2_set_rate(unsigned long rate, unsigned long parent_rate,
+ u32 *dp_op, u32 *dp_mfd, u32 *dp_mfn)
+{
u32 reg;
- void __iomem *pllbase;
long mfi, pdf, mfn, mfd = 999999;
s64 temp64;
unsigned long quad_parent_rate;
- unsigned long pll_hfsm, dp_ctl;
-
- pllbase = pll->base;
quad_parent_rate = 4 * parent_rate;
pdf = mfi = -1;
return -EINVAL;
pdf--;
- temp64 = rate * (pdf+1) - quad_parent_rate * mfi;
- do_div(temp64, quad_parent_rate/1000000);
+ temp64 = rate * (pdf + 1) - quad_parent_rate * mfi;
+ do_div(temp64, quad_parent_rate / 1000000);
mfn = (long)temp64;
+ reg = mfi << 4 | pdf;
+
+ *dp_op = reg;
+ *dp_mfd = mfd;
+ *dp_mfn = mfn;
+
+ return 0;
+}
+
+static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_pllv2 *pll = to_clk_pllv2(hw);
+ void __iomem *pllbase;
+ u32 dp_ctl, dp_op, dp_mfd, dp_mfn;
+ int ret;
+
+ pllbase = pll->base;
+
+
+ ret = __clk_pllv2_set_rate(rate, parent_rate, &dp_op, &dp_mfd, &dp_mfn);
+ if (ret)
+ return ret;
+
dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
/* use dpdck0_2 */
__raw_writel(dp_ctl | 0x1000L, pllbase + MXC_PLL_DP_CTL);
- pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
- if (pll_hfsm == 0) {
- reg = mfi << 4 | pdf;
- __raw_writel(reg, pllbase + MXC_PLL_DP_OP);
- __raw_writel(mfd, pllbase + MXC_PLL_DP_MFD);
- __raw_writel(mfn, pllbase + MXC_PLL_DP_MFN);
- } else {
- reg = mfi << 4 | pdf;
- __raw_writel(reg, pllbase + MXC_PLL_DP_HFS_OP);
- __raw_writel(mfd, pllbase + MXC_PLL_DP_HFS_MFD);
- __raw_writel(mfn, pllbase + MXC_PLL_DP_HFS_MFN);
- }
+
+ __raw_writel(dp_op, pllbase + MXC_PLL_DP_OP);
+ __raw_writel(dp_mfd, pllbase + MXC_PLL_DP_MFD);
+ __raw_writel(dp_mfn, pllbase + MXC_PLL_DP_MFN);
return 0;
}
static long clk_pllv2_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *prate)
{
- return rate;
+ u32 dp_op, dp_mfd, dp_mfn;
+
+ __clk_pllv2_set_rate(rate, *prate, &dp_op, &dp_mfd, &dp_mfn);
+ return __clk_pllv2_recalc_rate(*prate, MXC_PLL_DP_CTL_DPDCK0_2_EN,
+ dp_op, dp_mfd, dp_mfn);
}
static int clk_pllv2_prepare(struct clk_hw *hw)
#define MX53_DPLL1_BASE MX53_IO_ADDRESS(MX53_PLL1_BASE_ADDR)
#define MX53_DPLL2_BASE MX53_IO_ADDRESS(MX53_PLL2_BASE_ADDR)
#define MX53_DPLL3_BASE MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
-#define MX53_DPLL4_BASE MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
+#define MX53_DPLL4_BASE MX53_IO_ADDRESS(MX53_PLL4_BASE_ADDR)
/* PLL Register Offsets */
#define MXC_PLL_DP_CTL 0x00
#include <linux/errno.h>
#include <asm/cacheflush.h>
+#include <asm/cp15.h>
#include <mach/common.h>
int platform_cpu_kill(unsigned int cpu)
return 1;
}
+static inline void cpu_enter_lowpower(void)
+{
+ unsigned int v;
+
+ flush_cache_all();
+ asm volatile(
+ "mcr p15, 0, %1, c7, c5, 0\n"
+ " mcr p15, 0, %1, c7, c10, 4\n"
+ /*
+ * Turn off coherency
+ */
+ " mrc p15, 0, %0, c1, c0, 1\n"
+ " bic %0, %0, %3\n"
+ " mcr p15, 0, %0, c1, c0, 1\n"
+ " mrc p15, 0, %0, c1, c0, 0\n"
+ " bic %0, %0, %2\n"
+ " mcr p15, 0, %0, c1, c0, 0\n"
+ : "=&r" (v)
+ : "r" (0), "Ir" (CR_C), "Ir" (0x40)
+ : "cc");
+}
+
+static inline void cpu_leave_lowpower(void)
+{
+ unsigned int v;
+
+ asm volatile(
+ "mrc p15, 0, %0, c1, c0, 0\n"
+ " orr %0, %0, %1\n"
+ " mcr p15, 0, %0, c1, c0, 0\n"
+ " mrc p15, 0, %0, c1, c0, 1\n"
+ " orr %0, %0, %2\n"
+ " mcr p15, 0, %0, c1, c0, 1\n"
+ : "=&r" (v)
+ : "Ir" (CR_C), "Ir" (0x40)
+ : "cc");
+}
+
/*
* platform-specific code to shutdown a CPU
*
*/
void platform_cpu_die(unsigned int cpu)
{
- flush_cache_all();
+ cpu_enter_lowpower();
imx_enable_cpu(cpu, false);
cpu_do_idle();
+ cpu_leave_lowpower();
/* We should never return from idle */
panic("cpu %d unexpectedly exit from shutdown\n", cpu);
I2C_BOARD_INFO("pcf8563", 0x51),
}, {
I2C_BOARD_INFO("tsc2007", 0x48),
- .type = "tsc2007",
.platform_data = &tsc2007_info,
.irq = IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO),
},
I2C_BOARD_INFO("pcf8563", 0x51),
}, {
I2C_BOARD_INFO("tsc2007", 0x49),
- .type = "tsc2007",
.platform_data = &tsc2007_info,
},
};
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <asm/system.h>
+#include <asm/system_info.h>
#include <mach/common.h>
#include <mach/iomux-mx27.h>
PB23_PF_USB_PWR,
PB24_PF_USB_OC,
/* CSI */
+ TVP5150_RSTN | GPIO_GPIO | GPIO_OUT,
+ TVP5150_PWDN | GPIO_GPIO | GPIO_OUT,
PB10_PF_CSI_D0,
PB11_PF_CSI_D1,
PB12_PF_CSI_D2,
{ MOTHERBOARD_BIT2, GPIOF_IN, "mother-version-2" },
};
+static const struct gpio visstrim_m10_gpios[] __initconst = {
+ {
+ .gpio = TVP5150_RSTN,
+ .flags = GPIOF_DIR_OUT | GPIOF_INIT_HIGH,
+ .label = "tvp5150_rstn",
+ },
+ {
+ .gpio = TVP5150_PWDN,
+ .flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW,
+ .label = "tvp5150_pwdn",
+ },
+ {
+ .gpio = OTG_PHY_CS_GPIO,
+ .flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW,
+ .label = "usbotg_cs",
+ },
+};
+
/* Camera */
static int visstrim_camera_power(struct device *dev, int on)
{
struct platform_device *pdev;
int dma;
- /* Initialize tvp5150 gpios */
- mxc_gpio_mode(TVP5150_RSTN | GPIO_GPIO | GPIO_OUT);
- mxc_gpio_mode(TVP5150_PWDN | GPIO_GPIO | GPIO_OUT);
- gpio_set_value(TVP5150_RSTN, 1);
- gpio_set_value(TVP5150_PWDN, 0);
- ndelay(1);
-
gpio_set_value(TVP5150_PWDN, 1);
ndelay(1);
gpio_set_value(TVP5150_RSTN, 0);
/* USB OTG */
static int otg_phy_init(struct platform_device *pdev)
{
- gpio_set_value(OTG_PHY_CS_GPIO, 0);
-
- mdelay(10);
-
return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
}
if (ret)
pr_err("Failed to setup pins (%d)\n", ret);
+ ret = gpio_request_array(visstrim_m10_gpios,
+ ARRAY_SIZE(visstrim_m10_gpios));
+ if (ret)
+ pr_err("Failed to request gpios (%d)\n", ret);
+
imx27_add_imx_ssi(0, &visstrim_m10_ssi_pdata);
imx27_add_imx_uart0(&uart_pdata);
* Memory-mapped I/O on MX21ADS base board
*/
#define MX21ADS_MMIO_BASE_ADDR 0xf5000000
-#define MX21ADS_MMIO_SIZE SZ_16M
+#define MX21ADS_MMIO_SIZE 0xc00000
#define MX21ADS_REG_ADDR(offset) (void __force __iomem *) \
(MX21ADS_MMIO_BASE_ADDR + (offset))
void __init imx3_init_l2x0(void)
{
+#ifdef CONFIG_CACHE_L2X0
void __iomem *l2x0_base;
void __iomem *clkctl_base;
}
l2x0_init(l2x0_base, 0x00030024, 0x00000000);
+#endif
}
#ifdef CONFIG_SOC_IMX31
mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);
+ pinctrl_provide_dummies();
+
if (to_version == 1) {
strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin",
strlen(imx31_sdma_pdata.fw_name));
mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_INT_GPIO3_LOW, MX51_INT_GPIO3_HIGH);
mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_INT_GPIO4_LOW, MX51_INT_GPIO4_HIGH);
+ pinctrl_provide_dummies();
+
/* i.mx51 has the i.mx35 type sdma */
imx_add_imx_sdma("imx35-sdma", MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata);
#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
#include <linux/leds.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
gate_fn->gate.flags = clk_gate_flags;
gate_fn->gate.lock = lock;
gate_fn->gate.hw.init = &init;
+ gate_fn->fn = fn;
/* ops is the gate ops, but with our disable function */
if (clk_gate_fn_ops.disable != clk_gate_fn_disable) {
bit_idx, 0, &gating_lock, fn);
}
+static struct clk *ge0, *ge1;
+
void __init kirkwood_clk_init(void)
{
- struct clk *runit, *ge0, *ge1, *sata0, *sata1, *usb0, *sdio;
+ struct clk *runit, *sata0, *sata1, *usb0, *sdio;
struct clk *crypto, *xor0, *xor1, *pex0, *pex1, *audio;
tclk = clk_register_fixed_rate(NULL, "tclk", NULL,
orion_ge00_init(eth_data,
GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM,
IRQ_KIRKWOOD_GE00_ERR);
+ /* The interface forgets the MAC address assigned by u-boot if
+ the clock is turned off, so claim the clk now. */
+ clk_prepare_enable(ge0);
}
orion_ge01_init(eth_data,
GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM,
IRQ_KIRKWOOD_GE01_ERR);
+ clk_prepare_enable(ge1);
}
#define IRQ_MASK_HIGH_OFF 0x0014
#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300)
#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128)
#define L2_WRITETHROUGH 0x00000010
#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100)
#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000)
+#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x20000)
#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x30000)
+++ /dev/null
-#ifndef __ASM_MACH_GPIO_PXA_H
-#define __ASM_MACH_GPIO_PXA_H
-
-#include <mach/addr-map.h>
-#include <mach/cputype.h>
-#include <mach/irqs.h>
-
-#define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000)
-
-#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
-#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
-
-#define gpio_to_bank(gpio) ((gpio) >> 5)
-
-/* NOTE: these macros are defined here to make optimization of
- * gpio_{get,set}_value() to work when 'gpio' is a constant.
- * Usage of these macros otherwise is no longer recommended,
- * use generic GPIO API whenever possible.
- */
-#define GPIO_bit(gpio) (1 << ((gpio) & 0x1f))
-
-#define GPLR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x00)
-#define GPDR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x0c)
-#define GPSR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x18)
-#define GPCR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x24)
-
-#include <plat/gpio-pxa.h>
-
-#endif /* __ASM_MACH_GPIO_PXA_H */
icu_data[1].clr_mfp_irq_base = IRQ_MMP2_PMIC_BASE;
icu_data[1].clr_mfp_hwirq = IRQ_MMP2_PMIC - IRQ_MMP2_PMIC_BASE;
icu_data[1].nr_irqs = 2;
+ icu_data[1].cascade_irq = 4;
icu_data[1].virq_base = IRQ_MMP2_PMIC_BASE;
icu_data[1].domain = irq_domain_add_legacy(NULL, icu_data[1].nr_irqs,
icu_data[1].virq_base, 0,
icu_data[2].reg_status = mmp_icu_base + 0x154;
icu_data[2].reg_mask = mmp_icu_base + 0x16c;
icu_data[2].nr_irqs = 2;
+ icu_data[2].cascade_irq = 5;
icu_data[2].virq_base = IRQ_MMP2_RTC_BASE;
icu_data[2].domain = irq_domain_add_legacy(NULL, icu_data[2].nr_irqs,
icu_data[2].virq_base, 0,
icu_data[3].reg_status = mmp_icu_base + 0x180;
icu_data[3].reg_mask = mmp_icu_base + 0x17c;
icu_data[3].nr_irqs = 3;
+ icu_data[3].cascade_irq = 9;
icu_data[3].virq_base = IRQ_MMP2_KEYPAD_BASE;
icu_data[3].domain = irq_domain_add_legacy(NULL, icu_data[3].nr_irqs,
icu_data[3].virq_base, 0,
icu_data[4].reg_status = mmp_icu_base + 0x158;
icu_data[4].reg_mask = mmp_icu_base + 0x170;
icu_data[4].nr_irqs = 5;
+ icu_data[4].cascade_irq = 17;
icu_data[4].virq_base = IRQ_MMP2_TWSI_BASE;
icu_data[4].domain = irq_domain_add_legacy(NULL, icu_data[4].nr_irqs,
icu_data[4].virq_base, 0,
icu_data[5].reg_status = mmp_icu_base + 0x15c;
icu_data[5].reg_mask = mmp_icu_base + 0x174;
icu_data[5].nr_irqs = 15;
+ icu_data[5].cascade_irq = 35;
icu_data[5].virq_base = IRQ_MMP2_MISC_BASE;
icu_data[5].domain = irq_domain_add_legacy(NULL, icu_data[5].nr_irqs,
icu_data[5].virq_base, 0,
icu_data[6].reg_status = mmp_icu_base + 0x160;
icu_data[6].reg_mask = mmp_icu_base + 0x178;
icu_data[6].nr_irqs = 2;
+ icu_data[6].cascade_irq = 51;
icu_data[6].virq_base = IRQ_MMP2_MIPI_HSI1_BASE;
icu_data[6].domain = irq_domain_add_legacy(NULL, icu_data[6].nr_irqs,
icu_data[6].virq_base, 0,
icu_data[7].reg_status = mmp_icu_base + 0x188;
icu_data[7].reg_mask = mmp_icu_base + 0x184;
icu_data[7].nr_irqs = 2;
+ icu_data[7].cascade_irq = 55;
icu_data[7].virq_base = IRQ_MMP2_MIPI_HSI0_BASE;
icu_data[7].domain = irq_domain_add_legacy(NULL, icu_data[7].nr_irqs,
icu_data[7].virq_base, 0,
#define IRQ_MASK_HIGH_OFF 0x0014
#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300)
#endif
#define MV78XX0_CORE0_REGS_PHYS_BASE 0xf1020000
#define MV78XX0_CORE1_REGS_PHYS_BASE 0xf1024000
#define MV78XX0_CORE_REGS_VIRT_BASE 0xfe400000
+#define MV78XX0_CORE_REGS_PHYS_BASE 0xfe400000
#define MV78XX0_CORE_REGS_SIZE SZ_16K
#define MV78XX0_PCIE_IO_PHYS_BASE(i) (0xf0800000 + ((i) << 20))
* Core-specific peripheral registers.
*/
#define BRIDGE_VIRT_BASE (MV78XX0_CORE_REGS_VIRT_BASE)
+#define BRIDGE_PHYS_BASE (MV78XX0_CORE_REGS_PHYS_BASE)
/*
* Register Map
return 0;
}
+static void __init apx4devkit_fec_phy_clk_enable(void)
+{
+ struct clk *clk;
+
+ /* Enable fec phy clock */
+ clk = clk_get_sys("enet_out", NULL);
+ if (!IS_ERR(clk))
+ clk_prepare_enable(clk);
+}
+
static void __init apx4devkit_init(void)
{
mx28_soc_init();
phy_register_fixup_for_uid(PHY_ID_KS8051, MICREL_PHY_ID_MASK,
apx4devkit_phy_fixup);
+ apx4devkit_fec_phy_clk_enable();
mx28_add_fec(0, &mx28_fec_pdata);
mx28_add_mxs_mmc(0, &apx4devkit_mmc_pdata);
gpmc_onenand_init(&board_onenand_data);
}
-#else
-void
-__init board_onenand_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs)
-{
-}
#endif /* CONFIG_MTD_ONENAND_OMAP2 || CONFIG_MTD_ONENAND_OMAP2_MODULE */
#if defined(CONFIG_MTD_NAND_OMAP2) || \
};
static struct musb_hdrc_platform_data tusb_data = {
-#if defined(CONFIG_USB_MUSB_OTG)
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
.mode = MUSB_OTG,
-#elif defined(CONFIG_USB_MUSB_PERIPHERAL)
- .mode = MUSB_PERIPHERAL,
-#else /* defined(CONFIG_USB_MUSB_HOST) */
+#else
.mode = MUSB_HOST,
#endif
.set_power = tusb_set_power,
static struct {
int mmc1_gpio_wp;
int usb_pwr_level;
- int reset_gpio;
+ int dvi_pd_gpio;
int usr_button_gpio;
int mmc_caps;
} beagle_config = {
.mmc1_gpio_wp = -EINVAL,
.usb_pwr_level = GPIOF_OUT_INIT_LOW,
- .reset_gpio = 129,
+ .dvi_pd_gpio = -EINVAL,
.usr_button_gpio = 4,
.mmc_caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
};
printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX;
beagle_config.mmc1_gpio_wp = 29;
- beagle_config.reset_gpio = 170;
+ beagle_config.dvi_pd_gpio = 170;
beagle_config.usr_button_gpio = 7;
break;
case 6:
printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3;
beagle_config.mmc1_gpio_wp = 23;
- beagle_config.reset_gpio = 170;
+ beagle_config.dvi_pd_gpio = 170;
beagle_config.usr_button_gpio = 7;
break;
case 5:
printk(KERN_INFO "OMAP3 Beagle Rev: C4\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_C4;
beagle_config.mmc1_gpio_wp = 23;
- beagle_config.reset_gpio = 170;
+ beagle_config.dvi_pd_gpio = 170;
beagle_config.usr_button_gpio = 7;
break;
case 0:
if (r)
pr_err("%s: unable to configure nDVI_PWR_EN\n",
__func__);
- r = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH,
- "DVI_LDO_EN");
- if (r)
- pr_err("%s: unable to configure DVI_LDO_EN\n",
- __func__);
+
+ beagle_config.dvi_pd_gpio = gpio + 2;
+
} else {
/*
* REVISIT: need ehci-omap hooks for external VBUS
if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"))
pr_err("%s: unable to configure EHCI_nOC\n", __func__);
}
- dvi_panel.power_down_gpio = beagle_config.reset_gpio;
+ dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio;
gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level,
"nEN_USB_PWR");
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap3_beagle_init_rev();
- if (beagle_config.mmc1_gpio_wp != -EINVAL)
+ if (gpio_is_valid(beagle_config.mmc1_gpio_wp))
omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT);
mmc[0].caps = beagle_config.mmc_caps;
omap_hsmmc_init(mmc);
platform_add_devices(omap3_beagle_devices,
ARRAY_SIZE(omap3_beagle_devices));
+ if (gpio_is_valid(beagle_config.dvi_pd_gpio))
+ omap_mux_init_gpio(beagle_config.dvi_pd_gpio, OMAP_PIN_OUTPUT);
omap_display_init(&beagle_dss_data);
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
- omap_mux_init_gpio(170, OMAP_PIN_INPUT);
- /* REVISIT leave DVI powered down until it's needed ... */
- gpio_request_one(170, GPIOF_OUT_INIT_HIGH, "DVI_nPD");
-
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
- omap_hsmmc_init(mmc);
overo_i2c_init();
+ omap_hsmmc_init(mmc);
omap_display_init(&overo_dss_data);
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
.release_resources = lis302_release,
.st_min_limits = {-32, 3, 3},
.st_max_limits = {-3, 32, 32},
- .irq2 = OMAP_GPIO_IRQ(LIS302_IRQ2_GPIO),
};
#endif
{
I2C_BOARD_INFO("lis3lv02d", 0x1d),
.platform_data = &rx51_lis3lv02d_data,
- .irq = OMAP_GPIO_IRQ(LIS302_IRQ1_GPIO),
},
#endif
};
omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata);
omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
+#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)
+ rx51_lis3lv02d_data.irq2 = gpio_to_irq(LIS302_IRQ2_GPIO);
+ rx51_peripherals_i2c_board_info_3[0].irq = gpio_to_irq(LIS302_IRQ1_GPIO);
+#endif
omap_register_i2c_bus(3, 400, rx51_peripherals_i2c_board_info_3,
ARRAY_SIZE(rx51_peripherals_i2c_board_info_3));
return 0;
struct omap_clk *c;
u32 cpu_clkflg = 0;
- if (cpu_is_omap3517()) {
+ if (soc_is_am35xx()) {
cpu_mask = RATE_IN_34XX;
cpu_clkflg = CK_AM35XX;
} else if (cpu_is_omap3630()) {
static struct clk sys_32k_ck = {
.name = "sys_32k_ck",
+ .clkdm_name = "prm_clkdm",
.rate = 32768,
.ops = &clkops_null,
};
.name = "ddrphy_ck",
.parent = &dpll_core_m2_ck,
.ops = &clkops_null,
+ .clkdm_name = "l3_emif_clkdm",
.fixed_div = 2,
.recalc = &omap_fixed_divisor_recalc,
};
static struct clk dpll_mpu_m2_ck = {
.name = "dpll_mpu_m2_ck",
.parent = &dpll_mpu_ck,
+ .clkdm_name = "cm_clkdm",
.clksel = dpll_mpu_m2_div,
.clksel_reg = OMAP4430_CM_DIV_M2_DPLL_MPU,
.clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK,
static struct clk l3_div_ck = {
.name = "l3_div_ck",
.parent = &div_core_ck,
+ .clkdm_name = "cm_clkdm",
.clksel = l3_div_div,
.clksel_reg = OMAP4430_CM_CLKSEL_CORE,
.clksel_mask = OMAP4430_CLKSEL_L3_MASK,
static struct clk trace_clk_div_ck = {
.name = "trace_clk_div_ck",
.parent = &pmd_trace_clk_mux_ck,
+ .clkdm_name = "emu_sys_clkdm",
.clksel = trace_clk_div_div,
.clksel_reg = OMAP4430_CM_EMU_DEBUGSS_CLKCTRL,
.clksel_mask = OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK,
if (cpu_is_omap443x()) {
cpu_mask = RATE_IN_4430;
cpu_clkflg = CK_443X;
- } else if (cpu_is_omap446x()) {
+ } else if (cpu_is_omap446x() || cpu_is_omap447x()) {
cpu_mask = RATE_IN_4460 | RATE_IN_4430;
cpu_clkflg = CK_446X | CK_443X;
+
+ if (cpu_is_omap447x())
+ pr_warn("WARNING: OMAP4470 clock data incomplete!\n");
} else {
return 0;
}
*
* CLKDM_NO_AUTODEPS: Prevent "autodeps" from being added/removed from this
* clockdomain. (Currently, this applies to OMAP3 clockdomains only.)
+ * CLKDM_ACTIVE_WITH_MPU: The PRCM guarantees that this clockdomain is
+ * active whenever the MPU is active. True for interconnects and
+ * the WKUP clockdomains.
*/
#define CLKDM_CAN_FORCE_SLEEP (1 << 0)
#define CLKDM_CAN_FORCE_WAKEUP (1 << 1)
#define CLKDM_CAN_ENABLE_AUTO (1 << 2)
#define CLKDM_CAN_DISABLE_AUTO (1 << 3)
#define CLKDM_NO_AUTODEPS (1 << 4)
+#define CLKDM_ACTIVE_WITH_MPU (1 << 5)
#define CLKDM_CAN_HWSUP (CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_DISABLE_AUTO)
#define CLKDM_CAN_SWSUP (CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP)
.name = "wkup_clkdm",
.pwrdm = { .name = "wkup_pwrdm" },
.dep_bit = OMAP_EN_WKUP_SHIFT,
+ .flags = CLKDM_ACTIVE_WITH_MPU,
};
.cm_inst = OMAP4430_PRM_WKUP_CM_INST,
.clkdm_offs = OMAP4430_PRM_WKUP_CM_WKUP_CDOFFS,
.dep_bit = OMAP4430_L4WKUP_STATDEP_SHIFT,
- .flags = CLKDM_CAN_HWSUP,
+ .flags = CLKDM_CAN_HWSUP | CLKDM_ACTIVE_WITH_MPU,
};
static struct clockdomain emu_sys_44xx_clkdm = {
*/
#define MAX_MODULE_READY_TIME 2000
+/*
+ * MAX_MODULE_DISABLE_TIME: max duration in microseconds to wait for
+ * the PRCM to request that a module enter the inactive state in the
+ * case of OMAP2 & 3. In the case of OMAP4 this is the max duration
+ * in microseconds for the module to reach the inactive state from
+ * a functional state.
+ * XXX FSUSB on OMAP4430 takes ~4ms to idle after reset during
+ * kernel init.
+ */
+#define MAX_MODULE_DISABLE_TIME 5000
+
#endif
omap_test_timeout((_clkctrl_idlest(part, inst, cdoffs, clkctrl_offs) ==
CLKCTRL_IDLEST_DISABLED),
- MAX_MODULE_READY_TIME, i);
+ MAX_MODULE_DISABLE_TIME, i);
- return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
+ return (i < MAX_MODULE_DISABLE_TIME) ? 0 : -EBUSY;
}
/**
goto err;
}
- r = omap_device_register(pdev);
+ r = platform_device_add(pdev);
if (r) {
- pr_err("Could not register omap_device for %s\n", pdev_name);
+ pr_err("Could not register platform_device for %s\n", pdev_name);
goto err;
}
#include <linux/module.h>
#include <linux/platform_device.h>
+
+#include <asm/memblock.h>
+
#include "cm2xxx_3xxx.h"
#include "prm2xxx_3xxx.h"
#ifdef CONFIG_BRIDGE_DVFS
omap_features |= OMAP3_HAS_SDRC;
+ /*
+ * am35x fixups:
+ * - The am35x Chip ID register has bits 12, 7:5, and 3:2 marked as
+ * reserved and therefore return 0 when read. Unfortunately,
+ * OMAP3_CHECK_FEATURE() will interpret some of those zeroes to
+ * mean that a feature is present even though it isn't so clear
+ * the incorrectly set feature bits.
+ */
+ if (soc_is_am35xx())
+ omap_features &= ~(OMAP3_HAS_IVA | OMAP3_HAS_ISP);
+
/*
* TODO: Get additional info (where applicable)
* e.g. Size of L2 cache.
ct->chip.irq_ack = omap_mask_ack_irq;
ct->chip.irq_mask = irq_gc_mask_disable_reg;
ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
+ ct->chip.flags |= IRQCHIP_SKIP_SET_WAKE;
ct->regs.enable = INTC_MIR_CLEAR0;
ct->regs.disable = INTC_MIR_SET0;
#include "control.h"
#include "mux.h"
#include "prm.h"
+#include "common.h"
#define OMAP_MUX_BASE_OFFSET 0x30 /* Offset from CTRL_BASE */
#define OMAP_MUX_BASE_SZ 0x5ca
return -ENODEV;
}
-static int __init
-omap_mux_get_by_name(const char *muxname,
+int __init omap_mux_get_by_name(const char *muxname,
struct omap_mux_partition **found_partition,
struct omap_mux **found_mux)
{
#define OMAP_PIN_OFF_WAKEUPENABLE OMAP_WAKEUP_EN
#define OMAP_MODE_GPIO(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE4)
+#define OMAP_MODE_UART(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE0)
/* Flags for omapX_mux_init */
#define OMAP_PACKAGE_MASK 0xffff
*/
void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state);
+int omap_mux_get_by_name(const char *muxname,
+ struct omap_mux_partition **found_partition,
+ struct omap_mux **found_mux);
#else
+static inline int omap_mux_get_by_name(const char *muxname,
+ struct omap_mux_partition **found_partition,
+ struct omap_mux **found_mux)
+{
+ return 0;
+}
+
static inline int omap_mux_init_gpio(int gpio, int val)
{
return 0;
if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)
_set_slave_idlemode(oh, HWMOD_IDLEMODE_SMART, v);
if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)
- _set_master_standbymode(oh, HWMOD_IDLEMODE_SMART_WKUP, v);
+ _set_master_standbymode(oh, HWMOD_IDLEMODE_SMART, v);
/* XXX test pwrdm_get_wken for this hwmod's subsystem */
* _enable_sysc - try to bring a module out of idle via OCP_SYSCONFIG
* @oh: struct omap_hwmod *
*
- * If module is marked as SWSUP_SIDLE, force the module out of slave
- * idle; otherwise, configure it for smart-idle. If module is marked
- * as SWSUP_MSUSPEND, force the module out of master standby;
- * otherwise, configure it for smart-standby. No return value.
+ * Ensure that the OCP_SYSCONFIG register for the IP block represented
+ * by @oh is set to indicate to the PRCM that the IP block is active.
+ * Usually this means placing the module into smart-idle mode and
+ * smart-standby, but if there is a bug in the automatic idle handling
+ * for the IP block, it may need to be placed into the force-idle or
+ * no-idle variants of these modes. No return value.
*/
static void _enable_sysc(struct omap_hwmod *oh)
{
u8 idlemode, sf;
u32 v;
+ bool clkdm_act;
if (!oh->class->sysc)
return;
sf = oh->class->sysc->sysc_flags;
if (sf & SYSC_HAS_SIDLEMODE) {
- idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
- HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART;
+ clkdm_act = ((oh->clkdm &&
+ oh->clkdm->flags & CLKDM_ACTIVE_WITH_MPU) ||
+ (oh->_clk && oh->_clk->clkdm &&
+ oh->_clk->clkdm->flags & CLKDM_ACTIVE_WITH_MPU));
+ if (clkdm_act && !(oh->class->sysc->idlemodes &
+ (SIDLE_SMART | SIDLE_SMART_WKUP)))
+ idlemode = HWMOD_IDLEMODE_FORCE;
+ else
+ idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
+ HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART;
_set_slave_idlemode(oh, idlemode, &v);
}
sf = oh->class->sysc->sysc_flags;
if (sf & SYSC_HAS_SIDLEMODE) {
- idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
- HWMOD_IDLEMODE_FORCE : HWMOD_IDLEMODE_SMART;
+ /* XXX What about HWMOD_IDLEMODE_SMART_WKUP? */
+ if (oh->flags & HWMOD_SWSUP_SIDLE ||
+ !(oh->class->sysc->idlemodes &
+ (SIDLE_SMART | SIDLE_SMART_WKUP)))
+ idlemode = HWMOD_IDLEMODE_FORCE;
+ else
+ idlemode = HWMOD_IDLEMODE_SMART;
_set_slave_idlemode(oh, idlemode, &v);
}
.rev_offs = 0x0000,
.sysc_offs = 0x0004,
.sysc_flags = SYSC_HAS_SIDLEMODE,
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- SIDLE_SMART_WKUP),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO),
.sysc_fields = &omap_hwmod_sysc_type1,
};
.name = "dss_hdmi",
.class = &omap44xx_hdmi_hwmod_class,
.clkdm_name = "l3_dss_clkdm",
+ /*
+ * HDMI audio requires to use no-idle mode. Hence,
+ * set idle mode by software.
+ */
+ .flags = HWMOD_SWSUP_SIDLE,
.mpu_irqs = omap44xx_dss_hdmi_irqs,
.sdma_reqs = omap44xx_dss_hdmi_sdma_reqs,
.main_clk = "dss_48mhz_clk",
static struct omap_hwmod_opt_clk mcbsp1_opt_clks[] = {
{ .role = "pad_fck", .clk = "pad_clks_ck" },
- { .role = "prcm_clk", .clk = "mcbsp1_sync_mux_ck" },
+ { .role = "prcm_fck", .clk = "mcbsp1_sync_mux_ck" },
};
static struct omap_hwmod omap44xx_mcbsp1_hwmod = {
static struct omap_hwmod_opt_clk mcbsp2_opt_clks[] = {
{ .role = "pad_fck", .clk = "pad_clks_ck" },
- { .role = "prcm_clk", .clk = "mcbsp2_sync_mux_ck" },
+ { .role = "prcm_fck", .clk = "mcbsp2_sync_mux_ck" },
};
static struct omap_hwmod omap44xx_mcbsp2_hwmod = {
static struct omap_hwmod_opt_clk mcbsp3_opt_clks[] = {
{ .role = "pad_fck", .clk = "pad_clks_ck" },
- { .role = "prcm_clk", .clk = "mcbsp3_sync_mux_ck" },
+ { .role = "prcm_fck", .clk = "mcbsp3_sync_mux_ck" },
};
static struct omap_hwmod omap44xx_mcbsp3_hwmod = {
static struct omap_hwmod_opt_clk mcbsp4_opt_clks[] = {
{ .role = "pad_fck", .clk = "pad_clks_ck" },
- { .role = "prcm_clk", .clk = "mcbsp4_sync_mux_ck" },
+ { .role = "prcm_fck", .clk = "mcbsp4_sync_mux_ck" },
};
static struct omap_hwmod omap44xx_mcbsp4_hwmod = {
};
/* usb_host_fs -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_usb_host_fs__l3_main_2 = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_usb_host_fs__l3_main_2 = {
.master = &omap44xx_usb_host_fs_hwmod,
.slave = &omap44xx_l3_main_2_hwmod,
.clk = "l3_div_ck",
};
/* aess -> l4_abe */
-static struct omap_hwmod_ocp_if omap44xx_aess__l4_abe = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_aess__l4_abe = {
.master = &omap44xx_aess_hwmod,
.slave = &omap44xx_l4_abe_hwmod,
.clk = "ocp_abe_iclk",
};
/* l4_abe -> aess */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_abe__aess = {
.master = &omap44xx_l4_abe_hwmod,
.slave = &omap44xx_aess_hwmod,
.clk = "ocp_abe_iclk",
};
/* l4_abe -> aess (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess_dma = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_abe__aess_dma = {
.master = &omap44xx_l4_abe_hwmod,
.slave = &omap44xx_aess_hwmod,
.clk = "ocp_abe_iclk",
};
/* l4_cfg -> usb_host_fs */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_fs = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_cfg__usb_host_fs = {
.master = &omap44xx_l4_cfg_hwmod,
.slave = &omap44xx_usb_host_fs_hwmod,
.clk = "l4_div_ck",
&omap44xx_iva__l3_main_2,
&omap44xx_l3_main_1__l3_main_2,
&omap44xx_l4_cfg__l3_main_2,
- &omap44xx_usb_host_fs__l3_main_2,
+ /* &omap44xx_usb_host_fs__l3_main_2, */
&omap44xx_usb_host_hs__l3_main_2,
&omap44xx_usb_otg_hs__l3_main_2,
&omap44xx_l3_main_1__l3_main_3,
&omap44xx_l3_main_2__l3_main_3,
&omap44xx_l4_cfg__l3_main_3,
- &omap44xx_aess__l4_abe,
+ /* &omap44xx_aess__l4_abe, */
&omap44xx_dsp__l4_abe,
&omap44xx_l3_main_1__l4_abe,
&omap44xx_mpu__l4_abe,
&omap44xx_l4_cfg__l4_wkup,
&omap44xx_mpu__mpu_private,
&omap44xx_l4_cfg__ocp_wp_noc,
- &omap44xx_l4_abe__aess,
- &omap44xx_l4_abe__aess_dma,
+ /* &omap44xx_l4_abe__aess, */
+ /* &omap44xx_l4_abe__aess_dma, */
&omap44xx_l3_main_2__c2c,
&omap44xx_l4_wkup__counter_32k,
&omap44xx_l4_cfg__ctrl_module_core,
&omap44xx_l4_per__uart2,
&omap44xx_l4_per__uart3,
&omap44xx_l4_per__uart4,
- &omap44xx_l4_cfg__usb_host_fs,
+ /* &omap44xx_l4_cfg__usb_host_fs, */
&omap44xx_l4_cfg__usb_host_hs,
&omap44xx_l4_cfg__usb_otg_hs,
&omap44xx_l4_cfg__usb_tll_hs,
u8 multi = error & L3_ERROR_LOG_MULTI;
u32 address = omap3_l3_decode_addr(error_addr);
- WARN(true, "%s seen by %s %s at address %x\n",
+ pr_err("%s seen by %s %s at address %x\n",
omap3_l3_code_string(code),
omap3_l3_initiator_string(initid),
multi ? "Multiple Errors" : "", address);
+ WARN_ON(1);
return IRQ_HANDLED;
}
devconf2 &= ~CONF2_OTGMODE;
switch (musb_mode) {
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
case MUSB_HOST: /* Force VBUS valid, ID = 0 */
devconf2 |= CONF2_FORCE_HOST;
break;
-#endif
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
case MUSB_PERIPHERAL: /* Force VBUS valid, ID = 1 */
devconf2 |= CONF2_FORCE_DEVICE;
break;
-#endif
-#ifdef CONFIG_USB_MUSB_OTG
case MUSB_OTG: /* Don't override the VBUS/ID comparators */
devconf2 |= CONF2_NO_OVERRIDE;
break;
-#endif
default:
pr_info(KERN_INFO "Unsupported mode %u\n", musb_mode);
}
ret = request_irq(omap_prcm_event_to_irq("io"),
_prcm_int_handle_io, IRQF_SHARED | IRQF_NO_SUSPEND, "pm_io",
omap3_pm_init);
+ enable_irq(omap_prcm_event_to_irq("io"));
if (ret) {
pr_err("pm: Failed to request pm_io irq\n");
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/irq.h>
#include "common.h"
#include <plat/cpu.h>
static int __init omap3xxx_prcm_init(void)
{
- if (cpu_is_omap34xx())
- return omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
- return 0;
+ int ret = 0;
+
+ if (cpu_is_omap34xx()) {
+ ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
+ if (!ret)
+ irq_set_status_flags(omap_prcm_event_to_irq("io"),
+ IRQ_NOAUTOEN);
+ }
+
+ return ret;
}
subsys_initcall(omap3xxx_prcm_init);
struct list_head node;
struct omap_hwmod *oh;
+ struct omap_device_pad default_omap_uart_pads[2];
};
static LIST_HEAD(uart_list);
#endif /* CONFIG_PM */
#ifdef CONFIG_OMAP_MUX
-static void omap_serial_fill_default_pads(struct omap_board_data *bdata)
+
+#define OMAP_UART_DEFAULT_PAD_NAME_LEN 28
+static char rx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN],
+ tx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN] __initdata;
+
+static void __init
+omap_serial_fill_uart_tx_rx_pads(struct omap_board_data *bdata,
+ struct omap_uart_state *uart)
+{
+ uart->default_omap_uart_pads[0].name = rx_pad_name;
+ uart->default_omap_uart_pads[0].flags = OMAP_DEVICE_PAD_REMUX |
+ OMAP_DEVICE_PAD_WAKEUP;
+ uart->default_omap_uart_pads[0].enable = OMAP_PIN_INPUT |
+ OMAP_MUX_MODE0;
+ uart->default_omap_uart_pads[0].idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0;
+ uart->default_omap_uart_pads[1].name = tx_pad_name;
+ uart->default_omap_uart_pads[1].enable = OMAP_PIN_OUTPUT |
+ OMAP_MUX_MODE0;
+ bdata->pads = uart->default_omap_uart_pads;
+ bdata->pads_cnt = ARRAY_SIZE(uart->default_omap_uart_pads);
+}
+
+static void __init omap_serial_check_wakeup(struct omap_board_data *bdata,
+ struct omap_uart_state *uart)
{
+ struct omap_mux_partition *tx_partition = NULL, *rx_partition = NULL;
+ struct omap_mux *rx_mux = NULL, *tx_mux = NULL;
+ char *rx_fmt, *tx_fmt;
+ int uart_nr = bdata->id + 1;
+
+ if (bdata->id != 2) {
+ rx_fmt = "uart%d_rx.uart%d_rx";
+ tx_fmt = "uart%d_tx.uart%d_tx";
+ } else {
+ rx_fmt = "uart%d_rx_irrx.uart%d_rx_irrx";
+ tx_fmt = "uart%d_tx_irtx.uart%d_tx_irtx";
+ }
+
+ snprintf(rx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, rx_fmt,
+ uart_nr, uart_nr);
+ snprintf(tx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, tx_fmt,
+ uart_nr, uart_nr);
+
+ if (omap_mux_get_by_name(rx_pad_name, &rx_partition, &rx_mux) >= 0 &&
+ omap_mux_get_by_name
+ (tx_pad_name, &tx_partition, &tx_mux) >= 0) {
+ u16 tx_mode, rx_mode;
+
+ tx_mode = omap_mux_read(tx_partition, tx_mux->reg_offset);
+ rx_mode = omap_mux_read(rx_partition, rx_mux->reg_offset);
+
+ /*
+ * Check if uart is used in default tx/rx mode i.e. in mux mode0
+ * if yes then configure rx pin for wake up capability
+ */
+ if (OMAP_MODE_UART(rx_mode) && OMAP_MODE_UART(tx_mode))
+ omap_serial_fill_uart_tx_rx_pads(bdata, uart);
+ }
}
#else
-static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {}
+static void __init omap_serial_check_wakeup(struct omap_board_data *bdata,
+ struct omap_uart_state *uart)
+{
+}
#endif
static char *cmdline_find_option(char *str)
bdata.pads = NULL;
bdata.pads_cnt = 0;
- if (cpu_is_omap44xx() || cpu_is_omap34xx())
- omap_serial_fill_default_pads(&bdata);
+ omap_serial_check_wakeup(&bdata, uart);
if (!info)
omap_serial_init_port(&bdata, NULL);
#include "twl-common.h"
#include "pm.h"
#include "voltage.h"
+#include "mux.h"
static struct i2c_board_info __initdata pmic_i2c_board_info = {
.addr = 0x48,
struct twl6040_platform_data *twl6040_data, int twl6040_irq)
{
/* PMIC part*/
+ omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
strncpy(omap4_i2c1_board_info[0].type, pmic_type,
sizeof(omap4_i2c1_board_info[0].type));
omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N;
};
static struct musb_hdrc_platform_data musb_plat = {
-#ifdef CONFIG_USB_MUSB_OTG
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
.mode = MUSB_OTG,
-#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
+#else
.mode = MUSB_HOST,
-#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
- .mode = MUSB_PERIPHERAL,
#endif
/* .clock is set dynamically */
.config = &musb_config,
printk(error, 3, status);
return status;
}
- tusb_resources[2].start = irq + IH_GPIO_BASE;
+ tusb_resources[2].start = gpio_to_irq(irq);
/* set up memory timings ... can speed them up later */
if (!ps_refclk) {
#define MAIN_IRQ_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x204)
#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300)
-
+#define TIMER_PHYS_BASE (ORION5X_BRIDGE_PHYS_BASE | 0x300)
#endif
--- /dev/null
+/*
+ * arch/arm/mach-orion5x/include/mach/io.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include <mach/orion5x.h>
+#include <asm/sizes.h>
+
+#define IO_SPACE_LIMIT SZ_2M
+static inline void __iomem *__io(unsigned long addr)
+{
+ return (void __iomem *)(addr + ORION5X_PCIE_IO_VIRT_BASE);
+}
+
+#define __io(a) __io(a)
+#endif
#define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2100)
#define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x20000)
+#define ORION5X_BRIDGE_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x20000)
#define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x30000)
GPIO19_SSP2_SCLK,
GPIO86_SSP2_RXD,
GPIO87_SSP2_TXD,
- GPIO88_GPIO,
+ GPIO88_GPIO | MFP_LPM_DRIVE_HIGH, /* TSC2046_CS */
+
+ /* BQ24022 Regulator */
+ GPIO72_GPIO | MFP_LPM_KEEP_OUTPUT, /* BQ24022_nCHARGE_EN */
+ GPIO96_GPIO | MFP_LPM_KEEP_OUTPUT, /* BQ24022_ISET2 */
/* HX4700 specific input GPIOs */
GPIO12_GPIO | WAKEUP_ON_EDGE_RISE, /* ASIC3_IRQ */
GPIO14_GPIO, /* nWLAN_IRQ */
/* HX4700 specific output GPIOs */
+ GPIO61_GPIO | MFP_LPM_DRIVE_HIGH, /* W3220_nRESET */
+ GPIO71_GPIO | MFP_LPM_DRIVE_HIGH, /* ASIC3_nRESET */
+ GPIO81_GPIO | MFP_LPM_DRIVE_HIGH, /* CPU_GP_nRESET */
+ GPIO116_GPIO | MFP_LPM_DRIVE_HIGH, /* CPU_HW_nRESET */
GPIO102_GPIO | MFP_LPM_DRIVE_LOW, /* SYNAPTICS_POWER_ON */
GPIO10_GPIO, /* GSM_IRQ */
{ GPIO110_HX4700_LCD_LVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_LVDD" },
{ GPIO111_HX4700_LCD_AVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_AVDD" },
{ GPIO32_HX4700_RS232_ON, GPIOF_OUT_INIT_HIGH, "RS232_ON" },
+ { GPIO61_HX4700_W3220_nRESET, GPIOF_OUT_INIT_HIGH, "W3220_nRESET" },
{ GPIO71_HX4700_ASIC3_nRESET, GPIOF_OUT_INIT_HIGH, "ASIC3_nRESET" },
+ { GPIO81_HX4700_CPU_GP_nRESET, GPIOF_OUT_INIT_HIGH, "CPU_GP_nRESET" },
{ GPIO82_HX4700_EUART_RESET, GPIOF_OUT_INIT_HIGH, "EUART_RESET" },
+ { GPIO116_HX4700_CPU_HW_nRESET, GPIOF_OUT_INIT_HIGH, "CPU_HW_nRESET" },
};
static void __init hx4700_init(void)
{
int ret;
+ PCFR = PCFR_GPR_EN | PCFR_OPDE;
+
pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config));
gpio_set_wake(GPIO12_HX4700_ASIC3_IRQ, 1);
ret = gpio_request_array(ARRAY_AND_SIZE(global_gpios));
static struct clk s3c2440_clk_ac97 = {
.name = "ac97",
.enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2440_CLKCON_CAMERA,
+ .ctrlbit = S3C2440_CLKCON_AC97,
};
static unsigned long s3c2440_fclk_n_getrate(struct clk *clk)
help
This enables build of the TMU timer driver.
+config EM_TIMER_STI
+ bool "STI timer driver"
+ default y
+ help
+ This enables build of the STI timer driver.
+
endmenu
config SH_CLK_CPG
.init_irq = r8a7740_init_irq,
.handle_irq = shmobile_handle_irq_intc,
.init_machine = eva_init,
+ .init_late = shmobile_init_late,
.timer = &shmobile_timer,
.dt_compat = eva_boards_compat_dt,
MACHINE_END
.init_irq = emev2_init_irq,
.handle_irq = gic_handle_irq,
.init_machine = kzm9d_add_standard_devices,
+ .init_late = shmobile_init_late,
.timer = &shmobile_timer,
.dt_compat = kzm9d_boards_compat_dt,
MACHINE_END
.init_irq = sh73a0_init_irq,
.handle_irq = gic_handle_irq,
.init_machine = kzm_init,
+ .init_late = shmobile_init_late,
.timer = &shmobile_timer,
.dt_compat = kzm9g_boards_compat_dt,
MACHINE_END
gpio_request(GPIO_FN_SDHID0_1, NULL);
gpio_request(GPIO_FN_SDHID0_0, NULL);
+ /* SDHI0 PORT172 card-detect IRQ26 */
+ gpio_request(GPIO_FN_IRQ26_172, NULL);
+
#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
/* enable SDHI1 */
gpio_request(GPIO_FN_SDHICMD1, NULL);
enum { MSTP001,
MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100,
- MSTP219,
+ MSTP219, MSTP218,
MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
- MSTP331, MSTP329, MSTP325, MSTP323, MSTP318,
+ MSTP331, MSTP329, MSTP325, MSTP323,
MSTP314, MSTP313, MSTP312, MSTP311,
MSTP303, MSTP302, MSTP301, MSTP300,
MSTP411, MSTP410, MSTP403,
[MSTP116] = MSTP(&div4_clks[DIV4_HP], SMSTPCR1, 16, 0), /* IIC0 */
[MSTP100] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */
[MSTP219] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 19, 0), /* SCIFA7 */
+ [MSTP218] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* SY-DMAC */
[MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */
[MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */
[MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */
[MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
[MSTP325] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 25, 0), /* IrDA */
[MSTP323] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 23, 0), /* IIC1 */
- [MSTP318] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 18, 0), /* SY-DMAC */
[MSTP314] = MSTP(&div6_clks[DIV6_SDHI0], SMSTPCR3, 14, 0), /* SDHI0 */
[MSTP313] = MSTP(&div6_clks[DIV6_SDHI1], SMSTPCR3, 13, 0), /* SDHI1 */
[MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */
CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */
CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */
CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */
+ CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), /* SY-DMAC */
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */
CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* I2C1 */
- CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP318]), /* SY-DMAC */
CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */
#define INT2SMSKCR3 0xfe7822ac
#define INT2SMSKCR4 0xfe7822b0
+#define INT2NTSR0 0xfe700060
+#define INT2NTSR1 0xfe700064
+
static int r8a7779_set_wake(struct irq_data *data, unsigned int on)
{
return 0; /* always allow wakeup */
gic_init(0, 29, gic_dist_base, gic_cpu_base);
gic_arch_extn.irq_set_wake = r8a7779_set_wake;
+ /* route all interrupts to ARM */
+ __raw_writel(0xffffffff, INT2NTSR0);
+ __raw_writel(0x3fffffff, INT2NTSR1);
+
/* unmask all known interrupts in INTCS2 */
__raw_writel(0xfffffff0, INT2SMSKCR0);
__raw_writel(0xfff7ffff, INT2SMSKCR1);
#include <mach/common.h>
#include <mach/emev2.h>
+#ifdef CONFIG_ARCH_SH73A0
#define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2() || \
of_machine_is_compatible("renesas,sh73a0"))
+#else
+#define is_sh73a0() (0)
+#endif
+
#define is_r8a7779() machine_is_marzen()
+
+#ifdef CONFIG_ARCH_EMEV2
#define is_emev2() of_machine_is_compatible("renesas,emev2")
+#else
+#define is_emev2() (0)
+#endif
static unsigned int __init shmobile_smp_get_core_count(void)
{
},
};
-#define SH7372_CHCLR 0x220
+#define SH7372_CHCLR (0x220 - 0x20)
static const struct sh_dmae_channel sh7372_dmae_channels[] = {
{
* Debugging macro include header spear13xx machine family
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* DMA information for SPEAr13xx machine family
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* spear13xx machine family generic header file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* GPIO macros for SPEAr13xx machine family
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* IRQ helper macros for spear13xx machine family
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* spear13xx Machine family specific definition
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr3XX machine family specific timex definitions
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* Serial port stubs for kernel decompress status messages
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr1310 machine source file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr1340 machine source file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr13XX machines common source file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* Debugging macro include header spear3xx machine family
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar<viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr3XX machine family generic header file
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar<viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* GPIO macros for SPEAr3xx machine family
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar<viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* IRQ helper macros for SPEAr3xx machine family
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* Miscellaneous registers definitions for SPEAr3xx machine family
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr3xx Machine family specific definition
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr3XX machine family specific timex definitions
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* Serial port stubs for kernel decompress status messages
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr300 machine source file
*
* Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr310 machine source file
*
* Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr320 machine source file
*
* Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr3XX machines common source file
*
* Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
static void __init spear3xx_timer_init(void)
{
- char pclk_name[] = "pll3_48m_clk";
+ char pclk_name[] = "pll3_clk";
struct clk *gpt_clk, *pclk;
spear3xx_clk_init();
* GPIO macros for SPEAr6xx machine family
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* Miscellaneous registers definitions for SPEAr6xx machine family
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
static void __init spear6xx_timer_init(void)
{
- char pclk_name[] = "pll3_48m_clk";
+ char pclk_name[] = "pll3_clk";
struct clk *gpt_clk, *pclk;
spear6xx_clk_init();
static bool is_enabled;
-static void tegra_cpu_reset_handler_enable(void)
+static void __init tegra_cpu_reset_handler_enable(void)
{
void __iomem *iram_base = IO_ADDRESS(TEGRA_IRAM_RESET_BASE);
void __iomem *evp_cpu_reset =
udelay(1);
}
-/* This needs to be referenced by callbacks */
-struct pinctrl *u0_p;
-struct pinctrl_state *u0_def;
-struct pinctrl_state *u0_sleep;
-
-static void ux500_uart0_init(void)
-{
- int ret;
-
- if (IS_ERR(u0_p) || IS_ERR(u0_def))
- return;
-
- ret = pinctrl_select_state(u0_p, u0_def);
- if (ret)
- pr_err("could not set UART0 defstate\n");
-}
-
-static void ux500_uart0_exit(void)
-{
- int ret;
-
- if (IS_ERR(u0_p) || IS_ERR(u0_sleep))
- return;
-
- ret = pinctrl_select_state(u0_p, u0_sleep);
- if (ret)
- pr_err("could not set UART0 idlestate\n");
-}
-
static struct amba_pl011_data uart0_plat = {
#ifdef CONFIG_STE_DMA40
.dma_filter = stedma40_filter,
.dma_rx_param = &uart0_dma_cfg_rx,
.dma_tx_param = &uart0_dma_cfg_tx,
#endif
- .init = ux500_uart0_init,
- .exit = ux500_uart0_exit,
.reset = ux500_uart0_reset,
};
static void __init mop500_uart_init(struct device *parent)
{
- struct amba_device *uart0_device;
-
- uart0_device = db8500_add_uart0(parent, &uart0_plat);
- if (uart0_device) {
- u0_p = pinctrl_get(&uart0_device->dev);
- if (IS_ERR(u0_p))
- dev_err(&uart0_device->dev,
- "could not get UART0 pinctrl\n");
- else {
- u0_def = pinctrl_lookup_state(u0_p,
- PINCTRL_STATE_DEFAULT);
- if (IS_ERR(u0_def)) {
- dev_err(&uart0_device->dev,
- "could not get UART0 defstate\n");
- }
- u0_sleep = pinctrl_lookup_state(u0_p,
- PINCTRL_STATE_SLEEP);
- if (IS_ERR(u0_sleep))
- dev_err(&uart0_device->dev,
- "could not get UART0 idlestate\n");
- }
- }
+ db8500_add_uart0(parent, &uart0_plat);
db8500_add_uart1(parent, &uart1_plat);
db8500_add_uart2(parent, &uart2_plat);
}
&ab8500_device,
};
-static struct platform_device *snowball_of_platform_devs[] __initdata = {
- &snowball_led_dev,
- &snowball_key_dev,
-};
-
static void __init mop500_init_machine(void)
{
struct device *parent = NULL;
#ifdef CONFIG_MACH_UX500_DT
+static struct platform_device *snowball_of_platform_devs[] __initdata = {
+ &snowball_led_dev,
+ &snowball_key_dev,
+};
+
struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
/* Requires DMA and call-back bindings. */
OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat),
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL),
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL),
OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL),
+ /* Requires device name bindings. */
+ OF_DEV_AUXDATA("stericsson,nmk_pinctrl", 0, "pinctrl-db8500", NULL),
{},
};
/* TODO: Once MTU has been DT:ed place code above into else. */
if (of_have_populated_dt()) {
+#ifdef CONFIG_OF
np = of_find_matching_node(NULL, prcmu_timer_of_match);
if (!np)
+#endif
goto dt_fail;
tmp_base = of_iomap(np, 0);
.pfn = __phys_to_pfn(VERSATILE_PCI_CFG_BASE),
.length = VERSATILE_PCI_CFG_BASE_SIZE,
.type = MT_DEVICE
- },
-#if 0
- {
- .virtual = VERSATILE_PCI_VIRT_MEM_BASE0,
- .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE0),
- .length = SZ_16M,
- .type = MT_DEVICE
}, {
- .virtual = VERSATILE_PCI_VIRT_MEM_BASE1,
- .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE1),
- .length = SZ_16M,
- .type = MT_DEVICE
- }, {
- .virtual = VERSATILE_PCI_VIRT_MEM_BASE2,
- .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE2),
- .length = SZ_16M,
+ .virtual = (unsigned long)VERSATILE_PCI_VIRT_MEM_BASE0,
+ .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE0),
+ .length = IO_SPACE_LIMIT,
.type = MT_DEVICE
},
#endif
-#endif
};
void __init versatile_map_io(void)
*/
#define VERSATILE_PCI_VIRT_BASE (void __iomem *)0xe8000000ul
#define VERSATILE_PCI_CFG_VIRT_BASE (void __iomem *)0xe9000000ul
+#define VERSATILE_PCI_VIRT_MEM_BASE0 (void __iomem *)PCIO_BASE
-/* macro to get at IO space when running virtually */
+/* macro to get at MMIO space when running virtually */
#define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
#define __io_address(n) ((void __iomem __force *)IO_ADDRESS(n))
--- /dev/null
+/*
+ * arch/arm/mach-versatile/include/mach/io.h
+ *
+ * Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define PCIO_BASE 0xeb000000ul
+
+#define __io(a) ((a) + PCIO_BASE)
+
+#endif
.write = versatile_write_config,
};
+static struct resource io_port = {
+ .name = "PCI",
+ .start = 0,
+ .end = IO_SPACE_LIMIT,
+ .flags = IORESOURCE_IO,
+};
+
static struct resource io_mem = {
.name = "PCI I/O space",
.start = VERSATILE_PCI_MEM_BASE0,
.end = VERSATILE_PCI_MEM_BASE0+VERSATILE_PCI_MEM_BASE0_SIZE-1,
- .flags = IORESOURCE_IO,
+ .flags = IORESOURCE_MEM,
};
static struct resource non_mem = {
"memory region (%d)\n", ret);
goto out;
}
+ ret = request_resource(&ioport_resource, &io_port);
+ if (ret) {
+ printk(KERN_ERR "PCI: unable to allocate I/O "
+ "port region (%d)\n", ret);
+ goto out;
+ }
ret = request_resource(&iomem_resource, &non_mem);
if (ret) {
printk(KERN_ERR "PCI: unable to allocate non-prefetchable "
* the mem resource for this bus
* the prefetch mem resource for this bus
*/
- pci_add_resource_offset(&sys->resources, &io_mem, sys->io_offset);
+ pci_add_resource_offset(&sys->resources, &io_port, sys->io_offset);
pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset);
pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset);
if (nr == 0) {
sys->mem_offset = 0;
+ sys->io_offset = 0;
ret = pci_versatile_setup_resources(sys);
if (ret < 0) {
printk("pci_versatile_setup: resources... oops?\n");
static int __init versatile_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int irq;
- int devslot = PCI_SLOT(dev->devfn);
/* slot, pin, irq
* 24 1 27
#define DEFAULT_CONSISTENT_DMA_SIZE SZ_2M
-unsigned long consistent_base = CONSISTENT_END - DEFAULT_CONSISTENT_DMA_SIZE;
+static unsigned long consistent_base = CONSISTENT_END - DEFAULT_CONSISTENT_DMA_SIZE;
void __init init_consistent_dma_size(unsigned long size)
{
unsigned long base = consistent_base;
unsigned long num_ptes = (CONSISTENT_END - base) >> PMD_SHIFT;
-#ifndef CONFIG_ARM_DMA_USE_IOMMU
- if (cpu_architecture() >= CPU_ARCH_ARMv6)
+ if (IS_ENABLED(CONFIG_CMA) && !IS_ENABLED(CONFIG_ARM_DMA_USE_IOMMU))
return 0;
-#endif
consistent_pte = kmalloc(num_ptes * sizeof(pte_t), GFP_KERNEL);
if (!consistent_pte) {
.vm_list = LIST_HEAD_INIT(coherent_head.vm_list),
};
-size_t coherent_pool_size = DEFAULT_CONSISTENT_DMA_SIZE / 8;
+static size_t coherent_pool_size = DEFAULT_CONSISTENT_DMA_SIZE / 8;
static int __init early_coherent_pool(char *p)
{
struct page *page;
void *ptr;
- if (cpu_architecture() < CPU_ARCH_ARMv6)
+ if (!IS_ENABLED(CONFIG_CMA))
return 0;
ptr = __alloc_from_contiguous(NULL, size, prot, &page);
if (arch_is_coherent() || nommu())
addr = __alloc_simple_buffer(dev, size, gfp, &page);
- else if (cpu_architecture() < CPU_ARCH_ARMv6)
+ else if (!IS_ENABLED(CONFIG_CMA))
addr = __alloc_remap_buffer(dev, size, gfp, prot, &page, caller);
else if (gfp & GFP_ATOMIC)
addr = __alloc_from_pool(dev, size, &page, caller);
if (arch_is_coherent() || nommu()) {
__dma_free_buffer(page, size);
- } else if (cpu_architecture() < CPU_ARCH_ARMv6) {
+ } else if (!IS_ENABLED(CONFIG_CMA)) {
__dma_free_remap(cpu_addr, size);
__dma_free_buffer(page, size);
} else {
return NULL;
while (count) {
- int j, order = __ffs(count);
+ int j, order = __fls(count);
pages[i] = alloc_pages(gfp | __GFP_NOWARN, order);
while (!pages[i] && order)
while (--i)
if (pages[i])
__free_pages(pages[i], 0);
- if (array_size < PAGE_SIZE)
+ if (array_size <= PAGE_SIZE)
kfree(pages);
else
vfree(pages);
for (i = 0; i < count; i++)
if (pages[i])
__free_pages(pages[i], 0);
- if (array_size < PAGE_SIZE)
+ if (array_size <= PAGE_SIZE)
kfree(pages);
else
vfree(pages);
* allocations. This must be the smallest DMA mask in the system,
* so a successful GFP_DMA allocation will always satisfy this.
*/
-u32 arm_dma_limit;
+phys_addr_t arm_dma_limit;
static void __init arm_adjust_dma_zone(unsigned long *size, unsigned long *hole,
unsigned long dma_size)
#endif
#ifdef CONFIG_ZONE_DMA
-extern u32 arm_dma_limit;
+extern phys_addr_t arm_dma_limit;
#else
-#define arm_dma_limit ((u32)~0)
+#define arm_dma_limit ((phys_addr_t)~0)
#endif
extern phys_addr_t arm_lowmem_limit;
}
}
+#ifndef CONFIG_ARM_LPAE
+
+/*
+ * The Linux PMD is made of two consecutive section entries covering 2MB
+ * (see definition in include/asm/pgtable-2level.h). However a call to
+ * create_mapping() may optimize static mappings by using individual
+ * 1MB section mappings. This leaves the actual PMD potentially half
+ * initialized if the top or bottom section entry isn't used, leaving it
+ * open to problems if a subsequent ioremap() or vmalloc() tries to use
+ * the virtual space left free by that unused section entry.
+ *
+ * Let's avoid the issue by inserting dummy vm entries covering the unused
+ * PMD halves once the static mappings are in place.
+ */
+
+static void __init pmd_empty_section_gap(unsigned long addr)
+{
+ struct vm_struct *vm;
+
+ vm = early_alloc_aligned(sizeof(*vm), __alignof__(*vm));
+ vm->addr = (void *)addr;
+ vm->size = SECTION_SIZE;
+ vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING;
+ vm->caller = pmd_empty_section_gap;
+ vm_area_add_early(vm);
+}
+
+static void __init fill_pmd_gaps(void)
+{
+ struct vm_struct *vm;
+ unsigned long addr, next = 0;
+ pmd_t *pmd;
+
+ /* we're still single threaded hence no lock needed here */
+ for (vm = vmlist; vm; vm = vm->next) {
+ if (!(vm->flags & VM_ARM_STATIC_MAPPING))
+ continue;
+ addr = (unsigned long)vm->addr;
+ if (addr < next)
+ continue;
+
+ /*
+ * Check if this vm starts on an odd section boundary.
+ * If so and the first section entry for this PMD is free
+ * then we block the corresponding virtual address.
+ */
+ if ((addr & ~PMD_MASK) == SECTION_SIZE) {
+ pmd = pmd_off_k(addr);
+ if (pmd_none(*pmd))
+ pmd_empty_section_gap(addr & PMD_MASK);
+ }
+
+ /*
+ * Then check if this vm ends on an odd section boundary.
+ * If so and the second section entry for this PMD is empty
+ * then we block the corresponding virtual address.
+ */
+ addr += vm->size;
+ if ((addr & ~PMD_MASK) == SECTION_SIZE) {
+ pmd = pmd_off_k(addr) + 1;
+ if (pmd_none(*pmd))
+ pmd_empty_section_gap(addr);
+ }
+
+ /* no need to look at any vm entry until we hit the next PMD */
+ next = (addr + PMD_SIZE - 1) & PMD_MASK;
+ }
+}
+
+#else
+#define fill_pmd_gaps() do { } while (0)
+#endif
+
static void * __initdata vmalloc_min =
(void *)(VMALLOC_END - (240 << 20) - VMALLOC_OFFSET);
*/
if (mdesc->map_io)
mdesc->map_io();
+ fill_pmd_gaps();
/*
* Finally flush the caches and tlb to ensure that we're in a
update_on_xread(ctx);
emit(ARM_MOV_R(r_A, r_X), ctx);
break;
+ case BPF_S_ANC_ALU_XOR_X:
+ /* A ^= X */
+ update_on_xread(ctx);
+ emit(ARM_EOR_R(r_A, r_A, r_X), ctx);
+ break;
case BPF_S_ANC_PROTOCOL:
/* A = ntohs(skb->protocol) */
ctx->seen |= SEEN_SKB;
#define ARM_INST_CMP_R 0x01500000
#define ARM_INST_CMP_I 0x03500000
+#define ARM_INST_EOR_R 0x00200000
+
#define ARM_INST_LDRB_I 0x05d00000
#define ARM_INST_LDRB_R 0x07d00000
#define ARM_INST_LDRH_I 0x01d000b0
#define ARM_CMP_R(rn, rm) _AL3_R(ARM_INST_CMP, 0, rn, rm)
#define ARM_CMP_I(rn, imm) _AL3_I(ARM_INST_CMP, 0, rn, imm)
+#define ARM_EOR_R(rd, rn, rm) _AL3_R(ARM_INST_EOR, rd, rn, rm)
+
#define ARM_LDR_I(rt, rn, off) (ARM_INST_LDR_I | (rt) << 12 | (rn) << 16 \
| (off))
#define ARM_LDRB_I(rt, rn, off) (ARM_INST_LDRB_I | (rt) << 12 | (rn) << 16 \
#include <linux/irq.h>
#include <linux/clockchips.h>
#include <linux/clk.h>
+#include <linux/err.h>
#include <mach/hardware.h>
#include <asm/mach/time.h>
return 0;
}
-void __init epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
+void __init epit_timer_init(void __iomem *base, int irq)
{
+ struct clk *timer_clk;
+
+ timer_clk = clk_get_sys("imx-epit.0", NULL);
+ if (IS_ERR(timer_clk)) {
+ pr_err("i.MX epit: unable to get clk\n");
+ return;
+ }
+
clk_prepare_enable(timer_clk);
timer_base = base;
extern void imx51_soc_init(void);
extern void imx53_soc_init(void);
extern void imx51_init_late(void);
-extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq);
-extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
+extern void epit_timer_init(void __iomem *base, int irq);
+extern void mxc_timer_init(void __iomem *, int);
extern int mx1_clocks_init(unsigned long fref);
extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
extern int mx25_clocks_init(void);
#ifndef __MACH_MX2_CAM_H_
#define __MACH_MX2_CAM_H_
+#define MX2_CAMERA_SWAP16 (1 << 0)
#define MX2_CAMERA_EXT_VSYNC (1 << 1)
#define MX2_CAMERA_CCIR (1 << 2)
#define MX2_CAMERA_CCIR_INTERLACE (1 << 3)
#define MX2_CAMERA_GATED_CLOCK (1 << 5)
#define MX2_CAMERA_INV_DATA (1 << 6)
#define MX2_CAMERA_PCLK_SAMPLE_RISING (1 << 7)
+#define MX2_CAMERA_PACK_DIR_MSB (1 << 8)
/**
* struct mx2_camera_platform_data - optional platform data for mx2_camera
/* MX31, MX35, MX25, MX5 */
#define V2_TCTL_WAITEN (1 << 3) /* Wait enable mode */
#define V2_TCTL_CLK_IPG (1 << 6)
+#define V2_TCTL_CLK_PER (2 << 6)
#define V2_TCTL_FRR (1 << 9)
#define V2_IR 0x0c
#define V2_TSTAT 0x08
return 0;
}
-void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
+void __init mxc_timer_init(void __iomem *base, int irq)
{
uint32_t tctl_val;
+ struct clk *timer_clk;
struct clk *timer_ipg_clk;
- if (!timer_clk) {
- timer_clk = clk_get_sys("imx-gpt.0", "per");
- if (IS_ERR(timer_clk)) {
- pr_err("i.MX timer: unable to get clk\n");
- return;
- }
-
- timer_ipg_clk = clk_get_sys("imx-gpt.0", "ipg");
- if (!IS_ERR(timer_ipg_clk))
- clk_prepare_enable(timer_ipg_clk);
+ timer_clk = clk_get_sys("imx-gpt.0", "per");
+ if (IS_ERR(timer_clk)) {
+ pr_err("i.MX timer: unable to get clk\n");
+ return;
}
+ timer_ipg_clk = clk_get_sys("imx-gpt.0", "ipg");
+ if (!IS_ERR(timer_ipg_clk))
+ clk_prepare_enable(timer_ipg_clk);
+
clk_prepare_enable(timer_clk);
timer_base = base;
__raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
if (timer_is_v2())
- tctl_val = V2_TCTL_CLK_IPG | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN;
+ tctl_val = V2_TCTL_CLK_PER | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN;
else
tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
struct clk *c;
struct clk *pa;
+ mutex_lock(&clocks_mutex);
seq_printf(s, "%-30s %-30s %-10s %s\n",
"clock-name", "parent-name", "rate", "use-count");
seq_printf(s, "%-30s %-30s %-10lu %d\n",
c->name, pa ? pa->name : "none", c->rate, c->usecount);
}
+ mutex_unlock(&clocks_mutex);
return 0;
}
* cpu_is_omap2423(): True for OMAP2423
* cpu_is_omap2430(): True for OMAP2430
* cpu_is_omap3430(): True for OMAP3430
- * cpu_is_omap3505(): True for OMAP3505
- * cpu_is_omap3517(): True for OMAP3517
*/
#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff)
IS_OMAP_TYPE(2423, 0x2423)
IS_OMAP_TYPE(2430, 0x2430)
IS_OMAP_TYPE(3430, 0x3430)
-IS_OMAP_TYPE(3505, 0x3517)
-IS_OMAP_TYPE(3517, 0x3517)
#define cpu_is_omap310() 0
#define cpu_is_omap730() 0
#define cpu_is_omap2422() 0
#define cpu_is_omap2423() 0
#define cpu_is_omap2430() 0
-#define cpu_is_omap3503() 0
-#define cpu_is_omap3515() 0
-#define cpu_is_omap3525() 0
-#define cpu_is_omap3530() 0
-#define cpu_is_omap3505() 0
-#define cpu_is_omap3517() 0
#define cpu_is_omap3430() 0
#define cpu_is_omap3630() 0
#if defined(CONFIG_ARCH_OMAP3)
# undef cpu_is_omap3430
-# undef cpu_is_omap3503
-# undef cpu_is_omap3515
-# undef cpu_is_omap3525
-# undef cpu_is_omap3530
-# undef cpu_is_omap3505
-# undef cpu_is_omap3517
# undef cpu_is_ti81xx
# undef cpu_is_ti816x
# undef cpu_is_ti814x
# undef cpu_is_am33xx
# undef cpu_is_am335x
# define cpu_is_omap3430() is_omap3430()
-# define cpu_is_omap3503() (cpu_is_omap3430() && \
- (!omap3_has_iva()) && \
- (!omap3_has_sgx()))
-# define cpu_is_omap3515() (cpu_is_omap3430() && \
- (!omap3_has_iva()) && \
- (omap3_has_sgx()))
-# define cpu_is_omap3525() (cpu_is_omap3430() && \
- (!omap3_has_sgx()) && \
- (omap3_has_iva()))
-# define cpu_is_omap3530() (cpu_is_omap3430())
-# define cpu_is_omap3517() is_omap3517()
-# define cpu_is_omap3505() (cpu_is_omap3517() && \
- !omap3_has_sgx())
# undef cpu_is_omap3630
# define cpu_is_omap3630() is_omap363x()
# define cpu_is_ti81xx() is_ti81xx()
#define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (0x1 << 8))
#define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (0x2 << 8))
-#define OMAP3517_CLASS 0x35170034
-#define OMAP3517_REV_ES1_0 OMAP3517_CLASS
-#define OMAP3517_REV_ES1_1 (OMAP3517_CLASS | (0x1 << 8))
-
#define TI816X_CLASS 0x81600034
#define TI8168_REV_ES1_0 TI816X_CLASS
#define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8))
extern void omap_mmc_notify_cover_event(struct device *dev, int slot,
int is_closed);
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
- defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
int nr_controllers);
void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data);
static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
{
}
-
#endif
extern int omap_msdi_reset(struct omap_hwmod *oh);
* Watchdog
****************************************************************************/
static struct resource orion_wdt_resource =
- DEFINE_RES_MEM(TIMER_VIRT_BASE, 0x28);
+ DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x28);
static struct platform_device orion_wdt_device = {
.name = "orion_wdt",
{ "pxa25x-nssp", PXA25x_NSSP },
{ "pxa27x-ssp", PXA27x_SSP },
{ "pxa168-ssp", PXA168_SSP },
+ { "pxa910-ssp", PXA910_SSP },
{ },
};
return -EINVAL;
}
- if (client->is_ts && adc->ts_pend)
- return -EAGAIN;
-
spin_lock_irqsave(&adc->lock, flags);
+ if (client->is_ts && adc->ts_pend) {
+ spin_unlock_irqrestore(&adc->lock, flags);
+ return -EAGAIN;
+ }
+
client->channel = channel;
client->nr_samples = nr_samples;
#ifdef CONFIG_CPU_S3C2440
static struct resource s3c_camif_resource[] = {
[0] = DEFINE_RES_MEM(S3C2440_PA_CAMIF, S3C2440_SZ_CAMIF),
- [1] = DEFINE_RES_IRQ(IRQ_CAM),
+ [1] = DEFINE_RES_IRQ(IRQ_S3C2440_CAM_C),
+ [2] = DEFINE_RES_IRQ(IRQ_S3C2440_CAM_P),
};
struct platform_device s3c_device_camif = {
#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
#define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000)
-#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00010000)
+#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00100000)
#define S3C2410_PA_UART (0x50000000)
#define S3C24XX_PA_UART S3C2410_PA_UART
__raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */
- if (s3c2410_wdtclk)
+ if (!IS_ERR(s3c2410_wdtclk))
clk_enable(s3c2410_wdtclk);
/* put initial values into count and data */
struct clk clk_xusbxti = {
.name = "xusbxti",
.id = -1,
+ .rate = 24000000,
};
struct clk s5p_clk_27m = {
* Debugging macro include header for spear platform
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* DMAC pl080 definitions for SPEAr platform
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr platform shared irq layer header file
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr platform specific timex definitions
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* Serial port stubs for kernel decompress status messages
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* DMAC pl080 definitions for SPEAr platform
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr platform specific restart functions
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr platform shared irq layer source file
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
if ((sysreg_read(SR) & MODE_MASK) == MODE_SUPERVISOR)
syscall = 1;
- if (ti->flags & _TIF_SIGPENDING))
+ if (ti->flags & _TIF_SIGPENDING)
do_signal(regs, syscall);
if (ti->flags & _TIF_NOTIFY_RESUME) {
unsigned long newsp;
#ifdef __ARCH_SYNC_CORE_DCACHE
- if (current->rt.nr_cpus_allowed == num_possible_cpus())
+ if (current->nr_cpus_allowed == num_possible_cpus())
set_cpus_allowed_ptr(current, cpumask_of(smp_processor_id()));
#endif
#define VMALLOC_END 0xffffffff
#define arch_enter_lazy_cpu_mode() do {} while (0)
+
+#include <asm-generic/pgtable.h>
+
#endif /* _H8300_PGTABLE_H */
break; \
default: \
__gu_err = __get_user_bad(); \
- __gu_val = 0; \
break; \
} \
(x) = __gu_val; \
return 0;
}
+#define __clear_user clear_user
+
#endif /* _H8300_UACCESS_H */
#include <asm/setup.h>
#include <asm/irq.h>
#include <asm/pgtable.h>
+#include <asm/sections.h>
#if defined(__H8300H__)
#define CPU "H8/300H"
char __initdata command_line[COMMAND_LINE_SIZE];
-extern int _stext, _etext, _sdata, _edata, _sbss, _ebss, _end;
extern int _ramstart, _ramend;
extern char _target_name[];
extern void h8300_gpio_init(void);
memory_end = CONFIG_BLKDEV_RESERVE_ADDRESS;
#endif
- init_mm.start_code = (unsigned long) &_stext;
- init_mm.end_code = (unsigned long) &_etext;
- init_mm.end_data = (unsigned long) &_edata;
+ init_mm.start_code = (unsigned long) _stext;
+ init_mm.end_code = (unsigned long) _etext;
+ init_mm.end_data = (unsigned long) _edata;
init_mm.brk = (unsigned long) 0;
#if (defined(CONFIG_H8300H_SIM) || defined(CONFIG_H8S_SIM)) && defined(CONFIG_GDB_MAGICPRINT)
printk(KERN_INFO "H8/300 series support by Yoshinori Sato <ysato@users.sourceforge.jp>\n");
#ifdef DEBUG
- printk(KERN_DEBUG "KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x "
- "BSS=0x%06x-0x%06x\n", (int) &_stext, (int) &_etext,
- (int) &_sdata, (int) &_edata,
- (int) &_sbss, (int) &_ebss);
- printk(KERN_DEBUG "KERNEL -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x "
- "STACK=0x%06x-0x%06x\n",
- (int) &_ebss, (int) memory_start,
- (int) memory_start, (int) memory_end,
- (int) memory_end, (int) &_ramend);
+ printk(KERN_DEBUG "KERNEL -> TEXT=0x%p-0x%p DATA=0x%p-0x%p "
+ "BSS=0x%p-0x%p\n", _stext, _etext, _sdata, _edata, __bss_start,
+ __bss_stop);
+ printk(KERN_DEBUG "KERNEL -> ROMFS=0x%p-0x%06lx MEM=0x%06lx-0x%06lx "
+ "STACK=0x%06lx-0x%p\n", __bss_stop, memory_start, memory_start,
+ memory_end, memory_end, &_ramend);
#endif
#ifdef CONFIG_DEFAULT_CMDLINE
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*/
-statis void do_signal(struct pt_regs *regs)
+static void do_signal(struct pt_regs *regs)
{
siginfo_t info;
int signr;
#include <linux/profile.h>
#include <asm/io.h>
+#include <asm/irq_regs.h>
#include <asm/timer.h>
#define TICK_SIZE (tick_nsec / 1000)
#include <asm/segment.h>
#include <asm/page.h>
#include <asm/pgtable.h>
+#include <asm/sections.h>
#undef DEBUG
int codek = 0, datak = 0, initk = 0;
/* DAVIDM look at setup memory map generically with reserved area */
unsigned long tmp;
- extern char _etext, _stext, _sdata, _ebss, __init_begin, __init_end;
extern unsigned long _ramend, _ramstart;
unsigned long len = &_ramend - &_ramstart;
unsigned long start_mem = memory_start; /* DAVIDM - these must start at end of kernel */
/* this will put all memory onto the freelists */
totalram_pages = free_all_bootmem();
- codek = (&_etext - &_stext) >> 10;
- datak = (&_ebss - &_sdata) >> 10;
- initk = (&__init_begin - &__init_end) >> 10;
+ codek = (_etext - _stext) >> 10;
+ datak = (__bss_stop - _sdata) >> 10;
+ initk = (__init_begin - __init_end) >> 10;
tmp = nr_free_pages() << PAGE_SHIFT;
printk(KERN_INFO "Memory available: %luk/%luk RAM, %luk/%luk ROM (%dk kernel code, %dk data)\n",
{
#ifdef CONFIG_RAMKERNEL
unsigned long addr;
- extern char __init_begin, __init_end;
/*
* the following code should be cool even if these sections
* are not page aligned.
*/
- addr = PAGE_ALIGN((unsigned long)(&__init_begin));
+ addr = PAGE_ALIGN((unsigned long)(__init_begin));
/* next to check that the page we free is not a partial page */
- for (; addr + PAGE_SIZE < (unsigned long)(&__init_end); addr +=PAGE_SIZE) {
+ for (; addr + PAGE_SIZE < (unsigned long)__init_end; addr +=PAGE_SIZE) {
ClearPageReserved(virt_to_page(addr));
init_page_count(virt_to_page(addr));
free_page(addr);
totalram_pages++;
}
printk(KERN_INFO "Freeing unused kernel memory: %ldk freed (0x%x - 0x%x)\n",
- (addr - PAGE_ALIGN((long) &__init_begin)) >> 10,
- (int)(PAGE_ALIGN((unsigned long)(&__init_begin))),
+ (addr - PAGE_ALIGN((long) __init_begin)) >> 10,
+ (int)(PAGE_ALIGN((unsigned long)__init_begin)),
(int)(addr - PAGE_SIZE));
#endif
}
OBJCOPYFLAGS += -R .empty_zero_page
-suffix_$(CONFIG_KERNEL_GZIP) = gz
-suffix_$(CONFIG_KERNEL_BZIP2) = bz2
-suffix_$(CONFIG_KERNEL_LZMA) = lzma
+suffix-$(CONFIG_KERNEL_GZIP) = gz
+suffix-$(CONFIG_KERNEL_BZIP2) = bz2
+suffix-$(CONFIG_KERNEL_LZMA) = lzma
$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix-y) FORCE
$(call if_changed,ld)
static unsigned long free_mem_end_ptr;
#ifdef CONFIG_KERNEL_BZIP2
-static void *memset(void *s, int c, size_t n)
+void *memset(void *s, int c, size_t n)
{
char *ss = s;
#endif
#ifdef CONFIG_KERNEL_GZIP
+void *memcpy(void *dest, const void *src, size_t n)
+{
+ char *d = dest;
+ const char *s = src;
+ while (n--)
+ *d++ = *s++;
+
+ return dest;
+}
+
#define BOOT_HEAP_SIZE 0x10000
#include "../../../../lib/decompress_inflate.c"
#endif
#define PTRACE_OLDSETOPTIONS 21
-/* options set using PTRACE_SETOPTIONS */
-#define PTRACE_O_TRACESYSGOOD 0x00000001
-
#ifdef __KERNEL__
#include <asm/m32r.h> /* M32R_PSW_BSM, M32R_PSW_BPM */
if (access_process_vm(child, pc&~3, &insn, sizeof(insn), 0)
!= sizeof(insn))
- return -EIO;
+ return;
compute_next_pc(insn, pc, &next_pc, child);
if (next_pc & 0x80000000)
- return -EIO;
+ return;
if (embed_debug_trap(child, next_pc))
- return -EIO;
+ return;
invalidate_cache();
- return 0;
}
void user_disable_single_step(struct task_struct *child)
case -ERESTARTNOINTR:
regs->r0 = regs->orig_r0;
if (prev_insn(regs) < 0)
- return -EFAULT;
+ return;
}
}
select GENERIC_IRQ_SHOW
select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS
select GENERIC_CPU_DEVICES
+ select GENERIC_STRNCPY_FROM_USER if MMU
+ select GENERIC_STRNLEN_USER if MMU
select FPU if MMU
select ARCH_USES_GETTIMEOFFSET if MMU && !COLDFIRE
include include/asm-generic/Kbuild.asm
header-y += cachectl.h
+
+generic-y += word-at-a-time.h
/*
* QSPI module.
*/
-#define MCFQSPI_IOBASE (MCF_IPSBAR + 0x340)
+#define MCFQSPI_BASE (MCF_IPSBAR + 0x340)
#define MCFQSPI_SIZE 0x40
#define MCFQSPI_CS0 147
#define copy_from_user(to, from, n) __copy_from_user(to, from, n)
#define copy_to_user(to, from, n) __copy_to_user(to, from, n)
-long strncpy_from_user(char *dst, const char __user *src, long count);
-long strnlen_user(const char __user *src, long n);
+#define user_addr_max() \
+ (segment_eq(get_fs(), USER_DS) ? TASK_SIZE : ~0UL)
+
+extern long strncpy_from_user(char *dst, const char __user *src, long count);
+extern __must_check long strlen_user(const char __user *str);
+extern __must_check long strnlen_user(const char __user *str, long n);
+
unsigned long __clear_user(void __user *to, unsigned long n);
#define clear_user __clear_user
-#define strlen_user(str) strnlen_user(str, 32767)
-
#endif /* _M68K_UACCESS_H */
}
}
-#ifdef CONFIG_COLDFIRE
+#if defined(CONFIG_COLDFIRE) || !defined(CONFIG_MMU)
asmlinkage int syscall_trace_enter(void)
{
int ret = 0;
mach_sched_init(timer_interrupt);
}
-#ifdef CONFIG_M68KCLASSIC
+#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
u32 arch_gettimeoffset(void)
{
module_init(rtc_init);
-#endif /* CONFIG_M68KCLASSIC */
+#endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */
}
EXPORT_SYMBOL(__generic_copy_to_user);
-/*
- * Copy a null terminated string from userspace.
- */
-long strncpy_from_user(char *dst, const char __user *src, long count)
-{
- long res;
- char c;
-
- if (count <= 0)
- return count;
-
- asm volatile ("\n"
- "1: "MOVES".b (%2)+,%4\n"
- " move.b %4,(%1)+\n"
- " jeq 2f\n"
- " subq.l #1,%3\n"
- " jne 1b\n"
- "2: sub.l %3,%0\n"
- "3:\n"
- " .section .fixup,\"ax\"\n"
- " .even\n"
- "10: move.l %5,%0\n"
- " jra 3b\n"
- " .previous\n"
- "\n"
- " .section __ex_table,\"a\"\n"
- " .align 4\n"
- " .long 1b,10b\n"
- " .previous"
- : "=d" (res), "+a" (dst), "+a" (src), "+r" (count), "=&d" (c)
- : "i" (-EFAULT), "0" (count));
-
- return res;
-}
-EXPORT_SYMBOL(strncpy_from_user);
-
-/*
- * Return the size of a string (including the ending 0)
- *
- * Return 0 on exception, a value greater than N if too long
- */
-long strnlen_user(const char __user *src, long n)
-{
- char c;
- long res;
-
- asm volatile ("\n"
- "1: subq.l #1,%1\n"
- " jmi 3f\n"
- "2: "MOVES".b (%0)+,%2\n"
- " tst.b %2\n"
- " jne 1b\n"
- " jra 4f\n"
- "\n"
- "3: addq.l #1,%0\n"
- "4: sub.l %4,%0\n"
- "5:\n"
- " .section .fixup,\"ax\"\n"
- " .even\n"
- "20: sub.l %0,%0\n"
- " jra 5b\n"
- " .previous\n"
- "\n"
- " .section __ex_table,\"a\"\n"
- " .align 4\n"
- " .long 2b,20b\n"
- " .previous\n"
- : "=&a" (res), "+d" (n), "=&d" (c)
- : "0" (src), "r" (src));
-
- return res;
-}
-EXPORT_SYMBOL(strnlen_user);
-
/*
* Zero Userspace
*/
#endif
static u32 m68328_tick_cnt;
+static irq_handler_t timer_interrupt;
/***************************************************************************/
TSTAT &= 0;
m68328_tick_cnt += TICKS_PER_JIFFY;
- return arch_timer_interrupt(irq, dummy);
+ return timer_interrupt(irq, dummy);
}
/***************************************************************************/
/***************************************************************************/
-void hw_timer_init(void)
+void hw_timer_init(irq_handler_t handler)
{
/* disable timer 1 */
TCTL = 0;
/* Enable timer 1 */
TCTL |= TCTL_TEN;
clocksource_register_hz(&m68328_clk, TICKS_PER_JIFFY*HZ);
+ timer_interrupt = handler;
}
/***************************************************************************/
#define OSCILLATOR (unsigned long int)33000000
#endif
+static irq_handler_t timer_interrupt;
unsigned long int system_clock;
extern QUICC *pquicc;
pquicc->timer_ter1 = 0x0002; /* clear timer event */
- return arch_timer_interrupt(irq, dummy);
+ return timer_interrupt(irq, dummy);
}
static struct irqaction m68360_timer_irq = {
.handler = hw_tick,
};
-void hw_timer_init(void)
+void hw_timer_init(irq_handler_t handler)
{
unsigned char prescaler;
unsigned short tgcr_save;
pquicc->timer_ter1 = 0x0003; /* clear timer events */
+ timer_interrupt = handler;
+
/* enable timer 1 interrupt in CIMR */
setup_irq(CPMVEC_TIMER1, &m68360_timer_irq);
return MCF_CLK;
}
EXPORT_SYMBOL(clk_get_rate);
+
+struct clk *devm_clk_get(struct device *dev, const char *id)
+{
+ return NULL;
+}
+EXPORT_SYMBOL(devm_clk_get);
+
/***************************************************************************/
select SYS_HAS_CPU_MIPS32_R1
select SYS_HAS_CPU_MIPS32_R2
select SYS_HAS_CPU_MIPS64_R1
+ select SYS_HAS_CPU_MIPS64_R2
select SYS_HAS_CPU_NEVADA
select SYS_HAS_CPU_RM7000
select SYS_HAS_EARLY_PRINTK
config CPU_CAVIUM_OCTEON
bool "Cavium Octeon processor"
depends on SYS_HAS_CPU_CAVIUM_OCTEON
+ select ARCH_SPARSEMEM_ENABLE
select CPU_HAS_PREFETCH
select CPU_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_SMP
select BCMA
select BCMA_HOST_SOC
select BCMA_DRIVER_MIPS
+ select BCMA_HOST_PCI if PCI
select BCMA_DRIVER_PCI_HOSTMODE if PCI
default y
help
return ret;
}
-static const __initdata struct {
+static const struct {
unsigned int cs;
unsigned int base;
unsigned int size;
-} pcmcia_cs[3] = {
+} pcmcia_cs[3] __initconst = {
{
.cs = MPI_CS_PCMCIA_COMMON,
.base = BCM_PCMCIA_COMMON_BASE_PA,
help
Lock the kernel's implementation of memcpy() into L2.
-config ARCH_SPARSEMEM_ENABLE
- def_bool y
- select SPARSEMEM_STATIC
-
config IOMMU_HELPER
bool
octeon_init_cvmcount();
octeon_irq_setup_secondary();
- raw_local_irq_enable();
}
/**
/* to generate the first CPU timer interrupt */
write_c0_compare(read_c0_count() + mips_hpt_frequency / HZ);
+ local_irq_enable();
}
/**
#include <linux/irqflags.h>
#include <linux/types.h>
#include <asm/barrier.h>
-#include <asm/bug.h>
#include <asm/byteorder.h> /* sigh ... */
#include <asm/cpu-features.h>
#include <asm/sgidefs.h>
#ifndef __ASM_CMPXCHG_H
#define __ASM_CMPXCHG_H
+#include <linux/bug.h>
#include <linux/irqflags.h>
#include <asm/war.h>
#define PRID_IMP_24KE 0x9600
#define PRID_IMP_74K 0x9700
#define PRID_IMP_1004K 0x9900
+#define PRID_IMP_M14KC 0x9c00
/*
* These are the PRID's for when 23:16 == PRID_COMP_SIBYTE
*/
CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_1004K, CPU_74K,
CPU_ALCHEMY, CPU_PR4450, CPU_BMIPS32, CPU_BMIPS3300, CPU_BMIPS4350,
- CPU_BMIPS4380, CPU_BMIPS5000, CPU_JZRISC,
+ CPU_BMIPS4380, CPU_BMIPS5000, CPU_JZRISC, CPU_M14KC,
/*
* MIPS64 class processors
*/
- CPU_5KC, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2,
+ CPU_5KC, CPU_5KE, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2,
CPU_CAVIUM_OCTEON, CPU_CAVIUM_OCTEON_PLUS, CPU_CAVIUM_OCTEON2,
CPU_XLR, CPU_XLP,
#define MIPS_CPU_ISA_M64R2 0x00000100
#define MIPS_CPU_ISA_32BIT (MIPS_CPU_ISA_I | MIPS_CPU_ISA_II | \
- MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 )
+ MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2)
#define MIPS_CPU_ISA_64BIT (MIPS_CPU_ISA_III | MIPS_CPU_ISA_IV | \
MIPS_CPU_ISA_V | MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M64R2)
#define GIC_VPE_EIC_SHADOW_SET_BASE 0x0100
#define GIC_VPE_EIC_SS(intr) \
- (GIC_EIC_SHADOW_SET_BASE + (4 * intr))
+ (GIC_VPE_EIC_SHADOW_SET_BASE + (4 * intr))
#define GIC_VPE_EIC_VEC_BASE 0x0800
#define GIC_VPE_EIC_VEC(intr) \
#define GIC_FLAG_TRANSPARENT 0x02
};
+/*
+ * This is only used in EIC mode. This helps to figure out which
+ * shared interrupts we need to process when we get a vector interrupt.
+ */
+#define GIC_MAX_SHARED_INTR 0x5
+struct gic_shared_intr_map {
+ unsigned int num_shared_intr;
+ unsigned int intr_list[GIC_MAX_SHARED_INTR];
+ unsigned int local_intr_mask;
+};
+
extern void gic_init(unsigned long gic_base_addr,
unsigned long gic_addrspace_size, struct gic_intr_map *intrmap,
unsigned int intrmap_size, unsigned int irqbase);
extern void gic_send_ipi(unsigned int intr);
extern unsigned int plat_ipi_call_int_xlate(unsigned int);
extern unsigned int plat_ipi_resched_int_xlate(unsigned int);
+extern void gic_bind_eic_interrupt(int irq, int set);
+extern unsigned int gic_get_timer_pending(void);
#endif /* _ASM_GICREGS_H */
unsigned int func : 6;
};
-struct ma_format { /* FPU multipy and add format (MIPS IV) */
+struct ma_format { /* FPU multiply and add format (MIPS IV) */
unsigned int opcode : 6;
unsigned int fr : 5;
unsigned int ft : 5;
unsigned int opcode : 6;
};
-struct ma_format { /* FPU multipy and add format (MIPS IV) */
+struct ma_format { /* FPU multiply and add format (MIPS IV) */
unsigned int fmt : 2;
unsigned int func : 4;
unsigned int fd : 5;
#include <linux/types.h>
#include <asm/addrspace.h>
+#include <asm/bug.h>
#include <asm/byteorder.h>
#include <asm/cpu.h>
#include <asm/cpu-features.h>
* IE7. Since R2 their number has to be read from the c0_intctl register.
*/
#define CP0_LEGACY_COMPARE_IRQ 7
+#define CP0_LEGACY_PERFCNT_IRQ 7
extern int cp0_compare_irq;
extern int cp0_compare_irq_shift;
#define CKCTL_6368_USBH_CLK_EN (1 << 15)
#define CKCTL_6368_DISABLE_GLESS_EN (1 << 16)
#define CKCTL_6368_NAND_CLK_EN (1 << 17)
-#define CKCTL_6368_IPSEC_CLK_EN (1 << 17)
+#define CKCTL_6368_IPSEC_CLK_EN (1 << 18)
#define CKCTL_6368_ALL_SAFE_EN (CKCTL_6368_SWPKT_USB_EN | \
CKCTL_6368_SWPKT_SAR_EN | \
#define GIC_CPU_INT4 4 /* . */
#define GIC_CPU_INT5 5 /* Core Interrupt 5 */
+/* MALTA GIC local interrupts */
+#define GIC_INT_TMR (GIC_CPU_INT5)
+#define GIC_INT_PERFCTR (GIC_CPU_INT5)
+
+/* GIC constants */
+/* Add 2 to convert non-eic hw int # to eic vector # */
+#define GIC_CPU_TO_VEC_OFFSET (2)
+/* If we map an intr to pin X, GIC will actually generate vector X+1 */
+#define GIC_PIN_TO_VEC_OFFSET (1)
+
#define GIC_EXT_INTR(x) x
/* External Interrupts used for IPI */
#define CP0_VPECONF0 $1, 2
#define CP0_VPECONF1 $1, 3
#define CP0_YQMASK $1, 4
-#define CP0_VPESCHEDULE $1, 5
+#define CP0_VPESCHEDULE $1, 5
#define CP0_VPESCHEFBK $1, 6
#define CP0_TCSTATUS $2, 1
#define CP0_TCBIND $2, 2
* switch_to(n) should switch tasks to task nr n, first
* checking that n isn't the current task, in which case it does nothing.
*/
-extern asmlinkage void *resume(void *last, void *next, void *next_ti);
+extern asmlinkage void *resume(void *last, void *next, void *next_ti, u32 __usedfpu);
extern unsigned int ll_bit;
extern struct task_struct *ll_task;
#define switch_to(prev, next, last) \
do { \
+ u32 __usedfpu; \
__mips_mt_fpaff_switch_to(prev); \
if (cpu_has_dsp) \
__save_dsp(prev); \
__clear_software_ll_bit(); \
- (last) = resume(prev, next, task_thread_info(next)); \
+ __usedfpu = test_and_clear_tsk_thread_flag(prev, TIF_USEDFPU); \
+ (last) = resume(prev, next, task_thread_info(next), __usedfpu); \
} while (0)
#define finish_arch_switch(prev) \
register struct thread_info *__current_thread_info __asm__("$28");
#define current_thread_info() __current_thread_info
+#endif /* !__ASSEMBLY__ */
+
/* thread information allocation */
#if defined(CONFIG_PAGE_SIZE_4KB) && defined(CONFIG_32BIT)
#define THREAD_SIZE_ORDER (1)
#define STACK_WARN (THREAD_SIZE / 8)
-#endif /* !__ASSEMBLY__ */
-
#define PREEMPT_ACTIVE 0x10000000
/*
* Copyright (C) xxxx the Anonymous
* Copyright (C) 1994 - 2006 Ralf Baechle
* Copyright (C) 2003, 2004 Maciej W. Rozycki
- * Copyright (C) 2001, 2004 MIPS Inc.
+ * Copyright (C) 2001, 2004, 2011, 2012 MIPS Technologies, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
cpu_wait = rm7k_wait_irqoff;
break;
+ case CPU_M14KC:
case CPU_24K:
case CPU_34K:
case CPU_1004K:
c->cputype = CPU_5KC;
__cpu_name[cpu] = "MIPS 5Kc";
break;
+ case PRID_IMP_5KE:
+ c->cputype = CPU_5KE;
+ __cpu_name[cpu] = "MIPS 5KE";
+ break;
case PRID_IMP_20KC:
c->cputype = CPU_20KC;
__cpu_name[cpu] = "MIPS 20Kc";
c->cputype = CPU_74K;
__cpu_name[cpu] = "MIPS 74Kc";
break;
+ case PRID_IMP_M14KC:
+ c->cputype = CPU_M14KC;
+ __cpu_name[cpu] = "MIPS M14Kc";
+ break;
case PRID_IMP_1004K:
c->cputype = CPU_1004K;
__cpu_name[cpu] = "MIPS 1004Kc";
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 1996, 97, 98, 99, 2000, 01, 03, 04, 05 by Ralf Baechle
+ * Copyright (C) 1996, 97, 98, 99, 2000, 01, 03, 04, 05, 12 by Ralf Baechle
* Copyright (C) 1999, 2000, 01 Silicon Graphics, Inc.
*/
#include <linux/interrupt.h>
EXPORT_SYMBOL(kernel_thread);
+/*
+ * Functions that operate on entire pages. Mostly used by memory management.
+ */
+EXPORT_SYMBOL(clear_page);
+EXPORT_SYMBOL(copy_page);
+
/*
* Userspace access stuff.
*/
/*
* task_struct *resume(task_struct *prev, task_struct *next,
- * struct thread_info *next_ti)
+ * struct thread_info *next_ti, int usedfpu)
*/
.align 7
LEAF(resume)
return counters >> vpe_shift();
}
-static unsigned int counters_per_cpu_to_total(unsigned int counters)
-{
- return counters << vpe_shift();
-}
-
#else /* !CONFIG_MIPS_MT_SMP */
#define vpe_id() 0
/*
* task_struct *resume(task_struct *prev, task_struct *next,
- * struct thread_info *next_ti) )
+ * struct thread_info *next_ti, int usedfpu)
*/
LEAF(resume)
mfc0 t1, CP0_STATUS
cpu_save_nonscratch a0
sw ra, THREAD_REG31(a0)
- /*
- * check if we need to save FPU registers
- */
- lw t3, TASK_THREAD_INFO(a0)
- lw t0, TI_FLAGS(t3)
- li t1, _TIF_USEDFPU
- and t2, t0, t1
- beqz t2, 1f
- nor t1, zero, t1
+ beqz a3, 1f
- and t0, t0, t1
- sw t0, TI_FLAGS(t3)
+ PTR_L t3, TASK_THREAD_INFO(a0)
/*
* clear saved user stack CU1 bit
/*
* task_struct *resume(task_struct *prev, task_struct *next,
- * struct thread_info *next_ti)
+ * struct thread_info *next_ti, int usedfpu)
*/
.align 5
LEAF(resume)
/*
* check if we need to save FPU registers
*/
- PTR_L t3, TASK_THREAD_INFO(a0)
- LONG_L t0, TI_FLAGS(t3)
- li t1, _TIF_USEDFPU
- and t2, t0, t1
- beqz t2, 1f
- nor t1, zero, t1
- and t0, t0, t1
- LONG_S t0, TI_FLAGS(t3)
+ beqz a3, 1f
+ PTR_L t3, TASK_THREAD_INFO(a0)
/*
* clear saved user stack CU1 bit
*/
#include <linux/smp.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
-#include <linux/init.h>
#include <linux/cpu.h>
#include <linux/cpumask.h>
#include <linux/reboot.h>
write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), 0));
#endif
-
- /* make sure there won't be a timer interrupt for a little while */
- write_c0_compare(read_c0_count() + mips_hpt_frequency / HZ);
-
- irq_enable_hazard();
- set_c0_status(IE_SW0 | IE_SW1 | IE_IRQ1 | IE_IRQ5 | ST0_IE);
- irq_enable_hazard();
}
/*
static void bmips_smp_finish(void)
{
pr_info("SMP: CPU%d is running\n", smp_processor_id());
+
+ /* make sure there won't be a timer interrupt for a little while */
+ write_c0_compare(read_c0_count() + mips_hpt_frequency / HZ);
+
+ irq_enable_hazard();
+ set_c0_status(IE_SW0 | IE_SW1 | IE_IRQ1 | IE_IRQ5 | ST0_IE);
+ irq_enable_hazard();
}
/*
notify_cpu_starting(cpu);
- mp_ops->smp_finish();
+ set_cpu_online(cpu, true);
+
set_cpu_sibling_map(cpu);
cpu_set(cpu, cpu_callin_map);
synchronise_count_slave();
+ /*
+ * irq will be enabled in ->smp_finish(), enabling it too early
+ * is dangerous.
+ */
+ WARN_ON_ONCE(!irqs_disabled());
+ mp_ops->smp_finish();
+
cpu_idle();
}
while (!cpu_isset(cpu, cpu_callin_map))
udelay(100);
- set_cpu_online(cpu, true);
-
return 0;
}
/*
* Common setup before any secondaries are started
- * Make sure all CPU's are in a sensible state before we boot any of the
+ * Make sure all CPUs are in a sensible state before we boot any of the
* secondaries.
*
* For MIPS MT "SMTC" operation, we set up all TCs, spread as evenly
/*
* TCContext gets an offset from the base of the IPIQ array
* to be used in low-level code to detect the presence of
- * an active IPI queue
+ * an active IPI queue.
*/
write_tc_c0_tccontext((sizeof(struct smtc_ipi_q) * cpu) << 16);
/* Bind tc to vpe */
write_tc_c0_tcbind(vpe);
- /* In general, all TCs should have the same cpu_data indications */
+ /* In general, all TCs should have the same cpu_data indications. */
memcpy(&cpu_data[cpu], &cpu_data[0], sizeof(struct cpuinfo_mips));
/* For 34Kf, start with TC/CPU 0 as sole owner of single FPU context */
if (cpu_data[0].cputype == CPU_34K ||
}
/*
- * Tweak to get Count registes in as close a sync as possible.
- * Value seems good for 34K-class cores.
+ * Tweak to get Count registes in as close a sync as possible. The
+ * value seems good for 34K-class cores.
*/
#define CP0_SKEW 8
void smtc_init_secondary(void)
{
- local_irq_enable();
}
void smtc_smp_finish(void)
if (cpu > 0 && (cpu_data[cpu].vpe_id != cpu_data[cpu - 1].vpe_id))
write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ);
+ local_irq_enable();
+
printk("TC %d going on-line as CPU %d\n",
cpu_data[smp_processor_id()].tc_id, smp_processor_id());
}
void __cpuinit synchronise_count_slave(void)
{
int i;
- unsigned long flags;
unsigned int initcount;
int ncpus;
return;
#endif
- local_irq_save(flags);
-
/*
* Not every cpu is online at the time this gets called,
* so we first wait for the master to say everyone is ready
}
/* Arrange for an interrupt in a short while */
write_c0_compare(read_c0_count() + COUNTON);
-
- local_irq_restore(flags);
}
#undef NR_LOOPS
unsigned long ra = regs->regs[31];
unsigned long pc = regs->cp0_epc;
+ if (!task)
+ task = current;
+
if (raw_show_trace || !__kernel_text_address(pc)) {
show_raw_backtrace(sp);
return;
break;
case CPU_5KC:
+ case CPU_5KE:
write_c0_ecc(0x80000000);
back_to_back_c0_hazard();
/* Set the PE bit (bit 31) in the c0_errctl register. */
* Timer interrupt
*/
int cp0_compare_irq;
+EXPORT_SYMBOL_GPL(cp0_compare_irq);
int cp0_compare_irq_shift;
/*
cp0_perfcount_irq = -1;
} else {
cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ;
- cp0_compare_irq_shift = cp0_compare_irq;
+ cp0_compare_irq_shift = CP0_LEGACY_PERFCNT_IRQ;
cp0_perfcount_irq = -1;
}
#include <asm/asm-offsets.h>
#include <asm/page.h>
+#include <asm/thread_info.h>
#include <asm-generic/vmlinux.lds.h>
#undef mips
.data : { /* Data */
. = . + DATAOFFSET; /* for CONFIG_MAPPED_KERNEL */
- INIT_TASK_DATA(PAGE_SIZE)
+ INIT_TASK_DATA(THREAD_SIZE)
NOSAVE_DATA
CACHELINE_ALIGNED_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
READ_MOSTLY_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
#
obj-y += cache.o dma-default.o extable.o fault.o \
- gup.o init.o mmap.o page.o tlbex.o \
- tlbex-fault.o uasm.o
+ gup.o init.o mmap.o page.o page-funcs.o \
+ tlbex.o tlbex-fault.o uasm.o
obj-$(CONFIG_32BIT) += ioremap.o pgtable-32.o
obj-$(CONFIG_64BIT) += pgtable-64.o
c->icache.linesz = 2 << lsize;
else
c->icache.linesz = lsize;
- c->icache.sets = 64 << ((config1 >> 22) & 7);
+ c->icache.sets = 32 << (((config1 >> 22) + 1) & 7);
c->icache.ways = 1 + ((config1 >> 16) & 7);
icache_size = c->icache.sets *
c->dcache.linesz = 2 << lsize;
else
c->dcache.linesz= lsize;
- c->dcache.sets = 64 << ((config1 >> 13) & 7);
+ c->dcache.sets = 32 << (((config1 >> 13) + 1) & 7);
c->dcache.ways = 1 + ((config1 >> 7) & 7);
dcache_size = c->dcache.sets *
case CPU_R14000:
break;
+ case CPU_M14KC:
case CPU_24K:
case CPU_34K:
case CPU_74K:
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Micro-assembler generated clear_page/copy_page functions.
+ *
+ * Copyright (C) 2012 MIPS Technologies, Inc.
+ * Copyright (C) 2012 Ralf Baechle <ralf@linux-mips.org>
+ */
+#include <asm/asm.h>
+#include <asm/regdef.h>
+
+#ifdef CONFIG_SIBYTE_DMA_PAGEOPS
+#define cpu_clear_page_function_name clear_page_cpu
+#define cpu_copy_page_function_name copy_page_cpu
+#else
+#define cpu_clear_page_function_name clear_page
+#define cpu_copy_page_function_name copy_page
+#endif
+
+/*
+ * Maximum sizes:
+ *
+ * R4000 128 bytes S-cache: 0x058 bytes
+ * R4600 v1.7: 0x05c bytes
+ * R4600 v2.0: 0x060 bytes
+ * With prefetching, 16 word strides 0x120 bytes
+ */
+EXPORT(__clear_page_start)
+LEAF(cpu_clear_page_function_name)
+1: j 1b /* Dummy, will be replaced. */
+ .space 288
+END(cpu_clear_page_function_name)
+EXPORT(__clear_page_end)
+
+/*
+ * Maximum sizes:
+ *
+ * R4000 128 bytes S-cache: 0x11c bytes
+ * R4600 v1.7: 0x080 bytes
+ * R4600 v2.0: 0x07c bytes
+ * With prefetching, 16 word strides 0x540 bytes
+ */
+EXPORT(__copy_page_start)
+LEAF(cpu_copy_page_function_name)
+1: j 1b /* Dummy, will be replaced. */
+ .space 1344
+END(cpu_copy_page_function_name)
+EXPORT(__copy_page_end)
* Copyright (C) 2003, 04, 05 Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 2007 Maciej W. Rozycki
* Copyright (C) 2008 Thiemo Seufer
+ * Copyright (C) 2012 MIPS Technologies, Inc.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#define cpu_is_r4600_v1_x() ((read_c0_prid() & 0xfffffff0) == 0x00002010)
#define cpu_is_r4600_v2_x() ((read_c0_prid() & 0xfffffff0) == 0x00002020)
-/*
- * Maximum sizes:
- *
- * R4000 128 bytes S-cache: 0x058 bytes
- * R4600 v1.7: 0x05c bytes
- * R4600 v2.0: 0x060 bytes
- * With prefetching, 16 word strides 0x120 bytes
- */
-
-static u32 clear_page_array[0x120 / 4];
-
-#ifdef CONFIG_SIBYTE_DMA_PAGEOPS
-void clear_page_cpu(void *page) __attribute__((alias("clear_page_array")));
-#else
-void clear_page(void *page) __attribute__((alias("clear_page_array")));
-#endif
-
-EXPORT_SYMBOL(clear_page);
-
-/*
- * Maximum sizes:
- *
- * R4000 128 bytes S-cache: 0x11c bytes
- * R4600 v1.7: 0x080 bytes
- * R4600 v2.0: 0x07c bytes
- * With prefetching, 16 word strides 0x540 bytes
- */
-static u32 copy_page_array[0x540 / 4];
-
-#ifdef CONFIG_SIBYTE_DMA_PAGEOPS
-void
-copy_page_cpu(void *to, void *from) __attribute__((alias("copy_page_array")));
-#else
-void copy_page(void *to, void *from) __attribute__((alias("copy_page_array")));
-#endif
-
-EXPORT_SYMBOL(copy_page);
-
-
static int pref_bias_clear_store __cpuinitdata;
static int pref_bias_copy_load __cpuinitdata;
static int pref_bias_copy_store __cpuinitdata;
}
}
+extern u32 __clear_page_start;
+extern u32 __clear_page_end;
+extern u32 __copy_page_start;
+extern u32 __copy_page_end;
+
void __cpuinit build_clear_page(void)
{
int off;
- u32 *buf = (u32 *)&clear_page_array;
+ u32 *buf = &__clear_page_start;
struct uasm_label *l = labels;
struct uasm_reloc *r = relocs;
int i;
uasm_i_jr(&buf, RA);
uasm_i_nop(&buf);
- BUG_ON(buf > clear_page_array + ARRAY_SIZE(clear_page_array));
+ BUG_ON(buf > &__clear_page_end);
uasm_resolve_relocs(relocs, labels);
pr_debug("Synthesized clear page handler (%u instructions).\n",
- (u32)(buf - clear_page_array));
+ (u32)(buf - &__clear_page_start));
pr_debug("\t.set push\n");
pr_debug("\t.set noreorder\n");
- for (i = 0; i < (buf - clear_page_array); i++)
- pr_debug("\t.word 0x%08x\n", clear_page_array[i]);
+ for (i = 0; i < (buf - &__clear_page_start); i++)
+ pr_debug("\t.word 0x%08x\n", (&__clear_page_start)[i]);
pr_debug("\t.set pop\n");
}
void __cpuinit build_copy_page(void)
{
int off;
- u32 *buf = (u32 *)©_page_array;
+ u32 *buf = &__copy_page_start;
struct uasm_label *l = labels;
struct uasm_reloc *r = relocs;
int i;
uasm_i_jr(&buf, RA);
uasm_i_nop(&buf);
- BUG_ON(buf > copy_page_array + ARRAY_SIZE(copy_page_array));
+ BUG_ON(buf > &__copy_page_end);
uasm_resolve_relocs(relocs, labels);
pr_debug("Synthesized copy page handler (%u instructions).\n",
- (u32)(buf - copy_page_array));
+ (u32)(buf - &__copy_page_start));
pr_debug("\t.set push\n");
pr_debug("\t.set noreorder\n");
- for (i = 0; i < (buf - copy_page_array); i++)
- pr_debug("\t.word 0x%08x\n", copy_page_array[i]);
+ for (i = 0; i < (buf - &__copy_page_start); i++)
+ pr_debug("\t.word 0x%08x\n", (&__copy_page_start)[i]);
pr_debug("\t.set pop\n");
}
#ifdef CONFIG_SIBYTE_DMA_PAGEOPS
+extern void clear_page_cpu(void *page);
+extern void copy_page_cpu(void *to, void *from);
/*
* Pad descriptors to cacheline, since each is exclusively owned by a
* Copyright (C) 2005, 2007, 2008, 2009 Maciej W. Rozycki
* Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 2008, 2009 Cavium Networks, Inc.
+ * Copyright (C) 2011 MIPS Technologies, Inc.
*
* ... and the days got worse and worse and now you see
* I've gone completly out of my mind.
case CPU_R14000:
case CPU_4KC:
case CPU_4KEC:
+ case CPU_M14KC:
case CPU_SB1:
case CPU_SB1A:
case CPU_4KSC:
return;
}
- if (controller->io_resource->start < 0x00001000UL) /* FIXME */
- controller->io_resource->start = 0x00001000UL;
+ /* Change start address to avoid conflicts with ACPI and SMB devices */
+ if (controller->io_resource->start < 0x00002000UL)
+ controller->io_resource->start = 0x00002000UL;
iomem_resource.end &= 0xfffffffffULL; /* 64 GB */
ioport_resource.end = controller->io_resource->end;
}
/* Enable PCI 2.1 compatibility in PIIX4 */
-static void __init quirk_dlcsetup(struct pci_dev *dev)
+static void __devinit quirk_dlcsetup(struct pci_dev *dev)
{
u8 odlc, ndlc;
(void) pci_read_config_byte(dev, 0x82, &odlc);
unsigned int __iomem *jmpr_p =
(unsigned int *) ioremap(MALTA_JMPRS_REG, sizeof(unsigned int));
int jmpr = (__raw_readl(jmpr_p) >> 2) & 0x07;
- static const int pciclocks[] __initdata = {
+ static const int pciclocks[] __initconst = {
33, 20, 25, 30, 12, 16, 37, 10
};
int pciclock = pciclocks[jmpr];
void xlp_mmu_init(void)
{
+ /* enable extended TLB and Large Fixed TLB */
write_c0_config6(read_c0_config6() | 0x24);
- current_cpu_data.tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1;
+
+ /* set page mask of Fixed TLB in config7 */
write_c0_config7(PM_DEFAULT_MASK >>
(13 + (ffz(PM_DEFAULT_MASK >> 13) / 2)));
}
nlm_common_ebase = read_c0_ebase() & (~((1 << 12) - 1));
#ifdef CONFIG_SMP
nlm_wakeup_secondary_cpus(0xffffffff);
+
+ /* update TLB size after waking up threads */
+ current_cpu_data.tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1;
+
register_smp_ops(&nlm_smp_ops);
#endif
}
switch (current_cpu_type()) {
case CPU_5KC:
+ case CPU_M14KC:
case CPU_20KC:
case CPU_24K:
case CPU_25KF:
op_model_mipsxx_ops.num_counters = counters;
switch (current_cpu_type()) {
+ case CPU_M14KC:
+ op_model_mipsxx_ops.cpu_type = "mips/M14Kc";
+ break;
+
case CPU_20KC:
op_model_mipsxx_ops.cpu_type = "mips/20K";
break;
return 0;
}
-static void __init loongson2e_nec_fixup(struct pci_dev *pdev)
+static void __devinit loongson2e_nec_fixup(struct pci_dev *pdev)
{
unsigned int val;
pci_write_config_dword(pdev, 0xe4, 1 << 5);
}
-static void __init loongson2e_686b_func0_fixup(struct pci_dev *pdev)
+static void __devinit loongson2e_686b_func0_fixup(struct pci_dev *pdev)
{
unsigned char c;
printk(KERN_INFO"via686b fix: ISA bridge done\n");
}
-static void __init loongson2e_686b_func1_fixup(struct pci_dev *pdev)
+static void __devinit loongson2e_686b_func1_fixup(struct pci_dev *pdev)
{
printk(KERN_INFO"via686b fix: IDE\n");
printk(KERN_INFO"via686b fix: IDE done\n");
}
-static void __init loongson2e_686b_func2_fixup(struct pci_dev *pdev)
+static void __devinit loongson2e_686b_func2_fixup(struct pci_dev *pdev)
{
/* irq routing */
pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 10);
}
-static void __init loongson2e_686b_func3_fixup(struct pci_dev *pdev)
+static void __devinit loongson2e_686b_func3_fixup(struct pci_dev *pdev)
{
/* irq routing */
pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 11);
}
-static void __init loongson2e_686b_func5_fixup(struct pci_dev *pdev)
+static void __devinit loongson2e_686b_func5_fixup(struct pci_dev *pdev)
{
unsigned int val;
unsigned char c;
}
/* CS5536 SPEC. fixup */
-static void __init loongson_cs5536_isa_fixup(struct pci_dev *pdev)
+static void __devinit loongson_cs5536_isa_fixup(struct pci_dev *pdev)
{
/* the uart1 and uart2 interrupt in PIC is enabled as default */
pci_write_config_dword(pdev, PCI_UART1_INT_REG, 1);
pci_write_config_dword(pdev, PCI_UART2_INT_REG, 1);
}
-static void __init loongson_cs5536_ide_fixup(struct pci_dev *pdev)
+static void __devinit loongson_cs5536_ide_fixup(struct pci_dev *pdev)
{
/* setting the mutex pin as IDE function */
pci_write_config_dword(pdev, PCI_IDE_CFG_REG,
CS5536_IDE_FLASH_SIGNATURE);
}
-static void __init loongson_cs5536_acc_fixup(struct pci_dev *pdev)
+static void __devinit loongson_cs5536_acc_fixup(struct pci_dev *pdev)
{
/* enable the AUDIO interrupt in PIC */
pci_write_config_dword(pdev, PCI_ACC_INT_REG, 1);
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xc0);
}
-static void __init loongson_cs5536_ohci_fixup(struct pci_dev *pdev)
+static void __devinit loongson_cs5536_ohci_fixup(struct pci_dev *pdev)
{
/* enable the OHCI interrupt in PIC */
/* THE OHCI, EHCI, UDC, OTG are shared with interrupt in PIC */
pci_write_config_dword(pdev, PCI_OHCI_INT_REG, 1);
}
-static void __init loongson_cs5536_ehci_fixup(struct pci_dev *pdev)
+static void __devinit loongson_cs5536_ehci_fixup(struct pci_dev *pdev)
{
u32 hi, lo;
pci_write_config_dword(pdev, PCI_EHCI_FLADJ_REG, 0x2000);
}
-static void __init loongson_nec_fixup(struct pci_dev *pdev)
+static void __devinit loongson_nec_fixup(struct pci_dev *pdev)
{
unsigned int val;
return 0;
}
-static void __init malta_piix_func0_fixup(struct pci_dev *pdev)
+static void __devinit malta_piix_func0_fixup(struct pci_dev *pdev)
{
unsigned char reg_val;
- static int piixirqmap[16] __initdata = { /* PIIX PIRQC[A:D] irq mappings */
+ static int piixirqmap[16] __devinitdata = { /* PIIX PIRQC[A:D] irq mappings */
0, 0, 0, 3,
4, 5, 6, 7,
0, 9, 10, 11,
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0,
malta_piix_func0_fixup);
-static void __init malta_piix_func1_fixup(struct pci_dev *pdev)
+static void __devinit malta_piix_func1_fixup(struct pci_dev *pdev)
{
unsigned char reg_val;
#include <asm/vr41xx/mpc30x.h>
-static const int internal_func_irqs[] __initdata = {
+static const int internal_func_irqs[] __initconst = {
VRC4173_CASCADE_IRQ,
VRC4173_AC97_IRQ,
VRC4173_USB_IRQ,
};
-static const int irq_tab_mpc30x[] __initdata = {
+static const int irq_tab_mpc30x[] __initconst = {
[12] = VRC4173_PCMCIA1_IRQ,
[13] = VRC4173_PCMCIA2_IRQ,
[29] = MQ200_IRQ,
* Set the BCM1250, etc. PCI host bridge's TRDY timeout
* to the finite max.
*/
-static void __init quirk_sb1250_pci(struct pci_dev *dev)
+static void __devinit quirk_sb1250_pci(struct pci_dev *dev)
{
pci_write_config_byte(dev, 0x40, 0xff);
}
/*
* The BCM1250, etc. PCI/HT bridge reports as a host bridge.
*/
-static void __init quirk_sb1250_ht(struct pci_dev *dev)
+static void __devinit quirk_sb1250_ht(struct pci_dev *dev)
{
dev->class = PCI_CLASS_BRIDGE_PCI << 8;
}
/*
* Set the SP1011 HT/PCI bridge's TRDY timeout to the finite max.
*/
-static void __init quirk_sp1011(struct pci_dev *dev)
+static void __devinit quirk_sp1011(struct pci_dev *dev)
{
pci_write_config_byte(dev, 0x64, 0xff);
}
}
#ifdef CONFIG_TOSHIBA_FPCIB0
-static void __init tx4927_quirk_slc90e66_bridge(struct pci_dev *dev)
+static void __devinit tx4927_quirk_slc90e66_bridge(struct pci_dev *dev)
{
struct tx4927_pcic_reg __iomem *pcicptr = pci_bus_to_pcicptr(dev->bus);
bridge->b_widget.w_tflush; /* Flush */
}
-static void __init pci_fixup_ioc3(struct pci_dev *d)
+static void __devinit pci_fixup_ioc3(struct pci_dev *d)
{
pci_disable_swapping(d);
}
/* setup reset gpio used by pci */
reset_gpio = of_get_named_gpio(node, "gpio-reset", 0);
- if (reset_gpio > 0)
+ if (gpio_is_valid(reset_gpio))
devm_gpio_request(&pdev->dev, reset_gpio, "pci-reset");
/* enable auto-switching between PCI and EBU */
ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_IEN) | 0x10, LTQ_EBU_PCC_IEN);
/* toggle reset pin */
- if (reset_gpio > 0) {
+ if (gpio_is_valid(reset_gpio)) {
__gpio_set_value(reset_gpio, 0);
wmb();
mdelay(1);
#include <linux/irq.h>
#include <linux/irqdesc.h>
#include <linux/console.h>
+#include <linux/pci_regs.h>
#include <asm/io.h>
.io_offset = 0x00000000UL,
};
+/*
+ * The top level PCIe links on the XLS PCIe controller appear as
+ * bridges. Given a device, this function finds which link it is
+ * on.
+ */
+static struct pci_dev *xls_get_pcie_link(const struct pci_dev *dev)
+{
+ struct pci_bus *bus, *p;
+
+ /* Find the bridge on bus 0 */
+ bus = dev->bus;
+ for (p = bus->parent; p && p->number != 0; p = p->parent)
+ bus = p;
+
+ return p ? bus->self : NULL;
+}
+
static int get_irq_vector(const struct pci_dev *dev)
{
+ struct pci_dev *lnk;
+
if (!nlm_chip_is_xls())
- return PIC_PCIX_IRQ; /* for XLR just one IRQ*/
+ return PIC_PCIX_IRQ; /* for XLR just one IRQ */
/*
* For XLS PCIe, there is an IRQ per Link, find out which
* link the device is on to assign interrupts
- */
- if (dev->bus->self == NULL)
+ */
+ lnk = xls_get_pcie_link(dev);
+ if (lnk == NULL)
return 0;
- switch (dev->bus->self->devfn) {
- case 0x0:
+ switch (PCI_SLOT(lnk->devfn)) {
+ case 0:
return PIC_PCIE_LINK0_IRQ;
- case 0x8:
+ case 1:
return PIC_PCIE_LINK1_IRQ;
- case 0x10:
+ case 2:
if (nlm_chip_is_xls_b())
return PIC_PCIE_XLSB0_LINK2_IRQ;
else
return PIC_PCIE_LINK2_IRQ;
- case 0x18:
+ case 3:
if (nlm_chip_is_xls_b())
return PIC_PCIE_XLSB0_LINK3_IRQ;
else
return PIC_PCIE_LINK3_IRQ;
}
- WARN(1, "Unexpected devfn %d\n", dev->bus->self->devfn);
+ WARN(1, "Unexpected devfn %d\n", lnk->devfn);
return 0;
}
int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
{
struct msi_msg msg;
+ struct pci_dev *lnk;
int irq, ret;
+ u16 val;
+
+ /* MSI not supported on XLR */
+ if (!nlm_chip_is_xls())
+ return 1;
+
+ /*
+ * Enable MSI on the XLS PCIe controller bridge which was disabled
+ * at enumeration, the bridge MSI capability is at 0x50
+ */
+ lnk = xls_get_pcie_link(dev);
+ if (lnk == NULL)
+ return 1;
+
+ pci_read_config_word(lnk, 0x50 + PCI_MSI_FLAGS, &val);
+ if ((val & PCI_MSI_FLAGS_ENABLE) == 0) {
+ val |= PCI_MSI_FLAGS_ENABLE;
+ pci_write_config_word(lnk, 0x50 + PCI_MSI_FLAGS, val);
+ }
irq = get_irq_vector(dev);
if (irq <= 0)
}
} else {
/* XLR PCI controller ACK */
- irq_set_handler_data(PIC_PCIE_XLSB0_LINK3_IRQ, xlr_pci_ack);
+ irq_set_handler_data(PIC_PCIX_IRQ, xlr_pci_ack);
}
return 0;
*/
static void __cpuinit yos_init_secondary(void)
{
- set_c0_status(ST0_CO | ST0_IE | ST0_IM);
}
static void __cpuinit yos_smp_finish(void)
{
+ set_c0_status(ST0_CO | ST0_IM | ST0_IE);
}
/* Hook for after all CPUs are online */
#define CALLIOPE_ADDR(x) (CALLIOPE_IO_BASE + (x))
-const struct register_map calliope_register_map __initdata = {
+const struct register_map calliope_register_map __initconst = {
.eic_slow0_strt_add = {.phys = CALLIOPE_ADDR(0x800000)},
.eic_cfg_bits = {.phys = CALLIOPE_ADDR(0x800038)},
.eic_ready_status = {.phys = CALLIOPE_ADDR(0x80004c)},
#define CRONUS_ADDR(x) (CRONUS_IO_BASE + (x))
-const struct register_map cronus_register_map __initdata = {
+const struct register_map cronus_register_map __initconst = {
.eic_slow0_strt_add = {.phys = CRONUS_ADDR(0x000000)},
.eic_cfg_bits = {.phys = CRONUS_ADDR(0x000038)},
.eic_ready_status = {.phys = CRONUS_ADDR(0x00004C)},
#include <linux/init.h>
#include <asm/mach-powertv/asic.h>
-const struct register_map gaia_register_map __initdata = {
+const struct register_map gaia_register_map __initconst = {
.eic_slow0_strt_add = {.phys = GAIA_IO_BASE + 0x000000},
.eic_cfg_bits = {.phys = GAIA_IO_BASE + 0x000038},
.eic_ready_status = {.phys = GAIA_IO_BASE + 0x00004C},
#define ZEUS_ADDR(x) (ZEUS_IO_BASE + (x))
-const struct register_map zeus_register_map __initdata = {
+const struct register_map zeus_register_map __initconst = {
.eic_slow0_strt_add = {.phys = ZEUS_ADDR(0x000000)},
.eic_cfg_bits = {.phys = ZEUS_ADDR(0x000038)},
.eic_ready_status = {.phys = ZEUS_ADDR(0x00004c)},
return err;
}
-static void __init quirk_slc90e66_bridge(struct pci_dev *dev)
+static void __devinit quirk_slc90e66_bridge(struct pci_dev *dev)
{
int irq; /* PCI/ISA Bridge interrupt */
u8 reg_64;
#define PTRACE_GETFPREGS 14
#define PTRACE_SETFPREGS 15
-/* options set using PTRACE_SETOPTIONS */
-#define PTRACE_O_TRACESYSGOOD 0x00000001
-
#ifdef __KERNEL__
#define user_mode(regs) (((regs)->epsw & EPSW_nSL) == EPSW_nSL)
}
#ifndef CONFIG_KGDB
-void arch_release_thread_info(struct thread_info *ti)
+void arch_release_thread_info(struct thread_info *ti);
#endif
#define get_thread_info(ti) get_task_struct((ti)->task)
#define put_thread_info(ti) put_task_struct((ti)->task)
#ifndef _ASM_TIMEX_H
#define _ASM_TIMEX_H
-#include <asm/hardirq.h>
#include <unit/timex.h>
#define TICK_SIZE (tick_nsec / 1000)
extern int init_clockevents(void);
extern int init_clocksource(void);
-static inline void setup_jiffies_interrupt(int irq,
- struct irqaction *action)
-{
- u16 tmp;
- setup_irq(irq, action);
- set_intr_level(irq, NUM2GxICR_LEVEL(CONFIG_TIMER_IRQ_LEVEL));
- GxICR(irq) |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST;
- tmp = GxICR(irq);
-}
-
#endif /* __KERNEL__ */
#endif /* _ASM_TIMEX_H */
{
}
+static inline void setup_jiffies_interrupt(int irq,
+ struct irqaction *action)
+{
+ u16 tmp;
+ setup_irq(irq, action);
+ set_intr_level(irq, NUM2GxICR_LEVEL(CONFIG_TIMER_IRQ_LEVEL));
+ GxICR(irq) |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST;
+ tmp = GxICR(irq);
+}
+
int __init init_clockevents(void)
{
struct clock_event_device *cd;
* 2 of the Licence, or (at your option) any later version.
*/
+#include <linux/irqreturn.h>
+
struct clocksource;
struct clock_event_device;
case SC1TXIRQ:
#ifdef CONFIG_MN10300_TTYSM1_TIMER12
case TM12IRQ:
-#elif CONFIG_MN10300_TTYSM1_TIMER9
+#elif defined(CONFIG_MN10300_TTYSM1_TIMER9)
case TM9IRQ:
-#elif CONFIG_MN10300_TTYSM1_TIMER3
+#elif defined(CONFIG_MN10300_TTYSM1_TIMER3)
case TM3IRQ:
#endif /* CONFIG_MN10300_TTYSM1_TIMER12 */
#endif /* CONFIG_MN10300_TTYSM1 */
else
ret = setup_frame(sig, ka, oldset, regs);
if (ret)
- return;
+ return ret;
signal_delivered(sig, info, ka, regs,
- test_thread_flag(TIF_SINGLESTEP));
+ test_thread_flag(TIF_SINGLESTEP));
+ return 0;
}
/*
#include <linux/kdebug.h>
#include <linux/bug.h>
#include <linux/irq.h>
+#include <linux/export.h>
#include <asm/processor.h>
#include <linux/uaccess.h>
#include <asm/io.h>
#include <linux/string.h>
#include <linux/pci.h>
#include <linux/gfp.h>
+#include <linux/export.h>
#include <asm/io.h>
static unsigned long pci_sram_allocated = 0xbc000000;
#ifndef _ASM_UNIT_TIMEX_H
#define _ASM_UNIT_TIMEX_H
-#ifndef __ASSEMBLY__
-#include <linux/irq.h>
-#endif /* __ASSEMBLY__ */
-
#include <asm/timer-regs.h>
#include <unit/clock.h>
#include <asm/param.h>
#include <linux/platform_device.h>
#include <asm/io.h>
+#include <asm/irq.h>
#include <asm/timex.h>
#include <asm/processor.h>
#include <asm/intctl-regs.h>
#ifndef _ASM_UNIT_TIMEX_H
#define _ASM_UNIT_TIMEX_H
-#ifndef __ASSEMBLY__
-#include <linux/irq.h>
-#endif /* __ASSEMBLY__ */
-
#include <asm/timer-regs.h>
#include <unit/clock.h>
#include <asm/param.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <asm/io.h>
+#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/processor.h>
#include <asm/intctl-regs.h>
#ifndef _ASM_UNIT_TIMEX_H
#define _ASM_UNIT_TIMEX_H
-#ifndef __ASSEMBLY__
-#include <linux/irq.h>
-#endif /* __ASSEMBLY__ */
-
#include <asm/timer-regs.h>
#include <unit/clock.h>
#include <asm/param.h>
NM = sh $(srctree)/arch/parisc/nm
CHECKFLAGS += -D__hppa__=1
+LIBGCC = $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
MACHINE := $(shell uname -m)
ifeq ($(MACHINE),parisc*)
kernel-$(CONFIG_HPUX) += hpux/
core-y += $(addprefix arch/parisc/, $(kernel-y))
-libs-y += arch/parisc/lib/ `$(CC) -print-libgcc-file-name`
+libs-y += arch/parisc/lib/ $(LIBGCC)
drivers-$(CONFIG_OPROFILE) += arch/parisc/oprofile/
include include/asm-generic/Kbuild.asm
header-y += pdc.h
+generic-y += word-at-a-time.h
#ifndef _PARISC_BUG_H
#define _PARISC_BUG_H
+#include <linux/kernel.h> /* for BUGFLAG_TAINT */
+
/*
* Tell the user there is some problem.
* The offending file and line are encoded in the __bug_table section.
}
#ifdef CONFIG_PPC_BOOK3E
-#define __hard_irq_enable() asm volatile("wrteei 1" : : : "memory");
-#define __hard_irq_disable() asm volatile("wrteei 0" : : : "memory");
+#define __hard_irq_enable() asm volatile("wrteei 1" : : : "memory")
+#define __hard_irq_disable() asm volatile("wrteei 0" : : : "memory")
#else
#define __hard_irq_enable() __mtmsrd(local_paca->kernel_msr | MSR_EE, 1)
#define __hard_irq_disable() __mtmsrd(local_paca->kernel_msr, 1)
get_paca()->irq_happened |= PACA_IRQ_HARD_DIS;
}
+/* include/linux/interrupt.h needs hard_irq_disable to be a macro */
+#define hard_irq_disable hard_irq_disable
+
+static inline bool lazy_irq_pending(void)
+{
+ return !!(get_paca()->irq_happened & ~PACA_IRQ_HARD_DIS);
+}
+
/*
* This is called by asynchronous interrupts to conditionally
* re-enable hard interrupts when soft-disabled after having
return !regs->softe;
}
+extern bool prep_irq_for_idle(void);
+
#else /* CONFIG_PPC64 */
#define SET_MSR_EE(x) mtmsr(x)
mtmsrd r10,1 /* Update machine state */
#endif /* CONFIG_PPC_BOOK3E */
-#ifdef CONFIG_PREEMPT
clrrdi r9,r1,THREAD_SHIFT /* current_thread_info() */
- li r0,_TIF_NEED_RESCHED /* bits to check */
ld r3,_MSR(r1)
ld r4,TI_FLAGS(r9)
- /* Move MSR_PR bit in r3 to _TIF_SIGPENDING position in r0 */
- rlwimi r0,r3,32+TIF_SIGPENDING-MSR_PR_LG,_TIF_SIGPENDING
- and. r0,r4,r0 /* check NEED_RESCHED and maybe SIGPENDING */
- bne do_work
-
-#else /* !CONFIG_PREEMPT */
- ld r3,_MSR(r1) /* Returning to user mode? */
andi. r3,r3,MSR_PR
- beq restore /* if not, just restore regs and return */
+ beq resume_kernel
/* Check current_thread_info()->flags */
+ andi. r0,r4,_TIF_USER_WORK_MASK
+ beq restore
+
+ andi. r0,r4,_TIF_NEED_RESCHED
+ beq 1f
+ bl .restore_interrupts
+ bl .schedule
+ b .ret_from_except_lite
+
+1: bl .save_nvgprs
+ bl .restore_interrupts
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .do_notify_resume
+ b .ret_from_except
+
+resume_kernel:
+#ifdef CONFIG_PREEMPT
+ /* Check if we need to preempt */
+ andi. r0,r4,_TIF_NEED_RESCHED
+ beq+ restore
+ /* Check that preempt_count() == 0 and interrupts are enabled */
+ lwz r8,TI_PREEMPT(r9)
+ cmpwi cr1,r8,0
+ ld r0,SOFTE(r1)
+ cmpdi r0,0
+ crandc eq,cr1*4+eq,eq
+ bne restore
+
+ /*
+ * Here we are preempting the current task. We want to make
+ * sure we are soft-disabled first
+ */
+ SOFT_DISABLE_INTS(r3,r4)
+1: bl .preempt_schedule_irq
+
+ /* Re-test flags and eventually loop */
clrrdi r9,r1,THREAD_SHIFT
ld r4,TI_FLAGS(r9)
- andi. r0,r4,_TIF_USER_WORK_MASK
- bne do_work
-#endif /* !CONFIG_PREEMPT */
+ andi. r0,r4,_TIF_NEED_RESCHED
+ bne 1b
+#endif /* CONFIG_PREEMPT */
.globl fast_exc_return_irq
fast_exc_return_irq:
#endif /* CONFIG_PPC_BOOK3E */
1: b .ret_from_except /* What else to do here ? */
-
-
-3:
-do_work:
-#ifdef CONFIG_PREEMPT
- andi. r0,r3,MSR_PR /* Returning to user mode? */
- bne user_work
- /* Check that preempt_count() == 0 and interrupts are enabled */
- lwz r8,TI_PREEMPT(r9)
- cmpwi cr1,r8,0
- ld r0,SOFTE(r1)
- cmpdi r0,0
- crandc eq,cr1*4+eq,eq
- bne restore
-
- /*
- * Here we are preempting the current task. We want to make
- * sure we are soft-disabled first
- */
- SOFT_DISABLE_INTS(r3,r4)
-1: bl .preempt_schedule_irq
-
- /* Re-test flags and eventually loop */
- clrrdi r9,r1,THREAD_SHIFT
- ld r4,TI_FLAGS(r9)
- andi. r0,r4,_TIF_NEED_RESCHED
- bne 1b
- b restore
-
-user_work:
-#endif /* CONFIG_PREEMPT */
-
- andi. r0,r4,_TIF_NEED_RESCHED
- beq 1f
- bl .restore_interrupts
- bl .schedule
- b .ret_from_except_lite
-
-1: bl .save_nvgprs
- bl .restore_interrupts
- addi r3,r1,STACK_FRAME_OVERHEAD
- bl .do_notify_resume
- b .ret_from_except
-
unrecov_restore:
addi r3,r1,STACK_FRAME_OVERHEAD
bl .unrecoverable_exception
*/
if (unlikely(irq_happened != PACA_IRQ_HARD_DIS))
__hard_irq_disable();
-#ifdef CONFIG_TRACE_IRQFLAG
+#ifdef CONFIG_TRACE_IRQFLAGS
else {
/*
* We should already be hard disabled here. We had bugs
* NOTE: This is called with interrupts hard disabled but not marked
* as such in paca->irq_happened, so we need to resync this.
*/
-void restore_interrupts(void)
+void notrace restore_interrupts(void)
{
if (irqs_disabled()) {
local_paca->irq_happened |= PACA_IRQ_HARD_DIS;
__hard_irq_enable();
}
+/*
+ * This is a helper to use when about to go into idle low-power
+ * when the latter has the side effect of re-enabling interrupts
+ * (such as calling H_CEDE under pHyp).
+ *
+ * You call this function with interrupts soft-disabled (this is
+ * already the case when ppc_md.power_save is called). The function
+ * will return whether to enter power save or just return.
+ *
+ * In the former case, it will have notified lockdep of interrupts
+ * being re-enabled and generally sanitized the lazy irq state,
+ * and in the latter case it will leave with interrupts hard
+ * disabled and marked as such, so the local_irq_enable() call
+ * in cpu_idle() will properly re-enable everything.
+ */
+bool prep_irq_for_idle(void)
+{
+ /*
+ * First we need to hard disable to ensure no interrupt
+ * occurs before we effectively enter the low power state
+ */
+ hard_irq_disable();
+
+ /*
+ * If anything happened while we were soft-disabled,
+ * we return now and do not enter the low power state.
+ */
+ if (lazy_irq_pending())
+ return false;
+
+ /* Tell lockdep we are about to re-enable */
+ trace_hardirqs_on();
+
+ /*
+ * Mark interrupts as soft-enabled and clear the
+ * PACA_IRQ_HARD_DIS from the pending mask since we
+ * are about to hard enable as well as a side effect
+ * of entering the low power state.
+ */
+ local_paca->irq_happened &= ~PACA_IRQ_HARD_DIS;
+ local_paca->soft_enabled = 1;
+
+ /* Tell the caller to enter the low power state */
+ return true;
+}
+
#endif /* CONFIG_PPC64 */
int arch_show_interrupts(struct seq_file *p, int prec)
static inline int entry_matches(struct ppc_plt_entry *entry, Elf32_Addr val)
{
- if (entry->jump[0] == 0x3d600000 + ((val + 0x8000) >> 16)
- && entry->jump[1] == 0x396b0000 + (val & 0xffff))
+ if (entry->jump[0] == 0x3d800000 + ((val + 0x8000) >> 16)
+ && entry->jump[1] == 0x398c0000 + (val & 0xffff))
return 1;
return 0;
}
entry++;
}
- /* Stolen from Paul Mackerras as well... */
- entry->jump[0] = 0x3d600000+((val+0x8000)>>16); /* lis r11,sym@ha */
- entry->jump[1] = 0x396b0000 + (val&0xffff); /* addi r11,r11,sym@l*/
- entry->jump[2] = 0x7d6903a6; /* mtctr r11 */
+ entry->jump[0] = 0x3d800000+((val+0x8000)>>16); /* lis r12,sym@ha */
+ entry->jump[1] = 0x398c0000 + (val&0xffff); /* addi r12,r12,sym@l*/
+ entry->jump[2] = 0x7d8903a6; /* mtctr r12 */
entry->jump[3] = 0x4e800420; /* bctr */
DEBUGP("Initialized plt for 0x%x at %p\n", val, entry);
extern char opal_secondary_entry;
-static void prom_query_opal(void)
+static void __init prom_query_opal(void)
{
long rc;
prom_debug("prom_opal_hold_cpus: end...\n");
}
-static void prom_opal_takeover(void)
+static void __init prom_opal_takeover(void)
{
struct opal_secondary_data *data = &RELOC(opal_secondary_data);
struct opal_takeover_args *args = &data->args;
struct pt_regs *old_regs;
u64 *next_tb = &__get_cpu_var(decrementers_next_tb);
struct clock_event_device *evt = &__get_cpu_var(decrementers);
+ u64 now;
/* Ensure a positive value is written to the decrementer, or else
* some CPUs will continue to take decrementer exceptions.
irq_work_run();
}
- *next_tb = ~(u64)0;
- if (evt->event_handler)
- evt->event_handler(evt);
+ now = get_tb_or_rtc();
+ if (now >= *next_tb) {
+ *next_tb = ~(u64)0;
+ if (evt->event_handler)
+ evt->event_handler(evt);
+ } else {
+ now = *next_tb - now;
+ if (now <= DECREMENTER_MAX)
+ set_dec((int)now);
+ }
#ifdef CONFIG_PPC64
/* collect purr register values often, for accurate calculations */
return err;
}
-static void kvmppc_update_vpa(struct kvm *kvm, struct kvmppc_vpa *vpap)
+static void kvmppc_update_vpa(struct kvm_vcpu *vcpu, struct kvmppc_vpa *vpap)
{
+ struct kvm *kvm = vcpu->kvm;
void *va;
unsigned long nb;
+ unsigned long gpa;
- vpap->update_pending = 0;
- va = NULL;
- if (vpap->next_gpa) {
- va = kvmppc_pin_guest_page(kvm, vpap->next_gpa, &nb);
- if (nb < vpap->len) {
- /*
- * If it's now too short, it must be that userspace
- * has changed the mappings underlying guest memory,
- * so unregister the region.
- */
+ /*
+ * We need to pin the page pointed to by vpap->next_gpa,
+ * but we can't call kvmppc_pin_guest_page under the lock
+ * as it does get_user_pages() and down_read(). So we
+ * have to drop the lock, pin the page, then get the lock
+ * again and check that a new area didn't get registered
+ * in the meantime.
+ */
+ for (;;) {
+ gpa = vpap->next_gpa;
+ spin_unlock(&vcpu->arch.vpa_update_lock);
+ va = NULL;
+ nb = 0;
+ if (gpa)
+ va = kvmppc_pin_guest_page(kvm, vpap->next_gpa, &nb);
+ spin_lock(&vcpu->arch.vpa_update_lock);
+ if (gpa == vpap->next_gpa)
+ break;
+ /* sigh... unpin that one and try again */
+ if (va)
kvmppc_unpin_guest_page(kvm, va);
- va = NULL;
- }
+ }
+
+ vpap->update_pending = 0;
+ if (va && nb < vpap->len) {
+ /*
+ * If it's now too short, it must be that userspace
+ * has changed the mappings underlying guest memory,
+ * so unregister the region.
+ */
+ kvmppc_unpin_guest_page(kvm, va);
+ va = NULL;
}
if (vpap->pinned_addr)
kvmppc_unpin_guest_page(kvm, vpap->pinned_addr);
static void kvmppc_update_vpas(struct kvm_vcpu *vcpu)
{
- struct kvm *kvm = vcpu->kvm;
-
spin_lock(&vcpu->arch.vpa_update_lock);
if (vcpu->arch.vpa.update_pending) {
- kvmppc_update_vpa(kvm, &vcpu->arch.vpa);
+ kvmppc_update_vpa(vcpu, &vcpu->arch.vpa);
init_vpa(vcpu, vcpu->arch.vpa.pinned_addr);
}
if (vcpu->arch.dtl.update_pending) {
- kvmppc_update_vpa(kvm, &vcpu->arch.dtl);
+ kvmppc_update_vpa(vcpu, &vcpu->arch.dtl);
vcpu->arch.dtl_ptr = vcpu->arch.dtl.pinned_addr;
vcpu->arch.dtl_index = 0;
}
if (vcpu->arch.slb_shadow.update_pending)
- kvmppc_update_vpa(kvm, &vcpu->arch.slb_shadow);
+ kvmppc_update_vpa(vcpu, &vcpu->arch.slb_shadow);
spin_unlock(&vcpu->arch.vpa_update_lock);
}
struct kvm_vcpu *vcpu, *vcpu0, *vnext;
long ret;
u64 now;
- int ptid, i;
+ int ptid, i, need_vpa_update;
/* don't start if any threads have a signal pending */
- list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list)
+ need_vpa_update = 0;
+ list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list) {
if (signal_pending(vcpu->arch.run_task))
return 0;
+ need_vpa_update |= vcpu->arch.vpa.update_pending |
+ vcpu->arch.slb_shadow.update_pending |
+ vcpu->arch.dtl.update_pending;
+ }
+
+ /*
+ * Initialize *vc, in particular vc->vcore_state, so we can
+ * drop the vcore lock if necessary.
+ */
+ vc->n_woken = 0;
+ vc->nap_count = 0;
+ vc->entry_exit_count = 0;
+ vc->vcore_state = VCORE_RUNNING;
+ vc->in_guest = 0;
+ vc->napping_threads = 0;
+
+ /*
+ * Updating any of the vpas requires calling kvmppc_pin_guest_page,
+ * which can't be called with any spinlocks held.
+ */
+ if (need_vpa_update) {
+ spin_unlock(&vc->lock);
+ list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list)
+ kvmppc_update_vpas(vcpu);
+ spin_lock(&vc->lock);
+ }
/*
* Make sure we are running on thread 0, and that
if (vcpu->arch.ceded)
vcpu->arch.ptid = ptid++;
- vc->n_woken = 0;
- vc->nap_count = 0;
- vc->entry_exit_count = 0;
- vc->vcore_state = VCORE_RUNNING;
vc->stolen_tb += mftb() - vc->preempt_tb;
- vc->in_guest = 0;
vc->pcpu = smp_processor_id();
- vc->napping_threads = 0;
list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list) {
kvmppc_start_thread(vcpu);
- if (vcpu->arch.vpa.update_pending ||
- vcpu->arch.slb_shadow.update_pending ||
- vcpu->arch.dtl.update_pending)
- kvmppc_update_vpas(vcpu);
kvmppc_create_dtl_entry(vcpu, vc);
}
/* Grab any remaining hw threads so they can't go into the kernel */
lwz r3,VCORE_NAPPING_THREADS(r5)
lwz r4,VCPU_PTID(r9)
li r0,1
- sldi r0,r0,r4
+ sld r0,r0,r4
andc. r3,r3,r0 /* no sense IPI'ing ourselves */
beq 43f
mulli r4,r4,PACA_SIZE /* get paca for thread 0 */
case H_PUT_TCE:
return kvmppc_h_pr_put_tce(vcpu);
case H_CEDE:
+ vcpu->arch.shared->msr |= MSR_EE;
kvm_vcpu_block(vcpu);
clear_bit(KVM_REQ_UNHALT, &vcpu->requests);
vcpu->stat.halt_wakeup++;
*/
static void __init parse_drconf_memory(struct device_node *memory)
{
- const u32 *dm, *usm;
+ const u32 *uninitialized_var(dm), *usm;
unsigned int n, rc, ranges, is_kexec_kdump = 0;
unsigned long lmb_size, base, size, sz;
int nid;
- struct assoc_arrays aa;
+ struct assoc_arrays aa = { .arrays = NULL };
n = of_get_drconf_memory(memory, &dm);
if (!n)
mr r4, r_addr; \
li r6, SIZE; \
bl skb_copy_bits; \
+ nop; \
/* R3 = 0 on success */ \
addi r1, r1, BPF_PPC_SLOWPATH_FRAME; \
ld r0, 16(r1); \
mr r4, r_addr; \
li r5, SIZE; \
bl bpf_internal_load_pointer_neg_helper; \
+ nop; \
/* R3 != 0 on success */ \
addi r1, r1, BPF_PPC_SLOWPATH_FRAME; \
ld r0, 16(r1); \
{
unsigned long ctrl, thread_switch_control;
- /*
- * We need to hard disable interrupts, the local_irq_enable() done by
- * our caller upon return will hard re-enable.
- */
- hard_irq_disable();
+ /* Ensure our interrupt state is properly tracked */
+ if (!prep_irq_for_idle())
+ return;
ctrl = mfspr(SPRN_CTRLF);
*/
ctrl &= ~(CTRL_RUNLATCH | CTRL_TE);
mtspr(SPRN_CTRLT, ctrl);
+
+ /* Re-enable interrupts in MSR */
+ __hard_irq_enable();
}
static int cbe_system_reset_exception(struct pt_regs *regs)
tcep++;
}
- if (tbl->it_type == TCE_PCI_SWINV_CREATE)
+ if (tbl->it_type & TCE_PCI_SWINV_CREATE)
tce_invalidate_pSeries_sw(tbl, tces, tcep - 1);
return 0;
}
while (npages--)
*(tcep++) = 0;
- if (tbl->it_type == TCE_PCI_SWINV_FREE)
+ if (tbl->it_type & TCE_PCI_SWINV_FREE)
tce_invalidate_pSeries_sw(tbl, tces, tcep - 1);
}
};
static void oops_to_nvram(struct kmsg_dumper *dumper,
- enum kmsg_dump_reason reason,
- const char *old_msgs, unsigned long old_len,
- const char *new_msgs, unsigned long new_len);
+ enum kmsg_dump_reason reason);
static struct kmsg_dumper nvram_kmsg_dumper = {
.dump = oops_to_nvram
return 0;
}
-/*
- * Try to capture the last capture_len bytes of the printk buffer. Return
- * the amount actually captured.
- */
-static size_t capture_last_msgs(const char *old_msgs, size_t old_len,
- const char *new_msgs, size_t new_len,
- char *captured, size_t capture_len)
-{
- if (new_len >= capture_len) {
- memcpy(captured, new_msgs + (new_len - capture_len),
- capture_len);
- return capture_len;
- } else {
- /* Grab the end of old_msgs. */
- size_t old_tail_len = min(old_len, capture_len - new_len);
- memcpy(captured, old_msgs + (old_len - old_tail_len),
- old_tail_len);
- memcpy(captured + old_tail_len, new_msgs, new_len);
- return old_tail_len + new_len;
- }
-}
-
/*
* Are we using the ibm,rtas-log for oops/panic reports? And if so,
* would logging this oops/panic overwrite an RTAS event that rtas_errd
NVRAM_RTAS_READ_TIMEOUT);
}
-/* Squeeze out each line's <n> severity prefix. */
-static size_t elide_severities(char *buf, size_t len)
-{
- char *in, *out, *buf_end = buf + len;
- /* Assume a <n> at the very beginning marks the start of a line. */
- int newline = 1;
-
- in = out = buf;
- while (in < buf_end) {
- if (newline && in+3 <= buf_end &&
- *in == '<' && isdigit(in[1]) && in[2] == '>') {
- in += 3;
- newline = 0;
- } else {
- newline = (*in == '\n');
- *out++ = *in++;
- }
- }
- return out - buf;
-}
-
/* Derived from logfs_compress() */
static int nvram_compress(const void *in, void *out, size_t inlen,
size_t outlen)
* partition. If that's too much, go back and capture uncompressed text.
*/
static void oops_to_nvram(struct kmsg_dumper *dumper,
- enum kmsg_dump_reason reason,
- const char *old_msgs, unsigned long old_len,
- const char *new_msgs, unsigned long new_len)
+ enum kmsg_dump_reason reason)
{
static unsigned int oops_count = 0;
static bool panicking = false;
return;
if (big_oops_buf) {
- text_len = capture_last_msgs(old_msgs, old_len,
- new_msgs, new_len, big_oops_buf, big_oops_buf_sz);
- text_len = elide_severities(big_oops_buf, text_len);
+ kmsg_dump_get_buffer(dumper, false,
+ big_oops_buf, big_oops_buf_sz, &text_len);
rc = zip_oops(text_len);
}
if (rc != 0) {
- text_len = capture_last_msgs(old_msgs, old_len,
- new_msgs, new_len, oops_data, oops_data_sz);
+ kmsg_dump_rewind(dumper);
+ kmsg_dump_get_buffer(dumper, true,
+ oops_data, oops_data_sz, &text_len);
err_type = ERR_TYPE_KERNEL_PANIC;
*oops_len = (u16) text_len;
}
static void check_and_cede_processor(void)
{
/*
- * Interrupts are soft-disabled at this point,
- * but not hard disabled. So an interrupt might have
- * occurred before entering NAP, and would be potentially
- * lost (edge events, decrementer events, etc...) unless
- * we first hard disable then check.
+ * Ensure our interrupt state is properly tracked,
+ * also checks if no interrupt has occurred while we
+ * were soft-disabled
*/
- hard_irq_disable();
- if (get_paca()->irq_happened == 0)
+ if (prep_irq_for_idle()) {
cede_processor();
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* Ensure that H_CEDE returns with IRQs on */
+ if (WARN_ON(!(mfmsr() & MSR_EE)))
+ __hard_irq_enable();
+#endif
+ }
}
static int dedicated_cede_loop(struct cpuidle_device *dev,
/* print cpus waiting or in xmon */
printf("cpus stopped:");
count = 0;
- for (cpu = 0; cpu < NR_CPUS; ++cpu) {
+ for_each_possible_cpu(cpu) {
if (cpumask_test_cpu(cpu, &cpus_in_xmon)) {
if (count == 0)
printf(" %x", cpu);
select GENERIC_SMP_IDLE_THREAD
select GENERIC_CLOCKEVENTS
select GENERIC_CMOS_UPDATE if SH_SH03 || SH_DREAMCAST
+ select GENERIC_STRNCPY_FROM_USER
+ select GENERIC_STRNLEN_USER
help
The SuperH is a RISC processor targeted for use in embedded systems
and consumer electronics; it was also used in the Sega Dreamcast
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
+ifneq ($(SUBARCH),$(ARCH))
+ ifeq ($(CROSS_COMPILE),)
+ CROSS_COMPILE := $(call cc-cross-prefix, $(UTS_MACHINE)-linux- $(UTS_MACHINE)-linux-gnu- $(UTS_MACHINE)-unknown-linux-gnu-)
+ endif
+endif
+
isa-y := any
isa-$(CONFIG_SH_DSP) := sh
isa-$(CONFIG_CPU_SH2) := sh2
KBUILD_DEFCONFIG := cayman_defconfig
endif
-ifneq ($(SUBARCH),$(ARCH))
- ifeq ($(CROSS_COMPILE),)
- CROSS_COMPILE := $(call cc-cross-prefix, $(UTS_MACHINE)-linux- $(UTS_MACHINE)-linux-gnu- $(UTS_MACHINE)-unknown-linux-gnu-)
- endif
-endif
-
ifdef CONFIG_CPU_LITTLE_ENDIAN
ld-bfd := elf32-$(UTS_MACHINE)-linux
-LDFLAGS_vmlinux += --defsym 'jiffies=jiffies_64' --oformat $(ld-bfd)
+LDFLAGS_vmlinux += --defsym jiffies=jiffies_64 --oformat $(ld-bfd)
LDFLAGS += -EL
else
ld-bfd := elf32-$(UTS_MACHINE)big-linux
-LDFLAGS_vmlinux += --defsym 'jiffies=jiffies_64+4' --oformat $(ld-bfd)
+LDFLAGS_vmlinux += --defsym jiffies=jiffies_64+4 --oformat $(ld-bfd)
LDFLAGS += -EB
endif
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = evtirq(0xa20),
- .end = evtirq(0xa20),
+ .start = evt2irq(0xa20),
+ .end = evt2irq(0xa20),
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
},
};
clk->enable_reg = (void __iomem *)(chan->reg_base + SH4A_PCIEPHYCTLR);
clk->enable_bit = BITS_CKE;
- ret = sh_clk_mstp32_register(clk, 1);
+ ret = sh_clk_mstp_register(clk, 1);
if (unlikely(ret < 0))
goto err_phy;
include include/asm-generic/Kbuild.asm
+generic-y += bitsperlong.h
+generic-y += cputime.h
+generic-y += current.h
+generic-y += delay.h
+generic-y += div64.h
+generic-y += emergency-restart.h
+generic-y += errno.h
+generic-y += fcntl.h
+generic-y += ioctl.h
+generic-y += ipcbuf.h
+generic-y += irq_regs.h
+generic-y += kvm_para.h
+generic-y += local.h
+generic-y += local64.h
+generic-y += param.h
+generic-y += parport.h
+generic-y += percpu.h
+generic-y += poll.h
+generic-y += mman.h
+generic-y += msgbuf.h
+generic-y += resource.h
+generic-y += scatterlist.h
+generic-y += sembuf.h
+generic-y += serial.h
+generic-y += shmbuf.h
+generic-y += siginfo.h
+generic-y += sizes.h
+generic-y += socket.h
+generic-y += statfs.h
+generic-y += termbits.h
+generic-y += termios.h
+generic-y += ucontext.h
+generic-y += xor.h
+
header-y += cachectl.h
header-y += cpu-features.h
header-y += hw_breakpoint.h
+++ /dev/null
-#include <asm-generic/bitsperlong.h>
+++ /dev/null
-#ifndef __SH_CPUTIME_H
-#define __SH_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* __SH_CPUTIME_H */
+++ /dev/null
-#include <asm-generic/current.h>
+++ /dev/null
-#include <asm-generic/delay.h>
+++ /dev/null
-#include <asm-generic/div64.h>
+++ /dev/null
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* _ASM_EMERGENCY_RESTART_H */
+++ /dev/null
-#ifndef __ASM_SH_ERRNO_H
-#define __ASM_SH_ERRNO_H
-
-#include <asm-generic/errno.h>
-
-#endif /* __ASM_SH_ERRNO_H */
+++ /dev/null
-#include <asm-generic/fcntl.h>
return -1;
}
-#define outb(x, y) BUG()
-#define outw(x, y) BUG()
-#define outl(x, y) BUG()
+static inline void outb(unsigned char x, unsigned long port)
+{
+ BUG();
+}
+
+static inline void outw(unsigned short x, unsigned long port)
+{
+ BUG();
+}
+
+static inline void outl(unsigned int x, unsigned long port)
+{
+ BUG();
+}
#define inb_p(addr) inb(addr)
#define inw_p(addr) inw(addr)
+++ /dev/null
-#include <asm-generic/ioctl.h>
+++ /dev/null
-#include <asm-generic/ipcbuf.h>
+++ /dev/null
-#include <asm-generic/irq_regs.h>
+++ /dev/null
-#include <asm-generic/kvm_para.h>
+++ /dev/null
-#ifndef __ASM_SH_LOCAL_H
-#define __ASM_SH_LOCAL_H
-
-#include <asm-generic/local.h>
-
-#endif /* __ASM_SH_LOCAL_H */
-
+++ /dev/null
-#include <asm-generic/local64.h>
+++ /dev/null
-#include <asm-generic/mman.h>
+++ /dev/null
-#include <asm-generic/msgbuf.h>
+++ /dev/null
-#include <asm-generic/param.h>
+++ /dev/null
-#include <asm-generic/parport.h>
+++ /dev/null
-#ifndef __ARCH_SH_PERCPU
-#define __ARCH_SH_PERCPU
-
-#include <asm-generic/percpu.h>
-
-#endif /* __ARCH_SH_PERCPU */
+++ /dev/null
-#include <asm-generic/poll.h>
+++ /dev/null
-#ifndef __ASM_SH_RESOURCE_H
-#define __ASM_SH_RESOURCE_H
-
-#include <asm-generic/resource.h>
-
-#endif /* __ASM_SH_RESOURCE_H */
+++ /dev/null
-#ifndef __ASM_SH_SCATTERLIST_H
-#define __ASM_SH_SCATTERLIST_H
-
-#include <asm-generic/scatterlist.h>
-
-#endif /* __ASM_SH_SCATTERLIST_H */
+++ /dev/null
-#include <asm-generic/sembuf.h>
+++ /dev/null
-#include <asm-generic/serial.h>
+++ /dev/null
-#include <asm-generic/shmbuf.h>
+++ /dev/null
-#ifndef __ASM_SH_SIGINFO_H
-#define __ASM_SH_SIGINFO_H
-
-#include <asm-generic/siginfo.h>
-
-#endif /* __ASM_SH_SIGINFO_H */
+++ /dev/null
-#include <asm-generic/sizes.h>
+++ /dev/null
-#include <asm-generic/socket.h>
+++ /dev/null
-#ifndef __ASM_SH_STATFS_H
-#define __ASM_SH_STATFS_H
-
-#include <asm-generic/statfs.h>
-
-#endif /* __ASM_SH_STATFS_H */
+++ /dev/null
-#include <asm-generic/termbits.h>
+++ /dev/null
-#include <asm-generic/termios.h>
(__chk_user_ptr(addr), \
__access_ok((unsigned long __force)(addr), (size)))
+#define user_addr_max() (current_thread_info()->addr_limit.seg)
+
/*
* Uh, these should become the main single-value transfer routines ...
* They automatically use the right size if we just have the right
# include "uaccess_64.h"
#endif
+extern long strncpy_from_user(char *dest, const char __user *src, long count);
+
+extern __must_check long strlen_user(const char __user *str);
+extern __must_check long strnlen_user(const char __user *str, long n);
+
/* Generic arbitrary sized copy. */
/* Return the number of bytes NOT copied */
__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n);
__cl_size; \
})
-/**
- * strncpy_from_user: - Copy a NUL terminated string from userspace.
- * @dst: Destination address, in kernel space. This buffer must be at
- * least @count bytes long.
- * @src: Source address, in user space.
- * @count: Maximum number of bytes to copy, including the trailing NUL.
- *
- * Copies a NUL-terminated string from userspace to kernel space.
- *
- * On success, returns the length of the string (not including the trailing
- * NUL).
- *
- * If access to userspace fails, returns -EFAULT (some data may have been
- * copied).
- *
- * If @count is smaller than the length of the string, copies @count bytes
- * and returns @count.
- */
-#define strncpy_from_user(dest,src,count) \
-({ \
- unsigned long __sfu_src = (unsigned long)(src); \
- int __sfu_count = (int)(count); \
- long __sfu_res = -EFAULT; \
- \
- if (__access_ok(__sfu_src, __sfu_count)) \
- __sfu_res = __strncpy_from_user((unsigned long)(dest), \
- __sfu_src, __sfu_count); \
- \
- __sfu_res; \
-})
-
static inline unsigned long
copy_from_user(void *to, const void __user *from, unsigned long n)
{
return __copy_size;
}
-/**
- * strnlen_user: - Get the size of a string in user space.
- * @s: The string to measure.
- * @n: The maximum valid length
- *
- * Context: User context only. This function may sleep.
- *
- * Get the size of a NUL-terminated string in user space.
- *
- * Returns the size of the string INCLUDING the terminating NUL.
- * On exception, returns 0.
- * If the string is too long, returns a value greater than @n.
- */
-static inline long strnlen_user(const char __user *s, long n)
-{
- if (!__addr_ok(s))
- return 0;
- else
- return __strnlen_user(s, n);
-}
-
-/**
- * strlen_user: - Get the size of a string in user space.
- * @str: The string to measure.
- *
- * Context: User context only. This function may sleep.
- *
- * Get the size of a NUL-terminated string in user space.
- *
- * Returns the size of the string INCLUDING the terminating NUL.
- * On exception, returns 0.
- *
- * If there is a limit on the length of a valid string, you may wish to
- * consider using strnlen_user() instead.
- */
-#define strlen_user(str) strnlen_user(str, ~0UL >> 1)
-
/*
* The exception table consists of pairs of addresses: the first is the
* address of an instruction that is allowed to fault, and the second is
extern void __put_user_unknown(void);
-static inline int
-__strncpy_from_user(unsigned long __dest, unsigned long __user __src, int __count)
-{
- __kernel_size_t res;
- unsigned long __dummy, _d, _s, _c;
-
- __asm__ __volatile__(
- "9:\n"
- "mov.b @%2+, %1\n\t"
- "cmp/eq #0, %1\n\t"
- "bt/s 2f\n"
- "1:\n"
- "mov.b %1, @%3\n\t"
- "dt %4\n\t"
- "bf/s 9b\n\t"
- " add #1, %3\n\t"
- "2:\n\t"
- "sub %4, %0\n"
- "3:\n"
- ".section .fixup,\"ax\"\n"
- "4:\n\t"
- "mov.l 5f, %1\n\t"
- "jmp @%1\n\t"
- " mov %9, %0\n\t"
- ".balign 4\n"
- "5: .long 3b\n"
- ".previous\n"
- ".section __ex_table,\"a\"\n"
- " .balign 4\n"
- " .long 9b,4b\n"
- ".previous"
- : "=r" (res), "=&z" (__dummy), "=r" (_s), "=r" (_d), "=r"(_c)
- : "0" (__count), "2" (__src), "3" (__dest), "4" (__count),
- "i" (-EFAULT)
- : "memory", "t");
-
- return res;
-}
-
-/*
- * Return the size of a string (including the ending 0 even when we have
- * exceeded the maximum string length).
- */
-static inline long __strnlen_user(const char __user *__s, long __n)
-{
- unsigned long res;
- unsigned long __dummy;
-
- __asm__ __volatile__(
- "1:\t"
- "mov.b @(%0,%3), %1\n\t"
- "cmp/eq %4, %0\n\t"
- "bt/s 2f\n\t"
- " add #1, %0\n\t"
- "tst %1, %1\n\t"
- "bf 1b\n\t"
- "2:\n"
- ".section .fixup,\"ax\"\n"
- "3:\n\t"
- "mov.l 4f, %1\n\t"
- "jmp @%1\n\t"
- " mov #0, %0\n"
- ".balign 4\n"
- "4: .long 2b\n"
- ".previous\n"
- ".section __ex_table,\"a\"\n"
- " .balign 4\n"
- " .long 1b,3b\n"
- ".previous"
- : "=z" (res), "=&r" (__dummy)
- : "0" (0), "r" (__s), "r" (__n)
- : "t");
- return res;
-}
-
#endif /* __ASM_SH_UACCESS_32_H */
extern long __put_user_asm_q(void *, long);
extern void __put_user_unknown(void);
-extern long __strnlen_user(const char *__s, long __n);
-extern int __strncpy_from_user(unsigned long __dest,
- unsigned long __user __src, int __count);
-
#endif /* __ASM_SH_UACCESS_64_H */
+++ /dev/null
-#include <asm-generic/ucontext.h>
--- /dev/null
+#ifndef __ASM_SH_WORD_AT_A_TIME_H
+#define __ASM_SH_WORD_AT_A_TIME_H
+
+#ifdef CONFIG_CPU_BIG_ENDIAN
+# include <asm-generic/word-at-a-time.h>
+#else
+/*
+ * Little-endian version cribbed from x86.
+ */
+struct word_at_a_time {
+ const unsigned long one_bits, high_bits;
+};
+
+#define WORD_AT_A_TIME_CONSTANTS { REPEAT_BYTE(0x01), REPEAT_BYTE(0x80) }
+
+/* Carl Chatfield / Jan Achrenius G+ version for 32-bit */
+static inline long count_masked_bytes(long mask)
+{
+ /* (000000 0000ff 00ffff ffffff) -> ( 1 1 2 3 ) */
+ long a = (0x0ff0001+mask) >> 23;
+ /* Fix the 1 for 00 case */
+ return a & mask;
+}
+
+/* Return nonzero if it has a zero */
+static inline unsigned long has_zero(unsigned long a, unsigned long *bits, const struct word_at_a_time *c)
+{
+ unsigned long mask = ((a - c->one_bits) & ~a) & c->high_bits;
+ *bits = mask;
+ return mask;
+}
+
+static inline unsigned long prep_zero_mask(unsigned long a, unsigned long bits, const struct word_at_a_time *c)
+{
+ return bits;
+}
+
+static inline unsigned long create_zero_mask(unsigned long bits)
+{
+ bits = (bits - 1) & ~bits;
+ return bits >> 7;
+}
+
+/* The mask we created is directly usable as a bytemask */
+#define zero_bytemask(mask) (mask)
+
+static inline unsigned long find_zero(unsigned long mask)
+{
+ return count_masked_bytes(mask);
+}
+#endif
+
+#endif
+++ /dev/null
-#include <asm-generic/xor.h>
+++ /dev/null
-/*
- * SH-2A UBC definitions
- *
- * Copyright (C) 2008 Kieran Bingham
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef __ASM_CPU_SH2A_UBC_H
-#define __ASM_CPU_SH2A_UBC_H
-
-#define UBC_BARA 0xfffc0400
-#define UBC_BAMRA 0xfffc0404
-#define UBC_BBRA 0xfffc04a0 /* 16 bit access */
-#define UBC_BDRA 0xfffc0408
-#define UBC_BDMRA 0xfffc040c
-
-#define UBC_BARB 0xfffc0410
-#define UBC_BAMRB 0xfffc0414
-#define UBC_BBRB 0xfffc04b0 /* 16 bit access */
-#define UBC_BDRB 0xfffc0418
-#define UBC_BDMRB 0xfffc041c
-
-#define UBC_BRCR 0xfffc04c0
-
-#endif /* __ASM_CPU_SH2A_UBC_H */
#include <linux/serial_core.h>
#include <linux/io.h>
#include <cpu/serial.h>
-#include <asm/gpio.h>
+#include <cpu/gpio.h>
static void sh7720_sci_init_pins(struct uart_port *port, unsigned int cflag)
{
ret = sh_clk_div6_register(div6_clks, DIV6_NR);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+ ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
return ret;
}
ret = sh_clk_div6_register(div6_clks, DIV6_NR);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+ ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
return ret;
}
ret = sh_clk_div6_register(div6_clks, DIV6_NR);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, HWBLK_NR);
+ ret = sh_clk_mstp_register(mstp_clks, HWBLK_NR);
return ret;
}
ret = sh_clk_div6_register(div6_clks, DIV6_NR);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, HWBLK_NR);
+ ret = sh_clk_mstp_register(mstp_clks, HWBLK_NR);
return ret;
}
ret = sh_clk_div6_reparent_register(div6_clks, DIV6_NR);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, HWBLK_NR);
+ ret = sh_clk_mstp_register(mstp_clks, HWBLK_NR);
return ret;
}
&div4_table);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+ ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
return ret;
}
ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
&div4_table);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+ ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
return ret;
}
ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
&div4_table);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+ ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
return ret;
}
ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
&div4_table);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+ ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
return ret;
}
ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
&div4_table);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+ ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
return ret;
}
#endif /* CONFIG_MMU */
-/*
- * int __strncpy_from_user(unsigned long __dest, unsigned long __src,
- * int __count)
- *
- * Inputs:
- * (r2) target address
- * (r3) source address
- * (r4) maximum size in bytes
- *
- * Ouputs:
- * (*r2) copied data
- * (r2) -EFAULT (in case of faulting)
- * copied data (otherwise)
- */
- .global __strncpy_from_user
-__strncpy_from_user:
- pta ___strncpy_from_user1, tr0
- pta ___strncpy_from_user_done, tr1
- or r4, ZERO, r5 /* r5 = original count */
- beq/u r4, r63, tr1 /* early exit if r4==0 */
- movi -(EFAULT), r6 /* r6 = reply, no real fixup */
- or ZERO, ZERO, r7 /* r7 = data, clear top byte of data */
-
-___strncpy_from_user1:
- ld.b r3, 0, r7 /* Fault address: only in reading */
- st.b r2, 0, r7
- addi r2, 1, r2
- addi r3, 1, r3
- beq/u ZERO, r7, tr1
- addi r4, -1, r4 /* return real number of copied bytes */
- bne/l ZERO, r4, tr0
-
-___strncpy_from_user_done:
- sub r5, r4, r6 /* If done, return copied */
-
-___strncpy_from_user_exit:
- or r6, ZERO, r2
- ptabs LINK, tr0
- blink tr0, ZERO
-
-/*
- * extern long __strnlen_user(const char *__s, long __n)
- *
- * Inputs:
- * (r2) source address
- * (r3) source size in bytes
- *
- * Ouputs:
- * (r2) -EFAULT (in case of faulting)
- * string length (otherwise)
- */
- .global __strnlen_user
-__strnlen_user:
- pta ___strnlen_user_set_reply, tr0
- pta ___strnlen_user1, tr1
- or ZERO, ZERO, r5 /* r5 = counter */
- movi -(EFAULT), r6 /* r6 = reply, no real fixup */
- or ZERO, ZERO, r7 /* r7 = data, clear top byte of data */
- beq r3, ZERO, tr0
-
-___strnlen_user1:
- ldx.b r2, r5, r7 /* Fault address: only in reading */
- addi r3, -1, r3 /* No real fixup */
- addi r5, 1, r5
- beq r3, ZERO, tr0
- bne r7, ZERO, tr1
-! The line below used to be active. This meant led to a junk byte lying between each pair
-! of entries in the argv & envp structures in memory. Whilst the program saw the right data
-! via the argv and envp arguments to main, it meant the 'flat' representation visible through
-! /proc/$pid/cmdline was corrupt, causing trouble with ps, for example.
-! addi r5, 1, r5 /* Include '\0' */
-
-___strnlen_user_set_reply:
- or r5, ZERO, r6 /* If done, return counter */
-
-___strnlen_user_exit:
- or r6, ZERO, r2
- ptabs LINK, tr0
- blink tr0, ZERO
-
/*
* extern long __get_user_asm_?(void *val, long addr)
*
.long ___copy_user2, ___copy_user_exit
.long ___clear_user1, ___clear_user_exit
#endif
- .long ___strncpy_from_user1, ___strncpy_from_user_exit
- .long ___strnlen_user1, ___strnlen_user_exit
.long ___get_user_asm_b1, ___get_user_asm_b_exit
.long ___get_user_asm_w1, ___get_user_asm_w_exit
.long ___get_user_asm_l1, ___get_user_asm_l_exit
#include <linux/sched.h>
#include <linux/export.h>
#include <linux/stackprotector.h>
+#include <asm/fpu.h>
struct kmem_cache *task_xstate_cachep = NULL;
unsigned int xstate_size;
#include <asm/switch_to.h>
struct task_struct *last_task_used_math = NULL;
+struct pt_regs fake_swapper_regs = { 0, };
void show_regs(struct pt_regs *regs)
{
EXPORT_SYMBOL(__get_user_asm_w);
EXPORT_SYMBOL(__get_user_asm_l);
EXPORT_SYMBOL(__get_user_asm_q);
-EXPORT_SYMBOL(__strnlen_user);
-EXPORT_SYMBOL(__strncpy_from_user);
EXPORT_SYMBOL(__clear_user);
EXPORT_SYMBOL(copy_page);
EXPORT_SYMBOL(__copy_user);
+++ /dev/null
-#ifndef _SPARC64_CMT_H
-#define _SPARC64_CMT_H
-
-/* cmt.h: Chip Multi-Threading register definitions
- *
- * Copyright (C) 2004 David S. Miller (davem@redhat.com)
- */
-
-/* ASI_CORE_ID - private */
-#define LP_ID 0x0000000000000010UL
-#define LP_ID_MAX 0x00000000003f0000UL
-#define LP_ID_ID 0x000000000000003fUL
-
-/* ASI_INTR_ID - private */
-#define LP_INTR_ID 0x0000000000000000UL
-#define LP_INTR_ID_ID 0x00000000000003ffUL
-
-/* ASI_CESR_ID - private */
-#define CESR_ID 0x0000000000000040UL
-#define CESR_ID_ID 0x00000000000000ffUL
-
-/* ASI_CORE_AVAILABLE - shared */
-#define LP_AVAIL 0x0000000000000000UL
-#define LP_AVAIL_1 0x0000000000000002UL
-#define LP_AVAIL_0 0x0000000000000001UL
-
-/* ASI_CORE_ENABLE_STATUS - shared */
-#define LP_ENAB_STAT 0x0000000000000010UL
-#define LP_ENAB_STAT_1 0x0000000000000002UL
-#define LP_ENAB_STAT_0 0x0000000000000001UL
-
-/* ASI_CORE_ENABLE - shared */
-#define LP_ENAB 0x0000000000000020UL
-#define LP_ENAB_1 0x0000000000000002UL
-#define LP_ENAB_0 0x0000000000000001UL
-
-/* ASI_CORE_RUNNING - shared */
-#define LP_RUNNING_RW 0x0000000000000050UL
-#define LP_RUNNING_W1S 0x0000000000000060UL
-#define LP_RUNNING_W1C 0x0000000000000068UL
-#define LP_RUNNING_1 0x0000000000000002UL
-#define LP_RUNNING_0 0x0000000000000001UL
-
-/* ASI_CORE_RUNNING_STAT - shared */
-#define LP_RUN_STAT 0x0000000000000058UL
-#define LP_RUN_STAT_1 0x0000000000000002UL
-#define LP_RUN_STAT_0 0x0000000000000001UL
-
-/* ASI_XIR_STEERING - shared */
-#define LP_XIR_STEER 0x0000000000000030UL
-#define LP_XIR_STEER_1 0x0000000000000002UL
-#define LP_XIR_STEER_0 0x0000000000000001UL
-
-/* ASI_CMT_ERROR_STEERING - shared */
-#define CMT_ER_STEER 0x0000000000000040UL
-#define CMT_ER_STEER_1 0x0000000000000002UL
-#define CMT_ER_STEER_0 0x0000000000000001UL
-
-#endif /* _SPARC64_CMT_H */
+++ /dev/null
-/*
- * mpmbox.h: Interface and defines for the OpenProm mailbox
- * facilities for MP machines under Linux.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef _SPARC_MPMBOX_H
-#define _SPARC_MPMBOX_H
-
-/* The prom allocates, for each CPU on the machine an unsigned
- * byte in physical ram. You probe the device tree prom nodes
- * for these values. The purpose of this byte is to be able to
- * pass messages from one cpu to another.
- */
-
-/* These are the main message types we have to look for in our
- * Cpu mailboxes, based upon these values we decide what course
- * of action to take.
- */
-
-/* The CPU is executing code in the kernel. */
-#define MAILBOX_ISRUNNING 0xf0
-
-/* Another CPU called romvec->pv_exit(), you should call
- * prom_stopcpu() when you see this in your mailbox.
- */
-#define MAILBOX_EXIT 0xfb
-
-/* Another CPU called romvec->pv_enter(), you should call
- * prom_cpuidle() when this is seen.
- */
-#define MAILBOX_GOSPIN 0xfc
-
-/* Another CPU has hit a breakpoint either into kadb or the prom
- * itself. Just like MAILBOX_GOSPIN, you should call prom_cpuidle()
- * at this point.
- */
-#define MAILBOX_BPT_SPIN 0xfd
-
-/* Oh geese, some other nitwit got a damn watchdog reset. The party's
- * over so go call prom_stopcpu().
- */
-#define MAILBOX_WDOG_STOP 0xfe
-
-#ifndef __ASSEMBLY__
-
-/* Handy macro's to determine a cpu's state. */
-
-/* Is the cpu still in Power On Self Test? */
-#define MBOX_POST_P(letter) ((letter) >= 0x00 && (letter) <= 0x7f)
-
-/* Is the cpu at the 'ok' prompt of the PROM? */
-#define MBOX_PROMPROMPT_P(letter) ((letter) >= 0x80 && (letter) <= 0x8f)
-
-/* Is the cpu spinning in the PROM? */
-#define MBOX_PROMSPIN_P(letter) ((letter) >= 0x90 && (letter) <= 0xef)
-
-/* Sanity check... This is junk mail, throw it out. */
-#define MBOX_BOGON_P(letter) ((letter) >= 0xf1 && (letter) <= 0xfa)
-
-/* Is the cpu actively running an application/kernel-code? */
-#define MBOX_RUNNING_P(letter) ((letter) == MAILBOX_ISRUNNING)
-
-#endif /* !(__ASSEMBLY__) */
-
-#endif /* !(_SPARC_MPMBOX_H) */
root_vdev = vio_create_one(hp, root, NULL);
err = -ENODEV;
if (!root_vdev) {
- printk(KERN_ERR "VIO: Coult not create root device.\n");
+ printk(KERN_ERR "VIO: Could not create root device.\n");
goto out_release;
}
/* Enable interrupts racelessly and nap forever: helper for cpu_idle(). */
extern void _cpu_idle(void);
-/* Switch boot idle thread to a freshly-allocated stack and free old stack. */
-extern void cpu_idle_on_new_stack(struct thread_info *old_ti,
- unsigned long new_sp,
- unsigned long new_ss10);
-
#else /* __ASSEMBLY__ */
/*
#ifdef __tilegx__
#define __get_user_1(x, ptr, ret) __get_user_asm(ld1u, x, ptr, ret)
#define __get_user_2(x, ptr, ret) __get_user_asm(ld2u, x, ptr, ret)
-#define __get_user_4(x, ptr, ret) __get_user_asm(ld4u, x, ptr, ret)
+#define __get_user_4(x, ptr, ret) __get_user_asm(ld4s, x, ptr, ret)
#define __get_user_8(x, ptr, ret) __get_user_asm(ld, x, ptr, ret)
#else
#define __get_user_1(x, ptr, ret) __get_user_asm(lb_u, x, ptr, ret)
#include <linux/kernel.h>
#include <linux/string.h>
+#include <asm/byteorder.h>
#include <asm/backtrace.h>
#include <asm/tile-desc.h>
#include <arch/abi.h>
bytes_to_prefetch / sizeof(tile_bundle_bits);
}
- /* Decode the next bundle. */
- bundle.bits = prefetched_bundles[next_bundle++];
+ /*
+ * Decode the next bundle.
+ * TILE always stores instruction bundles in little-endian
+ * mode, even when the chip is running in big-endian mode.
+ */
+ bundle.bits = le64_to_cpu(prefetched_bundles[next_bundle++]);
bundle.num_insns =
parse_insn_tile(bundle.bits, pc, bundle.insns);
num_info_ops = bt_get_info_ops(&bundle, info_operands);
jrp lr /* keep backtracer happy */
STD_ENDPROC(KBacktraceIterator_init_current)
-/*
- * Reset our stack to r1/r2 (sp and ksp0+cpu respectively), then
- * free the old stack (passed in r0) and re-invoke cpu_idle().
- * We update sp and ksp0 simultaneously to avoid backtracer warnings.
- */
-STD_ENTRY(cpu_idle_on_new_stack)
- {
- move sp, r1
- mtspr SPR_SYSTEM_SAVE_K_0, r2
- }
- jal free_thread_info
- j cpu_idle
- STD_ENDPROC(cpu_idle_on_new_stack)
-
/* Loop forever on a nap during SMP boot. */
STD_ENTRY(smp_nap)
nap
#include <linux/smp.h>
#include <linux/timex.h>
#include <linux/hugetlb.h>
+#include <linux/start_kernel.h>
#include <asm/setup.h>
#include <asm/sections.h>
#include <asm/cacheflush.h>
struct task_struct *from = current, *to = arg;
to->thread.saved_task = from;
- rcu_switch_from(from);
switch_to(from, to, from);
}
.section ".bsdata", "a"
bugger_off_msg:
- .ascii "Direct booting from floppy is no longer supported.\r\n"
- .ascii "Please use a boot loader program instead.\r\n"
+ .ascii "Direct floppy boot is not supported. "
+ .ascii "Use a boot loader program instead.\r\n"
.ascii "\n"
- .ascii "Remove disk and press any key to reboot . . .\r\n"
+ .ascii "Remove disk and press any key to reboot ...\r\n"
.byte 0
#ifdef CONFIG_EFI_STUB
#else
.word 0x8664 # x86-64
#endif
- .word 2 # nr_sections
+ .word 3 # nr_sections
.long 0 # TimeDateStamp
.long 0 # PointerToSymbolTable
.long 1 # NumberOfSymbols
#else
.quad 0 # ImageBase
#endif
- .long 0x1000 # SectionAlignment
- .long 0x200 # FileAlignment
+ .long 0x20 # SectionAlignment
+ .long 0x20 # FileAlignment
.word 0 # MajorOperatingSystemVersion
.word 0 # MinorOperatingSystemVersion
.word 0 # MajorImageVersion
# Section table
section_table:
- .ascii ".text"
- .byte 0
+ #
+ # The offset & size fields are filled in by build.c.
+ #
+ .ascii ".setup"
.byte 0
.byte 0
.long 0
#
# The EFI application loader requires a relocation section
- # because EFI applications must be relocatable. But since
- # we don't need the loader to fixup any relocs for us, we
- # just create an empty (zero-length) .reloc section header.
+ # because EFI applications must be relocatable. The .reloc
+ # offset & size fields are filled in by build.c.
#
.ascii ".reloc"
.byte 0
.word 0 # NumberOfRelocations
.word 0 # NumberOfLineNumbers
.long 0x42100040 # Characteristics (section flags)
+
+ #
+ # The offset & size fields are filled in by build.c.
+ #
+ .ascii ".text"
+ .byte 0
+ .byte 0
+ .byte 0
+ .long 0
+ .long 0x0 # startup_{32,64}
+ .long 0 # Size of initialized data
+ # on disk
+ .long 0x0 # startup_{32,64}
+ .long 0 # PointerToRelocations
+ .long 0 # PointerToLineNumbers
+ .word 0 # NumberOfRelocations
+ .word 0 # NumberOfLineNumbers
+ .long 0x60500020 # Characteristics (section flags)
+
#endif /* CONFIG_EFI_STUB */
# Kernel attributes; used by setup. This is part 1 of the
u8 buf[SETUP_SECT_MAX*512];
int is_big_kernel;
+#define PECOFF_RELOC_RESERVE 0x20
+
/*----------------------------------------------------------------------*/
static const u32 crctab32[] = {
die("Usage: build setup system [> image]");
}
-int main(int argc, char ** argv)
-{
#ifdef CONFIG_EFI_STUB
- unsigned int file_sz, pe_header;
+
+static void update_pecoff_section_header(char *section_name, u32 offset, u32 size)
+{
+ unsigned int pe_header;
+ unsigned short num_sections;
+ u8 *section;
+
+ pe_header = get_unaligned_le32(&buf[0x3c]);
+ num_sections = get_unaligned_le16(&buf[pe_header + 6]);
+
+#ifdef CONFIG_X86_32
+ section = &buf[pe_header + 0xa8];
+#else
+ section = &buf[pe_header + 0xb8];
#endif
+
+ while (num_sections > 0) {
+ if (strncmp((char*)section, section_name, 8) == 0) {
+ /* section header size field */
+ put_unaligned_le32(size, section + 0x8);
+
+ /* section header vma field */
+ put_unaligned_le32(offset, section + 0xc);
+
+ /* section header 'size of initialised data' field */
+ put_unaligned_le32(size, section + 0x10);
+
+ /* section header 'file offset' field */
+ put_unaligned_le32(offset, section + 0x14);
+
+ break;
+ }
+ section += 0x28;
+ num_sections--;
+ }
+}
+
+static void update_pecoff_setup_and_reloc(unsigned int size)
+{
+ u32 setup_offset = 0x200;
+ u32 reloc_offset = size - PECOFF_RELOC_RESERVE;
+ u32 setup_size = reloc_offset - setup_offset;
+
+ update_pecoff_section_header(".setup", setup_offset, setup_size);
+ update_pecoff_section_header(".reloc", reloc_offset, PECOFF_RELOC_RESERVE);
+
+ /*
+ * Modify .reloc section contents with a single entry. The
+ * relocation is applied to offset 10 of the relocation section.
+ */
+ put_unaligned_le32(reloc_offset + 10, &buf[reloc_offset]);
+ put_unaligned_le32(10, &buf[reloc_offset + 4]);
+}
+
+static void update_pecoff_text(unsigned int text_start, unsigned int file_sz)
+{
+ unsigned int pe_header;
+ unsigned int text_sz = file_sz - text_start;
+
+ pe_header = get_unaligned_le32(&buf[0x3c]);
+
+ /* Size of image */
+ put_unaligned_le32(file_sz, &buf[pe_header + 0x50]);
+
+ /*
+ * Size of code: Subtract the size of the first sector (512 bytes)
+ * which includes the header.
+ */
+ put_unaligned_le32(file_sz - 512, &buf[pe_header + 0x1c]);
+
+#ifdef CONFIG_X86_32
+ /*
+ * Address of entry point.
+ *
+ * The EFI stub entry point is +16 bytes from the start of
+ * the .text section.
+ */
+ put_unaligned_le32(text_start + 16, &buf[pe_header + 0x28]);
+#else
+ /*
+ * Address of entry point. startup_32 is at the beginning and
+ * the 64-bit entry point (startup_64) is always 512 bytes
+ * after. The EFI stub entry point is 16 bytes after that, as
+ * the first instruction allows legacy loaders to jump over
+ * the EFI stub initialisation
+ */
+ put_unaligned_le32(text_start + 528, &buf[pe_header + 0x28]);
+#endif /* CONFIG_X86_32 */
+
+ update_pecoff_section_header(".text", text_start, text_sz);
+}
+
+#endif /* CONFIG_EFI_STUB */
+
+int main(int argc, char ** argv)
+{
unsigned int i, sz, setup_sectors;
int c;
u32 sys_size;
die("Boot block hasn't got boot flag (0xAA55)");
fclose(file);
+#ifdef CONFIG_EFI_STUB
+ /* Reserve 0x20 bytes for .reloc section */
+ memset(buf+c, 0, PECOFF_RELOC_RESERVE);
+ c += PECOFF_RELOC_RESERVE;
+#endif
+
/* Pad unused space with zeros */
setup_sectors = (c + 511) / 512;
if (setup_sectors < SETUP_SECT_MIN)
i = setup_sectors*512;
memset(buf+c, 0, i-c);
+#ifdef CONFIG_EFI_STUB
+ update_pecoff_setup_and_reloc(i);
+#endif
+
/* Set the default root device */
put_unaligned_le16(DEFAULT_ROOT_DEV, &buf[508]);
put_unaligned_le32(sys_size, &buf[0x1f4]);
#ifdef CONFIG_EFI_STUB
- file_sz = sz + i + ((sys_size * 16) - sz);
-
- pe_header = get_unaligned_le32(&buf[0x3c]);
-
- /* Size of image */
- put_unaligned_le32(file_sz, &buf[pe_header + 0x50]);
-
- /*
- * Subtract the size of the first section (512 bytes) which
- * includes the header and .reloc section. The remaining size
- * is that of the .text section.
- */
- file_sz -= 512;
-
- /* Size of code */
- put_unaligned_le32(file_sz, &buf[pe_header + 0x1c]);
-
-#ifdef CONFIG_X86_32
- /*
- * Address of entry point.
- *
- * The EFI stub entry point is +16 bytes from the start of
- * the .text section.
- */
- put_unaligned_le32(i + 16, &buf[pe_header + 0x28]);
-
- /* .text size */
- put_unaligned_le32(file_sz, &buf[pe_header + 0xb0]);
-
- /* .text vma */
- put_unaligned_le32(0x200, &buf[pe_header + 0xb4]);
-
- /* .text size of initialised data */
- put_unaligned_le32(file_sz, &buf[pe_header + 0xb8]);
-
- /* .text file offset */
- put_unaligned_le32(0x200, &buf[pe_header + 0xbc]);
-#else
- /*
- * Address of entry point. startup_32 is at the beginning and
- * the 64-bit entry point (startup_64) is always 512 bytes
- * after. The EFI stub entry point is 16 bytes after that, as
- * the first instruction allows legacy loaders to jump over
- * the EFI stub initialisation
- */
- put_unaligned_le32(i + 528, &buf[pe_header + 0x28]);
-
- /* .text size */
- put_unaligned_le32(file_sz, &buf[pe_header + 0xc0]);
-
- /* .text vma */
- put_unaligned_le32(0x200, &buf[pe_header + 0xc4]);
-
- /* .text size of initialised data */
- put_unaligned_le32(file_sz, &buf[pe_header + 0xc8]);
-
- /* .text file offset */
- put_unaligned_le32(0x200, &buf[pe_header + 0xcc]);
-#endif /* CONFIG_X86_32 */
-#endif /* CONFIG_EFI_STUB */
+ update_pecoff_text(setup_sectors * 512, sz + i + ((sys_size * 16) - sz));
+#endif
crc = partial_crc32(buf, i, crc);
if (fwrite(buf, 1, i, stdout) != i)
pxor IN3, STATE4
movaps IN4, IV
#else
- pxor (INP), STATE2
- pxor 0x10(INP), STATE3
pxor IN1, STATE4
movaps IN2, IV
+ movups (INP), IN1
+ pxor IN1, STATE2
+ movups 0x10(INP), IN2
+ pxor IN2, STATE3
#endif
movups STATE1, (OUTP)
movups STATE2, 0x10(OUTP)
int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from)
{
int err = 0;
- bool ia32 = is_ia32_task();
+ bool ia32 = test_thread_flag(TIF_IA32);
if (!access_ok(VERIFY_WRITE, to, sizeof(compat_siginfo_t)))
return -EFAULT;
#define X86_FEATURE_XSAVEOPT (7*32+ 4) /* Optimized Xsave */
#define X86_FEATURE_PLN (7*32+ 5) /* Intel Power Limit Notification */
#define X86_FEATURE_PTS (7*32+ 6) /* Intel Package Thermal Status */
-#define X86_FEATURE_DTS (7*32+ 7) /* Digital Thermal Sensor */
+#define X86_FEATURE_DTHERM (7*32+ 7) /* Digital Thermal Sensor */
#define X86_FEATURE_HW_PSTATE (7*32+ 8) /* AMD HW-PState */
/* Virtualization flags: Linux defined, word 8 */
__register_nmi_handler((t), &fn##_na); \
})
+/*
+ * For special handlers that register/unregister in the
+ * init section only. This should be considered rare.
+ */
+#define register_nmi_handler_initonly(t, fn, fg, n) \
+({ \
+ static struct nmiaction fn##_na __initdata = { \
+ .handler = (fn), \
+ .name = (n), \
+ .flags = (fg), \
+ }; \
+ __register_nmi_handler((t), &fn##_na); \
+})
+
int __register_nmi_handler(unsigned int, struct nmiaction *);
void unregister_nmi_handler(unsigned int, const char *);
* they can run pmd_offset_map_lock or pmd_trans_huge or other pmd
* operations.
*
- * Without THP if the mmap_sem is hold for reading, the
- * pmd can only transition from null to not null while pmd_read_atomic runs.
- * So there's no need of literally reading it atomically.
+ * Without THP if the mmap_sem is hold for reading, the pmd can only
+ * transition from null to not null while pmd_read_atomic runs. So
+ * we can always return atomic pmd values with this function.
*
* With THP if the mmap_sem is hold for reading, the pmd can become
- * THP or null or point to a pte (and in turn become "stable") at any
- * time under pmd_read_atomic, so it's mandatory to read it atomically
- * with cmpxchg8b.
+ * trans_huge or none or point to a pte (and in turn become "stable")
+ * at any time under pmd_read_atomic. We could read it really
+ * atomically here with a atomic64_read for the THP enabled case (and
+ * it would be a whole lot simpler), but to avoid using cmpxchg8b we
+ * only return an atomic pmdval if the low part of the pmdval is later
+ * found stable (i.e. pointing to a pte). And we're returning a none
+ * pmdval if the low part of the pmd is none. In some cases the high
+ * and low part of the pmdval returned may not be consistent if THP is
+ * enabled (the low part may point to previously mapped hugepage,
+ * while the high part may point to a more recently mapped hugepage),
+ * but pmd_none_or_trans_huge_or_clear_bad() only needs the low part
+ * of the pmd to be read atomically to decide if the pmd is unstable
+ * or not, with the only exception of when the low part of the pmd is
+ * zero in which case we return a none pmd.
*/
-#ifndef CONFIG_TRANSPARENT_HUGEPAGE
static inline pmd_t pmd_read_atomic(pmd_t *pmdp)
{
pmdval_t ret;
return (pmd_t) { ret };
}
-#else /* CONFIG_TRANSPARENT_HUGEPAGE */
-static inline pmd_t pmd_read_atomic(pmd_t *pmdp)
-{
- return (pmd_t) { atomic64_read((atomic64_t *)pmdp) };
-}
-#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
static inline void native_set_pte_atomic(pte_t *ptep, pte_t pte)
{
#define segment_eq(a, b) ((a).seg == (b).seg)
#define user_addr_max() (current_thread_info()->addr_limit.seg)
-#define __addr_ok(addr) \
- ((unsigned long __force)(addr) < \
- (current_thread_info()->addr_limit.seg))
+#define __addr_ok(addr) \
+ ((unsigned long __force)(addr) < user_addr_max())
/*
* Test whether a block of memory is a valid user space address.
* This needs 33-bit (65-bit for x86_64) arithmetic. We have a carry...
*/
-#define __range_not_ok(addr, size) \
+#define __range_not_ok(addr, size, limit) \
({ \
unsigned long flag, roksum; \
__chk_user_ptr(addr); \
asm("add %3,%1 ; sbb %0,%0 ; cmp %1,%4 ; sbb $0,%0" \
: "=&r" (flag), "=r" (roksum) \
: "1" (addr), "g" ((long)(size)), \
- "rm" (current_thread_info()->addr_limit.seg)); \
+ "rm" (limit)); \
flag; \
})
* checks that the pointer is in the user space range - after calling
* this function, memory access functions may still return -EFAULT.
*/
-#define access_ok(type, addr, size) (likely(__range_not_ok(addr, size) == 0))
+#define access_ok(type, addr, size) \
+ (likely(__range_not_ok(addr, size, user_addr_max()) == 0))
/*
* The exception table consists of pairs of addresses relative to the
/* 4 bits of software ack period */
#define UV2_ACK_MASK 0x7UL
#define UV2_ACK_UNITS_SHFT 3
-#define UV2_LEG_SHFT UV2H_LB_BAU_MISC_CONTROL_USE_LEGACY_DESCRIPTOR_FORMATS_SHFT
#define UV2_EXT_SHFT UV2H_LB_BAU_MISC_CONTROL_ENABLE_EXTENDED_SB_STATUS_SHFT
/*
return 0;
}
- if (intsrc->source_irq == 0 && intsrc->global_irq == 2) {
+ if (intsrc->source_irq == 0) {
if (acpi_skip_timer_override) {
- printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n");
+ printk(PREFIX "BIOS IRQ0 override ignored.\n");
return 0;
}
- if (acpi_fix_pin2_polarity && (intsrc->inti_flags & ACPI_MADT_POLARITY_MASK)) {
+
+ if ((intsrc->global_irq == 2) && acpi_fix_pin2_polarity
+ && (intsrc->inti_flags & ACPI_MADT_POLARITY_MASK)) {
intsrc->inti_flags &= ~ACPI_MADT_POLARITY_MASK;
printk(PREFIX "BIOS IRQ0 pin2 override: forcing polarity to high active.\n");
}
}
/*
- * Force ignoring BIOS IRQ0 pin2 override
+ * Force ignoring BIOS IRQ0 override
*/
static int __init dmi_ignore_irq0_timer_override(const struct dmi_system_id *d)
{
- /*
- * The ati_ixp4x0_rev() early PCI quirk should have set
- * the acpi_skip_timer_override flag already:
- */
if (!acpi_skip_timer_override) {
- WARN(1, KERN_ERR "ati_ixp4x0 quirk not complete.\n");
- pr_notice("%s detected: Ignoring BIOS IRQ0 pin2 override\n",
+ pr_notice("%s detected: Ignoring BIOS IRQ0 override\n",
d->ident);
acpi_skip_timer_override = 1;
}
* is enabled. This input is incorrectly designated the
* ISA IRQ 0 via an interrupt source override even though
* it is wired to the output of the master 8259A and INTIN0
- * is not connected at all. Force ignoring BIOS IRQ0 pin2
+ * is not connected at all. Force ignoring BIOS IRQ0
* override in that cases.
*/
{
DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6715b"),
},
},
+ {
+ .callback = dmi_ignore_irq0_timer_override,
+ .ident = "FUJITSU SIEMENS",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "AMILO PRO V2030"),
+ },
+ },
{}
};
#include <linux/bitops.h>
#include <linux/ioport.h>
#include <linux/suspend.h>
-#include <linux/kmemleak.h>
#include <asm/e820.h>
#include <asm/io.h>
#include <asm/iommu.h>
return 0;
}
memblock_reserve(addr, aper_size);
- /*
- * Kmemleak should not scan this block as it may not be mapped via the
- * kernel direct mapping.
- */
- kmemleak_ignore(phys_to_virt(addr));
printk(KERN_INFO "Mapping aperture over %d KB of RAM @ %lx\n",
aper_size >> 10, addr);
insert_aperture_resource((u32)addr, aper_size);
BUG_ON(!cfg->vector);
vector = cfg->vector;
- for_each_cpu_and(cpu, cfg->domain, cpu_online_mask)
+ for_each_cpu(cpu, cfg->domain)
per_cpu(vector_irq, cpu)[vector] = -1;
cfg->vector = 0;
if (likely(!cfg->move_in_progress))
return;
- for_each_cpu_and(cpu, cfg->old_domain, cpu_online_mask) {
+ for_each_cpu(cpu, cfg->old_domain) {
for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS;
vector++) {
if (per_cpu(vector_irq, cpu)[vector] != irq)
*/
iv = __this_cpu_read(mce_next_interval);
if (mce_notify_irq())
- iv = max(iv, (unsigned long) HZ/100);
+ iv = max(iv / 2, (unsigned long) HZ/100);
else
iv = min(iv * 2, round_jiffies_relative(check_interval * HZ));
__this_cpu_write(mce_next_interval, iv);
static void __mcheck_cpu_init_timer(void)
{
struct timer_list *t = &__get_cpu_var(mce_timer);
- unsigned long iv = __this_cpu_read(mce_next_interval);
+ unsigned long iv = check_interval * HZ;
setup_timer(t, mce_timer_fn, smp_processor_id());
-#!/usr/bin/perl
+#!/usr/bin/perl -w
#
# Generate the x86_cap_flags[] array from include/asm-x86/cpufeature.h
#
print OUT "#include <asm/cpufeature.h>\n\n";
print OUT "const char * const x86_cap_flags[NCAPINTS*32] = {\n";
+%features = ();
+$err = 0;
+
while (defined($line = <IN>)) {
if ($line =~ /^\s*\#\s*define\s+(X86_FEATURE_(\S+))\s+(.*)$/) {
$macro = $1;
- $feature = $2;
+ $feature = "\L$2";
$tail = $3;
if ($tail =~ /\/\*\s*\"([^"]*)\".*\*\//) {
- $feature = $1;
+ $feature = "\L$1";
}
- if ($feature ne '') {
- printf OUT "\t%-32s = \"%s\",\n",
- "[$macro]", "\L$feature";
+ next if ($feature eq '');
+
+ if ($features{$feature}++) {
+ print STDERR "$in: duplicate feature name: $feature\n";
+ $err++;
}
+ printf OUT "\t%-32s = \"%s\",\n", "[$macro]", $feature;
}
}
print OUT "};\n";
close(IN);
close(OUT);
+
+if ($err) {
+ unlink($out);
+ exit(1);
+}
+
+exit(0);
if (!cpuc->shared_regs)
goto error;
}
+ cpuc->is_fake = 1;
return cpuc;
error:
free_fake_cpuc(cpuc);
dump_trace(NULL, regs, NULL, 0, &backtrace_ops, entry);
}
+static inline int
+valid_user_frame(const void __user *fp, unsigned long size)
+{
+ return (__range_not_ok(fp, size, TASK_SIZE) == 0);
+}
+
#ifdef CONFIG_COMPAT
#include <asm/compat.h>
if (bytes != sizeof(frame))
break;
- if (fp < compat_ptr(regs->sp))
+ if (!valid_user_frame(fp, sizeof(frame)))
break;
perf_callchain_store(entry, frame.return_address);
if (bytes != sizeof(frame))
break;
- if ((unsigned long)fp < regs->sp)
+ if (!valid_user_frame(fp, sizeof(frame)))
break;
perf_callchain_store(entry, frame.return_address);
struct perf_event *event_list[X86_PMC_IDX_MAX]; /* in enabled order */
unsigned int group_flag;
+ int is_fake;
/*
* Intel DebugStore bits
int pebs_record_size;
void (*drain_pebs)(struct pt_regs *regs);
struct event_constraint *pebs_constraints;
+ void (*pebs_aliases)(struct perf_event *event);
/*
* Intel LBR
return NULL;
}
-static bool intel_try_alt_er(struct perf_event *event, int orig_idx)
+static int intel_alt_er(int idx)
{
if (!(x86_pmu.er_flags & ERF_HAS_RSP_1))
- return false;
+ return idx;
- if (event->hw.extra_reg.idx == EXTRA_REG_RSP_0) {
- event->hw.config &= ~INTEL_ARCH_EVENT_MASK;
- event->hw.config |= 0x01bb;
- event->hw.extra_reg.idx = EXTRA_REG_RSP_1;
- event->hw.extra_reg.reg = MSR_OFFCORE_RSP_1;
- } else if (event->hw.extra_reg.idx == EXTRA_REG_RSP_1) {
+ if (idx == EXTRA_REG_RSP_0)
+ return EXTRA_REG_RSP_1;
+
+ if (idx == EXTRA_REG_RSP_1)
+ return EXTRA_REG_RSP_0;
+
+ return idx;
+}
+
+static void intel_fixup_er(struct perf_event *event, int idx)
+{
+ event->hw.extra_reg.idx = idx;
+
+ if (idx == EXTRA_REG_RSP_0) {
event->hw.config &= ~INTEL_ARCH_EVENT_MASK;
event->hw.config |= 0x01b7;
- event->hw.extra_reg.idx = EXTRA_REG_RSP_0;
event->hw.extra_reg.reg = MSR_OFFCORE_RSP_0;
+ } else if (idx == EXTRA_REG_RSP_1) {
+ event->hw.config &= ~INTEL_ARCH_EVENT_MASK;
+ event->hw.config |= 0x01bb;
+ event->hw.extra_reg.reg = MSR_OFFCORE_RSP_1;
}
-
- if (event->hw.extra_reg.idx == orig_idx)
- return false;
-
- return true;
}
/*
struct event_constraint *c = &emptyconstraint;
struct er_account *era;
unsigned long flags;
- int orig_idx = reg->idx;
+ int idx = reg->idx;
- /* already allocated shared msr */
- if (reg->alloc)
+ /*
+ * reg->alloc can be set due to existing state, so for fake cpuc we
+ * need to ignore this, otherwise we might fail to allocate proper fake
+ * state for this extra reg constraint. Also see the comment below.
+ */
+ if (reg->alloc && !cpuc->is_fake)
return NULL; /* call x86_get_event_constraint() */
again:
- era = &cpuc->shared_regs->regs[reg->idx];
+ era = &cpuc->shared_regs->regs[idx];
/*
* we use spin_lock_irqsave() to avoid lockdep issues when
* passing a fake cpuc
if (!atomic_read(&era->ref) || era->config == reg->config) {
+ /*
+ * If its a fake cpuc -- as per validate_{group,event}() we
+ * shouldn't touch event state and we can avoid doing so
+ * since both will only call get_event_constraints() once
+ * on each event, this avoids the need for reg->alloc.
+ *
+ * Not doing the ER fixup will only result in era->reg being
+ * wrong, but since we won't actually try and program hardware
+ * this isn't a problem either.
+ */
+ if (!cpuc->is_fake) {
+ if (idx != reg->idx)
+ intel_fixup_er(event, idx);
+
+ /*
+ * x86_schedule_events() can call get_event_constraints()
+ * multiple times on events in the case of incremental
+ * scheduling(). reg->alloc ensures we only do the ER
+ * allocation once.
+ */
+ reg->alloc = 1;
+ }
+
/* lock in msr value */
era->config = reg->config;
era->reg = reg->reg;
/* one more user */
atomic_inc(&era->ref);
- /* no need to reallocate during incremental event scheduling */
- reg->alloc = 1;
-
/*
* need to call x86_get_event_constraint()
* to check if associated event has constraints
*/
c = NULL;
- } else if (intel_try_alt_er(event, orig_idx)) {
- raw_spin_unlock_irqrestore(&era->lock, flags);
- goto again;
+ } else {
+ idx = intel_alt_er(idx);
+ if (idx != reg->idx) {
+ raw_spin_unlock_irqrestore(&era->lock, flags);
+ goto again;
+ }
}
raw_spin_unlock_irqrestore(&era->lock, flags);
struct er_account *era;
/*
- * only put constraint if extra reg was actually
- * allocated. Also takes care of event which do
- * not use an extra shared reg
+ * Only put constraint if extra reg was actually allocated. Also takes
+ * care of event which do not use an extra shared reg.
+ *
+ * Also, if this is a fake cpuc we shouldn't touch any event state
+ * (reg->alloc) and we don't care about leaving inconsistent cpuc state
+ * either since it'll be thrown out.
*/
- if (!reg->alloc)
+ if (!reg->alloc || cpuc->is_fake)
return;
era = &cpuc->shared_regs->regs[reg->idx];
intel_put_shared_regs_event_constraints(cpuc, event);
}
-static int intel_pmu_hw_config(struct perf_event *event)
+static void intel_pebs_aliases_core2(struct perf_event *event)
{
- int ret = x86_pmu_hw_config(event);
-
- if (ret)
- return ret;
-
- if (event->attr.precise_ip &&
- (event->hw.config & X86_RAW_EVENT_MASK) == 0x003c) {
+ if ((event->hw.config & X86_RAW_EVENT_MASK) == 0x003c) {
/*
* Use an alternative encoding for CPU_CLK_UNHALTED.THREAD_P
* (0x003c) so that we can use it with PEBS.
*/
u64 alt_config = X86_CONFIG(.event=0xc0, .inv=1, .cmask=16);
+ alt_config |= (event->hw.config & ~X86_RAW_EVENT_MASK);
+ event->hw.config = alt_config;
+ }
+}
+
+static void intel_pebs_aliases_snb(struct perf_event *event)
+{
+ if ((event->hw.config & X86_RAW_EVENT_MASK) == 0x003c) {
+ /*
+ * Use an alternative encoding for CPU_CLK_UNHALTED.THREAD_P
+ * (0x003c) so that we can use it with PEBS.
+ *
+ * The regular CPU_CLK_UNHALTED.THREAD_P event (0x003c) isn't
+ * PEBS capable. However we can use UOPS_RETIRED.ALL
+ * (0x01c2), which is a PEBS capable event, to get the same
+ * count.
+ *
+ * UOPS_RETIRED.ALL counts the number of cycles that retires
+ * CNTMASK micro-ops. By setting CNTMASK to a value (16)
+ * larger than the maximum number of micro-ops that can be
+ * retired per cycle (4) and then inverting the condition, we
+ * count all cycles that retire 16 or less micro-ops, which
+ * is every cycle.
+ *
+ * Thereby we gain a PEBS capable cycle counter.
+ */
+ u64 alt_config = X86_CONFIG(.event=0xc2, .umask=0x01, .inv=1, .cmask=16);
alt_config |= (event->hw.config & ~X86_RAW_EVENT_MASK);
event->hw.config = alt_config;
}
+}
+
+static int intel_pmu_hw_config(struct perf_event *event)
+{
+ int ret = x86_pmu_hw_config(event);
+
+ if (ret)
+ return ret;
+
+ if (event->attr.precise_ip && x86_pmu.pebs_aliases)
+ x86_pmu.pebs_aliases(event);
if (intel_pmu_needs_lbr_smpl(event)) {
ret = intel_pmu_setup_lbr_filter(event);
.max_period = (1ULL << 31) - 1,
.get_event_constraints = intel_get_event_constraints,
.put_event_constraints = intel_put_event_constraints,
+ .pebs_aliases = intel_pebs_aliases_core2,
.format_attrs = intel_arch3_formats_attr,
break;
case 42: /* SandyBridge */
- x86_add_quirk(intel_sandybridge_quirk);
case 45: /* SandyBridge, "Romely-EP" */
+ x86_add_quirk(intel_sandybridge_quirk);
+ case 58: /* IvyBridge */
memcpy(hw_cache_event_ids, snb_hw_cache_event_ids,
sizeof(hw_cache_event_ids));
x86_pmu.event_constraints = intel_snb_event_constraints;
x86_pmu.pebs_constraints = intel_snb_pebs_event_constraints;
+ x86_pmu.pebs_aliases = intel_pebs_aliases_snb;
x86_pmu.extra_regs = intel_snb_extra_regs;
/* all extra regs are per-cpu when HT is on */
x86_pmu.er_flags |= ERF_HAS_RSP_1;
INTEL_EVENT_CONSTRAINT(0xc4, 0xf), /* BR_INST_RETIRED.* */
INTEL_EVENT_CONSTRAINT(0xc5, 0xf), /* BR_MISP_RETIRED.* */
INTEL_EVENT_CONSTRAINT(0xcd, 0x8), /* MEM_TRANS_RETIRED.* */
- INTEL_UEVENT_CONSTRAINT(0x11d0, 0xf), /* MEM_UOP_RETIRED.STLB_MISS_LOADS */
- INTEL_UEVENT_CONSTRAINT(0x12d0, 0xf), /* MEM_UOP_RETIRED.STLB_MISS_STORES */
- INTEL_UEVENT_CONSTRAINT(0x21d0, 0xf), /* MEM_UOP_RETIRED.LOCK_LOADS */
- INTEL_UEVENT_CONSTRAINT(0x22d0, 0xf), /* MEM_UOP_RETIRED.LOCK_STORES */
- INTEL_UEVENT_CONSTRAINT(0x41d0, 0xf), /* MEM_UOP_RETIRED.SPLIT_LOADS */
- INTEL_UEVENT_CONSTRAINT(0x42d0, 0xf), /* MEM_UOP_RETIRED.SPLIT_STORES */
- INTEL_UEVENT_CONSTRAINT(0x81d0, 0xf), /* MEM_UOP_RETIRED.ANY_LOADS */
- INTEL_UEVENT_CONSTRAINT(0x82d0, 0xf), /* MEM_UOP_RETIRED.ANY_STORES */
+ INTEL_EVENT_CONSTRAINT(0xd0, 0xf), /* MEM_UOP_RETIRED.* */
INTEL_EVENT_CONSTRAINT(0xd1, 0xf), /* MEM_LOAD_UOPS_RETIRED.* */
INTEL_EVENT_CONSTRAINT(0xd2, 0xf), /* MEM_LOAD_UOPS_LLC_HIT_RETIRED.* */
INTEL_UEVENT_CONSTRAINT(0x02d4, 0xf), /* MEM_LOAD_UOPS_MISC_RETIRED.LLC_MISS */
const struct cpuid_bit *cb;
static const struct cpuid_bit __cpuinitconst cpuid_bits[] = {
- { X86_FEATURE_DTS, CR_EAX, 0, 0x00000006, 0 },
+ { X86_FEATURE_DTHERM, CR_EAX, 0, 0x00000006, 0 },
{ X86_FEATURE_IDA, CR_EAX, 1, 0x00000006, 0 },
{ X86_FEATURE_ARAT, CR_EAX, 2, 0x00000006, 0 },
{ X86_FEATURE_PLN, CR_EAX, 4, 0x00000006, 0 },
/**
* kgdb_arch_handle_exception - Handle architecture specific GDB packets.
- * @vector: The error vector of the exception that happened.
+ * @e_vector: The error vector of the exception that happened.
* @signo: The signal number of the exception that happened.
* @err_code: The error code of the exception that happened.
- * @remcom_in_buffer: The buffer of the packet we have read.
- * @remcom_out_buffer: The buffer of %BUFMAX bytes to write a packet into.
- * @regs: The &struct pt_regs of the current process.
+ * @remcomInBuffer: The buffer of the packet we have read.
+ * @remcomOutBuffer: The buffer of %BUFMAX bytes to write a packet into.
+ * @linux_regs: The &struct pt_regs of the current process.
*
* This function MUST handle the 'c' and 's' command packets,
* as well packets to set / remove a hardware breakpoint, if used.
bool ret = false;
struct pvclock_vcpu_time_info *src;
- /*
- * per_cpu() is safe here because this function is only called from
- * timer functions where preemption is already disabled.
- */
- WARN_ON(!in_atomic());
src = &__get_cpu_var(hv_clock);
if ((src->flags & PVCLOCK_GUEST_STOPPED) != 0) {
__this_cpu_and(hv_clock.flags, ~PVCLOCK_GUEST_STOPPED);
static void __init init_nmi_testsuite(void)
{
/* trap all the unknown NMIs we may generate */
- register_nmi_handler(NMI_UNKNOWN, nmi_unk_cb, 0, "nmi_selftest_unk");
+ register_nmi_handler_initonly(NMI_UNKNOWN, nmi_unk_cb, 0, "nmi_selftest_unk");
}
static void __init cleanup_nmi_testsuite(void)
{
unsigned long timeout;
- if (register_nmi_handler(NMI_LOCAL, test_nmi_ipi_callback,
+ if (register_nmi_handler_initonly(NMI_LOCAL, test_nmi_ipi_callback,
NMI_FLAG_FIRST, "nmi_selftest")) {
nmi_fail = FAILURE;
return;
struct dma_attrs *attrs)
{
unsigned long dma_mask;
- struct page *page = NULL;
+ struct page *page;
unsigned int count = PAGE_ALIGN(size) >> PAGE_SHIFT;
dma_addr_t addr;
flag |= __GFP_ZERO;
again:
+ page = NULL;
if (!(flag & GFP_ATOMIC))
page = dma_alloc_from_contiguous(dev, count, get_order(size));
if (!page)
DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 990"),
},
},
+ { /* Handle problems with rebooting on the Precision M6600. */
+ .callback = set_pci_reboot,
+ .ident = "Dell OptiPlex 990",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Precision M6600"),
+ },
+ },
{ }
};
set_cpus_allowed_ptr(current, cpumask_of(reboot_cpu_id));
/*
- * O.K Now that I'm on the appropriate processor,
- * stop all of the others.
+ * O.K Now that I'm on the appropriate processor, stop all of the
+ * others. Also disable the local irq to not receive the per-cpu
+ * timer interrupt which may trigger scheduler's load balance.
*/
+ local_irq_disable();
stop_other_cpus();
#endif
static bool __cpuinit match_mc(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o)
{
- if (c->phys_proc_id == o->phys_proc_id)
- return topology_sane(c, o, "mc");
+ if (c->phys_proc_id == o->phys_proc_id) {
+ if (cpu_has(c, X86_FEATURE_AMD_DCM))
+ return true;
+ return topology_sane(c, o, "mc");
+ }
return false;
}
if ((i == cpu) || (has_mc && match_llc(c, o)))
link_mask(llc_shared, cpu, i);
+ }
+
+ /*
+ * This needs a separate iteration over the cpus because we rely on all
+ * cpu_sibling_mask links to be set-up.
+ */
+ for_each_cpu(i, cpu_sibling_setup_mask) {
+ o = &cpu_data(i);
+
if ((i == cpu) || (has_mc && match_mc(c, o))) {
link_mask(core, cpu, i);
/* maps the cpu to the sched domain representing multi-core */
const struct cpumask *cpu_coregroup_mask(int cpu)
{
- struct cpuinfo_x86 *c = &cpu_data(cpu);
- /*
- * For perf, we return last level cache shared map.
- * And for power savings, we return cpu_core_map
- */
- if (!(cpu_has(c, X86_FEATURE_AMD_DCM)))
- return cpu_core_mask(cpu);
- else
- return cpu_llc_shared_mask(cpu);
+ return cpu_llc_shared_mask(cpu);
}
static void impress_friends(void)
return nr;
}
+#ifdef CONFIG_SECCOMP
+static int vsyscall_seccomp(struct task_struct *tsk, int syscall_nr)
+{
+ if (!seccomp_mode(&tsk->seccomp))
+ return 0;
+ task_pt_regs(tsk)->orig_ax = syscall_nr;
+ task_pt_regs(tsk)->ax = syscall_nr;
+ return __secure_computing(syscall_nr);
+}
+#else
+#define vsyscall_seccomp(_tsk, _nr) 0
+#endif
+
static bool write_ok_or_segv(unsigned long ptr, size_t size)
{
/*
int vsyscall_nr;
int prev_sig_on_uaccess_error;
long ret;
+ int skip;
/*
* No point in checking CS -- the only way to get here is a user mode
}
tsk = current;
- if (seccomp_mode(&tsk->seccomp))
- do_exit(SIGKILL);
-
/*
* With a real vsyscall, page faults cause SIGSEGV. We want to
* preserve that behavior to make writing exploits harder.
* address 0".
*/
ret = -EFAULT;
+ skip = 0;
switch (vsyscall_nr) {
case 0:
+ skip = vsyscall_seccomp(tsk, __NR_gettimeofday);
+ if (skip)
+ break;
+
if (!write_ok_or_segv(regs->di, sizeof(struct timeval)) ||
!write_ok_or_segv(regs->si, sizeof(struct timezone)))
break;
break;
case 1:
+ skip = vsyscall_seccomp(tsk, __NR_time);
+ if (skip)
+ break;
+
if (!write_ok_or_segv(regs->di, sizeof(time_t)))
break;
break;
case 2:
+ skip = vsyscall_seccomp(tsk, __NR_getcpu);
+ if (skip)
+ break;
+
if (!write_ok_or_segv(regs->di, sizeof(unsigned)) ||
!write_ok_or_segv(regs->si, sizeof(unsigned)))
break;
current_thread_info()->sig_on_uaccess_error = prev_sig_on_uaccess_error;
+ if (skip) {
+ if ((long)regs->ax <= 0L) /* seccomp errno emulation */
+ goto do_ret;
+ goto done; /* seccomp trace/trap */
+ }
+
if (ret == -EFAULT) {
/* Bad news -- userspace fed a bad pointer to a vsyscall. */
warn_bad_vsyscall(KERN_INFO, regs,
regs->ax = ret;
+do_ret:
/* Emulate a ret instruction. */
regs->ip = caller;
regs->sp += 8;
-
+done:
return true;
sigsegv:
{
struct kvm_mmu_page *page;
+ if (list_empty(&kvm->arch.active_mmu_pages))
+ return;
+
page = container_of(kvm->arch.active_mmu_pages.prev,
struct kvm_mmu_page, link);
kvm_mmu_prepare_zap_page(kvm, page, invalid_list);
* @src: source address
* @dst: destination address
* @len: number of bytes to be copied.
- * @isum: initial sum that is added into the result (32bit unfolded)
+ * @sum: initial sum that is added into the result (32bit unfolded)
*
* Returns an 32bit unfolded checksum of the buffer.
*/
#include <linux/module.h>
#include <asm/word-at-a-time.h>
+#include <linux/sched.h>
/*
* best effort, GUP based copy_from_user() that is NMI-safe
void *map;
int ret;
+ if (__range_not_ok(from, n, TASK_SIZE))
+ return len;
+
do {
ret = __get_user_pages_fast(addr, 1, 0, &page);
if (!ret)
# - (66): the last prefix is 0x66
# - (F3): the last prefix is 0xF3
# - (F2): the last prefix is 0xF2
-#
+# - (!F3) : the last prefix is not 0xF3 (including non-last prefix case)
Table: one byte opcode
Referrer:
b5: LGS Gv,Mp
b6: MOVZX Gv,Eb
b7: MOVZX Gv,Ew
-b8: JMPE | POPCNT Gv,Ev (F3)
+b8: JMPE (!F3) | POPCNT Gv,Ev (F3)
b9: Grp10 (1A)
ba: Grp8 Ev,Ib (1A)
bb: BTC Ev,Gv
-bc: BSF Gv,Ev | TZCNT Gv,Ev (F3)
-bd: BSR Gv,Ev | LZCNT Gv,Ev (F3)
+bc: BSF Gv,Ev (!F3) | TZCNT Gv,Ev (F3)
+bd: BSR Gv,Ev (!F3) | LZCNT Gv,Ev (F3)
be: MOVSX Gv,Eb
bf: MOVSX Gv,Ew
# 0x0f 0xc0-0xcf
extra += PMD_SIZE;
#endif
/* The first 2/4M doesn't use large pages. */
- extra += mr->end - mr->start;
+ if (mr->start < PMD_SIZE)
+ extra += mr->end - mr->start;
ptes = (extra + PAGE_SIZE - 1) >> PAGE_SHIFT;
} else
/**
* ioremap_nocache - map bus memory into CPU space
- * @offset: bus address of the memory
+ * @phys_addr: bus address of the memory
* @size: size of the resource to map
*
* ioremap_nocache performs a platform specific sequence of operations to
/**
* ioremap_wc - map memory into CPU space write combined
- * @offset: bus address of the memory
+ * @phys_addr: bus address of the memory
* @size: size of the resource to map
*
* This version of ioremap ensures that the memory is marked write combining.
/**
* clflush_cache_range - flush a cache range with clflush
- * @addr: virtual start address
+ * @vaddr: virtual start address
* @size: number of bytes to flush
*
* clflush is an unordered instruction which needs fencing with mfence
return;
}
+ node_set(node, numa_nodes_parsed);
+
printk(KERN_INFO "SRAT: Node %u PXM %u [mem %#010Lx-%#010Lx]\n",
node, pxm,
(unsigned long long) start, (unsigned long long) end - 1);
static int dumper_registered;
static void dw_kmsg_dump(struct kmsg_dumper *dumper,
- enum kmsg_dump_reason reason,
- const char *s1, unsigned long l1,
- const char *s2, unsigned long l2)
+ enum kmsg_dump_reason reason)
{
- int i;
+ static char line[1024];
+ size_t len;
/* When run to this, we'd better re-init the HW */
mrst_early_console_init();
- for (i = 0; i < l1; i++)
- early_mrst_console.write(&early_mrst_console, s1 + i, 1);
- for (i = 0; i < l2; i++)
- early_mrst_console.write(&early_mrst_console, s2 + i, 1);
+ while (kmsg_dump_get_line(dumper, true, line, sizeof(line), &len))
+ early_mrst_console.write(&early_mrst_console, line, len);
}
/* Set the ratio rate to 115200, 8n1, IRQ disabled */
EXPORT_SYMBOL_GPL(intel_scu_notifier);
/* Called by IPC driver */
-void intel_scu_devices_create(void)
+void __devinit intel_scu_devices_create(void)
{
int i;
*/
mmr_image |= (1L << SOFTACK_MSHIFT);
if (is_uv2_hub()) {
- mmr_image &= ~(1L << UV2_LEG_SHFT);
mmr_image |= (1L << UV2_EXT_SHFT);
}
write_mmr_misc_control(pnode, mmr_image);
rex_expr = "^REX(\\.[XRWB]+)*"
fpu_expr = "^ESC" # TODO
- lprefix1_expr = "\\(66\\)"
+ lprefix1_expr = "\\((66|!F3)\\)"
lprefix2_expr = "\\(F3\\)"
- lprefix3_expr = "\\(F2\\)"
+ lprefix3_expr = "\\((F2|!F3)\\)"
+ lprefix_expr = "\\((66|F2|F3)\\)"
max_lprefix = 4
# All opcodes starting with lower-case 'v' or with (v1) superscript
if (match(ext, lprefix1_expr)) {
lptable1[idx] = add_flags(lptable1[idx],flags)
variant = "INAT_VARIANT"
- } else if (match(ext, lprefix2_expr)) {
+ }
+ if (match(ext, lprefix2_expr)) {
lptable2[idx] = add_flags(lptable2[idx],flags)
variant = "INAT_VARIANT"
- } else if (match(ext, lprefix3_expr)) {
+ }
+ if (match(ext, lprefix3_expr)) {
lptable3[idx] = add_flags(lptable3[idx],flags)
variant = "INAT_VARIANT"
- } else {
+ }
+ if (!match(ext, lprefix_expr)){
table[idx] = add_flags(table[idx],flags)
}
}
#undef __SYSCALL_I386
#define __SYSCALL_I386(nr, sym, compat) [ nr ] = sym,
-typedef void (*sys_call_ptr_t)(void);
+typedef asmlinkage void (*sys_call_ptr_t)(void);
-extern void sys_ni_syscall(void);
+extern asmlinkage void sys_ni_syscall(void);
const sys_call_ptr_t sys_call_table[] __cacheline_aligned = {
/*
xen_feature(XENFEAT_mmu_pt_update_preserve_ad) ? " (preserve-AD)" : "");
}
+#define CPUID_THERM_POWER_LEAF 6
+#define APERFMPERF_PRESENT 0
+
static __read_mostly unsigned int cpuid_leaf1_edx_mask = ~0;
static __read_mostly unsigned int cpuid_leaf1_ecx_mask = ~0;
*dx = cpuid_leaf5_edx_val;
return;
+ case CPUID_THERM_POWER_LEAF:
+ /* Disabling APERFMPERF for kernel usage */
+ maskecx = ~(1 << APERFMPERF_PRESENT);
+ break;
+
case 0xb:
/* Suppress extended topology stuff */
maskebx = 0;
unsigned long uninitialized_var(address);
unsigned level;
pte_t *ptep = NULL;
+ int ret = 0;
pfn = page_to_pfn(page);
if (!PageHighMem(page)) {
list_add(&page->lru, &m2p_overrides[mfn_hash(mfn)]);
spin_unlock_irqrestore(&m2p_override_lock, flags);
+ /* p2m(m2p(mfn)) == mfn: the mfn is already present somewhere in
+ * this domain. Set the FOREIGN_FRAME_BIT in the p2m for the other
+ * pfn so that the following mfn_to_pfn(mfn) calls will return the
+ * pfn from the m2p_override (the backend pfn) instead.
+ * We need to do this because the pages shared by the frontend
+ * (xen-blkfront) can be already locked (lock_page, called by
+ * do_read_cache_page); when the userspace backend tries to use them
+ * with direct_IO, mfn_to_pfn returns the pfn of the frontend, so
+ * do_blockdev_direct_IO is going to try to lock the same pages
+ * again resulting in a deadlock.
+ * As a side effect get_user_pages_fast might not be safe on the
+ * frontend pages while they are being shared with the backend,
+ * because mfn_to_pfn (that ends up being called by GUPF) will
+ * return the backend pfn rather than the frontend pfn. */
+ ret = __get_user(pfn, &machine_to_phys_mapping[mfn]);
+ if (ret == 0 && get_phys_to_machine(pfn) == mfn)
+ set_phys_to_machine(pfn, FOREIGN_FRAME(mfn));
+
return 0;
}
EXPORT_SYMBOL_GPL(m2p_add_override);
unsigned long uninitialized_var(address);
unsigned level;
pte_t *ptep = NULL;
+ int ret = 0;
pfn = page_to_pfn(page);
mfn = get_phys_to_machine(pfn);
} else
set_phys_to_machine(pfn, page->index);
+ /* p2m(m2p(mfn)) == FOREIGN_FRAME(mfn): the mfn is already present
+ * somewhere in this domain, even before being added to the
+ * m2p_override (see comment above in m2p_add_override).
+ * If there are no other entries in the m2p_override corresponding
+ * to this mfn, then remove the FOREIGN_FRAME_BIT from the p2m for
+ * the original pfn (the one shared by the frontend): the backend
+ * cannot do any IO on this page anymore because it has been
+ * unshared. Removing the FOREIGN_FRAME_BIT from the p2m entry of
+ * the original pfn causes mfn_to_pfn(mfn) to return the frontend
+ * pfn again. */
+ mfn &= ~FOREIGN_FRAME_BIT;
+ ret = __get_user(pfn, &machine_to_phys_mapping[mfn]);
+ if (ret == 0 && get_phys_to_machine(pfn) == FOREIGN_FRAME(mfn) &&
+ m2p_find_override(mfn) == NULL)
+ set_phys_to_machine(pfn, mfn);
+
return 0;
}
EXPORT_SYMBOL_GPL(m2p_remove_override);
populated = xen_populate_chunk(map, memmap.nr_entries,
max_pfn, &last_pfn, xen_released_pages);
- extra_pages += (xen_released_pages - populated);
+ xen_released_pages -= populated;
+ extra_pages += xen_released_pages;
if (last_pfn > max_pfn) {
max_pfn = min(MAX_DOMAIN_PAGES, last_pfn);
# Only build variant and/or platform if it includes a Makefile
-buildvar := $(shell test -a $(srctree)/arch/xtensa/variants/$(VARIANT)/Makefile && echo arch/xtensa/variants/$(VARIANT)/)
-buildplf := $(shell test -a $(srctree)/arch/xtensa/platforms/$(PLATFORM)/Makefile && echo arch/xtensa/platforms/$(PLATFORM)/)
+buildvar := $(shell test -e $(srctree)/arch/xtensa/variants/$(VARIANT)/Makefile && echo arch/xtensa/variants/$(VARIANT)/)
+buildplf := $(shell test -e $(srctree)/arch/xtensa/platforms/$(PLATFORM)/Makefile && echo arch/xtensa/platforms/$(PLATFORM)/)
# Find libgcc.a
asmlinkage long sys_ppoll(struct pollfd __user *ufds, unsigned int nfds,
struct timespec __user *tsp, const sigset_t __user *sigmask,
size_t sigsetsize);
-
-
+asmlinkage long sys_rt_sigsuspend(sigset_t __user *unewset,
+ size_t sigsetsize);
/* Don't leak any random bits. */
- memset(elfregs, 0, sizeof (elfregs));
+ memset(elfregs, 0, sizeof(*elfregs));
/* Note: PS.EXCM is not set while user task is running; its
* being set in regs->ps is for exception handling convenience.
if (ret)
return;
- signal_delivered(signr, info, ka, regs, 0);
+ signal_delivered(signr, &info, &ka, regs, 0);
if (current->ptrace & PT_SINGLESTEP)
task_pt_regs(current)->icountlevel = 1;
_text = .;
_stext = .;
- _ftext = .;
.text :
{
EXCEPTION_TABLE(16)
/* Data section */
- _fdata = .;
+ _sdata = .;
RW_DATA_SECTION(XCHAL_ICACHE_LINESIZE, PAGE_SIZE, THREAD_SIZE)
_edata = .;
#include <asm/bootparam.h>
#include <asm/page.h>
-
-/* References to section boundaries */
-
-extern char _ftext, _etext, _fdata, _edata, _rodata_end;
-extern char __init_begin, __init_end;
+#include <asm/sections.h>
/*
* mem_reserve(start, end, must_exist)
reservedpages++;
}
- codesize = (unsigned long) &_etext - (unsigned long) &_ftext;
- datasize = (unsigned long) &_edata - (unsigned long) &_fdata;
- initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin;
+ codesize = (unsigned long) _etext - (unsigned long) _stext;
+ datasize = (unsigned long) _edata - (unsigned long) _sdata;
+ initsize = (unsigned long) __init_end - (unsigned long) __init_begin;
printk("Memory: %luk/%luk available (%ldk kernel code, %ldk reserved, "
"%ldk data, %ldk init %ldk highmem)\n",
void free_initmem(void)
{
- free_reserved_mem(&__init_begin, &__init_end);
- printk("Freeing unused kernel memory: %dk freed\n",
- (&__init_end - &__init_begin) >> 10);
+ free_reserved_mem(__init_begin, __init_end);
+ printk("Freeing unused kernel memory: %zuk freed\n",
+ (__init_end - __init_begin) >> 10);
}
blkg->pd[i] = pd;
pd->blkg = blkg;
- }
-
- /* invoke per-policy init */
- for (i = 0; i < BLKCG_MAX_POLS; i++) {
- struct blkcg_policy *pol = blkcg_policy[i];
+ /* invoke per-policy init */
if (blkcg_policy_enabled(blkg->q, pol))
pol->pd_init_fn(blkg);
}
static void blkg_destroy(struct blkcg_gq *blkg)
{
- struct request_queue *q = blkg->q;
struct blkcg *blkcg = blkg->blkcg;
- lockdep_assert_held(q->queue_lock);
+ lockdep_assert_held(blkg->q->queue_lock);
lockdep_assert_held(&blkcg->lock);
/* Something wrong if we are trying to remove same group twice */
*/
void blk_drain_queue(struct request_queue *q, bool drain_all)
{
+ int i;
+
while (true) {
bool drain = false;
- int i;
spin_lock_irq(q->queue_lock);
break;
msleep(10);
}
+
+ /*
+ * With queue marked dead, any woken up waiter will fail the
+ * allocation path, so the wakeup chaining is lost and we're
+ * left with hung waiters. We need to wake up those waiters.
+ */
+ if (q->request_fn) {
+ spin_lock_irq(q->queue_lock);
+ for (i = 0; i < ARRAY_SIZE(q->rq.wait); i++)
+ wake_up_all(&q->rq.wait[i]);
+ spin_unlock_irq(q->queue_lock);
+ }
}
/**
/* mark @q DEAD, no new request or merges will be allowed afterwards */
mutex_lock(&q->sysfs_lock);
queue_flag_set_unlocked(QUEUE_FLAG_DEAD, q);
-
spin_lock_irq(lock);
/*
queue_flag_set(QUEUE_FLAG_NOMERGES, q);
queue_flag_set(QUEUE_FLAG_NOXMERGES, q);
queue_flag_set(QUEUE_FLAG_DEAD, q);
-
- if (q->queue_lock != &q->__queue_lock)
- q->queue_lock = &q->__queue_lock;
-
spin_unlock_irq(lock);
mutex_unlock(&q->sysfs_lock);
del_timer_sync(&q->backing_dev_info.laptop_mode_wb_timer);
blk_sync_queue(q);
+ spin_lock_irq(lock);
+ if (q->queue_lock != &q->__queue_lock)
+ q->queue_lock = &q->__queue_lock;
+ spin_unlock_irq(lock);
+
/* @q is and will stay empty, shutdown and put */
blk_put_queue(q);
}
mod_timer(&q->timeout, expiry);
}
-/**
- * blk_abort_queue -- Abort all request on given queue
- * @queue: pointer to queue
- *
- */
-void blk_abort_queue(struct request_queue *q)
-{
- unsigned long flags;
- struct request *rq, *tmp;
- LIST_HEAD(list);
-
- /*
- * Not a request based block device, nothing to abort
- */
- if (!q->request_fn)
- return;
-
- spin_lock_irqsave(q->queue_lock, flags);
-
- elv_abort_queue(q);
-
- /*
- * Splice entries to local list, to avoid deadlocking if entries
- * get readded to the timeout list by error handling
- */
- list_splice_init(&q->timeout_list, &list);
-
- list_for_each_entry_safe(rq, tmp, &list, timeout_list)
- blk_abort_request(rq);
-
- /*
- * Occasionally, blk_abort_request() will return without
- * deleting the element from the list. Make sure we add those back
- * instead of leaving them on the local stack list.
- */
- list_splice(&list, &q->timeout_list);
-
- spin_unlock_irqrestore(q->queue_lock, flags);
-
-}
-EXPORT_SYMBOL_GPL(blk_abort_queue);
#include "blk.h"
#include "blk-cgroup.h"
-static struct blkcg_policy blkcg_policy_cfq __maybe_unused;
-
/*
* tunables
*/
return pd ? container_of(pd, struct cfq_group, pd) : NULL;
}
-static inline struct cfq_group *blkg_to_cfqg(struct blkcg_gq *blkg)
-{
- return pd_to_cfqg(blkg_to_pd(blkg, &blkcg_policy_cfq));
-}
-
static inline struct blkcg_gq *cfqg_to_blkg(struct cfq_group *cfqg)
{
return pd_to_blkg(&cfqg->pd);
#ifdef CONFIG_CFQ_GROUP_IOSCHED
+static struct blkcg_policy blkcg_policy_cfq;
+
+static inline struct cfq_group *blkg_to_cfqg(struct blkcg_gq *blkg)
+{
+ return pd_to_cfqg(blkg_to_pd(blkg, &blkcg_policy_cfq));
+}
+
static inline void cfqg_get(struct cfq_group *cfqg)
{
return blkg_get(cfqg_to_blkg(cfqg));
cfq_shutdown_timer_wq(cfqd);
-#ifndef CONFIG_CFQ_GROUP_IOSCHED
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
+ blkcg_deactivate_policy(q, &blkcg_policy_cfq);
+#else
kfree(cfqd->root_group);
#endif
- blkcg_deactivate_policy(q, &blkcg_policy_cfq);
kfree(cfqd);
}
#ifdef CONFIG_CFQ_GROUP_IOSCHED
if (!cfq_group_idle)
cfq_group_idle = 1;
-#else
- cfq_group_idle = 0;
-#endif
ret = blkcg_policy_register(&blkcg_policy_cfq);
if (ret)
return ret;
+#else
+ cfq_group_idle = 0;
+#endif
+ ret = -ENOMEM;
cfq_pool = KMEM_CACHE(cfq_queue, 0);
if (!cfq_pool)
goto err_pol_unreg;
err_free_pool:
kmem_cache_destroy(cfq_pool);
err_pol_unreg:
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
blkcg_policy_unregister(&blkcg_policy_cfq);
+#endif
return ret;
}
static void __exit cfq_exit(void)
{
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
blkcg_policy_unregister(&blkcg_policy_cfq);
+#endif
elv_unregister(&iosched_cfq);
kmem_cache_destroy(cfq_pool);
}
break;
}
+ if (capable(CAP_SYS_RAWIO))
+ return 0;
+
/* In particular, rule out all resets and host-specific ioctls. */
printk_ratelimited(KERN_WARNING
"%s: sending ioctl %x to a partition!\n", current->comm, cmd);
- return capable(CAP_SYS_RAWIO) ? 0 : -ENOIOCTLCMD;
+ return -ENOIOCTLCMD;
}
EXPORT_SYMBOL(scsi_verify_blk_ioctl);
config ACPI_HOTPLUG_CPU
bool
- depends on ACPI_PROCESSOR && HOTPLUG_CPU
+ depends on EXPERIMENTAL && ACPI_PROCESSOR && HOTPLUG_CPU
select ACPI_CONTAINER
default y
ac->charger.properties = ac_props;
ac->charger.num_properties = ARRAY_SIZE(ac_props);
ac->charger.get_property = get_ac_property;
- power_supply_register(&ac->device->dev, &ac->charger);
+ result = power_supply_register(&ac->device->dev, &ac->charger);
+ if (result)
+ goto end;
printk(KERN_INFO PREFIX "%s [%s] (%s)\n",
acpi_device_name(device), acpi_device_bid(device),
#define ACPI_PROCESSOR_AGGREGATOR_DEVICE_NAME "Processor Aggregator"
#define ACPI_PROCESSOR_AGGREGATOR_NOTIFY 0x80
static DEFINE_MUTEX(isolated_cpus_lock);
+static DEFINE_MUTEX(round_robin_lock);
static unsigned long power_saving_mwait_eax;
if (!alloc_cpumask_var(&tmp, GFP_KERNEL))
return;
- mutex_lock(&isolated_cpus_lock);
+ mutex_lock(&round_robin_lock);
cpumask_clear(tmp);
for_each_cpu(cpu, pad_busy_cpus)
cpumask_or(tmp, tmp, topology_thread_cpumask(cpu));
if (cpumask_empty(tmp))
cpumask_andnot(tmp, cpu_online_mask, pad_busy_cpus);
if (cpumask_empty(tmp)) {
- mutex_unlock(&isolated_cpus_lock);
+ mutex_unlock(&round_robin_lock);
return;
}
for_each_cpu(cpu, tmp) {
tsk_in_cpu[tsk_index] = preferred_cpu;
cpumask_set_cpu(preferred_cpu, pad_busy_cpus);
cpu_weight[preferred_cpu]++;
- mutex_unlock(&isolated_cpus_lock);
+ mutex_unlock(&round_robin_lock);
set_cpus_allowed_ptr(current, cpumask_of(preferred_cpu));
}
}
static unsigned int idle_pct = 5; /* percentage */
-static unsigned int round_robin_time = 10; /* second */
+static unsigned int round_robin_time = 1; /* second */
static int power_saving_thread(void *data)
{
struct sched_param param = {.sched_priority = 1};
ps_tsks[ps_tsk_num] = kthread_run(power_saving_thread,
(void *)(unsigned long)ps_tsk_num,
- "power_saving/%d", ps_tsk_num);
+ "acpi_pad/%d", ps_tsk_num);
rc = IS_ERR(ps_tsks[ps_tsk_num]) ? PTR_ERR(ps_tsks[ps_tsk_num]) : 0;
if (!rc)
ps_tsk_num++;
tbinstal.o \
tbutils.o \
tbxface.o \
+ tbxfload.o \
tbxfroot.o
acpi-y += \
utaddress.o \
utalloc.o \
utcopy.o \
+ utexcep.o \
utdebug.o \
utdecode.o \
utdelete.o \
acpi_status acpi_ev_remove_sci_handler(void);
-u32 acpi_ev_initialize_sCI(u32 program_sCI);
+u32 acpi_ev_initialize_SCI(u32 program_SCI);
ACPI_HW_DEPENDENT_RETURN_VOID(void acpi_ev_terminate(void))
#endif /* __ACEVENTS_H__ */
/* Global handlers */
-ACPI_EXTERN struct acpi_object_notify_handler acpi_gbl_device_notify;
-ACPI_EXTERN struct acpi_object_notify_handler acpi_gbl_system_notify;
+ACPI_EXTERN struct acpi_global_notify_handler acpi_gbl_global_notify[2];
ACPI_EXTERN acpi_exception_handler acpi_gbl_exception_handler;
ACPI_EXTERN acpi_init_handler acpi_gbl_init_handler;
ACPI_EXTERN acpi_tbl_handler acpi_gbl_table_handler;
#endif
-/* Exception codes */
-
-extern char const *acpi_gbl_exception_names_env[];
-extern char const *acpi_gbl_exception_names_pgm[];
-extern char const *acpi_gbl_exception_names_tbl[];
-extern char const *acpi_gbl_exception_names_aml[];
-extern char const *acpi_gbl_exception_names_ctrl[];
-
/*****************************************************************************
*
* Namespace globals
#endif /* ACPI_DEBUGGER */
+/*****************************************************************************
+ *
+ * Info/help support
+ *
+ ****************************************************************************/
+
+extern const struct ah_predefined_name asl_predefined_info[];
+
#endif /* __ACGLOBAL_H__ */
* Information structure for ACPI predefined names.
* Each entry in the table contains the following items:
*
- * Name - The ACPI reserved name
+ * name - The ACPI reserved name
* param_count - Number of arguments to the method
* expected_return_btypes - Allowed type(s) for the return value
*/
u8 originally_enabled; /* True if GPE was originally enabled */
};
+/* Notify info for implicit notify, multiple device objects */
+
+struct acpi_gpe_notify_info {
+ struct acpi_namespace_node *device_node; /* Device to be notified */
+ struct acpi_gpe_notify_info *next;
+};
+
struct acpi_gpe_notify_object {
struct acpi_namespace_node *node;
struct acpi_gpe_notify_object *next;
union acpi_gpe_dispatch_info {
struct acpi_namespace_node *method_node; /* Method node for this GPE level */
struct acpi_gpe_handler_info *handler; /* Installed GPE handler */
- struct acpi_gpe_notify_object device; /* List of _PRW devices for implicit notify */
+ struct acpi_gpe_notify_info *notify_list; /* List of _PRW devices for implicit notifies */
};
/*
* NOTE: Important to keep this struct as small as possible.
*/
struct acpi_gpe_event_info {
- union acpi_gpe_dispatch_info dispatch; /* Either Method or Handler */
+ union acpi_gpe_dispatch_info dispatch; /* Either Method, Handler, or notify_list */
struct acpi_gpe_register_info *register_info; /* Backpointer to register info */
u8 flags; /* Misc info about this GPE */
u8 gpe_number; /* This GPE */
typedef acpi_status(*acpi_parse_upwards) (struct acpi_walk_state * walk_state);
+/* Global handlers for AML Notifies */
+
+struct acpi_global_notify_handler {
+ acpi_notify_handler handler;
+ void *context;
+};
+
/*
* Notify info - used to pass info to the deferred notify
* handler/dispatcher.
*/
struct acpi_notify_info {
- ACPI_STATE_COMMON struct acpi_namespace_node *node;
- union acpi_operand_object *handler_obj;
+ ACPI_STATE_COMMON u8 handler_list_id;
+ struct acpi_namespace_node *node;
+ union acpi_operand_object *handler_list_head;
+ struct acpi_global_notify_handler *global;
};
/* Generic state is union of structs above */
u32 name; /* 4-byte name or zero if no name */
};
-/* This version is used by the i_aSL compiler only */
+/* This version is used by the iASL compiler only */
#define ACPI_MAX_PARSEOP_NAME 20
#define ACPI_PARSEOP_IGNORE 0x01
#define ACPI_PARSEOP_PARAMLIST 0x02
#define ACPI_PARSEOP_EMPTY_TERMLIST 0x04
+#define ACPI_PARSEOP_PREDEF_CHECKED 0x08
#define ACPI_PARSEOP_SPECIAL 0x10
/*****************************************************************************
#define ACPI_MEM_LIST_MAX 1
#define ACPI_NUM_MEM_LISTS 2
+/*****************************************************************************
+ *
+ * Info/help support
+ *
+ ****************************************************************************/
+
+struct ah_predefined_name {
+ char *name;
+ char *description;
+#ifndef ACPI_ASL_COMPILER
+ char *action;
+#endif
+};
+
#endif /* __ACLOCAL_H__ */
* printf() format helpers
*/
-/* Split 64-bit integer into two 32-bit values. Use with %8.8_x%8.8_x */
+/* Split 64-bit integer into two 32-bit values. Use with %8.8X%8.8X */
#define ACPI_FORMAT_UINT64(i) ACPI_HIDWORD(i), ACPI_LODWORD(i)
#define ACPI_INSERT_BITS(target, mask, source) target = ((target & (~(mask))) | (source & mask))
/*
- * A struct acpi_namespace_node can appear in some contexts
- * where a pointer to a union acpi_operand_object can also
+ * An object of type struct acpi_namespace_node can appear in some contexts
+ * where a pointer to an object of type union acpi_operand_object can also
* appear. This macro is used to distinguish them.
*
* The "Descriptor" field is the first field in both structures.
};
/*
- * Note: The String and Buffer object must be identical through the Pointer
- * and length elements. There is code that depends on this.
+ * Note: The String and Buffer object must be identical through the
+ * pointer and length elements. There is code that depends on this.
*
* Fields common to both Strings and Buffers
*/
* Common fields for objects that support ASL notifications
*/
#define ACPI_COMMON_NOTIFY_INFO \
- union acpi_operand_object *system_notify; /* Handler for system notifies */\
- union acpi_operand_object *device_notify; /* Handler for driver notifies */\
+ union acpi_operand_object *notify_list[2]; /* Handlers for system/device notifies */\
union acpi_operand_object *handler; /* Handler for Address space */
struct acpi_object_notify_common { /* COMMON NOTIFY for POWER, PROCESSOR, DEVICE, and THERMAL */
struct acpi_object_notify_handler {
ACPI_OBJECT_COMMON_HEADER struct acpi_namespace_node *node; /* Parent device */
- u32 handler_type;
- acpi_notify_handler handler;
+ u32 handler_type; /* Type: Device/System/Both */
+ acpi_notify_handler handler; /* Handler address */
void *context;
- struct acpi_object_notify_handler *next;
+ union acpi_operand_object *next[2]; /* Device and System handler lists */
};
struct acpi_object_addr_handler {
/******************************************************************************
*
- * union acpi_operand_object Descriptor - a giant union of all of the above
+ * union acpi_operand_object descriptor - a giant union of all of the above
*
*****************************************************************************/
*
* The main entries in the table each contain the following items:
*
- * Name - The ACPI reserved name
+ * name - The ACPI reserved name
* param_count - Number of arguments to the method
* expected_btypes - Allowed type(s) for the return value.
* 0 means that no return value is expected.
{{"_TMP", 0, ACPI_RTYPE_INTEGER}},
{{"_TPC", 0, ACPI_RTYPE_INTEGER}},
{{"_TPT", 1, 0}},
- {{"_TRT", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Pkgs) each 2_ref/6_int */
+ {{"_TRT", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Pkgs) each 2 Ref/6 Int */
{{{ACPI_PTYPE2, ACPI_RTYPE_REFERENCE, 2, ACPI_RTYPE_INTEGER}, 6, 0}},
- {{"_TSD", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Pkgs) each 5_int with count */
+ {{"_TSD", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Pkgs) each 5 Int with count */
{{{ACPI_PTYPE2_COUNT,ACPI_RTYPE_INTEGER, 5,0}, 0,0}},
{{"_TSP", 0, ACPI_RTYPE_INTEGER}},
- {{"_TSS", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Pkgs) each 5_int */
+ {{"_TSS", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Pkgs) each 5 Int */
{{{ACPI_PTYPE2, ACPI_RTYPE_INTEGER, 5,0}, 0,0}},
{{"_TST", 0, ACPI_RTYPE_INTEGER}},
#define ACPI_WALK_METHOD 0x01
#define ACPI_WALK_METHOD_RESTART 0x02
-/* Flags for i_aSL compiler only */
+/* Flags for iASL compiler only */
#define ACPI_WALK_CONST_REQUIRED 0x10
#define ACPI_WALK_CONST_OPTIONAL 0x20
/*
* utmisc
*/
+void ut_convert_backslashes(char *pathname);
+
const char *acpi_ut_validate_exception(acpi_status status);
u8 acpi_ut_is_pci_root_bridge(char *id);
/*
* Combination opcodes (actually two one-byte opcodes)
- * Used by the disassembler and i_aSL compiler
+ * Used by the disassembler and iASL compiler
*/
#define AML_LGREATEREQUAL_OP (u16) 0x9295
#define AML_LLESSEQUAL_OP (u16) 0x9294
/* Multiple/complex types */
-#define ARGI_DATAOBJECT 0x12 /* Buffer, String, package or reference to a Node - Used only by size_of operator */
+#define ARGI_DATAOBJECT 0x12 /* Buffer, String, package or reference to a node - Used only by size_of operator */
#define ARGI_COMPLEXOBJ 0x13 /* Buffer, String, or package (Used by INDEX op only) */
#define ARGI_REF_OR_STRING 0x14 /* Reference or String (Used by DEREFOF op only) */
#define ARGI_REGION_OR_BUFFER 0x15 /* Used by LOAD op only */
#define ACPI_RESTAG_TRANSLATION "_TRA"
#define ACPI_RESTAG_TRANSTYPE "_TRS" /* Sparse(1), Dense(0) */
#define ACPI_RESTAG_TYPE "_TTP" /* Translation(1), Static (0) */
-#define ACPI_RESTAG_XFERTYPE "_SIZ" /* 8(0), 8_and16(1), 16(2) */
+#define ACPI_RESTAG_XFERTYPE "_SIZ" /* 8(0), 8And16(1), 16(2) */
#define ACPI_RESTAG_VENDORDATA "_VEN"
/* Default sizes for "small" resource descriptors */
struct aml_resource_extended_address64 {
AML_RESOURCE_LARGE_HEADER_COMMON
- AML_RESOURCE_ADDRESS_COMMON u8 revision_iD;
+ AML_RESOURCE_ADDRESS_COMMON u8 revision_ID;
u8 reserved;
u64 granularity;
u64 minimum;
*
* FUNCTION: acpi_ds_execute_arguments
*
- * PARAMETERS: Node - Object NS node
+ * PARAMETERS: node - Object NS node
* scope_node - Parent NS node
* aml_length - Length of executable AML
* aml_start - Pointer to the AML
* FUNCTION: acpi_ds_exec_begin_control_op
*
* PARAMETERS: walk_list - The list that owns the walk stack
- * Op - The control Op
+ * op - The control Op
*
* RETURN: Status
*
* FUNCTION: acpi_ds_exec_end_control_op
*
* PARAMETERS: walk_list - The list that owns the walk stack
- * Op - The control Op
+ * op - The control Op
*
* RETURN: Status
*
ACPI_MODULE_NAME("dsfield")
/* Local prototypes */
+#ifdef ACPI_ASL_COMPILER
+#include "acdisasm.h"
+static acpi_status
+acpi_ds_create_external_region(acpi_status lookup_status,
+ union acpi_parse_object *op,
+ char *path,
+ struct acpi_walk_state *walk_state,
+ struct acpi_namespace_node **node);
+#endif
+
static acpi_status
acpi_ds_get_field_names(struct acpi_create_field_info *info,
struct acpi_walk_state *walk_state,
union acpi_parse_object *arg);
+#ifdef ACPI_ASL_COMPILER
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ds_create_external_region (iASL Disassembler only)
+ *
+ * PARAMETERS: lookup_status - Status from ns_lookup operation
+ * op - Op containing the Field definition and args
+ * path - Pathname of the region
+ * ` walk_state - Current method state
+ * node - Where the new region node is returned
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Add region to the external list if NOT_FOUND. Create a new
+ * region node/object.
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ds_create_external_region(acpi_status lookup_status,
+ union acpi_parse_object *op,
+ char *path,
+ struct acpi_walk_state *walk_state,
+ struct acpi_namespace_node **node)
+{
+ acpi_status status;
+ union acpi_operand_object *obj_desc;
+
+ if (lookup_status != AE_NOT_FOUND) {
+ return (lookup_status);
+ }
+
+ /*
+ * Table disassembly:
+ * operation_region not found. Generate an External for it, and
+ * insert the name into the namespace.
+ */
+ acpi_dm_add_to_external_list(op, path, ACPI_TYPE_REGION, 0);
+ status = acpi_ns_lookup(walk_state->scope_info, path, ACPI_TYPE_REGION,
+ ACPI_IMODE_LOAD_PASS1, ACPI_NS_SEARCH_PARENT,
+ walk_state, node);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+
+ /* Must create and install a region object for the new node */
+
+ obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_REGION);
+ if (!obj_desc) {
+ return (AE_NO_MEMORY);
+ }
+
+ obj_desc->region.node = *node;
+ status = acpi_ns_attach_object(*node, obj_desc, ACPI_TYPE_REGION);
+ return (status);
+}
+#endif
+
/*******************************************************************************
*
* FUNCTION: acpi_ds_create_buffer_field
*
- * PARAMETERS: Op - Current parse op (create_xXField)
+ * PARAMETERS: op - Current parse op (create_XXField)
* walk_state - Current state
*
* RETURN: Status
arg = acpi_ps_get_arg(op, 3);
} else {
- /* For all other create_xXXField operators, name is the 3rd argument */
+ /* For all other create_XXXField operators, name is the 3rd argument */
arg = acpi_ps_get_arg(op, 2);
}
*
* FUNCTION: acpi_ds_get_field_names
*
- * PARAMETERS: Info - create_field info structure
+ * PARAMETERS: info - create_field info structure
* ` walk_state - Current method state
- * Arg - First parser arg for the field name list
+ * arg - First parser arg for the field name list
*
* RETURN: Status
*
while (arg) {
/*
* Four types of field elements are handled:
- * 1) Name - Enters a new named field into the namespace
- * 2) Offset - specifies a bit offset
+ * 1) name - Enters a new named field into the namespace
+ * 2) offset - specifies a bit offset
* 3) access_as - changes the access mode/attributes
- * 4) Connection - Associate a resource template with the field
+ * 4) connection - Associate a resource template with the field
*/
switch (arg->common.aml_opcode) {
case AML_INT_RESERVEDFIELD_OP:
*
* FUNCTION: acpi_ds_create_field
*
- * PARAMETERS: Op - Op containing the Field definition and args
+ * PARAMETERS: op - Op containing the Field definition and args
* region_node - Object for the containing Operation Region
* ` walk_state - Current method state
*
/* First arg is the name of the parent op_region (must already exist) */
arg = op->common.value.arg;
+
if (!region_node) {
status =
acpi_ns_lookup(walk_state->scope_info,
arg->common.value.name, ACPI_TYPE_REGION,
ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT,
walk_state, ®ion_node);
+#ifdef ACPI_ASL_COMPILER
+ status = acpi_ds_create_external_region(status, arg,
+ arg->common.value.name,
+ walk_state,
+ ®ion_node);
+#endif
if (ACPI_FAILURE(status)) {
ACPI_ERROR_NAMESPACE(arg->common.value.name, status);
return_ACPI_STATUS(status);
*
* FUNCTION: acpi_ds_init_field_objects
*
- * PARAMETERS: Op - Op containing the Field definition and args
+ * PARAMETERS: op - Op containing the Field definition and args
* ` walk_state - Current method state
*
* RETURN: Status
*
* FUNCTION: acpi_ds_create_bank_field
*
- * PARAMETERS: Op - Op containing the Field definition and args
+ * PARAMETERS: op - Op containing the Field definition and args
* region_node - Object for the containing Operation Region
* walk_state - Current method state
*
arg->common.value.name, ACPI_TYPE_REGION,
ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT,
walk_state, ®ion_node);
+#ifdef ACPI_ASL_COMPILER
+ status = acpi_ds_create_external_region(status, arg,
+ arg->common.value.name,
+ walk_state,
+ ®ion_node);
+#endif
if (ACPI_FAILURE(status)) {
ACPI_ERROR_NAMESPACE(arg->common.value.name, status);
return_ACPI_STATUS(status);
*
* FUNCTION: acpi_ds_create_index_field
*
- * PARAMETERS: Op - Op containing the Field definition and args
+ * PARAMETERS: op - Op containing the Field definition and args
* region_node - Object for the containing Operation Region
* ` walk_state - Current method state
*
* FUNCTION: acpi_ds_init_one_object
*
* PARAMETERS: obj_handle - Node for the object
- * Level - Current nesting level
- * Context - Points to a init info struct
+ * level - Current nesting level
+ * context - Points to a init info struct
* return_value - Not used
*
* RETURN: Status
*
* FUNCTION: acpi_ds_method_error
*
- * PARAMETERS: Status - Execution status
+ * PARAMETERS: status - Execution status
* walk_state - Current state
*
* RETURN: Status
*
* FUNCTION: acpi_ds_call_control_method
*
- * PARAMETERS: Thread - Info for this thread
+ * PARAMETERS: thread - Info for this thread
* this_walk_state - Current walk state
- * Op - Current Op to be walked
+ * op - Current Op to be walked
*
* RETURN: Status
*
*
* FUNCTION: acpi_ds_method_data_init_args
*
- * PARAMETERS: *Params - Pointer to a parameter list for the method
+ * PARAMETERS: *params - Pointer to a parameter list for the method
* max_param_count - The arg count for this method
* walk_state - Current walk state object
*
*
* FUNCTION: acpi_ds_method_data_get_node
*
- * PARAMETERS: Type - Either ACPI_REFCLASS_LOCAL or
+ * PARAMETERS: type - Either ACPI_REFCLASS_LOCAL or
* ACPI_REFCLASS_ARG
- * Index - Which Local or Arg whose type to get
+ * index - Which Local or Arg whose type to get
* walk_state - Current walk state object
- * Node - Where the node is returned.
+ * node - Where the node is returned.
*
* RETURN: Status and node
*
*
* FUNCTION: acpi_ds_method_data_set_value
*
- * PARAMETERS: Type - Either ACPI_REFCLASS_LOCAL or
+ * PARAMETERS: type - Either ACPI_REFCLASS_LOCAL or
* ACPI_REFCLASS_ARG
- * Index - Which Local or Arg to get
- * Object - Object to be inserted into the stack entry
+ * index - Which Local or Arg to get
+ * object - Object to be inserted into the stack entry
* walk_state - Current walk state object
*
* RETURN: Status
* Increment ref count so object can't be deleted while installed.
* NOTE: We do not copy the object in order to preserve the call by
* reference semantics of ACPI Control Method invocation.
- * (See ACPI Specification 2.0_c)
+ * (See ACPI Specification 2.0C)
*/
acpi_ut_add_reference(object);
*
* FUNCTION: acpi_ds_method_data_get_value
*
- * PARAMETERS: Type - Either ACPI_REFCLASS_LOCAL or
+ * PARAMETERS: type - Either ACPI_REFCLASS_LOCAL or
* ACPI_REFCLASS_ARG
- * Index - Which local_var or argument to get
+ * index - Which localVar or argument to get
* walk_state - Current walk state object
* dest_desc - Where Arg or Local value is returned
*
*
* FUNCTION: acpi_ds_method_data_delete_value
*
- * PARAMETERS: Type - Either ACPI_REFCLASS_LOCAL or
+ * PARAMETERS: type - Either ACPI_REFCLASS_LOCAL or
* ACPI_REFCLASS_ARG
- * Index - Which local_var or argument to delete
+ * index - Which localVar or argument to delete
* walk_state - Current walk state object
*
* RETURN: None
*
* FUNCTION: acpi_ds_store_object_to_local
*
- * PARAMETERS: Type - Either ACPI_REFCLASS_LOCAL or
+ * PARAMETERS: type - Either ACPI_REFCLASS_LOCAL or
* ACPI_REFCLASS_ARG
- * Index - Which Local or Arg to set
+ * index - Which Local or Arg to set
* obj_desc - Value to be stored
* walk_state - Current walk state
*
*
* FUNCTION: acpi_ds_method_data_get_type
*
- * PARAMETERS: Opcode - Either AML_LOCAL_OP or AML_ARG_OP
- * Index - Which Local or Arg whose type to get
+ * PARAMETERS: opcode - Either AML_LOCAL_OP or AML_ARG_OP
+ * index - Which Local or Arg whose type to get
* walk_state - Current walk state object
*
* RETURN: Data type of current value of the selected Arg or Local
* FUNCTION: acpi_ds_build_internal_object
*
* PARAMETERS: walk_state - Current walk state
- * Op - Parser object to be translated
+ * op - Parser object to be translated
* obj_desc_ptr - Where the ACPI internal object is returned
*
* RETURN: Status
* FUNCTION: acpi_ds_build_internal_buffer_obj
*
* PARAMETERS: walk_state - Current walk state
- * Op - Parser object to be translated
+ * op - Parser object to be translated
* buffer_length - Length of the buffer
* obj_desc_ptr - Where the ACPI internal object is returned
*
* FUNCTION: acpi_ds_build_internal_package_obj
*
* PARAMETERS: walk_state - Current walk state
- * Op - Parser object to be translated
+ * op - Parser object to be translated
* element_count - Number of elements in the package - this is
* the num_elements argument to Package()
* obj_desc_ptr - Where the ACPI internal object is returned
* FUNCTION: acpi_ds_create_node
*
* PARAMETERS: walk_state - Current walk state
- * Node - NS Node to be initialized
- * Op - Parser object to be translated
+ * node - NS Node to be initialized
+ * op - Parser object to be translated
*
* RETURN: Status
*
* FUNCTION: acpi_ds_init_object_from_op
*
* PARAMETERS: walk_state - Current walk state
- * Op - Parser op used to init the internal object
- * Opcode - AML opcode associated with the object
+ * op - Parser op used to init the internal object
+ * opcode - AML opcode associated with the object
* ret_obj_desc - Namespace object to be initialized
*
* RETURN: Status
* FUNCTION: acpi_ds_eval_buffer_field_operands
*
* PARAMETERS: walk_state - Current walk
- * Op - A valid buffer_field Op object
+ * op - A valid buffer_field Op object
*
* RETURN: Status
*
* FUNCTION: acpi_ds_eval_region_operands
*
* PARAMETERS: walk_state - Current walk
- * Op - A valid region Op object
+ * op - A valid region Op object
*
* RETURN: Status
*
*/
node = op->common.node;
- /* next_op points to the op that holds the space_iD */
+ /* next_op points to the op that holds the space_ID */
next_op = op->common.value.arg;
* FUNCTION: acpi_ds_eval_table_region_operands
*
* PARAMETERS: walk_state - Current walk
- * Op - A valid region Op object
+ * op - A valid region Op object
*
* RETURN: Status
*
* FUNCTION: acpi_ds_eval_data_object_operands
*
* PARAMETERS: walk_state - Current walk
- * Op - A valid data_object Op object
+ * op - A valid data_object Op object
* obj_desc - data_object
*
* RETURN: Status
* FUNCTION: acpi_ds_eval_bank_field_operands
*
* PARAMETERS: walk_state - Current walk
- * Op - A valid bank_field Op object
+ * op - A valid bank_field Op object
*
* RETURN: Status
*
*
* FUNCTION: acpi_ds_is_result_used
*
- * PARAMETERS: Op - Current Op
+ * PARAMETERS: op - Current Op
* walk_state - Current State
*
* RETURN: TRUE if result is used, FALSE otherwise
*
* FUNCTION: acpi_ds_delete_result_if_not_used
*
- * PARAMETERS: Op - Current parse Op
+ * PARAMETERS: op - Current parse Op
* result_obj - Result of the operation
* walk_state - Current state
*
* FUNCTION: acpi_ds_create_operand
*
* PARAMETERS: walk_state - Current walk state
- * Arg - Parse object for the argument
+ * arg - Parse object for the argument
* arg_index - Which argument (zero based)
*
* RETURN: Status
*
* FUNCTION: acpi_ds_scope_stack_push
*
- * PARAMETERS: Node - Name to be made current
- * Type - Type of frame being pushed
+ * PARAMETERS: node - Name to be made current
+ * type - Type of frame being pushed
* walk_state - Current state
*
* RETURN: Status
*
* FUNCTION: acpi_ds_result_pop
*
- * PARAMETERS: Object - Where to return the popped object
+ * PARAMETERS: object - Where to return the popped object
* walk_state - Current Walk state
*
* RETURN: Status
*
* FUNCTION: acpi_ds_result_push
*
- * PARAMETERS: Object - Where to return the popped object
+ * PARAMETERS: object - Where to return the popped object
* walk_state - Current Walk state
*
* RETURN: Status
*
* FUNCTION: acpi_ds_obj_stack_push
*
- * PARAMETERS: Object - Object to push
+ * PARAMETERS: object - Object to push
* walk_state - Current Walk state
*
* RETURN: Status
*
* FUNCTION: acpi_ds_get_current_walk_state
*
- * PARAMETERS: Thread - Get current active state for this Thread
+ * PARAMETERS: thread - Get current active state for this Thread
*
* RETURN: Pointer to the current walk state
*
* FUNCTION: acpi_ds_push_walk_state
*
* PARAMETERS: walk_state - State to push
- * Thread - Thread state object
+ * thread - Thread state object
*
* RETURN: None
*
*
* FUNCTION: acpi_ds_pop_walk_state
*
- * PARAMETERS: Thread - Current thread state
+ * PARAMETERS: thread - Current thread state
*
* RETURN: A walk_state object popped from the thread's stack
*
* FUNCTION: acpi_ds_create_walk_state
*
* PARAMETERS: owner_id - ID for object creation
- * Origin - Starting point for this walk
+ * origin - Starting point for this walk
* method_desc - Method object
- * Thread - Current thread state
+ * thread - Current thread state
*
* RETURN: Pointer to the new walk state.
*
* FUNCTION: acpi_ds_init_aml_walk
*
* PARAMETERS: walk_state - New state to be initialized
- * Op - Current parse op
+ * op - Current parse op
* method_node - Control method NS node, if any
* aml_start - Start of AML
* aml_length - Length of AML
- * Info - Method info block (params, etc.)
+ * info - Method info block (params, etc.)
* pass_number - 1, 2, or 3
*
* RETURN: Status
*
* FUNCTION: acpi_ev_fixed_event_dispatch
*
- * PARAMETERS: Event - Event type
+ * PARAMETERS: event - Event type
*
* RETURN: INTERRUPT_HANDLED or INTERRUPT_NOT_HANDLED
*
*
* FUNCTION: acpi_ev_global_lock_handler
*
- * PARAMETERS: Context - From thread interface, not used
+ * PARAMETERS: context - From thread interface, not used
*
* RETURN: ACPI_INTERRUPT_HANDLED
*
*
* FUNCTION: acpi_ev_acquire_global_lock
*
- * PARAMETERS: Timeout - Max time to wait for the lock, in millisec.
+ * PARAMETERS: timeout - Max time to wait for the lock, in millisec.
*
* RETURN: Status
*
acpi_status status;
struct acpi_gpe_event_info *local_gpe_event_info;
struct acpi_evaluate_info *info;
- struct acpi_gpe_notify_object *notify_object;
+ struct acpi_gpe_notify_info *notify;
ACPI_FUNCTION_TRACE(ev_asynch_execute_gpe_method);
* completes. The notify handlers are NOT invoked synchronously
* from this thread -- because handlers may in turn run other
* control methods.
+ *
+ * June 2012: Expand implicit notify mechanism to support
+ * notifies on multiple device objects.
*/
- status = acpi_ev_queue_notify_request(
- local_gpe_event_info->dispatch.device.node,
- ACPI_NOTIFY_DEVICE_WAKE);
-
- notify_object = local_gpe_event_info->dispatch.device.next;
- while (ACPI_SUCCESS(status) && notify_object) {
- status = acpi_ev_queue_notify_request(
- notify_object->node,
- ACPI_NOTIFY_DEVICE_WAKE);
- notify_object = notify_object->next;
+ notify = local_gpe_event_info->dispatch.notify_list;
+ while (ACPI_SUCCESS(status) && notify) {
+ status =
+ acpi_ev_queue_notify_request(notify->device_node,
+ ACPI_NOTIFY_DEVICE_WAKE);
+
+ notify = notify->next;
}
break;
* FUNCTION: acpi_ev_create_gpe_block
*
* PARAMETERS: gpe_device - Handle to the parent GPE block
- * gpe_block_address - Address and space_iD
+ * gpe_block_address - Address and space_ID
* register_count - Number of GPE register pairs in the block
* gpe_block_base_number - Starting GPE number for the block
* interrupt_number - H/W interrupt for the block
* FUNCTION: acpi_ev_walk_gpe_list
*
* PARAMETERS: gpe_walk_callback - Routine called for each GPE block
- * Context - Value passed to callback
+ * context - Value passed to callback
*
* RETURN: Status
*
void *context)
{
struct acpi_gpe_event_info *gpe_event_info;
+ struct acpi_gpe_notify_info *notify;
+ struct acpi_gpe_notify_info *next;
u32 i;
u32 j;
if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
ACPI_GPE_DISPATCH_HANDLER) {
+
+ /* Delete an installed handler block */
+
ACPI_FREE(gpe_event_info->dispatch.handler);
gpe_event_info->dispatch.handler = NULL;
gpe_event_info->flags &=
~ACPI_GPE_DISPATCH_MASK;
+ } else if ((gpe_event_info->
+ flags & ACPI_GPE_DISPATCH_MASK) ==
+ ACPI_GPE_DISPATCH_NOTIFY) {
+
+ /* Delete the implicit notification device list */
+
+ notify = gpe_event_info->dispatch.notify_list;
+ while (notify) {
+ next = notify->next;
+ ACPI_FREE(notify);
+ notify = next;
+ }
+ gpe_event_info->dispatch.notify_list = NULL;
+ gpe_event_info->flags &=
+ ~ACPI_GPE_DISPATCH_MASK;
}
}
}
*
* FUNCTION: acpi_ev_is_notify_object
*
- * PARAMETERS: Node - Node to check
+ * PARAMETERS: node - Node to check
*
* RETURN: TRUE if notifies allowed on this object
*
*
* FUNCTION: acpi_ev_queue_notify_request
*
- * PARAMETERS: Node - NS node for the notified object
+ * PARAMETERS: node - NS node for the notified object
* notify_value - Value from the Notify() request
*
* RETURN: Status
u32 notify_value)
{
union acpi_operand_object *obj_desc;
- union acpi_operand_object *handler_obj = NULL;
- union acpi_generic_state *notify_info;
+ union acpi_operand_object *handler_list_head = NULL;
+ union acpi_generic_state *info;
+ u8 handler_list_id = 0;
acpi_status status = AE_OK;
ACPI_FUNCTION_NAME(ev_queue_notify_request);
- /*
- * For value 0x03 (Ejection Request), may need to run a device method.
- * For value 0x02 (Device Wake), if _PRW exists, may need to run
- * the _PS0 method.
- * For value 0x80 (Status Change) on the power button or sleep button,
- * initiate soft-off or sleep operation.
- *
- * For all cases, simply dispatch the notify to the handler.
- */
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Dispatching Notify on [%4.4s] (%s) Value 0x%2.2X (%s) Node %p\n",
- acpi_ut_get_node_name(node),
- acpi_ut_get_type_name(node->type), notify_value,
- acpi_ut_get_notify_name(notify_value), node));
+ /* Are Notifies allowed on this object? */
- /* Get the notify object attached to the NS Node */
-
- obj_desc = acpi_ns_get_attached_object(node);
- if (obj_desc) {
-
- /* We have the notify object, Get the correct handler */
-
- switch (node->type) {
+ if (!acpi_ev_is_notify_object(node)) {
+ return (AE_TYPE);
+ }
- /* Notify is allowed only on these types */
+ /* Get the correct notify list type (System or Device) */
- case ACPI_TYPE_DEVICE:
- case ACPI_TYPE_THERMAL:
- case ACPI_TYPE_PROCESSOR:
+ if (notify_value <= ACPI_MAX_SYS_NOTIFY) {
+ handler_list_id = ACPI_SYSTEM_HANDLER_LIST;
+ } else {
+ handler_list_id = ACPI_DEVICE_HANDLER_LIST;
+ }
- if (notify_value <= ACPI_MAX_SYS_NOTIFY) {
- handler_obj =
- obj_desc->common_notify.system_notify;
- } else {
- handler_obj =
- obj_desc->common_notify.device_notify;
- }
- break;
+ /* Get the notify object attached to the namespace Node */
- default:
+ obj_desc = acpi_ns_get_attached_object(node);
+ if (obj_desc) {
- /* All other types are not supported */
+ /* We have an attached object, Get the correct handler list */
- return (AE_TYPE);
- }
+ handler_list_head =
+ obj_desc->common_notify.notify_list[handler_list_id];
}
/*
- * If there is a handler to run, schedule the dispatcher.
- * Check for:
- * 1) Global system notify handler
- * 2) Global device notify handler
- * 3) Per-device notify handler
+ * If there is no notify handler (Global or Local)
+ * for this object, just ignore the notify
*/
- if ((acpi_gbl_system_notify.handler &&
- (notify_value <= ACPI_MAX_SYS_NOTIFY)) ||
- (acpi_gbl_device_notify.handler &&
- (notify_value > ACPI_MAX_SYS_NOTIFY)) || handler_obj) {
- notify_info = acpi_ut_create_generic_state();
- if (!notify_info) {
- return (AE_NO_MEMORY);
- }
+ if (!acpi_gbl_global_notify[handler_list_id].handler
+ && !handler_list_head) {
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "No notify handler for Notify, ignoring (%4.4s, %X) node %p\n",
+ acpi_ut_get_node_name(node), notify_value,
+ node));
- if (!handler_obj) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Executing system notify handler for Notify (%4.4s, %X) "
- "node %p\n",
- acpi_ut_get_node_name(node),
- notify_value, node));
- }
+ return (AE_OK);
+ }
- notify_info->common.descriptor_type =
- ACPI_DESC_TYPE_STATE_NOTIFY;
- notify_info->notify.node = node;
- notify_info->notify.value = (u16) notify_value;
- notify_info->notify.handler_obj = handler_obj;
+ /* Setup notify info and schedule the notify dispatcher */
- status =
- acpi_os_execute(OSL_NOTIFY_HANDLER, acpi_ev_notify_dispatch,
- notify_info);
- if (ACPI_FAILURE(status)) {
- acpi_ut_delete_generic_state(notify_info);
- }
- } else {
- /* There is no notify handler (per-device or system) for this device */
+ info = acpi_ut_create_generic_state();
+ if (!info) {
+ return (AE_NO_MEMORY);
+ }
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "No notify handler for Notify (%4.4s, %X) node %p\n",
- acpi_ut_get_node_name(node), notify_value,
- node));
+ info->common.descriptor_type = ACPI_DESC_TYPE_STATE_NOTIFY;
+
+ info->notify.node = node;
+ info->notify.value = (u16)notify_value;
+ info->notify.handler_list_id = handler_list_id;
+ info->notify.handler_list_head = handler_list_head;
+ info->notify.global = &acpi_gbl_global_notify[handler_list_id];
+
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Dispatching Notify on [%4.4s] (%s) Value 0x%2.2X (%s) Node %p\n",
+ acpi_ut_get_node_name(node),
+ acpi_ut_get_type_name(node->type), notify_value,
+ acpi_ut_get_notify_name(notify_value), node));
+
+ status = acpi_os_execute(OSL_NOTIFY_HANDLER, acpi_ev_notify_dispatch,
+ info);
+ if (ACPI_FAILURE(status)) {
+ acpi_ut_delete_generic_state(info);
}
return (status);
*
* FUNCTION: acpi_ev_notify_dispatch
*
- * PARAMETERS: Context - To be passed to the notify handler
+ * PARAMETERS: context - To be passed to the notify handler
*
* RETURN: None.
*
static void ACPI_SYSTEM_XFACE acpi_ev_notify_dispatch(void *context)
{
- union acpi_generic_state *notify_info =
- (union acpi_generic_state *)context;
- acpi_notify_handler global_handler = NULL;
- void *global_context = NULL;
+ union acpi_generic_state *info = (union acpi_generic_state *)context;
union acpi_operand_object *handler_obj;
ACPI_FUNCTION_ENTRY();
- /*
- * We will invoke a global notify handler if installed. This is done
- * _before_ we invoke the per-device handler attached to the device.
- */
- if (notify_info->notify.value <= ACPI_MAX_SYS_NOTIFY) {
-
- /* Global system notification handler */
-
- if (acpi_gbl_system_notify.handler) {
- global_handler = acpi_gbl_system_notify.handler;
- global_context = acpi_gbl_system_notify.context;
- }
- } else {
- /* Global driver notification handler */
-
- if (acpi_gbl_device_notify.handler) {
- global_handler = acpi_gbl_device_notify.handler;
- global_context = acpi_gbl_device_notify.context;
- }
- }
-
- /* Invoke the system handler first, if present */
+ /* Invoke a global notify handler if installed */
- if (global_handler) {
- global_handler(notify_info->notify.node,
- notify_info->notify.value, global_context);
+ if (info->notify.global->handler) {
+ info->notify.global->handler(info->notify.node,
+ info->notify.value,
+ info->notify.global->context);
}
- /* Now invoke the per-device handler, if present */
+ /* Now invoke the local notify handler(s) if any are installed */
- handler_obj = notify_info->notify.handler_obj;
- if (handler_obj) {
- struct acpi_object_notify_handler *notifier;
+ handler_obj = info->notify.handler_list_head;
+ while (handler_obj) {
+ handler_obj->notify.handler(info->notify.node,
+ info->notify.value,
+ handler_obj->notify.context);
- notifier = &handler_obj->notify;
- while (notifier) {
- notifier->handler(notify_info->notify.node,
- notify_info->notify.value,
- notifier->context);
- notifier = notifier->next;
- }
+ handler_obj =
+ handler_obj->notify.next[info->notify.handler_list_id];
}
/* All done with the info object */
- acpi_ut_delete_generic_state(notify_info);
+ acpi_ut_delete_generic_state(info);
}
#if (!ACPI_REDUCED_HARDWARE)
*
* FUNCTION: acpi_ev_has_default_handler
*
- * PARAMETERS: Node - Namespace node for the device
+ * PARAMETERS: node - Namespace node for the device
* space_id - The address space ID
*
* RETURN: TRUE if default handler is installed, FALSE otherwise
* FUNCTION: acpi_ev_execute_reg_method
*
* PARAMETERS: region_obj - Region object
- * Function - Passed to _REG: On (1) or Off (0)
+ * function - Passed to _REG: On (1) or Off (0)
*
* RETURN: Status
*
/*
* The _REG method has two arguments:
*
- * Arg0 - Integer:
+ * arg0 - Integer:
* Operation region space ID Same value as region_obj->Region.space_id
*
- * Arg1 - Integer:
+ * arg1 - Integer:
* connection status 1 for connecting the handler, 0 for disconnecting
* the handler (Passed as a parameter)
*/
*
* PARAMETERS: region_obj - Internal region object
* field_obj - Corresponding field. Can be NULL.
- * Function - Read or Write operation
+ * function - Read or Write operation
* region_offset - Where in the region to read or write
* bit_width - Field width in bits (8, 16, 32, or 64)
- * Value - Pointer to in or out value, must be
+ * value - Pointer to in or out value, must be
* a full 64-bit integer
*
* RETURN: Status
*
* FUNCTION: acpi_ev_install_space_handler
*
- * PARAMETERS: Node - Namespace node for the device
+ * PARAMETERS: node - Namespace node for the device
* space_id - The address space ID
- * Handler - Address of the handler
- * Setup - Address of the setup function
- * Context - Value passed to the handler on each access
+ * handler - Address of the handler
+ * setup - Address of the setup function
+ * context - Value passed to the handler on each access
*
* RETURN: Status
*
*
* FUNCTION: acpi_ev_execute_reg_methods
*
- * PARAMETERS: Node - Namespace node for the device
+ * PARAMETERS: node - Namespace node for the device
* space_id - The address space ID
*
* RETURN: Status
*
* PARAMETERS: walk_namespace callback
*
- * DESCRIPTION: Run _REG method for region objects of the requested space_iD
+ * DESCRIPTION: Run _REG method for region objects of the requested spaceID
*
******************************************************************************/
*
* FUNCTION: acpi_ev_system_memory_region_setup
*
- * PARAMETERS: Handle - Region we are interested in
- * Function - Start or stop
+ * PARAMETERS: handle - Region we are interested in
+ * function - Start or stop
* handler_context - Address space handler context
* region_context - Region specific context
*
*
* FUNCTION: acpi_ev_io_space_region_setup
*
- * PARAMETERS: Handle - Region we are interested in
- * Function - Start or stop
+ * PARAMETERS: handle - Region we are interested in
+ * function - Start or stop
* handler_context - Address space handler context
* region_context - Region specific context
*
*
* FUNCTION: acpi_ev_pci_config_region_setup
*
- * PARAMETERS: Handle - Region we are interested in
- * Function - Start or stop
+ * PARAMETERS: handle - Region we are interested in
+ * function - Start or stop
* handler_context - Address space handler context
* region_context - Region specific context
*
*
* FUNCTION: acpi_ev_is_pci_root_bridge
*
- * PARAMETERS: Node - Device node being examined
+ * PARAMETERS: node - Device node being examined
*
* RETURN: TRUE if device is a PCI/PCI-Express Root Bridge
*
*
* FUNCTION: acpi_ev_pci_bar_region_setup
*
- * PARAMETERS: Handle - Region we are interested in
- * Function - Start or stop
+ * PARAMETERS: handle - Region we are interested in
+ * function - Start or stop
* handler_context - Address space handler context
* region_context - Region specific context
*
* RETURN: Status
*
- * DESCRIPTION: Setup a pci_bAR operation region
+ * DESCRIPTION: Setup a pci_BAR operation region
*
* MUTEX: Assumes namespace is not locked
*
*
* FUNCTION: acpi_ev_cmos_region_setup
*
- * PARAMETERS: Handle - Region we are interested in
- * Function - Start or stop
+ * PARAMETERS: handle - Region we are interested in
+ * function - Start or stop
* handler_context - Address space handler context
* region_context - Region specific context
*
*
* FUNCTION: acpi_ev_default_region_setup
*
- * PARAMETERS: Handle - Region we are interested in
- * Function - Start or stop
+ * PARAMETERS: handle - Region we are interested in
+ * function - Start or stop
* handler_context - Address space handler context
* region_context - Region specific context
*
*
* FUNCTION: acpi_ev_sci_xrupt_handler
*
- * PARAMETERS: Context - Calling Context
+ * PARAMETERS: context - Calling Context
*
* RETURN: Status code indicates whether interrupt was handled.
*
*
* FUNCTION: acpi_ev_gpe_xrupt_handler
*
- * PARAMETERS: Context - Calling Context
+ * PARAMETERS: context - Calling Context
*
* RETURN: Status code indicates whether interrupt was handled.
*
ACPI_MODULE_NAME("evxface")
-/*******************************************************************************
- *
- * FUNCTION: acpi_populate_handler_object
- *
- * PARAMETERS: handler_obj - Handler object to populate
- * handler_type - The type of handler:
- * ACPI_SYSTEM_NOTIFY: system_handler (00-7f)
- * ACPI_DEVICE_NOTIFY: driver_handler (80-ff)
- * ACPI_ALL_NOTIFY: both system and device
- * handler - Address of the handler
- * context - Value passed to the handler on each GPE
- * next - Address of a handler object to link to
- *
- * RETURN: None
- *
- * DESCRIPTION: Populate a handler object.
- *
- ******************************************************************************/
-static void
-acpi_populate_handler_object(struct acpi_object_notify_handler *handler_obj,
- u32 handler_type,
- acpi_notify_handler handler, void *context,
- struct acpi_object_notify_handler *next)
-{
- handler_obj->handler_type = handler_type;
- handler_obj->handler = handler;
- handler_obj->context = context;
- handler_obj->next = next;
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_add_handler_object
- *
- * PARAMETERS: parent_obj - Parent of the new object
- * handler - Address of the handler
- * context - Value passed to the handler on each GPE
- *
- * RETURN: Status
- *
- * DESCRIPTION: Create a new handler object and populate it.
- *
- ******************************************************************************/
-static acpi_status
-acpi_add_handler_object(struct acpi_object_notify_handler *parent_obj,
- acpi_notify_handler handler, void *context)
-{
- struct acpi_object_notify_handler *handler_obj;
-
- /* The parent must not be a defice notify handler object. */
- if (parent_obj->handler_type & ACPI_DEVICE_NOTIFY)
- return AE_BAD_PARAMETER;
-
- handler_obj = ACPI_ALLOCATE_ZEROED(sizeof(*handler_obj));
- if (!handler_obj)
- return AE_NO_MEMORY;
-
- acpi_populate_handler_object(handler_obj,
- ACPI_SYSTEM_NOTIFY,
- handler, context,
- parent_obj->next);
- parent_obj->next = handler_obj;
-
- return AE_OK;
-}
-
-
/*******************************************************************************
*
* FUNCTION: acpi_install_notify_handler
*
* PARAMETERS: Device - The device for which notifies will be handled
* handler_type - The type of handler:
- * ACPI_SYSTEM_NOTIFY: system_handler (00-7f)
- * ACPI_DEVICE_NOTIFY: driver_handler (80-ff)
- * ACPI_ALL_NOTIFY: both system and device
+ * ACPI_SYSTEM_NOTIFY: System Handler (00-7F)
+ * ACPI_DEVICE_NOTIFY: Device Handler (80-FF)
+ * ACPI_ALL_NOTIFY: Both System and Device
* Handler - Address of the handler
* Context - Value passed to the handler on each GPE
*
* RETURN: Status
*
- * DESCRIPTION: Install a handler for notifies on an ACPI device
+ * DESCRIPTION: Install a handler for notifications on an ACPI Device,
+ * thermal_zone, or Processor object.
+ *
+ * NOTES: The Root namespace object may have only one handler for each
+ * type of notify (System/Device). Device/Thermal/Processor objects
+ * may have one device notify handler, and multiple system notify
+ * handlers.
*
******************************************************************************/
acpi_status
u32 handler_type,
acpi_notify_handler handler, void *context)
{
+ struct acpi_namespace_node *node =
+ ACPI_CAST_PTR(struct acpi_namespace_node, device);
union acpi_operand_object *obj_desc;
- union acpi_operand_object *notify_obj;
- struct acpi_namespace_node *node;
+ union acpi_operand_object *handler_obj;
acpi_status status;
+ u32 i;
ACPI_FUNCTION_TRACE(acpi_install_notify_handler);
/* Parameter validation */
- if ((!device) ||
- (!handler) || (handler_type > ACPI_MAX_NOTIFY_HANDLER_TYPE)) {
+ if ((!device) || (!handler) || (!handler_type) ||
+ (handler_type > ACPI_MAX_NOTIFY_HANDLER_TYPE)) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
return_ACPI_STATUS(status);
}
- /* Convert and validate the device handle */
-
- node = acpi_ns_validate_handle(device);
- if (!node) {
- status = AE_BAD_PARAMETER;
- goto unlock_and_exit;
- }
-
/*
* Root Object:
* Registering a notify handler on the root object indicates that the
* caller wishes to receive notifications for all objects. Note that
- * only one <external> global handler can be regsitered (per notify type).
+ * only one global handler can be registered per notify type.
+ * Ensure that a handler is not already installed.
*/
if (device == ACPI_ROOT_OBJECT) {
+ for (i = 0; i < ACPI_NUM_NOTIFY_TYPES; i++) {
+ if (handler_type & (i + 1)) {
+ if (acpi_gbl_global_notify[i].handler) {
+ status = AE_ALREADY_EXISTS;
+ goto unlock_and_exit;
+ }
- /* Make sure the handler is not already installed */
-
- if (((handler_type & ACPI_SYSTEM_NOTIFY) &&
- acpi_gbl_system_notify.handler) ||
- ((handler_type & ACPI_DEVICE_NOTIFY) &&
- acpi_gbl_device_notify.handler)) {
- status = AE_ALREADY_EXISTS;
- goto unlock_and_exit;
- }
-
- if (handler_type & ACPI_SYSTEM_NOTIFY) {
- acpi_gbl_system_notify.node = node;
- acpi_gbl_system_notify.handler = handler;
- acpi_gbl_system_notify.context = context;
- }
-
- if (handler_type & ACPI_DEVICE_NOTIFY) {
- acpi_gbl_device_notify.node = node;
- acpi_gbl_device_notify.handler = handler;
- acpi_gbl_device_notify.context = context;
+ acpi_gbl_global_notify[i].handler = handler;
+ acpi_gbl_global_notify[i].context = context;
+ }
}
- /* Global notify handler installed */
+ goto unlock_and_exit; /* Global notify handler installed, all done */
}
/*
* All Other Objects:
- * Caller will only receive notifications specific to the target object.
- * Note that only certain object types can receive notifications.
+ * Caller will only receive notifications specific to the target
+ * object. Note that only certain object types are allowed to
+ * receive notifications.
*/
- else {
- /* Notifies allowed on this object? */
- if (!acpi_ev_is_notify_object(node)) {
- status = AE_TYPE;
- goto unlock_and_exit;
- }
+ /* Are Notifies allowed on this object? */
- /* Check for an existing internal object */
+ if (!acpi_ev_is_notify_object(node)) {
+ status = AE_TYPE;
+ goto unlock_and_exit;
+ }
- obj_desc = acpi_ns_get_attached_object(node);
- if (obj_desc) {
+ /* Check for an existing internal object, might not exist */
- /* Object exists. */
+ obj_desc = acpi_ns_get_attached_object(node);
+ if (!obj_desc) {
- /* For a device notify, make sure there's no handler. */
- if ((handler_type & ACPI_DEVICE_NOTIFY) &&
- obj_desc->common_notify.device_notify) {
- status = AE_ALREADY_EXISTS;
- goto unlock_and_exit;
- }
+ /* Create a new object */
- /* System notifies may have more handlers installed. */
- notify_obj = obj_desc->common_notify.system_notify;
+ obj_desc = acpi_ut_create_internal_object(node->type);
+ if (!obj_desc) {
+ status = AE_NO_MEMORY;
+ goto unlock_and_exit;
+ }
- if ((handler_type & ACPI_SYSTEM_NOTIFY) && notify_obj) {
- struct acpi_object_notify_handler *parent_obj;
+ /* Attach new object to the Node, remove local reference */
+
+ status = acpi_ns_attach_object(device, obj_desc, node->type);
+ acpi_ut_remove_reference(obj_desc);
+ if (ACPI_FAILURE(status)) {
+ goto unlock_and_exit;
+ }
+ }
- if (handler_type & ACPI_DEVICE_NOTIFY) {
+ /* Ensure that the handler is not already installed in the lists */
+
+ for (i = 0; i < ACPI_NUM_NOTIFY_TYPES; i++) {
+ if (handler_type & (i + 1)) {
+ handler_obj = obj_desc->common_notify.notify_list[i];
+ while (handler_obj) {
+ if (handler_obj->notify.handler == handler) {
status = AE_ALREADY_EXISTS;
goto unlock_and_exit;
}
- parent_obj = ¬ify_obj->notify;
- status = acpi_add_handler_object(parent_obj,
- handler,
- context);
- goto unlock_and_exit;
- }
- } else {
- /* Create a new object */
-
- obj_desc = acpi_ut_create_internal_object(node->type);
- if (!obj_desc) {
- status = AE_NO_MEMORY;
- goto unlock_and_exit;
- }
-
- /* Attach new object to the Node */
-
- status =
- acpi_ns_attach_object(device, obj_desc, node->type);
-
- /* Remove local reference to the object */
-
- acpi_ut_remove_reference(obj_desc);
- if (ACPI_FAILURE(status)) {
- goto unlock_and_exit;
+ handler_obj = handler_obj->notify.next[i];
}
}
+ }
- /* Install the handler */
+ /* Create and populate a new notify handler object */
- notify_obj =
- acpi_ut_create_internal_object(ACPI_TYPE_LOCAL_NOTIFY);
- if (!notify_obj) {
- status = AE_NO_MEMORY;
- goto unlock_and_exit;
- }
+ handler_obj = acpi_ut_create_internal_object(ACPI_TYPE_LOCAL_NOTIFY);
+ if (!handler_obj) {
+ status = AE_NO_MEMORY;
+ goto unlock_and_exit;
+ }
- acpi_populate_handler_object(¬ify_obj->notify,
- handler_type,
- handler, context,
- NULL);
+ handler_obj->notify.node = node;
+ handler_obj->notify.handler_type = handler_type;
+ handler_obj->notify.handler = handler;
+ handler_obj->notify.context = context;
- if (handler_type & ACPI_SYSTEM_NOTIFY) {
- obj_desc->common_notify.system_notify = notify_obj;
- }
+ /* Install the handler at the list head(s) */
- if (handler_type & ACPI_DEVICE_NOTIFY) {
- obj_desc->common_notify.device_notify = notify_obj;
- }
+ for (i = 0; i < ACPI_NUM_NOTIFY_TYPES; i++) {
+ if (handler_type & (i + 1)) {
+ handler_obj->notify.next[i] =
+ obj_desc->common_notify.notify_list[i];
- if (handler_type == ACPI_ALL_NOTIFY) {
+ obj_desc->common_notify.notify_list[i] = handler_obj;
+ }
+ }
- /* Extra ref if installed in both */
+ /* Add an extra reference if handler was installed in both lists */
- acpi_ut_add_reference(notify_obj);
- }
+ if (handler_type == ACPI_ALL_NOTIFY) {
+ acpi_ut_add_reference(handler_obj);
}
- unlock_and_exit:
+unlock_and_exit:
(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
return_ACPI_STATUS(status);
}
*
* FUNCTION: acpi_remove_notify_handler
*
- * PARAMETERS: Device - The device for which notifies will be handled
+ * PARAMETERS: Device - The device for which the handler is installed
* handler_type - The type of handler:
- * ACPI_SYSTEM_NOTIFY: system_handler (00-7f)
- * ACPI_DEVICE_NOTIFY: driver_handler (80-ff)
- * ACPI_ALL_NOTIFY: both system and device
+ * ACPI_SYSTEM_NOTIFY: System Handler (00-7F)
+ * ACPI_DEVICE_NOTIFY: Device Handler (80-FF)
+ * ACPI_ALL_NOTIFY: Both System and Device
* Handler - Address of the handler
*
* RETURN: Status
acpi_remove_notify_handler(acpi_handle device,
u32 handler_type, acpi_notify_handler handler)
{
- union acpi_operand_object *notify_obj;
+ struct acpi_namespace_node *node =
+ ACPI_CAST_PTR(struct acpi_namespace_node, device);
union acpi_operand_object *obj_desc;
- struct acpi_namespace_node *node;
+ union acpi_operand_object *handler_obj;
+ union acpi_operand_object *previous_handler_obj;
acpi_status status;
+ u32 i;
ACPI_FUNCTION_TRACE(acpi_remove_notify_handler);
/* Parameter validation */
- if ((!device) ||
- (!handler) || (handler_type > ACPI_MAX_NOTIFY_HANDLER_TYPE)) {
- status = AE_BAD_PARAMETER;
- goto exit;
+ if ((!device) || (!handler) || (!handler_type) ||
+ (handler_type > ACPI_MAX_NOTIFY_HANDLER_TYPE)) {
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
}
-
-
/* Make sure all deferred tasks are completed */
- acpi_os_wait_events_complete(NULL);
+
+ acpi_os_wait_events_complete();
status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE(status)) {
- goto exit;
- }
-
- /* Convert and validate the device handle */
-
- node = acpi_ns_validate_handle(device);
- if (!node) {
- status = AE_BAD_PARAMETER;
- goto unlock_and_exit;
+ return_ACPI_STATUS(status);
}
- /* Root Object */
+ /* Root Object. Global handlers are removed here */
if (device == ACPI_ROOT_OBJECT) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Removing notify handler for namespace root object\n"));
+ for (i = 0; i < ACPI_NUM_NOTIFY_TYPES; i++) {
+ if (handler_type & (i + 1)) {
+ if (!acpi_gbl_global_notify[i].handler ||
+ (acpi_gbl_global_notify[i].handler !=
+ handler)) {
+ status = AE_NOT_EXIST;
+ goto unlock_and_exit;
+ }
- if (((handler_type & ACPI_SYSTEM_NOTIFY) &&
- !acpi_gbl_system_notify.handler) ||
- ((handler_type & ACPI_DEVICE_NOTIFY) &&
- !acpi_gbl_device_notify.handler)) {
- status = AE_NOT_EXIST;
- goto unlock_and_exit;
- }
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Removing global notify handler\n"));
- if (handler_type & ACPI_SYSTEM_NOTIFY) {
- acpi_gbl_system_notify.node = NULL;
- acpi_gbl_system_notify.handler = NULL;
- acpi_gbl_system_notify.context = NULL;
+ acpi_gbl_global_notify[i].handler = NULL;
+ acpi_gbl_global_notify[i].context = NULL;
+ }
}
- if (handler_type & ACPI_DEVICE_NOTIFY) {
- acpi_gbl_device_notify.node = NULL;
- acpi_gbl_device_notify.handler = NULL;
- acpi_gbl_device_notify.context = NULL;
- }
+ goto unlock_and_exit;
}
- /* All Other Objects */
+ /* All other objects: Are Notifies allowed on this object? */
- else {
- /* Notifies allowed on this object? */
+ if (!acpi_ev_is_notify_object(node)) {
+ status = AE_TYPE;
+ goto unlock_and_exit;
+ }
- if (!acpi_ev_is_notify_object(node)) {
- status = AE_TYPE;
- goto unlock_and_exit;
- }
+ /* Must have an existing internal object */
- /* Check for an existing internal object */
+ obj_desc = acpi_ns_get_attached_object(node);
+ if (!obj_desc) {
+ status = AE_NOT_EXIST;
+ goto unlock_and_exit;
+ }
- obj_desc = acpi_ns_get_attached_object(node);
- if (!obj_desc) {
- status = AE_NOT_EXIST;
- goto unlock_and_exit;
- }
+ /* Internal object exists. Find the handler and remove it */
- /* Object exists - make sure there's an existing handler */
+ for (i = 0; i < ACPI_NUM_NOTIFY_TYPES; i++) {
+ if (handler_type & (i + 1)) {
+ handler_obj = obj_desc->common_notify.notify_list[i];
+ previous_handler_obj = NULL;
- if (handler_type & ACPI_SYSTEM_NOTIFY) {
- struct acpi_object_notify_handler *handler_obj;
- struct acpi_object_notify_handler *parent_obj;
+ /* Attempt to find the handler in the handler list */
- notify_obj = obj_desc->common_notify.system_notify;
- if (!notify_obj) {
- status = AE_NOT_EXIST;
- goto unlock_and_exit;
- }
-
- handler_obj = ¬ify_obj->notify;
- parent_obj = NULL;
- while (handler_obj->handler != handler) {
- if (handler_obj->next) {
- parent_obj = handler_obj;
- handler_obj = handler_obj->next;
- } else {
- break;
- }
+ while (handler_obj &&
+ (handler_obj->notify.handler != handler)) {
+ previous_handler_obj = handler_obj;
+ handler_obj = handler_obj->notify.next[i];
}
- if (handler_obj->handler != handler) {
- status = AE_BAD_PARAMETER;
+ if (!handler_obj) {
+ status = AE_NOT_EXIST;
goto unlock_and_exit;
}
- /*
- * Remove the handler. There are three possible cases.
- * First, we may need to remove a non-embedded object.
- * Second, we may need to remove the embedded object's
- * handler data, while non-embedded objects exist.
- * Finally, we may need to remove the embedded object
- * entirely along with its container.
- */
- if (parent_obj) {
- /* Non-embedded object is being removed. */
- parent_obj->next = handler_obj->next;
- ACPI_FREE(handler_obj);
- } else if (notify_obj->notify.next) {
- /*
- * The handler matches the embedded object, but
- * there are more handler objects in the list.
- * Replace the embedded object's data with the
- * first next object's data and remove that
- * object.
- */
- parent_obj = ¬ify_obj->notify;
- handler_obj = notify_obj->notify.next;
- *parent_obj = *handler_obj;
- ACPI_FREE(handler_obj);
- } else {
- /* No more handler objects in the list. */
- obj_desc->common_notify.system_notify = NULL;
- acpi_ut_remove_reference(notify_obj);
- }
- }
+ /* Remove the handler object from the list */
- if (handler_type & ACPI_DEVICE_NOTIFY) {
- notify_obj = obj_desc->common_notify.device_notify;
- if (!notify_obj) {
- status = AE_NOT_EXIST;
- goto unlock_and_exit;
- }
+ if (previous_handler_obj) { /* Handler is not at the list head */
+ previous_handler_obj->notify.next[i] =
+ handler_obj->notify.next[i];
+ } else { /* Handler is at the list head */
- if (notify_obj->notify.handler != handler) {
- status = AE_BAD_PARAMETER;
- goto unlock_and_exit;
+ obj_desc->common_notify.notify_list[i] =
+ handler_obj->notify.next[i];
}
- /* Remove the handler */
- obj_desc->common_notify.device_notify = NULL;
- acpi_ut_remove_reference(notify_obj);
+ acpi_ut_remove_reference(handler_obj);
}
}
- unlock_and_exit:
+unlock_and_exit:
(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
- exit:
- if (ACPI_FAILURE(status))
- ACPI_EXCEPTION((AE_INFO, status, "Removing notify handler"));
return_ACPI_STATUS(status);
}
*
* FUNCTION: acpi_install_exception_handler
*
- * PARAMETERS: Handler - Pointer to the handler function for the
+ * PARAMETERS: handler - Pointer to the handler function for the
* event
*
* RETURN: Status
*
* FUNCTION: acpi_install_global_event_handler
*
- * PARAMETERS: Handler - Pointer to the global event handler function
- * Context - Value passed to the handler on each event
+ * PARAMETERS: handler - Pointer to the global event handler function
+ * context - Value passed to the handler on each event
*
* RETURN: Status
*
*
* FUNCTION: acpi_install_fixed_event_handler
*
- * PARAMETERS: Event - Event type to enable.
- * Handler - Pointer to the handler function for the
+ * PARAMETERS: event - Event type to enable.
+ * handler - Pointer to the handler function for the
* event
- * Context - Value passed to the handler on each GPE
+ * context - Value passed to the handler on each GPE
*
* RETURN: Status
*
*
* FUNCTION: acpi_remove_fixed_event_handler
*
- * PARAMETERS: Event - Event type to disable.
- * Handler - Address of the handler
+ * PARAMETERS: event - Event type to disable.
+ * handler - Address of the handler
*
* RETURN: Status
*
* PARAMETERS: gpe_device - Namespace node for the GPE (NULL for FADT
* defined GPEs)
* gpe_number - The GPE number within the GPE block
- * Type - Whether this GPE should be treated as an
+ * type - Whether this GPE should be treated as an
* edge- or level-triggered interrupt.
- * Address - Address of the handler
- * Context - Value passed to the handler on each GPE
+ * address - Address of the handler
+ * context - Value passed to the handler on each GPE
*
* RETURN: Status
*
* PARAMETERS: gpe_device - Namespace node for the GPE (NULL for FADT
* defined GPEs)
* gpe_number - The event to remove a handler
- * Address - Address of the handler
+ * address - Address of the handler
*
* RETURN: Status
*
/* Make sure all deferred tasks are completed */
- acpi_os_wait_events_complete(NULL);
+ acpi_os_wait_events_complete();
status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
if (ACPI_FAILURE(status)) {
*
* FUNCTION: acpi_acquire_global_lock
*
- * PARAMETERS: Timeout - How long the caller is willing to wait
- * Handle - Where the handle to the lock is returned
+ * PARAMETERS: timeout - How long the caller is willing to wait
+ * handle - Where the handle to the lock is returned
* (if acquired)
*
* RETURN: Status
*
* FUNCTION: acpi_release_global_lock
*
- * PARAMETERS: Handle - Returned from acpi_acquire_global_lock
+ * PARAMETERS: handle - Returned from acpi_acquire_global_lock
*
* RETURN: Status
*
*
* FUNCTION: acpi_enable_event
*
- * PARAMETERS: Event - The fixed eventto be enabled
- * Flags - Reserved
+ * PARAMETERS: event - The fixed eventto be enabled
+ * flags - Reserved
*
* RETURN: Status
*
*
* FUNCTION: acpi_clear_event
*
- * PARAMETERS: Event - The fixed event to be cleared
+ * PARAMETERS: event - The fixed event to be cleared
*
* RETURN: Status
*
*
* FUNCTION: acpi_get_event_status
*
- * PARAMETERS: Event - The fixed event
+ * PARAMETERS: event - The fixed event
* event_status - Where the current status of the event will
* be returned
*
acpi_setup_gpe_for_wake(acpi_handle wake_device,
acpi_handle gpe_device, u32 gpe_number)
{
- acpi_status status = AE_BAD_PARAMETER;
+ acpi_status status;
struct acpi_gpe_event_info *gpe_event_info;
struct acpi_namespace_node *device_node;
- struct acpi_gpe_notify_object *notify_object;
+ struct acpi_gpe_notify_info *notify;
+ struct acpi_gpe_notify_info *new_notify;
acpi_cpu_flags flags;
- u8 gpe_dispatch_mask;
ACPI_FUNCTION_TRACE(acpi_setup_gpe_for_wake);
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
+ /* Handle root object case */
+
+ if (wake_device == ACPI_ROOT_OBJECT) {
+ device_node = acpi_gbl_root_node;
+ } else {
+ device_node = ACPI_CAST_PTR(struct acpi_namespace_node, wake_device);
+ }
+
+ /* Validate WakeDevice is of type Device */
+
+ if (device_node->type != ACPI_TYPE_DEVICE) {
+ return_ACPI_STATUS (AE_BAD_PARAMETER);
+ }
+
+ /*
+ * Allocate a new notify object up front, in case it is needed.
+ * Memory allocation while holding a spinlock is a big no-no
+ * on some hosts.
+ */
+ new_notify = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_gpe_notify_info));
+ if (!new_notify) {
+ return_ACPI_STATUS(AE_NO_MEMORY);
+ }
+
flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
/* Ensure that we have a valid GPE number */
gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
if (!gpe_event_info) {
+ status = AE_BAD_PARAMETER;
goto unlock_and_exit;
}
- if (wake_device == ACPI_ROOT_OBJECT) {
- goto out;
- }
-
/*
* If there is no method or handler for this GPE, then the
- * wake_device will be notified whenever this GPE fires (aka
- * "implicit notify") Note: The GPE is assumed to be
+ * wake_device will be notified whenever this GPE fires. This is
+ * known as an "implicit notify". Note: The GPE is assumed to be
* level-triggered (for windows compatibility).
*/
- gpe_dispatch_mask = gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK;
- if (gpe_dispatch_mask != ACPI_GPE_DISPATCH_NONE
- && gpe_dispatch_mask != ACPI_GPE_DISPATCH_NOTIFY) {
- goto out;
- }
-
- /* Validate wake_device is of type Device */
-
- device_node = ACPI_CAST_PTR(struct acpi_namespace_node, wake_device);
- if (device_node->type != ACPI_TYPE_DEVICE) {
- goto unlock_and_exit;
+ if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
+ ACPI_GPE_DISPATCH_NONE) {
+ /*
+ * This is the first device for implicit notify on this GPE.
+ * Just set the flags here, and enter the NOTIFY block below.
+ */
+ gpe_event_info->flags =
+ (ACPI_GPE_DISPATCH_NOTIFY | ACPI_GPE_LEVEL_TRIGGERED);
}
- if (gpe_dispatch_mask == ACPI_GPE_DISPATCH_NONE) {
- gpe_event_info->flags = (ACPI_GPE_DISPATCH_NOTIFY |
- ACPI_GPE_LEVEL_TRIGGERED);
- gpe_event_info->dispatch.device.node = device_node;
- gpe_event_info->dispatch.device.next = NULL;
- } else {
- /* There are multiple devices to notify implicitly. */
-
- notify_object = ACPI_ALLOCATE_ZEROED(sizeof(*notify_object));
- if (!notify_object) {
- status = AE_NO_MEMORY;
- goto unlock_and_exit;
+ /*
+ * If we already have an implicit notify on this GPE, add
+ * this device to the notify list.
+ */
+ if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
+ ACPI_GPE_DISPATCH_NOTIFY) {
+
+ /* Ensure that the device is not already in the list */
+
+ notify = gpe_event_info->dispatch.notify_list;
+ while (notify) {
+ if (notify->device_node == device_node) {
+ status = AE_ALREADY_EXISTS;
+ goto unlock_and_exit;
+ }
+ notify = notify->next;
}
- notify_object->node = device_node;
- notify_object->next = gpe_event_info->dispatch.device.next;
- gpe_event_info->dispatch.device.next = notify_object;
+ /* Add this device to the notify list for this GPE */
+
+ new_notify->device_node = device_node;
+ new_notify->next = gpe_event_info->dispatch.notify_list;
+ gpe_event_info->dispatch.notify_list = new_notify;
+ new_notify = NULL;
}
- out:
+ /* Mark the GPE as a possible wake event */
+
gpe_event_info->flags |= ACPI_GPE_CAN_WAKE;
status = AE_OK;
- unlock_and_exit:
+unlock_and_exit:
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
+
+ /* Delete the notify object if it was not used above */
+
+ if (new_notify) {
+ ACPI_FREE(new_notify);
+ }
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_setup_gpe_for_wake)
*
* PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1
* gpe_number - GPE level within the GPE block
- * Action - Enable or Disable
+ * action - Enable or Disable
*
* RETURN: Status
*
* FUNCTION: acpi_install_gpe_block
*
* PARAMETERS: gpe_device - Handle to the parent GPE Block Device
- * gpe_block_address - Address and space_iD
+ * gpe_block_address - Address and space_ID
* register_count - Number of GPE register pairs in the block
* interrupt_number - H/W interrupt for the block
*
*
* FUNCTION: acpi_get_gpe_device
*
- * PARAMETERS: Index - System GPE index (0-current_gpe_count)
+ * PARAMETERS: index - System GPE index (0-current_gpe_count)
* gpe_device - Where the parent GPE Device is returned
*
* RETURN: Status
*
* FUNCTION: acpi_install_address_space_handler
*
- * PARAMETERS: Device - Handle for the device
+ * PARAMETERS: device - Handle for the device
* space_id - The address space ID
- * Handler - Address of the handler
- * Setup - Address of the setup function
- * Context - Value passed to the handler on each access
+ * handler - Address of the handler
+ * setup - Address of the setup function
+ * context - Value passed to the handler on each access
*
* RETURN: Status
*
}
/*
- * For the default space_iDs, (the IDs for which there are default region handlers
+ * For the default space_IDs, (the IDs for which there are default region handlers
* installed) Only execute the _REG methods if the global initialization _REG
* methods have already been run (via acpi_initialize_objects). In other words,
- * we will defer the execution of the _REG methods for these space_iDs until
+ * we will defer the execution of the _REG methods for these space_IDs until
* execution of acpi_initialize_objects. This is done because we need the handlers
* for the default spaces (mem/io/pci/table) to be installed before we can run
* any control methods (or _REG methods). There is known BIOS code that depends
* on this.
*
- * For all other space_iDs, we can safely execute the _REG methods immediately.
+ * For all other space_IDs, we can safely execute the _REG methods immediately.
* This means that for IDs like embedded_controller, this function should be called
* only after acpi_enable_subsystem has been called.
*/
*
* FUNCTION: acpi_remove_address_space_handler
*
- * PARAMETERS: Device - Handle for the device
+ * PARAMETERS: device - Handle for the device
* space_id - The address space ID
- * Handler - Address of the handler
+ * handler - Address of the handler
*
* RETURN: Status
*
*
* FUNCTION: acpi_ex_add_table
*
- * PARAMETERS: Table - Pointer to raw table
+ * PARAMETERS: table - Pointer to raw table
* parent_node - Where to load the table (scope)
* ddb_handle - Where to return the table handle.
*
* FUNCTION: acpi_ex_region_read
*
* PARAMETERS: obj_desc - Region descriptor
- * Length - Number of bytes to read
- * Buffer - Pointer to where to put the data
+ * length - Number of bytes to read
+ * buffer - Pointer to where to put the data
*
* RETURN: Status
*
*
* PARAMETERS: obj_desc - Region or Buffer/Field where the table will be
* obtained
- * Target - Where a handle to the table will be stored
+ * target - Where a handle to the table will be stored
* walk_state - Current state
*
* RETURN: Status
* PARAMETERS: obj_desc - Object to be converted. Must be an
* Integer, Buffer, or String
* result_desc - Where the new Integer object is returned
- * Flags - Used for string conversion
+ * flags - Used for string conversion
*
* RETURN: Status
*
*
* FUNCTION: acpi_ex_convert_to_ascii
*
- * PARAMETERS: Integer - Value to be converted
- * Base - ACPI_STRING_DECIMAL or ACPI_STRING_HEX
- * String - Where the string is returned
+ * PARAMETERS: integer - Value to be converted
+ * base - ACPI_STRING_DECIMAL or ACPI_STRING_HEX
+ * string - Where the string is returned
* data_width - Size of data item to be converted, in bytes
*
* RETURN: Actual string length
* PARAMETERS: obj_desc - Object to be converted. Must be an
* Integer, Buffer, or String
* result_desc - Where the string object is returned
- * Type - String flags (base and conversion type)
+ * type - String flags (base and conversion type)
*
* RETURN: Status
*
*
* DESCRIPTION: Create a new processor object and populate the fields
*
- * Processor (Name[0], cpu_iD[1], pblock_addr[2], pblock_length[3])
+ * Processor (Name[0], cpu_ID[1], pblock_addr[2], pblock_length[3])
*
******************************************************************************/
* FUNCTION: acpi_ex_do_debug_object
*
* PARAMETERS: source_desc - Object to be output to "Debug Object"
- * Level - Indentation level (used for packages)
- * Index - Current package element, zero if not pkg
+ * level - Indentation level (used for packages)
+ * index - Current package element, zero if not pkg
*
* RETURN: None
*
static struct acpi_exdump_info acpi_ex_dump_device[4] = {
{ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_device), NULL},
{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(device.handler), "Handler"},
- {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(device.system_notify),
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(device.notify_list[0]),
"System Notify"},
- {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(device.device_notify),
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(device.notify_list[1]),
"Device Notify"}
};
"System Level"},
{ACPI_EXD_UINT32, ACPI_EXD_OFFSET(power_resource.resource_order),
"Resource Order"},
- {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(power_resource.system_notify),
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(power_resource.notify_list[0]),
"System Notify"},
- {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(power_resource.device_notify),
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(power_resource.notify_list[1]),
"Device Notify"}
};
{ACPI_EXD_UINT8, ACPI_EXD_OFFSET(processor.proc_id), "Processor ID"},
{ACPI_EXD_UINT8, ACPI_EXD_OFFSET(processor.length), "Length"},
{ACPI_EXD_ADDRESS, ACPI_EXD_OFFSET(processor.address), "Address"},
- {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(processor.system_notify),
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(processor.notify_list[0]),
"System Notify"},
- {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(processor.device_notify),
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(processor.notify_list[1]),
"Device Notify"},
{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(processor.handler), "Handler"}
};
static struct acpi_exdump_info acpi_ex_dump_thermal[4] = {
{ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_thermal), NULL},
- {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(thermal_zone.system_notify),
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(thermal_zone.notify_list[0]),
"System Notify"},
- {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(thermal_zone.device_notify),
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(thermal_zone.notify_list[1]),
"Device Notify"},
{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(thermal_zone.handler), "Handler"}
};
{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(address_space.context), "Context"}
};
-static struct acpi_exdump_info acpi_ex_dump_notify[3] = {
+static struct acpi_exdump_info acpi_ex_dump_notify[7] = {
{ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_notify), NULL},
{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(notify.node), "Node"},
- {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(notify.context), "Context"}
+ {ACPI_EXD_UINT32, ACPI_EXD_OFFSET(notify.handler_type), "Handler Type"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(notify.handler), "Handler"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(notify.context), "Context"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(notify.next[0]),
+ "Next System Notify"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(notify.next[1]), "Next Device Notify"}
};
/* Miscellaneous tables */
* FUNCTION: acpi_ex_dump_object
*
* PARAMETERS: obj_desc - Descriptor to dump
- * Info - Info table corresponding to this object
+ * info - Info table corresponding to this object
* type
*
* RETURN: None
* FUNCTION: acpi_ex_dump_operand
*
* PARAMETERS: *obj_desc - Pointer to entry to be dumped
- * Depth - Current nesting depth
+ * depth - Current nesting depth
*
* RETURN: None
*
*
* FUNCTION: acpi_ex_dump_operands
*
- * PARAMETERS: Operands - A list of Operand objects
+ * PARAMETERS: operands - A list of Operand objects
* opcode_name - AML opcode name
* num_operands - Operand count for this opcode
*
*
* FUNCTION: acpi_ex_out* functions
*
- * PARAMETERS: Title - Descriptive text
- * Value - Value to be displayed
+ * PARAMETERS: title - Descriptive text
+ * value - Value to be displayed
*
* DESCRIPTION: Object dump output formatting functions. These functions
* reduce the number of format strings required and keeps them
*
* FUNCTION: acpi_ex_dump_namespace_node
*
- * PARAMETERS: Node - Descriptor to dump
- * Flags - Force display if TRUE
+ * PARAMETERS: node - Descriptor to dump
+ * flags - Force display if TRUE
*
* DESCRIPTION: Dumps the members of the given.Node
*
*
* FUNCTION: acpi_ex_dump_reference_obj
*
- * PARAMETERS: Object - Descriptor to dump
+ * PARAMETERS: object - Descriptor to dump
*
* DESCRIPTION: Dumps a reference object
*
* FUNCTION: acpi_ex_dump_package_obj
*
* PARAMETERS: obj_desc - Descriptor to dump
- * Level - Indentation Level
- * Index - Package index for this object
+ * level - Indentation Level
+ * index - Package index for this object
*
* DESCRIPTION: Dumps the elements of the package
*
case ACPI_TYPE_STRING:
acpi_os_printf("[String] Value: ");
- for (i = 0; i < obj_desc->string.length; i++) {
- acpi_os_printf("%c", obj_desc->string.pointer[i]);
- }
+ acpi_ut_print_string(obj_desc->string.pointer, ACPI_UINT8_MAX);
acpi_os_printf("\n");
break;
* FUNCTION: acpi_ex_dump_object_descriptor
*
* PARAMETERS: obj_desc - Descriptor to dump
- * Flags - Force display if TRUE
+ * flags - Force display if TRUE
*
* DESCRIPTION: Dumps the members of the object descriptor given.
*
* PARAMETERS: obj_desc - Field to be read
* field_datum_byte_offset - Byte offset of this datum within the
* parent field
- * Value - Where to store value (must at least
+ * value - Where to store value (must at least
* 64 bits)
- * Function - Read or Write flag plus other region-
+ * function - Read or Write flag plus other region-
* dependent flags
*
* RETURN: Status
* FUNCTION: acpi_ex_register_overflow
*
* PARAMETERS: obj_desc - Register(Field) to be written
- * Value - Value to be stored
+ * value - Value to be stored
*
* RETURN: TRUE if value overflows the field, FALSE otherwise
*
* PARAMETERS: obj_desc - Field to be read
* field_datum_byte_offset - Byte offset of this datum within the
* parent field
- * Value - Where to store value (must be 64 bits)
+ * value - Where to store value (must be 64 bits)
* read_write - Read or Write flag
*
* RETURN: Status
* FUNCTION: acpi_ex_write_with_update_rule
*
* PARAMETERS: obj_desc - Field to be written
- * Mask - bitmask within field datum
+ * mask - bitmask within field datum
* field_value - Value to write
* field_datum_byte_offset - Offset of datum within field
*
* FUNCTION: acpi_ex_extract_from_field
*
* PARAMETERS: obj_desc - Field to be read
- * Buffer - Where to store the field data
+ * buffer - Where to store the field data
* buffer_length - Length of Buffer
*
* RETURN: Status
* FUNCTION: acpi_ex_insert_into_field
*
* PARAMETERS: obj_desc - Field to be written
- * Buffer - Data to be written
+ * buffer - Data to be written
* buffer_length - Length of Buffer
*
* RETURN: Status
*
* FUNCTION: acpi_ex_concat_template
*
- * PARAMETERS: Operand0 - First source object
- * Operand1 - Second source object
+ * PARAMETERS: operand0 - First source object
+ * operand1 - Second source object
* actual_return_desc - Where to place the return object
* walk_state - Current walk state
*
*
* FUNCTION: acpi_ex_do_concatenate
*
- * PARAMETERS: Operand0 - First source object
- * Operand1 - Second source object
+ * PARAMETERS: operand0 - First source object
+ * operand1 - Second source object
* actual_return_desc - Where to place the return object
* walk_state - Current walk state
*
*
* FUNCTION: acpi_ex_do_math_op
*
- * PARAMETERS: Opcode - AML opcode
- * Integer0 - Integer operand #0
- * Integer1 - Integer operand #1
+ * PARAMETERS: opcode - AML opcode
+ * integer0 - Integer operand #0
+ * integer1 - Integer operand #1
*
* RETURN: Integer result of the operation
*
*
* FUNCTION: acpi_ex_do_logical_numeric_op
*
- * PARAMETERS: Opcode - AML opcode
- * Integer0 - Integer operand #0
- * Integer1 - Integer operand #1
+ * PARAMETERS: opcode - AML opcode
+ * integer0 - Integer operand #0
+ * integer1 - Integer operand #1
* logical_result - TRUE/FALSE result of the operation
*
* RETURN: Status
*
* FUNCTION: acpi_ex_do_logical_op
*
- * PARAMETERS: Opcode - AML opcode
- * Operand0 - operand #0
- * Operand1 - operand #1
+ * PARAMETERS: opcode - AML opcode
+ * operand0 - operand #0
+ * operand1 - operand #1
* logical_result - TRUE/FALSE result of the operation
*
* RETURN: Status
* FUNCTION: acpi_ex_link_mutex
*
* PARAMETERS: obj_desc - The mutex to be linked
- * Thread - Current executing thread object
+ * thread - Current executing thread object
*
* RETURN: None
*
*
* FUNCTION: acpi_ex_acquire_mutex_object
*
- * PARAMETERS: Timeout - Timeout in milliseconds
+ * PARAMETERS: timeout - Timeout in milliseconds
* obj_desc - Mutex object
* thread_id - Current thread state
*
*
* FUNCTION: acpi_ex_release_all_mutexes
*
- * PARAMETERS: Thread - Current executing thread object
+ * PARAMETERS: thread - Current executing thread object
*
* RETURN: Status
*
*
* FUNCTION: acpi_ex_prep_field_value
*
- * PARAMETERS: Info - Contains all field creation info
+ * PARAMETERS: info - Contains all field creation info
*
* RETURN: Status
*
- * DESCRIPTION: Construct a union acpi_operand_object of type def_field and
- * connect it to the parent Node.
+ * DESCRIPTION: Construct an object of type union acpi_operand_object with a
+ * subtype of def_field and connect it to the parent Node.
*
******************************************************************************/
*
* FUNCTION: acpi_ex_system_memory_space_handler
*
- * PARAMETERS: Function - Read or Write operation
- * Address - Where in the space to read or write
+ * PARAMETERS: function - Read or Write operation
+ * address - Where in the space to read or write
* bit_width - Field width in bits (8, 16, or 32)
- * Value - Pointer to in or out value
+ * value - Pointer to in or out value
* handler_context - Pointer to Handler's context
* region_context - Pointer to context specific to the
* accessed region
*
* FUNCTION: acpi_ex_system_io_space_handler
*
- * PARAMETERS: Function - Read or Write operation
- * Address - Where in the space to read or write
+ * PARAMETERS: function - Read or Write operation
+ * address - Where in the space to read or write
* bit_width - Field width in bits (8, 16, or 32)
- * Value - Pointer to in or out value
+ * value - Pointer to in or out value
* handler_context - Pointer to Handler's context
* region_context - Pointer to context specific to the
* accessed region
*
* FUNCTION: acpi_ex_pci_config_space_handler
*
- * PARAMETERS: Function - Read or Write operation
- * Address - Where in the space to read or write
+ * PARAMETERS: function - Read or Write operation
+ * address - Where in the space to read or write
* bit_width - Field width in bits (8, 16, or 32)
- * Value - Pointer to in or out value
+ * value - Pointer to in or out value
* handler_context - Pointer to Handler's context
* region_context - Pointer to context specific to the
* accessed region
* pci_function is the PCI device function number
* pci_register is the Config space register range 0-255 bytes
*
- * Value - input value for write, output address for read
+ * value - input value for write, output address for read
*
*/
pci_id = (struct acpi_pci_id *)region_context;
*
* FUNCTION: acpi_ex_cmos_space_handler
*
- * PARAMETERS: Function - Read or Write operation
- * Address - Where in the space to read or write
+ * PARAMETERS: function - Read or Write operation
+ * address - Where in the space to read or write
* bit_width - Field width in bits (8, 16, or 32)
- * Value - Pointer to in or out value
+ * value - Pointer to in or out value
* handler_context - Pointer to Handler's context
* region_context - Pointer to context specific to the
* accessed region
*
* FUNCTION: acpi_ex_pci_bar_space_handler
*
- * PARAMETERS: Function - Read or Write operation
- * Address - Where in the space to read or write
+ * PARAMETERS: function - Read or Write operation
+ * address - Where in the space to read or write
* bit_width - Field width in bits (8, 16, or 32)
- * Value - Pointer to in or out value
+ * value - Pointer to in or out value
* handler_context - Pointer to Handler's context
* region_context - Pointer to context specific to the
* accessed region
*
* FUNCTION: acpi_ex_data_table_space_handler
*
- * PARAMETERS: Function - Read or Write operation
- * Address - Where in the space to read or write
+ * PARAMETERS: function - Read or Write operation
+ * address - Where in the space to read or write
* bit_width - Field width in bits (8, 16, or 32)
- * Value - Pointer to in or out value
+ * value - Pointer to in or out value
* handler_context - Pointer to Handler's context
* region_context - Pointer to context specific to the
* accessed region
stack_desc = *stack_ptr;
- /* This is a union acpi_operand_object */
+ /* This is an object of type union acpi_operand_object */
switch (stack_desc->common.type) {
case ACPI_TYPE_LOCAL_REFERENCE:
* FUNCTION: acpi_ex_resolve_multiple
*
* PARAMETERS: walk_state - Current state (contains AML opcode)
- * Operand - Starting point for resolution
+ * operand - Starting point for resolution
* return_type - Where the object type is returned
* return_desc - Where the resolved object is returned
*
*
* FUNCTION: acpi_ex_resolve_operands
*
- * PARAMETERS: Opcode - Opcode being interpreted
+ * PARAMETERS: opcode - Opcode being interpreted
* stack_ptr - Pointer to the operand stack to be
* resolved
* walk_state - Current state
case ARGI_DEVICE_REF:
case ARGI_TARGETREF: /* Allows implicit conversion rules before store */
case ARGI_FIXED_TARGET: /* No implicit conversion before store to target */
- case ARGI_SIMPLE_TARGET: /* Name, Local, or Arg - no implicit conversion */
+ case ARGI_SIMPLE_TARGET: /* Name, Local, or arg - no implicit conversion */
/*
* Need an operand of type ACPI_TYPE_LOCAL_REFERENCE
/*
* Need an operand of type ACPI_TYPE_INTEGER,
* But we can implicitly convert from a STRING or BUFFER
- * Aka - "Implicit Source Operand Conversion"
+ * aka - "Implicit Source Operand Conversion"
*/
status =
acpi_ex_convert_to_integer(obj_desc, stack_ptr, 16);
/*
* Need an operand of type ACPI_TYPE_BUFFER,
* But we can implicitly convert from a STRING or INTEGER
- * Aka - "Implicit Source Operand Conversion"
+ * aka - "Implicit Source Operand Conversion"
*/
status = acpi_ex_convert_to_buffer(obj_desc, stack_ptr);
if (ACPI_FAILURE(status)) {
/*
* Need an operand of type ACPI_TYPE_STRING,
* But we can implicitly convert from a BUFFER or INTEGER
- * Aka - "Implicit Source Operand Conversion"
+ * aka - "Implicit Source Operand Conversion"
*/
status = acpi_ex_convert_to_string(obj_desc, stack_ptr,
ACPI_IMPLICIT_CONVERT_HEX);
* FUNCTION: acpi_ex_store
*
* PARAMETERS: *source_desc - Value to be stored
- * *dest_desc - Where to store it. Must be an NS node
- * or a union acpi_operand_object of type
+ * *dest_desc - Where to store it. Must be an NS node
+ * or union acpi_operand_object of type
* Reference;
* walk_state - Current walk state
*
* FUNCTION: acpi_ex_store_object_to_node
*
* PARAMETERS: source_desc - Value to be stored
- * Node - Named object to receive the value
+ * node - Named object to receive the value
* walk_state - Current walk state
* implicit_conversion - Perform implicit conversion (yes/no)
*
* NOTE: ACPI versions up to 3.0 specified that the buffer must be
* truncated if the string is smaller than the buffer. However, "other"
* implementations of ACPI never did this and thus became the defacto
- * standard. ACPI 3.0_a changes this behavior such that the buffer
+ * standard. ACPI 3.0A changes this behavior such that the buffer
* is no longer truncated.
*/
*
* FUNCTION: acpi_ex_system_wait_semaphore
*
- * PARAMETERS: Semaphore - Semaphore to wait on
- * Timeout - Max time to wait
+ * PARAMETERS: semaphore - Semaphore to wait on
+ * timeout - Max time to wait
*
* RETURN: Status
*
*
* FUNCTION: acpi_ex_system_wait_mutex
*
- * PARAMETERS: Mutex - Mutex to wait on
- * Timeout - Max time to wait
+ * PARAMETERS: mutex - Mutex to wait on
+ * timeout - Max time to wait
*
* RETURN: Status
*
*
* DESCRIPTION: Reacquire the interpreter execution region from within the
* interpreter code. Failure to enter the interpreter region is a
- * fatal system error. Used in conjunction with
+ * fatal system error. Used in conjunction with
* relinquish_interpreter
*
******************************************************************************/
*
* FUNCTION: acpi_ex_digits_needed
*
- * PARAMETERS: Value - Value to be represented
- * Base - Base of representation
+ * PARAMETERS: value - Value to be represented
+ * base - Base of representation
*
* RETURN: The number of digits.
*
* PARAMETERS: out_string - Where to put the converted string. At least
* 21 bytes are needed to hold the largest
* possible 64-bit integer.
- * Value - Value to be converted
+ * value - Value to be converted
*
* RETURN: None, string
*
*
* RETURN: TRUE if valid/supported ID.
*
- * DESCRIPTION: Validate an operation region space_iD.
+ * DESCRIPTION: Validate an operation region space_ID.
*
******************************************************************************/
*
* FUNCTION: acpi_hw_set_mode
*
- * PARAMETERS: Mode - SYS_MODE_ACPI or SYS_MODE_LEGACY
+ * PARAMETERS: mode - SYS_MODE_ACPI or SYS_MODE_LEGACY
*
* RETURN: Status
*
* FUNCTION: acpi_hw_extended_sleep
*
* PARAMETERS: sleep_state - Which sleep state to enter
- * Flags - ACPI_EXECUTE_GTS to run optional method
+ * flags - ACPI_EXECUTE_GTS to run optional method
*
* RETURN: Status
*
/* Clear wake status (WAK_STS) */
- status = acpi_write(ACPI_X_WAKE_STATUS, &acpi_gbl_FADT.sleep_status);
+ status =
+ acpi_write((u64)ACPI_X_WAKE_STATUS, &acpi_gbl_FADT.sleep_status);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
((acpi_gbl_sleep_type_a << ACPI_X_SLEEP_TYPE_POSITION) &
ACPI_X_SLEEP_TYPE_MASK);
- status = acpi_write((sleep_type_value | ACPI_X_SLEEP_ENABLE),
+ status = acpi_write((u64)(sleep_type_value | ACPI_X_SLEEP_ENABLE),
&acpi_gbl_FADT.sleep_control);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
* FUNCTION: acpi_hw_extended_wake_prep
*
* PARAMETERS: sleep_state - Which sleep state we just exited
- * Flags - ACPI_EXECUTE_BFS to run optional method
+ * flags - ACPI_EXECUTE_BFS to run optional method
*
* RETURN: Status
*
((acpi_gbl_sleep_type_a << ACPI_X_SLEEP_TYPE_POSITION) &
ACPI_X_SLEEP_TYPE_MASK);
- (void)acpi_write((sleep_type_value | ACPI_X_SLEEP_ENABLE),
+ (void)acpi_write((u64)(sleep_type_value | ACPI_X_SLEEP_ENABLE),
&acpi_gbl_FADT.sleep_control);
}
* FUNCTION: acpi_hw_extended_wake
*
* PARAMETERS: sleep_state - Which sleep state we just exited
- * Flags - Reserved, set to zero
+ * flags - Reserved, set to zero
*
* RETURN: Status
*
* and use it to determine whether the system is rebooting or
* resuming. Clear WAK_STS for compatibility.
*/
- (void)acpi_write(ACPI_X_WAKE_STATUS, &acpi_gbl_FADT.sleep_status);
+ (void)acpi_write((u64)ACPI_X_WAKE_STATUS, &acpi_gbl_FADT.sleep_status);
acpi_gbl_system_awake_and_running = TRUE;
acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, ACPI_SST_WORKING);
*
* FUNCTION: acpi_hw_validate_register
*
- * PARAMETERS: Reg - GAS register structure
+ * PARAMETERS: reg - GAS register structure
* max_bit_width - Max bit_width supported (32 or 64)
- * Address - Pointer to where the gas->address
+ * address - Pointer to where the gas->address
* is returned
*
* RETURN: Status
return (AE_BAD_ADDRESS);
}
- /* Validate the space_iD */
+ /* Validate the space_ID */
if ((reg->space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) &&
(reg->space_id != ACPI_ADR_SPACE_SYSTEM_IO)) {
*
* FUNCTION: acpi_hw_read
*
- * PARAMETERS: Value - Where the value is returned
- * Reg - GAS register structure
+ * PARAMETERS: value - Where the value is returned
+ * reg - GAS register structure
*
* RETURN: Status
*
*
* LIMITATIONS: <These limitations also apply to acpi_hw_write>
* bit_width must be exactly 8, 16, or 32.
- * space_iD must be system_memory or system_iO.
+ * space_ID must be system_memory or system_IO.
* bit_offset and access_width are currently ignored, as there has
* not been a need to implement these.
*
*
* FUNCTION: acpi_hw_write
*
- * PARAMETERS: Value - Value to be written
- * Reg - GAS register structure
+ * PARAMETERS: value - Value to be written
+ * reg - GAS register structure
*
* RETURN: Status
*
* FUNCTION: acpi_hw_register_write
*
* PARAMETERS: register_id - ACPI Register ID
- * Value - The value to write
+ * value - The value to write
*
* RETURN: Status
*
*
* FUNCTION: acpi_hw_read_multiple
*
- * PARAMETERS: Value - Where the register value is returned
+ * PARAMETERS: value - Where the register value is returned
* register_a - First ACPI register (required)
* register_b - Second ACPI register (optional)
*
*
* FUNCTION: acpi_hw_write_multiple
*
- * PARAMETERS: Value - The value to write
+ * PARAMETERS: value - The value to write
* register_a - First ACPI register (required)
* register_b - Second ACPI register (optional)
*
* FUNCTION: acpi_hw_legacy_sleep
*
* PARAMETERS: sleep_state - Which sleep state to enter
- * Flags - ACPI_EXECUTE_GTS to run optional method
+ * flags - ACPI_EXECUTE_GTS to run optional method
*
* RETURN: Status
*
return_ACPI_STATUS(status);
}
- if (sleep_state != ACPI_STATE_S5) {
- /*
- * Disable BM arbitration. This feature is contained within an
- * optional register (PM2 Control), so ignore a BAD_ADDRESS
- * exception.
- */
- status = acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 1);
- if (ACPI_FAILURE(status) && (status != AE_BAD_ADDRESS)) {
- return_ACPI_STATUS(status);
- }
- }
-
/*
* 1) Disable/Clear all GPEs
* 2) Enable all wakeup GPEs
* FUNCTION: acpi_hw_legacy_wake_prep
*
* PARAMETERS: sleep_state - Which sleep state we just exited
- * Flags - ACPI_EXECUTE_BFS to run optional method
+ * flags - ACPI_EXECUTE_BFS to run optional method
*
* RETURN: Status
*
* FUNCTION: acpi_hw_legacy_wake
*
* PARAMETERS: sleep_state - Which sleep state we just exited
- * Flags - Reserved, set to zero
+ * flags - Reserved, set to zero
*
* RETURN: Status
*
[ACPI_EVENT_POWER_BUTTON].
status_register_id, ACPI_CLEAR_STATUS);
- /*
- * Enable BM arbitration. This feature is contained within an
- * optional register (PM2 Control), so ignore a BAD_ADDRESS
- * exception.
- */
- status = acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 0);
- if (ACPI_FAILURE(status) && (status != AE_BAD_ADDRESS)) {
- return_ACPI_STATUS(status);
- }
-
acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, ACPI_SST_WORKING);
return_ACPI_STATUS(status);
}
*
* FUNCTION: acpi_get_timer_resolution
*
- * PARAMETERS: Resolution - Where the resolution is returned
+ * PARAMETERS: resolution - Where the resolution is returned
*
* RETURN: Status and timer resolution
*
*
* FUNCTION: acpi_get_timer
*
- * PARAMETERS: Ticks - Where the timer value is returned
+ * PARAMETERS: ticks - Where the timer value is returned
*
* RETURN: Status and current timer value (ticks)
*
*
* The table is used to implement the Microsoft port access rules that
* first appeared in Windows XP. Some ports are always illegal, and some
- * ports are only illegal if the BIOS calls _OSI with a win_xP string or
+ * ports are only illegal if the BIOS calls _OSI with a win_XP string or
* later (meaning that the BIOS itelf is post-XP.)
*
* This provides ACPICA with the desired port protections and
*
* Description of port entries:
* DMA: DMA controller
- * PIC0: Programmable Interrupt Controller (8259_a)
+ * PIC0: Programmable Interrupt Controller (8259A)
* PIT1: System Timer 1
* PIT2: System Timer 2 failsafe
* RTC: Real-time clock
*
* FUNCTION: acpi_read
*
- * PARAMETERS: Value - Where the value is returned
- * Reg - GAS register structure
+ * PARAMETERS: value - Where the value is returned
+ * reg - GAS register structure
*
* RETURN: Status
*
*
* LIMITATIONS: <These limitations also apply to acpi_write>
* bit_width must be exactly 8, 16, 32, or 64.
- * space_iD must be system_memory or system_iO.
+ * space_ID must be system_memory or system_IO.
* bit_offset and access_width are currently ignored, as there has
* not been a need to implement these.
*
*
* FUNCTION: acpi_write
*
- * PARAMETERS: Value - Value to be written
- * Reg - GAS register structure
+ * PARAMETERS: value - Value to be written
+ * reg - GAS register structure
*
* RETURN: Status
*
* *sleep_type_a - Where SLP_TYPa is returned
* *sleep_type_b - Where SLP_TYPb is returned
*
- * RETURN: Status - ACPI status
+ * RETURN: status - ACPI status
*
* DESCRIPTION: Obtain the SLP_TYPa and SLP_TYPb values for the requested sleep
* state.
ACPI_FLUSH_CPU_CACHE();
status = acpi_hw_write_port(acpi_gbl_FADT.smi_command,
- (u32)acpi_gbl_FADT.S4bios_request, 8);
+ (u32)acpi_gbl_FADT.s4_bios_request, 8);
do {
acpi_os_stall(1000);
* FUNCTION: acpi_enter_sleep_state
*
* PARAMETERS: sleep_state - Which sleep state to enter
- * Flags - ACPI_EXECUTE_GTS to run optional method
+ * flags - ACPI_EXECUTE_GTS to run optional method
*
* RETURN: Status
*
* FUNCTION: acpi_leave_sleep_state_prep
*
* PARAMETERS: sleep_state - Which sleep state we are exiting
- * Flags - ACPI_EXECUTE_BFS to run optional method
+ * flags - ACPI_EXECUTE_BFS to run optional method
*
* RETURN: Status
*
#if defined (ACPI_ASL_COMPILER)
- /* Save the parameter count for the i_aSL compiler */
+ /* Save the parameter count for the iASL compiler */
new_node->value = obj_desc->method.param_count;
#else
* FUNCTION: acpi_ns_lookup
*
* PARAMETERS: scope_info - Current scope info block
- * Pathname - Search pathname, in internal format
+ * pathname - Search pathname, in internal format
* (as represented in the AML stream)
- * Type - Type associated with name
+ * type - Type associated with name
* interpreter_mode - IMODE_LOAD_PASS2 => add name if not found
- * Flags - Flags describing the search restrictions
+ * flags - Flags describing the search restrictions
* walk_state - Current state of the walk
* return_node - Where the Node is placed (if found
* or created successfully)
*
* FUNCTION: acpi_ns_create_node
*
- * PARAMETERS: Name - Name of the new node (4 char ACPI name)
+ * PARAMETERS: name - Name of the new node (4 char ACPI name)
*
* RETURN: New namespace node (Null on failure)
*
*
* FUNCTION: acpi_ns_delete_node
*
- * PARAMETERS: Node - Node to be deleted
+ * PARAMETERS: node - Node to be deleted
*
* RETURN: None
*
*
* FUNCTION: acpi_ns_remove_node
*
- * PARAMETERS: Node - Node to be removed/deleted
+ * PARAMETERS: node - Node to be removed/deleted
*
* RETURN: None
*
*
* PARAMETERS: walk_state - Current state of the walk
* parent_node - The parent of the new Node
- * Node - The new Node to install
- * Type - ACPI object type of the new Node
+ * node - The new Node to install
+ * type - ACPI object type of the new Node
*
* RETURN: None
*
* FUNCTION: acpi_ns_print_pathname
*
* PARAMETERS: num_segments - Number of ACPI name segments
- * Pathname - The compressed (internal) path
+ * pathname - The compressed (internal) path
*
* RETURN: None
*
*
* FUNCTION: acpi_ns_dump_pathname
*
- * PARAMETERS: Handle - Object
- * Msg - Prefix message
- * Level - Desired debug level
- * Component - Caller's component ID
+ * PARAMETERS: handle - Object
+ * msg - Prefix message
+ * level - Desired debug level
+ * component - Caller's component ID
*
* RETURN: None
*
* FUNCTION: acpi_ns_dump_one_object
*
* PARAMETERS: obj_handle - Node to be dumped
- * Level - Nesting level of the handle
- * Context - Passed into walk_namespace
+ * level - Nesting level of the handle
+ * context - Passed into walk_namespace
* return_value - Not used
*
* RETURN: Status
*
* FUNCTION: acpi_ns_dump_objects
*
- * PARAMETERS: Type - Object type to be dumped
+ * PARAMETERS: type - Object type to be dumped
* display_type - 0 or ACPI_DISPLAY_SUMMARY
* max_depth - Maximum depth of dump. Use ACPI_UINT32_MAX
* for an effectively unlimited depth.
*
* FUNCTION: acpi_ns_dump_entry
*
- * PARAMETERS: Handle - Node to be dumped
+ * PARAMETERS: handle - Node to be dumped
* debug_level - Output level
*
* RETURN: None
*
* FUNCTION: acpi_ns_dump_one_device
*
- * PARAMETERS: Handle - Node to be dumped
- * Level - Nesting level of the handle
- * Context - Passed into walk_namespace
+ * PARAMETERS: handle - Node to be dumped
+ * level - Nesting level of the handle
+ * context - Passed into walk_namespace
* return_value - Not used
*
* RETURN: Status
*
* FUNCTION: acpi_ns_evaluate
*
- * PARAMETERS: Info - Evaluation info block, contains:
+ * PARAMETERS: info - Evaluation info block, contains:
* prefix_node - Prefix or Method/Object Node to execute
- * Pathname - Name of method to execute, If NULL, the
+ * pathname - Name of method to execute, If NULL, the
* Node is the object to execute
- * Parameters - List of parameters to pass to the method,
+ * parameters - List of parameters to pass to the method,
* terminated by NULL. Params itself may be
* NULL if no parameters are being passed.
* return_object - Where to put method's return value (if
* parameter_type - Type of Parameter list
* return_object - Where to put method's return value (if
* any). If NULL, no value is returned.
- * Flags - ACPI_IGNORE_RETURN_VALUE to delete return
+ * flags - ACPI_IGNORE_RETURN_VALUE to delete return
*
* RETURN: Status
*
* FUNCTION: acpi_ns_exec_module_code
*
* PARAMETERS: method_obj - Object container for the module-level code
- * Info - Info block for method evaluation
+ * info - Info block for method evaluation
*
* RETURN: None. Exceptions during method execution are ignored, since
* we cannot abort a table load.
* FUNCTION: acpi_ns_init_one_object
*
* PARAMETERS: obj_handle - Node
- * Level - Current nesting level
- * Context - Points to a init info struct
+ * level - Current nesting level
+ * context - Points to a init info struct
* return_value - Not used
*
* RETURN: Status
* we will not run _INI, but we continue to examine the children
* of this device.
*
- * From the ACPI spec, description of _STA: (Note - no mention
+ * From the ACPI spec, description of _STA: (note - no mention
* of whether to run _INI or not on the device in question)
*
* "_STA may return bit 0 clear (not present) with bit 3 set
* FUNCTION: acpi_ns_load_table
*
* PARAMETERS: table_index - Index for table to be loaded
- * Node - Owning NS node
+ * node - Owning NS node
*
* RETURN: Status
*
*
* FUNCTION: acpi_ns_unload_name_space
*
- * PARAMETERS: Handle - Root of namespace subtree to be deleted
+ * PARAMETERS: handle - Root of namespace subtree to be deleted
*
* RETURN: Status
*
*
* FUNCTION: acpi_ns_build_external_path
*
- * PARAMETERS: Node - NS node whose pathname is needed
- * Size - Size of the pathname
+ * PARAMETERS: node - NS node whose pathname is needed
+ * size - Size of the pathname
* *name_buffer - Where to return the pathname
*
* RETURN: Status
*
* FUNCTION: acpi_ns_get_external_pathname
*
- * PARAMETERS: Node - Namespace node whose pathname is needed
+ * PARAMETERS: node - Namespace node whose pathname is needed
*
* RETURN: Pointer to storage containing the fully qualified name of
* the node, In external format (name segments separated by path
*
* FUNCTION: acpi_ns_get_pathname_length
*
- * PARAMETERS: Node - Namespace node
+ * PARAMETERS: node - Namespace node
*
* RETURN: Length of path, including prefix
*
*
* PARAMETERS: target_handle - Handle of named object whose name is
* to be found
- * Buffer - Where the pathname is returned
+ * buffer - Where the pathname is returned
*
* RETURN: Status, Buffer is filled with pathname if status is AE_OK
*
*
* FUNCTION: acpi_ns_attach_object
*
- * PARAMETERS: Node - Parent Node
- * Object - Object to be attached
- * Type - Type of object, or ACPI_TYPE_ANY if not
+ * PARAMETERS: node - Parent Node
+ * object - Object to be attached
+ * type - Type of object, or ACPI_TYPE_ANY if not
* known
*
* RETURN: Status
*
* FUNCTION: acpi_ns_detach_object
*
- * PARAMETERS: Node - A Namespace node whose object will be detached
+ * PARAMETERS: node - A Namespace node whose object will be detached
*
* RETURN: None.
*
*
* FUNCTION: acpi_ns_get_attached_object
*
- * PARAMETERS: Node - Namespace node
+ * PARAMETERS: node - Namespace node
*
* RETURN: Current value of the object field from the Node whose
* handle is passed
*
* FUNCTION: acpi_ns_get_secondary_object
*
- * PARAMETERS: Node - Namespace node
+ * PARAMETERS: node - Namespace node
*
* RETURN: Current value of the object field from the Node whose
* handle is passed.
*
* FUNCTION: acpi_ns_attach_data
*
- * PARAMETERS: Node - Namespace node
- * Handler - Handler to be associated with the data
- * Data - Data to be attached
+ * PARAMETERS: node - Namespace node
+ * handler - Handler to be associated with the data
+ * data - Data to be attached
*
* RETURN: Status
*
*
* FUNCTION: acpi_ns_detach_data
*
- * PARAMETERS: Node - Namespace node
- * Handler - Handler associated with the data
+ * PARAMETERS: node - Namespace node
+ * handler - Handler associated with the data
*
* RETURN: Status
*
*
* FUNCTION: acpi_ns_get_attached_data
*
- * PARAMETERS: Node - Namespace node
- * Handler - Handler associated with the data
- * Data - Where the data is returned
+ * PARAMETERS: node - Namespace node
+ * handler - Handler associated with the data
+ * data - Where the data is returned
*
* RETURN: Status
*
*
* FUNCTION: acpi_ns_check_predefined_names
*
- * PARAMETERS: Node - Namespace node for the method/object
+ * PARAMETERS: node - Namespace node for the method/object
* user_param_count - Number of parameters actually passed
* return_status - Status from the object evaluation
* return_object_ptr - Pointer to the object returned from the
*
* FUNCTION: acpi_ns_check_parameter_count
*
- * PARAMETERS: Pathname - Full pathname to the node (for error msgs)
- * Node - Namespace node for the method/object
+ * PARAMETERS: pathname - Full pathname to the node (for error msgs)
+ * node - Namespace node for the method/object
* user_param_count - Number of args passed in by the caller
- * Predefined - Pointer to entry in predefined name table
+ * predefined - Pointer to entry in predefined name table
*
* RETURN: None
*
*
* FUNCTION: acpi_ns_check_for_predefined_name
*
- * PARAMETERS: Node - Namespace node for the method/object
+ * PARAMETERS: node - Namespace node for the method/object
*
* RETURN: Pointer to entry in predefined table. NULL indicates not found.
*
*
* FUNCTION: acpi_ns_check_package
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* return_object_ptr - Pointer to the object returned from the
* evaluation of a method or object
*
/* Create the new outer package and populate it */
status =
- acpi_ns_wrap_with_package(data, *elements,
+ acpi_ns_wrap_with_package(data, return_object,
return_object_ptr);
if (ACPI_FAILURE(status)) {
return (status);
*
* FUNCTION: acpi_ns_check_package_list
*
- * PARAMETERS: Data - Pointer to validation data structure
- * Package - Pointer to package-specific info for method
- * Elements - Element list of parent package. All elements
+ * PARAMETERS: data - Pointer to validation data structure
+ * package - Pointer to package-specific info for method
+ * elements - Element list of parent package. All elements
* of this list should be of type Package.
- * Count - Count of subpackages
+ * count - Count of subpackages
*
* RETURN: Status
*
*
* FUNCTION: acpi_ns_check_package_elements
*
- * PARAMETERS: Data - Pointer to validation data structure
- * Elements - Pointer to the package elements array
- * Type1 - Object type for first group
- * Count1 - Count for first group
- * Type2 - Object type for second group
- * Count2 - Count for second group
+ * PARAMETERS: data - Pointer to validation data structure
+ * elements - Pointer to the package elements array
+ * type1 - Object type for first group
+ * count1 - Count for first group
+ * type2 - Object type for second group
+ * count2 - Count for second group
* start_index - Start of the first group of elements
*
* RETURN: Status
*
* FUNCTION: acpi_ns_check_object_type
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* return_object_ptr - Pointer to the object returned from the
* evaluation of a method or object
* expected_btypes - Bitmap of expected return type(s)
*
* FUNCTION: acpi_ns_check_reference
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* return_object - Object returned from the evaluation of a
* method or object
*
*
* FUNCTION: acpi_ns_get_expected_types
*
- * PARAMETERS: Buffer - Pointer to where the string is returned
+ * PARAMETERS: buffer - Pointer to where the string is returned
* expected_btypes - Bitmap of expected return type(s)
*
* RETURN: Buffer is populated with type names.
*
* FUNCTION: acpi_ns_repair_object
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* expected_btypes - Object types expected
* package_index - Index of object within parent package (if
* applicable - ACPI_NOT_PACKAGE_ELEMENT
*
* FUNCTION: acpi_ns_repair_null_element
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* expected_btypes - Object types expected
* package_index - Index of object within parent package (if
* applicable - ACPI_NOT_PACKAGE_ELEMENT
*/
if (expected_btypes & ACPI_RTYPE_INTEGER) {
- /* Need an Integer - create a zero-value integer */
+ /* Need an integer - create a zero-value integer */
new_object = acpi_ut_create_integer_object((u64)0);
} else if (expected_btypes & ACPI_RTYPE_STRING) {
- /* Need a String - create a NULL string */
+ /* Need a string - create a NULL string */
new_object = acpi_ut_create_string_object(0);
} else if (expected_btypes & ACPI_RTYPE_BUFFER) {
- /* Need a Buffer - create a zero-length buffer */
+ /* Need a buffer - create a zero-length buffer */
new_object = acpi_ut_create_buffer_object(0);
} else {
*
* FUNCTION: acpi_ns_remove_null_elements
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* package_type - An acpi_return_package_types value
* obj_desc - A Package object
*
*
* FUNCTION: acpi_ns_wrap_with_package
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* original_object - Pointer to the object to repair.
* obj_desc_ptr - The new package object is returned here
*
*
* FUNCTION: acpi_ns_complex_repairs
*
- * PARAMETERS: Data - Pointer to validation data structure
- * Node - Namespace node for the method/object
+ * PARAMETERS: data - Pointer to validation data structure
+ * node - Namespace node for the method/object
* validate_status - Original status of earlier validation
* return_object_ptr - Pointer to the object returned from the
* evaluation of a method or object
*
* FUNCTION: acpi_ns_match_repairable_name
*
- * PARAMETERS: Node - Namespace node for the method/object
+ * PARAMETERS: node - Namespace node for the method/object
*
* RETURN: Pointer to entry in repair table. NULL indicates not found.
*
*
* FUNCTION: acpi_ns_repair_ALR
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* return_object_ptr - Pointer to the object returned from the
* evaluation of a method or object
*
*
* FUNCTION: acpi_ns_repair_FDE
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* return_object_ptr - Pointer to the object returned from the
* evaluation of a method or object
*
*
* FUNCTION: acpi_ns_repair_CID
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* return_object_ptr - Pointer to the object returned from the
* evaluation of a method or object
*
*
* FUNCTION: acpi_ns_repair_HID
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* return_object_ptr - Pointer to the object returned from the
* evaluation of a method or object
*
*
* FUNCTION: acpi_ns_repair_TSS
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* return_object_ptr - Pointer to the object returned from the
* evaluation of a method or object
*
*
* FUNCTION: acpi_ns_repair_PSS
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* return_object_ptr - Pointer to the object returned from the
* evaluation of a method or object
*
*
* FUNCTION: acpi_ns_check_sorted_list
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* return_object - Pointer to the top-level returned object
* expected_count - Minimum length of each sub-package
* sort_index - Sub-package entry to sort on
*
* FUNCTION: acpi_ns_sort_list
*
- * PARAMETERS: Elements - Package object element list
- * Count - Element count for above
- * Index - Sort by which package element
+ * PARAMETERS: elements - Package object element list
+ * count - Element count for above
+ * index - Sort by which package element
* sort_direction - Ascending or Descending sort
*
* RETURN: None
*
* PARAMETERS: target_name - Ascii ACPI name to search for
* parent_node - Starting node where search will begin
- * Type - Object type to match
+ * type - Object type to match
* return_node - Where the matched Named obj is returned
*
* RETURN: Status
* FUNCTION: acpi_ns_search_parent_tree
*
* PARAMETERS: target_name - Ascii ACPI name to search for
- * Node - Starting node where search will begin
- * Type - Object type to match
+ * node - Starting node where search will begin
+ * type - Object type to match
* return_node - Where the matched Node is returned
*
* RETURN: Status
*
* PARAMETERS: target_name - Ascii ACPI name to search for (4 chars)
* walk_state - Current state of the walk
- * Node - Starting node where search will begin
+ * node - Starting node where search will begin
* interpreter_mode - Add names only in ACPI_MODE_LOAD_PASS_x.
* Otherwise,search only.
- * Type - Object type to match
- * Flags - Flags describing the search restrictions
+ * type - Object type to match
+ * flags - Flags describing the search restrictions
* return_node - Where the Node is returned
*
* RETURN: Status
*
* FUNCTION: acpi_ns_print_node_pathname
*
- * PARAMETERS: Node - Object
- * Message - Prefix message
+ * PARAMETERS: node - Object
+ * message - Prefix message
*
* DESCRIPTION: Print an object's full namespace pathname
* Manages allocation/freeing of a pathname buffer
*
* FUNCTION: acpi_ns_valid_root_prefix
*
- * PARAMETERS: Prefix - Character to be checked
+ * PARAMETERS: prefix - Character to be checked
*
* RETURN: TRUE if a valid prefix
*
*
* FUNCTION: acpi_ns_valid_path_separator
*
- * PARAMETERS: Sep - Character to be checked
+ * PARAMETERS: sep - Character to be checked
*
* RETURN: TRUE if a valid path separator
*
*
* FUNCTION: acpi_ns_get_type
*
- * PARAMETERS: Node - Parent Node to be examined
+ * PARAMETERS: node - Parent Node to be examined
*
* RETURN: Type field from Node whose handle is passed
*
*
* FUNCTION: acpi_ns_local
*
- * PARAMETERS: Type - A namespace object type
+ * PARAMETERS: type - A namespace object type
*
* RETURN: LOCAL if names must be found locally in objects of the
* passed type, 0 if enclosing scopes should be searched
*
* FUNCTION: acpi_ns_get_internal_name_length
*
- * PARAMETERS: Info - Info struct initialized with the
+ * PARAMETERS: info - Info struct initialized with the
* external name pointer.
*
* RETURN: None
*
* FUNCTION: acpi_ns_build_internal_name
*
- * PARAMETERS: Info - Info struct fully initialized
+ * PARAMETERS: info - Info struct fully initialized
*
* RETURN: Status
*
* FUNCTION: acpi_ns_internalize_name
*
* PARAMETERS: *external_name - External representation of name
- * **Converted Name - Where to return the resulting
+ * **Converted name - Where to return the resulting
* internal represention of the name
*
* RETURN: Status
*
* FUNCTION: acpi_ns_validate_handle
*
- * PARAMETERS: Handle - Handle to be validated and typecast to a
+ * PARAMETERS: handle - Handle to be validated and typecast to a
* namespace node.
*
* RETURN: A pointer to a namespace node
*
* FUNCTION: acpi_ns_opens_scope
*
- * PARAMETERS: Type - A valid namespace type
+ * PARAMETERS: type - A valid namespace type
*
* RETURN: NEWSCOPE if the passed type "opens a name scope" according
* to the ACPI specification, else 0
*
* FUNCTION: acpi_ns_get_node
*
- * PARAMETERS: *Pathname - Name to be found, in external (ASL) format. The
+ * PARAMETERS: *pathname - Name to be found, in external (ASL) format. The
* \ (backslash) and ^ (carat) prefixes, and the
* . (period) to separate segments are supported.
* prefix_node - Root of subtree to be searched, or NS_ALL for the
* root of the name space. If Name is fully
* qualified (first s8 is '\'), the passed value
* of Scope will not be accessed.
- * Flags - Used to indicate whether to perform upsearch or
+ * flags - Used to indicate whether to perform upsearch or
* not.
* return_node - Where the Node is returned
*
*
* FUNCTION: acpi_ns_get_next_node_typed
*
- * PARAMETERS: Type - Type of node to be searched for
+ * PARAMETERS: type - Type of node to be searched for
* parent_node - Parent node whose children we are
* getting
* child_node - Previous child that was found.
*
* FUNCTION: acpi_ns_walk_namespace
*
- * PARAMETERS: Type - acpi_object_type to search for
+ * PARAMETERS: type - acpi_object_type to search for
* start_node - Handle in namespace where search begins
* max_depth - Depth to which search is to reach
- * Flags - Whether to unlock the NS before invoking
+ * flags - Whether to unlock the NS before invoking
* the callback routine
* pre_order_visit - Called during tree pre-order visit
* when an object of "Type" is found
* post_order_visit - Called during tree post-order visit
* when an object of "Type" is found
- * Context - Passed to user function(s) above
+ * context - Passed to user function(s) above
* return_value - from the user_function if terminated
* early. Otherwise, returns NULL.
* RETURNS: Status
*
* FUNCTION: acpi_evaluate_object_typed
*
- * PARAMETERS: Handle - Object handle (optional)
- * Pathname - Object pathname (optional)
+ * PARAMETERS: handle - Object handle (optional)
+ * pathname - Object pathname (optional)
* external_params - List of parameters to pass to method,
* terminated by NULL. May be NULL
* if no parameters are being passed.
*
* FUNCTION: acpi_evaluate_object
*
- * PARAMETERS: Handle - Object handle (optional)
- * Pathname - Object pathname (optional)
+ * PARAMETERS: handle - Object handle (optional)
+ * pathname - Object pathname (optional)
* external_params - List of parameters to pass to method,
* terminated by NULL. May be NULL
* if no parameters are being passed.
*
* FUNCTION: acpi_ns_resolve_references
*
- * PARAMETERS: Info - Evaluation info block
+ * PARAMETERS: info - Evaluation info block
*
* RETURN: Info->return_object is replaced with the dereferenced object
*
*
* FUNCTION: acpi_walk_namespace
*
- * PARAMETERS: Type - acpi_object_type to search for
+ * PARAMETERS: type - acpi_object_type to search for
* start_object - Handle in namespace where search begins
* max_depth - Depth to which search is to reach
* pre_order_visit - Called during tree pre-order visit
* when an object of "Type" is found
* post_order_visit - Called during tree post-order visit
* when an object of "Type" is found
- * Context - Passed to user function(s) above
+ * context - Passed to user function(s) above
* return_value - Location where return value of
* user_function is put if terminated early
*
*
* PARAMETERS: HID - HID to search for. Can be NULL.
* user_function - Called when a matching object is found
- * Context - Passed to user function
+ * context - Passed to user function
* return_value - Location where return value of
* user_function is put if terminated early
*
* FUNCTION: acpi_attach_data
*
* PARAMETERS: obj_handle - Namespace node
- * Handler - Handler for this attachment
- * Data - Pointer to data to be attached
+ * handler - Handler for this attachment
+ * data - Pointer to data to be attached
*
* RETURN: Status
*
* FUNCTION: acpi_detach_data
*
* PARAMETERS: obj_handle - Namespace node handle
- * Handler - Handler used in call to acpi_attach_data
+ * handler - Handler used in call to acpi_attach_data
*
* RETURN: Status
*
* FUNCTION: acpi_get_data
*
* PARAMETERS: obj_handle - Namespace node
- * Handler - Handler used in call to attach_data
- * Data - Where the data is returned
+ * handler - Handler used in call to attach_data
+ * data - Where the data is returned
*
* RETURN: Status
*
*
* FUNCTION: acpi_get_handle
*
- * PARAMETERS: Parent - Object to search under (search scope).
- * Pathname - Pointer to an asciiz string containing the
+ * PARAMETERS: parent - Object to search under (search scope).
+ * pathname - Pointer to an asciiz string containing the
* name
* ret_handle - Where the return handle is returned
*
*
* FUNCTION: acpi_get_name
*
- * PARAMETERS: Handle - Handle to be converted to a pathname
+ * PARAMETERS: handle - Handle to be converted to a pathname
* name_type - Full pathname or single segment
- * Buffer - Buffer for returned path
+ * buffer - Buffer for returned path
*
* RETURN: Pointer to a string containing the fully qualified Name.
*
*
* FUNCTION: acpi_ns_copy_device_id
*
- * PARAMETERS: Dest - Pointer to the destination DEVICE_ID
- * Source - Pointer to the source DEVICE_ID
+ * PARAMETERS: dest - Pointer to the destination DEVICE_ID
+ * source - Pointer to the source DEVICE_ID
* string_area - Pointer to where to copy the dest string
*
* RETURN: Pointer to the next string area
*
* FUNCTION: acpi_get_object_info
*
- * PARAMETERS: Handle - Object Handle
+ * PARAMETERS: handle - Object Handle
* return_buffer - Where the info is returned
*
* RETURN: Status
*
* FUNCTION: acpi_install_method
*
- * PARAMETERS: Buffer - An ACPI table containing one control method
+ * PARAMETERS: buffer - An ACPI table containing one control method
*
* RETURN: Status
*
*
* FUNCTION: acpi_get_type
*
- * PARAMETERS: Handle - Handle of object whose type is desired
+ * PARAMETERS: handle - Handle of object whose type is desired
* ret_type - Where the type will be placed
*
* RETURN: Status
*
* FUNCTION: acpi_get_parent
*
- * PARAMETERS: Handle - Handle of object whose parent is desired
+ * PARAMETERS: handle - Handle of object whose parent is desired
* ret_handle - Where the parent handle will be placed
*
* RETURN: Status
*
* FUNCTION: acpi_get_next_object
*
- * PARAMETERS: Type - Type of object to be searched for
- * Parent - Parent object whose children we are getting
+ * PARAMETERS: type - Type of object to be searched for
+ * parent - Parent object whose children we are getting
* last_child - Previous child that was found.
* The NEXT child will be returned
* ret_handle - Where handle to the next object is placed
* FUNCTION: acpi_ps_get_next_namepath
*
* PARAMETERS: parser_state - Current parser state object
- * Arg - Where the namepath will be stored
+ * arg - Where the namepath will be stored
* arg_count - If the namepath points to a control method
* the method's argument is returned here.
* possible_method_call - Whether the namepath can possibly be the
*
* PARAMETERS: parser_state - Current parser state object
* arg_type - The argument type (AML_*_ARG)
- * Arg - Where the argument is returned
+ * arg - Where the argument is returned
*
* RETURN: None
*
arg = acpi_ps_alloc_op(AML_INT_BYTELIST_OP);
if (!arg) {
+ acpi_ps_free_op(field);
return_PTR(NULL);
}
} else {
arg = acpi_ps_alloc_op(AML_INT_NAMEPATH_OP);
if (!arg) {
+ acpi_ps_free_op(field);
return_PTR(NULL);
}
* PARAMETERS: walk_state - Current state
* aml_op_start - Begin of named Op in AML
* unnamed_op - Early Op (not a named Op)
- * Op - Returned Op
+ * op - Returned Op
*
* RETURN: Status
*
if (walk_state->op_info->flags & AML_CREATE) {
/*
- * Backup to beginning of create_xXXfield declaration
+ * Backup to beginning of create_XXXfield declaration
* body_length is unknown until we parse the body
*/
op->named.data = aml_op_start;
*
* PARAMETERS: walk_state - Current state
* aml_op_start - Op start in AML
- * Op - Current Op
+ * op - Current Op
*
* RETURN: Status
*
* FUNCTION: acpi_ps_complete_op
*
* PARAMETERS: walk_state - Current state
- * Op - Returned Op
- * Status - Parse status before complete Op
+ * op - Returned Op
+ * status - Parse status before complete Op
*
* RETURN: Status
*
* FUNCTION: acpi_ps_complete_final_op
*
* PARAMETERS: walk_state - Current state
- * Op - Current Op
- * Status - Current parse status before complete last
+ * op - Current Op
+ * status - Current parse status before complete last
* Op
*
* RETURN: Status
if (walk_state->op_info->flags & AML_CREATE) {
/*
- * Backup to beginning of create_xXXfield declaration (1 for
+ * Backup to beginning of create_XXXfield declaration (1 for
* Opcode)
*
* body_length is unknown until we parse the body
*
* FUNCTION: acpi_ps_get_opcode_info
*
- * PARAMETERS: Opcode - The AML opcode
+ * PARAMETERS: opcode - The AML opcode
*
* RETURN: A pointer to the info about the opcode.
*
*
* FUNCTION: acpi_ps_get_opcode_name
*
- * PARAMETERS: Opcode - The AML opcode
+ * PARAMETERS: opcode - The AML opcode
*
* RETURN: A pointer to the name of the opcode (ASCII String)
* Note: Never returns NULL.
*
* FUNCTION: acpi_ps_get_opcode_size
*
- * PARAMETERS: Opcode - An AML opcode
+ * PARAMETERS: opcode - An AML opcode
*
* RETURN: Size of the opcode, in bytes (1 or 2)
*
* FUNCTION: acpi_ps_complete_this_op
*
* PARAMETERS: walk_state - Current State
- * Op - Op to complete
+ * op - Op to complete
*
* RETURN: Status
*
* FUNCTION: acpi_ps_next_parse_state
*
* PARAMETERS: walk_state - Current state
- * Op - Current parse op
+ * op - Current parse op
* callback_status - Status from previous operation
*
* RETURN: Status
* FUNCTION: acpi_ps_init_scope
*
* PARAMETERS: parser_state - Current parser state object
- * Root - the Root Node of this new scope
+ * root - the Root Node of this new scope
*
* RETURN: Status
*
* FUNCTION: acpi_ps_push_scope
*
* PARAMETERS: parser_state - Current parser state object
- * Op - Current op to be pushed
+ * op - Current op to be pushed
* remaining_args - List of args remaining
* arg_count - Fixed or variable number of args
*
* FUNCTION: acpi_ps_pop_scope
*
* PARAMETERS: parser_state - Current parser state object
- * Op - Where the popped op is returned
+ * op - Where the popped op is returned
* arg_list - Where the popped "next argument" is
* returned
* arg_count - Count of objects in arg_list
*
* FUNCTION: acpi_ps_get_arg
*
- * PARAMETERS: Op - Get an argument for this op
- * Argn - Nth argument to get
+ * PARAMETERS: op - Get an argument for this op
+ * argn - Nth argument to get
*
* RETURN: The argument (as an Op object). NULL if argument does not exist
*
*
* FUNCTION: acpi_ps_append_arg
*
- * PARAMETERS: Op - Append an argument to this Op.
- * Arg - Argument Op to append
+ * PARAMETERS: op - Append an argument to this Op.
+ * arg - Argument Op to append
*
* RETURN: None.
*
*
* FUNCTION: acpi_ps_get_depth_next
*
- * PARAMETERS: Origin - Root of subtree to search
- * Op - Last (previous) Op that was found
+ * PARAMETERS: origin - Root of subtree to search
+ * op - Last (previous) Op that was found
*
* RETURN: Next Op found in the search.
*
*
* FUNCTION: acpi_ps_get_child
*
- * PARAMETERS: Op - Get the child of this Op
+ * PARAMETERS: op - Get the child of this Op
*
* RETURN: Child Op, Null if none is found.
*
*
* FUNCTION: acpi_ps_init_op
*
- * PARAMETERS: Op - A newly allocated Op object
- * Opcode - Opcode to store in the Op
+ * PARAMETERS: op - A newly allocated Op object
+ * opcode - Opcode to store in the Op
*
* RETURN: None
*
*
* FUNCTION: acpi_ps_alloc_op
*
- * PARAMETERS: Opcode - Opcode that will be stored in the new Op
+ * PARAMETERS: opcode - Opcode that will be stored in the new Op
*
* RETURN: Pointer to the new Op, null on failure
*
*
* FUNCTION: acpi_ps_free_op
*
- * PARAMETERS: Op - Op to be freed
+ * PARAMETERS: op - Op to be freed
*
* RETURN: None.
*
* PARAMETERS: method_name - Valid ACPI name string
* debug_level - Optional level mask. 0 to use default
* debug_layer - Optional layer mask. 0 to use default
- * Flags - bit 1: one shot(1) or persistent(0)
+ * flags - bit 1: one shot(1) or persistent(0)
*
* RETURN: Status
*
*
* FUNCTION: acpi_ps_start_trace
*
- * PARAMETERS: Info - Method info struct
+ * PARAMETERS: info - Method info struct
*
* RETURN: None
*
*
* FUNCTION: acpi_ps_stop_trace
*
- * PARAMETERS: Info - Method info struct
+ * PARAMETERS: info - Method info struct
*
* RETURN: None
*
*
* FUNCTION: acpi_ps_execute_method
*
- * PARAMETERS: Info - Method info block, contains:
- * Node - Method Node to execute
+ * PARAMETERS: info - Method info block, contains:
+ * node - Method Node to execute
* obj_desc - Method object
- * Parameters - List of parameters to pass to the method,
+ * parameters - List of parameters to pass to the method,
* terminated by NULL. Params itself may be
* NULL if no parameters are being passed.
* return_object - Where to put method's return value (if
*
* FUNCTION: acpi_ps_update_parameter_list
*
- * PARAMETERS: Info - See struct acpi_evaluate_info
+ * PARAMETERS: info - See struct acpi_evaluate_info
* (Used: parameter_type and Parameters)
- * Action - Add or Remove reference
+ * action - Add or Remove reference
*
* RETURN: Status
*
/* Revision ID */
- {ACPI_RSC_MOVE8, ACPI_RS_OFFSET(data.ext_address64.revision_iD),
- AML_OFFSET(ext_address64.revision_iD),
+ {ACPI_RSC_MOVE8, ACPI_RS_OFFSET(data.ext_address64.revision_ID),
+ AML_OFFSET(ext_address64.revision_ID),
1},
/*
* These fields are contiguous in both the source and destination:
AML_OFFSET(address.resource_type),
1},
- /* General Flags - Consume, Decode, min_fixed, max_fixed */
+ /* General flags - Consume, Decode, min_fixed, max_fixed */
{ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.address.producer_consumer),
AML_OFFSET(address.flags),
*
* FUNCTION: acpi_rs_get_address_common
*
- * PARAMETERS: Resource - Pointer to the internal resource struct
- * Aml - Pointer to the AML resource descriptor
+ * PARAMETERS: resource - Pointer to the internal resource struct
+ * aml - Pointer to the AML resource descriptor
*
* RETURN: TRUE if the resource_type field is OK, FALSE otherwise
*
*
* FUNCTION: acpi_rs_set_address_common
*
- * PARAMETERS: Aml - Pointer to the AML resource descriptor
- * Resource - Pointer to the internal resource struct
+ * PARAMETERS: aml - Pointer to the AML resource descriptor
+ * resource - Pointer to the internal resource struct
*
* RETURN: None
*
*
* FUNCTION: acpi_rs_get_aml_length
*
- * PARAMETERS: Resource - Pointer to the resource linked list
+ * PARAMETERS: resource - Pointer to the resource linked list
* size_needed - Where the required size is returned
*
* RETURN: Status
*
* FUNCTION: acpi_rs_create_pci_routing_table
*
- * PARAMETERS: package_object - Pointer to a union acpi_operand_object
- * package
+ * PARAMETERS: package_object - Pointer to a package containing one
+ * of more ACPI_OPERAND_OBJECTs
* output_buffer - Pointer to the user's buffer
*
* RETURN: Status AE_OK if okay, else a valid acpi_status code.
* AE_BUFFER_OVERFLOW and output_buffer->Length will point
* to the size buffer needed.
*
- * DESCRIPTION: Takes the union acpi_operand_object package and creates a
+ * DESCRIPTION: Takes the union acpi_operand_object package and creates a
* linked list of PCI interrupt descriptions
*
* NOTE: It is the caller's responsibility to ensure that the start of the
*
* FUNCTION: acpi_rs_dump_address_common
*
- * PARAMETERS: Resource - Pointer to an internal resource descriptor
+ * PARAMETERS: resource - Pointer to an internal resource descriptor
*
* RETURN: None
*
*
* FUNCTION: acpi_rs_out*
*
- * PARAMETERS: Title - Name of the resource field
- * Value - Value of the resource field
+ * PARAMETERS: title - Name of the resource field
+ * value - Value of the resource field
*
* RETURN: None
*
*
* FUNCTION: acpi_rs_dump*List
*
- * PARAMETERS: Length - Number of elements in the list
- * Data - Start of the list
+ * PARAMETERS: length - Number of elements in the list
+ * data - Start of the list
*
* RETURN: None
*
*
* FUNCTION: acpi_rs_convert_resources_to_aml
*
- * PARAMETERS: Resource - Pointer to the resource linked list
+ * PARAMETERS: resource - Pointer to the resource linked list
* aml_size_needed - Calculated size of the byte stream
* needed from calling acpi_rs_get_aml_length()
* The size of the output_buffer is
*
* FUNCTION: acpi_rs_convert_aml_to_resource
*
- * PARAMETERS: Resource - Pointer to the resource descriptor
- * Aml - Where the AML descriptor is returned
- * Info - Pointer to appropriate conversion table
+ * PARAMETERS: resource - Pointer to the resource descriptor
+ * aml - Where the AML descriptor is returned
+ * info - Pointer to appropriate conversion table
*
* RETURN: Status
*
case ACPI_RSC_EXIT_NE:
/*
- * Control - Exit conversion if not equal
+ * control - Exit conversion if not equal
*/
switch (info->resource_offset) {
case ACPI_RSC_COMPARE_AML_LENGTH:
*
* FUNCTION: acpi_rs_convert_resource_to_aml
*
- * PARAMETERS: Resource - Pointer to the resource descriptor
- * Aml - Where the AML descriptor is returned
- * Info - Pointer to appropriate conversion table
+ * PARAMETERS: resource - Pointer to the resource descriptor
+ * aml - Where the AML descriptor is returned
+ * info - Pointer to appropriate conversion table
*
* RETURN: Status
*
case ACPI_RSC_EXIT_LE:
/*
- * Control - Exit conversion if less than or equal
+ * control - Exit conversion if less than or equal
*/
if (item_count <= info->value) {
goto exit;
case ACPI_RSC_EXIT_NE:
/*
- * Control - Exit conversion if not equal
+ * control - Exit conversion if not equal
*/
switch (COMPARE_OPCODE(info)) {
case ACPI_RSC_COMPARE_VALUE:
case ACPI_RSC_EXIT_EQ:
/*
- * Control - Exit conversion if equal
+ * control - Exit conversion if equal
*/
if (*ACPI_ADD_PTR(u8, resource,
COMPARE_TARGET(info)) ==
#if 0
/* Previous resource validations */
-if (aml->ext_address64.revision_iD != AML_RESOURCE_EXTENDED_ADDRESS_REVISION) {
+if (aml->ext_address64.revision_ID != AML_RESOURCE_EXTENDED_ADDRESS_REVISION) {
return_ACPI_STATUS(AE_SUPPORT);
}
*
* FUNCTION: acpi_rs_decode_bitmask
*
- * PARAMETERS: Mask - Bitmask to decode
- * List - Where the converted list is returned
+ * PARAMETERS: mask - Bitmask to decode
+ * list - Where the converted list is returned
*
* RETURN: Count of bits set (length of list)
*
*
* FUNCTION: acpi_rs_encode_bitmask
*
- * PARAMETERS: List - List of values to encode
- * Count - Length of list
+ * PARAMETERS: list - List of values to encode
+ * count - Length of list
*
* RETURN: Encoded bitmask
*
*
* FUNCTION: acpi_rs_move_data
*
- * PARAMETERS: Destination - Pointer to the destination descriptor
- * Source - Pointer to the source descriptor
+ * PARAMETERS: destination - Pointer to the destination descriptor
+ * source - Pointer to the source descriptor
* item_count - How many items to move
* move_type - Byte width
*
*
* PARAMETERS: total_length - Length of the AML descriptor, including
* the header and length fields.
- * Aml - Pointer to the raw AML descriptor
+ * aml - Pointer to the raw AML descriptor
*
* RETURN: None
*
* PARAMETERS: descriptor_type - Byte to be inserted as the type
* total_length - Length of the AML descriptor, including
* the header and length fields.
- * Aml - Pointer to the raw AML descriptor
+ * aml - Pointer to the raw AML descriptor
*
* RETURN: None
*
*
* FUNCTION: acpi_rs_strcpy
*
- * PARAMETERS: Destination - Pointer to the destination string
- * Source - Pointer to the source string
+ * PARAMETERS: destination - Pointer to the destination string
+ * source - Pointer to the source string
*
* RETURN: String length, including NULL terminator
*
* minimum_length - Minimum length of the descriptor (minus
* any optional fields)
* resource_source - Where the resource_source is returned
- * Aml - Pointer to the raw AML descriptor
+ * aml - Pointer to the raw AML descriptor
* string_ptr - (optional) where to store the actual
* resource_source string
*
*
* FUNCTION: acpi_rs_set_resource_source
*
- * PARAMETERS: Aml - Pointer to the raw AML descriptor
+ * PARAMETERS: aml - Pointer to the raw AML descriptor
* minimum_length - Minimum length of the descriptor (minus
* any optional fields)
* resource_source - Internal resource_source
*
* FUNCTION: acpi_rs_get_prt_method_data
*
- * PARAMETERS: Node - Device node
+ * PARAMETERS: node - Device node
* ret_buffer - Pointer to a buffer structure for the
* results
*
*
* FUNCTION: acpi_rs_get_crs_method_data
*
- * PARAMETERS: Node - Device node
+ * PARAMETERS: node - Device node
* ret_buffer - Pointer to a buffer structure for the
* results
*
*/
status = acpi_rs_create_resource_list(obj_desc, ret_buffer);
- /* On exit, we must delete the object returned by evaluate_object */
+ /* On exit, we must delete the object returned by evaluateObject */
acpi_ut_remove_reference(obj_desc);
return_ACPI_STATUS(status);
*
* FUNCTION: acpi_rs_get_prs_method_data
*
- * PARAMETERS: Node - Device node
+ * PARAMETERS: node - Device node
* ret_buffer - Pointer to a buffer structure for the
* results
*
*/
status = acpi_rs_create_resource_list(obj_desc, ret_buffer);
- /* On exit, we must delete the object returned by evaluate_object */
+ /* On exit, we must delete the object returned by evaluateObject */
acpi_ut_remove_reference(obj_desc);
return_ACPI_STATUS(status);
*
* FUNCTION: acpi_rs_get_aei_method_data
*
- * PARAMETERS: Node - Device node
+ * PARAMETERS: node - Device node
* ret_buffer - Pointer to a buffer structure for the
* results
*
*/
status = acpi_rs_create_resource_list(obj_desc, ret_buffer);
- /* On exit, we must delete the object returned by evaluate_object */
+ /* On exit, we must delete the object returned by evaluateObject */
acpi_ut_remove_reference(obj_desc);
return_ACPI_STATUS(status);
*
* FUNCTION: acpi_rs_get_method_data
*
- * PARAMETERS: Handle - Handle to the containing object
- * Path - Path to method, relative to Handle
+ * PARAMETERS: handle - Handle to the containing object
+ * path - Path to method, relative to Handle
* ret_buffer - Pointer to a buffer structure for the
* results
*
*
* FUNCTION: acpi_rs_set_srs_method_data
*
- * PARAMETERS: Node - Device node
+ * PARAMETERS: node - Device node
* in_buffer - Pointer to a buffer structure of the
* parameter
*
* FUNCTION: acpi_rs_validate_parameters
*
* PARAMETERS: device_handle - Handle to a device
- * Buffer - Pointer to a data buffer
+ * buffer - Pointer to a data buffer
* return_node - Pointer to where the device node is returned
*
* RETURN: Status
*
* FUNCTION: acpi_resource_to_address64
*
- * PARAMETERS: Resource - Pointer to a resource
- * Out - Pointer to the users's return buffer
+ * PARAMETERS: resource - Pointer to a resource
+ * out - Pointer to the users's return buffer
* (a struct acpi_resource_address64)
*
* RETURN: Status
* FUNCTION: acpi_get_vendor_resource
*
* PARAMETERS: device_handle - Handle for the parent device object
- * Name - Method name for the parent resource
+ * name - Method name for the parent resource
* (METHOD_NAME__CRS or METHOD_NAME__PRS)
- * Uuid - Pointer to the UUID to be matched.
+ * uuid - Pointer to the UUID to be matched.
* includes both subtype and 16-byte UUID
* ret_buffer - Where the vendor resource is returned
*
*
* PARAMETERS: device_handle - Handle to the device object for the
* device we are querying
- * Name - Method name of the resources we want.
+ * name - Method name of the resources we want.
* (METHOD_NAME__CRS, METHOD_NAME__PRS, or
* METHOD_NAME__AEI)
* user_function - Called for each resource
- * Context - Passed to user_function
+ * context - Passed to user_function
*
* RETURN: Status
*
ACPI_MODULE_NAME("tbfadt")
/* Local prototypes */
-static ACPI_INLINE void
+static void
acpi_tb_init_generic_address(struct acpi_generic_address *generic_address,
- u8 space_id, u8 byte_width, u64 address);
+ u8 space_id,
+ u8 byte_width, u64 address, char *register_name);
static void acpi_tb_convert_fadt(void);
*
* PARAMETERS: generic_address - GAS struct to be initialized
* byte_width - Width of this register
- * Address - Address of the register
+ * address - Address of the register
*
* RETURN: None
*
*
******************************************************************************/
-static ACPI_INLINE void
+static void
acpi_tb_init_generic_address(struct acpi_generic_address *generic_address,
- u8 space_id, u8 byte_width, u64 address)
+ u8 space_id,
+ u8 byte_width, u64 address, char *register_name)
{
+ u8 bit_width;
+
+ /* Bit width field in the GAS is only one byte long, 255 max */
+
+ bit_width = (u8)(byte_width * 8);
+
+ if (byte_width > 31) { /* (31*8)=248 */
+ ACPI_ERROR((AE_INFO,
+ "%s - 32-bit FADT register is too long (%u bytes, %u bits) "
+ "to convert to GAS struct - 255 bits max, truncating",
+ register_name, byte_width, (byte_width * 8)));
+
+ bit_width = 255;
+ }
/*
* The 64-bit Address field is non-aligned in the byte packed
/* All other fields are byte-wide */
generic_address->space_id = space_id;
- generic_address->bit_width = (u8)ACPI_MUL_8(byte_width);
+ generic_address->bit_width = bit_width;
generic_address->bit_offset = 0;
generic_address->access_width = 0; /* Access width ANY */
}
*
* FUNCTION: acpi_tb_create_local_fadt
*
- * PARAMETERS: Table - Pointer to BIOS FADT
- * Length - Length of the table
+ * PARAMETERS: table - Pointer to BIOS FADT
+ * length - Length of the table
*
* RETURN: None
*
* a warning.
*/
if (length > sizeof(struct acpi_table_fadt)) {
- ACPI_WARNING((AE_INFO,
- "FADT (revision %u) is longer than ACPI 5.0 version, "
- "truncating length %u to %u",
- table->revision, length,
- (u32)sizeof(struct acpi_table_fadt)));
+ ACPI_BIOS_WARNING((AE_INFO,
+ "FADT (revision %u) is longer than ACPI 5.0 version, "
+ "truncating length %u to %u",
+ table->revision, length,
+ (u32)sizeof(struct acpi_table_fadt)));
}
/* Clear the entire local FADT */
* they must match.
*/
if (address64->address && address32 &&
- (address64->address != (u64) address32)) {
- ACPI_ERROR((AE_INFO,
- "32/64X address mismatch in %s: 0x%8.8X/0x%8.8X%8.8X, using 32",
- fadt_info_table[i].name, address32,
- ACPI_FORMAT_UINT64(address64->address)));
+ (address64->address != (u64)address32)) {
+ ACPI_BIOS_ERROR((AE_INFO,
+ "32/64X address mismatch in FADT/%s: "
+ "0x%8.8X/0x%8.8X%8.8X, using 32",
+ fadt_info_table[i].name, address32,
+ ACPI_FORMAT_UINT64(address64->
+ address)));
}
/* Always use 32-bit address if it is valid (non-null) */
&acpi_gbl_FADT,
fadt_info_table
[i].length),
- (u64) address32);
+ (u64) address32,
+ fadt_info_table[i].name);
}
}
}
*
* FUNCTION: acpi_tb_validate_fadt
*
- * PARAMETERS: Table - Pointer to the FADT to be validated
+ * PARAMETERS: table - Pointer to the FADT to be validated
*
* RETURN: None
*
* DSDT/X_DSDT) would indicate the presence of two FACS or two DSDT tables.
*/
if (acpi_gbl_FADT.facs &&
- (acpi_gbl_FADT.Xfacs != (u64) acpi_gbl_FADT.facs)) {
- ACPI_WARNING((AE_INFO,
- "32/64X FACS address mismatch in FADT - "
- "0x%8.8X/0x%8.8X%8.8X, using 32",
- acpi_gbl_FADT.facs,
- ACPI_FORMAT_UINT64(acpi_gbl_FADT.Xfacs)));
-
- acpi_gbl_FADT.Xfacs = (u64) acpi_gbl_FADT.facs;
+ (acpi_gbl_FADT.Xfacs != (u64)acpi_gbl_FADT.facs)) {
+ ACPI_BIOS_WARNING((AE_INFO,
+ "32/64X FACS address mismatch in FADT - "
+ "0x%8.8X/0x%8.8X%8.8X, using 32",
+ acpi_gbl_FADT.facs,
+ ACPI_FORMAT_UINT64(acpi_gbl_FADT.Xfacs)));
+
+ acpi_gbl_FADT.Xfacs = (u64)acpi_gbl_FADT.facs;
}
if (acpi_gbl_FADT.dsdt &&
- (acpi_gbl_FADT.Xdsdt != (u64) acpi_gbl_FADT.dsdt)) {
- ACPI_WARNING((AE_INFO,
- "32/64X DSDT address mismatch in FADT - "
- "0x%8.8X/0x%8.8X%8.8X, using 32",
- acpi_gbl_FADT.dsdt,
- ACPI_FORMAT_UINT64(acpi_gbl_FADT.Xdsdt)));
-
- acpi_gbl_FADT.Xdsdt = (u64) acpi_gbl_FADT.dsdt;
+ (acpi_gbl_FADT.Xdsdt != (u64)acpi_gbl_FADT.dsdt)) {
+ ACPI_BIOS_WARNING((AE_INFO,
+ "32/64X DSDT address mismatch in FADT - "
+ "0x%8.8X/0x%8.8X%8.8X, using 32",
+ acpi_gbl_FADT.dsdt,
+ ACPI_FORMAT_UINT64(acpi_gbl_FADT.Xdsdt)));
+
+ acpi_gbl_FADT.Xdsdt = (u64)acpi_gbl_FADT.dsdt;
}
/* If Hardware Reduced flag is set, we are all done */
*/
if (address64->address &&
(address64->bit_width != ACPI_MUL_8(length))) {
- ACPI_WARNING((AE_INFO,
- "32/64X length mismatch in %s: %u/%u",
- name, ACPI_MUL_8(length),
- address64->bit_width));
+ ACPI_BIOS_WARNING((AE_INFO,
+ "32/64X length mismatch in FADT/%s: %u/%u",
+ name, ACPI_MUL_8(length),
+ address64->bit_width));
}
if (fadt_info_table[i].type & ACPI_FADT_REQUIRED) {
* Both the address and length must be non-zero.
*/
if (!address64->address || !length) {
- ACPI_ERROR((AE_INFO,
- "Required field %s has zero address and/or length:"
- " 0x%8.8X%8.8X/0x%X",
- name,
- ACPI_FORMAT_UINT64(address64->
- address),
- length));
+ ACPI_BIOS_ERROR((AE_INFO,
+ "Required FADT field %s has zero address and/or length: "
+ "0x%8.8X%8.8X/0x%X",
+ name,
+ ACPI_FORMAT_UINT64(address64->
+ address),
+ length));
}
} else if (fadt_info_table[i].type & ACPI_FADT_SEPARATE_LENGTH) {
/*
- * Field is optional (PM2Control, GPE0, GPE1) AND has its own
+ * Field is optional (Pm2_control, GPE0, GPE1) AND has its own
* length field. If present, both the address and length must
* be valid.
*/
if ((address64->address && !length) ||
(!address64->address && length)) {
- ACPI_WARNING((AE_INFO,
- "Optional field %s has zero address or length: "
- "0x%8.8X%8.8X/0x%X",
- name,
- ACPI_FORMAT_UINT64(address64->
- address),
- length));
+ ACPI_BIOS_WARNING((AE_INFO,
+ "Optional FADT field %s has zero address or length: "
+ "0x%8.8X%8.8X/0x%X",
+ name,
+ ACPI_FORMAT_UINT64
+ (address64->address),
+ length));
}
}
}
(fadt_info_table[i].default_length > 0) &&
(fadt_info_table[i].default_length !=
target64->bit_width)) {
- ACPI_WARNING((AE_INFO,
- "Invalid length for %s: %u, using default %u",
- fadt_info_table[i].name,
- target64->bit_width,
- fadt_info_table[i].
- default_length));
+ ACPI_BIOS_WARNING((AE_INFO,
+ "Invalid length for FADT/%s: %u, using default %u",
+ fadt_info_table[i].name,
+ target64->bit_width,
+ fadt_info_table[i].
+ default_length));
/* Incorrect size, set width to the default */
source64->address +
(fadt_pm_info_table[i].
register_num *
- pm1_register_byte_width));
+ pm1_register_byte_width),
+ "PmRegisters");
}
}
}
*
* FUNCTION: acpi_tb_find_table
*
- * PARAMETERS: Signature - String with ACPI table signature
+ * PARAMETERS: signature - String with ACPI table signature
* oem_id - String with the table OEM ID
* oem_table_id - String with the OEM Table ID
* table_index - Where the table index is returned
if ((table_desc->pointer->signature[0] != 0x00) &&
(!ACPI_COMPARE_NAME(table_desc->pointer->signature, ACPI_SIG_SSDT))
&& (ACPI_STRNCMP(table_desc->pointer->signature, "OEM", 3))) {
- ACPI_ERROR((AE_INFO,
- "Table has invalid signature [%4.4s] (0x%8.8X), must be SSDT or OEMx",
- acpi_ut_valid_acpi_name(*(u32 *)table_desc->
- pointer->
- signature) ? table_desc->
- pointer->signature : "????",
- *(u32 *)table_desc->pointer->signature));
+ ACPI_BIOS_ERROR((AE_INFO,
+ "Table has invalid signature [%4.4s] (0x%8.8X), "
+ "must be SSDT or OEMx",
+ acpi_ut_valid_acpi_name(*(u32 *)table_desc->
+ pointer->
+ signature) ?
+ table_desc->pointer->signature : "????",
+ *(u32 *)table_desc->pointer->signature));
return_ACPI_STATUS(AE_BAD_SIGNATURE);
}
*
* FUNCTION: acpi_tb_store_table
*
- * PARAMETERS: Address - Table address
- * Table - Table header
- * Length - Table length
- * Flags - flags
+ * PARAMETERS: address - Table address
+ * table - Table header
+ * length - Table length
+ * flags - flags
*
* RETURN: Status and table index.
*
*
* FUNCTION: acpi_tb_fix_string
*
- * PARAMETERS: String - String to be repaired
- * Length - Maximum length
+ * PARAMETERS: string - String to be repaired
+ * length - Maximum length
*
* RETURN: None
*
* FUNCTION: acpi_tb_cleanup_table_header
*
* PARAMETERS: out_header - Where the cleaned header is returned
- * Header - Input ACPI table header
+ * header - Input ACPI table header
*
* RETURN: Returns the cleaned header in out_header
*
*
* FUNCTION: acpi_tb_print_table_header
*
- * PARAMETERS: Address - Table physical address
- * Header - Table header
+ * PARAMETERS: address - Table physical address
+ * header - Table header
*
* RETURN: None
*
*
* FUNCTION: acpi_tb_validate_checksum
*
- * PARAMETERS: Table - ACPI table to verify
- * Length - Length of entire table
+ * PARAMETERS: table - ACPI table to verify
+ * length - Length of entire table
*
* RETURN: Status
*
/* Checksum ok? (should be zero) */
if (checksum) {
- ACPI_WARNING((AE_INFO,
- "Incorrect checksum in table [%4.4s] - 0x%2.2X, should be 0x%2.2X",
- table->signature, table->checksum,
- (u8) (table->checksum - checksum)));
+ ACPI_BIOS_WARNING((AE_INFO,
+ "Incorrect checksum in table [%4.4s] - 0x%2.2X, "
+ "should be 0x%2.2X",
+ table->signature, table->checksum,
+ (u8)(table->checksum - checksum)));
#if (ACPI_CHECKSUM_ABORT)
*
* FUNCTION: acpi_tb_checksum
*
- * PARAMETERS: Buffer - Pointer to memory region to be checked
- * Length - Length of this memory region
+ * PARAMETERS: buffer - Pointer to memory region to be checked
+ * length - Length of this memory region
*
* RETURN: Checksum (u8)
*
if (acpi_gbl_original_dsdt_header.length != acpi_gbl_DSDT->length ||
acpi_gbl_original_dsdt_header.checksum != acpi_gbl_DSDT->checksum) {
- ACPI_ERROR((AE_INFO,
- "The DSDT has been corrupted or replaced - old, new headers below"));
+ ACPI_BIOS_ERROR((AE_INFO,
+ "The DSDT has been corrupted or replaced - "
+ "old, new headers below"));
acpi_tb_print_table_header(0, &acpi_gbl_original_dsdt_header);
acpi_tb_print_table_header(0, acpi_gbl_DSDT);
*
* FUNCTION: acpi_tb_install_table
*
- * PARAMETERS: Address - Physical address of DSDT or FACS
- * Signature - Table signature, NULL if no need to
+ * PARAMETERS: address - Physical address of DSDT or FACS
+ * signature - Table signature, NULL if no need to
* match
* table_index - Index into root table array
*
/* If a particular signature is expected (DSDT/FACS), it must match */
if (signature && !ACPI_COMPARE_NAME(table->signature, signature)) {
- ACPI_ERROR((AE_INFO,
- "Invalid signature 0x%X for ACPI table, expected [%s]",
- *ACPI_CAST_PTR(u32, table->signature), signature));
+ ACPI_BIOS_ERROR((AE_INFO,
+ "Invalid signature 0x%X for ACPI table, expected [%s]",
+ *ACPI_CAST_PTR(u32, table->signature),
+ signature));
goto unmap_and_exit;
}
/* Will truncate 64-bit address to 32 bits, issue warning */
- ACPI_WARNING((AE_INFO,
- "64-bit Physical Address in XSDT is too large (0x%8.8X%8.8X),"
- " truncating",
- ACPI_FORMAT_UINT64(address64)));
+ ACPI_BIOS_WARNING((AE_INFO,
+ "64-bit Physical Address in XSDT is too large (0x%8.8X%8.8X),"
+ " truncating",
+ ACPI_FORMAT_UINT64(address64)));
}
#endif
return ((acpi_physical_address) (address64));
*
* FUNCTION: acpi_tb_parse_root_table
*
- * PARAMETERS: Rsdp - Pointer to the RSDP
+ * PARAMETERS: rsdp - Pointer to the RSDP
*
* RETURN: Status
*
acpi_os_unmap_memory(table, sizeof(struct acpi_table_header));
if (length < sizeof(struct acpi_table_header)) {
- ACPI_ERROR((AE_INFO, "Invalid length 0x%X in RSDT/XSDT",
- length));
+ ACPI_BIOS_ERROR((AE_INFO,
+ "Invalid table length 0x%X in RSDT/XSDT",
+ length));
return_ACPI_STATUS(AE_INVALID_TABLE_LENGTH);
}
/******************************************************************************
*
- * Module Name: tbxface - Public interfaces to the ACPI subsystem
- * ACPI table oriented interfaces
+ * Module Name: tbxface - ACPI table oriented external interfaces
*
*****************************************************************************/
#define _COMPONENT ACPI_TABLES
ACPI_MODULE_NAME("tbxface")
-/* Local prototypes */
-static acpi_status acpi_tb_load_namespace(void);
-
-static int no_auto_ssdt;
-
/*******************************************************************************
*
* FUNCTION: acpi_allocate_root_table
*
* RETURN: Status
*
- * DESCRIPTION: Allocate a root table array. Used by i_aSL compiler and
+ * DESCRIPTION: Allocate a root table array. Used by iASL compiler and
* acpi_initialize_tables.
*
******************************************************************************/
-
acpi_status acpi_allocate_root_table(u32 initial_table_count)
{
return_ACPI_STATUS(AE_OK);
}
-/*******************************************************************************
- *
- * FUNCTION: acpi_load_table
- *
- * PARAMETERS: table_ptr - pointer to a buffer containing the entire
- * table to be loaded
- *
- * RETURN: Status
- *
- * DESCRIPTION: This function is called to load a table from the caller's
- * buffer. The buffer must contain an entire ACPI Table including
- * a valid header. The header fields will be verified, and if it
- * is determined that the table is invalid, the call will fail.
- *
- ******************************************************************************/
-acpi_status acpi_load_table(struct acpi_table_header *table_ptr)
-{
- acpi_status status;
- u32 table_index;
- struct acpi_table_desc table_desc;
-
- if (!table_ptr)
- return AE_BAD_PARAMETER;
-
- ACPI_MEMSET(&table_desc, 0, sizeof(struct acpi_table_desc));
- table_desc.pointer = table_ptr;
- table_desc.length = table_ptr->length;
- table_desc.flags = ACPI_TABLE_ORIGIN_UNKNOWN;
-
- /*
- * Install the new table into the local data structures
- */
- status = acpi_tb_add_table(&table_desc, &table_index);
- if (ACPI_FAILURE(status)) {
- return status;
- }
- status = acpi_ns_load_table(table_index, acpi_gbl_root_node);
- return status;
-}
-
-ACPI_EXPORT_SYMBOL(acpi_load_table)
-
/*******************************************************************************
*
* FUNCTION: acpi_get_table_header
*
- * PARAMETERS: Signature - ACPI signature of needed table
- * Instance - Which instance (for SSDTs)
+ * PARAMETERS: signature - ACPI signature of needed table
+ * instance - Which instance (for SSDTs)
* out_table_header - The pointer to the table header to fill
*
* RETURN: Status and pointer to mapped table header
*
* FUNCTION: acpi_get_table_with_size
*
- * PARAMETERS: Signature - ACPI signature of needed table
- * Instance - Which instance (for SSDTs)
+ * PARAMETERS: signature - ACPI signature of needed table
+ * instance - Which instance (for SSDTs)
* out_table - Where the pointer to the table is returned
*
* RETURN: Status and pointer to table
* FUNCTION: acpi_get_table_by_index
*
* PARAMETERS: table_index - Table index
- * Table - Where the pointer to the table is returned
+ * table - Where the pointer to the table is returned
*
* RETURN: Status and pointer to the table
*
ACPI_EXPORT_SYMBOL(acpi_get_table_by_index)
-/*******************************************************************************
- *
- * FUNCTION: acpi_tb_load_namespace
- *
- * PARAMETERS: None
- *
- * RETURN: Status
- *
- * DESCRIPTION: Load the namespace from the DSDT and all SSDTs/PSDTs found in
- * the RSDT/XSDT.
- *
- ******************************************************************************/
-static acpi_status acpi_tb_load_namespace(void)
-{
- acpi_status status;
- u32 i;
- struct acpi_table_header *new_dsdt;
-
- ACPI_FUNCTION_TRACE(tb_load_namespace);
-
- (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
-
- /*
- * Load the namespace. The DSDT is required, but any SSDT and
- * PSDT tables are optional. Verify the DSDT.
- */
- if (!acpi_gbl_root_table_list.current_table_count ||
- !ACPI_COMPARE_NAME(&
- (acpi_gbl_root_table_list.
- tables[ACPI_TABLE_INDEX_DSDT].signature),
- ACPI_SIG_DSDT)
- ||
- ACPI_FAILURE(acpi_tb_verify_table
- (&acpi_gbl_root_table_list.
- tables[ACPI_TABLE_INDEX_DSDT]))) {
- status = AE_NO_ACPI_TABLES;
- goto unlock_and_exit;
- }
-
- /*
- * Save the DSDT pointer for simple access. This is the mapped memory
- * address. We must take care here because the address of the .Tables
- * array can change dynamically as tables are loaded at run-time. Note:
- * .Pointer field is not validated until after call to acpi_tb_verify_table.
- */
- acpi_gbl_DSDT =
- acpi_gbl_root_table_list.tables[ACPI_TABLE_INDEX_DSDT].pointer;
-
- /*
- * Optionally copy the entire DSDT to local memory (instead of simply
- * mapping it.) There are some BIOSs that corrupt or replace the original
- * DSDT, creating the need for this option. Default is FALSE, do not copy
- * the DSDT.
- */
- if (acpi_gbl_copy_dsdt_locally) {
- new_dsdt = acpi_tb_copy_dsdt(ACPI_TABLE_INDEX_DSDT);
- if (new_dsdt) {
- acpi_gbl_DSDT = new_dsdt;
- }
- }
-
- /*
- * Save the original DSDT header for detection of table corruption
- * and/or replacement of the DSDT from outside the OS.
- */
- ACPI_MEMCPY(&acpi_gbl_original_dsdt_header, acpi_gbl_DSDT,
- sizeof(struct acpi_table_header));
-
- (void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
-
- /* Load and parse tables */
-
- status = acpi_ns_load_table(ACPI_TABLE_INDEX_DSDT, acpi_gbl_root_node);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
- /* Load any SSDT or PSDT tables. Note: Loop leaves tables locked */
-
- (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
- for (i = 0; i < acpi_gbl_root_table_list.current_table_count; ++i) {
- if ((!ACPI_COMPARE_NAME
- (&(acpi_gbl_root_table_list.tables[i].signature),
- ACPI_SIG_SSDT)
- &&
- !ACPI_COMPARE_NAME(&
- (acpi_gbl_root_table_list.tables[i].
- signature), ACPI_SIG_PSDT))
- ||
- ACPI_FAILURE(acpi_tb_verify_table
- (&acpi_gbl_root_table_list.tables[i]))) {
- continue;
- }
-
- if (no_auto_ssdt) {
- printk(KERN_WARNING "ACPI: SSDT ignored due to \"acpi_no_auto_ssdt\"\n");
- continue;
- }
-
- /* Ignore errors while loading tables, get as many as possible */
-
- (void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
- (void)acpi_ns_load_table(i, acpi_gbl_root_node);
- (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
- }
-
- ACPI_DEBUG_PRINT((ACPI_DB_INIT, "ACPI Tables successfully acquired\n"));
-
- unlock_and_exit:
- (void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
- return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_load_tables
- *
- * PARAMETERS: None
- *
- * RETURN: Status
- *
- * DESCRIPTION: Load the ACPI tables from the RSDT/XSDT
- *
- ******************************************************************************/
-
-acpi_status acpi_load_tables(void)
-{
- acpi_status status;
-
- ACPI_FUNCTION_TRACE(acpi_load_tables);
-
- /* Load the namespace from the tables */
-
- status = acpi_tb_load_namespace();
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status,
- "While loading namespace from ACPI tables"));
- }
-
- return_ACPI_STATUS(status);
-}
-
-ACPI_EXPORT_SYMBOL(acpi_load_tables)
-
/*******************************************************************************
*
* FUNCTION: acpi_install_table_handler
*
- * PARAMETERS: Handler - Table event handler
- * Context - Value passed to the handler on each event
+ * PARAMETERS: handler - Table event handler
+ * context - Value passed to the handler on each event
*
* RETURN: Status
*
*
* FUNCTION: acpi_remove_table_handler
*
- * PARAMETERS: Handler - Table event handler that was installed
+ * PARAMETERS: handler - Table event handler that was installed
* previously.
*
* RETURN: Status
}
ACPI_EXPORT_SYMBOL(acpi_remove_table_handler)
-
-
-static int __init acpi_no_auto_ssdt_setup(char *s) {
-
- printk(KERN_NOTICE "ACPI: SSDT auto-load disabled\n");
-
- no_auto_ssdt = 1;
-
- return 1;
-}
-
-__setup("acpi_no_auto_ssdt", acpi_no_auto_ssdt_setup);
--- /dev/null
+/******************************************************************************
+ *
+ * Module Name: tbxfload - Table load/unload external interfaces
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2012, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <linux/export.h>
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acnamesp.h"
+#include "actables.h"
+
+#define _COMPONENT ACPI_TABLES
+ACPI_MODULE_NAME("tbxfload")
+
+/* Local prototypes */
+static acpi_status acpi_tb_load_namespace(void);
+
+static int no_auto_ssdt;
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_load_tables
+ *
+ * PARAMETERS: None
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Load the ACPI tables from the RSDT/XSDT
+ *
+ ******************************************************************************/
+
+acpi_status acpi_load_tables(void)
+{
+ acpi_status status;
+
+ ACPI_FUNCTION_TRACE(acpi_load_tables);
+
+ /* Load the namespace from the tables */
+
+ status = acpi_tb_load_namespace();
+ if (ACPI_FAILURE(status)) {
+ ACPI_EXCEPTION((AE_INFO, status,
+ "While loading namespace from ACPI tables"));
+ }
+
+ return_ACPI_STATUS(status);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_load_tables)
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_tb_load_namespace
+ *
+ * PARAMETERS: None
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Load the namespace from the DSDT and all SSDTs/PSDTs found in
+ * the RSDT/XSDT.
+ *
+ ******************************************************************************/
+static acpi_status acpi_tb_load_namespace(void)
+{
+ acpi_status status;
+ u32 i;
+ struct acpi_table_header *new_dsdt;
+
+ ACPI_FUNCTION_TRACE(tb_load_namespace);
+
+ (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
+
+ /*
+ * Load the namespace. The DSDT is required, but any SSDT and
+ * PSDT tables are optional. Verify the DSDT.
+ */
+ if (!acpi_gbl_root_table_list.current_table_count ||
+ !ACPI_COMPARE_NAME(&
+ (acpi_gbl_root_table_list.
+ tables[ACPI_TABLE_INDEX_DSDT].signature),
+ ACPI_SIG_DSDT)
+ ||
+ ACPI_FAILURE(acpi_tb_verify_table
+ (&acpi_gbl_root_table_list.
+ tables[ACPI_TABLE_INDEX_DSDT]))) {
+ status = AE_NO_ACPI_TABLES;
+ goto unlock_and_exit;
+ }
+
+ /*
+ * Save the DSDT pointer for simple access. This is the mapped memory
+ * address. We must take care here because the address of the .Tables
+ * array can change dynamically as tables are loaded at run-time. Note:
+ * .Pointer field is not validated until after call to acpi_tb_verify_table.
+ */
+ acpi_gbl_DSDT =
+ acpi_gbl_root_table_list.tables[ACPI_TABLE_INDEX_DSDT].pointer;
+
+ /*
+ * Optionally copy the entire DSDT to local memory (instead of simply
+ * mapping it.) There are some BIOSs that corrupt or replace the original
+ * DSDT, creating the need for this option. Default is FALSE, do not copy
+ * the DSDT.
+ */
+ if (acpi_gbl_copy_dsdt_locally) {
+ new_dsdt = acpi_tb_copy_dsdt(ACPI_TABLE_INDEX_DSDT);
+ if (new_dsdt) {
+ acpi_gbl_DSDT = new_dsdt;
+ }
+ }
+
+ /*
+ * Save the original DSDT header for detection of table corruption
+ * and/or replacement of the DSDT from outside the OS.
+ */
+ ACPI_MEMCPY(&acpi_gbl_original_dsdt_header, acpi_gbl_DSDT,
+ sizeof(struct acpi_table_header));
+
+ (void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
+
+ /* Load and parse tables */
+
+ status = acpi_ns_load_table(ACPI_TABLE_INDEX_DSDT, acpi_gbl_root_node);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /* Load any SSDT or PSDT tables. Note: Loop leaves tables locked */
+
+ (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
+ for (i = 0; i < acpi_gbl_root_table_list.current_table_count; ++i) {
+ if ((!ACPI_COMPARE_NAME
+ (&(acpi_gbl_root_table_list.tables[i].signature),
+ ACPI_SIG_SSDT)
+ &&
+ !ACPI_COMPARE_NAME(&
+ (acpi_gbl_root_table_list.tables[i].
+ signature), ACPI_SIG_PSDT))
+ ||
+ ACPI_FAILURE(acpi_tb_verify_table
+ (&acpi_gbl_root_table_list.tables[i]))) {
+ continue;
+ }
+
+ if (no_auto_ssdt) {
+ printk(KERN_WARNING "ACPI: SSDT ignored due to \"acpi_no_auto_ssdt\"\n");
+ continue;
+ }
+
+ /* Ignore errors while loading tables, get as many as possible */
+
+ (void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
+ (void)acpi_ns_load_table(i, acpi_gbl_root_node);
+ (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
+ }
+
+ ACPI_DEBUG_PRINT((ACPI_DB_INIT, "ACPI Tables successfully acquired\n"));
+
+ unlock_and_exit:
+ (void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
+ return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_load_table
+ *
+ * PARAMETERS: table - Pointer to a buffer containing the ACPI
+ * table to be loaded.
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Dynamically load an ACPI table from the caller's buffer. Must
+ * be a valid ACPI table with a valid ACPI table header.
+ * Note1: Mainly intended to support hotplug addition of SSDTs.
+ * Note2: Does not copy the incoming table. User is reponsible
+ * to ensure that the table is not deleted or unmapped.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_load_table(struct acpi_table_header *table)
+{
+ acpi_status status;
+ struct acpi_table_desc table_desc;
+ u32 table_index;
+
+ ACPI_FUNCTION_TRACE(acpi_load_table);
+
+ /* Parameter validation */
+
+ if (!table) {
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
+ }
+
+ /* Init local table descriptor */
+
+ ACPI_MEMSET(&table_desc, 0, sizeof(struct acpi_table_desc));
+ table_desc.address = ACPI_PTR_TO_PHYSADDR(table);
+ table_desc.pointer = table;
+ table_desc.length = table->length;
+ table_desc.flags = ACPI_TABLE_ORIGIN_UNKNOWN;
+
+ /* Must acquire the interpreter lock during this operation */
+
+ status = acpi_ut_acquire_mutex(ACPI_MTX_INTERPRETER);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /* Install the table and load it into the namespace */
+
+ ACPI_INFO((AE_INFO, "Host-directed Dynamic ACPI Table Load:"));
+ status = acpi_tb_add_table(&table_desc, &table_index);
+ if (ACPI_FAILURE(status)) {
+ goto unlock_and_exit;
+ }
+
+ status = acpi_ns_load_table(table_index, acpi_gbl_root_node);
+
+ /* Invoke table handler if present */
+
+ if (acpi_gbl_table_handler) {
+ (void)acpi_gbl_table_handler(ACPI_TABLE_EVENT_LOAD, table,
+ acpi_gbl_table_handler_context);
+ }
+
+ unlock_and_exit:
+ (void)acpi_ut_release_mutex(ACPI_MTX_INTERPRETER);
+ return_ACPI_STATUS(status);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_load_table)
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_unload_parent_table
+ *
+ * PARAMETERS: object - Handle to any namespace object owned by
+ * the table to be unloaded
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Via any namespace object within an SSDT or OEMx table, unloads
+ * the table and deletes all namespace objects associated with
+ * that table. Unloading of the DSDT is not allowed.
+ * Note: Mainly intended to support hotplug removal of SSDTs.
+ *
+ ******************************************************************************/
+acpi_status acpi_unload_parent_table(acpi_handle object)
+{
+ struct acpi_namespace_node *node =
+ ACPI_CAST_PTR(struct acpi_namespace_node, object);
+ acpi_status status = AE_NOT_EXIST;
+ acpi_owner_id owner_id;
+ u32 i;
+
+ ACPI_FUNCTION_TRACE(acpi_unload_parent_table);
+
+ /* Parameter validation */
+
+ if (!object) {
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
+ }
+
+ /*
+ * The node owner_id is currently the same as the parent table ID.
+ * However, this could change in the future.
+ */
+ owner_id = node->owner_id;
+ if (!owner_id) {
+
+ /* owner_id==0 means DSDT is the owner. DSDT cannot be unloaded */
+
+ return_ACPI_STATUS(AE_TYPE);
+ }
+
+ /* Must acquire the interpreter lock during this operation */
+
+ status = acpi_ut_acquire_mutex(ACPI_MTX_INTERPRETER);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /* Find the table in the global table list */
+
+ for (i = 0; i < acpi_gbl_root_table_list.current_table_count; i++) {
+ if (owner_id != acpi_gbl_root_table_list.tables[i].owner_id) {
+ continue;
+ }
+
+ /*
+ * Allow unload of SSDT and OEMx tables only. Do not allow unload
+ * of the DSDT. No other types of tables should get here, since
+ * only these types can contain AML and thus are the only types
+ * that can create namespace objects.
+ */
+ if (ACPI_COMPARE_NAME
+ (acpi_gbl_root_table_list.tables[i].signature.ascii,
+ ACPI_SIG_DSDT)) {
+ status = AE_TYPE;
+ break;
+ }
+
+ /* Ensure the table is actually loaded */
+
+ if (!acpi_tb_is_table_loaded(i)) {
+ status = AE_NOT_EXIST;
+ break;
+ }
+
+ /* Invoke table handler if present */
+
+ if (acpi_gbl_table_handler) {
+ (void)acpi_gbl_table_handler(ACPI_TABLE_EVENT_UNLOAD,
+ acpi_gbl_root_table_list.
+ tables[i].pointer,
+ acpi_gbl_table_handler_context);
+ }
+
+ /*
+ * Delete all namespace objects owned by this table. Note that
+ * these objects can appear anywhere in the namespace by virtue
+ * of the AML "Scope" operator. Thus, we need to track ownership
+ * by an ID, not simply a position within the hierarchy.
+ */
+ status = acpi_tb_delete_namespace_by_owner(i);
+ if (ACPI_FAILURE(status)) {
+ break;
+ }
+
+ status = acpi_tb_release_owner_id(i);
+ acpi_tb_set_table_loaded_flag(i, FALSE);
+ break;
+ }
+
+ (void)acpi_ut_release_mutex(ACPI_MTX_INTERPRETER);
+ return_ACPI_STATUS(status);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_unload_parent_table)
+
+static int __init acpi_no_auto_ssdt_setup(char *s) {
+
+ printk(KERN_NOTICE "ACPI: SSDT auto-load disabled\n");
+
+ no_auto_ssdt = 1;
+
+ return 1;
+}
+
+__setup("acpi_no_auto_ssdt", acpi_no_auto_ssdt_setup);
*
* FUNCTION: acpi_tb_validate_rsdp
*
- * PARAMETERS: Rsdp - Pointer to unvalidated RSDP
+ * PARAMETERS: rsdp - Pointer to unvalidated RSDP
*
* RETURN: Status
*
*
* RETURN: Status, RSDP physical address
*
- * DESCRIPTION: Search lower 1_mbyte of memory for the root system descriptor
+ * DESCRIPTION: Search lower 1Mbyte of memory for the root system descriptor
* pointer structure. If it is found, set *RSDP to point to it.
*
- * NOTE1: The RSDP must be either in the first 1_k of the Extended
+ * NOTE1: The RSDP must be either in the first 1K of the Extended
* BIOS Data Area or between E0000 and FFFFF (From ACPI Spec.)
* Only a 32-bit physical address is necessary.
*
if (physical_address > 0x400) {
/*
* 1b) Search EBDA paragraphs (EBDA is required to be a
- * minimum of 1_k length)
+ * minimum of 1K length)
*/
table_ptr = acpi_os_map_memory((acpi_physical_address)
physical_address,
/* A valid RSDP was not found */
- ACPI_ERROR((AE_INFO, "A valid RSDP was not found"));
+ ACPI_BIOS_ERROR((AE_INFO, "A valid RSDP was not found"));
return_ACPI_STATUS(AE_NOT_FOUND);
}
* FUNCTION: acpi_tb_scan_memory_for_rsdp
*
* PARAMETERS: start_address - Starting pointer for search
- * Length - Maximum length to search
+ * length - Maximum length to search
*
* RETURN: Pointer to the RSDP if found, otherwise NULL.
*
* FUNCTION: acpi_ut_add_address_range
*
* PARAMETERS: space_id - Address space ID
- * Address - op_region start address
- * Length - op_region length
+ * address - op_region start address
+ * length - op_region length
* region_node - op_region namespace node
*
* RETURN: Status
* FUNCTION: acpi_ut_check_address_range
*
* PARAMETERS: space_id - Address space ID
- * Address - Start address
- * Length - Length of address range
- * Warn - TRUE if warning on overlap desired
+ * address - Start address
+ * length - Length of address range
+ * warn - TRUE if warning on overlap desired
*
* RETURN: Count of the number of conflicts detected. Zero is always
* returned for Space IDs other than Memory or I/O.
*
* FUNCTION: acpi_ut_validate_buffer
*
- * PARAMETERS: Buffer - Buffer descriptor to be validated
+ * PARAMETERS: buffer - Buffer descriptor to be validated
*
* RETURN: Status
*
*
* FUNCTION: acpi_ut_initialize_buffer
*
- * PARAMETERS: Buffer - Buffer to be validated
+ * PARAMETERS: buffer - Buffer to be validated
* required_length - Length needed
*
* RETURN: Status
*
* FUNCTION: acpi_ut_allocate
*
- * PARAMETERS: Size - Size of the allocation
- * Component - Component type of caller
- * Module - Source file name of caller
- * Line - Line number of caller
+ * PARAMETERS: size - Size of the allocation
+ * component - Component type of caller
+ * module - Source file name of caller
+ * line - Line number of caller
*
* RETURN: Address of the allocated memory on success, NULL on failure.
*
*
* FUNCTION: acpi_ut_allocate_zeroed
*
- * PARAMETERS: Size - Size of the allocation
- * Component - Component type of caller
- * Module - Source file name of caller
- * Line - Line number of caller
+ * PARAMETERS: size - Size of the allocation
+ * component - Component type of caller
+ * module - Source file name of caller
+ * line - Line number of caller
*
* RETURN: Address of the allocated memory on success, NULL on failure.
*
* FUNCTION: acpi_ut_copy_ipackage_to_epackage
*
* PARAMETERS: internal_object - Pointer to the object we are returning
- * Buffer - Where the object is returned
+ * buffer - Where the object is returned
* space_used - Where the object length is returned
*
* RETURN: Status
* function_name - Caller's procedure name
* module_name - Caller's module name
* component_id - Caller's component ID
- * Format - Printf format field
+ * format - Printf format field
* ... - Optional printf arguments
*
* RETURN: None
* function_name - Caller's procedure name
* module_name - Caller's module name
* component_id - Caller's component ID
- * Format - Printf format field
+ * format - Printf format field
* ... - Optional printf arguments
*
* RETURN: None
* function_name - Caller's procedure name
* module_name - Caller's module name
* component_id - Caller's component ID
- * Pointer - Pointer to display
+ * pointer - Pointer to display
*
* RETURN: None
*
* function_name - Caller's procedure name
* module_name - Caller's module name
* component_id - Caller's component ID
- * String - Additional string to display
+ * string - Additional string to display
*
* RETURN: None
*
* function_name - Caller's procedure name
* module_name - Caller's module name
* component_id - Caller's component ID
- * Integer - Integer to display
+ * integer - Integer to display
*
* RETURN: None
*
* function_name - Caller's procedure name
* module_name - Caller's module name
* component_id - Caller's component ID
- * Status - Exit status code
+ * status - Exit status code
*
* RETURN: None
*
* function_name - Caller's procedure name
* module_name - Caller's module name
* component_id - Caller's component ID
- * Value - Value to be printed with exit msg
+ * value - Value to be printed with exit msg
*
* RETURN: None
*
* function_name - Caller's procedure name
* module_name - Caller's module name
* component_id - Caller's component ID
- * Ptr - Pointer to display
+ * ptr - Pointer to display
*
* RETURN: None
*
*
* FUNCTION: acpi_ut_dump_buffer
*
- * PARAMETERS: Buffer - Buffer to dump
- * Count - Amount to dump, in bytes
- * Display - BYTE, WORD, DWORD, or QWORD display
- * component_iD - Caller's component ID
+ * PARAMETERS: buffer - Buffer to dump
+ * count - Amount to dump, in bytes
+ * display - BYTE, WORD, DWORD, or QWORD display
+ * component_ID - Caller's component ID
*
* RETURN: None
*
*
* FUNCTION: acpi_ut_dump_buffer
*
- * PARAMETERS: Buffer - Buffer to dump
- * Count - Amount to dump, in bytes
- * Display - BYTE, WORD, DWORD, or QWORD display
- * component_iD - Caller's component ID
+ * PARAMETERS: buffer - Buffer to dump
+ * count - Amount to dump, in bytes
+ * display - BYTE, WORD, DWORD, or QWORD display
+ * component_ID - Caller's component ID
*
* RETURN: None
*
#define _COMPONENT ACPI_UTILITIES
ACPI_MODULE_NAME("utdecode")
-/*******************************************************************************
- *
- * FUNCTION: acpi_format_exception
- *
- * PARAMETERS: Status - The acpi_status code to be formatted
- *
- * RETURN: A string containing the exception text. A valid pointer is
- * always returned.
- *
- * DESCRIPTION: This function translates an ACPI exception into an ASCII string
- * It is here instead of utxface.c so it is always present.
- *
- ******************************************************************************/
-const char *acpi_format_exception(acpi_status status)
-{
- const char *exception = NULL;
-
- ACPI_FUNCTION_ENTRY();
-
- exception = acpi_ut_validate_exception(status);
- if (!exception) {
-
- /* Exception code was not recognized */
-
- ACPI_ERROR((AE_INFO,
- "Unknown exception code: 0x%8.8X", status));
-
- exception = "UNKNOWN_STATUS_CODE";
- }
-
- return (ACPI_CAST_PTR(const char, exception));
-}
-
-ACPI_EXPORT_SYMBOL(acpi_format_exception)
-
/*
* Properties of the ACPI Object Types, both internal and external.
* The table is indexed by values of acpi_object_type
*
* FUNCTION: acpi_ut_hex_to_ascii_char
*
- * PARAMETERS: Integer - Contains the hex digit
- * Position - bit position of the digit within the
+ * PARAMETERS: integer - Contains the hex digit
+ * position - bit position of the digit within the
* integer (multiple of 4)
*
* RETURN: The converted Ascii character
/* Region type decoding */
const char *acpi_gbl_region_types[ACPI_NUM_PREDEFINED_REGIONS] = {
- "SystemMemory",
- "SystemIO",
- "PCI_Config",
- "EmbeddedControl",
- "SMBus",
- "SystemCMOS",
- "PCIBARTarget",
- "IPMI",
- "GeneralPurposeIo",
- "GenericSerialBus"
+ "SystemMemory", /* 0x00 */
+ "SystemIO", /* 0x01 */
+ "PCI_Config", /* 0x02 */
+ "EmbeddedControl", /* 0x03 */
+ "SMBus", /* 0x04 */
+ "SystemCMOS", /* 0x05 */
+ "PCIBARTarget", /* 0x06 */
+ "IPMI", /* 0x07 */
+ "GeneralPurposeIo", /* 0x08 */
+ "GenericSerialBus", /* 0x09 */
+ "PCC" /* 0x0A */
};
char *acpi_ut_get_region_name(u8 space_id)
*
* FUNCTION: acpi_ut_get_type_name
*
- * PARAMETERS: Type - An ACPI object type
+ * PARAMETERS: type - An ACPI object type
*
* RETURN: Decoded ACPI object type name
*
*
* FUNCTION: acpi_ut_get_node_name
*
- * PARAMETERS: Object - A namespace node
+ * PARAMETERS: object - A namespace node
*
* RETURN: ASCII name of the node
*
*
* FUNCTION: acpi_ut_get_descriptor_name
*
- * PARAMETERS: Object - An ACPI object
+ * PARAMETERS: object - An ACPI object
*
* RETURN: Decoded name of the descriptor type
*
*
* FUNCTION: acpi_ut_get_reference_name
*
- * PARAMETERS: Object - An ACPI reference object
+ * PARAMETERS: object - An ACPI reference object
*
* RETURN: Decoded name of the type of reference
*
*
* FUNCTION: acpi_ut_valid_object_type
*
- * PARAMETERS: Type - Object type to be validated
+ * PARAMETERS: type - Object type to be validated
*
* RETURN: TRUE if valid object type, FALSE otherwise
*
*
* FUNCTION: acpi_ut_delete_internal_obj
*
- * PARAMETERS: Object - Object to be deleted
+ * PARAMETERS: object - Object to be deleted
*
* RETURN: None
*
case ACPI_TYPE_PROCESSOR:
case ACPI_TYPE_THERMAL:
- /* Walk the notify handler list for this object */
+ /* Walk the address handler list for this object */
handler_desc = object->common_notify.handler;
while (handler_desc) {
*
* FUNCTION: acpi_ut_update_ref_count
*
- * PARAMETERS: Object - Object whose ref count is to be updated
- * Action - What to do
+ * PARAMETERS: object - Object whose ref count is to be updated
+ * action - What to do
*
* RETURN: New ref count
*
*
* FUNCTION: acpi_ut_update_object_reference
*
- * PARAMETERS: Object - Increment ref count for this object
+ * PARAMETERS: object - Increment ref count for this object
* and all sub-objects
- * Action - Either REF_INCREMENT or REF_DECREMENT or
+ * action - Either REF_INCREMENT or REF_DECREMENT or
* REF_FORCE_DELETE
*
* RETURN: Status
acpi_status status = AE_OK;
union acpi_generic_state *state_list = NULL;
union acpi_operand_object *next_object = NULL;
+ union acpi_operand_object *prev_object;
union acpi_generic_state *state;
u32 i;
case ACPI_TYPE_POWER:
case ACPI_TYPE_THERMAL:
- /* Update the notify objects for these types (if present) */
-
- acpi_ut_update_ref_count(object->common_notify.
- system_notify, action);
- acpi_ut_update_ref_count(object->common_notify.
- device_notify, action);
+ /*
+ * Update the notify objects for these types (if present)
+ * Two lists, system and device notify handlers.
+ */
+ for (i = 0; i < ACPI_NUM_NOTIFY_TYPES; i++) {
+ prev_object =
+ object->common_notify.notify_list[i];
+ while (prev_object) {
+ next_object =
+ prev_object->notify.next[i];
+ acpi_ut_update_ref_count(prev_object,
+ action);
+ prev_object = next_object;
+ }
+ }
break;
case ACPI_TYPE_PACKAGE:
*
* FUNCTION: acpi_ut_add_reference
*
- * PARAMETERS: Object - Object whose reference count is to be
+ * PARAMETERS: object - Object whose reference count is to be
* incremented
*
* RETURN: None
*
* FUNCTION: acpi_ut_remove_reference
*
- * PARAMETERS: Object - Object whose ref count will be decremented
+ * PARAMETERS: object - Object whose ref count will be decremented
*
* RETURN: None
*
* FUNCTION: acpi_ut_evaluate_object
*
* PARAMETERS: prefix_node - Starting node
- * Path - Path to object from starting node
+ * path - Path to object from starting node
* expected_return_types - Bitmap of allowed return types
* return_desc - Where a return value is stored
*
*
* PARAMETERS: object_name - Object name to be evaluated
* device_node - Node for the device
- * Value - Where the value is returned
+ * value - Where the value is returned
*
* RETURN: Status
*
* FUNCTION: acpi_ut_execute_STA
*
* PARAMETERS: device_node - Node for the device
- * Flags - Where the status flags are returned
+ * flags - Where the status flags are returned
*
* RETURN: Status
*
--- /dev/null
+/*******************************************************************************
+ *
+ * Module Name: utexcep - Exception code support
+ *
+ ******************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2012, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#define ACPI_DEFINE_EXCEPTION_TABLE
+#include <linux/export.h>
+#include <acpi/acpi.h>
+#include "accommon.h"
+
+#define _COMPONENT ACPI_UTILITIES
+ACPI_MODULE_NAME("utexcep")
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_format_exception
+ *
+ * PARAMETERS: status - The acpi_status code to be formatted
+ *
+ * RETURN: A string containing the exception text. A valid pointer is
+ * always returned.
+ *
+ * DESCRIPTION: This function translates an ACPI exception into an ASCII
+ * string. Returns "unknown status" string for invalid codes.
+ *
+ ******************************************************************************/
+const char *acpi_format_exception(acpi_status status)
+{
+ const char *exception = NULL;
+
+ ACPI_FUNCTION_ENTRY();
+
+ exception = acpi_ut_validate_exception(status);
+ if (!exception) {
+
+ /* Exception code was not recognized */
+
+ ACPI_ERROR((AE_INFO,
+ "Unknown exception code: 0x%8.8X", status));
+
+ exception = "UNKNOWN_STATUS_CODE";
+ }
+
+ return (ACPI_CAST_PTR(const char, exception));
+}
+
+ACPI_EXPORT_SYMBOL(acpi_format_exception)
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_validate_exception
+ *
+ * PARAMETERS: status - The acpi_status code to be formatted
+ *
+ * RETURN: A string containing the exception text. NULL if exception is
+ * not valid.
+ *
+ * DESCRIPTION: This function validates and translates an ACPI exception into
+ * an ASCII string.
+ *
+ ******************************************************************************/
+const char *acpi_ut_validate_exception(acpi_status status)
+{
+ u32 sub_status;
+ const char *exception = NULL;
+
+ ACPI_FUNCTION_ENTRY();
+
+ /*
+ * Status is composed of two parts, a "type" and an actual code
+ */
+ sub_status = (status & ~AE_CODE_MASK);
+
+ switch (status & AE_CODE_MASK) {
+ case AE_CODE_ENVIRONMENTAL:
+
+ if (sub_status <= AE_CODE_ENV_MAX) {
+ exception = acpi_gbl_exception_names_env[sub_status];
+ }
+ break;
+
+ case AE_CODE_PROGRAMMER:
+
+ if (sub_status <= AE_CODE_PGM_MAX) {
+ exception = acpi_gbl_exception_names_pgm[sub_status];
+ }
+ break;
+
+ case AE_CODE_ACPI_TABLES:
+
+ if (sub_status <= AE_CODE_TBL_MAX) {
+ exception = acpi_gbl_exception_names_tbl[sub_status];
+ }
+ break;
+
+ case AE_CODE_AML:
+
+ if (sub_status <= AE_CODE_AML_MAX) {
+ exception = acpi_gbl_exception_names_aml[sub_status];
+ }
+ break;
+
+ case AE_CODE_CONTROL:
+
+ if (sub_status <= AE_CODE_CTRL_MAX) {
+ exception = acpi_gbl_exception_names_ctrl[sub_status];
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ return (ACPI_CAST_PTR(const char, exception));
+}
*
* RETURN: Status
*
- * DESCRIPTION: Init library globals. All globals that require specific
- * initialization should be initialized here!
+ * DESCRIPTION: Initialize ACPICA globals. All globals that require specific
+ * initialization should be initialized here. This allows for
+ * a warm restart.
*
******************************************************************************/
acpi_gbl_owner_id_mask[i] = 0;
}
- /* Last owner_iD is never valid */
+ /* Last owner_ID is never valid */
acpi_gbl_owner_id_mask[ACPI_NUM_OWNERID_MASKS - 1] = 0x80000000;
/* Global handlers */
- acpi_gbl_system_notify.handler = NULL;
- acpi_gbl_device_notify.handler = NULL;
+ acpi_gbl_global_notify[0].handler = NULL;
+ acpi_gbl_global_notify[1].handler = NULL;
acpi_gbl_exception_handler = NULL;
acpi_gbl_init_handler = NULL;
acpi_gbl_table_handler = NULL;
/******************************************************************************
*
- * Module Name: utids - support for device IDs - HID, UID, CID
+ * Module Name: utids - support for device Ids - HID, UID, CID
*
*****************************************************************************/
* FUNCTION: acpi_ut_create_rw_lock
* acpi_ut_delete_rw_lock
*
- * PARAMETERS: Lock - Pointer to a valid RW lock
+ * PARAMETERS: lock - Pointer to a valid RW lock
*
* RETURN: Status
*
* FUNCTION: acpi_ut_acquire_read_lock
* acpi_ut_release_read_lock
*
- * PARAMETERS: Lock - Pointer to a valid RW lock
+ * PARAMETERS: lock - Pointer to a valid RW lock
*
* RETURN: Status
*
* FUNCTION: acpi_ut_acquire_write_lock
* acpi_ut_release_write_lock
*
- * PARAMETERS: Lock - Pointer to a valid RW lock
+ * PARAMETERS: lock - Pointer to a valid RW lock
*
* RETURN: Status
*
*
* FUNCTION: acpi_ut_short_divide
*
- * PARAMETERS: Dividend - 64-bit dividend
- * Divisor - 32-bit divisor
+ * PARAMETERS: dividend - 64-bit dividend
+ * divisor - 32-bit divisor
* out_quotient - Pointer to where the quotient is returned
* out_remainder - Pointer to where the remainder is returned
*
#define _COMPONENT ACPI_UTILITIES
ACPI_MODULE_NAME("utmisc")
+#if defined ACPI_ASL_COMPILER || defined ACPI_EXEC_APP
/*******************************************************************************
*
- * FUNCTION: acpi_ut_validate_exception
+ * FUNCTION: ut_convert_backslashes
*
- * PARAMETERS: Status - The acpi_status code to be formatted
+ * PARAMETERS: pathname - File pathname string to be converted
*
- * RETURN: A string containing the exception text. NULL if exception is
- * not valid.
+ * RETURN: Modifies the input Pathname
*
- * DESCRIPTION: This function validates and translates an ACPI exception into
- * an ASCII string.
+ * DESCRIPTION: Convert all backslashes (0x5C) to forward slashes (0x2F) within
+ * the entire input file pathname string.
*
******************************************************************************/
-const char *acpi_ut_validate_exception(acpi_status status)
+void ut_convert_backslashes(char *pathname)
{
- u32 sub_status;
- const char *exception = NULL;
- ACPI_FUNCTION_ENTRY();
-
- /*
- * Status is composed of two parts, a "type" and an actual code
- */
- sub_status = (status & ~AE_CODE_MASK);
-
- switch (status & AE_CODE_MASK) {
- case AE_CODE_ENVIRONMENTAL:
-
- if (sub_status <= AE_CODE_ENV_MAX) {
- exception = acpi_gbl_exception_names_env[sub_status];
- }
- break;
-
- case AE_CODE_PROGRAMMER:
-
- if (sub_status <= AE_CODE_PGM_MAX) {
- exception = acpi_gbl_exception_names_pgm[sub_status];
- }
- break;
-
- case AE_CODE_ACPI_TABLES:
-
- if (sub_status <= AE_CODE_TBL_MAX) {
- exception = acpi_gbl_exception_names_tbl[sub_status];
- }
- break;
-
- case AE_CODE_AML:
-
- if (sub_status <= AE_CODE_AML_MAX) {
- exception = acpi_gbl_exception_names_aml[sub_status];
- }
- break;
-
- case AE_CODE_CONTROL:
+ if (!pathname) {
+ return;
+ }
- if (sub_status <= AE_CODE_CTRL_MAX) {
- exception = acpi_gbl_exception_names_ctrl[sub_status];
+ while (*pathname) {
+ if (*pathname == '\\') {
+ *pathname = '/';
}
- break;
- default:
- break;
+ pathname++;
}
-
- return (ACPI_CAST_PTR(const char, exception));
}
+#endif
/*******************************************************************************
*
* FUNCTION: acpi_ut_is_pci_root_bridge
*
- * PARAMETERS: Id - The HID/CID in string format
+ * PARAMETERS: id - The HID/CID in string format
*
* RETURN: TRUE if the Id is a match for a PCI/PCI-Express Root Bridge
*
*
* FUNCTION: acpi_ut_is_aml_table
*
- * PARAMETERS: Table - An ACPI table
+ * PARAMETERS: table - An ACPI table
*
* RETURN: TRUE if table contains executable AML; FALSE otherwise
*
*
* FUNCTION: acpi_ut_release_owner_id
*
- * PARAMETERS: owner_id_ptr - Pointer to a previously allocated owner_iD
+ * PARAMETERS: owner_id_ptr - Pointer to a previously allocated owner_ID
*
* RETURN: None. No error is returned because we are either exiting a
* control method or unloading a table. Either way, we would
*owner_id_ptr = 0;
- /* Zero is not a valid owner_iD */
+ /* Zero is not a valid owner_ID */
if (owner_id == 0) {
ACPI_ERROR((AE_INFO, "Invalid OwnerId: 0x%2.2X", owner_id));
*
* FUNCTION: acpi_ut_print_string
*
- * PARAMETERS: String - Null terminated ASCII string
+ * PARAMETERS: string - Null terminated ASCII string
* max_length - Maximum output length
*
* RETURN: None
*
* FUNCTION: acpi_ut_dword_byte_swap
*
- * PARAMETERS: Value - Value to be converted
+ * PARAMETERS: value - Value to be converted
*
* RETURN: u32 integer with bytes swapped
*
*
* FUNCTION: acpi_ut_display_init_pathname
*
- * PARAMETERS: Type - Object type of the node
+ * PARAMETERS: type - Object type of the node
* obj_handle - Handle whose pathname will be displayed
- * Path - Additional path string to be appended.
+ * path - Additional path string to be appended.
* (NULL if no extra path)
*
* RETURN: acpi_status
*
* FUNCTION: acpi_ut_valid_acpi_char
*
- * PARAMETERS: Char - The character to be examined
- * Position - Byte position (0-3)
+ * PARAMETERS: char - The character to be examined
+ * position - Byte position (0-3)
*
* RETURN: TRUE if the character is valid, FALSE otherwise
*
*
* FUNCTION: acpi_ut_valid_acpi_name
*
- * PARAMETERS: Name - The name to be examined
+ * PARAMETERS: name - The name to be examined
*
* RETURN: TRUE if the name is valid, FALSE otherwise
*
*
* FUNCTION: acpi_ut_repair_name
*
- * PARAMETERS: Name - The ACPI name to be repaired
+ * PARAMETERS: name - The ACPI name to be repaired
*
* RETURN: Repaired version of the name
*
*
* FUNCTION: acpi_ut_strtoul64
*
- * PARAMETERS: String - Null terminated string
- * Base - Radix of the string: 16 or ACPI_ANY_BASE;
+ * PARAMETERS: string - Null terminated string
+ * base - Radix of the string: 16 or ACPI_ANY_BASE;
* ACPI_ANY_BASE means 'in behalf of to_integer'
* ret_integer - Where the converted integer is returned
*
if (to_integer_op) {
/*
- * Base equal to ACPI_ANY_BASE means 'to_integer operation case'.
+ * Base equal to ACPI_ANY_BASE means 'ToInteger operation case'.
* We need to determine if it is decimal or hexadecimal.
*/
if ((*string == '0') && (ACPI_TOLOWER(*(string + 1)) == 'x')) {
*
* FUNCTION: acpi_ut_create_update_state_and_push
*
- * PARAMETERS: Object - Object to be added to the new state
- * Action - Increment/Decrement
+ * PARAMETERS: object - Object to be added to the new state
+ * action - Increment/Decrement
* state_list - List the state will be added to
*
* RETURN: Status
* PARAMETERS: source_object - The package to walk
* target_object - Target object (if package is being copied)
* walk_callback - Called once for each package element
- * Context - Passed to the callback function
+ * context - Passed to the callback function
*
* RETURN: Status
*
*
* FUNCTION: acpi_ut_create_mutex
*
- * PARAMETERS: mutex_iD - ID of the mutex to be created
+ * PARAMETERS: mutex_ID - ID of the mutex to be created
*
* RETURN: Status
*
*
* FUNCTION: acpi_ut_delete_mutex
*
- * PARAMETERS: mutex_iD - ID of the mutex to be deleted
+ * PARAMETERS: mutex_ID - ID of the mutex to be deleted
*
* RETURN: Status
*
*
* FUNCTION: acpi_ut_acquire_mutex
*
- * PARAMETERS: mutex_iD - ID of the mutex to be acquired
+ * PARAMETERS: mutex_ID - ID of the mutex to be acquired
*
* RETURN: Status
*
*
* FUNCTION: acpi_ut_release_mutex
*
- * PARAMETERS: mutex_iD - ID of the mutex to be released
+ * PARAMETERS: mutex_ID - ID of the mutex to be released
*
* RETURN: Status
*
* PARAMETERS: module_name - Source file name of caller
* line_number - Line number of caller
* component_id - Component type of caller
- * Type - ACPI Type of the new object
+ * type - ACPI Type of the new object
*
* RETURN: A new internal object, null on failure
*
*
* FUNCTION: acpi_ut_create_package_object
*
- * PARAMETERS: Count - Number of package elements
+ * PARAMETERS: count - Number of package elements
*
* RETURN: Pointer to a new Package object, null on failure
*
*
* FUNCTION: acpi_ut_valid_internal_object
*
- * PARAMETERS: Object - Object to be validated
+ * PARAMETERS: object - Object to be validated
*
* RETURN: TRUE if object is valid, FALSE otherwise
*
- * DESCRIPTION: Validate a pointer to be a union acpi_operand_object
+ * DESCRIPTION: Validate a pointer to be of type union acpi_operand_object
*
******************************************************************************/
switch (ACPI_GET_DESCRIPTOR_TYPE(object)) {
case ACPI_DESC_TYPE_OPERAND:
- /* The object appears to be a valid union acpi_operand_object */
+ /* The object appears to be a valid union acpi_operand_object */
return (TRUE);
*
* FUNCTION: acpi_ut_delete_object_desc
*
- * PARAMETERS: Object - An Acpi internal object to be deleted
+ * PARAMETERS: object - An Acpi internal object to be deleted
*
* RETURN: None.
*
{
ACPI_FUNCTION_TRACE_PTR(ut_delete_object_desc, object);
- /* Object must be a union acpi_operand_object */
+ /* Object must be a union acpi_operand_object */
if (ACPI_GET_DESCRIPTOR_TYPE(object) != ACPI_DESC_TYPE_OPERAND) {
ACPI_ERROR((AE_INFO,
{"Windows 2001.1", NULL, 0, ACPI_OSI_WINSRV_2003}, /* Windows Server 2003 */
{"Windows 2001 SP2", NULL, 0, ACPI_OSI_WIN_XP_SP2}, /* Windows XP SP2 */
{"Windows 2001.1 SP1", NULL, 0, ACPI_OSI_WINSRV_2003_SP1}, /* Windows Server 2003 SP1 - Added 03/2006 */
- {"Windows 2006", NULL, 0, ACPI_OSI_WIN_VISTA}, /* Windows Vista - Added 03/2006 */
+ {"Windows 2006", NULL, 0, ACPI_OSI_WIN_VISTA}, /* Windows vista - Added 03/2006 */
{"Windows 2006.1", NULL, 0, ACPI_OSI_WINSRV_2008}, /* Windows Server 2008 - Added 09/2009 */
{"Windows 2006 SP1", NULL, 0, ACPI_OSI_WIN_VISTA_SP1}, /* Windows Vista SP1 - Added 09/2009 */
{"Windows 2006 SP2", NULL, 0, ACPI_OSI_WIN_VISTA_SP2}, /* Windows Vista SP2 - Added 09/2010 */
ACPI_SMALL_VARIABLE_LENGTH, /* 06 start_dependent_functions */
ACPI_FIXED_LENGTH, /* 07 end_dependent_functions */
ACPI_FIXED_LENGTH, /* 08 IO */
- ACPI_FIXED_LENGTH, /* 09 fixed_iO */
- ACPI_FIXED_LENGTH, /* 0_a fixed_dMA */
+ ACPI_FIXED_LENGTH, /* 09 fixed_IO */
+ ACPI_FIXED_LENGTH, /* 0A fixed_DMA */
0,
0,
0,
- ACPI_VARIABLE_LENGTH, /* 0_e vendor_short */
- ACPI_FIXED_LENGTH, /* 0_f end_tag */
+ ACPI_VARIABLE_LENGTH, /* 0E vendor_short */
+ ACPI_FIXED_LENGTH, /* 0F end_tag */
/* Large descriptors */
ACPI_FIXED_LENGTH, /* 06 memory32_fixed */
ACPI_VARIABLE_LENGTH, /* 07 Dword* address */
ACPI_VARIABLE_LENGTH, /* 08 Word* address */
- ACPI_VARIABLE_LENGTH, /* 09 extended_iRQ */
- ACPI_VARIABLE_LENGTH, /* 0_a Qword* address */
- ACPI_FIXED_LENGTH, /* 0_b Extended* address */
- ACPI_VARIABLE_LENGTH, /* 0_c Gpio* */
+ ACPI_VARIABLE_LENGTH, /* 09 extended_IRQ */
+ ACPI_VARIABLE_LENGTH, /* 0A Qword* address */
+ ACPI_FIXED_LENGTH, /* 0B Extended* address */
+ ACPI_VARIABLE_LENGTH, /* 0C Gpio* */
0,
- ACPI_VARIABLE_LENGTH /* 0_e *serial_bus */
+ ACPI_VARIABLE_LENGTH /* 0E *serial_bus */
};
/*
- * For the i_aSL compiler/disassembler, we don't want any error messages
+ * For the iASL compiler/disassembler, we don't want any error messages
* because the disassembler uses the resource validation code to determine
* if Buffer objects are actually Resource Templates.
*/
*
* FUNCTION: acpi_ut_walk_aml_resources
*
- * PARAMETERS: Aml - Pointer to the raw AML resource template
+ * PARAMETERS: aml - Pointer to the raw AML resource template
* aml_length - Length of the entire template
* user_function - Called once for each descriptor found. If
* NULL, a pointer to the end_tag is returned
- * Context - Passed to user_function
+ * context - Passed to user_function
*
* RETURN: Status
*
*
* FUNCTION: acpi_ut_validate_resource
*
- * PARAMETERS: Aml - Pointer to the raw AML resource descriptor
+ * PARAMETERS: aml - Pointer to the raw AML resource descriptor
* return_index - Where the resource index is returned. NULL
* if the index is not required.
*
*
* FUNCTION: acpi_ut_get_resource_type
*
- * PARAMETERS: Aml - Pointer to the raw AML resource descriptor
+ * PARAMETERS: aml - Pointer to the raw AML resource descriptor
*
* RETURN: The Resource Type with no extraneous bits (except the
* Large/Small descriptor bit -- this is left alone)
*
* FUNCTION: acpi_ut_get_resource_length
*
- * PARAMETERS: Aml - Pointer to the raw AML resource descriptor
+ * PARAMETERS: aml - Pointer to the raw AML resource descriptor
*
* RETURN: Byte Length
*
*
* FUNCTION: acpi_ut_get_resource_header_length
*
- * PARAMETERS: Aml - Pointer to the raw AML resource descriptor
+ * PARAMETERS: aml - Pointer to the raw AML resource descriptor
*
* RETURN: Length of the AML header (depends on large/small descriptor)
*
*
* FUNCTION: acpi_ut_get_descriptor_length
*
- * PARAMETERS: Aml - Pointer to the raw AML resource descriptor
+ * PARAMETERS: aml - Pointer to the raw AML resource descriptor
*
* RETURN: Byte length
*
*
* FUNCTION: acpi_ut_create_pkg_state_and_push
*
- * PARAMETERS: Object - Object to be added to the new state
- * Action - Increment/Decrement
+ * PARAMETERS: object - Object to be added to the new state
+ * action - Increment/Decrement
* state_list - List the state will be added to
*
* RETURN: Status
* FUNCTION: acpi_ut_push_generic_state
*
* PARAMETERS: list_head - Head of the state stack
- * State - State object to push
+ * state - State object to push
*
* RETURN: None
*
*
* FUNCTION: acpi_ut_create_update_state
*
- * PARAMETERS: Object - Initial Object to be installed in the state
- * Action - Update action to be performed
+ * PARAMETERS: object - Initial Object to be installed in the state
+ * action - Update action to be performed
*
* RETURN: New state object, null on failure
*
*
* FUNCTION: acpi_ut_create_pkg_state
*
- * PARAMETERS: Object - Initial Object to be installed in the state
- * Action - Update action to be performed
+ * PARAMETERS: object - Initial Object to be installed in the state
+ * action - Update action to be performed
*
* RETURN: New state object, null on failure
*
*
* FUNCTION: acpi_ut_delete_generic_state
*
- * PARAMETERS: State - The state object to be deleted
+ * PARAMETERS: state - The state object to be deleted
*
* RETURN: None
*
*
* FUNCTION: acpi_enable_subsystem
*
- * PARAMETERS: Flags - Init/enable Options
+ * PARAMETERS: flags - Init/enable Options
*
* RETURN: Status
*
*
* FUNCTION: acpi_initialize_objects
*
- * PARAMETERS: Flags - Init/enable Options
+ * PARAMETERS: flags - Init/enable Options
*
* RETURN: Status
*
* PARAMETERS: out_buffer - A buffer to receive the resources for the
* device
*
- * RETURN: Status - the status of the call
+ * RETURN: status - the status of the call
*
* DESCRIPTION: This function is called to get information about the current
* state of the ACPI subsystem. It will return system information
*
* FUNCTION: acpi_install_initialization_handler
*
- * PARAMETERS: Handler - Callback procedure
- * Function - Not (currently) used, see below
+ * PARAMETERS: handler - Callback procedure
+ * function - Not (currently) used, see below
*
* RETURN: Status
*
*
* FUNCTION: acpi_install_interface_handler
*
- * PARAMETERS: Handler - The _OSI interface handler to install
+ * PARAMETERS: handler - The _OSI interface handler to install
* NULL means "remove existing handler"
*
* RETURN: Status
* FUNCTION: acpi_check_address_range
*
* PARAMETERS: space_id - Address space ID
- * Address - Start address
- * Length - Length
- * Warn - TRUE if warning on overlap desired
+ * address - Start address
+ * length - Length
+ * warn - TRUE if warning on overlap desired
*
* RETURN: Count of the number of conflicts detected.
*
* This module is used for the in-kernel ACPICA as well as the ACPICA
* tools/applications.
*
- * For the i_aSL compiler case, the output is redirected to stderr so that
+ * For the iASL compiler case, the output is redirected to stderr so that
* any of the various ACPI errors and warnings do not appear in the output
* files, for either the compiler or disassembler portions of the tool.
*/
#else
/*
- * non-i_aSL case - no redirection, nothing to do
+ * non-iASL case - no redirection, nothing to do
*/
#define ACPI_MSG_REDIRECT_BEGIN
#define ACPI_MSG_REDIRECT_END
#define ACPI_MSG_EXCEPTION "ACPI Exception: "
#define ACPI_MSG_WARNING "ACPI Warning: "
#define ACPI_MSG_INFO "ACPI: "
+#define ACPI_MSG_BIOS_ERROR "ACPI BIOS Bug: Error: "
+#define ACPI_MSG_BIOS_WARNING "ACPI BIOS Bug: Warning: "
/*
* Common message suffix
*/
*
* PARAMETERS: module_name - Caller's module name (for error output)
* line_number - Caller's line number (for error output)
- * Format - Printf format string + additional args
+ * format - Printf format string + additional args
*
* RETURN: None
*
*
* PARAMETERS: module_name - Caller's module name (for error output)
* line_number - Caller's line number (for error output)
- * Status - Status to be formatted
- * Format - Printf format string + additional args
+ * status - Status to be formatted
+ * format - Printf format string + additional args
*
* RETURN: None
*
*
* PARAMETERS: module_name - Caller's module name (for error output)
* line_number - Caller's line number (for error output)
- * Format - Printf format string + additional args
+ * format - Printf format string + additional args
*
* RETURN: None
*
*
* PARAMETERS: module_name - Caller's module name (for error output)
* line_number - Caller's line number (for error output)
- * Format - Printf format string + additional args
+ * format - Printf format string + additional args
*
* RETURN: None
*
ACPI_EXPORT_SYMBOL(acpi_info)
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_bios_error
+ *
+ * PARAMETERS: module_name - Caller's module name (for error output)
+ * line_number - Caller's line number (for error output)
+ * format - Printf format string + additional args
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Print "ACPI Firmware Error" message with module/line/version
+ * info
+ *
+ ******************************************************************************/
+void ACPI_INTERNAL_VAR_XFACE
+acpi_bios_error(const char *module_name,
+ u32 line_number, const char *format, ...)
+{
+ va_list arg_list;
+
+ ACPI_MSG_REDIRECT_BEGIN;
+ acpi_os_printf(ACPI_MSG_BIOS_ERROR);
+
+ va_start(arg_list, format);
+ acpi_os_vprintf(format, arg_list);
+ ACPI_MSG_SUFFIX;
+ va_end(arg_list);
+
+ ACPI_MSG_REDIRECT_END;
+}
+
+ACPI_EXPORT_SYMBOL(acpi_bios_error)
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_bios_warning
+ *
+ * PARAMETERS: module_name - Caller's module name (for error output)
+ * line_number - Caller's line number (for error output)
+ * format - Printf format string + additional args
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Print "ACPI Firmware Warning" message with module/line/version
+ * info
+ *
+ ******************************************************************************/
+void ACPI_INTERNAL_VAR_XFACE
+acpi_bios_warning(const char *module_name,
+ u32 line_number, const char *format, ...)
+{
+ va_list arg_list;
+
+ ACPI_MSG_REDIRECT_BEGIN;
+ acpi_os_printf(ACPI_MSG_BIOS_WARNING);
+
+ va_start(arg_list, format);
+ acpi_os_vprintf(format, arg_list);
+ ACPI_MSG_SUFFIX;
+ va_end(arg_list);
+
+ ACPI_MSG_REDIRECT_END;
+}
+
+ACPI_EXPORT_SYMBOL(acpi_bios_warning)
+
/*
* The remainder of this module contains internal error functions that may
* be configured out.
*
* PARAMETERS: module_name - Caller's module name (for error output)
* line_number - Caller's line number (for error output)
- * Pathname - Full pathname to the node
+ * pathname - Full pathname to the node
* node_flags - From Namespace node for the method/object
- * Format - Printf format string + additional args
+ * format - Printf format string + additional args
*
* RETURN: None
*
*
* PARAMETERS: module_name - Caller's module name (for error output)
* line_number - Caller's line number (for error output)
- * Message - Error message to use on failure
+ * message - Error message to use on failure
* prefix_node - Prefix relative to the path
- * Path - Path to the node (optional)
+ * path - Path to the node (optional)
* method_status - Execution status
*
* RETURN: None
*
* FUNCTION: acpi_ut_get_mutex_object
*
- * PARAMETERS: Handle - Mutex or prefix handle (optional)
- * Pathname - Mutex pathname (optional)
+ * PARAMETERS: handle - Mutex or prefix handle (optional)
+ * pathname - Mutex pathname (optional)
* ret_obj - Where the mutex object is returned
*
* RETURN: Status
*
* FUNCTION: acpi_acquire_mutex
*
- * PARAMETERS: Handle - Mutex or prefix handle (optional)
- * Pathname - Mutex pathname (optional)
- * Timeout - Max time to wait for the lock (millisec)
+ * PARAMETERS: handle - Mutex or prefix handle (optional)
+ * pathname - Mutex pathname (optional)
+ * timeout - Max time to wait for the lock (millisec)
*
* RETURN: Status
*
*
* FUNCTION: acpi_release_mutex
*
- * PARAMETERS: Handle - Mutex or prefix handle (optional)
- * Pathname - Mutex pathname (optional)
+ * PARAMETERS: handle - Mutex or prefix handle (optional)
+ * pathname - Mutex pathname (optional)
*
* RETURN: Status
*
u8 ins = entry->instruction;
if (ctx->ins_table[ins].flags & APEI_EXEC_INS_ACCESS_REGISTER)
- return acpi_os_map_generic_address(&entry->register_region);
+ return apei_map_generic_address(&entry->register_region);
return 0;
}
u8 ins = entry->instruction;
if (ctx->ins_table[ins].flags & APEI_EXEC_INS_ACCESS_REGISTER)
- acpi_os_unmap_generic_address(&entry->register_region);
+ apei_unmap_generic_address(&entry->register_region);
return 0;
}
}
*access_bit_width = 1UL << (access_size_code + 2);
+ /* Fixup common BIOS bug */
+ if (bit_width == 32 && bit_offset == 0 && (*paddr & 0x03) == 0 &&
+ *access_bit_width < 32)
+ *access_bit_width = 32;
+
if ((bit_width + bit_offset) > *access_bit_width) {
pr_warning(FW_BUG APEI_PFX
"Invalid bit width + offset in GAR [0x%llx/%u/%u/%u/%u]\n",
return 0;
}
+int apei_map_generic_address(struct acpi_generic_address *reg)
+{
+ int rc;
+ u32 access_bit_width;
+ u64 address;
+
+ rc = apei_check_gar(reg, &address, &access_bit_width);
+ if (rc)
+ return rc;
+ return acpi_os_map_generic_address(reg);
+}
+EXPORT_SYMBOL_GPL(apei_map_generic_address);
+
/* read GAR in interrupt (including NMI) or process context */
int apei_read(u64 *val, struct acpi_generic_address *reg)
{
#define APEI_INTERNAL_H
#include <linux/cper.h>
+#include <linux/acpi.h>
+#include <linux/acpi_io.h>
struct apei_exec_context;
/* IP has been set in instruction function */
#define APEI_EXEC_SET_IP 1
+int apei_map_generic_address(struct acpi_generic_address *reg);
+
+static inline void apei_unmap_generic_address(struct acpi_generic_address *reg)
+{
+ acpi_os_unmap_generic_address(reg);
+}
+
int apei_read(u64 *val, struct acpi_generic_address *reg);
int apei_write(u64 val, struct acpi_generic_address *reg);
if (!ghes)
return ERR_PTR(-ENOMEM);
ghes->generic = generic;
- rc = acpi_os_map_generic_address(&generic->error_status_address);
+ rc = apei_map_generic_address(&generic->error_status_address);
if (rc)
goto err_free;
error_block_length = generic->error_block_length;
return ghes;
err_unmap:
- acpi_os_unmap_generic_address(&generic->error_status_address);
+ apei_unmap_generic_address(&generic->error_status_address);
err_free:
kfree(ghes);
return ERR_PTR(rc);
static void ghes_fini(struct ghes *ghes)
{
kfree(ghes->estatus);
- acpi_os_unmap_generic_address(&ghes->generic->error_status_address);
+ apei_unmap_generic_address(&ghes->generic->error_status_address);
}
enum {
else
val->intval = battery->capacity_now * 1000;
break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ if (battery->capacity_now && battery->full_charge_capacity)
+ val->intval = battery->capacity_now * 100/
+ battery->full_charge_capacity;
+ else
+ val->intval = 0;
+ break;
case POWER_SUPPLY_PROP_MODEL_NAME:
val->strval = battery->model_number;
break;
POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
POWER_SUPPLY_PROP_CHARGE_FULL,
POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
POWER_SUPPLY_PROP_MODEL_NAME,
POWER_SUPPLY_PROP_MANUFACTURER,
POWER_SUPPLY_PROP_SERIAL_NUMBER,
POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
POWER_SUPPLY_PROP_ENERGY_FULL,
POWER_SUPPLY_PROP_ENERGY_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
POWER_SUPPLY_PROP_MODEL_NAME,
POWER_SUPPLY_PROP_MANUFACTURER,
POWER_SUPPLY_PROP_SERIAL_NUMBER,
static void acpi_battery_refresh(struct acpi_battery *battery)
{
+ int power_unit;
+
if (!battery->bat.dev)
return;
+ power_unit = battery->power_unit;
+
acpi_battery_get_info(battery);
- /* The battery may have changed its reporting units. */
+
+ if (power_unit == battery->power_unit)
+ return;
+
+ /* The battery has changed its reporting units. */
sysfs_remove_battery(battery);
sysfs_add_battery(battery);
}
Power Management
-------------------------------------------------------------------------- */
+static const char *state_string(int state)
+{
+ switch (state) {
+ case ACPI_STATE_D0:
+ return "D0";
+ case ACPI_STATE_D1:
+ return "D1";
+ case ACPI_STATE_D2:
+ return "D2";
+ case ACPI_STATE_D3_HOT:
+ return "D3hot";
+ case ACPI_STATE_D3_COLD:
+ return "D3";
+ default:
+ return "(unknown)";
+ }
+}
+
static int __acpi_bus_get_power(struct acpi_device *device, int *state)
{
- int result = 0;
- acpi_status status = 0;
- unsigned long long psc = 0;
+ int result = ACPI_STATE_UNKNOWN;
if (!device || !state)
return -EINVAL;
- *state = ACPI_STATE_UNKNOWN;
-
- if (device->flags.power_manageable) {
- /*
- * Get the device's power state either directly (via _PSC) or
- * indirectly (via power resources).
- */
- if (device->power.flags.power_resources) {
- result = acpi_power_get_inferred_state(device, state);
- if (result)
- return result;
- } else if (device->power.flags.explicit_get) {
- status = acpi_evaluate_integer(device->handle, "_PSC",
- NULL, &psc);
- if (ACPI_FAILURE(status))
- return -ENODEV;
- *state = (int)psc;
- }
- } else {
+ if (!device->flags.power_manageable) {
/* TBD: Non-recursive algorithm for walking up hierarchy. */
*state = device->parent ?
device->parent->power.state : ACPI_STATE_D0;
+ goto out;
+ }
+
+ /*
+ * Get the device's power state either directly (via _PSC) or
+ * indirectly (via power resources).
+ */
+ if (device->power.flags.explicit_get) {
+ unsigned long long psc;
+ acpi_status status = acpi_evaluate_integer(device->handle,
+ "_PSC", NULL, &psc);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ result = psc;
+ }
+ /* The test below covers ACPI_STATE_UNKNOWN too. */
+ if (result <= ACPI_STATE_D2) {
+ ; /* Do nothing. */
+ } else if (device->power.flags.power_resources) {
+ int error = acpi_power_get_inferred_state(device, &result);
+ if (error)
+ return error;
+ } else if (result == ACPI_STATE_D3_HOT) {
+ result = ACPI_STATE_D3;
}
+ *state = result;
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] power state is D%d\n",
- device->pnp.bus_id, *state));
+ out:
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] power state is %s\n",
+ device->pnp.bus_id, state_string(*state)));
return 0;
}
/* Make sure this is a valid target state */
if (state == device->power.state) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device is already at D%d\n",
- state));
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device is already at %s\n",
+ state_string(state)));
return 0;
}
if (!device->power.states[state].flags.valid) {
- printk(KERN_WARNING PREFIX "Device does not support D%d\n", state);
+ printk(KERN_WARNING PREFIX "Device does not support %s\n",
+ state_string(state));
return -ENODEV;
}
if (device->parent && (state < device->parent->power.state)) {
end:
if (result)
printk(KERN_WARNING PREFIX
- "Device [%s] failed to transition to D%d\n",
- device->pnp.bus_id, state);
+ "Device [%s] failed to transition to %s\n",
+ device->pnp.bus_id, state_string(state));
else {
device->power.state = state;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Device [%s] transitioned to D%d\n",
- device->pnp.bus_id, state));
+ "Device [%s] transitioned to %s\n",
+ device->pnp.bus_id, state_string(state)));
}
return result;
struct acpi_os_dpc *dpc = container_of(work, struct acpi_os_dpc, work);
if (dpc->wait)
- acpi_os_wait_events_complete(NULL);
+ acpi_os_wait_events_complete();
dpc->function(dpc->context);
kfree(dpc);
return __acpi_os_execute(0, function, context, 1);
}
-void acpi_os_wait_events_complete(void *context)
+void acpi_os_wait_events_complete(void)
{
flush_workqueue(kacpid_wq);
flush_workqueue(kacpi_notify_wq);
* We know a device's inferred power state when all the resources
* required for a given D-state are 'on'.
*/
- for (i = ACPI_STATE_D0; i < ACPI_STATE_D3_HOT; i++) {
+ for (i = ACPI_STATE_D0; i <= ACPI_STATE_D3_HOT; i++) {
list = &device->power.states[i].resources;
if (list->count < 1)
continue;
* Processor (CPU3, 0x03, 0x00000410, 0x06) {}
* }
*
- * Ignores apic_id and always return 0 for CPU0's handle.
+ * Ignores apic_id and always returns 0 for the processor
+ * handle with acpi id 0 if nr_cpu_ids is 1.
+ * This should be the case if SMP tables are not found.
* Return -1 for other CPU's handle.
*/
- if (acpi_id == 0)
+ if (nr_cpu_ids <= 1 && acpi_id == 0)
return acpi_id;
else
return apic_id;
/*
* Suspend / resume control
*/
+static int acpi_idle_suspend;
static u32 saved_bm_rld;
static void acpi_idle_bm_rld_save(void)
int acpi_processor_suspend(struct acpi_device * device, pm_message_t state)
{
+ if (acpi_idle_suspend == 1)
+ return 0;
+
acpi_idle_bm_rld_save();
+ acpi_idle_suspend = 1;
return 0;
}
int acpi_processor_resume(struct acpi_device * device)
{
+ if (acpi_idle_suspend == 0)
+ return 0;
+
acpi_idle_bm_rld_restore();
+ acpi_idle_suspend = 0;
return 0;
}
pr->power.states[ACPI_STATE_C3].address = pr->pblk + 5;
/* determine latencies from FADT */
- pr->power.states[ACPI_STATE_C2].latency = acpi_gbl_FADT.C2latency;
- pr->power.states[ACPI_STATE_C3].latency = acpi_gbl_FADT.C3latency;
+ pr->power.states[ACPI_STATE_C2].latency = acpi_gbl_FADT.c2_latency;
+ pr->power.states[ACPI_STATE_C3].latency = acpi_gbl_FADT.c3_latency;
/*
* FADT specified C2 latency must be less than or equal to
* 100 microseconds.
*/
- if (acpi_gbl_FADT.C2latency > ACPI_PROCESSOR_MAX_C2_LATENCY) {
+ if (acpi_gbl_FADT.c2_latency > ACPI_PROCESSOR_MAX_C2_LATENCY) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "C2 latency too large [%d]\n", acpi_gbl_FADT.C2latency));
+ "C2 latency too large [%d]\n", acpi_gbl_FADT.c2_latency));
/* invalidate C2 */
pr->power.states[ACPI_STATE_C2].address = 0;
}
* FADT supplied C3 latency must be less than or equal to
* 1000 microseconds.
*/
- if (acpi_gbl_FADT.C3latency > ACPI_PROCESSOR_MAX_C3_LATENCY) {
+ if (acpi_gbl_FADT.c3_latency > ACPI_PROCESSOR_MAX_C3_LATENCY) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "C3 latency too large [%d]\n", acpi_gbl_FADT.C3latency));
+ "C3 latency too large [%d]\n", acpi_gbl_FADT.c3_latency));
/* invalidate C3 */
pr->power.states[ACPI_STATE_C3].address = 0;
}
local_irq_disable();
+ if (acpi_idle_suspend) {
+ local_irq_enable();
+ cpu_relax();
+ return -EBUSY;
+ }
+
lapic_timer_state_broadcast(pr, cx, 1);
kt1 = ktime_get_real();
acpi_idle_do_entry(cx);
local_irq_disable();
+ if (acpi_idle_suspend) {
+ local_irq_enable();
+ cpu_relax();
+ return -EBUSY;
+ }
+
if (cx->entry_method != ACPI_CSTATE_FFH) {
current_thread_info()->status &= ~TS_POLLING;
/*
drv, drv->safe_state_index);
} else {
local_irq_disable();
- acpi_safe_halt();
+ if (!acpi_idle_suspend)
+ acpi_safe_halt();
local_irq_enable();
- return -EINVAL;
+ return -EBUSY;
}
}
local_irq_disable();
+ if (acpi_idle_suspend) {
+ local_irq_enable();
+ cpu_relax();
+ return -EBUSY;
+ }
+
if (cx->entry_method != ACPI_CSTATE_FFH) {
current_thread_info()->status &= ~TS_POLLING;
/*
struct acpi_buffer state = { 0, NULL };
union acpi_object *pss = NULL;
int i;
+ int last_invalid = -1;
status = acpi_evaluate_object(pr->handle, "_PSS", NULL, &buffer);
((u32)(px->core_frequency * 1000) !=
(px->core_frequency * 1000))) {
printk(KERN_ERR FW_BUG PREFIX
- "Invalid BIOS _PSS frequency: 0x%llx MHz\n",
- px->core_frequency);
- result = -EFAULT;
- kfree(pr->performance->states);
- goto end;
+ "Invalid BIOS _PSS frequency found for processor %d: 0x%llx MHz\n",
+ pr->id, px->core_frequency);
+ if (last_invalid == -1)
+ last_invalid = i;
+ } else {
+ if (last_invalid != -1) {
+ /*
+ * Copy this valid entry over last_invalid entry
+ */
+ memcpy(&(pr->performance->states[last_invalid]),
+ px, sizeof(struct acpi_processor_px));
+ ++last_invalid;
+ }
}
}
+ if (last_invalid == 0) {
+ printk(KERN_ERR FW_BUG PREFIX
+ "No valid BIOS _PSS frequency found for processor %d\n", pr->id);
+ result = -EFAULT;
+ kfree(pr->performance->states);
+ pr->performance->states = NULL;
+ }
+
+ if (last_invalid > 0)
+ pr->performance->state_count = last_invalid;
+
end:
kfree(buffer.pointer);
ACPI_BUS_TYPE_POWER_BUTTON,
ACPI_STA_DEFAULT,
&ops);
+ device_init_wakeup(&device->dev, true);
}
if ((acpi_gbl_FADT.flags & ACPI_FADT_SLEEP_BUTTON) == 0) {
MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".);
static u8 sleep_states[ACPI_S_STATE_COUNT];
+static bool pwr_btn_event_pending;
static void acpi_sleep_tts_switch(u32 acpi_state)
{
static int acpi_pm_freeze(void)
{
acpi_disable_all_gpes();
- acpi_os_wait_events_complete(NULL);
+ acpi_os_wait_events_complete();
acpi_ec_block_transactions();
return 0;
}
return error;
}
+static int find_powerf_dev(struct device *dev, void *data)
+{
+ struct acpi_device *device = to_acpi_device(dev);
+ const char *hid = acpi_device_hid(device);
+
+ return !strcmp(hid, ACPI_BUTTON_HID_POWERF);
+}
+
/**
* acpi_pm_finish - Instruct the platform to leave a sleep state.
*
*/
static void acpi_pm_finish(void)
{
+ struct device *pwr_btn_dev;
u32 acpi_state = acpi_target_sleep_state;
acpi_ec_unblock_transactions();
acpi_set_firmware_waking_vector((acpi_physical_address) 0);
acpi_target_sleep_state = ACPI_STATE_S0;
+
+ /* If we were woken with the fixed power button, provide a small
+ * hint to userspace in the form of a wakeup event on the fixed power
+ * button device (if it can be found).
+ *
+ * We delay the event generation til now, as the PM layer requires
+ * timekeeping to be running before we generate events. */
+ if (!pwr_btn_event_pending)
+ return;
+
+ pwr_btn_event_pending = false;
+ pwr_btn_dev = bus_find_device(&acpi_bus_type, NULL, NULL,
+ find_powerf_dev);
+ if (pwr_btn_dev) {
+ pm_wakeup_event(pwr_btn_dev, 0);
+ put_device(pwr_btn_dev);
+ }
}
/**
/* ACPI 3.0 specs (P62) says that it's the responsibility
* of the OSPM to clear the status bit [ implying that the
* POWER_BUTTON event should not reach userspace ]
+ *
+ * However, we do generate a small hint for userspace in the form of
+ * a wakeup event. We flag this condition for now and generate the
+ * event later, as we're currently too early in resume to be able to
+ * generate wakeup events.
*/
- if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3))
- acpi_clear_event(ACPI_EVENT_POWER_BUTTON);
+ if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3)) {
+ acpi_event_status pwr_btn_status;
+
+ acpi_get_event_status(ACPI_EVENT_POWER_BUTTON, &pwr_btn_status);
+
+ if (pwr_btn_status & ACPI_EVENT_FLAG_SET) {
+ acpi_clear_event(ACPI_EVENT_POWER_BUTTON);
+ /* Flag for later */
+ pwr_btn_event_pending = true;
+ }
+ }
/*
* Disable and clear GPE status before interrupt is enabled. Some GPEs
* can wake the system. _S0W may be valid, too.
*/
if (acpi_target_sleep_state == ACPI_STATE_S0 ||
- (device_may_wakeup(dev) &&
- adev->wakeup.sleep_state <= acpi_target_sleep_state)) {
+ (device_may_wakeup(dev) && adev->wakeup.flags.valid &&
+ adev->wakeup.sleep_state >= acpi_target_sleep_state)) {
acpi_status status;
acpi_method[3] = 'W';
{
int result = 0;
- if (!strncmp(val, "enable", strlen("enable") - 1)) {
+ if (!strncmp(val, "enable", strlen("enable"))) {
result = acpi_debug_trace(trace_method_name, trace_debug_level,
trace_debug_layer, 0);
if (result)
goto exit;
}
- if (!strncmp(val, "disable", strlen("disable") - 1)) {
+ if (!strncmp(val, "disable", strlen("disable"))) {
int name = 0;
result = acpi_debug_trace((char *)&name, trace_debug_level,
trace_debug_layer, 0);
return 0;
}
-static const char enabled[] = "kernel";
-static const char disabled[] = "user";
static int thermal_get_mode(struct thermal_zone_device *thermal,
enum thermal_device_mode *mode)
{
if (enable != tz->tz_enabled) {
tz->tz_enabled = enable;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "%s ACPI thermal control\n",
- tz->tz_enabled ? enabled : disabled));
+ "%s kernel ACPI thermal control\n",
+ tz->tz_enabled ? "Enable" : "Disable"));
acpi_thermal_check(tz);
}
return 0;
if (tz->trips.passive.flags.valid)
tz->thermal_zone =
- thermal_zone_device_register("acpitz", trips, tz,
+ thermal_zone_device_register("acpitz", trips, 0, tz,
&acpi_thermal_zone_ops,
tz->trips.passive.tc1,
tz->trips.passive.tc2,
tz->polling_frequency*100);
else
tz->thermal_zone =
- thermal_zone_device_register("acpitz", trips, tz,
+ thermal_zone_device_register("acpitz", trips, 0, tz,
&acpi_thermal_zone_ops,
0, 0, 0,
tz->polling_frequency*100);
union acpi_object arg0 = { ACPI_TYPE_INTEGER };
struct acpi_object_list args = { 1, &arg0 };
+ if (!video->cap._DOS)
+ return 0;
if (bios_flag < 0 || bios_flag > 3 || lcd_flag < 0 || lcd_flag > 1)
return -EINVAL;
set_bit(KEY_BRIGHTNESS_ZERO, input->keybit);
set_bit(KEY_DISPLAY_OFF, input->keybit);
- error = input_register_device(input);
- if (error)
- goto err_stop_video;
-
printk(KERN_INFO PREFIX "%s [%s] (multi-head: %s rom: %s post: %s)\n",
ACPI_VIDEO_DEVICE_NAME, acpi_device_bid(device),
video->flags.multihead ? "yes" : "no",
video->pm_nb.priority = 0;
error = register_pm_notifier(&video->pm_nb);
if (error)
- goto err_unregister_input_dev;
+ goto err_stop_video;
+
+ error = input_register_device(input);
+ if (error)
+ goto err_unregister_pm_notifier;
return 0;
- err_unregister_input_dev:
- input_unregister_device(input);
+ err_unregister_pm_notifier:
+ unregister_pm_notifier(&video->pm_nb);
err_stop_video:
acpi_video_bus_stop_devices(video);
err_free_input_dev:
return 0;
}
+static int __init is_i740(struct pci_dev *dev)
+{
+ if (dev->device == 0x00D1)
+ return 1;
+ if (dev->device == 0x7000)
+ return 1;
+ return 0;
+}
+
static int __init intel_opregion_present(void)
{
-#if defined(CONFIG_DRM_I915) || defined(CONFIG_DRM_I915_MODULE)
+ int opregion = 0;
struct pci_dev *dev = NULL;
u32 address;
continue;
if (dev->vendor != PCI_VENDOR_ID_INTEL)
continue;
+ /* We don't want to poke around undefined i740 registers */
+ if (is_i740(dev))
+ continue;
pci_read_config_dword(dev, 0xfc, &address);
if (!address)
continue;
- return 1;
+ opregion = 1;
}
-#endif
- return 0;
+ return opregion;
}
int acpi_video_register(void)
* Arasan Compact Flash host controller source file
*
* Copyright (C) 2011 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
module_platform_driver(arasan_cf_driver);
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_DESCRIPTION("Arasan ATA Compact Flash driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:" DRIVER_NAME);
#include <linux/wait.h>
#include <linux/async.h>
#include <linux/pm_runtime.h>
+#include <scsi/scsi_scan.h>
#include "base.h"
#include "power/power.h"
mutex_lock(&deferred_probe_mutex);
if (list_empty(&dev->p->deferred_probe)) {
dev_dbg(dev, "Added to deferred list\n");
- list_add(&dev->p->deferred_probe, &deferred_probe_pending_list);
+ list_add_tail(&dev->p->deferred_probe, &deferred_probe_pending_list);
}
mutex_unlock(&deferred_probe_mutex);
}
/* wait for the known devices to complete their probing */
wait_event(probe_waitqueue, atomic_read(&probe_count) == 0);
async_synchronize_full();
+ scsi_complete_async_scans();
}
EXPORT_SYMBOL_GPL(wait_for_device_probe);
dpm_wait_for_children(dev, async);
if (async_error)
- return 0;
+ goto Complete;
pm_runtime_get_noresume(dev);
if (pm_runtime_barrier(dev) && device_may_wakeup(dev))
if (pm_wakeup_pending()) {
pm_runtime_put_sync(dev);
async_error = -EBUSY;
- return 0;
+ goto Complete;
}
device_lock(dev);
}
device_unlock(dev);
+
+ Complete:
complete_all(&dev->power.completion);
if (error) {
map->lock = regmap_lock_mutex;
map->unlock = regmap_unlock_mutex;
}
- map->format.buf_size = (config->reg_bits + config->val_bits) / 8;
map->format.reg_bytes = DIV_ROUND_UP(config->reg_bits, 8);
map->format.pad_bytes = config->pad_bits / 8;
map->format.val_bytes = DIV_ROUND_UP(config->val_bits, 8);
- map->format.buf_size += map->format.pad_bytes;
+ map->format.buf_size = DIV_ROUND_UP(config->reg_bits +
+ config->val_bits + config->pad_bits, 8);
map->reg_shift = config->pad_bits % 8;
if (config->reg_stride)
map->reg_stride = config->reg_stride;
ret = regcache_init(map, config);
if (ret < 0)
- goto err_free_workbuf;
+ goto err_debugfs;
/* Add a devres resource for dev_get_regmap() */
m = devres_alloc(dev_get_regmap_release, sizeof(*m), GFP_KERNEL);
err_cache:
regcache_exit(map);
-err_free_workbuf:
+err_debugfs:
+ regmap_debugfs_exit(map);
kfree(map->work_buf);
err_map:
kfree(map);
return ret;
}
+EXPORT_SYMBOL_GPL(regmap_reinit_cache);
/**
* regmap_exit(): Free a previously allocated register map
bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x7);
break;
case 0x4331:
- /* BCM4331 workaround is SPROM-related, we put it in sprom.c */
+ case 43431:
+ /* Ext PA lines must be enabled for tx on BCM4331 */
+ bcma_chipco_bcm4331_ext_pa_lines_ctl(cc, true);
break;
case 43224:
if (bus->chipinfo.rev == 0) {
int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core,
bool enable)
{
- struct pci_dev *pdev = pc->core->bus->host_pci;
+ struct pci_dev *pdev;
u32 coremask, tmp;
int err = 0;
- if (core->bus->hosttype != BCMA_HOSTTYPE_PCI) {
+ if (!pc || core->bus->hosttype != BCMA_HOSTTYPE_PCI) {
/* This bcma device is not on a PCI host-bus. So the IRQs are
* not routed through the PCI core.
* So we must not enable routing through the PCI core. */
goto out;
}
+ pdev = pc->core->bus->host_pci;
+
err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
if (err)
goto out;
if (!sprom)
return -ENOMEM;
- if (bus->chipinfo.id == 0x4331)
+ if (bus->chipinfo.id == 0x4331 || bus->chipinfo.id == 43431)
bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false);
pr_debug("SPROM offset 0x%x\n", offset);
bcma_sprom_read(bus, offset, sprom);
- if (bus->chipinfo.id == 0x4331)
+ if (bus->chipinfo.id == 0x4331 || bus->chipinfo.id == 43431)
bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true);
err = bcma_sprom_valid(sprom);
first_word = 0;
spin_lock_irq(&b->bm_lock);
}
-
/* last page (respectively only page, for first page == last page) */
last_word = MLPP(el >> LN2_BPL);
- bm_set_full_words_within_one_page(mdev->bitmap, last_page, first_word, last_word);
+
+ /* consider bitmap->bm_bits = 32768, bitmap->bm_number_of_pages = 1. (or multiples).
+ * ==> e = 32767, el = 32768, last_page = 2,
+ * and now last_word = 0.
+ * We do not want to touch last_page in this case,
+ * as we did not allocate it, it is not present in bitmap->bm_pages.
+ */
+ if (last_word)
+ bm_set_full_words_within_one_page(mdev->bitmap, last_page, first_word, last_word);
/* possibly trailing bits.
* example: (e & 63) == 63, el will be e+1.
req->rq_state |= RQ_LOCAL_COMPLETED;
req->rq_state &= ~RQ_LOCAL_PENDING;
- D_ASSERT(!(req->rq_state & RQ_NET_MASK));
+ if (req->rq_state & RQ_LOCAL_ABORTED) {
+ _req_may_be_done(req, m);
+ break;
+ }
__drbd_chk_io_error(mdev, false);
goto_queue_for_net_read:
+ D_ASSERT(!(req->rq_state & RQ_NET_MASK));
+
/* no point in retrying if there is no good remote data,
* or we have no connection. */
if (mdev->state.pdsk != D_UP_TO_DATE) {
return 0 == drbd_bm_count_bits(mdev, sbnr, ebnr);
}
+static void maybe_pull_ahead(struct drbd_conf *mdev)
+{
+ int congested = 0;
+
+ /* If I don't even have good local storage, we can not reasonably try
+ * to pull ahead of the peer. We also need the local reference to make
+ * sure mdev->act_log is there.
+ * Note: caller has to make sure that net_conf is there.
+ */
+ if (!get_ldev_if_state(mdev, D_UP_TO_DATE))
+ return;
+
+ if (mdev->net_conf->cong_fill &&
+ atomic_read(&mdev->ap_in_flight) >= mdev->net_conf->cong_fill) {
+ dev_info(DEV, "Congestion-fill threshold reached\n");
+ congested = 1;
+ }
+
+ if (mdev->act_log->used >= mdev->net_conf->cong_extents) {
+ dev_info(DEV, "Congestion-extents threshold reached\n");
+ congested = 1;
+ }
+
+ if (congested) {
+ queue_barrier(mdev); /* last barrier, after mirrored writes */
+
+ if (mdev->net_conf->on_congestion == OC_PULL_AHEAD)
+ _drbd_set_state(_NS(mdev, conn, C_AHEAD), 0, NULL);
+ else /*mdev->net_conf->on_congestion == OC_DISCONNECT */
+ _drbd_set_state(_NS(mdev, conn, C_DISCONNECTING), 0, NULL);
+ }
+ put_ldev(mdev);
+}
+
static int drbd_make_request_common(struct drbd_conf *mdev, struct bio *bio, unsigned long start_time)
{
const int rw = bio_rw(bio);
_req_mod(req, queue_for_send_oos);
if (remote &&
- mdev->net_conf->on_congestion != OC_BLOCK && mdev->agreed_pro_version >= 96) {
- int congested = 0;
-
- if (mdev->net_conf->cong_fill &&
- atomic_read(&mdev->ap_in_flight) >= mdev->net_conf->cong_fill) {
- dev_info(DEV, "Congestion-fill threshold reached\n");
- congested = 1;
- }
-
- if (mdev->act_log->used >= mdev->net_conf->cong_extents) {
- dev_info(DEV, "Congestion-extents threshold reached\n");
- congested = 1;
- }
-
- if (congested) {
- queue_barrier(mdev); /* last barrier, after mirrored writes */
-
- if (mdev->net_conf->on_congestion == OC_PULL_AHEAD)
- _drbd_set_state(_NS(mdev, conn, C_AHEAD), 0, NULL);
- else /*mdev->net_conf->on_congestion == OC_DISCONNECT */
- _drbd_set_state(_NS(mdev, conn, C_DISCONNECTING), 0, NULL);
- }
- }
+ mdev->net_conf->on_congestion != OC_BLOCK && mdev->agreed_pro_version >= 96)
+ maybe_pull_ahead(mdev);
spin_unlock_irq(&mdev->req_lock);
kfree(b); /* if someone else has beaten us to it... */
if (drive == current_reqD)
drive = current_drive;
+ __cancel_delayed_work(&fd_timeout);
if (drive < 0 || drive >= N_DRIVE) {
delay = 20UL * HZ;
struct gendisk *disk;
int err;
+ err = -ENOMEM;
lo = kzalloc(sizeof(*lo), GFP_KERNEL);
- if (!lo) {
- err = -ENOMEM;
+ if (!lo)
goto out;
- }
- err = idr_pre_get(&loop_index_idr, GFP_KERNEL);
- if (err < 0)
+ if (!idr_pre_get(&loop_index_idr, GFP_KERNEL))
goto out_free_dev;
if (i >= 0) {
#include <linux/kthread.h>
#include <../drivers/ata/ahci.h>
#include <linux/export.h>
+#include <linux/debugfs.h>
#include "mtip32xx.h"
#define HW_CMD_SLOT_SZ (MTIP_MAX_COMMAND_SLOTS * 32)
* allocated in mtip_init().
*/
static int mtip_major;
+static struct dentry *dfs_parent;
static DEFINE_SPINLOCK(rssd_index_lock);
static DEFINE_IDA(rssd_index_ida);
}
/*
- * Sysfs register/status dump.
+ * Sysfs status dump.
*
* @dev Pointer to the device structure, passed by the kernrel.
* @attr Pointer to the device_attribute structure passed by the kernel.
* return value
* The size, in bytes, of the data copied into buf.
*/
-static ssize_t mtip_hw_show_registers(struct device *dev,
+static ssize_t mtip_hw_show_status(struct device *dev,
struct device_attribute *attr,
char *buf)
{
- u32 group_allocated;
struct driver_data *dd = dev_to_disk(dev)->private_data;
int size = 0;
+
+ if (test_bit(MTIP_DDF_OVER_TEMP_BIT, &dd->dd_flag))
+ size += sprintf(buf, "%s", "thermal_shutdown\n");
+ else if (test_bit(MTIP_DDF_WRITE_PROTECT_BIT, &dd->dd_flag))
+ size += sprintf(buf, "%s", "write_protect\n");
+ else
+ size += sprintf(buf, "%s", "online\n");
+
+ return size;
+}
+
+static DEVICE_ATTR(status, S_IRUGO, mtip_hw_show_status, NULL);
+
+static ssize_t mtip_hw_read_registers(struct file *f, char __user *ubuf,
+ size_t len, loff_t *offset)
+{
+ struct driver_data *dd = (struct driver_data *)f->private_data;
+ char buf[MTIP_DFS_MAX_BUF_SIZE];
+ u32 group_allocated;
+ int size = *offset;
int n;
- size += sprintf(&buf[size], "Hardware\n--------\n");
- size += sprintf(&buf[size], "S ACTive : [ 0x");
+ if (!len || size)
+ return 0;
+
+ if (size < 0)
+ return -EINVAL;
+
+ size += sprintf(&buf[size], "H/ S ACTive : [ 0x");
for (n = dd->slot_groups-1; n >= 0; n--)
size += sprintf(&buf[size], "%08X ",
readl(dd->port->s_active[n]));
size += sprintf(&buf[size], "]\n");
- size += sprintf(&buf[size], "Command Issue : [ 0x");
+ size += sprintf(&buf[size], "H/ Command Issue : [ 0x");
for (n = dd->slot_groups-1; n >= 0; n--)
size += sprintf(&buf[size], "%08X ",
readl(dd->port->cmd_issue[n]));
size += sprintf(&buf[size], "]\n");
- size += sprintf(&buf[size], "Completed : [ 0x");
+ size += sprintf(&buf[size], "H/ Completed : [ 0x");
for (n = dd->slot_groups-1; n >= 0; n--)
size += sprintf(&buf[size], "%08X ",
readl(dd->port->completed[n]));
size += sprintf(&buf[size], "]\n");
- size += sprintf(&buf[size], "PORT IRQ STAT : [ 0x%08X ]\n",
+ size += sprintf(&buf[size], "H/ PORT IRQ STAT : [ 0x%08X ]\n",
readl(dd->port->mmio + PORT_IRQ_STAT));
- size += sprintf(&buf[size], "HOST IRQ STAT : [ 0x%08X ]\n",
+ size += sprintf(&buf[size], "H/ HOST IRQ STAT : [ 0x%08X ]\n",
readl(dd->mmio + HOST_IRQ_STAT));
size += sprintf(&buf[size], "\n");
- size += sprintf(&buf[size], "Local\n-----\n");
- size += sprintf(&buf[size], "Allocated : [ 0x");
+ size += sprintf(&buf[size], "L/ Allocated : [ 0x");
for (n = dd->slot_groups-1; n >= 0; n--) {
if (sizeof(long) > sizeof(u32))
}
size += sprintf(&buf[size], "]\n");
- size += sprintf(&buf[size], "Commands in Q: [ 0x");
+ size += sprintf(&buf[size], "L/ Commands in Q : [ 0x");
for (n = dd->slot_groups-1; n >= 0; n--) {
if (sizeof(long) > sizeof(u32))
}
size += sprintf(&buf[size], "]\n");
- return size;
+ *offset = size <= len ? size : len;
+ size = copy_to_user(ubuf, buf, *offset);
+ if (size)
+ return -EFAULT;
+
+ return *offset;
}
-static ssize_t mtip_hw_show_status(struct device *dev,
- struct device_attribute *attr,
- char *buf)
+static ssize_t mtip_hw_read_flags(struct file *f, char __user *ubuf,
+ size_t len, loff_t *offset)
{
- struct driver_data *dd = dev_to_disk(dev)->private_data;
- int size = 0;
+ struct driver_data *dd = (struct driver_data *)f->private_data;
+ char buf[MTIP_DFS_MAX_BUF_SIZE];
+ int size = *offset;
- if (test_bit(MTIP_DDF_OVER_TEMP_BIT, &dd->dd_flag))
- size += sprintf(buf, "%s", "thermal_shutdown\n");
- else if (test_bit(MTIP_DDF_WRITE_PROTECT_BIT, &dd->dd_flag))
- size += sprintf(buf, "%s", "write_protect\n");
- else
- size += sprintf(buf, "%s", "online\n");
-
- return size;
-}
+ if (!len || size)
+ return 0;
-static ssize_t mtip_hw_show_flags(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct driver_data *dd = dev_to_disk(dev)->private_data;
- int size = 0;
+ if (size < 0)
+ return -EINVAL;
- size += sprintf(&buf[size], "Flag in port struct : [ %08lX ]\n",
+ size += sprintf(&buf[size], "Flag-port : [ %08lX ]\n",
dd->port->flags);
- size += sprintf(&buf[size], "Flag in dd struct : [ %08lX ]\n",
+ size += sprintf(&buf[size], "Flag-dd : [ %08lX ]\n",
dd->dd_flag);
- return size;
+ *offset = size <= len ? size : len;
+ size = copy_to_user(ubuf, buf, *offset);
+ if (size)
+ return -EFAULT;
+
+ return *offset;
}
-static DEVICE_ATTR(registers, S_IRUGO, mtip_hw_show_registers, NULL);
-static DEVICE_ATTR(status, S_IRUGO, mtip_hw_show_status, NULL);
-static DEVICE_ATTR(flags, S_IRUGO, mtip_hw_show_flags, NULL);
+static const struct file_operations mtip_regs_fops = {
+ .owner = THIS_MODULE,
+ .open = simple_open,
+ .read = mtip_hw_read_registers,
+ .llseek = no_llseek,
+};
+
+static const struct file_operations mtip_flags_fops = {
+ .owner = THIS_MODULE,
+ .open = simple_open,
+ .read = mtip_hw_read_flags,
+ .llseek = no_llseek,
+};
/*
* Create the sysfs related attributes.
if (!kobj || !dd)
return -EINVAL;
- if (sysfs_create_file(kobj, &dev_attr_registers.attr))
- dev_warn(&dd->pdev->dev,
- "Error creating 'registers' sysfs entry\n");
if (sysfs_create_file(kobj, &dev_attr_status.attr))
dev_warn(&dd->pdev->dev,
"Error creating 'status' sysfs entry\n");
- if (sysfs_create_file(kobj, &dev_attr_flags.attr))
- dev_warn(&dd->pdev->dev,
- "Error creating 'flags' sysfs entry\n");
return 0;
}
if (!kobj || !dd)
return -EINVAL;
- sysfs_remove_file(kobj, &dev_attr_registers.attr);
sysfs_remove_file(kobj, &dev_attr_status.attr);
- sysfs_remove_file(kobj, &dev_attr_flags.attr);
return 0;
}
+static int mtip_hw_debugfs_init(struct driver_data *dd)
+{
+ if (!dfs_parent)
+ return -1;
+
+ dd->dfs_node = debugfs_create_dir(dd->disk->disk_name, dfs_parent);
+ if (IS_ERR_OR_NULL(dd->dfs_node)) {
+ dev_warn(&dd->pdev->dev,
+ "Error creating node %s under debugfs\n",
+ dd->disk->disk_name);
+ dd->dfs_node = NULL;
+ return -1;
+ }
+
+ debugfs_create_file("flags", S_IRUGO, dd->dfs_node, dd,
+ &mtip_flags_fops);
+ debugfs_create_file("registers", S_IRUGO, dd->dfs_node, dd,
+ &mtip_regs_fops);
+
+ return 0;
+}
+
+static void mtip_hw_debugfs_exit(struct driver_data *dd)
+{
+ debugfs_remove_recursive(dd->dfs_node);
+}
+
+
/*
* Perform any init/resume time hardware setup
*
mtip_hw_sysfs_init(dd, kobj);
kobject_put(kobj);
}
+ mtip_hw_debugfs_init(dd);
if (dd->mtip_svc_handler) {
set_bit(MTIP_DDF_INIT_DONE_BIT, &dd->dd_flag);
return rv;
kthread_run_error:
+ mtip_hw_debugfs_exit(dd);
+
/* Delete our gendisk. This also removes the device from /dev */
del_gendisk(dd->disk);
kobject_put(kobj);
}
}
+ mtip_hw_debugfs_exit(dd);
/*
* Delete our gendisk structure. This also removes the device
}
mtip_major = error;
+ if (!dfs_parent) {
+ dfs_parent = debugfs_create_dir("rssd", NULL);
+ if (IS_ERR_OR_NULL(dfs_parent)) {
+ printk(KERN_WARNING "Error creating debugfs parent\n");
+ dfs_parent = NULL;
+ }
+ }
+
/* Register our PCI operations. */
error = pci_register_driver(&mtip_pci_driver);
- if (error)
+ if (error) {
+ debugfs_remove(dfs_parent);
unregister_blkdev(mtip_major, MTIP_DRV_NAME);
+ }
return error;
}
*/
static void __exit mtip_exit(void)
{
+ debugfs_remove_recursive(dfs_parent);
+
/* Release the allocated major block device number. */
unregister_blkdev(mtip_major, MTIP_DRV_NAME);
#include <linux/ata.h>
#include <linux/interrupt.h>
#include <linux/genhd.h>
-#include <linux/version.h>
/* Offset of Subsystem Device ID in pci confoguration space */
#define PCI_SUBSYSTEM_DEVICEID 0x2E
#define dbg_printk(format, arg...)
#endif
+#define MTIP_DFS_MAX_BUF_SIZE 1024
+
#define __force_bit2int (unsigned int __force)
enum {
unsigned long dd_flag; /* NOTE: use atomic bit operations on this */
struct task_struct *mtip_svc_handler; /* task_struct of svc thd */
+
+ struct dentry *dfs_node;
};
#endif
/ sizeof (*ondisk))
return -EINVAL;
header->snapc = kmalloc(sizeof(struct ceph_snap_context) +
- snap_count * sizeof (*ondisk),
+ snap_count * sizeof(u64),
gfp_flags);
if (!header->snapc)
return -ENOMEM;
op = (void *)(replyhead + 1);
rc = le32_to_cpu(replyhead->result);
bytes = le64_to_cpu(op->extent.length);
- read_op = (le32_to_cpu(op->op) == CEPH_OSD_OP_READ);
+ read_op = (le16_to_cpu(op->op) == CEPH_OSD_OP_READ);
dout("rbd_req_cb bytes=%lld readop=%d rc=%d\n", bytes, read_op, rc);
}
}
+struct mm_plug_cb {
+ struct blk_plug_cb cb;
+ struct cardinfo *card;
+};
+
+static void mm_unplug(struct blk_plug_cb *cb)
+{
+ struct mm_plug_cb *mmcb = container_of(cb, struct mm_plug_cb, cb);
+
+ spin_lock_irq(&mmcb->card->lock);
+ activate(mmcb->card);
+ spin_unlock_irq(&mmcb->card->lock);
+ kfree(mmcb);
+}
+
+static int mm_check_plugged(struct cardinfo *card)
+{
+ struct blk_plug *plug = current->plug;
+ struct mm_plug_cb *mmcb;
+
+ if (!plug)
+ return 0;
+
+ list_for_each_entry(mmcb, &plug->cb_list, cb.list) {
+ if (mmcb->cb.callback == mm_unplug && mmcb->card == card)
+ return 1;
+ }
+ /* Not currently on the callback list */
+ mmcb = kmalloc(sizeof(*mmcb), GFP_ATOMIC);
+ if (!mmcb)
+ return 0;
+
+ mmcb->card = card;
+ mmcb->cb.callback = mm_unplug;
+ list_add(&mmcb->cb.list, &plug->cb_list);
+ return 1;
+}
+
static void mm_make_request(struct request_queue *q, struct bio *bio)
{
struct cardinfo *card = q->queuedata;
*card->biotail = bio;
bio->bi_next = NULL;
card->biotail = &bio->bi_next;
+ if (bio->bi_rw & REQ_SYNC || !mm_check_plugged(card))
+ activate(card);
spin_unlock_irq(&card->lock);
return;
break;
case BLKIF_OP_DISCARD:
dst->u.discard.flag = src->u.discard.flag;
+ dst->u.discard.id = src->u.discard.id;
dst->u.discard.sector_number = src->u.discard.sector_number;
dst->u.discard.nr_sectors = src->u.discard.nr_sectors;
break;
break;
case BLKIF_OP_DISCARD:
dst->u.discard.flag = src->u.discard.flag;
+ dst->u.discard.id = src->u.discard.id;
dst->u.discard.sector_number = src->u.discard.sector_number;
dst->u.discard.nr_sectors = src->u.discard.nr_sectors;
break;
return free;
}
-static void add_id_to_freelist(struct blkfront_info *info,
+static int add_id_to_freelist(struct blkfront_info *info,
unsigned long id)
{
+ if (info->shadow[id].req.u.rw.id != id)
+ return -EINVAL;
+ if (info->shadow[id].request == NULL)
+ return -EINVAL;
info->shadow[id].req.u.rw.id = info->shadow_free;
info->shadow[id].request = NULL;
info->shadow_free = id;
+ return 0;
}
+static const char *op_name(int op)
+{
+ static const char *const names[] = {
+ [BLKIF_OP_READ] = "read",
+ [BLKIF_OP_WRITE] = "write",
+ [BLKIF_OP_WRITE_BARRIER] = "barrier",
+ [BLKIF_OP_FLUSH_DISKCACHE] = "flush",
+ [BLKIF_OP_DISCARD] = "discard" };
+
+ if (op < 0 || op >= ARRAY_SIZE(names))
+ return "unknown";
+
+ if (!names[op])
+ return "reserved";
+
+ return names[op];
+}
static int xlbd_reserve_minors(unsigned int minor, unsigned int nr)
{
unsigned int end = minor + nr;
bret = RING_GET_RESPONSE(&info->ring, i);
id = bret->id;
+ /*
+ * The backend has messed up and given us an id that we would
+ * never have given to it (we stamp it up to BLK_RING_SIZE -
+ * look in get_id_from_freelist.
+ */
+ if (id >= BLK_RING_SIZE) {
+ WARN(1, "%s: response to %s has incorrect id (%ld)\n",
+ info->gd->disk_name, op_name(bret->operation), id);
+ /* We can't safely get the 'struct request' as
+ * the id is busted. */
+ continue;
+ }
req = info->shadow[id].request;
if (bret->operation != BLKIF_OP_DISCARD)
blkif_completion(&info->shadow[id]);
- add_id_to_freelist(info, id);
+ if (add_id_to_freelist(info, id)) {
+ WARN(1, "%s: response to %s (id %ld) couldn't be recycled!\n",
+ info->gd->disk_name, op_name(bret->operation), id);
+ continue;
+ }
error = (bret->status == BLKIF_RSP_OKAY) ? 0 : -EIO;
switch (bret->operation) {
case BLKIF_OP_DISCARD:
if (unlikely(bret->status == BLKIF_RSP_EOPNOTSUPP)) {
struct request_queue *rq = info->rq;
- printk(KERN_WARNING "blkfront: %s: discard op failed\n",
- info->gd->disk_name);
+ printk(KERN_WARNING "blkfront: %s: %s op failed\n",
+ info->gd->disk_name, op_name(bret->operation));
error = -EOPNOTSUPP;
info->feature_discard = 0;
info->feature_secdiscard = 0;
case BLKIF_OP_FLUSH_DISKCACHE:
case BLKIF_OP_WRITE_BARRIER:
if (unlikely(bret->status == BLKIF_RSP_EOPNOTSUPP)) {
- printk(KERN_WARNING "blkfront: %s: write %s op failed\n",
- info->flush_op == BLKIF_OP_WRITE_BARRIER ?
- "barrier" : "flush disk cache",
- info->gd->disk_name);
+ printk(KERN_WARNING "blkfront: %s: %s op failed\n",
+ info->gd->disk_name, op_name(bret->operation));
error = -EOPNOTSUPP;
}
if (unlikely(bret->status == BLKIF_RSP_ERROR &&
info->shadow[id].req.u.rw.nr_segments == 0)) {
- printk(KERN_WARNING "blkfront: %s: empty write %s op failed\n",
- info->flush_op == BLKIF_OP_WRITE_BARRIER ?
- "barrier" : "flush disk cache",
- info->gd->disk_name);
+ printk(KERN_WARNING "blkfront: %s: empty %s op failed\n",
+ info->gd->disk_name, op_name(bret->operation));
error = -EOPNOTSUPP;
}
if (unlikely(error)) {
/* Atheros AR3011 with sflash firmware*/
{ USB_DEVICE(0x0CF3, 0x3002) },
+ { USB_DEVICE(0x0CF3, 0xE019) },
{ USB_DEVICE(0x13d3, 0x3304) },
{ USB_DEVICE(0x0930, 0x0215) },
{ USB_DEVICE(0x0489, 0xE03D) },
{ USB_DEVICE(0x04CA, 0x3005) },
{ USB_DEVICE(0x13d3, 0x3362) },
{ USB_DEVICE(0x0CF3, 0xE004) },
+ { USB_DEVICE(0x0930, 0x0219) },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE02C) },
{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
void btmrvl_interrupt(struct btmrvl_private *priv);
-void btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb);
+bool btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb);
int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb);
int btmrvl_send_module_cfg_cmd(struct btmrvl_private *priv, int subcmd);
}
EXPORT_SYMBOL_GPL(btmrvl_interrupt);
-void btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb)
+bool btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb)
{
struct hci_event_hdr *hdr = (void *) skb->data;
struct hci_ev_cmd_complete *ec;
- u16 opcode, ocf;
+ u16 opcode, ocf, ogf;
if (hdr->evt == HCI_EV_CMD_COMPLETE) {
ec = (void *) (skb->data + HCI_EVENT_HDR_SIZE);
opcode = __le16_to_cpu(ec->opcode);
ocf = hci_opcode_ocf(opcode);
+ ogf = hci_opcode_ogf(opcode);
+
if (ocf == BT_CMD_MODULE_CFG_REQ &&
priv->btmrvl_dev.sendcmdflag) {
priv->btmrvl_dev.sendcmdflag = false;
priv->adapter->cmd_complete = true;
wake_up_interruptible(&priv->adapter->cmd_wait_q);
}
+
+ if (ogf == OGF) {
+ BT_DBG("vendor event skipped: ogf 0x%4.4x", ogf);
+ kfree_skb(skb);
+ return false;
+ }
}
+
+ return true;
}
EXPORT_SYMBOL_GPL(btmrvl_check_evtpkt);
skb_put(skb, buf_len);
skb_pull(skb, SDIO_HEADER_LEN);
- if (type == HCI_EVENT_PKT)
- btmrvl_check_evtpkt(priv, skb);
+ if (type == HCI_EVENT_PKT) {
+ if (btmrvl_check_evtpkt(priv, skb))
+ hci_recv_frame(skb);
+ } else
+ hci_recv_frame(skb);
- hci_recv_frame(skb);
hdev->stat.byte_rx += buf_len;
break;
/* Atheros 3011 with sflash firmware */
{ USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
+ { USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
ID(PCI_DEVICE_ID_INTEL_B43_HB),
ID(PCI_DEVICE_ID_INTEL_B43_1_HB),
ID(PCI_DEVICE_ID_INTEL_IRONLAKE_D_HB),
+ ID(PCI_DEVICE_ID_INTEL_IRONLAKE_D2_HB),
ID(PCI_DEVICE_ID_INTEL_IRONLAKE_M_HB),
ID(PCI_DEVICE_ID_INTEL_IRONLAKE_MA_HB),
ID(PCI_DEVICE_ID_INTEL_IRONLAKE_MC2_HB),
#define PCI_DEVICE_ID_INTEL_G41_HB 0x2E30
#define PCI_DEVICE_ID_INTEL_G41_IG 0x2E32
#define PCI_DEVICE_ID_INTEL_IRONLAKE_D_HB 0x0040
+#define PCI_DEVICE_ID_INTEL_IRONLAKE_D2_HB 0x0069
#define PCI_DEVICE_ID_INTEL_IRONLAKE_D_IG 0x0042
#define PCI_DEVICE_ID_INTEL_IRONLAKE_M_HB 0x0044
#define PCI_DEVICE_ID_INTEL_IRONLAKE_MA_HB 0x0062
u32 *data = buf;
/* data ready? */
- if (readl(trng->base + TRNG_ODATA) & 1) {
+ if (readl(trng->base + TRNG_ISR) & 1) {
*data = readl(trng->base + TRNG_ODATA);
+ /*
+ ensure data ready is only set again AFTER the next data
+ word is ready in case it got set between checking ISR
+ and reading ODATA, so we don't risk re-reading the
+ same word
+ */
+ readl(trng->base + TRNG_ISR);
return 4;
} else
return 0;
{
struct clk *child;
unsigned long old_rate;
+ unsigned long best_parent_rate = 0;
struct hlist_node *tmp;
old_rate = clk->rate;
+ if (clk->parent)
+ best_parent_rate = clk->parent->rate;
+
if (clk->ops->set_rate)
- clk->ops->set_rate(clk->hw, clk->new_rate, clk->parent->rate);
+ clk->ops->set_rate(clk->hw, clk->new_rate, best_parent_rate);
if (clk->ops->recalc_rate)
- clk->rate = clk->ops->recalc_rate(clk->hw,
- clk->parent->rate);
+ clk->rate = clk->ops->recalc_rate(clk->hw, best_parent_rate);
else
- clk->rate = clk->parent->rate;
+ clk->rate = best_parent_rate;
if (clk->notifier_count && old_rate != clk->rate)
__clk_notify(clk, POST_RATE_CHANGE, old_rate, clk->rate);
if (!clk->parents)
clk->parents =
- kmalloc((sizeof(struct clk*) * clk->num_parents),
+ kzalloc((sizeof(struct clk*) * clk->num_parents),
GFP_KERNEL);
if (!clk->parents)
old_parent = clk->parent;
- /* find index of new parent clock using cached parent ptrs */
- for (i = 0; i < clk->num_parents; i++)
- if (clk->parents[i] == parent)
- break;
+ if (!clk->parents)
+ clk->parents = kzalloc((sizeof(struct clk*) * clk->num_parents),
+ GFP_KERNEL);
/*
- * find index of new parent clock using string name comparison
- * also try to cache the parent to avoid future calls to __clk_lookup
+ * find index of new parent clock using cached parent ptrs,
+ * or if not yet cached, use string name comparison and cache
+ * them now to avoid future calls to __clk_lookup.
*/
- if (i == clk->num_parents)
- for (i = 0; i < clk->num_parents; i++)
- if (!strcmp(clk->parent_names[i], parent->name)) {
+ for (i = 0; i < clk->num_parents; i++) {
+ if (clk->parents && clk->parents[i] == parent)
+ break;
+ else if (!strcmp(clk->parent_names[i], parent->name)) {
+ if (clk->parents)
clk->parents[i] = __clk_lookup(parent->name);
- break;
- }
+ break;
+ }
+ }
if (i == clk->num_parents) {
pr_debug("%s: clock %s is not a possible parent of clock %s\n",
__mxs_setl(30 << BP_FRAC_IOFRAC, FRAC);
}
-static struct clk_lookup uart_lookups[] __initdata = {
+static struct clk_lookup uart_lookups[] = {
{ .dev_id = "duart", },
{ .dev_id = "mxs-auart.0", },
{ .dev_id = "mxs-auart.1", },
{ .dev_id = "80070000.serial", },
};
-static struct clk_lookup hbus_lookups[] __initdata = {
+static struct clk_lookup hbus_lookups[] = {
{ .dev_id = "imx23-dma-apbh", },
{ .dev_id = "80004000.dma-apbh", },
};
-static struct clk_lookup xbus_lookups[] __initdata = {
+static struct clk_lookup xbus_lookups[] = {
{ .dev_id = "duart", .con_id = "apb_pclk"},
{ .dev_id = "80070000.serial", .con_id = "apb_pclk"},
{ .dev_id = "imx23-dma-apbx", },
{ .dev_id = "80024000.dma-apbx", },
};
-static struct clk_lookup ssp_lookups[] __initdata = {
+static struct clk_lookup ssp_lookups[] = {
{ .dev_id = "imx23-mmc.0", },
{ .dev_id = "imx23-mmc.1", },
{ .dev_id = "80010000.ssp", },
{ .dev_id = "80034000.ssp", },
};
-static struct clk_lookup lcdif_lookups[] __initdata = {
+static struct clk_lookup lcdif_lookups[] = {
{ .dev_id = "imx23-fb", },
{ .dev_id = "80030000.lcdif", },
};
-static struct clk_lookup gpmi_lookups[] __initdata = {
+static struct clk_lookup gpmi_lookups[] = {
{ .dev_id = "imx23-gpmi-nand", },
{ .dev_id = "8000c000.gpmi", },
};
writel_relaxed(val, FRAC0);
}
-static struct clk_lookup uart_lookups[] __initdata = {
+static struct clk_lookup uart_lookups[] = {
{ .dev_id = "duart", },
{ .dev_id = "mxs-auart.0", },
{ .dev_id = "mxs-auart.1", },
{ .dev_id = "80074000.serial", },
};
-static struct clk_lookup hbus_lookups[] __initdata = {
+static struct clk_lookup hbus_lookups[] = {
{ .dev_id = "imx28-dma-apbh", },
{ .dev_id = "80004000.dma-apbh", },
};
-static struct clk_lookup xbus_lookups[] __initdata = {
+static struct clk_lookup xbus_lookups[] = {
{ .dev_id = "duart", .con_id = "apb_pclk"},
{ .dev_id = "80074000.serial", .con_id = "apb_pclk"},
{ .dev_id = "imx28-dma-apbx", },
{ .dev_id = "80024000.dma-apbx", },
};
-static struct clk_lookup ssp0_lookups[] __initdata = {
+static struct clk_lookup ssp0_lookups[] = {
{ .dev_id = "imx28-mmc.0", },
{ .dev_id = "80010000.ssp", },
};
-static struct clk_lookup ssp1_lookups[] __initdata = {
+static struct clk_lookup ssp1_lookups[] = {
{ .dev_id = "imx28-mmc.1", },
{ .dev_id = "80012000.ssp", },
};
-static struct clk_lookup ssp2_lookups[] __initdata = {
+static struct clk_lookup ssp2_lookups[] = {
{ .dev_id = "imx28-mmc.2", },
{ .dev_id = "80014000.ssp", },
};
-static struct clk_lookup ssp3_lookups[] __initdata = {
+static struct clk_lookup ssp3_lookups[] = {
{ .dev_id = "imx28-mmc.3", },
{ .dev_id = "80016000.ssp", },
};
-static struct clk_lookup lcdif_lookups[] __initdata = {
+static struct clk_lookup lcdif_lookups[] = {
{ .dev_id = "imx28-fb", },
{ .dev_id = "80030000.lcdif", },
};
-static struct clk_lookup gpmi_lookups[] __initdata = {
+static struct clk_lookup gpmi_lookups[] = {
{ .dev_id = "imx28-gpmi-nand", },
{ .dev_id = "8000c000.gpmi", },
};
-static struct clk_lookup fec_lookups[] __initdata = {
+static struct clk_lookup fec_lookups[] = {
{ .dev_id = "imx28-fec.0", },
{ .dev_id = "imx28-fec.1", },
{ .dev_id = "800f0000.ethernet", },
{ .dev_id = "800f4000.ethernet", },
};
-static struct clk_lookup can0_lookups[] __initdata = {
+static struct clk_lookup can0_lookups[] = {
{ .dev_id = "flexcan.0", },
{ .dev_id = "80032000.can", },
};
-static struct clk_lookup can1_lookups[] __initdata = {
+static struct clk_lookup can1_lookups[] = {
{ .dev_id = "flexcan.1", },
{ .dev_id = "80034000.can", },
};
-static struct clk_lookup saif0_lookups[] __initdata = {
+static struct clk_lookup saif0_lookups[] = {
{ .dev_id = "mxs-saif.0", },
{ .dev_id = "80042000.saif", },
};
-static struct clk_lookup saif1_lookups[] __initdata = {
+static struct clk_lookup saif1_lookups[] = {
{ .dev_id = "mxs-saif.1", },
{ .dev_id = "80046000.saif", },
};
clks[pll2] = mxs_clk_pll("pll2", "ref_xtal", PLL2CTRL0, 23, 50000000);
clks[ref_cpu] = mxs_clk_ref("ref_cpu", "pll0", FRAC0, 0);
clks[ref_emi] = mxs_clk_ref("ref_emi", "pll0", FRAC0, 1);
- clks[ref_io0] = mxs_clk_ref("ref_io0", "pll0", FRAC0, 2);
- clks[ref_io1] = mxs_clk_ref("ref_io1", "pll0", FRAC0, 3);
+ clks[ref_io1] = mxs_clk_ref("ref_io1", "pll0", FRAC0, 2);
+ clks[ref_io0] = mxs_clk_ref("ref_io0", "pll0", FRAC0, 3);
clks[ref_pix] = mxs_clk_ref("ref_pix", "pll0", FRAC1, 0);
clks[ref_hsadc] = mxs_clk_ref("ref_hsadc", "pll0", FRAC1, 1);
clks[ref_gpmi] = mxs_clk_ref("ref_gpmi", "pll0", FRAC1, 2);
/*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
/*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
/*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
/*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
/*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* Clock framework definitions for SPEAr platform
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr1310 machine clock framework source file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
/* clock parents */
static const char *vco_parents[] = { "osc_24m_clk", "osc_25m_clk", };
static const char *gpt_parents[] = { "osc_24m_clk", "apb_clk", };
-static const char *uart0_parents[] = { "pll5_clk", "uart_synth_gate_clk", };
-static const char *c3_parents[] = { "pll5_clk", "c3_synth_gate_clk", };
-static const char *gmac_phy_input_parents[] = { "gmii_125m_pad_clk", "pll2_clk",
+static const char *uart0_parents[] = { "pll5_clk", "uart_syn_gclk", };
+static const char *c3_parents[] = { "pll5_clk", "c3_syn_gclk", };
+static const char *gmac_phy_input_parents[] = { "gmii_pad_clk", "pll2_clk",
"osc_25m_clk", };
-static const char *gmac_phy_parents[] = { "gmac_phy_input_mux_clk",
- "gmac_phy_synth_gate_clk", };
+static const char *gmac_phy_parents[] = { "phy_input_mclk", "phy_syn_gclk", };
static const char *clcd_synth_parents[] = { "vco1div4_clk", "pll2_clk", };
-static const char *clcd_pixel_parents[] = { "pll5_clk", "clcd_synth_clk", };
+static const char *clcd_pixel_parents[] = { "pll5_clk", "clcd_syn_clk", };
static const char *i2s_src_parents[] = { "vco1div2_clk", "none", "pll3_clk",
"i2s_src_pad_clk", };
-static const char *i2s_ref_parents[] = { "i2s_src_mux_clk", "i2s_prs1_clk", };
+static const char *i2s_ref_parents[] = { "i2s_src_mclk", "i2s_prs1_clk", };
static const char *gen_synth0_1_parents[] = { "vco1div4_clk", "vco3div2_clk",
"pll3_clk", };
static const char *gen_synth2_3_parents[] = { "vco1div4_clk", "vco3div2_clk",
"pll2_clk", };
static const char *rmii_phy_parents[] = { "ras_tx50_clk", "none",
- "ras_pll2_clk", "ras_synth0_clk", };
+ "ras_pll2_clk", "ras_syn0_clk", };
static const char *smii_rgmii_phy_parents[] = { "none", "ras_tx125_clk",
- "ras_pll2_clk", "ras_synth0_clk", };
-static const char *uart_parents[] = { "ras_apb_clk", "gen_synth3_clk", };
-static const char *i2c_parents[] = { "ras_apb_clk", "gen_synth1_clk", };
-static const char *ssp1_parents[] = { "ras_apb_clk", "gen_synth1_clk",
+ "ras_pll2_clk", "ras_syn0_clk", };
+static const char *uart_parents[] = { "ras_apb_clk", "gen_syn3_clk", };
+static const char *i2c_parents[] = { "ras_apb_clk", "gen_syn1_clk", };
+static const char *ssp1_parents[] = { "ras_apb_clk", "gen_syn1_clk",
"ras_plclk0_clk", };
-static const char *pci_parents[] = { "ras_pll3_clk", "gen_synth2_clk", };
-static const char *tdm_parents[] = { "ras_pll3_clk", "gen_synth1_clk", };
+static const char *pci_parents[] = { "ras_pll3_clk", "gen_syn2_clk", };
+static const char *tdm_parents[] = { "ras_pll3_clk", "gen_syn1_clk", };
void __init spear1310_clk_init(void)
{
25000000);
clk_register_clkdev(clk, "osc_25m_clk", NULL);
- clk = clk_register_fixed_rate(NULL, "gmii_125m_pad_clk", NULL,
- CLK_IS_ROOT, 125000000);
- clk_register_clkdev(clk, "gmii_125m_pad_clk", NULL);
+ clk = clk_register_fixed_rate(NULL, "gmii_pad_clk", NULL, CLK_IS_ROOT,
+ 125000000);
+ clk_register_clkdev(clk, "gmii_pad_clk", NULL);
clk = clk_register_fixed_rate(NULL, "i2s_src_pad_clk", NULL,
CLK_IS_ROOT, 12288000);
/* clock derived from 24 or 25 MHz osc clk */
/* vco-pll */
- clk = clk_register_mux(NULL, "vco1_mux_clk", vco_parents,
+ clk = clk_register_mux(NULL, "vco1_mclk", vco_parents,
ARRAY_SIZE(vco_parents), 0, SPEAR1310_PLL_CFG,
SPEAR1310_PLL1_CLK_SHIFT, SPEAR1310_PLL_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "vco1_mux_clk", NULL);
- clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL, "vco1_mux_clk",
+ clk_register_clkdev(clk, "vco1_mclk", NULL);
+ clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL, "vco1_mclk",
0, SPEAR1310_PLL1_CTR, SPEAR1310_PLL1_FRQ, pll_rtbl,
ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
clk_register_clkdev(clk, "vco1_clk", NULL);
clk_register_clkdev(clk1, "pll1_clk", NULL);
- clk = clk_register_mux(NULL, "vco2_mux_clk", vco_parents,
+ clk = clk_register_mux(NULL, "vco2_mclk", vco_parents,
ARRAY_SIZE(vco_parents), 0, SPEAR1310_PLL_CFG,
SPEAR1310_PLL2_CLK_SHIFT, SPEAR1310_PLL_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "vco2_mux_clk", NULL);
- clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL, "vco2_mux_clk",
+ clk_register_clkdev(clk, "vco2_mclk", NULL);
+ clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL, "vco2_mclk",
0, SPEAR1310_PLL2_CTR, SPEAR1310_PLL2_FRQ, pll_rtbl,
ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
clk_register_clkdev(clk, "vco2_clk", NULL);
clk_register_clkdev(clk1, "pll2_clk", NULL);
- clk = clk_register_mux(NULL, "vco3_mux_clk", vco_parents,
+ clk = clk_register_mux(NULL, "vco3_mclk", vco_parents,
ARRAY_SIZE(vco_parents), 0, SPEAR1310_PLL_CFG,
SPEAR1310_PLL3_CLK_SHIFT, SPEAR1310_PLL_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "vco3_mux_clk", NULL);
- clk = clk_register_vco_pll("vco3_clk", "pll3_clk", NULL, "vco3_mux_clk",
+ clk_register_clkdev(clk, "vco3_mclk", NULL);
+ clk = clk_register_vco_pll("vco3_clk", "pll3_clk", NULL, "vco3_mclk",
0, SPEAR1310_PLL3_CTR, SPEAR1310_PLL3_FRQ, pll_rtbl,
ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
clk_register_clkdev(clk, "vco3_clk", NULL);
/* peripherals */
clk_register_fixed_factor(NULL, "thermal_clk", "osc_24m_clk", 0, 1,
128);
- clk = clk_register_gate(NULL, "thermal_gate_clk", "thermal_clk", 0,
+ clk = clk_register_gate(NULL, "thermal_gclk", "thermal_clk", 0,
SPEAR1310_PERIP2_CLK_ENB, SPEAR1310_THSENS_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "spear_thermal");
clk_register_clkdev(clk, "apb_clk", NULL);
/* gpt clocks */
- clk = clk_register_mux(NULL, "gpt0_mux_clk", gpt_parents,
+ clk = clk_register_mux(NULL, "gpt0_mclk", gpt_parents,
ARRAY_SIZE(gpt_parents), 0, SPEAR1310_PERIP_CLK_CFG,
SPEAR1310_GPT0_CLK_SHIFT, SPEAR1310_GPT_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "gpt0_mux_clk", NULL);
- clk = clk_register_gate(NULL, "gpt0_clk", "gpt0_mux_clk", 0,
+ clk_register_clkdev(clk, "gpt0_mclk", NULL);
+ clk = clk_register_gate(NULL, "gpt0_clk", "gpt0_mclk", 0,
SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_GPT0_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "gpt0");
- clk = clk_register_mux(NULL, "gpt1_mux_clk", gpt_parents,
+ clk = clk_register_mux(NULL, "gpt1_mclk", gpt_parents,
ARRAY_SIZE(gpt_parents), 0, SPEAR1310_PERIP_CLK_CFG,
SPEAR1310_GPT1_CLK_SHIFT, SPEAR1310_GPT_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "gpt1_mux_clk", NULL);
- clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mux_clk", 0,
+ clk_register_clkdev(clk, "gpt1_mclk", NULL);
+ clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mclk", 0,
SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_GPT1_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "gpt1");
- clk = clk_register_mux(NULL, "gpt2_mux_clk", gpt_parents,
+ clk = clk_register_mux(NULL, "gpt2_mclk", gpt_parents,
ARRAY_SIZE(gpt_parents), 0, SPEAR1310_PERIP_CLK_CFG,
SPEAR1310_GPT2_CLK_SHIFT, SPEAR1310_GPT_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "gpt2_mux_clk", NULL);
- clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mux_clk", 0,
+ clk_register_clkdev(clk, "gpt2_mclk", NULL);
+ clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mclk", 0,
SPEAR1310_PERIP2_CLK_ENB, SPEAR1310_GPT2_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "gpt2");
- clk = clk_register_mux(NULL, "gpt3_mux_clk", gpt_parents,
+ clk = clk_register_mux(NULL, "gpt3_mclk", gpt_parents,
ARRAY_SIZE(gpt_parents), 0, SPEAR1310_PERIP_CLK_CFG,
SPEAR1310_GPT3_CLK_SHIFT, SPEAR1310_GPT_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "gpt3_mux_clk", NULL);
- clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mux_clk", 0,
+ clk_register_clkdev(clk, "gpt3_mclk", NULL);
+ clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mclk", 0,
SPEAR1310_PERIP2_CLK_ENB, SPEAR1310_GPT3_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "gpt3");
/* others */
- clk = clk_register_aux("uart_synth_clk", "uart_synth_gate_clk",
- "vco1div2_clk", 0, SPEAR1310_UART_CLK_SYNT, NULL,
- aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "uart_synth_clk", NULL);
- clk_register_clkdev(clk1, "uart_synth_gate_clk", NULL);
+ clk = clk_register_aux("uart_syn_clk", "uart_syn_gclk", "vco1div2_clk",
+ 0, SPEAR1310_UART_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "uart_syn_clk", NULL);
+ clk_register_clkdev(clk1, "uart_syn_gclk", NULL);
- clk = clk_register_mux(NULL, "uart0_mux_clk", uart0_parents,
+ clk = clk_register_mux(NULL, "uart0_mclk", uart0_parents,
ARRAY_SIZE(uart0_parents), 0, SPEAR1310_PERIP_CLK_CFG,
SPEAR1310_UART_CLK_SHIFT, SPEAR1310_UART_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "uart0_mux_clk", NULL);
+ clk_register_clkdev(clk, "uart0_mclk", NULL);
- clk = clk_register_gate(NULL, "uart0_clk", "uart0_mux_clk", 0,
+ clk = clk_register_gate(NULL, "uart0_clk", "uart0_mclk", 0,
SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_UART_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "e0000000.serial");
- clk = clk_register_aux("sdhci_synth_clk", "sdhci_synth_gate_clk",
+ clk = clk_register_aux("sdhci_syn_clk", "sdhci_syn_gclk",
"vco1div2_clk", 0, SPEAR1310_SDHCI_CLK_SYNT, NULL,
aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "sdhci_synth_clk", NULL);
- clk_register_clkdev(clk1, "sdhci_synth_gate_clk", NULL);
+ clk_register_clkdev(clk, "sdhci_syn_clk", NULL);
+ clk_register_clkdev(clk1, "sdhci_syn_gclk", NULL);
- clk = clk_register_gate(NULL, "sdhci_clk", "sdhci_synth_gate_clk", 0,
+ clk = clk_register_gate(NULL, "sdhci_clk", "sdhci_syn_gclk", 0,
SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_SDHCI_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "b3000000.sdhci");
- clk = clk_register_aux("cfxd_synth_clk", "cfxd_synth_gate_clk",
- "vco1div2_clk", 0, SPEAR1310_CFXD_CLK_SYNT, NULL,
- aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "cfxd_synth_clk", NULL);
- clk_register_clkdev(clk1, "cfxd_synth_gate_clk", NULL);
+ clk = clk_register_aux("cfxd_syn_clk", "cfxd_syn_gclk", "vco1div2_clk",
+ 0, SPEAR1310_CFXD_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "cfxd_syn_clk", NULL);
+ clk_register_clkdev(clk1, "cfxd_syn_gclk", NULL);
- clk = clk_register_gate(NULL, "cfxd_clk", "cfxd_synth_gate_clk", 0,
+ clk = clk_register_gate(NULL, "cfxd_clk", "cfxd_syn_gclk", 0,
SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_CFXD_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "b2800000.cf");
clk_register_clkdev(clk, NULL, "arasan_xd");
- clk = clk_register_aux("c3_synth_clk", "c3_synth_gate_clk",
- "vco1div2_clk", 0, SPEAR1310_C3_CLK_SYNT, NULL,
- aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "c3_synth_clk", NULL);
- clk_register_clkdev(clk1, "c3_synth_gate_clk", NULL);
+ clk = clk_register_aux("c3_syn_clk", "c3_syn_gclk", "vco1div2_clk",
+ 0, SPEAR1310_C3_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "c3_syn_clk", NULL);
+ clk_register_clkdev(clk1, "c3_syn_gclk", NULL);
- clk = clk_register_mux(NULL, "c3_mux_clk", c3_parents,
+ clk = clk_register_mux(NULL, "c3_mclk", c3_parents,
ARRAY_SIZE(c3_parents), 0, SPEAR1310_PERIP_CLK_CFG,
SPEAR1310_C3_CLK_SHIFT, SPEAR1310_C3_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "c3_mux_clk", NULL);
+ clk_register_clkdev(clk, "c3_mclk", NULL);
- clk = clk_register_gate(NULL, "c3_clk", "c3_mux_clk", 0,
+ clk = clk_register_gate(NULL, "c3_clk", "c3_mclk", 0,
SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_C3_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "c3");
/* gmac */
- clk = clk_register_mux(NULL, "gmac_phy_input_mux_clk",
- gmac_phy_input_parents,
+ clk = clk_register_mux(NULL, "phy_input_mclk", gmac_phy_input_parents,
ARRAY_SIZE(gmac_phy_input_parents), 0,
SPEAR1310_GMAC_CLK_CFG,
SPEAR1310_GMAC_PHY_INPUT_CLK_SHIFT,
SPEAR1310_GMAC_PHY_INPUT_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "gmac_phy_input_mux_clk", NULL);
+ clk_register_clkdev(clk, "phy_input_mclk", NULL);
- clk = clk_register_aux("gmac_phy_synth_clk", "gmac_phy_synth_gate_clk",
- "gmac_phy_input_mux_clk", 0, SPEAR1310_GMAC_CLK_SYNT,
- NULL, gmac_rtbl, ARRAY_SIZE(gmac_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "gmac_phy_synth_clk", NULL);
- clk_register_clkdev(clk1, "gmac_phy_synth_gate_clk", NULL);
+ clk = clk_register_aux("phy_syn_clk", "phy_syn_gclk", "phy_input_mclk",
+ 0, SPEAR1310_GMAC_CLK_SYNT, NULL, gmac_rtbl,
+ ARRAY_SIZE(gmac_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "phy_syn_clk", NULL);
+ clk_register_clkdev(clk1, "phy_syn_gclk", NULL);
- clk = clk_register_mux(NULL, "gmac_phy_mux_clk", gmac_phy_parents,
+ clk = clk_register_mux(NULL, "phy_mclk", gmac_phy_parents,
ARRAY_SIZE(gmac_phy_parents), 0,
SPEAR1310_PERIP_CLK_CFG, SPEAR1310_GMAC_PHY_CLK_SHIFT,
SPEAR1310_GMAC_PHY_CLK_MASK, 0, &_lock);
clk_register_clkdev(clk, NULL, "stmmacphy.0");
/* clcd */
- clk = clk_register_mux(NULL, "clcd_synth_mux_clk", clcd_synth_parents,
+ clk = clk_register_mux(NULL, "clcd_syn_mclk", clcd_synth_parents,
ARRAY_SIZE(clcd_synth_parents), 0,
SPEAR1310_CLCD_CLK_SYNT, SPEAR1310_CLCD_SYNT_CLK_SHIFT,
SPEAR1310_CLCD_SYNT_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "clcd_synth_mux_clk", NULL);
+ clk_register_clkdev(clk, "clcd_syn_mclk", NULL);
- clk = clk_register_frac("clcd_synth_clk", "clcd_synth_mux_clk", 0,
+ clk = clk_register_frac("clcd_syn_clk", "clcd_syn_mclk", 0,
SPEAR1310_CLCD_CLK_SYNT, clcd_rtbl,
ARRAY_SIZE(clcd_rtbl), &_lock);
- clk_register_clkdev(clk, "clcd_synth_clk", NULL);
+ clk_register_clkdev(clk, "clcd_syn_clk", NULL);
- clk = clk_register_mux(NULL, "clcd_pixel_mux_clk", clcd_pixel_parents,
+ clk = clk_register_mux(NULL, "clcd_pixel_mclk", clcd_pixel_parents,
ARRAY_SIZE(clcd_pixel_parents), 0,
SPEAR1310_PERIP_CLK_CFG, SPEAR1310_CLCD_CLK_SHIFT,
SPEAR1310_CLCD_CLK_MASK, 0, &_lock);
clk_register_clkdev(clk, "clcd_pixel_clk", NULL);
- clk = clk_register_gate(NULL, "clcd_clk", "clcd_pixel_mux_clk", 0,
+ clk = clk_register_gate(NULL, "clcd_clk", "clcd_pixel_mclk", 0,
SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_CLCD_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, "clcd_clk", NULL);
/* i2s */
- clk = clk_register_mux(NULL, "i2s_src_mux_clk", i2s_src_parents,
+ clk = clk_register_mux(NULL, "i2s_src_mclk", i2s_src_parents,
ARRAY_SIZE(i2s_src_parents), 0, SPEAR1310_I2S_CLK_CFG,
SPEAR1310_I2S_SRC_CLK_SHIFT, SPEAR1310_I2S_SRC_CLK_MASK,
0, &_lock);
clk_register_clkdev(clk, "i2s_src_clk", NULL);
- clk = clk_register_aux("i2s_prs1_clk", NULL, "i2s_src_mux_clk", 0,
+ clk = clk_register_aux("i2s_prs1_clk", NULL, "i2s_src_mclk", 0,
SPEAR1310_I2S_CLK_CFG, &i2s_prs1_masks, i2s_prs1_rtbl,
ARRAY_SIZE(i2s_prs1_rtbl), &_lock, NULL);
clk_register_clkdev(clk, "i2s_prs1_clk", NULL);
- clk = clk_register_mux(NULL, "i2s_ref_mux_clk", i2s_ref_parents,
+ clk = clk_register_mux(NULL, "i2s_ref_mclk", i2s_ref_parents,
ARRAY_SIZE(i2s_ref_parents), 0, SPEAR1310_I2S_CLK_CFG,
SPEAR1310_I2S_REF_SHIFT, SPEAR1310_I2S_REF_SEL_MASK, 0,
&_lock);
clk_register_clkdev(clk, "i2s_ref_clk", NULL);
- clk = clk_register_gate(NULL, "i2s_ref_pad_clk", "i2s_ref_mux_clk", 0,
+ clk = clk_register_gate(NULL, "i2s_ref_pad_clk", "i2s_ref_mclk", 0,
SPEAR1310_PERIP2_CLK_ENB, SPEAR1310_I2S_REF_PAD_CLK_ENB,
0, &_lock);
clk_register_clkdev(clk, "i2s_ref_pad_clk", NULL);
- clk = clk_register_aux("i2s_sclk_clk", "i2s_sclk_gate_clk",
+ clk = clk_register_aux("i2s_sclk_clk", "i2s_sclk_gclk",
"i2s_ref_pad_clk", 0, SPEAR1310_I2S_CLK_CFG,
&i2s_sclk_masks, i2s_sclk_rtbl,
ARRAY_SIZE(i2s_sclk_rtbl), &_lock, &clk1);
clk_register_clkdev(clk, "i2s_sclk_clk", NULL);
- clk_register_clkdev(clk1, "i2s_sclk_gate_clk", NULL);
+ clk_register_clkdev(clk1, "i2s_sclk_gclk", NULL);
/* clock derived from ahb clk */
clk = clk_register_gate(NULL, "i2c0_clk", "ahb_clk", 0,
&_lock);
clk_register_clkdev(clk, "sysram1_clk", NULL);
- clk = clk_register_aux("adc_synth_clk", "adc_synth_gate_clk", "ahb_clk",
+ clk = clk_register_aux("adc_syn_clk", "adc_syn_gclk", "ahb_clk",
0, SPEAR1310_ADC_CLK_SYNT, NULL, adc_rtbl,
ARRAY_SIZE(adc_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "adc_synth_clk", NULL);
- clk_register_clkdev(clk1, "adc_synth_gate_clk", NULL);
+ clk_register_clkdev(clk, "adc_syn_clk", NULL);
+ clk_register_clkdev(clk1, "adc_syn_gclk", NULL);
- clk = clk_register_gate(NULL, "adc_clk", "adc_synth_gate_clk", 0,
+ clk = clk_register_gate(NULL, "adc_clk", "adc_syn_gclk", 0,
SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_ADC_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "adc_clk");
clk_register_clkdev(clk, NULL, "e0300000.kbd");
/* RAS clks */
- clk = clk_register_mux(NULL, "gen_synth0_1_mux_clk",
- gen_synth0_1_parents, ARRAY_SIZE(gen_synth0_1_parents),
- 0, SPEAR1310_PLL_CFG, SPEAR1310_RAS_SYNT0_1_CLK_SHIFT,
+ clk = clk_register_mux(NULL, "gen_syn0_1_mclk", gen_synth0_1_parents,
+ ARRAY_SIZE(gen_synth0_1_parents), 0, SPEAR1310_PLL_CFG,
+ SPEAR1310_RAS_SYNT0_1_CLK_SHIFT,
SPEAR1310_RAS_SYNT_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "gen_synth0_1_clk", NULL);
+ clk_register_clkdev(clk, "gen_syn0_1_clk", NULL);
- clk = clk_register_mux(NULL, "gen_synth2_3_mux_clk",
- gen_synth2_3_parents, ARRAY_SIZE(gen_synth2_3_parents),
- 0, SPEAR1310_PLL_CFG, SPEAR1310_RAS_SYNT2_3_CLK_SHIFT,
+ clk = clk_register_mux(NULL, "gen_syn2_3_mclk", gen_synth2_3_parents,
+ ARRAY_SIZE(gen_synth2_3_parents), 0, SPEAR1310_PLL_CFG,
+ SPEAR1310_RAS_SYNT2_3_CLK_SHIFT,
SPEAR1310_RAS_SYNT_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "gen_synth2_3_clk", NULL);
+ clk_register_clkdev(clk, "gen_syn2_3_clk", NULL);
- clk = clk_register_frac("gen_synth0_clk", "gen_synth0_1_clk", 0,
+ clk = clk_register_frac("gen_syn0_clk", "gen_syn0_1_clk", 0,
SPEAR1310_RAS_CLK_SYNT0, gen_rtbl, ARRAY_SIZE(gen_rtbl),
&_lock);
- clk_register_clkdev(clk, "gen_synth0_clk", NULL);
+ clk_register_clkdev(clk, "gen_syn0_clk", NULL);
- clk = clk_register_frac("gen_synth1_clk", "gen_synth0_1_clk", 0,
+ clk = clk_register_frac("gen_syn1_clk", "gen_syn0_1_clk", 0,
SPEAR1310_RAS_CLK_SYNT1, gen_rtbl, ARRAY_SIZE(gen_rtbl),
&_lock);
- clk_register_clkdev(clk, "gen_synth1_clk", NULL);
+ clk_register_clkdev(clk, "gen_syn1_clk", NULL);
- clk = clk_register_frac("gen_synth2_clk", "gen_synth2_3_clk", 0,
+ clk = clk_register_frac("gen_syn2_clk", "gen_syn2_3_clk", 0,
SPEAR1310_RAS_CLK_SYNT2, gen_rtbl, ARRAY_SIZE(gen_rtbl),
&_lock);
- clk_register_clkdev(clk, "gen_synth2_clk", NULL);
+ clk_register_clkdev(clk, "gen_syn2_clk", NULL);
- clk = clk_register_frac("gen_synth3_clk", "gen_synth2_3_clk", 0,
+ clk = clk_register_frac("gen_syn3_clk", "gen_syn2_3_clk", 0,
SPEAR1310_RAS_CLK_SYNT3, gen_rtbl, ARRAY_SIZE(gen_rtbl),
&_lock);
- clk_register_clkdev(clk, "gen_synth3_clk", NULL);
+ clk_register_clkdev(clk, "gen_syn3_clk", NULL);
clk = clk_register_gate(NULL, "ras_osc_24m_clk", "osc_24m_clk", 0,
SPEAR1310_RAS_CLK_ENB, SPEAR1310_OSC_24M_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, "ras_pll3_clk", NULL);
- clk = clk_register_gate(NULL, "ras_tx125_clk", "gmii_125m_pad_clk", 0,
+ clk = clk_register_gate(NULL, "ras_tx125_clk", "gmii_pad_clk", 0,
SPEAR1310_RAS_CLK_ENB, SPEAR1310_C125M_PAD_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, "ras_tx125_clk", NULL);
&_lock);
clk_register_clkdev(clk, NULL, "5c700000.eth");
- clk = clk_register_mux(NULL, "smii_rgmii_phy_mux_clk",
+ clk = clk_register_mux(NULL, "smii_rgmii_phy_mclk",
smii_rgmii_phy_parents,
ARRAY_SIZE(smii_rgmii_phy_parents), 0,
SPEAR1310_RAS_CTRL_REG1,
clk_register_clkdev(clk, NULL, "stmmacphy.2");
clk_register_clkdev(clk, NULL, "stmmacphy.4");
- clk = clk_register_mux(NULL, "rmii_phy_mux_clk", rmii_phy_parents,
+ clk = clk_register_mux(NULL, "rmii_phy_mclk", rmii_phy_parents,
ARRAY_SIZE(rmii_phy_parents), 0,
SPEAR1310_RAS_CTRL_REG1, SPEAR1310_RMII_PHY_CLK_SHIFT,
SPEAR1310_PHY_CLK_MASK, 0, &_lock);
clk_register_clkdev(clk, NULL, "stmmacphy.3");
- clk = clk_register_mux(NULL, "uart1_mux_clk", uart_parents,
+ clk = clk_register_mux(NULL, "uart1_mclk", uart_parents,
ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_UART1_CLK_SHIFT, SPEAR1310_RAS_UART_CLK_MASK,
0, &_lock);
- clk_register_clkdev(clk, "uart1_mux_clk", NULL);
+ clk_register_clkdev(clk, "uart1_mclk", NULL);
- clk = clk_register_gate(NULL, "uart1_clk", "uart1_mux_clk", 0,
+ clk = clk_register_gate(NULL, "uart1_clk", "uart1_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_UART1_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "5c800000.serial");
- clk = clk_register_mux(NULL, "uart2_mux_clk", uart_parents,
+ clk = clk_register_mux(NULL, "uart2_mclk", uart_parents,
ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_UART2_CLK_SHIFT, SPEAR1310_RAS_UART_CLK_MASK,
0, &_lock);
- clk_register_clkdev(clk, "uart2_mux_clk", NULL);
+ clk_register_clkdev(clk, "uart2_mclk", NULL);
- clk = clk_register_gate(NULL, "uart2_clk", "uart2_mux_clk", 0,
+ clk = clk_register_gate(NULL, "uart2_clk", "uart2_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_UART2_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "5c900000.serial");
- clk = clk_register_mux(NULL, "uart3_mux_clk", uart_parents,
+ clk = clk_register_mux(NULL, "uart3_mclk", uart_parents,
ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_UART3_CLK_SHIFT, SPEAR1310_RAS_UART_CLK_MASK,
0, &_lock);
- clk_register_clkdev(clk, "uart3_mux_clk", NULL);
+ clk_register_clkdev(clk, "uart3_mclk", NULL);
- clk = clk_register_gate(NULL, "uart3_clk", "uart3_mux_clk", 0,
+ clk = clk_register_gate(NULL, "uart3_clk", "uart3_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_UART3_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "5ca00000.serial");
- clk = clk_register_mux(NULL, "uart4_mux_clk", uart_parents,
+ clk = clk_register_mux(NULL, "uart4_mclk", uart_parents,
ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_UART4_CLK_SHIFT, SPEAR1310_RAS_UART_CLK_MASK,
0, &_lock);
- clk_register_clkdev(clk, "uart4_mux_clk", NULL);
+ clk_register_clkdev(clk, "uart4_mclk", NULL);
- clk = clk_register_gate(NULL, "uart4_clk", "uart4_mux_clk", 0,
+ clk = clk_register_gate(NULL, "uart4_clk", "uart4_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_UART4_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "5cb00000.serial");
- clk = clk_register_mux(NULL, "uart5_mux_clk", uart_parents,
+ clk = clk_register_mux(NULL, "uart5_mclk", uart_parents,
ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_UART5_CLK_SHIFT, SPEAR1310_RAS_UART_CLK_MASK,
0, &_lock);
- clk_register_clkdev(clk, "uart5_mux_clk", NULL);
+ clk_register_clkdev(clk, "uart5_mclk", NULL);
- clk = clk_register_gate(NULL, "uart5_clk", "uart5_mux_clk", 0,
+ clk = clk_register_gate(NULL, "uart5_clk", "uart5_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_UART5_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "5cc00000.serial");
- clk = clk_register_mux(NULL, "i2c1_mux_clk", i2c_parents,
+ clk = clk_register_mux(NULL, "i2c1_mclk", i2c_parents,
ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_I2C1_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "i2c1_mux_clk", NULL);
+ clk_register_clkdev(clk, "i2c1_mclk", NULL);
- clk = clk_register_gate(NULL, "i2c1_clk", "i2c1_mux_clk", 0,
+ clk = clk_register_gate(NULL, "i2c1_clk", "i2c1_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C1_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "5cd00000.i2c");
- clk = clk_register_mux(NULL, "i2c2_mux_clk", i2c_parents,
+ clk = clk_register_mux(NULL, "i2c2_mclk", i2c_parents,
ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_I2C2_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "i2c2_mux_clk", NULL);
+ clk_register_clkdev(clk, "i2c2_mclk", NULL);
- clk = clk_register_gate(NULL, "i2c2_clk", "i2c2_mux_clk", 0,
+ clk = clk_register_gate(NULL, "i2c2_clk", "i2c2_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C2_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "5ce00000.i2c");
- clk = clk_register_mux(NULL, "i2c3_mux_clk", i2c_parents,
+ clk = clk_register_mux(NULL, "i2c3_mclk", i2c_parents,
ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_I2C3_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "i2c3_mux_clk", NULL);
+ clk_register_clkdev(clk, "i2c3_mclk", NULL);
- clk = clk_register_gate(NULL, "i2c3_clk", "i2c3_mux_clk", 0,
+ clk = clk_register_gate(NULL, "i2c3_clk", "i2c3_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C3_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "5cf00000.i2c");
- clk = clk_register_mux(NULL, "i2c4_mux_clk", i2c_parents,
+ clk = clk_register_mux(NULL, "i2c4_mclk", i2c_parents,
ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_I2C4_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "i2c4_mux_clk", NULL);
+ clk_register_clkdev(clk, "i2c4_mclk", NULL);
- clk = clk_register_gate(NULL, "i2c4_clk", "i2c4_mux_clk", 0,
+ clk = clk_register_gate(NULL, "i2c4_clk", "i2c4_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C4_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "5d000000.i2c");
- clk = clk_register_mux(NULL, "i2c5_mux_clk", i2c_parents,
+ clk = clk_register_mux(NULL, "i2c5_mclk", i2c_parents,
ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_I2C5_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "i2c5_mux_clk", NULL);
+ clk_register_clkdev(clk, "i2c5_mclk", NULL);
- clk = clk_register_gate(NULL, "i2c5_clk", "i2c5_mux_clk", 0,
+ clk = clk_register_gate(NULL, "i2c5_clk", "i2c5_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C5_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "5d100000.i2c");
- clk = clk_register_mux(NULL, "i2c6_mux_clk", i2c_parents,
+ clk = clk_register_mux(NULL, "i2c6_mclk", i2c_parents,
ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_I2C6_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "i2c6_mux_clk", NULL);
+ clk_register_clkdev(clk, "i2c6_mclk", NULL);
- clk = clk_register_gate(NULL, "i2c6_clk", "i2c6_mux_clk", 0,
+ clk = clk_register_gate(NULL, "i2c6_clk", "i2c6_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C6_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "5d200000.i2c");
- clk = clk_register_mux(NULL, "i2c7_mux_clk", i2c_parents,
+ clk = clk_register_mux(NULL, "i2c7_mclk", i2c_parents,
ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_I2C7_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "i2c7_mux_clk", NULL);
+ clk_register_clkdev(clk, "i2c7_mclk", NULL);
- clk = clk_register_gate(NULL, "i2c7_clk", "i2c7_mux_clk", 0,
+ clk = clk_register_gate(NULL, "i2c7_clk", "i2c7_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C7_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "5d300000.i2c");
- clk = clk_register_mux(NULL, "ssp1_mux_clk", ssp1_parents,
+ clk = clk_register_mux(NULL, "ssp1_mclk", ssp1_parents,
ARRAY_SIZE(ssp1_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_SSP1_CLK_SHIFT, SPEAR1310_SSP1_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "ssp1_mux_clk", NULL);
+ clk_register_clkdev(clk, "ssp1_mclk", NULL);
- clk = clk_register_gate(NULL, "ssp1_clk", "ssp1_mux_clk", 0,
+ clk = clk_register_gate(NULL, "ssp1_clk", "ssp1_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_SSP1_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "5d400000.spi");
- clk = clk_register_mux(NULL, "pci_mux_clk", pci_parents,
+ clk = clk_register_mux(NULL, "pci_mclk", pci_parents,
ARRAY_SIZE(pci_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_PCI_CLK_SHIFT, SPEAR1310_PCI_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "pci_mux_clk", NULL);
+ clk_register_clkdev(clk, "pci_mclk", NULL);
- clk = clk_register_gate(NULL, "pci_clk", "pci_mux_clk", 0,
+ clk = clk_register_gate(NULL, "pci_clk", "pci_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_PCI_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "pci");
- clk = clk_register_mux(NULL, "tdm1_mux_clk", tdm_parents,
+ clk = clk_register_mux(NULL, "tdm1_mclk", tdm_parents,
ARRAY_SIZE(tdm_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_TDM1_CLK_SHIFT, SPEAR1310_TDM_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "tdm1_mux_clk", NULL);
+ clk_register_clkdev(clk, "tdm1_mclk", NULL);
- clk = clk_register_gate(NULL, "tdm1_clk", "tdm1_mux_clk", 0,
+ clk = clk_register_gate(NULL, "tdm1_clk", "tdm1_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_TDM1_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "tdm_hdlc.0");
- clk = clk_register_mux(NULL, "tdm2_mux_clk", tdm_parents,
+ clk = clk_register_mux(NULL, "tdm2_mclk", tdm_parents,
ARRAY_SIZE(tdm_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_TDM2_CLK_SHIFT, SPEAR1310_TDM_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "tdm2_mux_clk", NULL);
+ clk_register_clkdev(clk, "tdm2_mclk", NULL);
- clk = clk_register_gate(NULL, "tdm2_clk", "tdm2_mux_clk", 0,
+ clk = clk_register_gate(NULL, "tdm2_clk", "tdm2_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_TDM2_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "tdm_hdlc.1");
* SPEAr1340 machine clock framework source file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
/* clock parents */
static const char *vco_parents[] = { "osc_24m_clk", "osc_25m_clk", };
-static const char *sys_parents[] = { "none", "pll1_clk", "none", "none",
- "sys_synth_clk", "none", "pll2_clk", "pll3_clk", };
-static const char *ahb_parents[] = { "cpu_div3_clk", "amba_synth_clk", };
+static const char *sys_parents[] = { "pll1_clk", "pll1_clk", "pll1_clk",
+ "pll1_clk", "sys_synth_clk", "sys_synth_clk", "pll2_clk", "pll3_clk", };
+static const char *ahb_parents[] = { "cpu_div3_clk", "amba_syn_clk", };
static const char *gpt_parents[] = { "osc_24m_clk", "apb_clk", };
static const char *uart0_parents[] = { "pll5_clk", "osc_24m_clk",
- "uart0_synth_gate_clk", };
+ "uart0_syn_gclk", };
static const char *uart1_parents[] = { "pll5_clk", "osc_24m_clk",
- "uart1_synth_gate_clk", };
-static const char *c3_parents[] = { "pll5_clk", "c3_synth_gate_clk", };
-static const char *gmac_phy_input_parents[] = { "gmii_125m_pad_clk", "pll2_clk",
+ "uart1_syn_gclk", };
+static const char *c3_parents[] = { "pll5_clk", "c3_syn_gclk", };
+static const char *gmac_phy_input_parents[] = { "gmii_pad_clk", "pll2_clk",
"osc_25m_clk", };
-static const char *gmac_phy_parents[] = { "gmac_phy_input_mux_clk",
- "gmac_phy_synth_gate_clk", };
+static const char *gmac_phy_parents[] = { "phy_input_mclk", "phy_syn_gclk", };
static const char *clcd_synth_parents[] = { "vco1div4_clk", "pll2_clk", };
-static const char *clcd_pixel_parents[] = { "pll5_clk", "clcd_synth_clk", };
+static const char *clcd_pixel_parents[] = { "pll5_clk", "clcd_syn_clk", };
static const char *i2s_src_parents[] = { "vco1div2_clk", "pll2_clk", "pll3_clk",
"i2s_src_pad_clk", };
-static const char *i2s_ref_parents[] = { "i2s_src_mux_clk", "i2s_prs1_clk", };
-static const char *spdif_out_parents[] = { "i2s_src_pad_clk", "gen_synth2_clk",
-};
-static const char *spdif_in_parents[] = { "pll2_clk", "gen_synth3_clk", };
+static const char *i2s_ref_parents[] = { "i2s_src_mclk", "i2s_prs1_clk", };
+static const char *spdif_out_parents[] = { "i2s_src_pad_clk", "gen_syn2_clk", };
+static const char *spdif_in_parents[] = { "pll2_clk", "gen_syn3_clk", };
static const char *gen_synth0_1_parents[] = { "vco1div4_clk", "vco3div2_clk",
"pll3_clk", };
25000000);
clk_register_clkdev(clk, "osc_25m_clk", NULL);
- clk = clk_register_fixed_rate(NULL, "gmii_125m_pad_clk", NULL,
- CLK_IS_ROOT, 125000000);
- clk_register_clkdev(clk, "gmii_125m_pad_clk", NULL);
+ clk = clk_register_fixed_rate(NULL, "gmii_pad_clk", NULL, CLK_IS_ROOT,
+ 125000000);
+ clk_register_clkdev(clk, "gmii_pad_clk", NULL);
clk = clk_register_fixed_rate(NULL, "i2s_src_pad_clk", NULL,
CLK_IS_ROOT, 12288000);
/* clock derived from 24 or 25 MHz osc clk */
/* vco-pll */
- clk = clk_register_mux(NULL, "vco1_mux_clk", vco_parents,
+ clk = clk_register_mux(NULL, "vco1_mclk", vco_parents,
ARRAY_SIZE(vco_parents), 0, SPEAR1340_PLL_CFG,
SPEAR1340_PLL1_CLK_SHIFT, SPEAR1340_PLL_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "vco1_mux_clk", NULL);
- clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL, "vco1_mux_clk",
- 0, SPEAR1340_PLL1_CTR, SPEAR1340_PLL1_FRQ, pll_rtbl,
+ clk_register_clkdev(clk, "vco1_mclk", NULL);
+ clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL, "vco1_mclk", 0,
+ SPEAR1340_PLL1_CTR, SPEAR1340_PLL1_FRQ, pll_rtbl,
ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
clk_register_clkdev(clk, "vco1_clk", NULL);
clk_register_clkdev(clk1, "pll1_clk", NULL);
- clk = clk_register_mux(NULL, "vco2_mux_clk", vco_parents,
+ clk = clk_register_mux(NULL, "vco2_mclk", vco_parents,
ARRAY_SIZE(vco_parents), 0, SPEAR1340_PLL_CFG,
SPEAR1340_PLL2_CLK_SHIFT, SPEAR1340_PLL_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "vco2_mux_clk", NULL);
- clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL, "vco2_mux_clk",
- 0, SPEAR1340_PLL2_CTR, SPEAR1340_PLL2_FRQ, pll_rtbl,
+ clk_register_clkdev(clk, "vco2_mclk", NULL);
+ clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL, "vco2_mclk", 0,
+ SPEAR1340_PLL2_CTR, SPEAR1340_PLL2_FRQ, pll_rtbl,
ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
clk_register_clkdev(clk, "vco2_clk", NULL);
clk_register_clkdev(clk1, "pll2_clk", NULL);
- clk = clk_register_mux(NULL, "vco3_mux_clk", vco_parents,
+ clk = clk_register_mux(NULL, "vco3_mclk", vco_parents,
ARRAY_SIZE(vco_parents), 0, SPEAR1340_PLL_CFG,
SPEAR1340_PLL3_CLK_SHIFT, SPEAR1340_PLL_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "vco3_mux_clk", NULL);
- clk = clk_register_vco_pll("vco3_clk", "pll3_clk", NULL, "vco3_mux_clk",
- 0, SPEAR1340_PLL3_CTR, SPEAR1340_PLL3_FRQ, pll_rtbl,
+ clk_register_clkdev(clk, "vco3_mclk", NULL);
+ clk = clk_register_vco_pll("vco3_clk", "pll3_clk", NULL, "vco3_mclk", 0,
+ SPEAR1340_PLL3_CTR, SPEAR1340_PLL3_FRQ, pll_rtbl,
ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
clk_register_clkdev(clk, "vco3_clk", NULL);
clk_register_clkdev(clk1, "pll3_clk", NULL);
/* peripherals */
clk_register_fixed_factor(NULL, "thermal_clk", "osc_24m_clk", 0, 1,
128);
- clk = clk_register_gate(NULL, "thermal_gate_clk", "thermal_clk", 0,
+ clk = clk_register_gate(NULL, "thermal_gclk", "thermal_clk", 0,
SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_THSENS_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "spear_thermal");
clk_register_clkdev(clk, "ddr_clk", NULL);
/* clock derived from pll1 clk */
- clk = clk_register_frac("sys_synth_clk", "vco1div2_clk", 0,
+ clk = clk_register_frac("sys_syn_clk", "vco1div2_clk", 0,
SPEAR1340_SYS_CLK_SYNT, sys_synth_rtbl,
ARRAY_SIZE(sys_synth_rtbl), &_lock);
- clk_register_clkdev(clk, "sys_synth_clk", NULL);
+ clk_register_clkdev(clk, "sys_syn_clk", NULL);
- clk = clk_register_frac("amba_synth_clk", "vco1div2_clk", 0,
+ clk = clk_register_frac("amba_syn_clk", "vco1div2_clk", 0,
SPEAR1340_AMBA_CLK_SYNT, amba_synth_rtbl,
ARRAY_SIZE(amba_synth_rtbl), &_lock);
- clk_register_clkdev(clk, "amba_synth_clk", NULL);
+ clk_register_clkdev(clk, "amba_syn_clk", NULL);
- clk = clk_register_mux(NULL, "sys_mux_clk", sys_parents,
+ clk = clk_register_mux(NULL, "sys_mclk", sys_parents,
ARRAY_SIZE(sys_parents), 0, SPEAR1340_SYS_CLK_CTRL,
SPEAR1340_SCLK_SRC_SEL_SHIFT,
SPEAR1340_SCLK_SRC_SEL_MASK, 0, &_lock);
clk_register_clkdev(clk, "sys_clk", NULL);
- clk = clk_register_fixed_factor(NULL, "cpu_clk", "sys_mux_clk", 0, 1,
+ clk = clk_register_fixed_factor(NULL, "cpu_clk", "sys_mclk", 0, 1,
2);
clk_register_clkdev(clk, "cpu_clk", NULL);
clk_register_clkdev(clk, "apb_clk", NULL);
/* gpt clocks */
- clk = clk_register_mux(NULL, "gpt0_mux_clk", gpt_parents,
+ clk = clk_register_mux(NULL, "gpt0_mclk", gpt_parents,
ARRAY_SIZE(gpt_parents), 0, SPEAR1340_PERIP_CLK_CFG,
SPEAR1340_GPT0_CLK_SHIFT, SPEAR1340_GPT_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "gpt0_mux_clk", NULL);
- clk = clk_register_gate(NULL, "gpt0_clk", "gpt0_mux_clk", 0,
+ clk_register_clkdev(clk, "gpt0_mclk", NULL);
+ clk = clk_register_gate(NULL, "gpt0_clk", "gpt0_mclk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_GPT0_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "gpt0");
- clk = clk_register_mux(NULL, "gpt1_mux_clk", gpt_parents,
+ clk = clk_register_mux(NULL, "gpt1_mclk", gpt_parents,
ARRAY_SIZE(gpt_parents), 0, SPEAR1340_PERIP_CLK_CFG,
SPEAR1340_GPT1_CLK_SHIFT, SPEAR1340_GPT_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "gpt1_mux_clk", NULL);
- clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mux_clk", 0,
+ clk_register_clkdev(clk, "gpt1_mclk", NULL);
+ clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mclk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_GPT1_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "gpt1");
- clk = clk_register_mux(NULL, "gpt2_mux_clk", gpt_parents,
+ clk = clk_register_mux(NULL, "gpt2_mclk", gpt_parents,
ARRAY_SIZE(gpt_parents), 0, SPEAR1340_PERIP_CLK_CFG,
SPEAR1340_GPT2_CLK_SHIFT, SPEAR1340_GPT_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "gpt2_mux_clk", NULL);
- clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mux_clk", 0,
+ clk_register_clkdev(clk, "gpt2_mclk", NULL);
+ clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mclk", 0,
SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_GPT2_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "gpt2");
- clk = clk_register_mux(NULL, "gpt3_mux_clk", gpt_parents,
+ clk = clk_register_mux(NULL, "gpt3_mclk", gpt_parents,
ARRAY_SIZE(gpt_parents), 0, SPEAR1340_PERIP_CLK_CFG,
SPEAR1340_GPT3_CLK_SHIFT, SPEAR1340_GPT_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "gpt3_mux_clk", NULL);
- clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mux_clk", 0,
+ clk_register_clkdev(clk, "gpt3_mclk", NULL);
+ clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mclk", 0,
SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_GPT3_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "gpt3");
/* others */
- clk = clk_register_aux("uart0_synth_clk", "uart0_synth_gate_clk",
+ clk = clk_register_aux("uart0_syn_clk", "uart0_syn_gclk",
"vco1div2_clk", 0, SPEAR1340_UART0_CLK_SYNT, NULL,
aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "uart0_synth_clk", NULL);
- clk_register_clkdev(clk1, "uart0_synth_gate_clk", NULL);
+ clk_register_clkdev(clk, "uart0_syn_clk", NULL);
+ clk_register_clkdev(clk1, "uart0_syn_gclk", NULL);
- clk = clk_register_mux(NULL, "uart0_mux_clk", uart0_parents,
+ clk = clk_register_mux(NULL, "uart0_mclk", uart0_parents,
ARRAY_SIZE(uart0_parents), 0, SPEAR1340_PERIP_CLK_CFG,
SPEAR1340_UART0_CLK_SHIFT, SPEAR1340_UART_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "uart0_mux_clk", NULL);
+ clk_register_clkdev(clk, "uart0_mclk", NULL);
- clk = clk_register_gate(NULL, "uart0_clk", "uart0_mux_clk", 0,
+ clk = clk_register_gate(NULL, "uart0_clk", "uart0_mclk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UART0_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "e0000000.serial");
- clk = clk_register_aux("uart1_synth_clk", "uart1_synth_gate_clk",
+ clk = clk_register_aux("uart1_syn_clk", "uart1_syn_gclk",
"vco1div2_clk", 0, SPEAR1340_UART1_CLK_SYNT, NULL,
aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "uart1_synth_clk", NULL);
- clk_register_clkdev(clk1, "uart1_synth_gate_clk", NULL);
+ clk_register_clkdev(clk, "uart1_syn_clk", NULL);
+ clk_register_clkdev(clk1, "uart1_syn_gclk", NULL);
- clk = clk_register_mux(NULL, "uart1_mux_clk", uart1_parents,
+ clk = clk_register_mux(NULL, "uart1_mclk", uart1_parents,
ARRAY_SIZE(uart1_parents), 0, SPEAR1340_PERIP_CLK_CFG,
SPEAR1340_UART1_CLK_SHIFT, SPEAR1340_UART_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "uart1_mux_clk", NULL);
+ clk_register_clkdev(clk, "uart1_mclk", NULL);
- clk = clk_register_gate(NULL, "uart1_clk", "uart1_mux_clk", 0,
- SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UART1_CLK_ENB, 0,
+ clk = clk_register_gate(NULL, "uart1_clk", "uart1_mclk", 0,
+ SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_UART1_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "b4100000.serial");
- clk = clk_register_aux("sdhci_synth_clk", "sdhci_synth_gate_clk",
+ clk = clk_register_aux("sdhci_syn_clk", "sdhci_syn_gclk",
"vco1div2_clk", 0, SPEAR1340_SDHCI_CLK_SYNT, NULL,
aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "sdhci_synth_clk", NULL);
- clk_register_clkdev(clk1, "sdhci_synth_gate_clk", NULL);
+ clk_register_clkdev(clk, "sdhci_syn_clk", NULL);
+ clk_register_clkdev(clk1, "sdhci_syn_gclk", NULL);
- clk = clk_register_gate(NULL, "sdhci_clk", "sdhci_synth_gate_clk", 0,
+ clk = clk_register_gate(NULL, "sdhci_clk", "sdhci_syn_gclk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_SDHCI_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "b3000000.sdhci");
- clk = clk_register_aux("cfxd_synth_clk", "cfxd_synth_gate_clk",
- "vco1div2_clk", 0, SPEAR1340_CFXD_CLK_SYNT, NULL,
- aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "cfxd_synth_clk", NULL);
- clk_register_clkdev(clk1, "cfxd_synth_gate_clk", NULL);
+ clk = clk_register_aux("cfxd_syn_clk", "cfxd_syn_gclk", "vco1div2_clk",
+ 0, SPEAR1340_CFXD_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "cfxd_syn_clk", NULL);
+ clk_register_clkdev(clk1, "cfxd_syn_gclk", NULL);
- clk = clk_register_gate(NULL, "cfxd_clk", "cfxd_synth_gate_clk", 0,
+ clk = clk_register_gate(NULL, "cfxd_clk", "cfxd_syn_gclk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_CFXD_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "b2800000.cf");
clk_register_clkdev(clk, NULL, "arasan_xd");
- clk = clk_register_aux("c3_synth_clk", "c3_synth_gate_clk",
- "vco1div2_clk", 0, SPEAR1340_C3_CLK_SYNT, NULL,
- aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "c3_synth_clk", NULL);
- clk_register_clkdev(clk1, "c3_synth_gate_clk", NULL);
+ clk = clk_register_aux("c3_syn_clk", "c3_syn_gclk", "vco1div2_clk", 0,
+ SPEAR1340_C3_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "c3_syn_clk", NULL);
+ clk_register_clkdev(clk1, "c3_syn_gclk", NULL);
- clk = clk_register_mux(NULL, "c3_mux_clk", c3_parents,
+ clk = clk_register_mux(NULL, "c3_mclk", c3_parents,
ARRAY_SIZE(c3_parents), 0, SPEAR1340_PERIP_CLK_CFG,
SPEAR1340_C3_CLK_SHIFT, SPEAR1340_C3_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "c3_mux_clk", NULL);
+ clk_register_clkdev(clk, "c3_mclk", NULL);
- clk = clk_register_gate(NULL, "c3_clk", "c3_mux_clk", 0,
+ clk = clk_register_gate(NULL, "c3_clk", "c3_mclk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_C3_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "c3");
/* gmac */
- clk = clk_register_mux(NULL, "gmac_phy_input_mux_clk",
- gmac_phy_input_parents,
+ clk = clk_register_mux(NULL, "phy_input_mclk", gmac_phy_input_parents,
ARRAY_SIZE(gmac_phy_input_parents), 0,
SPEAR1340_GMAC_CLK_CFG,
SPEAR1340_GMAC_PHY_INPUT_CLK_SHIFT,
SPEAR1340_GMAC_PHY_INPUT_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "gmac_phy_input_mux_clk", NULL);
+ clk_register_clkdev(clk, "phy_input_mclk", NULL);
- clk = clk_register_aux("gmac_phy_synth_clk", "gmac_phy_synth_gate_clk",
- "gmac_phy_input_mux_clk", 0, SPEAR1340_GMAC_CLK_SYNT,
- NULL, gmac_rtbl, ARRAY_SIZE(gmac_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "gmac_phy_synth_clk", NULL);
- clk_register_clkdev(clk1, "gmac_phy_synth_gate_clk", NULL);
+ clk = clk_register_aux("phy_syn_clk", "phy_syn_gclk", "phy_input_mclk",
+ 0, SPEAR1340_GMAC_CLK_SYNT, NULL, gmac_rtbl,
+ ARRAY_SIZE(gmac_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "phy_syn_clk", NULL);
+ clk_register_clkdev(clk1, "phy_syn_gclk", NULL);
- clk = clk_register_mux(NULL, "gmac_phy_mux_clk", gmac_phy_parents,
+ clk = clk_register_mux(NULL, "phy_mclk", gmac_phy_parents,
ARRAY_SIZE(gmac_phy_parents), 0,
SPEAR1340_PERIP_CLK_CFG, SPEAR1340_GMAC_PHY_CLK_SHIFT,
SPEAR1340_GMAC_PHY_CLK_MASK, 0, &_lock);
clk_register_clkdev(clk, NULL, "stmmacphy.0");
/* clcd */
- clk = clk_register_mux(NULL, "clcd_synth_mux_clk", clcd_synth_parents,
+ clk = clk_register_mux(NULL, "clcd_syn_mclk", clcd_synth_parents,
ARRAY_SIZE(clcd_synth_parents), 0,
SPEAR1340_CLCD_CLK_SYNT, SPEAR1340_CLCD_SYNT_CLK_SHIFT,
SPEAR1340_CLCD_SYNT_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "clcd_synth_mux_clk", NULL);
+ clk_register_clkdev(clk, "clcd_syn_mclk", NULL);
- clk = clk_register_frac("clcd_synth_clk", "clcd_synth_mux_clk", 0,
+ clk = clk_register_frac("clcd_syn_clk", "clcd_syn_mclk", 0,
SPEAR1340_CLCD_CLK_SYNT, clcd_rtbl,
ARRAY_SIZE(clcd_rtbl), &_lock);
- clk_register_clkdev(clk, "clcd_synth_clk", NULL);
+ clk_register_clkdev(clk, "clcd_syn_clk", NULL);
- clk = clk_register_mux(NULL, "clcd_pixel_mux_clk", clcd_pixel_parents,
+ clk = clk_register_mux(NULL, "clcd_pixel_mclk", clcd_pixel_parents,
ARRAY_SIZE(clcd_pixel_parents), 0,
SPEAR1340_PERIP_CLK_CFG, SPEAR1340_CLCD_CLK_SHIFT,
SPEAR1340_CLCD_CLK_MASK, 0, &_lock);
clk_register_clkdev(clk, "clcd_pixel_clk", NULL);
- clk = clk_register_gate(NULL, "clcd_clk", "clcd_pixel_mux_clk", 0,
+ clk = clk_register_gate(NULL, "clcd_clk", "clcd_pixel_mclk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_CLCD_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, "clcd_clk", NULL);
/* i2s */
- clk = clk_register_mux(NULL, "i2s_src_mux_clk", i2s_src_parents,
+ clk = clk_register_mux(NULL, "i2s_src_mclk", i2s_src_parents,
ARRAY_SIZE(i2s_src_parents), 0, SPEAR1340_I2S_CLK_CFG,
SPEAR1340_I2S_SRC_CLK_SHIFT, SPEAR1340_I2S_SRC_CLK_MASK,
0, &_lock);
clk_register_clkdev(clk, "i2s_src_clk", NULL);
- clk = clk_register_aux("i2s_prs1_clk", NULL, "i2s_src_mux_clk", 0,
+ clk = clk_register_aux("i2s_prs1_clk", NULL, "i2s_src_mclk", 0,
SPEAR1340_I2S_CLK_CFG, &i2s_prs1_masks, i2s_prs1_rtbl,
ARRAY_SIZE(i2s_prs1_rtbl), &_lock, NULL);
clk_register_clkdev(clk, "i2s_prs1_clk", NULL);
- clk = clk_register_mux(NULL, "i2s_ref_mux_clk", i2s_ref_parents,
+ clk = clk_register_mux(NULL, "i2s_ref_mclk", i2s_ref_parents,
ARRAY_SIZE(i2s_ref_parents), 0, SPEAR1340_I2S_CLK_CFG,
SPEAR1340_I2S_REF_SHIFT, SPEAR1340_I2S_REF_SEL_MASK, 0,
&_lock);
clk_register_clkdev(clk, "i2s_ref_clk", NULL);
- clk = clk_register_gate(NULL, "i2s_ref_pad_clk", "i2s_ref_mux_clk", 0,
+ clk = clk_register_gate(NULL, "i2s_ref_pad_clk", "i2s_ref_mclk", 0,
SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_I2S_REF_PAD_CLK_ENB,
0, &_lock);
clk_register_clkdev(clk, "i2s_ref_pad_clk", NULL);
- clk = clk_register_aux("i2s_sclk_clk", "i2s_sclk_gate_clk",
- "i2s_ref_mux_clk", 0, SPEAR1340_I2S_CLK_CFG,
- &i2s_sclk_masks, i2s_sclk_rtbl,
- ARRAY_SIZE(i2s_sclk_rtbl), &_lock, &clk1);
+ clk = clk_register_aux("i2s_sclk_clk", "i2s_sclk_gclk", "i2s_ref_mclk",
+ 0, SPEAR1340_I2S_CLK_CFG, &i2s_sclk_masks,
+ i2s_sclk_rtbl, ARRAY_SIZE(i2s_sclk_rtbl), &_lock,
+ &clk1);
clk_register_clkdev(clk, "i2s_sclk_clk", NULL);
- clk_register_clkdev(clk1, "i2s_sclk_gate_clk", NULL);
+ clk_register_clkdev(clk1, "i2s_sclk_gclk", NULL);
/* clock derived from ahb clk */
clk = clk_register_gate(NULL, "i2c0_clk", "ahb_clk", 0,
clk_register_clkdev(clk, NULL, "e0280000.i2c");
clk = clk_register_gate(NULL, "i2c1_clk", "ahb_clk", 0,
- SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_I2C1_CLK_ENB, 0,
+ SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_I2C1_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "b4000000.i2c");
&_lock);
clk_register_clkdev(clk, "sysram1_clk", NULL);
- clk = clk_register_aux("adc_synth_clk", "adc_synth_gate_clk", "ahb_clk",
+ clk = clk_register_aux("adc_syn_clk", "adc_syn_gclk", "ahb_clk",
0, SPEAR1340_ADC_CLK_SYNT, NULL, adc_rtbl,
ARRAY_SIZE(adc_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "adc_synth_clk", NULL);
- clk_register_clkdev(clk1, "adc_synth_gate_clk", NULL);
+ clk_register_clkdev(clk, "adc_syn_clk", NULL);
+ clk_register_clkdev(clk1, "adc_syn_gclk", NULL);
- clk = clk_register_gate(NULL, "adc_clk", "adc_synth_gate_clk", 0,
+ clk = clk_register_gate(NULL, "adc_clk", "adc_syn_gclk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_ADC_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "adc_clk");
clk_register_clkdev(clk, NULL, "e0300000.kbd");
/* RAS clks */
- clk = clk_register_mux(NULL, "gen_synth0_1_mux_clk",
- gen_synth0_1_parents, ARRAY_SIZE(gen_synth0_1_parents),
- 0, SPEAR1340_PLL_CFG, SPEAR1340_GEN_SYNT0_1_CLK_SHIFT,
+ clk = clk_register_mux(NULL, "gen_syn0_1_mclk", gen_synth0_1_parents,
+ ARRAY_SIZE(gen_synth0_1_parents), 0, SPEAR1340_PLL_CFG,
+ SPEAR1340_GEN_SYNT0_1_CLK_SHIFT,
SPEAR1340_GEN_SYNT_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "gen_synth0_1_clk", NULL);
+ clk_register_clkdev(clk, "gen_syn0_1_clk", NULL);
- clk = clk_register_mux(NULL, "gen_synth2_3_mux_clk",
- gen_synth2_3_parents, ARRAY_SIZE(gen_synth2_3_parents),
- 0, SPEAR1340_PLL_CFG, SPEAR1340_GEN_SYNT2_3_CLK_SHIFT,
+ clk = clk_register_mux(NULL, "gen_syn2_3_mclk", gen_synth2_3_parents,
+ ARRAY_SIZE(gen_synth2_3_parents), 0, SPEAR1340_PLL_CFG,
+ SPEAR1340_GEN_SYNT2_3_CLK_SHIFT,
SPEAR1340_GEN_SYNT_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "gen_synth2_3_clk", NULL);
+ clk_register_clkdev(clk, "gen_syn2_3_clk", NULL);
- clk = clk_register_frac("gen_synth0_clk", "gen_synth0_1_clk", 0,
+ clk = clk_register_frac("gen_syn0_clk", "gen_syn0_1_clk", 0,
SPEAR1340_GEN_CLK_SYNT0, gen_rtbl, ARRAY_SIZE(gen_rtbl),
&_lock);
- clk_register_clkdev(clk, "gen_synth0_clk", NULL);
+ clk_register_clkdev(clk, "gen_syn0_clk", NULL);
- clk = clk_register_frac("gen_synth1_clk", "gen_synth0_1_clk", 0,
+ clk = clk_register_frac("gen_syn1_clk", "gen_syn0_1_clk", 0,
SPEAR1340_GEN_CLK_SYNT1, gen_rtbl, ARRAY_SIZE(gen_rtbl),
&_lock);
- clk_register_clkdev(clk, "gen_synth1_clk", NULL);
+ clk_register_clkdev(clk, "gen_syn1_clk", NULL);
- clk = clk_register_frac("gen_synth2_clk", "gen_synth2_3_clk", 0,
+ clk = clk_register_frac("gen_syn2_clk", "gen_syn2_3_clk", 0,
SPEAR1340_GEN_CLK_SYNT2, gen_rtbl, ARRAY_SIZE(gen_rtbl),
&_lock);
- clk_register_clkdev(clk, "gen_synth2_clk", NULL);
+ clk_register_clkdev(clk, "gen_syn2_clk", NULL);
- clk = clk_register_frac("gen_synth3_clk", "gen_synth2_3_clk", 0,
+ clk = clk_register_frac("gen_syn3_clk", "gen_syn2_3_clk", 0,
SPEAR1340_GEN_CLK_SYNT3, gen_rtbl, ARRAY_SIZE(gen_rtbl),
&_lock);
- clk_register_clkdev(clk, "gen_synth3_clk", NULL);
+ clk_register_clkdev(clk, "gen_syn3_clk", NULL);
- clk = clk_register_gate(NULL, "mali_clk", "gen_synth3_clk", 0,
+ clk = clk_register_gate(NULL, "mali_clk", "gen_syn3_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_MALI_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "mali");
&_lock);
clk_register_clkdev(clk, NULL, "spear_cec.1");
- clk = clk_register_mux(NULL, "spdif_out_mux_clk", spdif_out_parents,
+ clk = clk_register_mux(NULL, "spdif_out_mclk", spdif_out_parents,
ARRAY_SIZE(spdif_out_parents), 0,
SPEAR1340_PERIP_CLK_CFG, SPEAR1340_SPDIF_OUT_CLK_SHIFT,
SPEAR1340_SPDIF_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "spdif_out_mux_clk", NULL);
+ clk_register_clkdev(clk, "spdif_out_mclk", NULL);
- clk = clk_register_gate(NULL, "spdif_out_clk", "spdif_out_mux_clk", 0,
+ clk = clk_register_gate(NULL, "spdif_out_clk", "spdif_out_mclk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_SPDIF_OUT_CLK_ENB,
0, &_lock);
clk_register_clkdev(clk, NULL, "spdif-out");
- clk = clk_register_mux(NULL, "spdif_in_mux_clk", spdif_in_parents,
+ clk = clk_register_mux(NULL, "spdif_in_mclk", spdif_in_parents,
ARRAY_SIZE(spdif_in_parents), 0,
SPEAR1340_PERIP_CLK_CFG, SPEAR1340_SPDIF_IN_CLK_SHIFT,
SPEAR1340_SPDIF_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "spdif_in_mux_clk", NULL);
+ clk_register_clkdev(clk, "spdif_in_mclk", NULL);
- clk = clk_register_gate(NULL, "spdif_in_clk", "spdif_in_mux_clk", 0,
+ clk = clk_register_gate(NULL, "spdif_in_clk", "spdif_in_mclk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_SPDIF_IN_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "spdif-in");
- clk = clk_register_gate(NULL, "acp_clk", "acp_mux_clk", 0,
+ clk = clk_register_gate(NULL, "acp_clk", "acp_mclk", 0,
SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_ACP_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "acp_clk");
- clk = clk_register_gate(NULL, "plgpio_clk", "plgpio_mux_clk", 0,
+ clk = clk_register_gate(NULL, "plgpio_clk", "plgpio_mclk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_PLGPIO_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "plgpio");
- clk = clk_register_gate(NULL, "video_dec_clk", "video_dec_mux_clk", 0,
+ clk = clk_register_gate(NULL, "video_dec_clk", "video_dec_mclk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_DEC_CLK_ENB,
0, &_lock);
clk_register_clkdev(clk, NULL, "video_dec");
- clk = clk_register_gate(NULL, "video_enc_clk", "video_enc_mux_clk", 0,
+ clk = clk_register_gate(NULL, "video_enc_clk", "video_enc_mclk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_ENC_CLK_ENB,
0, &_lock);
clk_register_clkdev(clk, NULL, "video_enc");
- clk = clk_register_gate(NULL, "video_in_clk", "video_in_mux_clk", 0,
+ clk = clk_register_gate(NULL, "video_in_clk", "video_in_mclk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_IN_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "spear_vip");
- clk = clk_register_gate(NULL, "cam0_clk", "cam0_mux_clk", 0,
+ clk = clk_register_gate(NULL, "cam0_clk", "cam0_mclk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM0_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "spear_camif.0");
- clk = clk_register_gate(NULL, "cam1_clk", "cam1_mux_clk", 0,
+ clk = clk_register_gate(NULL, "cam1_clk", "cam1_mclk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM1_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "spear_camif.1");
- clk = clk_register_gate(NULL, "cam2_clk", "cam2_mux_clk", 0,
+ clk = clk_register_gate(NULL, "cam2_clk", "cam2_mclk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM2_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "spear_camif.2");
- clk = clk_register_gate(NULL, "cam3_clk", "cam3_mux_clk", 0,
+ clk = clk_register_gate(NULL, "cam3_clk", "cam3_mclk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM3_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "spear_camif.3");
- clk = clk_register_gate(NULL, "pwm_clk", "pwm_mux_clk", 0,
+ clk = clk_register_gate(NULL, "pwm_clk", "pwm_mclk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_PWM_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "pwm");
* SPEAr3xx machines clock framework source file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
};
/* clock parents */
-static const char *uart0_parents[] = { "pll3_48m_clk", "uart_synth_gate_clk", };
-static const char *firda_parents[] = { "pll3_48m_clk", "firda_synth_gate_clk",
+static const char *uart0_parents[] = { "pll3_clk", "uart_syn_gclk", };
+static const char *firda_parents[] = { "pll3_clk", "firda_syn_gclk",
};
-static const char *gpt0_parents[] = { "pll3_48m_clk", "gpt0_synth_clk", };
-static const char *gpt1_parents[] = { "pll3_48m_clk", "gpt1_synth_clk", };
-static const char *gpt2_parents[] = { "pll3_48m_clk", "gpt2_synth_clk", };
+static const char *gpt0_parents[] = { "pll3_clk", "gpt0_syn_clk", };
+static const char *gpt1_parents[] = { "pll3_clk", "gpt1_syn_clk", };
+static const char *gpt2_parents[] = { "pll3_clk", "gpt2_syn_clk", };
static const char *gen2_3_parents[] = { "pll1_clk", "pll2_clk", };
static const char *ddr_parents[] = { "ahb_clk", "ahbmult2_clk", "none",
"pll2_clk", };
{
struct clk *clk;
- clk = clk_register_fixed_factor(NULL, "clcd_clk", "ras_pll3_48m_clk", 0,
+ clk = clk_register_fixed_factor(NULL, "clcd_clk", "ras_pll3_clk", 0,
1, 1);
clk_register_clkdev(clk, NULL, "60000000.clcd");
#define SPEAR320_UARTX_PCLK_VAL_SYNTH1 0x0
#define SPEAR320_UARTX_PCLK_VAL_APB 0x1
-static const char *i2s_ref_parents[] = { "ras_pll2_clk",
- "ras_gen2_synth_gate_clk", };
-static const char *sdhci_parents[] = { "ras_pll3_48m_clk",
- "ras_gen3_synth_gate_clk",
-};
+static const char *i2s_ref_parents[] = { "ras_pll2_clk", "ras_syn2_gclk", };
+static const char *sdhci_parents[] = { "ras_pll3_clk", "ras_syn3_gclk", };
static const char *smii0_parents[] = { "smii_125m_pad", "ras_pll2_clk",
- "ras_gen0_synth_gate_clk", };
-static const char *uartx_parents[] = { "ras_gen1_synth_gate_clk", "ras_apb_clk",
-};
+ "ras_syn0_gclk", };
+static const char *uartx_parents[] = { "ras_syn1_gclk", "ras_apb_clk", };
static void __init spear320_clk_init(void)
{
CLK_IS_ROOT, 125000000);
clk_register_clkdev(clk, "smii_125m_pad", NULL);
- clk = clk_register_fixed_factor(NULL, "clcd_clk", "ras_pll3_48m_clk", 0,
+ clk = clk_register_fixed_factor(NULL, "clcd_clk", "ras_pll3_clk", 0,
1, 1);
clk_register_clkdev(clk, NULL, "90000000.clcd");
clk_register_clkdev(clk, NULL, "fc900000.rtc");
/* clock derived from 24 MHz osc clk */
- clk = clk_register_fixed_rate(NULL, "pll3_48m_clk", "osc_24m_clk", 0,
+ clk = clk_register_fixed_rate(NULL, "pll3_clk", "osc_24m_clk", 0,
48000000);
- clk_register_clkdev(clk, "pll3_48m_clk", NULL);
+ clk_register_clkdev(clk, "pll3_clk", NULL);
clk = clk_register_fixed_factor(NULL, "wdt_clk", "osc_24m_clk", 0, 1,
1);
HCLK_RATIO_MASK, 0, &_lock);
clk_register_clkdev(clk, "ahb_clk", NULL);
- clk = clk_register_aux("uart_synth_clk", "uart_synth_gate_clk",
- "pll1_clk", 0, UART_CLK_SYNT, NULL, aux_rtbl,
- ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "uart_synth_clk", NULL);
- clk_register_clkdev(clk1, "uart_synth_gate_clk", NULL);
+ clk = clk_register_aux("uart_syn_clk", "uart_syn_gclk", "pll1_clk", 0,
+ UART_CLK_SYNT, NULL, aux_rtbl, ARRAY_SIZE(aux_rtbl),
+ &_lock, &clk1);
+ clk_register_clkdev(clk, "uart_syn_clk", NULL);
+ clk_register_clkdev(clk1, "uart_syn_gclk", NULL);
- clk = clk_register_mux(NULL, "uart0_mux_clk", uart0_parents,
+ clk = clk_register_mux(NULL, "uart0_mclk", uart0_parents,
ARRAY_SIZE(uart0_parents), 0, PERIP_CLK_CFG,
UART_CLK_SHIFT, UART_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "uart0_mux_clk", NULL);
+ clk_register_clkdev(clk, "uart0_mclk", NULL);
- clk = clk_register_gate(NULL, "uart0", "uart0_mux_clk", 0,
- PERIP1_CLK_ENB, UART_CLK_ENB, 0, &_lock);
+ clk = clk_register_gate(NULL, "uart0", "uart0_mclk", 0, PERIP1_CLK_ENB,
+ UART_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "d0000000.serial");
- clk = clk_register_aux("firda_synth_clk", "firda_synth_gate_clk",
- "pll1_clk", 0, FIRDA_CLK_SYNT, NULL, aux_rtbl,
- ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "firda_synth_clk", NULL);
- clk_register_clkdev(clk1, "firda_synth_gate_clk", NULL);
+ clk = clk_register_aux("firda_syn_clk", "firda_syn_gclk", "pll1_clk", 0,
+ FIRDA_CLK_SYNT, NULL, aux_rtbl, ARRAY_SIZE(aux_rtbl),
+ &_lock, &clk1);
+ clk_register_clkdev(clk, "firda_syn_clk", NULL);
+ clk_register_clkdev(clk1, "firda_syn_gclk", NULL);
- clk = clk_register_mux(NULL, "firda_mux_clk", firda_parents,
+ clk = clk_register_mux(NULL, "firda_mclk", firda_parents,
ARRAY_SIZE(firda_parents), 0, PERIP_CLK_CFG,
FIRDA_CLK_SHIFT, FIRDA_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "firda_mux_clk", NULL);
+ clk_register_clkdev(clk, "firda_mclk", NULL);
- clk = clk_register_gate(NULL, "firda_clk", "firda_mux_clk", 0,
+ clk = clk_register_gate(NULL, "firda_clk", "firda_mclk", 0,
PERIP1_CLK_ENB, FIRDA_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "firda");
/* gpt clocks */
- clk_register_gpt("gpt0_synth_clk", "pll1_clk", 0, PRSC0_CLK_CFG,
- gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
+ clk_register_gpt("gpt0_syn_clk", "pll1_clk", 0, PRSC0_CLK_CFG, gpt_rtbl,
+ ARRAY_SIZE(gpt_rtbl), &_lock);
clk = clk_register_mux(NULL, "gpt0_clk", gpt0_parents,
ARRAY_SIZE(gpt0_parents), 0, PERIP_CLK_CFG,
GPT0_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
clk_register_clkdev(clk, NULL, "gpt0");
- clk_register_gpt("gpt1_synth_clk", "pll1_clk", 0, PRSC1_CLK_CFG,
- gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
- clk = clk_register_mux(NULL, "gpt1_mux_clk", gpt1_parents,
+ clk_register_gpt("gpt1_syn_clk", "pll1_clk", 0, PRSC1_CLK_CFG, gpt_rtbl,
+ ARRAY_SIZE(gpt_rtbl), &_lock);
+ clk = clk_register_mux(NULL, "gpt1_mclk", gpt1_parents,
ARRAY_SIZE(gpt1_parents), 0, PERIP_CLK_CFG,
GPT1_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "gpt1_mux_clk", NULL);
- clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mux_clk", 0,
+ clk_register_clkdev(clk, "gpt1_mclk", NULL);
+ clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mclk", 0,
PERIP1_CLK_ENB, GPT1_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "gpt1");
- clk_register_gpt("gpt2_synth_clk", "pll1_clk", 0, PRSC2_CLK_CFG,
- gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
- clk = clk_register_mux(NULL, "gpt2_mux_clk", gpt2_parents,
+ clk_register_gpt("gpt2_syn_clk", "pll1_clk", 0, PRSC2_CLK_CFG, gpt_rtbl,
+ ARRAY_SIZE(gpt_rtbl), &_lock);
+ clk = clk_register_mux(NULL, "gpt2_mclk", gpt2_parents,
ARRAY_SIZE(gpt2_parents), 0, PERIP_CLK_CFG,
GPT2_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "gpt2_mux_clk", NULL);
- clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mux_clk", 0,
+ clk_register_clkdev(clk, "gpt2_mclk", NULL);
+ clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mclk", 0,
PERIP1_CLK_ENB, GPT2_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "gpt2");
/* general synths clocks */
- clk = clk_register_aux("gen0_synth_clk", "gen0_synth_gate_clk",
- "pll1_clk", 0, GEN0_CLK_SYNT, NULL, aux_rtbl,
- ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "gen0_synth_clk", NULL);
- clk_register_clkdev(clk1, "gen0_synth_gate_clk", NULL);
-
- clk = clk_register_aux("gen1_synth_clk", "gen1_synth_gate_clk",
- "pll1_clk", 0, GEN1_CLK_SYNT, NULL, aux_rtbl,
- ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "gen1_synth_clk", NULL);
- clk_register_clkdev(clk1, "gen1_synth_gate_clk", NULL);
-
- clk = clk_register_mux(NULL, "gen2_3_parent_clk", gen2_3_parents,
+ clk = clk_register_aux("gen0_syn_clk", "gen0_syn_gclk", "pll1_clk",
+ 0, GEN0_CLK_SYNT, NULL, aux_rtbl, ARRAY_SIZE(aux_rtbl),
+ &_lock, &clk1);
+ clk_register_clkdev(clk, "gen0_syn_clk", NULL);
+ clk_register_clkdev(clk1, "gen0_syn_gclk", NULL);
+
+ clk = clk_register_aux("gen1_syn_clk", "gen1_syn_gclk", "pll1_clk",
+ 0, GEN1_CLK_SYNT, NULL, aux_rtbl, ARRAY_SIZE(aux_rtbl),
+ &_lock, &clk1);
+ clk_register_clkdev(clk, "gen1_syn_clk", NULL);
+ clk_register_clkdev(clk1, "gen1_syn_gclk", NULL);
+
+ clk = clk_register_mux(NULL, "gen2_3_par_clk", gen2_3_parents,
ARRAY_SIZE(gen2_3_parents), 0, CORE_CLK_CFG,
GEN_SYNTH2_3_CLK_SHIFT, GEN_SYNTH2_3_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "gen2_3_parent_clk", NULL);
+ clk_register_clkdev(clk, "gen2_3_par_clk", NULL);
- clk = clk_register_aux("gen2_synth_clk", "gen2_synth_gate_clk",
- "gen2_3_parent_clk", 0, GEN2_CLK_SYNT, NULL, aux_rtbl,
+ clk = clk_register_aux("gen2_syn_clk", "gen2_syn_gclk",
+ "gen2_3_par_clk", 0, GEN2_CLK_SYNT, NULL, aux_rtbl,
ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "gen2_synth_clk", NULL);
- clk_register_clkdev(clk1, "gen2_synth_gate_clk", NULL);
+ clk_register_clkdev(clk, "gen2_syn_clk", NULL);
+ clk_register_clkdev(clk1, "gen2_syn_gclk", NULL);
- clk = clk_register_aux("gen3_synth_clk", "gen3_synth_gate_clk",
- "gen2_3_parent_clk", 0, GEN3_CLK_SYNT, NULL, aux_rtbl,
+ clk = clk_register_aux("gen3_syn_clk", "gen3_syn_gclk",
+ "gen2_3_par_clk", 0, GEN3_CLK_SYNT, NULL, aux_rtbl,
ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "gen3_synth_clk", NULL);
- clk_register_clkdev(clk1, "gen3_synth_gate_clk", NULL);
+ clk_register_clkdev(clk, "gen3_syn_clk", NULL);
+ clk_register_clkdev(clk1, "gen3_syn_gclk", NULL);
/* clock derived from pll3 clk */
- clk = clk_register_gate(NULL, "usbh_clk", "pll3_48m_clk", 0,
- PERIP1_CLK_ENB, USBH_CLK_ENB, 0, &_lock);
+ clk = clk_register_gate(NULL, "usbh_clk", "pll3_clk", 0, PERIP1_CLK_ENB,
+ USBH_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, "usbh_clk", NULL);
clk = clk_register_fixed_factor(NULL, "usbh.0_clk", "usbh_clk", 0, 1,
1);
clk_register_clkdev(clk, "usbh.1_clk", NULL);
- clk = clk_register_gate(NULL, "usbd_clk", "pll3_48m_clk", 0,
- PERIP1_CLK_ENB, USBD_CLK_ENB, 0, &_lock);
+ clk = clk_register_gate(NULL, "usbd_clk", "pll3_clk", 0, PERIP1_CLK_ENB,
+ USBD_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "designware_udc");
/* clock derived from ahb clk */
RAS_CLK_ENB, RAS_PLL2_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, "ras_pll2_clk", NULL);
- clk = clk_register_gate(NULL, "ras_pll3_48m_clk", "pll3_48m_clk", 0,
+ clk = clk_register_gate(NULL, "ras_pll3_clk", "pll3_clk", 0,
RAS_CLK_ENB, RAS_48M_CLK_ENB, 0, &_lock);
- clk_register_clkdev(clk, "ras_pll3_48m_clk", NULL);
-
- clk = clk_register_gate(NULL, "ras_gen0_synth_gate_clk",
- "gen0_synth_gate_clk", 0, RAS_CLK_ENB,
- RAS_SYNT0_CLK_ENB, 0, &_lock);
- clk_register_clkdev(clk, "ras_gen0_synth_gate_clk", NULL);
-
- clk = clk_register_gate(NULL, "ras_gen1_synth_gate_clk",
- "gen1_synth_gate_clk", 0, RAS_CLK_ENB,
- RAS_SYNT1_CLK_ENB, 0, &_lock);
- clk_register_clkdev(clk, "ras_gen1_synth_gate_clk", NULL);
-
- clk = clk_register_gate(NULL, "ras_gen2_synth_gate_clk",
- "gen2_synth_gate_clk", 0, RAS_CLK_ENB,
- RAS_SYNT2_CLK_ENB, 0, &_lock);
- clk_register_clkdev(clk, "ras_gen2_synth_gate_clk", NULL);
-
- clk = clk_register_gate(NULL, "ras_gen3_synth_gate_clk",
- "gen3_synth_gate_clk", 0, RAS_CLK_ENB,
- RAS_SYNT3_CLK_ENB, 0, &_lock);
- clk_register_clkdev(clk, "ras_gen3_synth_gate_clk", NULL);
+ clk_register_clkdev(clk, "ras_pll3_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_syn0_gclk", "gen0_syn_gclk", 0,
+ RAS_CLK_ENB, RAS_SYNT0_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_syn0_gclk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_syn1_gclk", "gen1_syn_gclk", 0,
+ RAS_CLK_ENB, RAS_SYNT1_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_syn1_gclk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_syn2_gclk", "gen2_syn_gclk", 0,
+ RAS_CLK_ENB, RAS_SYNT2_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_syn2_gclk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_syn3_gclk", "gen3_syn_gclk", 0,
+ RAS_CLK_ENB, RAS_SYNT3_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_syn3_gclk", NULL);
if (of_machine_is_compatible("st,spear300"))
spear300_clk_init();
* SPEAr6xx machines clock framework source file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
{.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
};
-static const char *clcd_parents[] = { "pll3_48m_clk", "clcd_synth_gate_clk", };
-static const char *firda_parents[] = { "pll3_48m_clk", "firda_synth_gate_clk",
-};
-static const char *uart_parents[] = { "pll3_48m_clk", "uart_synth_gate_clk", };
-static const char *gpt0_1_parents[] = { "pll3_48m_clk", "gpt0_1_synth_clk", };
-static const char *gpt2_parents[] = { "pll3_48m_clk", "gpt2_synth_clk", };
-static const char *gpt3_parents[] = { "pll3_48m_clk", "gpt3_synth_clk", };
+static const char *clcd_parents[] = { "pll3_clk", "clcd_syn_gclk", };
+static const char *firda_parents[] = { "pll3_clk", "firda_syn_gclk", };
+static const char *uart_parents[] = { "pll3_clk", "uart_syn_gclk", };
+static const char *gpt0_1_parents[] = { "pll3_clk", "gpt0_1_syn_clk", };
+static const char *gpt2_parents[] = { "pll3_clk", "gpt2_syn_clk", };
+static const char *gpt3_parents[] = { "pll3_clk", "gpt3_syn_clk", };
static const char *ddr_parents[] = { "ahb_clk", "ahbmult2_clk", "none",
"pll2_clk", };
clk_register_clkdev(clk, NULL, "rtc-spear");
/* clock derived from 30 MHz osc clk */
- clk = clk_register_fixed_rate(NULL, "pll3_48m_clk", "osc_24m_clk", 0,
+ clk = clk_register_fixed_rate(NULL, "pll3_clk", "osc_24m_clk", 0,
48000000);
- clk_register_clkdev(clk, "pll3_48m_clk", NULL);
+ clk_register_clkdev(clk, "pll3_clk", NULL);
clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL, "osc_30m_clk",
0, PLL1_CTR, PLL1_FRQ, pll_rtbl, ARRAY_SIZE(pll_rtbl),
clk_register_clkdev(clk, "vco1_clk", NULL);
clk_register_clkdev(clk1, "pll1_clk", NULL);
- clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL,
- "osc_30m_clk", 0, PLL2_CTR, PLL2_FRQ, pll_rtbl,
- ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
+ clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL, "osc_30m_clk",
+ 0, PLL2_CTR, PLL2_FRQ, pll_rtbl, ARRAY_SIZE(pll_rtbl),
+ &_lock, &clk1, NULL);
clk_register_clkdev(clk, "vco2_clk", NULL);
clk_register_clkdev(clk1, "pll2_clk", NULL);
HCLK_RATIO_MASK, 0, &_lock);
clk_register_clkdev(clk, "ahb_clk", NULL);
- clk = clk_register_aux("uart_synth_clk", "uart_synth_gate_clk",
- "pll1_clk", 0, UART_CLK_SYNT, NULL, aux_rtbl,
- ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "uart_synth_clk", NULL);
- clk_register_clkdev(clk1, "uart_synth_gate_clk", NULL);
+ clk = clk_register_aux("uart_syn_clk", "uart_syn_gclk", "pll1_clk", 0,
+ UART_CLK_SYNT, NULL, aux_rtbl, ARRAY_SIZE(aux_rtbl),
+ &_lock, &clk1);
+ clk_register_clkdev(clk, "uart_syn_clk", NULL);
+ clk_register_clkdev(clk1, "uart_syn_gclk", NULL);
- clk = clk_register_mux(NULL, "uart_mux_clk", uart_parents,
+ clk = clk_register_mux(NULL, "uart_mclk", uart_parents,
ARRAY_SIZE(uart_parents), 0, PERIP_CLK_CFG,
UART_CLK_SHIFT, UART_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "uart_mux_clk", NULL);
+ clk_register_clkdev(clk, "uart_mclk", NULL);
- clk = clk_register_gate(NULL, "uart0", "uart_mux_clk", 0,
- PERIP1_CLK_ENB, UART0_CLK_ENB, 0, &_lock);
+ clk = clk_register_gate(NULL, "uart0", "uart_mclk", 0, PERIP1_CLK_ENB,
+ UART0_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "d0000000.serial");
- clk = clk_register_gate(NULL, "uart1", "uart_mux_clk", 0,
- PERIP1_CLK_ENB, UART1_CLK_ENB, 0, &_lock);
+ clk = clk_register_gate(NULL, "uart1", "uart_mclk", 0, PERIP1_CLK_ENB,
+ UART1_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "d0080000.serial");
- clk = clk_register_aux("firda_synth_clk", "firda_synth_gate_clk",
- "pll1_clk", 0, FIRDA_CLK_SYNT, NULL, aux_rtbl,
- ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "firda_synth_clk", NULL);
- clk_register_clkdev(clk1, "firda_synth_gate_clk", NULL);
+ clk = clk_register_aux("firda_syn_clk", "firda_syn_gclk", "pll1_clk",
+ 0, FIRDA_CLK_SYNT, NULL, aux_rtbl, ARRAY_SIZE(aux_rtbl),
+ &_lock, &clk1);
+ clk_register_clkdev(clk, "firda_syn_clk", NULL);
+ clk_register_clkdev(clk1, "firda_syn_gclk", NULL);
- clk = clk_register_mux(NULL, "firda_mux_clk", firda_parents,
+ clk = clk_register_mux(NULL, "firda_mclk", firda_parents,
ARRAY_SIZE(firda_parents), 0, PERIP_CLK_CFG,
FIRDA_CLK_SHIFT, FIRDA_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "firda_mux_clk", NULL);
+ clk_register_clkdev(clk, "firda_mclk", NULL);
- clk = clk_register_gate(NULL, "firda_clk", "firda_mux_clk", 0,
+ clk = clk_register_gate(NULL, "firda_clk", "firda_mclk", 0,
PERIP1_CLK_ENB, FIRDA_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "firda");
- clk = clk_register_aux("clcd_synth_clk", "clcd_synth_gate_clk",
- "pll1_clk", 0, CLCD_CLK_SYNT, NULL, aux_rtbl,
- ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "clcd_synth_clk", NULL);
- clk_register_clkdev(clk1, "clcd_synth_gate_clk", NULL);
+ clk = clk_register_aux("clcd_syn_clk", "clcd_syn_gclk", "pll1_clk",
+ 0, CLCD_CLK_SYNT, NULL, aux_rtbl, ARRAY_SIZE(aux_rtbl),
+ &_lock, &clk1);
+ clk_register_clkdev(clk, "clcd_syn_clk", NULL);
+ clk_register_clkdev(clk1, "clcd_syn_gclk", NULL);
- clk = clk_register_mux(NULL, "clcd_mux_clk", clcd_parents,
+ clk = clk_register_mux(NULL, "clcd_mclk", clcd_parents,
ARRAY_SIZE(clcd_parents), 0, PERIP_CLK_CFG,
CLCD_CLK_SHIFT, CLCD_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "clcd_mux_clk", NULL);
+ clk_register_clkdev(clk, "clcd_mclk", NULL);
- clk = clk_register_gate(NULL, "clcd_clk", "clcd_mux_clk", 0,
+ clk = clk_register_gate(NULL, "clcd_clk", "clcd_mclk", 0,
PERIP1_CLK_ENB, CLCD_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "clcd");
/* gpt clocks */
- clk = clk_register_gpt("gpt0_1_synth_clk", "pll1_clk", 0, PRSC0_CLK_CFG,
+ clk = clk_register_gpt("gpt0_1_syn_clk", "pll1_clk", 0, PRSC0_CLK_CFG,
gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
- clk_register_clkdev(clk, "gpt0_1_synth_clk", NULL);
+ clk_register_clkdev(clk, "gpt0_1_syn_clk", NULL);
- clk = clk_register_mux(NULL, "gpt0_mux_clk", gpt0_1_parents,
+ clk = clk_register_mux(NULL, "gpt0_mclk", gpt0_1_parents,
ARRAY_SIZE(gpt0_1_parents), 0, PERIP_CLK_CFG,
GPT0_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
clk_register_clkdev(clk, NULL, "gpt0");
- clk = clk_register_mux(NULL, "gpt1_mux_clk", gpt0_1_parents,
+ clk = clk_register_mux(NULL, "gpt1_mclk", gpt0_1_parents,
ARRAY_SIZE(gpt0_1_parents), 0, PERIP_CLK_CFG,
GPT1_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "gpt1_mux_clk", NULL);
+ clk_register_clkdev(clk, "gpt1_mclk", NULL);
- clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mux_clk", 0,
+ clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mclk", 0,
PERIP1_CLK_ENB, GPT1_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "gpt1");
- clk = clk_register_gpt("gpt2_synth_clk", "pll1_clk", 0, PRSC1_CLK_CFG,
+ clk = clk_register_gpt("gpt2_syn_clk", "pll1_clk", 0, PRSC1_CLK_CFG,
gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
- clk_register_clkdev(clk, "gpt2_synth_clk", NULL);
+ clk_register_clkdev(clk, "gpt2_syn_clk", NULL);
- clk = clk_register_mux(NULL, "gpt2_mux_clk", gpt2_parents,
+ clk = clk_register_mux(NULL, "gpt2_mclk", gpt2_parents,
ARRAY_SIZE(gpt2_parents), 0, PERIP_CLK_CFG,
GPT2_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "gpt2_mux_clk", NULL);
+ clk_register_clkdev(clk, "gpt2_mclk", NULL);
- clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mux_clk", 0,
+ clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mclk", 0,
PERIP1_CLK_ENB, GPT2_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "gpt2");
- clk = clk_register_gpt("gpt3_synth_clk", "pll1_clk", 0, PRSC2_CLK_CFG,
+ clk = clk_register_gpt("gpt3_syn_clk", "pll1_clk", 0, PRSC2_CLK_CFG,
gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
- clk_register_clkdev(clk, "gpt3_synth_clk", NULL);
+ clk_register_clkdev(clk, "gpt3_syn_clk", NULL);
- clk = clk_register_mux(NULL, "gpt3_mux_clk", gpt3_parents,
+ clk = clk_register_mux(NULL, "gpt3_mclk", gpt3_parents,
ARRAY_SIZE(gpt3_parents), 0, PERIP_CLK_CFG,
GPT3_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "gpt3_mux_clk", NULL);
+ clk_register_clkdev(clk, "gpt3_mclk", NULL);
- clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mux_clk", 0,
+ clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mclk", 0,
PERIP1_CLK_ENB, GPT3_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "gpt3");
/* clock derived from pll3 clk */
- clk = clk_register_gate(NULL, "usbh0_clk", "pll3_48m_clk", 0,
+ clk = clk_register_gate(NULL, "usbh0_clk", "pll3_clk", 0,
PERIP1_CLK_ENB, USBH0_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "usbh.0_clk");
- clk = clk_register_gate(NULL, "usbh1_clk", "pll3_48m_clk", 0,
+ clk = clk_register_gate(NULL, "usbh1_clk", "pll3_clk", 0,
PERIP1_CLK_ENB, USBH1_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "usbh.1_clk");
- clk = clk_register_gate(NULL, "usbd_clk", "pll3_48m_clk", 0,
- PERIP1_CLK_ENB, USBD_CLK_ENB, 0, &_lock);
+ clk = clk_register_gate(NULL, "usbd_clk", "pll3_clk", 0, PERIP1_CLK_ENB,
+ USBD_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "designware_udc");
/* clock derived from ahb clk */
clk_register_clkdev(clk, "ahbmult2_clk", NULL);
clk = clk_register_mux(NULL, "ddr_clk", ddr_parents,
- ARRAY_SIZE(ddr_parents),
- 0, PLL_CLK_CFG, MCTR_CLK_SHIFT, MCTR_CLK_MASK, 0,
- &_lock);
+ ARRAY_SIZE(ddr_parents), 0, PLL_CLK_CFG, MCTR_CLK_SHIFT,
+ MCTR_CLK_MASK, 0, &_lock);
clk_register_clkdev(clk, "ddr_clk", NULL);
clk = clk_register_divider(NULL, "apb_clk", "ahb_clk",
clk = clk_register_gate(NULL, "gmac_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
GMAC_CLK_ENB, 0, &_lock);
- clk_register_clkdev(clk, NULL, "gmac");
+ clk_register_clkdev(clk, NULL, "e0800000.ethernet");
clk = clk_register_gate(NULL, "i2c_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
I2C_CLK_ENB, 0, &_lock);
obj-$(CONFIG_SH_TIMER_CMT) += sh_cmt.o
obj-$(CONFIG_SH_TIMER_MTU2) += sh_mtu2.o
obj-$(CONFIG_SH_TIMER_TMU) += sh_tmu.o
+obj-$(CONFIG_EM_TIMER_STI) += em_sti.o
obj-$(CONFIG_CLKBLD_I8253) += i8253.o
obj-$(CONFIG_CLKSRC_MMIO) += mmio.o
obj-$(CONFIG_DW_APB_TIMER) += dw_apb_timer.o
--- /dev/null
+/*
+ * Emma Mobile Timer Support - STI
+ *
+ * Copyright (C) 2012 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+
+enum { USER_CLOCKSOURCE, USER_CLOCKEVENT, USER_NR };
+
+struct em_sti_priv {
+ void __iomem *base;
+ struct clk *clk;
+ struct platform_device *pdev;
+ unsigned int active[USER_NR];
+ unsigned long rate;
+ raw_spinlock_t lock;
+ struct clock_event_device ced;
+ struct clocksource cs;
+};
+
+#define STI_CONTROL 0x00
+#define STI_COMPA_H 0x10
+#define STI_COMPA_L 0x14
+#define STI_COMPB_H 0x18
+#define STI_COMPB_L 0x1c
+#define STI_COUNT_H 0x20
+#define STI_COUNT_L 0x24
+#define STI_COUNT_RAW_H 0x28
+#define STI_COUNT_RAW_L 0x2c
+#define STI_SET_H 0x30
+#define STI_SET_L 0x34
+#define STI_INTSTATUS 0x40
+#define STI_INTRAWSTATUS 0x44
+#define STI_INTENSET 0x48
+#define STI_INTENCLR 0x4c
+#define STI_INTFFCLR 0x50
+
+static inline unsigned long em_sti_read(struct em_sti_priv *p, int offs)
+{
+ return ioread32(p->base + offs);
+}
+
+static inline void em_sti_write(struct em_sti_priv *p, int offs,
+ unsigned long value)
+{
+ iowrite32(value, p->base + offs);
+}
+
+static int em_sti_enable(struct em_sti_priv *p)
+{
+ int ret;
+
+ /* enable clock */
+ ret = clk_enable(p->clk);
+ if (ret) {
+ dev_err(&p->pdev->dev, "cannot enable clock\n");
+ return ret;
+ }
+
+ /* configure channel, periodic mode and maximum timeout */
+ p->rate = clk_get_rate(p->clk);
+
+ /* reset the counter */
+ em_sti_write(p, STI_SET_H, 0x40000000);
+ em_sti_write(p, STI_SET_L, 0x00000000);
+
+ /* mask and clear pending interrupts */
+ em_sti_write(p, STI_INTENCLR, 3);
+ em_sti_write(p, STI_INTFFCLR, 3);
+
+ /* enable updates of counter registers */
+ em_sti_write(p, STI_CONTROL, 1);
+
+ return 0;
+}
+
+static void em_sti_disable(struct em_sti_priv *p)
+{
+ /* mask interrupts */
+ em_sti_write(p, STI_INTENCLR, 3);
+
+ /* stop clock */
+ clk_disable(p->clk);
+}
+
+static cycle_t em_sti_count(struct em_sti_priv *p)
+{
+ cycle_t ticks;
+ unsigned long flags;
+
+ /* the STI hardware buffers the 48-bit count, but to
+ * break it out into two 32-bit access the registers
+ * must be accessed in a certain order.
+ * Always read STI_COUNT_H before STI_COUNT_L.
+ */
+ raw_spin_lock_irqsave(&p->lock, flags);
+ ticks = (cycle_t)(em_sti_read(p, STI_COUNT_H) & 0xffff) << 32;
+ ticks |= em_sti_read(p, STI_COUNT_L);
+ raw_spin_unlock_irqrestore(&p->lock, flags);
+
+ return ticks;
+}
+
+static cycle_t em_sti_set_next(struct em_sti_priv *p, cycle_t next)
+{
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&p->lock, flags);
+
+ /* mask compare A interrupt */
+ em_sti_write(p, STI_INTENCLR, 1);
+
+ /* update compare A value */
+ em_sti_write(p, STI_COMPA_H, next >> 32);
+ em_sti_write(p, STI_COMPA_L, next & 0xffffffff);
+
+ /* clear compare A interrupt source */
+ em_sti_write(p, STI_INTFFCLR, 1);
+
+ /* unmask compare A interrupt */
+ em_sti_write(p, STI_INTENSET, 1);
+
+ raw_spin_unlock_irqrestore(&p->lock, flags);
+
+ return next;
+}
+
+static irqreturn_t em_sti_interrupt(int irq, void *dev_id)
+{
+ struct em_sti_priv *p = dev_id;
+
+ p->ced.event_handler(&p->ced);
+ return IRQ_HANDLED;
+}
+
+static int em_sti_start(struct em_sti_priv *p, unsigned int user)
+{
+ unsigned long flags;
+ int used_before;
+ int ret = 0;
+
+ raw_spin_lock_irqsave(&p->lock, flags);
+ used_before = p->active[USER_CLOCKSOURCE] | p->active[USER_CLOCKEVENT];
+ if (!used_before)
+ ret = em_sti_enable(p);
+
+ if (!ret)
+ p->active[user] = 1;
+ raw_spin_unlock_irqrestore(&p->lock, flags);
+
+ return ret;
+}
+
+static void em_sti_stop(struct em_sti_priv *p, unsigned int user)
+{
+ unsigned long flags;
+ int used_before, used_after;
+
+ raw_spin_lock_irqsave(&p->lock, flags);
+ used_before = p->active[USER_CLOCKSOURCE] | p->active[USER_CLOCKEVENT];
+ p->active[user] = 0;
+ used_after = p->active[USER_CLOCKSOURCE] | p->active[USER_CLOCKEVENT];
+
+ if (used_before && !used_after)
+ em_sti_disable(p);
+ raw_spin_unlock_irqrestore(&p->lock, flags);
+}
+
+static struct em_sti_priv *cs_to_em_sti(struct clocksource *cs)
+{
+ return container_of(cs, struct em_sti_priv, cs);
+}
+
+static cycle_t em_sti_clocksource_read(struct clocksource *cs)
+{
+ return em_sti_count(cs_to_em_sti(cs));
+}
+
+static int em_sti_clocksource_enable(struct clocksource *cs)
+{
+ int ret;
+ struct em_sti_priv *p = cs_to_em_sti(cs);
+
+ ret = em_sti_start(p, USER_CLOCKSOURCE);
+ if (!ret)
+ __clocksource_updatefreq_hz(cs, p->rate);
+ return ret;
+}
+
+static void em_sti_clocksource_disable(struct clocksource *cs)
+{
+ em_sti_stop(cs_to_em_sti(cs), USER_CLOCKSOURCE);
+}
+
+static void em_sti_clocksource_resume(struct clocksource *cs)
+{
+ em_sti_clocksource_enable(cs);
+}
+
+static int em_sti_register_clocksource(struct em_sti_priv *p)
+{
+ struct clocksource *cs = &p->cs;
+
+ memset(cs, 0, sizeof(*cs));
+ cs->name = dev_name(&p->pdev->dev);
+ cs->rating = 200;
+ cs->read = em_sti_clocksource_read;
+ cs->enable = em_sti_clocksource_enable;
+ cs->disable = em_sti_clocksource_disable;
+ cs->suspend = em_sti_clocksource_disable;
+ cs->resume = em_sti_clocksource_resume;
+ cs->mask = CLOCKSOURCE_MASK(48);
+ cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+ dev_info(&p->pdev->dev, "used as clock source\n");
+
+ /* Register with dummy 1 Hz value, gets updated in ->enable() */
+ clocksource_register_hz(cs, 1);
+ return 0;
+}
+
+static struct em_sti_priv *ced_to_em_sti(struct clock_event_device *ced)
+{
+ return container_of(ced, struct em_sti_priv, ced);
+}
+
+static void em_sti_clock_event_mode(enum clock_event_mode mode,
+ struct clock_event_device *ced)
+{
+ struct em_sti_priv *p = ced_to_em_sti(ced);
+
+ /* deal with old setting first */
+ switch (ced->mode) {
+ case CLOCK_EVT_MODE_ONESHOT:
+ em_sti_stop(p, USER_CLOCKEVENT);
+ break;
+ default:
+ break;
+ }
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_ONESHOT:
+ dev_info(&p->pdev->dev, "used for oneshot clock events\n");
+ em_sti_start(p, USER_CLOCKEVENT);
+ clockevents_config(&p->ced, p->rate);
+ break;
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_UNUSED:
+ em_sti_stop(p, USER_CLOCKEVENT);
+ break;
+ default:
+ break;
+ }
+}
+
+static int em_sti_clock_event_next(unsigned long delta,
+ struct clock_event_device *ced)
+{
+ struct em_sti_priv *p = ced_to_em_sti(ced);
+ cycle_t next;
+ int safe;
+
+ next = em_sti_set_next(p, em_sti_count(p) + delta);
+ safe = em_sti_count(p) < (next - 1);
+
+ return !safe;
+}
+
+static void em_sti_register_clockevent(struct em_sti_priv *p)
+{
+ struct clock_event_device *ced = &p->ced;
+
+ memset(ced, 0, sizeof(*ced));
+ ced->name = dev_name(&p->pdev->dev);
+ ced->features = CLOCK_EVT_FEAT_ONESHOT;
+ ced->rating = 200;
+ ced->cpumask = cpumask_of(0);
+ ced->set_next_event = em_sti_clock_event_next;
+ ced->set_mode = em_sti_clock_event_mode;
+
+ dev_info(&p->pdev->dev, "used for clock events\n");
+
+ /* Register with dummy 1 Hz value, gets updated in ->set_mode() */
+ clockevents_config_and_register(ced, 1, 2, 0xffffffff);
+}
+
+static int __devinit em_sti_probe(struct platform_device *pdev)
+{
+ struct em_sti_priv *p;
+ struct resource *res;
+ int irq, ret;
+
+ p = kzalloc(sizeof(*p), GFP_KERNEL);
+ if (p == NULL) {
+ dev_err(&pdev->dev, "failed to allocate driver data\n");
+ ret = -ENOMEM;
+ goto err0;
+ }
+
+ p->pdev = pdev;
+ platform_set_drvdata(pdev, p);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "failed to get I/O memory\n");
+ ret = -EINVAL;
+ goto err0;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "failed to get irq\n");
+ ret = -EINVAL;
+ goto err0;
+ }
+
+ /* map memory, let base point to the STI instance */
+ p->base = ioremap_nocache(res->start, resource_size(res));
+ if (p->base == NULL) {
+ dev_err(&pdev->dev, "failed to remap I/O memory\n");
+ ret = -ENXIO;
+ goto err0;
+ }
+
+ /* get hold of clock */
+ p->clk = clk_get(&pdev->dev, "sclk");
+ if (IS_ERR(p->clk)) {
+ dev_err(&pdev->dev, "cannot get clock\n");
+ ret = PTR_ERR(p->clk);
+ goto err1;
+ }
+
+ if (request_irq(irq, em_sti_interrupt,
+ IRQF_TIMER | IRQF_IRQPOLL | IRQF_NOBALANCING,
+ dev_name(&pdev->dev), p)) {
+ dev_err(&pdev->dev, "failed to request low IRQ\n");
+ ret = -ENOENT;
+ goto err2;
+ }
+
+ raw_spin_lock_init(&p->lock);
+ em_sti_register_clockevent(p);
+ em_sti_register_clocksource(p);
+ return 0;
+
+err2:
+ clk_put(p->clk);
+err1:
+ iounmap(p->base);
+err0:
+ kfree(p);
+ return ret;
+}
+
+static int __devexit em_sti_remove(struct platform_device *pdev)
+{
+ return -EBUSY; /* cannot unregister clockevent and clocksource */
+}
+
+static const struct of_device_id em_sti_dt_ids[] __devinitconst = {
+ { .compatible = "renesas,em-sti", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, em_sti_dt_ids);
+
+static struct platform_driver em_sti_device_driver = {
+ .probe = em_sti_probe,
+ .remove = __devexit_p(em_sti_remove),
+ .driver = {
+ .name = "em_sti",
+ .of_match_table = em_sti_dt_ids,
+ }
+};
+
+module_platform_driver(em_sti_device_driver);
+
+MODULE_AUTHOR("Magnus Damm");
+MODULE_DESCRIPTION("Renesas Emma Mobile STI Timer Driver");
+MODULE_LICENSE("GPL v2");
unsigned long next_match_value;
unsigned long max_match_value;
unsigned long rate;
- spinlock_t lock;
+ raw_spinlock_t lock;
struct clock_event_device ced;
struct clocksource cs;
unsigned long total_cycles;
};
-static DEFINE_SPINLOCK(sh_cmt_lock);
+static DEFINE_RAW_SPINLOCK(sh_cmt_lock);
#define CMSTR -1 /* shared register */
#define CMCSR 0 /* channel register */
unsigned long flags, value;
/* start stop register shared by multiple timer channels */
- spin_lock_irqsave(&sh_cmt_lock, flags);
+ raw_spin_lock_irqsave(&sh_cmt_lock, flags);
value = sh_cmt_read(p, CMSTR);
if (start)
value &= ~(1 << cfg->timer_bit);
sh_cmt_write(p, CMSTR, value);
- spin_unlock_irqrestore(&sh_cmt_lock, flags);
+ raw_spin_unlock_irqrestore(&sh_cmt_lock, flags);
}
static int sh_cmt_enable(struct sh_cmt_priv *p, unsigned long *rate)
{
unsigned long flags;
- spin_lock_irqsave(&p->lock, flags);
+ raw_spin_lock_irqsave(&p->lock, flags);
__sh_cmt_set_next(p, delta);
- spin_unlock_irqrestore(&p->lock, flags);
+ raw_spin_unlock_irqrestore(&p->lock, flags);
}
static irqreturn_t sh_cmt_interrupt(int irq, void *dev_id)
int ret = 0;
unsigned long flags;
- spin_lock_irqsave(&p->lock, flags);
+ raw_spin_lock_irqsave(&p->lock, flags);
if (!(p->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE)))
ret = sh_cmt_enable(p, &p->rate);
if ((flag == FLAG_CLOCKSOURCE) && (!(p->flags & FLAG_CLOCKEVENT)))
__sh_cmt_set_next(p, p->max_match_value);
out:
- spin_unlock_irqrestore(&p->lock, flags);
+ raw_spin_unlock_irqrestore(&p->lock, flags);
return ret;
}
unsigned long flags;
unsigned long f;
- spin_lock_irqsave(&p->lock, flags);
+ raw_spin_lock_irqsave(&p->lock, flags);
f = p->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE);
p->flags &= ~flag;
if ((flag == FLAG_CLOCKEVENT) && (p->flags & FLAG_CLOCKSOURCE))
__sh_cmt_set_next(p, p->max_match_value);
- spin_unlock_irqrestore(&p->lock, flags);
+ raw_spin_unlock_irqrestore(&p->lock, flags);
}
static struct sh_cmt_priv *cs_to_sh_cmt(struct clocksource *cs)
unsigned long value;
int has_wrapped;
- spin_lock_irqsave(&p->lock, flags);
+ raw_spin_lock_irqsave(&p->lock, flags);
value = p->total_cycles;
raw = sh_cmt_get_counter(p, &has_wrapped);
if (unlikely(has_wrapped))
raw += p->match_value + 1;
- spin_unlock_irqrestore(&p->lock, flags);
+ raw_spin_unlock_irqrestore(&p->lock, flags);
return value + raw;
}
p->max_match_value = (1 << p->width) - 1;
p->match_value = p->max_match_value;
- spin_lock_init(&p->lock);
+ raw_spin_lock_init(&p->lock);
if (clockevent_rating)
sh_cmt_register_clockevent(p, name, clockevent_rating);
struct clock_event_device ced;
};
-static DEFINE_SPINLOCK(sh_mtu2_lock);
+static DEFINE_RAW_SPINLOCK(sh_mtu2_lock);
#define TSTR -1 /* shared register */
#define TCR 0 /* channel register */
unsigned long flags, value;
/* start stop register shared by multiple timer channels */
- spin_lock_irqsave(&sh_mtu2_lock, flags);
+ raw_spin_lock_irqsave(&sh_mtu2_lock, flags);
value = sh_mtu2_read(p, TSTR);
if (start)
value &= ~(1 << cfg->timer_bit);
sh_mtu2_write(p, TSTR, value);
- spin_unlock_irqrestore(&sh_mtu2_lock, flags);
+ raw_spin_unlock_irqrestore(&sh_mtu2_lock, flags);
}
static int sh_mtu2_enable(struct sh_mtu2_priv *p)
struct clocksource cs;
};
-static DEFINE_SPINLOCK(sh_tmu_lock);
+static DEFINE_RAW_SPINLOCK(sh_tmu_lock);
#define TSTR -1 /* shared register */
#define TCOR 0 /* channel register */
unsigned long flags, value;
/* start stop register shared by multiple timer channels */
- spin_lock_irqsave(&sh_tmu_lock, flags);
+ raw_spin_lock_irqsave(&sh_tmu_lock, flags);
value = sh_tmu_read(p, TSTR);
if (start)
value &= ~(1 << cfg->timer_bit);
sh_tmu_write(p, TSTR, value);
- spin_unlock_irqrestore(&sh_tmu_lock, flags);
+ raw_spin_unlock_irqrestore(&sh_tmu_lock, flags);
}
static int sh_tmu_enable(struct sh_tmu_priv *p)
sh_tmu_enable(p);
- /* TODO: calculate good shift from rate and counter bit width */
-
- ced->shift = 32;
- ced->mult = div_sc(p->rate, NSEC_PER_SEC, ced->shift);
- ced->max_delta_ns = clockevent_delta2ns(0xffffffff, ced);
- ced->min_delta_ns = 5000;
+ clockevents_config(ced, p->rate);
if (periodic) {
p->periodic = (p->rate + HZ/2) / HZ;
ced->set_mode = sh_tmu_clock_event_mode;
dev_info(&p->pdev->dev, "used for clock events\n");
- clockevents_register_device(ced);
+
+ clockevents_config_and_register(ced, 1, 0x300, 0xffffffff);
ret = setup_irq(p->irqaction.irq, &p->irqaction);
if (ret) {
bool
depends on CPU_IDLE && NO_HZ
default y
+
+config ARCH_NEEDS_CPU_IDLE_COUPLED
+ def_bool n
#
obj-y += cpuidle.o driver.o governor.o sysfs.o governors/
+obj-$(CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED) += coupled.o
--- /dev/null
+/*
+ * coupled.c - helper functions to enter the same idle state on multiple cpus
+ *
+ * Copyright (c) 2011 Google, Inc.
+ *
+ * Author: Colin Cross <ccross@android.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/cpu.h>
+#include <linux/cpuidle.h>
+#include <linux/mutex.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#include "cpuidle.h"
+
+/**
+ * DOC: Coupled cpuidle states
+ *
+ * On some ARM SMP SoCs (OMAP4460, Tegra 2, and probably more), the
+ * cpus cannot be independently powered down, either due to
+ * sequencing restrictions (on Tegra 2, cpu 0 must be the last to
+ * power down), or due to HW bugs (on OMAP4460, a cpu powering up
+ * will corrupt the gic state unless the other cpu runs a work
+ * around). Each cpu has a power state that it can enter without
+ * coordinating with the other cpu (usually Wait For Interrupt, or
+ * WFI), and one or more "coupled" power states that affect blocks
+ * shared between the cpus (L2 cache, interrupt controller, and
+ * sometimes the whole SoC). Entering a coupled power state must
+ * be tightly controlled on both cpus.
+ *
+ * This file implements a solution, where each cpu will wait in the
+ * WFI state until all cpus are ready to enter a coupled state, at
+ * which point the coupled state function will be called on all
+ * cpus at approximately the same time.
+ *
+ * Once all cpus are ready to enter idle, they are woken by an smp
+ * cross call. At this point, there is a chance that one of the
+ * cpus will find work to do, and choose not to enter idle. A
+ * final pass is needed to guarantee that all cpus will call the
+ * power state enter function at the same time. During this pass,
+ * each cpu will increment the ready counter, and continue once the
+ * ready counter matches the number of online coupled cpus. If any
+ * cpu exits idle, the other cpus will decrement their counter and
+ * retry.
+ *
+ * requested_state stores the deepest coupled idle state each cpu
+ * is ready for. It is assumed that the states are indexed from
+ * shallowest (highest power, lowest exit latency) to deepest
+ * (lowest power, highest exit latency). The requested_state
+ * variable is not locked. It is only written from the cpu that
+ * it stores (or by the on/offlining cpu if that cpu is offline),
+ * and only read after all the cpus are ready for the coupled idle
+ * state are are no longer updating it.
+ *
+ * Three atomic counters are used. alive_count tracks the number
+ * of cpus in the coupled set that are currently or soon will be
+ * online. waiting_count tracks the number of cpus that are in
+ * the waiting loop, in the ready loop, or in the coupled idle state.
+ * ready_count tracks the number of cpus that are in the ready loop
+ * or in the coupled idle state.
+ *
+ * To use coupled cpuidle states, a cpuidle driver must:
+ *
+ * Set struct cpuidle_device.coupled_cpus to the mask of all
+ * coupled cpus, usually the same as cpu_possible_mask if all cpus
+ * are part of the same cluster. The coupled_cpus mask must be
+ * set in the struct cpuidle_device for each cpu.
+ *
+ * Set struct cpuidle_device.safe_state to a state that is not a
+ * coupled state. This is usually WFI.
+ *
+ * Set CPUIDLE_FLAG_COUPLED in struct cpuidle_state.flags for each
+ * state that affects multiple cpus.
+ *
+ * Provide a struct cpuidle_state.enter function for each state
+ * that affects multiple cpus. This function is guaranteed to be
+ * called on all cpus at approximately the same time. The driver
+ * should ensure that the cpus all abort together if any cpu tries
+ * to abort once the function is called. The function should return
+ * with interrupts still disabled.
+ */
+
+/**
+ * struct cpuidle_coupled - data for set of cpus that share a coupled idle state
+ * @coupled_cpus: mask of cpus that are part of the coupled set
+ * @requested_state: array of requested states for cpus in the coupled set
+ * @ready_waiting_counts: combined count of cpus in ready or waiting loops
+ * @online_count: count of cpus that are online
+ * @refcnt: reference count of cpuidle devices that are using this struct
+ * @prevent: flag to prevent coupled idle while a cpu is hotplugging
+ */
+struct cpuidle_coupled {
+ cpumask_t coupled_cpus;
+ int requested_state[NR_CPUS];
+ atomic_t ready_waiting_counts;
+ int online_count;
+ int refcnt;
+ int prevent;
+};
+
+#define WAITING_BITS 16
+#define MAX_WAITING_CPUS (1 << WAITING_BITS)
+#define WAITING_MASK (MAX_WAITING_CPUS - 1)
+#define READY_MASK (~WAITING_MASK)
+
+#define CPUIDLE_COUPLED_NOT_IDLE (-1)
+
+static DEFINE_MUTEX(cpuidle_coupled_lock);
+static DEFINE_PER_CPU(struct call_single_data, cpuidle_coupled_poke_cb);
+
+/*
+ * The cpuidle_coupled_poked_mask mask is used to avoid calling
+ * __smp_call_function_single with the per cpu call_single_data struct already
+ * in use. This prevents a deadlock where two cpus are waiting for each others
+ * call_single_data struct to be available
+ */
+static cpumask_t cpuidle_coupled_poked_mask;
+
+/**
+ * cpuidle_coupled_parallel_barrier - synchronize all online coupled cpus
+ * @dev: cpuidle_device of the calling cpu
+ * @a: atomic variable to hold the barrier
+ *
+ * No caller to this function will return from this function until all online
+ * cpus in the same coupled group have called this function. Once any caller
+ * has returned from this function, the barrier is immediately available for
+ * reuse.
+ *
+ * The atomic variable a must be initialized to 0 before any cpu calls
+ * this function, will be reset to 0 before any cpu returns from this function.
+ *
+ * Must only be called from within a coupled idle state handler
+ * (state.enter when state.flags has CPUIDLE_FLAG_COUPLED set).
+ *
+ * Provides full smp barrier semantics before and after calling.
+ */
+void cpuidle_coupled_parallel_barrier(struct cpuidle_device *dev, atomic_t *a)
+{
+ int n = dev->coupled->online_count;
+
+ smp_mb__before_atomic_inc();
+ atomic_inc(a);
+
+ while (atomic_read(a) < n)
+ cpu_relax();
+
+ if (atomic_inc_return(a) == n * 2) {
+ atomic_set(a, 0);
+ return;
+ }
+
+ while (atomic_read(a) > n)
+ cpu_relax();
+}
+
+/**
+ * cpuidle_state_is_coupled - check if a state is part of a coupled set
+ * @dev: struct cpuidle_device for the current cpu
+ * @drv: struct cpuidle_driver for the platform
+ * @state: index of the target state in drv->states
+ *
+ * Returns true if the target state is coupled with cpus besides this one
+ */
+bool cpuidle_state_is_coupled(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv, int state)
+{
+ return drv->states[state].flags & CPUIDLE_FLAG_COUPLED;
+}
+
+/**
+ * cpuidle_coupled_set_ready - mark a cpu as ready
+ * @coupled: the struct coupled that contains the current cpu
+ */
+static inline void cpuidle_coupled_set_ready(struct cpuidle_coupled *coupled)
+{
+ atomic_add(MAX_WAITING_CPUS, &coupled->ready_waiting_counts);
+}
+
+/**
+ * cpuidle_coupled_set_not_ready - mark a cpu as not ready
+ * @coupled: the struct coupled that contains the current cpu
+ *
+ * Decrements the ready counter, unless the ready (and thus the waiting) counter
+ * is equal to the number of online cpus. Prevents a race where one cpu
+ * decrements the waiting counter and then re-increments it just before another
+ * cpu has decremented its ready counter, leading to the ready counter going
+ * down from the number of online cpus without going through the coupled idle
+ * state.
+ *
+ * Returns 0 if the counter was decremented successfully, -EINVAL if the ready
+ * counter was equal to the number of online cpus.
+ */
+static
+inline int cpuidle_coupled_set_not_ready(struct cpuidle_coupled *coupled)
+{
+ int all;
+ int ret;
+
+ all = coupled->online_count || (coupled->online_count << WAITING_BITS);
+ ret = atomic_add_unless(&coupled->ready_waiting_counts,
+ -MAX_WAITING_CPUS, all);
+
+ return ret ? 0 : -EINVAL;
+}
+
+/**
+ * cpuidle_coupled_no_cpus_ready - check if no cpus in a coupled set are ready
+ * @coupled: the struct coupled that contains the current cpu
+ *
+ * Returns true if all of the cpus in a coupled set are out of the ready loop.
+ */
+static inline int cpuidle_coupled_no_cpus_ready(struct cpuidle_coupled *coupled)
+{
+ int r = atomic_read(&coupled->ready_waiting_counts) >> WAITING_BITS;
+ return r == 0;
+}
+
+/**
+ * cpuidle_coupled_cpus_ready - check if all cpus in a coupled set are ready
+ * @coupled: the struct coupled that contains the current cpu
+ *
+ * Returns true if all cpus coupled to this target state are in the ready loop
+ */
+static inline bool cpuidle_coupled_cpus_ready(struct cpuidle_coupled *coupled)
+{
+ int r = atomic_read(&coupled->ready_waiting_counts) >> WAITING_BITS;
+ return r == coupled->online_count;
+}
+
+/**
+ * cpuidle_coupled_cpus_waiting - check if all cpus in a coupled set are waiting
+ * @coupled: the struct coupled that contains the current cpu
+ *
+ * Returns true if all cpus coupled to this target state are in the wait loop
+ */
+static inline bool cpuidle_coupled_cpus_waiting(struct cpuidle_coupled *coupled)
+{
+ int w = atomic_read(&coupled->ready_waiting_counts) & WAITING_MASK;
+ return w == coupled->online_count;
+}
+
+/**
+ * cpuidle_coupled_no_cpus_waiting - check if no cpus in coupled set are waiting
+ * @coupled: the struct coupled that contains the current cpu
+ *
+ * Returns true if all of the cpus in a coupled set are out of the waiting loop.
+ */
+static inline int cpuidle_coupled_no_cpus_waiting(struct cpuidle_coupled *coupled)
+{
+ int w = atomic_read(&coupled->ready_waiting_counts) & WAITING_MASK;
+ return w == 0;
+}
+
+/**
+ * cpuidle_coupled_get_state - determine the deepest idle state
+ * @dev: struct cpuidle_device for this cpu
+ * @coupled: the struct coupled that contains the current cpu
+ *
+ * Returns the deepest idle state that all coupled cpus can enter
+ */
+static inline int cpuidle_coupled_get_state(struct cpuidle_device *dev,
+ struct cpuidle_coupled *coupled)
+{
+ int i;
+ int state = INT_MAX;
+
+ /*
+ * Read barrier ensures that read of requested_state is ordered after
+ * reads of ready_count. Matches the write barriers
+ * cpuidle_set_state_waiting.
+ */
+ smp_rmb();
+
+ for_each_cpu_mask(i, coupled->coupled_cpus)
+ if (cpu_online(i) && coupled->requested_state[i] < state)
+ state = coupled->requested_state[i];
+
+ return state;
+}
+
+static void cpuidle_coupled_poked(void *info)
+{
+ int cpu = (unsigned long)info;
+ cpumask_clear_cpu(cpu, &cpuidle_coupled_poked_mask);
+}
+
+/**
+ * cpuidle_coupled_poke - wake up a cpu that may be waiting
+ * @cpu: target cpu
+ *
+ * Ensures that the target cpu exits it's waiting idle state (if it is in it)
+ * and will see updates to waiting_count before it re-enters it's waiting idle
+ * state.
+ *
+ * If cpuidle_coupled_poked_mask is already set for the target cpu, that cpu
+ * either has or will soon have a pending IPI that will wake it out of idle,
+ * or it is currently processing the IPI and is not in idle.
+ */
+static void cpuidle_coupled_poke(int cpu)
+{
+ struct call_single_data *csd = &per_cpu(cpuidle_coupled_poke_cb, cpu);
+
+ if (!cpumask_test_and_set_cpu(cpu, &cpuidle_coupled_poked_mask))
+ __smp_call_function_single(cpu, csd, 0);
+}
+
+/**
+ * cpuidle_coupled_poke_others - wake up all other cpus that may be waiting
+ * @dev: struct cpuidle_device for this cpu
+ * @coupled: the struct coupled that contains the current cpu
+ *
+ * Calls cpuidle_coupled_poke on all other online cpus.
+ */
+static void cpuidle_coupled_poke_others(int this_cpu,
+ struct cpuidle_coupled *coupled)
+{
+ int cpu;
+
+ for_each_cpu_mask(cpu, coupled->coupled_cpus)
+ if (cpu != this_cpu && cpu_online(cpu))
+ cpuidle_coupled_poke(cpu);
+}
+
+/**
+ * cpuidle_coupled_set_waiting - mark this cpu as in the wait loop
+ * @dev: struct cpuidle_device for this cpu
+ * @coupled: the struct coupled that contains the current cpu
+ * @next_state: the index in drv->states of the requested state for this cpu
+ *
+ * Updates the requested idle state for the specified cpuidle device,
+ * poking all coupled cpus out of idle if necessary to let them see the new
+ * state.
+ */
+static void cpuidle_coupled_set_waiting(int cpu,
+ struct cpuidle_coupled *coupled, int next_state)
+{
+ int w;
+
+ coupled->requested_state[cpu] = next_state;
+
+ /*
+ * If this is the last cpu to enter the waiting state, poke
+ * all the other cpus out of their waiting state so they can
+ * enter a deeper state. This can race with one of the cpus
+ * exiting the waiting state due to an interrupt and
+ * decrementing waiting_count, see comment below.
+ *
+ * The atomic_inc_return provides a write barrier to order the write
+ * to requested_state with the later write that increments ready_count.
+ */
+ w = atomic_inc_return(&coupled->ready_waiting_counts) & WAITING_MASK;
+ if (w == coupled->online_count)
+ cpuidle_coupled_poke_others(cpu, coupled);
+}
+
+/**
+ * cpuidle_coupled_set_not_waiting - mark this cpu as leaving the wait loop
+ * @dev: struct cpuidle_device for this cpu
+ * @coupled: the struct coupled that contains the current cpu
+ *
+ * Removes the requested idle state for the specified cpuidle device.
+ */
+static void cpuidle_coupled_set_not_waiting(int cpu,
+ struct cpuidle_coupled *coupled)
+{
+ /*
+ * Decrementing waiting count can race with incrementing it in
+ * cpuidle_coupled_set_waiting, but that's OK. Worst case, some
+ * cpus will increment ready_count and then spin until they
+ * notice that this cpu has cleared it's requested_state.
+ */
+ atomic_dec(&coupled->ready_waiting_counts);
+
+ coupled->requested_state[cpu] = CPUIDLE_COUPLED_NOT_IDLE;
+}
+
+/**
+ * cpuidle_coupled_set_done - mark this cpu as leaving the ready loop
+ * @cpu: the current cpu
+ * @coupled: the struct coupled that contains the current cpu
+ *
+ * Marks this cpu as no longer in the ready and waiting loops. Decrements
+ * the waiting count first to prevent another cpu looping back in and seeing
+ * this cpu as waiting just before it exits idle.
+ */
+static void cpuidle_coupled_set_done(int cpu, struct cpuidle_coupled *coupled)
+{
+ cpuidle_coupled_set_not_waiting(cpu, coupled);
+ atomic_sub(MAX_WAITING_CPUS, &coupled->ready_waiting_counts);
+}
+
+/**
+ * cpuidle_coupled_clear_pokes - spin until the poke interrupt is processed
+ * @cpu - this cpu
+ *
+ * Turns on interrupts and spins until any outstanding poke interrupts have
+ * been processed and the poke bit has been cleared.
+ *
+ * Other interrupts may also be processed while interrupts are enabled, so
+ * need_resched() must be tested after turning interrupts off again to make sure
+ * the interrupt didn't schedule work that should take the cpu out of idle.
+ *
+ * Returns 0 if need_resched was false, -EINTR if need_resched was true.
+ */
+static int cpuidle_coupled_clear_pokes(int cpu)
+{
+ local_irq_enable();
+ while (cpumask_test_cpu(cpu, &cpuidle_coupled_poked_mask))
+ cpu_relax();
+ local_irq_disable();
+
+ return need_resched() ? -EINTR : 0;
+}
+
+/**
+ * cpuidle_enter_state_coupled - attempt to enter a state with coupled cpus
+ * @dev: struct cpuidle_device for the current cpu
+ * @drv: struct cpuidle_driver for the platform
+ * @next_state: index of the requested state in drv->states
+ *
+ * Coordinate with coupled cpus to enter the target state. This is a two
+ * stage process. In the first stage, the cpus are operating independently,
+ * and may call into cpuidle_enter_state_coupled at completely different times.
+ * To save as much power as possible, the first cpus to call this function will
+ * go to an intermediate state (the cpuidle_device's safe state), and wait for
+ * all the other cpus to call this function. Once all coupled cpus are idle,
+ * the second stage will start. Each coupled cpu will spin until all cpus have
+ * guaranteed that they will call the target_state.
+ *
+ * This function must be called with interrupts disabled. It may enable
+ * interrupts while preparing for idle, and it will always return with
+ * interrupts enabled.
+ */
+int cpuidle_enter_state_coupled(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv, int next_state)
+{
+ int entered_state = -1;
+ struct cpuidle_coupled *coupled = dev->coupled;
+
+ if (!coupled)
+ return -EINVAL;
+
+ while (coupled->prevent) {
+ if (cpuidle_coupled_clear_pokes(dev->cpu)) {
+ local_irq_enable();
+ return entered_state;
+ }
+ entered_state = cpuidle_enter_state(dev, drv,
+ dev->safe_state_index);
+ }
+
+ /* Read barrier ensures online_count is read after prevent is cleared */
+ smp_rmb();
+
+ cpuidle_coupled_set_waiting(dev->cpu, coupled, next_state);
+
+retry:
+ /*
+ * Wait for all coupled cpus to be idle, using the deepest state
+ * allowed for a single cpu.
+ */
+ while (!cpuidle_coupled_cpus_waiting(coupled)) {
+ if (cpuidle_coupled_clear_pokes(dev->cpu)) {
+ cpuidle_coupled_set_not_waiting(dev->cpu, coupled);
+ goto out;
+ }
+
+ if (coupled->prevent) {
+ cpuidle_coupled_set_not_waiting(dev->cpu, coupled);
+ goto out;
+ }
+
+ entered_state = cpuidle_enter_state(dev, drv,
+ dev->safe_state_index);
+ }
+
+ if (cpuidle_coupled_clear_pokes(dev->cpu)) {
+ cpuidle_coupled_set_not_waiting(dev->cpu, coupled);
+ goto out;
+ }
+
+ /*
+ * All coupled cpus are probably idle. There is a small chance that
+ * one of the other cpus just became active. Increment the ready count,
+ * and spin until all coupled cpus have incremented the counter. Once a
+ * cpu has incremented the ready counter, it cannot abort idle and must
+ * spin until either all cpus have incremented the ready counter, or
+ * another cpu leaves idle and decrements the waiting counter.
+ */
+
+ cpuidle_coupled_set_ready(coupled);
+ while (!cpuidle_coupled_cpus_ready(coupled)) {
+ /* Check if any other cpus bailed out of idle. */
+ if (!cpuidle_coupled_cpus_waiting(coupled))
+ if (!cpuidle_coupled_set_not_ready(coupled))
+ goto retry;
+
+ cpu_relax();
+ }
+
+ /* all cpus have acked the coupled state */
+ next_state = cpuidle_coupled_get_state(dev, coupled);
+
+ entered_state = cpuidle_enter_state(dev, drv, next_state);
+
+ cpuidle_coupled_set_done(dev->cpu, coupled);
+
+out:
+ /*
+ * Normal cpuidle states are expected to return with irqs enabled.
+ * That leads to an inefficiency where a cpu receiving an interrupt
+ * that brings it out of idle will process that interrupt before
+ * exiting the idle enter function and decrementing ready_count. All
+ * other cpus will need to spin waiting for the cpu that is processing
+ * the interrupt. If the driver returns with interrupts disabled,
+ * all other cpus will loop back into the safe idle state instead of
+ * spinning, saving power.
+ *
+ * Calling local_irq_enable here allows coupled states to return with
+ * interrupts disabled, but won't cause problems for drivers that
+ * exit with interrupts enabled.
+ */
+ local_irq_enable();
+
+ /*
+ * Wait until all coupled cpus have exited idle. There is no risk that
+ * a cpu exits and re-enters the ready state because this cpu has
+ * already decremented its waiting_count.
+ */
+ while (!cpuidle_coupled_no_cpus_ready(coupled))
+ cpu_relax();
+
+ return entered_state;
+}
+
+static void cpuidle_coupled_update_online_cpus(struct cpuidle_coupled *coupled)
+{
+ cpumask_t cpus;
+ cpumask_and(&cpus, cpu_online_mask, &coupled->coupled_cpus);
+ coupled->online_count = cpumask_weight(&cpus);
+}
+
+/**
+ * cpuidle_coupled_register_device - register a coupled cpuidle device
+ * @dev: struct cpuidle_device for the current cpu
+ *
+ * Called from cpuidle_register_device to handle coupled idle init. Finds the
+ * cpuidle_coupled struct for this set of coupled cpus, or creates one if none
+ * exists yet.
+ */
+int cpuidle_coupled_register_device(struct cpuidle_device *dev)
+{
+ int cpu;
+ struct cpuidle_device *other_dev;
+ struct call_single_data *csd;
+ struct cpuidle_coupled *coupled;
+
+ if (cpumask_empty(&dev->coupled_cpus))
+ return 0;
+
+ for_each_cpu_mask(cpu, dev->coupled_cpus) {
+ other_dev = per_cpu(cpuidle_devices, cpu);
+ if (other_dev && other_dev->coupled) {
+ coupled = other_dev->coupled;
+ goto have_coupled;
+ }
+ }
+
+ /* No existing coupled info found, create a new one */
+ coupled = kzalloc(sizeof(struct cpuidle_coupled), GFP_KERNEL);
+ if (!coupled)
+ return -ENOMEM;
+
+ coupled->coupled_cpus = dev->coupled_cpus;
+
+have_coupled:
+ dev->coupled = coupled;
+ if (WARN_ON(!cpumask_equal(&dev->coupled_cpus, &coupled->coupled_cpus)))
+ coupled->prevent++;
+
+ cpuidle_coupled_update_online_cpus(coupled);
+
+ coupled->refcnt++;
+
+ csd = &per_cpu(cpuidle_coupled_poke_cb, dev->cpu);
+ csd->func = cpuidle_coupled_poked;
+ csd->info = (void *)(unsigned long)dev->cpu;
+
+ return 0;
+}
+
+/**
+ * cpuidle_coupled_unregister_device - unregister a coupled cpuidle device
+ * @dev: struct cpuidle_device for the current cpu
+ *
+ * Called from cpuidle_unregister_device to tear down coupled idle. Removes the
+ * cpu from the coupled idle set, and frees the cpuidle_coupled_info struct if
+ * this was the last cpu in the set.
+ */
+void cpuidle_coupled_unregister_device(struct cpuidle_device *dev)
+{
+ struct cpuidle_coupled *coupled = dev->coupled;
+
+ if (cpumask_empty(&dev->coupled_cpus))
+ return;
+
+ if (--coupled->refcnt)
+ kfree(coupled);
+ dev->coupled = NULL;
+}
+
+/**
+ * cpuidle_coupled_prevent_idle - prevent cpus from entering a coupled state
+ * @coupled: the struct coupled that contains the cpu that is changing state
+ *
+ * Disables coupled cpuidle on a coupled set of cpus. Used to ensure that
+ * cpu_online_mask doesn't change while cpus are coordinating coupled idle.
+ */
+static void cpuidle_coupled_prevent_idle(struct cpuidle_coupled *coupled)
+{
+ int cpu = get_cpu();
+
+ /* Force all cpus out of the waiting loop. */
+ coupled->prevent++;
+ cpuidle_coupled_poke_others(cpu, coupled);
+ put_cpu();
+ while (!cpuidle_coupled_no_cpus_waiting(coupled))
+ cpu_relax();
+}
+
+/**
+ * cpuidle_coupled_allow_idle - allows cpus to enter a coupled state
+ * @coupled: the struct coupled that contains the cpu that is changing state
+ *
+ * Enables coupled cpuidle on a coupled set of cpus. Used to ensure that
+ * cpu_online_mask doesn't change while cpus are coordinating coupled idle.
+ */
+static void cpuidle_coupled_allow_idle(struct cpuidle_coupled *coupled)
+{
+ int cpu = get_cpu();
+
+ /*
+ * Write barrier ensures readers see the new online_count when they
+ * see prevent == 0.
+ */
+ smp_wmb();
+ coupled->prevent--;
+ /* Force cpus out of the prevent loop. */
+ cpuidle_coupled_poke_others(cpu, coupled);
+ put_cpu();
+}
+
+/**
+ * cpuidle_coupled_cpu_notify - notifier called during hotplug transitions
+ * @nb: notifier block
+ * @action: hotplug transition
+ * @hcpu: target cpu number
+ *
+ * Called when a cpu is brought on or offline using hotplug. Updates the
+ * coupled cpu set appropriately
+ */
+static int cpuidle_coupled_cpu_notify(struct notifier_block *nb,
+ unsigned long action, void *hcpu)
+{
+ int cpu = (unsigned long)hcpu;
+ struct cpuidle_device *dev;
+
+ mutex_lock(&cpuidle_lock);
+
+ dev = per_cpu(cpuidle_devices, cpu);
+ if (!dev->coupled)
+ goto out;
+
+ switch (action & ~CPU_TASKS_FROZEN) {
+ case CPU_UP_PREPARE:
+ case CPU_DOWN_PREPARE:
+ cpuidle_coupled_prevent_idle(dev->coupled);
+ break;
+ case CPU_ONLINE:
+ case CPU_DEAD:
+ cpuidle_coupled_update_online_cpus(dev->coupled);
+ /* Fall through */
+ case CPU_UP_CANCELED:
+ case CPU_DOWN_FAILED:
+ cpuidle_coupled_allow_idle(dev->coupled);
+ break;
+ }
+
+out:
+ mutex_unlock(&cpuidle_lock);
+ return NOTIFY_OK;
+}
+
+static struct notifier_block cpuidle_coupled_cpu_notifier = {
+ .notifier_call = cpuidle_coupled_cpu_notify,
+};
+
+static int __init cpuidle_coupled_init(void)
+{
+ return register_cpu_notifier(&cpuidle_coupled_cpu_notifier);
+}
+core_initcall(cpuidle_coupled_init);
return -ENODEV;
}
+/**
+ * cpuidle_enter_state - enter the state and update stats
+ * @dev: cpuidle device for this cpu
+ * @drv: cpuidle driver for this cpu
+ * @next_state: index into drv->states of the state to enter
+ */
+int cpuidle_enter_state(struct cpuidle_device *dev, struct cpuidle_driver *drv,
+ int next_state)
+{
+ int entered_state;
+
+ entered_state = cpuidle_enter_ops(dev, drv, next_state);
+
+ if (entered_state >= 0) {
+ /* Update cpuidle counters */
+ /* This can be moved to within driver enter routine
+ * but that results in multiple copies of same code.
+ */
+ dev->states_usage[entered_state].time +=
+ (unsigned long long)dev->last_residency;
+ dev->states_usage[entered_state].usage++;
+ } else {
+ dev->last_residency = 0;
+ }
+
+ return entered_state;
+}
+
/**
* cpuidle_idle_call - the main idle loop
*
if (!dev || !dev->enabled)
return -EBUSY;
-#if 0
- /* shows regressions, re-enable for 2.6.29 */
- /*
- * run any timers that can be run now, at this point
- * before calculating the idle duration etc.
- */
- hrtimer_peek_ahead_timers();
-#endif
-
/* ask the governor for the next state */
next_state = cpuidle_curr_governor->select(drv, dev);
if (need_resched()) {
trace_power_start_rcuidle(POWER_CSTATE, next_state, dev->cpu);
trace_cpu_idle_rcuidle(next_state, dev->cpu);
- entered_state = cpuidle_enter_ops(dev, drv, next_state);
+ if (cpuidle_state_is_coupled(dev, drv, next_state))
+ entered_state = cpuidle_enter_state_coupled(dev, drv,
+ next_state);
+ else
+ entered_state = cpuidle_enter_state(dev, drv, next_state);
trace_power_end_rcuidle(dev->cpu);
trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, dev->cpu);
- if (entered_state >= 0) {
- /* Update cpuidle counters */
- /* This can be moved to within driver enter routine
- * but that results in multiple copies of same code.
- */
- dev->states_usage[entered_state].time +=
- (unsigned long long)dev->last_residency;
- dev->states_usage[entered_state].usage++;
- } else {
- dev->last_residency = 0;
- }
-
/* give the governor an opportunity to reflect on the outcome */
if (cpuidle_curr_governor->reflect)
cpuidle_curr_governor->reflect(dev, entered_state);
int ret, i;
struct cpuidle_driver *drv = cpuidle_get_driver();
+ if (!dev)
+ return -EINVAL;
+
if (dev->enabled)
return 0;
if (!drv || !cpuidle_curr_governor)
struct device *cpu_dev = get_cpu_device((unsigned long)dev->cpu);
struct cpuidle_driver *cpuidle_driver = cpuidle_get_driver();
- if (!dev)
- return -EINVAL;
if (!try_module_get(cpuidle_driver->owner))
return -EINVAL;
per_cpu(cpuidle_devices, dev->cpu) = dev;
list_add(&dev->device_list, &cpuidle_detected_devices);
- if ((ret = cpuidle_add_sysfs(cpu_dev))) {
- module_put(cpuidle_driver->owner);
- return ret;
- }
+ ret = cpuidle_add_sysfs(cpu_dev);
+ if (ret)
+ goto err_sysfs;
+
+ ret = cpuidle_coupled_register_device(dev);
+ if (ret)
+ goto err_coupled;
dev->registered = 1;
return 0;
+
+err_coupled:
+ cpuidle_remove_sysfs(cpu_dev);
+ wait_for_completion(&dev->kobj_unregister);
+err_sysfs:
+ list_del(&dev->device_list);
+ per_cpu(cpuidle_devices, dev->cpu) = NULL;
+ module_put(cpuidle_driver->owner);
+ return ret;
}
/**
{
int ret;
+ if (!dev)
+ return -EINVAL;
+
mutex_lock(&cpuidle_lock);
if ((ret = __cpuidle_register_device(dev))) {
wait_for_completion(&dev->kobj_unregister);
per_cpu(cpuidle_devices, dev->cpu) = NULL;
+ cpuidle_coupled_unregister_device(dev);
+
cpuidle_resume_and_unlock();
module_put(cpuidle_driver->owner);
extern struct mutex cpuidle_lock;
extern spinlock_t cpuidle_driver_lock;
extern int cpuidle_disabled(void);
+extern int cpuidle_enter_state(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv, int next_state);
/* idle loop */
extern void cpuidle_install_idle_handler(void);
extern int cpuidle_add_sysfs(struct device *dev);
extern void cpuidle_remove_sysfs(struct device *dev);
+#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
+bool cpuidle_state_is_coupled(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv, int state);
+int cpuidle_enter_state_coupled(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv, int next_state);
+int cpuidle_coupled_register_device(struct cpuidle_device *dev);
+void cpuidle_coupled_unregister_device(struct cpuidle_device *dev);
+#else
+static inline bool cpuidle_state_is_coupled(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv, int state)
+{
+ return false;
+}
+
+static inline int cpuidle_enter_state_coupled(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv, int next_state)
+{
+ return -1;
+}
+
+static inline int cpuidle_coupled_register_device(struct cpuidle_device *dev)
+{
+ return 0;
+}
+
+static inline void cpuidle_coupled_unregister_device(struct cpuidle_device *dev)
+{
+}
+#endif
+
#endif /* __DRIVER_CPUIDLE_H */
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver");
MODULE_AUTHOR("Haavard Skinnemoen (Atmel)");
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
init_completion(&sdmac->done);
- sdmac->buf_tail = 0;
-
return 0;
out:
sdmac->flags = 0;
+ sdmac->buf_tail = 0;
+
dev_dbg(sdma->dev, "setting up %d entries for channel %d.\n",
sg_len, channel);
sdmac->status = DMA_IN_PROGRESS;
+ sdmac->buf_tail = 0;
+
sdmac->flags |= IMX_DMA_SG_LOOP;
sdmac->direction = direction;
ret = sdma_load_context(sdmac);
struct pl330_reqcfg *cfg;
/* Pointer to first xfer in the request. */
struct pl330_xfer *x;
+ /* Hook to attach to DMAC's list of reqs with due callback */
+ struct list_head rqd;
};
/*
/* Number of bytes taken to setup MC for the req */
u32 mc_len;
struct pl330_req *r;
- /* Hook to attach to DMAC's list of reqs with due callback */
- struct list_head rqd;
};
/* ToBeDone for tasklet */
/* Returns 1 if state was updated, 0 otherwise */
static int pl330_update(const struct pl330_info *pi)
{
- struct _pl330_req *rqdone;
+ struct pl330_req *rqdone, *tmp;
struct pl330_dmac *pl330;
unsigned long flags;
void __iomem *regs;
if (active == -1) /* Aborted */
continue;
- rqdone = &thrd->req[active];
+ /* Detach the req */
+ rqdone = thrd->req[active].r;
+ thrd->req[active].r = NULL;
+
mark_free(thrd, active);
/* Get going again ASAP */
}
/* Now that we are in no hurry, do the callbacks */
- while (!list_empty(&pl330->req_done)) {
- struct pl330_req *r;
-
- rqdone = container_of(pl330->req_done.next,
- struct _pl330_req, rqd);
-
- list_del_init(&rqdone->rqd);
-
- /* Detach the req */
- r = rqdone->r;
- rqdone->r = NULL;
+ list_for_each_entry_safe(rqdone, tmp, &pl330->req_done, rqd) {
+ list_del(&rqdone->rqd);
spin_unlock_irqrestore(&pl330->lock, flags);
- _callback(r, PL330_ERR_NONE);
+ _callback(rqdone, PL330_ERR_NONE);
spin_lock_irqsave(&pl330->lock, flags);
}
/* Pick up ripe tomatoes */
list_for_each_entry_safe(desc, _dt, &pch->work_list, node)
if (desc->status == DONE) {
- if (pch->cyclic)
+ if (!pch->cyclic)
dma_cookie_complete(&desc->txd);
list_move_tail(&desc->node, &list);
}
}
/* Returns the number of descriptors added to the DMAC pool */
-int add_desc(struct dma_pl330_dmac *pdmac, gfp_t flg, int count)
+static int add_desc(struct dma_pl330_dmac *pdmac, gfp_t flg, int count)
{
struct dma_pl330_desc *desc;
unsigned long flags;
else
return (char *)ptr;
- r = size % align;
+ r = (unsigned long)p % align;
if (r == 0)
return (char *)ptr;
if (mce->bank != 8)
return NOTIFY_DONE;
-#ifdef CONFIG_SMP
- /* Only handle if it is the right mc controller */
- if (mce->socketid != pvt->i7core_dev->socket)
- return NOTIFY_DONE;
-#endif
-
smp_rmb();
if ((pvt->mce_out + 1) % MCE_LOG_LEN == pvt->mce_in) {
smp_wmb();
if (pvt->enable_scrub)
disable_sdram_scrub_setting(mci);
- mce_unregister_decode_chain(&i7_mce_dec);
-
/* Disable EDAC polling */
i7core_pci_ctl_release(pvt);
/* DCLK for scrub rate setting */
pvt->dclk_freq = get_dclk_freq();
- mce_register_decode_chain(&i7_mce_dec);
-
return 0;
fail0:
pci_rc = pci_register_driver(&i7core_driver);
- if (pci_rc >= 0)
+ if (pci_rc >= 0) {
+ mce_register_decode_chain(&i7_mce_dec);
return 0;
+ }
i7core_printk(KERN_ERR, "Failed to register device with error %d.\n",
pci_rc);
{
debugf2("MC: " __FILE__ ": %s()\n", __func__);
pci_unregister_driver(&i7core_driver);
+ mce_unregister_decode_chain(&i7_mce_dec);
}
module_init(i7core_init);
layers[1].type = EDAC_MC_LAYER_CHANNEL;
layers[1].size = 1;
layers[1].is_virt_csrow = false;
- mci = edac_mc_alloc(edac_mc_idx, ARRAY_SIZE(layers), sizeof(*pdata));
+ mci = edac_mc_alloc(edac_mc_idx, ARRAY_SIZE(layers), layers,
+ sizeof(*pdata));
if (!mci) {
devres_release_group(&op->dev, mpc85xx_mc_err_probe);
return -ENOMEM;
pvt->is_close_pg = false;
}
- pci_read_config_dword(pvt->pci_ta, RANK_CFG_A, ®);
+ pci_read_config_dword(pvt->pci_ddrio, RANK_CFG_A, ®);
if (IS_RDIMM_ENABLED(reg)) {
/* FIXME: Can also be LRDIMM */
debugf0("Memory is registered\n");
debugf0("MC: " __FILE__ ": %s(): mci = %p, dev = %p\n",
__func__, mci, &sbridge_dev->pdev[0]->dev);
- mce_unregister_decode_chain(&sbridge_mce_dec);
-
/* Remove MC sysfs nodes */
edac_mc_del_mc(mci->dev);
goto fail0;
}
- mce_register_decode_chain(&sbridge_mce_dec);
return 0;
fail0:
pci_rc = pci_register_driver(&sbridge_driver);
- if (pci_rc >= 0)
+ if (pci_rc >= 0) {
+ mce_register_decode_chain(&sbridge_mce_dec);
return 0;
+ }
sbridge_printk(KERN_ERR, "Failed to register device with error %d.\n",
pci_rc);
{
debugf2("MC: " __FILE__ ": %s()\n", __func__);
pci_unregister_driver(&sbridge_driver);
+ mce_unregister_decode_chain(&sbridge_mce_dec);
}
module_init(sbridge_init);
[5] = "Charge-downstream",
[6] = "MHL",
[7] = "Dock-desk",
- [7] = "Dock-card",
- [8] = "JIG",
+ [8] = "Dock-card",
+ [9] = "JIG",
NULL,
};
extcon_dev_unregister(info->edev);
+ kfree(info->edev);
kfree(info);
return 0;
#if defined(CONFIG_ANDROID)
if (switch_class)
ret = class_compat_create_link(switch_class, edev->dev,
- dev);
+ NULL);
#endif /* CONFIG_ANDROID */
spin_lock_init(&edev->lock);
if (ret < 0)
goto err_request_irq;
+ platform_set_drvdata(pdev, extcon_data);
/* Perform initial detection */
gpio_extcon_work(&extcon_data->work.work);
struct gpio_extcon_data *extcon_data = platform_get_drvdata(pdev);
cancel_delayed_work_sync(&extcon_data->work);
+ free_irq(extcon_data->irq, extcon_data);
gpio_free(extcon_data->gpio);
extcon_dev_unregister(&extcon_data->edev);
devm_kfree(&pdev->dev, extcon_data);
config GPIO_MSM_V1
tristate "Qualcomm MSM GPIO v1"
- depends on GPIOLIB && ARCH_MSM
+ depends on GPIOLIB && ARCH_MSM && (ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50)
help
Say yes here to support the GPIO interface on ARM v6 based
Qualcomm MSM chips. Most of the pins on the MSM can be
return 0;
}
+EXPORT_SYMBOL(devm_gpio_request_one);
/**
* devm_gpio_free - free an interrupt
writel(~0, port->base + GPIO_ISR);
if (mxc_gpio_hwtype == IMX21_GPIO) {
- /* setup one handler for all GPIO interrupts */
- if (pdev->id == 0)
- irq_set_chained_handler(port->irq,
- mx2_gpio_irq_handler);
+ /*
+ * Setup one handler for all GPIO interrupts. Actually setting
+ * the handler is needed only once, but doing it for every port
+ * is more robust and easier.
+ */
+ irq_set_chained_handler(port->irq, mx2_gpio_irq_handler);
} else {
/* setup one handler for each entry */
irq_set_chained_handler(port->irq, mx3_gpio_irq_handler);
if (bank->dbck_enable_mask && !bank->dbck_enabled) {
clk_enable(bank->dbck);
bank->dbck_enabled = true;
+
+ __raw_writel(bank->dbck_enable_mask,
+ bank->base + bank->regs->debounce_en);
}
}
static inline void _gpio_dbck_disable(struct gpio_bank *bank)
{
if (bank->dbck_enable_mask && bank->dbck_enabled) {
+ /*
+ * Disable debounce before cutting it's clock. If debounce is
+ * enabled but the clock is not, GPIO module seems to be unable
+ * to detect events and generate interrupts at least on OMAP3.
+ */
+ __raw_writel(0, bank->base + bank->regs->debounce_en);
+
clk_disable(bank->dbck);
bank->dbck_enabled = false;
}
bank->is_mpuio = pdata->is_mpuio;
bank->non_wakeup_gpios = pdata->non_wakeup_gpios;
bank->loses_context = pdata->loses_context;
- bank->get_context_loss_count = pdata->get_context_loss_count;
bank->regs = pdata->regs;
#ifdef CONFIG_OF_GPIO
bank->chip.of_node = of_node_get(node);
omap_gpio_chip_init(bank);
omap_gpio_show_rev(bank);
+ if (bank->loses_context)
+ bank->get_context_loss_count = pdata->get_context_loss_count;
+
pm_runtime_put(bank->dev);
list_add_tail(&bank->node, &omap_gpio_list);
}
/* need to set base address for gpc4 */
- exonys5_gpios_1[11].base = gpio_base1 + 0x2E0;
+ exynos5_gpios_1[11].base = gpio_base1 + 0x2E0;
/* need to set base address for gpx */
chip = &exynos5_gpios_1[21];
}
spin_lock_init(&chip->lock);
gsta_gpio_setup(chip);
- for (i = 0; i < GSTA_NR_GPIO; i++)
- gsta_set_config(chip, i, gpio_pdata->pinconfig[i]);
+ if (gpio_pdata)
+ for (i = 0; i < GSTA_NR_GPIO; i++)
+ gsta_set_config(chip, i, gpio_pdata->pinconfig[i]);
/* 384 was used in previous code: be compatible for other drivers */
err = irq_alloc_descs(-1, 384, GSTA_NR_GPIO, NUMA_NO_NODE);
tps65910_gpio->gpio_chip.set = tps65910_gpio_set;
tps65910_gpio->gpio_chip.get = tps65910_gpio_get;
tps65910_gpio->gpio_chip.dev = &pdev->dev;
+#ifdef CONFIG_OF_GPIO
+ tps65910_gpio->gpio_chip.of_node = tps65910->dev->of_node;
+#endif
if (pdata && pdata->gpio_base)
tps65910_gpio->gpio_chip.base = pdata->gpio_base;
else
struct wm8994_gpio *wm8994_gpio = to_wm8994_gpio(chip);
struct wm8994 *wm8994 = wm8994_gpio->wm8994;
+ if (value)
+ value = WM8994_GPN_LVL;
+
return wm8994_set_bits(wm8994, WM8994_GPIO_1 + offset,
- WM8994_GPN_DIR, 0);
+ WM8994_GPN_DIR | WM8994_GPN_LVL, value);
}
static void wm8994_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
drm_monitor_supports_rb(struct edid *edid)
{
if (edid->revision >= 4) {
- bool ret;
+ bool ret = false;
drm_for_each_detailed_block((u8 *)edid, is_rb, &ret);
return ret;
}
return true;
}
+static bool valid_inferred_mode(const struct drm_connector *connector,
+ const struct drm_display_mode *mode)
+{
+ struct drm_display_mode *m;
+ bool ok = false;
+
+ list_for_each_entry(m, &connector->probed_modes, head) {
+ if (mode->hdisplay == m->hdisplay &&
+ mode->vdisplay == m->vdisplay &&
+ drm_mode_vrefresh(mode) == drm_mode_vrefresh(m))
+ return false; /* duplicated */
+ if (mode->hdisplay <= m->hdisplay &&
+ mode->vdisplay <= m->vdisplay)
+ ok = true;
+ }
+ return ok;
+}
+
static int
drm_dmt_modes_for_range(struct drm_connector *connector, struct edid *edid,
struct detailed_timing *timing)
struct drm_device *dev = connector->dev;
for (i = 0; i < drm_num_dmt_modes; i++) {
- if (mode_in_range(drm_dmt_modes + i, edid, timing)) {
+ if (mode_in_range(drm_dmt_modes + i, edid, timing) &&
+ valid_inferred_mode(connector, drm_dmt_modes + i)) {
newmode = drm_mode_duplicate(dev, &drm_dmt_modes[i]);
if (newmode) {
drm_mode_probed_add(connector, newmode);
return modes;
fixup_mode_1366x768(newmode);
- if (!mode_in_range(newmode, edid, timing)) {
+ if (!mode_in_range(newmode, edid, timing) ||
+ !valid_inferred_mode(connector, newmode)) {
drm_mode_destroy(dev, newmode);
continue;
}
return modes;
fixup_mode_1366x768(newmode);
- if (!mode_in_range(newmode, edid, timing)) {
+ if (!mode_in_range(newmode, edid, timing) ||
+ !valid_inferred_mode(connector, newmode)) {
drm_mode_destroy(dev, newmode);
continue;
}
};
static struct drm_driver exynos_drm_driver = {
- .driver_features = DRIVER_HAVE_IRQ | DRIVER_BUS_PLATFORM |
- DRIVER_MODESET | DRIVER_GEM | DRIVER_PRIME,
+ .driver_features = DRIVER_HAVE_IRQ | DRIVER_MODESET |
+ DRIVER_GEM | DRIVER_PRIME,
.load = exynos_drm_load,
.unload = exynos_drm_unload,
.open = exynos_drm_open,
manager_ops->commit(manager->dev);
}
-static struct drm_crtc *
-exynos_drm_encoder_get_crtc(struct drm_encoder *encoder)
-{
- return encoder->crtc;
-}
-
static struct drm_encoder_helper_funcs exynos_encoder_helper_funcs = {
.dpms = exynos_drm_encoder_dpms,
.mode_fixup = exynos_drm_encoder_mode_fixup,
.mode_set = exynos_drm_encoder_mode_set,
.prepare = exynos_drm_encoder_prepare,
.commit = exynos_drm_encoder_commit,
- .get_crtc = exynos_drm_encoder_get_crtc,
};
static void exynos_drm_encoder_destroy(struct drm_encoder *encoder)
static void exynos_drm_fb_destroy(struct drm_framebuffer *fb)
{
struct exynos_drm_fb *exynos_fb = to_exynos_fb(fb);
+ unsigned int i;
DRM_DEBUG_KMS("%s\n", __FILE__);
drm_framebuffer_cleanup(fb);
+ for (i = 0; i < ARRAY_SIZE(exynos_fb->exynos_gem_obj); i++) {
+ struct drm_gem_object *obj;
+
+ if (exynos_fb->exynos_gem_obj[i] == NULL)
+ continue;
+
+ obj = &exynos_fb->exynos_gem_obj[i]->base;
+ drm_gem_object_unreference_unlocked(obj);
+ }
+
kfree(exynos_fb);
exynos_fb = NULL;
}
return ERR_PTR(-ENOENT);
}
- drm_gem_object_unreference_unlocked(obj);
-
fb = exynos_drm_framebuffer_init(dev, mode_cmd, obj);
- if (IS_ERR(fb))
+ if (IS_ERR(fb)) {
+ drm_gem_object_unreference_unlocked(obj);
return fb;
+ }
exynos_fb = to_exynos_fb(fb);
nr = exynos_drm_format_num_buffers(fb->pixel_format);
return ERR_PTR(-ENOENT);
}
- drm_gem_object_unreference_unlocked(obj);
-
exynos_fb->exynos_gem_obj[i] = to_exynos_gem_obj(obj);
}
static inline int exynos_drm_format_num_buffers(uint32_t format)
{
switch (format) {
- case DRM_FORMAT_NV12M:
+ case DRM_FORMAT_NV12:
case DRM_FORMAT_NV12MT:
return 2;
- case DRM_FORMAT_YUV420M:
+ case DRM_FORMAT_YUV420:
return 3;
default:
return 1;
struct drm_device *dev, uint32_t handle,
uint64_t *offset)
{
- struct exynos_drm_gem_obj *exynos_gem_obj;
struct drm_gem_object *obj;
int ret = 0;
goto unlock;
}
- exynos_gem_obj = to_exynos_gem_obj(obj);
-
- if (!exynos_gem_obj->base.map_list.map) {
- ret = drm_gem_create_mmap_offset(&exynos_gem_obj->base);
+ if (!obj->map_list.map) {
+ ret = drm_gem_create_mmap_offset(obj);
if (ret)
goto out;
}
- *offset = (u64)exynos_gem_obj->base.map_list.hash.key << PAGE_SHIFT;
+ *offset = (u64)obj->map_list.hash.key << PAGE_SHIFT;
DRM_DEBUG_KMS("offset = 0x%lx\n", (unsigned long)*offset);
out:
switch (win_data->pixel_format) {
case DRM_FORMAT_NV12MT:
tiled_mode = true;
- case DRM_FORMAT_NV12M:
+ case DRM_FORMAT_NV12:
crcb_mode = false;
buf_num = 2;
break;
mixer_reg_write(res, MXR_BG_COLOR2, 0x008080);
/* setting graphical layers */
-
val = MXR_GRP_CFG_COLOR_KEY_DISABLE; /* no blank key */
val |= MXR_GRP_CFG_WIN_BLEND_EN;
+ val |= MXR_GRP_CFG_BLEND_PRE_MUL;
+ val |= MXR_GRP_CFG_PIXEL_BLEND_EN;
val |= MXR_GRP_CFG_ALPHA_VAL(0xff); /* non-transparent alpha */
/* the same configuration for both layers */
mixer_reg_write(res, MXR_GRAPHIC_CFG(0), val);
-
- val |= MXR_GRP_CFG_BLEND_PRE_MUL;
- val |= MXR_GRP_CFG_PIXEL_BLEND_EN;
mixer_reg_write(res, MXR_GRAPHIC_CFG(1), val);
+ /* setting video layers */
+ val = MXR_GRP_CFG_ALPHA_VAL(0);
+ mixer_reg_write(res, MXR_VIDEO_CFG, val);
+
/* configuration of Video Processor Registers */
vp_win_reset(ctx);
vp_default_filter(res);
return REG_READ(BLC_PWM_CTL2) & PWM_LEGACY_MODE;
}
-static int cdv_get_brightness(struct backlight_device *bd)
-{
- struct drm_device *dev = bl_get_data(bd);
- u32 val = REG_READ(BLC_PWM_CTL) & BACKLIGHT_DUTY_CYCLE_MASK;
-
- if (cdv_backlight_combination_mode(dev)) {
- u8 lbpc;
-
- val &= ~1;
- pci_read_config_byte(dev->pdev, 0xF4, &lbpc);
- val *= lbpc;
- }
- return val;
-}
-
static u32 cdv_get_max_backlight(struct drm_device *dev)
{
u32 max = REG_READ(BLC_PWM_CTL);
return max;
}
+static int cdv_get_brightness(struct backlight_device *bd)
+{
+ struct drm_device *dev = bl_get_data(bd);
+ u32 val = REG_READ(BLC_PWM_CTL) & BACKLIGHT_DUTY_CYCLE_MASK;
+
+ if (cdv_backlight_combination_mode(dev)) {
+ u8 lbpc;
+
+ val &= ~1;
+ pci_read_config_byte(dev->pdev, 0xF4, &lbpc);
+ val *= lbpc;
+ }
+ return (val * 100)/cdv_get_max_backlight(dev);
+
+}
+
static int cdv_set_brightness(struct backlight_device *bd)
{
struct drm_device *dev = bl_get_data(bd);
if (level < 1)
level = 1;
+ level *= cdv_get_max_backlight(dev);
+ level /= 100;
+
if (cdv_backlight_combination_mode(dev)) {
u32 max = cdv_get_max_backlight(dev);
u8 lbpc;
cdv_backlight_device->props.brightness =
cdv_get_brightness(cdv_backlight_device);
- cdv_backlight_device->props.max_brightness = cdv_get_max_backlight(dev);
backlight_update_status(cdv_backlight_device);
dev_priv->backlight_device = cdv_backlight_device;
return 0;
#define ASLE_CBLV_VALID (1<<31)
+static struct psb_intel_opregion *system_opregion;
+
static u32 asle_set_backlight(struct drm_device *dev, u32 bclp)
{
struct drm_psb_private *dev_priv = dev->dev_private;
struct drm_psb_private *dev_priv = dev->dev_private;
struct opregion_asle *asle = dev_priv->opregion.asle;
- if (asle) {
+ if (asle && system_opregion ) {
/* Don't do this on Medfield or other non PC like devices, they
use the bit for something different altogether */
psb_enable_pipestat(dev_priv, 0, PIPE_LEGACY_BLC_EVENT_ENABLE);
#define ACPI_EV_LID (1<<1)
#define ACPI_EV_DOCK (1<<2)
-static struct psb_intel_opregion *system_opregion;
static int psb_intel_opregion_video_event(struct notifier_block *nb,
unsigned long val, void *data)
system_opregion = opregion;
register_acpi_notifier(&psb_intel_opregion_notifier);
}
-
- if (opregion->asle)
- psb_intel_opregion_enable_asle(dev);
}
void psb_intel_opregion_fini(struct drm_device *dev)
extern void psb_intel_opregion_init(struct drm_device *dev);
extern void psb_intel_opregion_fini(struct drm_device *dev);
extern int psb_intel_opregion_setup(struct drm_device *dev);
+extern void psb_intel_opregion_enable_asle(struct drm_device *dev);
#else
{
return 0;
}
+
+extern inline void psb_intel_opregion_enable_asle(struct drm_device *dev)
+{
+}
#endif
psb_backlight_device->props.max_brightness = 100;
backlight_update_status(psb_backlight_device);
dev_priv->backlight_device = psb_backlight_device;
+
+ /* This must occur after the backlight is properly initialised */
+ psb_lid_timer_init(dev_priv);
+
return 0;
}
return 0;
}
-/* Not exactly an erratum more an irritation */
-static void psb_chip_errata(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- psb_lid_timer_init(dev_priv);
-}
-
static void psb_chip_teardown(struct drm_device *dev)
{
struct drm_psb_private *dev_priv = dev->dev_private;
.sgx_offset = PSB_SGX_OFFSET,
.chip_setup = psb_chip_setup,
.chip_teardown = psb_chip_teardown,
- .errata = psb_chip_errata,
.crtc_helper = &psb_intel_helper_funcs,
.crtc_funcs = &psb_intel_crtc_funcs,
if (ret)
return ret;
+ psb_intel_opregion_enable_asle(dev);
#if 0
/*enable runtime pm at last*/
pm_runtime_enable(&dev->pdev->dev);
}
}
+static void i915_kick_out_firmware_fb(struct drm_i915_private *dev_priv)
+{
+ struct apertures_struct *ap;
+ struct pci_dev *pdev = dev_priv->dev->pdev;
+ bool primary;
+
+ ap = alloc_apertures(1);
+ if (!ap)
+ return;
+
+ ap->ranges[0].base = dev_priv->dev->agp->base;
+ ap->ranges[0].size =
+ dev_priv->mm.gtt->gtt_mappable_entries << PAGE_SHIFT;
+ primary =
+ pdev->resource[PCI_ROM_RESOURCE].flags & IORESOURCE_ROM_SHADOW;
+
+ remove_conflicting_framebuffers(ap, "inteldrmfb", primary);
+
+ kfree(ap);
+}
+
/**
* i915_driver_load - setup chip and create an initial config
* @dev: DRM device
goto free_priv;
}
+ dev_priv->mm.gtt = intel_gtt_get();
+ if (!dev_priv->mm.gtt) {
+ DRM_ERROR("Failed to initialize GTT\n");
+ ret = -ENODEV;
+ goto put_bridge;
+ }
+
+ i915_kick_out_firmware_fb(dev_priv);
+
pci_set_master(dev->pdev);
/* overlay on gen2 is broken and can't address above 1G */
goto put_bridge;
}
- dev_priv->mm.gtt = intel_gtt_get();
- if (!dev_priv->mm.gtt) {
- DRM_ERROR("Failed to initialize GTT\n");
- ret = -ENODEV;
- goto out_rmmap;
- }
-
aperture_size = dev_priv->mm.gtt->gtt_mappable_entries << PAGE_SHIFT;
dev_priv->mm.gtt_mapping =
.has_blt_ring = 1,
.has_llc = 1,
.has_pch_split = 1,
+ .has_force_wake = 1,
};
static const struct intel_device_info intel_sandybridge_m_info = {
.has_blt_ring = 1,
.has_llc = 1,
.has_pch_split = 1,
+ .has_force_wake = 1,
};
static const struct intel_device_info intel_ivybridge_d_info = {
.has_blt_ring = 1,
.has_llc = 1,
.has_pch_split = 1,
+ .has_force_wake = 1,
};
static const struct intel_device_info intel_ivybridge_m_info = {
.has_blt_ring = 1,
.has_llc = 1,
.has_pch_split = 1,
+ .has_force_wake = 1,
};
static const struct intel_device_info intel_valleyview_m_info = {
.has_blt_ring = 1,
.has_llc = 1,
.has_pch_split = 1,
+ .has_force_wake = 1,
};
static const struct intel_device_info intel_haswell_m_info = {
.has_blt_ring = 1,
.has_llc = 1,
.has_pch_split = 1,
+ .has_force_wake = 1,
};
static const struct pci_device_id pciidlist[] = { /* aka */
/* We give fast paths for the really cool registers */
#define NEEDS_FORCE_WAKE(dev_priv, reg) \
- (((dev_priv)->info->gen >= 6) && \
- ((reg) < 0x40000) && \
- ((reg) != FORCEWAKE)) && \
- (!IS_VALLEYVIEW((dev_priv)->dev))
+ ((HAS_FORCE_WAKE((dev_priv)->dev)) && \
+ ((reg) < 0x40000) && \
+ ((reg) != FORCEWAKE))
#define __i915_read(x, y) \
u##x i915_read##x(struct drm_i915_private *dev_priv, u32 reg) { \
u8 is_ivybridge:1;
u8 is_valleyview:1;
u8 has_pch_split:1;
+ u8 has_force_wake:1;
u8 is_haswell:1;
u8 has_fbc:1;
u8 has_pipe_cxsr:1;
#define HAS_PCH_CPT(dev) (INTEL_PCH_TYPE(dev) == PCH_CPT)
#define HAS_PCH_IBX(dev) (INTEL_PCH_TYPE(dev) == PCH_IBX)
+#define HAS_FORCE_WAKE(dev) (INTEL_INFO(dev)->has_force_wake)
+
#include "i915_trace.h"
/**
*/
spin_lock_irqsave(&dev_priv->rps_lock, flags);
- WARN(dev_priv->pm_iir & pm_iir, "Missed a PM interrupt\n");
dev_priv->pm_iir |= pm_iir;
I915_WRITE(GEN6_PMIMR, dev_priv->pm_iir);
POSTING_READ(GEN6_PMIMR);
return ret;
}
-static void pch_irq_handler(struct drm_device *dev, u32 pch_iir)
+static void ibx_irq_handler(struct drm_device *dev, u32 pch_iir)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int pipe;
DRM_DEBUG_DRIVER("PCH transcoder A underrun interrupt\n");
}
+static void cpt_irq_handler(struct drm_device *dev, u32 pch_iir)
+{
+ drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ int pipe;
+
+ if (pch_iir & SDE_AUDIO_POWER_MASK_CPT)
+ DRM_DEBUG_DRIVER("PCH audio power change on port %d\n",
+ (pch_iir & SDE_AUDIO_POWER_MASK_CPT) >>
+ SDE_AUDIO_POWER_SHIFT_CPT);
+
+ if (pch_iir & SDE_AUX_MASK_CPT)
+ DRM_DEBUG_DRIVER("AUX channel interrupt\n");
+
+ if (pch_iir & SDE_GMBUS_CPT)
+ DRM_DEBUG_DRIVER("PCH GMBUS interrupt\n");
+
+ if (pch_iir & SDE_AUDIO_CP_REQ_CPT)
+ DRM_DEBUG_DRIVER("Audio CP request interrupt\n");
+
+ if (pch_iir & SDE_AUDIO_CP_CHG_CPT)
+ DRM_DEBUG_DRIVER("Audio CP change interrupt\n");
+
+ if (pch_iir & SDE_FDI_MASK_CPT)
+ for_each_pipe(pipe)
+ DRM_DEBUG_DRIVER(" pipe %c FDI IIR: 0x%08x\n",
+ pipe_name(pipe),
+ I915_READ(FDI_RX_IIR(pipe)));
+}
+
static irqreturn_t ivybridge_irq_handler(DRM_IRQ_ARGS)
{
struct drm_device *dev = (struct drm_device *) arg;
if (pch_iir & SDE_HOTPLUG_MASK_CPT)
queue_work(dev_priv->wq, &dev_priv->hotplug_work);
- pch_irq_handler(dev, pch_iir);
+ cpt_irq_handler(dev, pch_iir);
/* clear PCH hotplug event before clear CPU irq */
I915_WRITE(SDEIIR, pch_iir);
if (de_iir & DE_PCH_EVENT) {
if (pch_iir & hotplug_mask)
queue_work(dev_priv->wq, &dev_priv->hotplug_work);
- pch_irq_handler(dev, pch_iir);
+ if (HAS_PCH_CPT(dev))
+ cpt_irq_handler(dev, pch_iir);
+ else
+ ibx_irq_handler(dev, pch_iir);
}
if (de_iir & DE_PCU_EVENT) {
#define MI_DISPLAY_FLIP MI_INSTR(0x14, 2)
#define MI_DISPLAY_FLIP_I915 MI_INSTR(0x14, 1)
#define MI_DISPLAY_FLIP_PLANE(n) ((n) << 20)
+/* IVB has funny definitions for which plane to flip. */
+#define MI_DISPLAY_FLIP_IVB_PLANE_A (0 << 19)
+#define MI_DISPLAY_FLIP_IVB_PLANE_B (1 << 19)
+#define MI_DISPLAY_FLIP_IVB_SPRITE_A (2 << 19)
+#define MI_DISPLAY_FLIP_IVB_SPRITE_B (3 << 19)
+#define MI_DISPLAY_FLIP_IVB_PLANE_C (4 << 19)
+#define MI_DISPLAY_FLIP_IVB_SPRITE_C (5 << 19)
+
#define MI_SET_CONTEXT MI_INSTR(0x18, 0)
#define MI_MM_SPACE_GTT (1<<8)
#define MI_MM_SPACE_PHYSICAL (0<<8)
/* PCH */
-/* south display engine interrupt */
+/* south display engine interrupt: IBX */
#define SDE_AUDIO_POWER_D (1 << 27)
#define SDE_AUDIO_POWER_C (1 << 26)
#define SDE_AUDIO_POWER_B (1 << 25)
#define SDE_TRANSA_CRC_ERR (1 << 1)
#define SDE_TRANSA_FIFO_UNDER (1 << 0)
#define SDE_TRANS_MASK (0x3f)
-/* CPT */
-#define SDE_CRT_HOTPLUG_CPT (1 << 19)
+
+/* south display engine interrupt: CPT/PPT */
+#define SDE_AUDIO_POWER_D_CPT (1 << 31)
+#define SDE_AUDIO_POWER_C_CPT (1 << 30)
+#define SDE_AUDIO_POWER_B_CPT (1 << 29)
+#define SDE_AUDIO_POWER_SHIFT_CPT 29
+#define SDE_AUDIO_POWER_MASK_CPT (7 << 29)
+#define SDE_AUXD_CPT (1 << 27)
+#define SDE_AUXC_CPT (1 << 26)
+#define SDE_AUXB_CPT (1 << 25)
+#define SDE_AUX_MASK_CPT (7 << 25)
#define SDE_PORTD_HOTPLUG_CPT (1 << 23)
#define SDE_PORTC_HOTPLUG_CPT (1 << 22)
#define SDE_PORTB_HOTPLUG_CPT (1 << 21)
+#define SDE_CRT_HOTPLUG_CPT (1 << 19)
#define SDE_HOTPLUG_MASK_CPT (SDE_CRT_HOTPLUG_CPT | \
SDE_PORTD_HOTPLUG_CPT | \
SDE_PORTC_HOTPLUG_CPT | \
SDE_PORTB_HOTPLUG_CPT)
+#define SDE_GMBUS_CPT (1 << 17)
+#define SDE_AUDIO_CP_REQ_C_CPT (1 << 10)
+#define SDE_AUDIO_CP_CHG_C_CPT (1 << 9)
+#define SDE_FDI_RXC_CPT (1 << 8)
+#define SDE_AUDIO_CP_REQ_B_CPT (1 << 6)
+#define SDE_AUDIO_CP_CHG_B_CPT (1 << 5)
+#define SDE_FDI_RXB_CPT (1 << 4)
+#define SDE_AUDIO_CP_REQ_A_CPT (1 << 2)
+#define SDE_AUDIO_CP_CHG_A_CPT (1 << 1)
+#define SDE_FDI_RXA_CPT (1 << 0)
+#define SDE_AUDIO_CP_REQ_CPT (SDE_AUDIO_CP_REQ_C_CPT | \
+ SDE_AUDIO_CP_REQ_B_CPT | \
+ SDE_AUDIO_CP_REQ_A_CPT)
+#define SDE_AUDIO_CP_CHG_CPT (SDE_AUDIO_CP_CHG_C_CPT | \
+ SDE_AUDIO_CP_CHG_B_CPT | \
+ SDE_AUDIO_CP_CHG_A_CPT)
+#define SDE_FDI_MASK_CPT (SDE_FDI_RXC_CPT | \
+ SDE_FDI_RXB_CPT | \
+ SDE_FDI_RXA_CPT)
#define SDEISR 0xc4000
#define SDEIMR 0xc4004
if (HAS_PCH_SPLIT(dev)) {
I915_WRITE(BLC_PWM_PCH_CTL1, dev_priv->saveBLC_PWM_CTL);
I915_WRITE(BLC_PWM_PCH_CTL2, dev_priv->saveBLC_PWM_CTL2);
- I915_WRITE(BLC_PWM_CPU_CTL, dev_priv->saveBLC_CPU_PWM_CTL);
+ /* NOTE: BLC_PWM_CPU_CTL must be written after BLC_PWM_CPU_CTL2;
+ * otherwise we get blank eDP screen after S3 on some machines
+ */
I915_WRITE(BLC_PWM_CPU_CTL2, dev_priv->saveBLC_CPU_PWM_CTL2);
+ I915_WRITE(BLC_PWM_CPU_CTL, dev_priv->saveBLC_CPU_PWM_CTL);
I915_WRITE(PCH_PP_ON_DELAYS, dev_priv->savePP_ON_DELAYS);
I915_WRITE(PCH_PP_OFF_DELAYS, dev_priv->savePP_OFF_DELAYS);
I915_WRITE(PCH_PP_DIVISOR, dev_priv->savePP_DIVISOR);
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_ring_buffer *ring = &dev_priv->ring[BCS];
+ uint32_t plane_bit = 0;
int ret;
ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
if (ret)
goto err;
+ switch(intel_crtc->plane) {
+ case PLANE_A:
+ plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_A;
+ break;
+ case PLANE_B:
+ plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_B;
+ break;
+ case PLANE_C:
+ plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_C;
+ break;
+ default:
+ WARN_ONCE(1, "unknown plane in flip command\n");
+ ret = -ENODEV;
+ goto err;
+ }
+
ret = intel_ring_begin(ring, 4);
if (ret)
goto err_unpin;
- intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | (intel_crtc->plane << 19));
+ intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | plane_bit);
intel_ring_emit(ring, (fb->pitches[0] | obj->tiling_mode));
intel_ring_emit(ring, (obj->gtt_offset));
intel_ring_emit(ring, (MI_NOOP));
if (I915_READ(HDMIC) & PORT_DETECTED)
intel_hdmi_init(dev, HDMIC);
- if (I915_READ(HDMID) & PORT_DETECTED)
+ if (!dpd_is_edp && I915_READ(HDMID) & PORT_DETECTED)
intel_hdmi_init(dev, HDMID);
if (I915_READ(PCH_DP_C) & DP_DETECTED)
POSTING_READ(vga_reg);
}
-static void ivb_pch_pwm_override(struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
-
- /*
- * IVB has CPU eDP backlight regs too, set things up to let the
- * PCH regs control the backlight
- */
- I915_WRITE(BLC_PWM_CPU_CTL2, PWM_ENABLE);
- I915_WRITE(BLC_PWM_CPU_CTL, 0);
- I915_WRITE(BLC_PWM_PCH_CTL1, PWM_ENABLE | (1<<30));
-}
-
void intel_modeset_init_hw(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
gen6_enable_rps(dev_priv);
gen6_update_ring_freq(dev_priv);
}
-
- if (IS_IVYBRIDGE(dev))
- ivb_pch_pwm_override(dev);
}
void intel_modeset_init(struct drm_device *dev)
#include "drm.h"
#include "drm_crtc.h"
#include "drm_crtc_helper.h"
+#include "drm_edid.h"
#include "intel_drv.h"
#include "i915_drm.h"
#include "i915_drv.h"
struct drm_display_mode *panel_fixed_mode; /* for eDP */
struct delayed_work panel_vdd_work;
bool want_panel_vdd;
+ struct edid *edid; /* cached EDID for eDP */
+ int edid_mode_count;
};
/**
int recv_bytes;
uint32_t status;
uint32_t aux_clock_divider;
- int try, precharge = 5;
+ int try, precharge;
intel_dp_check_edp(intel_dp);
/* The clock divider is based off the hrawclk,
else
aux_clock_divider = intel_hrawclk(dev) / 2;
+ if (IS_GEN6(dev))
+ precharge = 3;
+ else
+ precharge = 5;
+
/* Try to wait for any previous AUX channel activity */
for (try = 0; try < 3; try++) {
status = I915_READ(ch_ctl);
if (!(intel_dp->dpcd[DP_DOWN_STREAM_PORT_COUNT] & DP_OUI_SUPPORT))
return;
+ ironlake_edp_panel_vdd_on(intel_dp);
+
if (intel_dp_aux_native_read_retry(intel_dp, DP_SINK_OUI, buf, 3))
DRM_DEBUG_KMS("Sink OUI: %02hx%02hx%02hx\n",
buf[0], buf[1], buf[2]);
if (intel_dp_aux_native_read_retry(intel_dp, DP_BRANCH_OUI, buf, 3))
DRM_DEBUG_KMS("Branch OUI: %02hx%02hx%02hx\n",
buf[0], buf[1], buf[2]);
+
+ ironlake_edp_panel_vdd_off(intel_dp, false);
}
static bool
{
struct intel_dp *intel_dp = intel_attached_dp(connector);
struct edid *edid;
+ int size;
+
+ if (is_edp(intel_dp)) {
+ if (!intel_dp->edid)
+ return NULL;
+
+ size = (intel_dp->edid->extensions + 1) * EDID_LENGTH;
+ edid = kmalloc(size, GFP_KERNEL);
+ if (!edid)
+ return NULL;
+
+ memcpy(edid, intel_dp->edid, size);
+ return edid;
+ }
- ironlake_edp_panel_vdd_on(intel_dp);
edid = drm_get_edid(connector, adapter);
- ironlake_edp_panel_vdd_off(intel_dp, false);
return edid;
}
struct intel_dp *intel_dp = intel_attached_dp(connector);
int ret;
- ironlake_edp_panel_vdd_on(intel_dp);
+ if (is_edp(intel_dp)) {
+ drm_mode_connector_update_edid_property(connector,
+ intel_dp->edid);
+ ret = drm_add_edid_modes(connector, intel_dp->edid);
+ drm_edid_to_eld(connector,
+ intel_dp->edid);
+ connector->display_info.raw_edid = NULL;
+ return intel_dp->edid_mode_count;
+ }
+
ret = intel_ddc_get_modes(connector, adapter);
- ironlake_edp_panel_vdd_off(intel_dp, false);
return ret;
}
i2c_del_adapter(&intel_dp->adapter);
drm_encoder_cleanup(encoder);
if (is_edp(intel_dp)) {
+ kfree(intel_dp->edid);
cancel_delayed_work_sync(&intel_dp->panel_vdd_work);
ironlake_panel_vdd_off_sync(intel_dp);
}
break;
}
+ intel_dp_i2c_init(intel_dp, intel_connector, name);
+
/* Cache some DPCD data in the eDP case */
if (is_edp(intel_dp)) {
bool ret;
struct edp_power_seq cur, vbt;
u32 pp_on, pp_off, pp_div;
+ struct edid *edid;
pp_on = I915_READ(PCH_PP_ON_DELAYS);
pp_off = I915_READ(PCH_PP_OFF_DELAYS);
intel_dp_destroy(&intel_connector->base);
return;
}
- }
- intel_dp_i2c_init(intel_dp, intel_connector, name);
+ ironlake_edp_panel_vdd_on(intel_dp);
+ edid = drm_get_edid(connector, &intel_dp->adapter);
+ if (edid) {
+ drm_mode_connector_update_edid_property(connector,
+ edid);
+ intel_dp->edid_mode_count =
+ drm_add_edid_modes(connector, edid);
+ drm_edid_to_eld(connector, edid);
+ intel_dp->edid = edid;
+ }
+ ironlake_edp_panel_vdd_off(intel_dp, false);
+ }
intel_encoder->hot_plug = intel_dp_hot_plug;
static int init_ring_common(struct intel_ring_buffer *ring)
{
- drm_i915_private_t *dev_priv = ring->dev->dev_private;
+ struct drm_device *dev = ring->dev;
+ drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_gem_object *obj = ring->obj;
+ int ret = 0;
u32 head;
+ if (HAS_FORCE_WAKE(dev))
+ gen6_gt_force_wake_get(dev_priv);
+
/* Stop the ring if it's running. */
I915_WRITE_CTL(ring, 0);
I915_WRITE_HEAD(ring, 0);
I915_READ_HEAD(ring),
I915_READ_TAIL(ring),
I915_READ_START(ring));
- return -EIO;
+ ret = -EIO;
+ goto out;
}
if (!drm_core_check_feature(ring->dev, DRIVER_MODESET))
ring->head = I915_READ_HEAD(ring);
ring->tail = I915_READ_TAIL(ring) & TAIL_ADDR;
ring->space = ring_space(ring);
+ ring->last_retired_head = -1;
}
- return 0;
+out:
+ if (HAS_FORCE_WAKE(dev))
+ gen6_gt_force_wake_put(dev_priv);
+
+ return ret;
}
static int
if (ret)
goto err_unref;
+ ret = i915_gem_object_set_to_gtt_domain(obj, true);
+ if (ret)
+ goto err_unpin;
+
ring->virtual_start = ioremap_wc(dev->agp->base + obj->gtt_offset,
ring->size);
if (ring->virtual_start == NULL) {
nfbdev->helper.funcs = &nouveau_fbcon_helper_funcs;
ret = drm_fb_helper_init(dev, &nfbdev->helper,
- nv_two_heads(dev) ? 2 : 1, 4);
+ dev->mode_config.num_crtc, 4);
if (ret) {
kfree(nfbdev);
return ret;
+/*
+ * Copyright 2011 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ */
#include "drmP.h"
#include "drm.h"
}
if (tiling_flags & RADEON_TILING_MACRO) {
- if (rdev->family >= CHIP_CAYMAN)
+ if (rdev->family >= CHIP_TAHITI)
+ tmp = rdev->config.si.tile_config;
+ else if (rdev->family >= CHIP_CAYMAN)
tmp = rdev->config.cayman.tile_config;
else
tmp = rdev->config.evergreen.tile_config;
} else if (tiling_flags & RADEON_TILING_MICRO)
fb_format |= EVERGREEN_GRPH_ARRAY_MODE(EVERGREEN_GRPH_ARRAY_1D_TILED_THIN1);
+ if ((rdev->family == CHIP_TAHITI) ||
+ (rdev->family == CHIP_PITCAIRN))
+ fb_format |= SI_GRPH_PIPE_CONFIG(SI_ADDR_SURF_P8_32x32_8x16);
+ else if (rdev->family == CHIP_VERDE)
+ fb_format |= SI_GRPH_PIPE_CONFIG(SI_ADDR_SURF_P4_8x16);
+
switch (radeon_crtc->crtc_id) {
case 0:
WREG32(AVIVO_D1VGA_CONTROL, 0);
if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_HDMI) {
r600_hdmi_enable(encoder);
- if (ASIC_IS_DCE4(rdev))
+ if (ASIC_IS_DCE6(rdev))
+ ; /* TODO (use pointers instead of if-s?) */
+ else if (ASIC_IS_DCE4(rdev))
evergreen_hdmi_setmode(encoder, adjusted_mode);
else
r600_hdmi_setmode(encoder, adjusted_mode);
smx_dc_ctl0 |= NUMBER_OF_SETS(rdev->config.evergreen.sx_num_of_sets);
WREG32(SMX_DC_CTL0, smx_dc_ctl0);
+ if (rdev->family <= CHIP_SUMO2)
+ WREG32(SMX_SAR_CTL0, 0x00010000);
+
WREG32(SX_EXPORT_BUFFER_SIZES, (COLOR_BUFFER_SIZE((rdev->config.evergreen.sx_max_export_size / 4) - 1) |
POSITION_BUFFER_SIZE((rdev->config.evergreen.sx_max_export_pos_size / 4) - 1) |
SMX_BUFFER_SIZE((rdev->config.evergreen.sx_max_export_smx_size / 4) - 1)));
u32 cb_color_view[12];
u32 cb_color_pitch[12];
u32 cb_color_slice[12];
+ u32 cb_color_slice_idx[12];
u32 cb_color_attrib[12];
u32 cb_color_cmask_slice[8];/* unused */
u32 cb_color_fmask_slice[8];/* unused */
track->cb_color_info[i] = 0;
track->cb_color_view[i] = 0xFFFFFFFF;
track->cb_color_pitch[i] = 0;
- track->cb_color_slice[i] = 0;
+ track->cb_color_slice[i] = 0xfffffff;
+ track->cb_color_slice_idx[i] = 0;
}
track->cb_target_mask = 0xFFFFFFFF;
track->cb_shader_mask = 0xFFFFFFFF;
track->cb_dirty = true;
+ track->db_depth_slice = 0xffffffff;
track->db_depth_view = 0xFFFFC000;
track->db_depth_size = 0xFFFFFFFF;
track->db_depth_control = 0xFFFFFFFF;
{
struct evergreen_cs_track *track = p->track;
unsigned palign, halign, tileb, slice_pt;
+ unsigned mtile_pr, mtile_ps, mtileb;
tileb = 64 * surf->bpe * surf->nsamples;
- palign = track->group_size / (8 * surf->bpe * surf->nsamples);
- palign = MAX(8, palign);
slice_pt = 1;
if (tileb > surf->tsplit) {
slice_pt = tileb / surf->tsplit;
/* macro tile width & height */
palign = (8 * surf->bankw * track->npipes) * surf->mtilea;
halign = (8 * surf->bankh * surf->nbanks) / surf->mtilea;
- surf->layer_size = surf->nbx * surf->nby * surf->bpe * slice_pt;
+ mtileb = (palign / 8) * (halign / 8) * tileb;;
+ mtile_pr = surf->nbx / palign;
+ mtile_ps = (mtile_pr * surf->nby) / halign;
+ surf->layer_size = mtile_ps * mtileb * slice_pt;
surf->base_align = (palign / 8) * (halign / 8) * tileb;
surf->palign = palign;
surf->halign = halign;
offset += surf.layer_size * mslice;
if (offset > radeon_bo_size(track->cb_color_bo[id])) {
+ /* old ddx are broken they allocate bo with w*h*bpp but
+ * program slice with ALIGN(h, 8), catch this and patch
+ * command stream.
+ */
+ if (!surf.mode) {
+ volatile u32 *ib = p->ib.ptr;
+ unsigned long tmp, nby, bsize, size, min = 0;
+
+ /* find the height the ddx wants */
+ if (surf.nby > 8) {
+ min = surf.nby - 8;
+ }
+ bsize = radeon_bo_size(track->cb_color_bo[id]);
+ tmp = track->cb_color_bo_offset[id] << 8;
+ for (nby = surf.nby; nby > min; nby--) {
+ size = nby * surf.nbx * surf.bpe * surf.nsamples;
+ if ((tmp + size * mslice) <= bsize) {
+ break;
+ }
+ }
+ if (nby > min) {
+ surf.nby = nby;
+ slice = ((nby * surf.nbx) / 64) - 1;
+ if (!evergreen_surface_check(p, &surf, "cb")) {
+ /* check if this one works */
+ tmp += surf.layer_size * mslice;
+ if (tmp <= bsize) {
+ ib[track->cb_color_slice_idx[id]] = slice;
+ goto old_ddx_ok;
+ }
+ }
+ }
+ }
dev_warn(p->dev, "%s:%d cb[%d] bo too small (layer size %d, "
"offset %d, max layer %d, bo size %ld, slice %d)\n",
__func__, __LINE__, id, surf.layer_size,
surf.tsplit, surf.mtilea);
return -EINVAL;
}
+old_ddx_ok:
return 0;
}
case CB_COLOR7_SLICE:
tmp = (reg - CB_COLOR0_SLICE) / 0x3c;
track->cb_color_slice[tmp] = radeon_get_ib_value(p, idx);
+ track->cb_color_slice_idx[tmp] = idx;
track->cb_dirty = true;
break;
case CB_COLOR8_SLICE:
case CB_COLOR11_SLICE:
tmp = ((reg - CB_COLOR8_SLICE) / 0x1c) + 8;
track->cb_color_slice[tmp] = radeon_get_ib_value(p, idx);
+ track->cb_color_slice_idx[tmp] = idx;
track->cb_dirty = true;
break;
case CB_COLOR0_ATTRIB:
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
uint32_t offset;
- if (ASIC_IS_DCE5(rdev))
- return;
-
/* Silent, r600_hdmi_enable will raise WARN for us */
if (!dig->afmt->enabled)
return;
#define SCRATCH_UMSK 0x8540
#define SCRATCH_ADDR 0x8544
+#define SMX_SAR_CTL0 0xA008
#define SMX_DC_CTL0 0xA020
#define USE_HASH_FUNCTION (1 << 0)
#define NUMBER_OF_SETS(x) ((x) << 1)
rdev->config.cayman.max_pipes_per_simd = 4;
rdev->config.cayman.max_tile_pipes = 2;
if ((rdev->pdev->device == 0x9900) ||
- (rdev->pdev->device == 0x9901)) {
+ (rdev->pdev->device == 0x9901) ||
+ (rdev->pdev->device == 0x9905) ||
+ (rdev->pdev->device == 0x9906) ||
+ (rdev->pdev->device == 0x9907) ||
+ (rdev->pdev->device == 0x9908) ||
+ (rdev->pdev->device == 0x9909) ||
+ (rdev->pdev->device == 0x9910) ||
+ (rdev->pdev->device == 0x9917)) {
rdev->config.cayman.max_simds_per_se = 6;
rdev->config.cayman.max_backends_per_se = 2;
} else if ((rdev->pdev->device == 0x9903) ||
- (rdev->pdev->device == 0x9904)) {
+ (rdev->pdev->device == 0x9904) ||
+ (rdev->pdev->device == 0x990A) ||
+ (rdev->pdev->device == 0x9913) ||
+ (rdev->pdev->device == 0x9918)) {
rdev->config.cayman.max_simds_per_se = 4;
rdev->config.cayman.max_backends_per_se = 2;
- } else if ((rdev->pdev->device == 0x9990) ||
- (rdev->pdev->device == 0x9991)) {
+ } else if ((rdev->pdev->device == 0x9919) ||
+ (rdev->pdev->device == 0x9990) ||
+ (rdev->pdev->device == 0x9991) ||
+ (rdev->pdev->device == 0x9994) ||
+ (rdev->pdev->device == 0x99A0)) {
rdev->config.cayman.max_simds_per_se = 3;
rdev->config.cayman.max_backends_per_se = 1;
} else {
if (r)
return r;
+ r = r600_audio_init(rdev);
+ if (r)
+ return r;
+
return 0;
}
int cayman_suspend(struct radeon_device *rdev)
{
+ r600_audio_fini(rdev);
/* FIXME: we should wait for ring to be empty */
radeon_ib_pool_suspend(rdev);
radeon_vm_manager_suspend(rdev);
WREG32(PA_CL_ENHANCE, (CLIP_VTX_REORDER_ENA |
NUM_CLIP_SEQ(3)));
WREG32(PA_SC_ENHANCE, FORCE_EOV_MAX_CLK_CNT(4095));
+ WREG32(VC_ENHANCE, 0);
}
if (r)
return r;
+ r = r600_audio_init(rdev);
+ if (r) {
+ DRM_ERROR("radeon: audio init failed\n");
+ return r;
+ }
+
return 0;
}
return r;
}
- r = r600_audio_init(rdev);
- if (r) {
- DRM_ERROR("radeon: audio resume failed\n");
- return r;
- }
-
return r;
}
rdev->accel_working = false;
}
- r = r600_audio_init(rdev);
- if (r)
- return r; /* TODO error handling */
return 0;
}
*/
static int r600_audio_chipset_supported(struct radeon_device *rdev)
{
- return (rdev->family >= CHIP_R600 && !ASIC_IS_DCE5(rdev))
+ return (rdev->family >= CHIP_R600 && !ASIC_IS_DCE6(rdev))
|| rdev->family == CHIP_RS600
|| rdev->family == CHIP_RS690
|| rdev->family == CHIP_RS740;
struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
+ struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
int base_rate = 48000;
switch (radeon_encoder->encoder_id) {
WREG32(EVERGREEN_AUDIO_PLL1_DIV, clock * 10);
WREG32(EVERGREEN_AUDIO_PLL1_UNK, 0x00000071);
- /* Some magic trigger or src sel? */
- WREG32_P(0x5ac, 0x01, ~0x77);
+ /* Select DTO source */
+ WREG32(0x5ac, radeon_crtc->crtc_id);
} else {
switch (dig->dig_encoder) {
case 0:
return -EINVAL;
}
break;
+ case PACKET3_STRMOUT_BASE_UPDATE:
+ if (p->family < CHIP_RV770) {
+ DRM_ERROR("STRMOUT_BASE_UPDATE only supported on 7xx\n");
+ return -EINVAL;
+ }
+ if (pkt->count != 1) {
+ DRM_ERROR("bad STRMOUT_BASE_UPDATE packet count\n");
+ return -EINVAL;
+ }
+ if (idx_value > 3) {
+ DRM_ERROR("bad STRMOUT_BASE_UPDATE index\n");
+ return -EINVAL;
+ }
+ {
+ u64 offset;
+
+ r = r600_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ DRM_ERROR("bad STRMOUT_BASE_UPDATE reloc\n");
+ return -EINVAL;
+ }
+
+ if (reloc->robj != track->vgt_strmout_bo[idx_value]) {
+ DRM_ERROR("bad STRMOUT_BASE_UPDATE, bo does not match\n");
+ return -EINVAL;
+ }
+
+ offset = radeon_get_ib_value(p, idx+1) << 8;
+ if (offset != track->vgt_strmout_bo_offset[idx_value]) {
+ DRM_ERROR("bad STRMOUT_BASE_UPDATE, bo offset does not match: 0x%llx, 0x%x\n",
+ offset, track->vgt_strmout_bo_offset[idx_value]);
+ return -EINVAL;
+ }
+
+ if ((offset + 4) > radeon_bo_size(reloc->robj)) {
+ DRM_ERROR("bad STRMOUT_BASE_UPDATE bo too small: 0x%llx, 0x%lx\n",
+ offset + 4, radeon_bo_size(reloc->robj));
+ return -EINVAL;
+ }
+ ib[idx+1] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+ }
+ break;
case PACKET3_SURFACE_BASE_UPDATE:
if (p->family >= CHIP_RV770 || p->family == CHIP_R600) {
DRM_ERROR("bad SURFACE_BASE_UPDATE\n");
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
uint32_t offset;
- if (ASIC_IS_DCE5(rdev))
- return;
-
/* Silent, r600_hdmi_enable will raise WARN for us */
if (!dig->afmt->enabled)
return;
WREG32(HDMI0_AUDIO_PACKET_CONTROL + offset,
HDMI0_AUDIO_SAMPLE_SEND | /* send audio packets */
HDMI0_AUDIO_DELAY_EN(1) | /* default audio delay */
- HDMI0_AUDIO_SEND_MAX_PACKETS | /* send NULL packets if no audio is available */
HDMI0_AUDIO_PACKETS_PER_LINE(3) | /* should be suffient for all audio modes and small enough for all hblanks */
HDMI0_60958_CS_UPDATE); /* allow 60958 channel status fields to be updated */
}
uint32_t offset;
u32 hdmi;
- if (ASIC_IS_DCE5(rdev))
+ if (ASIC_IS_DCE6(rdev))
return;
/* Silent, r600_hdmi_enable will raise WARN for us */
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
uint32_t offset;
- if (ASIC_IS_DCE5(rdev))
+ if (ASIC_IS_DCE6(rdev))
return;
/* Called for ATOM_ENCODER_MODE_HDMI only */
#define TC_L2_SIZE(x) ((x)<<5)
#define L2_DISABLE_LATE_HIT (1<<9)
+#define VC_ENHANCE 0x9714
#define VGT_CACHE_INVALIDATION 0x88C4
#define CACHE_INVALIDATION(x) ((x)<<0)
#define PACKET3_SET_CTL_CONST 0x6F
#define PACKET3_SET_CTL_CONST_OFFSET 0x0003cff0
#define PACKET3_SET_CTL_CONST_END 0x0003e200
+#define PACKET3_STRMOUT_BASE_UPDATE 0x72 /* r7xx */
#define PACKET3_SURFACE_BASE_UPDATE 0x73
struct si_asic {
unsigned max_shader_engines;
- unsigned max_pipes_per_simd;
unsigned max_tile_pipes;
- unsigned max_simds_per_se;
+ unsigned max_cu_per_sh;
+ unsigned max_sh_per_se;
unsigned max_backends_per_se;
unsigned max_texture_channel_caches;
unsigned max_gprs;
unsigned sc_hiz_tile_fifo_size;
unsigned sc_earlyz_tile_fifo_size;
- unsigned num_shader_engines;
unsigned num_tile_pipes;
unsigned num_backends_per_se;
unsigned backend_disable_mask_per_asic;
* 2.13.0 - virtual memory support, streamout
* 2.14.0 - add evergreen tiling informations
* 2.15.0 - add max_pipes query
+ * 2.16.0 - fix evergreen 2D tiled surface calculation
+ * 2.17.0 - add STRMOUT_BASE_UPDATE for r7xx
*/
#define KMS_DRIVER_MAJOR 2
-#define KMS_DRIVER_MINOR 15
+#define KMS_DRIVER_MINOR 17
#define KMS_DRIVER_PATCHLEVEL 0
int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags);
int radeon_driver_unload_kms(struct drm_device *dev);
rdev->vm_manager.enabled = false;
/* mark first vm as always in use, it's the system one */
+ /* allocate enough for 2 full VM pts */
r = radeon_sa_bo_manager_init(rdev, &rdev->vm_manager.sa_manager,
- rdev->vm_manager.max_pfn * 8,
+ rdev->vm_manager.max_pfn * 8 * 2,
RADEON_GEM_DOMAIN_VRAM);
if (r) {
dev_err(rdev->dev, "failed to allocate vm bo (%dKB)\n",
mutex_lock(&vm->mutex);
if (last_pfn > vm->last_pfn) {
- /* grow va space 32M by 32M */
- unsigned align = ((32 << 20) >> 12) - 1;
+ /* release mutex and lock in right order */
+ mutex_unlock(&vm->mutex);
radeon_mutex_lock(&rdev->cs_mutex);
- radeon_vm_unbind_locked(rdev, vm);
+ mutex_lock(&vm->mutex);
+ /* and check again */
+ if (last_pfn > vm->last_pfn) {
+ /* grow va space 32M by 32M */
+ unsigned align = ((32 << 20) >> 12) - 1;
+ radeon_vm_unbind_locked(rdev, vm);
+ vm->last_pfn = (last_pfn + align) & ~align;
+ }
radeon_mutex_unlock(&rdev->cs_mutex);
- vm->last_pfn = (last_pfn + align) & ~align;
}
head = &vm->va;
last_offset = 0;
if (bo_va == NULL)
return 0;
- mutex_lock(&vm->mutex);
radeon_mutex_lock(&rdev->cs_mutex);
+ mutex_lock(&vm->mutex);
radeon_vm_bo_update_pte(rdev, vm, bo, NULL);
radeon_mutex_unlock(&rdev->cs_mutex);
list_del(&bo_va->vm_list);
mutex_init(&vm->mutex);
INIT_LIST_HEAD(&vm->list);
INIT_LIST_HEAD(&vm->va);
- vm->last_pfn = 0;
+ /* SI requires equal sized PTs for all VMs, so always set
+ * last_pfn to max_pfn. cayman allows variable sized
+ * pts so we can grow then as needed. Once we switch
+ * to two level pts we can unify this again.
+ */
+ if (rdev->family >= CHIP_TAHITI)
+ vm->last_pfn = rdev->vm_manager.max_pfn;
+ else
+ vm->last_pfn = 0;
/* map the ib pool buffer at 0 in virtual address space, set
* read only
*/
struct radeon_bo_va *bo_va, *tmp;
int r;
- mutex_lock(&vm->mutex);
-
radeon_mutex_lock(&rdev->cs_mutex);
+ mutex_lock(&vm->mutex);
radeon_vm_unbind_locked(rdev, vm);
radeon_mutex_unlock(&rdev->cs_mutex);
int radeon_gem_busy_ioctl(struct drm_device *dev, void *data,
struct drm_file *filp)
{
+ struct radeon_device *rdev = dev->dev_private;
struct drm_radeon_gem_busy *args = data;
struct drm_gem_object *gobj;
struct radeon_bo *robj;
break;
}
drm_gem_object_unreference_unlocked(gobj);
- r = radeon_gem_handle_lockup(robj->rdev, r);
+ r = radeon_gem_handle_lockup(rdev, r);
return r;
}
int radeon_gem_wait_idle_ioctl(struct drm_device *dev, void *data,
struct drm_file *filp)
{
+ struct radeon_device *rdev = dev->dev_private;
struct drm_radeon_gem_wait_idle *args = data;
struct drm_gem_object *gobj;
struct radeon_bo *robj;
robj = gem_to_radeon_bo(gobj);
r = radeon_bo_wait(robj, NULL, false);
/* callback hw specific functions if any */
- if (robj->rdev->asic->ioctl_wait_idle)
- robj->rdev->asic->ioctl_wait_idle(robj->rdev, robj);
+ if (rdev->asic->ioctl_wait_idle)
+ robj->rdev->asic->ioctl_wait_idle(rdev, robj);
drm_gem_object_unreference_unlocked(gobj);
- r = radeon_gem_handle_lockup(robj->rdev, r);
+ r = radeon_gem_handle_lockup(rdev, r);
return r;
}
break;
case RADEON_INFO_MAX_PIPES:
if (rdev->family >= CHIP_TAHITI)
- value = rdev->config.si.max_pipes_per_simd;
+ value = rdev->config.si.max_cu_per_sh;
else if (rdev->family >= CHIP_CAYMAN)
value = rdev->config.cayman.max_pipes_per_simd;
else if (rdev->family >= CHIP_CEDAR)
int i;
for (i = 0; i < RADEON_NUM_RINGS; ++i) {
- not_processed += radeon_fence_count_emitted(rdev, i);
- if (not_processed >= 3)
- break;
+ struct radeon_ring *ring = &rdev->ring[i];
+
+ if (ring->ready) {
+ not_processed += radeon_fence_count_emitted(rdev, i);
+ if (not_processed >= 3)
+ break;
+ }
}
if (not_processed >= 3) { /* should upclock */
struct radeon_bo *bo = gem_to_radeon_bo(obj);
int ret = 0;
+ ret = radeon_bo_reserve(bo, false);
+ if (unlikely(ret != 0))
+ return ERR_PTR(ret);
+
/* pin buffer into GTT */
ret = radeon_bo_pin(bo, RADEON_GEM_DOMAIN_GTT, NULL);
- if (ret)
+ if (ret) {
+ radeon_bo_unreserve(bo);
return ERR_PTR(ret);
-
+ }
+ radeon_bo_unreserve(bo);
return dma_buf_export(bo, &radeon_dmabuf_ops, obj->size, flags);
}
return r;
}
- r = r600_audio_init(rdev);
- if (r) {
- dev_err(rdev->dev, "failed initializing audio\n");
- return r;
- }
-
r = radeon_ib_pool_start(rdev);
if (r)
return r;
if (r)
return r;
+ r = r600_audio_init(rdev);
+ if (r) {
+ dev_err(rdev->dev, "failed initializing audio\n");
+ return r;
+ }
+
return 0;
}
return r;
}
- r = r600_audio_init(rdev);
- if (r) {
- dev_err(rdev->dev, "failed initializing audio\n");
- return r;
- }
-
r = radeon_ib_pool_start(rdev);
if (r)
return r;
if (r)
return r;
+ r = r600_audio_init(rdev);
+ if (r) {
+ dev_err(rdev->dev, "failed initializing audio\n");
+ return r;
+ }
+
return 0;
}
ACK_FLUSH_CTL(3) |
SYNC_FLUSH_CTL));
+ if (rdev->family != CHIP_RV770)
+ WREG32(SMX_SAR_CTL0, 0x00003f3f);
+
db_debug3 = RREG32(DB_DEBUG3);
db_debug3 &= ~DB_CLK_OFF_DELAY(0x1f);
switch (rdev->family) {
WREG32(PA_CL_ENHANCE, (CLIP_VTX_REORDER_ENA |
NUM_CLIP_SEQ(3)));
-
+ WREG32(VC_ENHANCE, 0);
}
void r700_vram_gtt_location(struct radeon_device *rdev, struct radeon_mc *mc)
if (r)
return r;
+ r = r600_audio_init(rdev);
+ if (r) {
+ DRM_ERROR("radeon: audio init failed\n");
+ return r;
+ }
+
return 0;
}
return r;
}
- r = r600_audio_init(rdev);
- if (r) {
- dev_err(rdev->dev, "radeon: audio init failed\n");
- return r;
- }
-
return r;
}
rdev->accel_working = false;
}
- r = r600_audio_init(rdev);
- if (r) {
- dev_err(rdev->dev, "radeon: audio init failed\n");
- return r;
- }
-
return 0;
}
#define SCRATCH_UMSK 0x8540
#define SCRATCH_ADDR 0x8544
+#define SMX_SAR_CTL0 0xA008
#define SMX_DC_CTL0 0xA020
#define USE_HASH_FUNCTION (1 << 0)
#define CACHE_DEPTH(x) ((x) << 1)
#define TCP_CNTL 0x9610
#define TCP_CHAN_STEER 0x9614
+#define VC_ENHANCE 0x9714
+
#define VGT_CACHE_INVALIDATION 0x88C4
#define CACHE_INVALIDATION(x) ((x)<<0)
#define VC_ONLY 0
/*
* Core functions
*/
-static u32 si_get_tile_pipe_to_backend_map(struct radeon_device *rdev,
- u32 num_tile_pipes,
- u32 num_backends_per_asic,
- u32 *backend_disable_mask_per_asic,
- u32 num_shader_engines)
-{
- u32 backend_map = 0;
- u32 enabled_backends_mask = 0;
- u32 enabled_backends_count = 0;
- u32 num_backends_per_se;
- u32 cur_pipe;
- u32 swizzle_pipe[SI_MAX_PIPES];
- u32 cur_backend = 0;
- u32 i;
- bool force_no_swizzle;
-
- /* force legal values */
- if (num_tile_pipes < 1)
- num_tile_pipes = 1;
- if (num_tile_pipes > rdev->config.si.max_tile_pipes)
- num_tile_pipes = rdev->config.si.max_tile_pipes;
- if (num_shader_engines < 1)
- num_shader_engines = 1;
- if (num_shader_engines > rdev->config.si.max_shader_engines)
- num_shader_engines = rdev->config.si.max_shader_engines;
- if (num_backends_per_asic < num_shader_engines)
- num_backends_per_asic = num_shader_engines;
- if (num_backends_per_asic > (rdev->config.si.max_backends_per_se * num_shader_engines))
- num_backends_per_asic = rdev->config.si.max_backends_per_se * num_shader_engines;
-
- /* make sure we have the same number of backends per se */
- num_backends_per_asic = ALIGN(num_backends_per_asic, num_shader_engines);
- /* set up the number of backends per se */
- num_backends_per_se = num_backends_per_asic / num_shader_engines;
- if (num_backends_per_se > rdev->config.si.max_backends_per_se) {
- num_backends_per_se = rdev->config.si.max_backends_per_se;
- num_backends_per_asic = num_backends_per_se * num_shader_engines;
- }
-
- /* create enable mask and count for enabled backends */
- for (i = 0; i < SI_MAX_BACKENDS; ++i) {
- if (((*backend_disable_mask_per_asic >> i) & 1) == 0) {
- enabled_backends_mask |= (1 << i);
- ++enabled_backends_count;
- }
- if (enabled_backends_count == num_backends_per_asic)
- break;
- }
-
- /* force the backends mask to match the current number of backends */
- if (enabled_backends_count != num_backends_per_asic) {
- u32 this_backend_enabled;
- u32 shader_engine;
- u32 backend_per_se;
-
- enabled_backends_mask = 0;
- enabled_backends_count = 0;
- *backend_disable_mask_per_asic = SI_MAX_BACKENDS_MASK;
- for (i = 0; i < SI_MAX_BACKENDS; ++i) {
- /* calc the current se */
- shader_engine = i / rdev->config.si.max_backends_per_se;
- /* calc the backend per se */
- backend_per_se = i % rdev->config.si.max_backends_per_se;
- /* default to not enabled */
- this_backend_enabled = 0;
- if ((shader_engine < num_shader_engines) &&
- (backend_per_se < num_backends_per_se))
- this_backend_enabled = 1;
- if (this_backend_enabled) {
- enabled_backends_mask |= (1 << i);
- *backend_disable_mask_per_asic &= ~(1 << i);
- ++enabled_backends_count;
- }
- }
- }
-
-
- memset((uint8_t *)&swizzle_pipe[0], 0, sizeof(u32) * SI_MAX_PIPES);
- switch (rdev->family) {
- case CHIP_TAHITI:
- case CHIP_PITCAIRN:
- case CHIP_VERDE:
- force_no_swizzle = true;
- break;
- default:
- force_no_swizzle = false;
- break;
- }
- if (force_no_swizzle) {
- bool last_backend_enabled = false;
-
- force_no_swizzle = false;
- for (i = 0; i < SI_MAX_BACKENDS; ++i) {
- if (((enabled_backends_mask >> i) & 1) == 1) {
- if (last_backend_enabled)
- force_no_swizzle = true;
- last_backend_enabled = true;
- } else
- last_backend_enabled = false;
- }
- }
-
- switch (num_tile_pipes) {
- case 1:
- case 3:
- case 5:
- case 7:
- DRM_ERROR("odd number of pipes!\n");
- break;
- case 2:
- swizzle_pipe[0] = 0;
- swizzle_pipe[1] = 1;
- break;
- case 4:
- if (force_no_swizzle) {
- swizzle_pipe[0] = 0;
- swizzle_pipe[1] = 1;
- swizzle_pipe[2] = 2;
- swizzle_pipe[3] = 3;
- } else {
- swizzle_pipe[0] = 0;
- swizzle_pipe[1] = 2;
- swizzle_pipe[2] = 1;
- swizzle_pipe[3] = 3;
- }
- break;
- case 6:
- if (force_no_swizzle) {
- swizzle_pipe[0] = 0;
- swizzle_pipe[1] = 1;
- swizzle_pipe[2] = 2;
- swizzle_pipe[3] = 3;
- swizzle_pipe[4] = 4;
- swizzle_pipe[5] = 5;
- } else {
- swizzle_pipe[0] = 0;
- swizzle_pipe[1] = 2;
- swizzle_pipe[2] = 4;
- swizzle_pipe[3] = 1;
- swizzle_pipe[4] = 3;
- swizzle_pipe[5] = 5;
- }
- break;
- case 8:
- if (force_no_swizzle) {
- swizzle_pipe[0] = 0;
- swizzle_pipe[1] = 1;
- swizzle_pipe[2] = 2;
- swizzle_pipe[3] = 3;
- swizzle_pipe[4] = 4;
- swizzle_pipe[5] = 5;
- swizzle_pipe[6] = 6;
- swizzle_pipe[7] = 7;
- } else {
- swizzle_pipe[0] = 0;
- swizzle_pipe[1] = 2;
- swizzle_pipe[2] = 4;
- swizzle_pipe[3] = 6;
- swizzle_pipe[4] = 1;
- swizzle_pipe[5] = 3;
- swizzle_pipe[6] = 5;
- swizzle_pipe[7] = 7;
- }
- break;
- }
-
- for (cur_pipe = 0; cur_pipe < num_tile_pipes; ++cur_pipe) {
- while (((1 << cur_backend) & enabled_backends_mask) == 0)
- cur_backend = (cur_backend + 1) % SI_MAX_BACKENDS;
-
- backend_map |= (((cur_backend & 0xf) << (swizzle_pipe[cur_pipe] * 4)));
-
- cur_backend = (cur_backend + 1) % SI_MAX_BACKENDS;
- }
-
- return backend_map;
-}
-
-static u32 si_get_disable_mask_per_asic(struct radeon_device *rdev,
- u32 disable_mask_per_se,
- u32 max_disable_mask_per_se,
- u32 num_shader_engines)
-{
- u32 disable_field_width_per_se = r600_count_pipe_bits(disable_mask_per_se);
- u32 disable_mask_per_asic = disable_mask_per_se & max_disable_mask_per_se;
-
- if (num_shader_engines == 1)
- return disable_mask_per_asic;
- else if (num_shader_engines == 2)
- return disable_mask_per_asic | (disable_mask_per_asic << disable_field_width_per_se);
- else
- return 0xffffffff;
-}
-
static void si_tiling_mode_table_init(struct radeon_device *rdev)
{
const u32 num_tile_mode_states = 32;
DRM_ERROR("unknown asic: 0x%x\n", rdev->family);
}
+static void si_select_se_sh(struct radeon_device *rdev,
+ u32 se_num, u32 sh_num)
+{
+ u32 data = INSTANCE_BROADCAST_WRITES;
+
+ if ((se_num == 0xffffffff) && (sh_num == 0xffffffff))
+ data = SH_BROADCAST_WRITES | SE_BROADCAST_WRITES;
+ else if (se_num == 0xffffffff)
+ data |= SE_BROADCAST_WRITES | SH_INDEX(sh_num);
+ else if (sh_num == 0xffffffff)
+ data |= SH_BROADCAST_WRITES | SE_INDEX(se_num);
+ else
+ data |= SH_INDEX(sh_num) | SE_INDEX(se_num);
+ WREG32(GRBM_GFX_INDEX, data);
+}
+
+static u32 si_create_bitmask(u32 bit_width)
+{
+ u32 i, mask = 0;
+
+ for (i = 0; i < bit_width; i++) {
+ mask <<= 1;
+ mask |= 1;
+ }
+ return mask;
+}
+
+static u32 si_get_cu_enabled(struct radeon_device *rdev, u32 cu_per_sh)
+{
+ u32 data, mask;
+
+ data = RREG32(CC_GC_SHADER_ARRAY_CONFIG);
+ if (data & 1)
+ data &= INACTIVE_CUS_MASK;
+ else
+ data = 0;
+ data |= RREG32(GC_USER_SHADER_ARRAY_CONFIG);
+
+ data >>= INACTIVE_CUS_SHIFT;
+
+ mask = si_create_bitmask(cu_per_sh);
+
+ return ~data & mask;
+}
+
+static void si_setup_spi(struct radeon_device *rdev,
+ u32 se_num, u32 sh_per_se,
+ u32 cu_per_sh)
+{
+ int i, j, k;
+ u32 data, mask, active_cu;
+
+ for (i = 0; i < se_num; i++) {
+ for (j = 0; j < sh_per_se; j++) {
+ si_select_se_sh(rdev, i, j);
+ data = RREG32(SPI_STATIC_THREAD_MGMT_3);
+ active_cu = si_get_cu_enabled(rdev, cu_per_sh);
+
+ mask = 1;
+ for (k = 0; k < 16; k++) {
+ mask <<= k;
+ if (active_cu & mask) {
+ data &= ~mask;
+ WREG32(SPI_STATIC_THREAD_MGMT_3, data);
+ break;
+ }
+ }
+ }
+ }
+ si_select_se_sh(rdev, 0xffffffff, 0xffffffff);
+}
+
+static u32 si_get_rb_disabled(struct radeon_device *rdev,
+ u32 max_rb_num, u32 se_num,
+ u32 sh_per_se)
+{
+ u32 data, mask;
+
+ data = RREG32(CC_RB_BACKEND_DISABLE);
+ if (data & 1)
+ data &= BACKEND_DISABLE_MASK;
+ else
+ data = 0;
+ data |= RREG32(GC_USER_RB_BACKEND_DISABLE);
+
+ data >>= BACKEND_DISABLE_SHIFT;
+
+ mask = si_create_bitmask(max_rb_num / se_num / sh_per_se);
+
+ return data & mask;
+}
+
+static void si_setup_rb(struct radeon_device *rdev,
+ u32 se_num, u32 sh_per_se,
+ u32 max_rb_num)
+{
+ int i, j;
+ u32 data, mask;
+ u32 disabled_rbs = 0;
+ u32 enabled_rbs = 0;
+
+ for (i = 0; i < se_num; i++) {
+ for (j = 0; j < sh_per_se; j++) {
+ si_select_se_sh(rdev, i, j);
+ data = si_get_rb_disabled(rdev, max_rb_num, se_num, sh_per_se);
+ disabled_rbs |= data << ((i * sh_per_se + j) * TAHITI_RB_BITMAP_WIDTH_PER_SH);
+ }
+ }
+ si_select_se_sh(rdev, 0xffffffff, 0xffffffff);
+
+ mask = 1;
+ for (i = 0; i < max_rb_num; i++) {
+ if (!(disabled_rbs & mask))
+ enabled_rbs |= mask;
+ mask <<= 1;
+ }
+
+ for (i = 0; i < se_num; i++) {
+ si_select_se_sh(rdev, i, 0xffffffff);
+ data = 0;
+ for (j = 0; j < sh_per_se; j++) {
+ switch (enabled_rbs & 3) {
+ case 1:
+ data |= (RASTER_CONFIG_RB_MAP_0 << (i * sh_per_se + j) * 2);
+ break;
+ case 2:
+ data |= (RASTER_CONFIG_RB_MAP_3 << (i * sh_per_se + j) * 2);
+ break;
+ case 3:
+ default:
+ data |= (RASTER_CONFIG_RB_MAP_2 << (i * sh_per_se + j) * 2);
+ break;
+ }
+ enabled_rbs >>= 2;
+ }
+ WREG32(PA_SC_RASTER_CONFIG, data);
+ }
+ si_select_se_sh(rdev, 0xffffffff, 0xffffffff);
+}
+
static void si_gpu_init(struct radeon_device *rdev)
{
- u32 cc_rb_backend_disable = 0;
- u32 cc_gc_shader_array_config;
u32 gb_addr_config = 0;
u32 mc_shared_chmap, mc_arb_ramcfg;
- u32 gb_backend_map;
- u32 cgts_tcc_disable;
u32 sx_debug_1;
- u32 gc_user_shader_array_config;
- u32 gc_user_rb_backend_disable;
- u32 cgts_user_tcc_disable;
u32 hdp_host_path_cntl;
u32 tmp;
int i, j;
switch (rdev->family) {
case CHIP_TAHITI:
rdev->config.si.max_shader_engines = 2;
- rdev->config.si.max_pipes_per_simd = 4;
rdev->config.si.max_tile_pipes = 12;
- rdev->config.si.max_simds_per_se = 8;
+ rdev->config.si.max_cu_per_sh = 8;
+ rdev->config.si.max_sh_per_se = 2;
rdev->config.si.max_backends_per_se = 4;
rdev->config.si.max_texture_channel_caches = 12;
rdev->config.si.max_gprs = 256;
rdev->config.si.sc_prim_fifo_size_backend = 0x100;
rdev->config.si.sc_hiz_tile_fifo_size = 0x30;
rdev->config.si.sc_earlyz_tile_fifo_size = 0x130;
+ gb_addr_config = TAHITI_GB_ADDR_CONFIG_GOLDEN;
break;
case CHIP_PITCAIRN:
rdev->config.si.max_shader_engines = 2;
- rdev->config.si.max_pipes_per_simd = 4;
rdev->config.si.max_tile_pipes = 8;
- rdev->config.si.max_simds_per_se = 5;
+ rdev->config.si.max_cu_per_sh = 5;
+ rdev->config.si.max_sh_per_se = 2;
rdev->config.si.max_backends_per_se = 4;
rdev->config.si.max_texture_channel_caches = 8;
rdev->config.si.max_gprs = 256;
rdev->config.si.sc_prim_fifo_size_backend = 0x100;
rdev->config.si.sc_hiz_tile_fifo_size = 0x30;
rdev->config.si.sc_earlyz_tile_fifo_size = 0x130;
+ gb_addr_config = TAHITI_GB_ADDR_CONFIG_GOLDEN;
break;
case CHIP_VERDE:
default:
rdev->config.si.max_shader_engines = 1;
- rdev->config.si.max_pipes_per_simd = 4;
rdev->config.si.max_tile_pipes = 4;
- rdev->config.si.max_simds_per_se = 2;
+ rdev->config.si.max_cu_per_sh = 2;
+ rdev->config.si.max_sh_per_se = 2;
rdev->config.si.max_backends_per_se = 4;
rdev->config.si.max_texture_channel_caches = 4;
rdev->config.si.max_gprs = 256;
rdev->config.si.sc_prim_fifo_size_backend = 0x40;
rdev->config.si.sc_hiz_tile_fifo_size = 0x30;
rdev->config.si.sc_earlyz_tile_fifo_size = 0x130;
+ gb_addr_config = VERDE_GB_ADDR_CONFIG_GOLDEN;
break;
}
mc_shared_chmap = RREG32(MC_SHARED_CHMAP);
mc_arb_ramcfg = RREG32(MC_ARB_RAMCFG);
- cc_rb_backend_disable = RREG32(CC_RB_BACKEND_DISABLE);
- cc_gc_shader_array_config = RREG32(CC_GC_SHADER_ARRAY_CONFIG);
- cgts_tcc_disable = 0xffff0000;
- for (i = 0; i < rdev->config.si.max_texture_channel_caches; i++)
- cgts_tcc_disable &= ~(1 << (16 + i));
- gc_user_rb_backend_disable = RREG32(GC_USER_RB_BACKEND_DISABLE);
- gc_user_shader_array_config = RREG32(GC_USER_SHADER_ARRAY_CONFIG);
- cgts_user_tcc_disable = RREG32(CGTS_USER_TCC_DISABLE);
-
- rdev->config.si.num_shader_engines = rdev->config.si.max_shader_engines;
rdev->config.si.num_tile_pipes = rdev->config.si.max_tile_pipes;
- tmp = ((~gc_user_rb_backend_disable) & BACKEND_DISABLE_MASK) >> BACKEND_DISABLE_SHIFT;
- rdev->config.si.num_backends_per_se = r600_count_pipe_bits(tmp);
- tmp = (gc_user_rb_backend_disable & BACKEND_DISABLE_MASK) >> BACKEND_DISABLE_SHIFT;
- rdev->config.si.backend_disable_mask_per_asic =
- si_get_disable_mask_per_asic(rdev, tmp, SI_MAX_BACKENDS_PER_SE_MASK,
- rdev->config.si.num_shader_engines);
- rdev->config.si.backend_map =
- si_get_tile_pipe_to_backend_map(rdev, rdev->config.si.num_tile_pipes,
- rdev->config.si.num_backends_per_se *
- rdev->config.si.num_shader_engines,
- &rdev->config.si.backend_disable_mask_per_asic,
- rdev->config.si.num_shader_engines);
- tmp = ((~cgts_user_tcc_disable) & TCC_DISABLE_MASK) >> TCC_DISABLE_SHIFT;
- rdev->config.si.num_texture_channel_caches = r600_count_pipe_bits(tmp);
rdev->config.si.mem_max_burst_length_bytes = 256;
tmp = (mc_arb_ramcfg & NOOFCOLS_MASK) >> NOOFCOLS_SHIFT;
rdev->config.si.mem_row_size_in_kb = (4 * (1 << (8 + tmp))) / 1024;
rdev->config.si.num_gpus = 1;
rdev->config.si.multi_gpu_tile_size = 64;
- gb_addr_config = 0;
- switch (rdev->config.si.num_tile_pipes) {
- case 1:
- gb_addr_config |= NUM_PIPES(0);
- break;
- case 2:
- gb_addr_config |= NUM_PIPES(1);
- break;
- case 4:
- gb_addr_config |= NUM_PIPES(2);
- break;
- case 8:
- default:
- gb_addr_config |= NUM_PIPES(3);
- break;
- }
-
- tmp = (rdev->config.si.mem_max_burst_length_bytes / 256) - 1;
- gb_addr_config |= PIPE_INTERLEAVE_SIZE(tmp);
- gb_addr_config |= NUM_SHADER_ENGINES(rdev->config.si.num_shader_engines - 1);
- tmp = (rdev->config.si.shader_engine_tile_size / 16) - 1;
- gb_addr_config |= SHADER_ENGINE_TILE_SIZE(tmp);
- switch (rdev->config.si.num_gpus) {
- case 1:
- default:
- gb_addr_config |= NUM_GPUS(0);
- break;
- case 2:
- gb_addr_config |= NUM_GPUS(1);
- break;
- case 4:
- gb_addr_config |= NUM_GPUS(2);
- break;
- }
- switch (rdev->config.si.multi_gpu_tile_size) {
- case 16:
- gb_addr_config |= MULTI_GPU_TILE_SIZE(0);
- break;
- case 32:
- default:
- gb_addr_config |= MULTI_GPU_TILE_SIZE(1);
- break;
- case 64:
- gb_addr_config |= MULTI_GPU_TILE_SIZE(2);
- break;
- case 128:
- gb_addr_config |= MULTI_GPU_TILE_SIZE(3);
- break;
- }
+ /* fix up row size */
+ gb_addr_config &= ~ROW_SIZE_MASK;
switch (rdev->config.si.mem_row_size_in_kb) {
case 1:
default:
break;
}
- tmp = (gb_addr_config & NUM_PIPES_MASK) >> NUM_PIPES_SHIFT;
- rdev->config.si.num_tile_pipes = (1 << tmp);
- tmp = (gb_addr_config & PIPE_INTERLEAVE_SIZE_MASK) >> PIPE_INTERLEAVE_SIZE_SHIFT;
- rdev->config.si.mem_max_burst_length_bytes = (tmp + 1) * 256;
- tmp = (gb_addr_config & NUM_SHADER_ENGINES_MASK) >> NUM_SHADER_ENGINES_SHIFT;
- rdev->config.si.num_shader_engines = tmp + 1;
- tmp = (gb_addr_config & NUM_GPUS_MASK) >> NUM_GPUS_SHIFT;
- rdev->config.si.num_gpus = tmp + 1;
- tmp = (gb_addr_config & MULTI_GPU_TILE_SIZE_MASK) >> MULTI_GPU_TILE_SIZE_SHIFT;
- rdev->config.si.multi_gpu_tile_size = 1 << tmp;
- tmp = (gb_addr_config & ROW_SIZE_MASK) >> ROW_SIZE_SHIFT;
- rdev->config.si.mem_row_size_in_kb = 1 << tmp;
-
- gb_backend_map =
- si_get_tile_pipe_to_backend_map(rdev, rdev->config.si.num_tile_pipes,
- rdev->config.si.num_backends_per_se *
- rdev->config.si.num_shader_engines,
- &rdev->config.si.backend_disable_mask_per_asic,
- rdev->config.si.num_shader_engines);
-
/* setup tiling info dword. gb_addr_config is not adequate since it does
* not have bank info, so create a custom tiling dword.
* bits 3:0 num_pipes
rdev->config.si.tile_config |= (3 << 0);
break;
}
- rdev->config.si.tile_config |=
- ((mc_arb_ramcfg & NOOFBANK_MASK) >> NOOFBANK_SHIFT) << 4;
+ if ((mc_arb_ramcfg & NOOFBANK_MASK) >> NOOFBANK_SHIFT)
+ rdev->config.si.tile_config |= 1 << 4;
+ else
+ rdev->config.si.tile_config |= 0 << 4;
rdev->config.si.tile_config |=
((gb_addr_config & PIPE_INTERLEAVE_SIZE_MASK) >> PIPE_INTERLEAVE_SIZE_SHIFT) << 8;
rdev->config.si.tile_config |=
((gb_addr_config & ROW_SIZE_MASK) >> ROW_SIZE_SHIFT) << 12;
- rdev->config.si.backend_map = gb_backend_map;
WREG32(GB_ADDR_CONFIG, gb_addr_config);
WREG32(DMIF_ADDR_CONFIG, gb_addr_config);
WREG32(HDP_ADDR_CONFIG, gb_addr_config);
- /* primary versions */
- WREG32(CC_RB_BACKEND_DISABLE, cc_rb_backend_disable);
- WREG32(CC_SYS_RB_BACKEND_DISABLE, cc_rb_backend_disable);
- WREG32(CC_GC_SHADER_ARRAY_CONFIG, cc_gc_shader_array_config);
-
- WREG32(CGTS_TCC_DISABLE, cgts_tcc_disable);
+ si_tiling_mode_table_init(rdev);
- /* user versions */
- WREG32(GC_USER_RB_BACKEND_DISABLE, cc_rb_backend_disable);
- WREG32(GC_USER_SYS_RB_BACKEND_DISABLE, cc_rb_backend_disable);
- WREG32(GC_USER_SHADER_ARRAY_CONFIG, cc_gc_shader_array_config);
+ si_setup_rb(rdev, rdev->config.si.max_shader_engines,
+ rdev->config.si.max_sh_per_se,
+ rdev->config.si.max_backends_per_se);
- WREG32(CGTS_USER_TCC_DISABLE, cgts_tcc_disable);
+ si_setup_spi(rdev, rdev->config.si.max_shader_engines,
+ rdev->config.si.max_sh_per_se,
+ rdev->config.si.max_cu_per_sh);
- si_tiling_mode_table_init(rdev);
/* set HW defaults for 3D engine */
WREG32(CP_QUEUE_THRESHOLDS, (ROQ_IB1_START(0x16) |
WREG32(0x15DC, 0);
/* empty context1-15 */
- /* FIXME start with 1G, once using 2 level pt switch to full
+ /* FIXME start with 4G, once using 2 level pt switch to full
* vm size space
*/
/* set vm size, must be a multiple of 4 */
WREG32(VM_CONTEXT1_PAGE_TABLE_START_ADDR, 0);
- WREG32(VM_CONTEXT1_PAGE_TABLE_END_ADDR, (1 << 30) / RADEON_GPU_PAGE_SIZE);
+ WREG32(VM_CONTEXT1_PAGE_TABLE_END_ADDR, rdev->vm_manager.max_pfn);
for (i = 1; i < 16; i++) {
if (i < 8)
WREG32(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR + (i << 2),
#define SI_DC_GPIO_HPD_EN 0x65b8
#define SI_DC_GPIO_HPD_Y 0x65bc
+#define SI_GRPH_CONTROL 0x6804
+# define SI_GRPH_DEPTH(x) (((x) & 0x3) << 0)
+# define SI_GRPH_DEPTH_8BPP 0
+# define SI_GRPH_DEPTH_16BPP 1
+# define SI_GRPH_DEPTH_32BPP 2
+# define SI_GRPH_NUM_BANKS(x) (((x) & 0x3) << 2)
+# define SI_ADDR_SURF_2_BANK 0
+# define SI_ADDR_SURF_4_BANK 1
+# define SI_ADDR_SURF_8_BANK 2
+# define SI_ADDR_SURF_16_BANK 3
+# define SI_GRPH_Z(x) (((x) & 0x3) << 4)
+# define SI_GRPH_BANK_WIDTH(x) (((x) & 0x3) << 6)
+# define SI_ADDR_SURF_BANK_WIDTH_1 0
+# define SI_ADDR_SURF_BANK_WIDTH_2 1
+# define SI_ADDR_SURF_BANK_WIDTH_4 2
+# define SI_ADDR_SURF_BANK_WIDTH_8 3
+# define SI_GRPH_FORMAT(x) (((x) & 0x7) << 8)
+/* 8 BPP */
+# define SI_GRPH_FORMAT_INDEXED 0
+/* 16 BPP */
+# define SI_GRPH_FORMAT_ARGB1555 0
+# define SI_GRPH_FORMAT_ARGB565 1
+# define SI_GRPH_FORMAT_ARGB4444 2
+# define SI_GRPH_FORMAT_AI88 3
+# define SI_GRPH_FORMAT_MONO16 4
+# define SI_GRPH_FORMAT_BGRA5551 5
+/* 32 BPP */
+# define SI_GRPH_FORMAT_ARGB8888 0
+# define SI_GRPH_FORMAT_ARGB2101010 1
+# define SI_GRPH_FORMAT_32BPP_DIG 2
+# define SI_GRPH_FORMAT_8B_ARGB2101010 3
+# define SI_GRPH_FORMAT_BGRA1010102 4
+# define SI_GRPH_FORMAT_8B_BGRA1010102 5
+# define SI_GRPH_FORMAT_RGB111110 6
+# define SI_GRPH_FORMAT_BGR101111 7
+# define SI_GRPH_BANK_HEIGHT(x) (((x) & 0x3) << 11)
+# define SI_ADDR_SURF_BANK_HEIGHT_1 0
+# define SI_ADDR_SURF_BANK_HEIGHT_2 1
+# define SI_ADDR_SURF_BANK_HEIGHT_4 2
+# define SI_ADDR_SURF_BANK_HEIGHT_8 3
+# define SI_GRPH_TILE_SPLIT(x) (((x) & 0x7) << 13)
+# define SI_ADDR_SURF_TILE_SPLIT_64B 0
+# define SI_ADDR_SURF_TILE_SPLIT_128B 1
+# define SI_ADDR_SURF_TILE_SPLIT_256B 2
+# define SI_ADDR_SURF_TILE_SPLIT_512B 3
+# define SI_ADDR_SURF_TILE_SPLIT_1KB 4
+# define SI_ADDR_SURF_TILE_SPLIT_2KB 5
+# define SI_ADDR_SURF_TILE_SPLIT_4KB 6
+# define SI_GRPH_MACRO_TILE_ASPECT(x) (((x) & 0x3) << 18)
+# define SI_ADDR_SURF_MACRO_TILE_ASPECT_1 0
+# define SI_ADDR_SURF_MACRO_TILE_ASPECT_2 1
+# define SI_ADDR_SURF_MACRO_TILE_ASPECT_4 2
+# define SI_ADDR_SURF_MACRO_TILE_ASPECT_8 3
+# define SI_GRPH_ARRAY_MODE(x) (((x) & 0x7) << 20)
+# define SI_GRPH_ARRAY_LINEAR_GENERAL 0
+# define SI_GRPH_ARRAY_LINEAR_ALIGNED 1
+# define SI_GRPH_ARRAY_1D_TILED_THIN1 2
+# define SI_GRPH_ARRAY_2D_TILED_THIN1 4
+# define SI_GRPH_PIPE_CONFIG(x) (((x) & 0x1f) << 24)
+# define SI_ADDR_SURF_P2 0
+# define SI_ADDR_SURF_P4_8x16 4
+# define SI_ADDR_SURF_P4_16x16 5
+# define SI_ADDR_SURF_P4_16x32 6
+# define SI_ADDR_SURF_P4_32x32 7
+# define SI_ADDR_SURF_P8_16x16_8x16 8
+# define SI_ADDR_SURF_P8_16x32_8x16 9
+# define SI_ADDR_SURF_P8_32x32_8x16 10
+# define SI_ADDR_SURF_P8_16x32_16x16 11
+# define SI_ADDR_SURF_P8_32x32_16x16 12
+# define SI_ADDR_SURF_P8_32x32_16x32 13
+# define SI_ADDR_SURF_P8_32x64_32x32 14
+
#endif
#ifndef SI_H
#define SI_H
+#define TAHITI_RB_BITMAP_WIDTH_PER_SH 2
+
+#define TAHITI_GB_ADDR_CONFIG_GOLDEN 0x12011003
+#define VERDE_GB_ADDR_CONFIG_GOLDEN 0x12010002
+
#define CG_MULT_THERMAL_STATUS 0x714
#define ASIC_MAX_TEMP(x) ((x) << 0)
#define ASIC_MAX_TEMP_MASK 0x000001ff
#define SOFT_RESET_IA (1 << 15)
#define GRBM_GFX_INDEX 0x802C
+#define INSTANCE_INDEX(x) ((x) << 0)
+#define SH_INDEX(x) ((x) << 8)
+#define SE_INDEX(x) ((x) << 16)
+#define SH_BROADCAST_WRITES (1 << 29)
+#define INSTANCE_BROADCAST_WRITES (1 << 30)
+#define SE_BROADCAST_WRITES (1 << 31)
#define GRBM_INT_CNTL 0x8060
# define RDERR_INT_ENABLE (1 << 0)
#define VGT_TF_MEMORY_BASE 0x89B8
#define CC_GC_SHADER_ARRAY_CONFIG 0x89bc
+#define INACTIVE_CUS_MASK 0xFFFF0000
+#define INACTIVE_CUS_SHIFT 16
#define GC_USER_SHADER_ARRAY_CONFIG 0x89c0
#define PA_CL_ENHANCE 0x8A14
#define RLC_MC_CNTL 0xC344
#define RLC_UCODE_CNTL 0xC348
+#define PA_SC_RASTER_CONFIG 0x28350
+# define RASTER_CONFIG_RB_MAP_0 0
+# define RASTER_CONFIG_RB_MAP_1 1
+# define RASTER_CONFIG_RB_MAP_2 2
+# define RASTER_CONFIG_RB_MAP_3 3
+
#define VGT_EVENT_INITIATOR 0x28a90
# define SAMPLE_STREAMOUTSTATS1 (1 << 0)
# define SAMPLE_STREAMOUTSTATS2 (2 << 0)
if (dev_priv == NULL)
return -ENOMEM;
+ idr_init(&dev_priv->object_idr);
dev->dev_private = (void *)dev_priv;
dev_priv->chipset = chipset;
- idr_init(&dev->object_name_idr);
return 0;
}
(*destroy)(bo);
else
kfree(bo);
+ ttm_mem_global_free(mem_glob, acc_size);
return -EINVAL;
}
bo->destroy = destroy;
struct ttm_buffer_object **p_bo)
{
struct ttm_buffer_object *bo;
- struct ttm_mem_global *mem_glob = bdev->glob->mem_glob;
size_t acc_size;
int ret;
- acc_size = ttm_bo_acc_size(bdev, size, sizeof(struct ttm_buffer_object));
- ret = ttm_mem_global_alloc(mem_glob, acc_size, false, false);
- if (unlikely(ret != 0))
- return ret;
-
bo = kzalloc(sizeof(*bo), GFP_KERNEL);
-
- if (unlikely(bo == NULL)) {
- ttm_mem_global_free(mem_glob, acc_size);
+ if (unlikely(bo == NULL))
return -ENOMEM;
- }
+ acc_size = ttm_bo_acc_size(bdev, size, sizeof(struct ttm_buffer_object));
ret = ttm_bo_init(bdev, bo, size, type, placement, page_alignment,
buffer_start, interruptible,
persistent_swap_storage, acc_size, NULL, NULL);
static struct drm_driver driver;
+/*
+ * There are many DisplayLink-based graphics products, all with unique PIDs.
+ * So we match on DisplayLink's VID + Vendor-Defined Interface Class (0xff)
+ * We also require a match on SubClass (0x00) and Protocol (0x00),
+ * which is compatible with all known USB 2.0 era graphics chips and firmware,
+ * but allows DisplayLink to increment those for any future incompatible chips
+ */
static struct usb_device_id id_table[] = {
- {.idVendor = 0x17e9, .match_flags = USB_DEVICE_ID_MATCH_VENDOR,},
+ {.idVendor = 0x17e9, .bInterfaceClass = 0xff,
+ .bInterfaceSubClass = 0x00,
+ .bInterfaceProtocol = 0x00,
+ .match_flags = USB_DEVICE_ID_MATCH_VENDOR |
+ USB_DEVICE_ID_MATCH_INT_CLASS |
+ USB_DEVICE_ID_MATCH_INT_SUBCLASS |
+ USB_DEVICE_ID_MATCH_INT_PROTOCOL,},
{},
};
MODULE_DEVICE_TABLE(usb, id_table);
u8 length;
u16 key;
- key = *((u16 *) desc);
+ key = le16_to_cpu(*((u16 *) desc));
desc += sizeof(u16);
length = *desc;
desc++;
if (dev_priv == NULL)
return -ENOMEM;
+ idr_init(&dev_priv->object_idr);
dev->dev_private = (void *)dev_priv;
dev_priv->chipset = chipset;
- idr_init(&dev->object_name_idr);
-
pci_set_master(dev->pdev);
ret = drm_vblank_init(dev, 1);
return NULL;
}
+int vga_switcheroo_get_client_state(struct pci_dev *pdev)
+{
+ struct vga_switcheroo_client *client;
+
+ client = find_client_from_pci(&vgasr_priv.clients, pdev);
+ if (!client)
+ return VGA_SWITCHEROO_NOT_FOUND;
+ if (!vgasr_priv.active)
+ return VGA_SWITCHEROO_INIT;
+ return client->pwr_state;
+}
+EXPORT_SYMBOL(vga_switcheroo_get_client_state);
+
void vga_switcheroo_unregister_client(struct pci_dev *pdev)
{
struct vga_switcheroo_client *client;
vga_switchon(new_client);
vga_set_default_device(new_client->pdev);
- set_audio_state(new_client->id, VGA_SWITCHEROO_ON);
-
return 0;
}
active->active = false;
+ set_audio_state(active->id, VGA_SWITCHEROO_OFF);
+
if (new_client->fb_info) {
struct fb_event event;
event.info = new_client->fb_info;
if (new_client->ops->reprobe)
new_client->ops->reprobe(new_client->pdev);
- set_audio_state(active->id, VGA_SWITCHEROO_OFF);
-
if (active->pwr_state == VGA_SWITCHEROO_ON)
vga_switchoff(active);
+ set_audio_state(new_client->id, VGA_SWITCHEROO_ON);
+
new_client->active = true;
return 0;
}
/* pwr off the device not in use */
if (strncmp(usercmd, "OFF", 3) == 0) {
list_for_each_entry(client, &vgasr_priv.clients, list) {
- if (client->active)
+ if (client->active || client_is_audio(client))
continue;
+ set_audio_state(client->id, VGA_SWITCHEROO_OFF);
if (client->pwr_state == VGA_SWITCHEROO_ON)
vga_switchoff(client);
}
/* pwr on the device not in use */
if (strncmp(usercmd, "ON", 2) == 0) {
list_for_each_entry(client, &vgasr_priv.clients, list) {
- if (client->active)
+ if (client->active || client_is_audio(client))
continue;
if (client->pwr_state == VGA_SWITCHEROO_OFF)
vga_switchon(client);
+ set_audio_state(client->id, VGA_SWITCHEROO_ON);
}
goto out;
}
#
# HID driver configuration
#
-menuconfig HID_SUPPORT
- bool "HID Devices"
- depends on INPUT
- default y
- ---help---
- Say Y here to get to see options for various computer-human interface
- device drivers. This option alone does not add any kernel code.
-
- If you say N, all options in this submenu will be skipped and disabled.
-
-if HID_SUPPORT
+menu "HID support"
+ depends on INPUT
config HID
- tristate "Generic HID support"
+ tristate "HID bus support"
depends on INPUT
default y
---help---
most commonly used to refer to the USB-HID specification, but other
devices (such as, but not strictly limited to, Bluetooth) are
designed using HID specification (this involves certain keyboards,
- mice, tablets, etc). This option compiles into kernel the generic
- HID layer code (parser, usages, etc.), which can then be used by
- transport-specific HID implementation (like USB or Bluetooth).
+ mice, tablets, etc). This option adds the HID bus to the kernel,
+ together with generic HID layer code. The HID devices are added and
+ removed from the HID bus by the transport-layer drivers, such as
+ usbhid (USB_HID) and hidp (BT_HIDP).
For docs and specs, see http://www.usb.org/developers/hidpage/
If unsure, say Y.
+if HID
+
config HID_BATTERY_STRENGTH
bool "Battery level reporting for HID devices"
depends on HID && POWER_SUPPLY && HID = POWER_SUPPLY
If unsure, say Y.
-source "drivers/hid/usbhid/Kconfig"
-
-menu "Special HID drivers"
- depends on HID
-
config HID_GENERIC
tristate "Generic HID driver"
depends on HID
- default y
+ default HID
---help---
- Support for generic HID devices.
+ Support for generic devices on the HID bus. This includes most
+ keyboards and mice, joysticks, tablets and digitizers.
To compile this driver as a module, choose M here: the module
will be called hid-generic.
If unsure, say Y.
+menu "Special HID drivers"
+ depends on HID
+
config HID_A4TECH
tristate "A4 tech mice" if EXPERT
depends on USB_HID
- Unitec Panels
- XAT optical touch panels
- Xiroku optical touch panels
+ - Zytronic touch panels
If unsure, say N.
endmenu
-endif # HID_SUPPORT
+endif # HID
+
+source "drivers/hid/usbhid/Kconfig"
+
+endmenu
.driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS),
.driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI),
+ .driver_data = APPLE_HAS_FN },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ISO),
+ .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS),
+ .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO),
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ISO) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_LCM)},
{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_LCM2)},
{ HID_USB_DEVICE(USB_VENDOR_ID_AVERMEDIA, USB_DEVICE_ID_AVER_FM_MR800) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_AXENTIA, USB_DEVICE_ID_AXENTIA_FM_RADIO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CIDC, 0x0103) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_RADIO_SI470X) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MCT) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_HYBRID) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_HEATCONTROL) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_MADCATZ, USB_DEVICE_ID_MADCATZ_BEATPAD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1024LS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1208LS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICKIT1) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ISO) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
{ }
#define USB_DEVICE_ID_APPLE_WELLSPRING6_ANSI 0x024c
#define USB_DEVICE_ID_APPLE_WELLSPRING6_ISO 0x024d
#define USB_DEVICE_ID_APPLE_WELLSPRING6_JIS 0x024e
+#define USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI 0x0262
+#define USB_DEVICE_ID_APPLE_WELLSPRING7_ISO 0x0263
+#define USB_DEVICE_ID_APPLE_WELLSPRING7_JIS 0x0264
#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI 0x0239
#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO 0x023a
#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS 0x023b
#define USB_VENDOR_ID_AVERMEDIA 0x07ca
#define USB_DEVICE_ID_AVER_FM_MR800 0xb800
+#define USB_VENDOR_ID_AXENTIA 0x12cf
+#define USB_DEVICE_ID_AXENTIA_FM_RADIO 0x7111
+
#define USB_VENDOR_ID_BAANTO 0x2453
#define USB_DEVICE_ID_BAANTO_MT_190W2 0x0100
#define USB_DEVICE_ID_CRYSTALTOUCH 0x0006
#define USB_DEVICE_ID_CRYSTALTOUCH_DUAL 0x0007
+#define USB_VENDOR_ID_MADCATZ 0x0738
+#define USB_DEVICE_ID_MADCATZ_BEATPAD 0x4540
+
#define USB_VENDOR_ID_MCC 0x09db
#define USB_DEVICE_ID_MCC_PMD1024LS 0x0076
#define USB_DEVICE_ID_MCC_PMD1208LS 0x007a
#define USB_DEVICE_ID_SAMSUNG_IR_REMOTE 0x0001
#define USB_DEVICE_ID_SAMSUNG_WIRELESS_KBD_MOUSE 0x0600
+#define USB_VENDOR_ID_SENNHEISER 0x1395
+#define USB_DEVICE_ID_SENNHEISER_BTD500USB 0x002c
+
#define USB_VENDOR_ID_SIGMA_MICRO 0x1c4f
#define USB_DEVICE_ID_SIGMA_MICRO_KEYBOARD 0x0002
#define USB_VENDOR_ID_ZYDACRON 0x13EC
#define USB_DEVICE_ID_ZYDACRON_REMOTE_CONTROL 0x0006
+#define USB_VENDOR_ID_ZYTRONIC 0x14c8
+#define USB_DEVICE_ID_ZYTRONIC_ZXY100 0x0005
+
#define USB_VENDOR_ID_PRIMAX 0x0461
#define USB_DEVICE_ID_PRIMAX_KEYBOARD 0x4e05
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE,
USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ANSI),
HID_BATTERY_QUIRK_PERCENT | HID_BATTERY_QUIRK_FEATURE },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE,
+ USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI),
+ HID_BATTERY_QUIRK_PERCENT | HID_BATTERY_QUIRK_FEATURE },
{}
};
static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev)
{
- struct dj_report dj_report;
+ struct dj_report *dj_report;
+ int retval;
- memset(&dj_report, 0, sizeof(dj_report));
- dj_report.report_id = REPORT_ID_DJ_SHORT;
- dj_report.device_index = 0xFF;
- dj_report.report_type = REPORT_TYPE_CMD_GET_PAIRED_DEVICES;
- return logi_dj_recv_send_report(djrcv_dev, &dj_report);
+ dj_report = kzalloc(sizeof(dj_report), GFP_KERNEL);
+ if (!dj_report)
+ return -ENOMEM;
+ dj_report->report_id = REPORT_ID_DJ_SHORT;
+ dj_report->device_index = 0xFF;
+ dj_report->report_type = REPORT_TYPE_CMD_GET_PAIRED_DEVICES;
+ retval = logi_dj_recv_send_report(djrcv_dev, dj_report);
+ kfree(dj_report);
+ return retval;
}
static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev,
unsigned timeout)
{
- struct dj_report dj_report;
+ struct dj_report *dj_report;
+ int retval;
- memset(&dj_report, 0, sizeof(dj_report));
- dj_report.report_id = REPORT_ID_DJ_SHORT;
- dj_report.device_index = 0xFF;
- dj_report.report_type = REPORT_TYPE_CMD_SWITCH;
- dj_report.report_params[CMD_SWITCH_PARAM_DEVBITFIELD] = 0x3F;
- dj_report.report_params[CMD_SWITCH_PARAM_TIMEOUT_SECONDS] = (u8)timeout;
- return logi_dj_recv_send_report(djrcv_dev, &dj_report);
+ dj_report = kzalloc(sizeof(dj_report), GFP_KERNEL);
+ if (!dj_report)
+ return -ENOMEM;
+ dj_report->report_id = REPORT_ID_DJ_SHORT;
+ dj_report->device_index = 0xFF;
+ dj_report->report_type = REPORT_TYPE_CMD_SWITCH;
+ dj_report->report_params[CMD_SWITCH_PARAM_DEVBITFIELD] = 0x3F;
+ dj_report->report_params[CMD_SWITCH_PARAM_TIMEOUT_SECONDS] = (u8)timeout;
+ retval = logi_dj_recv_send_report(djrcv_dev, dj_report);
+ kfree(dj_report);
+ return retval;
}
__set_bit(EV_ABS, input->evbit);
input_set_abs_params(input, ABS_MT_TRACKING_ID, 0, 15, 0, 0);
- input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 255, 4, 0);
- input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 255, 4, 0);
+ input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 255 << 2,
+ 4, 0);
+ input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 255 << 2,
+ 4, 0);
input_set_abs_params(input, ABS_MT_ORIENTATION, -31, 32, 1, 0);
/* Note: Touch Y position from the device is inverted relative
MT_USB_DEVICE(USB_VENDOR_ID_XIROKU,
USB_DEVICE_ID_XIROKU_CSR2) },
+ /* Zytronic panels */
+ { .driver_data = MT_CLS_SERIAL,
+ MT_USB_DEVICE(USB_VENDOR_ID_ZYTRONIC,
+ USB_DEVICE_ID_ZYTRONIC_ZXY100) },
+
/* Generic MT device */
{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_MULTITOUCH, HID_ANY_ID, HID_ANY_ID) },
{ }
-comment "USB Input Devices"
+menu "USB HID support"
depends on USB
config USB_HID
- tristate "USB Human Interface Device (full HID) support"
+ tristate "USB HID transport layer"
default y
depends on USB && INPUT
select HID
---help---
- Say Y here if you want full HID support to connect USB keyboards,
+ Say Y here if you want to connect USB keyboards,
mice, joysticks, graphic tablets, or any other HID based devices
to your computer via USB, as well as Uninterruptible Power Supply
(UPS) and monitor control devices.
endmenu
-
+endmenu
{ USB_VENDOR_ID_PRODIGE, USB_DEVICE_ID_PRODIGE_CORDLESS, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3008, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_SENNHEISER, USB_DEVICE_ID_SENNHEISER_BTD500USB, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_SYMBOL, USB_DEVICE_ID_SYMBOL_SCANNER_1, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_SYMBOL, USB_DEVICE_ID_SYMBOL_SCANNER_2, HID_QUIRK_NOGET },
*
* Based on hdaps.c driver:
* Copyright (C) 2005 Robert Love <rml@novell.com>
- * Copyright (C) 2005 Jesper Juhl <jesper.juhl@gmail.com>
+ * Copyright (C) 2005 Jesper Juhl <jj@chaosbits.net>
*
* Fan control based on smcFanControl:
* Copyright (C) 2006 Hendrik Holtmann <holtmann@mac.com>
int i;
if (send_command(cmd) || send_argument(key)) {
- pr_warn("%s: read arg fail\n", key);
+ pr_warn("%.4s: read arg fail\n", key);
return -EIO;
}
for (i = 0; i < len; i++) {
if (__wait_status(0x05)) {
- pr_warn("%s: read data fail\n", key);
+ pr_warn("%.4s: read data fail\n", key);
return -EIO;
}
buffer[i] = inb(APPLESMC_DATA_PORT);
return tdata->valid ? sprintf(buf, "%d\n", tdata->temp) : -EAGAIN;
}
+struct tjmax {
+ char const *id;
+ int tjmax;
+};
+
+static struct tjmax __cpuinitconst tjmax_table[] = {
+ { "CPU D410", 100000 },
+ { "CPU D425", 100000 },
+ { "CPU D510", 100000 },
+ { "CPU D525", 100000 },
+ { "CPU N450", 100000 },
+ { "CPU N455", 100000 },
+ { "CPU N470", 100000 },
+ { "CPU N475", 100000 },
+ { "CPU 230", 100000 },
+ { "CPU 330", 125000 },
+};
+
static int __cpuinit adjust_tjmax(struct cpuinfo_x86 *c, u32 id,
struct device *dev)
{
int err;
u32 eax, edx;
struct pci_dev *host_bridge;
+ int i;
+
+ /* explicit tjmax table entries override heuristics */
+ for (i = 0; i < ARRAY_SIZE(tjmax_table); i++) {
+ if (strstr(c->x86_model_id, tjmax_table[i].id))
+ return tjmax_table[i].tjmax;
+ }
/* Early chips have no MSR for TjMax */
/* Atom CPUs */
- if (c->x86_model == 0x1c) {
+ if (c->x86_model == 0x1c || c->x86_model == 0x26
+ || c->x86_model == 0x27) {
usemsr_ee = 0;
host_bridge = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
tjmax = 90000;
pci_dev_put(host_bridge);
+ } else if (c->x86_model == 0x36) {
+ usemsr_ee = 0;
+ tjmax = 100000;
}
if (c->x86_model > 0xe && usemsr_ee) {
* sensors. We check this bit only, all the early CPUs
* without thermal sensors will be filtered out.
*/
- if (!cpu_has(c, X86_FEATURE_DTS))
+ if (!cpu_has(c, X86_FEATURE_DTHERM))
return;
if (!pdev) {
};
static const struct x86_cpu_id coretemp_ids[] = {
- { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_DTS },
+ { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_DTHERM },
{}
};
MODULE_DEVICE_TABLE(x86cpu, coretemp_ids);
static int __init coretemp_init(void)
{
- int i, err = -ENODEV;
+ int i, err;
/*
* CPUID.06H.EAX[0] indicates whether the CPU has thermal
data->fan_rpm_control = true;
break;
default:
- mutex_unlock(&data->update_lock);
- return -EINVAL;
+ count = -EINVAL;
+ goto err;
}
- read_u8_from_i2c(client, REG_FAN_CONF1, &conf_reg);
+ result = read_u8_from_i2c(client, REG_FAN_CONF1, &conf_reg);
+ if (result) {
+ count = result;
+ goto err;
+ }
if (data->fan_rpm_control)
conf_reg |= 0x80;
conf_reg &= ~0x80;
i2c_smbus_write_byte_data(client, REG_FAN_CONF1, conf_reg);
-
+err:
mutex_unlock(&data->update_lock);
return count;
}
/* Start monitoring */
it87_write_value(data, IT87_REG_CONFIG,
- (it87_read_value(data, IT87_REG_CONFIG) & 0x36)
+ (it87_read_value(data, IT87_REG_CONFIG) & 0x3e)
| (update_vbat ? 0x41 : 0x01));
}
module_i2c_driver(jc42_driver);
-MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>");
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
MODULE_DESCRIPTION("JC42 driver");
MODULE_LICENSE("GPL");
module_i2c_driver(pem_driver);
-MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>");
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
MODULE_DESCRIPTION("Lineage CPL PEM hardware monitoring driver");
MODULE_LICENSE("GPL");
module_i2c_driver(ltc4261_driver);
-MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>");
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
MODULE_DESCRIPTION("LTC4261 driver");
MODULE_LICENSE("GPL");
module_i2c_driver(max16065_driver);
-MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>");
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
MODULE_DESCRIPTION("MAX16065 driver");
MODULE_LICENSE("GPL");
spin_lock_init(&hwlock->lock);
hwlock->bank = bank;
- ret = hwspin_lock_register_single(hwlock, i);
+ ret = hwspin_lock_register_single(hwlock, base_id + i);
if (ret)
goto reg_failed;
}
reg_failed:
while (--i >= 0)
- hwspin_lock_unregister_single(i);
+ hwspin_lock_unregister_single(base_id + i);
return ret;
}
EXPORT_SYMBOL_GPL(hwspin_lock_register);
This driver can also be built as a module. If so, the module
will be called i2c-mux-pca954x.
+config I2C_MUX_PINCTRL
+ tristate "pinctrl-based I2C multiplexer"
+ depends on PINCTRL
+ help
+ If you say yes to this option, support will be included for an I2C
+ multiplexer that uses the pinctrl subsystem, i.e. pin multiplexing.
+ This is useful for SoCs whose I2C module's signals can be routed to
+ different sets of pins at run-time.
+
+ This driver can also be built as a module. If so, the module will be
+ called pinctrl-i2cmux.
+
endmenu
obj-$(CONFIG_I2C_MUX_GPIO) += i2c-mux-gpio.o
obj-$(CONFIG_I2C_MUX_PCA9541) += i2c-mux-pca9541.o
obj-$(CONFIG_I2C_MUX_PCA954x) += i2c-mux-pca954x.o
+obj-$(CONFIG_I2C_MUX_PINCTRL) += i2c-mux-pinctrl.o
ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG
--- /dev/null
+/*
+ * I2C multiplexer using pinctrl API
+ *
+ * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of_i2c.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/i2c-mux-pinctrl.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+struct i2c_mux_pinctrl {
+ struct device *dev;
+ struct i2c_mux_pinctrl_platform_data *pdata;
+ struct pinctrl *pinctrl;
+ struct pinctrl_state **states;
+ struct pinctrl_state *state_idle;
+ struct i2c_adapter *parent;
+ struct i2c_adapter **busses;
+};
+
+static int i2c_mux_pinctrl_select(struct i2c_adapter *adap, void *data,
+ u32 chan)
+{
+ struct i2c_mux_pinctrl *mux = data;
+
+ return pinctrl_select_state(mux->pinctrl, mux->states[chan]);
+}
+
+static int i2c_mux_pinctrl_deselect(struct i2c_adapter *adap, void *data,
+ u32 chan)
+{
+ struct i2c_mux_pinctrl *mux = data;
+
+ return pinctrl_select_state(mux->pinctrl, mux->state_idle);
+}
+
+#ifdef CONFIG_OF
+static int i2c_mux_pinctrl_parse_dt(struct i2c_mux_pinctrl *mux,
+ struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ int num_names, i, ret;
+ struct device_node *adapter_np;
+ struct i2c_adapter *adapter;
+
+ if (!np)
+ return 0;
+
+ mux->pdata = devm_kzalloc(&pdev->dev, sizeof(*mux->pdata), GFP_KERNEL);
+ if (!mux->pdata) {
+ dev_err(mux->dev,
+ "Cannot allocate i2c_mux_pinctrl_platform_data\n");
+ return -ENOMEM;
+ }
+
+ num_names = of_property_count_strings(np, "pinctrl-names");
+ if (num_names < 0) {
+ dev_err(mux->dev, "Cannot parse pinctrl-names: %d\n",
+ num_names);
+ return num_names;
+ }
+
+ mux->pdata->pinctrl_states = devm_kzalloc(&pdev->dev,
+ sizeof(*mux->pdata->pinctrl_states) * num_names,
+ GFP_KERNEL);
+ if (!mux->pdata->pinctrl_states) {
+ dev_err(mux->dev, "Cannot allocate pinctrl_states\n");
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < num_names; i++) {
+ ret = of_property_read_string_index(np, "pinctrl-names", i,
+ &mux->pdata->pinctrl_states[mux->pdata->bus_count]);
+ if (ret < 0) {
+ dev_err(mux->dev, "Cannot parse pinctrl-names: %d\n",
+ ret);
+ return ret;
+ }
+ if (!strcmp(mux->pdata->pinctrl_states[mux->pdata->bus_count],
+ "idle")) {
+ if (i != num_names - 1) {
+ dev_err(mux->dev, "idle state must be last\n");
+ return -EINVAL;
+ }
+ mux->pdata->pinctrl_state_idle = "idle";
+ } else {
+ mux->pdata->bus_count++;
+ }
+ }
+
+ adapter_np = of_parse_phandle(np, "i2c-parent", 0);
+ if (!adapter_np) {
+ dev_err(mux->dev, "Cannot parse i2c-parent\n");
+ return -ENODEV;
+ }
+ adapter = of_find_i2c_adapter_by_node(adapter_np);
+ if (!adapter) {
+ dev_err(mux->dev, "Cannot find parent bus\n");
+ return -ENODEV;
+ }
+ mux->pdata->parent_bus_num = i2c_adapter_id(adapter);
+ put_device(&adapter->dev);
+
+ return 0;
+}
+#else
+static inline int i2c_mux_pinctrl_parse_dt(struct i2c_mux_pinctrl *mux,
+ struct platform_device *pdev)
+{
+ return 0;
+}
+#endif
+
+static int __devinit i2c_mux_pinctrl_probe(struct platform_device *pdev)
+{
+ struct i2c_mux_pinctrl *mux;
+ int (*deselect)(struct i2c_adapter *, void *, u32);
+ int i, ret;
+
+ mux = devm_kzalloc(&pdev->dev, sizeof(*mux), GFP_KERNEL);
+ if (!mux) {
+ dev_err(&pdev->dev, "Cannot allocate i2c_mux_pinctrl\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+ platform_set_drvdata(pdev, mux);
+
+ mux->dev = &pdev->dev;
+
+ mux->pdata = pdev->dev.platform_data;
+ if (!mux->pdata) {
+ ret = i2c_mux_pinctrl_parse_dt(mux, pdev);
+ if (ret < 0)
+ goto err;
+ }
+ if (!mux->pdata) {
+ dev_err(&pdev->dev, "Missing platform data\n");
+ ret = -ENODEV;
+ goto err;
+ }
+
+ mux->states = devm_kzalloc(&pdev->dev,
+ sizeof(*mux->states) * mux->pdata->bus_count,
+ GFP_KERNEL);
+ if (!mux->states) {
+ dev_err(&pdev->dev, "Cannot allocate states\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ mux->busses = devm_kzalloc(&pdev->dev,
+ sizeof(mux->busses) * mux->pdata->bus_count,
+ GFP_KERNEL);
+ if (!mux->states) {
+ dev_err(&pdev->dev, "Cannot allocate busses\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ mux->pinctrl = devm_pinctrl_get(&pdev->dev);
+ if (IS_ERR(mux->pinctrl)) {
+ ret = PTR_ERR(mux->pinctrl);
+ dev_err(&pdev->dev, "Cannot get pinctrl: %d\n", ret);
+ goto err;
+ }
+ for (i = 0; i < mux->pdata->bus_count; i++) {
+ mux->states[i] = pinctrl_lookup_state(mux->pinctrl,
+ mux->pdata->pinctrl_states[i]);
+ if (IS_ERR(mux->states[i])) {
+ ret = PTR_ERR(mux->states[i]);
+ dev_err(&pdev->dev,
+ "Cannot look up pinctrl state %s: %d\n",
+ mux->pdata->pinctrl_states[i], ret);
+ goto err;
+ }
+ }
+ if (mux->pdata->pinctrl_state_idle) {
+ mux->state_idle = pinctrl_lookup_state(mux->pinctrl,
+ mux->pdata->pinctrl_state_idle);
+ if (IS_ERR(mux->state_idle)) {
+ ret = PTR_ERR(mux->state_idle);
+ dev_err(&pdev->dev,
+ "Cannot look up pinctrl state %s: %d\n",
+ mux->pdata->pinctrl_state_idle, ret);
+ goto err;
+ }
+
+ deselect = i2c_mux_pinctrl_deselect;
+ } else {
+ deselect = NULL;
+ }
+
+ mux->parent = i2c_get_adapter(mux->pdata->parent_bus_num);
+ if (!mux->parent) {
+ dev_err(&pdev->dev, "Parent adapter (%d) not found\n",
+ mux->pdata->parent_bus_num);
+ ret = -ENODEV;
+ goto err;
+ }
+
+ for (i = 0; i < mux->pdata->bus_count; i++) {
+ u32 bus = mux->pdata->base_bus_num ?
+ (mux->pdata->base_bus_num + i) : 0;
+
+ mux->busses[i] = i2c_add_mux_adapter(mux->parent, &pdev->dev,
+ mux, bus, i,
+ i2c_mux_pinctrl_select,
+ deselect);
+ if (!mux->busses[i]) {
+ ret = -ENODEV;
+ dev_err(&pdev->dev, "Failed to add adapter %d\n", i);
+ goto err_del_adapter;
+ }
+ }
+
+ return 0;
+
+err_del_adapter:
+ for (; i > 0; i--)
+ i2c_del_mux_adapter(mux->busses[i - 1]);
+ i2c_put_adapter(mux->parent);
+err:
+ return ret;
+}
+
+static int __devexit i2c_mux_pinctrl_remove(struct platform_device *pdev)
+{
+ struct i2c_mux_pinctrl *mux = platform_get_drvdata(pdev);
+ int i;
+
+ for (i = 0; i < mux->pdata->bus_count; i++)
+ i2c_del_mux_adapter(mux->busses[i]);
+
+ i2c_put_adapter(mux->parent);
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id i2c_mux_pinctrl_of_match[] __devinitconst = {
+ { .compatible = "i2c-mux-pinctrl", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, i2c_mux_pinctrl_of_match);
+#endif
+
+static struct platform_driver i2c_mux_pinctrl_driver = {
+ .driver = {
+ .name = "i2c-mux-pinctrl",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(i2c_mux_pinctrl_of_match),
+ },
+ .probe = i2c_mux_pinctrl_probe,
+ .remove = __devexit_p(i2c_mux_pinctrl_remove),
+};
+module_platform_driver(i2c_mux_pinctrl_driver);
+
+MODULE_DESCRIPTION("pinctrl-based I2C multiplexer driver");
+MODULE_AUTHOR("Stephen Warren <swarren@nvidia.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:i2c-mux-pinctrl");
*/
static void icside_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
- unsigned long cycle_time;
+ unsigned long cycle_time = 0;
int use_dma_info = 0;
const u8 xfer_mode = drive->dma_mode;
ide_set_drivedata(drive, (void *)cycle_time);
- printk("%s: %s selected (peak %dMB/s)\n", drive->name,
- ide_xfer_verbose(xfer_mode),
- 2000 / (unsigned long)ide_get_drivedata(drive));
+ printk(KERN_INFO "%s: %s selected (peak %luMB/s)\n",
+ drive->name, ide_xfer_verbose(xfer_mode),
+ 2000 / (cycle_time ? cycle_time : (unsigned long) -1));
}
static const struct ide_port_ops icside_v6_port_ops = {
.dma_test_irq = icside_dma_test_irq,
.dma_lost_irq = ide_dma_lost_irq,
};
-#else
-#define icside_v6_dma_ops NULL
#endif
static int icside_dma_off_init(ide_hwif_t *hwif, const struct ide_port_info *d)
static const struct ide_port_info icside_v6_port_info __initdata = {
.init_dma = icside_dma_off_init,
.port_ops = &icside_v6_no_dma_port_ops,
- .dma_ops = &icside_v6_dma_ops,
.host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_MMIO,
.mwdma_mask = ATA_MWDMA2,
.swdma_mask = ATA_SWDMA2,
ecard_set_drvdata(ec, state);
+#ifdef CONFIG_BLK_DEV_IDEDMA_ICS
if (ec->dma != NO_DMA && !request_dma(ec->dma, DRV_NAME)) {
d.init_dma = icside_dma_init;
d.port_ops = &icside_v6_port_ops;
- } else
- d.dma_ops = NULL;
+ d.dma_ops = &icside_v6_dma_ops;
+ }
+#endif
ret = ide_host_register(host, &d, hws);
if (ret)
{
int *is_kme = priv_data;
- if (!(pdev->resource[0]->flags & IO_DATA_PATH_WIDTH_8)) {
+ if ((pdev->resource[0]->flags & IO_DATA_PATH_WIDTH)
+ != IO_DATA_PATH_WIDTH_8) {
pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
}
.enter = &intel_idle },
};
+static struct cpuidle_state ivb_cstates[MWAIT_MAX_NUM_CSTATES] = {
+ { /* MWAIT C0 */ },
+ { /* MWAIT C1 */
+ .name = "C1-IVB",
+ .desc = "MWAIT 0x00",
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 1,
+ .target_residency = 1,
+ .enter = &intel_idle },
+ { /* MWAIT C2 */
+ .name = "C3-IVB",
+ .desc = "MWAIT 0x10",
+ .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 59,
+ .target_residency = 156,
+ .enter = &intel_idle },
+ { /* MWAIT C3 */
+ .name = "C6-IVB",
+ .desc = "MWAIT 0x20",
+ .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 80,
+ .target_residency = 300,
+ .enter = &intel_idle },
+ { /* MWAIT C4 */
+ .name = "C7-IVB",
+ .desc = "MWAIT 0x30",
+ .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 87,
+ .target_residency = 300,
+ .enter = &intel_idle },
+};
+
static struct cpuidle_state atom_cstates[MWAIT_MAX_NUM_CSTATES] = {
{ /* MWAIT C0 */ },
{ /* MWAIT C1 */
.state_table = snb_cstates,
};
+static const struct idle_cpu idle_cpu_ivb = {
+ .state_table = ivb_cstates,
+};
+
#define ICPU(model, cpu) \
{ X86_VENDOR_INTEL, 6, model, X86_FEATURE_MWAIT, (unsigned long)&cpu }
ICPU(0x2f, idle_cpu_nehalem),
ICPU(0x2a, idle_cpu_snb),
ICPU(0x2d, idle_cpu_snb),
+ ICPU(0x3a, idle_cpu_ivb),
{}
};
MODULE_DEVICE_TABLE(x86cpu, intel_idle_ids);
help
The industrial I/O subsystem provides a unified framework for
drivers for many different types of embedded sensors using a
- number of different physical interfaces (i2c, spi, etc). See
- Documentation/iio for more information.
+ number of different physical interfaces (i2c, spi, etc).
if IIO
* New channel registration method - relies on the fact a group does
* not need to be initialized if it is name is NULL.
*/
- INIT_LIST_HEAD(&indio_dev->channel_attr_list);
if (indio_dev->channels)
for (i = 0; i < indio_dev->num_channels; i++) {
ret = iio_device_add_channel_sysfs(indio_dev,
static void iio_dev_release(struct device *device)
{
struct iio_dev *indio_dev = dev_to_iio_dev(device);
- cdev_del(&indio_dev->chrdev);
+ if (indio_dev->chrdev.dev)
+ cdev_del(&indio_dev->chrdev);
if (indio_dev->modes & INDIO_BUFFER_TRIGGERED)
iio_device_unregister_trigger_consumer(indio_dev);
iio_device_unregister_eventset(indio_dev);
iio_device_unregister_sysfs(indio_dev);
iio_device_unregister_debugfs(indio_dev);
+
+ ida_simple_remove(&iio_ida, indio_dev->id);
+ kfree(indio_dev);
}
static struct device_type iio_dev_type = {
dev_set_drvdata(&dev->dev, (void *)dev);
mutex_init(&dev->mlock);
mutex_init(&dev->info_exist_lock);
+ INIT_LIST_HEAD(&dev->channel_attr_list);
dev->id = ida_simple_get(&iio_ida, 0, 0, GFP_KERNEL);
if (dev->id < 0) {
void iio_device_free(struct iio_dev *dev)
{
- if (dev) {
- ida_simple_remove(&iio_ida, dev->id);
- kfree(dev);
- }
+ if (dev)
+ put_device(&dev->dev);
}
EXPORT_SYMBOL(iio_device_free);
mutex_lock(&indio_dev->info_exist_lock);
indio_dev->info = NULL;
mutex_unlock(&indio_dev->info_exist_lock);
- device_unregister(&indio_dev->dev);
+ device_del(&indio_dev->dev);
}
EXPORT_SYMBOL(iio_device_unregister);
subsys_initcall(iio_init);
static int cma_check_req_qp_type(struct rdma_cm_id *id, struct ib_cm_event *ib_event)
{
- return (((ib_event->event == IB_CM_REQ_RECEIVED) ||
+ return (((ib_event->event == IB_CM_REQ_RECEIVED) &&
(ib_event->param.req_rcvd.qp_type == id->qp_type)) ||
((ib_event->event == IB_CM_SIDR_REQ_RECEIVED) &&
(id->qp_type == IB_QPT_UD)) ||
struct net_device *pdev;
pdev = ip_dev_find(&init_net, peer_ip);
+ if (!pdev) {
+ err = -ENODEV;
+ goto out;
+ }
ep->l2t = cxgb4_l2t_get(cdev->rdev.lldi.l2t,
n, pdev, 0);
if (!ep->l2t)
props->max_mr_size = ~0ull;
props->page_size_cap = dev->dev->caps.page_size_cap;
props->max_qp = dev->dev->caps.num_qps - dev->dev->caps.reserved_qps;
- props->max_qp_wr = dev->dev->caps.max_wqes;
+ props->max_qp_wr = dev->dev->caps.max_wqes - MLX4_IB_SQ_MAX_SPARE;
props->max_sge = min(dev->dev->caps.max_sq_sg,
dev->dev->caps.max_rq_sg);
props->max_cq = dev->dev->caps.num_cqs - dev->dev->caps.reserved_cqs;
int total_eqs = 0;
int i, j, eq;
- /* Init eq table */
- ibdev->eq_table = NULL;
- ibdev->eq_added = 0;
-
- /* Legacy mode? */
- if (dev->caps.comp_pool == 0)
+ /* Legacy mode or comp_pool is not large enough */
+ if (dev->caps.comp_pool == 0 ||
+ dev->caps.num_ports > dev->caps.comp_pool)
return;
eq_per_port = rounddown_pow_of_two(dev->caps.comp_pool/
static void mlx4_ib_free_eqs(struct mlx4_dev *dev, struct mlx4_ib_dev *ibdev)
{
int i;
- int total_eqs;
+
+ /* no additional eqs were added */
+ if (!ibdev->eq_table)
+ return;
/* Reset the advertised EQ number */
ibdev->ib_dev.num_comp_vectors = dev->caps.num_comp_vectors;
mlx4_release_eq(dev, ibdev->eq_table[i]);
}
- total_eqs = dev->caps.num_comp_vectors + ibdev->eq_added;
- memset(ibdev->eq_table, 0, total_eqs * sizeof(int));
kfree(ibdev->eq_table);
-
- ibdev->eq_table = NULL;
- ibdev->eq_added = 0;
}
static void *mlx4_ib_add(struct mlx4_dev *dev)
#include <linux/mlx4/device.h>
#include <linux/mlx4/doorbell.h>
+enum {
+ MLX4_IB_SQ_MIN_WQE_SHIFT = 6,
+ MLX4_IB_MAX_HEADROOM = 2048
+};
+
+#define MLX4_IB_SQ_HEADROOM(shift) ((MLX4_IB_MAX_HEADROOM >> (shift)) + 1)
+#define MLX4_IB_SQ_MAX_SPARE (MLX4_IB_SQ_HEADROOM(MLX4_IB_SQ_MIN_WQE_SHIFT))
+
struct mlx4_ib_ucontext {
struct ib_ucontext ibucontext;
struct mlx4_uar uar;
int is_user, int has_rq, struct mlx4_ib_qp *qp)
{
/* Sanity check RQ size before proceeding */
- if (cap->max_recv_wr > dev->dev->caps.max_wqes ||
- cap->max_recv_sge > dev->dev->caps.max_rq_sg)
+ if (cap->max_recv_wr > dev->dev->caps.max_wqes - MLX4_IB_SQ_MAX_SPARE ||
+ cap->max_recv_sge > min(dev->dev->caps.max_sq_sg, dev->dev->caps.max_rq_sg))
return -EINVAL;
if (!has_rq) {
qp->rq.wqe_shift = ilog2(qp->rq.max_gs * sizeof (struct mlx4_wqe_data_seg));
}
- cap->max_recv_wr = qp->rq.max_post = qp->rq.wqe_cnt;
- cap->max_recv_sge = qp->rq.max_gs;
+ /* leave userspace return values as they were, so as not to break ABI */
+ if (is_user) {
+ cap->max_recv_wr = qp->rq.max_post = qp->rq.wqe_cnt;
+ cap->max_recv_sge = qp->rq.max_gs;
+ } else {
+ cap->max_recv_wr = qp->rq.max_post =
+ min(dev->dev->caps.max_wqes - MLX4_IB_SQ_MAX_SPARE, qp->rq.wqe_cnt);
+ cap->max_recv_sge = min(qp->rq.max_gs,
+ min(dev->dev->caps.max_sq_sg,
+ dev->dev->caps.max_rq_sg));
+ }
return 0;
}
int s;
/* Sanity check SQ size before proceeding */
- if (cap->max_send_wr > dev->dev->caps.max_wqes ||
- cap->max_send_sge > dev->dev->caps.max_sq_sg ||
+ if (cap->max_send_wr > (dev->dev->caps.max_wqes - MLX4_IB_SQ_MAX_SPARE) ||
+ cap->max_send_sge > min(dev->dev->caps.max_sq_sg, dev->dev->caps.max_rq_sg) ||
cap->max_inline_data + send_wqe_overhead(type, qp->flags) +
sizeof (struct mlx4_wqe_inline_seg) > dev->dev->caps.max_sq_desc_sz)
return -EINVAL;
u32 max_inline_data;
int max_send_sge;
int max_recv_sge;
+ int max_srq_sge;
int max_mr;
u64 max_mr_size;
u32 max_num_mr_pbl;
u32 entry_size;
u32 max_cnt;
u32 max_wqe_idx;
- u32 free_delta;
u16 dbid; /* qid, where to ring the doorbell. */
u32 len;
dma_addr_t pa;
u32 rsvd1;
u32 num_wqe_allocated;
u32 num_rqe_allocated;
- u32 free_wqe_delta;
- u32 free_rqe_delta;
u32 db_sq_offset;
u32 db_rq_offset;
u32 db_shift;
u32 db_rq_offset;
u32 db_shift;
- u32 free_rqe_delta;
- u32 rsvd2;
+ u64 rsvd2;
u64 rsvd3;
} __packed;
break;
case OCRDMA_SRQ_LIMIT_EVENT:
ib_evt.element.srq = &qp->srq->ibsrq;
- ib_evt.event = IB_EVENT_QP_LAST_WQE_REACHED;
+ ib_evt.event = IB_EVENT_SRQ_LIMIT_REACHED;
srq_event = 1;
qp_event = 0;
break;
struct ocrdma_dev_attr *attr,
struct ocrdma_mbx_query_config *rsp)
{
- int max_q_mem;
-
attr->max_pd =
(rsp->max_pd_ca_ack_delay & OCRDMA_MBX_QUERY_CFG_MAX_PD_MASK) >>
OCRDMA_MBX_QUERY_CFG_MAX_PD_SHIFT;
attr->max_recv_sge = (rsp->max_write_send_sge &
OCRDMA_MBX_QUERY_CFG_MAX_SEND_SGE_MASK) >>
OCRDMA_MBX_QUERY_CFG_MAX_SEND_SGE_SHIFT;
+ attr->max_srq_sge = (rsp->max_srq_rqe_sge &
+ OCRDMA_MBX_QUERY_CFG_MAX_SRQ_SGE_MASK) >>
+ OCRDMA_MBX_QUERY_CFG_MAX_SRQ_SGE_OFFSET;
attr->max_ord_per_qp = (rsp->max_ird_ord_per_qp &
OCRDMA_MBX_QUERY_CFG_MAX_ORD_PER_QP_MASK) >>
OCRDMA_MBX_QUERY_CFG_MAX_ORD_PER_QP_SHIFT;
attr->max_inline_data =
attr->wqe_size - (sizeof(struct ocrdma_hdr_wqe) +
sizeof(struct ocrdma_sge));
- max_q_mem = OCRDMA_Q_PAGE_BASE_SIZE << (OCRDMA_MAX_Q_PAGE_SIZE_CNT - 1);
- /* hw can queue one less then the configured size,
- * so publish less by one to stack.
- */
if (dev->nic_info.dev_family == OCRDMA_GEN2_FAMILY) {
- dev->attr.max_wqe = max_q_mem / dev->attr.wqe_size;
attr->ird = 1;
attr->ird_page_size = OCRDMA_MIN_Q_PAGE_SIZE;
attr->num_ird_pages = MAX_OCRDMA_IRD_PAGES;
- } else
- dev->attr.max_wqe = (max_q_mem / dev->attr.wqe_size) - 1;
- dev->attr.max_rqe = (max_q_mem / dev->attr.rqe_size) - 1;
+ }
+ dev->attr.max_wqe = rsp->max_wqes_rqes_per_q >>
+ OCRDMA_MBX_QUERY_CFG_MAX_WQES_PER_WQ_OFFSET;
+ dev->attr.max_rqe = rsp->max_wqes_rqes_per_q &
+ OCRDMA_MBX_QUERY_CFG_MAX_RQES_PER_RQ_MASK;
}
static int ocrdma_check_fw_config(struct ocrdma_dev *dev,
max_wqe_allocated = 1 << max_wqe_allocated;
max_rqe_allocated = 1 << ((u16)rsp->max_wqe_rqe);
- if (qp->dev->nic_info.dev_family == OCRDMA_GEN2_FAMILY) {
- qp->sq.free_delta = 0;
- qp->rq.free_delta = 1;
- } else
- qp->sq.free_delta = 1;
-
qp->sq.max_cnt = max_wqe_allocated;
qp->sq.max_wqe_idx = max_wqe_allocated - 1;
if (!attrs->srq) {
qp->rq.max_cnt = max_rqe_allocated;
qp->rq.max_wqe_idx = max_rqe_allocated - 1;
- qp->rq.free_delta = 1;
}
}
*******************************************************************/
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/idr.h>
#include <rdma/ib_verbs.h>
#include <rdma/ib_user_verbs.h>
sgid->raw[15] = mac_addr[5];
}
-static void ocrdma_add_sgid(struct ocrdma_dev *dev, unsigned char *mac_addr,
+static bool ocrdma_add_sgid(struct ocrdma_dev *dev, unsigned char *mac_addr,
bool is_vlan, u16 vlan_id)
{
int i;
- bool found = false;
union ib_gid new_sgid;
- int free_idx = OCRDMA_MAX_SGID;
unsigned long flags;
memset(&ocrdma_zero_sgid, 0, sizeof(union ib_gid));
if (!memcmp(&dev->sgid_tbl[i], &ocrdma_zero_sgid,
sizeof(union ib_gid))) {
/* found free entry */
- if (!found) {
- free_idx = i;
- found = true;
- break;
- }
+ memcpy(&dev->sgid_tbl[i], &new_sgid,
+ sizeof(union ib_gid));
+ spin_unlock_irqrestore(&dev->sgid_lock, flags);
+ return true;
} else if (!memcmp(&dev->sgid_tbl[i], &new_sgid,
sizeof(union ib_gid))) {
/* entry already present, no addition is required. */
spin_unlock_irqrestore(&dev->sgid_lock, flags);
- return;
+ return false;
}
}
- /* if entry doesn't exist and if table has some space, add entry */
- if (found)
- memcpy(&dev->sgid_tbl[free_idx], &new_sgid,
- sizeof(union ib_gid));
spin_unlock_irqrestore(&dev->sgid_lock, flags);
+ return false;
}
static bool ocrdma_del_sgid(struct ocrdma_dev *dev, unsigned char *mac_addr,
ocrdma_get_guid(dev, &sgid->raw[8]);
}
-static int ocrdma_build_sgid_tbl(struct ocrdma_dev *dev)
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
+static void ocrdma_add_vlan_sgids(struct ocrdma_dev *dev)
{
struct net_device *netdev, *tmp;
u16 vlan_id;
netdev = dev->nic_info.netdev;
- ocrdma_add_default_sgid(dev);
-
rcu_read_lock();
for_each_netdev_rcu(&init_net, tmp) {
if (netdev == tmp || vlan_dev_real_dev(tmp) == netdev) {
}
}
rcu_read_unlock();
+}
+#else
+static void ocrdma_add_vlan_sgids(struct ocrdma_dev *dev)
+{
+
+}
+#endif /* VLAN */
+
+static int ocrdma_build_sgid_tbl(struct ocrdma_dev *dev)
+{
+ ocrdma_add_default_sgid(dev);
+ ocrdma_add_vlan_sgids(dev);
return 0;
}
-#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) || \
+defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
static int ocrdma_inet6addr_event(struct notifier_block *notifier,
unsigned long event, void *ptr)
struct ib_event gid_event;
struct ocrdma_dev *dev;
bool found = false;
+ bool updated = false;
bool is_vlan = false;
u16 vid = 0;
mutex_lock(&dev->dev_lock);
switch (event) {
case NETDEV_UP:
- ocrdma_add_sgid(dev, netdev->dev_addr, is_vlan, vid);
+ updated = ocrdma_add_sgid(dev, netdev->dev_addr, is_vlan, vid);
break;
case NETDEV_DOWN:
- found = ocrdma_del_sgid(dev, netdev->dev_addr, is_vlan, vid);
- if (found) {
- /* found the matching entry, notify
- * the consumers about it
- */
- gid_event.device = &dev->ibdev;
- gid_event.element.port_num = 1;
- gid_event.event = IB_EVENT_GID_CHANGE;
- ib_dispatch_event(&gid_event);
- }
+ updated = ocrdma_del_sgid(dev, netdev->dev_addr, is_vlan, vid);
break;
default:
break;
}
+ if (updated) {
+ /* GID table updated, notify the consumers about it */
+ gid_event.device = &dev->ibdev;
+ gid_event.element.port_num = 1;
+ gid_event.event = IB_EVENT_GID_CHANGE;
+ ib_dispatch_event(&gid_event);
+ }
mutex_unlock(&dev->dev_lock);
return NOTIFY_OK;
}
.notifier_call = ocrdma_inet6addr_event
};
-#endif /* IPV6 */
+#endif /* IPV6 and VLAN */
static enum rdma_link_layer ocrdma_link_layer(struct ib_device *device,
u8 port_num)
OCRDMA_MBX_QUERY_CFG_MAX_SEND_SGE_SHIFT = 0,
OCRDMA_MBX_QUERY_CFG_MAX_SEND_SGE_MASK = 0xFFFF,
+ OCRDMA_MBX_QUERY_CFG_MAX_WRITE_SGE_SHIFT = 16,
+ OCRDMA_MBX_QUERY_CFG_MAX_WRITE_SGE_MASK = 0xFFFF <<
+ OCRDMA_MBX_QUERY_CFG_MAX_WRITE_SGE_SHIFT,
OCRDMA_MBX_QUERY_CFG_MAX_ORD_PER_QP_SHIFT = 0,
OCRDMA_MBX_QUERY_CFG_MAX_ORD_PER_QP_MASK = 0xFFFF,
OCRDMA_MBX_QUERY_CFG_MAX_WQES_PER_WQ_OFFSET,
OCRDMA_MBX_QUERY_CFG_MAX_RQES_PER_RQ_OFFSET = 0,
OCRDMA_MBX_QUERY_CFG_MAX_RQES_PER_RQ_MASK = 0xFFFF <<
- OCRDMA_MBX_QUERY_CFG_MAX_WQES_PER_WQ_OFFSET,
+ OCRDMA_MBX_QUERY_CFG_MAX_RQES_PER_RQ_OFFSET,
OCRDMA_MBX_QUERY_CFG_MAX_CQ_OFFSET = 16,
OCRDMA_MBX_QUERY_CFG_MAX_CQ_MASK = 0xFFFF <<
dev = get_ocrdma_dev(ibdev);
memset(sgid, 0, sizeof(*sgid));
- if (index > OCRDMA_MAX_SGID)
+ if (index >= OCRDMA_MAX_SGID)
return -EINVAL;
memcpy(sgid, &dev->sgid_tbl[index], sizeof(*sgid));
IB_DEVICE_SHUTDOWN_PORT |
IB_DEVICE_SYS_IMAGE_GUID |
IB_DEVICE_LOCAL_DMA_LKEY;
- attr->max_sge = dev->attr.max_send_sge;
- attr->max_sge_rd = dev->attr.max_send_sge;
+ attr->max_sge = min(dev->attr.max_send_sge, dev->attr.max_srq_sge);
+ attr->max_sge_rd = 0;
attr->max_cq = dev->attr.max_cq;
attr->max_cqe = dev->attr.max_cqe;
attr->max_mr = dev->attr.max_mr;
min(dev->attr.max_ord_per_qp, dev->attr.max_ird_per_qp);
attr->max_qp_init_rd_atom = dev->attr.max_ord_per_qp;
attr->max_srq = (dev->attr.max_qp - 1);
- attr->max_srq_sge = attr->max_sge;
+ attr->max_srq_sge = attr->max_srq_sge;
attr->max_srq_wr = dev->attr.max_rqe;
attr->local_ca_ack_delay = dev->attr.local_ca_ack_delay;
attr->max_fast_reg_page_list_len = 0;
uresp.db_rq_offset = OCRDMA_DB_RQ_OFFSET;
uresp.db_shift = 16;
}
- uresp.free_wqe_delta = qp->sq.free_delta;
- uresp.free_rqe_delta = qp->rq.free_delta;
if (qp->dpp_enabled) {
uresp.dpp_credit = dpp_credit_lmt;
free_cnt = (q->max_cnt - q->head) + q->tail;
else
free_cnt = q->tail - q->head;
- if (q->free_delta)
- free_cnt -= q->free_delta;
return free_cnt;
}
(srq->pd->id * srq->dev->nic_info.db_page_size);
uresp.db_page_size = srq->dev->nic_info.db_page_size;
uresp.num_rqe_allocated = srq->rq.max_cnt;
- uresp.free_rqe_delta = 1;
if (srq->dev->nic_info.dev_family == OCRDMA_GEN2_FAMILY) {
uresp.db_rq_offset = OCRDMA_DB_GEN2_RQ1_OFFSET;
uresp.db_shift = 24;
*stop = true;
expand = false;
}
- } else
+ } else {
+ *polled = true;
expand = ocrdma_update_err_rcqe(ibwc, cqe, qp, status);
+ }
return expand;
}
#ifndef __OCRDMA_VERBS_H__
#define __OCRDMA_VERBS_H__
-#include <linux/version.h>
int ocrdma_post_send(struct ib_qp *, struct ib_send_wr *,
struct ib_send_wr **bad_wr);
int ocrdma_post_recv(struct ib_qp *, struct ib_recv_wr *,
skb_frag_size_set(frag, size);
skb->data_len += size;
- skb->truesize += size;
+ skb->truesize += PAGE_SIZE;
} else
skb_put(skb, length);
struct ipoib_dev_priv *priv = netdev_priv(dev);
struct sk_buff *skb;
int buf_size;
+ int tailroom;
u64 *mapping;
- if (ipoib_ud_need_sg(priv->max_ib_mtu))
+ if (ipoib_ud_need_sg(priv->max_ib_mtu)) {
buf_size = IPOIB_UD_HEAD_SIZE;
- else
+ tailroom = 128; /* reserve some tailroom for IP/TCP headers */
+ } else {
buf_size = IPOIB_UD_BUF_SIZE(priv->max_ib_mtu);
+ tailroom = 0;
+ }
- skb = dev_alloc_skb(buf_size + 4);
+ skb = dev_alloc_skb(buf_size + tailroom + 4);
if (unlikely(!skb))
return NULL;
error = request_threaded_irq(as5011->button_irq,
NULL, as5011_button_interrupt,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
"as5011_button", as5011);
if (error < 0) {
dev_err(&client->dev,
error = request_threaded_irq(as5011->axis_irq, NULL,
as5011_axis_interrupt,
- plat_data->axis_irqflags,
+ plat_data->axis_irqflags | IRQF_ONESHOT,
"as5011_joystick", as5011);
if (error) {
dev_err(&client->dev,
{ 0x0c12, 0x880a, "Pelican Eclipse PL-2023", 0, XTYPE_XBOX },
{ 0x0c12, 0x8810, "Zeroplus Xbox Controller", 0, XTYPE_XBOX },
{ 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", 0, XTYPE_XBOX },
+ { 0x0d2f, 0x0002, "Andamiro Pump It Up pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x0e4c, 0x1097, "Radica Gamester Controller", 0, XTYPE_XBOX },
{ 0x0e4c, 0x2390, "Radica Games Jtech Controller", 0, XTYPE_XBOX },
{ 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", 0, XTYPE_XBOX },
{ 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0f0d, 0x0016, "Hori Real Arcade Pro.EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0f0d, 0x000d, "Hori Fighting Stick EX2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1689, 0xfd00, "Razer Onza Tournament Edition", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
{ 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX },
{ 0x0000, 0x0000, "Generic X-Box pad", 0, XTYPE_UNKNOWN }
};
XPAD_XBOX360_VENDOR(0x045e), /* Microsoft X-Box 360 controllers */
XPAD_XBOX360_VENDOR(0x046d), /* Logitech X-Box 360 style controllers */
XPAD_XBOX360_VENDOR(0x0738), /* Mad Catz X-Box 360 controllers */
+ { USB_DEVICE(0x0738, 0x4540) }, /* Mad Catz Beat Pad */
XPAD_XBOX360_VENDOR(0x0e6f), /* 0x0e6f X-Box 360 controllers */
XPAD_XBOX360_VENDOR(0x12ab), /* X-Box 360 dance pads */
XPAD_XBOX360_VENDOR(0x1430), /* RedOctane X-Box 360 controllers */
XPAD_XBOX360_VENDOR(0x146b), /* BigBen Interactive Controllers */
XPAD_XBOX360_VENDOR(0x1bad), /* Harminix Rock Band Guitar and Drums */
- XPAD_XBOX360_VENDOR(0x0f0d), /* Hori Controllers */
+ XPAD_XBOX360_VENDOR(0x0f0d), /* Hori Controllers */
+ XPAD_XBOX360_VENDOR(0x1689), /* Razer Onza */
{ }
};
}
error = request_threaded_irq(client->irq, NULL, mcs_touchkey_interrupt,
- IRQF_TRIGGER_FALLING, client->dev.driver->name, data);
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ client->dev.driver->name, data);
if (error) {
dev_err(&client->dev, "Failed to register interrupt\n");
goto err_free_mem;
error = request_threaded_irq(client->irq, NULL,
mpr_touchkey_interrupt,
- IRQF_TRIGGER_FALLING,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
client->dev.driver->name, mpr121);
if (error) {
dev_err(&client->dev, "Failed to register interrupt\n");
msleep(QT1070_RESET_TIME);
err = request_threaded_irq(client->irq, NULL, qt1070_interrupt,
- IRQF_TRIGGER_NONE, client->dev.driver->name, data);
+ IRQF_TRIGGER_NONE | IRQF_ONESHOT,
+ client->dev.driver->name, data);
if (err) {
dev_err(&client->dev, "fail to request irq\n");
goto err_free_mem;
error = request_threaded_irq(chip->irqnum, NULL,
tca6416_keys_isr,
- IRQF_TRIGGER_FALLING,
+ IRQF_TRIGGER_FALLING |
+ IRQF_ONESHOT,
"tca6416-keypad", chip);
if (error) {
dev_dbg(&client->dev,
client->irq = gpio_to_irq(client->irq);
error = request_threaded_irq(client->irq, NULL, tca8418_irq_handler,
- IRQF_TRIGGER_FALLING,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
client->name, keypad_data);
if (error) {
dev_dbg(&client->dev,
goto error_clk;
}
- error = request_threaded_irq(kp->irq_press, NULL, keypad_irq, 0,
- dev_name(dev), kp);
+ error = request_threaded_irq(kp->irq_press, NULL, keypad_irq,
+ IRQF_ONESHOT, dev_name(dev), kp);
if (error < 0) {
dev_err(kp->dev, "Could not allocate keypad press key irq\n");
goto error_irq_press;
}
- error = request_threaded_irq(kp->irq_release, NULL, keypad_irq, 0,
- dev_name(dev), kp);
+ error = request_threaded_irq(kp->irq_release, NULL, keypad_irq,
+ IRQF_ONESHOT, dev_name(dev), kp);
if (error < 0) {
dev_err(kp->dev, "Could not allocate keypad release key irq\n");
goto error_irq_release;
struct ad714x_platform_data *plat_data = dev->platform_data;
struct ad714x_chip *ad714x;
void *drv_mem;
+ unsigned long irqflags;
struct ad714x_button_drv *bt_drv;
struct ad714x_slider_drv *sd_drv;
alloc_idx++;
}
+ irqflags = plat_data->irqflags ?: IRQF_TRIGGER_FALLING;
+ irqflags |= IRQF_ONESHOT;
+
error = request_threaded_irq(ad714x->irq, NULL, ad714x_interrupt_thread,
- plat_data->irqflags ?
- plat_data->irqflags : IRQF_TRIGGER_FALLING,
- "ad714x_captouch", ad714x);
+ irqflags, "ad714x_captouch", ad714x);
if (error) {
dev_err(dev, "can't allocate irq %d\n", ad714x->irq);
goto err_unreg_dev;
/* REVISIT: flush the event queue? */
status = request_threaded_irq(keys->irq, NULL, dm355evm_keys_irq,
- IRQF_TRIGGER_FALLING, dev_name(&pdev->dev), keys);
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ dev_name(&pdev->dev), keys);
if (status < 0)
goto fail2;
#define USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI 0x0252
#define USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO 0x0253
#define USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS 0x0254
+/* MacbookPro10,1 (unibody, June 2012) */
+#define USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI 0x0262
+#define USB_DEVICE_ID_APPLE_WELLSPRING7_ISO 0x0263
+#define USB_DEVICE_ID_APPLE_WELLSPRING7_JIS 0x0264
#define BCM5974_DEVICE(prod) { \
.match_flags = (USB_DEVICE_ID_MATCH_DEVICE | \
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI),
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO),
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS),
+ /* MacbookPro10,1 */
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_ISO),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_JIS),
/* Terminating entry */
{}
};
{ DIM_X, DIM_X / SN_COORD, -4620, 5140 },
{ DIM_Y, DIM_Y / SN_COORD, -150, 6600 }
},
+ {
+ USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI,
+ USB_DEVICE_ID_APPLE_WELLSPRING7_ISO,
+ USB_DEVICE_ID_APPLE_WELLSPRING7_JIS,
+ HAS_INTEGRATED_BUTTON,
+ 0x84, sizeof(struct bt_data),
+ 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS,
+ { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 },
+ { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+ { DIM_X, DIM_X / SN_COORD, -4750, 5280 },
+ { DIM_Y, DIM_Y / SN_COORD, -150, 6730 }
+ },
{}
};
rep_data[0] = 12;
result = wacom_get_report(intf, WAC_HID_FEATURE_REPORT,
- rep_data[0], &rep_data, 2,
+ rep_data[0], rep_data, 2,
WAC_MSG_RETRIES);
if (result >= 0 && rep_data[1] > 2)
break;
case HID_USAGE_CONTACTMAX:
- wacom_retrieve_report_data(intf, features);
+ /* leave touch_max as is if predefined */
+ if (!features->touch_max)
+ wacom_retrieve_report_data(intf, features);
i++;
break;
}
AD7879_TMR(ts->pen_down_acc_interval);
err = request_threaded_irq(ts->irq, NULL, ad7879_irq,
- IRQF_TRIGGER_FALLING,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
dev_name(dev), ts);
if (err) {
dev_err(dev, "irq %d busy?\n", ts->irq);
goto err_free_object;
error = request_threaded_irq(client->irq, NULL, mxt_interrupt,
- pdata->irqflags, client->dev.driver->name, data);
+ pdata->irqflags | IRQF_ONESHOT,
+ client->dev.driver->name, data);
if (error) {
dev_err(&client->dev, "Failed to register interrupt\n");
goto err_free_object;
input_set_drvdata(in_dev, bu21013_data);
error = request_threaded_irq(pdata->irq, NULL, bu21013_gpio_irq,
- IRQF_TRIGGER_FALLING | IRQF_SHARED,
+ IRQF_TRIGGER_FALLING | IRQF_SHARED |
+ IRQF_ONESHOT,
DRIVER_TP, bu21013_data);
if (error) {
dev_err(&client->dev, "request irq %d failed\n", pdata->irq);
}
err = request_threaded_irq(client->irq, NULL, cy8ctmg110_irq_thread,
- IRQF_TRIGGER_RISING, "touch_reset_key", ts);
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ "touch_reset_key", ts);
if (err < 0) {
dev_err(&client->dev,
"irq %d busy? error %d\n", client->irq, err);
MRST_PRESSURE_MIN, MRST_PRESSURE_MAX, 0, 0);
err = request_threaded_irq(tsdev->irq, NULL, mrstouch_pendet_irq,
- 0, "mrstouch", tsdev);
+ IRQF_ONESHOT, "mrstouch", tsdev);
if (err) {
dev_err(tsdev->dev, "unable to allocate irq\n");
goto err_free_mem;
input_set_drvdata(input, tsdata);
error = request_threaded_irq(client->irq, NULL, pixcir_ts_isr,
- IRQF_TRIGGER_FALLING,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
client->name, tsdata);
if (error) {
dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
goto error_clk;
}
- error = request_threaded_irq(ts->tsc_irq, NULL, tsc_irq, 0,
+ error = request_threaded_irq(ts->tsc_irq, NULL, tsc_irq, IRQF_ONESHOT,
dev_name(dev), ts);
if (error < 0) {
dev_err(ts->dev, "Could not allocate ts irq\n");
tsc2005_stop_scan(ts);
error = request_threaded_irq(spi->irq, NULL, tsc2005_irq_thread,
- IRQF_TRIGGER_RISING, "tsc2005", ts);
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ "tsc2005", ts);
if (error) {
dev_err(&spi->dev, "Failed to request irq, err: %d\n", error);
goto err_free_mem;
static ATOMIC_NOTIFIER_HEAD(ppr_notifier);
int amd_iommu_max_glx_val = -1;
+static struct dma_map_ops amd_iommu_dma_ops;
+
/*
* general struct to manage commands send to an IOMMU
*/
return;
de_fflush = debugfs_create_bool("fullflush", 0444, stats_dir,
- (u32 *)&amd_iommu_unmap_flush);
+ &amd_iommu_unmap_flush);
amd_iommu_stats_add(&compl_wait);
amd_iommu_stats_add(&cnt_map_single);
spin_unlock_irqrestore(&iommu->lock, flags);
}
-static void iommu_handle_ppr_entry(struct amd_iommu *iommu, u32 head)
+static void iommu_handle_ppr_entry(struct amd_iommu *iommu, u64 *raw)
{
struct amd_iommu_fault fault;
- volatile u64 *raw;
- int i;
INC_STATS_COUNTER(pri_requests);
- raw = (u64 *)(iommu->ppr_log + head);
-
- /*
- * Hardware bug: Interrupt may arrive before the entry is written to
- * memory. If this happens we need to wait for the entry to arrive.
- */
- for (i = 0; i < LOOP_TIMEOUT; ++i) {
- if (PPR_REQ_TYPE(raw[0]) != 0)
- break;
- udelay(1);
- }
-
if (PPR_REQ_TYPE(raw[0]) != PPR_REQ_FAULT) {
pr_err_ratelimited("AMD-Vi: Unknown PPR request received\n");
return;
fault.tag = PPR_TAG(raw[0]);
fault.flags = PPR_FLAGS(raw[0]);
- /*
- * To detect the hardware bug we need to clear the entry
- * to back to zero.
- */
- raw[0] = raw[1] = 0;
-
atomic_notifier_call_chain(&ppr_notifier, 0, &fault);
}
if (iommu->ppr_log == NULL)
return;
+ /* enable ppr interrupts again */
+ writel(MMIO_STATUS_PPR_INT_MASK, iommu->mmio_base + MMIO_STATUS_OFFSET);
+
spin_lock_irqsave(&iommu->lock, flags);
head = readl(iommu->mmio_base + MMIO_PPR_HEAD_OFFSET);
tail = readl(iommu->mmio_base + MMIO_PPR_TAIL_OFFSET);
while (head != tail) {
+ volatile u64 *raw;
+ u64 entry[2];
+ int i;
- /* Handle PPR entry */
- iommu_handle_ppr_entry(iommu, head);
+ raw = (u64 *)(iommu->ppr_log + head);
+
+ /*
+ * Hardware bug: Interrupt may arrive before the entry is
+ * written to memory. If this happens we need to wait for the
+ * entry to arrive.
+ */
+ for (i = 0; i < LOOP_TIMEOUT; ++i) {
+ if (PPR_REQ_TYPE(raw[0]) != 0)
+ break;
+ udelay(1);
+ }
- /* Update and refresh ring-buffer state*/
+ /* Avoid memcpy function-call overhead */
+ entry[0] = raw[0];
+ entry[1] = raw[1];
+
+ /*
+ * To detect the hardware bug we need to clear the entry
+ * back to zero.
+ */
+ raw[0] = raw[1] = 0UL;
+
+ /* Update head pointer of hardware ring-buffer */
head = (head + PPR_ENTRY_SIZE) % PPR_LOG_SIZE;
writel(head, iommu->mmio_base + MMIO_PPR_HEAD_OFFSET);
+
+ /*
+ * Release iommu->lock because ppr-handling might need to
+ * re-aquire it
+ */
+ spin_unlock_irqrestore(&iommu->lock, flags);
+
+ /* Handle PPR entry */
+ iommu_handle_ppr_entry(iommu, entry);
+
+ spin_lock_irqsave(&iommu->lock, flags);
+
+ /* Refresh ring-buffer information */
+ head = readl(iommu->mmio_base + MMIO_PPR_HEAD_OFFSET);
tail = readl(iommu->mmio_base + MMIO_PPR_TAIL_OFFSET);
}
- /* enable ppr interrupts again */
- writel(MMIO_STATUS_PPR_INT_MASK, iommu->mmio_base + MMIO_STATUS_OFFSET);
-
spin_unlock_irqrestore(&iommu->lock, flags);
}
list_add_tail(&dma_domain->list, &iommu_pd_list);
spin_unlock_irqrestore(&iommu_pd_list_lock, flags);
+ dev_data = get_dev_data(dev);
+
+ if (!dev_data->passthrough)
+ dev->archdata.dma_ops = &amd_iommu_dma_ops;
+ else
+ dev->archdata.dma_ops = &nommu_dma_ops;
+
break;
case BUS_NOTIFY_DEL_DEVICE:
to handle */
LIST_HEAD(amd_iommu_unity_map); /* a list of required unity mappings
we find in ACPI */
-bool amd_iommu_unmap_flush; /* if true, flush on every unmap */
+u32 amd_iommu_unmap_flush; /* if true, flush on every unmap */
LIST_HEAD(amd_iommu_list); /* list of all AMD IOMMUs in the
system */
if (!iommu->dev)
return 1;
+ iommu->root_pdev = pci_get_bus_and_slot(iommu->dev->bus->number,
+ PCI_DEVFN(0, 0));
+
iommu->cap_ptr = h->cap_ptr;
iommu->pci_seg = h->pci_seg;
iommu->mmio_phys = h->mmio_phys;
{
int i, j;
u32 ioc_feature_control;
- struct pci_dev *pdev = NULL;
+ struct pci_dev *pdev = iommu->root_pdev;
/* RD890 BIOSes may not have completely reconfigured the iommu */
- if (!is_rd890_iommu(iommu->dev))
+ if (!is_rd890_iommu(iommu->dev) || !pdev)
return;
/*
* First, we need to ensure that the iommu is enabled. This is
* controlled by a register in the northbridge
*/
- pdev = pci_get_bus_and_slot(iommu->dev->bus->number, PCI_DEVFN(0, 0));
-
- if (!pdev)
- return;
/* Select Northbridge indirect register 0x75 and enable writing */
pci_write_config_dword(pdev, 0x60, 0x75 | (1 << 7));
if (!(ioc_feature_control & 0x1))
pci_write_config_dword(pdev, 0x64, ioc_feature_control | 1);
- pci_dev_put(pdev);
-
/* Restore the iommu BAR */
pci_write_config_dword(iommu->dev, iommu->cap_ptr + 4,
iommu->stored_addr_lo);
amd_iommu_init_api();
+ x86_platform.iommu_shutdown = disable_iommus;
+
if (iommu_pass_through)
goto out;
else
printk(KERN_INFO "AMD-Vi: Lazy IO/TLB flushing enabled\n");
- x86_platform.iommu_shutdown = disable_iommus;
-
out:
return ret;
/* Pointer to PCI device of this IOMMU */
struct pci_dev *dev;
+ /* Cache pdev to root device for resume quirks */
+ struct pci_dev *root_pdev;
+
/* physical address of MMIO space */
u64 mmio_phys;
/* virtual address of MMIO space */
* If true, the addresses will be flushed on unmap time, not when
* they are reused
*/
-extern bool amd_iommu_unmap_flush;
+extern u32 amd_iommu_unmap_flush;
/* Smallest number of PASIDs supported by any IOMMU in the system */
extern u32 amd_iommu_max_pasids;
return 0;
as->pte_count = devm_kzalloc(smmu->dev,
- sizeof(as->pte_count[0]) * SMMU_PDIR_COUNT, GFP_KERNEL);
+ sizeof(as->pte_count[0]) * SMMU_PDIR_COUNT, GFP_ATOMIC);
if (!as->pte_count) {
dev_err(smmu->dev,
"failed to allocate smmu_device PTE cunters\n");
return -ENOMEM;
}
- as->pdir_page = alloc_page(GFP_KERNEL | __GFP_DMA);
+ as->pdir_page = alloc_page(GFP_ATOMIC | __GFP_DMA);
if (!as->pdir_page) {
dev_err(smmu->dev,
"failed to allocate smmu_device page directory\n");
skb = NULL;
else if (*debug & DEBUG_SEND_ERR)
printk(KERN_DEBUG
- "%s ch%d mgr prim(%x) addr(%x) err %d\n",
- __func__, ch->nr, hh->prim, ch->addr, ret);
+ "%s mgr prim(%x) err %d\n",
+ __func__, hh->prim, ret);
}
out:
mutex_unlock(&st->lmutex);
config LEDS_ASIC3
bool "LED support for the HTC ASIC3"
- depends on LEDS_CLASS
+ depends on LEDS_CLASS=y
depends on MFD_ASIC3
default y
help
config LEDS_RENESAS_TPU
bool "LED support for Renesas TPU"
- depends on LEDS_CLASS && HAVE_CLK && GENERIC_GPIO
+ depends on LEDS_CLASS=y && HAVE_CLK && GENERIC_GPIO
help
This option enables build of the LED TPU platform driver,
suitable to drive any TPU channel on newer Renesas SoCs.
led_cdev->brightness = led_cdev->brightness_get(led_cdev);
}
-static ssize_t led_brightness_show(struct device *dev,
+static ssize_t led_brightness_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
if (!led_cdev->blink_brightness)
led_cdev->blink_brightness = led_cdev->max_brightness;
- if (led_get_trigger_data(led_cdev) &&
- delay_on == led_cdev->blink_delay_on &&
- delay_off == led_cdev->blink_delay_off)
- return;
-
- led_stop_software_blink(led_cdev);
-
led_cdev->blink_delay_on = delay_on;
led_cdev->blink_delay_off = delay_off;
#include <linux/reboot.h>
#include "leds.h"
+static int panic_heartbeats;
+
struct heartbeat_trig_data {
unsigned int phase;
unsigned int period;
unsigned long brightness = LED_OFF;
unsigned long delay = 0;
+ if (unlikely(panic_heartbeats)) {
+ led_set_brightness(led_cdev, LED_OFF);
+ return;
+ }
+
/* acts like an actual heart beat -- ie thump-thump-pause... */
switch (heartbeat_data->phase) {
case 0:
return NOTIFY_DONE;
}
+static int heartbeat_panic_notifier(struct notifier_block *nb,
+ unsigned long code, void *unused)
+{
+ panic_heartbeats = 1;
+ return NOTIFY_DONE;
+}
+
static struct notifier_block heartbeat_reboot_nb = {
.notifier_call = heartbeat_reboot_notifier,
};
static struct notifier_block heartbeat_panic_nb = {
- .notifier_call = heartbeat_reboot_notifier,
+ .notifier_call = heartbeat_panic_notifier,
};
static int __init heartbeat_trig_init(void)
ti->split_io = dm_rh_get_region_size(ms->rh);
ti->num_flush_requests = 1;
ti->num_discard_requests = 1;
+ ti->discard_zeroes_data_unsupported = 1;
ms->kmirrord_wq = alloc_workqueue("kmirrord",
WQ_NON_REENTRANT | WQ_MEM_RECLAIM, 0);
* We need to dec pending if this was a write.
*/
if (rw == WRITE) {
- if (!(bio->bi_rw & REQ_FLUSH))
+ if (!(bio->bi_rw & (REQ_FLUSH | REQ_DISCARD)))
dm_rh_dec(ms->rh, map_context->ll);
return error;
}
return;
}
+ if (bio->bi_rw & REQ_DISCARD)
+ return;
+
/* We must inform the log that the sync count has changed. */
log->type->set_region_sync(log, region, 0);
struct bio *bio;
for (bio = bios->head; bio; bio = bio->bi_next) {
- if (bio->bi_rw & REQ_FLUSH)
+ if (bio->bi_rw & (REQ_FLUSH | REQ_DISCARD))
continue;
rh_inc(rh, dm_rh_bio_to_region(rh, bio));
}
cell_release_singleton(cell, bio);
cell_release_singleton(cell2, bio);
- remap_and_issue(tc, bio, lookup_result.block);
+ if ((!lookup_result.shared) && pool->pf.discard_passdown)
+ remap_and_issue(tc, bio, lookup_result.block);
+ else
+ bio_endio(bio, 0);
}
break;
if (r)
return r;
+ r = dm_pool_commit_metadata(pool->pmd);
+ if (r) {
+ DMERR("%s: dm_pool_commit_metadata() failed, error = %d",
+ __func__, r);
+ return r;
+ }
+
r = dm_pool_reserve_metadata_snap(pool->pmd);
if (r)
DMWARN("reserve_metadata_snap message failed.");
if (tc->pool->pf.discard_enabled) {
ti->discards_supported = 1;
ti->num_discard_requests = 1;
+ ti->discard_zeroes_data_unsupported = 1;
}
dm_put(pool_md);
* can be sane */
return -EBUSY;
rdev->data_offset = offset;
+ rdev->new_data_offset = offset;
return len;
}
return sprintf(page, "%s\n", array_states[st]);
}
-static int do_md_stop(struct mddev * mddev, int ro, int is_open);
-static int md_set_readonly(struct mddev * mddev, int is_open);
+static int do_md_stop(struct mddev * mddev, int ro, struct block_device *bdev);
+static int md_set_readonly(struct mddev * mddev, struct block_device *bdev);
static int do_md_run(struct mddev * mddev);
static int restart_array(struct mddev *mddev);
/* stopping an active array */
if (atomic_read(&mddev->openers) > 0)
return -EBUSY;
- err = do_md_stop(mddev, 0, 0);
+ err = do_md_stop(mddev, 0, NULL);
break;
case inactive:
/* stopping an active array */
if (mddev->pers) {
if (atomic_read(&mddev->openers) > 0)
return -EBUSY;
- err = do_md_stop(mddev, 2, 0);
+ err = do_md_stop(mddev, 2, NULL);
} else
err = 0; /* already inactive */
break;
break; /* not supported yet */
case readonly:
if (mddev->pers)
- err = md_set_readonly(mddev, 0);
+ err = md_set_readonly(mddev, NULL);
else {
mddev->ro = 1;
set_disk_ro(mddev->gendisk, 1);
case read_auto:
if (mddev->pers) {
if (mddev->ro == 0)
- err = md_set_readonly(mddev, 0);
+ err = md_set_readonly(mddev, NULL);
else if (mddev->ro == 1)
err = restart_array(mddev);
if (err == 0) {
}
EXPORT_SYMBOL_GPL(md_stop);
-static int md_set_readonly(struct mddev *mddev, int is_open)
+static int md_set_readonly(struct mddev *mddev, struct block_device *bdev)
{
int err = 0;
mutex_lock(&mddev->open_mutex);
- if (atomic_read(&mddev->openers) > is_open) {
+ if (atomic_read(&mddev->openers) > !!bdev) {
printk("md: %s still in use.\n",mdname(mddev));
err = -EBUSY;
goto out;
}
+ if (bdev)
+ sync_blockdev(bdev);
if (mddev->pers) {
__md_stop_writes(mddev);
* 0 - completely stop and dis-assemble array
* 2 - stop but do not disassemble array
*/
-static int do_md_stop(struct mddev * mddev, int mode, int is_open)
+static int do_md_stop(struct mddev * mddev, int mode,
+ struct block_device *bdev)
{
struct gendisk *disk = mddev->gendisk;
struct md_rdev *rdev;
mutex_lock(&mddev->open_mutex);
- if (atomic_read(&mddev->openers) > is_open ||
+ if (atomic_read(&mddev->openers) > !!bdev ||
mddev->sysfs_active) {
printk("md: %s still in use.\n",mdname(mddev));
mutex_unlock(&mddev->open_mutex);
return -EBUSY;
}
+ if (bdev)
+ /* It is possible IO was issued on some other
+ * open file which was closed before we took ->open_mutex.
+ * As that was not the last close __blkdev_put will not
+ * have called sync_blockdev, so we must.
+ */
+ sync_blockdev(bdev);
if (mddev->pers) {
if (mddev->ro)
err = do_md_run(mddev);
if (err) {
printk(KERN_WARNING "md: do_md_run() returned %d\n", err);
- do_md_stop(mddev, 0, 0);
+ do_md_stop(mddev, 0, NULL);
}
}
super_types[mddev->major_version].
validate_super(mddev, rdev);
if ((info->state & (1<<MD_DISK_SYNC)) &&
- (!test_bit(In_sync, &rdev->flags) ||
- rdev->raid_disk != info->raid_disk)) {
+ rdev->raid_disk != info->raid_disk) {
/* This was a hot-add request, but events doesn't
* match, so reject it.
*/
goto done_unlock;
case STOP_ARRAY:
- err = do_md_stop(mddev, 0, 1);
+ err = do_md_stop(mddev, 0, bdev);
goto done_unlock;
case STOP_ARRAY_RO:
- err = md_set_readonly(mddev, 1);
+ err = md_set_readonly(mddev, bdev);
goto done_unlock;
case BLKROSET:
thread->tsk = kthread_run(md_thread, thread,
"%s_%s",
mdname(thread->mddev),
- name ?: mddev->pers->name);
+ name);
if (IS_ERR(thread->tsk)) {
kfree(thread);
return NULL;
int skipped = 0;
struct md_rdev *rdev;
char *desc;
+ struct blk_plug plug;
/* just incase thread restarts... */
if (test_bit(MD_RECOVERY_DONE, &mddev->recovery))
}
mddev->curr_resync_completed = j;
+ blk_start_plug(&plug);
while (j < max_sectors) {
sector_t sectors;
* this also signals 'finished resyncing' to md_stop
*/
out:
+ blk_finish_plug(&plug);
wait_event(mddev->recovery_wait, !atomic_read(&mddev->recovery_active));
/* tell personality that we are finished */
}
{
- mddev->thread = md_register_thread(multipathd, mddev, NULL);
+ mddev->thread = md_register_thread(multipathd, mddev,
+ "multipath");
if (!mddev->thread) {
printk(KERN_ERR "multipath: couldn't allocate thread"
" for %s\n", mdname(mddev));
#include <linux/device-mapper.h>
#include <linux/export.h>
+#include <linux/vmalloc.h>
#ifdef CONFIG_DM_DEBUG_SPACE_MAPS
ca->nr = nr_blocks;
ca->nr_free = nr_blocks;
- ca->counts = kzalloc(sizeof(*ca->counts) * nr_blocks, GFP_KERNEL);
- if (!ca->counts)
- return -ENOMEM;
+
+ if (!nr_blocks)
+ ca->counts = NULL;
+ else {
+ ca->counts = vzalloc(sizeof(*ca->counts) * nr_blocks);
+ if (!ca->counts)
+ return -ENOMEM;
+ }
return 0;
}
+static void ca_destroy(struct count_array *ca)
+{
+ vfree(ca->counts);
+}
+
static int ca_load(struct count_array *ca, struct dm_space_map *sm)
{
int r;
static int ca_extend(struct count_array *ca, dm_block_t extra_blocks)
{
dm_block_t nr_blocks = ca->nr + extra_blocks;
- uint32_t *counts = kzalloc(sizeof(*counts) * nr_blocks, GFP_KERNEL);
+ uint32_t *counts = vzalloc(sizeof(*counts) * nr_blocks);
if (!counts)
return -ENOMEM;
- memcpy(counts, ca->counts, sizeof(*counts) * ca->nr);
- kfree(ca->counts);
+ if (ca->counts) {
+ memcpy(counts, ca->counts, sizeof(*counts) * ca->nr);
+ ca_destroy(ca);
+ }
ca->nr = nr_blocks;
ca->nr_free += extra_blocks;
ca->counts = counts;
return 0;
}
-static void ca_destroy(struct count_array *ca)
-{
- kfree(ca->counts);
-}
-
/*----------------------------------------------------------------*/
struct sm_checker {
int r;
struct sm_checker *smc;
- if (!sm)
- return NULL;
+ if (IS_ERR_OR_NULL(sm))
+ return ERR_PTR(-EINVAL);
smc = kmalloc(sizeof(*smc), GFP_KERNEL);
if (!smc)
- return NULL;
+ return ERR_PTR(-ENOMEM);
memcpy(&smc->sm, &ops_, sizeof(smc->sm));
r = ca_create(&smc->old_counts, sm);
if (r) {
kfree(smc);
- return NULL;
+ return ERR_PTR(r);
}
r = ca_create(&smc->counts, sm);
if (r) {
ca_destroy(&smc->old_counts);
kfree(smc);
- return NULL;
+ return ERR_PTR(r);
}
smc->real_sm = sm;
ca_destroy(&smc->counts);
ca_destroy(&smc->old_counts);
kfree(smc);
- return NULL;
+ return ERR_PTR(r);
}
r = ca_commit(&smc->old_counts, &smc->counts);
ca_destroy(&smc->counts);
ca_destroy(&smc->old_counts);
kfree(smc);
- return NULL;
+ return ERR_PTR(r);
}
return &smc->sm;
int r;
struct sm_checker *smc;
- if (!sm)
- return NULL;
+ if (IS_ERR_OR_NULL(sm))
+ return ERR_PTR(-EINVAL);
smc = kmalloc(sizeof(*smc), GFP_KERNEL);
if (!smc)
- return NULL;
+ return ERR_PTR(-ENOMEM);
memcpy(&smc->sm, &ops_, sizeof(smc->sm));
r = ca_create(&smc->old_counts, sm);
if (r) {
kfree(smc);
- return NULL;
+ return ERR_PTR(r);
}
r = ca_create(&smc->counts, sm);
if (r) {
ca_destroy(&smc->old_counts);
kfree(smc);
- return NULL;
+ return ERR_PTR(r);
}
smc->real_sm = sm;
dm_block_t nr_blocks)
{
struct dm_space_map *sm = dm_sm_disk_create_real(tm, nr_blocks);
- return dm_sm_checker_create_fresh(sm);
+ struct dm_space_map *smc;
+
+ if (IS_ERR_OR_NULL(sm))
+ return sm;
+
+ smc = dm_sm_checker_create_fresh(sm);
+ if (IS_ERR(smc))
+ dm_sm_destroy(sm);
+
+ return smc;
}
EXPORT_SYMBOL_GPL(dm_sm_disk_create);
void dm_tm_destroy(struct dm_transaction_manager *tm)
{
+ if (!tm->is_clone)
+ wipe_shadow_table(tm);
+
kfree(tm);
}
EXPORT_SYMBOL_GPL(dm_tm_destroy);
}
*sm = dm_sm_checker_create(inner);
- if (!*sm)
+ if (IS_ERR(*sm)) {
+ r = PTR_ERR(*sm);
goto bad2;
+ }
} else {
r = dm_bm_write_lock(dm_tm_get_bm(*tm), sb_location,
}
*sm = dm_sm_checker_create(inner);
- if (!*sm)
+ if (IS_ERR(*sm)) {
+ r = PTR_ERR(*sm);
goto bad2;
+ }
}
return 0;
int bad_sectors;
int disk = start_disk + i;
- if (disk >= conf->raid_disks)
- disk -= conf->raid_disks;
+ if (disk >= conf->raid_disks * 2)
+ disk -= conf->raid_disks * 2;
rdev = rcu_dereference(conf->mirrors[disk].rdev);
if (r1_bio->bios[disk] == IO_BLOCKED
const unsigned long do_sync = (bio->bi_rw & REQ_SYNC);
const unsigned long do_flush_fua = (bio->bi_rw & (REQ_FLUSH | REQ_FUA));
struct md_rdev *blocked_rdev;
- int plugged;
int first_clone;
int sectors_handled;
int max_sectors;
* the bad blocks. Each set of writes gets it's own r1bio
* with a set of bios attached.
*/
- plugged = mddev_check_plugged(mddev);
disks = conf->raid_disks * 2;
retry_write:
bio_list_add(&conf->pending_bio_list, mbio);
conf->pending_count++;
spin_unlock_irqrestore(&conf->device_lock, flags);
+ if (!mddev_check_plugged(mddev))
+ md_wakeup_thread(mddev->thread);
}
/* Mustn't call r1_bio_write_done before this next test,
* as it could result in the bio being freed.
/* In case raid1d snuck in to freeze_array */
wake_up(&conf->wait_barrier);
-
- if (do_sync || !bitmap || !plugged)
- md_wakeup_thread(mddev->thread);
}
static void status(struct seq_file *seq, struct mddev *mddev)
if (atomic_dec_and_test(&r1_bio->remaining)) {
/* if we're here, all write(s) have completed, so clean up */
- md_done_sync(mddev, r1_bio->sectors, 1);
- put_buf(r1_bio);
+ int s = r1_bio->sectors;
+ if (test_bit(R1BIO_MadeGood, &r1_bio->state) ||
+ test_bit(R1BIO_WriteError, &r1_bio->state))
+ reschedule_retry(r1_bio);
+ else {
+ put_buf(r1_bio);
+ md_done_sync(mddev, s, 1);
+ }
}
}
*/
if (test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) {
atomic_set(&r1_bio->remaining, read_targets);
- for (i = 0; i < conf->raid_disks * 2; i++) {
+ for (i = 0; i < conf->raid_disks * 2 && read_targets; i++) {
bio = r1_bio->bios[i];
if (bio->bi_end_io == end_sync_read) {
+ read_targets--;
md_sync_acct(bio->bi_bdev, nr_sectors);
generic_make_request(bio);
}
err = -EINVAL;
spin_lock_init(&conf->device_lock);
rdev_for_each(rdev, mddev) {
+ struct request_queue *q;
int disk_idx = rdev->raid_disk;
if (disk_idx >= mddev->raid_disks
|| disk_idx < 0)
if (disk->rdev)
goto abort;
disk->rdev = rdev;
+ q = bdev_get_queue(rdev->bdev);
+ if (q->merge_bvec_fn)
+ mddev->merge_check_needed = 1;
disk->head_position = 0;
}
goto abort;
}
err = -ENOMEM;
- conf->thread = md_register_thread(raid1d, mddev, NULL);
+ conf->thread = md_register_thread(raid1d, mddev, "raid1");
if (!conf->thread) {
printk(KERN_ERR
"md/raid1:%s: couldn't allocate thread\n",
const unsigned long do_fua = (bio->bi_rw & REQ_FUA);
unsigned long flags;
struct md_rdev *blocked_rdev;
- int plugged;
int sectors_handled;
int max_sectors;
int sectors;
* of r10_bios is recored in bio->bi_phys_segments just as with
* the read case.
*/
- plugged = mddev_check_plugged(mddev);
r10_bio->read_slot = -1; /* make sure repl_bio gets freed */
raid10_find_phys(conf, r10_bio);
bio_list_add(&conf->pending_bio_list, mbio);
conf->pending_count++;
spin_unlock_irqrestore(&conf->device_lock, flags);
+ if (!mddev_check_plugged(mddev))
+ md_wakeup_thread(mddev->thread);
if (!r10_bio->devs[i].repl_bio)
continue;
bio_list_add(&conf->pending_bio_list, mbio);
conf->pending_count++;
spin_unlock_irqrestore(&conf->device_lock, flags);
+ if (!mddev_check_plugged(mddev))
+ md_wakeup_thread(mddev->thread);
}
/* Don't remove the bias on 'remaining' (one_write_done) until
/* In case raid10d snuck in to freeze_array */
wake_up(&conf->wait_barrier);
-
- if (do_sync || !mddev->bitmap || !plugged)
- md_wakeup_thread(mddev->thread);
}
static void status(struct seq_file *seq, struct mddev *mddev)
if (r10_sync_page_io(rdev,
r10_bio->devs[sl].addr +
sect,
- s<<9, conf->tmppage, WRITE)
+ s, conf->tmppage, WRITE)
== 0) {
/* Well, this device is dead */
printk(KERN_NOTICE
switch (r10_sync_page_io(rdev,
r10_bio->devs[sl].addr +
sect,
- s<<9, conf->tmppage,
+ s, conf->tmppage,
READ)) {
case 0:
/* Well, this device is dead */
slot = r10_bio->read_slot;
printk_ratelimited(
KERN_ERR
- "md/raid10:%s: %s: redirecting"
+ "md/raid10:%s: %s: redirecting "
"sector %llu to another mirror\n",
mdname(mddev),
bdevname(rdev->bdev, b),
blk_start_plug(&plug);
for (;;) {
- flush_pending_writes(conf);
+ if (atomic_read(&mddev->plug_cnt) == 0)
+ flush_pending_writes(conf);
spin_lock_irqsave(&conf->device_lock, flags);
if (list_empty(head)) {
/* want to reconstruct this device */
rb2 = r10_bio;
sect = raid10_find_virt(conf, sector_nr, i);
+ if (sect >= mddev->resync_max_sectors) {
+ /* last stripe is not complete - don't
+ * try to recover this sector.
+ */
+ continue;
+ }
/* Unless we are doing a full sync, or a replacement
* we only need to recover the block if it is set in
* the bitmap
spin_lock_init(&conf->resync_lock);
init_waitqueue_head(&conf->wait_barrier);
- conf->thread = md_register_thread(raid10d, mddev, NULL);
+ conf->thread = md_register_thread(raid10d, mddev, "raid10");
if (!conf->thread)
goto out;
rdev_for_each(rdev, mddev) {
long long diff;
+ struct request_queue *q;
disk_idx = rdev->raid_disk;
if (disk_idx < 0)
goto out_free_conf;
disk->rdev = rdev;
}
+ q = bdev_get_queue(rdev->bdev);
+ if (q->merge_bvec_fn)
+ mddev->merge_check_needed = 1;
diff = (rdev->new_data_offset - rdev->data_offset);
if (!mddev->reshape_backwards)
diff = -diff;
BUG_ON(!list_empty(&sh->lru));
BUG_ON(atomic_read(&conf->active_stripes)==0);
if (test_bit(STRIPE_HANDLE, &sh->state)) {
- if (test_bit(STRIPE_DELAYED, &sh->state))
+ if (test_bit(STRIPE_DELAYED, &sh->state) &&
+ !test_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
list_add_tail(&sh->lru, &conf->delayed_list);
else if (test_bit(STRIPE_BIT_DELAY, &sh->state) &&
sh->bm_seq - conf->seq_write > 0)
list_add_tail(&sh->lru, &conf->bitmap_list);
else {
+ clear_bit(STRIPE_DELAYED, &sh->state);
clear_bit(STRIPE_BIT_DELAY, &sh->state);
list_add_tail(&sh->lru, &conf->handle_list);
}
* a chance*/
md_check_recovery(conf->mddev);
}
+ /*
+ * Because md_wait_for_blocked_rdev
+ * will dec nr_pending, we must
+ * increment it first.
+ */
+ atomic_inc(&rdev->nr_pending);
md_wait_for_blocked_rdev(rdev, conf->mddev);
} else {
/* Acknowledged bad block - skip the write */
} else {
const char *bdn = bdevname(rdev->bdev, b);
int retry = 0;
+ int set_bad = 0;
clear_bit(R5_UPTODATE, &sh->dev[i].flags);
atomic_inc(&rdev->read_errors);
mdname(conf->mddev),
(unsigned long long)s,
bdn);
- else if (conf->mddev->degraded >= conf->max_degraded)
+ else if (conf->mddev->degraded >= conf->max_degraded) {
+ set_bad = 1;
printk_ratelimited(
KERN_WARNING
"md/raid:%s: read error not correctable "
mdname(conf->mddev),
(unsigned long long)s,
bdn);
- else if (test_bit(R5_ReWrite, &sh->dev[i].flags))
+ } else if (test_bit(R5_ReWrite, &sh->dev[i].flags)) {
/* Oh, no!!! */
+ set_bad = 1;
printk_ratelimited(
KERN_WARNING
"md/raid:%s: read error NOT corrected!! "
mdname(conf->mddev),
(unsigned long long)s,
bdn);
- else if (atomic_read(&rdev->read_errors)
+ } else if (atomic_read(&rdev->read_errors)
> conf->max_nr_stripes)
printk(KERN_WARNING
"md/raid:%s: Too many read errors, failing device %s.\n",
else {
clear_bit(R5_ReadError, &sh->dev[i].flags);
clear_bit(R5_ReWrite, &sh->dev[i].flags);
- md_error(conf->mddev, rdev);
+ if (!(set_bad
+ && test_bit(In_sync, &rdev->flags)
+ && rdev_set_badblocks(
+ rdev, sh->sector, STRIPE_SECTORS, 0)))
+ md_error(conf->mddev, rdev);
}
}
rdev_dec_pending(rdev, conf->mddev);
finish:
/* wait for this device to become unblocked */
- if (conf->mddev->external && unlikely(s.blocked_rdev))
- md_wait_for_blocked_rdev(s.blocked_rdev, conf->mddev);
+ if (unlikely(s.blocked_rdev)) {
+ if (conf->mddev->external)
+ md_wait_for_blocked_rdev(s.blocked_rdev,
+ conf->mddev);
+ else
+ /* Internal metadata will immediately
+ * be written by raid5d, so we don't
+ * need to wait here.
+ */
+ rdev_dec_pending(s.blocked_rdev,
+ conf->mddev);
+ }
if (s.handle_bad_blocks)
for (i = disks; i--; ) {
raid_bio->bi_next = (void*)rdev;
align_bi->bi_bdev = rdev->bdev;
align_bi->bi_flags &= ~(1 << BIO_SEG_VALID);
- /* No reshape active, so we can trust rdev->data_offset */
- align_bi->bi_sector += rdev->data_offset;
if (!bio_fits_rdev(align_bi) ||
is_badblock(rdev, align_bi->bi_sector, align_bi->bi_size>>9,
return 0;
}
+ /* No reshape active, so we can trust rdev->data_offset */
+ align_bi->bi_sector += rdev->data_offset;
+
spin_lock_irq(&conf->device_lock);
wait_event_lock_irq(conf->wait_for_stripe,
conf->quiesce == 0,
struct stripe_head *sh;
const int rw = bio_data_dir(bi);
int remaining;
- int plugged;
if (unlikely(bi->bi_rw & REQ_FLUSH)) {
md_flush_request(mddev, bi);
bi->bi_next = NULL;
bi->bi_phys_segments = 1; /* over-loaded to count active stripes */
- plugged = mddev_check_plugged(mddev);
for (;logical_sector < last_sector; logical_sector += STRIPE_SECTORS) {
DEFINE_WAIT(w);
int previous;
if ((bi->bi_rw & REQ_SYNC) &&
!test_and_set_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
atomic_inc(&conf->preread_active_stripes);
+ mddev_check_plugged(mddev);
release_stripe(sh);
} else {
/* cannot get stripe for read-ahead, just give-up */
finish_wait(&conf->wait_for_overlap, &w);
break;
}
-
}
- if (!plugged)
- md_wakeup_thread(mddev->thread);
spin_lock_irq(&conf->device_lock);
remaining = raid5_dec_bi_phys_segments(bi);
int raid_disk, memory, max_disks;
struct md_rdev *rdev;
struct disk_info *disk;
+ char pers_name[6];
if (mddev->new_level != 5
&& mddev->new_level != 4
printk(KERN_INFO "md/raid:%s: allocated %dkB\n",
mdname(mddev), memory);
- conf->thread = md_register_thread(raid5d, mddev, NULL);
+ sprintf(pers_name, "raid%d", mddev->new_level);
+ conf->thread = md_register_thread(raid5d, mddev, pers_name);
if (!conf->thread) {
printk(KERN_ERR
"md/raid:%s: couldn't allocate thread.\n",
if (rdev->saved_raid_disk >= 0 &&
rdev->saved_raid_disk >= first &&
conf->disks[rdev->saved_raid_disk].rdev == NULL)
- disk = rdev->saved_raid_disk;
- else
- disk = first;
- for ( ; disk <= last ; disk++) {
+ first = rdev->saved_raid_disk;
+
+ for (disk = first; disk <= last; disk++) {
p = conf->disks + disk;
if (p->rdev == NULL) {
clear_bit(In_sync, &rdev->flags);
if (rdev->saved_raid_disk != disk)
conf->fullsync = 1;
rcu_assign_pointer(p->rdev, rdev);
- break;
+ goto out;
}
+ }
+ for (disk = first; disk <= last; disk++) {
+ p = conf->disks + disk;
if (test_bit(WantReplacement, &p->rdev->flags) &&
p->replacement == NULL) {
clear_bit(In_sync, &rdev->flags);
break;
}
}
+out:
print_raid5_conf(conf);
return err;
}
struct saa7146_dev *dev = video_drvdata(file);
struct saa7146_fh *fh = NULL;
int result = 0;
- enum v4l2_buf_type type;
DEB_EE("file:%p, dev:%s\n", file, video_device_node_name(vdev));
DEB_D("using: %p\n", dev);
- type = vdev->vfl_type == VFL_TYPE_GRABBER
- ? V4L2_BUF_TYPE_VIDEO_CAPTURE
- : V4L2_BUF_TYPE_VBI_CAPTURE;
-
/* check if an extension is registered */
if( NULL == dev->ext ) {
DEB_S("no extension registered for this device\n");
if (minor == MAX_DVB_MINORS) {
kfree(dvbdevfops);
kfree(dvbdev);
+ up_write(&minor_rwsem);
mutex_unlock(&dvbdev_register_lock);
return -EINVAL;
}
if(cx24110_readreg(state,0x10)&0x40) {
/* the RS error counter has finished one counting window */
cx24110_writereg(state,0x10,0x60); /* select the byer reg */
- cx24110_readreg(state, 0x12) |
+ (void)(cx24110_readreg(state, 0x12) |
(cx24110_readreg(state, 0x13) << 8) |
- (cx24110_readreg(state, 0x14) << 16);
+ (cx24110_readreg(state, 0x14) << 16));
cx24110_writereg(state,0x10,0x70); /* select the bler reg */
state->lastbler=cx24110_readreg(state,0x12)|
(cx24110_readreg(state,0x13)<<8)|
if (ret)
goto error;
- switch ((buf[0] >> 0) & 0x03) {
+ switch ((buf[0] >> 0) & 0x07) {
case 0:
c->modulation = QAM_16;
break;
lg_reg("writing %d registers...\n", len);
- for (i = 0; i < len - 1; i++) {
+ for (i = 0; i < len; i++) {
ret = lg216x_write_reg(state, regs[i].reg, regs[i].val);
if (lg_fail(ret))
return ret;
.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
{ USB_DEVICE(0x2040, 0xc0a0),
.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
+ { USB_DEVICE(0x2040, 0xf5a0),
+ .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
{ } /* Terminating entry */
};
goto err_out_free_region;
dev->io = pci_resource_start(pdev, 0);
- if (snd_tea575x_init(&dev->tea)) {
+ if (snd_tea575x_init(&dev->tea, THIS_MODULE)) {
printk(KERN_ERR "radio-maxiradio: Unable to detect TEA575x tuner\n");
goto err_out_free_region;
}
snprintf(fmr2->tea.bus_info, sizeof(fmr2->tea.bus_info), "%s:%s",
fmr2->is_fmd2 ? "PnP" : "ISA", dev_name(pdev));
- if (snd_tea575x_init(&fmr2->tea)) {
+ if (snd_tea575x_init(&fmr2->tea, THIS_MODULE)) {
printk(KERN_ERR "radio-sf16fmr2: Unable to detect TEA575x tuner\n");
release_region(fmr2->io, 2);
return -ENODEV;
{ USB_DEVICE_AND_INTERFACE_INFO(0x1b80, 0xd700, USB_CLASS_HID, 0, 0) },
/* Sanei Electric, Inc. FM USB Radio (sold as DealExtreme.com PCear) */
{ USB_DEVICE_AND_INTERFACE_INFO(0x10c5, 0x819a, USB_CLASS_HID, 0, 0) },
+ /* Axentia ALERT FM USB Receiver */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x12cf, 0x7111, USB_CLASS_HID, 0, 0) },
/* Terminating entry */
{ }
};
static bool txandrx; /* default = 0 */
module_param(txandrx, bool, 0444);
-MODULE_PARM_DESC(invert, "Allow simultaneous TX and RX");
+MODULE_PARM_DESC(txandrx, "Allow simultaneous TX and RX");
static unsigned int wake_sc = 0x800F040C;
module_param(wake_sc, uint, 0644);
data->dev->tx_ir = wbcir_tx;
data->dev->priv = data;
data->dev->dev.parent = &device->dev;
+ data->dev->timeout = MS_TO_NS(100);
+ data->dev->allowed_protos = RC_TYPE_ALL;
if (!request_region(data->wbase, WAKEUP_IOMEM_LEN, DRVNAME)) {
dev_err(dev, "Region 0x%lx-0x%lx already in use!\n",
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 2, 0, 0, 0 },
.gpiomute = 10,
- .needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 2, 3 },
.gpiomute = 4,
- .needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
.gpiomux = { 4, 0, 2, 3 },
.gpiomute = 1,
.no_msp34xx = 1,
- .needs_tvaudio = 1,
.tuner_type = TUNER_PHILIPS_NTSC,
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0 },
- .needs_tvaudio = 0,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
.muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 0, 1, 0, 1 },
.gpiomute = 3,
- .needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
.gpiomask = 0x0f,
.gpiomux = { 0x0c, 0x04, 0x08, 0x04 },
/* 0x04 for some cards ?? */
- .needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.audio_mode_gpio= avermedia_tvphone_audio,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 0, 0),
.gpiomux = { 0 },
- .needs_tvaudio = 1,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0xc00, 0x800, 0x400 },
.gpiomute = 0xc00,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.gpiomask = 3,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 1, 1, 2, 3 },
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_TEMIC_PAL,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 0, 1, 1),
.gpiomux = { 0, 1, 2, 3 },
.gpiomute = 4,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x20001,0x10001, 0, 0 },
.gpiomute = 10,
- .needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
.gpiomask = 15,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 13, 14, 11, 7 },
- .needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
.gpiomask = 15,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 13, 14, 11, 7 },
- .needs_tvaudio = 1,
.msp34xx_alt = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
.gpiomute = 4,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0, 1, 0 },
.gpiomute = 10,
- .needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
/* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
.gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
.gpiomute = 0x002000,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1, 0),
.gpiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
.gpiomute = 0xcfa007,
- .needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.volume_gpio = winview_volume,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 1, 0, 0, 0 },
- .needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 0x800, 0x400 },
.gpiomute = 0xc00,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = {0x400, 0x400, 0x400, 0x400 },
.gpiomute = 0xc00,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
.gpiomute = 0x40000,
- .needs_tvaudio = 0,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.audio_mode_gpio= terratv_audio,
.muxsel = MUXSEL(2, 0, 1, 1),
.gpiomux = { 0, 1, 2, 3 },
.gpiomute = 4,
- .needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x20000, 0x30000, 0x10000, 0x00000 },
.gpiomute = 0x40000,
- .needs_tvaudio = 0,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.audio_mode_gpio= terratv_audio,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 0, 0),
.gpiomux = { 0 },
- .needs_tvaudio = 1,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.muxsel_hook = PXC200_muxsel,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0 },
- .needs_tvaudio = 0,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x500, 0, 0x300, 0x900 },
.gpiomute = 0x900,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
Note: There exists another variant "Winfast 2000" with tv stereo !?
Note: eeprom only contains FF and pci subsystem id 107d:6606
*/
- .needs_tvaudio = 0,
.pll = PLL_28,
.has_radio = 1,
.tuner_type = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */
.muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 0x551400, 0x551200, 0, 0 },
.gpiomute = 0x551c00,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL_I,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 2, 0xd0001, 0, 0 },
.gpiomute = 1,
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.gpiomux = { 4, 0, 2, 3 },
.gpiomute = 1,
.no_msp34xx = 1,
- .needs_tvaudio = 1,
.tuner_type = TUNER_PHILIPS_NTSC,
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
.gpiomask = 15,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 13, 4, 11, 7 },
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0, 0, 0},
- .needs_tvaudio = 1,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL_I,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
.gpiomute = 0x40000,
- .needs_tvaudio = 1,
.no_msp34xx = 1,
.pll = PLL_35,
.tuner_type = TUNER_PHILIPS_PAL_I,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = {2,0,0,0 },
.gpiomute = 1,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
MUX2 (mask 0x30000):
0,2,3= from MSP34xx
1= FM stereo Radio from Tuner */
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0, 0x10, 8 },
.gpiomute = 4,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 2, 0, 0, 0 },
.gpiomute = 10,
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_TEMIC_PAL,
.tuner_addr = ADDR_UNSET,
.gpiomask = 0,
.muxsel = MUXSEL(3, 1),
.gpiomux = { 0 },
- .needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_35,
.tuner_type = TUNER_ABSENT,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x400, 0x400, 0x400, 0x400 },
.gpiomute = 0x800,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_TEMIC_4036FY5_NTSC,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 2),
.gpiomux = { },
.no_msp34xx = 1,
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 1, 0, 4, 4 },
.gpiomute = 9,
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.gpiomute = 0x1800,
.audio_mode_gpio= fv2000s_audio,
.no_msp34xx = 1,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x500, 0x500, 0x300, 0x900 },
.gpiomute = 0x900,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
.gpiomute = 13,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_LG_PAL_I_FM,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x01, 0x00, 0x03, 0x03 },
.gpiomute = 0x09,
- .needs_tvaudio = 1,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 0, 0),
.gpiomux = { 0 },
- .needs_tvaudio = 0,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
.muxsel = MUXSEL(2, 1, 1),
.gpiomux = { 0, 1, 2, 2 },
.gpiomute = 4,
- .needs_tvaudio = 0,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 0 },
- .needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
* btwincap uses 0x80000/0x80003
*/
.gpiomute = 4,
- .needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
/* .audio_inputs= 1, */
.svhs = 2,
.muxsel = MUXSEL(2, 0, 1, 1),
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 2, 3},
.gpiomute = 4,
- .needs_tvaudio = 1,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3),
.gpiomux = { 0 },
- .needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
/* Tuner, Radio, external, internal, off, on */
.gpiomux = { 0x08, 0x0f, 0x0a, 0x08 },
.gpiomute = 0x0f,
- .needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_NTSC,
.svhs = 2,
.gpiomask = 0x00,
.muxsel = MUXSEL(2, 3, 1, 1),
- .needs_tvaudio = 1,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 0 },
- .needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.gpiomask = 0x00,
.muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.gpiomask = 0x00,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0),
.muxsel_hook = phytec_muxsel,
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1),
.muxsel_hook = phytec_muxsel,
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.svhs = NO_SVHS, /* card has no svhs */
- .needs_tvaudio = 0,
.no_msp34xx = 1,
.no_tda7432 = 1,
.gpiomask = 0x00,
.gpiomask = 3,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 1, 1, 1, 1 },
- .needs_tvaudio = 1,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.pll = PLL_35,
.muxsel = MUXSEL(2, 3, 1, 0),
.no_msp34xx = 1,
.no_tda7432 = 1,
- .needs_tvaudio = 0,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.svhs = 2,
- .needs_tvaudio = 0,
.gpiomask = 0x68,
.muxsel = MUXSEL(2, 3, 1),
.gpiomux = { 0x68, 0x68, 0x61, 0x61 },
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 2, 2 },
.gpiomute = 3,
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 2, 2, 2),
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
.pll = PLL_28,
- .needs_tvaudio = 0,
.muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 2, 0, 0, 0 },
.gpiomute = 10,
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.tuner_addr = ADDR_UNSET,
.gpiomask = 0x008007,
.gpiomux = { 0, 0x000001,0,0 },
- .needs_tvaudio = 1,
.has_radio = 1,
},
[BTTV_BOARD_TIBET_CS16] = {
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
.gpiomute = 0x002000,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_YMEC_TVF66T5_B_DFF,
.tuner_addr = 0xc1 >>1,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 2, 2 },
.gpiomute = 3,
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_TENA_9533_DI,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 2, 0, 0, 0 },
.gpiomute = 1,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_NTSC,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x20001,0x10001, 0, 0 },
.gpiomute = 10,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL_I,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 2, 2 }, /* CONTVFMi */
.gpiomute = 3, /* CONTVFMi */
- .needs_tvaudio = 0,
.tuner_type = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
.gpiomask = 0x00,
.muxsel = MUXSEL(0, 2, 3, 1),
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.gpiomask = 0x00,
.muxsel = MUXSEL(2, 3, 1),
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.gpiomask = 0x00,
.muxsel = MUXSEL(3, 2, 1),
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3),
.gpiomux = { 0 },
- .needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
struct tuner_setup tun_setup;
/* Load tuner module before issuing tuner config call! */
- if (bttv_tvcards[btv->c.type].has_radio)
+ if (btv->has_radio)
v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
&btv->c.i2c_adap, "tuner",
0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
tun_setup.type = btv->tuner_type;
tun_setup.addr = addr;
- if (bttv_tvcards[btv->c.type].has_radio)
+ if (btv->has_radio)
tun_setup.mode_mask |= T_RADIO;
bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
}
+
+ /* The 61334 needs the msp3410 to do the radio demod to get sound */
+ if (tv.model == 61334)
+ btv->radio_uses_msp_demodulator = 1;
}
static int terratec_active_radio_upgrade(struct bttv *btv)
For now this is sufficient. */
switch (input) {
case TVAUDIO_INPUT_RADIO:
+ /* Some boards need the msp do to the radio demod */
+ if (btv->radio_uses_msp_demodulator) {
+ in = MSP_INPUT_DEFAULT;
+ break;
+ }
in = MSP_INPUT(MSP_IN_SCART2, MSP_IN_TUNER1,
MSP_DSP_IN_SCART, MSP_DSP_IN_SCART);
break;
/* i2c audio flags */
unsigned int no_msp34xx:1;
unsigned int no_tda7432:1;
- unsigned int needs_tvaudio:1;
unsigned int msp34xx_alt:1;
/* Note: currently no card definition needs to mark the presence
of a RDS saa6588 chip. If this is ever needed, then add a new
/* radio data/state */
int has_radio;
int radio_user;
+ int radio_uses_msp_demodulator;
/* miro/pinnacle + Aimslab VHX
philips matchbox (tea5757 radio tuner) support */
}
o = i * pixels_per_line + pixels_read + k;
if (o < len) {
+ u8 ch = invert - buffer[k];
got++;
- put_user((invert - buffer[k]) << shift, buf + o);
+ put_user(ch << shift, buf + o);
}
}
pixels_read += bytes;
struct qcam *qcam = video_drvdata(file);
strlcpy(vcap->driver, qcam->v4l2_dev.name, sizeof(vcap->driver));
- strlcpy(vcap->card, "B&W Quickcam", sizeof(vcap->card));
- strlcpy(vcap->bus_info, "parport", sizeof(vcap->bus_info));
+ strlcpy(vcap->card, "Connectix B&W Quickcam", sizeof(vcap->card));
+ strlcpy(vcap->bus_info, qcam->pport->name, sizeof(vcap->bus_info));
vcap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE;
vcap->capabilities = vcap->device_caps | V4L2_CAP_DEVICE_CAPS;
return 0;
pix->height = qcam->height / qcam->transfer_scale;
pix->pixelformat = (qcam->bpp == 4) ? V4L2_PIX_FMT_Y4 : V4L2_PIX_FMT_Y6;
pix->field = V4L2_FIELD_NONE;
- pix->bytesperline = qcam->width;
- pix->sizeimage = qcam->width * qcam->height;
+ pix->bytesperline = pix->width;
+ pix->sizeimage = pix->width * pix->height;
/* Just a guess */
pix->colorspace = V4L2_COLORSPACE_SRGB;
return 0;
"4-Bit Monochrome", V4L2_PIX_FMT_Y4,
{ 0, 0, 0, 0 }
},
- { 0, 0, 0,
+ { 1, 0, 0,
"6-Bit Monochrome", V4L2_PIX_FMT_Y6,
{ 0, 0, 0, 0 }
},
return 0;
}
+static int qcam_enum_framesizes(struct file *file, void *fh,
+ struct v4l2_frmsizeenum *fsize)
+{
+ static const struct v4l2_frmsize_discrete sizes[] = {
+ { 80, 60 },
+ { 160, 120 },
+ { 320, 240 },
+ };
+
+ if (fsize->index > 2)
+ return -EINVAL;
+ if (fsize->pixel_format != V4L2_PIX_FMT_Y4 &&
+ fsize->pixel_format != V4L2_PIX_FMT_Y6)
+ return -EINVAL;
+ fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
+ fsize->discrete = sizes[fsize->index];
+ return 0;
+}
+
static ssize_t qcam_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
return len;
}
+static unsigned int qcam_poll(struct file *filp, poll_table *wait)
+{
+ return v4l2_ctrl_poll(filp, wait) | POLLIN | POLLRDNORM;
+}
+
static int qcam_s_ctrl(struct v4l2_ctrl *ctrl)
{
struct qcam *qcam =
.owner = THIS_MODULE,
.open = v4l2_fh_open,
.release = v4l2_fh_release,
- .poll = v4l2_ctrl_poll,
+ .poll = qcam_poll,
.unlocked_ioctl = video_ioctl2,
.read = qcam_read,
};
.vidioc_s_input = qcam_s_input,
.vidioc_enum_input = qcam_enum_input,
.vidioc_enum_fmt_vid_cap = qcam_enum_fmt_vid_cap,
+ .vidioc_enum_framesizes = qcam_enum_framesizes,
.vidioc_g_fmt_vid_cap = qcam_g_fmt_vid_cap,
.vidioc_s_fmt_vid_cap = qcam_s_fmt_vid_cap,
.vidioc_try_fmt_vid_cap = qcam_try_fmt_vid_cap,
return NULL;
v4l2_dev = &qcam->v4l2_dev;
- strlcpy(v4l2_dev->name, "bw-qcam", sizeof(v4l2_dev->name));
+ snprintf(v4l2_dev->name, sizeof(v4l2_dev->name), "bw-qcam%d", num_cams);
- if (v4l2_device_register(NULL, v4l2_dev) < 0) {
+ if (v4l2_device_register(port->dev, v4l2_dev) < 0) {
v4l2_err(v4l2_dev, "Could not register v4l2_device\n");
kfree(qcam);
return NULL;
return NULL;
}
qcam->pport = port;
- qcam->pdev = parport_register_device(port, "bw-qcam", NULL, NULL,
+ qcam->pdev = parport_register_device(port, v4l2_dev->name, NULL, NULL,
NULL, 0, NULL);
if (qcam->pdev == NULL) {
v4l2_err(v4l2_dev, "couldn't register for %s.\n", port->name);
return -ENODEV;
}
qc_calibrate(qcam);
+ v4l2_ctrl_handler_setup(&qcam->hdl);
parport_release(qcam->pdev);
}
CX18_DEBUG_INFO("cx%d (rev %d) at %02x:%02x.%x, "
- "irq: %d, latency: %d, memory: 0x%lx\n",
+ "irq: %d, latency: %d, memory: 0x%llx\n",
cx->pci_dev->device, cx->card_rev, pci_dev->bus->number,
PCI_SLOT(pci_dev->devfn), PCI_FUNC(pci_dev->devfn),
- cx->pci_dev->irq, pci_latency, (unsigned long)cx->base_addr);
+ cx->pci_dev->irq, pci_latency, (u64)cx->base_addr);
return 0;
}
if (retval)
goto err;
- CX18_DEBUG_INFO("base addr: 0x%08x\n", cx->base_addr);
+ CX18_DEBUG_INFO("base addr: 0x%llx\n", (u64)cx->base_addr);
/* PCI Device Setup */
retval = cx18_setup_pci(cx, pci_dev, pci_id);
goto free_workqueues;
/* map io memory */
- CX18_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
- cx->base_addr + CX18_MEM_OFFSET, CX18_MEM_SIZE);
+ CX18_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n",
+ (u64)cx->base_addr + CX18_MEM_OFFSET, CX18_MEM_SIZE);
cx->enc_mem = ioremap_nocache(cx->base_addr + CX18_MEM_OFFSET,
CX18_MEM_SIZE);
if (!cx->enc_mem) {
unique ID. Starts at 1, so 0 can be used as
uninitialized value in the stream->id. */
- u32 base_addr;
+ resource_size_t base_addr;
u8 card_rev;
void __iomem *enc_mem, *reg_mem;
apu_version = (vers[0] << 24) | (vers[4] << 16) | vers[32];
while (offset + sizeof(seghdr) < fw->size) {
- /* TODO: byteswapping */
- memcpy(&seghdr, src + offset / 4, sizeof(seghdr));
+ const u32 *shptr = src + offset / 4;
+
+ seghdr.sync1 = le32_to_cpu(shptr[0]);
+ seghdr.sync2 = le32_to_cpu(shptr[1]);
+ seghdr.addr = le32_to_cpu(shptr[2]);
+ seghdr.size = le32_to_cpu(shptr[3]);
+
offset += sizeof(seghdr);
if (seghdr.sync1 != APU_ROM_SYNC1 ||
seghdr.sync2 != APU_ROM_SYNC2) {
{
u32 handle, mdl_ack_offset, mdl_ack_count;
struct cx18_mailbox *mb;
+ int i;
mb = &order->mb;
handle = mb->args[0];
return -1;
}
- cx18_memcpy_fromio(cx, order->mdl_ack, cx->enc_mem + mdl_ack_offset,
- sizeof(struct cx18_mdl_ack) * mdl_ack_count);
+ for (i = 0; i < sizeof(struct cx18_mdl_ack) * mdl_ack_count; i += sizeof(u32))
+ ((u32 *)order->mdl_ack)[i / sizeof(u32)] =
+ cx18_readl(cx, cx->enc_mem + mdl_ack_offset + i);
if ((order->flags & CX18_F_EWO_MB_STALE) == 0)
mb_ack_irq(cx, order);
struct cx18_mailbox *order_mb;
struct cx18_in_work_order *order;
int submit;
+ int i;
switch (rpu) {
case CPU:
order_mb = &order->mb;
/* mb->cmd and mb->args[0] through mb->args[2] */
- cx18_memcpy_fromio(cx, &order_mb->cmd, &mb->cmd, 4 * sizeof(u32));
+ for (i = 0; i < 4; i++)
+ (&order_mb->cmd)[i] = cx18_readl(cx, &mb->cmd + i);
+
/* mb->request and mb->ack. N.B. we want to read mb->ack last */
- cx18_memcpy_fromio(cx, &order_mb->request, &mb->request,
- 2 * sizeof(u32));
+ for (i = 0; i < 2; i++)
+ (&order_mb->request)[i] = cx18_readl(cx, &mb->request + i);
if (order_mb->request == order_mb->ack) {
CX18_DEBUG_WARN("Possibly falling behind: %s self-ack'ed our "
urb->context = dev;
urb->pipe = usb_rcvisocpipe(dev->udev,
dev->adev.end_point_addr);
- urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
+ urb->transfer_flags = URB_ISO_ASAP;
urb->transfer_buffer = dev->adev.transfer_buffer[i];
urb->interval = 1;
urb->complete = cx231xx_audio_isocirq;
urb->context = dev;
urb->pipe = usb_rcvbulkpipe(dev->udev,
dev->adev.end_point_addr);
- urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
+ urb->transfer_flags = 0;
urb->transfer_buffer = dev->adev.transfer_buffer[i];
urb->complete = cx231xx_audio_bulkirq;
urb->transfer_buffer_length = sb_size;
return -ENOMEM;
}
dev->vbi_mode.bulk_ctl.urb[i] = urb;
- urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
+ urb->transfer_flags = 0;
dev->vbi_mode.bulk_ctl.transfer_buffer[i] =
kzalloc(sb_size, GFP_KERNEL);
},
[CX23885_BOARD_HAUPPAUGE_HVR1250] = {
.name = "Hauppauge WinTV-HVR1250",
+ .porta = CX23885_ANALOG_VIDEO,
.portc = CX23885_MPEG_DVB,
+#ifdef MT2131_NO_ANALOG_SUPPORT_YET
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .tuner_addr = 0x42, /* 0x84 >> 1 */
+ .tuner_bus = 1,
+#endif
+ .force_bff = 1,
.input = {{
+#ifdef MT2131_NO_ANALOG_SUPPORT_YET
.type = CX23885_VMUX_TELEVISION,
- .vmux = 0,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN5_CH2 |
+ CX25840_VIN2_CH1,
+ .amux = CX25840_AUDIO8,
.gpio0 = 0xff00,
}, {
- .type = CX23885_VMUX_DEBUG,
- .vmux = 0,
- .gpio0 = 0xff01,
- }, {
+#endif
.type = CX23885_VMUX_COMPOSITE1,
- .vmux = 1,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN4_CH2 |
+ CX25840_VIN6_CH1,
+ .amux = CX25840_AUDIO7,
.gpio0 = 0xff02,
}, {
.type = CX23885_VMUX_SVIDEO,
- .vmux = 2,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN4_CH2 |
+ CX25840_VIN8_CH1 |
+ CX25840_SVIDEO_ON,
+ .amux = CX25840_AUDIO7,
.gpio0 = 0xff02,
} },
},
},
[CX23885_BOARD_HAUPPAUGE_HVR1255] = {
.name = "Hauppauge WinTV-HVR1255",
+ .porta = CX23885_ANALOG_VIDEO,
+ .portc = CX23885_MPEG_DVB,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = 0x42, /* 0x84 >> 1 */
+ .force_bff = 1,
+ .input = {{
+ .type = CX23885_VMUX_TELEVISION,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN5_CH2 |
+ CX25840_VIN2_CH1 |
+ CX25840_DIF_ON,
+ .amux = CX25840_AUDIO8,
+ }, {
+ .type = CX23885_VMUX_COMPOSITE1,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN4_CH2 |
+ CX25840_VIN6_CH1,
+ .amux = CX25840_AUDIO7,
+ }, {
+ .type = CX23885_VMUX_SVIDEO,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN4_CH2 |
+ CX25840_VIN8_CH1 |
+ CX25840_SVIDEO_ON,
+ .amux = CX25840_AUDIO7,
+ } },
+ },
+ [CX23885_BOARD_HAUPPAUGE_HVR1255_22111] = {
+ .name = "Hauppauge WinTV-HVR1255",
+ .porta = CX23885_ANALOG_VIDEO,
.portc = CX23885_MPEG_DVB,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = 0x42, /* 0x84 >> 1 */
+ .force_bff = 1,
+ .input = {{
+ .type = CX23885_VMUX_TELEVISION,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN5_CH2 |
+ CX25840_VIN2_CH1 |
+ CX25840_DIF_ON,
+ .amux = CX25840_AUDIO8,
+ }, {
+ .type = CX23885_VMUX_SVIDEO,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN4_CH2 |
+ CX25840_VIN8_CH1 |
+ CX25840_SVIDEO_ON,
+ .amux = CX25840_AUDIO7,
+ } },
},
[CX23885_BOARD_HAUPPAUGE_HVR1210] = {
.name = "Hauppauge WinTV-HVR1210",
}, {
.subvendor = 0x0070,
.subdevice = 0x2259,
- .card = CX23885_BOARD_HAUPPAUGE_HVR1255,
+ .card = CX23885_BOARD_HAUPPAUGE_HVR1255_22111,
}, {
.subvendor = 0x0070,
.subdevice = 0x2291,
struct cx23885_dev *dev = port->dev;
u32 bitmask = 0;
- if (command == XC2028_RESET_CLK)
+ if ((command == XC2028_RESET_CLK) || (command == XC2028_I2C_FLUSH))
return 0;
if (command != 0) {
case CX23885_BOARD_HAUPPAUGE_HVR1270:
case CX23885_BOARD_HAUPPAUGE_HVR1275:
case CX23885_BOARD_HAUPPAUGE_HVR1255:
+ case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
case CX23885_BOARD_HAUPPAUGE_HVR1210:
/* GPIO-5 RF Control: 0 = RF1 Terrestrial, 1 = RF2 Cable */
/* GPIO-6 I2C Gate which can isolate the demod from the bus */
case CX23885_BOARD_HAUPPAUGE_HVR1400:
case CX23885_BOARD_HAUPPAUGE_HVR1275:
case CX23885_BOARD_HAUPPAUGE_HVR1255:
+ case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
case CX23885_BOARD_HAUPPAUGE_HVR1210:
/* FIXME: Implement me */
break;
case CX23885_BOARD_HAUPPAUGE_HVR1270:
case CX23885_BOARD_HAUPPAUGE_HVR1275:
case CX23885_BOARD_HAUPPAUGE_HVR1255:
+ case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
case CX23885_BOARD_HAUPPAUGE_HVR1210:
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
case CX23885_BOARD_HAUPPAUGE_HVR1270:
case CX23885_BOARD_HAUPPAUGE_HVR1275:
case CX23885_BOARD_HAUPPAUGE_HVR1255:
+ case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
case CX23885_BOARD_HAUPPAUGE_HVR1210:
case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
*/
switch (dev->board) {
case CX23885_BOARD_TEVII_S470:
- case CX23885_BOARD_HAUPPAUGE_HVR1250:
/* Currently only enabled for the integrated IR controller */
if (!enable_885_ir)
break;
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
case CX23885_BOARD_HAUPPAUGE_HVR1800:
case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
case CX23885_BOARD_HAUPPAUGE_HVR1700:
case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
+ case CX23885_BOARD_HAUPPAUGE_HVR1255:
+ case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
case CX23885_BOARD_HAUPPAUGE_HVR1270:
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_MYGICA_X8506:
}
break;
case CX23885_BOARD_HAUPPAUGE_HVR1255:
+ case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
i2c_bus = &dev->i2c_bus[0];
fe0->dvb.frontend = dvb_attach(s5h1411_attach,
&hcw_s5h1411_config,
0x60, &dev->i2c_bus[1].i2c_adap,
&hauppauge_tda18271_config);
}
+
+ tda18271_attach(&dev->ts1.analog_fe,
+ 0x60, &dev->i2c_bus[1].i2c_adap,
+ &hauppauge_tda18271_config);
+
break;
case CX23885_BOARD_HAUPPAUGE_HVR1800:
i2c_bus = &dev->i2c_bus[0];
if ((dev->board == CX23885_BOARD_HAUPPAUGE_HVR1800) ||
(dev->board == CX23885_BOARD_MPX885) ||
+ (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1250) ||
+ (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255) ||
+ (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255_22111) ||
(dev->board == CX23885_BOARD_HAUPPAUGE_HVR1850)) {
/* Configure audio routing */
v4l2_subdev_call(dev->sd_cx25840, audio, s_routing,
fe = vfe->dvb.frontend;
- if (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1850)
+ if ((dev->board == CX23885_BOARD_HAUPPAUGE_HVR1850) ||
+ (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255) ||
+ (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255_22111))
fe = &dev->ts1.analog_fe;
if (fe && fe->ops.tuner_ops.set_analog_params) {
int ret;
switch (dev->board) {
+ case CX23885_BOARD_HAUPPAUGE_HVR1255:
+ case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
case CX23885_BOARD_HAUPPAUGE_HVR1850:
ret = cx23885_set_freq_via_ops(dev, f);
break;
#define CX23885_BOARD_MYGICA_X8507 33
#define CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL 34
#define CX23885_BOARD_TEVII_S471 35
+#define CX23885_BOARD_HAUPPAUGE_HVR1255_22111 36
#define GPIO_0 0x00000001
#define GPIO_1 0x00000002
list_add_tail(&dev->devlist, &cx25821_devlist);
mutex_unlock(&cx25821_devlist_mutex);
- strcpy(cx25821_boards[UNKNOWN_BOARD].name, "unknown");
- strcpy(cx25821_boards[CX25821_BOARD].name, "cx25821");
-
if (dev->pci->device != 0x8210) {
pr_info("%s(): Exiting. Incorrect Hardware device = 0x%02x\n",
__func__, dev->pci->device);
};
struct cx25821_board {
- char *name;
+ const char *name;
enum port porta;
enum port portb;
enum port portc;
/* ----------------------------------------------------------------------- */
-static void cx23885_std_setup(struct i2c_client *client);
+static void cx23888_std_setup(struct i2c_client *client);
int cx25840_write(struct i2c_client *client, u16 addr, u8 value)
{
finish_wait(&state->fw_wait, &wait);
destroy_workqueue(q);
- /* Call the cx23885 specific std setup func, we no longer rely on
+ /* Call the cx23888 specific std setup func, we no longer rely on
* the generic cx24840 func.
*/
- cx23885_std_setup(client);
+ if (is_cx23888(state))
+ cx23888_std_setup(client);
+ else
+ cx25840_std_setup(client);
/* (re)set input */
set_input(client, state->vid_input, state->aud_input);
cx25840_write4(client, 0x410, 0xffff0dbf);
cx25840_write4(client, 0x414, 0x00137d03);
- cx25840_write4(client, 0x418, 0x01008080);
+
+ /* on the 887, 0x418 is HSCALE_CTRL, on the 888 it is
+ CHROMA_CTRL */
+ if (is_cx23888(state))
+ cx25840_write4(client, 0x418, 0x01008080);
+ else
+ cx25840_write4(client, 0x418, 0x01000000);
+
cx25840_write4(client, 0x41c, 0x00000000);
- cx25840_write4(client, 0x420, 0x001c3e0f);
+
+ /* on the 887, 0x420 is CHROMA_CTRL, on the 888 it is
+ CRUSH_CTRL */
+ if (is_cx23888(state))
+ cx25840_write4(client, 0x420, 0x001c3e0f);
+ else
+ cx25840_write4(client, 0x420, 0x001c8282);
+
cx25840_write4(client, 0x42c, 0x42600000);
cx25840_write4(client, 0x430, 0x0000039b);
cx25840_write4(client, 0x438, 0x00000000);
cx25840_write4(client, 0x8d0, 0x1f063870);
}
- if (is_cx2388x(state)) {
+ if (is_cx23888(state)) {
/* HVR1850 */
/* AUD_IO_CTRL - I2S Input, Parallel1*/
/* - Channel 1 src - Parallel1 (Merlin out) */
}
cx25840_and_or(client, 0x400, ~0xf, fmt);
cx25840_and_or(client, 0x403, ~0x3, pal_m);
- if (is_cx2388x(state))
- cx23885_std_setup(client);
+ if (is_cx23888(state))
+ cx23888_std_setup(client);
else
cx25840_std_setup(client);
if (!is_cx2583x(state))
static int cx25840_s_ctrl(struct v4l2_ctrl *ctrl)
{
struct v4l2_subdev *sd = to_sd(ctrl);
+ struct cx25840_state *state = to_state(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
switch (ctrl->id) {
break;
case V4L2_CID_SATURATION:
- cx25840_write(client, 0x420, ctrl->val << 1);
- cx25840_write(client, 0x421, ctrl->val << 1);
+ if (is_cx23888(state)) {
+ cx25840_write(client, 0x418, ctrl->val << 1);
+ cx25840_write(client, 0x419, ctrl->val << 1);
+ } else {
+ cx25840_write(client, 0x420, ctrl->val << 1);
+ cx25840_write(client, 0x421, ctrl->val << 1);
+ }
break;
case V4L2_CID_HUE:
- cx25840_write(client, 0x422, ctrl->val);
+ if (is_cx23888(state))
+ cx25840_write(client, 0x41a, ctrl->val);
+ else
+ cx25840_write(client, 0x422, ctrl->val);
break;
default:
fmt->field = V4L2_FIELD_INTERLACED;
fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
- Vsrc = (cx25840_read(client, 0x476) & 0x3f) << 4;
- Vsrc |= (cx25840_read(client, 0x475) & 0xf0) >> 4;
+ if (is_cx23888(state)) {
+ Vsrc = (cx25840_read(client, 0x42a) & 0x3f) << 4;
+ Vsrc |= (cx25840_read(client, 0x429) & 0xf0) >> 4;
+ } else {
+ Vsrc = (cx25840_read(client, 0x476) & 0x3f) << 4;
+ Vsrc |= (cx25840_read(client, 0x475) & 0xf0) >> 4;
+ }
- Hsrc = (cx25840_read(client, 0x472) & 0x3f) << 4;
- Hsrc |= (cx25840_read(client, 0x471) & 0xf0) >> 4;
+ if (is_cx23888(state)) {
+ Hsrc = (cx25840_read(client, 0x426) & 0x3f) << 4;
+ Hsrc |= (cx25840_read(client, 0x425) & 0xf0) >> 4;
+ } else {
+ Hsrc = (cx25840_read(client, 0x472) & 0x3f) << 4;
+ Hsrc |= (cx25840_read(client, 0x471) & 0xf0) >> 4;
+ }
Vlines = fmt->height + (is_50Hz ? 4 : 7);
struct cx25840_state *state = to_state(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
- if (is_cx2388x(state))
- cx23885_std_setup(client);
+ if (is_cx23888(state))
+ cx23888_std_setup(client);
return set_input(client, input, state->aud_input);
}
struct cx25840_state *state = to_state(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
- if (is_cx2388x(state))
- cx23885_std_setup(client);
+ if (is_cx23888(state))
+ cx23888_std_setup(client);
return set_input(client, state->vid_input, input);
}
}
}
-static void cx23885_std_setup(struct i2c_client *client)
+static void cx23888_std_setup(struct i2c_client *client)
{
struct cx25840_state *state = to_state(i2c_get_clientdata(client));
v4l2_std_id std = state->std;
dprintk(1,"Loading firmware ...\n");
dataptr = (u32*)firmware->data;
for (i = 0; i < (firmware->size >> 2); i++) {
- value = *dataptr;
+ value = le32_to_cpu(*dataptr);
checksum += ~value;
memory_write(dev->core, i, value);
dataptr++;
[EM2884_BOARD_CINERGY_HTC_STICK] = {
.name = "Terratec Cinergy HTC Stick",
.has_dvb = 1,
+ .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
#if 0
.tuner_type = TUNER_PHILIPS_TDA8290,
.tuner_addr = 0x41,
if (dev->board.has_dvb)
request_module("em28xx-dvb");
- if (dev->board.has_ir_i2c && !disable_ir)
+ if (dev->board.ir_codes && !disable_ir)
request_module("em28xx-rc");
}
if (dev->board.ir_codes == NULL) {
/* No remote control support */
+ em28xx_warn("Remote control support is not available for "
+ "this card.\n");
return 0;
}
enum v4l2_buf_type buf_type)
{
struct gspca_dev *gspca_dev = video_drvdata(file);
- int ret;
+ int i, ret;
if (buf_type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
return -EINVAL;
wake_up_interruptible(&gspca_dev->wq);
/* empty the transfer queues */
+ for (i = 0; i < gspca_dev->nframes; i++)
+ gspca_dev->frame[i].v4l2_buf.flags &= ~BUF_ALL_FLAGS;
atomic_set(&gspca_dev->fr_q, 0);
atomic_set(&gspca_dev->fr_i, 0);
gspca_dev->fr_o = 0;
static void setcontrast(struct gspca_dev *gspca_dev);
static void setgain(struct gspca_dev *gspca_dev);
static void setexposure(struct gspca_dev *gspca_dev);
-static int sd_setagc(struct gspca_dev *gspca_dev, __s32 val);
+static void setagc(struct gspca_dev *gspca_dev);
static void setawb(struct gspca_dev *gspca_dev);
static void setaec(struct gspca_dev *gspca_dev);
static void setsharpness(struct gspca_dev *gspca_dev);
.step = 1,
.default_value = 1,
},
- .set = sd_setagc
+ .set_control = setagc
},
[AWB] = {
{
int i;
for (i = 0; i < 5; i++) {
+ msleep(10);
data = ov534_reg_read(gspca_dev, OV534_REG_STATUS);
switch (data) {
cam->ctrls = sd->ctrls;
- /* the auto white balance control works only when auto gain is set */
- if (sd_ctrls[AGC].qctrl.default_value == 0)
- gspca_dev->ctrl_inac |= (1 << AWB);
-
cam->cam_mode = ov772x_mode;
cam->nmodes = ARRAY_SIZE(ov772x_mode);
} while (remaining_len > 0);
}
-static int sd_setagc(struct gspca_dev *gspca_dev, __s32 val)
-{
- struct sd *sd = (struct sd *) gspca_dev;
-
- sd->ctrls[AGC].val = val;
-
- /* the auto white balance control works only
- * when auto gain is set */
- if (val) {
- gspca_dev->ctrl_inac &= ~(1 << AWB);
- } else {
- gspca_dev->ctrl_inac |= (1 << AWB);
- if (sd->ctrls[AWB].val) {
- sd->ctrls[AWB].val = 0;
- if (gspca_dev->streaming)
- setawb(gspca_dev);
- }
- }
- if (gspca_dev->streaming)
- setagc(gspca_dev);
- return gspca_dev->usb_err;
-}
-
static int sd_querymenu(struct gspca_dev *gspca_dev,
struct v4l2_querymenu *menu)
{
int i;
for (i = 0; i < 5; i++) {
+ msleep(10);
data = reg_r(gspca_dev, OV534_REG_STATUS);
switch (data) {
struct v4l2_ctrl_handler *hdl = &gspca_dev->ctrl_handler;
gspca_dev->vdev.ctrl_handler = hdl;
- v4l2_ctrl_handler_init(hdl, 4);
+ v4l2_ctrl_handler_init(hdl, 5);
sd->contrast = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
V4L2_CID_CONTRAST, 0, 15, 1, 7);
V4L2_CID_SATURATION, 0, 255, 1, 127);
sd->hue = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
V4L2_CID_HUE, -180, 180, 1, 0);
- v4l2_ctrl_cluster(4, &sd->brightness);
sd->gamma = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
V4L2_CID_GAMMA, 0, 255, 1, 0x10);
V4L2_CID_BLUE_BALANCE, 0, 127, 1, 0x28);
sd->red = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
V4L2_CID_RED_BALANCE, 0, 127, 1, 0x28);
- v4l2_ctrl_cluster(2, &sd->blue);
if (sd->sensor != SENSOR_OV9655 && sd->sensor != SENSOR_SOI968 &&
sd->sensor != SENSOR_OV7670 && sd->sensor != SENSOR_MT9M001 &&
V4L2_CID_HFLIP, 0, 1, 1, 0);
sd->vflip = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
V4L2_CID_VFLIP, 0, 1, 1, 0);
- v4l2_ctrl_cluster(2, &sd->hflip);
}
if (sd->sensor != SENSOR_SOI968 && sd->sensor != SENSOR_MT9VPRB &&
V4L2_CID_GAIN, 0, 28, 1, 0);
sd->autogain = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
V4L2_CID_AUTOGAIN, 0, 1, 1, 1);
+ }
+
+ sd->jpegqual = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
+ V4L2_CID_JPEG_COMPRESSION_QUALITY, 50, 90, 1, 80);
+ if (hdl->error) {
+ pr_err("Could not initialize controls\n");
+ return hdl->error;
+ }
+
+ v4l2_ctrl_cluster(4, &sd->brightness);
+ v4l2_ctrl_cluster(2, &sd->blue);
+ if (sd->hflip)
+ v4l2_ctrl_cluster(2, &sd->hflip);
+ if (sd->autogain) {
if (sd->sensor == SENSOR_SOI968)
/* this sensor doesn't have the exposure control and
autogain is clustered with gain instead. This works
/* Otherwise autogain is clustered with exposure. */
v4l2_ctrl_auto_cluster(2, &sd->autogain, 0, false);
}
-
- sd->jpegqual = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
- V4L2_CID_JPEG_COMPRESSION_QUALITY, 50, 90, 1, 80);
- if (hdl->error) {
- pr_err("Could not initialize controls\n");
- return hdl->error;
- }
return 0;
}
set_gamma(gspca_dev, v4l2_ctrl_g_ctrl(sd->gamma));
set_redblue(gspca_dev, v4l2_ctrl_g_ctrl(sd->blue),
v4l2_ctrl_g_ctrl(sd->red));
- set_gain(gspca_dev, v4l2_ctrl_g_ctrl(sd->gain));
- set_exposure(gspca_dev, v4l2_ctrl_g_ctrl(sd->exposure));
- set_hvflip(gspca_dev, v4l2_ctrl_g_ctrl(sd->hflip),
- v4l2_ctrl_g_ctrl(sd->vflip));
+ if (sd->gain)
+ set_gain(gspca_dev, v4l2_ctrl_g_ctrl(sd->gain));
+ if (sd->exposure)
+ set_exposure(gspca_dev, v4l2_ctrl_g_ctrl(sd->exposure));
+ if (sd->hflip)
+ set_hvflip(gspca_dev, v4l2_ctrl_g_ctrl(sd->hflip),
+ v4l2_ctrl_g_ctrl(sd->vflip));
reg_w1(gspca_dev, 0x1007, 0x20);
reg_w1(gspca_dev, 0x1061, 0x03);
struct sd *sd = (struct sd *) gspca_dev;
int avg_lum;
- if (!v4l2_ctrl_g_ctrl(sd->autogain))
+ if (sd->autogain == NULL || !v4l2_ctrl_g_ctrl(sd->autogain))
return;
avg_lum = atomic_read(&sd->avg_lum);
| (SENSOR_ ## sensor << 8) \
| (flags)
static const struct usb_device_id device_table[] = {
- {USB_DEVICE(0x0458, 0x7025), BS(SN9C120, MI0360)},
+ {USB_DEVICE(0x0458, 0x7025), BSF(SN9C120, MI0360B, F_PDN_INV)},
{USB_DEVICE(0x0458, 0x702e), BS(SN9C120, OV7660)},
{USB_DEVICE(0x045e, 0x00f5), BSF(SN9C105, OV7660, F_PDN_INV)},
{USB_DEVICE(0x045e, 0x00f7), BSF(SN9C105, OV7660, F_PDN_INV)},
pci_write_config_dword(pdev, 0x40, 0xffff);
IVTV_DEBUG_INFO("%d (rev %d) at %02x:%02x.%x, "
- "irq: %d, latency: %d, memory: 0x%lx\n",
+ "irq: %d, latency: %d, memory: 0x%llx\n",
pdev->device, pdev->revision, pdev->bus->number,
PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
- pdev->irq, pci_latency, (unsigned long)itv->base_addr);
+ pdev->irq, pci_latency, (u64)itv->base_addr);
return 0;
}
itv->cxhdl.priv = itv;
itv->cxhdl.func = ivtv_api_func;
- IVTV_DEBUG_INFO("base addr: 0x%08x\n", itv->base_addr);
+ IVTV_DEBUG_INFO("base addr: 0x%llx\n", (u64)itv->base_addr);
/* PCI Device Setup */
retval = ivtv_setup_pci(itv, pdev, pci_id);
goto free_mem;
/* map io memory */
- IVTV_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
- itv->base_addr + IVTV_ENCODER_OFFSET, IVTV_ENCODER_SIZE);
+ IVTV_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n",
+ (u64)itv->base_addr + IVTV_ENCODER_OFFSET, IVTV_ENCODER_SIZE);
itv->enc_mem = ioremap_nocache(itv->base_addr + IVTV_ENCODER_OFFSET,
IVTV_ENCODER_SIZE);
if (!itv->enc_mem) {
}
if (itv->has_cx23415) {
- IVTV_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
- itv->base_addr + IVTV_DECODER_OFFSET, IVTV_DECODER_SIZE);
+ IVTV_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n",
+ (u64)itv->base_addr + IVTV_DECODER_OFFSET, IVTV_DECODER_SIZE);
itv->dec_mem = ioremap_nocache(itv->base_addr + IVTV_DECODER_OFFSET,
IVTV_DECODER_SIZE);
if (!itv->dec_mem) {
}
/* map registers memory */
- IVTV_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
- itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE);
+ IVTV_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n",
+ (u64)itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE);
itv->reg_mem =
ioremap_nocache(itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE);
if (!itv->reg_mem) {
struct v4l2_subdev *sd_video; /* controlling video decoder subdev */
struct v4l2_subdev *sd_audio; /* controlling audio subdev */
struct v4l2_subdev *sd_muxer; /* controlling audio muxer subdev */
- u32 base_addr; /* PCI resource base address */
+ resource_size_t base_addr; /* PCI resource base address */
volatile void __iomem *enc_mem; /* pointer to mapped encoder memory */
volatile void __iomem *dec_mem; /* pointer to mapped decoder memory */
volatile void __iomem *reg_mem; /* pointer to mapped registers */
V4L2_M2M_DST = 1,
};
-/* Source and destination queue data */
-static struct m2mtest_q_data q_data[2];
-
-static struct m2mtest_q_data *get_q_data(enum v4l2_buf_type type)
-{
- switch (type) {
- case V4L2_BUF_TYPE_VIDEO_OUTPUT:
- return &q_data[V4L2_M2M_SRC];
- case V4L2_BUF_TYPE_VIDEO_CAPTURE:
- return &q_data[V4L2_M2M_DST];
- default:
- BUG();
- }
- return NULL;
-}
-
#define V4L2_CID_TRANS_TIME_MSEC V4L2_CID_PRIVATE_BASE
#define V4L2_CID_TRANS_NUM_BUFS (V4L2_CID_PRIVATE_BASE + 1)
int aborting;
struct v4l2_m2m_ctx *m2m_ctx;
+
+ /* Source and destination queue data */
+ struct m2mtest_q_data q_data[2];
};
+static struct m2mtest_q_data *get_q_data(struct m2mtest_ctx *ctx,
+ enum v4l2_buf_type type)
+{
+ switch (type) {
+ case V4L2_BUF_TYPE_VIDEO_OUTPUT:
+ return &ctx->q_data[V4L2_M2M_SRC];
+ case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+ return &ctx->q_data[V4L2_M2M_DST];
+ default:
+ BUG();
+ }
+ return NULL;
+}
+
+
static struct v4l2_queryctrl *get_ctrl(int id)
{
int i;
int tile_w, bytes_left;
int width, height, bytesperline;
- q_data = get_q_data(V4L2_BUF_TYPE_VIDEO_OUTPUT);
+ q_data = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT);
width = q_data->width;
height = q_data->height;
if (!vq)
return -EINVAL;
- q_data = get_q_data(f->type);
+ q_data = get_q_data(ctx, f->type);
f->fmt.pix.width = q_data->width;
f->fmt.pix.height = q_data->height;
if (!vq)
return -EINVAL;
- q_data = get_q_data(f->type);
+ q_data = get_q_data(ctx, f->type);
if (!q_data)
return -EINVAL;
struct m2mtest_q_data *q_data;
unsigned int size, count = *nbuffers;
- q_data = get_q_data(vq->type);
+ q_data = get_q_data(ctx, vq->type);
size = q_data->width * q_data->height * q_data->fmt->depth >> 3;
dprintk(ctx->dev, "type: %d\n", vb->vb2_queue->type);
- q_data = get_q_data(vb->vb2_queue->type);
+ q_data = get_q_data(ctx, vb->vb2_queue->type);
if (vb2_plane_size(vb, 0) < q_data->sizeimage) {
dprintk(ctx->dev, "%s data will not fit into plane (%lu < %lu)\n",
ctx->transtime = MEM2MEM_DEF_TRANSTIME;
ctx->num_processed = 0;
+ ctx->q_data[V4L2_M2M_SRC].fmt = &formats[0];
+ ctx->q_data[V4L2_M2M_DST].fmt = &formats[0];
+
ctx->m2m_ctx = v4l2_m2m_ctx_init(dev->m2m_dev, ctx, &queue_init);
if (IS_ERR(ctx->m2m_ctx)) {
goto err_m2m;
}
- q_data[V4L2_M2M_SRC].fmt = &formats[0];
- q_data[V4L2_M2M_DST].fmt = &formats[0];
-
return 0;
v4l2_m2m_release(dev->m2m_dev);
#define CSICR1_INV_DATA (1 << 3)
#define CSICR1_INV_PCLK (1 << 2)
#define CSICR1_REDGE (1 << 1)
+#define CSICR1_FMT_MASK (CSICR1_PACK_DIR | CSICR1_SWAP16_EN)
#define SHIFT_STATFF_LEVEL 22
#define SHIFT_RXFF_LEVEL 19
u32 src_pixel;
u32 ch1_pixel;
u32 irq_flags;
+ u32 csicr1;
};
/* prp resizing parameters */
.ch1_pixel = 0x2ca00565, /* RGB565 */
.irq_flags = PRP_INTR_RDERR | PRP_INTR_CH1WERR |
PRP_INTR_CH1FC | PRP_INTR_LBOVF,
+ .csicr1 = 0,
}
},
{
.irq_flags = PRP_INTR_RDERR | PRP_INTR_CH2WERR |
PRP_INTR_CH2FC | PRP_INTR_LBOVF |
PRP_INTR_CH2OVF,
+ .csicr1 = CSICR1_PACK_DIR,
}
},
{
.irq_flags = PRP_INTR_RDERR | PRP_INTR_CH2WERR |
PRP_INTR_CH2FC | PRP_INTR_LBOVF |
PRP_INTR_CH2OVF,
+ .csicr1 = CSICR1_SWAP16_EN,
}
},
};
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct mx2_camera_dev *pcdev = ici->priv;
struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
- const struct soc_camera_format_xlate *xlate;
unsigned long common_flags;
int ret;
int bytesperline;
return ret;
}
- xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
- if (!xlate) {
- dev_warn(icd->parent, "Format %x not found\n", pixfmt);
- return -EINVAL;
- }
-
- if (xlate->code == V4L2_MBUS_FMT_YUYV8_2X8) {
- csicr1 |= CSICR1_PACK_DIR;
- csicr1 &= ~CSICR1_SWAP16_EN;
- dev_dbg(icd->parent, "already yuyv format, don't convert\n");
- } else if (xlate->code == V4L2_MBUS_FMT_UYVY8_2X8) {
- csicr1 &= ~CSICR1_PACK_DIR;
- csicr1 |= CSICR1_SWAP16_EN;
- dev_dbg(icd->parent, "convert uyvy mbus format into yuyv\n");
- } else {
- dev_warn(icd->parent, "mbus format not supported\n");
- return -EINVAL;
- }
+ csicr1 = (csicr1 & ~CSICR1_FMT_MASK) | pcdev->emma_prp->cfg.csicr1;
if (common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
csicr1 |= CSICR1_REDGE;
}
}
- if (code == V4L2_MBUS_FMT_UYVY8_2X8) {
- formats++;
- if (xlate) {
- xlate->host_fmt =
- soc_mbus_get_fmtdesc(V4L2_MBUS_FMT_YUYV8_2X8);
- xlate->code = code;
- dev_dbg(dev, "Providing host format %s for sensor code %d\n",
- xlate->host_fmt->name, code);
- xlate++;
- }
- }
-
/* Generic pass-trough */
formats++;
if (xlate) {
preview_config_contrast,
NULL,
offsetof(struct prev_params, contrast),
- 0, true,
+ 0, 0, true,
}, /* OMAP3ISP_PREV_BRIGHTNESS */ {
preview_config_brightness,
NULL,
offsetof(struct prev_params, brightness),
- 0, true,
+ 0, 0, true,
},
};
unsigned int elv = prev->crop.top + prev->crop.height - 1;
u32 features;
- if (format->code == V4L2_MBUS_FMT_Y10_1X10) {
+ if (format->code != V4L2_MBUS_FMT_Y10_1X10) {
sph -= 2;
eph += 2;
slv -= 2;
#include <linux/fs.h>
#include <linux/kernel.h>
#include <linux/mm.h>
+#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/isa.h>
#include <asm/io.h>
if (pixm)
sizes[i] = max(size, pixm->plane_fmt[i].sizeimage);
else
- sizes[i] = size;
+ sizes[i] = max_t(u32, size, frame->payload[i]);
+
allocators[i] = ctx->fimc_dev->alloc_ctx;
}
static int fimc_capture_open(struct file *file)
{
struct fimc_dev *fimc = video_drvdata(file);
- int ret = v4l2_fh_open(file);
-
- if (ret)
- return ret;
+ int ret;
dbg("pid: %d, state: 0x%lx", task_pid_nr(current), fimc->state);
- /* Return if the corresponding video mem2mem node is already opened. */
if (fimc_m2m_active(fimc))
return -EBUSY;
set_bit(ST_CAPT_BUSY, &fimc->state);
- pm_runtime_get_sync(&fimc->pdev->dev);
+ ret = pm_runtime_get_sync(&fimc->pdev->dev);
+ if (ret < 0)
+ return ret;
- if (++fimc->vid_cap.refcnt == 1) {
- ret = fimc_pipeline_initialize(&fimc->pipeline,
- &fimc->vid_cap.vfd->entity, true);
- if (ret < 0) {
- dev_err(&fimc->pdev->dev,
- "Video pipeline initialization failed\n");
- pm_runtime_put_sync(&fimc->pdev->dev);
- fimc->vid_cap.refcnt--;
- v4l2_fh_release(file);
- clear_bit(ST_CAPT_BUSY, &fimc->state);
- return ret;
- }
- ret = fimc_capture_ctrls_create(fimc);
+ ret = v4l2_fh_open(file);
+ if (ret)
+ return ret;
- if (!ret && !fimc->vid_cap.user_subdev_api)
- ret = fimc_capture_set_default_format(fimc);
+ if (++fimc->vid_cap.refcnt != 1)
+ return 0;
+
+ ret = fimc_pipeline_initialize(&fimc->pipeline,
+ &fimc->vid_cap.vfd->entity, true);
+ if (ret < 0) {
+ clear_bit(ST_CAPT_BUSY, &fimc->state);
+ pm_runtime_put_sync(&fimc->pdev->dev);
+ fimc->vid_cap.refcnt--;
+ v4l2_fh_release(file);
+ return ret;
}
+ ret = fimc_capture_ctrls_create(fimc);
+
+ if (!ret && !fimc->vid_cap.user_subdev_api)
+ ret = fimc_capture_set_default_format(fimc);
+
return ret;
}
struct fimc_dev *fimc = video_drvdata(file);
struct fimc_ctx *ctx = fimc->vid_cap.ctx;
- if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
- return -EINVAL;
-
return fimc_fill_format(&ctx->d_frame, f);
}
struct v4l2_mbus_framefmt mf;
struct fimc_fmt *ffmt = NULL;
- if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
- return -EINVAL;
-
if (pix->pixelformat == V4L2_PIX_FMT_JPEG) {
fimc_capture_try_format(ctx, &pix->width, &pix->height,
NULL, &pix->pixelformat,
struct fimc_fmt *s_fmt = NULL;
int ret, i;
- if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
- return -EINVAL;
if (vb2_is_busy(&fimc->vid_cap.vbq))
return -EBUSY;
pix->width = mf->width;
pix->height = mf->height;
}
+
fimc_adjust_mplane_format(ff->fmt, pix->width, pix->height, pix);
for (i = 0; i < ff->fmt->colplanes; i++)
- ff->payload[i] =
- (pix->width * pix->height * ff->fmt->depth[i]) / 8;
+ ff->payload[i] = pix->plane_fmt[i].sizeimage;
set_frame_bounds(ff, pix->width, pix->height);
/* Reset the composition rectangle if not yet configured */
{
struct fimc_dev *fimc = video_drvdata(file);
struct fimc_pipeline *p = &fimc->pipeline;
+ struct v4l2_subdev *sd = p->subdevs[IDX_SENSOR];
int ret;
if (fimc_capture_active(fimc))
return -EBUSY;
- media_entity_pipeline_start(&p->subdevs[IDX_SENSOR]->entity,
- p->m_pipeline);
+ ret = media_entity_pipeline_start(&sd->entity, p->m_pipeline);
+ if (ret < 0)
+ return ret;
if (fimc->vid_cap.user_subdev_api) {
ret = fimc_pipeline_validate(fimc);
- if (ret)
+ if (ret < 0) {
+ media_entity_pipeline_stop(&sd->entity);
return ret;
+ }
}
return vb2_streamon(&fimc->vid_cap.vbq, type);
}
.colplanes = 2,
.flags = FMT_FLAGS_M2M,
}, {
- .name = "YUV 4:2:0 non-contiguous 2-planar, Y/CbCr",
+ .name = "YUV 4:2:0 non-contig. 2p, Y/CbCr",
.fourcc = V4L2_PIX_FMT_NV12M,
.color = FIMC_FMT_YCBCR420,
.depth = { 8, 4 },
.colplanes = 2,
.flags = FMT_FLAGS_M2M,
}, {
- .name = "YUV 4:2:0 non-contiguous 3-planar, Y/Cb/Cr",
+ .name = "YUV 4:2:0 non-contig. 3p, Y/Cb/Cr",
.fourcc = V4L2_PIX_FMT_YUV420M,
.color = FIMC_FMT_YCBCR420,
.depth = { 8, 2, 2 },
.colplanes = 3,
.flags = FMT_FLAGS_M2M,
}, {
- .name = "YUV 4:2:0 non-contiguous 2-planar, Y/CbCr, tiled",
+ .name = "YUV 4:2:0 non-contig. 2p, tiled",
.fourcc = V4L2_PIX_FMT_NV12MT,
.color = FIMC_FMT_YCBCR420,
.depth = { 8, 4 },
ctx->effect.type = FIMC_REG_CIIMGEFF_FIN_BYPASS;
if (!handler->error) {
- v4l2_ctrl_cluster(3, &ctrls->colorfx);
+ v4l2_ctrl_cluster(2, &ctrls->colorfx);
ctrls->ready = true;
}
if (!ctrls->ready)
return;
- mutex_lock(&ctrls->handler.lock);
+ mutex_lock(ctrls->handler.lock);
v4l2_ctrl_activate(ctrls->rotate, active);
v4l2_ctrl_activate(ctrls->hflip, active);
v4l2_ctrl_activate(ctrls->vflip, active);
ctx->hflip = 0;
ctx->vflip = 0;
}
- mutex_unlock(&ctrls->handler.lock);
+ mutex_unlock(ctrls->handler.lock);
}
/* Update maximum value of the alpha color control */
pix->width = width;
for (i = 0; i < pix->num_planes; ++i) {
- u32 bpl = pix->plane_fmt[i].bytesperline;
- u32 *sizeimage = &pix->plane_fmt[i].sizeimage;
+ struct v4l2_plane_pix_format *plane_fmt = &pix->plane_fmt[i];
+ u32 bpl = plane_fmt->bytesperline;
if (fmt->colplanes > 1 && (bpl == 0 || bpl < pix->width))
bpl = pix->width; /* Planar */
if (i == 0) /* Same bytesperline for each plane. */
bytesperline = bpl;
- pix->plane_fmt[i].bytesperline = bytesperline;
- *sizeimage = (pix->width * pix->height * fmt->depth[i]) / 8;
+ plane_fmt->bytesperline = bytesperline;
+ plane_fmt->sizeimage = max((pix->width * pix->height *
+ fmt->depth[i]) / 8, plane_fmt->sizeimage);
}
}
static int fimc_lite_open(struct file *file)
{
struct fimc_lite *fimc = video_drvdata(file);
- int ret = v4l2_fh_open(file);
+ int ret;
- if (ret)
- return ret;
+ if (mutex_lock_interruptible(&fimc->lock))
+ return -ERESTARTSYS;
set_bit(ST_FLITE_IN_USE, &fimc->state);
- pm_runtime_get_sync(&fimc->pdev->dev);
+ ret = pm_runtime_get_sync(&fimc->pdev->dev);
+ if (ret < 0)
+ goto done;
- if (++fimc->ref_count != 1 || fimc->out_path != FIMC_IO_DMA)
- return ret;
+ ret = v4l2_fh_open(file);
+ if (ret < 0)
+ goto done;
- ret = fimc_pipeline_initialize(&fimc->pipeline, &fimc->vfd->entity,
- true);
- if (ret < 0) {
- v4l2_err(fimc->vfd, "Video pipeline initialization failed\n");
- pm_runtime_put_sync(&fimc->pdev->dev);
- fimc->ref_count--;
- v4l2_fh_release(file);
- clear_bit(ST_FLITE_IN_USE, &fimc->state);
- }
+ if (++fimc->ref_count == 1 && fimc->out_path == FIMC_IO_DMA) {
+ ret = fimc_pipeline_initialize(&fimc->pipeline,
+ &fimc->vfd->entity, true);
+ if (ret < 0) {
+ pm_runtime_put_sync(&fimc->pdev->dev);
+ fimc->ref_count--;
+ v4l2_fh_release(file);
+ clear_bit(ST_FLITE_IN_USE, &fimc->state);
+ }
- fimc_lite_clear_event_counters(fimc);
+ fimc_lite_clear_event_counters(fimc);
+ }
+done:
+ mutex_unlock(&fimc->lock);
return ret;
}
static int fimc_lite_close(struct file *file)
{
struct fimc_lite *fimc = video_drvdata(file);
+ int ret;
+
+ if (mutex_lock_interruptible(&fimc->lock))
+ return -ERESTARTSYS;
if (--fimc->ref_count == 0 && fimc->out_path == FIMC_IO_DMA) {
clear_bit(ST_FLITE_IN_USE, &fimc->state);
if (fimc->ref_count == 0)
vb2_queue_release(&fimc->vb_queue);
- return v4l2_fh_release(file);
+ ret = v4l2_fh_release(file);
+
+ mutex_unlock(&fimc->lock);
+ return ret;
}
static unsigned int fimc_lite_poll(struct file *file,
struct poll_table_struct *wait)
{
struct fimc_lite *fimc = video_drvdata(file);
- return vb2_poll(&fimc->vb_queue, file, wait);
+ int ret;
+
+ if (mutex_lock_interruptible(&fimc->lock))
+ return POLL_ERR;
+
+ ret = vb2_poll(&fimc->vb_queue, file, wait);
+ mutex_unlock(&fimc->lock);
+
+ return ret;
}
static int fimc_lite_mmap(struct file *file, struct vm_area_struct *vma)
{
struct fimc_lite *fimc = video_drvdata(file);
- return vb2_mmap(&fimc->vb_queue, vma);
+ int ret;
+
+ if (mutex_lock_interruptible(&fimc->lock))
+ return -ERESTARTSYS;
+
+ ret = vb2_mmap(&fimc->vb_queue, vma);
+ mutex_unlock(&fimc->lock);
+
+ return ret;
}
static const struct v4l2_file_operations fimc_lite_fops = {
if (fimc_lite_active(fimc))
return -EBUSY;
- media_entity_pipeline_start(&sensor->entity, p->m_pipeline);
+ ret = media_entity_pipeline_start(&sensor->entity, p->m_pipeline);
+ if (ret < 0)
+ return ret;
ret = fimc_pipeline_validate(fimc);
if (ret) {
return 0;
ret = fimc_lite_stop_capture(fimc, suspend);
- if (ret)
+ if (ret < 0 || !fimc_lite_active(fimc))
return ret;
return fimc_pipeline_shutdown(&fimc->pipeline);
int fimc_pipeline_shutdown(struct fimc_pipeline *p)
{
- struct media_entity *me = &p->subdevs[IDX_SENSOR]->entity;
+ struct media_entity *me;
int ret;
+ if (!p || !p->subdevs[IDX_SENSOR])
+ return -EINVAL;
+
+ me = &p->subdevs[IDX_SENSOR]->entity;
mutex_lock(&me->parent->graph_mutex);
ret = __fimc_pipeline_shutdown(p);
mutex_unlock(&me->parent->graph_mutex);
* @source: the source entity to create links to all fimc entities from
* @sensor: sensor subdev linked to FIMC[fimc_id] entity, may be null
* @pad: the source entity pad index
- * @fimc_id: index of the fimc device for which link should be enabled
+ * @link_mask: bitmask of the fimc devices for which link should be enabled
*/
static int __fimc_md_create_fimc_sink_links(struct fimc_md *fmd,
struct media_entity *source,
struct v4l2_subdev *sensor,
- int pad, int fimc_id)
+ int pad, int link_mask)
{
struct fimc_sensor_info *s_info;
struct media_entity *sink;
if (!fmd->fimc[i]->variant->has_cam_if)
continue;
- flags = (i == fimc_id) ? MEDIA_LNK_FL_ENABLED : 0;
+ flags = ((1 << i) & link_mask) ? MEDIA_LNK_FL_ENABLED : 0;
sink = &fmd->fimc[i]->vid_cap.subdev.entity;
ret = media_entity_create_link(source, pad, sink,
if (!fmd->fimc_lite[i])
continue;
- flags = (i == fimc_id) ? MEDIA_LNK_FL_ENABLED : 0;
+ if (link_mask & (1 << (i + FIMC_MAX_DEVS)))
+ flags = MEDIA_LNK_FL_ENABLED;
+ else
+ flags = 0;
sink = &fmd->fimc_lite[i]->subdev.entity;
ret = media_entity_create_link(source, pad, sink,
struct s5p_fimc_isp_info *pdata;
struct fimc_sensor_info *s_info;
struct media_entity *source, *sink;
- int i, pad, fimc_id = 0;
- int ret = 0;
- u32 flags;
+ int i, pad, fimc_id = 0, ret = 0;
+ u32 flags, link_mask = 0;
for (i = 0; i < fmd->num_sensors; i++) {
if (fmd->sensor[i].subdev == NULL)
if (source == NULL)
continue;
+ link_mask = 1 << fimc_id++;
ret = __fimc_md_create_fimc_sink_links(fmd, source, sensor,
- pad, fimc_id++);
+ pad, link_mask);
}
- fimc_id = 0;
for (i = 0; i < ARRAY_SIZE(fmd->csis); i++) {
if (fmd->csis[i].sd == NULL)
continue;
source = &fmd->csis[i].sd->entity;
pad = CSIS_PAD_SOURCE;
+ link_mask = 1 << fimc_id++;
ret = __fimc_md_create_fimc_sink_links(fmd, source, NULL,
- pad, fimc_id++);
+ pad, link_mask);
}
/* Create immutable links between each FIMC's subdev and video node */
}
static int __fimc_md_set_camclk(struct fimc_md *fmd,
- struct fimc_sensor_info *s_info,
- bool on)
+ struct fimc_sensor_info *s_info,
+ bool on)
{
struct s5p_fimc_isp_info *pdata = s_info->pdata;
struct fimc_camclk_info *camclk;
if (WARN_ON(pdata->clk_id >= FIMC_MAX_CAMCLKS) || fmd == NULL)
return -EINVAL;
- if (s_info->clk_on == on)
- return 0;
camclk = &fmd->camclk[pdata->clk_id];
- dbg("camclk %d, f: %lu, clk: %p, on: %d",
- pdata->clk_id, pdata->clk_frequency, camclk, on);
+ dbg("camclk %d, f: %lu, use_count: %d, on: %d",
+ pdata->clk_id, pdata->clk_frequency, camclk->use_count, on);
if (on) {
if (camclk->use_count > 0 &&
clk_set_rate(camclk->clock, pdata->clk_frequency);
camclk->frequency = pdata->clk_frequency;
ret = clk_enable(camclk->clock);
+ dbg("Enabled camclk %d: f: %lu", pdata->clk_id,
+ clk_get_rate(camclk->clock));
}
- s_info->clk_on = 1;
- dbg("Enabled camclk %d: f: %lu", pdata->clk_id,
- clk_get_rate(camclk->clock));
-
return ret;
}
if (--camclk->use_count == 0) {
clk_disable(camclk->clock);
- s_info->clk_on = 0;
dbg("Disabled camclk %d", pdata->clk_id);
}
return ret;
* devices to which sensors can be attached, either directly or through
* the MIPI CSI receiver. The clock is allowed here to be used by
* multiple sensors concurrently if they use same frequency.
- * The per sensor subdev clk_on attribute helps to synchronize accesses
- * to the sclk_cam clocks from the video and media device nodes.
* This function should only be called when the graph mutex is held.
*/
int fimc_md_set_camclk(struct v4l2_subdev *sd, bool on)
* @pdata: sensor's atrributes passed as media device's platform data
* @subdev: image sensor v4l2 subdev
* @host: fimc device the sensor is currently linked to
- * @clk_on: sclk_cam clock's state associated with this subdev
*
* This data structure applies to image sensor and the writeback subdevs.
*/
struct s5p_fimc_isp_info *pdata;
struct v4l2_subdev *subdev;
struct fimc_dev *host;
- bool clk_on;
};
/**
decoded pic */
#define S5P_FIMV_SI_DISPLAY_Y_ADR 0x2010 /* luma addr of displayed pic */
#define S5P_FIMV_SI_DISPLAY_C_ADR 0x2014 /* chroma addrof displayed pic */
+
#define S5P_FIMV_SI_CONSUMED_BYTES 0x2018 /* Consumed number of bytes to
decode a frame */
#define S5P_FIMV_SI_DISPLAY_STATUS 0x201c /* status of decoded picture */
+#define S5P_FIMV_SI_DECODE_Y_ADR 0x2024 /* luma addr of decoded pic */
+#define S5P_FIMV_SI_DECODE_C_ADR 0x2028 /* chroma addrof decoded pic */
+#define S5P_FIMV_SI_DECODE_STATUS 0x202c /* status of decoded picture */
+
#define S5P_FIMV_SI_CH0_SB_ST_ADR 0x2044 /* start addr of stream buf */
#define S5P_FIMV_SI_CH0_SB_FRM_SIZE 0x2048 /* size of stream buf */
#define S5P_FIMV_SI_CH0_DESC_ADR 0x204c /* addr of descriptor buf */
switch (ctrl->id) {
case V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY:
- ctx->loop_filter_mpeg4 = ctrl->val;
+ ctx->display_delay = ctrl->val;
break;
case V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY_ENABLE:
ctx->display_delay_enable = ctrl->val;
break;
case V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER:
- ctx->display_delay = ctrl->val;
+ ctx->loop_filter_mpeg4 = ctrl->val;
break;
case V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE:
ctx->slice_interface = ctrl->val;
for (i = 0; i < NUM_CTRLS; i++) {
if (IS_MFC51_PRIV(controls[i].id)) {
+ memset(&cfg, 0, sizeof(struct v4l2_ctrl_config));
cfg.ops = &s5p_mfc_dec_ctrl_ops;
cfg.id = controls[i].id;
cfg.min = controls[i].minimum;
.minimum = V4L2_MPEG_VIDEO_H264_LEVEL_1_0,
.maximum = V4L2_MPEG_VIDEO_H264_LEVEL_4_0,
.default_value = V4L2_MPEG_VIDEO_H264_LEVEL_1_0,
- .menu_skip_mask = ~(
- (1 << V4L2_MPEG_VIDEO_H264_LEVEL_4_1) |
- (1 << V4L2_MPEG_VIDEO_H264_LEVEL_4_2) |
- (1 << V4L2_MPEG_VIDEO_H264_LEVEL_5_0) |
- (1 << V4L2_MPEG_VIDEO_H264_LEVEL_5_1)
- ),
},
{
.id = V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL,
.type = V4L2_CTRL_TYPE_MENU,
.minimum = V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_UNSPECIFIED,
.maximum = V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_EXTENDED,
- .default_value = 0,
+ .default_value = V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_UNSPECIFIED,
.menu_skip_mask = 0,
},
{
.type = V4L2_CTRL_TYPE_MENU,
.minimum = V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE,
.maximum = V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_SIMPLE,
- .default_value = 0,
+ .default_value = V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE,
.menu_skip_mask = 0,
},
{
mfc_err("failed to try output format\n");
return -EINVAL;
}
+ v4l_bound_align_image(&pix_fmt_mp->width, 8, 1920, 1,
+ &pix_fmt_mp->height, 4, 1080, 1, 0);
} else {
mfc_err("invalid buf type\n");
return -EINVAL;
}
for (i = 0; i < NUM_CTRLS; i++) {
if (IS_MFC51_PRIV(controls[i].id)) {
+ memset(&cfg, 0, sizeof(struct v4l2_ctrl_config));
cfg.ops = &s5p_mfc_enc_ctrl_ops;
cfg.id = controls[i].id;
cfg.min = controls[i].minimum;
S5P_FIMV_SI_DISPLAY_Y_ADR) << \
MFC_OFFSET_SHIFT)
#define s5p_mfc_get_dec_y_adr() (readl(dev->regs_base + \
- S5P_FIMV_SI_DISPLAY_Y_ADR) << \
+ S5P_FIMV_SI_DECODE_Y_ADR) << \
MFC_OFFSET_SHIFT)
#define s5p_mfc_get_dspl_status() readl(dev->regs_base + \
S5P_FIMV_SI_DISPLAY_STATUS)
+#define s5p_mfc_get_dec_status() readl(dev->regs_base + \
+ S5P_FIMV_SI_DECODE_STATUS)
#define s5p_mfc_get_frame_type() (readl(dev->regs_base + \
S5P_FIMV_DECODE_FRAME_TYPE) \
& S5P_FIMV_DECODE_FRAME_MASK)
#ifndef S5P_MFC_SHM_H_
#define S5P_MFC_SHM_H_
-enum MFC_SHM_OFS
-{
+enum MFC_SHM_OFS {
EXTENEDED_DECODE_STATUS = 0x00, /* D */
SET_FRAME_TAG = 0x04, /* D */
GET_FRAME_TAG_TOP = 0x08, /* D */
config VIDEO_SMIAPP
tristate "SMIA++/SMIA sensor support"
- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && HAVE_CLK
select VIDEO_SMIAPP_PLL
---help---
This is a generic driver for SMIA++/SMIA camera modules.
#include <linux/device.h>
#include <linux/gpio.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
#include <linux/v4l2-mediabus.h>
#include <media/v4l2-device.h>
return 0;
if (vt->type == t->mode && analog_ops->get_afc)
vt->afc = analog_ops->get_afc(&t->fe);
- if (t->mode != V4L2_TUNER_RADIO) {
+ if (vt->type != V4L2_TUNER_RADIO) {
vt->capability |= V4L2_TUNER_CAP_NORM;
vt->rangelow = tv_range[0] * 16;
vt->rangehigh = tv_range[1] * 16;
SET_VALID_IOCTL(ops, VIDIOC_TRY_ENCODER_CMD, vidioc_try_encoder_cmd);
SET_VALID_IOCTL(ops, VIDIOC_DECODER_CMD, vidioc_decoder_cmd);
SET_VALID_IOCTL(ops, VIDIOC_TRY_DECODER_CMD, vidioc_try_decoder_cmd);
- if (ops->vidioc_g_parm || vdev->current_norm)
+ if (ops->vidioc_g_parm || vdev->vfl_type == VFL_TYPE_GRABBER)
set_bit(_IOC_NR(VIDIOC_G_PARM), valid_ioctls);
SET_VALID_IOCTL(ops, VIDIOC_S_PARM, vidioc_s_parm);
SET_VALID_IOCTL(ops, VIDIOC_G_TUNER, vidioc_g_tuner);
SET_VALID_IOCTL(ops, VIDIOC_QUERY_DV_PRESET, vidioc_query_dv_preset);
SET_VALID_IOCTL(ops, VIDIOC_S_DV_TIMINGS, vidioc_s_dv_timings);
SET_VALID_IOCTL(ops, VIDIOC_G_DV_TIMINGS, vidioc_g_dv_timings);
+ SET_VALID_IOCTL(ops, VIDIOC_ENUM_DV_TIMINGS, vidioc_enum_dv_timings);
+ SET_VALID_IOCTL(ops, VIDIOC_QUERY_DV_TIMINGS, vidioc_query_dv_timings);
+ SET_VALID_IOCTL(ops, VIDIOC_DV_TIMINGS_CAP, vidioc_dv_timings_cap);
/* yes, really vidioc_subscribe_event */
SET_VALID_IOCTL(ops, VIDIOC_DQEVENT, vidioc_subscribe_event);
SET_VALID_IOCTL(ops, VIDIOC_SUBSCRIBE_EVENT, vidioc_subscribe_event);
break;
ret = 0;
+ p->parm.capture.readbuffers = 2;
if (ops->vidioc_g_std)
ret = ops->vidioc_g_std(file, fh, &std);
if (ret == 0)
} else if (vino_drvdata->decoder
&& (vino_drvdata->decoder_owner == VINO_NO_CHANNEL)) {
int input;
- int data_norm;
+ int data_norm = 0;
v4l2_std_id norm;
input = VINO_INPUT_COMPOSITE;
}
if (vino_drvdata->decoder_owner == vcs->channel) {
- int data_norm;
+ int data_norm = 0;
v4l2_std_id norm;
ret = decoder_call(video, s_routing,
vivi_read(struct file *file, char __user *data, size_t count, loff_t *ppos)
{
struct vivi_dev *dev = video_drvdata(file);
+ int err;
dprintk(dev, 1, "read called\n");
- return vb2_read(&dev->vb_vidq, data, count, ppos,
+ mutex_lock(&dev->mutex);
+ err = vb2_read(&dev->vb_vidq, data, count, ppos,
file->f_flags & O_NONBLOCK);
+ mutex_unlock(&dev->mutex);
+ return err;
}
static unsigned int
depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
select REGMAP_I2C
+ select IRQ_DOMAIN
default n
help
Say yes here if you want support for Texas Instruments TWL6040 audio
+++ /dev/null
-/*
- * Copyright (C) 2011 ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- * Shared definitions and data structures for the AB5500 MFD driver
- */
-
-/* Read/write operation values. */
-#define AB5500_PERM_RD (0x01)
-#define AB5500_PERM_WR (0x02)
-
-/* Read/write permissions. */
-#define AB5500_PERM_RO (AB5500_PERM_RD)
-#define AB5500_PERM_RW (AB5500_PERM_RD | AB5500_PERM_WR)
-
-#define AB5500_MASK_BASE (0x60)
-#define AB5500_MASK_END (0x79)
-#define AB5500_CHIP_ID (0x20)
-
-/**
- * struct ab5500_reg_range
- * @first: the first address of the range
- * @last: the last address of the range
- * @perm: access permissions for the range
- */
-struct ab5500_reg_range {
- u8 first;
- u8 last;
- u8 perm;
-};
-
-/**
- * struct ab5500_i2c_ranges
- * @count: the number of ranges in the list
- * @range: the list of register ranges
- */
-struct ab5500_i2c_ranges {
- u8 nranges;
- u8 bankid;
- const struct ab5500_reg_range *range;
-};
-
-/**
- * struct ab5500_i2c_banks
- * @count: the number of ranges in the list
- * @range: the list of register ranges
- */
-struct ab5500_i2c_banks {
- u8 nbanks;
- const struct ab5500_i2c_ranges *bank;
-};
-
-/**
- * struct ab5500_bank
- * @slave_addr: I2C slave_addr found in AB5500 specification
- * @name: Documentation name of the bank. For reference
- */
-struct ab5500_bank {
- u8 slave_addr;
- const char *name;
-};
-
-static const struct ab5500_bank bankinfo[AB5500_NUM_BANKS] = {
- [AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP] = {
- AB5500_ADDR_VIT_IO_I2C_CLK_TST_OTP, "VIT_IO_I2C_CLK_TST_OTP"},
- [AB5500_BANK_VDDDIG_IO_I2C_CLK_TST] = {
- AB5500_ADDR_VDDDIG_IO_I2C_CLK_TST, "VDDDIG_IO_I2C_CLK_TST"},
- [AB5500_BANK_VDENC] = {AB5500_ADDR_VDENC, "VDENC"},
- [AB5500_BANK_SIM_USBSIM] = {AB5500_ADDR_SIM_USBSIM, "SIM_USBSIM"},
- [AB5500_BANK_LED] = {AB5500_ADDR_LED, "LED"},
- [AB5500_BANK_ADC] = {AB5500_ADDR_ADC, "ADC"},
- [AB5500_BANK_RTC] = {AB5500_ADDR_RTC, "RTC"},
- [AB5500_BANK_STARTUP] = {AB5500_ADDR_STARTUP, "STARTUP"},
- [AB5500_BANK_DBI_ECI] = {AB5500_ADDR_DBI_ECI, "DBI-ECI"},
- [AB5500_BANK_CHG] = {AB5500_ADDR_CHG, "CHG"},
- [AB5500_BANK_FG_BATTCOM_ACC] = {
- AB5500_ADDR_FG_BATTCOM_ACC, "FG_BATCOM_ACC"},
- [AB5500_BANK_USB] = {AB5500_ADDR_USB, "USB"},
- [AB5500_BANK_IT] = {AB5500_ADDR_IT, "IT"},
- [AB5500_BANK_VIBRA] = {AB5500_ADDR_VIBRA, "VIBRA"},
- [AB5500_BANK_AUDIO_HEADSETUSB] = {
- AB5500_ADDR_AUDIO_HEADSETUSB, "AUDIO_HEADSETUSB"},
-};
-
-int ab5500_get_register_interruptible_raw(struct ab5500 *ab, u8 bank, u8 reg,
- u8 *value);
-int ab5500_mask_and_set_register_interruptible_raw(struct ab5500 *ab, u8 bank,
- u8 reg, u8 bitmask, u8 bitvalues);
.reg_bits = 7,
.pad_bits = 1,
.val_bits = 24,
+ .write_flag_mask = 0x80,
.max_register = MC13XXX_NUMREGS,
.cache_type = REGCACHE_NONE,
+ .use_single_rw = 1,
+};
+
+static int mc13xxx_spi_read(void *context, const void *reg, size_t reg_size,
+ void *val, size_t val_size)
+{
+ unsigned char w[4] = { *((unsigned char *) reg), 0, 0, 0};
+ unsigned char r[4];
+ unsigned char *p = val;
+ struct device *dev = context;
+ struct spi_device *spi = to_spi_device(dev);
+ struct spi_transfer t = {
+ .tx_buf = w,
+ .rx_buf = r,
+ .len = 4,
+ };
+
+ struct spi_message m;
+ int ret;
+
+ if (val_size != 3 || reg_size != 1)
+ return -ENOTSUPP;
+
+ spi_message_init(&m);
+ spi_message_add_tail(&t, &m);
+ ret = spi_sync(spi, &m);
+
+ memcpy(p, &r[1], 3);
+
+ return ret;
+}
+
+static int mc13xxx_spi_write(void *context, const void *data, size_t count)
+{
+ struct device *dev = context;
+ struct spi_device *spi = to_spi_device(dev);
+
+ if (count != 4)
+ return -ENOTSUPP;
+
+ return spi_write(spi, data, count);
+}
+
+/*
+ * We cannot use regmap-spi generic bus implementation here.
+ * The MC13783 chip will get corrupted if CS signal is deasserted
+ * and on i.Mx31 SoC (the target SoC for MC13783 PMIC) the SPI controller
+ * has the following errata (DSPhl22960):
+ * "The CSPI negates SS when the FIFO becomes empty with
+ * SSCTL= 0. Software cannot guarantee that the FIFO will not
+ * drain because of higher priority interrupts and the
+ * non-realtime characteristics of the operating system. As a
+ * result, the SS will negate before all of the data has been
+ * transferred to/from the peripheral."
+ * We workaround this by accessing the SPI controller with a
+ * single transfert.
+ */
+
+static struct regmap_bus regmap_mc13xxx_bus = {
+ .write = mc13xxx_spi_write,
+ .read = mc13xxx_spi_read,
};
static int mc13xxx_spi_probe(struct spi_device *spi)
dev_set_drvdata(&spi->dev, mc13xxx);
spi->mode = SPI_MODE_0 | SPI_CS_HIGH;
- spi->bits_per_word = 32;
mc13xxx->dev = &spi->dev;
mutex_init(&mc13xxx->lock);
- mc13xxx->regmap = regmap_init_spi(spi, &mc13xxx_regmap_spi_config);
+ mc13xxx->regmap = regmap_init(&spi->dev, ®map_mc13xxx_bus, &spi->dev,
+ &mc13xxx_regmap_spi_config);
+
if (IS_ERR(mc13xxx->regmap)) {
ret = PTR_ERR(mc13xxx->regmap);
dev_err(mc13xxx->dev, "Failed to initialize register map: %d\n",
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/spinlock.h>
+#include <linux/gpio.h>
#include <plat/cpu.h>
#include <plat/usb.h>
#include <linux/pm_runtime.h>
dev_dbg(dev, "starting TI HSUSB Controller\n");
pm_runtime_get_sync(dev);
- spin_lock_irqsave(&omap->lock, flags);
+ if (pdata->ehci_data->phy_reset) {
+ if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
+ gpio_request_one(pdata->ehci_data->reset_gpio_port[0],
+ GPIOF_OUT_INIT_LOW, "USB1 PHY reset");
+
+ if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
+ gpio_request_one(pdata->ehci_data->reset_gpio_port[1],
+ GPIOF_OUT_INIT_LOW, "USB2 PHY reset");
+
+ /* Hold the PHY in RESET for enough time till DIR is high */
+ udelay(10);
+ }
+
+ spin_lock_irqsave(&omap->lock, flags);
omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION);
dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev);
}
spin_unlock_irqrestore(&omap->lock, flags);
+
+ if (pdata->ehci_data->phy_reset) {
+ /* Hold the PHY in RESET for enough time till
+ * PHY is settled and ready
+ */
+ udelay(10);
+
+ if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
+ gpio_set_value_cansleep
+ (pdata->ehci_data->reset_gpio_port[0], 1);
+
+ if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
+ gpio_set_value_cansleep
+ (pdata->ehci_data->reset_gpio_port[1], 1);
+ }
+
pm_runtime_put_sync(dev);
}
+static void omap_usbhs_deinit(struct device *dev)
+{
+ struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
+ struct usbhs_omap_platform_data *pdata = &omap->platdata;
+
+ if (pdata->ehci_data->phy_reset) {
+ if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
+ gpio_free(pdata->ehci_data->reset_gpio_port[0]);
+
+ if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
+ gpio_free(pdata->ehci_data->reset_gpio_port[1]);
+ }
+}
+
/**
* usbhs_omap_probe - initialize TI-based HCDs
goto end_probe;
err_alloc:
+ omap_usbhs_deinit(&pdev->dev);
iounmap(omap->tll_base);
err_tll:
{
struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev);
+ omap_usbhs_deinit(&pdev->dev);
iounmap(omap->tll_base);
iounmap(omap->uhh_base);
clk_put(omap->init_60m_fclk);
}
}
- ret = regmap_add_irq_chip(palmas->regmap[1], palmas->irq,
+ /* Change IRQ into clear on read mode for efficiency */
+ slave = PALMAS_BASE_TO_SLAVE(PALMAS_INTERRUPT_BASE);
+ addr = PALMAS_BASE_TO_REG(PALMAS_INTERRUPT_BASE, PALMAS_INT_CTRL);
+ reg = PALMAS_INT_CTRL_INT_CLEAR;
+
+ regmap_write(palmas->regmap[slave], addr, reg);
+
+ ret = regmap_add_irq_chip(palmas->regmap[slave], palmas->irq,
IRQF_ONESHOT | IRQF_TRIGGER_LOW, -1, &palmas_irq_chip,
&palmas->irq_data);
if (ret < 0)
goto err;
}
+ children[PALMAS_PMIC_ID].platform_data = pdata->pmic_pdata;
+ children[PALMAS_PMIC_ID].pdata_size = sizeof(*pdata->pmic_pdata);
+
ret = mfd_add_devices(palmas->dev, -1,
children, ARRAY_SIZE(palmas_children),
NULL, regmap_irq_chip_get_base(palmas->irq_data));
{ "twl6035", },
{ "twl6037", },
{ "tps65913", },
+ { /* end */ }
};
MODULE_DEVICE_TABLE(i2c, palmas_i2c_id);
*
* License Terms: GNU General Public License, version 2
* Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * Author: Viresh Kumar <viresh.kumar@st.com> for ST Microelectronics
+ * Author: Viresh Kumar <viresh.linux@gmail.com> for ST Microelectronics
*/
#include <linux/i2c.h>
* Copyright (C) ST Microelectronics SA 2011
*
* License Terms: GNU General Public License, version 2
- * Author: Viresh Kumar <viresh.kumar@st.com> for ST Microelectronics
+ * Author: Viresh Kumar <viresh.linux@gmail.com> for ST Microelectronics
*/
#include <linux/spi/spi.h>
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("STMPE MFD SPI Interface Driver");
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
struct mei_cl *cl,
struct mei_io_list *cmpl_list)
{
- if ((*slots * sizeof(u32)) >= (sizeof(struct mei_msg_hdr) +
+ if ((*slots * sizeof(u32)) < (sizeof(struct mei_msg_hdr) +
sizeof(struct hbm_flow_control))) {
/* return the cancel routine */
list_del(&cb_pos->cb_list);
err = request_threaded_irq(pdev->irq,
NULL,
mei_interrupt_thread_handler,
- 0, mei_driver_name, dev);
+ IRQF_ONESHOT, mei_driver_name, dev);
else
err = request_threaded_irq(pdev->irq,
mei_interrupt_quick_handler,
if (err) {
dev_err(&pdev->dev, "request_threaded_irq failure. irq = %d\n",
pdev->irq);
- goto unmap_memory;
+ goto disable_msi;
}
INIT_DELAYED_WORK(&dev->timer_work, mei_timer);
if (mei_hw_init(dev)) {
mei_disable_interrupts(dev);
flush_scheduled_work();
free_irq(pdev->irq, dev);
+disable_msi:
pci_disable_msi(pdev);
-unmap_memory:
pci_iounmap(pdev, dev->mem_addr);
free_device:
kfree(dev);
pci_release_regions(pdev);
pci_disable_device(pdev);
+
+ misc_deregister(&mei_misc_device);
}
#ifdef CONFIG_PM
static int mei_pci_suspend(struct device *device)
err = request_threaded_irq(pdev->irq,
NULL,
mei_interrupt_thread_handler,
- 0, mei_driver_name, dev);
+ IRQF_ONESHOT, mei_driver_name, dev);
else
err = request_threaded_irq(pdev->irq,
mei_interrupt_quick_handler,
*/
static void __exit mei_exit_module(void)
{
- misc_deregister(&mei_misc_device);
pci_unregister_driver(&mei_driver);
pr_debug("unloaded successfully.\n");
};
static const struct watchdog_info wd_info = {
.identity = INTEL_AMT_WATCHDOG_ID,
- .options = WDIOF_KEEPALIVEPING,
+ .options = WDIOF_KEEPALIVEPING | WDIOF_ALARMONLY,
};
static struct watchdog_device amt_wd_dev = {
if (msg->activate_gru_mq_desc_gpa !=
part_uv->activate_gru_mq_desc_gpa) {
- spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
+ spin_lock(&part_uv->flags_lock);
part_uv->flags &= ~XPC_P_CACHED_ACTIVATE_GRU_MQ_DESC_UV;
- spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags);
+ spin_unlock(&part_uv->flags_lock);
part_uv->activate_gru_mq_desc_gpa =
msg->activate_gru_mq_desc_gpa;
}
struct mmc_request mrq = {NULL};
struct mmc_command cmd = {0};
struct mmc_data data = {0};
- unsigned int timeout_us;
struct scatterlist sg;
cmd.arg = 0;
cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
- data.timeout_ns = card->csd.tacc_ns * 100;
- data.timeout_clks = card->csd.tacc_clks * 100;
-
- timeout_us = data.timeout_ns / 1000;
- timeout_us += data.timeout_clks * 1000 /
- (card->host->ios.clock / 1000);
-
- if (timeout_us > 100000) {
- data.timeout_ns = 100000000;
- data.timeout_clks = 0;
- }
-
data.blksz = 4;
data.blocks = 1;
data.flags = MMC_DATA_READ;
data.sg = &sg;
data.sg_len = 1;
+ mmc_set_data_timeout(&data, card);
mrq.cmd = &cmd;
mrq.data = &data;
goto egpioreq;
ret = request_threaded_irq(irq, NULL, mmc_cd_gpio_irqt,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- cd->label, host);
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
+ IRQF_ONESHOT, cd->label, host);
if (ret < 0)
goto eirqreq;
card->ext_csd.generic_cmd6_time);
}
- if (err)
- pr_err("%s: power class selection for ext_csd_bus_width %d"
- " failed\n", mmc_hostname(card->host), bus_width);
-
return err;
}
EXT_CSD_BUS_WIDTH_8 : EXT_CSD_BUS_WIDTH_4;
err = mmc_select_powerclass(card, ext_csd_bits, ext_csd);
if (err)
- goto err;
+ pr_warning("%s: power class selection to bus width %d"
+ " failed\n", mmc_hostname(card->host),
+ 1 << bus_width);
}
/*
err = mmc_select_powerclass(card, ext_csd_bits[idx][0],
ext_csd);
if (err)
- goto err;
+ pr_warning("%s: power class selection to "
+ "bus width %d failed\n",
+ mmc_hostname(card->host),
+ 1 << bus_width);
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_BUS_WIDTH,
err = mmc_select_powerclass(card, ext_csd_bits[idx][1],
ext_csd);
if (err)
- goto err;
+ pr_warning("%s: power class selection to "
+ "bus width %d ddr %d failed\n",
+ mmc_hostname(card->host),
+ 1 << bus_width, ddr);
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_BUS_WIDTH,
if (!err)
mmc_card_set_sleep(host->card);
} else if (!mmc_host_is_spi(host))
- mmc_deselect_cards(host);
+ err = mmc_deselect_cards(host);
host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200);
mmc_release_host(host);
*/
static int mmc_sd_suspend(struct mmc_host *host)
{
+ int err = 0;
+
BUG_ON(!host);
BUG_ON(!host->card);
mmc_claim_host(host);
if (!mmc_host_is_spi(host))
- mmc_deselect_cards(host);
+ err = mmc_deselect_cards(host);
host->card->state &= ~MMC_STATE_HIGHSPEED;
mmc_release_host(host);
- return 0;
+ return err;
}
/*
if (ret)
return ret;
+ if ((ctrl & SDIO_BUS_WIDTH_MASK) == SDIO_BUS_WIDTH_RESERVED)
+ pr_warning("%s: SDIO_CCCR_IF is invalid: 0x%02x\n",
+ mmc_hostname(card->host), ctrl);
+
+ /* set as 4-bit bus width */
+ ctrl &= ~SDIO_BUS_WIDTH_MASK;
ctrl |= SDIO_BUS_WIDTH_4BIT;
ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_IF, ctrl, NULL);
#define atmci_writel(port,reg,value) \
__raw_writel((value), (port)->regs + reg)
+/*
+ * Fix sconfig's burst size according to atmel MCI. We need to convert them as:
+ * 1 -> 0, 4 -> 1, 8 -> 2, 16 -> 3.
+ *
+ * This can be done by finding most significant bit set.
+ */
+static inline unsigned int atmci_convert_chksize(unsigned int maxburst)
+{
+ if (maxburst > 1)
+ return fls(maxburst) - 2;
+ else
+ return 0;
+}
+
#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
enum dma_data_direction direction;
enum dma_transfer_direction slave_dirn;
unsigned int sglen;
+ u32 maxburst;
u32 iflags;
data->error = -EINPROGRESS;
if (!chan)
return -ENODEV;
- if (host->caps.has_dma)
- atmci_writel(host, ATMCI_DMA, ATMCI_DMA_CHKSIZE(3) | ATMCI_DMAEN);
-
if (data->flags & MMC_DATA_READ) {
direction = DMA_FROM_DEVICE;
host->dma_conf.direction = slave_dirn = DMA_DEV_TO_MEM;
+ maxburst = atmci_convert_chksize(host->dma_conf.src_maxburst);
} else {
direction = DMA_TO_DEVICE;
host->dma_conf.direction = slave_dirn = DMA_MEM_TO_DEV;
+ maxburst = atmci_convert_chksize(host->dma_conf.dst_maxburst);
}
+ atmci_writel(host, ATMCI_DMA, ATMCI_DMA_CHKSIZE(maxburst) | ATMCI_DMAEN);
+
sglen = dma_map_sg(chan->device->dev, data->sg,
data->sg_len, direction);
platform_set_drvdata(pdev, host);
+ setup_timer(&host->timer, atmci_timeout_timer, (unsigned long)host);
+
/* We need at least one slot to succeed */
nr_slots = 0;
ret = -ENODEV;
}
}
- setup_timer(&host->timer, atmci_timeout_timer, (unsigned long)host);
-
dev_info(&pdev->dev,
"Atmel MCI controller at 0x%08lx irq %d, %u slots\n",
host->mapbase, irq, nr_slots);
p->des3 = host->sg_dma;
p->des0 = IDMAC_DES0_ER;
+ mci_writel(host, BMOD, SDMMC_IDMAC_SWRESET);
+
/* Mask out interrupts - get Tx & Rx complete only */
mci_writel(host, IDINTEN, SDMMC_IDMAC_INT_NI | SDMMC_IDMAC_INT_RI |
SDMMC_IDMAC_INT_TI);
u32 div;
if (slot->clock != host->current_speed) {
- if (host->bus_hz % slot->clock)
+ div = host->bus_hz / slot->clock;
+ if (host->bus_hz % slot->clock && host->bus_hz > slot->clock)
/*
* move the + 1 after the divide to prevent
* over-clocking the card.
*/
- div = ((host->bus_hz / slot->clock) >> 1) + 1;
- else
- div = (host->bus_hz / slot->clock) >> 1;
+ div += 1;
+
+ div = (host->bus_hz != slot->clock) ? DIV_ROUND_UP(div, 2) : 0;
dev_info(&slot->mmc->class_dev,
"Bus speed (slot %d) = %dHz (slot req %dHz, actual %dHZ"
mdelay(20);
if (cmd->data) {
- host->data = NULL;
dw_mci_stop_dma(host);
+ host->data = NULL;
}
}
}
if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI);
mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
- set_bit(EVENT_DATA_COMPLETE, &host->pending_events);
host->dma_ops->complete(host);
}
#endif
#ifdef CONFIG_MMC_DW_IDMAC
ctrl = mci_readl(host, BMOD);
- ctrl |= 0x01; /* Software reset of DMA */
+ /* Software reset of DMA */
+ ctrl |= SDMMC_IDMAC_SWRESET;
mci_writel(host, BMOD, ctrl);
#endif
spin_lock_init(&host->lock);
INIT_LIST_HEAD(&host->queue);
-
- host->dma_ops = host->pdata->dma_ops;
- dw_mci_init_dma(host);
-
/*
* Get the host data width - this assumes that HCON has been set with
* the correct values.
}
/* Reset all blocks */
- if (!mci_wait_reset(&host->dev, host)) {
- ret = -ENODEV;
- goto err_dmaunmap;
- }
+ if (!mci_wait_reset(&host->dev, host))
+ return -ENODEV;
+
+ host->dma_ops = host->pdata->dma_ops;
+ dw_mci_init_dma(host);
/* Clear the interrupts for the host controller */
mci_writel(host, RINTSTS, 0xFFFFFFFF);
if (host->vmmc)
regulator_enable(host->vmmc);
- if (host->dma_ops->init)
- host->dma_ops->init(host);
-
if (!mci_wait_reset(&host->dev, host)) {
ret = -ENODEV;
return ret;
}
+ if (host->dma_ops->init)
+ host->dma_ops->init(host);
+
/* Restore the old value at FIFOTH register */
mci_writel(host, FIFOTH, host->fifoth_val);
int bus_width = 0;
pdata->gpio_wp = of_get_named_gpio(np, "wp-gpios", 0);
- if (!pdata->gpio_wp)
- pdata->gpio_wp = -1;
-
pdata->gpio_cd = of_get_named_gpio(np, "cd-gpios", 0);
- if (!pdata->gpio_cd)
- pdata->gpio_cd = -1;
if (of_get_property(np, "cd-inverted", NULL))
pdata->cd_invert = true;
return -EINVAL;
}
+ if (!plat) {
+ plat = devm_kzalloc(&dev->dev, sizeof(*plat), GFP_KERNEL);
+ if (!plat)
+ return -ENOMEM;
+ }
+
if (np)
mmci_dt_populate_generic_pdata(np, plat);
writel(0, host->base + MMCIMASK1);
writel(0xfff, host->base + MMCICLEAR);
+ if (plat->gpio_cd == -EPROBE_DEFER) {
+ ret = -EPROBE_DEFER;
+ goto err_gpio_cd;
+ }
if (gpio_is_valid(plat->gpio_cd)) {
ret = gpio_request(plat->gpio_cd, DRIVER_NAME " (cd)");
if (ret == 0)
if (ret >= 0)
host->gpio_cd_irq = gpio_to_irq(plat->gpio_cd);
}
+ if (plat->gpio_wp == -EPROBE_DEFER) {
+ ret = -EPROBE_DEFER;
+ goto err_gpio_wp;
+ }
if (gpio_is_valid(plat->gpio_wp)) {
ret = gpio_request(plat->gpio_wp, DRIVER_NAME " (wp)");
if (ret == 0)
.owner = THIS_MODULE,
#ifdef CONFIG_PM
.pm = &mxs_mmc_pm_ops,
- .of_match_table = mxs_mmc_dt_ids,
#endif
+ .of_match_table = mxs_mmc_dt_ids,
},
};
.set_ios = mmc_omap_set_ios,
};
-static int __init mmc_omap_new_slot(struct mmc_omap_host *host, int id)
+static int __devinit mmc_omap_new_slot(struct mmc_omap_host *host, int id)
{
struct mmc_omap_slot *slot = NULL;
struct mmc_host *mmc;
}
host->nr_slots = pdata->nr_slots;
+ host->reg_shift = (cpu_is_omap7xx() ? 1 : 2);
+
+ host->mmc_omap_wq = alloc_workqueue("mmc_omap", 0, 0);
+ if (!host->mmc_omap_wq)
+ goto err_plat_cleanup;
+
for (i = 0; i < pdata->nr_slots; i++) {
ret = mmc_omap_new_slot(host, i);
if (ret < 0) {
while (--i >= 0)
mmc_omap_remove_slot(host->slots[i]);
- goto err_plat_cleanup;
+ goto err_destroy_wq;
}
}
- host->reg_shift = (cpu_is_omap7xx() ? 1 : 2);
-
- host->mmc_omap_wq = alloc_workqueue("mmc_omap", 0, 0);
- if (!host->mmc_omap_wq)
- goto err_plat_cleanup;
-
return 0;
+err_destroy_wq:
+ destroy_workqueue(host->mmc_omap_wq);
err_plat_cleanup:
if (pdata->cleanup)
pdata->cleanup(&pdev->dev);
#define BRR_ENABLE (1 << 5)
#define DTO_ENABLE (1 << 20)
#define INIT_STREAM (1 << 1)
-#define ACEN_ACMD12 (1 << 2)
#define DP_SELECT (1 << 21)
#define DDIR (1 << 4)
#define DMA_EN 0x1
#define OMAP_MMC_MAX_CLOCK 52000000
#define DRIVER_NAME "omap_hsmmc"
-#define AUTO_CMD12 (1 << 0) /* Auto CMD12 support */
/*
* One controller can have multiple slots, like on some omap boards using
* omap.c controller driver. Luckily this is not currently done on any known
int reqs_blocked;
int use_reg;
int req_in_progress;
- unsigned int flags;
struct omap_hsmmc_next next_data;
struct omap_mmc_platform_data *pdata;
cmdtype = 0x3;
cmdreg = (cmd->opcode << 24) | (resptype << 16) | (cmdtype << 22);
- if ((host->flags & AUTO_CMD12) && mmc_op_multi(cmd->opcode))
- cmdreg |= ACEN_ACMD12;
if (data) {
cmdreg |= DP_SELECT | MSBS | BCE;
else
data->bytes_xfered = 0;
- if (data->stop && ((!(host->flags & AUTO_CMD12)) || data->error)) {
- omap_hsmmc_start_command(host, data->stop, NULL);
- } else {
- if (data->stop)
- data->stop->resp[0] = OMAP_HSMMC_READ(host->base,
- RSP76);
+ if (!data->stop) {
omap_hsmmc_request_done(host, data->mrq);
+ return;
}
+ omap_hsmmc_start_command(host, data->stop, NULL);
}
/*
host->mapbase = res->start + pdata->reg_offset;
host->base = ioremap(host->mapbase, SZ_4K);
host->power_mode = MMC_POWER_OFF;
- host->flags = AUTO_CMD12;
host->next_data.cookie = 1;
platform_set_drvdata(pdev, host);
if (sc->ext_cd_irq &&
request_threaded_irq(sc->ext_cd_irq, NULL,
sdhci_s3c_gpio_card_detect_thread,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
dev_name(dev), sc) == 0) {
int status = gpio_get_value(sc->ext_cd_gpio);
if (pdata->ext_cd_gpio_invert)
* Support of SDHCI platform devices for spear soc family
*
* Copyright (C) 2010 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* Inspired by sdhci-pltfm.c
*
module_platform_driver(sdhci_driver);
MODULE_DESCRIPTION("SPEAr Secure Digital Host Controller Interface driver");
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_LICENSE("GPL v2");
}
if (count >= 0xF) {
- pr_warning("%s: Too large timeout 0x%x requested for CMD%d!\n",
- mmc_hostname(host->mmc), count, cmd->opcode);
+ DBG("%s: Too large timeout 0x%x requested for CMD%d!\n",
+ mmc_hostname(host->mmc), count, cmd->opcode);
count = 0xE;
}
}
static void mtdoops_do_dump(struct kmsg_dumper *dumper,
- enum kmsg_dump_reason reason, const char *s1, unsigned long l1,
- const char *s2, unsigned long l2)
+ enum kmsg_dump_reason reason)
{
struct mtdoops_context *cxt = container_of(dumper,
struct mtdoops_context, dump);
- unsigned long s1_start, s2_start;
- unsigned long l1_cpy, l2_cpy;
- char *dst;
-
- if (reason != KMSG_DUMP_OOPS &&
- reason != KMSG_DUMP_PANIC)
- return;
/* Only dump oopses if dump_oops is set */
if (reason == KMSG_DUMP_OOPS && !dump_oops)
return;
- dst = cxt->oops_buf + MTDOOPS_HEADER_SIZE; /* Skip the header */
- l2_cpy = min(l2, record_size - MTDOOPS_HEADER_SIZE);
- l1_cpy = min(l1, record_size - MTDOOPS_HEADER_SIZE - l2_cpy);
-
- s2_start = l2 - l2_cpy;
- s1_start = l1 - l1_cpy;
-
- memcpy(dst, s1 + s1_start, l1_cpy);
- memcpy(dst + l1_cpy, s2 + s2_start, l2_cpy);
+ kmsg_dump_get_buffer(dumper, true, cxt->oops_buf + MTDOOPS_HEADER_SIZE,
+ record_size - MTDOOPS_HEADER_SIZE, NULL);
/* Panics must be written immediately */
if (reason != KMSG_DUMP_OOPS)
return;
}
+ cxt->dump.max_reason = KMSG_DUMP_OOPS;
cxt->dump.dump = mtdoops_do_dump;
err = kmsg_dump_register(&cxt->dump);
if (err) {
static int cafe_device_ready(struct mtd_info *mtd)
{
struct cafe_priv *cafe = mtd->priv;
- int result = !!(cafe_readl(cafe, NAND_STATUS) | 0x40000000);
+ int result = !!(cafe_readl(cafe, NAND_STATUS) & 0x40000000);
uint32_t irqs = cafe_readl(cafe, NAND_IRQ);
cafe_writel(cafe, irqs, NAND_IRQ);
*/
memset(chip->oob_poi, ~0, mtd->oobsize);
chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0];
-
- read_page_swap_end(this, buf, mtd->writesize,
- this->payload_virt, this->payload_phys,
- nfc_geo->payload_size,
- payload_virt, payload_phys);
}
+
+ read_page_swap_end(this, buf, mtd->writesize,
+ this->payload_virt, this->payload_phys,
+ nfc_geo->payload_size,
+ payload_virt, payload_phys);
exit_nfc:
return ret;
}
static const char *part_probes[] = { "RedBoot", "cmdlinepart", "ofpart", NULL };
+static void memcpy32_fromio(void *trg, const void __iomem *src, size_t size)
+{
+ int i;
+ u32 *t = trg;
+ const __iomem u32 *s = src;
+
+ for (i = 0; i < (size >> 2); i++)
+ *t++ = __raw_readl(s++);
+}
+
+static void memcpy32_toio(void __iomem *trg, const void *src, int size)
+{
+ int i;
+ u32 __iomem *t = trg;
+ const u32 *s = src;
+
+ for (i = 0; i < (size >> 2); i++)
+ __raw_writel(*s++, t++);
+}
+
static int check_int_v3(struct mxc_nand_host *host)
{
uint32_t tmp;
wait_op_done(host, true);
- memcpy_fromio(host->data_buf, host->main_area0, 16);
+ memcpy32_fromio(host->data_buf, host->main_area0, 16);
}
/* Request the NANDFC to perform a read of the NAND device ID. */
/* Wait for operation to complete */
wait_op_done(host, true);
- memcpy_fromio(host->data_buf, host->main_area0, 16);
+ memcpy32_fromio(host->data_buf, host->main_area0, 16);
if (this->options & NAND_BUSWIDTH_16) {
/* compress the ID info */
if (bfrom) {
for (i = 0; i < n - 1; i++)
- memcpy_fromio(d + i * j, s + i * t, j);
+ memcpy32_fromio(d + i * j, s + i * t, j);
/* the last section */
- memcpy_fromio(d + i * j, s + i * t, mtd->oobsize - i * j);
+ memcpy32_fromio(d + i * j, s + i * t, mtd->oobsize - i * j);
} else {
for (i = 0; i < n - 1; i++)
- memcpy_toio(&s[i * t], &d[i * j], j);
+ memcpy32_toio(&s[i * t], &d[i * j], j);
/* the last section */
- memcpy_toio(&s[i * t], &d[i * j], mtd->oobsize - i * j);
+ memcpy32_toio(&s[i * t], &d[i * j], mtd->oobsize - i * j);
}
}
host->devtype_data->send_page(mtd, NFC_OUTPUT);
- memcpy_fromio(host->data_buf, host->main_area0, mtd->writesize);
+ memcpy32_fromio(host->data_buf, host->main_area0,
+ mtd->writesize);
copy_spare(mtd, true);
break;
break;
case NAND_CMD_PAGEPROG:
- memcpy_toio(host->main_area0, host->data_buf, mtd->writesize);
+ memcpy32_toio(host->main_area0, host->data_buf, mtd->writesize);
copy_spare(mtd, false);
host->devtype_data->send_page(mtd, NFC_INPUT);
host->devtype_data->send_cmd(host, command, true);
/* propagate ecc info to mtd_info */
mtd->ecclayout = chip->ecc.layout;
mtd->ecc_strength = chip->ecc.strength;
+ /*
+ * Initialize bitflip_threshold to its default prior scan_bbt() call.
+ * scan_bbt() might invoke mtd_read(), thus bitflip_threshold must be
+ * properly set.
+ */
+ if (!mtd->bitflip_threshold)
+ mtd->bitflip_threshold = mtd->ecc_strength;
/* Check, if we should skip the bad block table scan */
if (chip->options & NAND_SKIP_BBTSCAN)
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/vmalloc.h>
-#include <asm/div64.h>
+#include <linux/math64.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/string.h>
return kstrdup(buf, GFP_KERNEL);
}
-static uint64_t divide(uint64_t n, uint32_t d)
-{
- do_div(n, d);
- return n;
-}
-
/*
* Initialize the nandsim structure.
*
ns->geom.oobsz = mtd->oobsize;
ns->geom.secsz = mtd->erasesize;
ns->geom.pgszoob = ns->geom.pgsz + ns->geom.oobsz;
- ns->geom.pgnum = divide(ns->geom.totsz, ns->geom.pgsz);
+ ns->geom.pgnum = div_u64(ns->geom.totsz, ns->geom.pgsz);
ns->geom.totszoob = ns->geom.totsz + (uint64_t)ns->geom.pgnum * ns->geom.oobsz;
ns->geom.secshift = ffs(ns->geom.secsz) - 1;
ns->geom.pgshift = chip->page_shift;
if (!rptwear)
return 0;
- wear_eb_count = divide(mtd->size, mtd->erasesize);
+ wear_eb_count = div_u64(mtd->size, mtd->erasesize);
mem = wear_eb_count * sizeof(unsigned long);
if (mem / sizeof(unsigned long) != wear_eb_count) {
NS_ERR("Too many erase blocks for wear reporting\n");
*/
int ubi_debugfs_init(void)
{
+ if (!IS_ENABLED(CONFIG_DEBUG_FS))
+ return 0;
+
dfs_rootdir = debugfs_create_dir("ubi", NULL);
if (IS_ERR_OR_NULL(dfs_rootdir)) {
int err = dfs_rootdir ? -ENODEV : PTR_ERR(dfs_rootdir);
*/
void ubi_debugfs_exit(void)
{
- debugfs_remove(dfs_rootdir);
+ if (IS_ENABLED(CONFIG_DEBUG_FS))
+ debugfs_remove(dfs_rootdir);
}
/* Read an UBI debugfs file */
struct dentry *dent;
struct ubi_debug_info *d = ubi->dbg;
+ if (!IS_ENABLED(CONFIG_DEBUG_FS))
+ return 0;
+
n = snprintf(d->dfs_dir_name, UBI_DFS_DIR_LEN + 1, UBI_DFS_DIR_NAME,
ubi->ubi_num);
if (n == UBI_DFS_DIR_LEN) {
*/
void ubi_debugfs_exit_dev(struct ubi_device *ubi)
{
- debugfs_remove_recursive(ubi->dbg->dfs_dir);
+ if (IS_ENABLED(CONFIG_DEBUG_FS))
+ debugfs_remove_recursive(ubi->dbg->dfs_dir);
}
dbg_wl("flush pending work for LEB %d:%d (%d pending works)",
vol_id, lnum, ubi->works_count);
- down_write(&ubi->work_sem);
while (found) {
struct ubi_work *wrk;
found = 0;
+ down_read(&ubi->work_sem);
spin_lock(&ubi->wl_lock);
list_for_each_entry(wrk, &ubi->works, list) {
if ((vol_id == UBI_ALL || wrk->vol_id == vol_id) &&
spin_unlock(&ubi->wl_lock);
err = wrk->func(ubi, wrk, 0);
- if (err)
- goto out;
+ if (err) {
+ up_read(&ubi->work_sem);
+ return err;
+ }
+
spin_lock(&ubi->wl_lock);
found = 1;
break;
}
}
spin_unlock(&ubi->wl_lock);
+ up_read(&ubi->work_sem);
}
-out:
+ /*
+ * Make sure all the works which have been done in parallel are
+ * finished.
+ */
+ down_write(&ubi->work_sem);
up_write(&ubi->work_sem);
+
return err;
}
#include "bonding.h"
#include "bond_alb.h"
-#ifdef CONFIG_DEBUG_FS
+#if defined(CONFIG_DEBUG_FS) && !defined(CONFIG_NET_NS)
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <net/route.h>
#include <net/net_namespace.h>
#include <net/netns/generic.h>
+#include <net/pkt_sched.h>
#include "bonding.h"
#include "bond_3ad.h"
#include "bond_alb.h"
return next;
}
-#define bond_queue_mapping(skb) (*(u16 *)((skb)->cb))
-
/**
* bond_dev_queue_xmit - Prepare skb for xmit.
*
{
skb->dev = slave_dev;
- skb->queue_mapping = bond_queue_mapping(skb);
+ BUILD_BUG_ON(sizeof(skb->queue_mapping) !=
+ sizeof(qdisc_skb_cb(skb)->bond_queue_mapping));
+ skb->queue_mapping = qdisc_skb_cb(skb)->bond_queue_mapping;
if (unlikely(netpoll_tx_running(slave_dev)))
bond_netpoll_send_skb(bond_get_slave_by_dev(bond, slave_dev), skb);
switch (event) {
case NETDEV_CHANGENAME:
return bond_event_changename(event_bond);
+ case NETDEV_UNREGISTER:
+ bond_remove_proc_entry(event_bond);
+ break;
+ case NETDEV_REGISTER:
+ bond_create_proc_entry(event_bond);
+ break;
default:
break;
}
/*
* Save the original txq to restore before passing to the driver
*/
- bond_queue_mapping(skb) = skb->queue_mapping;
+ qdisc_skb_cb(skb)->bond_queue_mapping = skb->queue_mapping;
if (unlikely(txq >= dev->real_num_tx_queues)) {
do {
bond_work_cancel_all(bond);
- bond_remove_proc_entry(bond);
-
bond_debug_unregister(bond);
__hw_addr_flush(&bond->mc_list);
bond_set_lockdep_class(bond_dev);
- bond_create_proc_entry(bond);
list_add_tail(&bond->bond_list, &bn->dev_list);
bond_prepare_sysfs_group(bond);
}
}
+static const char *bond_slave_link_status(s8 link)
+{
+ static const char * const status[] = {
+ [BOND_LINK_UP] = "up",
+ [BOND_LINK_FAIL] = "going down",
+ [BOND_LINK_DOWN] = "down",
+ [BOND_LINK_BACK] = "going back",
+ };
+
+ return status[link];
+}
+
static void bond_info_show_slave(struct seq_file *seq,
const struct slave *slave)
{
struct bonding *bond = seq->private;
seq_printf(seq, "\nSlave Interface: %s\n", slave->dev->name);
- seq_printf(seq, "MII Status: %s\n",
- (slave->link == BOND_LINK_UP) ? "up" : "down");
+ seq_printf(seq, "MII Status: %s\n", bond_slave_link_status(slave->link));
if (slave->speed == SPEED_UNKNOWN)
seq_printf(seq, "Speed: %s\n", "Unknown");
else
}
}
- pr_info("%s: Unable to set %.*s as primary slave.\n",
- bond->dev->name, (int)strlen(buf) - 1, buf);
+ strncpy(bond->params.primary, ifname, IFNAMSIZ);
+ bond->params.primary[IFNAMSIZ - 1] = 0;
+
+ pr_info("%s: Recording %s as primary, "
+ "but it has not been enslaved to %s yet.\n",
+ bond->dev->name, ifname, bond->dev->name);
out:
write_unlock_bh(&bond->curr_slave_lock);
read_unlock(&bond->lock);
*/
memcpy(rx_buf, (u8 *)piggy_desc,
CFHSI_DESC_SHORT_SZ);
- /* Mark no embedded frame here */
- piggy_desc->offset = 0;
if (desc_pld_len == -EPROTO)
goto out_of_sync;
}
/* Extract any payload in piggyback descriptor. */
if (cfhsi_rx_desc(piggy_desc, cfhsi) < 0)
goto out_of_sync;
+ /* Mark no embedded frame after extracting it */
+ piggy_desc->offset = 0;
}
}
dev_err(&ndev->dev, "%s: Registration error: %d.\n",
__func__, res);
free_netdev(ndev);
+ return -ENODEV;
}
/* Add CAIF HSI device to list. */
spin_lock(&cfhsi_list_lock);
priv->write_reg(priv, &priv->regs->control,
CONTROL_ENABLE_AR);
- if (priv->can.ctrlmode & (CAN_CTRLMODE_LISTENONLY &
- CAN_CTRLMODE_LOOPBACK)) {
+ if ((priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) &&
+ (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)) {
/* loopback + silent mode : useful for hot self-test */
priv->write_reg(priv, &priv->regs->control, CONTROL_EIE |
CONTROL_SIE | CONTROL_IE | CONTROL_TEST);
*
* We iterate from priv->tx_echo to priv->tx_next and check if the
* packet has been transmitted, echo it back to the CAN framework.
- * If we discover a not yet transmitted package, stop looking for more.
+ * If we discover a not yet transmitted packet, stop looking for more.
*/
static void c_can_do_tx(struct net_device *dev)
{
for (/* nix */; (priv->tx_next - priv->tx_echo) > 0; priv->tx_echo++) {
msg_obj_no = get_tx_echo_msg_obj(priv);
val = c_can_read_reg32(priv, &priv->regs->txrqst1);
- if (!(val & (1 << msg_obj_no))) {
+ if (!(val & (1 << (msg_obj_no - 1)))) {
can_get_echo_skb(dev,
msg_obj_no - C_CAN_MSG_OBJ_TX_FIRST);
stats->tx_bytes += priv->read_reg(priv,
& IF_MCONT_DLC_MASK;
stats->tx_packets++;
c_can_inval_msg_object(dev, 0, msg_obj_no);
+ } else {
+ break;
}
}
struct net_device *dev = napi->dev;
struct c_can_priv *priv = netdev_priv(dev);
- irqstatus = priv->read_reg(priv, &priv->regs->interrupt);
+ irqstatus = priv->irqstatus;
if (!irqstatus)
goto end;
static irqreturn_t c_can_isr(int irq, void *dev_id)
{
- u16 irqstatus;
struct net_device *dev = (struct net_device *)dev_id;
struct c_can_priv *priv = netdev_priv(dev);
- irqstatus = priv->read_reg(priv, &priv->regs->interrupt);
- if (!irqstatus)
+ priv->irqstatus = priv->read_reg(priv, &priv->regs->interrupt);
+ if (!priv->irqstatus)
return IRQ_NONE;
/* disable all interrupts and schedule the NAPI */
goto exit_irq_fail;
}
+ napi_enable(&priv->napi);
+
/* start the c_can controller */
c_can_start(dev);
- napi_enable(&priv->napi);
netif_start_queue(dev);
return 0;
unsigned int tx_next;
unsigned int tx_echo;
void *priv; /* for board-specific data */
+ u16 irqstatus;
};
struct net_device *alloc_c_can_dev(void);
struct cc770_platform_data *pdata = pdev->dev.platform_data;
priv->can.clock.freq = pdata->osc_freq;
- if (priv->cpu_interface | CPUIF_DSC)
+ if (priv->cpu_interface & CPUIF_DSC)
priv->can.clock.freq /= 2;
priv->clkout = pdata->cor;
priv->bus_config = pdata->bcr;
return PTR_ERR(pinctrl);
if (pdev->dev.of_node) {
- const u32 *clock_freq_p;
+ const __be32 *clock_freq_p;
clock_freq_p = of_get_property(pdev->dev.of_node,
"clock-frequency", NULL);
if (clock_freq_p)
- clock_freq = *clock_freq_p;
+ clock_freq = be32_to_cpup(clock_freq_p);
}
if (!clock_freq) {
rtnl_lock();
err = __rtnl_link_register(&dummy_link_ops);
- for (i = 0; i < numdummies && !err; i++)
+ for (i = 0; i < numdummies && !err; i++) {
err = dummy_init_one();
+ cond_resched();
+ }
if (err < 0)
__rtnl_link_unregister(&dummy_link_ops);
rtnl_unlock();
if ((phy_data & BMSR_LSTATUS) == 0) {
/* link down */
netif_carrier_off(netdev);
- netif_stop_queue(netdev);
hw->hibernate = true;
if (atl1c_reset_mac(hw) != 0)
if (netif_msg_hw(adapter))
dma_unmap_single(bp->sdev->dma_dev, mapping,
RX_PKT_BUF_SZ, DMA_FROM_DEVICE);
dev_kfree_skb_any(skb);
- skb = __netdev_alloc_skb(bp->dev, RX_PKT_BUF_SZ, GFP_ATOMIC|GFP_DMA);
+ skb = alloc_skb(RX_PKT_BUF_SZ, GFP_ATOMIC | GFP_DMA);
if (skb == NULL)
return -ENOMEM;
mapping = dma_map_single(bp->sdev->dma_dev, skb->data,
dma_unmap_single(bp->sdev->dma_dev, mapping, len,
DMA_TO_DEVICE);
- bounce_skb = __netdev_alloc_skb(dev, len, GFP_ATOMIC | GFP_DMA);
+ bounce_skb = alloc_skb(len, GFP_ATOMIC | GFP_DMA);
if (!bounce_skb)
goto err_out;
int k, last;
if (skb == NULL) {
- j++;
+ j = NEXT_TX_BD(j);
continue;
}
tx_buf->skb = NULL;
last = tx_buf->nr_frags;
- j++;
- for (k = 0; k < last; k++, j++) {
+ j = NEXT_TX_BD(j);
+ for (k = 0; k < last; k++, j = NEXT_TX_BD(j)) {
tx_buf = &txr->tx_buf_ring[TX_RING_IDX(j)];
dma_unmap_page(&bp->pdev->dev,
dma_unmap_addr(tx_buf, mapping),
#define ETH_RX_ERROR_FALGS ETH_FAST_PATH_RX_CQE_PHY_DECODE_ERR_FLG
-#define BNX2X_IP_CSUM_ERR(cqe) \
- (!((cqe)->fast_path_cqe.status_flags & \
- ETH_FAST_PATH_RX_CQE_IP_XSUM_NO_VALIDATION_FLG) && \
- ((cqe)->fast_path_cqe.type_error_flags & \
- ETH_FAST_PATH_RX_CQE_IP_BAD_XSUM_FLG))
-
-#define BNX2X_L4_CSUM_ERR(cqe) \
- (!((cqe)->fast_path_cqe.status_flags & \
- ETH_FAST_PATH_RX_CQE_L4_XSUM_NO_VALIDATION_FLG) && \
- ((cqe)->fast_path_cqe.type_error_flags & \
- ETH_FAST_PATH_RX_CQE_L4_BAD_XSUM_FLG))
-
-#define BNX2X_RX_CSUM_OK(cqe) \
- (!(BNX2X_L4_CSUM_ERR(cqe) || BNX2X_IP_CSUM_ERR(cqe)))
-
#define BNX2X_PRS_FLAG_OVERETH_IPV4(flags) \
(((le16_to_cpu(flags) & \
PARSING_FLAGS_OVER_ETHERNET_PROTOCOL) >> \
if ((netif_tx_queue_stopped(txq)) &&
(bp->state == BNX2X_STATE_OPEN) &&
- (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 3))
+ (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 4))
netif_tx_wake_queue(txq);
__netif_tx_unlock(txq);
return 0;
}
+static void bnx2x_csum_validate(struct sk_buff *skb, union eth_rx_cqe *cqe,
+ struct bnx2x_fastpath *fp)
+{
+ /* Do nothing if no IP/L4 csum validation was done */
+
+ if (cqe->fast_path_cqe.status_flags &
+ (ETH_FAST_PATH_RX_CQE_IP_XSUM_NO_VALIDATION_FLG |
+ ETH_FAST_PATH_RX_CQE_L4_XSUM_NO_VALIDATION_FLG))
+ return;
+
+ /* If both IP/L4 validation were done, check if an error was found. */
+
+ if (cqe->fast_path_cqe.type_error_flags &
+ (ETH_FAST_PATH_RX_CQE_IP_BAD_XSUM_FLG |
+ ETH_FAST_PATH_RX_CQE_L4_BAD_XSUM_FLG))
+ fp->eth_q_stats.hw_csum_err++;
+ else
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+}
int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
{
skb_checksum_none_assert(skb);
- if (bp->dev->features & NETIF_F_RXCSUM) {
+ if (bp->dev->features & NETIF_F_RXCSUM)
+ bnx2x_csum_validate(skb, cqe, fp);
- if (likely(BNX2X_RX_CSUM_OK(cqe)))
- skb->ip_summed = CHECKSUM_UNNECESSARY;
- else
- fp->eth_q_stats.hw_csum_err++;
- }
skb_record_rx_queue(skb, fp->rx_queue);
/* we split the first BD into headers and data BDs
* to ease the pain of our fellow microcode engineers
* we use one mapping for both BDs
- * So far this has only been observed to happen
- * in Other Operating Systems(TM)
*/
static noinline u16 bnx2x_tx_split(struct bnx2x *bp,
struct bnx2x_fp_txdata *txdata,
txdata->tx_bd_prod += nbd;
- if (unlikely(bnx2x_tx_avail(bp, txdata) < MAX_SKB_FRAGS + 3)) {
+ if (unlikely(bnx2x_tx_avail(bp, txdata) < MAX_SKB_FRAGS + 4)) {
netif_tx_stop_queue(txq);
/* paired memory barrier is in bnx2x_tx_int(), we have to keep
smp_mb();
fp->eth_q_stats.driver_xoff++;
- if (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 3)
+ if (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 4)
netif_tx_wake_queue(txq);
}
txdata->tx_pkt++;
#define I2C_BSC0 0
#define I2C_BSC1 1
#define I2C_WA_RETRY_CNT 3
+#define I2C_WA_PWR_ITER (I2C_WA_RETRY_CNT - 1)
#define MCPR_IMC_COMMAND_READ_OP 1
#define MCPR_IMC_COMMAND_WRITE_OP 2
return -EINVAL;
}
+static void bnx2x_warpcore_power_module(struct link_params *params,
+ struct bnx2x_phy *phy,
+ u8 power)
+{
+ u32 pin_cfg;
+ struct bnx2x *bp = params->bp;
+
+ pin_cfg = (REG_RD(bp, params->shmem_base +
+ offsetof(struct shmem_region,
+ dev_info.port_hw_config[params->port].e3_sfp_ctrl)) &
+ PORT_HW_CFG_E3_PWR_DIS_MASK) >>
+ PORT_HW_CFG_E3_PWR_DIS_SHIFT;
+
+ if (pin_cfg == PIN_CFG_NA)
+ return;
+ DP(NETIF_MSG_LINK, "Setting SFP+ module power to %d using pin cfg %d\n",
+ power, pin_cfg);
+ /* Low ==> corresponding SFP+ module is powered
+ * high ==> the SFP+ module is powered down
+ */
+ bnx2x_set_cfg_pin(bp, pin_cfg, power ^ 1);
+}
static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy,
struct link_params *params,
u16 addr, u8 byte_cnt,
/* 4 byte aligned address */
addr32 = addr & (~0x3);
do {
+ if (cnt == I2C_WA_PWR_ITER) {
+ bnx2x_warpcore_power_module(params, phy, 0);
+ /* Note that 100us are not enough here */
+ usleep_range(1000,1000);
+ bnx2x_warpcore_power_module(params, phy, 1);
+ }
rc = bnx2x_bsc_read(params, phy, 0xa0, addr32, 0, byte_cnt,
data_array);
} while ((rc != 0) && (++cnt < I2C_WA_RETRY_CNT));
bnx2x_set_e1e2_module_fault_led(params, gpio_mode);
}
-static void bnx2x_warpcore_power_module(struct link_params *params,
- struct bnx2x_phy *phy,
- u8 power)
-{
- u32 pin_cfg;
- struct bnx2x *bp = params->bp;
-
- pin_cfg = (REG_RD(bp, params->shmem_base +
- offsetof(struct shmem_region,
- dev_info.port_hw_config[params->port].e3_sfp_ctrl)) &
- PORT_HW_CFG_E3_PWR_DIS_MASK) >>
- PORT_HW_CFG_E3_PWR_DIS_SHIFT;
-
- if (pin_cfg == PIN_CFG_NA)
- return;
- DP(NETIF_MSG_LINK, "Setting SFP+ module power to %d using pin cfg %d\n",
- power, pin_cfg);
- /* Low ==> corresponding SFP+ module is powered
- * high ==> the SFP+ module is powered down
- */
- bnx2x_set_cfg_pin(bp, pin_cfg, power ^ 1);
-}
-
static void bnx2x_warpcore_hw_reset(struct bnx2x_phy *phy,
struct link_params *params)
{
msleep(1);
- if (!(CHIP_IS_E1(bp)))
+ if (!(CHIP_IS_E1x(bp)))
port = BP_PATH(bp);
else
port = params->port;
}
if (atomic_read(&ulp_ops->ref_count) != 0)
- netdev_warn(dev->netdev, "Failed waiting for ref count to go to zero\n");
+ pr_warn("%s: Failed waiting for ref count to go to zero\n",
+ __func__);
return 0;
out_unlock:
uinfo = &udev->cnic_uinfo;
- uinfo->mem[0].addr = dev->netdev->base_addr;
+ uinfo->mem[0].addr = pci_resource_start(dev->pcidev, 0);
uinfo->mem[0].internal_addr = dev->regview;
- uinfo->mem[0].size = dev->netdev->mem_end - dev->netdev->mem_start;
uinfo->mem[0].memtype = UIO_MEM_PHYS;
if (test_bit(CNIC_F_BNX2_CLASS, &dev->flags)) {
+ uinfo->mem[0].size = MB_GET_CID_ADDR(TX_TSS_CID +
+ TX_MAX_TSS_RINGS + 1);
uinfo->mem[1].addr = (unsigned long) cp->status_blk.gen &
PAGE_MASK;
if (cp->ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX)
uinfo->name = "bnx2_cnic";
} else if (test_bit(CNIC_F_BNX2X_CLASS, &dev->flags)) {
+ uinfo->mem[0].size = pci_resource_len(dev->pcidev, 0);
+
uinfo->mem[1].addr = (unsigned long) cp->bnx2x_def_status_blk &
PAGE_MASK;
uinfo->mem[1].size = sizeof(*cp->bnx2x_def_status_blk);
}
}
- if (tg3_flag(tp, 5755_PLUS))
+ if (tg3_flag(tp, 5755_PLUS) ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
tg3_flag_set(tp, SHORT_DMA_BUG);
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719)
goto done;
if (compl_status == MCC_STATUS_UNAUTHORIZED_REQUEST) {
- dev_warn(&adapter->pdev->dev, "This domain(VM) is not "
- "permitted to execute this cmd (opcode %d)\n",
- opcode);
+ dev_warn(&adapter->pdev->dev,
+ "opcode %d-%d is not permitted\n",
+ opcode, subsystem);
} else {
extd_status = (compl->status >> CQE_STATUS_EXTD_SHIFT) &
CQE_STATUS_EXTD_MASK;
- dev_err(&adapter->pdev->dev, "Cmd (opcode %d) failed:"
- "status %d, extd-status %d\n",
- opcode, compl_status, extd_status);
+ dev_err(&adapter->pdev->dev,
+ "opcode %d-%d failed:status %d-%d\n",
+ opcode, subsystem, compl_status, extd_status);
}
}
done:
u32 rsvd0[BE_TXP_SW_SZ];
struct be_erx_stats_v1 erx;
struct be_pmem_stats pmem;
- u32 rsvd1[3];
+ u32 rsvd1[18];
};
struct be_cmd_req_get_stats_v1 {
copied = make_tx_wrbs(adapter, txq, skb, wrb_cnt, dummy_wrb);
if (copied) {
+ int gso_segs = skb_shinfo(skb)->gso_segs;
+
/* record the sent skb in the sent_skb table */
BUG_ON(txo->sent_skb_list[start]);
txo->sent_skb_list[start] = skb;
be_txq_notify(adapter, txq->id, wrb_cnt);
- be_tx_stats_update(txo, wrb_cnt, copied,
- skb_shinfo(skb)->gso_segs, stopped);
+ be_tx_stats_update(txo, wrb_cnt, copied, gso_segs, stopped);
} else {
txq->head = start;
dev_kfree_skb_any(skb);
netdev->flags |= IFF_MULTICAST;
- netif_set_gso_max_size(netdev, 65535);
+ netif_set_gso_max_size(netdev, 65535 - ETH_HLEN);
netdev->netdev_ops = &be_netdev_ops;
if (priv->mode == MQ_MG_MODE) {
baddr = ®s->txic0;
for_each_set_bit(i, &tx_mask, priv->num_tx_queues) {
- if (likely(priv->tx_queue[i]->txcoalescing)) {
- gfar_write(baddr + i, 0);
+ gfar_write(baddr + i, 0);
+ if (likely(priv->tx_queue[i]->txcoalescing))
gfar_write(baddr + i, priv->tx_queue[i]->txic);
- }
}
baddr = ®s->rxic0;
for_each_set_bit(i, &rx_mask, priv->num_rx_queues) {
- if (likely(priv->rx_queue[i]->rxcoalescing)) {
- gfar_write(baddr + i, 0);
+ gfar_write(baddr + i, 0);
+ if (likely(priv->rx_queue[i]->rxcoalescing))
gfar_write(baddr + i, priv->rx_queue[i]->rxic);
- }
}
}
}
return NETDEV_TX_OK;
}
- /* Steal sock reference for processing TX time stamps */
- swap(skb_new->sk, skb->sk);
- swap(skb_new->destructor, skb->destructor);
- kfree_skb(skb);
+ if (skb->sk)
+ skb_set_owner_w(skb_new, skb->sk);
+ consume_skb(skb);
skb = skb_new;
}
config IGB_PTP
bool "PTP Hardware Clock (PHC)"
- default y
- depends on IGB && PTP_1588_CLOCK
+ default n
+ depends on IGB && EXPERIMENTAL
+ select PPS
+ select PTP_1588_CLOCK
---help---
Say Y here if you want to use PTP Hardware Clock (PHC) in the
driver. Only the basic clock operations have been implemented.
config IXGBE_PTP
bool "PTP Clock Support"
default n
- depends on IXGBE && PTP_1588_CLOCK
+ depends on IXGBE && EXPERIMENTAL
+ select PPS
+ select PTP_1588_CLOCK
---help---
Say Y here if you want support for 1588 Timestamping with a
PHC device, using the PTP 1588 Clock support. This is
ctrl = er32(CTRL);
status = er32(STATUS);
rxcw = er32(RXCW);
+ /* SYNCH bit and IV bit are sticky */
+ udelay(10);
+ rxcw = er32(RXCW);
if ((rxcw & E1000_RXCW_SYNCH) && !(rxcw & E1000_RXCW_IV)) {
#define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */
#define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */
#define E1000_RXD_ERR_TCPE 0x20 /* TCP/UDP Checksum Error */
+#define E1000_RXD_ERR_IPE 0x40 /* IP Checksum Error */
#define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */
#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
* When SoL/IDER sessions are active, autoneg/speed/duplex
* cannot be changed
*/
- if (hw->phy.ops.check_reset_block(hw)) {
+ if (hw->phy.ops.check_reset_block &&
+ hw->phy.ops.check_reset_block(hw)) {
e_err("Cannot change link characteristics when SoL/IDER is active.\n");
return -EINVAL;
}
* PHY loopback cannot be performed if SoL/IDER
* sessions are active
*/
- if (hw->phy.ops.check_reset_block(hw)) {
+ if (hw->phy.ops.check_reset_block &&
+ hw->phy.ops.check_reset_block(hw)) {
e_err("Cannot do PHY loopback test when SoL/IDER is active.\n");
*data = 0;
goto out;
**/
static bool e1000_phy_is_accessible_pchlan(struct e1000_hw *hw)
{
- u16 phy_reg;
- u32 phy_id;
+ u16 phy_reg = 0;
+ u32 phy_id = 0;
+ s32 ret_val;
+ u16 retry_count;
+
+ for (retry_count = 0; retry_count < 2; retry_count++) {
+ ret_val = e1e_rphy_locked(hw, PHY_ID1, &phy_reg);
+ if (ret_val || (phy_reg == 0xFFFF))
+ continue;
+ phy_id = (u32)(phy_reg << 16);
- e1e_rphy_locked(hw, PHY_ID1, &phy_reg);
- phy_id = (u32)(phy_reg << 16);
- e1e_rphy_locked(hw, PHY_ID2, &phy_reg);
- phy_id |= (u32)(phy_reg & PHY_REVISION_MASK);
+ ret_val = e1e_rphy_locked(hw, PHY_ID2, &phy_reg);
+ if (ret_val || (phy_reg == 0xFFFF)) {
+ phy_id = 0;
+ continue;
+ }
+ phy_id |= (u32)(phy_reg & PHY_REVISION_MASK);
+ break;
+ }
if (hw->phy.id) {
if (hw->phy.id == phy_id)
return true;
- } else {
- if ((phy_id != 0) && (phy_id != PHY_REVISION_MASK))
- hw->phy.id = phy_id;
+ } else if (phy_id) {
+ hw->phy.id = phy_id;
+ hw->phy.revision = (u32)(phy_reg & ~PHY_REVISION_MASK);
return true;
}
- return false;
+ /*
+ * In case the PHY needs to be in mdio slow mode,
+ * set slow mode and try to get the PHY id again.
+ */
+ hw->phy.ops.release(hw);
+ ret_val = e1000_set_mdio_slow_mode_hv(hw);
+ if (!ret_val)
+ ret_val = e1000e_get_phy_id(hw);
+ hw->phy.ops.acquire(hw);
+
+ return !ret_val;
}
/**
* In the case of the phy reset being blocked, we already have a link.
* We do not need to set it up again.
*/
- if (hw->phy.ops.check_reset_block(hw))
+ if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw))
return 0;
/*
* @sk_buff: socket buffer with received data
**/
static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
- __le16 csum, struct sk_buff *skb)
+ struct sk_buff *skb)
{
u16 status = (u16)status_err;
u8 errors = (u8)(status_err >> 24);
if (status & E1000_RXD_STAT_IXSM)
return;
- /* TCP/UDP checksum error bit is set */
- if (errors & E1000_RXD_ERR_TCPE) {
+ /* TCP/UDP checksum error bit or IP checksum error bit is set */
+ if (errors & (E1000_RXD_ERR_TCPE | E1000_RXD_ERR_IPE)) {
/* let the stack verify checksum errors */
adapter->hw_csum_err++;
return;
return;
/* It must be a TCP or UDP packet with a valid checksum */
- if (status & E1000_RXD_STAT_TCPCS) {
- /* TCP checksum is good */
- skb->ip_summed = CHECKSUM_UNNECESSARY;
- } else {
- /*
- * IP fragment with UDP payload
- * Hardware complements the payload checksum, so we undo it
- * and then put the value in host order for further stack use.
- */
- __sum16 sum = (__force __sum16)swab16((__force u16)csum);
- skb->csum = csum_unfold(~sum);
- skb->ip_summed = CHECKSUM_COMPLETE;
- }
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
adapter->hw_csum_good++;
}
skb_put(skb, length);
/* Receive Checksum Offload */
- e1000_rx_checksum(adapter, staterr,
- rx_desc->wb.lower.hi_dword.csum_ip.csum, skb);
+ e1000_rx_checksum(adapter, staterr, skb);
e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb);
total_rx_bytes += skb->len;
total_rx_packets++;
- e1000_rx_checksum(adapter, staterr,
- rx_desc->wb.lower.hi_dword.csum_ip.csum, skb);
+ e1000_rx_checksum(adapter, staterr, skb);
e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb);
}
}
- /* Receive Checksum Offload XXX recompute due to CRC strip? */
- e1000_rx_checksum(adapter, staterr,
- rx_desc->wb.lower.hi_dword.csum_ip.csum, skb);
+ /* Receive Checksum Offload */
+ e1000_rx_checksum(adapter, staterr, skb);
e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb);
/* Enable Receive Checksum Offload for TCP and UDP */
rxcsum = er32(RXCSUM);
- if (adapter->netdev->features & NETIF_F_RXCSUM) {
+ if (adapter->netdev->features & NETIF_F_RXCSUM)
rxcsum |= E1000_RXCSUM_TUOFL;
-
- /*
- * IPv4 payload checksum for UDP fragments must be
- * used in conjunction with packet-split.
- */
- if (adapter->rx_ps_pages)
- rxcsum |= E1000_RXCSUM_IPPCSE;
- } else {
+ else
rxcsum &= ~E1000_RXCSUM_TUOFL;
- /* no need to clear IPPCSE as it defaults to 0 */
- }
ew32(RXCSUM, rxcsum);
if (adapter->hw.mac.type == e1000_pch2lan) {
int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
/* Jumbo frame support */
- if (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) {
- if (!(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
- e_err("Jumbo Frames not supported.\n");
- return -EINVAL;
- }
-
- /*
- * IP payload checksum (enabled with jumbos/packet-split when
- * Rx checksum is enabled) and generation of RSS hash is
- * mutually exclusive in the hardware.
- */
- if ((netdev->features & NETIF_F_RXCSUM) &&
- (netdev->features & NETIF_F_RXHASH)) {
- e_err("Jumbo frames cannot be enabled when both receive checksum offload and receive hashing are enabled. Disable one of the receive offload features before enabling jumbos.\n");
- return -EINVAL;
- }
+ if ((max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) &&
+ !(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
+ e_err("Jumbo Frames not supported.\n");
+ return -EINVAL;
}
/* Supported frame sizes */
NETIF_F_RXALL)))
return 0;
- /*
- * IP payload checksum (enabled with jumbos/packet-split when Rx
- * checksum is enabled) and generation of RSS hash is mutually
- * exclusive in the hardware.
- */
- if (adapter->rx_ps_pages &&
- (features & NETIF_F_RXCSUM) && (features & NETIF_F_RXHASH)) {
- e_err("Enabling both receive checksum offload and receive hashing is not possible with jumbo frames. Disable jumbos or enable only one of the receive offload features.\n");
- return -EINVAL;
- }
-
if (changed & NETIF_F_RXFCS) {
if (features & NETIF_F_RXFCS) {
adapter->flags2 &= ~FLAG2_CRC_STRIPPING;
adapter->hw.phy.ms_type = e1000_ms_hw_default;
}
- if (hw->phy.ops.check_reset_block(hw))
+ if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw))
e_info("PHY reset is blocked due to SOL/IDER session.\n");
/* Set initial default active device features */
if (!(adapter->flags & FLAG_HAS_AMT))
e1000e_release_hw_control(adapter);
err_eeprom:
- if (!hw->phy.ops.check_reset_block(hw))
+ if (hw->phy.ops.check_reset_block && !hw->phy.ops.check_reset_block(hw))
e1000_phy_hw_reset(&adapter->hw);
err_hw_init:
kfree(adapter->tx_ring);
s32 ret_val;
u32 ctrl;
- ret_val = phy->ops.check_reset_block(hw);
- if (ret_val)
- return 0;
+ if (phy->ops.check_reset_block) {
+ ret_val = phy->ops.check_reset_block(hw);
+ if (ret_val)
+ return 0;
+ }
ret_val = phy->ops.acquire(hw);
if (ret_val)
mac->rar_entry_count = E1000_RAR_ENTRIES_82580;
break;
case e1000_i350:
- case e1000_i210:
- case e1000_i211:
mac->rar_entry_count = E1000_RAR_ENTRIES_I350;
break;
default:
struct igbvf_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
- if ((ec->rx_coalesce_usecs > IGBVF_MAX_ITR_USECS) ||
- ((ec->rx_coalesce_usecs > 3) &&
- (ec->rx_coalesce_usecs < IGBVF_MIN_ITR_USECS)) ||
- (ec->rx_coalesce_usecs == 2))
- return -EINVAL;
-
- /* convert to rate of irq's per second */
- if (ec->rx_coalesce_usecs && ec->rx_coalesce_usecs <= 3) {
+ if ((ec->rx_coalesce_usecs >= IGBVF_MIN_ITR_USECS) &&
+ (ec->rx_coalesce_usecs <= IGBVF_MAX_ITR_USECS)) {
+ adapter->current_itr = ec->rx_coalesce_usecs << 2;
+ adapter->requested_itr = 1000000000 /
+ (adapter->current_itr * 256);
+ } else if ((ec->rx_coalesce_usecs == 3) ||
+ (ec->rx_coalesce_usecs == 2)) {
adapter->current_itr = IGBVF_START_ITR;
adapter->requested_itr = ec->rx_coalesce_usecs;
- } else {
- adapter->current_itr = ec->rx_coalesce_usecs << 2;
+ } else if (ec->rx_coalesce_usecs == 0) {
+ /*
+ * The user's desire is to turn off interrupt throttling
+ * altogether, but due to HW limitations, we can't do that.
+ * Instead we set a very small value in EITR, which would
+ * allow ~967k interrupts per second, but allow the adapter's
+ * internal clocking to still function properly.
+ */
+ adapter->current_itr = 4;
adapter->requested_itr = 1000000000 /
(adapter->current_itr * 256);
- }
+ } else
+ return -EINVAL;
writel(adapter->current_itr,
hw->hw_addr + adapter->rx_ring->itr_register);
__IXGBE_HANG_CHECK_ARMED,
__IXGBE_RX_RSC_ENABLED,
__IXGBE_RX_CSUM_UDP_ZERO_ERR,
- __IXGBE_RX_FCOE_BUFSZ,
+ __IXGBE_RX_FCOE,
};
#define check_for_tx_hang(ring) \
#if defined(IXGBE_FCOE) && (PAGE_SIZE < 8192)
static inline unsigned int ixgbe_rx_pg_order(struct ixgbe_ring *ring)
{
- return test_bit(__IXGBE_RX_FCOE_BUFSZ, &ring->state) ? 1 : 0;
+ return test_bit(__IXGBE_RX_FCOE, &ring->state) ? 1 : 0;
}
#else
#define ixgbe_rx_pg_order(_ring) 0
f = &adapter->ring_feature[RING_F_FCOE];
if ((rxr_idx >= f->mask) &&
(rxr_idx < f->mask + f->indices))
- set_bit(__IXGBE_RX_FCOE_BUFSZ, &ring->state);
+ set_bit(__IXGBE_RX_FCOE, &ring->state);
}
#endif /* IXGBE_FCOE */
#ifdef IXGBE_FCOE
/**
* ixgbe_rx_is_fcoe - check the rx desc for incoming pkt type
- * @adapter: address of board private structure
+ * @ring: structure containing ring specific data
* @rx_desc: advanced rx descriptor
*
* Returns : true if it is FCoE pkt
*/
-static inline bool ixgbe_rx_is_fcoe(struct ixgbe_adapter *adapter,
+static inline bool ixgbe_rx_is_fcoe(struct ixgbe_ring *ring,
union ixgbe_adv_rx_desc *rx_desc)
{
__le16 pkt_info = rx_desc->wb.lower.lo_dword.hs_rss.pkt_info;
- return (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) &&
+ return test_bit(__IXGBE_RX_FCOE, &ring->state) &&
((pkt_info & cpu_to_le16(IXGBE_RXDADV_PKTTYPE_ETQF_MASK)) ==
(cpu_to_le16(IXGBE_ETQF_FILTER_FCOE <<
IXGBE_RXDADV_PKTTYPE_ETQF_SHIFT)));
/* alloc new page for storage */
if (likely(!page)) {
- page = alloc_pages(GFP_ATOMIC | __GFP_COLD,
+ page = alloc_pages(GFP_ATOMIC | __GFP_COLD | __GFP_COMP,
ixgbe_rx_pg_order(rx_ring));
if (unlikely(!page)) {
rx_ring->rx_stats.alloc_rx_page_failed++;
union ixgbe_adv_rx_desc *rx_desc,
struct sk_buff *skb)
{
+ struct net_device *dev = rx_ring->netdev;
+
ixgbe_update_rsc_stats(rx_ring, skb);
ixgbe_rx_hash(rx_ring, rx_desc, skb);
ixgbe_ptp_rx_hwtstamp(rx_ring->q_vector, skb);
#endif
- if (ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_VP)) {
+ if ((dev->features & NETIF_F_HW_VLAN_RX) &&
+ ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_VP)) {
u16 vid = le16_to_cpu(rx_desc->wb.upper.vlan);
__vlan_hwaccel_put_tag(skb, vid);
}
skb_record_rx_queue(skb, rx_ring->queue_index);
- skb->protocol = eth_type_trans(skb, rx_ring->netdev);
+ skb->protocol = eth_type_trans(skb, dev);
}
static void ixgbe_rx_skb(struct ixgbe_q_vector *q_vector,
skb->truesize -= ixgbe_rx_bufsz(rx_ring);
}
+#ifdef IXGBE_FCOE
+ /* do not attempt to pad FCoE Frames as this will disrupt DDP */
+ if (ixgbe_rx_is_fcoe(rx_ring, rx_desc))
+ return false;
+
+#endif
/* if skb_pad returns an error the skb was freed */
if (unlikely(skb->len < 60)) {
int pad_len = 60 - skb->len;
#ifdef IXGBE_FCOE
/* if ddp, not passing to ULD unless for FCP_RSP or error */
- if (ixgbe_rx_is_fcoe(adapter, rx_desc)) {
+ if (ixgbe_rx_is_fcoe(rx_ring, rx_desc)) {
ddp_bytes = ixgbe_fcoe_ddp(adapter, rx_desc, skb);
if (!ddp_bytes) {
dev_kfree_skb_any(skb);
if (hw->mac.type == ixgbe_mac_82598EB)
netif_set_gso_max_size(adapter->netdev, 32768);
-
- /* Enable VLAN tag insert/strip */
- adapter->netdev->features |= NETIF_F_HW_VLAN_RX;
-
hw->mac.ops.set_vfta(&adapter->hw, 0, 0, true);
#ifdef IXGBE_FCOE
return -EINVAL;
}
+ if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
+ e_err(drv, "Enable failed, SR-IOV enabled\n");
+ return -EINVAL;
+ }
+
/* Hardware supports up to 8 traffic classes */
if (tc > adapter->dcb_cfg.num_tcs.pg_tcs ||
(hw->mac.type == ixgbe_mac_82598EB &&
{
struct ixgbe_adapter *adapter = netdev_priv(netdev);
-#ifdef CONFIG_DCB
- if (adapter->flags & IXGBE_FLAG_DCB_ENABLED)
- features &= ~NETIF_F_HW_VLAN_RX;
-#endif
-
/* return error if RXHASH is being enabled when RSS is not supported */
if (!(adapter->flags & IXGBE_FLAG_RSS_ENABLED))
features &= ~NETIF_F_RXHASH;
if (!(adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE))
features &= ~NETIF_F_LRO;
-
return features;
}
need_reset = true;
}
+ if (features & NETIF_F_HW_VLAN_RX)
+ ixgbe_vlan_strip_enable(adapter);
+ else
+ ixgbe_vlan_strip_disable(adapter);
+
if (changed & NETIF_F_RXALL)
need_reset = true;
{
struct ixgbe_hw *hw = &adapter->hw;
u32 incval = 0;
+ u32 timinca = 0;
u32 shift = 0;
u32 cycle_speed;
unsigned long flags;
break;
}
- /* Bail if the cycle speed didn't change */
- if (adapter->cycle_speed == cycle_speed)
+ /*
+ * grab the current TIMINCA value from the register so that it can be
+ * double checked. If the register value has been cleared, it must be
+ * reset to the correct value for generating a cyclecounter. If
+ * TIMINCA is zero, the SYSTIME registers do not increment at all.
+ */
+ timinca = IXGBE_READ_REG(hw, IXGBE_TIMINCA);
+
+ /* Bail if the cycle speed didn't change and TIMINCA is non-zero */
+ if (adapter->cycle_speed == cycle_speed && timinca)
return;
/* disable the SDP clock out */
unsigned int i, eop, count = 0;
unsigned int total_bytes = 0, total_packets = 0;
+ if (test_bit(__IXGBEVF_DOWN, &adapter->state))
+ return true;
+
i = tx_ring->next_to_clean;
eop = tx_ring->tx_buffer_info[i].next_to_watch;
eop_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop);
r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues);
for (i = 0; i < q_vector->txr_count; i++) {
tx_ring = &(adapter->tx_ring[r_idx]);
- tx_ring->total_bytes = 0;
- tx_ring->total_packets = 0;
ixgbevf_clean_tx_irq(adapter, tx_ring);
r_idx = find_next_bit(q_vector->txr_idx, adapter->num_tx_queues,
r_idx + 1);
struct ixgbe_hw *hw = &adapter->hw;
struct ixgbevf_ring *rx_ring;
int r_idx;
- int i;
-
- r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
- for (i = 0; i < q_vector->rxr_count; i++) {
- rx_ring = &(adapter->rx_ring[r_idx]);
- rx_ring->total_bytes = 0;
- rx_ring->total_packets = 0;
- r_idx = find_next_bit(q_vector->rxr_idx, adapter->num_rx_queues,
- r_idx + 1);
- }
if (!q_vector->rxr_count)
return IRQ_HANDLED;
/*
* Hardware-specific parameters.
*/
+#if defined(CONFIG_HAVE_CLK)
struct clk *clk;
+#endif
unsigned int t_clk;
};
mp->dev = dev;
/*
- * Get the clk rate, if there is one, otherwise use the default.
+ * Start with a default rate, and if there is a clock, allow
+ * it to override the default.
*/
+ mp->t_clk = 133000000;
+#if defined(CONFIG_HAVE_CLK)
mp->clk = clk_get(&pdev->dev, (pdev->id ? "1" : "0"));
if (!IS_ERR(mp->clk)) {
clk_prepare_enable(mp->clk);
mp->t_clk = clk_get_rate(mp->clk);
- } else {
- mp->t_clk = 133000000;
- printk(KERN_WARNING "Unable to get clock");
}
-
+#endif
set_params(mp, pd);
netif_set_real_num_tx_queues(dev, mp->txq_count);
netif_set_real_num_rx_queues(dev, mp->rxq_count);
phy_detach(mp->phy);
cancel_work_sync(&mp->tx_timeout_task);
+#if defined(CONFIG_HAVE_CLK)
if (!IS_ERR(mp->clk)) {
clk_disable_unprepare(mp->clk);
clk_put(mp->clk);
}
+#endif
+
free_netdev(mp->dev);
platform_set_drvdata(pdev, NULL);
struct sky2_port *sky2 = netdev_priv(dev);
netdev_features_t changed = dev->features ^ features;
- if (changed & NETIF_F_RXCSUM) {
- bool on = features & NETIF_F_RXCSUM;
- sky2_write32(sky2->hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR),
- on ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
+ if ((changed & NETIF_F_RXCSUM) &&
+ !(sky2->hw->flags & SKY2_HW_NEW_LE)) {
+ sky2_write32(sky2->hw,
+ Q_ADDR(rxqaddr[sky2->port], Q_CSR),
+ (features & NETIF_F_RXCSUM)
+ ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
}
if (changed & NETIF_F_RXHASH)
if (priv->rx_cq[i].buf)
mlx4_en_destroy_cq(priv, &priv->rx_cq[i]);
}
+
+ if (priv->base_tx_qpn) {
+ mlx4_qp_release_range(priv->mdev->dev, priv->base_tx_qpn, priv->tx_ring_num);
+ priv->base_tx_qpn = 0;
+ }
}
int mlx4_en_alloc_resources(struct mlx4_en_priv *priv)
{
struct mlx4_en_port_profile *prof = priv->prof;
int i;
- int base_tx_qpn, err;
+ int err;
- err = mlx4_qp_reserve_range(priv->mdev->dev, priv->tx_ring_num, 256, &base_tx_qpn);
+ err = mlx4_qp_reserve_range(priv->mdev->dev, priv->tx_ring_num, 256, &priv->base_tx_qpn);
if (err) {
en_err(priv, "failed reserving range for TX rings\n");
return err;
prof->tx_ring_size, i, TX))
goto err;
- if (mlx4_en_create_tx_ring(priv, &priv->tx_ring[i], base_tx_qpn + i,
+ if (mlx4_en_create_tx_ring(priv, &priv->tx_ring[i], priv->base_tx_qpn + i,
prof->tx_ring_size, TXBB_SIZE))
goto err;
}
err:
en_err(priv, "Failed to allocate NIC resources\n");
- mlx4_qp_release_range(priv->mdev->dev, base_tx_qpn, priv->tx_ring_num);
return -ENOMEM;
}
en_warn(priv, "Using %d RX rings\n", prof->rx_ring_num);
/* Configure port */
+ mlx4_en_calc_rx_buf(dev);
err = mlx4_SET_PORT_general(mdev->dev, priv->port,
- MLX4_EN_MIN_MTU,
- 0, 0, 0, 0);
+ priv->rx_skb_size + ETH_FCS_LEN,
+ prof->tx_pause, prof->tx_ppp,
+ prof->rx_pause, prof->rx_ppp);
if (err) {
en_err(priv, "Failed setting port general configurations "
"for port %d, with error %d\n", priv->port, err);
if (err == -EBUSY && (dev->flags & MLX4_FLAG_MSI_X) &&
!mlx4_is_mfunc(dev)) {
dev->flags &= ~MLX4_FLAG_MSI_X;
+ dev->caps.num_comp_vectors = 1;
+ dev->caps.comp_pool = 0;
pci_disable_msix(pdev);
err = mlx4_setup_hca(dev);
}
int vids[128];
bool wol;
struct device *ddev;
+ int base_tx_qpn;
#ifdef CONFIG_MLX4_EN_DCB
struct ieee_ets ets;
if (slave != dev->caps.function)
memset(inbox->buf, 0, 256);
if (dev->flags & MLX4_FLAG_OLD_PORT_CMDS) {
- *(u8 *) inbox->buf = !!reset_qkey_viols << 6;
+ *(u8 *) inbox->buf |= !!reset_qkey_viols << 6;
((__be32 *) inbox->buf)[2] = agg_cap_mask;
} else {
- ((u8 *) inbox->buf)[3] = !!reset_qkey_viols;
+ ((u8 *) inbox->buf)[3] |= !!reset_qkey_viols;
((__be32 *) inbox->buf)[1] = agg_cap_mask;
}
/* Update stats */
ndev->stats.tx_packets++;
ndev->stats.tx_bytes += skb->len;
-
- /* Free buffer */
- dev_kfree_skb_irq(skb);
}
+ dev_kfree_skb_irq(skb);
txcidx = readl(LPC_ENET_TXCONSUMEINDEX(pldat->net_base));
}
- if (netif_queue_stopped(ndev))
- netif_wake_queue(ndev);
+ if (pldat->num_used_tx_buffs <= ENET_TX_DESC/2) {
+ if (netif_queue_stopped(ndev))
+ netif_wake_queue(ndev);
+ }
}
static int __lpc_handle_recv(struct net_device *ndev, int budget)
.ndo_set_rx_mode = lpc_eth_set_multicast_list,
.ndo_do_ioctl = lpc_eth_ioctl,
.ndo_set_mac_address = lpc_set_mac_address,
+ .ndo_change_mtu = eth_change_mtu,
};
static int lpc_eth_drv_probe(struct platform_device *pdev)
for (i = 0; i < QLCNIC_MAX_PCI_FUNC; i++) {
pfn = pci_info[i].id;
- if (pfn > QLCNIC_MAX_PCI_FUNC) {
+ if (pfn >= QLCNIC_MAX_PCI_FUNC) {
ret = QL_STATUS_INVALID_PARAM;
goto err_eswitch;
}
case RTL_GIGA_MAC_VER_22:
case RTL_GIGA_MAC_VER_23:
case RTL_GIGA_MAC_VER_24:
+ case RTL_GIGA_MAC_VER_34:
RTL_W32(RxConfig, RX128_INT_EN | RX_MULTI_EN | RX_DMA_BURST);
break;
default:
if (status & LinkChg)
__rtl8169_check_link_status(dev, tp, tp->mmio_addr, true);
- napi_disable(&tp->napi);
- rtl_irq_disable(tp);
-
- napi_enable(&tp->napi);
- napi_schedule(&tp->napi);
+ rtl_irq_enable_all(tp);
}
static void rtl_task(struct work_struct *work)
}
/* Packet receive function */
-static int sh_eth_rx(struct net_device *ndev)
+static int sh_eth_rx(struct net_device *ndev, u32 intr_status)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
struct sh_eth_rxdesc *rxdesc;
/* Restart Rx engine if stopped. */
/* If we don't need to check status, don't. -KDU */
if (!(sh_eth_read(ndev, EDRRR) & EDRRR_R)) {
- /* fix the values for the next receiving */
- mdp->cur_rx = mdp->dirty_rx = (sh_eth_read(ndev, RDFAR) -
- sh_eth_read(ndev, RDLAR)) >> 4;
+ /* fix the values for the next receiving if RDE is set */
+ if (intr_status & EESR_RDE)
+ mdp->cur_rx = mdp->dirty_rx =
+ (sh_eth_read(ndev, RDFAR) -
+ sh_eth_read(ndev, RDLAR)) >> 4;
sh_eth_write(ndev, EDRRR_R, EDRRR);
}
EESR_RTSF | /* short frame recv */
EESR_PRE | /* PHY-LSI recv error */
EESR_CERF)){ /* recv frame CRC error */
- sh_eth_rx(ndev);
+ sh_eth_rx(ndev, intr_status);
}
/* Tx Check */
if STMMAC_ETH
config STMMAC_PLATFORM
- tristate "STMMAC platform bus support"
+ bool "STMMAC Platform bus support"
depends on STMMAC_ETH
default y
---help---
If unsure, say N.
config STMMAC_PCI
- tristate "STMMAC support on PCI bus (EXPERIMENTAL)"
+ bool "STMMAC PCI bus support (EXPERIMENTAL)"
depends on STMMAC_ETH && PCI && EXPERIMENTAL
---help---
This is to select the Synopsys DWMAC available on PCI devices,
desc->des3 = desc->des2 + BUF_SIZE_4KiB;
priv->hw->desc->prepare_tx_desc(desc, 1, bmax,
csum);
-
+ wmb();
entry = (++priv->cur_tx) % txsize;
desc = priv->dma_tx + entry;
len, DMA_TO_DEVICE);
desc->des3 = desc->des2 + BUF_SIZE_4KiB;
priv->hw->desc->prepare_tx_desc(desc, 0, len, csum);
+ wmb();
priv->hw->desc->set_tx_owner(desc);
priv->tx_skbuff[entry] = NULL;
} else {
#include <linux/clk.h>
#include <linux/stmmac.h>
#include <linux/phy.h>
+#include <linux/pci.h>
#include "common.h"
#ifdef CONFIG_STMMAC_TIMER
#include "stmmac_timer.h"
extern void stmmac_set_ethtool_ops(struct net_device *netdev);
extern const struct stmmac_desc_ops enh_desc_ops;
extern const struct stmmac_desc_ops ndesc_ops;
-
int stmmac_freeze(struct net_device *ndev);
int stmmac_restore(struct net_device *ndev);
int stmmac_resume(struct net_device *ndev);
static inline int stmmac_clk_enable(struct stmmac_priv *priv)
{
if (!IS_ERR(priv->stmmac_clk))
- return clk_enable(priv->stmmac_clk);
+ return clk_prepare_enable(priv->stmmac_clk);
return 0;
}
if (IS_ERR(priv->stmmac_clk))
return;
- clk_disable(priv->stmmac_clk);
+ clk_disable_unprepare(priv->stmmac_clk);
}
static inline int stmmac_clk_get(struct stmmac_priv *priv)
{
return 0;
}
#endif /* CONFIG_HAVE_CLK */
+
+
+#ifdef CONFIG_STMMAC_PLATFORM
+extern struct platform_driver stmmac_pltfr_driver;
+static inline int stmmac_register_platform(void)
+{
+ int err;
+
+ err = platform_driver_register(&stmmac_pltfr_driver);
+ if (err)
+ pr_err("stmmac: failed to register the platform driver\n");
+
+ return err;
+}
+static inline void stmmac_unregister_platform(void)
+{
+ platform_driver_register(&stmmac_pltfr_driver);
+}
+#else
+static inline int stmmac_register_platform(void)
+{
+ pr_debug("stmmac: do not register the platf driver\n");
+
+ return -EINVAL;
+}
+static inline void stmmac_unregister_platform(void)
+{
+}
+#endif /* CONFIG_STMMAC_PLATFORM */
+
+#ifdef CONFIG_STMMAC_PCI
+extern struct pci_driver stmmac_pci_driver;
+static inline int stmmac_register_pci(void)
+{
+ int err;
+
+ err = pci_register_driver(&stmmac_pci_driver);
+ if (err)
+ pr_err("stmmac: failed to register the PCI driver\n");
+
+ return err;
+}
+static inline void stmmac_unregister_pci(void)
+{
+ pci_unregister_driver(&stmmac_pci_driver);
+}
+#else
+static inline int stmmac_register_pci(void)
+{
+ pr_debug("stmmac: do not register the PCI driver\n");
+
+ return -EINVAL;
+}
+static inline void stmmac_unregister_pci(void)
+{
+}
+#endif /* CONFIG_STMMAC_PCI */
/**
* stmmac_selec_desc_mode
- * @dev : device pointer
- * Description: select the Enhanced/Alternate or Normal descriptors */
+ * @priv : private structure
+ * Description: select the Enhanced/Alternate or Normal descriptors
+ */
static void stmmac_selec_desc_mode(struct stmmac_priv *priv)
{
if (priv->plat->enh_desc) {
priv->hw->desc->prepare_tx_desc(desc, 0, len, csum_insertion);
wmb();
priv->hw->desc->set_tx_owner(desc);
+ wmb();
}
/* Interrupt on completition only for the latest segment */
/* To avoid raise condition */
priv->hw->desc->set_tx_owner(first);
+ wmb();
priv->cur_tx++;
}
wmb();
priv->hw->desc->set_rx_owner(p + entry);
+ wmb();
}
}
/**
* stmmac_dvr_probe
* @device: device pointer
+ * @plat_dat: platform data pointer
+ * @addr: iobase memory address
* Description: this is the main probe function used to
* call the alloc_etherdev, allocate the priv structure.
*/
}
#endif /* CONFIG_PM */
+/* Driver can be configured w/ and w/ both PCI and Platf drivers
+ * depending on the configuration selected.
+ */
+static int __init stmmac_init(void)
+{
+ int err_plt = 0;
+ int err_pci = 0;
+
+ err_plt = stmmac_register_platform();
+ err_pci = stmmac_register_pci();
+
+ if ((err_pci) && (err_plt)) {
+ pr_err("stmmac: driver registration failed\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void __exit stmmac_exit(void)
+{
+ stmmac_unregister_platform();
+ stmmac_unregister_pci();
+}
+
+module_init(stmmac_init);
+module_exit(stmmac_exit);
+
#ifndef MODULE
static int __init stmmac_cmdline_opt(char *str)
{
MODULE_DEVICE_TABLE(pci, stmmac_id_table);
-static struct pci_driver stmmac_driver = {
+struct pci_driver stmmac_pci_driver = {
.name = STMMAC_RESOURCE_NAME,
.id_table = stmmac_id_table,
.probe = stmmac_pci_probe,
#endif
};
-/**
- * stmmac_init_module - Entry point for the driver
- * Description: This function is the entry point for the driver.
- */
-static int __init stmmac_init_module(void)
-{
- int ret;
-
- ret = pci_register_driver(&stmmac_driver);
- if (ret < 0)
- pr_err("%s: ERROR: driver registration failed\n", __func__);
-
- return ret;
-}
-
-/**
- * stmmac_cleanup_module - Cleanup routine for the driver
- * Description: This function is the cleanup routine for the driver.
- */
-static void __exit stmmac_cleanup_module(void)
-{
- pci_unregister_driver(&stmmac_driver);
-}
-
-module_init(stmmac_init_module);
-module_exit(stmmac_cleanup_module);
-
MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet PCI driver");
MODULE_AUTHOR("Rayagond Kokatanur <rayagond.kokatanur@vayavyalabs.com>");
MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>");
};
MODULE_DEVICE_TABLE(of, stmmac_dt_ids);
-static struct platform_driver stmmac_driver = {
+struct platform_driver stmmac_pltfr_driver = {
.probe = stmmac_pltfr_probe,
.remove = stmmac_pltfr_remove,
.driver = {
},
};
-module_platform_driver(stmmac_driver);
-
MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet PLATFORM driver");
MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>");
MODULE_LICENSE("GPL");
static void niu_tx_work(struct niu *np, struct tx_ring_info *rp)
{
struct netdev_queue *txq;
- unsigned int tx_bytes;
u16 pkt_cnt, tmp;
int cons, index;
u64 cs;
netif_printk(np, tx_done, KERN_DEBUG, np->dev,
"%s() pkt_cnt[%u] cons[%d]\n", __func__, pkt_cnt, cons);
- tx_bytes = 0;
- tmp = pkt_cnt;
- while (tmp--) {
- tx_bytes += rp->tx_buffs[cons].skb->len;
+ while (pkt_cnt--)
cons = release_tx_packet(np, rp, cons);
- }
rp->cons = cons;
smp_mb();
- netdev_tx_completed_queue(txq, pkt_cnt, tx_bytes);
-
out:
if (unlikely(netif_tx_queue_stopped(txq) &&
(niu_tx_avail(rp) > NIU_TX_WAKEUP_THRESH(rp)))) {
struct tx_ring_info *rp = &np->tx_rings[i];
niu_free_tx_ring_info(np, rp);
- netdev_tx_reset_queue(netdev_get_tx_queue(np->dev, i));
}
kfree(np->tx_rings);
np->tx_rings = NULL;
prod = NEXT_TX(rp, prod);
}
- netdev_tx_sent_queue(txq, skb->len);
-
if (prod < rp->prod)
rp->wrap_bit ^= TX_RING_KICK_WRAP;
rp->prod = prod;
#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <linux/device.h>
+#include <linux/module.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/dma-mapping.h>
depends on TILE
default y
select CRC32
+ select TILE_GXIO_MPIPE if TILEGX
+ select HIGH_RES_TIMERS if TILEGX
---help---
This is a standard Linux network device driver for the
on-chip Tilera Gigabit Ethernet and XAUI interfaces.
obj-$(CONFIG_TILE_NET) += tile_net.o
ifdef CONFIG_TILEGX
-tile_net-objs := tilegx.o mpipe.o iorpc_mpipe.o dma_queue.o
+tile_net-y := tilegx.o
else
-tile_net-objs := tilepro.o
+tile_net-y := tilepro.o
endif
--- /dev/null
+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include <linux/sched.h>
+#include <linux/kernel.h> /* printk() */
+#include <linux/slab.h> /* kmalloc() */
+#include <linux/errno.h> /* error codes */
+#include <linux/types.h> /* size_t */
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/irq.h>
+#include <linux/netdevice.h> /* struct device, and other headers */
+#include <linux/etherdevice.h> /* eth_type_trans */
+#include <linux/skbuff.h>
+#include <linux/ioctl.h>
+#include <linux/cdev.h>
+#include <linux/hugetlb.h>
+#include <linux/in6.h>
+#include <linux/timer.h>
+#include <linux/hrtimer.h>
+#include <linux/ktime.h>
+#include <linux/io.h>
+#include <linux/ctype.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+
+#include <asm/checksum.h>
+#include <asm/homecache.h>
+#include <gxio/mpipe.h>
+#include <arch/sim.h>
+
+/* Default transmit lockup timeout period, in jiffies. */
+#define TILE_NET_TIMEOUT (5 * HZ)
+
+/* The maximum number of distinct channels (idesc.channel is 5 bits). */
+#define TILE_NET_CHANNELS 32
+
+/* Maximum number of idescs to handle per "poll". */
+#define TILE_NET_BATCH 128
+
+/* Maximum number of packets to handle per "poll". */
+#define TILE_NET_WEIGHT 64
+
+/* Number of entries in each iqueue. */
+#define IQUEUE_ENTRIES 512
+
+/* Number of entries in each equeue. */
+#define EQUEUE_ENTRIES 2048
+
+/* Total header bytes per equeue slot. Must be big enough for 2 bytes
+ * of NET_IP_ALIGN alignment, plus 14 bytes (?) of L2 header, plus up to
+ * 60 bytes of actual TCP header. We round up to align to cache lines.
+ */
+#define HEADER_BYTES 128
+
+/* Maximum completions per cpu per device (must be a power of two).
+ * ISSUE: What is the right number here? If this is too small, then
+ * egress might block waiting for free space in a completions array.
+ * ISSUE: At the least, allocate these only for initialized echannels.
+ */
+#define TILE_NET_MAX_COMPS 64
+
+#define MAX_FRAGS (MAX_SKB_FRAGS + 1)
+
+/* Size of completions data to allocate.
+ * ISSUE: Probably more than needed since we don't use all the channels.
+ */
+#define COMPS_SIZE (TILE_NET_CHANNELS * sizeof(struct tile_net_comps))
+
+/* Size of NotifRing data to allocate. */
+#define NOTIF_RING_SIZE (IQUEUE_ENTRIES * sizeof(gxio_mpipe_idesc_t))
+
+/* Timeout to wake the per-device TX timer after we stop the queue.
+ * We don't want the timeout too short (adds overhead, and might end
+ * up causing stop/wake/stop/wake cycles) or too long (affects performance).
+ * For the 10 Gb NIC, 30 usec means roughly 30+ 1500-byte packets.
+ */
+#define TX_TIMER_DELAY_USEC 30
+
+/* Timeout to wake the per-cpu egress timer to free completions. */
+#define EGRESS_TIMER_DELAY_USEC 1000
+
+MODULE_AUTHOR("Tilera Corporation");
+MODULE_LICENSE("GPL");
+
+/* A "packet fragment" (a chunk of memory). */
+struct frag {
+ void *buf;
+ size_t length;
+};
+
+/* A single completion. */
+struct tile_net_comp {
+ /* The "complete_count" when the completion will be complete. */
+ s64 when;
+ /* The buffer to be freed when the completion is complete. */
+ struct sk_buff *skb;
+};
+
+/* The completions for a given cpu and echannel. */
+struct tile_net_comps {
+ /* The completions. */
+ struct tile_net_comp comp_queue[TILE_NET_MAX_COMPS];
+ /* The number of completions used. */
+ unsigned long comp_next;
+ /* The number of completions freed. */
+ unsigned long comp_last;
+};
+
+/* The transmit wake timer for a given cpu and echannel. */
+struct tile_net_tx_wake {
+ struct hrtimer timer;
+ struct net_device *dev;
+};
+
+/* Info for a specific cpu. */
+struct tile_net_info {
+ /* The NAPI struct. */
+ struct napi_struct napi;
+ /* Packet queue. */
+ gxio_mpipe_iqueue_t iqueue;
+ /* Our cpu. */
+ int my_cpu;
+ /* True if iqueue is valid. */
+ bool has_iqueue;
+ /* NAPI flags. */
+ bool napi_added;
+ bool napi_enabled;
+ /* Number of small sk_buffs which must still be provided. */
+ unsigned int num_needed_small_buffers;
+ /* Number of large sk_buffs which must still be provided. */
+ unsigned int num_needed_large_buffers;
+ /* A timer for handling egress completions. */
+ struct hrtimer egress_timer;
+ /* True if "egress_timer" is scheduled. */
+ bool egress_timer_scheduled;
+ /* Comps for each egress channel. */
+ struct tile_net_comps *comps_for_echannel[TILE_NET_CHANNELS];
+ /* Transmit wake timer for each egress channel. */
+ struct tile_net_tx_wake tx_wake[TILE_NET_CHANNELS];
+};
+
+/* Info for egress on a particular egress channel. */
+struct tile_net_egress {
+ /* The "equeue". */
+ gxio_mpipe_equeue_t *equeue;
+ /* The headers for TSO. */
+ unsigned char *headers;
+};
+
+/* Info for a specific device. */
+struct tile_net_priv {
+ /* Our network device. */
+ struct net_device *dev;
+ /* The primary link. */
+ gxio_mpipe_link_t link;
+ /* The primary channel, if open, else -1. */
+ int channel;
+ /* The "loopify" egress link, if needed. */
+ gxio_mpipe_link_t loopify_link;
+ /* The "loopify" egress channel, if open, else -1. */
+ int loopify_channel;
+ /* The egress channel (channel or loopify_channel). */
+ int echannel;
+ /* Total stats. */
+ struct net_device_stats stats;
+};
+
+/* Egress info, indexed by "priv->echannel" (lazily created as needed). */
+static struct tile_net_egress egress_for_echannel[TILE_NET_CHANNELS];
+
+/* Devices currently associated with each channel.
+ * NOTE: The array entry can become NULL after ifconfig down, but
+ * we do not free the underlying net_device structures, so it is
+ * safe to use a pointer after reading it from this array.
+ */
+static struct net_device *tile_net_devs_for_channel[TILE_NET_CHANNELS];
+
+/* A mutex for "tile_net_devs_for_channel". */
+static DEFINE_MUTEX(tile_net_devs_for_channel_mutex);
+
+/* The per-cpu info. */
+static DEFINE_PER_CPU(struct tile_net_info, per_cpu_info);
+
+/* The "context" for all devices. */
+static gxio_mpipe_context_t context;
+
+/* Buffer sizes and mpipe enum codes for buffer stacks.
+ * See arch/tile/include/gxio/mpipe.h for the set of possible values.
+ */
+#define BUFFER_SIZE_SMALL_ENUM GXIO_MPIPE_BUFFER_SIZE_128
+#define BUFFER_SIZE_SMALL 128
+#define BUFFER_SIZE_LARGE_ENUM GXIO_MPIPE_BUFFER_SIZE_1664
+#define BUFFER_SIZE_LARGE 1664
+
+/* The small/large "buffer stacks". */
+static int small_buffer_stack = -1;
+static int large_buffer_stack = -1;
+
+/* Amount of memory allocated for each buffer stack. */
+static size_t buffer_stack_size;
+
+/* The actual memory allocated for the buffer stacks. */
+static void *small_buffer_stack_va;
+static void *large_buffer_stack_va;
+
+/* The buckets. */
+static int first_bucket = -1;
+static int num_buckets = 1;
+
+/* The ingress irq. */
+static int ingress_irq = -1;
+
+/* Text value of tile_net.cpus if passed as a module parameter. */
+static char *network_cpus_string;
+
+/* The actual cpus in "network_cpus". */
+static struct cpumask network_cpus_map;
+
+/* If "loopify=LINK" was specified, this is "LINK". */
+static char *loopify_link_name;
+
+/* If "tile_net.custom" was specified, this is non-NULL. */
+static char *custom_str;
+
+/* The "tile_net.cpus" argument specifies the cpus that are dedicated
+ * to handle ingress packets.
+ *
+ * The parameter should be in the form "tile_net.cpus=m-n[,x-y]", where
+ * m, n, x, y are integer numbers that represent the cpus that can be
+ * neither a dedicated cpu nor a dataplane cpu.
+ */
+static bool network_cpus_init(void)
+{
+ char buf[1024];
+ int rc;
+
+ if (network_cpus_string == NULL)
+ return false;
+
+ rc = cpulist_parse_crop(network_cpus_string, &network_cpus_map);
+ if (rc != 0) {
+ pr_warn("tile_net.cpus=%s: malformed cpu list\n",
+ network_cpus_string);
+ return false;
+ }
+
+ /* Remove dedicated cpus. */
+ cpumask_and(&network_cpus_map, &network_cpus_map, cpu_possible_mask);
+
+ if (cpumask_empty(&network_cpus_map)) {
+ pr_warn("Ignoring empty tile_net.cpus='%s'.\n",
+ network_cpus_string);
+ return false;
+ }
+
+ cpulist_scnprintf(buf, sizeof(buf), &network_cpus_map);
+ pr_info("Linux network CPUs: %s\n", buf);
+ return true;
+}
+
+module_param_named(cpus, network_cpus_string, charp, 0444);
+MODULE_PARM_DESC(cpus, "cpulist of cores that handle network interrupts");
+
+/* The "tile_net.loopify=LINK" argument causes the named device to
+ * actually use "loop0" for ingress, and "loop1" for egress. This
+ * allows an app to sit between the actual link and linux, passing
+ * (some) packets along to linux, and forwarding (some) packets sent
+ * out by linux.
+ */
+module_param_named(loopify, loopify_link_name, charp, 0444);
+MODULE_PARM_DESC(loopify, "name the device to use loop0/1 for ingress/egress");
+
+/* The "tile_net.custom" argument causes us to ignore the "conventional"
+ * classifier metadata, in particular, the "l2_offset".
+ */
+module_param_named(custom, custom_str, charp, 0444);
+MODULE_PARM_DESC(custom, "indicates a (heavily) customized classifier");
+
+/* Atomically update a statistics field.
+ * Note that on TILE-Gx, this operation is fire-and-forget on the
+ * issuing core (single-cycle dispatch) and takes only a few cycles
+ * longer than a regular store when the request reaches the home cache.
+ * No expensive bus management overhead is required.
+ */
+static void tile_net_stats_add(unsigned long value, unsigned long *field)
+{
+ BUILD_BUG_ON(sizeof(atomic_long_t) != sizeof(unsigned long));
+ atomic_long_add(value, (atomic_long_t *)field);
+}
+
+/* Allocate and push a buffer. */
+static bool tile_net_provide_buffer(bool small)
+{
+ int stack = small ? small_buffer_stack : large_buffer_stack;
+ const unsigned long buffer_alignment = 128;
+ struct sk_buff *skb;
+ int len;
+
+ len = sizeof(struct sk_buff **) + buffer_alignment;
+ len += (small ? BUFFER_SIZE_SMALL : BUFFER_SIZE_LARGE);
+ skb = dev_alloc_skb(len);
+ if (skb == NULL)
+ return false;
+
+ /* Make room for a back-pointer to 'skb' and guarantee alignment. */
+ skb_reserve(skb, sizeof(struct sk_buff **));
+ skb_reserve(skb, -(long)skb->data & (buffer_alignment - 1));
+
+ /* Save a back-pointer to 'skb'. */
+ *(struct sk_buff **)(skb->data - sizeof(struct sk_buff **)) = skb;
+
+ /* Make sure "skb" and the back-pointer have been flushed. */
+ wmb();
+
+ gxio_mpipe_push_buffer(&context, stack,
+ (void *)va_to_tile_io_addr(skb->data));
+
+ return true;
+}
+
+/* Convert a raw mpipe buffer to its matching skb pointer. */
+static struct sk_buff *mpipe_buf_to_skb(void *va)
+{
+ /* Acquire the associated "skb". */
+ struct sk_buff **skb_ptr = va - sizeof(*skb_ptr);
+ struct sk_buff *skb = *skb_ptr;
+
+ /* Paranoia. */
+ if (skb->data != va) {
+ /* Panic here since there's a reasonable chance
+ * that corrupt buffers means generic memory
+ * corruption, with unpredictable system effects.
+ */
+ panic("Corrupt linux buffer! va=%p, skb=%p, skb->data=%p",
+ va, skb, skb->data);
+ }
+
+ return skb;
+}
+
+static void tile_net_pop_all_buffers(int stack)
+{
+ for (;;) {
+ tile_io_addr_t addr =
+ (tile_io_addr_t)gxio_mpipe_pop_buffer(&context, stack);
+ if (addr == 0)
+ break;
+ dev_kfree_skb_irq(mpipe_buf_to_skb(tile_io_addr_to_va(addr)));
+ }
+}
+
+/* Provide linux buffers to mPIPE. */
+static void tile_net_provide_needed_buffers(void)
+{
+ struct tile_net_info *info = &__get_cpu_var(per_cpu_info);
+
+ while (info->num_needed_small_buffers != 0) {
+ if (!tile_net_provide_buffer(true))
+ goto oops;
+ info->num_needed_small_buffers--;
+ }
+
+ while (info->num_needed_large_buffers != 0) {
+ if (!tile_net_provide_buffer(false))
+ goto oops;
+ info->num_needed_large_buffers--;
+ }
+
+ return;
+
+oops:
+ /* Add a description to the page allocation failure dump. */
+ pr_notice("Tile %d still needs some buffers\n", info->my_cpu);
+}
+
+static inline bool filter_packet(struct net_device *dev, void *buf)
+{
+ /* Filter packets received before we're up. */
+ if (dev == NULL || !(dev->flags & IFF_UP))
+ return true;
+
+ /* Filter out packets that aren't for us. */
+ if (!(dev->flags & IFF_PROMISC) &&
+ !is_multicast_ether_addr(buf) &&
+ compare_ether_addr(dev->dev_addr, buf) != 0)
+ return true;
+
+ return false;
+}
+
+static void tile_net_receive_skb(struct net_device *dev, struct sk_buff *skb,
+ gxio_mpipe_idesc_t *idesc, unsigned long len)
+{
+ struct tile_net_info *info = &__get_cpu_var(per_cpu_info);
+ struct tile_net_priv *priv = netdev_priv(dev);
+
+ /* Encode the actual packet length. */
+ skb_put(skb, len);
+
+ skb->protocol = eth_type_trans(skb, dev);
+
+ /* Acknowledge "good" hardware checksums. */
+ if (idesc->cs && idesc->csum_seed_val == 0xFFFF)
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+ netif_receive_skb(skb);
+
+ /* Update stats. */
+ tile_net_stats_add(1, &priv->stats.rx_packets);
+ tile_net_stats_add(len, &priv->stats.rx_bytes);
+
+ /* Need a new buffer. */
+ if (idesc->size == BUFFER_SIZE_SMALL_ENUM)
+ info->num_needed_small_buffers++;
+ else
+ info->num_needed_large_buffers++;
+}
+
+/* Handle a packet. Return true if "processed", false if "filtered". */
+static bool tile_net_handle_packet(gxio_mpipe_idesc_t *idesc)
+{
+ struct tile_net_info *info = &__get_cpu_var(per_cpu_info);
+ struct net_device *dev = tile_net_devs_for_channel[idesc->channel];
+ uint8_t l2_offset;
+ void *va;
+ void *buf;
+ unsigned long len;
+ bool filter;
+
+ /* Drop packets for which no buffer was available.
+ * NOTE: This happens under heavy load.
+ */
+ if (idesc->be) {
+ struct tile_net_priv *priv = netdev_priv(dev);
+ tile_net_stats_add(1, &priv->stats.rx_dropped);
+ gxio_mpipe_iqueue_consume(&info->iqueue, idesc);
+ if (net_ratelimit())
+ pr_info("Dropping packet (insufficient buffers).\n");
+ return false;
+ }
+
+ /* Get the "l2_offset", if allowed. */
+ l2_offset = custom_str ? 0 : gxio_mpipe_idesc_get_l2_offset(idesc);
+
+ /* Get the raw buffer VA (includes "headroom"). */
+ va = tile_io_addr_to_va((unsigned long)(long)idesc->va);
+
+ /* Get the actual packet start/length. */
+ buf = va + l2_offset;
+ len = idesc->l2_size - l2_offset;
+
+ /* Point "va" at the raw buffer. */
+ va -= NET_IP_ALIGN;
+
+ filter = filter_packet(dev, buf);
+ if (filter) {
+ gxio_mpipe_iqueue_drop(&info->iqueue, idesc);
+ } else {
+ struct sk_buff *skb = mpipe_buf_to_skb(va);
+
+ /* Skip headroom, and any custom header. */
+ skb_reserve(skb, NET_IP_ALIGN + l2_offset);
+
+ tile_net_receive_skb(dev, skb, idesc, len);
+ }
+
+ gxio_mpipe_iqueue_consume(&info->iqueue, idesc);
+ return !filter;
+}
+
+/* Handle some packets for the current CPU.
+ *
+ * This function handles up to TILE_NET_BATCH idescs per call.
+ *
+ * ISSUE: Since we do not provide new buffers until this function is
+ * complete, we must initially provide enough buffers for each network
+ * cpu to fill its iqueue and also its batched idescs.
+ *
+ * ISSUE: The "rotting packet" race condition occurs if a packet
+ * arrives after the queue appears to be empty, and before the
+ * hypervisor interrupt is re-enabled.
+ */
+static int tile_net_poll(struct napi_struct *napi, int budget)
+{
+ struct tile_net_info *info = &__get_cpu_var(per_cpu_info);
+ unsigned int work = 0;
+ gxio_mpipe_idesc_t *idesc;
+ int i, n;
+
+ /* Process packets. */
+ while ((n = gxio_mpipe_iqueue_try_peek(&info->iqueue, &idesc)) > 0) {
+ for (i = 0; i < n; i++) {
+ if (i == TILE_NET_BATCH)
+ goto done;
+ if (tile_net_handle_packet(idesc + i)) {
+ if (++work >= budget)
+ goto done;
+ }
+ }
+ }
+
+ /* There are no packets left. */
+ napi_complete(&info->napi);
+
+ /* Re-enable hypervisor interrupts. */
+ gxio_mpipe_enable_notif_ring_interrupt(&context, info->iqueue.ring);
+
+ /* HACK: Avoid the "rotting packet" problem. */
+ if (gxio_mpipe_iqueue_try_peek(&info->iqueue, &idesc) > 0)
+ napi_schedule(&info->napi);
+
+ /* ISSUE: Handle completions? */
+
+done:
+ tile_net_provide_needed_buffers();
+
+ return work;
+}
+
+/* Handle an ingress interrupt on the current cpu. */
+static irqreturn_t tile_net_handle_ingress_irq(int irq, void *unused)
+{
+ struct tile_net_info *info = &__get_cpu_var(per_cpu_info);
+ napi_schedule(&info->napi);
+ return IRQ_HANDLED;
+}
+
+/* Free some completions. This must be called with interrupts blocked. */
+static int tile_net_free_comps(gxio_mpipe_equeue_t *equeue,
+ struct tile_net_comps *comps,
+ int limit, bool force_update)
+{
+ int n = 0;
+ while (comps->comp_last < comps->comp_next) {
+ unsigned int cid = comps->comp_last % TILE_NET_MAX_COMPS;
+ struct tile_net_comp *comp = &comps->comp_queue[cid];
+ if (!gxio_mpipe_equeue_is_complete(equeue, comp->when,
+ force_update || n == 0))
+ break;
+ dev_kfree_skb_irq(comp->skb);
+ comps->comp_last++;
+ if (++n == limit)
+ break;
+ }
+ return n;
+}
+
+/* Add a completion. This must be called with interrupts blocked.
+ * tile_net_equeue_try_reserve() will have ensured a free completion entry.
+ */
+static void add_comp(gxio_mpipe_equeue_t *equeue,
+ struct tile_net_comps *comps,
+ uint64_t when, struct sk_buff *skb)
+{
+ int cid = comps->comp_next % TILE_NET_MAX_COMPS;
+ comps->comp_queue[cid].when = when;
+ comps->comp_queue[cid].skb = skb;
+ comps->comp_next++;
+}
+
+static void tile_net_schedule_tx_wake_timer(struct net_device *dev)
+{
+ struct tile_net_info *info = &__get_cpu_var(per_cpu_info);
+ struct tile_net_priv *priv = netdev_priv(dev);
+
+ hrtimer_start(&info->tx_wake[priv->echannel].timer,
+ ktime_set(0, TX_TIMER_DELAY_USEC * 1000UL),
+ HRTIMER_MODE_REL_PINNED);
+}
+
+static enum hrtimer_restart tile_net_handle_tx_wake_timer(struct hrtimer *t)
+{
+ struct tile_net_tx_wake *tx_wake =
+ container_of(t, struct tile_net_tx_wake, timer);
+ netif_wake_subqueue(tx_wake->dev, smp_processor_id());
+ return HRTIMER_NORESTART;
+}
+
+/* Make sure the egress timer is scheduled. */
+static void tile_net_schedule_egress_timer(void)
+{
+ struct tile_net_info *info = &__get_cpu_var(per_cpu_info);
+
+ if (!info->egress_timer_scheduled) {
+ hrtimer_start(&info->egress_timer,
+ ktime_set(0, EGRESS_TIMER_DELAY_USEC * 1000UL),
+ HRTIMER_MODE_REL_PINNED);
+ info->egress_timer_scheduled = true;
+ }
+}
+
+/* The "function" for "info->egress_timer".
+ *
+ * This timer will reschedule itself as long as there are any pending
+ * completions expected for this tile.
+ */
+static enum hrtimer_restart tile_net_handle_egress_timer(struct hrtimer *t)
+{
+ struct tile_net_info *info = &__get_cpu_var(per_cpu_info);
+ unsigned long irqflags;
+ bool pending = false;
+ int i;
+
+ local_irq_save(irqflags);
+
+ /* The timer is no longer scheduled. */
+ info->egress_timer_scheduled = false;
+
+ /* Free all possible comps for this tile. */
+ for (i = 0; i < TILE_NET_CHANNELS; i++) {
+ struct tile_net_egress *egress = &egress_for_echannel[i];
+ struct tile_net_comps *comps = info->comps_for_echannel[i];
+ if (comps->comp_last >= comps->comp_next)
+ continue;
+ tile_net_free_comps(egress->equeue, comps, -1, true);
+ pending = pending || (comps->comp_last < comps->comp_next);
+ }
+
+ /* Reschedule timer if needed. */
+ if (pending)
+ tile_net_schedule_egress_timer();
+
+ local_irq_restore(irqflags);
+
+ return HRTIMER_NORESTART;
+}
+
+/* Helper function for "tile_net_update()".
+ * "dev" (i.e. arg) is the device being brought up or down,
+ * or NULL if all devices are now down.
+ */
+static void tile_net_update_cpu(void *arg)
+{
+ struct tile_net_info *info = &__get_cpu_var(per_cpu_info);
+ struct net_device *dev = arg;
+
+ if (!info->has_iqueue)
+ return;
+
+ if (dev != NULL) {
+ if (!info->napi_added) {
+ netif_napi_add(dev, &info->napi,
+ tile_net_poll, TILE_NET_WEIGHT);
+ info->napi_added = true;
+ }
+ if (!info->napi_enabled) {
+ napi_enable(&info->napi);
+ info->napi_enabled = true;
+ }
+ enable_percpu_irq(ingress_irq, 0);
+ } else {
+ disable_percpu_irq(ingress_irq);
+ if (info->napi_enabled) {
+ napi_disable(&info->napi);
+ info->napi_enabled = false;
+ }
+ /* FIXME: Drain the iqueue. */
+ }
+}
+
+/* Helper function for tile_net_open() and tile_net_stop().
+ * Always called under tile_net_devs_for_channel_mutex.
+ */
+static int tile_net_update(struct net_device *dev)
+{
+ static gxio_mpipe_rules_t rules; /* too big to fit on the stack */
+ bool saw_channel = false;
+ int channel;
+ int rc;
+ int cpu;
+
+ gxio_mpipe_rules_init(&rules, &context);
+
+ for (channel = 0; channel < TILE_NET_CHANNELS; channel++) {
+ if (tile_net_devs_for_channel[channel] == NULL)
+ continue;
+ if (!saw_channel) {
+ saw_channel = true;
+ gxio_mpipe_rules_begin(&rules, first_bucket,
+ num_buckets, NULL);
+ gxio_mpipe_rules_set_headroom(&rules, NET_IP_ALIGN);
+ }
+ gxio_mpipe_rules_add_channel(&rules, channel);
+ }
+
+ /* NOTE: This can fail if there is no classifier.
+ * ISSUE: Can anything else cause it to fail?
+ */
+ rc = gxio_mpipe_rules_commit(&rules);
+ if (rc != 0) {
+ netdev_warn(dev, "gxio_mpipe_rules_commit failed: %d\n", rc);
+ return -EIO;
+ }
+
+ /* Update all cpus, sequentially (to protect "netif_napi_add()"). */
+ for_each_online_cpu(cpu)
+ smp_call_function_single(cpu, tile_net_update_cpu,
+ (saw_channel ? dev : NULL), 1);
+
+ /* HACK: Allow packets to flow in the simulator. */
+ if (saw_channel)
+ sim_enable_mpipe_links(0, -1);
+
+ return 0;
+}
+
+/* Allocate and initialize mpipe buffer stacks, and register them in
+ * the mPIPE TLBs, for both small and large packet sizes.
+ * This routine supports tile_net_init_mpipe(), below.
+ */
+static int init_buffer_stacks(struct net_device *dev, int num_buffers)
+{
+ pte_t hash_pte = pte_set_home((pte_t) { 0 }, PAGE_HOME_HASH);
+ int rc;
+
+ /* Compute stack bytes; we round up to 64KB and then use
+ * alloc_pages() so we get the required 64KB alignment as well.
+ */
+ buffer_stack_size =
+ ALIGN(gxio_mpipe_calc_buffer_stack_bytes(num_buffers),
+ 64 * 1024);
+
+ /* Allocate two buffer stack indices. */
+ rc = gxio_mpipe_alloc_buffer_stacks(&context, 2, 0, 0);
+ if (rc < 0) {
+ netdev_err(dev, "gxio_mpipe_alloc_buffer_stacks failed: %d\n",
+ rc);
+ return rc;
+ }
+ small_buffer_stack = rc;
+ large_buffer_stack = rc + 1;
+
+ /* Allocate the small memory stack. */
+ small_buffer_stack_va =
+ alloc_pages_exact(buffer_stack_size, GFP_KERNEL);
+ if (small_buffer_stack_va == NULL) {
+ netdev_err(dev,
+ "Could not alloc %zd bytes for buffer stacks\n",
+ buffer_stack_size);
+ return -ENOMEM;
+ }
+ rc = gxio_mpipe_init_buffer_stack(&context, small_buffer_stack,
+ BUFFER_SIZE_SMALL_ENUM,
+ small_buffer_stack_va,
+ buffer_stack_size, 0);
+ if (rc != 0) {
+ netdev_err(dev, "gxio_mpipe_init_buffer_stack: %d\n", rc);
+ return rc;
+ }
+ rc = gxio_mpipe_register_client_memory(&context, small_buffer_stack,
+ hash_pte, 0);
+ if (rc != 0) {
+ netdev_err(dev,
+ "gxio_mpipe_register_buffer_memory failed: %d\n",
+ rc);
+ return rc;
+ }
+
+ /* Allocate the large buffer stack. */
+ large_buffer_stack_va =
+ alloc_pages_exact(buffer_stack_size, GFP_KERNEL);
+ if (large_buffer_stack_va == NULL) {
+ netdev_err(dev,
+ "Could not alloc %zd bytes for buffer stacks\n",
+ buffer_stack_size);
+ return -ENOMEM;
+ }
+ rc = gxio_mpipe_init_buffer_stack(&context, large_buffer_stack,
+ BUFFER_SIZE_LARGE_ENUM,
+ large_buffer_stack_va,
+ buffer_stack_size, 0);
+ if (rc != 0) {
+ netdev_err(dev, "gxio_mpipe_init_buffer_stack failed: %d\n",
+ rc);
+ return rc;
+ }
+ rc = gxio_mpipe_register_client_memory(&context, large_buffer_stack,
+ hash_pte, 0);
+ if (rc != 0) {
+ netdev_err(dev,
+ "gxio_mpipe_register_buffer_memory failed: %d\n",
+ rc);
+ return rc;
+ }
+
+ return 0;
+}
+
+/* Allocate per-cpu resources (memory for completions and idescs).
+ * This routine supports tile_net_init_mpipe(), below.
+ */
+static int alloc_percpu_mpipe_resources(struct net_device *dev,
+ int cpu, int ring)
+{
+ struct tile_net_info *info = &per_cpu(per_cpu_info, cpu);
+ int order, i, rc;
+ struct page *page;
+ void *addr;
+
+ /* Allocate the "comps". */
+ order = get_order(COMPS_SIZE);
+ page = homecache_alloc_pages(GFP_KERNEL, order, cpu);
+ if (page == NULL) {
+ netdev_err(dev, "Failed to alloc %zd bytes comps memory\n",
+ COMPS_SIZE);
+ return -ENOMEM;
+ }
+ addr = pfn_to_kaddr(page_to_pfn(page));
+ memset(addr, 0, COMPS_SIZE);
+ for (i = 0; i < TILE_NET_CHANNELS; i++)
+ info->comps_for_echannel[i] =
+ addr + i * sizeof(struct tile_net_comps);
+
+ /* If this is a network cpu, create an iqueue. */
+ if (cpu_isset(cpu, network_cpus_map)) {
+ order = get_order(NOTIF_RING_SIZE);
+ page = homecache_alloc_pages(GFP_KERNEL, order, cpu);
+ if (page == NULL) {
+ netdev_err(dev,
+ "Failed to alloc %zd bytes iqueue memory\n",
+ NOTIF_RING_SIZE);
+ return -ENOMEM;
+ }
+ addr = pfn_to_kaddr(page_to_pfn(page));
+ rc = gxio_mpipe_iqueue_init(&info->iqueue, &context, ring++,
+ addr, NOTIF_RING_SIZE, 0);
+ if (rc < 0) {
+ netdev_err(dev,
+ "gxio_mpipe_iqueue_init failed: %d\n", rc);
+ return rc;
+ }
+ info->has_iqueue = true;
+ }
+
+ return ring;
+}
+
+/* Initialize NotifGroup and buckets.
+ * This routine supports tile_net_init_mpipe(), below.
+ */
+static int init_notif_group_and_buckets(struct net_device *dev,
+ int ring, int network_cpus_count)
+{
+ int group, rc;
+
+ /* Allocate one NotifGroup. */
+ rc = gxio_mpipe_alloc_notif_groups(&context, 1, 0, 0);
+ if (rc < 0) {
+ netdev_err(dev, "gxio_mpipe_alloc_notif_groups failed: %d\n",
+ rc);
+ return rc;
+ }
+ group = rc;
+
+ /* Initialize global num_buckets value. */
+ if (network_cpus_count > 4)
+ num_buckets = 256;
+ else if (network_cpus_count > 1)
+ num_buckets = 16;
+
+ /* Allocate some buckets, and set global first_bucket value. */
+ rc = gxio_mpipe_alloc_buckets(&context, num_buckets, 0, 0);
+ if (rc < 0) {
+ netdev_err(dev, "gxio_mpipe_alloc_buckets failed: %d\n", rc);
+ return rc;
+ }
+ first_bucket = rc;
+
+ /* Init group and buckets. */
+ rc = gxio_mpipe_init_notif_group_and_buckets(
+ &context, group, ring, network_cpus_count,
+ first_bucket, num_buckets,
+ GXIO_MPIPE_BUCKET_STICKY_FLOW_LOCALITY);
+ if (rc != 0) {
+ netdev_err(
+ dev,
+ "gxio_mpipe_init_notif_group_and_buckets failed: %d\n",
+ rc);
+ return rc;
+ }
+
+ return 0;
+}
+
+/* Create an irq and register it, then activate the irq and request
+ * interrupts on all cores. Note that "ingress_irq" being initialized
+ * is how we know not to call tile_net_init_mpipe() again.
+ * This routine supports tile_net_init_mpipe(), below.
+ */
+static int tile_net_setup_interrupts(struct net_device *dev)
+{
+ int cpu, rc;
+
+ rc = create_irq();
+ if (rc < 0) {
+ netdev_err(dev, "create_irq failed: %d\n", rc);
+ return rc;
+ }
+ ingress_irq = rc;
+ tile_irq_activate(ingress_irq, TILE_IRQ_PERCPU);
+ rc = request_irq(ingress_irq, tile_net_handle_ingress_irq,
+ 0, NULL, NULL);
+ if (rc != 0) {
+ netdev_err(dev, "request_irq failed: %d\n", rc);
+ destroy_irq(ingress_irq);
+ ingress_irq = -1;
+ return rc;
+ }
+
+ for_each_online_cpu(cpu) {
+ struct tile_net_info *info = &per_cpu(per_cpu_info, cpu);
+ if (info->has_iqueue) {
+ gxio_mpipe_request_notif_ring_interrupt(
+ &context, cpu_x(cpu), cpu_y(cpu),
+ 1, ingress_irq, info->iqueue.ring);
+ }
+ }
+
+ return 0;
+}
+
+/* Undo any state set up partially by a failed call to tile_net_init_mpipe. */
+static void tile_net_init_mpipe_fail(void)
+{
+ int cpu;
+
+ /* Do cleanups that require the mpipe context first. */
+ if (small_buffer_stack >= 0)
+ tile_net_pop_all_buffers(small_buffer_stack);
+ if (large_buffer_stack >= 0)
+ tile_net_pop_all_buffers(large_buffer_stack);
+
+ /* Destroy mpipe context so the hardware no longer owns any memory. */
+ gxio_mpipe_destroy(&context);
+
+ for_each_online_cpu(cpu) {
+ struct tile_net_info *info = &per_cpu(per_cpu_info, cpu);
+ free_pages((unsigned long)(info->comps_for_echannel[0]),
+ get_order(COMPS_SIZE));
+ info->comps_for_echannel[0] = NULL;
+ free_pages((unsigned long)(info->iqueue.idescs),
+ get_order(NOTIF_RING_SIZE));
+ info->iqueue.idescs = NULL;
+ }
+
+ if (small_buffer_stack_va)
+ free_pages_exact(small_buffer_stack_va, buffer_stack_size);
+ if (large_buffer_stack_va)
+ free_pages_exact(large_buffer_stack_va, buffer_stack_size);
+
+ small_buffer_stack_va = NULL;
+ large_buffer_stack_va = NULL;
+ large_buffer_stack = -1;
+ small_buffer_stack = -1;
+ first_bucket = -1;
+}
+
+/* The first time any tilegx network device is opened, we initialize
+ * the global mpipe state. If this step fails, we fail to open the
+ * device, but if it succeeds, we never need to do it again, and since
+ * tile_net can't be unloaded, we never undo it.
+ *
+ * Note that some resources in this path (buffer stack indices,
+ * bindings from init_buffer_stack, etc.) are hypervisor resources
+ * that are freed implicitly by gxio_mpipe_destroy().
+ */
+static int tile_net_init_mpipe(struct net_device *dev)
+{
+ int i, num_buffers, rc;
+ int cpu;
+ int first_ring, ring;
+ int network_cpus_count = cpus_weight(network_cpus_map);
+
+ if (!hash_default) {
+ netdev_err(dev, "Networking requires hash_default!\n");
+ return -EIO;
+ }
+
+ rc = gxio_mpipe_init(&context, 0);
+ if (rc != 0) {
+ netdev_err(dev, "gxio_mpipe_init failed: %d\n", rc);
+ return -EIO;
+ }
+
+ /* Set up the buffer stacks. */
+ num_buffers =
+ network_cpus_count * (IQUEUE_ENTRIES + TILE_NET_BATCH);
+ rc = init_buffer_stacks(dev, num_buffers);
+ if (rc != 0)
+ goto fail;
+
+ /* Provide initial buffers. */
+ rc = -ENOMEM;
+ for (i = 0; i < num_buffers; i++) {
+ if (!tile_net_provide_buffer(true)) {
+ netdev_err(dev, "Cannot allocate initial sk_bufs!\n");
+ goto fail;
+ }
+ }
+ for (i = 0; i < num_buffers; i++) {
+ if (!tile_net_provide_buffer(false)) {
+ netdev_err(dev, "Cannot allocate initial sk_bufs!\n");
+ goto fail;
+ }
+ }
+
+ /* Allocate one NotifRing for each network cpu. */
+ rc = gxio_mpipe_alloc_notif_rings(&context, network_cpus_count, 0, 0);
+ if (rc < 0) {
+ netdev_err(dev, "gxio_mpipe_alloc_notif_rings failed %d\n",
+ rc);
+ goto fail;
+ }
+
+ /* Init NotifRings per-cpu. */
+ first_ring = rc;
+ ring = first_ring;
+ for_each_online_cpu(cpu) {
+ rc = alloc_percpu_mpipe_resources(dev, cpu, ring);
+ if (rc < 0)
+ goto fail;
+ ring = rc;
+ }
+
+ /* Initialize NotifGroup and buckets. */
+ rc = init_notif_group_and_buckets(dev, first_ring, network_cpus_count);
+ if (rc != 0)
+ goto fail;
+
+ /* Create and enable interrupts. */
+ rc = tile_net_setup_interrupts(dev);
+ if (rc != 0)
+ goto fail;
+
+ return 0;
+
+fail:
+ tile_net_init_mpipe_fail();
+ return rc;
+}
+
+/* Create persistent egress info for a given egress channel.
+ * Note that this may be shared between, say, "gbe0" and "xgbe0".
+ * ISSUE: Defer header allocation until TSO is actually needed?
+ */
+static int tile_net_init_egress(struct net_device *dev, int echannel)
+{
+ struct page *headers_page, *edescs_page, *equeue_page;
+ gxio_mpipe_edesc_t *edescs;
+ gxio_mpipe_equeue_t *equeue;
+ unsigned char *headers;
+ int headers_order, edescs_order, equeue_order;
+ size_t edescs_size;
+ int edma;
+ int rc = -ENOMEM;
+
+ /* Only initialize once. */
+ if (egress_for_echannel[echannel].equeue != NULL)
+ return 0;
+
+ /* Allocate memory for the "headers". */
+ headers_order = get_order(EQUEUE_ENTRIES * HEADER_BYTES);
+ headers_page = alloc_pages(GFP_KERNEL, headers_order);
+ if (headers_page == NULL) {
+ netdev_warn(dev,
+ "Could not alloc %zd bytes for TSO headers.\n",
+ PAGE_SIZE << headers_order);
+ goto fail;
+ }
+ headers = pfn_to_kaddr(page_to_pfn(headers_page));
+
+ /* Allocate memory for the "edescs". */
+ edescs_size = EQUEUE_ENTRIES * sizeof(*edescs);
+ edescs_order = get_order(edescs_size);
+ edescs_page = alloc_pages(GFP_KERNEL, edescs_order);
+ if (edescs_page == NULL) {
+ netdev_warn(dev,
+ "Could not alloc %zd bytes for eDMA ring.\n",
+ edescs_size);
+ goto fail_headers;
+ }
+ edescs = pfn_to_kaddr(page_to_pfn(edescs_page));
+
+ /* Allocate memory for the "equeue". */
+ equeue_order = get_order(sizeof(*equeue));
+ equeue_page = alloc_pages(GFP_KERNEL, equeue_order);
+ if (equeue_page == NULL) {
+ netdev_warn(dev,
+ "Could not alloc %zd bytes for equeue info.\n",
+ PAGE_SIZE << equeue_order);
+ goto fail_edescs;
+ }
+ equeue = pfn_to_kaddr(page_to_pfn(equeue_page));
+
+ /* Allocate an edma ring. Note that in practice this can't
+ * fail, which is good, because we will leak an edma ring if so.
+ */
+ rc = gxio_mpipe_alloc_edma_rings(&context, 1, 0, 0);
+ if (rc < 0) {
+ netdev_warn(dev, "gxio_mpipe_alloc_edma_rings failed: %d\n",
+ rc);
+ goto fail_equeue;
+ }
+ edma = rc;
+
+ /* Initialize the equeue. */
+ rc = gxio_mpipe_equeue_init(equeue, &context, edma, echannel,
+ edescs, edescs_size, 0);
+ if (rc != 0) {
+ netdev_err(dev, "gxio_mpipe_equeue_init failed: %d\n", rc);
+ goto fail_equeue;
+ }
+
+ /* Done. */
+ egress_for_echannel[echannel].equeue = equeue;
+ egress_for_echannel[echannel].headers = headers;
+ return 0;
+
+fail_equeue:
+ __free_pages(equeue_page, equeue_order);
+
+fail_edescs:
+ __free_pages(edescs_page, edescs_order);
+
+fail_headers:
+ __free_pages(headers_page, headers_order);
+
+fail:
+ return rc;
+}
+
+/* Return channel number for a newly-opened link. */
+static int tile_net_link_open(struct net_device *dev, gxio_mpipe_link_t *link,
+ const char *link_name)
+{
+ int rc = gxio_mpipe_link_open(link, &context, link_name, 0);
+ if (rc < 0) {
+ netdev_err(dev, "Failed to open '%s'\n", link_name);
+ return rc;
+ }
+ rc = gxio_mpipe_link_channel(link);
+ if (rc < 0 || rc >= TILE_NET_CHANNELS) {
+ netdev_err(dev, "gxio_mpipe_link_channel bad value: %d\n", rc);
+ gxio_mpipe_link_close(link);
+ return -EINVAL;
+ }
+ return rc;
+}
+
+/* Help the kernel activate the given network interface. */
+static int tile_net_open(struct net_device *dev)
+{
+ struct tile_net_priv *priv = netdev_priv(dev);
+ int cpu, rc;
+
+ mutex_lock(&tile_net_devs_for_channel_mutex);
+
+ /* Do one-time initialization the first time any device is opened. */
+ if (ingress_irq < 0) {
+ rc = tile_net_init_mpipe(dev);
+ if (rc != 0)
+ goto fail;
+ }
+
+ /* Determine if this is the "loopify" device. */
+ if (unlikely((loopify_link_name != NULL) &&
+ !strcmp(dev->name, loopify_link_name))) {
+ rc = tile_net_link_open(dev, &priv->link, "loop0");
+ if (rc < 0)
+ goto fail;
+ priv->channel = rc;
+ rc = tile_net_link_open(dev, &priv->loopify_link, "loop1");
+ if (rc < 0)
+ goto fail;
+ priv->loopify_channel = rc;
+ priv->echannel = rc;
+ } else {
+ rc = tile_net_link_open(dev, &priv->link, dev->name);
+ if (rc < 0)
+ goto fail;
+ priv->channel = rc;
+ priv->echannel = rc;
+ }
+
+ /* Initialize egress info (if needed). Once ever, per echannel. */
+ rc = tile_net_init_egress(dev, priv->echannel);
+ if (rc != 0)
+ goto fail;
+
+ tile_net_devs_for_channel[priv->channel] = dev;
+
+ rc = tile_net_update(dev);
+ if (rc != 0)
+ goto fail;
+
+ mutex_unlock(&tile_net_devs_for_channel_mutex);
+
+ /* Initialize the transmit wake timer for this device for each cpu. */
+ for_each_online_cpu(cpu) {
+ struct tile_net_info *info = &per_cpu(per_cpu_info, cpu);
+ struct tile_net_tx_wake *tx_wake =
+ &info->tx_wake[priv->echannel];
+
+ hrtimer_init(&tx_wake->timer, CLOCK_MONOTONIC,
+ HRTIMER_MODE_REL);
+ tx_wake->timer.function = tile_net_handle_tx_wake_timer;
+ tx_wake->dev = dev;
+ }
+
+ for_each_online_cpu(cpu)
+ netif_start_subqueue(dev, cpu);
+ netif_carrier_on(dev);
+ return 0;
+
+fail:
+ if (priv->loopify_channel >= 0) {
+ if (gxio_mpipe_link_close(&priv->loopify_link) != 0)
+ netdev_warn(dev, "Failed to close loopify link!\n");
+ priv->loopify_channel = -1;
+ }
+ if (priv->channel >= 0) {
+ if (gxio_mpipe_link_close(&priv->link) != 0)
+ netdev_warn(dev, "Failed to close link!\n");
+ priv->channel = -1;
+ }
+ priv->echannel = -1;
+ tile_net_devs_for_channel[priv->channel] = NULL;
+ mutex_unlock(&tile_net_devs_for_channel_mutex);
+
+ /* Don't return raw gxio error codes to generic Linux. */
+ return (rc > -512) ? rc : -EIO;
+}
+
+/* Help the kernel deactivate the given network interface. */
+static int tile_net_stop(struct net_device *dev)
+{
+ struct tile_net_priv *priv = netdev_priv(dev);
+ int cpu;
+
+ for_each_online_cpu(cpu) {
+ struct tile_net_info *info = &per_cpu(per_cpu_info, cpu);
+ struct tile_net_tx_wake *tx_wake =
+ &info->tx_wake[priv->echannel];
+
+ hrtimer_cancel(&tx_wake->timer);
+ netif_stop_subqueue(dev, cpu);
+ }
+
+ mutex_lock(&tile_net_devs_for_channel_mutex);
+ tile_net_devs_for_channel[priv->channel] = NULL;
+ (void)tile_net_update(dev);
+ if (priv->loopify_channel >= 0) {
+ if (gxio_mpipe_link_close(&priv->loopify_link) != 0)
+ netdev_warn(dev, "Failed to close loopify link!\n");
+ priv->loopify_channel = -1;
+ }
+ if (priv->channel >= 0) {
+ if (gxio_mpipe_link_close(&priv->link) != 0)
+ netdev_warn(dev, "Failed to close link!\n");
+ priv->channel = -1;
+ }
+ priv->echannel = -1;
+ mutex_unlock(&tile_net_devs_for_channel_mutex);
+
+ return 0;
+}
+
+/* Determine the VA for a fragment. */
+static inline void *tile_net_frag_buf(skb_frag_t *f)
+{
+ unsigned long pfn = page_to_pfn(skb_frag_page(f));
+ return pfn_to_kaddr(pfn) + f->page_offset;
+}
+
+/* Acquire a completion entry and an egress slot, or if we can't,
+ * stop the queue and schedule the tx_wake timer.
+ */
+static s64 tile_net_equeue_try_reserve(struct net_device *dev,
+ struct tile_net_comps *comps,
+ gxio_mpipe_equeue_t *equeue,
+ int num_edescs)
+{
+ /* Try to acquire a completion entry. */
+ if (comps->comp_next - comps->comp_last < TILE_NET_MAX_COMPS - 1 ||
+ tile_net_free_comps(equeue, comps, 32, false) != 0) {
+
+ /* Try to acquire an egress slot. */
+ s64 slot = gxio_mpipe_equeue_try_reserve(equeue, num_edescs);
+ if (slot >= 0)
+ return slot;
+
+ /* Freeing some completions gives the equeue time to drain. */
+ tile_net_free_comps(equeue, comps, TILE_NET_MAX_COMPS, false);
+
+ slot = gxio_mpipe_equeue_try_reserve(equeue, num_edescs);
+ if (slot >= 0)
+ return slot;
+ }
+
+ /* Still nothing; give up and stop the queue for a short while. */
+ netif_stop_subqueue(dev, smp_processor_id());
+ tile_net_schedule_tx_wake_timer(dev);
+ return -1;
+}
+
+/* Determine how many edesc's are needed for TSO.
+ *
+ * Sometimes, if "sendfile()" requires copying, we will be called with
+ * "data" containing the header and payload, with "frags" being empty.
+ * Sometimes, for example when using NFS over TCP, a single segment can
+ * span 3 fragments. This requires special care.
+ */
+static int tso_count_edescs(struct sk_buff *skb)
+{
+ struct skb_shared_info *sh = skb_shinfo(skb);
+ unsigned int data_len = skb->data_len;
+ unsigned int p_len = sh->gso_size;
+ long f_id = -1; /* id of the current fragment */
+ long f_size = -1; /* size of the current fragment */
+ long f_used = -1; /* bytes used from the current fragment */
+ long n; /* size of the current piece of payload */
+ int num_edescs = 0;
+ int segment;
+
+ for (segment = 0; segment < sh->gso_segs; segment++) {
+
+ unsigned int p_used = 0;
+
+ /* One edesc for header and for each piece of the payload. */
+ for (num_edescs++; p_used < p_len; num_edescs++) {
+
+ /* Advance as needed. */
+ while (f_used >= f_size) {
+ f_id++;
+ f_size = sh->frags[f_id].size;
+ f_used = 0;
+ }
+
+ /* Use bytes from the current fragment. */
+ n = p_len - p_used;
+ if (n > f_size - f_used)
+ n = f_size - f_used;
+ f_used += n;
+ p_used += n;
+ }
+
+ /* The last segment may be less than gso_size. */
+ data_len -= p_len;
+ if (data_len < p_len)
+ p_len = data_len;
+ }
+
+ return num_edescs;
+}
+
+/* Prepare modified copies of the skbuff headers.
+ * FIXME: add support for IPv6.
+ */
+static void tso_headers_prepare(struct sk_buff *skb, unsigned char *headers,
+ s64 slot)
+{
+ struct skb_shared_info *sh = skb_shinfo(skb);
+ struct iphdr *ih;
+ struct tcphdr *th;
+ unsigned int data_len = skb->data_len;
+ unsigned char *data = skb->data;
+ unsigned int ih_off, th_off, sh_len, p_len;
+ unsigned int isum_seed, tsum_seed, id, seq;
+ long f_id = -1; /* id of the current fragment */
+ long f_size = -1; /* size of the current fragment */
+ long f_used = -1; /* bytes used from the current fragment */
+ long n; /* size of the current piece of payload */
+ int segment;
+
+ /* Locate original headers and compute various lengths. */
+ ih = ip_hdr(skb);
+ th = tcp_hdr(skb);
+ ih_off = skb_network_offset(skb);
+ th_off = skb_transport_offset(skb);
+ sh_len = th_off + tcp_hdrlen(skb);
+ p_len = sh->gso_size;
+
+ /* Set up seed values for IP and TCP csum and initialize id and seq. */
+ isum_seed = ((0xFFFF - ih->check) +
+ (0xFFFF - ih->tot_len) +
+ (0xFFFF - ih->id));
+ tsum_seed = th->check + (0xFFFF ^ htons(skb->len));
+ id = ntohs(ih->id);
+ seq = ntohl(th->seq);
+
+ /* Prepare all the headers. */
+ for (segment = 0; segment < sh->gso_segs; segment++) {
+ unsigned char *buf;
+ unsigned int p_used = 0;
+
+ /* Copy to the header memory for this segment. */
+ buf = headers + (slot % EQUEUE_ENTRIES) * HEADER_BYTES +
+ NET_IP_ALIGN;
+ memcpy(buf, data, sh_len);
+
+ /* Update copied ip header. */
+ ih = (struct iphdr *)(buf + ih_off);
+ ih->tot_len = htons(sh_len + p_len - ih_off);
+ ih->id = htons(id);
+ ih->check = csum_long(isum_seed + ih->tot_len +
+ ih->id) ^ 0xffff;
+
+ /* Update copied tcp header. */
+ th = (struct tcphdr *)(buf + th_off);
+ th->seq = htonl(seq);
+ th->check = csum_long(tsum_seed + htons(sh_len + p_len));
+ if (segment != sh->gso_segs - 1) {
+ th->fin = 0;
+ th->psh = 0;
+ }
+
+ /* Skip past the header. */
+ slot++;
+
+ /* Skip past the payload. */
+ while (p_used < p_len) {
+
+ /* Advance as needed. */
+ while (f_used >= f_size) {
+ f_id++;
+ f_size = sh->frags[f_id].size;
+ f_used = 0;
+ }
+
+ /* Use bytes from the current fragment. */
+ n = p_len - p_used;
+ if (n > f_size - f_used)
+ n = f_size - f_used;
+ f_used += n;
+ p_used += n;
+
+ slot++;
+ }
+
+ id++;
+ seq += p_len;
+
+ /* The last segment may be less than gso_size. */
+ data_len -= p_len;
+ if (data_len < p_len)
+ p_len = data_len;
+ }
+
+ /* Flush the headers so they are ready for hardware DMA. */
+ wmb();
+}
+
+/* Pass all the data to mpipe for egress. */
+static void tso_egress(struct net_device *dev, gxio_mpipe_equeue_t *equeue,
+ struct sk_buff *skb, unsigned char *headers, s64 slot)
+{
+ struct tile_net_priv *priv = netdev_priv(dev);
+ struct skb_shared_info *sh = skb_shinfo(skb);
+ unsigned int data_len = skb->data_len;
+ unsigned int p_len = sh->gso_size;
+ gxio_mpipe_edesc_t edesc_head = { { 0 } };
+ gxio_mpipe_edesc_t edesc_body = { { 0 } };
+ long f_id = -1; /* id of the current fragment */
+ long f_size = -1; /* size of the current fragment */
+ long f_used = -1; /* bytes used from the current fragment */
+ long n; /* size of the current piece of payload */
+ unsigned long tx_packets = 0, tx_bytes = 0;
+ unsigned int csum_start, sh_len;
+ int segment;
+
+ /* Prepare to egress the headers: set up header edesc. */
+ csum_start = skb_checksum_start_offset(skb);
+ sh_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
+ edesc_head.csum = 1;
+ edesc_head.csum_start = csum_start;
+ edesc_head.csum_dest = csum_start + skb->csum_offset;
+ edesc_head.xfer_size = sh_len;
+
+ /* This is only used to specify the TLB. */
+ edesc_head.stack_idx = large_buffer_stack;
+ edesc_body.stack_idx = large_buffer_stack;
+
+ /* Egress all the edescs. */
+ for (segment = 0; segment < sh->gso_segs; segment++) {
+ void *va;
+ unsigned char *buf;
+ unsigned int p_used = 0;
+
+ /* Egress the header. */
+ buf = headers + (slot % EQUEUE_ENTRIES) * HEADER_BYTES +
+ NET_IP_ALIGN;
+ edesc_head.va = va_to_tile_io_addr(buf);
+ gxio_mpipe_equeue_put_at(equeue, edesc_head, slot);
+ slot++;
+
+ /* Egress the payload. */
+ while (p_used < p_len) {
+
+ /* Advance as needed. */
+ while (f_used >= f_size) {
+ f_id++;
+ f_size = sh->frags[f_id].size;
+ f_used = 0;
+ }
+
+ va = tile_net_frag_buf(&sh->frags[f_id]) + f_used;
+
+ /* Use bytes from the current fragment. */
+ n = p_len - p_used;
+ if (n > f_size - f_used)
+ n = f_size - f_used;
+ f_used += n;
+ p_used += n;
+
+ /* Egress a piece of the payload. */
+ edesc_body.va = va_to_tile_io_addr(va);
+ edesc_body.xfer_size = n;
+ edesc_body.bound = !(p_used < p_len);
+ gxio_mpipe_equeue_put_at(equeue, edesc_body, slot);
+ slot++;
+ }
+
+ tx_packets++;
+ tx_bytes += sh_len + p_len;
+
+ /* The last segment may be less than gso_size. */
+ data_len -= p_len;
+ if (data_len < p_len)
+ p_len = data_len;
+ }
+
+ /* Update stats. */
+ tile_net_stats_add(tx_packets, &priv->stats.tx_packets);
+ tile_net_stats_add(tx_bytes, &priv->stats.tx_bytes);
+}
+
+/* Do "TSO" handling for egress.
+ *
+ * Normally drivers set NETIF_F_TSO only to support hardware TSO;
+ * otherwise the stack uses scatter-gather to implement GSO in software.
+ * On our testing, enabling GSO support (via NETIF_F_SG) drops network
+ * performance down to around 7.5 Gbps on the 10G interfaces, although
+ * also dropping cpu utilization way down, to under 8%. But
+ * implementing "TSO" in the driver brings performance back up to line
+ * rate, while dropping cpu usage even further, to less than 4%. In
+ * practice, profiling of GSO shows that skb_segment() is what causes
+ * the performance overheads; we benefit in the driver from using
+ * preallocated memory to duplicate the TCP/IP headers.
+ */
+static int tile_net_tx_tso(struct sk_buff *skb, struct net_device *dev)
+{
+ struct tile_net_info *info = &__get_cpu_var(per_cpu_info);
+ struct tile_net_priv *priv = netdev_priv(dev);
+ int channel = priv->echannel;
+ struct tile_net_egress *egress = &egress_for_echannel[channel];
+ struct tile_net_comps *comps = info->comps_for_echannel[channel];
+ gxio_mpipe_equeue_t *equeue = egress->equeue;
+ unsigned long irqflags;
+ int num_edescs;
+ s64 slot;
+
+ /* Determine how many mpipe edesc's are needed. */
+ num_edescs = tso_count_edescs(skb);
+
+ local_irq_save(irqflags);
+
+ /* Try to acquire a completion entry and an egress slot. */
+ slot = tile_net_equeue_try_reserve(dev, comps, equeue, num_edescs);
+ if (slot < 0) {
+ local_irq_restore(irqflags);
+ return NETDEV_TX_BUSY;
+ }
+
+ /* Set up copies of header data properly. */
+ tso_headers_prepare(skb, egress->headers, slot);
+
+ /* Actually pass the data to the network hardware. */
+ tso_egress(dev, equeue, skb, egress->headers, slot);
+
+ /* Add a completion record. */
+ add_comp(equeue, comps, slot + num_edescs - 1, skb);
+
+ local_irq_restore(irqflags);
+
+ /* Make sure the egress timer is scheduled. */
+ tile_net_schedule_egress_timer();
+
+ return NETDEV_TX_OK;
+}
+
+/* Analyze the body and frags for a transmit request. */
+static unsigned int tile_net_tx_frags(struct frag *frags,
+ struct sk_buff *skb,
+ void *b_data, unsigned int b_len)
+{
+ unsigned int i, n = 0;
+
+ struct skb_shared_info *sh = skb_shinfo(skb);
+
+ if (b_len != 0) {
+ frags[n].buf = b_data;
+ frags[n++].length = b_len;
+ }
+
+ for (i = 0; i < sh->nr_frags; i++) {
+ skb_frag_t *f = &sh->frags[i];
+ frags[n].buf = tile_net_frag_buf(f);
+ frags[n++].length = skb_frag_size(f);
+ }
+
+ return n;
+}
+
+/* Help the kernel transmit a packet. */
+static int tile_net_tx(struct sk_buff *skb, struct net_device *dev)
+{
+ struct tile_net_info *info = &__get_cpu_var(per_cpu_info);
+ struct tile_net_priv *priv = netdev_priv(dev);
+ struct tile_net_egress *egress = &egress_for_echannel[priv->echannel];
+ gxio_mpipe_equeue_t *equeue = egress->equeue;
+ struct tile_net_comps *comps =
+ info->comps_for_echannel[priv->echannel];
+ unsigned int len = skb->len;
+ unsigned char *data = skb->data;
+ unsigned int num_edescs;
+ struct frag frags[MAX_FRAGS];
+ gxio_mpipe_edesc_t edescs[MAX_FRAGS];
+ unsigned long irqflags;
+ gxio_mpipe_edesc_t edesc = { { 0 } };
+ unsigned int i;
+ s64 slot;
+
+ if (skb_is_gso(skb))
+ return tile_net_tx_tso(skb, dev);
+
+ num_edescs = tile_net_tx_frags(frags, skb, data, skb_headlen(skb));
+
+ /* This is only used to specify the TLB. */
+ edesc.stack_idx = large_buffer_stack;
+
+ /* Prepare the edescs. */
+ for (i = 0; i < num_edescs; i++) {
+ edesc.xfer_size = frags[i].length;
+ edesc.va = va_to_tile_io_addr(frags[i].buf);
+ edescs[i] = edesc;
+ }
+
+ /* Mark the final edesc. */
+ edescs[num_edescs - 1].bound = 1;
+
+ /* Add checksum info to the initial edesc, if needed. */
+ if (skb->ip_summed == CHECKSUM_PARTIAL) {
+ unsigned int csum_start = skb_checksum_start_offset(skb);
+ edescs[0].csum = 1;
+ edescs[0].csum_start = csum_start;
+ edescs[0].csum_dest = csum_start + skb->csum_offset;
+ }
+
+ local_irq_save(irqflags);
+
+ /* Try to acquire a completion entry and an egress slot. */
+ slot = tile_net_equeue_try_reserve(dev, comps, equeue, num_edescs);
+ if (slot < 0) {
+ local_irq_restore(irqflags);
+ return NETDEV_TX_BUSY;
+ }
+
+ for (i = 0; i < num_edescs; i++)
+ gxio_mpipe_equeue_put_at(equeue, edescs[i], slot++);
+
+ /* Add a completion record. */
+ add_comp(equeue, comps, slot - 1, skb);
+
+ /* NOTE: Use ETH_ZLEN for short packets (e.g. 42 < 60). */
+ tile_net_stats_add(1, &priv->stats.tx_packets);
+ tile_net_stats_add(max_t(unsigned int, len, ETH_ZLEN),
+ &priv->stats.tx_bytes);
+
+ local_irq_restore(irqflags);
+
+ /* Make sure the egress timer is scheduled. */
+ tile_net_schedule_egress_timer();
+
+ return NETDEV_TX_OK;
+}
+
+/* Return subqueue id on this core (one per core). */
+static u16 tile_net_select_queue(struct net_device *dev, struct sk_buff *skb)
+{
+ return smp_processor_id();
+}
+
+/* Deal with a transmit timeout. */
+static void tile_net_tx_timeout(struct net_device *dev)
+{
+ int cpu;
+
+ for_each_online_cpu(cpu)
+ netif_wake_subqueue(dev, cpu);
+}
+
+/* Ioctl commands. */
+static int tile_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ return -EOPNOTSUPP;
+}
+
+/* Get system network statistics for device. */
+static struct net_device_stats *tile_net_get_stats(struct net_device *dev)
+{
+ struct tile_net_priv *priv = netdev_priv(dev);
+ return &priv->stats;
+}
+
+/* Change the MTU. */
+static int tile_net_change_mtu(struct net_device *dev, int new_mtu)
+{
+ if ((new_mtu < 68) || (new_mtu > 1500))
+ return -EINVAL;
+ dev->mtu = new_mtu;
+ return 0;
+}
+
+/* Change the Ethernet address of the NIC.
+ *
+ * The hypervisor driver does not support changing MAC address. However,
+ * the hardware does not do anything with the MAC address, so the address
+ * which gets used on outgoing packets, and which is accepted on incoming
+ * packets, is completely up to us.
+ *
+ * Returns 0 on success, negative on failure.
+ */
+static int tile_net_set_mac_address(struct net_device *dev, void *p)
+{
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EINVAL;
+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+ return 0;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/* Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+static void tile_net_netpoll(struct net_device *dev)
+{
+ disable_percpu_irq(ingress_irq);
+ tile_net_handle_ingress_irq(ingress_irq, NULL);
+ enable_percpu_irq(ingress_irq, 0);
+}
+#endif
+
+static const struct net_device_ops tile_net_ops = {
+ .ndo_open = tile_net_open,
+ .ndo_stop = tile_net_stop,
+ .ndo_start_xmit = tile_net_tx,
+ .ndo_select_queue = tile_net_select_queue,
+ .ndo_do_ioctl = tile_net_ioctl,
+ .ndo_get_stats = tile_net_get_stats,
+ .ndo_change_mtu = tile_net_change_mtu,
+ .ndo_tx_timeout = tile_net_tx_timeout,
+ .ndo_set_mac_address = tile_net_set_mac_address,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = tile_net_netpoll,
+#endif
+};
+
+/* The setup function.
+ *
+ * This uses ether_setup() to assign various fields in dev, including
+ * setting IFF_BROADCAST and IFF_MULTICAST, then sets some extra fields.
+ */
+static void tile_net_setup(struct net_device *dev)
+{
+ ether_setup(dev);
+ dev->netdev_ops = &tile_net_ops;
+ dev->watchdog_timeo = TILE_NET_TIMEOUT;
+ dev->features |= NETIF_F_LLTX;
+ dev->features |= NETIF_F_HW_CSUM;
+ dev->features |= NETIF_F_SG;
+ dev->features |= NETIF_F_TSO;
+ dev->mtu = 1500;
+}
+
+/* Allocate the device structure, register the device, and obtain the
+ * MAC address from the hypervisor.
+ */
+static void tile_net_dev_init(const char *name, const uint8_t *mac)
+{
+ int ret;
+ int i;
+ int nz_addr = 0;
+ struct net_device *dev;
+ struct tile_net_priv *priv;
+
+ /* HACK: Ignore "loop" links. */
+ if (strncmp(name, "loop", 4) == 0)
+ return;
+
+ /* Allocate the device structure. Normally, "name" is a
+ * template, instantiated by register_netdev(), but not for us.
+ */
+ dev = alloc_netdev_mqs(sizeof(*priv), name, tile_net_setup,
+ NR_CPUS, 1);
+ if (!dev) {
+ pr_err("alloc_netdev_mqs(%s) failed\n", name);
+ return;
+ }
+
+ /* Initialize "priv". */
+ priv = netdev_priv(dev);
+ memset(priv, 0, sizeof(*priv));
+ priv->dev = dev;
+ priv->channel = -1;
+ priv->loopify_channel = -1;
+ priv->echannel = -1;
+
+ /* Get the MAC address and set it in the device struct; this must
+ * be done before the device is opened. If the MAC is all zeroes,
+ * we use a random address, since we're probably on the simulator.
+ */
+ for (i = 0; i < 6; i++)
+ nz_addr |= mac[i];
+
+ if (nz_addr) {
+ memcpy(dev->dev_addr, mac, 6);
+ dev->addr_len = 6;
+ } else {
+ random_ether_addr(dev->dev_addr);
+ }
+
+ /* Register the network device. */
+ ret = register_netdev(dev);
+ if (ret) {
+ netdev_err(dev, "register_netdev failed %d\n", ret);
+ free_netdev(dev);
+ return;
+ }
+}
+
+/* Per-cpu module initialization. */
+static void tile_net_init_module_percpu(void *unused)
+{
+ struct tile_net_info *info = &__get_cpu_var(per_cpu_info);
+ int my_cpu = smp_processor_id();
+
+ info->has_iqueue = false;
+
+ info->my_cpu = my_cpu;
+
+ /* Initialize the egress timer. */
+ hrtimer_init(&info->egress_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+ info->egress_timer.function = tile_net_handle_egress_timer;
+}
+
+/* Module initialization. */
+static int __init tile_net_init_module(void)
+{
+ int i;
+ char name[GXIO_MPIPE_LINK_NAME_LEN];
+ uint8_t mac[6];
+
+ pr_info("Tilera Network Driver\n");
+
+ mutex_init(&tile_net_devs_for_channel_mutex);
+
+ /* Initialize each CPU. */
+ on_each_cpu(tile_net_init_module_percpu, NULL, 1);
+
+ /* Find out what devices we have, and initialize them. */
+ for (i = 0; gxio_mpipe_link_enumerate_mac(i, name, mac) >= 0; i++)
+ tile_net_dev_init(name, mac);
+
+ if (!network_cpus_init())
+ network_cpus_map = *cpu_online_mask;
+
+ return 0;
+}
+
+module_init(tile_net_init_module);
u32 nvsp_version;
atomic_t num_outstanding_sends;
+ wait_queue_head_t wait_drain;
bool start_remove;
bool destroy;
/*
if (!net_device)
return NULL;
+ init_waitqueue_head(&net_device->wait_drain);
net_device->start_remove = false;
net_device->destroy = false;
net_device->dev = device;
spin_unlock_irqrestore(&device->channel->inbound_lock, flags);
/* Wait for all send completions */
- while (atomic_read(&net_device->num_outstanding_sends)) {
- dev_info(&device->device,
- "waiting for %d requests to complete...\n",
- atomic_read(&net_device->num_outstanding_sends));
- udelay(100);
- }
+ wait_event(net_device->wait_drain,
+ atomic_read(&net_device->num_outstanding_sends) == 0);
netvsc_disconnect_vsp(net_device);
num_outstanding_sends =
atomic_dec_return(&net_device->num_outstanding_sends);
+ if (net_device->destroy && num_outstanding_sends == 0)
+ wake_up(&net_device->wait_drain);
+
if (netif_queue_stopped(ndev) && !net_device->start_remove &&
(hv_ringbuf_avail_percent(&device->channel->outbound)
> RING_AVAIL_PERCENT_HIWATER ||
#define IP1001_APS_ON 11 /* IP1001 APS Mode bit */
#define IP101A_G_APS_ON 2 /* IP101A/G APS Mode bit */
#define IP101A_G_IRQ_CONF_STATUS 0x11 /* Conf Info IRQ & Status Reg */
+#define IP101A_G_IRQ_PIN_USED (1<<15) /* INTR pin used */
+#define IP101A_G_IRQ_DEFAULT IP101A_G_IRQ_PIN_USED
static int ip175c_config_init(struct phy_device *phydev)
{
if (c < 0)
return c;
+ /* INTR pin used: speed/link/duplex will cause an interrupt */
+ c = phy_write(phydev, IP101A_G_IRQ_CONF_STATUS, IP101A_G_IRQ_DEFAULT);
+ if (c < 0)
+ return c;
+
if (phydev->interface == PHY_INTERFACE_MODE_RGMII) {
/* Additional delay (2ns) used to adjust RX clock phase
* at RGMII interface */
struct mdio_mux_parent_bus *pb = cb->parent;
int r;
- mutex_lock(&pb->mii_bus->mdio_lock);
+ /* In theory multiple mdio_mux could be stacked, thus creating
+ * more than a single level of nesting. But in practice,
+ * SINGLE_DEPTH_NESTING will cover the vast majority of use
+ * cases. We use it, instead of trying to handle the general
+ * case.
+ */
+ mutex_lock_nested(&pb->mii_bus->mdio_lock, SINGLE_DEPTH_NESTING);
r = pb->switch_fn(pb->current_child, cb->bus_number, pb->switch_data);
if (r)
goto out;
int r;
- mutex_lock(&pb->mii_bus->mdio_lock);
+ mutex_lock_nested(&pb->mii_bus->mdio_lock, SINGLE_DEPTH_NESTING);
r = pb->switch_fn(pb->current_child, cb->bus_number, pb->switch_data);
if (r)
goto out;
}
/**
* of_mdio_find_bus - Given an mii_bus node, find the mii_bus.
- * @mdio_np: Pointer to the mii_bus.
+ * @mdio_bus_np: Pointer to the mii_bus.
*
* Returns a pointer to the mii_bus, or NULL if none found.
*
static struct phy_driver ks8001_driver = {
.phy_id = PHY_ID_KS8001,
.name = "Micrel KS8001 or KS8721",
- .phy_id_mask = 0x00fffff0,
+ .phy_id_mask = 0x00ffffff,
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
.config_init = kszphy_config_init,
static struct phy_driver ksz9021_driver = {
.phy_id = PHY_ID_KSZ9021,
- .phy_id_mask = 0x000fff10,
+ .phy_id_mask = 0x000ffffe,
.name = "Micrel KSZ9021 Gigabit PHY",
.features = (PHY_GBIT_FEATURES | SUPPORTED_Pause
| SUPPORTED_Asym_Pause),
MODULE_LICENSE("GPL");
static struct mdio_device_id __maybe_unused micrel_tbl[] = {
- { PHY_ID_KSZ9021, 0x000fff10 },
- { PHY_ID_KS8001, 0x00fffff0 },
+ { PHY_ID_KSZ9021, 0x000ffffe },
+ { PHY_ID_KS8001, 0x00ffffff },
{ PHY_ID_KS8737, 0x00fffff0 },
{ PHY_ID_KS8041, 0x00fffff0 },
{ PHY_ID_KS8051, 0x00fffff0 },
#define USB_PRODUCT_IPHONE_3G 0x1292
#define USB_PRODUCT_IPHONE_3GS 0x1294
#define USB_PRODUCT_IPHONE_4 0x1297
+#define USB_PRODUCT_IPAD 0x129a
#define USB_PRODUCT_IPHONE_4_VZW 0x129c
#define USB_PRODUCT_IPHONE_4S 0x12a0
USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4,
IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
IPHETH_USBINTF_PROTO) },
+ { USB_DEVICE_AND_INTERFACE_INFO(
+ USB_VENDOR_APPLE, USB_PRODUCT_IPAD,
+ IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
+ IPHETH_USBINTF_PROTO) },
{ USB_DEVICE_AND_INTERFACE_INFO(
USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4_VZW,
IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
static int qmi_wwan_cdc_wdm_manage_power(struct usb_interface *intf, int on)
{
struct usbnet *dev = usb_get_intfdata(intf);
+
+ /* can be called while disconnecting */
+ if (!dev)
+ return 0;
return qmi_wwan_manage_power(dev, on);
}
return rv;
}
-/* Gobi devices uses identical class/protocol codes for all interfaces regardless
- * of function. Some of these are CDC ACM like and have the exact same endpoints
- * we are looking for. This leaves two possible strategies for identifying the
- * correct interface:
- * a) hardcoding interface number, or
- * b) use the fact that the wwan interface is the only one lacking additional
- * (CDC functional) descriptors
- *
- * Let's see if we can get away with the generic b) solution.
- */
-static int qmi_wwan_bind_gobi(struct usbnet *dev, struct usb_interface *intf)
-{
- int rv = -EINVAL;
-
- /* ignore any interface with additional descriptors */
- if (intf->cur_altsetting->extralen)
- goto err;
-
- rv = qmi_wwan_bind_shared(dev, intf);
-err:
- return rv;
-}
-
static void qmi_wwan_unbind_shared(struct usbnet *dev, struct usb_interface *intf)
{
struct usb_driver *subdriver = (void *)dev->data[0];
.manage_power = qmi_wwan_manage_power,
};
-static const struct driver_info qmi_wwan_gobi = {
- .description = "Qualcomm Gobi wwan/QMI device",
+static const struct driver_info qmi_wwan_force_int0 = {
+ .description = "Qualcomm WWAN/QMI device",
.flags = FLAG_WWAN,
- .bind = qmi_wwan_bind_gobi,
+ .bind = qmi_wwan_bind_shared,
.unbind = qmi_wwan_unbind_shared,
.manage_power = qmi_wwan_manage_power,
+ .data = BIT(0), /* interface whitelist bitmap */
};
-/* ZTE suck at making USB descriptors */
static const struct driver_info qmi_wwan_force_int1 = {
.description = "Qualcomm WWAN/QMI device",
.flags = FLAG_WWAN,
.data = BIT(1), /* interface whitelist bitmap */
};
+static const struct driver_info qmi_wwan_force_int2 = {
+ .description = "Qualcomm WWAN/QMI device",
+ .flags = FLAG_WWAN,
+ .bind = qmi_wwan_bind_shared,
+ .unbind = qmi_wwan_unbind_shared,
+ .manage_power = qmi_wwan_manage_power,
+ .data = BIT(2), /* interface whitelist bitmap */
+};
+
+static const struct driver_info qmi_wwan_force_int3 = {
+ .description = "Qualcomm WWAN/QMI device",
+ .flags = FLAG_WWAN,
+ .bind = qmi_wwan_bind_shared,
+ .unbind = qmi_wwan_unbind_shared,
+ .manage_power = qmi_wwan_manage_power,
+ .data = BIT(3), /* interface whitelist bitmap */
+};
+
static const struct driver_info qmi_wwan_force_int4 = {
.description = "Qualcomm WWAN/QMI device",
.flags = FLAG_WWAN,
static const struct driver_info qmi_wwan_sierra = {
.description = "Sierra Wireless wwan/QMI device",
.flags = FLAG_WWAN,
- .bind = qmi_wwan_bind_gobi,
+ .bind = qmi_wwan_bind_shared,
.unbind = qmi_wwan_unbind_shared,
.manage_power = qmi_wwan_manage_power,
.data = BIT(8) | BIT(19), /* interface whitelist bitmap */
};
#define HUAWEI_VENDOR_ID 0x12D1
+
+/* Gobi 1000 QMI/wwan interface number is 3 according to qcserial */
+#define QMI_GOBI1K_DEVICE(vend, prod) \
+ USB_DEVICE(vend, prod), \
+ .driver_info = (unsigned long)&qmi_wwan_force_int3
+
+/* Gobi 2000 and Gobi 3000 QMI/wwan interface number is 0 according to qcserial */
#define QMI_GOBI_DEVICE(vend, prod) \
USB_DEVICE(vend, prod), \
- .driver_info = (unsigned long)&qmi_wwan_gobi
+ .driver_info = (unsigned long)&qmi_wwan_force_int0
static const struct usb_device_id products[] = {
{ /* Huawei E392, E398 and possibly others sharing both device id and more... */
.bInterfaceProtocol = 0xff,
.driver_info = (unsigned long)&qmi_wwan_force_int4,
},
+ { /* ZTE MF60 */
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x19d2,
+ .idProduct = 0x1402,
+ .bInterfaceClass = 0xff,
+ .bInterfaceSubClass = 0xff,
+ .bInterfaceProtocol = 0xff,
+ .driver_info = (unsigned long)&qmi_wwan_force_int2,
+ },
{ /* Sierra Wireless MC77xx in QMI mode */
.match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO,
.idVendor = 0x1199,
.bInterfaceProtocol = 0xff,
.driver_info = (unsigned long)&qmi_wwan_sierra,
},
- {QMI_GOBI_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */
- {QMI_GOBI_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */
- {QMI_GOBI_DEVICE(0x03f0, 0x371d)}, /* HP un2430 Mobile Broadband Module */
- {QMI_GOBI_DEVICE(0x04da, 0x250d)}, /* Panasonic Gobi Modem device */
- {QMI_GOBI_DEVICE(0x413c, 0x8172)}, /* Dell Gobi Modem device */
- {QMI_GOBI_DEVICE(0x1410, 0xa001)}, /* Novatel Gobi Modem device */
- {QMI_GOBI_DEVICE(0x0b05, 0x1776)}, /* Asus Gobi Modem device */
- {QMI_GOBI_DEVICE(0x19d2, 0xfff3)}, /* ONDA Gobi Modem device */
- {QMI_GOBI_DEVICE(0x05c6, 0x9001)}, /* Generic Gobi Modem device */
- {QMI_GOBI_DEVICE(0x05c6, 0x9002)}, /* Generic Gobi Modem device */
- {QMI_GOBI_DEVICE(0x05c6, 0x9202)}, /* Generic Gobi Modem device */
- {QMI_GOBI_DEVICE(0x05c6, 0x9203)}, /* Generic Gobi Modem device */
- {QMI_GOBI_DEVICE(0x05c6, 0x9222)}, /* Generic Gobi Modem device */
- {QMI_GOBI_DEVICE(0x05c6, 0x9009)}, /* Generic Gobi Modem device */
+
+ /* Gobi 1000 devices */
+ {QMI_GOBI1K_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */
+ {QMI_GOBI1K_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */
+ {QMI_GOBI1K_DEVICE(0x03f0, 0x371d)}, /* HP un2430 Mobile Broadband Module */
+ {QMI_GOBI1K_DEVICE(0x04da, 0x250d)}, /* Panasonic Gobi Modem device */
+ {QMI_GOBI1K_DEVICE(0x413c, 0x8172)}, /* Dell Gobi Modem device */
+ {QMI_GOBI1K_DEVICE(0x1410, 0xa001)}, /* Novatel Gobi Modem device */
+ {QMI_GOBI1K_DEVICE(0x0b05, 0x1776)}, /* Asus Gobi Modem device */
+ {QMI_GOBI1K_DEVICE(0x19d2, 0xfff3)}, /* ONDA Gobi Modem device */
+ {QMI_GOBI1K_DEVICE(0x05c6, 0x9001)}, /* Generic Gobi Modem device */
+ {QMI_GOBI1K_DEVICE(0x05c6, 0x9002)}, /* Generic Gobi Modem device */
+ {QMI_GOBI1K_DEVICE(0x05c6, 0x9202)}, /* Generic Gobi Modem device */
+ {QMI_GOBI1K_DEVICE(0x05c6, 0x9203)}, /* Generic Gobi Modem device */
+ {QMI_GOBI1K_DEVICE(0x05c6, 0x9222)}, /* Generic Gobi Modem device */
+ {QMI_GOBI1K_DEVICE(0x05c6, 0x9009)}, /* Generic Gobi Modem device */
+
+ /* Gobi 2000 and 3000 devices */
{QMI_GOBI_DEVICE(0x413c, 0x8186)}, /* Dell Gobi 2000 Modem device (N0218, VU936) */
{QMI_GOBI_DEVICE(0x05c6, 0x920b)}, /* Generic Gobi 2000 Modem device */
{QMI_GOBI_DEVICE(0x05c6, 0x9225)}, /* Sony Gobi 2000 Modem device (N0279, VU730) */
}
static const u8 sierra_net_ifnum_list[] = { 7, 10, 11 };
-static const struct sierra_net_info_data sierra_net_info_data_68A3 = {
+static const struct sierra_net_info_data sierra_net_info_data_direct_ip = {
.rx_urb_size = 8 * 1024,
.whitelist = {
.infolen = ARRAY_SIZE(sierra_net_ifnum_list),
}
};
-static const struct driver_info sierra_net_info_68A3 = {
+static const struct driver_info sierra_net_info_direct_ip = {
.description = "Sierra Wireless USB-to-WWAN Modem",
.flags = FLAG_WWAN | FLAG_SEND_ZLP,
.bind = sierra_net_bind,
.status = sierra_net_status,
.rx_fixup = sierra_net_rx_fixup,
.tx_fixup = sierra_net_tx_fixup,
- .data = (unsigned long)&sierra_net_info_data_68A3,
+ .data = (unsigned long)&sierra_net_info_data_direct_ip,
};
static const struct usb_device_id products[] = {
{USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless USB-to-WWAN modem */
- .driver_info = (unsigned long) &sierra_net_info_68A3},
+ .driver_info = (unsigned long) &sierra_net_info_direct_ip},
+ {USB_DEVICE(0x0F3D, 0x68A3), /* AT&T Direct IP modem */
+ .driver_info = (unsigned long) &sierra_net_info_direct_ip},
+ {USB_DEVICE(0x1199, 0x68AA), /* Sierra Wireless Direct IP LTE modem */
+ .driver_info = (unsigned long) &sierra_net_info_direct_ip},
+ {USB_DEVICE(0x0F3D, 0x68AA), /* AT&T Direct IP LTE modem */
+ .driver_info = (unsigned long) &sierra_net_info_direct_ip},
{}, /* last item */
};
if (info->manage_power) {
retval = info->manage_power(dev, 1);
if (retval < 0)
- goto done;
+ goto done_manage_power_error;
usb_autopm_put_interface(dev->intf);
}
return retval;
+done_manage_power_error:
+ clear_bit(EVENT_DEV_OPEN, &dev->flags);
done:
usb_autopm_put_interface(dev->intf);
done_nopm:
{
struct usbnet *dev = netdev_priv(net);
- strncpy (info->driver, dev->driver_name, sizeof info->driver);
- strncpy (info->version, DRIVER_VERSION, sizeof info->version);
- strncpy (info->fw_version, dev->driver_info->description,
+ strlcpy (info->driver, dev->driver_name, sizeof info->driver);
+ strlcpy (info->version, DRIVER_VERSION, sizeof info->version);
+ strlcpy (info->fw_version, dev->driver_info->description,
sizeof info->fw_version);
usb_make_path (dev->udev, info->bus_info, sizeof info->bus_info);
}
}
EXPORT_SYMBOL_GPL(usbnet_start_xmit);
+static void rx_alloc_submit(struct usbnet *dev, gfp_t flags)
+{
+ struct urb *urb;
+ int i;
+
+ /* don't refill the queue all at once */
+ for (i = 0; i < 10 && dev->rxq.qlen < RX_QLEN(dev); i++) {
+ urb = usb_alloc_urb(0, flags);
+ if (urb != NULL) {
+ if (rx_submit(dev, urb, flags) == -ENOLINK)
+ return;
+ }
+ }
+}
+
/*-------------------------------------------------------------------------*/
// tasklet (work deferred from completions, in_irq) or timer
!timer_pending (&dev->delay) &&
!test_bit (EVENT_RX_HALT, &dev->flags)) {
int temp = dev->rxq.qlen;
- int qlen = RX_QLEN (dev);
-
- if (temp < qlen) {
- struct urb *urb;
- int i;
-
- // don't refill the queue all at once
- for (i = 0; i < 10 && dev->rxq.qlen < qlen; i++) {
- urb = usb_alloc_urb (0, GFP_ATOMIC);
- if (urb != NULL) {
- if (rx_submit (dev, urb, GFP_ATOMIC) ==
- -ENOLINK)
- return;
- }
- }
+
+ if (temp < RX_QLEN(dev)) {
+ rx_alloc_submit(dev, GFP_ATOMIC);
if (temp != dev->rxq.qlen)
netif_dbg(dev, link, dev->net,
"rxqlen %d --> %d\n",
temp, dev->rxq.qlen);
- if (dev->rxq.qlen < qlen)
+ if (dev->rxq.qlen < RX_QLEN(dev))
tasklet_schedule (&dev->bh);
}
if (dev->txq.qlen < TX_QLEN (dev))
spin_lock_irq(&dev->txq.lock);
/* don't autosuspend while transmitting */
if (dev->txq.qlen && PMSG_IS_AUTO(message)) {
+ dev->suspend_count--;
spin_unlock_irq(&dev->txq.lock);
return -EBUSY;
} else {
spin_unlock_irq(&dev->txq.lock);
if (test_bit(EVENT_DEV_OPEN, &dev->flags)) {
+ /* handle remote wakeup ASAP */
+ if (!dev->wait &&
+ netif_device_present(dev->net) &&
+ !timer_pending(&dev->delay) &&
+ !test_bit(EVENT_RX_HALT, &dev->flags))
+ rx_alloc_submit(dev, GFP_KERNEL);
+
if (!(dev->txq.qlen >= TX_QLEN(dev)))
netif_tx_wake_all_queues(dev->net);
tasklet_schedule (&dev->bh);
#define VIRTNET_DRIVER_VERSION "1.0.0"
struct virtnet_stats {
- struct u64_stats_sync syncp;
+ struct u64_stats_sync tx_syncp;
+ struct u64_stats_sync rx_syncp;
u64 tx_bytes;
u64 tx_packets;
hdr = skb_vnet_hdr(skb);
- u64_stats_update_begin(&stats->syncp);
+ u64_stats_update_begin(&stats->rx_syncp);
stats->rx_bytes += skb->len;
stats->rx_packets++;
- u64_stats_update_end(&stats->syncp);
+ u64_stats_update_end(&stats->rx_syncp);
if (hdr->hdr.flags & VIRTIO_NET_HDR_F_NEEDS_CSUM) {
pr_debug("Needs csum!\n");
while ((skb = virtqueue_get_buf(vi->svq, &len)) != NULL) {
pr_debug("Sent skb %p\n", skb);
- u64_stats_update_begin(&stats->syncp);
+ u64_stats_update_begin(&stats->tx_syncp);
stats->tx_bytes += skb->len;
stats->tx_packets++;
- u64_stats_update_end(&stats->syncp);
+ u64_stats_update_end(&stats->tx_syncp);
tot_sgs += skb_vnet_hdr(skb)->num_sg;
dev_kfree_skb_any(skb);
u64 tpackets, tbytes, rpackets, rbytes;
do {
- start = u64_stats_fetch_begin(&stats->syncp);
+ start = u64_stats_fetch_begin(&stats->tx_syncp);
tpackets = stats->tx_packets;
tbytes = stats->tx_bytes;
+ } while (u64_stats_fetch_retry(&stats->tx_syncp, start));
+
+ do {
+ start = u64_stats_fetch_begin(&stats->rx_syncp);
rpackets = stats->rx_packets;
rbytes = stats->rx_bytes;
- } while (u64_stats_fetch_retry(&stats->syncp, start));
+ } while (u64_stats_fetch_retry(&stats->rx_syncp, start));
tot->rx_packets += rpackets;
tot->tx_packets += tpackets;
}
} else {
dwrq->flags = 1; /* Should be define'd */
- memcpy(extra + sizeof(struct sockaddr)*i,
- &qual, sizeof(struct iw_quality)*i);
+ memcpy(extra + sizeof(struct sockaddr) * i, qual,
+ sizeof(struct iw_quality) * i);
}
dwrq->length = i;
u32 keymax;
DECLARE_BITMAP(keymap, ATH_KEYMAX);
DECLARE_BITMAP(tkip_keymap, ATH_KEYMAX);
+ DECLARE_BITMAP(ccmp_keymap, ATH_KEYMAX);
enum ath_crypt_caps crypt_caps;
unsigned int clockrate;
ath5k_txbuf_free_skb(ah, bf);
- spin_lock_bh(&ah->txbuflock);
+ spin_lock(&ah->txbuflock);
list_move_tail(&bf->list, &ah->txbuf);
ah->txbuf_len++;
txq->txq_len--;
- spin_unlock_bh(&ah->txbuflock);
+ spin_unlock(&ah->txbuflock);
}
txq->link = NULL;
txq->txq_poll_mark = false;
enum ath9k_key_type keytype;
u8 keyix;
u8 retries;
+ u8 rtscts_rate;
};
struct ath_buf_state {
priv->num_sta_assoc_vif++ : priv->num_sta_assoc_vif--;
if (priv->ah->opmode == NL80211_IFTYPE_STATION) {
+ ath9k_htc_choose_set_bssid(priv);
if (bss_conf->assoc && (priv->num_sta_assoc_vif == 1))
ath9k_htc_start_ani(priv);
else if (priv->num_sta_assoc_vif == 0)
}
}
- if (changed & BSS_CHANGED_BSSID) {
+ if (changed & BSS_CHANGED_IBSS) {
if (priv->ah->opmode == NL80211_IFTYPE_ADHOC) {
common->curaid = bss_conf->aid;
memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN);
ath9k_htc_set_bssid(priv);
- } else if (priv->ah->opmode == NL80211_IFTYPE_STATION) {
- ath9k_htc_choose_set_bssid(priv);
}
}
if (NR_CPUS > 1 && ah->config.serialize_regmode == SER_REG_MODE_AUTO) {
if (ah->hw_version.macVersion == AR_SREV_VERSION_5416_PCI ||
- ((AR_SREV_9160(ah) || AR_SREV_9280(ah)) &&
+ ((AR_SREV_9160(ah) || AR_SREV_9280(ah) || AR_SREV_9287(ah)) &&
!ah->is_pciexpress)) {
ah->config.serialize_regmode =
SER_REG_MODE_ON;
u32 ar9003_get_pll_sqsum_dvc(struct ath_hw *ah)
{
+ struct ath_common *common = ath9k_hw_common(ah);
+ int i = 0;
+
REG_CLR_BIT(ah, PLL3, PLL3_DO_MEAS_MASK);
udelay(100);
REG_SET_BIT(ah, PLL3, PLL3_DO_MEAS_MASK);
- while ((REG_READ(ah, PLL4) & PLL4_MEAS_DONE) == 0)
+ while ((REG_READ(ah, PLL4) & PLL4_MEAS_DONE) == 0) {
+
udelay(100);
+ if (WARN_ON_ONCE(i >= 100)) {
+ ath_err(common, "PLL4 meaurement not done\n");
+ break;
+ }
+
+ i++;
+ }
+
return (REG_READ(ah, PLL3) & SQSUM_DVC_MASK) >> 3;
}
EXPORT_SYMBOL(ar9003_get_pll_sqsum_dvc);
hw_pll_work.work);
u32 pll_sqsum;
+ /*
+ * ensure that the PLL WAR is executed only
+ * after the STA is associated (or) if the
+ * beaconing had started in interfaces that
+ * uses beacons.
+ */
+ if (!(sc->sc_flags & SC_OP_BEACONS))
+ return;
+
if (AR_SREV_9485(sc->sc_ah)) {
ath9k_ps_wakeup(sc);
}
}
- if ((ah->opmode == NL80211_IFTYPE_ADHOC) ||
- ((vif->type == NL80211_IFTYPE_ADHOC) &&
- sc->nvifs > 0)) {
- ath_err(common, "Cannot create ADHOC interface when other"
- " interfaces already exist.\n");
- ret = -EINVAL;
- goto out;
- }
-
ath_dbg(common, CONFIG, "Attach a VIF of type: %d\n", vif->type);
sc->nvifs++;
mutex_lock(&sc->mutex);
ath9k_ps_wakeup(sc);
- /* See if new interface type is valid. */
- if ((new_type == NL80211_IFTYPE_ADHOC) &&
- (sc->nvifs > 1)) {
- ath_err(common, "When using ADHOC, it must be the only"
- " interface.\n");
- ret = -EINVAL;
- goto out;
- }
-
if (ath9k_uses_beacons(new_type) &&
!ath9k_uses_beacons(vif->type)) {
if (sc->nbcnvifs >= ATH_BCBUF) {
__skb_unlink(skb, &rx_edma->rx_fifo);
list_add_tail(&bf->list, &sc->rx.rxbuf);
ath_rx_edma_buf_link(sc, qtype);
- } else {
- bf = NULL;
}
+
+ bf = NULL;
}
*dest = bf;
* descriptor does contain a valid key index. This has been observed
* mostly with CCMP encryption.
*/
- if (rx_stats->rs_keyix == ATH9K_RXKEYIX_INVALID)
+ if (rx_stats->rs_keyix == ATH9K_RXKEYIX_INVALID ||
+ !test_bit(rx_stats->rs_keyix, common->ccmp_keymap))
rx_stats->rs_status &= ~ATH9K_RXERR_KEYMISS;
if (!rx_stats->rs_datalen) {
struct ieee80211_tx_rate *rates;
const struct ieee80211_rate *rate;
struct ieee80211_hdr *hdr;
+ struct ath_frame_info *fi = get_frame_info(bf->bf_mpdu);
int i;
u8 rix = 0;
/* set dur_update_en for l-sig computation except for PS-Poll frames */
info->dur_update = !ieee80211_is_pspoll(hdr->frame_control);
-
- /*
- * We check if Short Preamble is needed for the CTS rate by
- * checking the BSS's global flag.
- * But for the rate series, IEEE80211_TX_RC_USE_SHORT_PREAMBLE is used.
- */
- rate = ieee80211_get_rts_cts_rate(sc->hw, tx_info);
- info->rtscts_rate = rate->hw_value;
-
- if (tx_info->control.vif &&
- tx_info->control.vif->bss_conf.use_short_preamble)
- info->rtscts_rate |= rate->hw_value_short;
+ info->rtscts_rate = fi->rtscts_rate;
for (i = 0; i < 4; i++) {
bool is_40, is_sgi, is_sp;
}
/* legacy rates */
+ rate = &sc->sbands[tx_info->band].bitrates[rates[i].idx];
if ((tx_info->band == IEEE80211_BAND_2GHZ) &&
!(rate->flags & IEEE80211_RATE_ERP_G))
phy = WLAN_RC_PHY_CCK;
else
phy = WLAN_RC_PHY_OFDM;
- rate = &sc->sbands[tx_info->band].bitrates[rates[i].idx];
info->rates[i].Rate = rate->hw_value;
if (rate->hw_value_short) {
if (rates[i].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
struct ieee80211_sta *sta = tx_info->control.sta;
struct ieee80211_key_conf *hw_key = tx_info->control.hw_key;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+ const struct ieee80211_rate *rate;
struct ath_frame_info *fi = get_frame_info(skb);
struct ath_node *an = NULL;
enum ath9k_key_type keytype;
+ bool short_preamble = false;
+
+ /*
+ * We check if Short Preamble is needed for the CTS rate by
+ * checking the BSS's global flag.
+ * But for the rate series, IEEE80211_TX_RC_USE_SHORT_PREAMBLE is used.
+ */
+ if (tx_info->control.vif &&
+ tx_info->control.vif->bss_conf.use_short_preamble)
+ short_preamble = true;
+ rate = ieee80211_get_rts_cts_rate(hw, tx_info);
keytype = ath9k_cmn_get_hw_crypto_keytype(skb);
if (sta)
fi->keyix = ATH9K_TXKEYIX_INVALID;
fi->keytype = keytype;
fi->framelen = framelen;
+ fi->rtscts_rate = rate->hw_value;
+ if (short_preamble)
+ fi->rtscts_rate |= rate->hw_value_short;
}
u8 ath_txchainmask_reduction(struct ath_softc *sc, u8 chainmask, u32 rate)
return -EIO;
set_bit(idx, common->keymap);
+ if (key->cipher == WLAN_CIPHER_SUITE_CCMP)
+ set_bit(idx, common->ccmp_keymap);
+
if (key->cipher == WLAN_CIPHER_SUITE_TKIP) {
set_bit(idx + 64, common->keymap);
set_bit(idx, common->tkip_keymap);
return;
clear_bit(key->hw_key_idx, common->keymap);
+ clear_bit(key->hw_key_idx, common->ccmp_keymap);
if (key->cipher != WLAN_CIPHER_SUITE_TKIP)
return;
* from the mac80211 subsystem. */
u16 mac80211_initially_registered_queues;
+ /* Set this if we call ieee80211_register_hw() and check if we call
+ * ieee80211_unregister_hw(). */
+ bool hw_registred;
+
/* We can only have one operating interface (802.11 core)
* at a time. General information about this interface follows.
*/
err = ieee80211_register_hw(wl->hw);
if (err)
goto err_one_core_detach;
+ wl->hw_registred = true;
b43_leds_register(wl->current_dev);
goto out;
if (prev_status >= B43_STAT_STARTED) {
err = b43_wireless_core_start(up_dev);
if (err) {
- b43err(wl, "Fatal: Coult not start device for "
+ b43err(wl, "Fatal: Could not start device for "
"selected %s-GHz band\n",
band_to_string(chan->band));
b43_wireless_core_exit(up_dev);
hw->queues = modparam_qos ? B43_QOS_QUEUE_NUM : 1;
wl->mac80211_initially_registered_queues = hw->queues;
+ wl->hw_registred = false;
hw->max_rates = 2;
SET_IEEE80211_DEV(hw, dev->dev);
if (is_valid_ether_addr(sprom->et1mac))
* as the ieee80211 unreg will destroy the workqueue. */
cancel_work_sync(&wldev->restart_work);
- /* Restore the queues count before unregistering, because firmware detect
- * might have modified it. Restoring is important, so the networking
- * stack can properly free resources. */
- wl->hw->queues = wl->mac80211_initially_registered_queues;
- b43_leds_stop(wldev);
- ieee80211_unregister_hw(wl->hw);
+ B43_WARN_ON(!wl);
+ if (wl->current_dev == wldev && wl->hw_registred) {
+ /* Restore the queues count before unregistering, because firmware detect
+ * might have modified it. Restoring is important, so the networking
+ * stack can properly free resources. */
+ wl->hw->queues = wl->mac80211_initially_registered_queues;
+ b43_leds_stop(wldev);
+ ieee80211_unregister_hw(wl->hw);
+ }
b43_one_core_detach(wldev->dev);
cancel_work_sync(&wldev->restart_work);
B43_WARN_ON(!wl);
- if (wl->current_dev == wldev) {
+ if (wl->current_dev == wldev && wl->hw_registred) {
/* Restore the queues count before unregistering, because firmware detect
* might have modified it. Restoring is important, so the networking
* stack can properly free resources. */
meta->dmaaddr = map_descbuffer(ring, skb->data, skb->len, 1);
/* create a bounce buffer in zone_dma on mapping failure. */
if (b43legacy_dma_mapping_error(ring, meta->dmaaddr, skb->len, 1)) {
- bounce_skb = __dev_alloc_skb(skb->len, GFP_ATOMIC | GFP_DMA);
+ bounce_skb = alloc_skb(skb->len, GFP_ATOMIC | GFP_DMA);
if (!bounce_skb) {
ring->current_slot = old_top_slot;
ring->used_slots = old_used_slots;
if (prev_status >= B43legacy_STAT_STARTED) {
err = b43legacy_wireless_core_start(up_dev);
if (err) {
- b43legacyerr(wl, "Fatal: Coult not start device for "
+ b43legacyerr(wl, "Fatal: Could not start device for "
"newly selected %s-PHY mode\n",
phymode_to_string(new_mode));
b43legacy_wireless_core_exit(up_dev);
data |= 1 << SDIO_FUNC_1 | 1 << SDIO_FUNC_2 | 1;
brcmf_sdio_regwb(sdiodev, SDIO_CCCR_IENx, data, &ret);
- /* redirect, configure ane enable io for interrupt signal */
+ /* redirect, configure and enable io for interrupt signal */
data = SDIO_SEPINT_MASK | SDIO_SEPINT_OE;
- if (sdiodev->irq_flags | IRQF_TRIGGER_HIGH)
+ if (sdiodev->irq_flags & IRQF_TRIGGER_HIGH)
data |= SDIO_SEPINT_ACT_HI;
brcmf_sdio_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, data, &ret);
netif_stop_queue(priv->net_dev);
}
-/* Called by register_netdev() */
-static int ipw2100_net_init(struct net_device *dev)
-{
- struct ipw2100_priv *priv = libipw_priv(dev);
-
- return ipw2100_up(priv, 1);
-}
-
static int ipw2100_wdev_init(struct net_device *dev)
{
struct ipw2100_priv *priv = libipw_priv(dev);
.ndo_stop = ipw2100_close,
.ndo_start_xmit = libipw_xmit,
.ndo_change_mtu = libipw_change_mtu,
- .ndo_init = ipw2100_net_init,
.ndo_tx_timeout = ipw2100_tx_timeout,
.ndo_set_mac_address = ipw2100_set_address,
.ndo_validate_addr = eth_validate_addr,
printk(KERN_INFO DRV_NAME
": Detected Intel PRO/Wireless 2100 Network Connection\n");
+ err = ipw2100_up(priv, 1);
+ if (err)
+ goto fail;
+
err = ipw2100_wdev_init(dev);
if (err)
goto fail;
* network device we would call ipw2100_up. This introduced a race
* condition with newer hotplug configurations (network was coming
* up and making calls before the device was initialized).
- *
- * If we called ipw2100_up before we registered the device, then the
- * device name wasn't registered. So, we instead use the net_dev->init
- * member to call a function that then just turns and calls ipw2100_up.
- * net_dev->init is called after name allocation but before the
- * notifier chain is called */
+ */
err = register_netdev(dev);
if (err) {
printk(KERN_WARNING DRV_NAME
return 0;
}
- if (il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET) {
+ if (il->stations[sta_id].sta.key.key_flags & STA_KEY_FLG_INVALID) {
IL_WARN("Removing wrong key %d 0x%x\n", keyconf->keyidx,
key_flags);
spin_unlock_irqrestore(&il->sta_lock, flags);
memset(&il->stations[sta_id].sta.key, 0, sizeof(struct il4965_keyinfo));
il->stations[sta_id].sta.key.key_flags =
STA_KEY_FLG_NO_ENC | STA_KEY_FLG_INVALID;
- il->stations[sta_id].sta.key.key_offset = WEP_INVALID_OFFSET;
+ il->stations[sta_id].sta.key.key_offset = keyconf->hw_key_idx;
il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
return;
/* monitor and check for other stuck queues */
- if (il_is_any_associated(il)) {
- for (cnt = 0; cnt < il->hw_params.max_txq_num; cnt++) {
- /* skip as we already checked the command queue */
- if (cnt == il->cmd_queue)
- continue;
- if (il_check_stuck_queue(il, cnt))
- return;
- }
+ for (cnt = 0; cnt < il->hw_params.max_txq_num; cnt++) {
+ /* skip as we already checked the command queue */
+ if (cnt == il->cmd_queue)
+ continue;
+ if (il_check_stuck_queue(il, cnt))
+ return;
}
mod_timer(&il->watchdog,
#define IWL6000_UCODE_API_MAX 6
#define IWL6050_UCODE_API_MAX 5
#define IWL6000G2_UCODE_API_MAX 6
+#define IWL6035_UCODE_API_MAX 6
/* Oldest version we won't warn about */
#define IWL6000_UCODE_API_OK 4
#define IWL6000G2_UCODE_API_OK 5
#define IWL6050_UCODE_API_OK 5
#define IWL6000G2B_UCODE_API_OK 6
+#define IWL6035_UCODE_API_OK 6
/* Lowest firmware API version supported */
#define IWL6000_UCODE_API_MIN 4
#define IWL6050_UCODE_API_MIN 4
-#define IWL6000G2_UCODE_API_MIN 4
+#define IWL6000G2_UCODE_API_MIN 5
+#define IWL6035_UCODE_API_MIN 6
/* EEPROM versions */
#define EEPROM_6000_TX_POWER_VERSION (4)
IWL_DEVICE_6030,
};
+#define IWL_DEVICE_6035 \
+ .fw_name_pre = IWL6030_FW_PRE, \
+ .ucode_api_max = IWL6035_UCODE_API_MAX, \
+ .ucode_api_ok = IWL6035_UCODE_API_OK, \
+ .ucode_api_min = IWL6035_UCODE_API_MIN, \
+ .device_family = IWL_DEVICE_FAMILY_6030, \
+ .max_inst_size = IWL60_RTC_INST_SIZE, \
+ .max_data_size = IWL60_RTC_DATA_SIZE, \
+ .eeprom_ver = EEPROM_6030_EEPROM_VERSION, \
+ .eeprom_calib_ver = EEPROM_6030_TX_POWER_VERSION, \
+ .base_params = &iwl6000_g2_base_params, \
+ .bt_params = &iwl6000_bt_params, \
+ .need_temp_offset_calib = true, \
+ .led_mode = IWL_LED_RF_STATE, \
+ .adv_pm = true
+
const struct iwl_cfg iwl6035_2agn_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6235 AGN",
- IWL_DEVICE_6030,
+ IWL_DEVICE_6035,
.ht_params = &iwl6000_ht_params,
};
key_flags |= STA_KEY_MULTICAST_MSK;
sta_cmd.key.key_flags = key_flags;
- sta_cmd.key.key_offset = WEP_INVALID_OFFSET;
+ sta_cmd.key.key_offset = keyconf->hw_key_idx;
sta_cmd.sta.modify_mask = STA_MODIFY_KEY_MASK;
sta_cmd.mode = STA_CONTROL_MODIFY_MSK;
return count;
}
+#ifdef CONFIG_IWLWIFI_DEBUG
static ssize_t iwl_dbgfs_log_event_read(struct file *file,
char __user *user_buf,
size_t count, loff_t *ppos)
return count;
}
+#endif
static ssize_t iwl_dbgfs_calib_disabled_read(struct file *file,
char __user *user_buf,
DEBUGFS_READ_WRITE_FILE_OPS(protection_mode);
DEBUGFS_READ_FILE_OPS(reply_tx_error);
DEBUGFS_WRITE_FILE_OPS(echo_test);
+#ifdef CONFIG_IWLWIFI_DEBUG
DEBUGFS_READ_WRITE_FILE_OPS(log_event);
+#endif
DEBUGFS_READ_WRITE_FILE_OPS(calib_disabled);
/*
DEBUGFS_ADD_FILE(rxon_flags, dir_debug, S_IWUSR);
DEBUGFS_ADD_FILE(rxon_filter_flags, dir_debug, S_IWUSR);
DEBUGFS_ADD_FILE(echo_test, dir_debug, S_IWUSR);
+#ifdef CONFIG_IWLWIFI_DEBUG
DEBUGFS_ADD_FILE(log_event, dir_debug, S_IWUSR | S_IRUSR);
+#endif
if (iwl_advanced_bt_coexist(priv))
DEBUGFS_ADD_FILE(bt_traffic, dir_debug, S_IRUSR);
/* We have our copies now, allow OS release its copies */
release_firmware(ucode_raw);
- complete(&drv->request_firmware_complete);
drv->op_mode = iwl_dvm_ops.start(drv->trans, drv->cfg, &drv->fw);
if (!drv->op_mode)
- goto out_free_fw;
+ goto out_unbind;
+ /*
+ * Complete the firmware request last so that
+ * a driver unbind (stop) doesn't run while we
+ * are doing the start() above.
+ */
+ complete(&drv->request_firmware_complete);
return;
try_again:
* iwl_get_max_txpower_avg - get the highest tx power from all chains.
* find the highest tx power from all chains for the channel
*/
-static s8 iwl_get_max_txpower_avg(const struct iwl_cfg *cfg,
+static s8 iwl_get_max_txpower_avg(struct iwl_priv *priv,
struct iwl_eeprom_enhanced_txpwr *enhanced_txpower,
int element, s8 *max_txpower_in_half_dbm)
{
s8 max_txpower_avg = 0; /* (dBm) */
/* Take the highest tx power from any valid chains */
- if ((cfg->valid_tx_ant & ANT_A) &&
+ if ((priv->hw_params.valid_tx_ant & ANT_A) &&
(enhanced_txpower[element].chain_a_max > max_txpower_avg))
max_txpower_avg = enhanced_txpower[element].chain_a_max;
- if ((cfg->valid_tx_ant & ANT_B) &&
+ if ((priv->hw_params.valid_tx_ant & ANT_B) &&
(enhanced_txpower[element].chain_b_max > max_txpower_avg))
max_txpower_avg = enhanced_txpower[element].chain_b_max;
- if ((cfg->valid_tx_ant & ANT_C) &&
+ if ((priv->hw_params.valid_tx_ant & ANT_C) &&
(enhanced_txpower[element].chain_c_max > max_txpower_avg))
max_txpower_avg = enhanced_txpower[element].chain_c_max;
- if (((cfg->valid_tx_ant == ANT_AB) |
- (cfg->valid_tx_ant == ANT_BC) |
- (cfg->valid_tx_ant == ANT_AC)) &&
+ if (((priv->hw_params.valid_tx_ant == ANT_AB) |
+ (priv->hw_params.valid_tx_ant == ANT_BC) |
+ (priv->hw_params.valid_tx_ant == ANT_AC)) &&
(enhanced_txpower[element].mimo2_max > max_txpower_avg))
max_txpower_avg = enhanced_txpower[element].mimo2_max;
- if ((cfg->valid_tx_ant == ANT_ABC) &&
+ if ((priv->hw_params.valid_tx_ant == ANT_ABC) &&
(enhanced_txpower[element].mimo3_max > max_txpower_avg))
max_txpower_avg = enhanced_txpower[element].mimo3_max;
((txp->delta_20_in_40 & 0xf0) >> 4),
(txp->delta_20_in_40 & 0x0f));
- max_txp_avg = iwl_get_max_txpower_avg(priv->cfg, txp_array, idx,
+ max_txp_avg = iwl_get_max_txpower_avg(priv, txp_array, idx,
&max_txp_avg_halfdbm);
/*
WIPHY_FLAG_DISABLE_BEACON_HINTS |
WIPHY_FLAG_IBSS_RSN;
+#ifdef CONFIG_PM_SLEEP
if (priv->fw->img[IWL_UCODE_WOWLAN].sec[0].len &&
priv->trans->ops->wowlan_suspend &&
device_can_wakeup(priv->trans->dev)) {
hw->wiphy->wowlan.pattern_max_len =
IWLAGN_WOWLAN_MAX_PATTERN_LEN;
}
+#endif
if (iwlwifi_mod_params.power_save)
hw->wiphy->flags |= WIPHY_FLAG_PS_ON_BY_DEFAULT;
ret = ieee80211_register_hw(priv->hw);
if (ret) {
IWL_ERR(priv, "Failed to register hw (error %d)\n", ret);
+ iwl_leds_exit(priv);
return ret;
}
priv->mac80211_registered = 1;
switch (op) {
case ADD:
ret = iwlagn_mac_sta_add(hw, vif, sta);
+ if (ret)
+ break;
+ /*
+ * Clear the in-progress flag, the AP station entry was added
+ * but we'll initialize LQ only when we've associated (which
+ * would also clear the in-progress flag). This is necessary
+ * in case we never initialize LQ because association fails.
+ */
+ spin_lock_bh(&priv->sta_lock);
+ priv->stations[iwl_sta_id(sta)].used &=
+ ~IWL_STA_UCODE_INPROGRESS;
+ spin_unlock_bh(&priv->sta_lock);
break;
case REMOVE:
ret = iwlagn_mac_sta_remove(hw, vif, sta);
#define SCD_TXFACT (SCD_BASE + 0x10)
#define SCD_ACTIVE (SCD_BASE + 0x14)
#define SCD_QUEUECHAIN_SEL (SCD_BASE + 0xe8)
+#define SCD_CHAINEXT_EN (SCD_BASE + 0x244)
#define SCD_AGGR_SEL (SCD_BASE + 0x248)
#define SCD_INTERRUPT_MASK (SCD_BASE + 0x108)
iwl_write_prph(trans, SCD_DRAM_BASE_ADDR,
trans_pcie->scd_bc_tbls.dma >> 10);
+ /* The chain extension of the SCD doesn't work well. This feature is
+ * enabled by default by the HW, so we need to disable it manually.
+ */
+ iwl_write_prph(trans, SCD_CHAINEXT_EN, 0);
+
/* Enable DMA channel */
for (chan = 0; chan < FH_TCSR_CHNL_NUM ; chan++)
iwl_write_direct32(trans, FH_TCSR_CHNL_TX_CONFIG_REG(chan),
hdr = (struct ieee80211_hdr *) skb->data;
mac80211_hwsim_monitor_ack(data2->hw, hdr->addr2);
}
+ txi->flags |= IEEE80211_TX_STAT_ACK;
}
ieee80211_tx_status_irqsafe(data2->hw, skb);
return 0;
"unregister family %i\n", ret);
}
+static const struct ieee80211_iface_limit hwsim_if_limits[] = {
+ { .max = 1, .types = BIT(NL80211_IFTYPE_ADHOC) },
+ { .max = 2048, .types = BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_P2P_CLIENT) |
+#ifdef CONFIG_MAC80211_MESH
+ BIT(NL80211_IFTYPE_MESH_POINT) |
+#endif
+ BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_P2P_GO) },
+};
+
+static const struct ieee80211_iface_combination hwsim_if_comb = {
+ .limits = hwsim_if_limits,
+ .n_limits = ARRAY_SIZE(hwsim_if_limits),
+ .max_interfaces = 2048,
+ .num_different_channels = 1,
+};
+
static int __init init_mac80211_hwsim(void)
{
int i, err = 0;
hw->wiphy->n_addresses = 2;
hw->wiphy->addresses = data->addresses;
+ hw->wiphy->iface_combinations = &hwsim_if_comb;
+ hw->wiphy->n_iface_combinations = 1;
+
if (fake_hw_scan) {
hw->wiphy->max_scan_ssids = 255;
hw->wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN;
else
last_seq = priv->rx_seq[tid];
- if (last_seq >= new_node->start_win)
+ if (last_seq != MWIFIEX_DEF_11N_RX_SEQ_NUM &&
+ last_seq >= new_node->start_win)
new_node->start_win = last_seq + 1;
new_node->win_size = win_size;
spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags);
INIT_LIST_HEAD(&priv->rx_reorder_tbl_ptr);
- memset(priv->rx_seq, 0, sizeof(priv->rx_seq));
+ mwifiex_reset_11n_rx_seq_num(priv);
}
#define ADDBA_RSP_STATUS_ACCEPT 0
+#define MWIFIEX_DEF_11N_RX_SEQ_NUM 0xffff
+
+static inline void mwifiex_reset_11n_rx_seq_num(struct mwifiex_private *priv)
+{
+ memset(priv->rx_seq, 0xff, sizeof(priv->rx_seq));
+}
+
int mwifiex_11n_rx_reorder_pkt(struct mwifiex_private *,
u16 seqNum,
u16 tid, u8 *ta,
bss_cfg->ssid.ssid_len = params->ssid_len;
}
+ switch (params->hidden_ssid) {
+ case NL80211_HIDDEN_SSID_NOT_IN_USE:
+ bss_cfg->bcast_ssid_ctl = 1;
+ break;
+ case NL80211_HIDDEN_SSID_ZERO_LEN:
+ bss_cfg->bcast_ssid_ctl = 0;
+ break;
+ case NL80211_HIDDEN_SSID_ZERO_CONTENTS:
+ /* firmware doesn't support this type of hidden SSID */
+ default:
+ kfree(bss_cfg);
+ return -EINVAL;
+ }
+
if (mwifiex_set_secure_params(priv, bss_cfg, params)) {
kfree(bss_cfg);
wiphy_err(wiphy, "Failed to parse secuirty parameters!\n");
struct wireless_dev *wdev;
if (!adapter)
- return NULL;
+ return ERR_PTR(-EFAULT);
switch (type) {
case NL80211_IFTYPE_UNSPECIFIED:
if (priv->bss_mode) {
wiphy_err(wiphy,
"cannot create multiple sta/adhoc ifaces\n");
- return NULL;
+ return ERR_PTR(-EINVAL);
}
wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL);
if (!wdev)
- return NULL;
+ return ERR_PTR(-ENOMEM);
wdev->wiphy = wiphy;
priv->wdev = wdev;
if (priv->bss_mode) {
wiphy_err(wiphy, "Can't create multiple AP interfaces");
- return NULL;
+ return ERR_PTR(-EINVAL);
}
wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL);
if (!wdev)
- return NULL;
+ return ERR_PTR(-ENOMEM);
priv->wdev = wdev;
wdev->wiphy = wiphy;
break;
default:
wiphy_err(wiphy, "type not supported\n");
- return NULL;
+ return ERR_PTR(-EINVAL);
}
dev = alloc_netdev_mq(sizeof(struct mwifiex_private *), name,
ether_setup, 1);
if (!dev) {
wiphy_err(wiphy, "no memory available for netdevice\n");
- goto error;
+ priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED;
+ return ERR_PTR(-ENOMEM);
}
mwifiex_init_priv_params(priv, dev);
/* Register network device */
if (register_netdevice(dev)) {
wiphy_err(wiphy, "cannot register virtual network device\n");
- goto error;
+ free_netdev(dev);
+ priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED;
+ return ERR_PTR(-EFAULT);
}
sema_init(&priv->async_sem, 1);
mwifiex_dev_debugfs_init(priv);
#endif
return dev;
-error:
- if (dev && (dev->reg_state == NETREG_UNREGISTERED))
- free_netdev(dev);
- priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED;
-
- return NULL;
}
EXPORT_SYMBOL_GPL(mwifiex_add_virtual_intf);
#define TLV_TYPE_CHANNELBANDLIST (PROPRIETARY_TLV_BASE_ID + 42)
#define TLV_TYPE_UAP_BEACON_PERIOD (PROPRIETARY_TLV_BASE_ID + 44)
#define TLV_TYPE_UAP_DTIM_PERIOD (PROPRIETARY_TLV_BASE_ID + 45)
+#define TLV_TYPE_UAP_BCAST_SSID (PROPRIETARY_TLV_BASE_ID + 48)
#define TLV_TYPE_UAP_RTS_THRESHOLD (PROPRIETARY_TLV_BASE_ID + 51)
#define TLV_TYPE_UAP_WPA_PASSPHRASE (PROPRIETARY_TLV_BASE_ID + 60)
#define TLV_TYPE_UAP_ENCRY_PROTOCOL (PROPRIETARY_TLV_BASE_ID + 64)
u8 ssid[0];
} __packed;
+struct host_cmd_tlv_bcast_ssid {
+ struct host_cmd_tlv tlv;
+ u8 bcast_ctl;
+} __packed;
+
struct host_cmd_tlv_beacon_period {
struct host_cmd_tlv tlv;
__le16 period;
/* save assoc resp ie index after auto-indexing */
*assoc_idx = *((u16 *)pos);
+ kfree(ap_custom_ie);
return ret;
}
dev_dbg(adapter->dev, "info: --- Rx: Event ---\n");
adapter->event_cause = *(u32 *) skb->data;
- skb_pull(skb, MWIFIEX_EVENT_HEADER_LEN);
-
if ((skb->len > 0) && (skb->len < MAX_EVENT_SIZE))
- memcpy(adapter->event_body, skb->data, skb->len);
+ memcpy(adapter->event_body,
+ skb->data + MWIFIEX_EVENT_HEADER_LEN,
+ skb->len);
/* event cause has been saved to adapter->event_cause */
adapter->event_received = true;
break;
case EVENT_UAP_STA_ASSOC:
- skb_pull(adapter->event_skb, MWIFIEX_UAP_EVENT_EXTRA_HEADER);
memset(&sinfo, 0, sizeof(sinfo));
- event = (struct mwifiex_assoc_event *)adapter->event_skb->data;
+ event = (struct mwifiex_assoc_event *)
+ (adapter->event_body + MWIFIEX_UAP_EVENT_EXTRA_HEADER);
if (le16_to_cpu(event->type) == TLV_TYPE_UAP_MGMT_FRAME) {
len = -1;
GFP_KERNEL);
break;
case EVENT_UAP_STA_DEAUTH:
- skb_pull(adapter->event_skb, MWIFIEX_UAP_EVENT_EXTRA_HEADER);
- cfg80211_del_sta(priv->netdev, adapter->event_skb->data,
- GFP_KERNEL);
+ cfg80211_del_sta(priv->netdev, adapter->event_body +
+ MWIFIEX_UAP_EVENT_EXTRA_HEADER, GFP_KERNEL);
break;
case EVENT_UAP_BSS_IDLE:
priv->media_connected = false;
goto done;
for (i = 0; i < adapter->priv_num; i++) {
-
tpriv = adapter->priv[i];
- if ((GET_BSS_ROLE(tpriv) == MWIFIEX_BSS_ROLE_STA) &&
- (tpriv->media_connected)) {
- if (netif_queue_stopped(tpriv->netdev))
- mwifiex_wake_up_net_dev_queue(tpriv->netdev,
- adapter);
- }
+ if (tpriv->media_connected &&
+ netif_queue_stopped(tpriv->netdev))
+ mwifiex_wake_up_net_dev_queue(tpriv->netdev, adapter);
}
done:
dev_kfree_skb_any(skb);
struct cfg80211_ap_settings *params) {
int i;
+ if (!params->privacy) {
+ bss_config->protocol = PROTOCOL_NO_SECURITY;
+ bss_config->key_mgmt = KEY_MGMT_NONE;
+ bss_config->wpa_cfg.length = 0;
+ priv->sec_info.wep_enabled = 0;
+ priv->sec_info.wpa_enabled = 0;
+ priv->sec_info.wpa2_enabled = 0;
+
+ return 0;
+ }
+
switch (params->auth_type) {
case NL80211_AUTHTYPE_OPEN_SYSTEM:
bss_config->auth_mode = WLAN_AUTH_OPEN;
struct host_cmd_tlv_dtim_period *dtim_period;
struct host_cmd_tlv_beacon_period *beacon_period;
struct host_cmd_tlv_ssid *ssid;
+ struct host_cmd_tlv_bcast_ssid *bcast_ssid;
struct host_cmd_tlv_channel_band *chan_band;
struct host_cmd_tlv_frag_threshold *frag_threshold;
struct host_cmd_tlv_rts_threshold *rts_threshold;
cmd_size += sizeof(struct host_cmd_tlv) +
bss_cfg->ssid.ssid_len;
tlv += sizeof(struct host_cmd_tlv) + bss_cfg->ssid.ssid_len;
+
+ bcast_ssid = (struct host_cmd_tlv_bcast_ssid *)tlv;
+ bcast_ssid->tlv.type = cpu_to_le16(TLV_TYPE_UAP_BCAST_SSID);
+ bcast_ssid->tlv.len =
+ cpu_to_le16(sizeof(bcast_ssid->bcast_ctl));
+ bcast_ssid->bcast_ctl = bss_cfg->bcast_ssid_ctl;
+ cmd_size += sizeof(struct host_cmd_tlv_bcast_ssid);
+ tlv += sizeof(struct host_cmd_tlv_bcast_ssid);
}
if (bss_cfg->channel && bss_cfg->channel <= MAX_CHANNEL_BAND_BG) {
chan_band = (struct host_cmd_tlv_channel_band *)tlv;
if (!bss_cfg)
return -ENOMEM;
+ mwifiex_set_sys_config_invalid_data(bss_cfg);
bss_cfg->band_cfg = BAND_CONFIG_MANUAL;
bss_cfg->channel = channel;
struct device *dev = adapter->dev;
u32 recv_type;
__le32 tmp;
+ int ret;
if (adapter->hs_activated)
mwifiex_process_hs_config(adapter);
case MWIFIEX_USB_TYPE_CMD:
if (skb->len > MWIFIEX_SIZE_OF_CMD_BUFFER) {
dev_err(dev, "CMD: skb->len too large\n");
- return -1;
+ ret = -1;
+ goto exit_restore_skb;
} else if (!adapter->curr_cmd) {
dev_dbg(dev, "CMD: no curr_cmd\n");
if (adapter->ps_state == PS_STATE_SLEEP_CFM) {
mwifiex_process_sleep_confirm_resp(
adapter, skb->data,
skb->len);
- return 0;
+ ret = 0;
+ goto exit_restore_skb;
}
- return -1;
+ ret = -1;
+ goto exit_restore_skb;
}
adapter->curr_cmd->resp_skb = skb;
case MWIFIEX_USB_TYPE_EVENT:
if (skb->len < sizeof(u32)) {
dev_err(dev, "EVENT: skb->len too small\n");
- return -1;
+ ret = -1;
+ goto exit_restore_skb;
}
skb_copy_from_linear_data(skb, &tmp, sizeof(u32));
adapter->event_cause = le32_to_cpu(tmp);
- skb_pull(skb, sizeof(u32));
dev_dbg(dev, "event_cause %#x\n", adapter->event_cause);
if (skb->len > MAX_EVENT_SIZE) {
dev_err(dev, "EVENT: event body too large\n");
- return -1;
+ ret = -1;
+ goto exit_restore_skb;
}
- skb_copy_from_linear_data(skb, adapter->event_body,
- skb->len);
+ memcpy(adapter->event_body, skb->data +
+ MWIFIEX_EVENT_HEADER_LEN, skb->len);
+
adapter->event_received = true;
adapter->event_skb = skb;
break;
}
return -EINPROGRESS;
+
+exit_restore_skb:
+ /* The buffer will be reused for further cmds/events */
+ skb_push(skb, INTF_HEADER_LEN);
+
+ return ret;
}
static void mwifiex_usb_rx_complete(struct urb *urb)
priv->add_ba_param.tx_win_size = MWIFIEX_AMPDU_DEF_TXWINSIZE;
priv->add_ba_param.rx_win_size = MWIFIEX_AMPDU_DEF_RXWINSIZE;
+ mwifiex_reset_11n_rx_seq_num(priv);
+
atomic_set(&priv->wmm.tx_pkts_queued, 0);
atomic_set(&priv->wmm.highest_queued_prio, HIGH_PRIO_TID);
}
if (!ptr->is_11n_enabled ||
mwifiex_is_ba_stream_setup(priv, ptr, tid) ||
+ priv->wps.session_enable ||
((priv->sec_info.wpa_enabled ||
priv->sec_info.wpa2_enabled) &&
!priv->wpa_is_gtk_set)) {
while (check_bssid_list_item(bssid, bssid_len, buf, len)) {
if (rndis_bss_info_update(usbdev, bssid) && match_bssid &&
matched) {
- if (!ether_addr_equal(bssid->mac, match_bssid))
+ if (ether_addr_equal(bssid->mac, match_bssid))
*matched = true;
}
* for hardware which doesn't support hardware
* sequence counting.
*/
- spinlock_t seqlock;
- u16 seqno;
+ atomic_t seqno;
};
static inline struct rt2x00_intf* vif_to_intf(struct ieee80211_vif *vif)
else
rt2x00dev->intf_sta_count++;
- spin_lock_init(&intf->seqlock);
mutex_init(&intf->beacon_skb_mutex);
intf->beacon = entry;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif);
+ u16 seqno;
if (!(tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ))
return;
* sequence counting per-frame, since those will override the
* sequence counter given by mac80211.
*/
- spin_lock(&intf->seqlock);
-
if (test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags))
- intf->seqno += 0x10;
- hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
- hdr->seq_ctrl |= cpu_to_le16(intf->seqno);
-
- spin_unlock(&intf->seqlock);
+ seqno = atomic_add_return(0x10, &intf->seqno);
+ else
+ seqno = atomic_read(&intf->seqno);
+ hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+ hdr->seq_ctrl |= cpu_to_le16(seqno);
}
static void rt2x00queue_create_tx_descriptor_plcp(struct rt2x00_dev *rt2x00dev,
case QID_RX:
if (!rt2x00queue_full(queue))
rt2x00queue_for_each_entry(queue,
- Q_INDEX_DONE,
Q_INDEX,
+ Q_INDEX_DONE,
NULL,
rt2x00usb_kick_rx_entry);
break;
radio_on = true;
} else if (radio_on) {
radio_on = false;
- cancel_delayed_work_sync(&priv->led_on);
+ cancel_delayed_work(&priv->led_on);
ieee80211_queue_delayed_work(hw, &priv->led_off, 0);
}
} else if (radio_on) {
{RTL_USB_DEVICE(0x07b8, 0x8188, rtl92cu_hal_cfg)}, /*Abocom - Abocom*/
{RTL_USB_DEVICE(0x07b8, 0x8189, rtl92cu_hal_cfg)}, /*Funai - Abocom*/
{RTL_USB_DEVICE(0x0846, 0x9041, rtl92cu_hal_cfg)}, /*NetGear WNA1000M*/
+ {RTL_USB_DEVICE(0x0bda, 0x5088, rtl92cu_hal_cfg)}, /*Thinkware-CC&C*/
{RTL_USB_DEVICE(0x0df6, 0x0052, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/
{RTL_USB_DEVICE(0x0df6, 0x005c, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/
{RTL_USB_DEVICE(0x0eb0, 0x9071, rtl92cu_hal_cfg)}, /*NO Brand - Etop*/
+ {RTL_USB_DEVICE(0x4856, 0x0091, rtl92cu_hal_cfg)}, /*NetweeN - Feixun*/
/* HP - Lite-On ,8188CUS Slim Combo */
{RTL_USB_DEVICE(0x103c, 0x1629, rtl92cu_hal_cfg)},
{RTL_USB_DEVICE(0x13d3, 0x3357, rtl92cu_hal_cfg)}, /* AzureWave */
{RTL_USB_DEVICE(0x07b8, 0x8178, rtl92cu_hal_cfg)}, /*Funai -Abocom*/
{RTL_USB_DEVICE(0x0846, 0x9021, rtl92cu_hal_cfg)}, /*Netgear-Sercomm*/
{RTL_USB_DEVICE(0x0b05, 0x17ab, rtl92cu_hal_cfg)}, /*ASUS-Edimax*/
+ {RTL_USB_DEVICE(0x0bda, 0x8186, rtl92cu_hal_cfg)}, /*Realtek 92CE-VAU*/
{RTL_USB_DEVICE(0x0df6, 0x0061, rtl92cu_hal_cfg)}, /*Sitecom-Edimax*/
{RTL_USB_DEVICE(0x0e66, 0x0019, rtl92cu_hal_cfg)}, /*Hawking-Edimax*/
{RTL_USB_DEVICE(0x2001, 0x3307, rtl92cu_hal_cfg)}, /*D-Link-Cameo*/
}
*mactime = tsf_info->current_tsf_lsb |
- (tsf_info->current_tsf_msb << 31);
+ ((u64)tsf_info->current_tsf_msb << 32);
out:
kfree(tsf_info);
}
}
- if (vector & SYNCHRONIZATION_TIMEOUT_EVENT_ID &&
- wl->station_mode != STATION_ACTIVE_MODE) {
+ if (vector & SYNCHRONIZATION_TIMEOUT_EVENT_ID) {
wl1251_debug(DEBUG_EVENT, "SYNCHRONIZATION_TIMEOUT_EVENT");
/* indicate to the stack, that beacons have been lost */
spi_sync(wl_to_spi(wl), &m);
wl1251_dump(DEBUG_SPI, "spi reset -> ", cmd, WSPI_INIT_CMD_LEN);
+
+ kfree(cmd);
}
static void wl1251_spi_wake(struct wl1251 *wl)
spi_sync(wl_to_spi(wl), &m);
wl1251_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN);
+
+ kfree(cmd);
}
static void wl1251_spi_reset_wake(struct wl1251 *wl)
config WLCORE
tristate "TI wlcore support"
depends on WL_TI && GENERIC_HARDIRQS && MAC80211
- depends on INET
select FW_LOADER
---help---
This module contains the main code for TI WLAN chips. It abstracts
dev_dbg(&dev->dev, "%s\n", dev->nodename);
- unregister_netdev(info->netdev);
-
xennet_disconnect_backend(info);
- del_timer_sync(&info->rx_refill_timer);
-
xennet_sysfs_delif(info->netdev);
+ unregister_netdev(info->netdev);
+
+ del_timer_sync(&info->rx_refill_timer);
+
free_percpu(info->stats);
free_netdev(info->netdev);
for(; lookup->compatible != NULL; lookup++) {
if (!of_device_is_compatible(np, lookup->compatible))
continue;
- if (of_address_to_resource(np, 0, &res))
- continue;
- if (res.start != lookup->phys_addr)
- continue;
+ if (!of_address_to_resource(np, 0, &res))
+ if (res.start != lookup->phys_addr)
+ continue;
pr_debug("%s: devname=%s\n", np->full_name, lookup->name);
return lookup;
}
of_node_put(root);
return rc;
}
+EXPORT_SYMBOL_GPL(of_platform_populate);
#endif /* CONFIG_OF_ADDRESS */
static DEFINE_MUTEX(oprofile_perf_mutex);
static struct op_counter_config *counter_config;
-static struct perf_event **perf_events[nr_cpumask_bits];
+static struct perf_event **perf_events[NR_CPUS];
static int num_counters;
/*
pci_pm_set_unknown_state(pci_dev);
+ /*
+ * Some BIOSes from ASUS have a bug: If a USB EHCI host controller's
+ * PCI COMMAND register isn't 0, the BIOS assumes that the controller
+ * hasn't been quiesced and tries to turn it off. If the controller
+ * is already in D3, this can hang or cause memory corruption.
+ *
+ * Since the value of the COMMAND register doesn't matter once the
+ * device has been suspended, we can safely set it to 0 here.
+ */
+ if (pci_dev->class == PCI_CLASS_SERIAL_USB_EHCI)
+ pci_write_config_word(pci_dev, PCI_COMMAND, 0);
+
return 0;
}
list_for_each_entry(_maps_node_, &pinctrl_maps, node) \
for (_i_ = 0, _map_ = &_maps_node_->maps[_i_]; \
_i_ < _maps_node_->num_maps; \
- i++, _map_ = &_maps_node_->maps[_i_])
+ _i_++, _map_ = &_maps_node_->maps[_i_])
/**
* pinctrl_provide_dummies() - indicate if pinctrl provides dummy state support
#include "core.h"
#include "pinctrl-imx.h"
-#define IMX_PMX_DUMP(info, p, m, c, n) \
-{ \
- int i, j; \
- printk("Format: Pin Mux Config\n"); \
- for (i = 0; i < n; i++) { \
- j = p[i]; \
- printk("%s %d 0x%lx\n", \
- info->pins[j].name, \
- m[i], c[i]); \
- } \
+#define IMX_PMX_DUMP(info, p, m, c, n) \
+{ \
+ int i, j; \
+ printk(KERN_DEBUG "Format: Pin Mux Config\n"); \
+ for (i = 0; i < n; i++) { \
+ j = p[i]; \
+ printk(KERN_DEBUG "%s %d 0x%lx\n", \
+ info->pins[j].name, \
+ m[i], c[i]); \
+ } \
}
/* The bits in CONFIG cell defined in binding doc*/
/* create mux map */
parent = of_get_parent(np);
- if (!parent)
+ if (!parent) {
+ kfree(new_map);
return -EINVAL;
+ }
new_map[0].type = PIN_MAP_TYPE_MUX_GROUP;
new_map[0].data.mux.function = parent->name;
new_map[0].data.mux.group = np->name;
}
dev_dbg(pctldev->dev, "maps: function %s group %s num %d\n",
- new_map->data.mux.function, new_map->data.mux.group, map_num);
+ (*map)->data.mux.function, (*map)->data.mux.group, map_num);
return 0;
}
static void imx_dt_free_map(struct pinctrl_dev *pctldev,
struct pinctrl_map *map, unsigned num_maps)
{
- int i;
-
- for (i = 0; i < num_maps; i++)
- kfree(map);
+ kfree(map);
}
static struct pinctrl_ops imx_pctrl_ops = {
#ifdef DEBUG
IMX_PMX_DUMP(info, grp->pins, grp->mux_mode, grp->configs, grp->npins);
#endif
+
return 0;
}
IMX_PIN_REG(MX6Q_PAD_SD2_DAT3, 0x0744, 0x035C, 5, 0x0000, 0), /* MX6Q_PAD_SD2_DAT3__GPIO_1_12 */
IMX_PIN_REG(MX6Q_PAD_SD2_DAT3, 0x0744, 0x035C, 6, 0x0000, 0), /* MX6Q_PAD_SD2_DAT3__SJC_DONE */
IMX_PIN_REG(MX6Q_PAD_SD2_DAT3, 0x0744, 0x035C, 7, 0x0000, 0), /* MX6Q_PAD_SD2_DAT3__ANATOP_TESTO_3 */
+ IMX_PIN_REG(MX6Q_PAD_ENET_RX_ER, 0x04EC, 0x01D8, 0, 0x0000, 0), /* MX6Q_PAD_ENET_RX_ER__ANATOP_USBOTG_ID */
+ IMX_PIN_REG(MX6Q_PAD_GPIO_1, 0x05F4, 0x0224, 3, 0x0000, 0), /* MX6Q_PAD_GPIO_1__ANATOP_USBOTG_ID */
};
/* Pad names for the pinmux subsystem */
/* Compose group name */
group = kzalloc(length, GFP_KERNEL);
- if (!group)
- return -ENOMEM;
+ if (!group) {
+ ret = -ENOMEM;
+ goto free;
+ }
snprintf(group, length, "%s.%d", np->name, reg);
new_map[i].data.mux.group = group;
i++;
pconfig = kmemdup(&config, sizeof(config), GFP_KERNEL);
if (!pconfig) {
ret = -ENOMEM;
- goto free;
+ goto free_group;
}
new_map[i].type = PIN_MAP_TYPE_CONFIGS_GROUP;
return 0;
+free_group:
+ if (!purecfg)
+ kfree(group);
free:
kfree(new_map);
return ret;
return 0;
err:
+ platform_set_drvdata(pdev, NULL);
iounmap(d->base);
return ret;
}
{
struct mxs_pinctrl_data *d = platform_get_drvdata(pdev);
+ platform_set_drvdata(pdev, NULL);
pinctrl_unregister(d->pctl);
iounmap(d->base);
* wakeup is anyhow controlled by the RIMSC and FIMSC registers.
*/
if (nmk_chip->sleepmode && on) {
- __nmk_gpio_set_slpm(nmk_chip, gpio % nmk_chip->chip.base,
+ __nmk_gpio_set_slpm(nmk_chip, gpio % NMK_GPIO_PER_CHIP,
NMK_GPIO_SLPM_WAKEUP_ENABLE);
}
ret = PTR_ERR(clk);
goto out_unmap;
}
+ clk_prepare(clk);
nmk_chip = kzalloc(sizeof(*nmk_chip), GFP_KERNEL);
if (!nmk_chip) {
dev_dbg(npct->dev, "enable group %s, %u pins\n", g->name, g->npins);
- /* Handle this special glitch on altfunction C */
+ /*
+ * If we're setting altfunc C by setting both AFSLA and AFSLB to 1,
+ * we may pass through an undesired state. In this case we take
+ * some extra care.
+ *
+ * Safe sequence used to switch IOs between GPIO and Alternate-C mode:
+ * - Save SLPM registers (since we have a shadow register in the
+ * nmk_chip we're using that as backup)
+ * - Set SLPM=0 for the IOs you want to switch and others to 1
+ * - Configure the GPIO registers for the IOs that are being switched
+ * - Set IOFORCE=1
+ * - Modify the AFLSA/B registers for the IOs that are being switched
+ * - Set IOFORCE=0
+ * - Restore SLPM registers
+ * - Any spurious wake up event during switch sequence to be ignored
+ * and cleared
+ *
+ * We REALLY need to save ALL slpm registers, because the external
+ * IOFORCE will switch *all* ports to their sleepmode setting to as
+ * to avoid glitches. (Not just one port!)
+ */
glitch = (g->altsetting == NMK_GPIO_ALT_C);
if (glitch) {
return ret;
}
-static const struct of_device_id pinmux_ids[] = {
+static const struct of_device_id pinmux_ids[] __devinitconst = {
{ .compatible = "sirf,prima2-gpio-pinmux" },
{}
};
* Driver for the ST Microelectronics SPEAr pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* Inspired from:
* - U300 Pinctl drivers
* Driver header file for the ST Microelectronics SPEAr pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* Driver for the ST Microelectronics SPEAr1310 pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
}
module_exit(spear1310_pinctrl_exit);
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_DESCRIPTION("ST Microelectronics SPEAr1310 pinctrl driver");
MODULE_LICENSE("GPL v2");
MODULE_DEVICE_TABLE(of, spear1310_pinctrl_of_match);
* Driver for the ST Microelectronics SPEAr1340 pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
}
module_exit(spear1340_pinctrl_exit);
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_DESCRIPTION("ST Microelectronics SPEAr1340 pinctrl driver");
MODULE_LICENSE("GPL v2");
MODULE_DEVICE_TABLE(of, spear1340_pinctrl_of_match);
* Driver for the ST Microelectronics SPEAr300 pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
}
module_exit(spear300_pinctrl_exit);
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_DESCRIPTION("ST Microelectronics SPEAr300 pinctrl driver");
MODULE_LICENSE("GPL v2");
MODULE_DEVICE_TABLE(of, spear300_pinctrl_of_match);
* Driver for the ST Microelectronics SPEAr310 pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
}
module_exit(spear310_pinctrl_exit);
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_DESCRIPTION("ST Microelectronics SPEAr310 pinctrl driver");
MODULE_LICENSE("GPL v2");
MODULE_DEVICE_TABLE(of, SPEAr310_pinctrl_of_match);
* Driver for the ST Microelectronics SPEAr320 pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
}
module_exit(spear320_pinctrl_exit);
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_DESCRIPTION("ST Microelectronics SPEAr320 pinctrl driver");
MODULE_LICENSE("GPL v2");
MODULE_DEVICE_TABLE(of, spear320_pinctrl_of_match);
* Driver for the ST Microelectronics SPEAr3xx pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* Header file for the ST Microelectronics SPEAr3xx pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
*
* (C) 2009 - Peter Feuerer peter (a) piie.net
* http://piie.net
- * 2009 Borislav Petkov <petkovbb@gmail.com>
+ * 2009 Borislav Petkov bp (a) alien8.de
*
* Inspired by and many thanks to:
* o acerfand - Rachel Greenham
if (IS_ERR(cl_dev))
return -EINVAL;
- thz_dev = thermal_zone_device_register("acerhdf", 1, NULL,
+ thz_dev = thermal_zone_device_register("acerhdf", 1, 0, NULL,
&acerhdf_dev_ops, 0, 0, 0,
(kernelmode) ? interval*1000 : 0);
if (IS_ERR(thz_dev))
static int __devinit ideapad_acpi_add(struct acpi_device *adevice)
{
int ret, i;
- unsigned long cfg;
+ int cfg;
struct ideapad_private *priv;
- if (read_method_int(adevice->handle, "_CFG", (int *)&cfg))
+ if (read_method_int(adevice->handle, "_CFG", &cfg))
return -ENODEV;
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
goto input_failed;
for (i = 0; i < IDEAPAD_RFKILL_DEV_NUM; i++) {
- if (test_bit(ideapad_rfk_data[i].cfgbit, &cfg))
+ if (test_bit(ideapad_rfk_data[i].cfgbit, &priv->cfg))
ideapad_register_rfkill(adevice, i);
else
priv->rfk[i] = NULL;
#include <linux/string.h>
#include <linux/tick.h>
#include <linux/timer.h>
+#include <linux/dmi.h>
#include <drm/i915_drm.h>
#include <asm/msr.h>
#include <asm/processor.h>
MODULE_DEVICE_TABLE(pci, ips_id_table);
+static int ips_blacklist_callback(const struct dmi_system_id *id)
+{
+ pr_info("Blacklisted intel_ips for %s\n", id->ident);
+ return 1;
+}
+
+static const struct dmi_system_id ips_blacklist[] = {
+ {
+ .callback = ips_blacklist_callback,
+ .ident = "HP ProBook",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP ProBook"),
+ },
+ },
+ { } /* terminating entry */
+};
+
static int ips_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
u64 platform_info;
u16 htshi, trc, trc_required_mask;
u8 tse;
+ if (dmi_check_system(ips_blacklist))
+ return -ENODEV;
+
ips = kzalloc(sizeof(struct ips_driver), GFP_KERNEL);
if (!ips)
return -ENOMEM;
goto err;
}
pinfo->tzd[i] = thermal_zone_device_register(name[i],
- 0, td_info, &tzd_ops, 0, 0, 0, 0);
+ 0, 0, td_info, &tzd_ops, 0, 0, 0, 0);
if (IS_ERR(pinfo->tzd[i])) {
kfree(td_info);
ret = PTR_ERR(pinfo->tzd[i]);
struct device_attribute *attr,
const char *buffer, size_t count)
{
- unsigned long value = 0;
+ int value;
int ret = 0;
struct sony_nc_value *item =
container_of(attr, struct sony_nc_value, devattr);
if (count > 31)
return -EINVAL;
- if (kstrtoul(buffer, 10, &value))
+ if (kstrtoint(buffer, 10, &value))
return -EINVAL;
if (item->validate)
return value;
ret = sony_nc_int_call(sony_nc_acpi_handle, *item->acpiset,
- (int *)&value, NULL);
+ &value, NULL);
if (ret < 0)
return -EIO;
struct sony_backlight_props {
struct backlight_device *dev;
int handle;
+ int cmd_base;
u8 offset;
u8 maxlvl;
};
struct sony_backlight_props *sdev =
(struct sony_backlight_props *)bl_get_data(bd);
- sony_call_snc_handle(sdev->handle, 0x0200, &result);
+ sony_call_snc_handle(sdev->handle, sdev->cmd_base + 0x100, &result);
return (result & 0xff) - sdev->offset;
}
(struct sony_backlight_props *)bl_get_data(bd);
value = bd->props.brightness + sdev->offset;
- if (sony_call_snc_handle(sdev->handle, 0x0100 | (value << 16), &result))
+ if (sony_call_snc_handle(sdev->handle, sdev->cmd_base | (value << 0x10),
+ &result))
return -EIO;
return value;
/*
* ACPI callbacks
*/
+enum event_types {
+ HOTKEY = 1,
+ KILLSWITCH,
+ GFX_SWITCH
+};
static void sony_nc_notify(struct acpi_device *device, u32 event)
{
u32 real_ev = event;
/* hotkey event */
case 0x0100:
case 0x0127:
- ev_type = 1;
+ ev_type = HOTKEY;
real_ev = sony_nc_hotkeys_decode(event, handle);
if (real_ev > 0)
* update the rfkill device status when the
* switch is moved.
*/
- ev_type = 2;
+ ev_type = KILLSWITCH;
sony_call_snc_handle(handle, 0x0100, &result);
real_ev = result & 0x03;
break;
+ case 0x0128:
+ case 0x0146:
+ /* Hybrid GFX switching */
+ sony_call_snc_handle(handle, 0x0000, &result);
+ dprintk("GFX switch event received (reason: %s)\n",
+ (result & 0x01) ?
+ "switch change" : "unknown");
+
+ /* verify the switch state
+ * 1: discrete GFX
+ * 0: integrated GFX
+ */
+ sony_call_snc_handle(handle, 0x0100, &result);
+
+ ev_type = GFX_SWITCH;
+ real_ev = result & 0xff;
+ break;
+
default:
dprintk("Unknown event 0x%x for handle 0x%x\n",
event, handle);
} else {
/* old style event */
- ev_type = 1;
+ ev_type = HOTKEY;
sony_laptop_report_input_event(real_ev);
}
* bits 4,5: store the limit into the EC
* bits 6,7: store the limit into the battery
*/
+ cmd = 0;
- /*
- * handle 0x0115 should allow storing on battery too;
- * handle 0x0136 same as 0x0115 + health status;
- * handle 0x013f, same as 0x0136 but no storing on the battery
- *
- * Store only inside the EC for now, regardless the handle number
- */
- if (value == 0)
- /* disable limits */
- cmd = 0x0;
+ if (value > 0) {
+ if (value <= 50)
+ cmd = 0x20;
- else if (value <= 50)
- cmd = 0x21;
+ else if (value <= 80)
+ cmd = 0x10;
- else if (value <= 80)
- cmd = 0x11;
+ else if (value <= 100)
+ cmd = 0x30;
- else if (value <= 100)
- cmd = 0x31;
+ else
+ return -EINVAL;
- else
- return -EINVAL;
+ /*
+ * handle 0x0115 should allow storing on battery too;
+ * handle 0x0136 same as 0x0115 + health status;
+ * handle 0x013f, same as 0x0136 but no storing on the battery
+ */
+ if (bcare_ctl->handle != 0x013f)
+ cmd = cmd | (cmd << 2);
- if (sony_call_snc_handle(bcare_ctl->handle, (cmd << 0x10) | 0x0100,
- &result))
+ cmd = (cmd | 0x1) << 0x10;
+ }
+
+ if (sony_call_snc_handle(bcare_ctl->handle, cmd | 0x0100, &result))
return -EIO;
return count;
struct device_attribute *attr, char *buffer)
{
ssize_t count = 0;
- unsigned int mode = sony_nc_thermal_mode_get();
+ int mode = sony_nc_thermal_mode_get();
if (mode < 0)
return mode;
{
u64 offset;
int i;
+ int lvl_table_len = 0;
u8 min = 0xff, max = 0x00;
unsigned char buffer[32] = { 0 };
props->maxlvl = 0xff;
offset = sony_find_snc_handle(handle);
- if (offset < 0)
- return;
/* try to read the boundaries from ACPI tables, if we fail the above
* defaults should be reasonable
if (i < 0)
return;
+ switch (handle) {
+ case 0x012f:
+ case 0x0137:
+ lvl_table_len = 9;
+ break;
+ case 0x143:
+ lvl_table_len = 16;
+ break;
+ }
+
/* the buffer lists brightness levels available, brightness levels are
* from position 0 to 8 in the array, other values are used by ALS
* control.
*/
- for (i = 0; i < 9 && i < ARRAY_SIZE(buffer); i++) {
+ for (i = 0; i < lvl_table_len && i < ARRAY_SIZE(buffer); i++) {
dprintk("Brightness level: %d\n", buffer[i]);
const struct backlight_ops *ops = NULL;
struct backlight_properties props;
- if (sony_find_snc_handle(0x12f) != -1) {
+ if (sony_find_snc_handle(0x12f) >= 0) {
ops = &sony_backlight_ng_ops;
+ sony_bl_props.cmd_base = 0x0100;
sony_nc_backlight_ng_read_limits(0x12f, &sony_bl_props);
max_brightness = sony_bl_props.maxlvl - sony_bl_props.offset;
- } else if (sony_find_snc_handle(0x137) != -1) {
+ } else if (sony_find_snc_handle(0x137) >= 0) {
ops = &sony_backlight_ng_ops;
+ sony_bl_props.cmd_base = 0x0100;
sony_nc_backlight_ng_read_limits(0x137, &sony_bl_props);
max_brightness = sony_bl_props.maxlvl - sony_bl_props.offset;
+ } else if (sony_find_snc_handle(0x143) >= 0) {
+ ops = &sony_backlight_ng_ops;
+ sony_bl_props.cmd_base = 0x3000;
+ sony_nc_backlight_ng_read_limits(0x143, &sony_bl_props);
+ max_brightness = sony_bl_props.maxlvl - sony_bl_props.offset;
+
} else if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "GBRT",
&unused))) {
ops = &sony_backlight_ops;
}
}
+ result = sony_laptop_setup_input(device);
+ if (result) {
+ pr_err("Unable to create input devices\n");
+ goto outplatform;
+ }
+
if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "ECON",
&handle))) {
int arg = 1;
}
/* setup input devices and helper fifo */
- result = sony_laptop_setup_input(device);
- if (result) {
- pr_err("Unable to create input devices\n");
- goto outsnc;
- }
-
if (acpi_video_backlight_support()) {
pr_info("brightness ignored, must be controlled by ACPI video driver\n");
} else {
return 0;
- out_sysfs:
+out_sysfs:
for (item = sony_nc_values; item->name; ++item) {
device_remove_file(&sony_pf_device->dev, &item->devattr);
}
sony_nc_backlight_cleanup();
-
- sony_laptop_remove_input();
-
- outsnc:
sony_nc_function_cleanup(sony_pf_device);
sony_nc_handles_cleanup(sony_pf_device);
- outpresent:
+outplatform:
+ sony_laptop_remove_input();
+
+outpresent:
sony_pf_remove();
- outwalk:
+outwalk:
sony_nc_rfkill_cleanup();
return result;
}
}
static struct of_regulator_match ab8500_regulator_matches[] = {
- { .name = "LDO-AUX1", .driver_data = (void *) AB8500_LDO_AUX1, },
- { .name = "LDO-AUX2", .driver_data = (void *) AB8500_LDO_AUX2, },
- { .name = "LDO-AUX3", .driver_data = (void *) AB8500_LDO_AUX3, },
- { .name = "LDO-INTCORE", .driver_data = (void *) AB8500_LDO_INTCORE, },
- { .name = "LDO-TVOUT", .driver_data = (void *) AB8500_LDO_TVOUT, },
- { .name = "LDO-USB", .driver_data = (void *) AB8500_LDO_USB, },
- { .name = "LDO-AUDIO", .driver_data = (void *) AB8500_LDO_AUDIO, },
- { .name = "LDO-ANAMIC1", .driver_data = (void *) AB8500_LDO_ANAMIC1, },
- { .name = "LDO-ANAMIC2", .driver_data = (void *) AB8500_LDO_ANAMIC2, },
- { .name = "LDO-DMIC", .driver_data = (void *) AB8500_LDO_DMIC, },
- { .name = "LDO-ANA", .driver_data = (void *) AB8500_LDO_ANA, },
+ { .name = "ab8500_ldo_aux1", .driver_data = (void *) AB8500_LDO_AUX1, },
+ { .name = "ab8500_ldo_aux2", .driver_data = (void *) AB8500_LDO_AUX2, },
+ { .name = "ab8500_ldo_aux3", .driver_data = (void *) AB8500_LDO_AUX3, },
+ { .name = "ab8500_ldo_intcore", .driver_data = (void *) AB8500_LDO_INTCORE, },
+ { .name = "ab8500_ldo_tvout", .driver_data = (void *) AB8500_LDO_TVOUT, },
+ { .name = "ab8500_ldo_usb", .driver_data = (void *) AB8500_LDO_USB, },
+ { .name = "ab8500_ldo_audio", .driver_data = (void *) AB8500_LDO_AUDIO, },
+ { .name = "ab8500_ldo_anamic1", .driver_data = (void *) AB8500_LDO_ANAMIC1, },
+ { .name = "ab8500_ldo_amamic2", .driver_data = (void *) AB8500_LDO_ANAMIC2, },
+ { .name = "ab8500_ldo_dmic", .driver_data = (void *) AB8500_LDO_DMIC, },
+ { .name = "ab8500_ldo_ana", .driver_data = (void *) AB8500_LDO_ANA, },
};
static __devinit int
.of_match_table = of_anatop_regulator_match_tbl,
},
.probe = anatop_regulator_probe,
- .remove = anatop_regulator_remove,
+ .remove = __devexit_p(anatop_regulator_remove),
};
static int __init anatop_regulator_init(void)
return -EINVAL;
}
+ if (min_uV < rdev->desc->min_uV)
+ min_uV = rdev->desc->min_uV;
+
ret = DIV_ROUND_UP(min_uV - rdev->desc->min_uV, rdev->desc->uV_step);
if (ret < 0)
return ret;
{
struct regulator_dev *rdev = regulator->rdev;
struct regulator *consumer;
- int ret, output_uV, input_uV, total_uA_load = 0;
+ int ret, output_uV, input_uV = 0, total_uA_load = 0;
unsigned int mode;
+ if (rdev->supply)
+ input_uV = regulator_get_voltage(rdev->supply);
+
mutex_lock(&rdev->mutex);
/*
goto out;
}
- /* get input voltage */
- input_uV = 0;
- if (rdev->supply)
- input_uV = regulator_get_voltage(rdev->supply);
+ /* No supply? Use constraint voltage */
if (input_uV <= 0)
input_uV = rdev->constraints->input_uV;
if (input_uV <= 0) {
}
static struct of_regulator_match db8500_regulator_matches[] = {
- { .name = "db8500-vape", .driver_data = (void *) DB8500_REGULATOR_VAPE, },
- { .name = "db8500-varm", .driver_data = (void *) DB8500_REGULATOR_VARM, },
- { .name = "db8500-vmodem", .driver_data = (void *) DB8500_REGULATOR_VMODEM, },
- { .name = "db8500-vpll", .driver_data = (void *) DB8500_REGULATOR_VPLL, },
- { .name = "db8500-vsmps1", .driver_data = (void *) DB8500_REGULATOR_VSMPS1, },
- { .name = "db8500-vsmps2", .driver_data = (void *) DB8500_REGULATOR_VSMPS2, },
- { .name = "db8500-vsmps3", .driver_data = (void *) DB8500_REGULATOR_VSMPS3, },
- { .name = "db8500-vrf1", .driver_data = (void *) DB8500_REGULATOR_VRF1, },
- { .name = "db8500-sva-mmdsp", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAMMDSP, },
- { .name = "db8500-sva-mmdsp-ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAMMDSPRET, },
- { .name = "db8500-sva-pipe", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAPIPE, },
- { .name = "db8500-sia-mmdsp", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAMMDSP, },
- { .name = "db8500-sia-mmdsp-ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAMMDSPRET, },
- { .name = "db8500-sia-pipe", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAPIPE, },
- { .name = "db8500-sga", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SGA, },
- { .name = "db8500-b2r2-mcde", .driver_data = (void *) DB8500_REGULATOR_SWITCH_B2R2_MCDE, },
- { .name = "db8500-esram12", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM12, },
- { .name = "db8500-esram12-ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM12RET, },
- { .name = "db8500-esram34", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM34, },
- { .name = "db8500-esram34-ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM34RET, },
+ { .name = "db8500_vape", .driver_data = (void *) DB8500_REGULATOR_VAPE, },
+ { .name = "db8500_varm", .driver_data = (void *) DB8500_REGULATOR_VARM, },
+ { .name = "db8500_vmodem", .driver_data = (void *) DB8500_REGULATOR_VMODEM, },
+ { .name = "db8500_vpll", .driver_data = (void *) DB8500_REGULATOR_VPLL, },
+ { .name = "db8500_vsmps1", .driver_data = (void *) DB8500_REGULATOR_VSMPS1, },
+ { .name = "db8500_vsmps2", .driver_data = (void *) DB8500_REGULATOR_VSMPS2, },
+ { .name = "db8500_vsmps3", .driver_data = (void *) DB8500_REGULATOR_VSMPS3, },
+ { .name = "db8500_vrf1", .driver_data = (void *) DB8500_REGULATOR_VRF1, },
+ { .name = "db8500_sva_mmdsp", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAMMDSP, },
+ { .name = "db8500_sva_mmdsp_ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAMMDSPRET, },
+ { .name = "db8500_sva_pipe", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAPIPE, },
+ { .name = "db8500_sia_mmdsp", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAMMDSP, },
+ { .name = "db8500_sia_mmdsp_ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAMMDSPRET, },
+ { .name = "db8500_sia_pipe", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAPIPE, },
+ { .name = "db8500_sga", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SGA, },
+ { .name = "db8500_b2r2_mcde", .driver_data = (void *) DB8500_REGULATOR_SWITCH_B2R2_MCDE, },
+ { .name = "db8500_esram12", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM12, },
+ { .name = "db8500_esram12_ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM12RET, },
+ { .name = "db8500_esram34", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM34, },
+ { .name = "db8500_esram34_ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM34RET, },
};
static __devinit int
}
static int gpio_regulator_set_value(struct regulator_dev *dev,
- int min, int max)
+ int min, int max, unsigned *selector)
{
struct gpio_regulator_data *data = rdev_get_drvdata(dev);
- int ptr, target, state, best_val = INT_MAX;
+ int ptr, target = 0, state, best_val = INT_MAX;
for (ptr = 0; ptr < data->nr_states; ptr++)
if (data->states[ptr].value < best_val &&
data->states[ptr].value >= min &&
- data->states[ptr].value <= max)
+ data->states[ptr].value <= max) {
target = data->states[ptr].gpios;
+ best_val = data->states[ptr].value;
+ if (selector)
+ *selector = ptr;
+ }
if (best_val == INT_MAX)
return -EINVAL;
int min_uV, int max_uV,
unsigned *selector)
{
- return gpio_regulator_set_value(dev, min_uV, max_uV);
+ return gpio_regulator_set_value(dev, min_uV, max_uV, selector);
}
static int gpio_regulator_list_voltage(struct regulator_dev *dev,
static int gpio_regulator_set_current_limit(struct regulator_dev *dev,
int min_uA, int max_uA)
{
- return gpio_regulator_set_value(dev, min_uA, max_uA);
+ return gpio_regulator_set_value(dev, min_uA, max_uA, NULL);
}
static struct regulator_ops gpio_regulator_voltage_ops = {
cfg.dev = &pdev->dev;
cfg.init_data = config->init_data;
- cfg.driver_data = &drvdata;
+ cfg.driver_data = drvdata;
drvdata->dev = regulator_register(&drvdata->desc, &cfg);
if (IS_ERR(drvdata->dev)) {
config.dev = &client->dev;
config.init_data = pdata->regulator;
config.driver_data = info;
+ config.regmap = info->regmap;
info->regulator = regulator_register(&dcdc_desc, &config);
if (IS_ERR(info->regulator)) {
pmic->desc[id].ops = &palmas_ops_smps10;
pmic->desc[id].vsel_reg = PALMAS_SMPS10_CTRL;
pmic->desc[id].vsel_mask = SMPS10_VSEL;
- pmic->desc[id].enable_reg = PALMAS_SMPS10_STATUS;
+ pmic->desc[id].enable_reg =
+ PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
+ PALMAS_SMPS10_STATUS);
pmic->desc[id].enable_mask = SMPS10_BOOST_EN;
}
pmic->desc[id].type = REGULATOR_VOLTAGE;
pmic->desc[id].owner = THIS_MODULE;
- pmic->desc[id].enable_reg = palmas_regs_info[id].ctrl_addr;
+ pmic->desc[id].enable_reg = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE,
+ palmas_regs_info[id].ctrl_addr);
pmic->desc[id].enable_mask = PALMAS_LDO1_CTRL_MODE_ACTIVE;
if (pdata && pdata->reg_data)
err_unregister_regulator:
while (--id >= 0)
regulator_unregister(pmic->rdev[id]);
- kfree(pmic->rdev);
- kfree(pmic->desc);
- kfree(pmic);
return ret;
}
for (id = 0; id < PALMAS_NUM_REGS; id++)
regulator_unregister(pmic->rdev[id]);
-
- kfree(pmic->rdev);
- kfree(pmic->desc);
- kfree(pmic);
return 0;
}
desc = reg_voltage_map[reg_id];
- if (old_sel < new_sel)
+ if ((old_sel < new_sel) && s5m8767->ramp_delay)
return DIV_ROUND_UP(desc->step * (new_sel - old_sel),
s5m8767->ramp_delay * 1000);
return 0;
/* LDO_CTRL bitfields */
#define TPS65023_LDO_CTRL_LDOx_SHIFT(ldo_id) ((ldo_id)*4)
-#define TPS65023_LDO_CTRL_LDOx_MASK(ldo_id) (0x0F << ((ldo_id)*4))
+#define TPS65023_LDO_CTRL_LDOx_MASK(ldo_id) (0x07 << ((ldo_id)*4))
/* Number of step-down converters available */
#define TPS65023_NUM_DCDC 3
info = &supply_info[rdev_get_id(rdev)];
if (info->flags & FIXED_VOLTAGE)
- return info->fixed_voltage;
+ return 0;
ret = read_field(hw, &info->voltage);
if (ret < 0)
config REMOTEPROC
tristate
depends on EXPERIMENTAL
+ select FW_CONFIG
config OMAP_REMOTEPROC
tristate "OMAP remoteproc support"
+ depends on EXPERIMENTAL
depends on ARCH_OMAP4
depends on OMAP_IOMMU
select REMOTEPROC
ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
if (ret) {
- dev_err(pdev->dev.parent, "dma_set_coherent_mask: %d\n", ret);
+ dev_err(&pdev->dev, "dma_set_coherent_mask: %d\n", ret);
return ret;
}
}
if (offset + filesz > len) {
- dev_err(dev, "truncated fw: need 0x%x avail 0x%x\n",
+ dev_err(dev, "truncated fw: need 0x%x avail 0x%zx\n",
offset + filesz, len);
ret = -EINVAL;
break;
unmapped = iommu_unmap(rproc->domain, entry->da, entry->len);
if (unmapped != entry->len) {
/* nothing much to do besides complaining */
- dev_err(dev, "failed to unmap %u/%u\n", entry->len,
+ dev_err(dev, "failed to unmap %u/%zu\n", entry->len,
unmapped);
}
ehdr = (struct elf32_hdr *)fw->data;
- dev_info(dev, "Booting fw image %s, size %d\n", name, fw->size);
+ dev_info(dev, "Booting fw image %s, size %zd\n", name, fw->size);
/*
* if enabling an IOMMU isn't relevant for this rproc, this is
/* look for the resource table */
table = rproc_find_rsc_table(rproc, fw->data, fw->size, &tablesz);
- if (!table)
+ if (!table) {
+ ret = -EINVAL;
goto clean_up;
+ }
/* handle fw resources which are required to boot rproc */
ret = rproc_handle_boot_rsc(rproc, table, tablesz);
rpdev->id.name);
}
+/**
+ * __ept_release() - deallocate an rpmsg endpoint
+ * @kref: the ept's reference count
+ *
+ * This function deallocates an ept, and is invoked when its @kref refcount
+ * drops to zero.
+ *
+ * Never invoke this function directly!
+ */
+static void __ept_release(struct kref *kref)
+{
+ struct rpmsg_endpoint *ept = container_of(kref, struct rpmsg_endpoint,
+ refcount);
+ /*
+ * At this point no one holds a reference to ept anymore,
+ * so we can directly free it
+ */
+ kfree(ept);
+}
+
/* for more info, see below documentation of rpmsg_create_ept() */
static struct rpmsg_endpoint *__rpmsg_create_ept(struct virtproc_info *vrp,
struct rpmsg_channel *rpdev, rpmsg_rx_cb_t cb,
return NULL;
}
+ kref_init(&ept->refcount);
+ mutex_init(&ept->cb_lock);
+
ept->rpdev = rpdev;
ept->cb = cb;
ept->priv = priv;
idr_remove(&vrp->endpoints, request);
free_ept:
mutex_unlock(&vrp->endpoints_lock);
- kfree(ept);
+ kref_put(&ept->refcount, __ept_release);
return NULL;
}
static void
__rpmsg_destroy_ept(struct virtproc_info *vrp, struct rpmsg_endpoint *ept)
{
+ /* make sure new inbound messages can't find this ept anymore */
mutex_lock(&vrp->endpoints_lock);
idr_remove(&vrp->endpoints, ept->addr);
mutex_unlock(&vrp->endpoints_lock);
- kfree(ept);
+ /* make sure in-flight inbound messages won't invoke cb anymore */
+ mutex_lock(&ept->cb_lock);
+ ept->cb = NULL;
+ mutex_unlock(&ept->cb_lock);
+
+ kref_put(&ept->refcount, __ept_release);
}
/**
/* use the dst addr to fetch the callback of the appropriate user */
mutex_lock(&vrp->endpoints_lock);
+
ept = idr_find(&vrp->endpoints, msg->dst);
+
+ /* let's make sure no one deallocates ept while we use it */
+ if (ept)
+ kref_get(&ept->refcount);
+
mutex_unlock(&vrp->endpoints_lock);
- if (ept && ept->cb)
- ept->cb(ept->rpdev, msg->data, msg->len, ept->priv, msg->src);
- else
+ if (ept) {
+ /* make sure ept->cb doesn't go away while we use it */
+ mutex_lock(&ept->cb_lock);
+
+ if (ept->cb)
+ ept->cb(ept->rpdev, msg->data, msg->len, ept->priv,
+ msg->src);
+
+ mutex_unlock(&ept->cb_lock);
+
+ /* farewell, ept, we don't need you anymore */
+ kref_put(&ept->refcount, __ept_release);
+ } else
dev_warn(dev, "msg received with no recepient\n");
/* publish the real size of the buffer */
return ret;
}
-module_init(rpmsg_init);
+subsys_initcall(rpmsg_init);
static void __exit rpmsg_fini(void)
{
#include <linux/mfd/abx500.h>
#include <linux/mfd/abx500/ab8500.h>
#include <linux/delay.h>
+#include <linux/of.h>
#define AB8500_RTC_SOFF_STAT_REG 0x00
#define AB8500_RTC_CC_CONF_REG 0x01
}
err = request_threaded_irq(irq, NULL, rtc_alarm_handler,
- IRQF_NO_SUSPEND, "ab8500-rtc", rtc);
+ IRQF_NO_SUSPEND | IRQF_ONESHOT, "ab8500-rtc", rtc);
if (err < 0) {
rtc_device_unregister(rtc);
return err;
platform_set_drvdata(pdev, rtc);
-
err = ab8500_sysfs_rtc_register(&pdev->dev);
if (err) {
dev_err(&pdev->dev, "sysfs RTC failed to register\n");
return 0;
}
+static const struct of_device_id ab8500_rtc_match[] = {
+ { .compatible = "stericsson,ab8500-rtc", },
+ {}
+};
+
static struct platform_driver ab8500_rtc_driver = {
.driver = {
.name = "ab8500-rtc",
.owner = THIS_MODULE,
+ .of_match_table = ab8500_rtc_match,
},
.probe = ab8500_rtc_probe,
.remove = __devexit_p(ab8500_rtc_remove),
static u32 rtc_handler(void *context)
{
+ struct device *dev = context;
+
+ pm_wakeup_event(dev, 0);
acpi_clear_event(ACPI_EVENT_RTC);
acpi_disable_event(ACPI_EVENT_RTC, 0);
return ACPI_INTERRUPT_HANDLED;
}
-static inline void rtc_wake_setup(void)
+static inline void rtc_wake_setup(struct device *dev)
{
- acpi_install_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler, NULL);
+ acpi_install_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler, dev);
/*
* After the RTC handler is installed, the Fixed_RTC event should
* be disabled. Only when the RTC alarm is set will it be enabled.
if (acpi_disabled)
return;
- rtc_wake_setup();
+ rtc_wake_setup(dev);
acpi_rtc_info.wake_on = rtc_wake_on;
acpi_rtc_info.wake_off = rtc_wake_off;
struct platform_device *pdev = dev_id;
struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
void __iomem *ioaddr = pdata->ioaddr;
+ unsigned long flags;
u32 status;
u32 events = 0;
- spin_lock_irq(&pdata->rtc->irq_lock);
+ spin_lock_irqsave(&pdata->rtc->irq_lock, flags);
status = readw(ioaddr + RTC_RTCISR) & readw(ioaddr + RTC_RTCIENR);
/* clear interrupt sources */
writew(status, ioaddr + RTC_RTCISR);
events |= (RTC_PF | RTC_IRQF);
rtc_update_irq(pdata->rtc, 1, events);
- spin_unlock_irq(&pdata->rtc->irq_lock);
+ spin_unlock_irqrestore(&pdata->rtc->irq_lock, flags);
return IRQ_HANDLED;
}
clk_disable(config->clk);
clk_put(config->clk);
iounmap(config->ioaddr);
- kfree(config);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res)
release_mem_region(res->start, resource_size(res));
platform_set_drvdata(pdev, NULL);
rtc_device_unregister(config->rtc);
+ kfree(config);
return 0;
}
}
ret = request_threaded_irq(irq, NULL, twl_rtc_interrupt,
- IRQF_TRIGGER_RISING,
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
dev_name(&rtc->dev), rtc);
if (ret < 0) {
dev_err(&pdev->dev, "IRQ is not free.\n");
if (SAS_STATUS_BUF_SIZE >= sizeof(*resp)) {
resp->frame_len = le16_to_cpu(*(__le16 *)(r+6));
- memcpy(&resp->ending_fis[0], r+16, 24);
+ memcpy(&resp->ending_fis[0], r+16, ATA_RESP_FIS_SIZE);
ts->buf_valid_size = sizeof(*resp);
}
}
struct pci_dev *pcidev;
struct net_device *netdev;
void __iomem *regview;
+ resource_size_t reg_base;
u32 age;
unsigned long cnic_dev_type;
goto arm_cq;
}
- reg_base = ep->hba->netdev->base_addr;
if ((test_bit(BNX2I_NX2_DEV_5709, &ep->hba->cnic_dev_type)) &&
(ep->hba->mail_queue_access == BNX2I_MQ_BIN_MODE)) {
config2 = REG_RD(ep->hba, BNX2_MQ_CONFIG2);
/* 5709 device in normal node and 5706/5708 devices */
reg_off = CTX_OFFSET + (MB_KERNEL_CTX_SIZE * cid_num);
- ep->qp.ctx_base = ioremap_nocache(reg_base + reg_off,
+ ep->qp.ctx_base = ioremap_nocache(ep->hba->reg_base + reg_off,
MB_KERNEL_CTX_SIZE);
if (!ep->qp.ctx_base)
return -ENOMEM;
bnx2i_identify_device(hba);
bnx2i_setup_host_queue_size(hba, shost);
+ hba->reg_base = pci_resource_start(hba->pcidev, 0);
if (test_bit(BNX2I_NX2_DEV_5709, &hba->cnic_dev_type)) {
- hba->regview = ioremap_nocache(hba->netdev->base_addr,
- BNX2_MQ_CONFIG2);
+ hba->regview = pci_iomap(hba->pcidev, 0, BNX2_MQ_CONFIG2);
if (!hba->regview)
goto ioreg_map_err;
} else if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type)) {
- hba->regview = ioremap_nocache(hba->netdev->base_addr, 4096);
+ hba->regview = pci_iomap(hba->pcidev, 0, 4096);
if (!hba->regview)
goto ioreg_map_err;
}
bnx2i_free_mp_bdt(hba);
mp_bdt_mem_err:
if (hba->regview) {
- iounmap(hba->regview);
+ pci_iounmap(hba->pcidev, hba->regview);
hba->regview = NULL;
}
ioreg_map_err:
pci_dev_put(hba->pcidev);
if (hba->regview) {
- iounmap(hba->regview);
+ pci_iounmap(hba->pcidev, hba->regview);
hba->regview = NULL;
}
bnx2i_free_mp_bdt(hba);
if (stat->stat == SAS_PROTO_RESPONSE || stat->stat == SAM_STAT_GOOD ||
((stat->stat == SAM_STAT_CHECK_CONDITION &&
dev->sata_dev.command_set == ATAPI_COMMAND_SET))) {
- ata_tf_from_fis(resp->ending_fis, &dev->sata_dev.tf);
+ memcpy(dev->sata_dev.fis, resp->ending_fis, ATA_RESP_FIS_SIZE);
if (!link->sactive) {
- qc->err_mask |= ac_err_mask(dev->sata_dev.tf.command);
+ qc->err_mask |= ac_err_mask(dev->sata_dev.fis[2]);
} else {
- link->eh_info.err_mask |= ac_err_mask(dev->sata_dev.tf.command);
+ link->eh_info.err_mask |= ac_err_mask(dev->sata_dev.fis[2]);
if (unlikely(link->eh_info.err_mask))
qc->flags |= ATA_QCFLAG_FAILED;
}
qc->flags |= ATA_QCFLAG_FAILED;
}
- dev->sata_dev.tf.feature = 0x04; /* status err */
- dev->sata_dev.tf.command = ATA_ERR;
+ dev->sata_dev.fis[3] = 0x04; /* status err */
+ dev->sata_dev.fis[2] = ATA_ERR;
}
}
{
struct domain_device *dev = qc->ap->private_data;
- memcpy(&qc->result_tf, &dev->sata_dev.tf, sizeof(qc->result_tf));
+ ata_tf_from_fis(dev->sata_dev.fis, &qc->result_tf);
return true;
}
static inline u8
_base_get_msix_index(struct MPT2SAS_ADAPTER *ioc)
{
- return ioc->cpu_msix_table[smp_processor_id()];
+ return ioc->cpu_msix_table[raw_smp_processor_id()];
}
/**
#include <linux/module.h>
#include <linux/init.h>
#include <linux/types.h>
-#include <linux/version.h>
#include <linux/blkdev.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
}
cmd = qlt_ctio_to_cmd(vha, handle, ctio);
- if (cmd == NULL) {
- if (status != CTIO_SUCCESS)
- qlt_term_ctio_exchange(vha, ctio, NULL, status);
+ if (cmd == NULL)
return;
- }
+
se_cmd = &cmd->se_cmd;
tfo = se_cmd->se_tfo;
out_term:
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf020, "Terminating work cmd %p", cmd);
/*
- * cmd has not sent to target yet, so pass NULL as the second argument
+ * cmd has not sent to target yet, so pass NULL as the second
+ * argument to qlt_send_term_exchange() and free the memory here.
*/
spin_lock_irqsave(&ha->hardware_lock, flags);
qlt_send_term_exchange(vha, NULL, &cmd->atio, 1);
+ kmem_cache_free(qla_tgt_cmd_cachep, cmd);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
if (sess)
ha->tgt.tgt_ops->put_sess(sess);
{
struct qla_hw_data *ha = vha->hw;
struct qla_tgt *tgt = ha->tgt.qla_tgt;
- int reason_code;
+ int login_code;
ql_dbg(ql_dbg_tgt, vha, 0xe039,
"scsi(%ld): ha state %d init_done %d oper_mode %d topo %d\n",
{
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf03b,
"qla_target(%d): Async LOOP_UP occured "
- "(m[1]=%x, m[2]=%x, m[3]=%x, m[4]=%x)", vha->vp_idx,
- le16_to_cpu(mailbox[1]), le16_to_cpu(mailbox[2]),
- le16_to_cpu(mailbox[3]), le16_to_cpu(mailbox[4]));
+ "(m[0]=%x, m[1]=%x, m[2]=%x, m[3]=%x)", vha->vp_idx,
+ le16_to_cpu(mailbox[0]), le16_to_cpu(mailbox[1]),
+ le16_to_cpu(mailbox[2]), le16_to_cpu(mailbox[3]));
if (tgt->link_reinit_iocb_pending) {
qlt_send_notify_ack(vha, (void *)&tgt->link_reinit_iocb,
0, 0, 0, 0, 0, 0);
case MBA_RSCN_UPDATE:
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf03c,
"qla_target(%d): Async event %#x occured "
- "(m[1]=%x, m[2]=%x, m[3]=%x, m[4]=%x)", vha->vp_idx, code,
- le16_to_cpu(mailbox[1]), le16_to_cpu(mailbox[2]),
- le16_to_cpu(mailbox[3]), le16_to_cpu(mailbox[4]));
+ "(m[0]=%x, m[1]=%x, m[2]=%x, m[3]=%x)", vha->vp_idx, code,
+ le16_to_cpu(mailbox[0]), le16_to_cpu(mailbox[1]),
+ le16_to_cpu(mailbox[2]), le16_to_cpu(mailbox[3]));
break;
case MBA_PORT_UPDATE:
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf03d,
"qla_target(%d): Port update async event %#x "
- "occured: updating the ports database (m[1]=%x, m[2]=%x, "
- "m[3]=%x, m[4]=%x)", vha->vp_idx, code,
- le16_to_cpu(mailbox[1]), le16_to_cpu(mailbox[2]),
- le16_to_cpu(mailbox[3]), le16_to_cpu(mailbox[4]));
- reason_code = le16_to_cpu(mailbox[2]);
- if (reason_code == 0x4)
+ "occured: updating the ports database (m[0]=%x, m[1]=%x, "
+ "m[2]=%x, m[3]=%x)", vha->vp_idx, code,
+ le16_to_cpu(mailbox[0]), le16_to_cpu(mailbox[1]),
+ le16_to_cpu(mailbox[2]), le16_to_cpu(mailbox[3]));
+
+ login_code = le16_to_cpu(mailbox[2]);
+ if (login_code == 0x4)
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf03e,
"Async MB 2: Got PLOGI Complete\n");
- else if (reason_code == 0x7)
+ else if (login_code == 0x7)
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf03f,
"Async MB 2: Port Logged Out\n");
break;
default:
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf040,
"qla_target(%d): Async event %#x occured: "
- "ignore (m[1]=%x, m[2]=%x, m[3]=%x, m[4]=%x)", vha->vp_idx,
- code, le16_to_cpu(mailbox[1]), le16_to_cpu(mailbox[2]),
- le16_to_cpu(mailbox[3]), le16_to_cpu(mailbox[4]));
+ "ignore (m[0]=%x, m[1]=%x, m[2]=%x, m[3]=%x)", vha->vp_idx,
+ code, le16_to_cpu(mailbox[0]), le16_to_cpu(mailbox[1]),
+ le16_to_cpu(mailbox[2]), le16_to_cpu(mailbox[3]));
break;
}
#define QLA_TGT_XMIT_STATUS 2
#define QLA_TGT_XMIT_ALL (QLA_TGT_XMIT_STATUS|QLA_TGT_XMIT_DATA)
-#include <linux/version.h>
extern struct qla_tgt_data qla_target;
/*
*/
static int tcm_qla2xxx_npiv_extract_wwn(const char *ns, u64 *nm)
{
- unsigned int i, j, value;
+ unsigned int i, j;
u8 wwn[8];
memset(wwn, 0, sizeof(wwn));
/* Validate and store the new name */
for (i = 0, j = 0; i < 16; i++) {
+ int value;
+
value = hex_to_bin(*ns++);
if (value >= 0)
j = (j << 4) | value;
/*
* Called from qla_target.c:qlt_issue_task_mgmt()
*/
-int tcm_qla2xxx_handle_tmr(struct qla_tgt_mgmt_cmd *mcmd, uint32_t lun,
- uint8_t tmr_func, uint32_t tag)
+static int tcm_qla2xxx_handle_tmr(struct qla_tgt_mgmt_cmd *mcmd, uint32_t lun,
+ uint8_t tmr_func, uint32_t tag)
{
struct qla_tgt_sess *sess = mcmd->sess;
struct se_cmd *se_cmd = &mcmd->se_cmd;
struct target_fabric_configfs *tcm_qla2xxx_fabric_configfs;
struct target_fabric_configfs *tcm_qla2xxx_npiv_fabric_configfs;
-static int tcm_qla2xxx_setup_nacl_from_rport(
- struct se_portal_group *se_tpg,
- struct se_node_acl *se_nacl,
- struct tcm_qla2xxx_lport *lport,
- struct tcm_qla2xxx_nacl *nacl,
- u64 rport_wwnn)
-{
- struct scsi_qla_host *vha = lport->qla_vha;
- struct Scsi_Host *sh = vha->host;
- struct fc_host_attrs *fc_host = shost_to_fc_host(sh);
- struct fc_rport *rport;
- unsigned long flags;
- void *node;
- int rc;
-
- /*
- * Scan the existing rports, and create a session for the
- * explict NodeACL is an matching rport->node_name already
- * exists.
- */
- spin_lock_irqsave(sh->host_lock, flags);
- list_for_each_entry(rport, &fc_host->rports, peers) {
- if (rport_wwnn != rport->node_name)
- continue;
-
- pr_debug("Located existing rport_wwpn and rport->node_name: 0x%016LX, port_id: 0x%04x\n",
- rport->node_name, rport->port_id);
- nacl->nport_id = rport->port_id;
-
- spin_unlock_irqrestore(sh->host_lock, flags);
-
- spin_lock_irqsave(&vha->hw->hardware_lock, flags);
- node = btree_lookup32(&lport->lport_fcport_map, rport->port_id);
- if (node) {
- rc = btree_update32(&lport->lport_fcport_map,
- rport->port_id, se_nacl);
- } else {
- rc = btree_insert32(&lport->lport_fcport_map,
- rport->port_id, se_nacl,
- GFP_ATOMIC);
- }
- spin_unlock_irqrestore(&vha->hw->hardware_lock, flags);
-
- if (rc) {
- pr_err("Unable to insert se_nacl into fcport_map");
- WARN_ON(rc > 0);
- return rc;
- }
-
- pr_debug("Inserted into fcport_map: %p for WWNN: 0x%016LX, port_id: 0x%08x\n",
- se_nacl, rport_wwnn, nacl->nport_id);
-
- return 1;
- }
- spin_unlock_irqrestore(sh->host_lock, flags);
-
- return 0;
-}
-
+static void tcm_qla2xxx_clear_sess_lookup(struct tcm_qla2xxx_lport *,
+ struct tcm_qla2xxx_nacl *, struct qla_tgt_sess *);
/*
* Expected to be called with struct qla_hw_data->hardware_lock held
*/
pr_debug("Removed from fcport_map: %p for WWNN: 0x%016LX, port_id: 0x%06x\n",
se_nacl, nacl->nport_wwnn, nacl->nport_id);
+ /*
+ * Now clear the se_nacl and session pointers from our HW lport lookup
+ * table mapping for this initiator's fabric S_ID and LOOP_ID entries.
+ *
+ * This is done ahead of callbacks into tcm_qla2xxx_free_session() ->
+ * target_wait_for_sess_cmds() before the session waits for outstanding
+ * I/O to complete, to avoid a race between session shutdown execution
+ * and incoming ATIOs or TMRs picking up a stale se_node_act reference.
+ */
+ tcm_qla2xxx_clear_sess_lookup(lport, nacl, sess);
+}
+
+static void tcm_qla2xxx_release_session(struct kref *kref)
+{
+ struct se_session *se_sess = container_of(kref,
+ struct se_session, sess_kref);
+
+ qlt_unreg_sess(se_sess->fabric_sess_ptr);
+}
+
+static void tcm_qla2xxx_put_session(struct se_session *se_sess)
+{
+ struct qla_tgt_sess *sess = se_sess->fabric_sess_ptr;
+ struct qla_hw_data *ha = sess->vha->hw;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ kref_put(&se_sess->sess_kref, tcm_qla2xxx_release_session);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
static void tcm_qla2xxx_put_sess(struct qla_tgt_sess *sess)
{
- target_put_session(sess->se_sess);
+ tcm_qla2xxx_put_session(sess->se_sess);
}
static void tcm_qla2xxx_shutdown_sess(struct qla_tgt_sess *sess)
struct config_group *group,
const char *name)
{
- struct se_wwn *se_wwn = se_tpg->se_tpg_wwn;
- struct tcm_qla2xxx_lport *lport = container_of(se_wwn,
- struct tcm_qla2xxx_lport, lport_wwn);
struct se_node_acl *se_nacl, *se_nacl_new;
struct tcm_qla2xxx_nacl *nacl;
u64 wwnn;
u32 qla2xxx_nexus_depth;
- int rc;
if (tcm_qla2xxx_parse_wwn(name, &wwnn, 1) < 0)
return ERR_PTR(-EINVAL);
nacl = container_of(se_nacl, struct tcm_qla2xxx_nacl, se_node_acl);
nacl->nport_wwnn = wwnn;
tcm_qla2xxx_format_wwn(&nacl->nport_name[0], TCM_QLA2XXX_NAMELEN, wwnn);
- /*
- * Setup a se_nacl handle based on an a matching struct fc_rport setup
- * via drivers/scsi/qla2xxx/qla_init.c:qla2x00_reg_remote_port()
- */
- rc = tcm_qla2xxx_setup_nacl_from_rport(se_tpg, se_nacl, lport,
- nacl, wwnn);
- if (rc < 0) {
- tcm_qla2xxx_release_fabric_acl(se_tpg, se_nacl_new);
- return ERR_PTR(rc);
- }
return se_nacl;
}
nacl->qla_tgt_sess, new_se_nacl, new_se_nacl->initiatorname);
}
+/*
+ * Should always be called with qla_hw_data->hardware_lock held.
+ */
+static void tcm_qla2xxx_clear_sess_lookup(struct tcm_qla2xxx_lport *lport,
+ struct tcm_qla2xxx_nacl *nacl, struct qla_tgt_sess *sess)
+{
+ struct se_session *se_sess = sess->se_sess;
+ unsigned char be_sid[3];
+
+ be_sid[0] = sess->s_id.b.domain;
+ be_sid[1] = sess->s_id.b.area;
+ be_sid[2] = sess->s_id.b.al_pa;
+
+ tcm_qla2xxx_set_sess_by_s_id(lport, NULL, nacl, se_sess,
+ sess, be_sid);
+ tcm_qla2xxx_set_sess_by_loop_id(lport, NULL, nacl, se_sess,
+ sess, sess->loop_id);
+}
+
static void tcm_qla2xxx_free_session(struct qla_tgt_sess *sess)
{
struct qla_tgt *tgt = sess->tgt;
struct se_node_acl *se_nacl;
struct tcm_qla2xxx_lport *lport;
struct tcm_qla2xxx_nacl *nacl;
- unsigned char be_sid[3];
- unsigned long flags;
BUG_ON(in_interrupt());
return;
}
target_wait_for_sess_cmds(se_sess, 0);
- /*
- * And now clear the se_nacl and session pointers from our HW lport
- * mappings for fabric S_ID and LOOP_ID.
- */
- memset(&be_sid, 0, 3);
- be_sid[0] = sess->s_id.b.domain;
- be_sid[1] = sess->s_id.b.area;
- be_sid[2] = sess->s_id.b.al_pa;
-
- spin_lock_irqsave(&ha->hardware_lock, flags);
- tcm_qla2xxx_set_sess_by_s_id(lport, NULL, nacl, se_sess,
- sess, be_sid);
- tcm_qla2xxx_set_sess_by_loop_id(lport, NULL, nacl, se_sess,
- sess, sess->loop_id);
- spin_unlock_irqrestore(&ha->hardware_lock, flags);
transport_deregister_session_configfs(sess->se_sess);
transport_deregister_session(sess->se_sess);
.new_cmd_map = NULL,
.check_stop_free = tcm_qla2xxx_check_stop_free,
.release_cmd = tcm_qla2xxx_release_cmd,
+ .put_session = tcm_qla2xxx_put_session,
.shutdown_session = tcm_qla2xxx_shutdown_session,
.close_session = tcm_qla2xxx_close_session,
.sess_get_index = tcm_qla2xxx_sess_get_index,
.tpg_release_fabric_acl = tcm_qla2xxx_release_fabric_acl,
.tpg_get_inst_index = tcm_qla2xxx_tpg_get_inst_index,
.release_cmd = tcm_qla2xxx_release_cmd,
+ .put_session = tcm_qla2xxx_put_session,
.shutdown_session = tcm_qla2xxx_shutdown_session,
.close_session = tcm_qla2xxx_close_session,
.sess_get_index = tcm_qla2xxx_sess_get_index,
EXPORT_SYMBOL(scsi_logging_level);
#endif
-#if IS_ENABLED(CONFIG_PM) || IS_ENABLED(CONFIG_BLK_DEV_SD)
-/* sd and scsi_pm need to coordinate flushing async actions */
+/* sd, scsi core and power management need to coordinate flushing async actions */
LIST_HEAD(scsi_sd_probe_domain);
EXPORT_SYMBOL(scsi_sd_probe_domain);
-#endif
/* NB: These are exposed through /proc/scsi/scsi and form part of the ABI.
* You may not alter any existing entry (although adding new ones is
* and might not yet have reached the scsi async scanning
*/
wait_for_device_probe();
- /*
- * and then we wait for the actual asynchronous scsi scan
- * to finish.
- */
- scsi_complete_async_scans();
return 0;
}
{
if (sdp->host->max_cmd_len < 16)
return 0;
+ if (sdp->try_rc_10_first)
+ return 0;
if (sdp->scsi_level > SCSI_SPC_2)
return 1;
if (scsi_device_protection(sdp))
mcspi_dma = &mcspi->dma_channels[spi->chip_select];
if (!cs) {
- cs = devm_kzalloc(&spi->dev , sizeof *cs, GFP_KERNEL);
+ cs = kzalloc(sizeof *cs, GFP_KERNEL);
if (!cs)
return -ENOMEM;
cs->base = mcspi->base + spi->chip_select * 0x14;
cs = spi->controller_state;
list_del(&cs->node);
+ kfree(cs);
}
if (spi->chip_select < spi->master->num_chipselect) {
#include <linux/pci.h>
#include <linux/usb.h>
#include <linux/errno.h>
+#include <linux/kconfig.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/fcntl.h>
}
EXPORT_SYMBOL_GPL(comedi_pci_driver_unregister);
+#if IS_ENABLED(CONFIG_USB)
+
static int comedi_old_usb_auto_config(struct usb_interface *intf,
struct comedi_driver *driver)
{
comedi_driver_unregister(comedi_driver);
}
EXPORT_SYMBOL_GPL(comedi_usb_driver_unregister);
+
+#endif
void netlink_exit(struct sock *sock)
{
- sock_release(sock->sk_socket);
+ netlink_kernel_release(sock);
}
int netlink_send(struct sock *sock, int group, u16 type, void *msg, int len)
* info->driver_module:
Set to THIS_MODULE. Used to ensure correct ownership
of various resources allocate by the core.
- * info->num_interrupt_lines:
- Number of event triggering hardware lines the device has.
* info->event_attrs:
Attributes used to enable / disable hardware events.
* info->attrs:
config AD7298
tristate "Analog Devices AD7298 ADC driver"
depends on SPI
+ select IIO_KFIFO_BUF if IIO_BUFFER
help
Say yes here to build support for Analog Devices AD7298
8 Channel ADC with temperature sensor.
.indexed = 1, \
.channel = num, \
.address = num, \
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, \
+ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
+ IIO_CHAN_INFO_SCALE_SHARED_BIT, \
.scan_index = num, \
.scan_type = IIO_ST('s', 16, 16, 0), \
}
static struct lirc_serial hardware[] = {
[LIRC_HOMEBREW] = {
+ .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_HOMEBREW].lock),
.signal_pin = UART_MSR_DCD,
.signal_pin_change = UART_MSR_DDCD,
.on = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR),
},
[LIRC_IRDEO] = {
+ .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_IRDEO].lock),
.signal_pin = UART_MSR_DSR,
.signal_pin_change = UART_MSR_DDSR,
.on = UART_MCR_OUT2,
},
[LIRC_IRDEO_REMOTE] = {
+ .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_IRDEO_REMOTE].lock),
.signal_pin = UART_MSR_DSR,
.signal_pin_change = UART_MSR_DDSR,
.on = (UART_MCR_RTS | UART_MCR_DTR | UART_MCR_OUT2),
},
[LIRC_ANIMAX] = {
+ .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_ANIMAX].lock),
.signal_pin = UART_MSR_DCD,
.signal_pin_change = UART_MSR_DDCD,
.on = 0,
},
[LIRC_IGOR] = {
+ .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_IGOR].lock),
.signal_pin = UART_MSR_DSR,
.signal_pin_change = UART_MSR_DDSR,
.on = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR),
* See also http://www.nslu2-linux.org for this device
*/
[LIRC_NSLU2] = {
+ .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_NSLU2].lock),
.signal_pin = UART_MSR_CTS,
.signal_pin_change = UART_MSR_DCTS,
.on = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR),
*/
ret = omap_gem_get_paddr(fbdev->bo, &paddr, true);
if (ret) {
- dev_err(dev->dev, "could not map (paddr)!\n");
+ dev_err(dev->dev,
+ "could not map (paddr)! Skipping framebuffer alloc\n");
ret = -ENOMEM;
goto fail;
}
fbi = helper->fbdev;
- unregister_framebuffer(fbi);
- framebuffer_release(fbi);
+ /* only cleanup framebuffer if it is present */
+ if (fbi) {
+ unregister_framebuffer(fbi);
+ framebuffer_release(fbi);
+ }
drm_fb_helper_fini(helper);
return oid;
}
-static int zcache_frontswap_put_page(unsigned type, pgoff_t offset,
+static int zcache_frontswap_store(unsigned type, pgoff_t offset,
struct page *page)
{
u64 ind64 = (u64)offset;
/* returns 0 if the page was successfully gotten from frontswap, -1 if
* was not present (should never happen!) */
-static int zcache_frontswap_get_page(unsigned type, pgoff_t offset,
+static int zcache_frontswap_load(unsigned type, pgoff_t offset,
struct page *page)
{
u64 ind64 = (u64)offset;
}
static struct frontswap_ops zcache_frontswap_ops = {
- .put_page = zcache_frontswap_put_page,
- .get_page = zcache_frontswap_get_page,
+ .store = zcache_frontswap_store,
+ .load = zcache_frontswap_load,
.invalidate_page = zcache_frontswap_flush_page,
.invalidate_area = zcache_frontswap_flush_area,
.init = zcache_frontswap_init
/* - */
{USB_DEVICE(0x20F4, 0x646B)},
{USB_DEVICE(0x083A, 0xC512)},
+ {USB_DEVICE(0x25D4, 0x4CA1)},
+ {USB_DEVICE(0x25D4, 0x4CAB)},
/* RTL8191SU */
/* Realtek */
* Swizzling increases objects per swaptype, increasing tmem concurrency
* for heavy swaploads. Later, larger nr_cpus -> larger SWIZ_BITS
* Setting SWIZ_BITS to 27 basically reconstructs the swap entry from
- * frontswap_get_page(), but has side-effects. Hence using 8.
+ * frontswap_load(), but has side-effects. Hence using 8.
*/
#define SWIZ_BITS 8
#define SWIZ_MASK ((1 << SWIZ_BITS) - 1)
return oid;
}
-static int zcache_frontswap_put_page(unsigned type, pgoff_t offset,
+static int zcache_frontswap_store(unsigned type, pgoff_t offset,
struct page *page)
{
u64 ind64 = (u64)offset;
/* returns 0 if the page was successfully gotten from frontswap, -1 if
* was not present (should never happen!) */
-static int zcache_frontswap_get_page(unsigned type, pgoff_t offset,
+static int zcache_frontswap_load(unsigned type, pgoff_t offset,
struct page *page)
{
u64 ind64 = (u64)offset;
}
static struct frontswap_ops zcache_frontswap_ops = {
- .put_page = zcache_frontswap_put_page,
- .get_page = zcache_frontswap_get_page,
+ .store = zcache_frontswap_store,
+ .load = zcache_frontswap_load,
.invalidate_page = zcache_frontswap_flush_page,
.invalidate_area = zcache_frontswap_flush_area,
.init = zcache_frontswap_init
{
struct sbp_tport *tport = agent->tport;
struct sbp_tpg *tpg = tport->tpg;
- int login_id;
+ int id;
struct sbp_login_descriptor *login;
- login_id = LOGOUT_ORB_LOGIN_ID(be32_to_cpu(req->orb.misc));
+ id = LOGOUT_ORB_LOGIN_ID(be32_to_cpu(req->orb.misc));
- login = sbp_login_find_by_id(tpg, login_id);
+ login = sbp_login_find_by_id(tpg, id);
if (!login) {
- pr_warn("cannot find login: %d\n", login_id);
+ pr_warn("cannot find login: %d\n", id);
req->status.status = cpu_to_be32(
STATUS_BLOCK_RESP(STATUS_RESP_REQUEST_COMPLETE) |
out:
transport_kunmap_data_sg(cmd);
- target_complete_cmd(cmd, GOOD);
- return 0;
+ if (!rc)
+ target_complete_cmd(cmd, GOOD);
+ return rc;
}
static inline int core_alua_state_nonoptimized(
if (num_blocks != 0)
range = num_blocks;
else
- range = (dev->transport->get_blocks(dev) - lba);
+ range = (dev->transport->get_blocks(dev) - lba) + 1;
pr_debug("WRITE_SAME UNMAP: LBA: %llu Range: %llu\n",
(unsigned long long)lba, (unsigned long long)range);
ret = PTR_ERR(dev_p);
goto fail;
}
-
- /* O_DIRECT too? */
- flags = O_RDWR | O_CREAT | O_LARGEFILE;
-
/*
- * If fd_buffered_io=1 has not been set explicitly (the default),
- * use O_SYNC to force FILEIO writes to disk.
+ * Use O_DSYNC by default instead of O_SYNC to forgo syncing
+ * of pure timestamp updates.
*/
- if (!(fd_dev->fbd_flags & FDBD_USE_BUFFERED_IO))
- flags |= O_SYNC;
+ flags = O_RDWR | O_CREAT | O_LARGEFILE | O_DSYNC;
file = filp_open(dev_p, flags, 0600);
if (IS_ERR(file)) {
}
}
-static void fd_emulate_write_fua(struct se_cmd *cmd)
-{
- struct se_device *dev = cmd->se_dev;
- struct fd_dev *fd_dev = dev->dev_ptr;
- loff_t start = cmd->t_task_lba *
- dev->se_sub_dev->se_dev_attrib.block_size;
- loff_t end = start + cmd->data_length;
- int ret;
-
- pr_debug("FILEIO: FUA WRITE LBA: %llu, bytes: %u\n",
- cmd->t_task_lba, cmd->data_length);
-
- ret = vfs_fsync_range(fd_dev->fd_file, start, end, 1);
- if (ret != 0)
- pr_err("FILEIO: vfs_fsync_range() failed: %d\n", ret);
-}
-
static int fd_execute_cmd(struct se_cmd *cmd, struct scatterlist *sgl,
u32 sgl_nents, enum dma_data_direction data_direction)
{
ret = fd_do_readv(cmd, sgl, sgl_nents);
} else {
ret = fd_do_writev(cmd, sgl, sgl_nents);
-
+ /*
+ * Perform implict vfs_fsync_range() for fd_do_writev() ops
+ * for SCSI WRITEs with Forced Unit Access (FUA) set.
+ * Allow this to happen independent of WCE=0 setting.
+ */
if (ret > 0 &&
- dev->se_sub_dev->se_dev_attrib.emulate_write_cache > 0 &&
dev->se_sub_dev->se_dev_attrib.emulate_fua_write > 0 &&
(cmd->se_cmd_flags & SCF_FUA)) {
- /*
- * We might need to be a bit smarter here
- * and return some sense data to let the initiator
- * know the FUA WRITE cache sync failed..?
- */
- fd_emulate_write_fua(cmd);
- }
+ struct fd_dev *fd_dev = dev->dev_ptr;
+ loff_t start = cmd->t_task_lba *
+ dev->se_sub_dev->se_dev_attrib.block_size;
+ loff_t end = start + cmd->data_length;
+ vfs_fsync_range(fd_dev->fd_file, start, end, 1);
+ }
}
if (ret < 0) {
static match_table_t tokens = {
{Opt_fd_dev_name, "fd_dev_name=%s"},
{Opt_fd_dev_size, "fd_dev_size=%s"},
- {Opt_fd_buffered_io, "fd_buffered_io=%d"},
{Opt_err, NULL}
};
struct fd_dev *fd_dev = se_dev->se_dev_su_ptr;
char *orig, *ptr, *arg_p, *opts;
substring_t args[MAX_OPT_ARGS];
- int ret = 0, arg, token;
+ int ret = 0, token;
opts = kstrdup(page, GFP_KERNEL);
if (!opts)
" bytes\n", fd_dev->fd_dev_size);
fd_dev->fbd_flags |= FBDF_HAS_SIZE;
break;
- case Opt_fd_buffered_io:
- match_int(args, &arg);
- if (arg != 1) {
- pr_err("bogus fd_buffered_io=%d value\n", arg);
- ret = -EINVAL;
- goto out;
- }
-
- pr_debug("FILEIO: Using buffered I/O"
- " operations for struct fd_dev\n");
-
- fd_dev->fbd_flags |= FDBD_USE_BUFFERED_IO;
- break;
default:
break;
}
ssize_t bl = 0;
bl = sprintf(b + bl, "TCM FILEIO ID: %u", fd_dev->fd_dev_id);
- bl += sprintf(b + bl, " File: %s Size: %llu Mode: %s\n",
- fd_dev->fd_dev_name, fd_dev->fd_dev_size,
- (fd_dev->fbd_flags & FDBD_USE_BUFFERED_IO) ?
- "Buffered" : "Synchronous");
+ bl += sprintf(b + bl, " File: %s Size: %llu Mode: O_DSYNC\n",
+ fd_dev->fd_dev_name, fd_dev->fd_dev_size);
return bl;
}
#define FBDF_HAS_PATH 0x01
#define FBDF_HAS_SIZE 0x02
-#define FDBD_USE_BUFFERED_IO 0x04
struct fd_dev {
u32 fbd_flags;
if (IS_ERR(file) || !file || !file->f_dentry) {
pr_err("filp_open(%s) for APTPL metadata"
" failed\n", path);
- return (PTR_ERR(file) < 0 ? PTR_ERR(file) : -ENOENT);
+ return IS_ERR(file) ? PTR_ERR(file) : -ENOENT;
}
iov[0].iov_base = &buf[0];
" SPC-2 reservation is held, returning"
" RESERVATION_CONFLICT\n");
cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT;
- ret = EINVAL;
+ ret = -EINVAL;
goto out;
}
*/
if (!cmd->se_sess) {
cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
- return -EINVAL;
+ ret = -EINVAL;
+ goto out;
}
if (cmd->data_length < 24) {
}
EXPORT_SYMBOL(transport_register_session);
-static void target_release_session(struct kref *kref)
+void target_release_session(struct kref *kref)
{
struct se_session *se_sess = container_of(kref,
struct se_session, sess_kref);
void target_put_session(struct se_session *se_sess)
{
+ struct se_portal_group *tpg = se_sess->se_tpg;
+
+ if (tpg->se_tpg_tfo->put_session != NULL) {
+ tpg->se_tpg_tfo->put_session(se_sess);
+ return;
+ }
kref_put(&se_sess->sess_kref, target_release_session);
}
EXPORT_SYMBOL(target_put_session);
{
struct ft_cmd *cmd = container_of(se_cmd, struct ft_cmd, se_cmd);
+ if (cmd->aborted)
+ return ~0;
return fc_seq_exch(cmd->seq)->rxid;
}
struct ft_tport *tport;
int i;
- tport = rcu_dereference(lport->prov[FC_TYPE_FCP]);
+ tport = rcu_dereference_protected(lport->prov[FC_TYPE_FCP],
+ lockdep_is_held(&ft_lport_lock));
if (tport && tport->tpg)
return tport;
bool "SPEAr thermal sensor driver"
depends on THERMAL
depends on PLAT_SPEAR
+ depends on OF
help
Enable this to plug the SPEAr thermal sensor driver into the Linux
thermal framework
#include <linux/err.h>
#include <linux/io.h>
#include <linux/kernel.h>
+#include <linux/of.h>
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <linux/platform_data/spear_thermal.h>
#include <linux/thermal.h>
#define MD_FACTOR 1000
{
struct thermal_zone_device *spear_thermal = NULL;
struct spear_thermal_dev *stdev;
- struct spear_thermal_pdata *pdata;
- int ret = 0;
+ struct device_node *np = pdev->dev.of_node;
struct resource *stres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ int ret = 0, val;
+
+ if (!np || !of_property_read_u32(np, "st,thermal-flags", &val)) {
+ dev_err(&pdev->dev, "Failed: DT Pdata not passed\n");
+ return -EINVAL;
+ }
if (!stres) {
dev_err(&pdev->dev, "memory resource missing\n");
return -ENODEV;
}
- pdata = dev_get_platdata(&pdev->dev);
- if (!pdata) {
- dev_err(&pdev->dev, "platform data is NULL\n");
- return -EINVAL;
- }
-
stdev = devm_kzalloc(&pdev->dev, sizeof(*stdev), GFP_KERNEL);
if (!stdev) {
dev_err(&pdev->dev, "kzalloc fail\n");
goto put_clk;
}
- stdev->flags = pdata->thermal_flags;
+ stdev->flags = val;
writel_relaxed(stdev->flags, stdev->thermal_base);
- spear_thermal = thermal_zone_device_register("spear_thermal", 0,
+ spear_thermal = thermal_zone_device_register("spear_thermal", 0, 0,
stdev, &ops, 0, 0, 0, 0);
if (IS_ERR(spear_thermal)) {
dev_err(&pdev->dev, "thermal zone device is NULL\n");
return 0;
}
+static const struct of_device_id spear_thermal_id_table[] = {
+ { .compatible = "st,thermal-spear1340" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, spear_thermal_id_table);
+
static struct platform_driver spear_thermal_driver = {
.probe = spear_thermal_probe,
.remove = spear_thermal_exit,
.name = "spear_thermal",
.owner = THIS_MODULE,
.pm = &spear_thermal_pm_ops,
+ .of_match_table = of_match_ptr(spear_thermal_id_table),
},
};
}
}
+static ssize_t
+trip_point_temp_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct thermal_zone_device *tz = to_thermal_zone(dev);
+ int trip, ret;
+ unsigned long temperature;
+
+ if (!tz->ops->set_trip_temp)
+ return -EPERM;
+
+ if (!sscanf(attr->attr.name, "trip_point_%d_temp", &trip))
+ return -EINVAL;
+
+ if (kstrtoul(buf, 10, &temperature))
+ return -EINVAL;
+
+ ret = tz->ops->set_trip_temp(tz, trip, temperature);
+
+ return ret ? ret : count;
+}
+
static ssize_t
trip_point_temp_show(struct device *dev, struct device_attribute *attr,
char *buf)
return sprintf(buf, "%ld\n", temperature);
}
+static ssize_t
+trip_point_hyst_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct thermal_zone_device *tz = to_thermal_zone(dev);
+ int trip, ret;
+ unsigned long temperature;
+
+ if (!tz->ops->set_trip_hyst)
+ return -EPERM;
+
+ if (!sscanf(attr->attr.name, "trip_point_%d_hyst", &trip))
+ return -EINVAL;
+
+ if (kstrtoul(buf, 10, &temperature))
+ return -EINVAL;
+
+ /*
+ * We are not doing any check on the 'temperature' value
+ * here. The driver implementing 'set_trip_hyst' has to
+ * take care of this.
+ */
+ ret = tz->ops->set_trip_hyst(tz, trip, temperature);
+
+ return ret ? ret : count;
+}
+
+static ssize_t
+trip_point_hyst_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct thermal_zone_device *tz = to_thermal_zone(dev);
+ int trip, ret;
+ unsigned long temperature;
+
+ if (!tz->ops->get_trip_hyst)
+ return -EPERM;
+
+ if (!sscanf(attr->attr.name, "trip_point_%d_hyst", &trip))
+ return -EINVAL;
+
+ ret = tz->ops->get_trip_hyst(tz, trip, &temperature);
+
+ return ret ? ret : sprintf(buf, "%ld\n", temperature);
+}
+
static ssize_t
passive_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
static DEVICE_ATTR(mode, 0644, mode_show, mode_store);
static DEVICE_ATTR(passive, S_IRUGO | S_IWUSR, passive_show, passive_store);
-static struct device_attribute trip_point_attrs[] = {
- __ATTR(trip_point_0_type, 0444, trip_point_type_show, NULL),
- __ATTR(trip_point_0_temp, 0444, trip_point_temp_show, NULL),
- __ATTR(trip_point_1_type, 0444, trip_point_type_show, NULL),
- __ATTR(trip_point_1_temp, 0444, trip_point_temp_show, NULL),
- __ATTR(trip_point_2_type, 0444, trip_point_type_show, NULL),
- __ATTR(trip_point_2_temp, 0444, trip_point_temp_show, NULL),
- __ATTR(trip_point_3_type, 0444, trip_point_type_show, NULL),
- __ATTR(trip_point_3_temp, 0444, trip_point_temp_show, NULL),
- __ATTR(trip_point_4_type, 0444, trip_point_type_show, NULL),
- __ATTR(trip_point_4_temp, 0444, trip_point_temp_show, NULL),
- __ATTR(trip_point_5_type, 0444, trip_point_type_show, NULL),
- __ATTR(trip_point_5_temp, 0444, trip_point_temp_show, NULL),
- __ATTR(trip_point_6_type, 0444, trip_point_type_show, NULL),
- __ATTR(trip_point_6_temp, 0444, trip_point_temp_show, NULL),
- __ATTR(trip_point_7_type, 0444, trip_point_type_show, NULL),
- __ATTR(trip_point_7_temp, 0444, trip_point_temp_show, NULL),
- __ATTR(trip_point_8_type, 0444, trip_point_type_show, NULL),
- __ATTR(trip_point_8_temp, 0444, trip_point_temp_show, NULL),
- __ATTR(trip_point_9_type, 0444, trip_point_type_show, NULL),
- __ATTR(trip_point_9_temp, 0444, trip_point_temp_show, NULL),
- __ATTR(trip_point_10_type, 0444, trip_point_type_show, NULL),
- __ATTR(trip_point_10_temp, 0444, trip_point_temp_show, NULL),
- __ATTR(trip_point_11_type, 0444, trip_point_type_show, NULL),
- __ATTR(trip_point_11_temp, 0444, trip_point_temp_show, NULL),
-};
-
/* sys I/F for cooling device */
#define to_cooling_device(_dev) \
container_of(_dev, struct thermal_cooling_device, device)
}
EXPORT_SYMBOL(thermal_zone_device_update);
+/**
+ * create_trip_attrs - create attributes for trip points
+ * @tz: the thermal zone device
+ * @mask: Writeable trip point bitmap.
+ */
+static int create_trip_attrs(struct thermal_zone_device *tz, int mask)
+{
+ int indx;
+ int size = sizeof(struct thermal_attr) * tz->trips;
+
+ tz->trip_type_attrs = kzalloc(size, GFP_KERNEL);
+ if (!tz->trip_type_attrs)
+ return -ENOMEM;
+
+ tz->trip_temp_attrs = kzalloc(size, GFP_KERNEL);
+ if (!tz->trip_temp_attrs) {
+ kfree(tz->trip_type_attrs);
+ return -ENOMEM;
+ }
+
+ if (tz->ops->get_trip_hyst) {
+ tz->trip_hyst_attrs = kzalloc(size, GFP_KERNEL);
+ if (!tz->trip_hyst_attrs) {
+ kfree(tz->trip_type_attrs);
+ kfree(tz->trip_temp_attrs);
+ return -ENOMEM;
+ }
+ }
+
+
+ for (indx = 0; indx < tz->trips; indx++) {
+ /* create trip type attribute */
+ snprintf(tz->trip_type_attrs[indx].name, THERMAL_NAME_LENGTH,
+ "trip_point_%d_type", indx);
+
+ sysfs_attr_init(&tz->trip_type_attrs[indx].attr.attr);
+ tz->trip_type_attrs[indx].attr.attr.name =
+ tz->trip_type_attrs[indx].name;
+ tz->trip_type_attrs[indx].attr.attr.mode = S_IRUGO;
+ tz->trip_type_attrs[indx].attr.show = trip_point_type_show;
+
+ device_create_file(&tz->device,
+ &tz->trip_type_attrs[indx].attr);
+
+ /* create trip temp attribute */
+ snprintf(tz->trip_temp_attrs[indx].name, THERMAL_NAME_LENGTH,
+ "trip_point_%d_temp", indx);
+
+ sysfs_attr_init(&tz->trip_temp_attrs[indx].attr.attr);
+ tz->trip_temp_attrs[indx].attr.attr.name =
+ tz->trip_temp_attrs[indx].name;
+ tz->trip_temp_attrs[indx].attr.attr.mode = S_IRUGO;
+ tz->trip_temp_attrs[indx].attr.show = trip_point_temp_show;
+ if (mask & (1 << indx)) {
+ tz->trip_temp_attrs[indx].attr.attr.mode |= S_IWUSR;
+ tz->trip_temp_attrs[indx].attr.store =
+ trip_point_temp_store;
+ }
+
+ device_create_file(&tz->device,
+ &tz->trip_temp_attrs[indx].attr);
+
+ /* create Optional trip hyst attribute */
+ if (!tz->ops->get_trip_hyst)
+ continue;
+ snprintf(tz->trip_hyst_attrs[indx].name, THERMAL_NAME_LENGTH,
+ "trip_point_%d_hyst", indx);
+
+ sysfs_attr_init(&tz->trip_hyst_attrs[indx].attr.attr);
+ tz->trip_hyst_attrs[indx].attr.attr.name =
+ tz->trip_hyst_attrs[indx].name;
+ tz->trip_hyst_attrs[indx].attr.attr.mode = S_IRUGO;
+ tz->trip_hyst_attrs[indx].attr.show = trip_point_hyst_show;
+ if (tz->ops->set_trip_hyst) {
+ tz->trip_hyst_attrs[indx].attr.attr.mode |= S_IWUSR;
+ tz->trip_hyst_attrs[indx].attr.store =
+ trip_point_hyst_store;
+ }
+
+ device_create_file(&tz->device,
+ &tz->trip_hyst_attrs[indx].attr);
+ }
+ return 0;
+}
+
+static void remove_trip_attrs(struct thermal_zone_device *tz)
+{
+ int indx;
+
+ for (indx = 0; indx < tz->trips; indx++) {
+ device_remove_file(&tz->device,
+ &tz->trip_type_attrs[indx].attr);
+ device_remove_file(&tz->device,
+ &tz->trip_temp_attrs[indx].attr);
+ if (tz->ops->get_trip_hyst)
+ device_remove_file(&tz->device,
+ &tz->trip_hyst_attrs[indx].attr);
+ }
+ kfree(tz->trip_type_attrs);
+ kfree(tz->trip_temp_attrs);
+ kfree(tz->trip_hyst_attrs);
+}
+
/**
* thermal_zone_device_register - register a new thermal zone device
* @type: the thermal zone device type
* @trips: the number of trip points the thermal zone support
+ * @mask: a bit string indicating the writeablility of trip points
* @devdata: private device data
* @ops: standard thermal zone device callbacks
* @tc1: thermal coefficient 1 for passive calculations
* section 11.1.5.1 of the ACPI specification 3.0.
*/
struct thermal_zone_device *thermal_zone_device_register(char *type,
- int trips, void *devdata,
+ int trips, int mask, void *devdata,
const struct thermal_zone_device_ops *ops,
int tc1, int tc2, int passive_delay, int polling_delay)
{
if (strlen(type) >= THERMAL_NAME_LENGTH)
return ERR_PTR(-EINVAL);
- if (trips > THERMAL_MAX_TRIPS || trips < 0)
+ if (trips > THERMAL_MAX_TRIPS || trips < 0 || mask >> trips)
return ERR_PTR(-EINVAL);
if (!ops || !ops->get_temp)
goto unregister;
}
+ result = create_trip_attrs(tz, mask);
+ if (result)
+ goto unregister;
+
for (count = 0; count < trips; count++) {
- result = device_create_file(&tz->device,
- &trip_point_attrs[count * 2]);
- if (result)
- break;
- result = device_create_file(&tz->device,
- &trip_point_attrs[count * 2 + 1]);
- if (result)
- goto unregister;
tz->ops->get_trip_type(tz, count, &trip_type);
if (trip_type == THERMAL_TRIP_PASSIVE)
passive = 1;
{
struct thermal_cooling_device *cdev;
struct thermal_zone_device *pos = NULL;
- int count;
if (!tz)
return;
device_remove_file(&tz->device, &dev_attr_temp);
if (tz->ops->get_mode)
device_remove_file(&tz->device, &dev_attr_mode);
+ remove_trip_attrs(tz);
- for (count = 0; count < tz->trips; count++) {
- device_remove_file(&tz->device,
- &trip_point_attrs[count * 2]);
- device_remove_file(&tz->device,
- &trip_point_attrs[count * 2 + 1]);
- }
thermal_remove_hwmon_sysfs(tz);
release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id);
idr_destroy(&tz->idr);
}
#ifdef CONFIG_PPC_EARLY_DEBUG_OPAL_RAW
-void __init udbg_init_debug_opal(void)
+void __init udbg_init_debug_opal_raw(void)
{
u32 index = CONFIG_PPC_EARLY_DEBUG_OPAL_VTERMNO;
hvc_opal_privs[index] = &hvc_opal_boot_priv;
/* already configured */
if (info->intf != NULL)
return 0;
-
+ /*
+ * If the toolstack (or the hypervisor) hasn't set these values, the
+ * default value is 0. Even though mfn = 0 and evtchn = 0 are
+ * theoretically correct values, in practice they never are and they
+ * mean that a legacy toolstack hasn't initialized the pv console correctly.
+ */
r = hvm_get_parameter(HVM_PARAM_CONSOLE_EVTCHN, &v);
- if (r < 0) {
- kfree(info);
- return -ENODEV;
- }
+ if (r < 0 || v == 0)
+ goto err;
info->evtchn = v;
- hvm_get_parameter(HVM_PARAM_CONSOLE_PFN, &v);
- if (r < 0) {
- kfree(info);
- return -ENODEV;
- }
+ v = 0;
+ r = hvm_get_parameter(HVM_PARAM_CONSOLE_PFN, &v);
+ if (r < 0 || v == 0)
+ goto err;
mfn = v;
info->intf = ioremap(mfn << PAGE_SHIFT, PAGE_SIZE);
- if (info->intf == NULL) {
- kfree(info);
- return -ENODEV;
- }
+ if (info->intf == NULL)
+ goto err;
info->vtermno = HVC_COOKIE;
spin_lock(&xencons_lock);
spin_unlock(&xencons_lock);
return 0;
+err:
+ kfree(info);
+ return -ENODEV;
}
static int xen_pv_console_init(void)
/**
* serial8250_register_8250_port - register a serial port
- * @port: serial port template
+ * @up: serial port template
*
* Configure the serial port specified by the request. If the
* port exists and is in use, it is hung up and unregistered
struct uart_amba_port {
struct uart_port port;
struct clk *clk;
+ /* Two optional pin states - default & sleep */
+ struct pinctrl *pinctrl;
+ struct pinctrl_state *pins_default;
+ struct pinctrl_state *pins_sleep;
const struct vendor_data *vendor;
unsigned int dmacr; /* dma control reg */
unsigned int im; /* interrupt mask */
unsigned int cr;
int retval;
+ /* Optionaly enable pins to be muxed in and configured */
+ if (!IS_ERR(uap->pins_default)) {
+ retval = pinctrl_select_state(uap->pinctrl, uap->pins_default);
+ if (retval)
+ dev_err(port->dev,
+ "could not set default pins\n");
+ }
+
retval = clk_prepare(uap->clk);
if (retval)
goto out;
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int cr;
+ int retval;
/*
* disable all interrupts
*/
clk_disable(uap->clk);
clk_unprepare(uap->clk);
+ /* Optionally let pins go into sleep states */
+ if (!IS_ERR(uap->pins_sleep)) {
+ retval = pinctrl_select_state(uap->pinctrl, uap->pins_sleep);
+ if (retval)
+ dev_err(port->dev,
+ "could not set pins to sleep state\n");
+ }
+
if (uap->port.dev->platform_data) {
struct amba_pl011_data *plat;
if (!uap)
return -ENODEV;
+ /* Allow pins to be muxed in and configured */
+ if (!IS_ERR(uap->pins_default)) {
+ ret = pinctrl_select_state(uap->pinctrl, uap->pins_default);
+ if (ret)
+ dev_err(uap->port.dev,
+ "could not set default pins\n");
+ }
+
ret = clk_prepare(uap->clk);
if (ret)
return ret;
{
struct uart_amba_port *uap;
struct vendor_data *vendor = id->data;
- struct pinctrl *pinctrl;
void __iomem *base;
int i, ret;
goto free;
}
- pinctrl = devm_pinctrl_get_select_default(&dev->dev);
- if (IS_ERR(pinctrl)) {
- ret = PTR_ERR(pinctrl);
+ uap->pinctrl = devm_pinctrl_get(&dev->dev);
+ if (IS_ERR(uap->pinctrl)) {
+ ret = PTR_ERR(uap->pinctrl);
goto unmap;
}
+ uap->pins_default = pinctrl_lookup_state(uap->pinctrl,
+ PINCTRL_STATE_DEFAULT);
+ if (IS_ERR(uap->pins_default))
+ dev_err(&dev->dev, "could not get default pinstate\n");
+
+ uap->pins_sleep = pinctrl_lookup_state(uap->pinctrl,
+ PINCTRL_STATE_SLEEP);
+ if (IS_ERR(uap->pins_sleep))
+ dev_dbg(&dev->dev, "could not get sleep pinstate\n");
uap->clk = clk_get(&dev->dev, NULL);
if (IS_ERR(uap->clk)) {
spin_unlock_irqrestore(&up->port.lock, flags);
}
-#if defined(CONFIG_SERIAL_TXX9_CONSOLE) || (CONFIG_CONSOLE_POLL)
+#if defined(CONFIG_SERIAL_TXX9_CONSOLE) || defined(CONFIG_CONSOLE_POLL)
/*
* Wait for transmitter & holding register to empty
*/
return 0;
}
+static void sci_cleanup_single(struct sci_port *port)
+{
+ sci_free_gpios(port);
+
+ clk_put(port->iclk);
+ clk_put(port->fclk);
+
+ pm_runtime_disable(port->port.dev);
+}
+
#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
static void serial_console_putchar(struct uart_port *port, int ch)
{
cpufreq_unregister_notifier(&port->freq_transition,
CPUFREQ_TRANSITION_NOTIFIER);
- sci_free_gpios(port);
-
uart_remove_one_port(&sci_uart_driver, &port->port);
- clk_put(port->iclk);
- clk_put(port->fclk);
+ sci_cleanup_single(port);
- pm_runtime_disable(&dev->dev);
return 0;
}
index+1, SCI_NPORTS);
dev_notice(&dev->dev, "Consider bumping "
"CONFIG_SERIAL_SH_SCI_NR_UARTS!\n");
- return 0;
+ return -EINVAL;
}
ret = sci_init_single(dev, sciport, index, p);
if (ret)
return ret;
- return uart_add_one_port(&sci_uart_driver, &sciport->port);
+ ret = uart_add_one_port(&sci_uart_driver, &sciport->port);
+ if (ret) {
+ sci_cleanup_single(sciport);
+ return ret;
+ }
+
+ return 0;
}
static int __devinit sci_probe(struct platform_device *dev)
ret = sci_probe_single(dev, dev->id, p, sp);
if (ret)
- goto err_unreg;
+ return ret;
sp->freq_transition.notifier_call = sci_notifier;
ret = cpufreq_register_notifier(&sp->freq_transition,
CPUFREQ_TRANSITION_NOTIFIER);
- if (unlikely(ret < 0))
- goto err_unreg;
+ if (unlikely(ret < 0)) {
+ sci_cleanup_single(sp);
+ return ret;
+ }
#ifdef CONFIG_SH_STANDARD_BIOS
sh_bios_gdb_detach();
#endif
return 0;
-
-err_unreg:
- sci_remove(dev);
- return ret;
}
static int sci_suspend(struct device *dev)
obj-$(CONFIG_USB_SERIAL) += serial/
obj-$(CONFIG_USB) += misc/
-obj-$(CONFIG_USB) += phy/
+obj-$(CONFIG_USB_COMMON) += phy/
obj-$(CONFIG_EARLY_PRINTK_DBGP) += early/
obj-$(CONFIG_USB_ATM) += atm/
usb_autopm_put_interface(acm->control);
+ /*
+ * Unthrottle device in case the TTY was closed while throttled.
+ */
+ spin_lock_irq(&acm->read_lock);
+ acm->throttled = 0;
+ acm->throttle_req = 0;
+ spin_unlock_irq(&acm->read_lock);
+
if (acm_submit_read_urbs(acm, GFP_KERNEL))
goto error_submit_read_urbs;
.bInterfaceSubClass = 1,
.bInterfaceProtocol = 9, /* NOTE: CDC ECM control interface! */
},
+ {
+ /* Vodafone/Huawei K5005 (12d1:14c8) and similar modems */
+ .match_flags = USB_DEVICE_ID_MATCH_VENDOR |
+ USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = HUAWEI_VENDOR_ID,
+ .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 57, /* NOTE: CDC ECM control interface! */
+ },
{ }
};
goto retry;
}
if (!desc->reslength) { /* zero length read */
+ dev_dbg(&desc->intf->dev, "%s: zero length - clearing WDM_READ\n", __func__);
+ clear_bit(WDM_READ, &desc->flags);
spin_unlock_irq(&desc->iuspin);
goto retry;
}
pci_save_state(pci_dev);
- /*
- * Some systems crash if an EHCI controller is in D3 during
- * a sleep transition. We have to leave such controllers in D0.
- */
- if (hcd->broken_pci_sleep) {
- dev_dbg(dev, "Staying in PCI D0\n");
- return retval;
- }
-
/* If the root hub is dead rather than suspended, disallow remote
* wakeup. usb_hc_died() should ensure that both hosts are marked as
* dying, so we only need to check the primary roothub.
static int hub_port_reset(struct usb_hub *hub, int port1,
struct usb_device *udev, unsigned int delay, bool warm);
-/* Is a USB 3.0 port in the Inactive state? */
-static bool hub_port_inactive(struct usb_hub *hub, u16 portstatus)
+/* Is a USB 3.0 port in the Inactive or Complinance Mode state?
+ * Port worm reset is required to recover
+ */
+static bool hub_port_warm_reset_required(struct usb_hub *hub, u16 portstatus)
{
return hub_is_superspeed(hub->hdev) &&
- (portstatus & USB_PORT_STAT_LINK_STATE) ==
- USB_SS_PORT_LS_SS_INACTIVE;
+ (((portstatus & USB_PORT_STAT_LINK_STATE) ==
+ USB_SS_PORT_LS_SS_INACTIVE) ||
+ ((portstatus & USB_PORT_STAT_LINK_STATE) ==
+ USB_SS_PORT_LS_COMP_MOD)) ;
}
static int hub_port_wait_reset(struct usb_hub *hub, int port1,
*
* See https://bugzilla.kernel.org/show_bug.cgi?id=41752
*/
- if (hub_port_inactive(hub, portstatus)) {
+ if (hub_port_warm_reset_required(hub, portstatus)) {
int ret;
if ((portchange & USB_PORT_STAT_C_CONNECTION))
return 0;
udev->lpm_disable_count++;
- if ((udev->u1_params.timeout == 0 && udev->u1_params.timeout == 0))
+ if ((udev->u1_params.timeout == 0 && udev->u2_params.timeout == 0))
return 0;
/* If LPM is enabled, attempt to disable it. */
/* Warm reset a USB3 protocol port if it's in
* SS.Inactive state.
*/
- if (hub_is_superspeed(hub->hdev) &&
- (portstatus & USB_PORT_STAT_LINK_STATE)
- == USB_SS_PORT_LS_SS_INACTIVE) {
+ if (hub_port_warm_reset_required(hub, portstatus)) {
dev_dbg(hub_dev, "warm reset port %d\n", i);
hub_port_reset(hub, i, NULL,
HUB_BH_RESET_TIME, true);
intfc = cp->intf_cache[i];
intf->altsetting = intfc->altsetting;
intf->num_altsetting = intfc->num_altsetting;
- intf->intf_assoc = find_iad(dev, cp, i);
kref_get(&intfc->ref);
alt = usb_altnum_to_altsetting(intf, 0);
if (!alt)
alt = &intf->altsetting[0];
+ intf->intf_assoc =
+ find_iad(dev, cp, alt->desc.bInterfaceNumber);
intf->cur_altsetting = alt;
usb_enable_interface(dev, intf, true);
intf->dev.parent = &dev->dev;
if (r == req) {
/* wait until it is processed */
dwc3_stop_active_transfer(dwc, dep->number);
- goto out0;
+ goto out1;
}
dev_err(dwc->dev, "request %p was not queued to %s\n",
request, ep->name);
goto out0;
}
+out1:
/* giveback the request */
dwc3_gadget_giveback(dep, req, -ECONNRESET);
spin_lock_irqsave(&ep->udc->lock, flags);
- if (ep->ep.desc) {
- spin_unlock_irqrestore(&ep->udc->lock, flags);
- DBG(DBG_ERR, "ep%d already enabled\n", ep->index);
- return -EBUSY;
- }
-
ep->ep.desc = desc;
ep->ep.maxpacket = maxpacket;
ep = container_of(_ep, struct qe_ep, ep);
/* catch various bogus parameters */
- if (!_ep || !desc || ep->ep.desc || _ep->name == ep_name[0] ||
+ if (!_ep || !desc || _ep->name == ep_name[0] ||
(desc->bDescriptorType != USB_DT_ENDPOINT))
return -EINVAL;
#define USB_BUSMODE_DTB 0x02
/* Endpoint basic handle */
-#define ep_index(EP) ((EP)->desc->bEndpointAddress & 0xF)
+#define ep_index(EP) ((EP)->ep.desc->bEndpointAddress & 0xF)
#define ep_maxpacket(EP) ((EP)->ep.maxpacket)
#define ep_is_in(EP) ((ep_index(EP) == 0) ? (EP->udc->ep0_dir == \
- USB_DIR_IN) : ((EP)->desc->bEndpointAddress \
+ USB_DIR_IN) : ((EP)->ep.desc->bEndpointAddress \
& USB_DIR_IN) == USB_DIR_IN)
/* ep0 transfer state */
ep = container_of(_ep, struct fsl_ep, ep);
/* catch various bogus parameters */
- if (!_ep || !desc || ep->ep.desc
+ if (!_ep || !desc
|| (desc->bDescriptorType != USB_DT_ENDPOINT))
return -EINVAL;
/* for ep0: the desc defined here;
* for other eps, gadget layer called ep_enable with defined desc
*/
- udc_controller->eps[0].desc = &fsl_ep0_desc;
+ udc_controller->eps[0].ep.desc = &fsl_ep0_desc;
udc_controller->eps[0].ep.maxpacket = USB_MAX_CTRL_PAYLOAD;
/* setup the udc->eps[] for non-control endpoints and link
/*
* ### internal used help routines.
*/
-#define ep_index(EP) ((EP)->desc->bEndpointAddress&0xF)
+#define ep_index(EP) ((EP)->ep.desc->bEndpointAddress&0xF)
#define ep_maxpacket(EP) ((EP)->ep.maxpacket)
#define ep_is_in(EP) ( (ep_index(EP) == 0) ? (EP->udc->ep0_dir == \
- USB_DIR_IN ):((EP)->desc->bEndpointAddress \
+ USB_DIR_IN) : ((EP)->ep.desc->bEndpointAddress \
& USB_DIR_IN)==USB_DIR_IN)
#define get_ep_by_pipe(udc, pipe) ((pipe == 1)? &udc->eps[0]: \
&udc->eps[pipe])
unsigned long flags;
ep = container_of(_ep, struct goku_ep, ep);
- if (!_ep || !desc || ep->ep.desc
+ if (!_ep || !desc
|| desc->bDescriptorType != USB_DT_ENDPOINT)
return -EINVAL;
dev = ep->dev;
#include <mach/irqs.h>
#include <mach/board.h>
#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+#include <linux/debugfs.h>
#include <linux/seq_file.h>
#endif
ep = container_of(_ep, struct mv_ep, ep);
udc = ep->udc;
- if (!_ep || !desc || ep->ep.desc
+ if (!_ep || !desc
|| desc->bDescriptorType != USB_DT_ENDPOINT)
return -EINVAL;
u16 maxp;
/* catch various bogus parameters */
- if (!_ep || !desc || ep->ep.desc
+ if (!_ep || !desc
|| desc->bDescriptorType != USB_DT_ENDPOINT
|| ep->bEndpointAddress != desc->bEndpointAddress
|| ep->maxpacket < usb_endpoint_maxp(desc)) {
struct pxa25x_udc *dev;
ep = container_of (_ep, struct pxa25x_ep, ep);
- if (!_ep || !desc || ep->ep.desc || _ep->name == ep0name
+ if (!_ep || !desc || _ep->name == ep0name
|| desc->bDescriptorType != USB_DT_ENDPOINT
|| ep->bEndpointAddress != desc->bEndpointAddress
|| ep->fifo_size < usb_endpoint_maxp (desc)) {
u32 ecr = 0;
hsep = our_ep(_ep);
- if (!_ep || !desc || hsep->ep.desc || _ep->name == ep0name
+ if (!_ep || !desc || _ep->name == ep0name
|| desc->bDescriptorType != USB_DT_ENDPOINT
|| hsep->bEndpointAddress != desc->bEndpointAddress
|| ep_maxpacket(hsep) < usb_endpoint_maxp(desc))
ep = to_s3c2410_ep(_ep);
- if (!_ep || !desc || ep->ep.desc
+ if (!_ep || !desc
|| _ep->name == ep0name
|| desc->bDescriptorType != USB_DT_ENDPOINT)
return -EINVAL;
hw = ehci->async->hw;
hw->hw_next = QH_NEXT(ehci, ehci->async->qh_dma);
hw->hw_info1 = cpu_to_hc32(ehci, QH_HEAD);
+#if defined(CONFIG_PPC_PS3)
hw->hw_info1 |= cpu_to_hc32(ehci, (1 << 7)); /* I = 1 */
+#endif
hw->hw_token = cpu_to_hc32(ehci, QTD_STS_HALT);
hw->hw_qtd_next = EHCI_LIST_END(ehci);
ehci->async->qh_state = QH_STATE_LINKED;
#include <linux/regulator/consumer.h>
#include <linux/pm_runtime.h>
#include <linux/gpio.h>
+#include <linux/clk.h>
/* EHCI Register Set */
#define EHCI_INSNREG04 (0xA0)
#define EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT 8
#define EHCI_INSNREG05_ULPI_WRDATA_SHIFT 0
+/* Errata i693 */
+static struct clk *utmi_p1_fck;
+static struct clk *utmi_p2_fck;
+static struct clk *xclk60mhsp1_ck;
+static struct clk *xclk60mhsp2_ck;
+static struct clk *usbhost_p1_fck;
+static struct clk *usbhost_p2_fck;
+static struct clk *init_60m_fclk;
+
/*-------------------------------------------------------------------------*/
static const struct hc_driver ehci_omap_hc_driver;
return __raw_readl(base + reg);
}
+/* Erratum i693 workaround sequence */
+static void omap_ehci_erratum_i693(struct ehci_hcd *ehci)
+{
+ int ret = 0;
+
+ /* Switch to the internal 60 MHz clock */
+ ret = clk_set_parent(utmi_p1_fck, init_60m_fclk);
+ if (ret != 0)
+ ehci_err(ehci, "init_60m_fclk set parent"
+ "failed error:%d\n", ret);
+
+ ret = clk_set_parent(utmi_p2_fck, init_60m_fclk);
+ if (ret != 0)
+ ehci_err(ehci, "init_60m_fclk set parent"
+ "failed error:%d\n", ret);
+
+ clk_enable(usbhost_p1_fck);
+ clk_enable(usbhost_p2_fck);
+
+ /* Wait 1ms and switch back to the external clock */
+ mdelay(1);
+ ret = clk_set_parent(utmi_p1_fck, xclk60mhsp1_ck);
+ if (ret != 0)
+ ehci_err(ehci, "xclk60mhsp1_ck set parent"
+ "failed error:%d\n", ret);
+
+ ret = clk_set_parent(utmi_p2_fck, xclk60mhsp2_ck);
+ if (ret != 0)
+ ehci_err(ehci, "xclk60mhsp2_ck set parent"
+ "failed error:%d\n", ret);
+
+ clk_disable(usbhost_p1_fck);
+ clk_disable(usbhost_p2_fck);
+}
+
static void omap_ehci_soft_phy_reset(struct platform_device *pdev, u8 port)
{
struct usb_hcd *hcd = dev_get_drvdata(&pdev->dev);
}
}
+static int omap_ehci_hub_control(
+ struct usb_hcd *hcd,
+ u16 typeReq,
+ u16 wValue,
+ u16 wIndex,
+ char *buf,
+ u16 wLength
+)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ u32 __iomem *status_reg = &ehci->regs->port_status[
+ (wIndex & 0xff) - 1];
+ u32 temp;
+ unsigned long flags;
+ int retval = 0;
+
+ spin_lock_irqsave(&ehci->lock, flags);
+
+ if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND) {
+ temp = ehci_readl(ehci, status_reg);
+ if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) {
+ retval = -EPIPE;
+ goto done;
+ }
+
+ temp &= ~PORT_WKCONN_E;
+ temp |= PORT_WKDISC_E | PORT_WKOC_E;
+ ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
+
+ omap_ehci_erratum_i693(ehci);
+
+ set_bit((wIndex & 0xff) - 1, &ehci->suspended_ports);
+ goto done;
+ }
+
+ spin_unlock_irqrestore(&ehci->lock, flags);
+
+ /* Handle the hub control events here */
+ return ehci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
+done:
+ spin_unlock_irqrestore(&ehci->lock, flags);
+ return retval;
+}
+
static void disable_put_regulator(
struct ehci_hcd_omap_platform_data *pdata)
{
}
}
+ /* Hold PHYs in reset while initializing EHCI controller */
if (pdata->phy_reset) {
if (gpio_is_valid(pdata->reset_gpio_port[0]))
- gpio_request_one(pdata->reset_gpio_port[0],
- GPIOF_OUT_INIT_LOW, "USB1 PHY reset");
+ gpio_set_value_cansleep(pdata->reset_gpio_port[0], 0);
if (gpio_is_valid(pdata->reset_gpio_port[1]))
- gpio_request_one(pdata->reset_gpio_port[1],
- GPIOF_OUT_INIT_LOW, "USB2 PHY reset");
+ gpio_set_value_cansleep(pdata->reset_gpio_port[1], 0);
/* Hold the PHY in RESET for enough time till DIR is high */
udelay(10);
omap_ehci->hcs_params = readl(&omap_ehci->caps->hcs_params);
ehci_reset(omap_ehci);
+ ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
+ if (ret) {
+ dev_err(dev, "failed to add hcd with err %d\n", ret);
+ goto err_add_hcd;
+ }
if (pdata->phy_reset) {
/* Hold the PHY in RESET for enough time till
gpio_set_value_cansleep(pdata->reset_gpio_port[1], 1);
}
- ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
- if (ret) {
- dev_err(dev, "failed to add hcd with err %d\n", ret);
+ /* root ports should always stay powered */
+ ehci_port_power(omap_ehci, 1);
+
+ /* get clocks */
+ utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk");
+ if (IS_ERR(utmi_p1_fck)) {
+ ret = PTR_ERR(utmi_p1_fck);
+ dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret);
goto err_add_hcd;
}
- /* root ports should always stay powered */
- ehci_port_power(omap_ehci, 1);
+ xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck");
+ if (IS_ERR(xclk60mhsp1_ck)) {
+ ret = PTR_ERR(xclk60mhsp1_ck);
+ dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret);
+ goto err_utmi_p1_fck;
+ }
+
+ utmi_p2_fck = clk_get(dev, "utmi_p2_gfclk");
+ if (IS_ERR(utmi_p2_fck)) {
+ ret = PTR_ERR(utmi_p2_fck);
+ dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret);
+ goto err_xclk60mhsp1_ck;
+ }
+
+ xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck");
+ if (IS_ERR(xclk60mhsp2_ck)) {
+ ret = PTR_ERR(xclk60mhsp2_ck);
+ dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret);
+ goto err_utmi_p2_fck;
+ }
+
+ usbhost_p1_fck = clk_get(dev, "usb_host_hs_utmi_p1_clk");
+ if (IS_ERR(usbhost_p1_fck)) {
+ ret = PTR_ERR(usbhost_p1_fck);
+ dev_err(dev, "usbhost_p1_fck failed error:%d\n", ret);
+ goto err_xclk60mhsp2_ck;
+ }
+
+ usbhost_p2_fck = clk_get(dev, "usb_host_hs_utmi_p2_clk");
+ if (IS_ERR(usbhost_p2_fck)) {
+ ret = PTR_ERR(usbhost_p2_fck);
+ dev_err(dev, "usbhost_p2_fck failed error:%d\n", ret);
+ goto err_usbhost_p1_fck;
+ }
+
+ init_60m_fclk = clk_get(dev, "init_60m_fclk");
+ if (IS_ERR(init_60m_fclk)) {
+ ret = PTR_ERR(init_60m_fclk);
+ dev_err(dev, "init_60m_fclk failed error:%d\n", ret);
+ goto err_usbhost_p2_fck;
+ }
return 0;
+err_usbhost_p2_fck:
+ clk_put(usbhost_p2_fck);
+
+err_usbhost_p1_fck:
+ clk_put(usbhost_p1_fck);
+
+err_xclk60mhsp2_ck:
+ clk_put(xclk60mhsp2_ck);
+
+err_utmi_p2_fck:
+ clk_put(utmi_p2_fck);
+
+err_xclk60mhsp1_ck:
+ clk_put(xclk60mhsp1_ck);
+
+err_utmi_p1_fck:
+ clk_put(utmi_p1_fck);
+
err_add_hcd:
disable_put_regulator(pdata);
pm_runtime_put_sync(dev);
disable_put_regulator(dev->platform_data);
iounmap(hcd->regs);
usb_put_hcd(hcd);
+
+ clk_put(utmi_p1_fck);
+ clk_put(utmi_p2_fck);
+ clk_put(xclk60mhsp1_ck);
+ clk_put(xclk60mhsp2_ck);
+ clk_put(usbhost_p1_fck);
+ clk_put(usbhost_p2_fck);
+ clk_put(init_60m_fclk);
+
pm_runtime_put_sync(dev);
pm_runtime_disable(dev);
* root hub support
*/
.hub_status_data = ehci_hub_status_data,
- .hub_control = ehci_hub_control,
+ .hub_control = omap_ehci_hub_control,
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
hcd->has_tt = 1;
tdi_reset(ehci);
}
- if (pdev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK) {
- /* EHCI #1 or #2 on 6 Series/C200 Series chipset */
- if (pdev->device == 0x1c26 || pdev->device == 0x1c2d) {
- ehci_info(ehci, "broken D3 during system sleep on ASUS\n");
- hcd->broken_pci_sleep = 1;
- device_set_wakeup_capable(&pdev->dev, false);
- }
- }
break;
case PCI_VENDOR_ID_TDI:
if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
goto fail_create_hcd;
}
- if (pdev->dev.platform_data != NULL)
- pdata = pdev->dev.platform_data;
+ pdata = pdev->dev.platform_data;
/* initialize hcd */
hcd = usb_create_hcd(&ehci_sh_hc_driver, &pdev->dev,
*
* Properly shutdown the hcd, call driver's shutdown routine.
*/
-static int ehci_hcd_xilinx_of_shutdown(struct platform_device *op)
+static void ehci_hcd_xilinx_of_shutdown(struct platform_device *op)
{
struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
if (hcd->driver->shutdown)
hcd->driver->shutdown(hcd);
-
- return 0;
}
}
/* Carry out the final steps of resuming the controller device */
-static void ohci_finish_controller_resume(struct usb_hcd *hcd)
+static void __maybe_unused ohci_finish_controller_resume(struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
int port;
}
}
+/* Updates Link Status for super Speed port */
+static void xhci_hub_report_link_state(u32 *status, u32 status_reg)
+{
+ u32 pls = status_reg & PORT_PLS_MASK;
+
+ /* resume state is a xHCI internal state.
+ * Do not report it to usb core.
+ */
+ if (pls == XDEV_RESUME)
+ return;
+
+ /* When the CAS bit is set then warm reset
+ * should be performed on port
+ */
+ if (status_reg & PORT_CAS) {
+ /* The CAS bit can be set while the port is
+ * in any link state.
+ * Only roothubs have CAS bit, so we
+ * pretend to be in compliance mode
+ * unless we're already in compliance
+ * or the inactive state.
+ */
+ if (pls != USB_SS_PORT_LS_COMP_MOD &&
+ pls != USB_SS_PORT_LS_SS_INACTIVE) {
+ pls = USB_SS_PORT_LS_COMP_MOD;
+ }
+ /* Return also connection bit -
+ * hub state machine resets port
+ * when this bit is set.
+ */
+ pls |= USB_PORT_STAT_CONNECTION;
+ }
+ /* update status field */
+ *status |= pls;
+}
+
int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
u16 wIndex, char *buf, u16 wLength)
{
else
status |= USB_PORT_STAT_POWER;
}
- /* Port Link State */
+ /* Update Port Link State for super speed ports*/
if (hcd->speed == HCD_USB3) {
- /* resume state is a xHCI internal state.
- * Do not report it to usb core.
- */
- if ((temp & PORT_PLS_MASK) != XDEV_RESUME)
- status |= (temp & PORT_PLS_MASK);
+ xhci_hub_report_link_state(&status, temp);
}
if (bus_state->port_c_suspend & (1 << wIndex))
status |= 1 << USB_PORT_FEAT_C_SUSPEND;
struct xhci_virt_device *virt_dev,
int slot_id)
{
- struct list_head *tt;
struct list_head *tt_list_head;
- struct list_head *tt_next;
- struct xhci_tt_bw_info *tt_info;
+ struct xhci_tt_bw_info *tt_info, *next;
+ bool slot_found = false;
/* If the device never made it past the Set Address stage,
* it may not have the real_port set correctly.
}
tt_list_head = &(xhci->rh_bw[virt_dev->real_port - 1].tts);
- if (list_empty(tt_list_head))
- return;
-
- list_for_each(tt, tt_list_head) {
- tt_info = list_entry(tt, struct xhci_tt_bw_info, tt_list);
- if (tt_info->slot_id == slot_id)
+ list_for_each_entry_safe(tt_info, next, tt_list_head, tt_list) {
+ /* Multi-TT hubs will have more than one entry */
+ if (tt_info->slot_id == slot_id) {
+ slot_found = true;
+ list_del(&tt_info->tt_list);
+ kfree(tt_info);
+ } else if (slot_found) {
break;
+ }
}
- /* Cautionary measure in case the hub was disconnected before we
- * stored the TT information.
- */
- if (tt_info->slot_id != slot_id)
- return;
-
- tt_next = tt->next;
- tt_info = list_entry(tt, struct xhci_tt_bw_info,
- tt_list);
- /* Multi-TT hubs will have more than one entry */
- do {
- list_del(tt);
- kfree(tt_info);
- tt = tt_next;
- if (list_empty(tt_list_head))
- break;
- tt_next = tt->next;
- tt_info = list_entry(tt, struct xhci_tt_bw_info,
- tt_list);
- } while (tt_info->slot_id == slot_id);
}
int xhci_alloc_tt_info(struct xhci_hcd *xhci,
{
struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
struct dev_info *dev_info, *next;
- struct list_head *tt_list_head;
- struct list_head *tt;
- struct list_head *endpoints;
- struct list_head *ep, *q;
- struct xhci_tt_bw_info *tt_info;
- struct xhci_interval_bw_table *bwt;
- struct xhci_virt_ep *virt_ep;
-
unsigned long flags;
int size;
- int i;
+ int i, j, num_ports;
/* Free the Event Ring Segment Table and the actual Event Ring */
size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
}
spin_unlock_irqrestore(&xhci->lock, flags);
- bwt = &xhci->rh_bw->bw_table;
- for (i = 0; i < XHCI_MAX_INTERVAL; i++) {
- endpoints = &bwt->interval_bw[i].endpoints;
- list_for_each_safe(ep, q, endpoints) {
- virt_ep = list_entry(ep, struct xhci_virt_ep, bw_endpoint_list);
- list_del(&virt_ep->bw_endpoint_list);
- kfree(virt_ep);
+ num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
+ for (i = 0; i < num_ports; i++) {
+ struct xhci_interval_bw_table *bwt = &xhci->rh_bw[i].bw_table;
+ for (j = 0; j < XHCI_MAX_INTERVAL; j++) {
+ struct list_head *ep = &bwt->interval_bw[j].endpoints;
+ while (!list_empty(ep))
+ list_del_init(ep->next);
}
}
- tt_list_head = &xhci->rh_bw->tts;
- list_for_each_safe(tt, q, tt_list_head) {
- tt_info = list_entry(tt, struct xhci_tt_bw_info, tt_list);
- list_del(tt);
- kfree(tt_info);
+ for (i = 0; i < num_ports; i++) {
+ struct xhci_tt_bw_info *tt, *n;
+ list_for_each_entry_safe(tt, n, &xhci->rh_bw[i].tts, tt_list) {
+ list_del(&tt->tt_list);
+ kfree(tt);
+ }
}
xhci->num_usb2_ports = 0;
num_trbs_free_temp = ep_ring->num_trbs_free;
dequeue_temp = ep_ring->dequeue;
+ /* If we get two back-to-back stalls, and the first stalled transfer
+ * ends just before a link TRB, the dequeue pointer will be left on
+ * the link TRB by the code in the while loop. So we have to update
+ * the dequeue pointer one segment further, or we'll jump off
+ * the segment into la-la-land.
+ */
+ if (last_trb(xhci, ep_ring, ep_ring->deq_seg, ep_ring->dequeue)) {
+ ep_ring->deq_seg = ep_ring->deq_seg->next;
+ ep_ring->dequeue = ep_ring->deq_seg->trbs;
+ }
+
while (ep_ring->dequeue != dev->eps[ep_index].queued_deq_ptr) {
/* We have more usable TRBs */
ep_ring->num_trbs_free++;
command = xhci_readl(xhci, &xhci->op_regs->command);
command |= CMD_CSS;
xhci_writel(xhci, command, &xhci->op_regs->command);
- if (handshake(xhci, &xhci->op_regs->status, STS_SAVE, 0, 10*100)) {
- xhci_warn(xhci, "WARN: xHC CMD_CSS timeout\n");
+ if (handshake(xhci, &xhci->op_regs->status, STS_SAVE, 0, 10 * 1000)) {
+ xhci_warn(xhci, "WARN: xHC save state timeout\n");
spin_unlock_irq(&xhci->lock);
return -ETIMEDOUT;
}
command |= CMD_CRS;
xhci_writel(xhci, command, &xhci->op_regs->command);
if (handshake(xhci, &xhci->op_regs->status,
- STS_RESTORE, 0, 10*100)) {
- xhci_dbg(xhci, "WARN: xHC CMD_CSS timeout\n");
+ STS_RESTORE, 0, 10 * 1000)) {
+ xhci_warn(xhci, "WARN: xHC restore state timeout\n");
spin_unlock_irq(&xhci->lock);
return -ETIMEDOUT;
}
default:
dev_warn(&udev->dev, "%s: Can't get timeout for non-U1 or U2 state.\n",
__func__);
- return -EINVAL;
+ return USB3_LPM_DISABLED;
}
if (sel <= max_sel_pel && pel <= max_sel_pel)
#define PORT_PLC (1 << 22)
/* port configure error change - port failed to configure its link partner */
#define PORT_CEC (1 << 23)
-/* bit 24 reserved */
+/* Cold Attach Status - xHC can set this bit to report device attached during
+ * Sx state. Warm port reset should be perfomed to clear this bit and move port
+ * to connected state.
+ */
+#define PORT_CAS (1 << 24)
/* wake on connect (enable) */
#define PORT_WKCONN_E (1 << 25)
/* wake on disconnect (enable) */
#include <linux/dma-mapping.h>
#include <mach/cputype.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
*/
/* Integrated highspeed/otg PHY */
-#define USBPHY_CTL_PADDR (DAVINCI_SYSTEM_MODULE_BASE + 0x34)
+#define USBPHY_CTL_PADDR 0x01c40034
#define USBPHY_DATAPOL BIT(11) /* (dm355) switch D+/D- */
#define USBPHY_PHYCLKGD BIT(8)
#define USBPHY_SESNDEN BIT(7) /* v(sess_end) comparator */
#define USBPHY_OTGPDWN BIT(1)
#define USBPHY_PHYPDWN BIT(0)
-#define DM355_DEEPSLEEP_PADDR (DAVINCI_SYSTEM_MODULE_BASE + 0x48)
+#define DM355_DEEPSLEEP_PADDR 0x01c40048
#define DRVVBUS_FORCE BIT(2)
#define DRVVBUS_OVERRIDE BIT(1)
}
musb_ep->desc = NULL;
+ musb_ep->end_point.desc = NULL;
/* abort all pending DMA and requests */
nuke(musb_ep, -ESHUTDOWN);
*/
if (list_empty(&qh->hep->urb_list)) {
struct list_head *head;
+ struct dma_controller *dma = musb->dma_controller;
- if (is_in)
+ if (is_in) {
ep->rx_reinit = 1;
- else
+ if (ep->rx_channel) {
+ dma->channel_release(ep->rx_channel);
+ ep->rx_channel = NULL;
+ }
+ } else {
ep->tx_reinit = 1;
+ if (ep->tx_channel) {
+ dma->channel_release(ep->tx_channel);
+ ep->tx_channel = NULL;
+ }
+ }
/* Clobber old pointers to this qh */
musb_ep_set_qh(ep, is_in, NULL);
regulator_enable(twl->usb3v3);
twl->asleep = 1;
- twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR, 0x1);
- twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET,
- 0x10);
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_CLR);
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_SET);
status = USB_EVENT_ID;
otg->default_a = true;
twl->phy.state = OTG_STATE_A_IDLE;
atomic_notifier_call_chain(&twl->phy.notifier, status,
otg->gadget);
} else {
- twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR,
- 0x10);
- twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET,
- 0x1);
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_CLR);
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
}
- twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_LATCH_CLR, status);
+ twl6030_writeb(twl, TWL_MODULE_USB, status, USB_ID_INT_LATCH_CLR);
return IRQ_HANDLED;
}
{
struct twl6030_usb *twl = phy_to_twl(x);
- twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET, 0x1);
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
twl6030_interrupt_unmask(0x05, REG_INT_MSK_LINE_C);
twl6030_interrupt_unmask(0x05, REG_INT_MSK_STS_C);
# Physical Layer USB driver configuration
#
comment "USB Physical Layer drivers"
- depends on USB
+ depends on USB || USB_GADGET
config USB_ISP1301
tristate "NXP ISP1301 USB transceiver support"
- depends on USB
+ depends on USB || USB_GADGET
depends on I2C
help
Say Y here to add support for the NXP ISP1301 USB transceiver driver.
{ USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */
{ USB_DEVICE(0x10C4, 0x806F) }, /* IMS USB to RS422 Converter Cable */
{ USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */
+ { USB_DEVICE(0x10C4, 0x80C4) }, /* Cygnal Integrated Products, Inc., Optris infrared thermometer */
{ USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
{ USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */
{ USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
{ USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */
{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
+ { USB_DEVICE(0x10C4, 0x815F) }, /* Timewave HamLinkUSB */
{ USB_DEVICE(0x10C4, 0x818B) }, /* AVIT Research USB to TTL */
{ USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */
{ USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */
{ USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */
{ USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
{ USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */
+ { USB_DEVICE(0x166A, 0x0201) }, /* Clipsal 5500PACA C-Bus Pascal Automation Controller */
+ { USB_DEVICE(0x166A, 0x0301) }, /* Clipsal 5800PC C-Bus Wireless PC Interface */
{ USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
+ { USB_DEVICE(0x166A, 0x0304) }, /* Clipsal 5000CT2 C-Bus Black and White Touchscreen */
+ { USB_DEVICE(0x166A, 0x0305) }, /* Clipsal C-5000CT2 C-Bus Spectrum Colour Touchscreen */
+ { USB_DEVICE(0x166A, 0x0401) }, /* Clipsal L51xx C-Bus Architectural Dimmer */
+ { USB_DEVICE(0x166A, 0x0101) }, /* Clipsal 5560884 C-Bus Multi-room Audio Matrix Switcher */
{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
{ USB_DEVICE(0x16DC, 0x0010) }, /* W-IE-NE-R Plein & Baus GmbH PL512 Power Supply */
{ USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */
{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
+ { USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
+ { USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */
{ USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
+ { USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */
+ { USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */
{ USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
{ } /* Terminating Entry */
};
{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_CT29B_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_RTS01_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
{ USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
#define RTSYSTEMS_VID 0x2100 /* Vendor ID */
#define RTSYSTEMS_SERIAL_VX7_PID 0x9e52 /* Serial converter for VX-7 Radios using FT232RL */
#define RTSYSTEMS_CT29B_PID 0x9e54 /* CT29B Radio Cable */
+#define RTSYSTEMS_RTS01_PID 0x9e57 /* USB-RTS01 Radio Cable */
/*
static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */
-/* we want to look at all devices, as the vendor/product id can change
- * depending on the command line argument */
-static const struct usb_device_id generic_serial_ids[] = {
- {.driver_info = 42},
- {}
-};
-
/* All of the device info needed for the Generic Serial Converter */
struct usb_serial_driver usb_serial_generic_device = {
.driver = {
USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT;
/* register our generic driver with ourselves */
- retval = usb_serial_register_drivers(serial_drivers, "usbserial_generic", generic_serial_ids);
+ retval = usb_serial_register_drivers(serial_drivers,
+ "usbserial_generic", generic_device_ids);
#endif
return retval;
}
MCT_U232_SET_REQUEST_TYPE,
0, 0, buf, MCT_U232_SET_MODEM_CTRL_SIZE,
WDR_TIMEOUT);
- if (rc < 0)
- dev_err(&serial->dev->dev,
- "Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc);
+ kfree(buf);
+
dbg("set_modem_ctrl: state=0x%x ==> mcr=0x%x", control_state, mcr);
- kfree(buf);
- return rc;
+ if (rc < 0) {
+ dev_err(&serial->dev->dev,
+ "Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc);
+ return rc;
+ }
+ return 0;
} /* mct_u232_set_modem_ctrl */
static int mct_u232_get_modem_stat(struct usb_serial *serial,
metro_priv->throttled = 0;
spin_unlock_irqrestore(&metro_priv->lock, flags);
- /*
- * Force low_latency on so that our tty_push actually forces the data
- * through, otherwise it is scheduled, and with high data rates (like
- * with OHCI) data can get lost.
- */
- if (tty)
- tty->low_latency = 1;
-
/* Clear the urb pipe. */
usb_clear_halt(serial->dev, port->interrupt_in_urb->pipe);
static int device_type;
-static const struct usb_device_id id_table[] __devinitconst = {
+static const struct usb_device_id id_table[] = {
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)},
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7810)},
/* Function prototypes */
static int option_probe(struct usb_serial *serial,
const struct usb_device_id *id);
+static void option_release(struct usb_serial *serial);
static int option_send_setup(struct usb_serial_port *port);
static void option_instat_callback(struct urb *urb);
#define HUAWEI_PRODUCT_E14AC 0x14AC
#define HUAWEI_PRODUCT_K3806 0x14AE
#define HUAWEI_PRODUCT_K4605 0x14C6
+#define HUAWEI_PRODUCT_K5005 0x14C8
#define HUAWEI_PRODUCT_K3770 0x14C9
#define HUAWEI_PRODUCT_K3771 0x14CA
#define HUAWEI_PRODUCT_K4510 0x14CB
#define NOVATELWIRELESS_PRODUCT_G1 0xA001
#define NOVATELWIRELESS_PRODUCT_G1_M 0xA002
#define NOVATELWIRELESS_PRODUCT_G2 0xA010
+#define NOVATELWIRELESS_PRODUCT_MC551 0xB001
/* AMOI PRODUCTS */
#define AMOI_VENDOR_ID 0x1614
#define SAMSUNG_VENDOR_ID 0x04e8
#define SAMSUNG_PRODUCT_GT_B3730 0x6889
-/* YUGA products www.yuga-info.com*/
+/* YUGA products www.yuga-info.com gavin.kx@qq.com */
#define YUGA_VENDOR_ID 0x257A
#define YUGA_PRODUCT_CEM600 0x1601
#define YUGA_PRODUCT_CEM610 0x1602
#define YUGA_PRODUCT_CEU516 0x160C
#define YUGA_PRODUCT_CEU528 0x160D
#define YUGA_PRODUCT_CEU526 0x160F
+#define YUGA_PRODUCT_CEU881 0x161F
+#define YUGA_PRODUCT_CEU882 0x162F
#define YUGA_PRODUCT_CWM600 0x2601
#define YUGA_PRODUCT_CWM610 0x2602
#define YUGA_PRODUCT_CWU518 0x260B
#define YUGA_PRODUCT_CWU516 0x260C
#define YUGA_PRODUCT_CWU528 0x260D
+#define YUGA_PRODUCT_CWU581 0x260E
#define YUGA_PRODUCT_CWU526 0x260F
-
-#define YUGA_PRODUCT_CLM600 0x2601
-#define YUGA_PRODUCT_CLM610 0x2602
-#define YUGA_PRODUCT_CLM500 0x2603
-#define YUGA_PRODUCT_CLM510 0x2604
-#define YUGA_PRODUCT_CLM800 0x2605
-#define YUGA_PRODUCT_CLM900 0x2606
-
-#define YUGA_PRODUCT_CLU718 0x2607
-#define YUGA_PRODUCT_CLU716 0x2608
-#define YUGA_PRODUCT_CLU728 0x2609
-#define YUGA_PRODUCT_CLU726 0x260A
-#define YUGA_PRODUCT_CLU518 0x260B
-#define YUGA_PRODUCT_CLU516 0x260C
-#define YUGA_PRODUCT_CLU528 0x260D
-#define YUGA_PRODUCT_CLU526 0x260F
+#define YUGA_PRODUCT_CWU582 0x261F
+#define YUGA_PRODUCT_CWU583 0x262F
+
+#define YUGA_PRODUCT_CLM600 0x3601
+#define YUGA_PRODUCT_CLM610 0x3602
+#define YUGA_PRODUCT_CLM500 0x3603
+#define YUGA_PRODUCT_CLM510 0x3604
+#define YUGA_PRODUCT_CLM800 0x3605
+#define YUGA_PRODUCT_CLM900 0x3606
+
+#define YUGA_PRODUCT_CLU718 0x3607
+#define YUGA_PRODUCT_CLU716 0x3608
+#define YUGA_PRODUCT_CLU728 0x3609
+#define YUGA_PRODUCT_CLU726 0x360A
+#define YUGA_PRODUCT_CLU518 0x360B
+#define YUGA_PRODUCT_CLU516 0x360C
+#define YUGA_PRODUCT_CLU528 0x360D
+#define YUGA_PRODUCT_CLU526 0x360F
/* Viettel products */
#define VIETTEL_VENDOR_ID 0x2262
/* MediaTek products */
#define MEDIATEK_VENDOR_ID 0x0e8d
+#define MEDIATEK_PRODUCT_DC_1COM 0x00a0
+#define MEDIATEK_PRODUCT_DC_4COM 0x00a5
+#define MEDIATEK_PRODUCT_DC_5COM 0x00a4
+#define MEDIATEK_PRODUCT_7208_1COM 0x7101
+#define MEDIATEK_PRODUCT_7208_2COM 0x7102
+#define MEDIATEK_PRODUCT_FP_1COM 0x0003
+#define MEDIATEK_PRODUCT_FP_2COM 0x0023
+#define MEDIATEK_PRODUCT_FPDC_1COM 0x0043
+#define MEDIATEK_PRODUCT_FPDC_2COM 0x0033
+
+/* Cellient products */
+#define CELLIENT_VENDOR_ID 0x2692
+#define CELLIENT_PRODUCT_MEN200 0x9005
/* some devices interfaces need special handling due to a number of reasons */
enum option_blacklist_reason {
.reserved = BIT(1),
};
+static const struct option_blacklist_info net_intf2_blacklist = {
+ .reserved = BIT(2),
+};
+
static const struct option_blacklist_info net_intf3_blacklist = {
.reserved = BIT(3),
};
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3806, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0x01, 0x31) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0x01, 0x32) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x31) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x32) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x33) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x31) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x32) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3771, 0xff, 0x02, 0x31) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G1) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G1_M) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G2) },
+ /* Novatel Ovation MC551 a.k.a. Verizon USB551L */
+ { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC551, 0xff, 0xff, 0xff) },
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) },
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1298, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1299, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1300, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1402, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&net_intf2_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff,
0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU516) },
{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU528) },
{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU526) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU881) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU882) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU581) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU582) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU583) },
{ USB_DEVICE_AND_INTERFACE_INFO(VIETTEL_VENDOR_ID, VIETTEL_PRODUCT_VT1000, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZD_VENDOR_ID, ZD_PRODUCT_7000, 0xff, 0xff, 0xff) },
{ USB_DEVICE(LG_VENDOR_ID, LG_PRODUCT_L02C) }, /* docomo L-02C modem */
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a1, 0xff, 0x02, 0x01) },
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x00, 0x00) },
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x02, 0x01) }, /* MediaTek MT6276M modem & app port */
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_1COM, 0x0a, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_5COM, 0xff, 0x02, 0x01) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_5COM, 0xff, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM, 0xff, 0x02, 0x01) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM, 0xff, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7208_1COM, 0x02, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7208_2COM, 0x02, 0x02, 0x01) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FP_1COM, 0x0a, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FP_2COM, 0x0a, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FPDC_1COM, 0x0a, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FPDC_2COM, 0x0a, 0x00, 0x00) },
+ { USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
.ioctl = usb_wwan_ioctl,
.attach = usb_wwan_startup,
.disconnect = usb_wwan_disconnect,
- .release = usb_wwan_release,
+ .release = option_release,
.read_int_callback = option_instat_callback,
#ifdef CONFIG_PM
.suspend = usb_wwan_suspend,
static bool debug;
-/* per port private data */
-
-#define N_IN_URB 4
-#define N_OUT_URB 4
-#define IN_BUFLEN 4096
-#define OUT_BUFLEN 4096
-
-struct option_port_private {
- /* Input endpoints and buffer for this port */
- struct urb *in_urbs[N_IN_URB];
- u8 *in_buffer[N_IN_URB];
- /* Output endpoints and buffer for this port */
- struct urb *out_urbs[N_OUT_URB];
- u8 *out_buffer[N_OUT_URB];
- unsigned long out_busy; /* Bit vector of URBs in use */
- int opened;
- struct usb_anchor delayed;
-
- /* Settings for the port */
- int rts_state; /* Handshaking pins (outputs) */
- int dtr_state;
- int cts_state; /* Handshaking pins (inputs) */
- int dsr_state;
- int dcd_state;
- int ri_state;
-
- unsigned long tx_start_time[N_OUT_URB];
-};
-
module_usb_serial_driver(serial_drivers, option_ids);
static bool is_blacklisted(const u8 ifnum, enum option_blacklist_reason reason,
return 0;
}
+static void option_release(struct usb_serial *serial)
+{
+ struct usb_wwan_intf_private *priv = usb_get_serial_data(serial);
+
+ usb_wwan_release(serial);
+
+ kfree(priv);
+}
+
static void option_instat_callback(struct urb *urb)
{
int err;
int status = urb->status;
struct usb_serial_port *port = urb->context;
- struct option_port_private *portdata = usb_get_serial_port_data(port);
+ struct usb_wwan_port_private *portdata =
+ usb_get_serial_port_data(port);
dbg("%s: urb %p port %p has data %p", __func__, urb, port, portdata);
struct usb_serial *serial = port->serial;
struct usb_wwan_intf_private *intfdata =
(struct usb_wwan_intf_private *) serial->private;
- struct option_port_private *portdata;
+ struct usb_wwan_port_private *portdata;
int ifNum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
int val = 0;
{USB_DEVICE(0x1410, 0xa021)}, /* Novatel Gobi 3000 Composite */
{USB_DEVICE(0x413c, 0x8193)}, /* Dell Gobi 3000 QDL */
{USB_DEVICE(0x413c, 0x8194)}, /* Dell Gobi 3000 Composite */
+ {USB_DEVICE(0x1199, 0x9010)}, /* Sierra Wireless Gobi 3000 QDL */
+ {USB_DEVICE(0x1199, 0x9012)}, /* Sierra Wireless Gobi 3000 QDL */
{USB_DEVICE(0x1199, 0x9013)}, /* Sierra Wireless Gobi 3000 Modem device (MC8355) */
+ {USB_DEVICE(0x1199, 0x9014)}, /* Sierra Wireless Gobi 3000 QDL */
+ {USB_DEVICE(0x1199, 0x9015)}, /* Sierra Wireless Gobi 3000 Modem device */
+ {USB_DEVICE(0x1199, 0x9018)}, /* Sierra Wireless Gobi 3000 QDL */
+ {USB_DEVICE(0x1199, 0x9019)}, /* Sierra Wireless Gobi 3000 Modem device */
{USB_DEVICE(0x12D1, 0x14F0)}, /* Sony Gobi 3000 QDL */
{USB_DEVICE(0x12D1, 0x14F1)}, /* Sony Gobi 3000 Composite */
{ } /* Terminating entry */
{ USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},
+ /* AT&T Direct IP LTE modems */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x0F3D, 0x68AA, 0xFF, 0xFF, 0xFF),
+ .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
+ },
{ USB_DEVICE(0x0f3d, 0x68A3), /* Airprime/Sierra Wireless Direct IP modems */
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},
static struct usb_serial_driver *search_serial_device(
struct usb_interface *iface)
{
- const struct usb_device_id *id;
+ const struct usb_device_id *id = NULL;
struct usb_serial_driver *drv;
+ struct usb_driver *driver = to_usb_driver(iface->dev.driver);
/* Check if the usb id matches a known device */
list_for_each_entry(drv, &usb_serial_driver_list, driver_list) {
- id = get_iface_id(drv, iface);
+ if (drv->usb_driver == driver)
+ id = get_iface_id(drv, iface);
if (id)
return drv;
}
if (retval) {
dbg("sub driver rejected device");
- kfree(serial);
+ usb_serial_put(serial);
module_put(type->driver.owner);
return retval;
}
*/
if (num_bulk_in == 0 || num_bulk_out == 0) {
dev_info(&interface->dev, "PL-2303 hack: descriptors matched but endpoints did not\n");
- kfree(serial);
+ usb_serial_put(serial);
module_put(type->driver.owner);
return -ENODEV;
}
if (num_ports == 0) {
dev_err(&interface->dev,
"Generic device with no bulk out, not allowed.\n");
- kfree(serial);
+ usb_serial_put(serial);
module_put(type->driver.owner);
return -EIO;
}
if (us->fflags & US_FL_NO_READ_CAPACITY_16)
sdev->no_read_capacity_16 = 1;
+ /*
+ * Many devices do not respond properly to READ_CAPACITY_16.
+ * Tell the SCSI layer to try READ_CAPACITY_10 first.
+ */
+ sdev->try_rc_10_first = 1;
+
/* assume SPC3 or latter devices support sense size > 18 */
if (sdev->scsi_level > SCSI_SPC_2)
us->fflags |= US_FL_SANE_SENSE;
struct vhost_dev *dev = data;
struct vhost_work *work = NULL;
unsigned uninitialized_var(seq);
+ mm_segment_t oldfs = get_fs();
+ set_fs(USER_DS);
use_mm(dev->mm);
for (;;) {
}
unuse_mm(dev->mm);
+ set_fs(oldfs);
return 0;
}
config LCD_TOSA
tristate "Sharp SL-6000 LCD Driver"
- depends on SPI && MACH_TOSA
+ depends on I2C && SPI && MACH_TOSA
help
If you have an Sharp SL-6000 Zaurus say Y to enable a driver
for its LCD.
EXPORT_SYMBOL_GPL(ili9320_probe_spi);
-int __devexit ili9320_remove(struct ili9320 *ili)
+int ili9320_remove(struct ili9320 *ili)
{
ili9320_power(ili, FB_BLANK_POWERDOWN);
static int
adv7393_write_proc(struct file *file, const char __user * buffer,
- unsigned long count, void *data)
+ size_t count, void *data)
{
struct adv7393fb_device *fbdev = data;
- char line[8];
unsigned int val;
int ret;
- ret = copy_from_user(line, buffer, count);
+ ret = kstrtouint_from_user(buffer, count, 0, &val);
if (ret)
return -EFAULT;
- val = simple_strtoul(line, NULL, 0);
adv7393_write(fbdev->client, val >> 8, val & 0xff);
return count;
static struct platform_driver broadsheetfb_driver = {
.probe = broadsheetfb_probe,
- .remove = broadsheetfb_remove,
+ .remove = __devexit_p(broadsheetfb_remove),
.driver = {
.owner = THIS_MODULE,
.name = "broadsheetfb",
big letters. It fits between the sun 12x22 and the normal 8x16 font.
If other fonts are too big or too small for you, say Y, otherwise say N.
+config FONT_AUTOSELECT
+ def_bool y
+ depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE || STI_CONSOLE || USB_SISUSBVGA_CON
+ depends on !FONT_8x8
+ depends on !FONT_6x11
+ depends on !FONT_7x14
+ depends on !FONT_PEARL_8x8
+ depends on !FONT_ACORN_8x8
+ depends on !FONT_MINI_4x6
+ depends on !FONT_SUN8x16
+ depends on !FONT_SUN12x22
+ depends on !FONT_10x18
+ select FONT_8x16
+
endmenu
static struct platform_driver mbxfb_driver = {
.probe = mbxfb_probe,
- .remove = mbxfb_remove,
+ .remove = __devexit_p(mbxfb_remove),
.suspend = mbxfb_suspend,
.resume = mbxfb_resume,
.driver = {
{
struct omap_dss_device *dssdev = to_dss_device(dev);
struct taal_data *td = dev_get_drvdata(&dssdev->dev);
- u8 errors;
+ u8 errors = 0;
int r;
mutex_lock(&td->lock);
#include <linux/io.h>
#include <linux/device.h>
#include <linux/regulator/consumer.h>
+#include <linux/suspend.h>
#include <video/omapdss.h>
static inline void dss_uninitialize_debugfs(void)
{
}
-static inline int dss_debugfs_create_file(const char *name,
- void (*write)(struct seq_file *))
+int dss_debugfs_create_file(const char *name, void (*write)(struct seq_file *))
{
return 0;
}
#endif /* CONFIG_DEBUG_FS && CONFIG_OMAP2_DSS_DEBUG_SUPPORT */
/* PLATFORM DEVICE */
+static int omap_dss_pm_notif(struct notifier_block *b, unsigned long v, void *d)
+{
+ DSSDBG("pm notif %lu\n", v);
+
+ switch (v) {
+ case PM_SUSPEND_PREPARE:
+ DSSDBG("suspending displays\n");
+ return dss_suspend_all_devices();
+
+ case PM_POST_SUSPEND:
+ DSSDBG("resuming displays\n");
+ return dss_resume_all_devices();
+
+ default:
+ return 0;
+ }
+}
+
+static struct notifier_block omap_dss_pm_notif_block = {
+ .notifier_call = omap_dss_pm_notif,
+};
+
static int __init omap_dss_probe(struct platform_device *pdev)
{
struct omap_dss_board_info *pdata = pdev->dev.platform_data;
else if (pdata->default_device)
core.default_display_name = pdata->default_device->name;
+ register_pm_notifier(&omap_dss_pm_notif_block);
+
return 0;
err_debugfs:
static int omap_dss_remove(struct platform_device *pdev)
{
+ unregister_pm_notifier(&omap_dss_pm_notif_block);
+
dss_uninitialize_debugfs();
dss_uninit_overlays(pdev);
dss_disable_all_devices();
}
-static int omap_dss_suspend(struct platform_device *pdev, pm_message_t state)
-{
- DSSDBG("suspend %d\n", state.event);
-
- return dss_suspend_all_devices();
-}
-
-static int omap_dss_resume(struct platform_device *pdev)
-{
- DSSDBG("resume\n");
-
- return dss_resume_all_devices();
-}
-
static struct platform_driver omap_dss_driver = {
.remove = omap_dss_remove,
.shutdown = omap_dss_shutdown,
- .suspend = omap_dss_suspend,
- .resume = omap_dss_resume,
.driver = {
.name = "omapdss",
.owner = THIS_MODULE,
DSSDBG("dispc_runtime_put\n");
r = pm_runtime_put_sync(&dispc.pdev->dev);
- WARN_ON(r < 0);
+ WARN_ON(r < 0 && r != -ENOSYS);
}
static inline bool dispc_mgr_is_lcd(enum omap_channel channel)
DSSDBG("dsi_runtime_put\n");
r = pm_runtime_put_sync(&dsi->pdev->dev);
- WARN_ON(r < 0);
+ WARN_ON(r < 0 && r != -ENOSYS);
}
/* source clock for DSI PLL. this could also be PCLKFREE */
/* CLKIN4DDR = 16 * TXBYTECLKHS */
tlp_avail = thsbyte_clk * (blank - trans_lp);
- ttxclkesc = tdsi_fclk / lp_clk_div;
+ ttxclkesc = tdsi_fclk * lp_clk_div;
lp_inter = ((tlp_avail - 8 * thsbyte_clk - 5 * tdsi_fclk) / ttxclkesc -
26) / 16;
DSSDBG("dss_runtime_put\n");
r = pm_runtime_put_sync(&dss.pdev->dev);
- WARN_ON(r < 0);
+ WARN_ON(r < 0 && r != -ENOSYS && r != -EBUSY);
}
/* DEBUGFS */
DSSDBG("hdmi_runtime_put\n");
r = pm_runtime_put_sync(&hdmi.pdev->dev);
- WARN_ON(r < 0);
+ WARN_ON(r < 0 && r != -ENOSYS);
}
static int __init hdmi_init_display(struct omap_dss_device *dssdev)
DSSDBG("rfbi_runtime_put\n");
r = pm_runtime_put_sync(&rfbi.pdev->dev);
- WARN_ON(r < 0);
+ WARN_ON(r < 0 && r != -ENOSYS);
}
void rfbi_bus_lock(void)
DSSDBG("venc_runtime_put\n");
r = pm_runtime_put_sync(&venc.pdev->dev);
- WARN_ON(r < 0);
+ WARN_ON(r < 0 && r != -ENOSYS);
}
static const struct venc_config *venc_timings_to_config(
result = (unsigned int)tmp / 1000;
dev_dbg(sfb->dev, "pixclk=%u, clk=%lu, div=%d (%lu)\n",
- pixclk, clk, result, clk / result);
+ pixclk, clk, result, result ? clk / result : clk);
return result;
}
writel(0, regs + VIDOSD_A(win, sfb->variant));
writel(0, regs + VIDOSD_B(win, sfb->variant));
writel(0, regs + VIDOSD_C(win, sfb->variant));
- reg = readl(regs + SHADOWCON);
- writel(reg & ~SHADOWCON_WINx_PROTECT(win), regs + SHADOWCON);
+
+ if (sfb->variant.has_shadowcon) {
+ reg = readl(sfb->regs + SHADOWCON);
+ reg &= ~(SHADOWCON_WINx_PROTECT(win) |
+ SHADOWCON_CHx_ENABLE(win) |
+ SHADOWCON_CHx_LOCAL_ENABLE(win));
+ writel(reg, sfb->regs + SHADOWCON);
+ }
}
static int __devinit s3c_fb_probe(struct platform_device *pdev)
/* following part not present in X11 driver */
cr67 = vga_in8(0x3d5, par) & 0xf;
vga_out8(0x3d5, 0x50 | cr67, par);
- udelay(10000);
+ mdelay(10);
vga_out8(0x3d4, 0x67, par);
/* end of part */
vga_out8(0x3d5, reg->CR67 & ~0x0c, par);
vga_out8(0x3d4, 0x66, par);
cr66 = vga_in8(0x3d5, par);
vga_out8(0x3d5, cr66 | 0x02, par);
- udelay(10000);
+ mdelay(10);
vga_out8(0x3d4, 0x66, par);
vga_out8(0x3d5, cr66 & ~0x02, par); /* clear reset flag */
- udelay(10000);
+ mdelay(10);
/*
vga_out8(0x3d4, 0x3f, par);
cr3f = vga_in8(0x3d5, par);
vga_out8(0x3d5, cr3f | 0x08, par);
- udelay(10000);
+ mdelay(10);
vga_out8(0x3d4, 0x3f, par);
vga_out8(0x3d5, cr3f & ~0x08, par); /* clear reset flags */
- udelay(10000);
+ mdelay(10);
/* Savage ramdac speeds */
par->numClocks = 4;
struct task_struct *thread;
/* Waiting for host to ack the pages we released. */
- struct completion acked;
+ wait_queue_head_t acked;
/* Number of balloon pages we've told the Host we're not using. */
unsigned int num_pages;
static void balloon_ack(struct virtqueue *vq)
{
- struct virtio_balloon *vb;
- unsigned int len;
+ struct virtio_balloon *vb = vq->vdev->priv;
- vb = virtqueue_get_buf(vq, &len);
- if (vb)
- complete(&vb->acked);
+ wake_up(&vb->acked);
}
static void tell_host(struct virtio_balloon *vb, struct virtqueue *vq)
{
struct scatterlist sg;
+ unsigned int len;
sg_init_one(&sg, vb->pfns, sizeof(vb->pfns[0]) * vb->num_pfns);
- init_completion(&vb->acked);
-
/* We should always be able to add one buffer to an empty queue. */
if (virtqueue_add_buf(vq, &sg, 1, 0, vb, GFP_KERNEL) < 0)
BUG();
virtqueue_kick(vq);
/* When host has read buffer, this completes via balloon_ack */
- wait_for_completion(&vb->acked);
+ wait_event(vb->acked, virtqueue_get_buf(vq, &len));
}
static void set_page_pfns(u32 pfns[], struct page *page)
*/
static void stats_request(struct virtqueue *vq)
{
- struct virtio_balloon *vb;
- unsigned int len;
+ struct virtio_balloon *vb = vq->vdev->priv;
- vb = virtqueue_get_buf(vq, &len);
- if (!vb)
- return;
vb->need_stats_update = 1;
wake_up(&vb->config_change);
}
{
struct virtqueue *vq;
struct scatterlist sg;
+ unsigned int len;
vb->need_stats_update = 0;
update_balloon_stats(vb);
vq = vb->stats_vq;
+ if (!virtqueue_get_buf(vq, &len))
+ return;
sg_init_one(&sg, vb->stats, sizeof(vb->stats));
if (virtqueue_add_buf(vq, &sg, 1, 0, vb, GFP_KERNEL) < 0)
BUG();
INIT_LIST_HEAD(&vb->pages);
vb->num_pages = 0;
init_waitqueue_head(&vb->config_change);
+ init_waitqueue_head(&vb->acked);
vb->vdev = vdev;
vb->need_stats_update = 0;
} __attribute__((packed));
static unsigned int hpwdt_nmi_decoding;
-static unsigned int allow_kdump;
+static unsigned int allow_kdump = 1;
static unsigned int is_icru;
static DEFINE_SPINLOCK(rom_lock);
static void *cru_rom_addr;
static void hpwdt_exit_nmi_decoding(void)
{
unregister_nmi_handler(NMI_UNKNOWN, "hpwdt");
+ unregister_nmi_handler(NMI_SERR, "hpwdt");
+ unregister_nmi_handler(NMI_IO_CHECK, "hpwdt");
if (cru_rom_addr)
iounmap(cru_rom_addr);
}
MODULE_VERSION(DRV_VERSION);
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:" DRV_NAME);
* Watchdog driver for ARM SP805 watchdog module
*
* Copyright (C) 2010 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2 or later. This program is licensed "as is" without any
module_amba_driver(sp805_wdt_driver);
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_DESCRIPTION("ARM SP805 Watchdog Driver");
MODULE_LICENSE("GPL");
sizeof(struct watchdog_info)) ? -EFAULT : 0;
case WDIOC_GETSTATUS:
err = watchdog_get_status(wdd, &val);
- if (err)
+ if (err == -ENODEV)
return err;
return put_user(val, p);
case WDIOC_GETBOOTSTATUS:
handle_edge_irq, "event");
xen_irq_info_evtchn_init(irq, evtchn);
+ } else {
+ struct irq_info *info = info_for_irq(irq);
+ WARN_ON(info == NULL || info->type != IRQT_EVTCHN);
}
out:
xen_irq_info_ipi_init(cpu, irq, evtchn, ipi);
bind_evtchn_to_cpu(evtchn, cpu);
+ } else {
+ struct irq_info *info = info_for_irq(irq);
+ WARN_ON(info == NULL || info->type != IRQT_IPI);
}
out:
xen_irq_info_virq_init(cpu, irq, evtchn, virq);
bind_evtchn_to_cpu(evtchn, cpu);
+ } else {
+ struct irq_info *info = info_for_irq(irq);
+ WARN_ON(info == NULL || info->type != IRQT_VIRQ);
}
out:
#ifdef CONFIG_ACPI
handle = DEVICE_ACPI_HANDLE(&pci_dev->dev);
- if (!handle)
+ if (!handle && pci_dev->bus->bridge)
handle = DEVICE_ACPI_HANDLE(pci_dev->bus->bridge);
#ifdef CONFIG_PCI_IOV
if (!handle && pci_dev->is_virtfn)
}
/* returns 0 if the page was successfully put into frontswap, -1 if not */
-static int tmem_frontswap_put_page(unsigned type, pgoff_t offset,
+static int tmem_frontswap_store(unsigned type, pgoff_t offset,
struct page *page)
{
u64 ind64 = (u64)offset;
* returns 0 if the page was successfully gotten from frontswap, -1 if
* was not present (should never happen!)
*/
-static int tmem_frontswap_get_page(unsigned type, pgoff_t offset,
+static int tmem_frontswap_load(unsigned type, pgoff_t offset,
struct page *page)
{
u64 ind64 = (u64)offset;
__setup("nofrontswap", no_frontswap);
static struct frontswap_ops __initdata tmem_frontswap_ops = {
- .put_page = tmem_frontswap_put_page,
- .get_page = tmem_frontswap_get_page,
+ .store = tmem_frontswap_store,
+ .load = tmem_frontswap_load,
.invalidate_page = tmem_frontswap_flush_page,
.invalidate_area = tmem_frontswap_flush_area,
.init = tmem_frontswap_init
static int add_all_parents(struct btrfs_root *root, struct btrfs_path *path,
struct ulist *parents, int level,
- struct btrfs_key *key, u64 wanted_disk_byte,
+ struct btrfs_key *key_for_search, u64 time_seq,
+ u64 wanted_disk_byte,
const u64 *extent_item_pos)
{
- int ret;
- int slot = path->slots[level];
- struct extent_buffer *eb = path->nodes[level];
+ int ret = 0;
+ int slot;
+ struct extent_buffer *eb;
+ struct btrfs_key key;
struct btrfs_file_extent_item *fi;
struct extent_inode_elem *eie = NULL;
u64 disk_byte;
- u64 wanted_objectid = key->objectid;
-add_parent:
- if (level == 0 && extent_item_pos) {
- fi = btrfs_item_ptr(eb, slot, struct btrfs_file_extent_item);
- ret = check_extent_in_eb(key, eb, fi, *extent_item_pos, &eie);
+ if (level != 0) {
+ eb = path->nodes[level];
+ ret = ulist_add(parents, eb->start, 0, GFP_NOFS);
if (ret < 0)
return ret;
- }
- ret = ulist_add(parents, eb->start, (unsigned long)eie, GFP_NOFS);
- if (ret < 0)
- return ret;
-
- if (level != 0)
return 0;
+ }
/*
- * if the current leaf is full with EXTENT_DATA items, we must
- * check the next one if that holds a reference as well.
- * ref->count cannot be used to skip this check.
- * repeat this until we don't find any additional EXTENT_DATA items.
+ * We normally enter this function with the path already pointing to
+ * the first item to check. But sometimes, we may enter it with
+ * slot==nritems. In that case, go to the next leaf before we continue.
*/
- while (1) {
- eie = NULL;
- ret = btrfs_next_leaf(root, path);
- if (ret < 0)
- return ret;
- if (ret)
- return 0;
+ if (path->slots[0] >= btrfs_header_nritems(path->nodes[0]))
+ ret = btrfs_next_old_leaf(root, path, time_seq);
+ while (!ret) {
eb = path->nodes[0];
- for (slot = 0; slot < btrfs_header_nritems(eb); ++slot) {
- btrfs_item_key_to_cpu(eb, key, slot);
- if (key->objectid != wanted_objectid ||
- key->type != BTRFS_EXTENT_DATA_KEY)
- return 0;
- fi = btrfs_item_ptr(eb, slot,
- struct btrfs_file_extent_item);
- disk_byte = btrfs_file_extent_disk_bytenr(eb, fi);
- if (disk_byte == wanted_disk_byte)
- goto add_parent;
+ slot = path->slots[0];
+
+ btrfs_item_key_to_cpu(eb, &key, slot);
+
+ if (key.objectid != key_for_search->objectid ||
+ key.type != BTRFS_EXTENT_DATA_KEY)
+ break;
+
+ fi = btrfs_item_ptr(eb, slot, struct btrfs_file_extent_item);
+ disk_byte = btrfs_file_extent_disk_bytenr(eb, fi);
+
+ if (disk_byte == wanted_disk_byte) {
+ eie = NULL;
+ if (extent_item_pos) {
+ ret = check_extent_in_eb(&key, eb, fi,
+ *extent_item_pos,
+ &eie);
+ if (ret < 0)
+ break;
+ }
+ if (!ret) {
+ ret = ulist_add(parents, eb->start,
+ (unsigned long)eie, GFP_NOFS);
+ if (ret < 0)
+ break;
+ if (!extent_item_pos) {
+ ret = btrfs_next_old_leaf(root, path,
+ time_seq);
+ continue;
+ }
+ }
}
+ ret = btrfs_next_old_item(root, path, time_seq);
}
- return 0;
+ if (ret > 0)
+ ret = 0;
+ return ret;
}
/*
struct btrfs_path *path;
struct btrfs_root *root;
struct btrfs_key root_key;
- struct btrfs_key key = {0};
struct extent_buffer *eb;
int ret = 0;
int root_level;
goto out;
eb = path->nodes[level];
- if (!eb) {
- WARN_ON(1);
- ret = 1;
- goto out;
- }
-
- if (level == 0) {
- if (ret == 1 && path->slots[0] >= btrfs_header_nritems(eb)) {
- ret = btrfs_next_leaf(root, path);
- if (ret)
- goto out;
- eb = path->nodes[0];
+ while (!eb) {
+ if (!level) {
+ WARN_ON(1);
+ ret = 1;
+ goto out;
}
-
- btrfs_item_key_to_cpu(eb, &key, path->slots[0]);
+ level--;
+ eb = path->nodes[level];
}
- ret = add_all_parents(root, path, parents, level, &key,
- ref->wanted_disk_byte, extent_item_pos);
+ ret = add_all_parents(root, path, parents, level, &ref->key_for_search,
+ time_seq, ref->wanted_disk_byte,
+ extent_item_pos);
out:
btrfs_free_path(path);
return ret;
}
ret = __add_delayed_refs(head, delayed_ref_seq,
&prefs_delayed);
+ mutex_unlock(&head->mutex);
if (ret) {
spin_unlock(&delayed_refs->lock);
goto out;
}
out:
- if (head)
- mutex_unlock(&head->mutex);
btrfs_free_path(path);
while (!list_empty(&prefs)) {
ref = list_first_entry(&prefs, struct __prelim_ref, list);
#define BTRFS_INODE_IN_DEFRAG 3
#define BTRFS_INODE_DELALLOC_META_RESERVED 4
#define BTRFS_INODE_HAS_ORPHAN_ITEM 5
+#define BTRFS_INODE_HAS_ASYNC_EXTENT 6
/* in memory btrfs inode */
struct btrfs_inode {
#include "print-tree.h"
#include "locking.h"
#include "check-integrity.h"
+#include "rcu-string.h"
#define BTRFSIC_BLOCK_HASHTABLE_SIZE 0x10000
#define BTRFSIC_BLOCK_LINK_HASHTABLE_SIZE 0x10000
superblock_tmp->never_written = 0;
superblock_tmp->mirror_num = 1 + superblock_mirror_num;
if (state->print_mask & BTRFSIC_PRINT_MASK_SUPERBLOCK_WRITE)
- printk(KERN_INFO "New initial S-block (bdev %p, %s)"
- " @%llu (%s/%llu/%d)\n",
- superblock_bdev, device->name,
- (unsigned long long)dev_bytenr,
- dev_state->name,
- (unsigned long long)dev_bytenr,
- superblock_mirror_num);
+ printk_in_rcu(KERN_INFO "New initial S-block (bdev %p, %s)"
+ " @%llu (%s/%llu/%d)\n",
+ superblock_bdev,
+ rcu_str_deref(device->name),
+ (unsigned long long)dev_bytenr,
+ dev_state->name,
+ (unsigned long long)dev_bytenr,
+ superblock_mirror_num);
list_add(&superblock_tmp->all_blocks_node,
&state->all_blocks_list);
btrfsic_block_hashtable_add(superblock_tmp,
return 0;
}
+/*
+ * This allocates memory and gets a tree modification sequence number when
+ * needed.
+ *
+ * Returns 0 when no sequence number is needed, < 0 on error.
+ * Returns 1 when a sequence number was added. In this case,
+ * fs_info->tree_mod_seq_lock was acquired and must be released by the caller
+ * after inserting into the rb tree.
+ */
static inline int tree_mod_alloc(struct btrfs_fs_info *fs_info, gfp_t flags,
struct tree_mod_elem **tm_ret)
{
*/
kfree(tm);
seq = 0;
+ spin_unlock(&fs_info->tree_mod_seq_lock);
} else {
__get_tree_mod_seq(fs_info, &tm->elem);
seq = tm->elem.seq;
}
- spin_unlock(&fs_info->tree_mod_seq_lock);
return seq;
}
tm->slot = slot;
tm->generation = btrfs_node_ptr_generation(eb, slot);
- return __tree_mod_log_insert(fs_info, tm);
+ ret = __tree_mod_log_insert(fs_info, tm);
+ spin_unlock(&fs_info->tree_mod_seq_lock);
+ return ret;
}
static noinline int
tm->move.nr_items = nr_items;
tm->op = MOD_LOG_MOVE_KEYS;
- return __tree_mod_log_insert(fs_info, tm);
+ ret = __tree_mod_log_insert(fs_info, tm);
+ spin_unlock(&fs_info->tree_mod_seq_lock);
+ return ret;
}
static noinline int
tm->generation = btrfs_header_generation(old_root);
tm->op = MOD_LOG_ROOT_REPLACE;
- return __tree_mod_log_insert(fs_info, tm);
+ ret = __tree_mod_log_insert(fs_info, tm);
+ spin_unlock(&fs_info->tree_mod_seq_lock);
+ return ret;
}
static struct tree_mod_elem *
if (!looped && !tm)
return 0;
/*
- * we must have key remove operations in the log before the
- * replace operation.
+ * if there are no tree operation for the oldest root, we simply
+ * return it. this should only happen if that (old) root is at
+ * level 0.
*/
- BUG_ON(!tm);
+ if (!tm)
+ break;
+ /*
+ * if there's an operation that's not a root replacement, we
+ * found the oldest version of our root. normally, we'll find a
+ * MOD_LOG_KEY_REMOVE_WHILE_FREEING operation here.
+ */
if (tm->op != MOD_LOG_ROOT_REPLACE)
break;
looped = 1;
}
+ /* if there's no old root to return, return what we found instead */
+ if (!found)
+ found = tm;
+
return found;
}
tm->generation);
break;
case MOD_LOG_KEY_ADD:
- if (tm->slot != n - 1) {
- o_dst = btrfs_node_key_ptr_offset(tm->slot);
- o_src = btrfs_node_key_ptr_offset(tm->slot + 1);
- memmove_extent_buffer(eb, o_dst, o_src, p_size);
- }
+ /* if a move operation is needed it's in the log */
n--;
break;
case MOD_LOG_MOVE_KEYS:
return eb_rewin;
}
+/*
+ * get_old_root() rewinds the state of @root's root node to the given @time_seq
+ * value. If there are no changes, the current root->root_node is returned. If
+ * anything changed in between, there's a fresh buffer allocated on which the
+ * rewind operations are done. In any case, the returned buffer is read locked.
+ * Returns NULL on error (with no locks held).
+ */
static inline struct extent_buffer *
get_old_root(struct btrfs_root *root, u64 time_seq)
{
struct tree_mod_elem *tm;
struct extent_buffer *eb;
- struct tree_mod_root *old_root;
- u64 old_generation;
+ struct tree_mod_root *old_root = NULL;
+ u64 old_generation = 0;
+ u64 logical;
+ eb = btrfs_read_lock_root_node(root);
tm = __tree_mod_log_oldest_root(root->fs_info, root, time_seq);
if (!tm)
return root->node;
- old_root = &tm->old_root;
- old_generation = tm->generation;
-
- tm = tree_mod_log_search(root->fs_info, old_root->logical, time_seq);
- /*
- * there was an item in the log when __tree_mod_log_oldest_root
- * returned. this one must not go away, because the time_seq passed to
- * us must be blocking its removal.
- */
- BUG_ON(!tm);
+ if (tm->op == MOD_LOG_ROOT_REPLACE) {
+ old_root = &tm->old_root;
+ old_generation = tm->generation;
+ logical = old_root->logical;
+ } else {
+ logical = root->node->start;
+ }
- if (old_root->logical == root->node->start) {
- /* there are logged operations for the current root */
+ tm = tree_mod_log_search(root->fs_info, logical, time_seq);
+ if (old_root)
+ eb = alloc_dummy_extent_buffer(logical, root->nodesize);
+ else
eb = btrfs_clone_extent_buffer(root->node);
- } else {
- /* there's a root replace operation for the current root */
- eb = alloc_dummy_extent_buffer(tm->index << PAGE_CACHE_SHIFT,
- root->nodesize);
+ btrfs_tree_read_unlock(root->node);
+ free_extent_buffer(root->node);
+ if (!eb)
+ return NULL;
+ btrfs_tree_read_lock(eb);
+ if (old_root) {
btrfs_set_header_bytenr(eb, eb->start);
btrfs_set_header_backref_rev(eb, BTRFS_MIXED_BACKREF_REV);
btrfs_set_header_owner(eb, root->root_key.objectid);
+ btrfs_set_header_level(eb, old_root->level);
+ btrfs_set_header_generation(eb, old_generation);
}
- if (!eb)
- return NULL;
- btrfs_set_header_level(eb, old_root->level);
- btrfs_set_header_generation(eb, old_generation);
- __tree_mod_log_rewind(eb, time_seq, tm);
+ if (tm)
+ __tree_mod_log_rewind(eb, time_seq, tm);
+ else
+ WARN_ON(btrfs_header_level(eb) != 0);
+ extent_buffer_get(eb);
return eb;
}
BTRFS_NODEPTRS_PER_BLOCK(root) / 4)
return 0;
- btrfs_header_nritems(mid);
-
left = read_node_slot(root, parent, pslot - 1);
if (left) {
btrfs_tree_lock(left);
wret = push_node_left(trans, root, left, mid, 1);
if (wret < 0)
ret = wret;
- btrfs_header_nritems(mid);
}
/*
again:
b = get_old_root(root, time_seq);
- extent_buffer_get(b);
level = btrfs_header_level(b);
- btrfs_tree_read_lock(b);
p->locks[level] = BTRFS_READ_LOCK;
while (b) {
static void insert_ptr(struct btrfs_trans_handle *trans,
struct btrfs_root *root, struct btrfs_path *path,
struct btrfs_disk_key *key, u64 bytenr,
- int slot, int level, int tree_mod_log)
+ int slot, int level)
{
struct extent_buffer *lower;
int nritems;
BUG_ON(slot > nritems);
BUG_ON(nritems == BTRFS_NODEPTRS_PER_BLOCK(root));
if (slot != nritems) {
- if (tree_mod_log && level)
+ if (level)
tree_mod_log_eb_move(root->fs_info, lower, slot + 1,
slot, nritems - slot);
memmove_extent_buffer(lower,
btrfs_node_key_ptr_offset(slot),
(nritems - slot) * sizeof(struct btrfs_key_ptr));
}
- if (tree_mod_log && level) {
+ if (level) {
ret = tree_mod_log_insert_key(root->fs_info, lower, slot,
MOD_LOG_KEY_ADD);
BUG_ON(ret < 0);
btrfs_mark_buffer_dirty(split);
insert_ptr(trans, root, path, &disk_key, split->start,
- path->slots[level + 1] + 1, level + 1, 1);
+ path->slots[level + 1] + 1, level + 1);
if (path->slots[level] >= mid) {
path->slots[level] -= mid;
btrfs_set_header_nritems(l, mid);
btrfs_item_key(right, &disk_key, 0);
insert_ptr(trans, root, path, &disk_key, right->start,
- path->slots[1] + 1, 1, 0);
+ path->slots[1] + 1, 1);
btrfs_mark_buffer_dirty(right);
btrfs_mark_buffer_dirty(l);
if (mid <= slot) {
btrfs_set_header_nritems(right, 0);
insert_ptr(trans, root, path, &disk_key, right->start,
- path->slots[1] + 1, 1, 0);
+ path->slots[1] + 1, 1);
btrfs_tree_unlock(path->nodes[0]);
free_extent_buffer(path->nodes[0]);
path->nodes[0] = right;
} else {
btrfs_set_header_nritems(right, 0);
insert_ptr(trans, root, path, &disk_key, right->start,
- path->slots[1], 1, 0);
+ path->slots[1], 1);
btrfs_tree_unlock(path->nodes[0]);
free_extent_buffer(path->nodes[0]);
path->nodes[0] = right;
* returns < 0 on io errors.
*/
int btrfs_next_leaf(struct btrfs_root *root, struct btrfs_path *path)
+{
+ return btrfs_next_old_leaf(root, path, 0);
+}
+
+int btrfs_next_old_leaf(struct btrfs_root *root, struct btrfs_path *path,
+ u64 time_seq)
{
int slot;
int level;
path->keep_locks = 1;
path->leave_spinning = 1;
- ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
+ if (time_seq)
+ ret = btrfs_search_old_slot(root, &key, path, time_seq);
+ else
+ ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
path->keep_locks = 0;
if (ret < 0)
if (!path->skip_locking) {
ret = btrfs_try_tree_read_lock(next);
+ if (!ret && time_seq) {
+ /*
+ * If we don't get the lock, we may be racing
+ * with push_leaf_left, holding that lock while
+ * itself waiting for the leaf we've currently
+ * locked. To solve this situation, we give up
+ * on our lock and cycle.
+ */
+ btrfs_release_path(path);
+ cond_resched();
+ goto again;
+ }
if (!ret) {
btrfs_set_path_blocking(path);
btrfs_tree_read_lock(next);
}
int btrfs_next_leaf(struct btrfs_root *root, struct btrfs_path *path);
-static inline int btrfs_next_item(struct btrfs_root *root, struct btrfs_path *p)
+int btrfs_next_old_leaf(struct btrfs_root *root, struct btrfs_path *path,
+ u64 time_seq);
+static inline int btrfs_next_old_item(struct btrfs_root *root,
+ struct btrfs_path *p, u64 time_seq)
{
++p->slots[0];
if (p->slots[0] >= btrfs_header_nritems(p->nodes[0]))
- return btrfs_next_leaf(root, p);
+ return btrfs_next_old_leaf(root, p, time_seq);
return 0;
}
+static inline int btrfs_next_item(struct btrfs_root *root, struct btrfs_path *p)
+{
+ return btrfs_next_old_item(root, p, 0);
+}
int btrfs_prev_leaf(struct btrfs_root *root, struct btrfs_path *path);
int btrfs_leaf_free_space(struct btrfs_root *root, struct extent_buffer *leaf);
int __must_check btrfs_drop_snapshot(struct btrfs_root *root,
}
}
}
+
+void btrfs_destroy_delayed_inodes(struct btrfs_root *root)
+{
+ struct btrfs_delayed_root *delayed_root;
+ struct btrfs_delayed_node *curr_node, *prev_node;
+
+ delayed_root = btrfs_get_delayed_root(root);
+
+ curr_node = btrfs_first_delayed_node(delayed_root);
+ while (curr_node) {
+ __btrfs_kill_delayed_node(curr_node);
+
+ prev_node = curr_node;
+ curr_node = btrfs_next_delayed_node(curr_node);
+ btrfs_release_delayed_node(prev_node);
+ }
+}
+
/* Used for drop dead root */
void btrfs_kill_all_delayed_nodes(struct btrfs_root *root);
+/* Used for clean the transaction */
+void btrfs_destroy_delayed_inodes(struct btrfs_root *root);
+
/* Used for readdir() */
void btrfs_get_delayed_items(struct inode *inode, struct list_head *ins_list,
struct list_head *del_list);
#include "free-space-cache.h"
#include "inode-map.h"
#include "check-integrity.h"
+#include "rcu-string.h"
static struct extent_io_ops btree_extent_io_ops;
static void end_workqueue_fn(struct btrfs_work *work);
features = btrfs_super_incompat_flags(disk_super);
features |= BTRFS_FEATURE_INCOMPAT_MIXED_BACKREF;
- if (tree_root->fs_info->compress_type & BTRFS_COMPRESS_LZO)
+ if (tree_root->fs_info->compress_type == BTRFS_COMPRESS_LZO)
features |= BTRFS_FEATURE_INCOMPAT_COMPRESS_LZO;
/*
BTRFS_CSUM_TREE_OBJECTID, csum_root);
if (ret)
goto recovery_tree_root;
-
csum_root->track_dirty = 1;
fs_info->generation = generation;
fs_info->last_trans_committed = generation;
+ ret = btrfs_recover_balance(fs_info);
+ if (ret) {
+ printk(KERN_WARNING "btrfs: failed to recover balance\n");
+ goto fail_block_groups;
+ }
+
ret = btrfs_init_dev_stats(fs_info);
if (ret) {
printk(KERN_ERR "btrfs: failed to init dev_stats: %d\n",
goto fail_trans_kthread;
}
- if (!(sb->s_flags & MS_RDONLY)) {
- down_read(&fs_info->cleanup_work_sem);
- err = btrfs_orphan_cleanup(fs_info->fs_root);
- if (!err)
- err = btrfs_orphan_cleanup(fs_info->tree_root);
- up_read(&fs_info->cleanup_work_sem);
+ if (sb->s_flags & MS_RDONLY)
+ return 0;
- if (!err)
- err = btrfs_recover_balance(fs_info->tree_root);
+ down_read(&fs_info->cleanup_work_sem);
+ if ((ret = btrfs_orphan_cleanup(fs_info->fs_root)) ||
+ (ret = btrfs_orphan_cleanup(fs_info->tree_root))) {
+ up_read(&fs_info->cleanup_work_sem);
+ close_ctree(tree_root);
+ return ret;
+ }
+ up_read(&fs_info->cleanup_work_sem);
- if (err) {
- close_ctree(tree_root);
- return err;
- }
+ ret = btrfs_resume_balance_async(fs_info);
+ if (ret) {
+ printk(KERN_WARNING "btrfs: failed to resume balance\n");
+ close_ctree(tree_root);
+ return ret;
}
return 0;
struct btrfs_device *device = (struct btrfs_device *)
bh->b_private;
- printk_ratelimited(KERN_WARNING "lost page write due to "
- "I/O error on %s\n", device->name);
+ printk_ratelimited_in_rcu(KERN_WARNING "lost page write due to "
+ "I/O error on %s\n",
+ rcu_str_deref(device->name));
/* note, we dont' set_buffer_write_io_error because we have
* our own ways of dealing with the IO errors
*/
wait_for_completion(&device->flush_wait);
if (bio_flagged(bio, BIO_EOPNOTSUPP)) {
- printk("btrfs: disabling barriers on dev %s\n",
- device->name);
+ printk_in_rcu("btrfs: disabling barriers on dev %s\n",
+ rcu_str_deref(device->name));
device->nobarriers = 1;
}
if (!bio_flagged(bio, BIO_UPTODATE)) {
delayed_refs = &trans->delayed_refs;
-again:
spin_lock(&delayed_refs->lock);
if (delayed_refs->num_entries == 0) {
spin_unlock(&delayed_refs->lock);
return ret;
}
- node = rb_first(&delayed_refs->root);
- while (node) {
+ while ((node = rb_first(&delayed_refs->root)) != NULL) {
ref = rb_entry(node, struct btrfs_delayed_ref_node, rb_node);
- node = rb_next(node);
-
- ref->in_tree = 0;
- rb_erase(&ref->rb_node, &delayed_refs->root);
- delayed_refs->num_entries--;
atomic_set(&ref->refs, 1);
if (btrfs_delayed_ref_is_head(ref)) {
struct btrfs_delayed_ref_head *head;
head = btrfs_delayed_node_to_head(ref);
- spin_unlock(&delayed_refs->lock);
- mutex_lock(&head->mutex);
+ if (!mutex_trylock(&head->mutex)) {
+ atomic_inc(&ref->refs);
+ spin_unlock(&delayed_refs->lock);
+
+ /* Need to wait for the delayed ref to run */
+ mutex_lock(&head->mutex);
+ mutex_unlock(&head->mutex);
+ btrfs_put_delayed_ref(ref);
+
+ spin_lock(&delayed_refs->lock);
+ continue;
+ }
+
kfree(head->extent_op);
delayed_refs->num_heads--;
if (list_empty(&head->cluster))
delayed_refs->num_heads_ready--;
list_del_init(&head->cluster);
- mutex_unlock(&head->mutex);
- btrfs_put_delayed_ref(ref);
- goto again;
}
+ ref->in_tree = 0;
+ rb_erase(&ref->rb_node, &delayed_refs->root);
+ delayed_refs->num_entries--;
+
spin_unlock(&delayed_refs->lock);
btrfs_put_delayed_ref(ref);
&(&BTRFS_I(page->mapping->host)->io_tree)->buffer,
offset >> PAGE_CACHE_SHIFT);
spin_unlock(&dirty_pages->buffer_lock);
- if (eb) {
+ if (eb)
ret = test_and_clear_bit(EXTENT_BUFFER_DIRTY,
&eb->bflags);
- atomic_set(&eb->refs, 1);
- }
if (PageWriteback(page))
end_page_writeback(page);
spin_unlock_irq(&page->mapping->tree_lock);
}
- page->mapping->a_ops->invalidatepage(page, 0);
unlock_page(page);
+ page_cache_release(page);
}
}
u64 start;
u64 end;
int ret;
+ bool loop = true;
unpin = pinned_extents;
+again:
while (1) {
ret = find_first_extent_bit(unpin, 0, &start, &end,
EXTENT_DIRTY);
cond_resched();
}
+ if (loop) {
+ if (unpin == &root->fs_info->freed_extents[0])
+ unpin = &root->fs_info->freed_extents[1];
+ else
+ unpin = &root->fs_info->freed_extents[0];
+ loop = false;
+ goto again;
+ }
+
return 0;
}
/* FIXME: cleanup wait for commit */
cur_trans->in_commit = 1;
cur_trans->blocked = 1;
- if (waitqueue_active(&root->fs_info->transaction_blocked_wait))
- wake_up(&root->fs_info->transaction_blocked_wait);
+ wake_up(&root->fs_info->transaction_blocked_wait);
cur_trans->blocked = 0;
- if (waitqueue_active(&root->fs_info->transaction_wait))
- wake_up(&root->fs_info->transaction_wait);
+ wake_up(&root->fs_info->transaction_wait);
cur_trans->commit_done = 1;
- if (waitqueue_active(&cur_trans->commit_wait))
- wake_up(&cur_trans->commit_wait);
+ wake_up(&cur_trans->commit_wait);
+
+ btrfs_destroy_delayed_inodes(root);
+ btrfs_assert_delayed_root_empty(root);
btrfs_destroy_pending_snapshots(cur_trans);
btrfs_destroy_marked_extents(root, &cur_trans->dirty_pages,
EXTENT_DIRTY);
+ btrfs_destroy_pinned_extent(root,
+ root->fs_info->pinned_extents);
/*
memset(cur_trans, 0, sizeof(*cur_trans));
if (waitqueue_active(&t->commit_wait))
wake_up(&t->commit_wait);
+ btrfs_destroy_delayed_inodes(root);
+ btrfs_assert_delayed_root_empty(root);
+
btrfs_destroy_pending_snapshots(t);
btrfs_destroy_delalloc_inodes(root);
return count;
}
-
static void wait_for_more_refs(struct btrfs_delayed_ref_root *delayed_refs,
- unsigned long num_refs)
+ unsigned long num_refs,
+ struct list_head *first_seq)
{
- struct list_head *first_seq = delayed_refs->seq_head.next;
-
spin_unlock(&delayed_refs->lock);
pr_debug("waiting for more refs (num %ld, first %p)\n",
num_refs, first_seq);
struct btrfs_delayed_ref_root *delayed_refs;
struct btrfs_delayed_ref_node *ref;
struct list_head cluster;
+ struct list_head *first_seq = NULL;
int ret;
u64 delayed_start;
int run_all = count == (unsigned long)-1;
*/
consider_waiting = 1;
num_refs = delayed_refs->num_entries;
+ first_seq = root->fs_info->tree_mod_seq_list.next;
} else {
- wait_for_more_refs(delayed_refs, num_refs);
+ wait_for_more_refs(delayed_refs,
+ num_refs, first_seq);
/*
* after waiting, things have changed. we
* dropped the lock and someone else might have
#include "volumes.h"
#include "check-integrity.h"
#include "locking.h"
+#include "rcu-string.h"
static struct kmem_cache *extent_state_cache;
static struct kmem_cache *extent_buffer_cache;
return -EIO;
}
- printk(KERN_INFO "btrfs read error corrected: ino %lu off %llu (dev %s "
- "sector %llu)\n", page->mapping->host->i_ino, start,
- dev->name, sector);
+ printk_in_rcu(KERN_INFO "btrfs read error corrected: ino %lu off %llu "
+ "(dev %s sector %llu)\n", page->mapping->host->i_ino,
+ start, rcu_str_deref(dev->name), sector);
bio_put(bio);
return 0;
writepage_t writepage, void *data,
void (*flush_fn)(void *))
{
+ struct inode *inode = mapping->host;
int ret = 0;
int done = 0;
int nr_to_write_done = 0;
int scanned = 0;
int tag;
+ /*
+ * We have to hold onto the inode so that ordered extents can do their
+ * work when the IO finishes. The alternative to this is failing to add
+ * an ordered extent if the igrab() fails there and that is a huge pain
+ * to deal with, so instead just hold onto the inode throughout the
+ * writepages operation. If it fails here we are freeing up the inode
+ * anyway and we'd rather not waste our time writing out stuff that is
+ * going to be truncated anyway.
+ */
+ if (!igrab(inode))
+ return 0;
+
pagevec_init(&pvec, 0);
if (wbc->range_cyclic) {
index = mapping->writeback_index; /* Start from prev offset */
index = 0;
goto retry;
}
+ btrfs_add_delayed_iput(inode);
return ret;
}
loff_t *ppos, size_t count, size_t ocount)
{
struct file *file = iocb->ki_filp;
- struct inode *inode = fdentry(file)->d_inode;
struct iov_iter i;
ssize_t written;
ssize_t written_buffered;
written = generic_file_direct_write(iocb, iov, &nr_segs, pos, ppos,
count, ocount);
- /*
- * the generic O_DIRECT will update in-memory i_size after the
- * DIOs are done. But our endio handlers that update the on
- * disk i_size never update past the in memory i_size. So we
- * need one more update here to catch any additions to the
- * file
- */
- if (inode->i_size != BTRFS_I(inode)->disk_i_size) {
- btrfs_ordered_update_i_size(inode, inode->i_size, NULL);
- mark_inode_dirty(inode);
- }
-
if (written < 0 || written == count)
return written;
end = bitmap_info->offset + (u64)(BITS_PER_BITMAP * ctl->unit) - 1;
/*
- * XXX - this can go away after a few releases.
- *
- * since the only user of btrfs_remove_free_space is the tree logging
- * stuff, and the only way to test that is under crash conditions, we
- * want to have this debug stuff here just in case somethings not
- * working. Search the bitmap for the space we are trying to use to
- * make sure its actually there. If its not there then we need to stop
- * because something has gone wrong.
+ * We need to search for bits in this bitmap. We could only cover some
+ * of the extent in this bitmap thanks to how we add space, so we need
+ * to search for as much as it as we can and clear that amount, and then
+ * go searching for the next bit.
*/
search_start = *offset;
- search_bytes = *bytes;
+ search_bytes = ctl->unit;
search_bytes = min(search_bytes, end - search_start + 1);
ret = search_bitmap(ctl, bitmap_info, &search_start, &search_bytes);
BUG_ON(ret < 0 || search_start != *offset);
- if (*offset > bitmap_info->offset && *offset + *bytes > end) {
- bitmap_clear_bits(ctl, bitmap_info, *offset, end - *offset + 1);
- *bytes -= end - *offset + 1;
- *offset = end + 1;
- } else if (*offset >= bitmap_info->offset && *offset + *bytes <= end) {
- bitmap_clear_bits(ctl, bitmap_info, *offset, *bytes);
- *bytes = 0;
- }
+ /* We may have found more bits than what we need */
+ search_bytes = min(search_bytes, *bytes);
+
+ /* Cannot clear past the end of the bitmap */
+ search_bytes = min(search_bytes, end - search_start + 1);
+
+ bitmap_clear_bits(ctl, bitmap_info, search_start, search_bytes);
+ *offset += search_bytes;
+ *bytes -= search_bytes;
if (*bytes) {
struct rb_node *next = rb_next(&bitmap_info->offset_index);
* everything over again.
*/
search_start = *offset;
- search_bytes = *bytes;
+ search_bytes = ctl->unit;
ret = search_bitmap(ctl, bitmap_info, &search_start,
&search_bytes);
if (ret < 0 || search_start != *offset)
{
struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl;
struct btrfs_free_space *info;
- struct btrfs_free_space *next_info = NULL;
int ret = 0;
spin_lock(&ctl->tree_lock);
again:
+ if (!bytes)
+ goto out_lock;
+
info = tree_search_offset(ctl, offset, 0, 0);
if (!info) {
/*
}
}
- if (info->bytes < bytes && rb_next(&info->offset_index)) {
- u64 end;
- next_info = rb_entry(rb_next(&info->offset_index),
- struct btrfs_free_space,
- offset_index);
-
- if (next_info->bitmap)
- end = next_info->offset +
- BITS_PER_BITMAP * ctl->unit - 1;
- else
- end = next_info->offset + next_info->bytes;
-
- if (next_info->bytes < bytes ||
- next_info->offset > offset || offset > end) {
- printk(KERN_CRIT "Found free space at %llu, size %llu,"
- " trying to use %llu\n",
- (unsigned long long)info->offset,
- (unsigned long long)info->bytes,
- (unsigned long long)bytes);
- WARN_ON(1);
- ret = -EINVAL;
- goto out_lock;
- }
-
- info = next_info;
- }
-
- if (info->bytes == bytes) {
+ if (!info->bitmap) {
unlink_free_space(ctl, info);
- if (info->bitmap) {
- kfree(info->bitmap);
- ctl->total_bitmaps--;
- }
- kmem_cache_free(btrfs_free_space_cachep, info);
- ret = 0;
- goto out_lock;
- }
-
- if (!info->bitmap && info->offset == offset) {
- unlink_free_space(ctl, info);
- info->offset += bytes;
- info->bytes -= bytes;
- ret = link_free_space(ctl, info);
- WARN_ON(ret);
- goto out_lock;
- }
+ if (offset == info->offset) {
+ u64 to_free = min(bytes, info->bytes);
+
+ info->bytes -= to_free;
+ info->offset += to_free;
+ if (info->bytes) {
+ ret = link_free_space(ctl, info);
+ WARN_ON(ret);
+ } else {
+ kmem_cache_free(btrfs_free_space_cachep, info);
+ }
- if (!info->bitmap && info->offset <= offset &&
- info->offset + info->bytes >= offset + bytes) {
- u64 old_start = info->offset;
- /*
- * we're freeing space in the middle of the info,
- * this can happen during tree log replay
- *
- * first unlink the old info and then
- * insert it again after the hole we're creating
- */
- unlink_free_space(ctl, info);
- if (offset + bytes < info->offset + info->bytes) {
- u64 old_end = info->offset + info->bytes;
+ offset += to_free;
+ bytes -= to_free;
+ goto again;
+ } else {
+ u64 old_end = info->bytes + info->offset;
- info->offset = offset + bytes;
- info->bytes = old_end - info->offset;
+ info->bytes = offset - info->offset;
ret = link_free_space(ctl, info);
WARN_ON(ret);
if (ret)
goto out_lock;
- } else {
- /* the hole we're creating ends at the end
- * of the info struct, just free the info
- */
- kmem_cache_free(btrfs_free_space_cachep, info);
- }
- spin_unlock(&ctl->tree_lock);
- /* step two, insert a new info struct to cover
- * anything before the hole
- */
- ret = btrfs_add_free_space(block_group, old_start,
- offset - old_start);
- WARN_ON(ret); /* -ENOMEM */
- goto out;
+ /* Not enough bytes in this entry to satisfy us */
+ if (old_end < offset + bytes) {
+ bytes -= old_end - offset;
+ offset = old_end;
+ goto again;
+ } else if (old_end == offset + bytes) {
+ /* all done */
+ goto out_lock;
+ }
+ spin_unlock(&ctl->tree_lock);
+
+ ret = btrfs_add_free_space(block_group, offset + bytes,
+ old_end - (offset + bytes));
+ WARN_ON(ret);
+ goto out;
+ }
}
ret = remove_from_bitmap(ctl, info, &offset, &bytes);
if (IS_ERR(trans)) {
extent_clear_unlock_delalloc(inode,
&BTRFS_I(inode)->io_tree,
- start, end, NULL,
+ start, end, locked_page,
EXTENT_CLEAR_UNLOCK_PAGE |
EXTENT_CLEAR_UNLOCK |
EXTENT_CLEAR_DELALLOC |
out_unlock:
extent_clear_unlock_delalloc(inode,
&BTRFS_I(inode)->io_tree,
- start, end, NULL,
+ start, end, locked_page,
EXTENT_CLEAR_UNLOCK_PAGE |
EXTENT_CLEAR_UNLOCK |
EXTENT_CLEAR_DELALLOC |
compress_file_range(async_cow->inode, async_cow->locked_page,
async_cow->start, async_cow->end, async_cow,
&num_added);
- if (num_added == 0)
+ if (num_added == 0) {
+ btrfs_add_delayed_iput(async_cow->inode);
async_cow->inode = NULL;
+ }
}
/*
{
struct async_cow *async_cow;
async_cow = container_of(work, struct async_cow, work);
+ if (async_cow->inode)
+ btrfs_add_delayed_iput(async_cow->inode);
kfree(async_cow);
}
while (start < end) {
async_cow = kmalloc(sizeof(*async_cow), GFP_NOFS);
BUG_ON(!async_cow); /* -ENOMEM */
- async_cow->inode = inode;
+ async_cow->inode = igrab(inode);
async_cow->root = root;
async_cow->locked_page = locked_page;
async_cow->start = start;
u64 ino = btrfs_ino(inode);
path = btrfs_alloc_path();
- if (!path)
+ if (!path) {
+ extent_clear_unlock_delalloc(inode,
+ &BTRFS_I(inode)->io_tree,
+ start, end, locked_page,
+ EXTENT_CLEAR_UNLOCK_PAGE |
+ EXTENT_CLEAR_UNLOCK |
+ EXTENT_CLEAR_DELALLOC |
+ EXTENT_CLEAR_DIRTY |
+ EXTENT_SET_WRITEBACK |
+ EXTENT_END_WRITEBACK);
return -ENOMEM;
+ }
nolock = btrfs_is_free_space_inode(root, inode);
trans = btrfs_join_transaction(root);
if (IS_ERR(trans)) {
+ extent_clear_unlock_delalloc(inode,
+ &BTRFS_I(inode)->io_tree,
+ start, end, locked_page,
+ EXTENT_CLEAR_UNLOCK_PAGE |
+ EXTENT_CLEAR_UNLOCK |
+ EXTENT_CLEAR_DELALLOC |
+ EXTENT_CLEAR_DIRTY |
+ EXTENT_SET_WRITEBACK |
+ EXTENT_END_WRITEBACK);
btrfs_free_path(path);
return PTR_ERR(trans);
}
}
btrfs_release_path(path);
- if (cur_offset <= end && cow_start == (u64)-1)
+ if (cur_offset <= end && cow_start == (u64)-1) {
cow_start = cur_offset;
+ cur_offset = end;
+ }
+
if (cow_start != (u64)-1) {
ret = cow_file_range(inode, locked_page, cow_start, end,
page_started, nr_written, 1);
if (!ret)
ret = err;
+ if (ret && cur_offset < end)
+ extent_clear_unlock_delalloc(inode,
+ &BTRFS_I(inode)->io_tree,
+ cur_offset, end, locked_page,
+ EXTENT_CLEAR_UNLOCK_PAGE |
+ EXTENT_CLEAR_UNLOCK |
+ EXTENT_CLEAR_DELALLOC |
+ EXTENT_CLEAR_DIRTY |
+ EXTENT_SET_WRITEBACK |
+ EXTENT_END_WRITEBACK);
+
btrfs_free_path(path);
return ret;
}
int ret;
struct btrfs_root *root = BTRFS_I(inode)->root;
- if (BTRFS_I(inode)->flags & BTRFS_INODE_NODATACOW)
+ if (BTRFS_I(inode)->flags & BTRFS_INODE_NODATACOW) {
ret = run_delalloc_nocow(inode, locked_page, start, end,
page_started, 1, nr_written);
- else if (BTRFS_I(inode)->flags & BTRFS_INODE_PREALLOC)
+ } else if (BTRFS_I(inode)->flags & BTRFS_INODE_PREALLOC) {
ret = run_delalloc_nocow(inode, locked_page, start, end,
page_started, 0, nr_written);
- else if (!btrfs_test_opt(root, COMPRESS) &&
- !(BTRFS_I(inode)->force_compress) &&
- !(BTRFS_I(inode)->flags & BTRFS_INODE_COMPRESS))
+ } else if (!btrfs_test_opt(root, COMPRESS) &&
+ !(BTRFS_I(inode)->force_compress) &&
+ !(BTRFS_I(inode)->flags & BTRFS_INODE_COMPRESS)) {
ret = cow_file_range(inode, locked_page, start, end,
page_started, nr_written, 1);
- else
+ } else {
+ set_bit(BTRFS_INODE_HAS_ASYNC_EXTENT,
+ &BTRFS_I(inode)->runtime_flags);
ret = cow_file_range_async(inode, locked_page, start, end,
page_started, nr_written);
+ }
return ret;
}
btrfs_wait_ordered_range(inode, 0, (u64)-1);
if (root->fs_info->log_root_recovering) {
- BUG_ON(!test_bit(BTRFS_INODE_HAS_ORPHAN_ITEM,
+ BUG_ON(test_bit(BTRFS_INODE_HAS_ORPHAN_ITEM,
&BTRFS_I(inode)->runtime_flags));
goto no_delete;
}
bh_result->b_size = len;
bh_result->b_bdev = em->bdev;
set_buffer_mapped(bh_result);
- if (create && !test_bit(EXTENT_FLAG_PREALLOC, &em->flags))
- set_buffer_new(bh_result);
+ if (create) {
+ if (!test_bit(EXTENT_FLAG_PREALLOC, &em->flags))
+ set_buffer_new(bh_result);
+
+ /*
+ * Need to update the i_size under the extent lock so buffered
+ * readers will get the updated i_size when we unlock.
+ */
+ if (start + len > i_size_read(inode))
+ i_size_write(inode, start + len);
+ }
free_extent_map(em);
*/
ordered = btrfs_lookup_ordered_range(inode, lockstart,
lockend - lockstart + 1);
- if (!ordered)
+
+ /*
+ * We need to make sure there are no buffered pages in this
+ * range either, we could have raced between the invalidate in
+ * generic_file_direct_write and locking the extent. The
+ * invalidate needs to happen so that reads after a write do not
+ * get stale data.
+ */
+ if (!ordered && (!writing ||
+ !test_range_bit(&BTRFS_I(inode)->io_tree,
+ lockstart, lockend, EXTENT_UPTODATE, 0,
+ cached_state)))
break;
+
unlock_extent_cached(&BTRFS_I(inode)->io_tree, lockstart, lockend,
&cached_state, GFP_NOFS);
- btrfs_start_ordered_extent(inode, ordered, 1);
- btrfs_put_ordered_extent(ordered);
+
+ if (ordered) {
+ btrfs_start_ordered_extent(inode, ordered, 1);
+ btrfs_put_ordered_extent(ordered);
+ } else {
+ /* Screw you mmap */
+ ret = filemap_write_and_wait_range(file->f_mapping,
+ lockstart,
+ lockend);
+ if (ret)
+ goto out;
+
+ /*
+ * If we found a page that couldn't be invalidated just
+ * fall back to buffered.
+ */
+ ret = invalidate_inode_pages2_range(file->f_mapping,
+ lockstart >> PAGE_CACHE_SHIFT,
+ lockend >> PAGE_CACHE_SHIFT);
+ if (ret) {
+ if (ret == -EBUSY)
+ ret = 0;
+ goto out;
+ }
+ }
+
cond_resched();
}
else
b_inode->flags &= ~BTRFS_INODE_NODATACOW;
- if (b_dir->flags & BTRFS_INODE_COMPRESS)
+ if (b_dir->flags & BTRFS_INODE_COMPRESS) {
b_inode->flags |= BTRFS_INODE_COMPRESS;
- else
- b_inode->flags &= ~BTRFS_INODE_COMPRESS;
+ b_inode->flags &= ~BTRFS_INODE_NOCOMPRESS;
+ } else {
+ b_inode->flags &= ~(BTRFS_INODE_COMPRESS |
+ BTRFS_INODE_NOCOMPRESS);
+ }
}
static int btrfs_rename(struct inode *old_dir, struct dentry *old_dentry,
#include "locking.h"
#include "inode-map.h"
#include "backref.h"
+#include "rcu-string.h"
/* Mask out flags that are inappropriate for the given type of inode. */
static inline __u32 btrfs_mask_flags(umode_t mode, __u32 flags)
return -ENOENT;
}
-/*
- * Validaty check of prev em and next em:
- * 1) no prev/next em
- * 2) prev/next em is an hole/inline extent
- */
-static int check_adjacent_extents(struct inode *inode, struct extent_map *em)
+static struct extent_map *defrag_lookup_extent(struct inode *inode, u64 start)
{
struct extent_map_tree *em_tree = &BTRFS_I(inode)->extent_tree;
- struct extent_map *prev = NULL, *next = NULL;
- int ret = 0;
+ struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree;
+ struct extent_map *em;
+ u64 len = PAGE_CACHE_SIZE;
+ /*
+ * hopefully we have this extent in the tree already, try without
+ * the full extent lock
+ */
read_lock(&em_tree->lock);
- prev = lookup_extent_mapping(em_tree, em->start - 1, (u64)-1);
- next = lookup_extent_mapping(em_tree, em->start + em->len, (u64)-1);
+ em = lookup_extent_mapping(em_tree, start, len);
read_unlock(&em_tree->lock);
- if ((!prev || prev->block_start >= EXTENT_MAP_LAST_BYTE) &&
- (!next || next->block_start >= EXTENT_MAP_LAST_BYTE))
- ret = 1;
- free_extent_map(prev);
- free_extent_map(next);
+ if (!em) {
+ /* get the big lock and read metadata off disk */
+ lock_extent(io_tree, start, start + len - 1);
+ em = btrfs_get_extent(inode, NULL, 0, start, len, 0);
+ unlock_extent(io_tree, start, start + len - 1);
+
+ if (IS_ERR(em))
+ return NULL;
+ }
+
+ return em;
+}
+
+static bool defrag_check_next_extent(struct inode *inode, struct extent_map *em)
+{
+ struct extent_map *next;
+ bool ret = true;
+ /* this is the last extent */
+ if (em->start + em->len >= i_size_read(inode))
+ return false;
+
+ next = defrag_lookup_extent(inode, em->start + em->len);
+ if (!next || next->block_start >= EXTENT_MAP_LAST_BYTE)
+ ret = false;
+
+ free_extent_map(next);
return ret;
}
-static int should_defrag_range(struct inode *inode, u64 start, u64 len,
- int thresh, u64 *last_len, u64 *skip,
- u64 *defrag_end)
+static int should_defrag_range(struct inode *inode, u64 start, int thresh,
+ u64 *last_len, u64 *skip, u64 *defrag_end)
{
- struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree;
- struct extent_map *em = NULL;
- struct extent_map_tree *em_tree = &BTRFS_I(inode)->extent_tree;
+ struct extent_map *em;
int ret = 1;
+ bool next_mergeable = true;
/*
* make sure that once we start defragging an extent, we keep on
*skip = 0;
- /*
- * hopefully we have this extent in the tree already, try without
- * the full extent lock
- */
- read_lock(&em_tree->lock);
- em = lookup_extent_mapping(em_tree, start, len);
- read_unlock(&em_tree->lock);
-
- if (!em) {
- /* get the big lock and read metadata off disk */
- lock_extent(io_tree, start, start + len - 1);
- em = btrfs_get_extent(inode, NULL, 0, start, len, 0);
- unlock_extent(io_tree, start, start + len - 1);
-
- if (IS_ERR(em))
- return 0;
- }
+ em = defrag_lookup_extent(inode, start);
+ if (!em)
+ return 0;
/* this will cover holes, and inline extents */
if (em->block_start >= EXTENT_MAP_LAST_BYTE) {
goto out;
}
- /* If we have nothing to merge with us, just skip. */
- if (check_adjacent_extents(inode, em)) {
- ret = 0;
- goto out;
- }
+ next_mergeable = defrag_check_next_extent(inode, em);
/*
- * we hit a real extent, if it is big don't bother defragging it again
+ * we hit a real extent, if it is big or the next extent is not a
+ * real extent, don't bother defragging it
*/
- if ((*last_len == 0 || *last_len >= thresh) && em->len >= thresh)
+ if ((*last_len == 0 || *last_len >= thresh) &&
+ (em->len >= thresh || !next_mergeable))
ret = 0;
-
out:
/*
* last_len ends up being a counter of how many bytes we've defragged.
break;
if (!should_defrag_range(inode, (u64)i << PAGE_CACHE_SHIFT,
- PAGE_CACHE_SIZE, extent_thresh,
- &last_len, &skip, &defrag_end)) {
+ extent_thresh, &last_len, &skip,
+ &defrag_end)) {
unsigned long next;
/*
* the should_defrag function tells us how much to skip
ret = -EINVAL;
goto out_free;
}
+ if (device->fs_devices && device->fs_devices->seeding) {
+ printk(KERN_INFO "btrfs: resizer unable to apply on "
+ "seeding device %llu\n",
+ (unsigned long long)devid);
+ ret = -EINVAL;
+ goto out_free;
+ }
+
if (!strcmp(sizestr, "max"))
new_size = device->bdev->bd_inode->i_size;
else {
do_div(new_size, root->sectorsize);
new_size *= root->sectorsize;
- printk(KERN_INFO "btrfs: new size for %s is %llu\n",
- device->name, (unsigned long long)new_size);
+ printk_in_rcu(KERN_INFO "btrfs: new size for %s is %llu\n",
+ rcu_str_deref(device->name),
+ (unsigned long long)new_size);
if (new_size > old_size) {
trans = btrfs_start_transaction(root, 0);
di_args->total_bytes = dev->total_bytes;
memcpy(di_args->uuid, dev->uuid, sizeof(di_args->uuid));
if (dev->name) {
- strncpy(di_args->path, dev->name, sizeof(di_args->path));
+ struct rcu_string *name;
+
+ rcu_read_lock();
+ name = rcu_dereference(dev->name);
+ strncpy(di_args->path, name->str, sizeof(di_args->path));
+ rcu_read_unlock();
di_args->path[sizeof(di_args->path) - 1] = 0;
} else {
di_args->path[0] = '\0';
#define BTRFS_IOC_WAIT_SYNC _IOW(BTRFS_IOCTL_MAGIC, 22, __u64)
#define BTRFS_IOC_SNAP_CREATE_V2 _IOW(BTRFS_IOCTL_MAGIC, 23, \
struct btrfs_ioctl_vol_args_v2)
-#define BTRFS_IOC_SUBVOL_GETFLAGS _IOW(BTRFS_IOCTL_MAGIC, 25, __u64)
+#define BTRFS_IOC_SUBVOL_GETFLAGS _IOR(BTRFS_IOCTL_MAGIC, 25, __u64)
#define BTRFS_IOC_SUBVOL_SETFLAGS _IOW(BTRFS_IOCTL_MAGIC, 26, __u64)
#define BTRFS_IOC_SCRUB _IOWR(BTRFS_IOCTL_MAGIC, 27, \
struct btrfs_ioctl_scrub_args)
/* start IO across the range first to instantiate any delalloc
* extents
*/
- filemap_write_and_wait_range(inode->i_mapping, start, orig_end);
+ filemap_fdatawrite_range(inode->i_mapping, start, orig_end);
+
+ /*
+ * So with compression we will find and lock a dirty page and clear the
+ * first one as dirty, setup an async extent, and immediately return
+ * with the entire range locked but with nobody actually marked with
+ * writeback. So we can't just filemap_write_and_wait_range() and
+ * expect it to work since it will just kick off a thread to do the
+ * actual work. So we need to call filemap_fdatawrite_range _again_
+ * since it will wait on the page lock, which won't be unlocked until
+ * after the pages have been marked as writeback and so we're good to go
+ * from there. We have to do this otherwise we'll miss the ordered
+ * extents and that results in badness. Please Josef, do not think you
+ * know better and pull this out at some point in the future, it is
+ * right and you are wrong.
+ */
+ if (test_bit(BTRFS_INODE_HAS_ASYNC_EXTENT,
+ &BTRFS_I(inode)->runtime_flags))
+ filemap_fdatawrite_range(inode->i_mapping, start, orig_end);
+
+ filemap_fdatawait_range(inode->i_mapping, start, orig_end);
end = orig_end;
found = 0;
--- /dev/null
+/*
+ * Copyright (C) 2012 Red Hat. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License v2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this program; if not, write to the
+ * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 021110-1307, USA.
+ */
+
+struct rcu_string {
+ struct rcu_head rcu;
+ char str[0];
+};
+
+static inline struct rcu_string *rcu_string_strdup(const char *src, gfp_t mask)
+{
+ size_t len = strlen(src) + 1;
+ struct rcu_string *ret = kzalloc(sizeof(struct rcu_string) +
+ (len * sizeof(char)), mask);
+ if (!ret)
+ return ret;
+ strncpy(ret->str, src, len);
+ return ret;
+}
+
+static inline void rcu_string_free(struct rcu_string *str)
+{
+ if (str)
+ kfree_rcu(str, rcu);
+}
+
+#define printk_in_rcu(fmt, ...) do { \
+ rcu_read_lock(); \
+ printk(fmt, __VA_ARGS__); \
+ rcu_read_unlock(); \
+} while (0)
+
+#define printk_ratelimited_in_rcu(fmt, ...) do { \
+ rcu_read_lock(); \
+ printk_ratelimited(fmt, __VA_ARGS__); \
+ rcu_read_unlock(); \
+} while (0)
+
+#define rcu_str_deref(rcu_str) ({ \
+ struct rcu_string *__str = rcu_dereference(rcu_str); \
+ __str->str; \
+})
#include "backref.h"
#include "extent_io.h"
#include "check-integrity.h"
+#include "rcu-string.h"
/*
* This is only the first step towards a full-features scrub. It reads all
* hold all of the paths here
*/
for (i = 0; i < ipath->fspath->elem_cnt; ++i)
- printk(KERN_WARNING "btrfs: %s at logical %llu on dev "
+ printk_in_rcu(KERN_WARNING "btrfs: %s at logical %llu on dev "
"%s, sector %llu, root %llu, inode %llu, offset %llu, "
"length %llu, links %u (path: %s)\n", swarn->errstr,
- swarn->logical, swarn->dev->name,
+ swarn->logical, rcu_str_deref(swarn->dev->name),
(unsigned long long)swarn->sector, root, inum, offset,
min(isize - offset, (u64)PAGE_SIZE), nlink,
(char *)(unsigned long)ipath->fspath->val[i]);
return 0;
err:
- printk(KERN_WARNING "btrfs: %s at logical %llu on dev "
+ printk_in_rcu(KERN_WARNING "btrfs: %s at logical %llu on dev "
"%s, sector %llu, root %llu, inode %llu, offset %llu: path "
"resolving failed with ret=%d\n", swarn->errstr,
- swarn->logical, swarn->dev->name,
+ swarn->logical, rcu_str_deref(swarn->dev->name),
(unsigned long long)swarn->sector, root, inum, offset, ret);
free_ipath(ipath);
do {
ret = tree_backref_for_extent(&ptr, eb, ei, item_size,
&ref_root, &ref_level);
- printk(KERN_WARNING
+ printk_in_rcu(KERN_WARNING
"btrfs: %s at logical %llu on dev %s, "
"sector %llu: metadata %s (level %d) in tree "
- "%llu\n", errstr, swarn.logical, dev->name,
+ "%llu\n", errstr, swarn.logical,
+ rcu_str_deref(dev->name),
(unsigned long long)swarn.sector,
ref_level ? "node" : "leaf",
ret < 0 ? -1 : ref_level,
spin_lock(&sdev->stat_lock);
++sdev->stat.uncorrectable_errors;
spin_unlock(&sdev->stat_lock);
- printk_ratelimited(KERN_ERR
+
+ printk_ratelimited_in_rcu(KERN_ERR
"btrfs: unable to fixup (nodatasum) error at logical %llu on dev %s\n",
- (unsigned long long)fixup->logical, sdev->dev->name);
+ (unsigned long long)fixup->logical,
+ rcu_str_deref(sdev->dev->name));
}
btrfs_free_path(path);
spin_lock(&sdev->stat_lock);
sdev->stat.corrected_errors++;
spin_unlock(&sdev->stat_lock);
- printk_ratelimited(KERN_ERR
+ printk_ratelimited_in_rcu(KERN_ERR
"btrfs: fixed up error at logical %llu on dev %s\n",
- (unsigned long long)logical, sdev->dev->name);
+ (unsigned long long)logical,
+ rcu_str_deref(sdev->dev->name));
}
} else {
did_not_correct_error:
spin_lock(&sdev->stat_lock);
sdev->stat.uncorrectable_errors++;
spin_unlock(&sdev->stat_lock);
- printk_ratelimited(KERN_ERR
+ printk_ratelimited_in_rcu(KERN_ERR
"btrfs: unable to fixup (regular) error at logical %llu on dev %s\n",
- (unsigned long long)logical, sdev->dev->name);
+ (unsigned long long)logical,
+ rcu_str_deref(sdev->dev->name));
}
out:
#include "version.h"
#include "export.h"
#include "compression.h"
+#include "rcu-string.h"
#define CREATE_TRACE_POINTS
#include <trace/events/btrfs.h>
if (ret)
goto restore;
+ ret = btrfs_resume_balance_async(fs_info);
+ if (ret)
+ goto restore;
+
sb->s_flags &= ~MS_RDONLY;
}
"error %d\n", btrfs_ino(inode), ret);
}
+static int btrfs_show_devname(struct seq_file *m, struct dentry *root)
+{
+ struct btrfs_fs_info *fs_info = btrfs_sb(root->d_sb);
+ struct btrfs_fs_devices *cur_devices;
+ struct btrfs_device *dev, *first_dev = NULL;
+ struct list_head *head;
+ struct rcu_string *name;
+
+ mutex_lock(&fs_info->fs_devices->device_list_mutex);
+ cur_devices = fs_info->fs_devices;
+ while (cur_devices) {
+ head = &cur_devices->devices;
+ list_for_each_entry(dev, head, dev_list) {
+ if (!first_dev || dev->devid < first_dev->devid)
+ first_dev = dev;
+ }
+ cur_devices = cur_devices->seed;
+ }
+
+ if (first_dev) {
+ rcu_read_lock();
+ name = rcu_dereference(first_dev->name);
+ seq_escape(m, name->str, " \t\n\\");
+ rcu_read_unlock();
+ } else {
+ WARN_ON(1);
+ }
+ mutex_unlock(&fs_info->fs_devices->device_list_mutex);
+ return 0;
+}
+
static const struct super_operations btrfs_super_ops = {
.drop_inode = btrfs_drop_inode,
.evict_inode = btrfs_evict_inode,
.put_super = btrfs_put_super,
.sync_fs = btrfs_sync_fs,
.show_options = btrfs_show_options,
+ .show_devname = btrfs_show_devname,
.write_inode = btrfs_write_inode,
.dirty_inode = btrfs_fs_dirty_inode,
.alloc_inode = btrfs_alloc_inode,
kmem_cache_free(btrfs_transaction_cachep, cur_trans);
cur_trans = fs_info->running_transaction;
goto loop;
+ } else if (root->fs_info->fs_state & BTRFS_SUPER_FLAG_ERROR) {
+ spin_unlock(&root->fs_info->trans_lock);
+ kmem_cache_free(btrfs_transaction_cachep, cur_trans);
+ return -EROFS;
}
atomic_set(&cur_trans->num_writers, 1);
static void cleanup_transaction(struct btrfs_trans_handle *trans,
- struct btrfs_root *root)
+ struct btrfs_root *root, int err)
{
struct btrfs_transaction *cur_trans = trans->transaction;
WARN_ON(trans->use_count > 1);
+ btrfs_abort_transaction(trans, root, err);
+
spin_lock(&root->fs_info->trans_lock);
list_del_init(&cur_trans->list);
+ if (cur_trans == root->fs_info->running_transaction) {
+ root->fs_info->running_transaction = NULL;
+ root->fs_info->trans_no_join = 0;
+ }
spin_unlock(&root->fs_info->trans_lock);
btrfs_cleanup_one_transaction(trans->transaction, root);
// WARN_ON(1);
if (current->journal_info == trans)
current->journal_info = NULL;
- cleanup_transaction(trans, root);
+ cleanup_transaction(trans, root, ret);
return ret;
}
kfree(name);
iput(inode);
+
+ btrfs_run_delayed_items(trans, root);
return ret;
}
ret = btrfs_unlink_inode(trans, root, dir,
inode, victim_name,
victim_name_len);
+ btrfs_run_delayed_items(trans, root);
}
kfree(victim_name);
ptr = (unsigned long)(victim_ref + 1) + victim_name_len;
ret = btrfs_unlink_inode(trans, root, dir, inode,
name, name_len);
BUG_ON(ret);
+
+ btrfs_run_delayed_items(trans, root);
+
kfree(name);
iput(inode);
#include "volumes.h"
#include "async-thread.h"
#include "check-integrity.h"
+#include "rcu-string.h"
static int init_first_rw_device(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
device = list_entry(fs_devices->devices.next,
struct btrfs_device, dev_list);
list_del(&device->dev_list);
- kfree(device->name);
+ rcu_string_free(device->name);
kfree(device);
}
kfree(fs_devices);
{
struct btrfs_device *device;
struct btrfs_fs_devices *fs_devices;
+ struct rcu_string *name;
u64 found_transid = btrfs_super_generation(disk_super);
- char *name;
fs_devices = find_fsid(disk_super->fsid);
if (!fs_devices) {
memcpy(device->uuid, disk_super->dev_item.uuid,
BTRFS_UUID_SIZE);
spin_lock_init(&device->io_lock);
- device->name = kstrdup(path, GFP_NOFS);
- if (!device->name) {
+
+ name = rcu_string_strdup(path, GFP_NOFS);
+ if (!name) {
kfree(device);
return -ENOMEM;
}
+ rcu_assign_pointer(device->name, name);
INIT_LIST_HEAD(&device->dev_alloc_list);
/* init readahead state */
device->fs_devices = fs_devices;
fs_devices->num_devices++;
- } else if (!device->name || strcmp(device->name, path)) {
- name = kstrdup(path, GFP_NOFS);
+ } else if (!device->name || strcmp(device->name->str, path)) {
+ name = rcu_string_strdup(path, GFP_NOFS);
if (!name)
return -ENOMEM;
- kfree(device->name);
- device->name = name;
+ rcu_string_free(device->name);
+ rcu_assign_pointer(device->name, name);
if (device->missing) {
fs_devices->missing_devices--;
device->missing = 0;
/* We have held the volume lock, it is safe to get the devices. */
list_for_each_entry(orig_dev, &orig->devices, dev_list) {
+ struct rcu_string *name;
+
device = kzalloc(sizeof(*device), GFP_NOFS);
if (!device)
goto error;
- device->name = kstrdup(orig_dev->name, GFP_NOFS);
- if (!device->name) {
+ /*
+ * This is ok to do without rcu read locked because we hold the
+ * uuid mutex so nothing we touch in here is going to disappear.
+ */
+ name = rcu_string_strdup(orig_dev->name->str, GFP_NOFS);
+ if (!name) {
kfree(device);
goto error;
}
+ rcu_assign_pointer(device->name, name);
device->devid = orig_dev->devid;
device->work.func = pending_bios_fn;
}
list_del_init(&device->dev_list);
fs_devices->num_devices--;
- kfree(device->name);
+ rcu_string_free(device->name);
kfree(device);
}
if (device->bdev)
blkdev_put(device->bdev, device->mode);
- kfree(device->name);
+ rcu_string_free(device->name);
kfree(device);
}
mutex_lock(&fs_devices->device_list_mutex);
list_for_each_entry(device, &fs_devices->devices, dev_list) {
struct btrfs_device *new_device;
+ struct rcu_string *name;
if (device->bdev)
fs_devices->open_devices--;
new_device = kmalloc(sizeof(*new_device), GFP_NOFS);
BUG_ON(!new_device); /* -ENOMEM */
memcpy(new_device, device, sizeof(*new_device));
- new_device->name = kstrdup(device->name, GFP_NOFS);
- BUG_ON(device->name && !new_device->name); /* -ENOMEM */
+
+ /* Safe because we are under uuid_mutex */
+ name = rcu_string_strdup(device->name->str, GFP_NOFS);
+ BUG_ON(device->name && !name); /* -ENOMEM */
+ rcu_assign_pointer(new_device->name, name);
new_device->bdev = NULL;
new_device->writeable = 0;
new_device->in_fs_metadata = 0;
if (!device->name)
continue;
- bdev = blkdev_get_by_path(device->name, flags, holder);
+ bdev = blkdev_get_by_path(device->name->str, flags, holder);
if (IS_ERR(bdev)) {
- printk(KERN_INFO "open %s failed\n", device->name);
+ printk(KERN_INFO "open %s failed\n", device->name->str);
goto error;
}
filemap_write_and_wait(bdev->bd_inode->i_mapping);
struct block_device *bdev;
struct list_head *devices;
struct super_block *sb = root->fs_info->sb;
+ struct rcu_string *name;
u64 total_bytes;
int seeding_dev = 0;
int ret = 0;
goto error;
}
- device->name = kstrdup(device_path, GFP_NOFS);
- if (!device->name) {
+ name = rcu_string_strdup(device_path, GFP_NOFS);
+ if (!name) {
kfree(device);
ret = -ENOMEM;
goto error;
}
+ rcu_assign_pointer(device->name, name);
ret = find_next_devid(root, &device->devid);
if (ret) {
- kfree(device->name);
+ rcu_string_free(device->name);
kfree(device);
goto error;
}
trans = btrfs_start_transaction(root, 0);
if (IS_ERR(trans)) {
- kfree(device->name);
+ rcu_string_free(device->name);
kfree(device);
ret = PTR_ERR(trans);
goto error;
unlock_chunks(root);
btrfs_abort_transaction(trans, root, ret);
btrfs_end_transaction(trans, root);
- kfree(device->name);
+ rcu_string_free(device->name);
kfree(device);
error:
blkdev_put(bdev, FMODE_EXCL);
static int balance_kthread(void *data)
{
- struct btrfs_balance_control *bctl =
- (struct btrfs_balance_control *)data;
- struct btrfs_fs_info *fs_info = bctl->fs_info;
+ struct btrfs_fs_info *fs_info = data;
int ret = 0;
mutex_lock(&fs_info->volume_mutex);
mutex_lock(&fs_info->balance_mutex);
- set_balance_control(bctl);
-
- if (btrfs_test_opt(fs_info->tree_root, SKIP_BALANCE)) {
- printk(KERN_INFO "btrfs: force skipping balance\n");
- } else {
+ if (fs_info->balance_ctl) {
printk(KERN_INFO "btrfs: continuing balance\n");
- ret = btrfs_balance(bctl, NULL);
+ ret = btrfs_balance(fs_info->balance_ctl, NULL);
}
mutex_unlock(&fs_info->balance_mutex);
mutex_unlock(&fs_info->volume_mutex);
+
return ret;
}
-int btrfs_recover_balance(struct btrfs_root *tree_root)
+int btrfs_resume_balance_async(struct btrfs_fs_info *fs_info)
{
struct task_struct *tsk;
+
+ spin_lock(&fs_info->balance_lock);
+ if (!fs_info->balance_ctl) {
+ spin_unlock(&fs_info->balance_lock);
+ return 0;
+ }
+ spin_unlock(&fs_info->balance_lock);
+
+ if (btrfs_test_opt(fs_info->tree_root, SKIP_BALANCE)) {
+ printk(KERN_INFO "btrfs: force skipping balance\n");
+ return 0;
+ }
+
+ tsk = kthread_run(balance_kthread, fs_info, "btrfs-balance");
+ if (IS_ERR(tsk))
+ return PTR_ERR(tsk);
+
+ return 0;
+}
+
+int btrfs_recover_balance(struct btrfs_fs_info *fs_info)
+{
struct btrfs_balance_control *bctl;
struct btrfs_balance_item *item;
struct btrfs_disk_balance_args disk_bargs;
if (!path)
return -ENOMEM;
- bctl = kzalloc(sizeof(*bctl), GFP_NOFS);
- if (!bctl) {
- ret = -ENOMEM;
- goto out;
- }
-
key.objectid = BTRFS_BALANCE_OBJECTID;
key.type = BTRFS_BALANCE_ITEM_KEY;
key.offset = 0;
- ret = btrfs_search_slot(NULL, tree_root, &key, path, 0, 0);
+ ret = btrfs_search_slot(NULL, fs_info->tree_root, &key, path, 0, 0);
if (ret < 0)
- goto out_bctl;
+ goto out;
if (ret > 0) { /* ret = -ENOENT; */
ret = 0;
- goto out_bctl;
+ goto out;
+ }
+
+ bctl = kzalloc(sizeof(*bctl), GFP_NOFS);
+ if (!bctl) {
+ ret = -ENOMEM;
+ goto out;
}
leaf = path->nodes[0];
item = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_balance_item);
- bctl->fs_info = tree_root->fs_info;
- bctl->flags = btrfs_balance_flags(leaf, item) | BTRFS_BALANCE_RESUME;
+ bctl->fs_info = fs_info;
+ bctl->flags = btrfs_balance_flags(leaf, item);
+ bctl->flags |= BTRFS_BALANCE_RESUME;
btrfs_balance_data(leaf, item, &disk_bargs);
btrfs_disk_balance_args_to_cpu(&bctl->data, &disk_bargs);
btrfs_balance_sys(leaf, item, &disk_bargs);
btrfs_disk_balance_args_to_cpu(&bctl->sys, &disk_bargs);
- tsk = kthread_run(balance_kthread, bctl, "btrfs-balance");
- if (IS_ERR(tsk))
- ret = PTR_ERR(tsk);
- else
- goto out;
+ mutex_lock(&fs_info->volume_mutex);
+ mutex_lock(&fs_info->balance_mutex);
-out_bctl:
- kfree(bctl);
+ set_balance_control(bctl);
+
+ mutex_unlock(&fs_info->balance_mutex);
+ mutex_unlock(&fs_info->volume_mutex);
out:
btrfs_free_path(path);
return ret;
BUG_ON(stripe_index >= bbio->num_stripes);
dev = bbio->stripes[stripe_index].dev;
- if (bio->bi_rw & WRITE)
- btrfs_dev_stat_inc(dev,
- BTRFS_DEV_STAT_WRITE_ERRS);
- else
- btrfs_dev_stat_inc(dev,
- BTRFS_DEV_STAT_READ_ERRS);
- if ((bio->bi_rw & WRITE_FLUSH) == WRITE_FLUSH)
- btrfs_dev_stat_inc(dev,
- BTRFS_DEV_STAT_FLUSH_ERRS);
- btrfs_dev_stat_print_on_error(dev);
+ if (dev->bdev) {
+ if (bio->bi_rw & WRITE)
+ btrfs_dev_stat_inc(dev,
+ BTRFS_DEV_STAT_WRITE_ERRS);
+ else
+ btrfs_dev_stat_inc(dev,
+ BTRFS_DEV_STAT_READ_ERRS);
+ if ((bio->bi_rw & WRITE_FLUSH) == WRITE_FLUSH)
+ btrfs_dev_stat_inc(dev,
+ BTRFS_DEV_STAT_FLUSH_ERRS);
+ btrfs_dev_stat_print_on_error(dev);
+ }
}
}
bio->bi_sector = bbio->stripes[dev_nr].physical >> 9;
dev = bbio->stripes[dev_nr].dev;
if (dev && dev->bdev && (rw != WRITE || dev->writeable)) {
+#ifdef DEBUG
+ struct rcu_string *name;
+
+ rcu_read_lock();
+ name = rcu_dereference(dev->name);
pr_debug("btrfs_map_bio: rw %d, secor=%llu, dev=%lu "
"(%s id %llu), size=%u\n", rw,
(u64)bio->bi_sector, (u_long)dev->bdev->bd_dev,
- dev->name, dev->devid, bio->bi_size);
+ name->str, dev->devid, bio->bi_size);
+ rcu_read_unlock();
+#endif
bio->bi_bdev = dev->bdev;
if (async_submit)
schedule_bio(root, dev, rw, bio);
key.offset = device->devid;
ret = btrfs_search_slot(NULL, dev_root, &key, path, 0, 0);
if (ret) {
- printk(KERN_WARNING "btrfs: no dev_stats entry found for device %s (devid %llu) (OK on first mount after mkfs)\n",
- device->name, (unsigned long long)device->devid);
+ printk_in_rcu(KERN_WARNING "btrfs: no dev_stats entry found for device %s (devid %llu) (OK on first mount after mkfs)\n",
+ rcu_str_deref(device->name),
+ (unsigned long long)device->devid);
__btrfs_reset_dev_stats(device);
device->dev_stats_valid = 1;
btrfs_release_path(path);
BUG_ON(!path);
ret = btrfs_search_slot(trans, dev_root, &key, path, -1, 1);
if (ret < 0) {
- printk(KERN_WARNING "btrfs: error %d while searching for dev_stats item for device %s!\n",
- ret, device->name);
+ printk_in_rcu(KERN_WARNING "btrfs: error %d while searching for dev_stats item for device %s!\n",
+ ret, rcu_str_deref(device->name));
goto out;
}
/* need to delete old one and insert a new one */
ret = btrfs_del_item(trans, dev_root, path);
if (ret != 0) {
- printk(KERN_WARNING "btrfs: delete too small dev_stats item for device %s failed %d!\n",
- device->name, ret);
+ printk_in_rcu(KERN_WARNING "btrfs: delete too small dev_stats item for device %s failed %d!\n",
+ rcu_str_deref(device->name), ret);
goto out;
}
ret = 1;
ret = btrfs_insert_empty_item(trans, dev_root, path,
&key, sizeof(*ptr));
if (ret < 0) {
- printk(KERN_WARNING "btrfs: insert dev_stats item for device %s failed %d!\n",
- device->name, ret);
+ printk_in_rcu(KERN_WARNING "btrfs: insert dev_stats item for device %s failed %d!\n",
+ rcu_str_deref(device->name), ret);
goto out;
}
}
{
if (!dev->dev_stats_valid)
return;
- printk_ratelimited(KERN_ERR
+ printk_ratelimited_in_rcu(KERN_ERR
"btrfs: bdev %s errs: wr %u, rd %u, flush %u, corrupt %u, gen %u\n",
- dev->name,
+ rcu_str_deref(dev->name),
btrfs_dev_stat_read(dev, BTRFS_DEV_STAT_WRITE_ERRS),
btrfs_dev_stat_read(dev, BTRFS_DEV_STAT_READ_ERRS),
btrfs_dev_stat_read(dev, BTRFS_DEV_STAT_FLUSH_ERRS),
static void btrfs_dev_stat_print_on_load(struct btrfs_device *dev)
{
- printk(KERN_INFO "btrfs: bdev %s errs: wr %u, rd %u, flush %u, corrupt %u, gen %u\n",
- dev->name,
+ printk_in_rcu(KERN_INFO "btrfs: bdev %s errs: wr %u, rd %u, flush %u, corrupt %u, gen %u\n",
+ rcu_str_deref(dev->name),
btrfs_dev_stat_read(dev, BTRFS_DEV_STAT_WRITE_ERRS),
btrfs_dev_stat_read(dev, BTRFS_DEV_STAT_READ_ERRS),
btrfs_dev_stat_read(dev, BTRFS_DEV_STAT_FLUSH_ERRS),
/* the mode sent to blkdev_get */
fmode_t mode;
- char *name;
+ struct rcu_string *name;
/* the internal btrfs device id */
u64 devid;
int btrfs_init_new_device(struct btrfs_root *root, char *path);
int btrfs_balance(struct btrfs_balance_control *bctl,
struct btrfs_ioctl_balance_args *bargs);
-int btrfs_recover_balance(struct btrfs_root *tree_root);
+int btrfs_resume_balance_async(struct btrfs_fs_info *fs_info);
+int btrfs_recover_balance(struct btrfs_fs_info *fs_info);
int btrfs_pause_balance(struct btrfs_fs_info *fs_info);
int btrfs_cancel_balance(struct btrfs_fs_info *fs_info);
int btrfs_chunk_readonly(struct btrfs_root *root, u64 chunk_offset);
static struct buffer_head *
__getblk_slow(struct block_device *bdev, sector_t block, int size)
{
+ int ret;
+ struct buffer_head *bh;
+
/* Size must be multiple of hard sectorsize */
if (unlikely(size & (bdev_logical_block_size(bdev)-1) ||
(size < 512 || size > PAGE_SIZE))) {
return NULL;
}
- for (;;) {
- struct buffer_head * bh;
- int ret;
+retry:
+ bh = __find_get_block(bdev, block, size);
+ if (bh)
+ return bh;
+ ret = grow_buffers(bdev, block, size);
+ if (ret == 0) {
+ free_more_memory();
+ goto retry;
+ } else if (ret > 0) {
bh = __find_get_block(bdev, block, size);
if (bh)
return bh;
-
- ret = grow_buffers(bdev, block, size);
- if (ret < 0)
- return NULL;
- if (ret == 0)
- free_more_memory();
}
+ return NULL;
}
/*
(CONGESTION_ON_THRESH(congestion_kb) - \
(CONGESTION_ON_THRESH(congestion_kb) >> 2))
-
+static inline struct ceph_snap_context *page_snap_context(struct page *page)
+{
+ if (PagePrivate(page))
+ return (void *)page->private;
+ return NULL;
+}
/*
* Dirty a page. Optimistically adjust accounting, on the assumption
{
struct inode *inode;
struct ceph_inode_info *ci;
- struct ceph_snap_context *snapc = (void *)page->private;
+ struct ceph_snap_context *snapc = page_snap_context(page);
BUG_ON(!PageLocked(page));
- BUG_ON(!page->private);
BUG_ON(!PagePrivate(page));
BUG_ON(!page->mapping);
struct inode *inode = page->mapping ? page->mapping->host : NULL;
dout("%p releasepage %p idx %lu\n", inode, page, page->index);
WARN_ON(PageDirty(page));
- WARN_ON(page->private);
WARN_ON(PagePrivate(page));
return 0;
}
osdc = &fsc->client->osdc;
/* verify this is a writeable snap context */
- snapc = (void *)page->private;
+ snapc = page_snap_context(page);
if (snapc == NULL) {
dout("writepage %p page %p not dirty?\n", inode, page);
goto out;
oldest = get_oldest_context(inode, &snap_size);
if (snapc->seq > oldest->seq) {
dout("writepage %p page %p snapc %p not writeable - noop\n",
- inode, page, (void *)page->private);
+ inode, page, snapc);
/* we should only noop if called by kswapd */
WARN_ON((current->flags & PF_MEMALLOC) == 0);
ceph_put_snap_context(oldest);
clear_bdi_congested(&fsc->backing_dev_info,
BLK_RW_ASYNC);
- ceph_put_snap_context((void *)page->private);
+ ceph_put_snap_context(page_snap_context(page));
page->private = 0;
ClearPagePrivate(page);
dout("unlocking %d %p\n", i, page);
}
/* only if matching snap context */
- pgsnapc = (void *)page->private;
+ pgsnapc = page_snap_context(page);
if (pgsnapc->seq > snapc->seq) {
dout("page snapc %p %lld > oldest %p %lld\n",
pgsnapc, pgsnapc->seq, snapc, snapc->seq);
BUG_ON(!ci->i_snap_realm);
down_read(&mdsc->snap_rwsem);
BUG_ON(!ci->i_snap_realm->cached_context);
- snapc = (void *)page->private;
+ snapc = page_snap_context(page);
if (snapc && snapc != ci->i_head_snapc) {
/*
* this page is already dirty in another (older) snap
void (*add_credits)(struct TCP_Server_Info *, const unsigned int);
void (*set_credits)(struct TCP_Server_Info *, const int);
int * (*get_credits_field)(struct TCP_Server_Info *);
+ __u64 (*get_next_mid)(struct TCP_Server_Info *);
/* data offset from read response message */
unsigned int (*read_data_offset)(char *);
/* data length from read response message */
server->ops->set_credits(server, val);
}
+static inline __u64
+get_next_mid(struct TCP_Server_Info *server)
+{
+ return server->ops->get_next_mid(server);
+}
+
/*
* Macros to allow the TCP_Server_Info->net field and related code to drop out
* when CONFIG_NET_NS isn't set.
void **request_buf);
extern int CIFS_SessSetup(unsigned int xid, struct cifs_ses *ses,
const struct nls_table *nls_cp);
-extern __u64 GetNextMid(struct TCP_Server_Info *server);
extern struct timespec cifs_NTtimeToUnix(__le64 utc_nanoseconds_since_1601);
extern u64 cifs_UnixTimeToNT(struct timespec);
extern struct timespec cnvrtDosUnixTm(__le16 le_date, __le16 le_time,
#endif /* CONFIG_CIFS_WEAK_PW_HASH */
#endif /* CIFS_POSIX */
-/* Forward declarations */
+#ifdef CONFIG_HIGHMEM
+/*
+ * On arches that have high memory, kmap address space is limited. By
+ * serializing the kmap operations on those arches, we ensure that we don't
+ * end up with a bunch of threads in writeback with partially mapped page
+ * arrays, stuck waiting for kmap to come back. That situation prevents
+ * progress and can deadlock.
+ */
+static DEFINE_MUTEX(cifs_kmap_mutex);
+
+static inline void
+cifs_kmap_lock(void)
+{
+ mutex_lock(&cifs_kmap_mutex);
+}
+
+static inline void
+cifs_kmap_unlock(void)
+{
+ mutex_unlock(&cifs_kmap_mutex);
+}
+#else /* !CONFIG_HIGHMEM */
+#define cifs_kmap_lock() do { ; } while(0)
+#define cifs_kmap_unlock() do { ; } while(0)
+#endif /* CONFIG_HIGHMEM */
/* Mark as invalid, all open files on tree connections since they
were closed when session to server was lost */
return rc;
buffer = (struct smb_hdr *)*request_buf;
- buffer->Mid = GetNextMid(ses->server);
+ buffer->Mid = get_next_mid(ses->server);
if (ses->capabilities & CAP_UNICODE)
buffer->Flags2 |= SMBFLG2_UNICODE;
if (ses->capabilities & CAP_STATUS32)
cFYI(1, "secFlags 0x%x", secFlags);
- pSMB->hdr.Mid = GetNextMid(server);
+ pSMB->hdr.Mid = get_next_mid(server);
pSMB->hdr.Flags2 |= (SMBFLG2_UNICODE | SMBFLG2_ERR_STATUS);
if ((secFlags & CIFSSEC_MUST_KRB5) == CIFSSEC_MUST_KRB5)
return rc;
}
- pSMB->hdr.Mid = GetNextMid(ses->server);
+ pSMB->hdr.Mid = get_next_mid(ses->server);
if (ses->server->sec_mode &
(SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
}
/* marshal up the page array */
+ cifs_kmap_lock();
len = rdata->marshal_iov(rdata, data_len);
+ cifs_kmap_unlock();
data_len -= len;
/* issue the read if we have any iovecs left to fill */
* and set the iov_len properly for each one. It may also set
* wdata->bytes too.
*/
+ cifs_kmap_lock();
wdata->marshal_iov(iov, wdata);
+ cifs_kmap_unlock();
cFYI(1, "async write at %llu %u bytes", wdata->offset, wdata->bytes);
/* server pointer checked in called function,
but should never be null here anyway */
- pSMB->hdr.Mid = GetNextMid(ses->server);
+ pSMB->hdr.Mid = get_next_mid(ses->server);
pSMB->hdr.Tid = ses->ipc_tid;
pSMB->hdr.Uid = ses->Suid;
if (ses->capabilities & CAP_STATUS32)
if (mid_entry != NULL) {
if (!mid_entry->multiRsp || mid_entry->multiEnd)
mid_entry->callback(mid_entry);
- } else if (!server->ops->is_oplock_break(buf, server)) {
+ } else if (!server->ops->is_oplock_break ||
+ !server->ops->is_oplock_break(buf, server)) {
cERROR(1, "No task to wake, unknown frame received! "
"NumMids %d", atomic_read(&midCount));
cifs_dump_mem("Received Data is: ", buf,
HEADER_SIZE(server));
#ifdef CONFIG_CIFS_DEBUG2
- server->ops->dump_detail(buf);
+ if (server->ops->dump_detail)
+ server->ops->dump_detail(buf);
cifs_dump_mids(server);
#endif /* CIFS_DEBUG2 */
* If yes, we have encountered a double deliminator
* reset the NULL character to the deliminator
*/
- if (tmp_end < end && tmp_end[1] == delim)
+ if (tmp_end < end && tmp_end[1] == delim) {
tmp_end[0] = delim;
- /* Keep iterating until we get to a single deliminator
- * OR the end
- */
- while ((tmp_end = strchr(tmp_end, delim)) != NULL &&
- (tmp_end[1] == delim)) {
- tmp_end = (char *) &tmp_end[2];
- }
+ /* Keep iterating until we get to a single
+ * deliminator OR the end
+ */
+ while ((tmp_end = strchr(tmp_end, delim))
+ != NULL && (tmp_end[1] == delim)) {
+ tmp_end = (char *) &tmp_end[2];
+ }
- /* Reset var options to point to next element */
- if (tmp_end) {
- tmp_end[0] = '\0';
- options = (char *) &tmp_end[1];
- } else
- /* Reached the end of the mount option string */
- options = end;
+ /* Reset var options to point to next element */
+ if (tmp_end) {
+ tmp_end[0] = '\0';
+ options = (char *) &tmp_end[1];
+ } else
+ /* Reached the end of the mount option
+ * string */
+ options = end;
+ }
/* Now build new password string */
temp_len = strlen(value);
#define CIFS_DEFAULT_NON_POSIX_RSIZE (60 * 1024)
#define CIFS_DEFAULT_NON_POSIX_WSIZE (65536)
+/*
+ * On hosts with high memory, we can't currently support wsize/rsize that are
+ * larger than we can kmap at once. Cap the rsize/wsize at
+ * LAST_PKMAP * PAGE_SIZE. We'll never be able to fill a read or write request
+ * larger than that anyway.
+ */
+#ifdef CONFIG_HIGHMEM
+#define CIFS_KMAP_SIZE_LIMIT (LAST_PKMAP * PAGE_CACHE_SIZE)
+#else /* CONFIG_HIGHMEM */
+#define CIFS_KMAP_SIZE_LIMIT (1<<24)
+#endif /* CONFIG_HIGHMEM */
+
static unsigned int
cifs_negotiate_wsize(struct cifs_tcon *tcon, struct smb_vol *pvolume_info)
{
wsize = min_t(unsigned int, wsize,
server->maxBuf - sizeof(WRITE_REQ) + 4);
+ /* limit to the amount that we can kmap at once */
+ wsize = min_t(unsigned int, wsize, CIFS_KMAP_SIZE_LIMIT);
+
/* hard limit of CIFS_MAX_WSIZE */
wsize = min_t(unsigned int, wsize, CIFS_MAX_WSIZE);
* MS-CIFS indicates that servers are only limited by the client's
* bufsize for reads, testing against win98se shows that it throws
* INVALID_PARAMETER errors if you try to request too large a read.
+ * OS/2 just sends back short reads.
*
- * If the server advertises a MaxBufferSize of less than one page,
- * assume that it also can't satisfy reads larger than that either.
- *
- * FIXME: Is there a better heuristic for this?
+ * If the server doesn't advertise CAP_LARGE_READ_X, then assume that
+ * it can't handle a read request larger than its MaxBufferSize either.
*/
if (tcon->unix_ext && (unix_cap & CIFS_UNIX_LARGE_READ_CAP))
defsize = CIFS_DEFAULT_IOSIZE;
else if (server->capabilities & CAP_LARGE_READ_X)
defsize = CIFS_DEFAULT_NON_POSIX_RSIZE;
- else if (server->maxBuf >= PAGE_CACHE_SIZE)
- defsize = CIFSMaxBufSize;
else
defsize = server->maxBuf - sizeof(READ_RSP);
if (!(server->capabilities & CAP_LARGE_READ_X))
rsize = min_t(unsigned int, CIFSMaxBufSize, rsize);
+ /* limit to the amount that we can kmap at once */
+ rsize = min_t(unsigned int, rsize, CIFS_KMAP_SIZE_LIMIT);
+
/* hard limit of CIFS_MAX_RSIZE */
rsize = min_t(unsigned int, rsize, CIFS_MAX_RSIZE);
header_assemble(smb_buffer, SMB_COM_TREE_CONNECT_ANDX,
NULL /*no tid */ , 4 /*wct */ );
- smb_buffer->Mid = GetNextMid(ses->server);
+ smb_buffer->Mid = get_next_mid(ses->server);
smb_buffer->Uid = ses->Suid;
pSMB = (TCONX_REQ *) smb_buffer;
pSMBr = (TCONX_RSP *) smb_buffer_response;
struct cifsLockInfo *li, *tmp;
struct cifs_tcon *tcon;
struct cifsInodeInfo *cinode = CIFS_I(cfile->dentry->d_inode);
- unsigned int num, max_num;
+ unsigned int num, max_num, max_buf;
LOCKING_ANDX_RANGE *buf, *cur;
int types[] = {LOCKING_ANDX_LARGE_FILES,
LOCKING_ANDX_SHARED_LOCK | LOCKING_ANDX_LARGE_FILES};
return rc;
}
- max_num = (tcon->ses->server->maxBuf - sizeof(struct smb_hdr)) /
- sizeof(LOCKING_ANDX_RANGE);
+ /*
+ * Accessing maxBuf is racy with cifs_reconnect - need to store value
+ * and check it for zero before using.
+ */
+ max_buf = tcon->ses->server->maxBuf;
+ if (!max_buf) {
+ mutex_unlock(&cinode->lock_mutex);
+ FreeXid(xid);
+ return -EINVAL;
+ }
+
+ max_num = (max_buf - sizeof(struct smb_hdr)) /
+ sizeof(LOCKING_ANDX_RANGE);
buf = kzalloc(max_num * sizeof(LOCKING_ANDX_RANGE), GFP_KERNEL);
if (!buf) {
mutex_unlock(&cinode->lock_mutex);
int types[] = {LOCKING_ANDX_LARGE_FILES,
LOCKING_ANDX_SHARED_LOCK | LOCKING_ANDX_LARGE_FILES};
unsigned int i;
- unsigned int max_num, num;
+ unsigned int max_num, num, max_buf;
LOCKING_ANDX_RANGE *buf, *cur;
struct cifs_tcon *tcon = tlink_tcon(cfile->tlink);
struct cifsInodeInfo *cinode = CIFS_I(cfile->dentry->d_inode);
INIT_LIST_HEAD(&tmp_llist);
- max_num = (tcon->ses->server->maxBuf - sizeof(struct smb_hdr)) /
- sizeof(LOCKING_ANDX_RANGE);
+ /*
+ * Accessing maxBuf is racy with cifs_reconnect - need to store value
+ * and check it for zero before using.
+ */
+ max_buf = tcon->ses->server->maxBuf;
+ if (!max_buf)
+ return -EINVAL;
+
+ max_num = (max_buf - sizeof(struct smb_hdr)) /
+ sizeof(LOCKING_ANDX_RANGE);
buf = kzalloc(max_num * sizeof(LOCKING_ANDX_RANGE), GFP_KERNEL);
if (!buf)
return -ENOMEM;
continue;
if (types[i] != li->type)
continue;
- if (!cinode->can_cache_brlcks) {
- cur->Pid = cpu_to_le16(li->pid);
- cur->LengthLow = cpu_to_le32((u32)li->length);
- cur->LengthHigh =
- cpu_to_le32((u32)(li->length>>32));
- cur->OffsetLow = cpu_to_le32((u32)li->offset);
- cur->OffsetHigh =
- cpu_to_le32((u32)(li->offset>>32));
- /*
- * We need to save a lock here to let us add
- * it again to the file's list if the unlock
- * range request fails on the server.
- */
- list_move(&li->llist, &tmp_llist);
- if (++num == max_num) {
- stored_rc = cifs_lockv(xid, tcon,
- cfile->netfid,
- li->type, num,
- 0, buf);
- if (stored_rc) {
- /*
- * We failed on the unlock range
- * request - add all locks from
- * the tmp list to the head of
- * the file's list.
- */
- cifs_move_llist(&tmp_llist,
- &cfile->llist);
- rc = stored_rc;
- } else
- /*
- * The unlock range request
- * succeed - free the tmp list.
- */
- cifs_free_llist(&tmp_llist);
- cur = buf;
- num = 0;
- } else
- cur++;
- } else {
+ if (cinode->can_cache_brlcks) {
/*
* We can cache brlock requests - simply remove
* a lock from the file's list.
list_del(&li->llist);
cifs_del_lock_waiters(li);
kfree(li);
+ continue;
}
+ cur->Pid = cpu_to_le16(li->pid);
+ cur->LengthLow = cpu_to_le32((u32)li->length);
+ cur->LengthHigh = cpu_to_le32((u32)(li->length>>32));
+ cur->OffsetLow = cpu_to_le32((u32)li->offset);
+ cur->OffsetHigh = cpu_to_le32((u32)(li->offset>>32));
+ /*
+ * We need to save a lock here to let us add it again to
+ * the file's list if the unlock range request fails on
+ * the server.
+ */
+ list_move(&li->llist, &tmp_llist);
+ if (++num == max_num) {
+ stored_rc = cifs_lockv(xid, tcon, cfile->netfid,
+ li->type, num, 0, buf);
+ if (stored_rc) {
+ /*
+ * We failed on the unlock range
+ * request - add all locks from the tmp
+ * list to the head of the file's list.
+ */
+ cifs_move_llist(&tmp_llist,
+ &cfile->llist);
+ rc = stored_rc;
+ } else
+ /*
+ * The unlock range request succeed -
+ * free the tmp list.
+ */
+ cifs_free_llist(&tmp_llist);
+ cur = buf;
+ num = 0;
+ } else
+ cur++;
}
if (num) {
stored_rc = cifs_lockv(xid, tcon, cfile->netfid,
return;
}
-/*
- * Find a free multiplex id (SMB mid). Otherwise there could be
- * mid collisions which might cause problems, demultiplexing the
- * wrong response to this request. Multiplex ids could collide if
- * one of a series requests takes much longer than the others, or
- * if a very large number of long lived requests (byte range
- * locks or FindNotify requests) are pending. No more than
- * 64K-1 requests can be outstanding at one time. If no
- * mids are available, return zero. A future optimization
- * could make the combination of mids and uid the key we use
- * to demultiplex on (rather than mid alone).
- * In addition to the above check, the cifs demultiplex
- * code already used the command code as a secondary
- * check of the frame and if signing is negotiated the
- * response would be discarded if the mid were the same
- * but the signature was wrong. Since the mid is not put in the
- * pending queue until later (when it is about to be dispatched)
- * we do have to limit the number of outstanding requests
- * to somewhat less than 64K-1 although it is hard to imagine
- * so many threads being in the vfs at one time.
- */
-__u64 GetNextMid(struct TCP_Server_Info *server)
-{
- __u64 mid = 0;
- __u16 last_mid, cur_mid;
- bool collision;
-
- spin_lock(&GlobalMid_Lock);
-
- /* mid is 16 bit only for CIFS/SMB */
- cur_mid = (__u16)((server->CurrentMid) & 0xffff);
- /* we do not want to loop forever */
- last_mid = cur_mid;
- cur_mid++;
-
- /*
- * This nested loop looks more expensive than it is.
- * In practice the list of pending requests is short,
- * fewer than 50, and the mids are likely to be unique
- * on the first pass through the loop unless some request
- * takes longer than the 64 thousand requests before it
- * (and it would also have to have been a request that
- * did not time out).
- */
- while (cur_mid != last_mid) {
- struct mid_q_entry *mid_entry;
- unsigned int num_mids;
-
- collision = false;
- if (cur_mid == 0)
- cur_mid++;
-
- num_mids = 0;
- list_for_each_entry(mid_entry, &server->pending_mid_q, qhead) {
- ++num_mids;
- if (mid_entry->mid == cur_mid &&
- mid_entry->mid_state == MID_REQUEST_SUBMITTED) {
- /* This mid is in use, try a different one */
- collision = true;
- break;
- }
- }
-
- /*
- * if we have more than 32k mids in the list, then something
- * is very wrong. Possibly a local user is trying to DoS the
- * box by issuing long-running calls and SIGKILL'ing them. If
- * we get to 2^16 mids then we're in big trouble as this
- * function could loop forever.
- *
- * Go ahead and assign out the mid in this situation, but force
- * an eventual reconnect to clean out the pending_mid_q.
- */
- if (num_mids > 32768)
- server->tcpStatus = CifsNeedReconnect;
-
- if (!collision) {
- mid = (__u64)cur_mid;
- server->CurrentMid = mid;
- break;
- }
- cur_mid++;
- }
- spin_unlock(&GlobalMid_Lock);
- return mid;
-}
-
/* NB: MID can not be set if treeCon not passed in, in that
case it is responsbility of caller to set the mid */
void
/* Uid is not converted */
buffer->Uid = treeCon->ses->Suid;
- buffer->Mid = GetNextMid(treeCon->ses->server);
+ buffer->Mid = get_next_mid(treeCon->ses->server);
}
if (treeCon->Flags & SMB_SHARE_IS_IN_DFS)
buffer->Flags2 |= SMBFLG2_DFS;
dentry = d_lookup(parent, name);
if (dentry) {
- /* FIXME: check for inode number changes? */
- if (dentry->d_inode != NULL)
+ inode = dentry->d_inode;
+ /* update inode in place if i_ino didn't change */
+ if (inode && CIFS_I(inode)->uniqueid == fattr->cf_uniqueid) {
+ cifs_fattr_to_inode(inode, fattr);
return dentry;
+ }
d_drop(dentry);
dput(dentry);
}
return &server->credits;
}
+/*
+ * Find a free multiplex id (SMB mid). Otherwise there could be
+ * mid collisions which might cause problems, demultiplexing the
+ * wrong response to this request. Multiplex ids could collide if
+ * one of a series requests takes much longer than the others, or
+ * if a very large number of long lived requests (byte range
+ * locks or FindNotify requests) are pending. No more than
+ * 64K-1 requests can be outstanding at one time. If no
+ * mids are available, return zero. A future optimization
+ * could make the combination of mids and uid the key we use
+ * to demultiplex on (rather than mid alone).
+ * In addition to the above check, the cifs demultiplex
+ * code already used the command code as a secondary
+ * check of the frame and if signing is negotiated the
+ * response would be discarded if the mid were the same
+ * but the signature was wrong. Since the mid is not put in the
+ * pending queue until later (when it is about to be dispatched)
+ * we do have to limit the number of outstanding requests
+ * to somewhat less than 64K-1 although it is hard to imagine
+ * so many threads being in the vfs at one time.
+ */
+static __u64
+cifs_get_next_mid(struct TCP_Server_Info *server)
+{
+ __u64 mid = 0;
+ __u16 last_mid, cur_mid;
+ bool collision;
+
+ spin_lock(&GlobalMid_Lock);
+
+ /* mid is 16 bit only for CIFS/SMB */
+ cur_mid = (__u16)((server->CurrentMid) & 0xffff);
+ /* we do not want to loop forever */
+ last_mid = cur_mid;
+ cur_mid++;
+
+ /*
+ * This nested loop looks more expensive than it is.
+ * In practice the list of pending requests is short,
+ * fewer than 50, and the mids are likely to be unique
+ * on the first pass through the loop unless some request
+ * takes longer than the 64 thousand requests before it
+ * (and it would also have to have been a request that
+ * did not time out).
+ */
+ while (cur_mid != last_mid) {
+ struct mid_q_entry *mid_entry;
+ unsigned int num_mids;
+
+ collision = false;
+ if (cur_mid == 0)
+ cur_mid++;
+
+ num_mids = 0;
+ list_for_each_entry(mid_entry, &server->pending_mid_q, qhead) {
+ ++num_mids;
+ if (mid_entry->mid == cur_mid &&
+ mid_entry->mid_state == MID_REQUEST_SUBMITTED) {
+ /* This mid is in use, try a different one */
+ collision = true;
+ break;
+ }
+ }
+
+ /*
+ * if we have more than 32k mids in the list, then something
+ * is very wrong. Possibly a local user is trying to DoS the
+ * box by issuing long-running calls and SIGKILL'ing them. If
+ * we get to 2^16 mids then we're in big trouble as this
+ * function could loop forever.
+ *
+ * Go ahead and assign out the mid in this situation, but force
+ * an eventual reconnect to clean out the pending_mid_q.
+ */
+ if (num_mids > 32768)
+ server->tcpStatus = CifsNeedReconnect;
+
+ if (!collision) {
+ mid = (__u64)cur_mid;
+ server->CurrentMid = mid;
+ break;
+ }
+ cur_mid++;
+ }
+ spin_unlock(&GlobalMid_Lock);
+ return mid;
+}
+
struct smb_version_operations smb1_operations = {
.send_cancel = send_nt_cancel,
.compare_fids = cifs_compare_fids,
.add_credits = cifs_add_credits,
.set_credits = cifs_set_credits,
.get_credits_field = cifs_get_credits_field,
+ .get_next_mid = cifs_get_next_mid,
.read_data_offset = cifs_read_data_offset,
.read_data_length = cifs_read_data_length,
.map_error = map_smb_to_linux_error,
if (mid == NULL)
return -ENOMEM;
- /* put it on the pending_mid_q */
- spin_lock(&GlobalMid_Lock);
- list_add_tail(&mid->qhead, &server->pending_mid_q);
- spin_unlock(&GlobalMid_Lock);
-
rc = cifs_sign_smb2(iov, nvec, server, &mid->sequence_number);
- if (rc)
- delete_mid(mid);
+ if (rc) {
+ DeleteMidQEntry(mid);
+ return rc;
+ }
+
*ret_mid = mid;
- return rc;
+ return 0;
}
/*
mid->callback_data = cbdata;
mid->mid_state = MID_REQUEST_SUBMITTED;
+ /* put it on the pending_mid_q */
+ spin_lock(&GlobalMid_Lock);
+ list_add_tail(&mid->qhead, &server->pending_mid_q);
+ spin_unlock(&GlobalMid_Lock);
+
+
cifs_in_send_inc(server);
rc = smb_sendv(server, iov, nvec);
cifs_in_send_dec(server);
cifs_save_when_sent(mid);
mutex_unlock(&server->srv_mutex);
- if (rc)
- goto out_err;
+ if (rc == 0)
+ return 0;
- return rc;
-out_err:
delete_mid(mid);
add_credits(server, 1);
wake_up(&server->request_q);
pSMB->LockType = LOCKING_ANDX_CANCEL_LOCK|LOCKING_ANDX_LARGE_FILES;
pSMB->Timeout = 0;
- pSMB->hdr.Mid = GetNextMid(ses->server);
+ pSMB->hdr.Mid = get_next_mid(ses->server);
return SendReceive(xid, ses, in_buf, out_buf,
&bytes_returned, 0);
/**
* d_find_alias - grab a hashed alias of inode
* @inode: inode in question
+ * @want_discon: flag, used by d_splice_alias, to request
+ * that only a DISCONNECTED alias be returned.
*
* If inode has a hashed alias, or is a directory and has any alias,
* acquire the reference to alias and return it. Otherwise return NULL.
* of a filesystem.
*
* If the inode has an IS_ROOT, DCACHE_DISCONNECTED alias, then prefer
- * any other hashed alias over that.
+ * any other hashed alias over that one unless @want_discon is set,
+ * in which case only return an IS_ROOT, DCACHE_DISCONNECTED alias.
*/
-static struct dentry *__d_find_alias(struct inode *inode)
+static struct dentry *__d_find_alias(struct inode *inode, int want_discon)
{
struct dentry *alias, *discon_alias;
if (IS_ROOT(alias) &&
(alias->d_flags & DCACHE_DISCONNECTED)) {
discon_alias = alias;
- } else {
+ } else if (!want_discon) {
__dget_dlock(alias);
spin_unlock(&alias->d_lock);
return alias;
if (!list_empty(&inode->i_dentry)) {
spin_lock(&inode->i_lock);
- de = __d_find_alias(inode);
+ de = __d_find_alias(inode, 0);
spin_unlock(&inode->i_lock);
}
return de;
if (inode && S_ISDIR(inode->i_mode)) {
spin_lock(&inode->i_lock);
- new = __d_find_any_alias(inode);
+ new = __d_find_alias(inode, 1);
if (new) {
+ BUG_ON(!(new->d_flags & DCACHE_DISCONNECTED));
spin_unlock(&inode->i_lock);
security_d_instantiate(new, inode);
d_move(new, dentry);
struct dentry *alias;
/* Does an aliased dentry already exist? */
- alias = __d_find_alias(inode);
+ alias = __d_find_alias(inode, 0);
if (alias) {
actual = alias;
write_seqlock(&rename_lock);
(*lower_file) = dentry_open(lower_dentry, lower_mnt, flags, cred);
if (!IS_ERR(*lower_file))
goto out;
- if (flags & O_RDONLY) {
+ if ((flags & O_ACCMODE) == O_RDONLY) {
rc = PTR_ERR((*lower_file));
goto out;
}
mutex_lock(&ecryptfs_daemon_hash_mux);
/* TODO: Just use file->private_data? */
rc = ecryptfs_find_daemon_by_euid(&daemon, euid, current_user_ns());
- BUG_ON(rc || !daemon);
+ if (rc || !daemon) {
+ mutex_unlock(&ecryptfs_daemon_hash_mux);
+ return -EINVAL;
+ }
mutex_lock(&daemon->mux);
mutex_unlock(&ecryptfs_daemon_hash_mux);
if (daemon->flags & ECRYPTFS_DAEMON_ZOMBIE) {
goto out_unlock_daemon;
}
daemon->flags |= ECRYPTFS_DAEMON_MISCDEV_OPEN;
+ file->private_data = daemon;
atomic_inc(&ecryptfs_num_miscdev_opens);
out_unlock_daemon:
mutex_unlock(&daemon->mux);
mutex_lock(&ecryptfs_daemon_hash_mux);
rc = ecryptfs_find_daemon_by_euid(&daemon, euid, current_user_ns());
- BUG_ON(rc || !daemon);
+ if (rc || !daemon)
+ daemon = file->private_data;
mutex_lock(&daemon->mux);
- BUG_ON(daemon->pid != task_pid(current));
BUG_ON(!(daemon->flags & ECRYPTFS_DAEMON_MISCDEV_OPEN));
daemon->flags &= ~ECRYPTFS_DAEMON_MISCDEV_OPEN;
atomic_dec(&ecryptfs_num_miscdev_opens);
struct ecryptfs_msg_ctx *msg_ctx, u8 msg_type,
u16 msg_flags, struct ecryptfs_daemon *daemon)
{
- int rc = 0;
+ struct ecryptfs_message *msg;
- mutex_lock(&msg_ctx->mux);
- msg_ctx->msg = kmalloc((sizeof(*msg_ctx->msg) + data_size),
- GFP_KERNEL);
- if (!msg_ctx->msg) {
- rc = -ENOMEM;
+ msg = kmalloc((sizeof(*msg) + data_size), GFP_KERNEL);
+ if (!msg) {
printk(KERN_ERR "%s: Out of memory whilst attempting "
"to kmalloc(%zd, GFP_KERNEL)\n", __func__,
- (sizeof(*msg_ctx->msg) + data_size));
- goto out_unlock;
+ (sizeof(*msg) + data_size));
+ return -ENOMEM;
}
+
+ mutex_lock(&msg_ctx->mux);
+ msg_ctx->msg = msg;
msg_ctx->msg->index = msg_ctx->index;
msg_ctx->msg->data_len = data_size;
msg_ctx->type = msg_type;
memcpy(msg_ctx->msg->data, data, data_size);
msg_ctx->msg_size = (sizeof(*msg_ctx->msg) + data_size);
- mutex_lock(&daemon->mux);
list_add_tail(&msg_ctx->daemon_out_list, &daemon->msg_ctx_out_queue);
+ mutex_unlock(&msg_ctx->mux);
+
+ mutex_lock(&daemon->mux);
daemon->num_queued_msg_ctx++;
wake_up_interruptible(&daemon->wait);
mutex_unlock(&daemon->mux);
-out_unlock:
- mutex_unlock(&msg_ctx->mux);
- return rc;
+
+ return 0;
}
/*
mutex_lock(&ecryptfs_daemon_hash_mux);
/* TODO: Just use file->private_data? */
rc = ecryptfs_find_daemon_by_euid(&daemon, euid, current_user_ns());
- BUG_ON(rc || !daemon);
+ if (rc || !daemon) {
+ mutex_unlock(&ecryptfs_daemon_hash_mux);
+ return -EINVAL;
+ }
mutex_lock(&daemon->mux);
+ if (task_pid(current) != daemon->pid) {
+ mutex_unlock(&daemon->mux);
+ mutex_unlock(&ecryptfs_daemon_hash_mux);
+ return -EPERM;
+ }
if (daemon->flags & ECRYPTFS_DAEMON_ZOMBIE) {
rc = 0;
mutex_unlock(&ecryptfs_daemon_hash_mux);
* message from the queue; try again */
goto check_list;
}
- BUG_ON(euid != daemon->euid);
- BUG_ON(current_user_ns() != daemon->user_ns);
- BUG_ON(task_pid(current) != daemon->pid);
msg_ctx = list_first_entry(&daemon->msg_ctx_out_queue,
struct ecryptfs_msg_ctx, daemon_out_list);
BUG_ON(!msg_ctx);
goto error_tgt_fput;
/* Check if EPOLLWAKEUP is allowed */
- if ((epds.events & EPOLLWAKEUP) && !capable(CAP_EPOLLWAKEUP))
+ if ((epds.events & EPOLLWAKEUP) && !capable(CAP_BLOCK_SUSPEND))
epds.events &= ~EPOLLWAKEUP;
/*
/* Notify parent that we're no longer interested in the old VM */
tsk = current;
old_mm = current->mm;
- sync_mm_rss(old_mm);
mm_release(tsk, old_mm);
if (old_mm) {
+ sync_mm_rss(old_mm);
/*
* Make sure that if there is a core dump in progress
* for the old mm, we get out and die instead of going
out:
ios->numdevs = devs_in_group;
ios->pages_consumed = cur_pg;
- if (unlikely(ret)) {
- if (length == ios->length)
- return ret;
- else
- ios->length -= length;
- }
- return 0;
+ return ret;
}
int ore_create(struct ore_io_state *ios)
{
unsigned data_devs = sp2d->data_devs;
unsigned group_width = data_devs + sp2d->parity;
- unsigned p;
+ int p, c;
if (!sp2d->needed)
return;
- for (p = 0; p < sp2d->pages_in_unit; p++) {
- struct __1_page_stripe *_1ps = &sp2d->_1p_stripes[p];
-
- if (_1ps->write_count < group_width) {
- unsigned c;
+ for (c = data_devs - 1; c >= 0; --c)
+ for (p = sp2d->pages_in_unit - 1; p >= 0; --p) {
+ struct __1_page_stripe *_1ps = &sp2d->_1p_stripes[p];
- for (c = 0; c < data_devs; c++)
- if (_1ps->page_is_read[c]) {
- struct page *page = _1ps->pages[c];
+ if (_1ps->page_is_read[c]) {
+ struct page *page = _1ps->pages[c];
- r4w->put_page(priv, page);
- _1ps->page_is_read[c] = false;
- }
+ r4w->put_page(priv, page);
+ _1ps->page_is_read[c] = false;
+ }
}
+ for (p = 0; p < sp2d->pages_in_unit; p++) {
+ struct __1_page_stripe *_1ps = &sp2d->_1p_stripes[p];
+
memset(_1ps->pages, 0, group_width * sizeof(*_1ps->pages));
_1ps->write_count = 0;
_1ps->tx = NULL;
* ios->sp2d[p][*], xor is calculated the same way. These pages are
* allocated/freed and don't go through cache
*/
-static int _read_4_write(struct ore_io_state *ios)
+static int _read_4_write_first_stripe(struct ore_io_state *ios)
{
- struct ore_io_state *ios_read;
struct ore_striping_info read_si;
struct __stripe_pages_2d *sp2d = ios->sp2d;
u64 offset = ios->si.first_stripe_start;
- u64 last_stripe_end;
- unsigned bytes_in_stripe = ios->si.bytes_in_stripe;
- unsigned i, c, p, min_p = sp2d->pages_in_unit, max_p = -1;
- int ret;
+ unsigned c, p, min_p = sp2d->pages_in_unit, max_p = -1;
if (offset == ios->offset) /* Go to start collect $200 */
goto read_last_stripe;
min_p = _sp2d_min_pg(sp2d);
max_p = _sp2d_max_pg(sp2d);
+ ORE_DBGMSG("stripe_start=0x%llx ios->offset=0x%llx min_p=%d max_p=%d\n",
+ offset, ios->offset, min_p, max_p);
+
for (c = 0; ; c++) {
ore_calc_stripe_info(ios->layout, offset, 0, &read_si);
read_si.obj_offset += min_p * PAGE_SIZE;
}
read_last_stripe:
+ return 0;
+}
+
+static int _read_4_write_last_stripe(struct ore_io_state *ios)
+{
+ struct ore_striping_info read_si;
+ struct __stripe_pages_2d *sp2d = ios->sp2d;
+ u64 offset;
+ u64 last_stripe_end;
+ unsigned bytes_in_stripe = ios->si.bytes_in_stripe;
+ unsigned c, p, min_p = sp2d->pages_in_unit, max_p = -1;
+
offset = ios->offset + ios->length;
if (offset % PAGE_SIZE)
_add_to_r4w_last_page(ios, &offset);
c = _dev_order(ios->layout->group_width * ios->layout->mirrors_p1,
ios->layout->mirrors_p1, read_si.par_dev, read_si.dev);
- BUG_ON(ios->si.first_stripe_start + bytes_in_stripe != last_stripe_end);
- /* unaligned IO must be within a single stripe */
-
if (min_p == sp2d->pages_in_unit) {
/* Didn't do it yet */
min_p = _sp2d_min_pg(sp2d);
max_p = _sp2d_max_pg(sp2d);
}
+ ORE_DBGMSG("offset=0x%llx stripe_end=0x%llx min_p=%d max_p=%d\n",
+ offset, last_stripe_end, min_p, max_p);
+
while (offset < last_stripe_end) {
struct __1_page_stripe *_1ps = &sp2d->_1p_stripes[p];
}
read_it:
+ return 0;
+}
+
+static int _read_4_write_execute(struct ore_io_state *ios)
+{
+ struct ore_io_state *ios_read;
+ unsigned i;
+ int ret;
+
ios_read = ios->ios_read_4_write;
if (!ios_read)
return 0;
}
_mark_read4write_pages_uptodate(ios_read, ret);
+ ore_put_io_state(ios_read);
+ ios->ios_read_4_write = NULL; /* Might need a reuse at last stripe */
return 0;
}
/* If first stripe, Read in all read4write pages
* (if needed) before we calculate the first parity.
*/
- _read_4_write(ios);
+ _read_4_write_first_stripe(ios);
}
+ if (!cur_len) /* If last stripe r4w pages of last stripe */
+ _read_4_write_last_stripe(ios);
+ _read_4_write_execute(ios);
for (i = 0; i < num_pages; i++) {
pages[i] = _raid_page_alloc();
int _ore_post_alloc_raid_stuff(struct ore_io_state *ios)
{
- struct ore_layout *layout = ios->layout;
-
if (ios->parity_pages) {
+ struct ore_layout *layout = ios->layout;
unsigned pages_in_unit = layout->stripe_unit / PAGE_SIZE;
- unsigned stripe_size = ios->si.bytes_in_stripe;
- u64 last_stripe, first_stripe;
if (_sp2d_alloc(pages_in_unit, layout->group_width,
layout->parity, &ios->sp2d)) {
return -ENOMEM;
}
-
- /* Round io down to last full strip */
- first_stripe = div_u64(ios->offset, stripe_size);
- last_stripe = div_u64(ios->offset + ios->length, stripe_size);
-
- /* If an IO spans more then a single stripe it must end at
- * a stripe boundary. The reminder at the end is pushed into the
- * next IO.
- */
- if (last_stripe != first_stripe) {
- ios->length = last_stripe * stripe_size - ios->offset;
-
- BUG_ON(!ios->length);
- ios->nr_pages = (ios->length + PAGE_SIZE - 1) /
- PAGE_SIZE;
- ios->si.length = ios->length; /*make it consistent */
- }
}
return 0;
}
static struct kobj_type uuid_ktype = {
};
-void exofs_sysfs_dbg_print()
+void exofs_sysfs_dbg_print(void)
{
#ifdef CONFIG_EXOFS_DEBUG
struct kobject *k_name, *k_tmp;
* unusual file system layouts.
*/
if (ext4_block_in_group(sb, ext4_block_bitmap(sb, gdp), block_group)) {
- block_cluster = EXT4_B2C(sbi, (start -
- ext4_block_bitmap(sb, gdp)));
+ block_cluster = EXT4_B2C(sbi,
+ ext4_block_bitmap(sb, gdp) - start);
if (block_cluster < num_clusters)
block_cluster = -1;
else if (block_cluster == num_clusters) {
if (ext4_block_in_group(sb, ext4_inode_bitmap(sb, gdp), block_group)) {
inode_cluster = EXT4_B2C(sbi,
- start - ext4_inode_bitmap(sb, gdp));
+ ext4_inode_bitmap(sb, gdp) - start);
if (inode_cluster < num_clusters)
inode_cluster = -1;
else if (inode_cluster == num_clusters) {
itbl_blk = ext4_inode_table(sb, gdp);
for (i = 0; i < sbi->s_itb_per_group; i++) {
if (ext4_block_in_group(sb, itbl_blk + i, block_group)) {
- c = EXT4_B2C(sbi, start - itbl_blk + i);
+ c = EXT4_B2C(sbi, itbl_blk + i - start);
if ((c < num_clusters) || (c == inode_cluster) ||
(c == block_cluster) || (c == itbl_cluster))
continue;
else
ext4_clear_inode_flag(inode, i);
}
- ei->i_flags = flags;
ext4_set_inode_flags(inode);
inode->i_ctime = ext4_current_time(inode);
err = ext4_move_extents(filp, donor_filp, me.orig_start,
me.donor_start, me.len, &me.moved_len);
mnt_drop_write_file(filp);
- mnt_drop_write(filp->f_path.mnt);
if (copy_to_user((struct move_extent __user *)arg,
&me, sizeof(me)))
fat_encode_fh(struct inode *inode, __u32 *fh, int *lenp, struct inode *parent)
{
int len = *lenp;
- u32 ipos_h, ipos_m, ipos_l;
+ struct msdos_sb_info *sbi = MSDOS_SB(inode->i_sb);
+ loff_t i_pos;
if (len < 5) {
*lenp = 5;
return 255; /* no room */
}
- ipos_h = MSDOS_I(inode)->i_pos >> 8;
- ipos_m = (MSDOS_I(inode)->i_pos & 0xf0) << 24;
- ipos_l = (MSDOS_I(inode)->i_pos & 0x0f) << 28;
+ i_pos = fat_i_pos_read(sbi, inode);
*lenp = 5;
fh[0] = inode->i_ino;
fh[1] = inode->i_generation;
- fh[2] = ipos_h;
- fh[3] = ipos_m | MSDOS_I(inode)->i_logstart;
- fh[4] = ipos_l;
+ fh[2] = i_pos >> 8;
+ fh[3] = ((i_pos & 0xf0) << 24) | MSDOS_I(inode)->i_logstart;
+ fh[4] = (i_pos & 0x0f) << 28;
if (parent)
fh[4] |= MSDOS_I(parent)->i_logstart;
return 3;
#include <linux/sched.h>
#include <linux/pipe_fs_i.h>
-static void wait_for_partner(struct inode* inode, unsigned int *cnt)
+static int wait_for_partner(struct inode* inode, unsigned int *cnt)
{
int cur = *cnt;
if (signal_pending(current))
break;
}
+ return cur == *cnt ? -ERESTARTSYS : 0;
}
static void wake_up_partner(struct inode* inode)
* seen a writer */
filp->f_version = pipe->w_counter;
} else {
- wait_for_partner(inode, &pipe->w_counter);
- if(signal_pending(current))
+ if (wait_for_partner(inode, &pipe->w_counter))
goto err_rd;
}
}
wake_up_partner(inode);
if (!pipe->readers) {
- wait_for_partner(inode, &pipe->r_counter);
- if (signal_pending(current))
+ if (wait_for_partner(inode, &pipe->r_counter))
goto err_wr;
}
break;
/* Wait for I_SYNC. This function drops i_lock... */
inode_sleep_on_writeback(inode);
/* Inode may be gone, start again */
+ spin_lock(&wb->list_lock);
continue;
}
inode->i_state |= I_SYNC;
unsigned global_limit)
{
unsigned long t;
- char tmp[32];
unsigned limit = (1 << 16) - 1;
int err;
- if (*ppos || count >= sizeof(tmp) - 1)
- return -EINVAL;
-
- if (copy_from_user(tmp, buf, count))
+ if (*ppos)
return -EINVAL;
- tmp[count] = '\0';
-
- err = strict_strtoul(tmp, 0, &t);
+ err = kstrtoul_from_user(buf, count, 0, &t);
if (err)
return err;
static void fuse_fillattr(struct inode *inode, struct fuse_attr *attr,
struct kstat *stat)
{
+ unsigned int blkbits;
+
stat->dev = inode->i_sb->s_dev;
stat->ino = attr->ino;
stat->mode = (inode->i_mode & S_IFMT) | (attr->mode & 07777);
stat->ctime.tv_nsec = attr->ctimensec;
stat->size = attr->size;
stat->blocks = attr->blocks;
- stat->blksize = (1 << inode->i_blkbits);
+
+ if (attr->blksize != 0)
+ blkbits = ilog2(attr->blksize);
+ else
+ blkbits = inode->i_sb->s_blocksize_bits;
+
+ stat->blksize = 1 << blkbits;
}
static int fuse_do_getattr(struct inode *inode, struct kstat *stat,
if (stat) {
generic_fillattr(inode, stat);
stat->mode = fi->orig_i_mode;
+ stat->ino = fi->orig_ino;
}
}
return ret;
}
+long fuse_file_fallocate(struct file *file, int mode, loff_t offset,
+ loff_t length)
+{
+ struct fuse_file *ff = file->private_data;
+ struct fuse_conn *fc = ff->fc;
+ struct fuse_req *req;
+ struct fuse_fallocate_in inarg = {
+ .fh = ff->fh,
+ .offset = offset,
+ .length = length,
+ .mode = mode
+ };
+ int err;
+
+ if (fc->no_fallocate)
+ return -EOPNOTSUPP;
+
+ req = fuse_get_req(fc);
+ if (IS_ERR(req))
+ return PTR_ERR(req);
+
+ req->in.h.opcode = FUSE_FALLOCATE;
+ req->in.h.nodeid = ff->nodeid;
+ req->in.numargs = 1;
+ req->in.args[0].size = sizeof(inarg);
+ req->in.args[0].value = &inarg;
+ fuse_request_send(fc, req);
+ err = req->out.h.error;
+ if (err == -ENOSYS) {
+ fc->no_fallocate = 1;
+ err = -EOPNOTSUPP;
+ }
+ fuse_put_request(fc, req);
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(fuse_file_fallocate);
+
static const struct file_operations fuse_file_operations = {
.llseek = fuse_file_llseek,
.read = do_sync_read,
.unlocked_ioctl = fuse_file_ioctl,
.compat_ioctl = fuse_file_compat_ioctl,
.poll = fuse_file_poll,
+ .fallocate = fuse_file_fallocate,
};
static const struct file_operations fuse_direct_io_file_operations = {
.unlocked_ioctl = fuse_file_ioctl,
.compat_ioctl = fuse_file_compat_ioctl,
.poll = fuse_file_poll,
+ .fallocate = fuse_file_fallocate,
/* no splice_read */
};
preserve the original mode */
umode_t orig_i_mode;
+ /** 64 bit inode number */
+ u64 orig_ino;
+
/** Version of last attribute change */
u64 attr_version;
/** Are BSD file locking primitives not implemented by fs? */
unsigned no_flock:1;
+ /** Is fallocate not implemented by fs? */
+ unsigned no_fallocate:1;
+
/** The number of requests waiting for completion */
atomic_t num_waiting;
fi->nlookup = 0;
fi->attr_version = 0;
fi->writectr = 0;
+ fi->orig_ino = 0;
INIT_LIST_HEAD(&fi->write_files);
INIT_LIST_HEAD(&fi->queued_writes);
INIT_LIST_HEAD(&fi->writepages);
return 0;
}
+/*
+ * ino_t is 32-bits on 32-bit arch. We have to squash the 64-bit value down
+ * so that it will fit.
+ */
+static ino_t fuse_squash_ino(u64 ino64)
+{
+ ino_t ino = (ino_t) ino64;
+ if (sizeof(ino_t) < sizeof(u64))
+ ino ^= ino64 >> (sizeof(u64) - sizeof(ino_t)) * 8;
+ return ino;
+}
+
void fuse_change_attributes_common(struct inode *inode, struct fuse_attr *attr,
u64 attr_valid)
{
fi->attr_version = ++fc->attr_version;
fi->i_time = attr_valid;
- inode->i_ino = attr->ino;
+ inode->i_ino = fuse_squash_ino(attr->ino);
inode->i_mode = (inode->i_mode & S_IFMT) | (attr->mode & 07777);
set_nlink(inode, attr->nlink);
inode->i_uid = attr->uid;
fi->orig_i_mode = inode->i_mode;
if (!(fc->flags & FUSE_DEFAULT_PERMISSIONS))
inode->i_mode &= ~S_ISVTX;
+
+ fi->orig_ino = attr->ino;
}
void fuse_change_attributes(struct inode *inode, struct fuse_attr *attr,
struct hfsplus_sb_info *sbi = HFSPLUS_SB(inode->i_sb);
struct hfsplus_vh *vh = sbi->s_vhdr;
struct hfsplus_vh *bvh = sbi->s_backup_vhdr;
+ u32 cnid = (unsigned long)dentry->d_fsdata;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
vh->finder_info[0] = bvh->finder_info[0] =
cpu_to_be32(parent_ino(dentry));
- /* Bootloader */
- vh->finder_info[1] = bvh->finder_info[1] = cpu_to_be32(inode->i_ino);
+ /*
+ * Bootloader. Just using the inode here breaks in the case of
+ * hard links - the firmware wants the ID of the hard link file,
+ * but the inode points at the indirect inode
+ */
+ vh->finder_info[1] = bvh->finder_info[1] = cpu_to_be32(cnid);
/* Per spec, the OS X system folder - same as finder_info[0] here */
vh->finder_info[5] = bvh->finder_info[5] =
DECLARE_COMPLETION_ONSTACK(wait);
struct bio *bio;
int ret = 0;
- unsigned int io_size;
+ u64 io_size;
loff_t start;
int offset;
case F_WRLCK:
return generic_add_lease(filp, arg, flp);
default:
- BUG();
+ return -EINVAL;
}
}
EXPORT_SYMBOL(generic_setlease);
#include <linux/kthread.h>
#include <linux/sunrpc/svcauth_gss.h>
#include <linux/sunrpc/bc_xprt.h>
-#include <linux/nsproxy.h>
#include <net/inet_sock.h>
{
int ret;
- ret = svc_create_xprt(serv, "tcp", xprt->xprt_net, PF_INET,
+ ret = svc_create_xprt(serv, "tcp", &init_net, PF_INET,
nfs_callback_set_tcpport, SVC_SOCK_ANONYMOUS);
if (ret <= 0)
goto out_err;
dprintk("NFS: Callback listener port = %u (af %u)\n",
nfs_callback_tcpport, PF_INET);
- ret = svc_create_xprt(serv, "tcp", xprt->xprt_net, PF_INET6,
+ ret = svc_create_xprt(serv, "tcp", &init_net, PF_INET6,
nfs_callback_set_tcpport, SVC_SOCK_ANONYMOUS);
if (ret > 0) {
nfs_callback_tcpport6 = ret;
* fore channel connection.
* Returns the input port (0) and sets the svc_serv bc_xprt on success
*/
- ret = svc_create_xprt(serv, "tcp-bc", xprt->xprt_net, PF_INET, 0,
+ ret = svc_create_xprt(serv, "tcp-bc", &init_net, PF_INET, 0,
SVC_SOCK_ANONYMOUS);
if (ret < 0) {
rqstp = ERR_PTR(ret);
char svc_name[12];
int ret = 0;
int minorversion_setup;
- struct net *net = current->nsproxy->net_ns;
+ struct net *net = &init_net;
mutex_lock(&nfs_callback_mutex);
if (cb_info->users++ || cb_info->task != NULL) {
cb_info->users--;
if (cb_info->users == 0 && cb_info->task != NULL) {
kthread_stop(cb_info->task);
- svc_shutdown_net(cb_info->serv, current->nsproxy->net_ns);
+ svc_shutdown_net(cb_info->serv, &init_net);
svc_exit_thread(cb_info->rqst);
cb_info->serv = NULL;
cb_info->rqst = NULL;
args->csa_nrclists = ntohl(*p++);
args->csa_rclists = NULL;
if (args->csa_nrclists) {
- args->csa_rclists = kmalloc(args->csa_nrclists *
- sizeof(*args->csa_rclists),
- GFP_KERNEL);
+ args->csa_rclists = kmalloc_array(args->csa_nrclists,
+ sizeof(*args->csa_rclists),
+ GFP_KERNEL);
if (unlikely(args->csa_rclists == NULL))
goto out;
const struct cb_sequenceres *res)
{
__be32 *p;
- unsigned status = res->csr_status;
+ __be32 status = res->csr_status;
if (unlikely(status != 0))
goto out;
static void nfs4_shutdown_session(struct nfs_client *clp)
{
if (nfs4_has_session(clp)) {
- nfs4_deviceid_purge_client(clp);
nfs4_destroy_session(clp->cl_session);
nfs4_destroy_clientid(clp);
}
smp_rmb();
- BUG_ON(clp->cl_cons_state != NFS_CS_READY);
-
dprintk("<-- %s found nfs_client %p for %s\n",
__func__, clp, cl_init->hostname ?: "");
return clp;
list_for_each_entry_safe(req, tmp, &reqs, wb_list) {
if (!nfs_pageio_add_request(&desc, req)) {
+ nfs_list_remove_request(req);
nfs_list_add_request(req, &failed);
spin_lock(cinfo.lock);
dreq->flags = 0;
dreq->error = -EIO;
spin_unlock(cinfo.lock);
}
+ nfs_release_request(req);
}
nfs_pageio_complete(&desc);
- while (!list_empty(&failed))
+ while (!list_empty(&failed)) {
+ req = nfs_list_entry(failed.next);
+ nfs_list_remove_request(req);
nfs_unlock_and_release_request(req);
+ }
if (put_dreq(dreq))
nfs_direct_write_complete(dreq, dreq->inode);
nfs_list_remove_request(req);
if (dreq->flags == NFS_ODIRECT_RESCHED_WRITES) {
/* Note the rewrite will go through mds */
- kref_get(&req->wb_kref);
nfs_mark_request_commit(req, NULL, &cinfo);
- }
+ } else
+ nfs_release_request(req);
nfs_unlock_and_release_request(req);
}
if (dreq->flags == NFS_ODIRECT_RESCHED_WRITES)
bit = NFS_IOHDR_NEED_RESCHED;
else if (dreq->flags == 0) {
- memcpy(&dreq->verf, &req->wb_verf,
+ memcpy(&dreq->verf, hdr->verf,
sizeof(dreq->verf));
bit = NFS_IOHDR_NEED_COMMIT;
dreq->flags = NFS_ODIRECT_DO_COMMIT;
} else if (dreq->flags == NFS_ODIRECT_DO_COMMIT) {
- if (memcmp(&dreq->verf, &req->wb_verf, sizeof(dreq->verf))) {
+ if (memcmp(&dreq->verf, hdr->verf, sizeof(dreq->verf))) {
dreq->flags = NFS_ODIRECT_RESCHED_WRITES;
bit = NFS_IOHDR_NEED_RESCHED;
} else
static const struct cred *id_resolver_cache;
static struct key_type key_type_id_resolver_legacy;
+struct idmap {
+ struct rpc_pipe *idmap_pipe;
+ struct key_construction *idmap_key_cons;
+ struct mutex idmap_mutex;
+};
/**
* nfs_fattr_init_names - initialise the nfs_fattr owner_name/group_name fields
name, namelen, type, data,
data_size, NULL);
if (ret < 0) {
+ mutex_lock(&idmap->idmap_mutex);
ret = nfs_idmap_request_key(&key_type_id_resolver_legacy,
name, namelen, type, data,
data_size, idmap);
+ mutex_unlock(&idmap->idmap_mutex);
}
return ret;
}
/* idmap classic begins here */
module_param(nfs_idmap_cache_timeout, int, 0644);
-struct idmap {
- struct rpc_pipe *idmap_pipe;
- struct key_construction *idmap_key_cons;
-};
-
enum {
Opt_find_uid, Opt_find_gid, Opt_find_user, Opt_find_group, Opt_find_err
};
return error;
}
idmap->idmap_pipe = pipe;
+ mutex_init(&idmap->idmap_mutex);
clp->cl_idmap = idmap;
return 0;
nfsi->delegation_state = 0;
init_rwsem(&nfsi->rwsem);
nfsi->layout = NULL;
- atomic_set(&nfsi->commit_info.rpcs_out, 0);
#endif
}
INIT_LIST_HEAD(&nfsi->commit_info.list);
nfsi->npages = 0;
nfsi->commit_info.ncommit = 0;
+ atomic_set(&nfsi->commit_info.rpcs_out, 0);
atomic_set(&nfsi->silly_count, 1);
INIT_HLIST_HEAD(&nfsi->silly_list);
init_waitqueue_head(&nfsi->waitqueue);
extern const struct nfs4_minor_version_ops *nfs_v4_minor_ops[];
-extern const u32 nfs4_fattr_bitmap[2];
+extern const u32 nfs4_fattr_bitmap[3];
extern const u32 nfs4_statfs_bitmap[2];
extern const u32 nfs4_pathconf_bitmap[2];
extern const u32 nfs4_fsinfo_bitmap[3];
return -EINVAL;
case -NFS4ERR_SHARE_DENIED:
return -EACCES;
+ case -NFS4ERR_MINOR_VERS_MISMATCH:
+ return -EPROTONOSUPPORT;
default:
dprintk("%s could not handle NFSv4 error %d\n",
__func__, -err);
/*
* This is our standard bitmap for GETATTR requests.
*/
-const u32 nfs4_fattr_bitmap[2] = {
+const u32 nfs4_fattr_bitmap[3] = {
FATTR4_WORD0_TYPE
| FATTR4_WORD0_CHANGE
| FATTR4_WORD0_SIZE
| FATTR4_WORD1_TIME_MODIFY
};
+static const u32 nfs4_pnfs_open_bitmap[3] = {
+ FATTR4_WORD0_TYPE
+ | FATTR4_WORD0_CHANGE
+ | FATTR4_WORD0_SIZE
+ | FATTR4_WORD0_FSID
+ | FATTR4_WORD0_FILEID,
+ FATTR4_WORD1_MODE
+ | FATTR4_WORD1_NUMLINKS
+ | FATTR4_WORD1_OWNER
+ | FATTR4_WORD1_OWNER_GROUP
+ | FATTR4_WORD1_RAWDEV
+ | FATTR4_WORD1_SPACE_USED
+ | FATTR4_WORD1_TIME_ACCESS
+ | FATTR4_WORD1_TIME_METADATA
+ | FATTR4_WORD1_TIME_MODIFY,
+ FATTR4_WORD2_MDSTHRESHOLD
+};
+
const u32 nfs4_statfs_bitmap[2] = {
FATTR4_WORD0_FILES_AVAIL
| FATTR4_WORD0_FILES_FREE
p->o_arg.name = &dentry->d_name;
p->o_arg.server = server;
p->o_arg.bitmask = server->attr_bitmask;
+ p->o_arg.open_bitmap = &nfs4_fattr_bitmap[0];
p->o_arg.claim = NFS4_OPEN_CLAIM_NULL;
if (attrs != NULL && attrs->ia_valid != 0) {
__be32 verf[2];
opendata->f_attr.mdsthreshold = pnfs_mdsthreshold_alloc();
if (!opendata->f_attr.mdsthreshold)
goto err_opendata_put;
+ opendata->o_arg.open_bitmap = &nfs4_pnfs_open_bitmap[0];
}
if (dentry->d_inode != NULL)
opendata->state = nfs4_get_open_state(dentry->d_inode, sp);
struct nfs4_state *res;
int status;
+ fmode &= FMODE_READ|FMODE_WRITE;
do {
status = _nfs4_do_open(dir, dentry, fmode, flags, sattr, cred,
&res, ctx_th);
nfs_fattr_init(fattr);
+ /* Deal with open(O_TRUNC) */
+ if (sattr->ia_valid & ATTR_OPEN)
+ sattr->ia_valid &= ~(ATTR_MTIME|ATTR_CTIME|ATTR_OPEN);
+
+ /* Optimization: if the end result is no change, don't RPC */
+ if ((sattr->ia_valid & ~(ATTR_FILE)) == 0)
+ return 0;
+
/* Search for an existing open(O_WRITE) file */
if (sattr->ia_valid & ATTR_FILE) {
struct nfs_open_context *ctx;
}
}
- /* Deal with open(O_TRUNC) */
- if (sattr->ia_valid & ATTR_OPEN)
- sattr->ia_valid &= ~(ATTR_MTIME|ATTR_CTIME|ATTR_OPEN);
-
status = nfs4_do_setattr(inode, cred, fattr, sattr, state);
if (status == 0)
nfs_setattr_update_inode(inode, sattr);
status = rpc_call_sync(clp->cl_rpcclient, &msg, RPC_TASK_TIMEOUT);
if (status)
- pr_warn("NFS: Got error %d from the server %s on "
+ dprintk("NFS: Got error %d from the server %s on "
"DESTROY_CLIENTID.", status, clp->cl_hostname);
return status;
}
status = rpc_call_sync(session->clp->cl_rpcclient, &msg, RPC_TASK_TIMEOUT);
if (status)
- printk(KERN_WARNING
- "NFS: Got error %d from the server on DESTROY_SESSION. "
+ dprintk("NFS: Got error %d from the server on DESTROY_SESSION. "
"Session has been destroyed regardless...\n", status);
dprintk("<-- nfs4_proc_destroy_session\n");
return nfs4_wait_on_slot_tbl(&ses->fc_slot_table);
}
+static void nfs41_finish_session_reset(struct nfs_client *clp)
+{
+ clear_bit(NFS4CLNT_LEASE_CONFIRM, &clp->cl_state);
+ clear_bit(NFS4CLNT_SESSION_RESET, &clp->cl_state);
+ /* create_session negotiated new slot table */
+ clear_bit(NFS4CLNT_RECALL_SLOT, &clp->cl_state);
+ clear_bit(NFS4CLNT_BIND_CONN_TO_SESSION, &clp->cl_state);
+ nfs41_setup_state_renewal(clp);
+}
+
int nfs41_init_clientid(struct nfs_client *clp, struct rpc_cred *cred)
{
int status;
status = nfs4_proc_create_session(clp, cred);
if (status != 0)
goto out;
- clear_bit(NFS4CLNT_LEASE_CONFIRM, &clp->cl_state);
- nfs41_setup_state_renewal(clp);
+ nfs41_finish_session_reset(clp);
nfs_mark_client_ready(clp, NFS_CS_READY);
out:
return status;
status = nfs4_handle_reclaim_lease_error(clp, status);
goto out;
}
- clear_bit(NFS4CLNT_SESSION_RESET, &clp->cl_state);
- /* create_session negotiated new slot table */
- clear_bit(NFS4CLNT_RECALL_SLOT, &clp->cl_state);
- clear_bit(NFS4CLNT_BIND_CONN_TO_SESSION, &clp->cl_state);
+ nfs41_finish_session_reset(clp);
dprintk("%s: session reset was successful for server %s!\n",
__func__, clp->cl_hostname);
-
- /* Let the state manager reestablish state */
- if (!test_bit(NFS4CLNT_LEASE_EXPIRED, &clp->cl_state))
- nfs41_setup_state_renewal(clp);
out:
if (cred)
put_rpccred(cred);
}
static void encode_getfattr_open(struct xdr_stream *xdr, const u32 *bitmask,
+ const u32 *open_bitmap,
struct compound_hdr *hdr)
{
encode_getattr_three(xdr,
- bitmask[0] & nfs4_fattr_bitmap[0],
- bitmask[1] & nfs4_fattr_bitmap[1],
- bitmask[2] & FATTR4_WORD2_MDSTHRESHOLD,
+ bitmask[0] & open_bitmap[0],
+ bitmask[1] & open_bitmap[1],
+ bitmask[2] & open_bitmap[2],
hdr);
}
encode_putfh(xdr, args->fh, &hdr);
encode_open(xdr, args, &hdr);
encode_getfh(xdr, &hdr);
- encode_getfattr_open(xdr, args->bitmask, &hdr);
+ encode_getfattr_open(xdr, args->bitmask, args->open_bitmap, &hdr);
encode_nops(&hdr);
}
if (unlikely(bitmap[2] & (FATTR4_WORD2_MDSTHRESHOLD - 1U)))
return -EIO;
- if (likely(bitmap[2] & FATTR4_WORD2_MDSTHRESHOLD)) {
+ if (bitmap[2] & FATTR4_WORD2_MDSTHRESHOLD) {
+ /* Did the server return an unrequested attribute? */
+ if (unlikely(res == NULL))
+ return -EREMOTEIO;
p = xdr_inline_decode(xdr, 4);
if (unlikely(!p))
goto out_overflow;
__func__);
status = decode_first_threshold_item4(xdr, res);
+ bitmap[2] &= ~FATTR4_WORD2_MDSTHRESHOLD;
}
return status;
out_overflow:
objios->ios->done = _read_done;
dprintk("%s: offset=0x%llx length=0x%x\n", __func__,
rdata->args.offset, rdata->args.count);
- return ore_read(objios->ios);
+ ret = ore_read(objios->ios);
+ if (unlikely(ret))
+ objio_free_result(&objios->oir);
+ return ret;
}
/*
struct nfs_write_data *wdata = objios->oir.rpcdata;
struct address_space *mapping = wdata->header->inode->i_mapping;
pgoff_t index = offset / PAGE_SIZE;
- struct page *page = find_get_page(mapping, index);
+ struct page *page;
+ loff_t i_size = i_size_read(wdata->header->inode);
+
+ if (offset >= i_size) {
+ *uptodate = true;
+ dprintk("%s: g_zero_page index=0x%lx\n", __func__, index);
+ return ZERO_PAGE(0);
+ }
+ page = find_get_page(mapping, index);
if (!page) {
page = find_or_create_page(mapping, index, GFP_NOFS);
if (unlikely(!page)) {
static void __r4w_put_page(void *priv, struct page *page)
{
- dprintk("%s: index=0x%lx\n", __func__, page->index);
- page_cache_release(page);
+ dprintk("%s: index=0x%lx\n", __func__,
+ (page == ZERO_PAGE(0)) ? -1UL : page->index);
+ if (ZERO_PAGE(0) != page)
+ page_cache_release(page);
return;
}
dprintk("%s: offset=0x%llx length=0x%x\n", __func__,
wdata->args.offset, wdata->args.count);
ret = ore_write(objios->ios);
- if (unlikely(ret))
+ if (unlikely(ret)) {
+ objio_free_result(&objios->oir);
return ret;
+ }
if (objios->sync)
_write_done(objios->ios, objios);
spin_lock(&pnfs_spinlock);
local = find_pnfs_driver_locked(id);
+ if (local != NULL && !try_module_get(local->owner)) {
+ dprintk("%s: Could not grab reference on module\n", __func__);
+ local = NULL;
+ }
spin_unlock(&pnfs_spinlock);
return local;
}
if (nfss->pnfs_curr_ld) {
if (nfss->pnfs_curr_ld->clear_layoutdriver)
nfss->pnfs_curr_ld->clear_layoutdriver(nfss);
+ /* Decrement the MDS count. Purge the deviceid cache if zero */
+ if (atomic_dec_and_test(&nfss->nfs_client->cl_mds_count))
+ nfs4_deviceid_purge_client(nfss->nfs_client);
module_put(nfss->pnfs_curr_ld->owner);
}
nfss->pnfs_curr_ld = NULL;
goto out_no_driver;
}
}
- if (!try_module_get(ld_type->owner)) {
- dprintk("%s: Could not grab reference on module\n", __func__);
- goto out_no_driver;
- }
server->pnfs_curr_ld = ld_type;
if (ld_type->set_layoutdriver
&& ld_type->set_layoutdriver(server, mntfh)) {
module_put(ld_type->owner);
goto out_no_driver;
}
+ /* Bump the MDS count */
+ atomic_inc(&server->nfs_client->cl_mds_count);
dprintk("%s: pNFS module for %u set\n", __func__, id);
return;
pnfs_use_threshold(struct nfs4_threshold **dst, struct nfs4_threshold *src,
struct nfs_server *nfss)
{
- return (dst && src && src->bm != 0 &&
+ return (dst && src && src->bm != 0 && nfss->pnfs_curr_ld &&
nfss->pnfs_curr_ld->id == src->l_type);
}
/* Emulate the eof flag, which isn't normally needed in NFSv2
* as it is guaranteed to always return the file attributes
*/
- if (data->args.offset + data->args.count >= data->res.fattr->size)
+ if (data->args.offset + data->res.count >= data->res.fattr->size)
data->res.eof = 1;
}
return 0;
if (data == NULL)
goto out_no_data;
+ args->version = NFS_DEFAULT_VERSION;
switch (data->version) {
case 1:
data->namlen = 0;
if (data == NULL)
goto out_no_data;
+ args->version = 4;
+
switch (data->version) {
case 1:
if (data->host_addrlen > sizeof(args->nfs_server.address))
dfprintk(MOUNT, "--> nfs4_try_mount()\n");
+ mount_info->fill_super = nfs4_fill_super;
+
export_path = data->nfs_server.export_path;
data->nfs_server.export_path = "/";
root_mnt = nfs_do_root_mount(&nfs4_remote_fs_type, flags, mount_info,
INIT_LIST_HEAD(&hdr->rpc_list);
spin_lock_init(&hdr->lock);
atomic_set(&hdr->refcnt, 0);
+ hdr->verf = &p->verf;
}
return p;
}
goto next;
}
if (test_bit(NFS_IOHDR_NEED_COMMIT, &hdr->flags)) {
+ memcpy(&req->wb_verf, hdr->verf, sizeof(req->wb_verf));
nfs_mark_request_commit(req, hdr->lseg, &cinfo);
goto next;
}
struct nfs_write_data *data = calldata;
struct nfs_pgio_header *hdr = data->header;
int status = data->task.tk_status;
- struct nfs_page *req = hdr->req;
if ((status >= 0) && nfs_write_need_commit(data)) {
spin_lock(&hdr->lock);
if (test_bit(NFS_IOHDR_NEED_RESCHED, &hdr->flags))
; /* Do nothing */
else if (!test_and_set_bit(NFS_IOHDR_NEED_COMMIT, &hdr->flags))
- memcpy(&req->wb_verf, &data->verf, sizeof(req->wb_verf));
- else if (memcmp(&req->wb_verf, &data->verf, sizeof(req->wb_verf)))
+ memcpy(hdr->verf, &data->verf, sizeof(*hdr->verf));
+ else if (memcmp(hdr->verf, &data->verf, sizeof(*hdr->verf)))
set_bit(NFS_IOHDR_NEED_RESCHED, &hdr->flags);
spin_unlock(&hdr->lock);
}
struct nfsd4_session *ses;
int mem;
- BUG_ON(!spin_is_locked(&client_lock));
+ lockdep_assert_held(&client_lock);
ses = container_of(kref, struct nfsd4_session, se_ref);
nfsd4_del_conns(ses);
spin_lock(&nfsd_drc_lock);
static inline void
free_client(struct nfs4_client *clp)
{
- BUG_ON(!spin_is_locked(&client_lock));
+ lockdep_assert_held(&client_lock);
while (!list_empty(&clp->cl_sessions)) {
struct nfsd4_session *ses;
ses = list_entry(clp->cl_sessions.next, struct nfsd4_session,
while (!list_empty(head)) {
ii = list_first_entry(head, struct nilfs_inode_info, i_dirty);
list_del_init(&ii->i_dirty);
+ truncate_inode_pages(&ii->vfs_inode.i_data, 0);
+ nilfs_btnode_cache_clear(&ii->i_btnode_cache);
iput(&ii->vfs_inode);
}
}
if (!test_bit(NILFS_I_UPDATED, &ii->i_state))
continue;
list_del_init(&ii->i_dirty);
+ truncate_inode_pages(&ii->vfs_inode.i_data, 0);
+ nilfs_btnode_cache_clear(&ii->i_btnode_cache);
iput(&ii->vfs_inode);
}
}
stats->ls_gets++;
stats->ls_total += ktime_to_ns(kt);
/* overflow */
- if (unlikely(stats->ls_gets) == 0) {
+ if (unlikely(stats->ls_gets == 0)) {
stats->ls_gets++;
stats->ls_total = ktime_to_ns(kt);
}
static void ocfs2_schedule_blocked_lock(struct ocfs2_super *osb,
struct ocfs2_lock_res *lockres)
{
+ unsigned long flags;
+
assert_spin_locked(&lockres->l_lock);
if (lockres->l_flags & OCFS2_LOCK_FREEING) {
lockres_or_flags(lockres, OCFS2_LOCK_QUEUED);
- spin_lock(&osb->dc_task_lock);
+ spin_lock_irqsave(&osb->dc_task_lock, flags);
if (list_empty(&lockres->l_blocked_list)) {
list_add_tail(&lockres->l_blocked_list,
&osb->blocked_lock_list);
osb->blocked_lock_count++;
}
- spin_unlock(&osb->dc_task_lock);
+ spin_unlock_irqrestore(&osb->dc_task_lock, flags);
}
static void ocfs2_downconvert_thread_do_work(struct ocfs2_super *osb)
{
unsigned long processed;
+ unsigned long flags;
struct ocfs2_lock_res *lockres;
- spin_lock(&osb->dc_task_lock);
+ spin_lock_irqsave(&osb->dc_task_lock, flags);
/* grab this early so we know to try again if a state change and
* wake happens part-way through our work */
osb->dc_work_sequence = osb->dc_wake_sequence;
struct ocfs2_lock_res, l_blocked_list);
list_del_init(&lockres->l_blocked_list);
osb->blocked_lock_count--;
- spin_unlock(&osb->dc_task_lock);
+ spin_unlock_irqrestore(&osb->dc_task_lock, flags);
BUG_ON(!processed);
processed--;
ocfs2_process_blocked_lock(osb, lockres);
- spin_lock(&osb->dc_task_lock);
+ spin_lock_irqsave(&osb->dc_task_lock, flags);
}
- spin_unlock(&osb->dc_task_lock);
+ spin_unlock_irqrestore(&osb->dc_task_lock, flags);
}
static int ocfs2_downconvert_thread_lists_empty(struct ocfs2_super *osb)
{
int empty = 0;
+ unsigned long flags;
- spin_lock(&osb->dc_task_lock);
+ spin_lock_irqsave(&osb->dc_task_lock, flags);
if (list_empty(&osb->blocked_lock_list))
empty = 1;
- spin_unlock(&osb->dc_task_lock);
+ spin_unlock_irqrestore(&osb->dc_task_lock, flags);
return empty;
}
static int ocfs2_downconvert_thread_should_wake(struct ocfs2_super *osb)
{
int should_wake = 0;
+ unsigned long flags;
- spin_lock(&osb->dc_task_lock);
+ spin_lock_irqsave(&osb->dc_task_lock, flags);
if (osb->dc_work_sequence != osb->dc_wake_sequence)
should_wake = 1;
- spin_unlock(&osb->dc_task_lock);
+ spin_unlock_irqrestore(&osb->dc_task_lock, flags);
return should_wake;
}
void ocfs2_wake_downconvert_thread(struct ocfs2_super *osb)
{
- spin_lock(&osb->dc_task_lock);
+ unsigned long flags;
+
+ spin_lock_irqsave(&osb->dc_task_lock, flags);
/* make sure the voting thread gets a swipe at whatever changes
* the caller may have made to the voting state */
osb->dc_wake_sequence++;
- spin_unlock(&osb->dc_task_lock);
+ spin_unlock_irqrestore(&osb->dc_task_lock, flags);
wake_up(&osb->dc_event);
}
ocfs2_inode_unlock(inode, 0);
out:
- if (ret && ret != -ENXIO)
- ret = -ENXIO;
return ret;
}
if (ret < 0)
mlog_errno(ret);
- if (file->f_flags & O_SYNC)
+ if (file && (file->f_flags & O_SYNC))
handle->h_sync = 1;
ocfs2_commit_trans(osb, handle);
unaligned_dio = 0;
}
- if (unaligned_dio)
+ if (unaligned_dio) {
+ ocfs2_iocb_clear_unaligned_aio(iocb);
atomic_dec(&OCFS2_I(inode)->ip_unaligned_aio);
+ }
out:
if (rw_level != -1)
msecs_to_jiffies(oinfo->dqi_syncms));
out_err:
- if (status)
- mlog_errno(status);
return status;
out_unlock:
ocfs2_unlock_global_qf(oinfo, 0);
{
struct file *file;
struct inode *inode;
- int error;
+ int error, fput_needed;
error = -EBADF;
- file = fget(fd);
+ file = fget_raw_light(fd, &fput_needed);
if (!file)
goto out;
if (!error)
set_fs_pwd(current->fs, &file->f_path);
out_putf:
- fput(file);
+ fput_light(file, fput_needed);
out:
return error;
}
rcu_read_lock();
file = fcheck_files(files, fd);
if (file) {
- unsigned i_mode, f_mode = file->f_mode;
+ unsigned f_mode = file->f_mode;
rcu_read_unlock();
put_files_struct(files);
inode->i_gid = GLOBAL_ROOT_GID;
}
- i_mode = S_IFLNK;
- if (f_mode & FMODE_READ)
- i_mode |= S_IRUSR | S_IXUSR;
- if (f_mode & FMODE_WRITE)
- i_mode |= S_IWUSR | S_IXUSR;
- inode->i_mode = i_mode;
+ if (S_ISLNK(inode->i_mode)) {
+ unsigned i_mode = S_IFLNK;
+ if (f_mode & FMODE_READ)
+ i_mode |= S_IRUSR | S_IXUSR;
+ if (f_mode & FMODE_WRITE)
+ i_mode |= S_IWUSR | S_IXUSR;
+ inode->i_mode = i_mode;
+ }
security_task_to_inode(task, inode);
put_task_struct(task);
ei = PROC_I(inode);
ei->fd = fd;
+ inode->i_mode = S_IFLNK;
inode->i_op = &proc_pid_link_inode_operations;
inode->i_size = 64;
ei->op.proc_get_link = proc_fd_link;
return rc;
}
-int pstore_fill_super(struct super_block *sb, void *data, int silent)
+static int pstore_fill_super(struct super_block *sb, void *data, int silent)
{
struct inode *inode;
* as we can from the end of the buffer.
*/
static void pstore_dump(struct kmsg_dumper *dumper,
- enum kmsg_dump_reason reason,
- const char *s1, unsigned long l1,
- const char *s2, unsigned long l2)
+ enum kmsg_dump_reason reason)
{
- unsigned long s1_start, s2_start;
- unsigned long l1_cpy, l2_cpy;
- unsigned long size, total = 0;
- char *dst;
+ unsigned long total = 0;
const char *why;
u64 id;
- int hsize, ret;
unsigned int part = 1;
unsigned long flags = 0;
int is_locked = 0;
+ int ret;
why = get_reason_str(reason);
spin_lock_irqsave(&psinfo->buf_lock, flags);
oopscount++;
while (total < kmsg_bytes) {
+ char *dst;
+ unsigned long size;
+ int hsize;
+ size_t len;
+
dst = psinfo->buf;
hsize = sprintf(dst, "%s#%d Part%d\n", why, oopscount, part);
size = psinfo->bufsize - hsize;
dst += hsize;
- l2_cpy = min(l2, size);
- l1_cpy = min(l1, size - l2_cpy);
-
- if (l1_cpy + l2_cpy == 0)
+ if (!kmsg_dump_get_buffer(dumper, true, dst, size, &len))
break;
- s2_start = l2 - l2_cpy;
- s1_start = l1 - l1_cpy;
-
- memcpy(dst, s1 + s1_start, l1_cpy);
- memcpy(dst + l1_cpy, s2 + s2_start, l2_cpy);
-
ret = psinfo->write(PSTORE_TYPE_DMESG, reason, &id, part,
- hsize + l1_cpy + l2_cpy, psinfo);
+ hsize + len, psinfo);
if (ret == 0 && reason == KMSG_DUMP_OOPS && pstore_is_mounted())
pstore_new_entry = 1;
- l1 -= l1_cpy;
- l2 -= l2_cpy;
- total += l1_cpy + l2_cpy;
+
+ total += hsize + len;
part++;
}
if (in_nmi()) {
time->tv_sec = 0;
time->tv_nsec = 0;
+ /* Update old/shadowed buffer. */
+ persistent_ram_save_old(prz);
size = persistent_ram_old_size(prz);
*buf = kmalloc(size, GFP_KERNEL);
if (*buf == NULL)
return -EINVAL;
persistent_ram_free_old(cxt->przs[id]);
+ persistent_ram_zap(cxt->przs[id]);
return 0;
}
persistent_ram_update_ecc(prz, start, count);
}
-static void __init
-persistent_ram_save_old(struct persistent_ram_zone *prz)
+void persistent_ram_save_old(struct persistent_ram_zone *prz)
{
struct persistent_ram_buffer *buffer = prz->buffer;
size_t size = buffer_size(prz);
size_t start = buffer_start(prz);
- char *dest;
- persistent_ram_ecc_old(prz);
+ if (!size)
+ return;
- dest = kmalloc(size, GFP_KERNEL);
- if (dest == NULL) {
+ if (!prz->old_log) {
+ persistent_ram_ecc_old(prz);
+ prz->old_log = kmalloc(size, GFP_KERNEL);
+ }
+ if (!prz->old_log) {
pr_err("persistent_ram: failed to allocate buffer\n");
return;
}
- prz->old_log = dest;
prz->old_log_size = size;
memcpy(prz->old_log, &buffer->data[start], size - start);
memcpy(prz->old_log + size - start, &buffer->data[0], start);
prz->old_log_size = 0;
}
+void persistent_ram_zap(struct persistent_ram_zone *prz)
+{
+ atomic_set(&prz->buffer->start, 0);
+ atomic_set(&prz->buffer->size, 0);
+ persistent_ram_update_header_ecc(prz);
+}
+
static void *persistent_ram_vmap(phys_addr_t start, size_t size)
{
struct page **pages;
" size %zu, start %zu\n",
buffer_size(prz), buffer_start(prz));
persistent_ram_save_old(prz);
+ return 0;
}
} else {
pr_info("persistent_ram: no valid data in buffer"
}
prz->buffer->sig = PERSISTENT_RAM_SIG;
- atomic_set(&prz->buffer->start, 0);
- atomic_set(&prz->buffer->size, 0);
+ persistent_ram_zap(prz);
return 0;
}
goto err;
persistent_ram_post_init(prz, ecc);
- persistent_ram_update_header_ecc(prz);
return prz;
err:
/* prevent the page from being discarded on memory pressure */
SetPageDirty(page);
+ SetPageUptodate(page);
unlock_page(page);
put_page(page);
* Check if we need to grow the arrays holding pages and partial page
* descriptions.
*/
-int splice_grow_spd(struct pipe_inode_info *pipe, struct splice_pipe_desc *spd)
+int splice_grow_spd(const struct pipe_inode_info *pipe, struct splice_pipe_desc *spd)
{
- if (pipe->buffers <= PIPE_DEF_BUFFERS)
+ unsigned int buffers = ACCESS_ONCE(pipe->buffers);
+
+ spd->nr_pages_max = buffers;
+ if (buffers <= PIPE_DEF_BUFFERS)
return 0;
- spd->pages = kmalloc(pipe->buffers * sizeof(struct page *), GFP_KERNEL);
- spd->partial = kmalloc(pipe->buffers * sizeof(struct partial_page), GFP_KERNEL);
+ spd->pages = kmalloc(buffers * sizeof(struct page *), GFP_KERNEL);
+ spd->partial = kmalloc(buffers * sizeof(struct partial_page), GFP_KERNEL);
if (spd->pages && spd->partial)
return 0;
return -ENOMEM;
}
-void splice_shrink_spd(struct pipe_inode_info *pipe,
- struct splice_pipe_desc *spd)
+void splice_shrink_spd(struct splice_pipe_desc *spd)
{
- if (pipe->buffers <= PIPE_DEF_BUFFERS)
+ if (spd->nr_pages_max <= PIPE_DEF_BUFFERS)
return;
kfree(spd->pages);
struct splice_pipe_desc spd = {
.pages = pages,
.partial = partial,
+ .nr_pages_max = PIPE_DEF_BUFFERS,
.flags = flags,
.ops = &page_cache_pipe_buf_ops,
.spd_release = spd_release_page,
index = *ppos >> PAGE_CACHE_SHIFT;
loff = *ppos & ~PAGE_CACHE_MASK;
req_pages = (len + loff + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
- nr_pages = min(req_pages, pipe->buffers);
+ nr_pages = min(req_pages, spd.nr_pages_max);
/*
* Lookup the (hopefully) full range of pages we need.
if (spd.nr_pages)
error = splice_to_pipe(pipe, &spd);
- splice_shrink_spd(pipe, &spd);
+ splice_shrink_spd(&spd);
return error;
}
struct splice_pipe_desc spd = {
.pages = pages,
.partial = partial,
+ .nr_pages_max = PIPE_DEF_BUFFERS,
.flags = flags,
.ops = &default_pipe_buf_ops,
.spd_release = spd_release_page,
res = -ENOMEM;
vec = __vec;
- if (pipe->buffers > PIPE_DEF_BUFFERS) {
- vec = kmalloc(pipe->buffers * sizeof(struct iovec), GFP_KERNEL);
+ if (spd.nr_pages_max > PIPE_DEF_BUFFERS) {
+ vec = kmalloc(spd.nr_pages_max * sizeof(struct iovec), GFP_KERNEL);
if (!vec)
goto shrink_ret;
}
offset = *ppos & ~PAGE_CACHE_MASK;
nr_pages = (len + offset + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
- for (i = 0; i < nr_pages && i < pipe->buffers && len; i++) {
+ for (i = 0; i < nr_pages && i < spd.nr_pages_max && len; i++) {
struct page *page;
page = alloc_page(GFP_USER);
shrink_ret:
if (vec != __vec)
kfree(vec);
- splice_shrink_spd(pipe, &spd);
+ splice_shrink_spd(&spd);
return res;
err:
struct splice_pipe_desc spd = {
.pages = pages,
.partial = partial,
+ .nr_pages_max = PIPE_DEF_BUFFERS,
.flags = flags,
.ops = &user_page_pipe_buf_ops,
.spd_release = spd_release_page,
spd.nr_pages = get_iovec_page_array(iov, nr_segs, spd.pages,
spd.partial, false,
- pipe->buffers);
+ spd.nr_pages_max);
if (spd.nr_pages <= 0)
ret = spd.nr_pages;
else
ret = splice_to_pipe(pipe, &spd);
- splice_shrink_spd(pipe, &spd);
+ splice_shrink_spd(&spd);
return ret;
}
struct dentry *dent;
struct ubifs_debug_info *d = c->dbg;
+ if (!IS_ENABLED(CONFIG_DEBUG_FS))
+ return 0;
+
n = snprintf(d->dfs_dir_name, UBIFS_DFS_DIR_LEN + 1, UBIFS_DFS_DIR_NAME,
c->vi.ubi_num, c->vi.vol_id);
if (n == UBIFS_DFS_DIR_LEN) {
*/
void dbg_debugfs_exit_fs(struct ubifs_info *c)
{
- debugfs_remove_recursive(c->dbg->dfs_dir);
+ if (IS_ENABLED(CONFIG_DEBUG_FS))
+ debugfs_remove_recursive(c->dbg->dfs_dir);
}
struct ubifs_global_debug_info ubifs_dbg;
const char *fname;
struct dentry *dent;
+ if (!IS_ENABLED(CONFIG_DEBUG_FS))
+ return 0;
+
fname = "ubifs";
dent = debugfs_create_dir(fname, NULL);
if (IS_ERR_OR_NULL(dent))
*/
void dbg_debugfs_exit(void)
{
- debugfs_remove_recursive(dfs_rootdir);
+ if (IS_ENABLED(CONFIG_DEBUG_FS))
+ debugfs_remove_recursive(dfs_rootdir);
}
/**
}
dbg_find("LEB %d, dirty %d and free %d flags %#x", lp->lnum, lp->dirty,
lp->free, lp->flags);
- ubifs_assert(lp->flags | LPROPS_TAKEN);
- ubifs_assert(lp->flags | LPROPS_INDEX);
+ ubifs_assert(lp->flags & LPROPS_TAKEN);
+ ubifs_assert(lp->flags & LPROPS_INDEX);
return lnum;
}
lnum = ubifs_next_log_lnum(c, lnum);
}
- /* Fixup the current log head */
- err = fixup_leb(c, c->lhead_lnum, c->lhead_offs);
+ /*
+ * Fixup the log head which contains the only a CS node at the
+ * beginning.
+ */
+ err = fixup_leb(c, c->lhead_lnum,
+ ALIGN(UBIFS_CS_NODE_SZ, c->min_io_size));
if (err)
goto out;
#include <linux/seq_file.h>
#include <linux/bitmap.h>
#include <linux/crc-itu-t.h>
+#include <linux/log2.h>
#include <asm/byteorder.h>
#include "udf_sb.h"
return ret;
}
+static int udf_load_sparable_map(struct super_block *sb,
+ struct udf_part_map *map,
+ struct sparablePartitionMap *spm)
+{
+ uint32_t loc;
+ uint16_t ident;
+ struct sparingTable *st;
+ struct udf_sparing_data *sdata = &map->s_type_specific.s_sparing;
+ int i;
+ struct buffer_head *bh;
+
+ map->s_partition_type = UDF_SPARABLE_MAP15;
+ sdata->s_packet_len = le16_to_cpu(spm->packetLength);
+ if (!is_power_of_2(sdata->s_packet_len)) {
+ udf_err(sb, "error loading logical volume descriptor: "
+ "Invalid packet length %u\n",
+ (unsigned)sdata->s_packet_len);
+ return -EIO;
+ }
+ if (spm->numSparingTables > 4) {
+ udf_err(sb, "error loading logical volume descriptor: "
+ "Too many sparing tables (%d)\n",
+ (int)spm->numSparingTables);
+ return -EIO;
+ }
+
+ for (i = 0; i < spm->numSparingTables; i++) {
+ loc = le32_to_cpu(spm->locSparingTable[i]);
+ bh = udf_read_tagged(sb, loc, loc, &ident);
+ if (!bh)
+ continue;
+
+ st = (struct sparingTable *)bh->b_data;
+ if (ident != 0 ||
+ strncmp(st->sparingIdent.ident, UDF_ID_SPARING,
+ strlen(UDF_ID_SPARING)) ||
+ sizeof(*st) + le16_to_cpu(st->reallocationTableLen) >
+ sb->s_blocksize) {
+ brelse(bh);
+ continue;
+ }
+
+ sdata->s_spar_map[i] = bh;
+ }
+ map->s_partition_func = udf_get_pblock_spar15;
+ return 0;
+}
+
static int udf_load_logicalvol(struct super_block *sb, sector_t block,
struct kernel_lb_addr *fileset)
{
struct logicalVolDesc *lvd;
- int i, j, offset;
+ int i, offset;
uint8_t type;
struct udf_sb_info *sbi = UDF_SB(sb);
struct genericPartitionMap *gpm;
uint16_t ident;
struct buffer_head *bh;
+ unsigned int table_len;
int ret = 0;
bh = udf_read_tagged(sb, block, block, &ident);
return 1;
BUG_ON(ident != TAG_IDENT_LVD);
lvd = (struct logicalVolDesc *)bh->b_data;
-
- i = udf_sb_alloc_partition_maps(sb, le32_to_cpu(lvd->numPartitionMaps));
- if (i != 0) {
- ret = i;
+ table_len = le32_to_cpu(lvd->mapTableLength);
+ if (sizeof(*lvd) + table_len > sb->s_blocksize) {
+ udf_err(sb, "error loading logical volume descriptor: "
+ "Partition table too long (%u > %lu)\n", table_len,
+ sb->s_blocksize - sizeof(*lvd));
goto out_bh;
}
+ ret = udf_sb_alloc_partition_maps(sb, le32_to_cpu(lvd->numPartitionMaps));
+ if (ret)
+ goto out_bh;
+
for (i = 0, offset = 0;
- i < sbi->s_partitions && offset < le32_to_cpu(lvd->mapTableLength);
+ i < sbi->s_partitions && offset < table_len;
i++, offset += gpm->partitionMapLength) {
struct udf_part_map *map = &sbi->s_partmaps[i];
gpm = (struct genericPartitionMap *)
} else if (!strncmp(upm2->partIdent.ident,
UDF_ID_SPARABLE,
strlen(UDF_ID_SPARABLE))) {
- uint32_t loc;
- struct sparingTable *st;
- struct sparablePartitionMap *spm =
- (struct sparablePartitionMap *)gpm;
-
- map->s_partition_type = UDF_SPARABLE_MAP15;
- map->s_type_specific.s_sparing.s_packet_len =
- le16_to_cpu(spm->packetLength);
- for (j = 0; j < spm->numSparingTables; j++) {
- struct buffer_head *bh2;
-
- loc = le32_to_cpu(
- spm->locSparingTable[j]);
- bh2 = udf_read_tagged(sb, loc, loc,
- &ident);
- map->s_type_specific.s_sparing.
- s_spar_map[j] = bh2;
-
- if (bh2 == NULL)
- continue;
-
- st = (struct sparingTable *)bh2->b_data;
- if (ident != 0 || strncmp(
- st->sparingIdent.ident,
- UDF_ID_SPARING,
- strlen(UDF_ID_SPARING))) {
- brelse(bh2);
- map->s_type_specific.s_sparing.
- s_spar_map[j] = NULL;
- }
- }
- map->s_partition_func = udf_get_pblock_spar15;
+ if (udf_load_sparable_map(sb, map,
+ (struct sparablePartitionMap *)gpm) < 0)
+ goto out_bh;
} else if (!strncmp(upm2->partIdent.ident,
UDF_ID_METADATA,
strlen(UDF_ID_METADATA))) {
* If we couldn't get anything, give up.
*/
if (bno_cur_lt == NULL && bno_cur_gt == NULL) {
+ xfs_btree_del_cursor(cnt_cur, XFS_BTREE_NOERROR);
+
if (!forced++) {
trace_xfs_alloc_near_busy(args);
xfs_log_force(args->mp, XFS_LOG_SYNC);
goto restart;
}
-
trace_xfs_alloc_size_neither(args);
args->agbno = NULLAGBLOCK;
return 0;
current_restore_flags_nested(&pflags, PF_FSTRANS);
}
-
-int /* error */
+/*
+ * Data allocation requests often come in with little stack to work on. Push
+ * them off to a worker thread so there is lots of stack to use. Metadata
+ * requests, OTOH, are generally from low stack usage paths, so avoid the
+ * context switch overhead here.
+ */
+int
xfs_alloc_vextent(
- xfs_alloc_arg_t *args) /* allocation argument structure */
+ struct xfs_alloc_arg *args)
{
DECLARE_COMPLETION_ONSTACK(done);
+ if (!args->userdata)
+ return __xfs_alloc_vextent(args);
+
+
args->done = &done;
- INIT_WORK(&args->work, xfs_alloc_vextent_worker);
+ INIT_WORK_ONSTACK(&args->work, xfs_alloc_vextent_worker);
queue_work(xfs_alloc_wq, &args->work);
wait_for_completion(&done);
return args->result;
imap_valid = 0;
}
} else {
- if (PageUptodate(page)) {
+ if (PageUptodate(page))
ASSERT(buffer_mapped(bh));
- imap_valid = 0;
- }
+ /*
+ * This buffer is not uptodate and will not be
+ * written to disk. Ensure that we will put any
+ * subsequent writeable buffers into a new
+ * ioend.
+ */
+ imap_valid = 0;
continue;
}
bp->b_length = numblks;
bp->b_io_length = numblks;
bp->b_flags = flags;
-
- /*
- * We do not set the block number here in the buffer because we have not
- * finished initialising the buffer. We insert the buffer into the cache
- * in this state, so this ensures that we are unable to do IO on a
- * buffer that hasn't been fully initialised.
- */
- bp->b_bn = XFS_BUF_DADDR_NULL;
+ bp->b_bn = blkno;
atomic_set(&bp->b_pin_count, 0);
init_waitqueue_head(&bp->b_waiters);
if (bp != new_bp)
xfs_buf_free(new_bp);
- /*
- * Now we have a workable buffer, fill in the block number so
- * that we can do IO on it.
- */
- bp->b_bn = blkno;
bp->b_io_length = bp->b_length;
found:
int error, i;
xfs_buf_t *bp;
- bp = xfs_buf_alloc(target, 0, numblks, 0);
+ bp = xfs_buf_alloc(target, XFS_BUF_DADDR_NULL, numblks, 0);
if (unlikely(bp == NULL))
goto fail;
(__uint64_t)XFS_BUF_ADDR(bp), func, bp->b_error, bp->b_length);
}
-int
-xfs_bwrite(
- struct xfs_buf *bp)
-{
- int error;
-
- ASSERT(xfs_buf_islocked(bp));
-
- bp->b_flags |= XBF_WRITE;
- bp->b_flags &= ~(XBF_ASYNC | XBF_READ | _XBF_DELWRI_Q);
-
- xfs_bdstrat_cb(bp);
-
- error = xfs_buf_iowait(bp);
- if (error) {
- xfs_force_shutdown(bp->b_target->bt_mount,
- SHUTDOWN_META_IO_ERROR);
- }
- return error;
-}
-
/*
* Called when we want to stop a buffer from getting written or read.
* We attach the EIO error, muck with its flags, and call xfs_buf_ioend
return EIO;
}
-
-/*
- * All xfs metadata buffers except log state machine buffers
- * get this attached as their b_bdstrat callback function.
- * This is so that we can catch a buffer
- * after prematurely unpinning it to forcibly shutdown the filesystem.
- */
-int
+STATIC int
xfs_bdstrat_cb(
struct xfs_buf *bp)
{
return 0;
}
+int
+xfs_bwrite(
+ struct xfs_buf *bp)
+{
+ int error;
+
+ ASSERT(xfs_buf_islocked(bp));
+
+ bp->b_flags |= XBF_WRITE;
+ bp->b_flags &= ~(XBF_ASYNC | XBF_READ | _XBF_DELWRI_Q);
+
+ xfs_bdstrat_cb(bp);
+
+ error = xfs_buf_iowait(bp);
+ if (error) {
+ xfs_force_shutdown(bp->b_target->bt_mount,
+ SHUTDOWN_META_IO_ERROR);
+ }
+ return error;
+}
+
/*
* Wrapper around bdstrat so that we can stop data from going to disk in case
* we are shutting down the filesystem. Typically user data goes thru this
*/
atomic_set(&bp->b_io_remaining, 1);
_xfs_buf_ioapply(bp);
- _xfs_buf_ioend(bp, 0);
+ _xfs_buf_ioend(bp, 1);
xfs_buf_rele(bp);
}
extern int xfs_bwrite(struct xfs_buf *bp);
extern void xfsbdstrat(struct xfs_mount *, struct xfs_buf *);
-extern int xfs_bdstrat_cb(struct xfs_buf *);
extern void xfs_buf_ioend(xfs_buf_t *, int);
extern void xfs_buf_ioerror(xfs_buf_t *, int);
if (!XFS_BUF_ISSTALE(bp)) {
bp->b_flags |= XBF_WRITE | XBF_ASYNC | XBF_DONE;
- xfs_bdstrat_cb(bp);
+ xfs_buf_iorequest(bp);
} else {
xfs_buf_relse(bp);
}
goto out_unlock;
}
+ /*
+ * Stale inode items should force out the iclog.
+ */
+ if (ip->i_flags & XFS_ISTALE) {
+ rval = XFS_ITEM_PINNED;
+ goto out_unlock;
+ }
+
/*
* Someone else is already flushing the inode. Nothing we can do
* here but wait for the flush to finish and remove the item from
goto out_unlock;
}
- /*
- * Stale inode items should force out the iclog.
- */
- if (ip->i_flags & XFS_ISTALE) {
- xfs_ifunlock(ip);
- xfs_iunlock(ip, XFS_ILOCK_SHARED);
- return XFS_ITEM_PINNED;
- }
-
ASSERT(iip->ili_fields != 0 || XFS_FORCED_SHUTDOWN(ip->i_mount));
ASSERT(iip->ili_logged == 0 || XFS_FORCED_SHUTDOWN(ip->i_mount));
kmem_zone_t *xfs_log_ticket_zone;
/* Local miscellaneous function prototypes */
-STATIC int xlog_commit_record(struct log *log, struct xlog_ticket *ticket,
- xlog_in_core_t **, xfs_lsn_t *);
+STATIC int
+xlog_commit_record(
+ struct xlog *log,
+ struct xlog_ticket *ticket,
+ struct xlog_in_core **iclog,
+ xfs_lsn_t *commitlsnp);
+
STATIC xlog_t * xlog_alloc_log(xfs_mount_t *mp,
xfs_buftarg_t *log_target,
xfs_daddr_t blk_offset,
int num_bblks);
-STATIC int xlog_space_left(struct log *log, atomic64_t *head);
+STATIC int
+xlog_space_left(
+ struct xlog *log,
+ atomic64_t *head);
STATIC int xlog_sync(xlog_t *log, xlog_in_core_t *iclog);
STATIC void xlog_dealloc_log(xlog_t *log);
int eventual_size);
STATIC void xlog_state_want_sync(xlog_t *log, xlog_in_core_t *iclog);
-STATIC void xlog_grant_push_ail(struct log *log,
- int need_bytes);
+STATIC void
+xlog_grant_push_ail(
+ struct xlog *log,
+ int need_bytes);
STATIC void xlog_regrant_reserve_log_space(xlog_t *log,
xlog_ticket_t *ticket);
STATIC void xlog_ungrant_log_space(xlog_t *log,
#if defined(DEBUG)
STATIC void xlog_verify_dest_ptr(xlog_t *log, char *ptr);
-STATIC void xlog_verify_grant_tail(struct log *log);
+STATIC void
+xlog_verify_grant_tail(
+ struct xlog *log);
STATIC void xlog_verify_iclog(xlog_t *log, xlog_in_core_t *iclog,
int count, boolean_t syncing);
STATIC void xlog_verify_tail_lsn(xlog_t *log, xlog_in_core_t *iclog,
static void
xlog_grant_sub_space(
- struct log *log,
- atomic64_t *head,
- int bytes)
+ struct xlog *log,
+ atomic64_t *head,
+ int bytes)
{
int64_t head_val = atomic64_read(head);
int64_t new, old;
static void
xlog_grant_add_space(
- struct log *log,
- atomic64_t *head,
- int bytes)
+ struct xlog *log,
+ atomic64_t *head,
+ int bytes)
{
int64_t head_val = atomic64_read(head);
int64_t new, old;
static inline int
xlog_ticket_reservation(
- struct log *log,
+ struct xlog *log,
struct xlog_grant_head *head,
struct xlog_ticket *tic)
{
STATIC bool
xlog_grant_head_wake(
- struct log *log,
+ struct xlog *log,
struct xlog_grant_head *head,
int *free_bytes)
{
STATIC int
xlog_grant_head_wait(
- struct log *log,
+ struct xlog *log,
struct xlog_grant_head *head,
struct xlog_ticket *tic,
int need_bytes)
*/
STATIC int
xlog_grant_head_check(
- struct log *log,
+ struct xlog *log,
struct xlog_grant_head *head,
struct xlog_ticket *tic,
int *need_bytes)
struct xfs_mount *mp,
struct xlog_ticket *tic)
{
- struct log *log = mp->m_log;
+ struct xlog *log = mp->m_log;
int need_bytes;
int error = 0;
bool permanent,
uint t_type)
{
- struct log *log = mp->m_log;
+ struct xlog *log = mp->m_log;
struct xlog_ticket *tic;
int need_bytes;
int error = 0;
struct xlog_in_core **iclog,
uint flags)
{
- struct log *log = mp->m_log;
+ struct xlog *log = mp->m_log;
xfs_lsn_t lsn = 0;
if (XLOG_FORCED_SHUTDOWN(log) ||
void
xfs_log_unmount(xfs_mount_t *mp)
{
+ cancel_delayed_work_sync(&mp->m_sync_work);
xfs_trans_ail_destroy(mp);
xlog_dealloc_log(mp->m_log);
}
xfs_log_space_wake(
struct xfs_mount *mp)
{
- struct log *log = mp->m_log;
+ struct xlog *log = mp->m_log;
int free_bytes;
if (XLOG_FORCED_SHUTDOWN(log))
xlog_assign_tail_lsn_locked(
struct xfs_mount *mp)
{
- struct log *log = mp->m_log;
+ struct xlog *log = mp->m_log;
struct xfs_log_item *lip;
xfs_lsn_t tail_lsn;
*/
STATIC int
xlog_space_left(
- struct log *log,
+ struct xlog *log,
atomic64_t *head)
{
int free_bytes;
*/
STATIC int
xlog_commit_record(
- struct log *log,
+ struct xlog *log,
struct xlog_ticket *ticket,
struct xlog_in_core **iclog,
xfs_lsn_t *commitlsnp)
*/
STATIC void
xlog_grant_push_ail(
- struct log *log,
+ struct xlog *log,
int need_bytes)
{
xfs_lsn_t threshold_lsn = 0;
static xlog_op_header_t *
xlog_write_setup_ophdr(
- struct log *log,
+ struct xlog *log,
struct xlog_op_header *ophdr,
struct xlog_ticket *ticket,
uint flags)
static int
xlog_write_copy_finish(
- struct log *log,
+ struct xlog *log,
struct xlog_in_core *iclog,
uint flags,
int *record_cnt,
*/
int
xlog_write(
- struct log *log,
+ struct xlog *log,
struct xfs_log_vec *log_vector,
struct xlog_ticket *ticket,
xfs_lsn_t *start_lsn,
uint flags,
int *log_flushed)
{
- struct log *log = mp->m_log;
+ struct xlog *log = mp->m_log;
struct xlog_in_core *iclog;
xfs_lsn_t lsn;
uint flags,
int *log_flushed)
{
- struct log *log = mp->m_log;
+ struct xlog *log = mp->m_log;
struct xlog_in_core *iclog;
int already_slept = 0;
*/
xlog_ticket_t *
xlog_ticket_alloc(
- struct log *log,
+ struct xlog *log,
int unit_bytes,
int cnt,
char client,
*/
void
xlog_verify_dest_ptr(
- struct log *log,
+ struct xlog *log,
char *ptr)
{
int i;
*/
STATIC void
xlog_verify_grant_tail(
- struct log *log)
+ struct xlog *log)
{
int tail_cycle, tail_blocks;
int cycle, space;
*/
static struct xlog_ticket *
xlog_cil_ticket_alloc(
- struct log *log)
+ struct xlog *log)
{
struct xlog_ticket *tic;
*/
void
xlog_cil_init_post_recovery(
- struct log *log)
+ struct xlog *log)
{
log->l_cilp->xc_ctx->ticket = xlog_cil_ticket_alloc(log);
log->l_cilp->xc_ctx->sequence = 1;
*/
STATIC void
xfs_cil_prepare_item(
- struct log *log,
+ struct xlog *log,
struct xfs_log_vec *lv,
int *len,
int *diff_iovecs)
*/
static void
xlog_cil_insert_items(
- struct log *log,
+ struct xlog *log,
struct xfs_log_vec *log_vector,
struct xlog_ticket *ticket)
{
*/
STATIC int
xlog_cil_push(
- struct log *log)
+ struct xlog *log)
{
struct xfs_cil *cil = log->l_cilp;
struct xfs_log_vec *lv;
*/
static void
xlog_cil_push_background(
- struct log *log)
+ struct xlog *log)
{
struct xfs_cil *cil = log->l_cilp;
static void
xlog_cil_push_foreground(
- struct log *log,
+ struct xlog *log,
xfs_lsn_t push_seq)
{
struct xfs_cil *cil = log->l_cilp;
xfs_lsn_t *commit_lsn,
int flags)
{
- struct log *log = mp->m_log;
+ struct xlog *log = mp->m_log;
int log_flags = 0;
struct xfs_log_vec *log_vector;
*/
xfs_lsn_t
xlog_cil_force_lsn(
- struct log *log,
+ struct xlog *log,
xfs_lsn_t sequence)
{
struct xfs_cil *cil = log->l_cilp;
*/
int
xlog_cil_init(
- struct log *log)
+ struct xlog *log)
{
struct xfs_cil *cil;
struct xfs_cil_ctx *ctx;
void
xlog_cil_destroy(
- struct log *log)
+ struct xlog *log)
{
if (log->l_cilp->xc_ctx) {
if (log->l_cilp->xc_ctx->ticket)
#define __XFS_LOG_PRIV_H__
struct xfs_buf;
-struct log;
+struct xlog;
struct xlog_ticket;
struct xfs_mount;
struct xlog_in_core *ic_next;
struct xlog_in_core *ic_prev;
struct xfs_buf *ic_bp;
- struct log *ic_log;
+ struct xlog *ic_log;
int ic_size;
int ic_offset;
int ic_bwritecnt;
* operations almost as efficient as the old logging methods.
*/
struct xfs_cil {
- struct log *xc_log;
+ struct xlog *xc_log;
struct list_head xc_cil;
spinlock_t xc_cil_lock;
struct xfs_cil_ctx *xc_ctx;
* overflow 31 bits worth of byte offset, so using a byte number will mean
* that round off problems won't occur when releasing partial reservations.
*/
-typedef struct log {
+typedef struct xlog {
/* The following fields don't need locking */
struct xfs_mount *l_mp; /* mount point */
struct xfs_ail *l_ailp; /* AIL log is working with */
extern void xlog_pack_data(xlog_t *log, xlog_in_core_t *iclog, int);
extern kmem_zone_t *xfs_log_ticket_zone;
-struct xlog_ticket *xlog_ticket_alloc(struct log *log, int unit_bytes,
- int count, char client, bool permanent,
- xfs_km_flags_t alloc_flags);
+struct xlog_ticket *
+xlog_ticket_alloc(
+ struct xlog *log,
+ int unit_bytes,
+ int count,
+ char client,
+ bool permanent,
+ xfs_km_flags_t alloc_flags);
static inline void
}
void xlog_print_tic_res(struct xfs_mount *mp, struct xlog_ticket *ticket);
-int xlog_write(struct log *log, struct xfs_log_vec *log_vector,
- struct xlog_ticket *tic, xfs_lsn_t *start_lsn,
- xlog_in_core_t **commit_iclog, uint flags);
+int
+xlog_write(
+ struct xlog *log,
+ struct xfs_log_vec *log_vector,
+ struct xlog_ticket *tic,
+ xfs_lsn_t *start_lsn,
+ struct xlog_in_core **commit_iclog,
+ uint flags);
/*
* When we crack an atomic LSN, we sample it first so that the value will not
/*
* Committed Item List interfaces
*/
-int xlog_cil_init(struct log *log);
-void xlog_cil_init_post_recovery(struct log *log);
-void xlog_cil_destroy(struct log *log);
+int
+xlog_cil_init(struct xlog *log);
+void
+xlog_cil_init_post_recovery(struct xlog *log);
+void
+xlog_cil_destroy(struct xlog *log);
/*
* CIL force routines
*/
-xfs_lsn_t xlog_cil_force_lsn(struct log *log, xfs_lsn_t sequence);
+xfs_lsn_t
+xlog_cil_force_lsn(
+ struct xlog *log,
+ xfs_lsn_t sequence);
static inline void
-xlog_cil_force(struct log *log)
+xlog_cil_force(struct xlog *log)
{
xlog_cil_force_lsn(log, log->l_cilp->xc_current_sequence);
}
STATIC int
xlog_recover_add_to_cont_trans(
- struct log *log,
- xlog_recover_t *trans,
+ struct xlog *log,
+ struct xlog_recover *trans,
xfs_caddr_t dp,
int len)
{
*/
STATIC int
xlog_recover_add_to_trans(
- struct log *log,
- xlog_recover_t *trans,
+ struct xlog *log,
+ struct xlog_recover *trans,
xfs_caddr_t dp,
int len)
{
*/
STATIC int
xlog_recover_reorder_trans(
- struct log *log,
- xlog_recover_t *trans,
+ struct xlog *log,
+ struct xlog_recover *trans,
int pass)
{
xlog_recover_item_t *item, *n;
*/
STATIC int
xlog_recover_buffer_pass1(
- struct log *log,
- xlog_recover_item_t *item)
+ struct xlog *log,
+ struct xlog_recover_item *item)
{
xfs_buf_log_format_t *buf_f = item->ri_buf[0].i_addr;
struct list_head *bucket;
*/
STATIC int
xlog_check_buffer_cancelled(
- struct log *log,
+ struct xlog *log,
xfs_daddr_t blkno,
uint len,
ushort flags)
STATIC int
xlog_recover_commit_pass1(
- struct log *log,
- struct xlog_recover *trans,
- xlog_recover_item_t *item)
+ struct xlog *log,
+ struct xlog_recover *trans,
+ struct xlog_recover_item *item)
{
trace_xfs_log_recover_item_recover(log, trans, item, XLOG_RECOVER_PASS1);
STATIC int
xlog_recover_commit_pass2(
- struct log *log,
- struct xlog_recover *trans,
- struct list_head *buffer_list,
- xlog_recover_item_t *item)
+ struct xlog *log,
+ struct xlog_recover *trans,
+ struct list_head *buffer_list,
+ struct xlog_recover_item *item)
{
trace_xfs_log_recover_item_recover(log, trans, item, XLOG_RECOVER_PASS2);
*/
STATIC int
xlog_recover_commit_trans(
- struct log *log,
+ struct xlog *log,
struct xlog_recover *trans,
int pass)
{
STATIC int
xlog_recover_unmount_trans(
- struct log *log,
- xlog_recover_t *trans)
+ struct xlog *log,
+ struct xlog_recover *trans)
{
/* Do nothing now */
xfs_warn(log->l_mp, "%s: Unmount LR", __func__);
#include "xfs_sync.h"
-struct log;
+struct xlog;
struct xfs_mount_args;
struct xfs_inode;
struct xfs_bmbt_irec;
uint m_readio_blocks; /* min read size blocks */
uint m_writeio_log; /* min write size log bytes */
uint m_writeio_blocks; /* min write size blocks */
- struct log *m_log; /* log specific stuff */
+ struct xlog *m_log; /* log specific stuff */
int m_logbufs; /* number of log buffers */
int m_logbsize; /* size of each log buffer */
uint m_rsumlevels; /* rt summary levels */
* We shouldn't write/force the log if we are in the mount/unmount
* process or on a read only filesystem. The workqueue still needs to be
* active in both cases, however, because it is used for inode reclaim
- * during these times. Use the s_umount semaphore to provide exclusion
- * with unmount.
+ * during these times. Use the MS_ACTIVE flag to avoid doing anything
+ * during mount. Doing work during unmount is avoided by calling
+ * cancel_delayed_work_sync on this work queue before tearing down
+ * the ail and the log in xfs_log_unmount.
*/
- if (down_read_trylock(&mp->m_super->s_umount)) {
- if (!(mp->m_flags & XFS_MOUNT_RDONLY)) {
- /* dgc: errors ignored here */
- if (mp->m_super->s_frozen == SB_UNFROZEN &&
- xfs_log_need_covered(mp))
- error = xfs_fs_log_dummy(mp);
- else
- xfs_log_force(mp, 0);
-
- /* start pushing all the metadata that is currently
- * dirty */
- xfs_ail_push_all(mp->m_ail);
- }
- up_read(&mp->m_super->s_umount);
+ if (!(mp->m_super->s_flags & MS_ACTIVE) &&
+ !(mp->m_flags & XFS_MOUNT_RDONLY)) {
+ /* dgc: errors ignored here */
+ if (mp->m_super->s_frozen == SB_UNFROZEN &&
+ xfs_log_need_covered(mp))
+ error = xfs_fs_log_dummy(mp);
+ else
+ xfs_log_force(mp, 0);
+
+ /* start pushing all the metadata that is currently
+ * dirty */
+ xfs_ail_push_all(mp->m_ail);
}
/* queue us up again */
struct xfs_dquot;
struct xfs_log_item;
struct xlog_ticket;
-struct log;
+struct xlog;
struct xlog_recover;
struct xlog_recover_item;
struct xfs_buf_log_format;
DEFINE_DQUOT_EVENT(xfs_dqflush_done);
DECLARE_EVENT_CLASS(xfs_loggrant_class,
- TP_PROTO(struct log *log, struct xlog_ticket *tic),
+ TP_PROTO(struct xlog *log, struct xlog_ticket *tic),
TP_ARGS(log, tic),
TP_STRUCT__entry(
__field(dev_t, dev)
#define DEFINE_LOGGRANT_EVENT(name) \
DEFINE_EVENT(xfs_loggrant_class, name, \
- TP_PROTO(struct log *log, struct xlog_ticket *tic), \
+ TP_PROTO(struct xlog *log, struct xlog_ticket *tic), \
TP_ARGS(log, tic))
DEFINE_LOGGRANT_EVENT(xfs_log_done_nonperm);
DEFINE_LOGGRANT_EVENT(xfs_log_done_perm);
DEFINE_SWAPEXT_EVENT(xfs_swap_extent_after);
DECLARE_EVENT_CLASS(xfs_log_recover_item_class,
- TP_PROTO(struct log *log, struct xlog_recover *trans,
+ TP_PROTO(struct xlog *log, struct xlog_recover *trans,
struct xlog_recover_item *item, int pass),
TP_ARGS(log, trans, item, pass),
TP_STRUCT__entry(
#define DEFINE_LOG_RECOVER_ITEM(name) \
DEFINE_EVENT(xfs_log_recover_item_class, name, \
- TP_PROTO(struct log *log, struct xlog_recover *trans, \
+ TP_PROTO(struct xlog *log, struct xlog_recover *trans, \
struct xlog_recover_item *item, int pass), \
TP_ARGS(log, trans, item, pass))
DEFINE_LOG_RECOVER_ITEM(xfs_log_recover_item_recover);
DECLARE_EVENT_CLASS(xfs_log_recover_buf_item_class,
- TP_PROTO(struct log *log, struct xfs_buf_log_format *buf_f),
+ TP_PROTO(struct xlog *log, struct xfs_buf_log_format *buf_f),
TP_ARGS(log, buf_f),
TP_STRUCT__entry(
__field(dev_t, dev)
#define DEFINE_LOG_RECOVER_BUF_ITEM(name) \
DEFINE_EVENT(xfs_log_recover_buf_item_class, name, \
- TP_PROTO(struct log *log, struct xfs_buf_log_format *buf_f), \
+ TP_PROTO(struct xlog *log, struct xfs_buf_log_format *buf_f), \
TP_ARGS(log, buf_f))
DEFINE_LOG_RECOVER_BUF_ITEM(xfs_log_recover_buf_not_cancel);
DEFINE_LOG_RECOVER_BUF_ITEM(xfs_log_recover_buf_dquot_buf);
DECLARE_EVENT_CLASS(xfs_log_recover_ino_item_class,
- TP_PROTO(struct log *log, struct xfs_inode_log_format *in_f),
+ TP_PROTO(struct xlog *log, struct xfs_inode_log_format *in_f),
TP_ARGS(log, in_f),
TP_STRUCT__entry(
__field(dev_t, dev)
)
#define DEFINE_LOG_RECOVER_INO_ITEM(name) \
DEFINE_EVENT(xfs_log_recover_ino_item_class, name, \
- TP_PROTO(struct log *log, struct xfs_inode_log_format *in_f), \
+ TP_PROTO(struct xlog *log, struct xfs_inode_log_format *in_f), \
TP_ARGS(log, in_f))
DEFINE_LOG_RECOVER_INO_ITEM(xfs_log_recover_inode_recover);
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
#define AE_CODE_ACPI_TABLES 0x2000
#define AE_CODE_AML 0x3000
#define AE_CODE_CONTROL 0x4000
+#define AE_CODE_MAX 0x4000
#define AE_CODE_MASK 0xF000
#define ACPI_SUCCESS(a) (!(a))
/* Exception strings for acpi_format_exception */
-#ifdef DEFINE_ACPI_GLOBALS
+#ifdef ACPI_DEFINE_EXCEPTION_TABLE
/*
* String versions of the exception codes above
"AE_CTRL_PARSE_PENDING"
};
-#endif /* ACPI GLOBALS */
+#endif /* EXCEPTION_TABLE */
#endif /* __ACEXCEP_H__ */
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
#define ACPI_WARNING(plist) acpi_warning plist
#define ACPI_EXCEPTION(plist) acpi_exception plist
#define ACPI_ERROR(plist) acpi_error plist
+#define ACPI_BIOS_WARNING(plist) acpi_bios_warning plist
+#define ACPI_BIOS_ERROR(plist) acpi_bios_error plist
#define ACPI_DEBUG_OBJECT(obj,l,i) acpi_ex_do_debug_object(obj,l,i)
#else
#define ACPI_WARNING(plist)
#define ACPI_EXCEPTION(plist)
#define ACPI_ERROR(plist)
+#define ACPI_BIOS_WARNING(plist)
+#define ACPI_BIOS_ERROR(plist)
#define ACPI_DEBUG_OBJECT(obj,l,i)
#endif /* ACPI_NO_ERROR_MESSAGES */
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
#else /* CONFIG_ACPI */
-static int register_acpi_bus_type(struct acpi_bus_type *bus) { return 0; }
-static int unregister_acpi_bus_type(struct acpi_bus_type *bus) { return 0; }
+static inline int register_acpi_bus_type(void *bus) { return 0; }
+static inline int unregister_acpi_bus_type(void *bus) { return 0; }
#endif /* CONFIG_ACPI */
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
acpi_status
acpi_os_hotplug_execute(acpi_osd_exec_callback function, void *context);
-void acpi_os_wait_events_complete(void *context);
+void acpi_os_wait_events_complete(void);
void acpi_os_sleep(u64 milliseconds);
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
/* Current ACPICA subsystem version in YYYYMMDD format */
-#define ACPI_CA_VERSION 0x20120320
+#define ACPI_CA_VERSION 0x20120711
#include "acconfig.h"
#include "actypes.h"
void acpi_free(void *address);
/*
- * ACPI table manipulation interfaces
+ * ACPI table load/unload interfaces
*/
-acpi_status acpi_reallocate_root_table(void);
+acpi_status acpi_load_table(struct acpi_table_header *table);
-acpi_status acpi_find_root_pointer(acpi_size *rsdp_address);
+acpi_status acpi_unload_parent_table(acpi_handle object);
acpi_status acpi_load_tables(void);
-acpi_status acpi_load_table(struct acpi_table_header *table_ptr);
+/*
+ * ACPI table manipulation interfaces
+ */
+acpi_status acpi_reallocate_root_table(void);
+
+acpi_status acpi_find_root_pointer(acpi_size *rsdp_address);
acpi_status acpi_unload_table_id(acpi_owner_id id);
acpi_info(const char *module_name,
u32 line_number, const char *format, ...) ACPI_PRINTF_LIKE(3);
+void ACPI_INTERNAL_VAR_XFACE
+acpi_bios_error(const char *module_name,
+ u32 line_number, const char *format, ...) ACPI_PRINTF_LIKE(3);
+
+void ACPI_INTERNAL_VAR_XFACE
+acpi_bios_warning(const char *module_name,
+ u32 line_number, const char *format, ...) ACPI_PRINTF_LIKE(3);
+
/*
* Debug output
*/
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* Definitions for Resource Attributes
*/
typedef u16 acpi_rs_length; /* Resource Length field is fixed at 16 bits */
-typedef u32 acpi_rsdesc_size; /* Max Resource Descriptor size is (Length+3) = (64_k-1)+3 */
+typedef u32 acpi_rsdesc_size; /* Max Resource Descriptor size is (Length+3) = (64K-1)+3 */
/*
* Memory Attributes
};
struct acpi_resource_extended_address64 {
- ACPI_RESOURCE_ADDRESS_COMMON u8 revision_iD;
+ ACPI_RESOURCE_ADDRESS_COMMON u8 revision_ID;
u64 granularity;
u64 minimum;
u64 maximum;
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
u32 smi_command; /* 32-bit Port address of SMI command port */
u8 acpi_enable; /* Value to write to smi_cmd to enable ACPI */
u8 acpi_disable; /* Value to write to smi_cmd to disable ACPI */
- u8 S4bios_request; /* Value to write to SMI CMD to enter S4BIOS state */
+ u8 s4_bios_request; /* Value to write to SMI CMD to enter S4BIOS state */
u8 pstate_control; /* Processor performance state control */
u32 pm1a_event_block; /* 32-bit Port address of Power Mgt 1a Event Reg Blk */
u32 pm1b_event_block; /* 32-bit Port address of Power Mgt 1b Event Reg Blk */
u8 gpe1_block_length; /* Byte Length of ports at gpe1_block */
u8 gpe1_base; /* Offset in GPE number space where GPE1 events start */
u8 cst_control; /* Support for the _CST object and C States change notification */
- u16 C2latency; /* Worst case HW latency to enter/exit C2 state */
- u16 C3latency; /* Worst case HW latency to enter/exit C3 state */
+ u16 c2_latency; /* Worst case HW latency to enter/exit C2 state */
+ u16 c3_latency; /* Worst case HW latency to enter/exit C3 state */
u16 flush_size; /* Processor's memory cache line width, in bytes */
u16 flush_stride; /* Number of flush strides that need to be read */
u8 duty_offset; /* Processor duty cycle index in processor's P_CNT reg */
#define ACPI_FADT_S4_RTC_VALID (1<<16) /* 16: [V4] Contents of RTC_STS valid after S4 wake (ACPI 3.0) */
#define ACPI_FADT_REMOTE_POWER_ON (1<<17) /* 17: [V4] System is compatible with remote power on (ACPI 3.0) */
#define ACPI_FADT_APIC_CLUSTER (1<<18) /* 18: [V4] All local APICs must use cluster model (ACPI 3.0) */
-#define ACPI_FADT_APIC_PHYSICAL (1<<19) /* 19: [V4] All local x_aPICs must use physical dest mode (ACPI 3.0) */
+#define ACPI_FADT_APIC_PHYSICAL (1<<19) /* 19: [V4] All local xAPICs must use physical dest mode (ACPI 3.0) */
#define ACPI_FADT_HW_REDUCED (1<<20) /* 20: [V5] ACPI hardware is not implemented (ACPI 5.0) */
#define ACPI_FADT_LOW_POWER_S0 (1<<21) /* 21: [V5] S0 power savings are equal or better than S3 (ACPI 5.0) */
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
struct acpi_madt_io_apic {
struct acpi_subtable_header header;
u8 id; /* I/O APIC ID */
- u8 reserved; /* Reserved - must be zero */
+ u8 reserved; /* reserved - must be zero */
u32 address; /* APIC physical address */
u32 global_irq_base; /* Global system interrupt where INTI lines start */
};
struct acpi_madt_generic_distributor {
struct acpi_subtable_header header;
- u16 reserved; /* Reserved - must be zero */
+ u16 reserved; /* reserved - must be zero */
u32 gic_id;
u64 base_address;
u32 global_irq_base;
- u32 reserved2; /* Reserved - must be zero */
+ u32 reserved2; /* reserved - must be zero */
};
/*
u64 max_address; /* Max physical address in system */
};
-/* Subtable - Maximum Proximity Domain Information. Version 1 */
+/* subtable - Maximum Proximity Domain Information. Version 1 */
struct acpi_msct_proximity {
u8 revision;
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
#define ACPI_SIG_DBGP "DBGP" /* Debug Port table */
#define ACPI_SIG_DMAR "DMAR" /* DMA Remapping table */
#define ACPI_SIG_HPET "HPET" /* High Precision Event Timer table */
-#define ACPI_SIG_IBFT "IBFT" /* i_sCSI Boot Firmware Table */
+#define ACPI_SIG_IBFT "IBFT" /* iSCSI Boot Firmware Table */
#define ACPI_SIG_IVRS "IVRS" /* I/O Virtualization Reporting Structure */
#define ACPI_SIG_MCFG "MCFG" /* PCI Memory Mapped Configuration table */
#define ACPI_SIG_MCHI "MCHI" /* Management Controller Host Interface table */
struct acpi_dmar_header header;
u16 reserved;
u16 segment;
- u64 base_address; /* 4_k aligned base address */
- u64 end_address; /* 4_k aligned limit address */
+ u64 base_address; /* 4K aligned base address */
+ u64 end_address; /* 4K aligned limit address */
};
/* Masks for Flags field above */
/* Masks for Info field above */
#define ACPI_IVHD_MSI_NUMBER_MASK 0x001F /* 5 bits, MSI message number */
-#define ACPI_IVHD_UNIT_ID_MASK 0x1F00 /* 5 bits, unit_iD */
+#define ACPI_IVHD_UNIT_ID_MASK 0x1F00 /* 5 bits, unit_ID */
/*
* Device Entries for IVHD subtable, appear after struct acpi_ivrs_hardware structure.
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* to indicate that special precautions must be taken to avoid alignment faults.
* (IA64 or ia64 is currently used by existing compilers to indicate IPF.)
*
- * Note: Em64_t and other X86-64 processors support misaligned transfers,
+ * Note: EM64T and other X86-64 processors support misaligned transfers,
* so there is no need to define this flag.
*/
#if defined (__IA64__) || defined (__ia64__)
#define ACPI_NUM_FIXED_EVENTS ACPI_EVENT_MAX + 1
/*
- * Event Status - Per event
+ * Event status - Per event
* -------------
* The encoding of acpi_event_status is illustrated below.
* Note that a set bit (1) indicates the property is TRUE
#define ACPI_DEVICE_NOTIFY 0x2
#define ACPI_ALL_NOTIFY (ACPI_SYSTEM_NOTIFY | ACPI_DEVICE_NOTIFY)
#define ACPI_MAX_NOTIFY_HANDLER_TYPE 0x3
+#define ACPI_NUM_NOTIFY_TYPES 2
#define ACPI_MAX_SYS_NOTIFY 0x7F
#define ACPI_MAX_DEVICE_SPECIFIC_NOTIFY 0xBF
+#define ACPI_SYSTEM_HANDLER_LIST 0 /* Used as index, must be SYSTEM_NOTIFY -1 */
+#define ACPI_DEVICE_HANDLER_LIST 1 /* Used as index, must be DEVICE_NOTIFY -1 */
+
/* Address Space (Operation Region) Types */
typedef u8 acpi_adr_space_type;
#define ACPI_ADR_SPACE_IPMI (acpi_adr_space_type) 7
#define ACPI_ADR_SPACE_GPIO (acpi_adr_space_type) 8
#define ACPI_ADR_SPACE_GSBUS (acpi_adr_space_type) 9
+#define ACPI_ADR_SPACE_PLATFORM_COMM (acpi_adr_space_type) 10
-#define ACPI_NUM_PREDEFINED_REGIONS 10
+#define ACPI_NUM_PREDEFINED_REGIONS 11
/*
* Special Address Spaces
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
#include <linux/compiler.h>
+#ifdef CONFIG_GENERIC_BUG
+#define BUGFLAG_WARNING (1 << 0)
+#define BUGFLAG_TAINT(taint) (BUGFLAG_WARNING | ((taint) << 8))
+#define BUG_GET_TAINT(bug) ((bug)->flags >> 8)
+#endif
+
+#ifndef __ASSEMBLY__
+#include <linux/kernel.h>
+
#ifdef CONFIG_BUG
#ifdef CONFIG_GENERIC_BUG
-#ifndef __ASSEMBLY__
struct bug_entry {
#ifndef CONFIG_GENERIC_BUG_RELATIVE_POINTERS
unsigned long bug_addr;
#endif
unsigned short flags;
};
-#endif /* __ASSEMBLY__ */
-
-#define BUGFLAG_WARNING (1 << 0)
-#define BUGFLAG_TAINT(taint) (BUGFLAG_WARNING | ((taint) << 8))
-#define BUG_GET_TAINT(bug) ((bug)->flags >> 8)
-
#endif /* CONFIG_GENERIC_BUG */
/*
* to provide better diagnostics.
*/
#ifndef __WARN_TAINT
-#ifndef __ASSEMBLY__
extern __printf(3, 4)
void warn_slowpath_fmt(const char *file, const int line,
const char *fmt, ...);
const char *fmt, ...);
extern void warn_slowpath_null(const char *file, const int line);
#define WANT_WARN_ON_SLOWPATH
-#endif
#define __WARN() warn_slowpath_null(__FILE__, __LINE__)
#define __WARN_printf(arg...) warn_slowpath_fmt(__FILE__, __LINE__, arg)
#define __WARN_printf_taint(taint, arg...) \
# define WARN_ON_SMP(x) ({0;})
#endif
+#endif /* __ASSEMBLY__ */
+
#endif
{
if (dev)
dev->cma_area = cma;
- if (!dev || !dma_contiguous_default_area)
+ if (!dev && !dma_contiguous_default_area)
dma_contiguous_default_area = cma;
}
/*
* The barrier will stabilize the pmdval in a register or on
* the stack so that it will stop changing under the code.
+ *
+ * When CONFIG_TRANSPARENT_HUGEPAGE=y on x86 32bit PAE,
+ * pmd_read_atomic is allowed to return a not atomic pmdval
+ * (for example pointing to an hugepage that has never been
+ * mapped in the pmd). The below checks will only care about
+ * the low part of the pmd with 32bit PAE x86 anyway, with the
+ * exception of pmd_none(). So the important thing is that if
+ * the low part of the pmd is found null, the high part will
+ * be also null or the pmd_none() check below would be
+ * confused.
*/
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
barrier();
struct drm_object_properties *properties;
};
-#define DRM_OBJECT_MAX_PROPERTY 16
+#define DRM_OBJECT_MAX_PROPERTY 24
struct drm_object_properties {
int count;
uint32_t ids[DRM_OBJECT_MAX_PROPERTY];
-/*
- This file is auto-generated from the drm_pciids.txt in the DRM CVS
- Please contact dri-devel@lists.sf.net to add new cards to this list
-*/
#define radeon_PCI_IDS \
{0x1002, 0x3150, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \
{0x1002, 0x3151, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6747, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6748, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6749, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x674A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6750, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6751, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6758, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6767, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6768, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6770, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x6771, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6772, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6778, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6779, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6827, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6829, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x682B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x682D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x682F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
- {0x1002, 0x6830, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_NEW_MEMMAP}, \
- {0x1002, 0x6831, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x6830, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x6831, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6837, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6838, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6839, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_NEW_MEMMAP}, \
{0x1002, 0x9645, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO2|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9647, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP},\
{0x1002, 0x9648, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP},\
+ {0x1002, 0x9649, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP},\
{0x1002, 0x964a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x964b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x964c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9807, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9808, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9809, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x980A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9900, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9901, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9903, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9909, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x990A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x990F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9910, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9913, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9917, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9918, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9919, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9990, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9991, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9992, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9993, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9994, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x99A0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x99A2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x99A4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0, 0, 0}
#define r128_PCI_IDS \
* A structure for mapping buffer.
*
* @handle: a handle to gem object created.
+ * @pad: just padding to be 64-bit aligned.
* @size: memory size to be mapped.
* @mapped: having user virtual address mmaped.
* - this variable would be filled by exynos gem module
*/
struct drm_exynos_gem_mmap {
unsigned int handle;
- unsigned int size;
+ unsigned int pad;
+ uint64_t size;
uint64_t mapped;
};
(x)->ki_dtor = NULL; \
(x)->ki_obj.tsk = tsk; \
(x)->ki_user_data = 0; \
+ (x)->private = NULL; \
} while (0)
#define AIO_RING_MAGIC 0xa10a10a1
extern void blk_complete_request(struct request *);
extern void __blk_complete_request(struct request *);
extern void blk_abort_request(struct request *);
-extern void blk_abort_queue(struct request_queue *);
extern void blk_unprep_request(struct request *);
/*
unsigned long size,
unsigned long align,
unsigned long goal);
+void *___alloc_bootmem_node_nopanic(pg_data_t *pgdat,
+ unsigned long size,
+ unsigned long align,
+ unsigned long goal,
+ unsigned long limit);
extern void *__alloc_bootmem_low(unsigned long size,
unsigned long align,
unsigned long goal);
#define CAP_WAKE_ALARM 35
-/* Allow preventing system suspends while epoll events are pending */
+/* Allow preventing system suspends */
-#define CAP_EPOLLWAKEUP 36
+#define CAP_BLOCK_SUSPEND 36
-#define CAP_LAST_CAP CAP_EPOLLWAKEUP
+#define CAP_LAST_CAP CAP_BLOCK_SUSPEND
#define cap_valid(x) ((x) >= 0 && (x) <= CAP_LAST_CAP)
/* connection negotiation temps */
char in_banner[CEPH_BANNER_MAX_LEN];
- union {
- struct { /* outgoing connection */
- struct ceph_msg_connect out_connect;
- struct ceph_msg_connect_reply in_reply;
- };
- struct { /* incoming */
- struct ceph_msg_connect in_connect;
- struct ceph_msg_connect_reply out_reply;
- };
- };
+ struct ceph_msg_connect out_connect;
+ struct ceph_msg_connect_reply in_reply;
struct ceph_entity_addr actual_peer_addr;
/* message out temps */
struct clock_event_device *evt);
extern void clockevents_register_device(struct clock_event_device *dev);
+extern void clockevents_config(struct clock_event_device *dev, u32 freq);
extern void clockevents_config_and_register(struct clock_event_device *dev,
u32 freq, unsigned long min_delta,
unsigned long max_delta);
#ifndef _LINUX_COMPACTION_H
#define _LINUX_COMPACTION_H
-#include <linux/node.h>
-
/* Return values for compact_zone() and try_to_compact_pages() */
/* compaction didn't start as it was not possible or direct reclaim was more suitable */
#define COMPACT_SKIPPED 0
/* The full zone was compacted */
#define COMPACT_COMPLETE 3
-/*
- * compaction supports three modes
- *
- * COMPACT_ASYNC_MOVABLE uses asynchronous migration and only scans
- * MIGRATE_MOVABLE pageblocks as migration sources and targets.
- * COMPACT_ASYNC_UNMOVABLE uses asynchronous migration and only scans
- * MIGRATE_MOVABLE pageblocks as migration sources.
- * MIGRATE_UNMOVABLE pageblocks are scanned as potential migration
- * targets and convers them to MIGRATE_MOVABLE if possible
- * COMPACT_SYNC uses synchronous migration and scans all pageblocks
- */
-enum compact_mode {
- COMPACT_ASYNC_MOVABLE,
- COMPACT_ASYNC_UNMOVABLE,
- COMPACT_SYNC,
-};
-
#ifdef CONFIG_COMPACTION
extern int sysctl_compact_memory;
extern int sysctl_compaction_handler(struct ctl_table *table, int write,
*/
#if !defined(CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING) || \
!defined(CONFIG_OPTIMIZE_INLINING) || (__GNUC__ < 4)
-# define inline inline __attribute__((always_inline))
-# define __inline__ __inline__ __attribute__((always_inline))
-# define __inline __inline __attribute__((always_inline))
+# define inline inline __attribute__((always_inline)) notrace
+# define __inline__ __inline__ __attribute__((always_inline)) notrace
+# define __inline __inline __attribute__((always_inline)) notrace
#else
/* A lot of inline functions can cause havoc with function tracing */
# define inline inline notrace
/* Idle State Flags */
#define CPUIDLE_FLAG_TIME_VALID (0x01) /* is residency time measurable? */
+#define CPUIDLE_FLAG_COUPLED (0x02) /* state applies to multiple cpus */
#define CPUIDLE_DRIVER_FLAGS_MASK (0xFFFF0000)
struct list_head device_list;
struct kobject kobj;
struct completion kobj_unregister;
+
+#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
+ int safe_state_index;
+ cpumask_t coupled_cpus;
+ struct cpuidle_coupled *coupled;
+#endif
};
DECLARE_PER_CPU(struct cpuidle_device *, cpuidle_devices);
#endif
+#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
+void cpuidle_coupled_parallel_barrier(struct cpuidle_device *dev, atomic_t *a);
+#endif
+
/******************************
* CPUIDLE GOVERNOR INTERFACE *
******************************/
extern struct device *get_device(struct device *dev);
extern void put_device(struct device *dev);
-extern void wait_for_device_probe(void);
-
#ifdef CONFIG_DEVTMPFS
extern int devtmpfs_create_node(struct device *dev);
extern int devtmpfs_delete_node(struct device *dev);
* re-allowed until epoll_wait is called again after consuming the wakeup
* event(s).
*
- * Requires CAP_EPOLLWAKEUP
+ * Requires CAP_BLOCK_SUSPEND
*/
#define EPOLLWAKEUP (1 << 29)
--- /dev/null
+#ifndef _LINUX_FRONTSWAP_H
+#define _LINUX_FRONTSWAP_H
+
+#include <linux/swap.h>
+#include <linux/mm.h>
+#include <linux/bitops.h>
+
+struct frontswap_ops {
+ void (*init)(unsigned);
+ int (*store)(unsigned, pgoff_t, struct page *);
+ int (*load)(unsigned, pgoff_t, struct page *);
+ void (*invalidate_page)(unsigned, pgoff_t);
+ void (*invalidate_area)(unsigned);
+};
+
+extern bool frontswap_enabled;
+extern struct frontswap_ops
+ frontswap_register_ops(struct frontswap_ops *ops);
+extern void frontswap_shrink(unsigned long);
+extern unsigned long frontswap_curr_pages(void);
+extern void frontswap_writethrough(bool);
+
+extern void __frontswap_init(unsigned type);
+extern int __frontswap_store(struct page *page);
+extern int __frontswap_load(struct page *page);
+extern void __frontswap_invalidate_page(unsigned, pgoff_t);
+extern void __frontswap_invalidate_area(unsigned);
+
+#ifdef CONFIG_FRONTSWAP
+
+static inline bool frontswap_test(struct swap_info_struct *sis, pgoff_t offset)
+{
+ bool ret = false;
+
+ if (frontswap_enabled && sis->frontswap_map)
+ ret = test_bit(offset, sis->frontswap_map);
+ return ret;
+}
+
+static inline void frontswap_set(struct swap_info_struct *sis, pgoff_t offset)
+{
+ if (frontswap_enabled && sis->frontswap_map)
+ set_bit(offset, sis->frontswap_map);
+}
+
+static inline void frontswap_clear(struct swap_info_struct *sis, pgoff_t offset)
+{
+ if (frontswap_enabled && sis->frontswap_map)
+ clear_bit(offset, sis->frontswap_map);
+}
+
+static inline void frontswap_map_set(struct swap_info_struct *p,
+ unsigned long *map)
+{
+ p->frontswap_map = map;
+}
+
+static inline unsigned long *frontswap_map_get(struct swap_info_struct *p)
+{
+ return p->frontswap_map;
+}
+#else
+/* all inline routines become no-ops and all externs are ignored */
+
+#define frontswap_enabled (0)
+
+static inline bool frontswap_test(struct swap_info_struct *sis, pgoff_t offset)
+{
+ return false;
+}
+
+static inline void frontswap_set(struct swap_info_struct *sis, pgoff_t offset)
+{
+}
+
+static inline void frontswap_clear(struct swap_info_struct *sis, pgoff_t offset)
+{
+}
+
+static inline void frontswap_map_set(struct swap_info_struct *p,
+ unsigned long *map)
+{
+}
+
+static inline unsigned long *frontswap_map_get(struct swap_info_struct *p)
+{
+ return NULL;
+}
+#endif
+
+static inline int frontswap_store(struct page *page)
+{
+ int ret = -1;
+
+ if (frontswap_enabled)
+ ret = __frontswap_store(page);
+ return ret;
+}
+
+static inline int frontswap_load(struct page *page)
+{
+ int ret = -1;
+
+ if (frontswap_enabled)
+ ret = __frontswap_load(page);
+ return ret;
+}
+
+static inline void frontswap_invalidate_page(unsigned type, pgoff_t offset)
+{
+ if (frontswap_enabled)
+ __frontswap_invalidate_page(type, offset);
+}
+
+static inline void frontswap_invalidate_area(unsigned type)
+{
+ if (frontswap_enabled)
+ __frontswap_invalidate_area(type);
+}
+
+static inline void frontswap_init(unsigned type)
+{
+ if (frontswap_enabled)
+ __frontswap_init(type);
+}
+
+#endif /* _LINUX_FRONTSWAP_H */
unsigned int __i_nlink;
};
dev_t i_rdev;
+ loff_t i_size;
struct timespec i_atime;
struct timespec i_mtime;
struct timespec i_ctime;
spinlock_t i_lock; /* i_blocks, i_bytes, maybe i_size */
unsigned short i_bytes;
+ unsigned int i_blkbits;
blkcnt_t i_blocks;
- loff_t i_size;
#ifdef __NEED_I_SIZE_ORDERED
seqcount_t i_size_seqcount;
struct list_head i_dentry;
struct rcu_head i_rcu;
};
- atomic_t i_count;
- unsigned int i_blkbits;
u64 i_version;
+ atomic_t i_count;
atomic_t i_dio_count;
atomic_t i_writecount;
const struct file_operations *i_fop; /* former ->i_op->default_file_ops */
* 7.18
* - add FUSE_IOCTL_DIR flag
* - add FUSE_NOTIFY_DELETE
+ *
+ * 7.19
+ * - add FUSE_FALLOCATE
*/
#ifndef _LINUX_FUSE_H
#define FUSE_KERNEL_VERSION 7
/** Minor version number of this interface */
-#define FUSE_KERNEL_MINOR_VERSION 18
+#define FUSE_KERNEL_MINOR_VERSION 19
/** The node ID of the root inode */
#define FUSE_ROOT_ID 1
FUSE_POLL = 40,
FUSE_NOTIFY_REPLY = 41,
FUSE_BATCH_FORGET = 42,
+ FUSE_FALLOCATE = 43,
/* CUSE specific operations */
CUSE_INIT = 4096,
__u64 kh;
};
+struct fuse_fallocate_in {
+ __u64 fh;
+ __u64 offset;
+ __u64 length;
+ __u32 mode;
+ __u32 padding;
+};
+
struct fuse_in_header {
__u32 len;
__u32 opcode;
/* Gpio pin is open source */
#define GPIOF_OPEN_SOURCE (1 << 3)
-#define GPIOF_EXPORT (1 << 2)
-#define GPIOF_EXPORT_CHANGEABLE (1 << 3)
+#define GPIOF_EXPORT (1 << 4)
+#define GPIOF_EXPORT_CHANGEABLE (1 << 5)
#define GPIOF_EXPORT_DIR_FIXED (GPIOF_EXPORT)
#define GPIOF_EXPORT_DIR_CHANGEABLE (GPIOF_EXPORT | GPIOF_EXPORT_CHANGEABLE)
* @lock: lock protecting the base and associated clock bases
* and timers
* @active_bases: Bitfield to mark bases with active timers
+ * @clock_was_set: Indicates that clock was set from irq context.
* @expires_next: absolute time of the next event which was scheduled
* via clock_set_next_event()
* @hres_active: State of high resolution mode
*/
struct hrtimer_cpu_base {
raw_spinlock_t lock;
- unsigned long active_bases;
+ unsigned int active_bases;
+ unsigned int clock_was_set;
#ifdef CONFIG_HIGH_RES_TIMERS
ktime_t expires_next;
int hres_active;
# define MONOTONIC_RES_NSEC HIGH_RES_NSEC
# define KTIME_MONOTONIC_RES KTIME_HIGH_RES
+extern void clock_was_set_delayed(void);
+
#else
# define MONOTONIC_RES_NSEC LOW_RES_NSEC
{
return 0;
}
+
+static inline void clock_was_set_delayed(void) { }
+
#endif
extern void clock_was_set(void);
extern ktime_t ktime_get_real(void);
extern ktime_t ktime_get_boottime(void);
extern ktime_t ktime_get_monotonic_offset(void);
+extern ktime_t ktime_get_update_offsets(ktime_t *offs_real, ktime_t *offs_boot);
DECLARE_PER_CPU(struct tick_device, tick_cpu_device);
--- /dev/null
+/*
+ * i2c-mux-pinctrl platform data
+ *
+ * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _LINUX_I2C_MUX_PINCTRL_H
+#define _LINUX_I2C_MUX_PINCTRL_H
+
+/**
+ * struct i2c_mux_pinctrl_platform_data - Platform data for i2c-mux-pinctrl
+ * @parent_bus_num: Parent I2C bus number
+ * @base_bus_num: Base I2C bus number for the child busses. 0 for dynamic.
+ * @bus_count: Number of child busses. Also the number of elements in
+ * @pinctrl_states
+ * @pinctrl_states: The names of the pinctrl state to select for each child bus
+ * @pinctrl_state_idle: The pinctrl state to select when no child bus is being
+ * accessed. If NULL, the most recently used pinctrl state will be left
+ * selected.
+ */
+struct i2c_mux_pinctrl_platform_data {
+ int parent_bus_num;
+ int base_bus_num;
+ int bus_count;
+ const char **pinctrl_states;
+ const char *pinctrl_state_idle;
+};
+
+#endif
.normal_prio = MAX_PRIO-20, \
.policy = SCHED_NORMAL, \
.cpus_allowed = CPU_MASK_ALL, \
+ .nr_cpus_allowed= NR_CPUS, \
.mm = NULL, \
.active_mm = &init_mm, \
.se = { \
.rt = { \
.run_list = LIST_HEAD_INIT(tsk.rt.run_list), \
.time_slice = RR_TIMESLICE, \
- .nr_cpus_allowed = NR_CPUS, \
}, \
.tasks = LIST_HEAD_INIT(tsk.tasks), \
INIT_PUSHABLE_TASKS(tsk) \
/**
* EVIOCGMTSLOTS(len) - get MT slot values
+ * @len: size of the data buffer in bytes
*
* The ioctl buffer argument should be binary equivalent to
*
* @irq_pm_shutdown: function called from core code on shutdown once per chip
* @irq_print_chip: optional to print special chip info in show_interrupts
* @flags: chip specific flags
- *
- * @release: release function solely used by UML
*/
struct irq_chip {
const char *name;
SYSTEM_HALT,
SYSTEM_POWER_OFF,
SYSTEM_RESTART,
- SYSTEM_SUSPEND_DISK,
} system_state;
#define TAINT_PROPRIETARY_MODULE 0
* is passed to the kernel.
*/
enum kmsg_dump_reason {
+ KMSG_DUMP_UNDEF,
KMSG_DUMP_PANIC,
KMSG_DUMP_OOPS,
KMSG_DUMP_EMERG,
/**
* struct kmsg_dumper - kernel crash message dumper structure
- * @dump: The callback which gets called on crashes. The buffer is passed
- * as two sections, where s1 (length l1) contains the older
- * messages and s2 (length l2) contains the newer.
* @list: Entry in the dumper list (private)
+ * @dump: Call into dumping code which will retrieve the data with
+ * through the record iterator
+ * @max_reason: filter for highest reason number that should be dumped
* @registered: Flag that specifies if this is already registered
*/
struct kmsg_dumper {
- void (*dump)(struct kmsg_dumper *dumper, enum kmsg_dump_reason reason,
- const char *s1, unsigned long l1,
- const char *s2, unsigned long l2);
struct list_head list;
- int registered;
+ void (*dump)(struct kmsg_dumper *dumper, enum kmsg_dump_reason reason);
+ enum kmsg_dump_reason max_reason;
+ bool active;
+ bool registered;
+
+ /* private state of the kmsg iterator */
+ u32 cur_idx;
+ u32 next_idx;
+ u64 cur_seq;
+ u64 next_seq;
};
#ifdef CONFIG_PRINTK
void kmsg_dump(enum kmsg_dump_reason reason);
+bool kmsg_dump_get_line_nolock(struct kmsg_dumper *dumper, bool syslog,
+ char *line, size_t size, size_t *len);
+
+bool kmsg_dump_get_line(struct kmsg_dumper *dumper, bool syslog,
+ char *line, size_t size, size_t *len);
+
+bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog,
+ char *buf, size_t size, size_t *len);
+
+void kmsg_dump_rewind_nolock(struct kmsg_dumper *dumper);
+
+void kmsg_dump_rewind(struct kmsg_dumper *dumper);
+
int kmsg_dump_register(struct kmsg_dumper *dumper);
int kmsg_dump_unregister(struct kmsg_dumper *dumper);
{
}
+static inline bool kmsg_dump_get_line_nolock(struct kmsg_dumper *dumper,
+ bool syslog, const char *line,
+ size_t size, size_t *len)
+{
+ return false;
+}
+
+static inline bool kmsg_dump_get_line(struct kmsg_dumper *dumper, bool syslog,
+ const char *line, size_t size, size_t *len)
+{
+ return false;
+}
+
+static inline bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog,
+ char *buf, size_t size, size_t *len)
+{
+ return false;
+}
+
+static inline void kmsg_dump_rewind_nolock(struct kmsg_dumper *dumper)
+{
+}
+
+static inline void kmsg_dump_rewind(struct kmsg_dumper *dumper)
+{
+}
+
static inline int kmsg_dump_register(struct kmsg_dumper *dumper)
{
return -EINVAL;
#ifdef CONFIG_HAVE_KVM_EVENTFD
void kvm_eventfd_init(struct kvm *kvm);
-int kvm_irqfd(struct kvm *kvm, int fd, int gsi, int flags);
+int kvm_irqfd(struct kvm *kvm, struct kvm_irqfd *args);
void kvm_irqfd_release(struct kvm *kvm);
void kvm_irq_routing_update(struct kvm *, struct kvm_irq_routing_table *);
int kvm_ioeventfd(struct kvm *kvm, struct kvm_ioeventfd *args);
static inline void kvm_eventfd_init(struct kvm *kvm) {}
-static inline int kvm_irqfd(struct kvm *kvm, int fd, int gsi, int flags)
+static inline int kvm_irqfd(struct kvm *kvm, struct kvm_irqfd *args)
{
return -EINVAL;
}
phys_addr_t size, phys_addr_t align, int nid);
phys_addr_t memblock_find_in_range(phys_addr_t start, phys_addr_t end,
phys_addr_t size, phys_addr_t align);
-int memblock_free_reserved_regions(void);
-int memblock_reserve_reserved_regions(void);
-
+phys_addr_t get_allocated_memblock_reserved_regions_info(phys_addr_t *addr);
void memblock_allow_resize(void);
int memblock_add_node(phys_addr_t base, phys_addr_t size, int nid);
int memblock_add(phys_addr_t base, phys_addr_t size);
};
union {
+#if defined(CONFIG_HAVE_CMPXCHG_DOUBLE) && \
+ defined(CONFIG_HAVE_ALIGNED_STRUCT_PAGE)
/* Used for cmpxchg_double in slub */
unsigned long counters;
+#else
+ /*
+ * Keep _count separate from slub cmpxchg_double data.
+ * As the rest of the double word is protected by
+ * slab_lock but _count is not.
+ */
+ unsigned counters;
+#endif
struct {
* SDHCI declarations specific to ST SPEAr platform
*
* Copyright (C) 2010 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
#define SDIO_CCCR_IF 0x07 /* bus interface controls */
+#define SDIO_BUS_WIDTH_MASK 0x03 /* data bus width setting */
#define SDIO_BUS_WIDTH_1BIT 0x00
+#define SDIO_BUS_WIDTH_RESERVED 0x01
#define SDIO_BUS_WIDTH_4BIT 0x02
#define SDIO_BUS_ECSI 0x20 /* Enable continuous SPI interrupt */
#define SDIO_BUS_SCSI 0x40 /* Support continuous SPI interrupt */
range, including holes */
int node_id;
wait_queue_head_t kswapd_wait;
- struct task_struct *kswapd;
+ struct task_struct *kswapd; /* Protected by lock_memory_hotplug() */
int kswapd_max_order;
enum zone_type classzone_idx;
} pg_data_t;
* The ops can have NULL set or get functions.
*/
#define module_param_cb(name, ops, arg, perm) \
- __module_param_call(MODULE_PARAM_PREFIX, name, ops, arg, perm, 0)
+ __module_param_call(MODULE_PARAM_PREFIX, name, ops, arg, perm, -1)
/**
* <level>_param_cb - general callback for a module/cmdline parameter
{ (void *)set, (void *)get }; \
__module_param_call(MODULE_PARAM_PREFIX, \
name, &__param_ops_##name, arg, \
- (perm) + sizeof(__check_old_set_param(set))*0, 0)
+ (perm) + sizeof(__check_old_set_param(set))*0, -1)
/* We don't get oldget: it's often a new-style param_get_uint, etc. */
static inline int
*/
#define core_param(name, var, type, perm) \
param_check_##type(name, &(var)); \
- __module_param_call("", name, ¶m_ops_##type, &var, perm, 0)
+ __module_param_call("", name, ¶m_ops_##type, &var, perm, -1)
#endif /* !MODULE */
/**
= { len, string }; \
__module_param_call(MODULE_PARAM_PREFIX, name, \
¶m_ops_string, \
- .str = &__param_string_##name, perm, 0); \
+ .str = &__param_string_##name, perm, -1); \
__MODULE_PARM_TYPE(name, "string")
/**
__module_param_call(MODULE_PARAM_PREFIX, name, \
¶m_array_ops, \
.arr = &__param_arr_##name, \
- perm, 0); \
+ perm, -1); \
__MODULE_PARM_TYPE(name, "array of " #type)
extern struct kernel_param_ops param_array_ops;
__u16 src;
__u16 dst;
} p16;
+ struct {
+ __be16 src;
+ __be16 dst;
+ } b16;
__u32 v32;
+ __be32 b32;
};
struct xt_hmark_info {
*/
struct nfs_client {
atomic_t cl_count;
+ atomic_t cl_mds_count;
int cl_cons_state; /* current construction state (-ve: init error) */
#define NFS_CS_READY 0 /* ready to be used */
#define NFS_CS_INITING 1 /* busy initialising */
const struct qstr * name;
const struct nfs_server *server; /* Needed for ID mapping */
const u32 * bitmask;
+ const u32 * open_bitmap;
__u32 claim;
struct nfs4_sequence_args seq_args;
};
struct list_head rpc_list;
atomic_t refcnt;
struct nfs_page *req;
+ struct nfs_writeverf *verf;
struct pnfs_layout_segment *lseg;
loff_t io_start;
const struct rpc_call_ops *mds_ops;
struct nfs_write_header {
struct nfs_pgio_header header;
struct nfs_write_data rpc_data;
+ struct nfs_writeverf verf;
};
struct nfs_mds_commit_info {
* Arasan Compact Flash host controller platform data header file
*
* Copyright (C) 2011 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
PERF_RECORD_MAX, /* non-ABI */
};
+#define PERF_MAX_STACK_DEPTH 127
+
enum perf_callchain_context {
PERF_CONTEXT_HV = (__u64)-32,
PERF_CONTEXT_KERNEL = (__u64)-128,
#include <linux/sysfs.h>
#include <asm/local.h>
-#define PERF_MAX_STACK_DEPTH 255
-
struct perf_callchain_entry {
__u64 nr;
__u64 ip[PERF_MAX_STACK_DEPTH];
+++ /dev/null
-/*
- * SPEAr thermal driver platform data.
- *
- * Copyright (C) 2011-2012 ST Microelectronics
- * Author: Vincenzo Frascino <vincenzo.frascino@st.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-#ifndef SPEAR_THERMAL_H
-#define SPEAR_THERMAL_H
-
-/* SPEAr Thermal Sensor Platform Data */
-struct spear_thermal_pdata {
- /* flags used to enable thermal sensor */
- unsigned int thermal_flags;
-};
-
-#endif /* SPEAR_THERMAL_H */
#define PR_SET_PTRACER 0x59616d61
# define PR_SET_PTRACER_ANY ((unsigned long)-1)
-#define PR_SET_CHILD_SUBREAPER 36
-#define PR_GET_CHILD_SUBREAPER 37
+#define PR_SET_CHILD_SUBREAPER 36
+#define PR_GET_CHILD_SUBREAPER 37
/*
* If no_new_privs is set, then operations that grant new privileges (i.e.
* Changing LSM security domain is considered a new privilege. So, for example,
* asking selinux for a specific new context (e.g. with runcon) will result
* in execve returning -EPERM.
+ *
+ * See Documentation/prctl/no_new_privs.txt for more details.
*/
-#define PR_SET_NO_NEW_PRIVS 38
-#define PR_GET_NO_NEW_PRIVS 39
+#define PR_SET_NO_NEW_PRIVS 38
+#define PR_GET_NO_NEW_PRIVS 39
+
+#define PR_GET_TID_ADDRESS 40
#endif /* _LINUX_PRCTL_H */
size_t size,
bool ecc);
void persistent_ram_free(struct persistent_ram_zone *prz);
+void persistent_ram_zap(struct persistent_ram_zone *prz);
struct persistent_ram_zone *persistent_ram_init_ringbuffer(struct device *dev,
bool ecc);
int persistent_ram_write(struct persistent_ram_zone *prz, const void *s,
unsigned int count);
+void persistent_ram_save_old(struct persistent_ram_zone *prz);
size_t persistent_ram_old_size(struct persistent_ram_zone *prz);
void *persistent_ram_old(struct persistent_ram_zone *prz);
void persistent_ram_free_old(struct persistent_ram_zone *prz);
PXA25x_SSP, /* pxa 210, 250, 255, 26x */
PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */
PXA27x_SSP,
+ PXA3xx_SSP,
PXA168_SSP,
+ PXA910_SSP,
CE4100_SSP,
};
iter->index++;
if (likely(*slot))
return slot;
- if (flags & RADIX_TREE_ITER_CONTIG)
+ if (flags & RADIX_TREE_ITER_CONTIG) {
+ /* forbid switching to the next chunk */
+ iter->next_index = 0;
break;
+ }
}
}
return NULL;
/* Internal to kernel */
extern void rcu_sched_qs(int cpu);
extern void rcu_bh_qs(int cpu);
-extern void rcu_preempt_note_context_switch(void);
extern void rcu_check_callbacks(int cpu, int user);
struct notifier_block;
extern void rcu_idle_enter(void);
#ifdef CONFIG_TINY_RCU
-static inline int rcu_needs_cpu(int cpu)
+static inline void rcu_preempt_note_context_switch(void)
{
+}
+
+static inline int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies)
+{
+ *delta_jiffies = ULONG_MAX;
return 0;
}
#else /* #ifdef CONFIG_TINY_RCU */
+void rcu_preempt_note_context_switch(void);
int rcu_preempt_needs_cpu(void);
-static inline int rcu_needs_cpu(int cpu)
+static inline int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies)
{
+ *delta_jiffies = ULONG_MAX;
return rcu_preempt_needs_cpu();
}
static inline void rcu_note_context_switch(int cpu)
{
rcu_sched_qs(cpu);
+ rcu_preempt_note_context_switch();
}
/*
extern void rcu_init(void);
extern void rcu_note_context_switch(int cpu);
-extern int rcu_needs_cpu(int cpu);
+extern int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies);
extern void rcu_cpu_stall_reset(void);
/*
#include <linux/types.h>
#include <linux/device.h>
#include <linux/mod_devicetable.h>
+#include <linux/kref.h>
+#include <linux/mutex.h>
/* The feature bitmap for virtio rpmsg */
#define VIRTIO_RPMSG_F_NS 0 /* RP supports name service notifications */
/**
* struct rpmsg_endpoint - binds a local rpmsg address to its user
* @rpdev: rpmsg channel device
+ * @refcount: when this drops to zero, the ept is deallocated
* @cb: rx callback handler
+ * @cb_lock: must be taken before accessing/changing @cb
* @addr: local rpmsg address
* @priv: private data for the driver's use
*
*/
struct rpmsg_endpoint {
struct rpmsg_channel *rpdev;
+ struct kref refcount;
rpmsg_rx_cb_t cb;
+ struct mutex cb_lock;
u32 addr;
void *priv;
};
extern void calc_global_load(unsigned long ticks);
+extern void update_cpu_load_nohz(void);
extern unsigned long get_parent_ip(unsigned long addr);
/* leave room for more dump flags */
#define MMF_VM_MERGEABLE 16 /* KSM may merge identical pages */
#define MMF_VM_HUGEPAGE 17 /* set when VM_HUGEPAGE is set on vma */
+#define MMF_EXE_FILE_CHANGED 18 /* see prctl_set_mm_exe_file() */
#define MMF_INIT_MASK (MMF_DUMPABLE_MASK | MMF_DUMP_FILTER_MASK)
* Number of busy cpus in this group.
*/
atomic_t nr_busy_cpus;
+
+ unsigned long cpumask[0]; /* iteration mask */
};
struct sched_group {
return to_cpumask(sg->cpumask);
}
+/*
+ * cpumask masking which cpus in the group are allowed to iterate up the domain
+ * tree.
+ */
+static inline struct cpumask *sched_group_mask(struct sched_group *sg)
+{
+ return to_cpumask(sg->sgp->cpumask);
+}
+
/**
* group_first_cpu - Returns the first cpu in the cpumask of a sched_group.
* @group: The group whose first cpu is to be returned.
struct list_head run_list;
unsigned long timeout;
unsigned int time_slice;
- int nr_cpus_allowed;
struct sched_rt_entity *back;
#ifdef CONFIG_RT_GROUP_SCHED
#endif
unsigned int policy;
+ int nr_cpus_allowed;
cpumask_t cpus_allowed;
#ifdef CONFIG_PREEMPT_RCU
INIT_LIST_HEAD(&p->rcu_node_entry);
}
-static inline void rcu_switch_from(struct task_struct *prev)
-{
- if (prev->rcu_read_lock_nesting != 0)
- rcu_preempt_note_context_switch();
-}
-
#else
static inline void rcu_copy_process(struct task_struct *p)
{
}
-static inline void rcu_switch_from(struct task_struct *prev)
-{
-}
-
#endif
#ifdef CONFIG_SMP
}
#endif
+#ifdef CONFIG_NO_HZ
+void calc_load_enter_idle(void);
+void calc_load_exit_idle(void);
+#else
+static inline void calc_load_enter_idle(void) { }
+static inline void calc_load_exit_idle(void) { }
+#endif /* CONFIG_NO_HZ */
+
#ifndef CONFIG_CPUMASK_OFFSTACK
static inline int set_cpus_allowed(struct task_struct *p, cpumask_t new_mask)
{
/* device driver is going to provide hardware time stamp */
SKBTX_IN_PROGRESS = 1 << 2,
- /* ensure the originating sk reference is available on driver level */
- SKBTX_DRV_NEEDS_SK_REF = 1 << 3,
-
/* device driver supports TX zero-copy buffers */
- SKBTX_DEV_ZEROCOPY = 1 << 4,
+ SKBTX_DEV_ZEROCOPY = 1 << 3,
/* generate wifi status information (where possible) */
- SKBTX_WIFI_STATUS = 1 << 5,
+ SKBTX_WIFI_STATUS = 1 << 4,
};
/*
void (*cs_control)(u32 command);
};
-#ifdef CONFIG_ARCH_PXA
+#if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP)
#include <linux/clk.h>
#include <mach/dma.h>
struct splice_pipe_desc {
struct page **pages; /* page map */
struct partial_page *partial; /* pages[] may not be contig */
- int nr_pages; /* number of pages in map */
+ int nr_pages; /* number of populated pages in map */
+ unsigned int nr_pages_max; /* pages[] & partial[] arrays size */
unsigned int flags; /* splice flags */
const struct pipe_buf_operations *ops;/* ops associated with output pipe */
void (*spd_release)(struct splice_pipe_desc *, unsigned int);
/*
* for dynamic pipe sizing
*/
-extern int splice_grow_spd(struct pipe_inode_info *, struct splice_pipe_desc *);
-extern void splice_shrink_spd(struct pipe_inode_info *,
- struct splice_pipe_desc *);
+extern int splice_grow_spd(const struct pipe_inode_info *, struct splice_pipe_desc *);
+extern void splice_shrink_spd(struct splice_pipe_desc *);
extern void spd_release_page(struct splice_pipe_desc *, unsigned int);
extern const struct pipe_buf_operations page_cache_pipe_buf_ops;
struct block_device *bdev; /* swap device or bdev of swap file */
struct file *swap_file; /* seldom referenced */
unsigned int old_block_size; /* seldom referenced */
+#ifdef CONFIG_FRONTSWAP
+ unsigned long *frontswap_map; /* frontswap in-use, one bit per page */
+ atomic_t frontswap_pages; /* frontswap pages in-use counter */
+#endif
};
struct swap_list_t {
--- /dev/null
+#ifndef _LINUX_SWAPFILE_H
+#define _LINUX_SWAPFILE_H
+
+/*
+ * these were static in swapfile.c but frontswap.c needs them and we don't
+ * want to expose them to the dozens of source files that include swap.h
+ */
+extern spinlock_t swap_lock;
+extern struct swap_list_t swap_list;
+extern struct swap_info_struct *swap_info[];
+extern int try_to_unuse(unsigned int, bool, unsigned long);
+
+#endif /* _LINUX_SWAPFILE_H */
* get good packing density in that tree, so the index should be dense in
* the low-order bits.
*
- * We arrange the `type' and `offset' fields so that `type' is at the five
+ * We arrange the `type' and `offset' fields so that `type' is at the seven
* high-order bits of the swp_entry_t and `offset' is right-aligned in the
- * remaining bits.
+ * remaining bits. Although `type' itself needs only five bits, we allow for
+ * shmem/tmpfs to shift it all up a further two bits: see swp_to_radix_entry().
*
* swp_entry_t's are *never* stored anywhere in their arch-dependent format.
*/
-#define SWP_TYPE_SHIFT(e) (sizeof(e.val) * 8 - MAX_SWAPFILES_SHIFT)
+#define SWP_TYPE_SHIFT(e) ((sizeof(e.val) * 8) - \
+ (MAX_SWAPFILES_SHIFT + RADIX_TREE_EXCEPTIONAL_SHIFT))
#define SWP_OFFSET_MASK(e) ((1UL << SWP_TYPE_SHIFT(e)) - 1)
/*
#define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3])
enum {
- TCP_FLAG_CWR = __cpu_to_be32(0x00800000),
- TCP_FLAG_ECE = __cpu_to_be32(0x00400000),
- TCP_FLAG_URG = __cpu_to_be32(0x00200000),
- TCP_FLAG_ACK = __cpu_to_be32(0x00100000),
- TCP_FLAG_PSH = __cpu_to_be32(0x00080000),
- TCP_FLAG_RST = __cpu_to_be32(0x00040000),
- TCP_FLAG_SYN = __cpu_to_be32(0x00020000),
- TCP_FLAG_FIN = __cpu_to_be32(0x00010000),
- TCP_RESERVED_BITS = __cpu_to_be32(0x0F000000),
- TCP_DATA_OFFSET = __cpu_to_be32(0xF0000000)
+ TCP_FLAG_CWR = __constant_cpu_to_be32(0x00800000),
+ TCP_FLAG_ECE = __constant_cpu_to_be32(0x00400000),
+ TCP_FLAG_URG = __constant_cpu_to_be32(0x00200000),
+ TCP_FLAG_ACK = __constant_cpu_to_be32(0x00100000),
+ TCP_FLAG_PSH = __constant_cpu_to_be32(0x00080000),
+ TCP_FLAG_RST = __constant_cpu_to_be32(0x00040000),
+ TCP_FLAG_SYN = __constant_cpu_to_be32(0x00020000),
+ TCP_FLAG_FIN = __constant_cpu_to_be32(0x00010000),
+ TCP_RESERVED_BITS = __constant_cpu_to_be32(0x0F000000),
+ TCP_DATA_OFFSET = __constant_cpu_to_be32(0xF0000000)
};
/*
enum thermal_trip_type *);
int (*get_trip_temp) (struct thermal_zone_device *, int,
unsigned long *);
+ int (*set_trip_temp) (struct thermal_zone_device *, int,
+ unsigned long);
+ int (*get_trip_hyst) (struct thermal_zone_device *, int,
+ unsigned long *);
+ int (*set_trip_hyst) (struct thermal_zone_device *, int,
+ unsigned long);
int (*get_crit_temp) (struct thermal_zone_device *, unsigned long *);
int (*notify) (struct thermal_zone_device *, int,
enum thermal_trip_type);
((long)t-2732+5)/10 : ((long)t-2732-5)/10)
#define CELSIUS_TO_KELVIN(t) ((t)*10+2732)
+struct thermal_attr {
+ struct device_attribute attr;
+ char name[THERMAL_NAME_LENGTH];
+};
+
struct thermal_zone_device {
int id;
char type[THERMAL_NAME_LENGTH];
struct device device;
+ struct thermal_attr *trip_temp_attrs;
+ struct thermal_attr *trip_type_attrs;
+ struct thermal_attr *trip_hyst_attrs;
void *devdata;
int trips;
int tc1;
};
#define THERMAL_GENL_CMD_MAX (__THERMAL_GENL_CMD_MAX - 1)
-struct thermal_zone_device *thermal_zone_device_register(char *, int, void *,
- const struct thermal_zone_device_ops *, int tc1, int tc2,
- int passive_freq, int polling_freq);
+struct thermal_zone_device *thermal_zone_device_register(char *, int, int,
+ void *, const struct thermal_zone_device_ops *, int tc1,
+ int tc2, int passive_freq, int polling_freq);
void thermal_zone_device_unregister(struct thermal_zone_device *);
int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int,
unsigned wireless:1; /* Wireless USB HCD */
unsigned authorized_default:1;
unsigned has_tt:1; /* Integrated TT in root hub */
- unsigned broken_pci_sleep:1; /* Don't put the
- controller in PCI-D3 for system sleep */
unsigned int irq; /* irq allocated */
void __iomem *regs; /* device memory/io */
* vga_switcheroo.h - Support for laptop with dual GPU using one set of outputs
*/
+#ifndef _LINUX_VGA_SWITCHEROO_H_
+#define _LINUX_VGA_SWITCHEROO_H_
+
#include <linux/fb.h>
+struct pci_dev;
+
enum vga_switcheroo_state {
VGA_SWITCHEROO_OFF,
VGA_SWITCHEROO_ON,
+ /* below are referred only from vga_switcheroo_get_client_state() */
+ VGA_SWITCHEROO_INIT,
+ VGA_SWITCHEROO_NOT_FOUND,
};
enum vga_switcheroo_client_id {
int vga_switcheroo_process_delayed_switch(void);
+int vga_switcheroo_get_client_state(struct pci_dev *dev);
+
#else
static inline void vga_switcheroo_unregister_client(struct pci_dev *dev) {}
int id, bool active) { return 0; }
static inline void vga_switcheroo_unregister_handler(void) {}
static inline int vga_switcheroo_process_delayed_switch(void) { return 0; }
+static inline int vga_switcheroo_get_client_state(struct pci_dev *dev) { return VGA_SWITCHEROO_ON; }
+
#endif
+#endif /* _LINUX_VGA_SWITCHEROO_H_ */
/* Experimental, these three ioctls may change over the next couple of kernel
versions. */
-#define VIDIOC_ENUM_DV_TIMINGS _IOWR('V', 96, struct v4l2_enum_dv_timings)
-#define VIDIOC_QUERY_DV_TIMINGS _IOR('V', 97, struct v4l2_dv_timings)
-#define VIDIOC_DV_TIMINGS_CAP _IOWR('V', 98, struct v4l2_dv_timings_cap)
+#define VIDIOC_ENUM_DV_TIMINGS _IOWR('V', 98, struct v4l2_enum_dv_timings)
+#define VIDIOC_QUERY_DV_TIMINGS _IOR('V', 99, struct v4l2_dv_timings)
+#define VIDIOC_DV_TIMINGS_CAP _IOWR('V', 100, struct v4l2_dv_timings_cap)
/* Reminder: when adding new ioctls please add support for them to
drivers/media/video/v4l2-compat-ioctl32.c as well! */
__u8 data[240];
} __packed;
+#define HCI_EV_KEY_REFRESH_COMPLETE 0x30
+struct hci_ev_key_refresh_complete {
+ __u8 status;
+ __le16 handle;
+} __packed;
+
#define HCI_EV_IO_CAPA_REQUEST 0x31
struct hci_ev_io_capa_request {
bdaddr_t bdaddr;
u32 pmtu_orig;
u32 pmtu_learned;
struct inetpeer_addr_base redirect_learned;
- struct list_head gc_list;
+ union {
+ struct list_head gc_list;
+ struct rcu_head gc_rcu;
+ };
/*
* Once inet_peer is queued for deletion (refcnt == -1), following fields
* are not available: rid, ip_id_count, tcp_ts, tcp_ts_stamp
struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
if (!ct || !nf_ct_is_untracked(ct)) {
- nf_reset(skb);
+ nf_conntrack_put(skb->nfct);
skb->nfct = &nf_ct_untracked_get()->ct_general;
skb->nfctinfo = IP_CT_NEW;
nf_conntrack_get(skb->nfct);
* to also unregister the device. If it returns 1, then mac80211
* will also go through the regular complete restart on resume.
*
+ * @set_wakeup: Enable or disable wakeup when WoWLAN configuration is
+ * modified. The reason is that device_set_wakeup_enable() is
+ * supposed to be called when the configuration changes, not only
+ * in suspend().
+ *
* @add_interface: Called when a netdevice attached to the hardware is
* enabled. Because it is not called for monitor mode devices, @start
* and @stop must be implemented.
* ieee80211_generic_frame_duration - Calculate the duration field for a frame
* @hw: pointer obtained from ieee80211_alloc_hw().
* @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @band: the band to calculate the frame duration on
* @frame_len: the length of the frame.
* @rate: the rate at which the frame is going to be transmitted.
*
struct net *net = nf_ct_net(ct);
struct nf_conntrack_ecache *e;
- if (net->ct.nf_conntrack_event_cb == NULL)
+ if (!rcu_access_pointer(net->ct.nf_conntrack_event_cb))
return;
e = nf_ct_ecache_find(ct);
*
* Copyright (C) 2008 Nokia Corporation.
*
- * Author: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
+ * Author: Rémi Denis-Courmont
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
{
struct flowi4 fl4 = {
.flowi4_oif = oif,
+ .flowi4_tos = tos,
.daddr = daddr,
.saddr = saddr,
- .flowi4_tos = tos,
};
return ip_route_output_key(net, &fl4);
}
struct qdisc_skb_cb {
unsigned int pkt_len;
- unsigned char data[24];
+ u16 bond_queue_mapping;
+ u16 _pad;
+ unsigned char data[20];
};
static inline void qdisc_cb_private_validate(const struct sk_buff *skb, int sz)
{
struct qdisc_skb_cb *qcb;
- BUILD_BUG_ON(sizeof(skb->cb) < sizeof(unsigned int) + sz);
+
+ BUILD_BUG_ON(sizeof(skb->cb) < offsetof(struct qdisc_skb_cb, data) + sz);
BUILD_BUG_ON(sizeof(qcb->data) < sz);
}
/* Is this structure kfree()able? */
malloced:1;
+ /* Has this transport moved the ctsn since we last sacked */
+ __u32 sack_generation;
+
struct flowi fl;
/* This is the peer's IP address and port. */
*/
__u8 sack_needed; /* Do we need to sack the peer? */
__u32 sack_cnt;
+ __u32 sack_generation;
/* These are capabilities which our peer advertised. */
__u8 ecn_capable:1, /* Can peer do ECN? */
int sctp_tsnmap_check(const struct sctp_tsnmap *, __u32 tsn);
/* Mark this TSN as seen. */
-int sctp_tsnmap_mark(struct sctp_tsnmap *, __u32 tsn);
+int sctp_tsnmap_mark(struct sctp_tsnmap *, __u32 tsn,
+ struct sctp_transport *trans);
/* Mark this TSN and all lower as seen. */
void sctp_tsnmap_skip(struct sctp_tsnmap *map, __u32 tsn);
ATAPI_COMMAND_SET = 1,
};
+#define ATA_RESP_FIS_SIZE 24
+
struct sata_device {
enum ata_command_set command_set;
struct smp_resp rps_resp; /* report_phy_sata_resp */
struct ata_port *ap;
struct ata_host ata_host;
- struct ata_taskfile tf;
+ u8 fis[ATA_RESP_FIS_SIZE];
};
enum {
*/
struct ata_task_resp {
u16 frame_len;
- u8 ending_fis[24]; /* dev to host or data-in */
+ u8 ending_fis[ATA_RESP_FIS_SIZE]; /* dev to host or data-in */
};
#define SAS_STATUS_BUF_SIZE 96
static inline struct scsi_driver *scsi_cmd_to_driver(struct scsi_cmnd *cmd)
{
+ struct scsi_driver **sdp;
+
if (!cmd->request->rq_disk)
return NULL;
- return *(struct scsi_driver **)cmd->request->rq_disk->private_data;
+ sdp = (struct scsi_driver **)cmd->request->rq_disk->private_data;
+ if (!sdp)
+ return NULL;
+
+ return *sdp;
}
extern struct scsi_cmnd *scsi_get_command(struct scsi_device *, gfp_t);
SD_LAST_BUGGY_SECTORS */
unsigned no_read_disc_info:1; /* Avoid READ_DISC_INFO cmds */
unsigned no_read_capacity_16:1; /* Avoid READ_CAPACITY_16 cmds */
+ unsigned try_rc_10_first:1; /* Try READ_CAPACACITY_10 first */
unsigned is_visible:1; /* is the device visible in sysfs */
DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */
struct snd_tea575x {
struct v4l2_device *v4l2_dev;
+ struct v4l2_file_operations fops;
struct video_device vd; /* video device */
int radio_nr; /* radio_nr */
bool tea5759; /* 5759 chip is present */
int (*ext_init)(struct snd_tea575x *tea);
};
-int snd_tea575x_init(struct snd_tea575x *tea);
+int snd_tea575x_init(struct snd_tea575x *tea, struct module *owner);
void snd_tea575x_exit(struct snd_tea575x *tea);
#endif /* __SOUND_TEA575X_TUNER_H */
*/
int (*check_stop_free)(struct se_cmd *);
void (*release_cmd)(struct se_cmd *);
+ void (*put_session)(struct se_session *);
/*
* Called with spin_lock_bh(struct se_portal_group->session_lock held.
*/
* "In holdoff": Nothing to do, holding off after unsuccessful attempt.
* "Begin holdoff": Attempt failed, don't retry until next jiffy.
* "Dyntick with callbacks": Entering dyntick-idle despite callbacks.
+ * "Dyntick with lazy callbacks": Entering dyntick-idle w/lazy callbacks.
* "More callbacks": Still more callbacks, try again to clear them out.
* "Callbacks drained": All callbacks processed, off to dyntick idle!
* "Timer": Timer fired to cause CPU to continue processing callbacks.
parse_early_param();
parse_args("Booting kernel", static_command_line, __start___param,
__stop___param - __start___param,
- 0, 0, &unknown_bootoption);
+ -1, -1, &unknown_bootoption);
jump_label_init();
{
int level;
- for (level = 0; level < ARRAY_SIZE(initcall_levels) - 1; level++) {
- pr_info("initlevel:%d=%s, %d registered initcalls\n",
- level, initcall_level_names[level],
- (int) (initcall_levels[level+1]
- - initcall_levels[level]));
+ for (level = 0; level < ARRAY_SIZE(initcall_levels) - 1; level++)
do_initcall_level(level);
- }
}
/*
return sfd->file->f_op->fsync(sfd->file, start, end, datasync);
}
+static long shm_fallocate(struct file *file, int mode, loff_t offset,
+ loff_t len)
+{
+ struct shm_file_data *sfd = shm_file_data(file);
+
+ if (!sfd->file->f_op->fallocate)
+ return -EOPNOTSUPP;
+ return sfd->file->f_op->fallocate(file, mode, offset, len);
+}
+
static unsigned long shm_get_unmapped_area(struct file *file,
unsigned long addr, unsigned long len, unsigned long pgoff,
unsigned long flags)
.get_unmapped_area = shm_get_unmapped_area,
#endif
.llseek = noop_llseek,
+ .fallocate = shm_fallocate,
};
static const struct file_operations shm_file_operations_huge = {
.release = shm_release,
.get_unmapped_area = shm_get_unmapped_area,
.llseek = noop_llseek,
+ .fallocate = shm_fallocate,
};
int is_file_shm_hugepages(struct file *file)
EXPORT_SYMBOL_GPL(cgroup_lock_is_held);
+static int css_unbias_refcnt(int refcnt)
+{
+ return refcnt >= 0 ? refcnt : refcnt - CSS_DEACT_BIAS;
+}
+
/* the current nr of refs, always >= 0 whether @css is deactivated or not */
static int css_refcnt(struct cgroup_subsys_state *css)
{
int v = atomic_read(&css->refcnt);
- return v >= 0 ? v : v - CSS_DEACT_BIAS;
+ return css_unbias_refcnt(v);
}
/* convenient tests for these bits */
{
struct cgroup_subsys_state *css =
container_of(work, struct cgroup_subsys_state, dput_work);
+ struct dentry *dentry = css->cgroup->dentry;
+ struct super_block *sb = dentry->d_sb;
- dput(css->cgroup->dentry);
+ atomic_inc(&sb->s_active);
+ dput(dentry);
+ deactivate_super(sb);
}
static void init_cgroup_css(struct cgroup_subsys_state *css,
void __css_put(struct cgroup_subsys_state *css)
{
struct cgroup *cgrp = css->cgroup;
+ int v;
rcu_read_lock();
- atomic_dec(&css->refcnt);
- switch (css_refcnt(css)) {
+ v = css_unbias_refcnt(atomic_dec_return(&css->refcnt));
+
+ switch (v) {
case 1:
if (notify_on_release(cgrp)) {
set_bit(CGRP_RELEASABLE, &cgrp->flags);
#include <linux/ctype.h>
#include <linux/string.h>
#include <linux/kernel.h>
+#include <linux/kmsg_dump.h>
#include <linux/reboot.h>
#include <linux/sched.h>
#include <linux/sysrq.h>
*/
static int kdb_dmesg(int argc, const char **argv)
{
- char *syslog_data[4], *start, *end, c = '\0', *p;
- int diag, logging, logsize, lines = 0, adjust = 0, n;
+ int diag;
+ int logging;
+ int lines = 0;
+ int adjust = 0;
+ int n = 0;
+ int skip = 0;
+ struct kmsg_dumper dumper = { .active = 1 };
+ size_t len;
+ char buf[201];
if (argc > 2)
return KDB_ARGCOUNT;
kdb_set(2, setargs);
}
- /* syslog_data[0,1] physical start, end+1. syslog_data[2,3]
- * logical start, end+1. */
- kdb_syslog_data(syslog_data);
- if (syslog_data[2] == syslog_data[3])
- return 0;
- logsize = syslog_data[1] - syslog_data[0];
- start = syslog_data[2];
- end = syslog_data[3];
-#define KDB_WRAP(p) (((p - syslog_data[0]) % logsize) + syslog_data[0])
- for (n = 0, p = start; p < end; ++p) {
- c = *KDB_WRAP(p);
- if (c == '\n')
- ++n;
- }
- if (c != '\n')
- ++n;
+ kmsg_dump_rewind_nolock(&dumper);
+ while (kmsg_dump_get_line_nolock(&dumper, 1, NULL, 0, NULL))
+ n++;
+
if (lines < 0) {
if (adjust >= n)
kdb_printf("buffer only contains %d lines, nothing "
else if (adjust - lines >= n)
kdb_printf("buffer only contains %d lines, last %d "
"lines printed\n", n, n - adjust);
- if (adjust) {
- for (; start < end && adjust; ++start) {
- if (*KDB_WRAP(start) == '\n')
- --adjust;
- }
- if (start < end)
- ++start;
- }
- for (p = start; p < end && lines; ++p) {
- if (*KDB_WRAP(p) == '\n')
- ++lines;
- }
- end = p;
+ skip = adjust;
+ lines = abs(lines);
} else if (lines > 0) {
- int skip = n - (adjust + lines);
+ skip = n - lines - adjust;
+ lines = abs(lines);
if (adjust >= n) {
kdb_printf("buffer only contains %d lines, "
"nothing printed\n", n);
kdb_printf("buffer only contains %d lines, first "
"%d lines printed\n", n, lines);
}
- for (; start < end && skip; ++start) {
- if (*KDB_WRAP(start) == '\n')
- --skip;
- }
- for (p = start; p < end && lines; ++p) {
- if (*KDB_WRAP(p) == '\n')
- --lines;
- }
- end = p;
+ } else {
+ lines = n;
}
- /* Do a line at a time (max 200 chars) to reduce protocol overhead */
- c = '\n';
- while (start != end) {
- char buf[201];
- p = buf;
- if (KDB_FLAG(CMD_INTERRUPT))
- return 0;
- while (start < end && (c = *KDB_WRAP(start)) &&
- (p - buf) < sizeof(buf)-1) {
- ++start;
- *p++ = c;
- if (c == '\n')
- break;
+
+ if (skip >= n || skip < 0)
+ return 0;
+
+ kmsg_dump_rewind_nolock(&dumper);
+ while (kmsg_dump_get_line_nolock(&dumper, 1, buf, sizeof(buf), &len)) {
+ if (skip) {
+ skip--;
+ continue;
}
- *p = '\0';
- kdb_printf("%s", buf);
+ if (!lines--)
+ break;
+
+ kdb_printf("%.*s\n", (int)len - 1, buf);
}
- if (c != '\n')
- kdb_printf("\n");
return 0;
}
extern int kdb_grep_leading;
extern int kdb_grep_trailing;
extern char *kdb_cmds[];
-extern void kdb_syslog_data(char *syslog_data[]);
extern unsigned long kdb_task_state_string(const char *);
extern char kdb_task_state_char (const struct task_struct *);
extern unsigned long kdb_task_state(const struct task_struct *p,
return !event->cgrp || event->cgrp == cpuctx->cgrp;
}
-static inline void perf_get_cgroup(struct perf_event *event)
+static inline bool perf_tryget_cgroup(struct perf_event *event)
{
- css_get(&event->cgrp->css);
+ return css_tryget(&event->cgrp->css);
}
static inline void perf_put_cgroup(struct perf_event *event)
event->cgrp = cgrp;
/* must be done before we fput() the file */
- perf_get_cgroup(event);
+ if (!perf_tryget_cgroup(event)) {
+ event->cgrp = NULL;
+ ret = -ENOENT;
+ goto out;
+ }
/*
* all events in a group must monitor
event = event->group_leader;
perf_event_for_each_child(event, func);
- func(event);
list_for_each_entry(sibling, &event->sibling_list, group_entry)
perf_event_for_each_child(sibling, func);
mutex_unlock(&ctx->mutex);
list_del_rcu(&p->tasks);
list_del_init(&p->sibling);
__this_cpu_dec(process_counts);
+ /*
+ * If we are the last child process in a pid namespace to be
+ * reaped, notify the reaper sleeping zap_pid_ns_processes().
+ */
+ if (IS_ENABLED(CONFIG_PID_NS)) {
+ struct task_struct *parent = p->real_parent;
+
+ if ((task_active_pid_ns(parent)->child_reaper == parent) &&
+ list_empty(&parent->children) &&
+ (parent->flags & PF_EXITING))
+ wake_up_process(parent);
+ }
}
list_del_rcu(&p->thread_group);
}
mm_release(tsk, mm);
if (!mm)
return;
+ sync_mm_rss(mm);
/*
* Serialize with any possible pending coredump.
* We must hold mmap_sem around checking core_state
zap_pid_ns_processes(pid_ns);
write_lock_irq(&tasklist_lock);
- /*
- * We can not clear ->child_reaper or leave it alone.
- * There may by stealth EXIT_DEAD tasks on ->children,
- * forget_original_parent() must move them somewhere.
- */
- pid_ns->child_reaper = init_pid_ns.child_reaper;
} else if (father->signal->has_child_subreaper) {
struct task_struct *reaper;
}
err = arch_dup_task_struct(tsk, orig);
- if (err)
- goto out;
+ /*
+ * We defer looking at err, because we will need this setup
+ * for the clean up path to work correctly.
+ */
tsk->stack = ti;
-
setup_thread_stack(tsk, orig);
+
+ if (err)
+ goto out;
+
clear_user_return_notifier(tsk);
clear_tsk_need_resched(tsk);
stackend = end_of_stack(tsk);
return 0;
}
+static inline ktime_t hrtimer_update_base(struct hrtimer_cpu_base *base)
+{
+ ktime_t *offs_real = &base->clock_base[HRTIMER_BASE_REALTIME].offset;
+ ktime_t *offs_boot = &base->clock_base[HRTIMER_BASE_BOOTTIME].offset;
+
+ return ktime_get_update_offsets(offs_real, offs_boot);
+}
+
/*
* Retrigger next event is called after clock was set
*
static void retrigger_next_event(void *arg)
{
struct hrtimer_cpu_base *base = &__get_cpu_var(hrtimer_bases);
- struct timespec realtime_offset, xtim, wtm, sleep;
if (!hrtimer_hres_active())
return;
- /* Optimized out for !HIGH_RES */
- get_xtime_and_monotonic_and_sleep_offset(&xtim, &wtm, &sleep);
- set_normalized_timespec(&realtime_offset, -wtm.tv_sec, -wtm.tv_nsec);
-
- /* Adjust CLOCK_REALTIME offset */
raw_spin_lock(&base->lock);
- base->clock_base[HRTIMER_BASE_REALTIME].offset =
- timespec_to_ktime(realtime_offset);
- base->clock_base[HRTIMER_BASE_BOOTTIME].offset =
- timespec_to_ktime(sleep);
-
+ hrtimer_update_base(base);
hrtimer_force_reprogram(base, 0);
raw_spin_unlock(&base->lock);
}
base->clock_base[i].resolution = KTIME_HIGH_RES;
tick_setup_sched_timer();
-
/* "Retrigger" the interrupt to get things going */
retrigger_next_event(NULL);
local_irq_restore(flags);
return 1;
}
+/*
+ * Called from timekeeping code to reprogramm the hrtimer interrupt
+ * device. If called from the timer interrupt context we defer it to
+ * softirq context.
+ */
+void clock_was_set_delayed(void)
+{
+ struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
+
+ cpu_base->clock_was_set = 1;
+ __raise_softirq_irqoff(HRTIMER_SOFTIRQ);
+}
+
#else
static inline int hrtimer_hres_active(void) { return 0; }
cpu_base->nr_events++;
dev->next_event.tv64 = KTIME_MAX;
- entry_time = now = ktime_get();
+ raw_spin_lock(&cpu_base->lock);
+ entry_time = now = hrtimer_update_base(cpu_base);
retry:
expires_next.tv64 = KTIME_MAX;
-
- raw_spin_lock(&cpu_base->lock);
/*
* We set expires_next to KTIME_MAX here with cpu_base->lock
* held to prevent that a timer is enqueued in our queue via
* We need to prevent that we loop forever in the hrtimer
* interrupt routine. We give it 3 attempts to avoid
* overreacting on some spurious event.
+ *
+ * Acquire base lock for updating the offsets and retrieving
+ * the current time.
*/
- now = ktime_get();
+ raw_spin_lock(&cpu_base->lock);
+ now = hrtimer_update_base(cpu_base);
cpu_base->nr_retries++;
if (++retries < 3)
goto retry;
*/
cpu_base->nr_hangs++;
cpu_base->hang_detected = 1;
+ raw_spin_unlock(&cpu_base->lock);
delta = ktime_sub(now, entry_time);
if (delta.tv64 > cpu_base->max_hang_time.tv64)
cpu_base->max_hang_time = delta;
static void run_hrtimer_softirq(struct softirq_action *h)
{
+ struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
+
+ if (cpu_base->clock_was_set) {
+ cpu_base->clock_was_set = 0;
+ clock_was_set();
+ }
+
hrtimer_peek_ahead_timers();
}
kstat_incr_irqs_this_cpu(irq, desc);
action = desc->action;
- if (unlikely(!action || irqd_irq_disabled(&desc->irq_data)))
+ if (unlikely(!action || irqd_irq_disabled(&desc->irq_data))) {
+ desc->istate |= IRQS_PENDING;
goto out_unlock;
+ }
irqd_set(&desc->irq_data, IRQD_IRQ_INPROGRESS);
raw_spin_unlock_irq(&desc->lock);
desc->istate &= ~(IRQS_REPLAY | IRQS_WAITING);
kstat_incr_irqs_this_cpu(irq, desc);
- if (unlikely(!desc->action || irqd_irq_disabled(&desc->irq_data)))
+ if (unlikely(!desc->action || irqd_irq_disabled(&desc->irq_data))) {
+ desc->istate |= IRQS_PENDING;
goto out_unlock;
+ }
handle_irq_event(desc);
extern void irq_set_thread_affinity(struct irq_desc *desc);
+extern int irq_do_set_affinity(struct irq_data *data,
+ const struct cpumask *dest, bool force);
+
/* Inline functions for support of irq chips on slow busses */
static inline void chip_bus_lock(struct irq_desc *desc)
{
irq_get_pending(struct cpumask *mask, struct irq_desc *desc) { }
#endif
+int irq_do_set_affinity(struct irq_data *data, const struct cpumask *mask,
+ bool force)
+{
+ struct irq_desc *desc = irq_data_to_desc(data);
+ struct irq_chip *chip = irq_data_get_irq_chip(data);
+ int ret;
+
+ ret = chip->irq_set_affinity(data, mask, false);
+ switch (ret) {
+ case IRQ_SET_MASK_OK:
+ cpumask_copy(data->affinity, mask);
+ case IRQ_SET_MASK_OK_NOCOPY:
+ irq_set_thread_affinity(desc);
+ ret = 0;
+ }
+
+ return ret;
+}
+
int __irq_set_affinity_locked(struct irq_data *data, const struct cpumask *mask)
{
struct irq_chip *chip = irq_data_get_irq_chip(data);
return -EINVAL;
if (irq_can_move_pcntxt(data)) {
- ret = chip->irq_set_affinity(data, mask, false);
- switch (ret) {
- case IRQ_SET_MASK_OK:
- cpumask_copy(data->affinity, mask);
- case IRQ_SET_MASK_OK_NOCOPY:
- irq_set_thread_affinity(desc);
- ret = 0;
- }
+ ret = irq_do_set_affinity(data, mask, false);
} else {
irqd_set_move_pending(data);
irq_copy_pending(desc, mask);
static int
setup_affinity(unsigned int irq, struct irq_desc *desc, struct cpumask *mask)
{
- struct irq_chip *chip = irq_desc_get_chip(desc);
struct cpumask *set = irq_default_affinity;
- int ret, node = desc->irq_data.node;
+ int node = desc->irq_data.node;
/* Excludes PER_CPU and NO_BALANCE interrupts */
if (!irq_can_set_affinity(irq))
if (cpumask_intersects(mask, nodemask))
cpumask_and(mask, mask, nodemask);
}
- ret = chip->irq_set_affinity(&desc->irq_data, mask, false);
- switch (ret) {
- case IRQ_SET_MASK_OK:
- cpumask_copy(desc->irq_data.affinity, mask);
- case IRQ_SET_MASK_OK_NOCOPY:
- irq_set_thread_affinity(desc);
- }
+ irq_do_set_affinity(&desc->irq_data, mask, false);
return 0;
}
#else
* For correct operation this depends on the caller
* masking the irqs.
*/
- if (likely(cpumask_any_and(desc->pending_mask, cpu_online_mask)
- < nr_cpu_ids)) {
- int ret = chip->irq_set_affinity(&desc->irq_data,
- desc->pending_mask, false);
- switch (ret) {
- case IRQ_SET_MASK_OK:
- cpumask_copy(desc->irq_data.affinity, desc->pending_mask);
- case IRQ_SET_MASK_OK_NOCOPY:
- irq_set_thread_affinity(desc);
- }
- }
+ if (cpumask_any_and(desc->pending_mask, cpu_online_mask) < nr_cpu_ids)
+ irq_do_set_affinity(&desc->irq_data, desc->pending_mask, false);
cpumask_clear(desc->pending_mask);
}
#define PANIC_TIMER_STEP 100
#define PANIC_BLINK_SPD 18
-int panic_on_oops;
+int panic_on_oops = CONFIG_PANIC_ON_OOPS_VALUE;
static unsigned long tainted_mask;
static int pause_on_oops;
static int pause_on_oops_flag;
*/
crash_kexec(NULL);
- kmsg_dump(KMSG_DUMP_PANIC);
-
/*
* Note smp_send_stop is the usual smp shutdown function, which
* unfortunately means it may not be hardened to work in a panic
*/
smp_send_stop();
+ kmsg_dump(KMSG_DUMP_PANIC);
+
atomic_notifier_call_chain(&panic_notifier_list, 0, buf);
bust_spinlocks(0);
}
read_unlock(&tasklist_lock);
+ /* Firstly reap the EXIT_ZOMBIE children we may have. */
do {
clear_thread_flag(TIF_SIGPENDING);
rc = sys_wait4(-1, NULL, __WALL, NULL);
} while (rc != -ECHILD);
+ /*
+ * sys_wait4() above can't reap the TASK_DEAD children.
+ * Make sure they all go away, see __unhash_process().
+ */
+ for (;;) {
+ bool need_wait = false;
+
+ read_lock(&tasklist_lock);
+ if (!list_empty(¤t->children)) {
+ __set_current_state(TASK_UNINTERRUPTIBLE);
+ need_wait = true;
+ }
+ read_unlock(&tasklist_lock);
+
+ if (!need_wait)
+ break;
+ schedule();
+ }
+
if (pid_ns->reboot)
current->signal->group_exit_code = pid_ns->reboot;
#include <linux/syscore_ops.h>
#include <linux/ctype.h>
#include <linux/genhd.h>
-#include <scsi/scsi_scan.h>
#include "power.h"
async_synchronize_full();
}
- /*
- * We can't depend on SCSI devices being available after loading
- * one of their modules until scsi_complete_async_scans() is
- * called and the resume device usually is a SCSI one.
- */
- scsi_complete_async_scans();
-
swsusp_resume_device = name_to_dev_t(resume_file);
if (!swsusp_resume_device) {
error = -ENODEV;
#include <linux/console.h>
#include <linux/cpu.h>
#include <linux/freezer.h>
-#include <scsi/scsi_scan.h>
#include <asm/uaccess.h>
* appear.
*/
wait_for_device_probe();
- scsi_complete_async_scans();
data->swap = -1;
data->mode = O_WRONLY;
* separated by ',', and find the message after the ';' character.
*/
+enum log_flags {
+ LOG_NOCONS = 1, /* already flushed, do not print to console */
+ LOG_NEWLINE = 2, /* text ended with a newline */
+ LOG_PREFIX = 4, /* text started with a prefix */
+ LOG_CONT = 8, /* text is a fragment of a continuation line */
+};
+
struct log {
u64 ts_nsec; /* timestamp in nanoseconds */
u16 len; /* length of entire record */
u16 text_len; /* length of text buffer */
u16 dict_len; /* length of dictionary buffer */
- u16 level; /* syslog level + facility */
+ u8 facility; /* syslog facility */
+ u8 flags:5; /* internal record flags */
+ u8 level:3; /* syslog level */
};
/*
/* the next printk record to read by syslog(READ) or /proc/kmsg */
static u64 syslog_seq;
static u32 syslog_idx;
+static enum log_flags syslog_prev;
+static size_t syslog_partial;
/* index and sequence number of the first record stored in the buffer */
static u64 log_first_seq;
#define LOG_LINE_MAX 1024
/* record buffer */
-#if !defined(CONFIG_64BIT) || defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS)
+#if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS)
#define LOG_ALIGN 4
#else
-#define LOG_ALIGN 8
+#define LOG_ALIGN __alignof__(struct log)
#endif
#define __LOG_BUF_LEN (1 << CONFIG_LOG_BUF_SHIFT)
static char __log_buf[__LOG_BUF_LEN] __aligned(LOG_ALIGN);
/* insert record into the buffer, discard old ones, update heads */
static void log_store(int facility, int level,
+ enum log_flags flags, u64 ts_nsec,
const char *dict, u16 dict_len,
const char *text, u16 text_len)
{
msg->text_len = text_len;
memcpy(log_dict(msg), dict, dict_len);
msg->dict_len = dict_len;
- msg->level = (facility << 3) | (level & 7);
- msg->ts_nsec = local_clock();
+ msg->facility = facility;
+ msg->level = level & 7;
+ msg->flags = flags & 0x1f;
+ if (ts_nsec > 0)
+ msg->ts_nsec = ts_nsec;
+ else
+ msg->ts_nsec = local_clock();
memset(log_dict(msg) + dict_len, 0, pad_len);
msg->len = sizeof(struct log) + text_len + dict_len + pad_len;
if (!user)
return -EBADF;
- mutex_lock(&user->lock);
- raw_spin_lock(&logbuf_lock);
+ ret = mutex_lock_interruptible(&user->lock);
+ if (ret)
+ return ret;
+ raw_spin_lock_irq(&logbuf_lock);
while (user->seq == log_next_seq) {
if (file->f_flags & O_NONBLOCK) {
ret = -EAGAIN;
- raw_spin_unlock(&logbuf_lock);
+ raw_spin_unlock_irq(&logbuf_lock);
goto out;
}
- raw_spin_unlock(&logbuf_lock);
+ raw_spin_unlock_irq(&logbuf_lock);
ret = wait_event_interruptible(log_wait,
user->seq != log_next_seq);
if (ret)
goto out;
- raw_spin_lock(&logbuf_lock);
+ raw_spin_lock_irq(&logbuf_lock);
}
if (user->seq < log_first_seq) {
user->idx = log_first_idx;
user->seq = log_first_seq;
ret = -EPIPE;
- raw_spin_unlock(&logbuf_lock);
+ raw_spin_unlock_irq(&logbuf_lock);
goto out;
}
ts_usec = msg->ts_nsec;
do_div(ts_usec, 1000);
len = sprintf(user->buf, "%u,%llu,%llu;",
- msg->level, user->seq, ts_usec);
+ (msg->facility << 3) | msg->level, user->seq, ts_usec);
/* escape non-printable characters */
for (i = 0; i < msg->text_len; i++) {
unsigned char c = log_text(msg)[i];
- if (c < ' ' || c >= 128)
+ if (c < ' ' || c >= 127 || c == '\\')
len += sprintf(user->buf + len, "\\x%02x", c);
else
user->buf[len++] = c;
continue;
}
- if (c < ' ' || c >= 128) {
+ if (c < ' ' || c >= 127 || c == '\\') {
len += sprintf(user->buf + len, "\\x%02x", c);
continue;
}
user->idx = log_next(user->idx);
user->seq++;
- raw_spin_unlock(&logbuf_lock);
+ raw_spin_unlock_irq(&logbuf_lock);
if (len > count) {
ret = -EINVAL;
if (offset)
return -ESPIPE;
- raw_spin_lock(&logbuf_lock);
+ raw_spin_lock_irq(&logbuf_lock);
switch (whence) {
case SEEK_SET:
/* the first record */
default:
ret = -EINVAL;
}
- raw_spin_unlock(&logbuf_lock);
+ raw_spin_unlock_irq(&logbuf_lock);
return ret;
}
poll_wait(file, &log_wait, wait);
- raw_spin_lock(&logbuf_lock);
+ raw_spin_lock_irq(&logbuf_lock);
if (user->seq < log_next_seq) {
/* return error when data has vanished underneath us */
if (user->seq < log_first_seq)
ret = POLLIN|POLLRDNORM|POLLERR|POLLPRI;
ret = POLLIN|POLLRDNORM;
}
- raw_spin_unlock(&logbuf_lock);
+ raw_spin_unlock_irq(&logbuf_lock);
return ret;
}
mutex_init(&user->lock);
- raw_spin_lock(&logbuf_lock);
+ raw_spin_lock_irq(&logbuf_lock);
user->idx = log_first_idx;
user->seq = log_first_seq;
- raw_spin_unlock(&logbuf_lock);
+ raw_spin_unlock_irq(&logbuf_lock);
file->private_data = user;
return 0;
#endif
module_param_named(time, printk_time, bool, S_IRUGO | S_IWUSR);
+static size_t print_time(u64 ts, char *buf)
+{
+ unsigned long rem_nsec;
+
+ if (!printk_time)
+ return 0;
+
+ if (!buf)
+ return 15;
+
+ rem_nsec = do_div(ts, 1000000000);
+ return sprintf(buf, "[%5lu.%06lu] ",
+ (unsigned long)ts, rem_nsec / 1000);
+}
+
static size_t print_prefix(const struct log *msg, bool syslog, char *buf)
{
size_t len = 0;
+ unsigned int prefix = (msg->facility << 3) | msg->level;
if (syslog) {
if (buf) {
- len += sprintf(buf, "<%u>", msg->level);
+ len += sprintf(buf, "<%u>", prefix);
} else {
len += 3;
- if (msg->level > 9)
- len++;
- if (msg->level > 99)
+ if (prefix > 999)
+ len += 3;
+ else if (prefix > 99)
+ len += 2;
+ else if (prefix > 9)
len++;
}
}
- if (printk_time) {
- if (buf) {
- unsigned long long ts = msg->ts_nsec;
- unsigned long rem_nsec = do_div(ts, 1000000000);
-
- len += sprintf(buf + len, "[%5lu.%06lu] ",
- (unsigned long) ts, rem_nsec / 1000);
- } else {
- len += 15;
- }
- }
-
+ len += print_time(msg->ts_nsec, buf ? buf + len : NULL);
return len;
}
-static size_t msg_print_text(const struct log *msg, bool syslog,
- char *buf, size_t size)
+static size_t msg_print_text(const struct log *msg, enum log_flags prev,
+ bool syslog, char *buf, size_t size)
{
const char *text = log_text(msg);
size_t text_size = msg->text_len;
+ bool prefix = true;
+ bool newline = true;
size_t len = 0;
+ if ((prev & LOG_CONT) && !(msg->flags & LOG_PREFIX))
+ prefix = false;
+
+ if (msg->flags & LOG_CONT) {
+ if ((prev & LOG_CONT) && !(prev & LOG_NEWLINE))
+ prefix = false;
+
+ if (!(msg->flags & LOG_NEWLINE))
+ newline = false;
+ }
+
do {
const char *next = memchr(text, '\n', text_size);
size_t text_len;
text_len + 1>= size - len)
break;
- len += print_prefix(msg, syslog, buf + len);
+ if (prefix)
+ len += print_prefix(msg, syslog, buf + len);
memcpy(buf + len, text, text_len);
len += text_len;
- buf[len++] = '\n';
+ if (next || newline)
+ buf[len++] = '\n';
} else {
/* SYSLOG_ACTION_* buffer size only calculation */
- len += print_prefix(msg, syslog, NULL);
- len += text_len + 1;
+ if (prefix)
+ len += print_prefix(msg, syslog, NULL);
+ len += text_len;
+ if (next || newline)
+ len++;
}
+ prefix = true;
text = next;
} while (text);
{
char *text;
struct log *msg;
- int len;
+ int len = 0;
text = kmalloc(LOG_LINE_MAX, GFP_KERNEL);
if (!text)
return -ENOMEM;
- raw_spin_lock_irq(&logbuf_lock);
- if (syslog_seq < log_first_seq) {
- /* messages are gone, move to first one */
- syslog_seq = log_first_seq;
- syslog_idx = log_first_idx;
- }
- msg = log_from_idx(syslog_idx);
- len = msg_print_text(msg, true, text, LOG_LINE_MAX);
- syslog_idx = log_next(syslog_idx);
- syslog_seq++;
- raw_spin_unlock_irq(&logbuf_lock);
+ while (size > 0) {
+ size_t n;
+ size_t skip;
- if (len > 0 && copy_to_user(buf, text, len))
- len = -EFAULT;
+ raw_spin_lock_irq(&logbuf_lock);
+ if (syslog_seq < log_first_seq) {
+ /* messages are gone, move to first one */
+ syslog_seq = log_first_seq;
+ syslog_idx = log_first_idx;
+ syslog_prev = 0;
+ syslog_partial = 0;
+ }
+ if (syslog_seq == log_next_seq) {
+ raw_spin_unlock_irq(&logbuf_lock);
+ break;
+ }
+
+ skip = syslog_partial;
+ msg = log_from_idx(syslog_idx);
+ n = msg_print_text(msg, syslog_prev, true, text, LOG_LINE_MAX);
+ if (n - syslog_partial <= size) {
+ /* message fits into buffer, move forward */
+ syslog_idx = log_next(syslog_idx);
+ syslog_seq++;
+ syslog_prev = msg->flags;
+ n -= syslog_partial;
+ syslog_partial = 0;
+ } else if (!len){
+ /* partial read(), remember position */
+ n = size;
+ syslog_partial += n;
+ } else
+ n = 0;
+ raw_spin_unlock_irq(&logbuf_lock);
+
+ if (!n)
+ break;
+
+ if (copy_to_user(buf, text + skip, n)) {
+ if (!len)
+ len = -EFAULT;
+ break;
+ }
+
+ len += n;
+ size -= n;
+ buf += n;
+ }
kfree(text);
return len;
u64 next_seq;
u64 seq;
u32 idx;
+ enum log_flags prev;
if (clear_seq < log_first_seq) {
/* messages are gone, move to first available one */
/*
* Find first record that fits, including all following records,
* into the user-provided buffer for this dump.
- */
+ */
seq = clear_seq;
idx = clear_idx;
+ prev = 0;
while (seq < log_next_seq) {
struct log *msg = log_from_idx(idx);
- len += msg_print_text(msg, true, NULL, 0);
+ len += msg_print_text(msg, prev, true, NULL, 0);
idx = log_next(idx);
seq++;
}
+
+ /* move first record forward until length fits into the buffer */
seq = clear_seq;
idx = clear_idx;
+ prev = 0;
while (len > size && seq < log_next_seq) {
struct log *msg = log_from_idx(idx);
- len -= msg_print_text(msg, true, NULL, 0);
+ len -= msg_print_text(msg, prev, true, NULL, 0);
idx = log_next(idx);
seq++;
}
- /* last message in this dump */
+ /* last message fitting into this dump */
next_seq = log_next_seq;
len = 0;
+ prev = 0;
while (len >= 0 && seq < next_seq) {
struct log *msg = log_from_idx(idx);
int textlen;
- textlen = msg_print_text(msg, true, text, LOG_LINE_MAX);
+ textlen = msg_print_text(msg, prev, true, text, LOG_LINE_MAX);
if (textlen < 0) {
len = textlen;
break;
}
idx = log_next(idx);
seq++;
+ prev = msg->flags;
raw_spin_unlock_irq(&logbuf_lock);
if (copy_to_user(buf + len, text, textlen))
/* messages are gone, move to next one */
seq = log_first_seq;
idx = log_first_idx;
+ prev = 0;
}
}
}
/* Clear ring buffer */
case SYSLOG_ACTION_CLEAR:
syslog_print_all(NULL, 0, true);
+ break;
/* Disable logging to console */
case SYSLOG_ACTION_CONSOLE_OFF:
if (saved_console_loglevel == -1)
/* messages are gone, move to first one */
syslog_seq = log_first_seq;
syslog_idx = log_first_idx;
+ syslog_prev = 0;
+ syslog_partial = 0;
}
if (from_file) {
/*
*/
error = log_next_idx - syslog_idx;
} else {
- u64 seq;
- u32 idx;
+ u64 seq = syslog_seq;
+ u32 idx = syslog_idx;
+ enum log_flags prev = syslog_prev;
error = 0;
- seq = syslog_seq;
- idx = syslog_idx;
while (seq < log_next_seq) {
struct log *msg = log_from_idx(idx);
- error += msg_print_text(msg, true, NULL, 0);
+ error += msg_print_text(msg, prev, true, NULL, 0);
idx = log_next(idx);
seq++;
+ prev = msg->flags;
}
+ error -= syslog_partial;
}
raw_spin_unlock_irq(&logbuf_lock);
break;
return do_syslog(type, buf, len, SYSLOG_FROM_CALL);
}
-#ifdef CONFIG_KGDB_KDB
-/* kdb dmesg command needs access to the syslog buffer. do_syslog()
- * uses locks so it cannot be used during debugging. Just tell kdb
- * where the start and end of the physical and logical logs are. This
- * is equivalent to do_syslog(3).
- */
-void kdb_syslog_data(char *syslog_data[4])
-{
- syslog_data[0] = log_buf;
- syslog_data[1] = log_buf + log_buf_len;
- syslog_data[2] = log_buf + log_first_idx;
- syslog_data[3] = log_buf + log_next_idx;
-}
-#endif /* CONFIG_KGDB_KDB */
-
static bool __read_mostly ignore_loglevel;
static int __init ignore_loglevel_setup(char *str)
}
}
+/*
+ * Continuation lines are buffered, and not committed to the record buffer
+ * until the line is complete, or a race forces it. The line fragments
+ * though, are printed immediately to the consoles to ensure everything has
+ * reached the console in case of a kernel crash.
+ */
+static struct cont {
+ char buf[LOG_LINE_MAX];
+ size_t len; /* length == 0 means unused buffer */
+ size_t cons; /* bytes written to console */
+ struct task_struct *owner; /* task of first print*/
+ u64 ts_nsec; /* time of first print */
+ u8 level; /* log level of first message */
+ u8 facility; /* log level of first message */
+ bool flushed:1; /* buffer sealed and committed */
+} cont;
+
+static void cont_flush(void)
+{
+ if (cont.flushed)
+ return;
+ if (cont.len == 0)
+ return;
+
+ log_store(cont.facility, cont.level, LOG_NOCONS, cont.ts_nsec,
+ NULL, 0, cont.buf, cont.len);
+
+ cont.flushed = true;
+}
+
+static bool cont_add(int facility, int level, const char *text, size_t len)
+{
+ if (cont.len && cont.flushed)
+ return false;
+
+ if (cont.len + len > sizeof(cont.buf)) {
+ cont_flush();
+ return false;
+ }
+
+ if (!cont.len) {
+ cont.facility = facility;
+ cont.level = level;
+ cont.owner = current;
+ cont.ts_nsec = local_clock();
+ cont.cons = 0;
+ cont.flushed = false;
+ }
+
+ memcpy(cont.buf + cont.len, text, len);
+ cont.len += len;
+ return true;
+}
+
+static size_t cont_print_text(char *text, size_t size)
+{
+ size_t textlen = 0;
+ size_t len;
+
+ if (cont.cons == 0) {
+ textlen += print_time(cont.ts_nsec, text);
+ size -= textlen;
+ }
+
+ len = cont.len - cont.cons;
+ if (len > 0) {
+ if (len+1 > size)
+ len = size-1;
+ memcpy(text + textlen, cont.buf + cont.cons, len);
+ textlen += len;
+ cont.cons = cont.len;
+ }
+
+ if (cont.flushed) {
+ text[textlen++] = '\n';
+ /* got everything, release buffer */
+ cont.len = 0;
+ }
+ return textlen;
+}
+
asmlinkage int vprintk_emit(int facility, int level,
const char *dict, size_t dictlen,
const char *fmt, va_list args)
{
static int recursion_bug;
- static char cont_buf[LOG_LINE_MAX];
- static size_t cont_len;
- static int cont_level;
- static struct task_struct *cont_task;
static char textbuf[LOG_LINE_MAX];
char *text = textbuf;
size_t text_len;
+ enum log_flags lflags = 0;
unsigned long flags;
int this_cpu;
- bool newline = false;
- bool prefix = false;
int printed_len = 0;
boot_delay_msec();
recursion_bug = 0;
printed_len += strlen(recursion_msg);
/* emit KERN_CRIT message */
- log_store(0, 2, NULL, 0, recursion_msg, printed_len);
+ log_store(0, 2, LOG_PREFIX|LOG_NEWLINE, 0,
+ NULL, 0, recursion_msg, printed_len);
}
/*
/* mark and strip a trailing newline */
if (text_len && text[text_len-1] == '\n') {
text_len--;
- newline = true;
+ lflags |= LOG_NEWLINE;
}
/* strip syslog prefix and extract log level or control flags */
if (level == -1)
level = text[1] - '0';
case 'd': /* KERN_DEFAULT */
- prefix = true;
+ lflags |= LOG_PREFIX;
case 'c': /* KERN_CONT */
text += 3;
text_len -= 3;
if (level == -1)
level = default_message_loglevel;
- if (dict) {
- prefix = true;
- newline = true;
- }
-
- if (!newline) {
- if (cont_len && (prefix || cont_task != current)) {
- /*
- * Flush earlier buffer, which is either from a
- * different thread, or when we got a new prefix.
- */
- log_store(facility, cont_level, NULL, 0, cont_buf, cont_len);
- cont_len = 0;
- }
+ if (dict)
+ lflags |= LOG_PREFIX|LOG_NEWLINE;
- if (!cont_len) {
- cont_level = level;
- cont_task = current;
- }
+ if (!(lflags & LOG_NEWLINE)) {
+ /*
+ * Flush the conflicting buffer. An earlier newline was missing,
+ * or another task also prints continuation lines.
+ */
+ if (cont.len && (lflags & LOG_PREFIX || cont.owner != current))
+ cont_flush();
- /* buffer or append to earlier buffer from the same thread */
- if (cont_len + text_len > sizeof(cont_buf))
- text_len = sizeof(cont_buf) - cont_len;
- memcpy(cont_buf + cont_len, text, text_len);
- cont_len += text_len;
+ /* buffer line if possible, otherwise store it right away */
+ if (!cont_add(facility, level, text, text_len))
+ log_store(facility, level, lflags | LOG_CONT, 0,
+ dict, dictlen, text, text_len);
} else {
- if (cont_len && cont_task == current) {
- if (prefix) {
- /*
- * New prefix from the same thread; flush. We
- * either got no earlier newline, or we race
- * with an interrupt.
- */
- log_store(facility, cont_level,
- NULL, 0, cont_buf, cont_len);
- cont_len = 0;
- }
+ bool stored = false;
- /* append to the earlier buffer and flush */
- if (cont_len + text_len > sizeof(cont_buf))
- text_len = sizeof(cont_buf) - cont_len;
- memcpy(cont_buf + cont_len, text, text_len);
- cont_len += text_len;
- log_store(facility, cont_level,
- NULL, 0, cont_buf, cont_len);
- cont_len = 0;
- cont_task = NULL;
- printed_len = cont_len;
- } else {
- /* ordinary single and terminated line */
- log_store(facility, level,
- dict, dictlen, text, text_len);
- printed_len = text_len;
+ /*
+ * If an earlier newline was missing and it was the same task,
+ * either merge it with the current buffer and flush, or if
+ * there was a race with interrupts (prefix == true) then just
+ * flush it out and store this line separately.
+ */
+ if (cont.len && cont.owner == current) {
+ if (!(lflags & LOG_PREFIX))
+ stored = cont_add(facility, level, text, text_len);
+ cont_flush();
}
+
+ if (!stored)
+ log_store(facility, level, lflags, 0,
+ dict, dictlen, text, text_len);
}
+ printed_len += text_len;
/*
* Try to acquire and then immediately release the console semaphore.
#else
#define LOG_LINE_MAX 0
+static struct cont {
+ size_t len;
+ size_t cons;
+ u8 level;
+ bool flushed:1;
+} cont;
static struct log *log_from_idx(u32 idx) { return NULL; }
static u32 log_next(u32 idx) { return 0; }
static void call_console_drivers(int level, const char *text, size_t len) {}
-static size_t msg_print_text(const struct log *msg, bool syslog,
- char *buf, size_t size) { return 0; }
+static size_t msg_print_text(const struct log *msg, enum log_flags prev,
+ bool syslog, char *buf, size_t size) { return 0; }
+static size_t cont_print_text(char *text, size_t size) { return 0; }
#endif /* CONFIG_PRINTK */
/* the next printk record to write to the console */
static u64 console_seq;
static u32 console_idx;
+static enum log_flags console_prev;
/**
* console_unlock - unlock the console system
*/
void console_unlock(void)
{
+ static char text[LOG_LINE_MAX];
static u64 seen_seq;
unsigned long flags;
bool wake_klogd = false;
console_may_schedule = 0;
+ /* flush buffered message fragment immediately to console */
+ raw_spin_lock_irqsave(&logbuf_lock, flags);
+ if (cont.len && (cont.cons < cont.len || cont.flushed)) {
+ size_t len;
+
+ len = cont_print_text(text, sizeof(text));
+ raw_spin_unlock(&logbuf_lock);
+ stop_critical_timings();
+ call_console_drivers(cont.level, text, len);
+ start_critical_timings();
+ local_irq_restore(flags);
+ } else
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+
again:
for (;;) {
struct log *msg;
- static char text[LOG_LINE_MAX];
size_t len;
int level;
/* messages are gone, move to first one */
console_seq = log_first_seq;
console_idx = log_first_idx;
+ console_prev = 0;
}
-
+skip:
if (console_seq == log_next_seq)
break;
msg = log_from_idx(console_idx);
- level = msg->level & 7;
-
- len = msg_print_text(msg, false, text, sizeof(text));
+ if (msg->flags & LOG_NOCONS) {
+ /*
+ * Skip record we have buffered and already printed
+ * directly to the console when we received it.
+ */
+ console_idx = log_next(console_idx);
+ console_seq++;
+ /*
+ * We will get here again when we register a new
+ * CON_PRINTBUFFER console. Clear the flag so we
+ * will properly dump everything later.
+ */
+ msg->flags &= ~LOG_NOCONS;
+ goto skip;
+ }
+ level = msg->level;
+ len = msg_print_text(msg, console_prev, false,
+ text, sizeof(text));
console_idx = log_next(console_idx);
console_seq++;
+ console_prev = msg->flags;
raw_spin_unlock(&logbuf_lock);
stop_critical_timings(); /* don't trace print latency */
raw_spin_lock_irqsave(&logbuf_lock, flags);
console_seq = syslog_seq;
console_idx = syslog_idx;
+ console_prev = syslog_prev;
raw_spin_unlock_irqrestore(&logbuf_lock, flags);
/*
* We're about to replay the log buffer. Only do this to the
* kmsg_dump - dump kernel log to kernel message dumpers.
* @reason: the reason (oops, panic etc) for dumping
*
- * Iterate through each of the dump devices and call the oops/panic
- * callbacks with the log buffer.
+ * Call each of the registered dumper's dump() callback, which can
+ * retrieve the kmsg records with kmsg_dump_get_line() or
+ * kmsg_dump_get_buffer().
*/
void kmsg_dump(enum kmsg_dump_reason reason)
{
- u64 idx;
struct kmsg_dumper *dumper;
- const char *s1, *s2;
- unsigned long l1, l2;
unsigned long flags;
if ((reason > KMSG_DUMP_OOPS) && !always_kmsg_dump)
return;
- /* Theoretically, the log could move on after we do this, but
- there's not a lot we can do about that. The new messages
- will overwrite the start of what we dump. */
+ rcu_read_lock();
+ list_for_each_entry_rcu(dumper, &dump_list, list) {
+ if (dumper->max_reason && reason > dumper->max_reason)
+ continue;
+
+ /* initialize iterator with data about the stored records */
+ dumper->active = true;
+
+ raw_spin_lock_irqsave(&logbuf_lock, flags);
+ dumper->cur_seq = clear_seq;
+ dumper->cur_idx = clear_idx;
+ dumper->next_seq = log_next_seq;
+ dumper->next_idx = log_next_idx;
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+
+ /* invoke dumper which will iterate over records */
+ dumper->dump(dumper, reason);
+
+ /* reset iterator */
+ dumper->active = false;
+ }
+ rcu_read_unlock();
+}
+
+/**
+ * kmsg_dump_get_line_nolock - retrieve one kmsg log line (unlocked version)
+ * @dumper: registered kmsg dumper
+ * @syslog: include the "<4>" prefixes
+ * @line: buffer to copy the line to
+ * @size: maximum size of the buffer
+ * @len: length of line placed into buffer
+ *
+ * Start at the beginning of the kmsg buffer, with the oldest kmsg
+ * record, and copy one record into the provided buffer.
+ *
+ * Consecutive calls will return the next available record moving
+ * towards the end of the buffer with the youngest messages.
+ *
+ * A return value of FALSE indicates that there are no more records to
+ * read.
+ *
+ * The function is similar to kmsg_dump_get_line(), but grabs no locks.
+ */
+bool kmsg_dump_get_line_nolock(struct kmsg_dumper *dumper, bool syslog,
+ char *line, size_t size, size_t *len)
+{
+ struct log *msg;
+ size_t l = 0;
+ bool ret = false;
+
+ if (!dumper->active)
+ goto out;
+
+ if (dumper->cur_seq < log_first_seq) {
+ /* messages are gone, move to first available one */
+ dumper->cur_seq = log_first_seq;
+ dumper->cur_idx = log_first_idx;
+ }
+
+ /* last entry */
+ if (dumper->cur_seq >= log_next_seq)
+ goto out;
+
+ msg = log_from_idx(dumper->cur_idx);
+ l = msg_print_text(msg, 0, syslog, line, size);
+
+ dumper->cur_idx = log_next(dumper->cur_idx);
+ dumper->cur_seq++;
+ ret = true;
+out:
+ if (len)
+ *len = l;
+ return ret;
+}
+
+/**
+ * kmsg_dump_get_line - retrieve one kmsg log line
+ * @dumper: registered kmsg dumper
+ * @syslog: include the "<4>" prefixes
+ * @line: buffer to copy the line to
+ * @size: maximum size of the buffer
+ * @len: length of line placed into buffer
+ *
+ * Start at the beginning of the kmsg buffer, with the oldest kmsg
+ * record, and copy one record into the provided buffer.
+ *
+ * Consecutive calls will return the next available record moving
+ * towards the end of the buffer with the youngest messages.
+ *
+ * A return value of FALSE indicates that there are no more records to
+ * read.
+ */
+bool kmsg_dump_get_line(struct kmsg_dumper *dumper, bool syslog,
+ char *line, size_t size, size_t *len)
+{
+ unsigned long flags;
+ bool ret;
+
+ raw_spin_lock_irqsave(&logbuf_lock, flags);
+ ret = kmsg_dump_get_line_nolock(dumper, syslog, line, size, len);
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(kmsg_dump_get_line);
+
+/**
+ * kmsg_dump_get_buffer - copy kmsg log lines
+ * @dumper: registered kmsg dumper
+ * @syslog: include the "<4>" prefixes
+ * @buf: buffer to copy the line to
+ * @size: maximum size of the buffer
+ * @len: length of line placed into buffer
+ *
+ * Start at the end of the kmsg buffer and fill the provided buffer
+ * with as many of the the *youngest* kmsg records that fit into it.
+ * If the buffer is large enough, all available kmsg records will be
+ * copied with a single call.
+ *
+ * Consecutive calls will fill the buffer with the next block of
+ * available older records, not including the earlier retrieved ones.
+ *
+ * A return value of FALSE indicates that there are no more records to
+ * read.
+ */
+bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog,
+ char *buf, size_t size, size_t *len)
+{
+ unsigned long flags;
+ u64 seq;
+ u32 idx;
+ u64 next_seq;
+ u32 next_idx;
+ enum log_flags prev;
+ size_t l = 0;
+ bool ret = false;
+
+ if (!dumper->active)
+ goto out;
raw_spin_lock_irqsave(&logbuf_lock, flags);
- if (syslog_seq < log_first_seq)
- idx = syslog_idx;
- else
- idx = log_first_idx;
+ if (dumper->cur_seq < log_first_seq) {
+ /* messages are gone, move to first available one */
+ dumper->cur_seq = log_first_seq;
+ dumper->cur_idx = log_first_idx;
+ }
+
+ /* last entry */
+ if (dumper->cur_seq >= dumper->next_seq) {
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+ goto out;
+ }
- if (idx > log_next_idx) {
- s1 = log_buf;
- l1 = log_next_idx;
+ /* calculate length of entire buffer */
+ seq = dumper->cur_seq;
+ idx = dumper->cur_idx;
+ prev = 0;
+ while (seq < dumper->next_seq) {
+ struct log *msg = log_from_idx(idx);
+
+ l += msg_print_text(msg, prev, true, NULL, 0);
+ idx = log_next(idx);
+ seq++;
+ prev = msg->flags;
+ }
- s2 = log_buf + idx;
- l2 = log_buf_len - idx;
- } else {
- s1 = "";
- l1 = 0;
+ /* move first record forward until length fits into the buffer */
+ seq = dumper->cur_seq;
+ idx = dumper->cur_idx;
+ prev = 0;
+ while (l > size && seq < dumper->next_seq) {
+ struct log *msg = log_from_idx(idx);
+
+ l -= msg_print_text(msg, prev, true, NULL, 0);
+ idx = log_next(idx);
+ seq++;
+ prev = msg->flags;
+ }
+
+ /* last message in next interation */
+ next_seq = seq;
+ next_idx = idx;
+
+ l = 0;
+ prev = 0;
+ while (seq < dumper->next_seq) {
+ struct log *msg = log_from_idx(idx);
- s2 = log_buf + idx;
- l2 = log_next_idx - idx;
+ l += msg_print_text(msg, prev, syslog, buf + l, size - l);
+ idx = log_next(idx);
+ seq++;
+ prev = msg->flags;
}
+
+ dumper->next_seq = next_seq;
+ dumper->next_idx = next_idx;
+ ret = true;
raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+out:
+ if (len)
+ *len = l;
+ return ret;
+}
+EXPORT_SYMBOL_GPL(kmsg_dump_get_buffer);
- rcu_read_lock();
- list_for_each_entry_rcu(dumper, &dump_list, list)
- dumper->dump(dumper, reason, s1, l1, s2, l2);
- rcu_read_unlock();
+/**
+ * kmsg_dump_rewind_nolock - reset the interator (unlocked version)
+ * @dumper: registered kmsg dumper
+ *
+ * Reset the dumper's iterator so that kmsg_dump_get_line() and
+ * kmsg_dump_get_buffer() can be called again and used multiple
+ * times within the same dumper.dump() callback.
+ *
+ * The function is similar to kmsg_dump_rewind(), but grabs no locks.
+ */
+void kmsg_dump_rewind_nolock(struct kmsg_dumper *dumper)
+{
+ dumper->cur_seq = clear_seq;
+ dumper->cur_idx = clear_idx;
+ dumper->next_seq = log_next_seq;
+ dumper->next_idx = log_next_idx;
+}
+
+/**
+ * kmsg_dump_rewind - reset the interator
+ * @dumper: registered kmsg dumper
+ *
+ * Reset the dumper's iterator so that kmsg_dump_get_line() and
+ * kmsg_dump_get_buffer() can be called again and used multiple
+ * times within the same dumper.dump() callback.
+ */
+void kmsg_dump_rewind(struct kmsg_dumper *dumper)
+{
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&logbuf_lock, flags);
+ kmsg_dump_rewind_nolock(dumper);
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
}
+EXPORT_SYMBOL_GPL(kmsg_dump_rewind);
#endif
{
trace_rcu_utilization("Start context switch");
rcu_sched_qs(cpu);
+ rcu_preempt_note_context_switch(cpu);
trace_rcu_utilization("End context switch");
}
EXPORT_SYMBOL_GPL(rcu_note_context_switch);
rdp->qlen_lazy += rsp->qlen_lazy;
rdp->qlen += rsp->qlen;
rdp->n_cbs_adopted += rsp->qlen;
+ if (rsp->qlen_lazy != rsp->qlen)
+ rcu_idle_count_callbacks_posted();
rsp->qlen_lazy = 0;
rsp->qlen = 0;
{
unsigned long flags;
struct rcu_head *next, *list, **tail;
- int bl, count, count_lazy;
+ int bl, count, count_lazy, i;
/* If no callbacks are ready, just return.*/
if (!cpu_has_callbacks_ready_to_invoke(rdp)) {
rdp->nxtlist = *rdp->nxttail[RCU_DONE_TAIL];
*rdp->nxttail[RCU_DONE_TAIL] = NULL;
tail = rdp->nxttail[RCU_DONE_TAIL];
- for (count = RCU_NEXT_SIZE - 1; count >= 0; count--)
- if (rdp->nxttail[count] == rdp->nxttail[RCU_DONE_TAIL])
- rdp->nxttail[count] = &rdp->nxtlist;
+ for (i = RCU_NEXT_SIZE - 1; i >= 0; i--)
+ if (rdp->nxttail[i] == rdp->nxttail[RCU_DONE_TAIL])
+ rdp->nxttail[i] = &rdp->nxtlist;
local_irq_restore(flags);
/* Invoke callbacks. */
if (list != NULL) {
*tail = rdp->nxtlist;
rdp->nxtlist = list;
- for (count = 0; count < RCU_NEXT_SIZE; count++)
- if (&rdp->nxtlist == rdp->nxttail[count])
- rdp->nxttail[count] = tail;
+ for (i = 0; i < RCU_NEXT_SIZE; i++)
+ if (&rdp->nxtlist == rdp->nxttail[i])
+ rdp->nxttail[i] = tail;
else
break;
}
/* Process level is worth LLONG_MAX/2. */
int dynticks_nmi_nesting; /* Track NMI nesting level. */
atomic_t dynticks; /* Even value for idle, else odd. */
+#ifdef CONFIG_RCU_FAST_NO_HZ
+ int dyntick_drain; /* Prepare-for-idle state variable. */
+ unsigned long dyntick_holdoff;
+ /* No retries for the jiffy of failure. */
+ struct timer_list idle_gp_timer;
+ /* Wake up CPU sleeping with callbacks. */
+ unsigned long idle_gp_timer_expires;
+ /* When to wake up CPU (for repost). */
+ bool idle_first_pass; /* First pass of attempt to go idle? */
+ unsigned long nonlazy_posted;
+ /* # times non-lazy CBs posted to CPU. */
+ unsigned long nonlazy_posted_snap;
+ /* idle-period nonlazy_posted snapshot. */
+#endif /* #ifdef CONFIG_RCU_FAST_NO_HZ */
};
/* RCU's kthread states for tracing. */
/* Forward declarations for rcutree_plugin.h */
static void rcu_bootup_announce(void);
long rcu_batches_completed(void);
+static void rcu_preempt_note_context_switch(int cpu);
static int rcu_preempt_blocked_readers_cgp(struct rcu_node *rnp);
#ifdef CONFIG_HOTPLUG_CPU
static void rcu_report_unblock_qs_rnp(struct rcu_node *rnp,
*
* Caller must disable preemption.
*/
-void rcu_preempt_note_context_switch(void)
+static void rcu_preempt_note_context_switch(int cpu)
{
struct task_struct *t = current;
unsigned long flags;
(t->rcu_read_unlock_special & RCU_READ_UNLOCK_BLOCKED) == 0) {
/* Possibly blocking in an RCU read-side critical section. */
- rdp = __this_cpu_ptr(rcu_preempt_state.rda);
+ rdp = per_cpu_ptr(rcu_preempt_state.rda, cpu);
rnp = rdp->mynode;
raw_spin_lock_irqsave(&rnp->lock, flags);
t->rcu_read_unlock_special |= RCU_READ_UNLOCK_BLOCKED;
* means that we continue to block the current grace period.
*/
local_irq_save(flags);
- rcu_preempt_qs(smp_processor_id());
+ rcu_preempt_qs(cpu);
local_irq_restore(flags);
}
}
EXPORT_SYMBOL_GPL(rcu_force_quiescent_state);
+/*
+ * Because preemptible RCU does not exist, we never have to check for
+ * CPUs being in quiescent states.
+ */
+static void rcu_preempt_note_context_switch(int cpu)
+{
+}
+
/*
* Because preemptible RCU does not exist, there are never any preempted
* RCU readers.
* Because we not have RCU_FAST_NO_HZ, just check whether this CPU needs
* any flavor of RCU.
*/
-int rcu_needs_cpu(int cpu)
+int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies)
{
+ *delta_jiffies = ULONG_MAX;
return rcu_cpu_has_callbacks(cpu);
}
#define RCU_IDLE_GP_DELAY 6 /* Roughly one grace period. */
#define RCU_IDLE_LAZY_GP_DELAY (6 * HZ) /* Roughly six seconds. */
-/* Loop counter for rcu_prepare_for_idle(). */
-static DEFINE_PER_CPU(int, rcu_dyntick_drain);
-/* If rcu_dyntick_holdoff==jiffies, don't try to enter dyntick-idle mode. */
-static DEFINE_PER_CPU(unsigned long, rcu_dyntick_holdoff);
-/* Timer to awaken the CPU if it enters dyntick-idle mode with callbacks. */
-static DEFINE_PER_CPU(struct timer_list, rcu_idle_gp_timer);
-/* Scheduled expiry time for rcu_idle_gp_timer to allow reposting. */
-static DEFINE_PER_CPU(unsigned long, rcu_idle_gp_timer_expires);
-/* Enable special processing on first attempt to enter dyntick-idle mode. */
-static DEFINE_PER_CPU(bool, rcu_idle_first_pass);
-/* Running count of non-lazy callbacks posted, never decremented. */
-static DEFINE_PER_CPU(unsigned long, rcu_nonlazy_posted);
-/* Snapshot of rcu_nonlazy_posted to detect meaningful exits from idle. */
-static DEFINE_PER_CPU(unsigned long, rcu_nonlazy_posted_snap);
-
-/*
- * Allow the CPU to enter dyntick-idle mode if either: (1) There are no
- * callbacks on this CPU, (2) this CPU has not yet attempted to enter
- * dyntick-idle mode, or (3) this CPU is in the process of attempting to
- * enter dyntick-idle mode. Otherwise, if we have recently tried and failed
- * to enter dyntick-idle mode, we refuse to try to enter it. After all,
- * it is better to incur scheduling-clock interrupts than to spin
- * continuously for the same time duration!
- */
-int rcu_needs_cpu(int cpu)
-{
- /* Flag a new idle sojourn to the idle-entry state machine. */
- per_cpu(rcu_idle_first_pass, cpu) = 1;
- /* If no callbacks, RCU doesn't need the CPU. */
- if (!rcu_cpu_has_callbacks(cpu))
- return 0;
- /* Otherwise, RCU needs the CPU only if it recently tried and failed. */
- return per_cpu(rcu_dyntick_holdoff, cpu) == jiffies;
-}
-
/*
* Does the specified flavor of RCU have non-lazy callbacks pending on
* the specified CPU? Both RCU flavor and CPU are specified by the
rcu_preempt_cpu_has_nonlazy_callbacks(cpu);
}
+/*
+ * Allow the CPU to enter dyntick-idle mode if either: (1) There are no
+ * callbacks on this CPU, (2) this CPU has not yet attempted to enter
+ * dyntick-idle mode, or (3) this CPU is in the process of attempting to
+ * enter dyntick-idle mode. Otherwise, if we have recently tried and failed
+ * to enter dyntick-idle mode, we refuse to try to enter it. After all,
+ * it is better to incur scheduling-clock interrupts than to spin
+ * continuously for the same time duration!
+ *
+ * The delta_jiffies argument is used to store the time when RCU is
+ * going to need the CPU again if it still has callbacks. The reason
+ * for this is that rcu_prepare_for_idle() might need to post a timer,
+ * but if so, it will do so after tick_nohz_stop_sched_tick() has set
+ * the wakeup time for this CPU. This means that RCU's timer can be
+ * delayed until the wakeup time, which defeats the purpose of posting
+ * a timer.
+ */
+int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies)
+{
+ struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu);
+
+ /* Flag a new idle sojourn to the idle-entry state machine. */
+ rdtp->idle_first_pass = 1;
+ /* If no callbacks, RCU doesn't need the CPU. */
+ if (!rcu_cpu_has_callbacks(cpu)) {
+ *delta_jiffies = ULONG_MAX;
+ return 0;
+ }
+ if (rdtp->dyntick_holdoff == jiffies) {
+ /* RCU recently tried and failed, so don't try again. */
+ *delta_jiffies = 1;
+ return 1;
+ }
+ /* Set up for the possibility that RCU will post a timer. */
+ if (rcu_cpu_has_nonlazy_callbacks(cpu))
+ *delta_jiffies = RCU_IDLE_GP_DELAY;
+ else
+ *delta_jiffies = RCU_IDLE_LAZY_GP_DELAY;
+ return 0;
+}
+
/*
* Handler for smp_call_function_single(). The only point of this
* handler is to wake the CPU up, so the handler does only tracing.
*/
static void rcu_prepare_for_idle_init(int cpu)
{
- per_cpu(rcu_dyntick_holdoff, cpu) = jiffies - 1;
- setup_timer(&per_cpu(rcu_idle_gp_timer, cpu),
- rcu_idle_gp_timer_func, cpu);
- per_cpu(rcu_idle_gp_timer_expires, cpu) = jiffies - 1;
- per_cpu(rcu_idle_first_pass, cpu) = 1;
+ struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu);
+
+ rdtp->dyntick_holdoff = jiffies - 1;
+ setup_timer(&rdtp->idle_gp_timer, rcu_idle_gp_timer_func, cpu);
+ rdtp->idle_gp_timer_expires = jiffies - 1;
+ rdtp->idle_first_pass = 1;
}
/*
* Clean up for exit from idle. Because we are exiting from idle, there
- * is no longer any point to rcu_idle_gp_timer, so cancel it. This will
+ * is no longer any point to ->idle_gp_timer, so cancel it. This will
* do nothing if this timer is not active, so just cancel it unconditionally.
*/
static void rcu_cleanup_after_idle(int cpu)
{
- del_timer(&per_cpu(rcu_idle_gp_timer, cpu));
+ struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu);
+
+ del_timer(&rdtp->idle_gp_timer);
trace_rcu_prep_idle("Cleanup after idle");
}
* Because it is not legal to invoke rcu_process_callbacks() with irqs
* disabled, we do one pass of force_quiescent_state(), then do a
* invoke_rcu_core() to cause rcu_process_callbacks() to be invoked
- * later. The per-cpu rcu_dyntick_drain variable controls the sequencing.
+ * later. The ->dyntick_drain field controls the sequencing.
*
* The caller must have disabled interrupts.
*/
static void rcu_prepare_for_idle(int cpu)
{
struct timer_list *tp;
+ struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu);
/*
* If this is an idle re-entry, for example, due to use of
* RCU_NONIDLE() or the new idle-loop tracing API within the idle
* loop, then don't take any state-machine actions, unless the
* momentary exit from idle queued additional non-lazy callbacks.
- * Instead, repost the rcu_idle_gp_timer if this CPU has callbacks
+ * Instead, repost the ->idle_gp_timer if this CPU has callbacks
* pending.
*/
- if (!per_cpu(rcu_idle_first_pass, cpu) &&
- (per_cpu(rcu_nonlazy_posted, cpu) ==
- per_cpu(rcu_nonlazy_posted_snap, cpu))) {
+ if (!rdtp->idle_first_pass &&
+ (rdtp->nonlazy_posted == rdtp->nonlazy_posted_snap)) {
if (rcu_cpu_has_callbacks(cpu)) {
- tp = &per_cpu(rcu_idle_gp_timer, cpu);
- mod_timer_pinned(tp, per_cpu(rcu_idle_gp_timer_expires, cpu));
+ tp = &rdtp->idle_gp_timer;
+ mod_timer_pinned(tp, rdtp->idle_gp_timer_expires);
}
return;
}
- per_cpu(rcu_idle_first_pass, cpu) = 0;
- per_cpu(rcu_nonlazy_posted_snap, cpu) =
- per_cpu(rcu_nonlazy_posted, cpu) - 1;
+ rdtp->idle_first_pass = 0;
+ rdtp->nonlazy_posted_snap = rdtp->nonlazy_posted - 1;
/*
* If there are no callbacks on this CPU, enter dyntick-idle mode.
* Also reset state to avoid prejudicing later attempts.
*/
if (!rcu_cpu_has_callbacks(cpu)) {
- per_cpu(rcu_dyntick_holdoff, cpu) = jiffies - 1;
- per_cpu(rcu_dyntick_drain, cpu) = 0;
+ rdtp->dyntick_holdoff = jiffies - 1;
+ rdtp->dyntick_drain = 0;
trace_rcu_prep_idle("No callbacks");
return;
}
* If in holdoff mode, just return. We will presumably have
* refrained from disabling the scheduling-clock tick.
*/
- if (per_cpu(rcu_dyntick_holdoff, cpu) == jiffies) {
+ if (rdtp->dyntick_holdoff == jiffies) {
trace_rcu_prep_idle("In holdoff");
return;
}
- /* Check and update the rcu_dyntick_drain sequencing. */
- if (per_cpu(rcu_dyntick_drain, cpu) <= 0) {
+ /* Check and update the ->dyntick_drain sequencing. */
+ if (rdtp->dyntick_drain <= 0) {
/* First time through, initialize the counter. */
- per_cpu(rcu_dyntick_drain, cpu) = RCU_IDLE_FLUSHES;
- } else if (per_cpu(rcu_dyntick_drain, cpu) <= RCU_IDLE_OPT_FLUSHES &&
+ rdtp->dyntick_drain = RCU_IDLE_FLUSHES;
+ } else if (rdtp->dyntick_drain <= RCU_IDLE_OPT_FLUSHES &&
!rcu_pending(cpu) &&
!local_softirq_pending()) {
/* Can we go dyntick-idle despite still having callbacks? */
- trace_rcu_prep_idle("Dyntick with callbacks");
- per_cpu(rcu_dyntick_drain, cpu) = 0;
- per_cpu(rcu_dyntick_holdoff, cpu) = jiffies;
- if (rcu_cpu_has_nonlazy_callbacks(cpu))
- per_cpu(rcu_idle_gp_timer_expires, cpu) =
+ rdtp->dyntick_drain = 0;
+ rdtp->dyntick_holdoff = jiffies;
+ if (rcu_cpu_has_nonlazy_callbacks(cpu)) {
+ trace_rcu_prep_idle("Dyntick with callbacks");
+ rdtp->idle_gp_timer_expires =
jiffies + RCU_IDLE_GP_DELAY;
- else
- per_cpu(rcu_idle_gp_timer_expires, cpu) =
+ } else {
+ rdtp->idle_gp_timer_expires =
jiffies + RCU_IDLE_LAZY_GP_DELAY;
- tp = &per_cpu(rcu_idle_gp_timer, cpu);
- mod_timer_pinned(tp, per_cpu(rcu_idle_gp_timer_expires, cpu));
- per_cpu(rcu_nonlazy_posted_snap, cpu) =
- per_cpu(rcu_nonlazy_posted, cpu);
+ trace_rcu_prep_idle("Dyntick with lazy callbacks");
+ }
+ tp = &rdtp->idle_gp_timer;
+ mod_timer_pinned(tp, rdtp->idle_gp_timer_expires);
+ rdtp->nonlazy_posted_snap = rdtp->nonlazy_posted;
return; /* Nothing more to do immediately. */
- } else if (--per_cpu(rcu_dyntick_drain, cpu) <= 0) {
+ } else if (--(rdtp->dyntick_drain) <= 0) {
/* We have hit the limit, so time to give up. */
- per_cpu(rcu_dyntick_holdoff, cpu) = jiffies;
+ rdtp->dyntick_holdoff = jiffies;
trace_rcu_prep_idle("Begin holdoff");
invoke_rcu_core(); /* Force the CPU out of dyntick-idle. */
return;
*/
static void rcu_idle_count_callbacks_posted(void)
{
- __this_cpu_add(rcu_nonlazy_posted, 1);
+ __this_cpu_add(rcu_dynticks.nonlazy_posted, 1);
}
#endif /* #else #if !defined(CONFIG_RCU_FAST_NO_HZ) */
static void print_cpu_stall_fast_no_hz(char *cp, int cpu)
{
- struct timer_list *tltp = &per_cpu(rcu_idle_gp_timer, cpu);
+ struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu);
+ struct timer_list *tltp = &rdtp->idle_gp_timer;
sprintf(cp, "drain=%d %c timer=%lu",
- per_cpu(rcu_dyntick_drain, cpu),
- per_cpu(rcu_dyntick_holdoff, cpu) == jiffies ? 'H' : '.',
+ rdtp->dyntick_drain,
+ rdtp->dyntick_holdoff == jiffies ? 'H' : '.',
timer_pending(tltp) ? tltp->expires - jiffies : -1);
}
struct splice_pipe_desc spd = {
.pages = pages,
.nr_pages = 0,
+ .nr_pages_max = PIPE_DEF_BUFFERS,
.partial = partial,
.flags = flags,
.ops = &relay_pipe_buf_ops,
ret += padding;
out:
- splice_shrink_spd(pipe, &spd);
- return ret;
+ splice_shrink_spd(&spd);
+ return ret;
}
static ssize_t relay_file_splice_read(struct file *in,
#define SCHED_FEAT(name, enabled) \
#name ,
-static __read_mostly char *sched_feat_names[] = {
+static const char * const sched_feat_names[] = {
#include "features.h"
- NULL
};
#undef SCHED_FEAT
#endif
/* Here we just switch the register state and the stack. */
- rcu_switch_from(prev);
switch_to(prev, next, prev);
barrier();
}
+/*
+ * Global load-average calculations
+ *
+ * We take a distributed and async approach to calculating the global load-avg
+ * in order to minimize overhead.
+ *
+ * The global load average is an exponentially decaying average of nr_running +
+ * nr_uninterruptible.
+ *
+ * Once every LOAD_FREQ:
+ *
+ * nr_active = 0;
+ * for_each_possible_cpu(cpu)
+ * nr_active += cpu_of(cpu)->nr_running + cpu_of(cpu)->nr_uninterruptible;
+ *
+ * avenrun[n] = avenrun[0] * exp_n + nr_active * (1 - exp_n)
+ *
+ * Due to a number of reasons the above turns in the mess below:
+ *
+ * - for_each_possible_cpu() is prohibitively expensive on machines with
+ * serious number of cpus, therefore we need to take a distributed approach
+ * to calculating nr_active.
+ *
+ * \Sum_i x_i(t) = \Sum_i x_i(t) - x_i(t_0) | x_i(t_0) := 0
+ * = \Sum_i { \Sum_j=1 x_i(t_j) - x_i(t_j-1) }
+ *
+ * So assuming nr_active := 0 when we start out -- true per definition, we
+ * can simply take per-cpu deltas and fold those into a global accumulate
+ * to obtain the same result. See calc_load_fold_active().
+ *
+ * Furthermore, in order to avoid synchronizing all per-cpu delta folding
+ * across the machine, we assume 10 ticks is sufficient time for every
+ * cpu to have completed this task.
+ *
+ * This places an upper-bound on the IRQ-off latency of the machine. Then
+ * again, being late doesn't loose the delta, just wrecks the sample.
+ *
+ * - cpu_rq()->nr_uninterruptible isn't accurately tracked per-cpu because
+ * this would add another cross-cpu cacheline miss and atomic operation
+ * to the wakeup path. Instead we increment on whatever cpu the task ran
+ * when it went into uninterruptible state and decrement on whatever cpu
+ * did the wakeup. This means that only the sum of nr_uninterruptible over
+ * all cpus yields the correct result.
+ *
+ * This covers the NO_HZ=n code, for extra head-aches, see the comment below.
+ */
+
/* Variables and functions for calc_load */
static atomic_long_t calc_load_tasks;
static unsigned long calc_load_update;
unsigned long avenrun[3];
-EXPORT_SYMBOL(avenrun);
+EXPORT_SYMBOL(avenrun); /* should be removed */
+
+/**
+ * get_avenrun - get the load average array
+ * @loads: pointer to dest load array
+ * @offset: offset to add
+ * @shift: shift count to shift the result left
+ *
+ * These values are estimates at best, so no need for locking.
+ */
+void get_avenrun(unsigned long *loads, unsigned long offset, int shift)
+{
+ loads[0] = (avenrun[0] + offset) << shift;
+ loads[1] = (avenrun[1] + offset) << shift;
+ loads[2] = (avenrun[2] + offset) << shift;
+}
static long calc_load_fold_active(struct rq *this_rq)
{
return delta;
}
+/*
+ * a1 = a0 * e + a * (1 - e)
+ */
static unsigned long
calc_load(unsigned long load, unsigned long exp, unsigned long active)
{
#ifdef CONFIG_NO_HZ
/*
- * For NO_HZ we delay the active fold to the next LOAD_FREQ update.
+ * Handle NO_HZ for the global load-average.
+ *
+ * Since the above described distributed algorithm to compute the global
+ * load-average relies on per-cpu sampling from the tick, it is affected by
+ * NO_HZ.
+ *
+ * The basic idea is to fold the nr_active delta into a global idle-delta upon
+ * entering NO_HZ state such that we can include this as an 'extra' cpu delta
+ * when we read the global state.
+ *
+ * Obviously reality has to ruin such a delightfully simple scheme:
+ *
+ * - When we go NO_HZ idle during the window, we can negate our sample
+ * contribution, causing under-accounting.
+ *
+ * We avoid this by keeping two idle-delta counters and flipping them
+ * when the window starts, thus separating old and new NO_HZ load.
+ *
+ * The only trick is the slight shift in index flip for read vs write.
+ *
+ * 0s 5s 10s 15s
+ * +10 +10 +10 +10
+ * |-|-----------|-|-----------|-|-----------|-|
+ * r:0 0 1 1 0 0 1 1 0
+ * w:0 1 1 0 0 1 1 0 0
+ *
+ * This ensures we'll fold the old idle contribution in this window while
+ * accumlating the new one.
+ *
+ * - When we wake up from NO_HZ idle during the window, we push up our
+ * contribution, since we effectively move our sample point to a known
+ * busy state.
+ *
+ * This is solved by pushing the window forward, and thus skipping the
+ * sample, for this cpu (effectively using the idle-delta for this cpu which
+ * was in effect at the time the window opened). This also solves the issue
+ * of having to deal with a cpu having been in NOHZ idle for multiple
+ * LOAD_FREQ intervals.
*
* When making the ILB scale, we should try to pull this in as well.
*/
-static atomic_long_t calc_load_tasks_idle;
+static atomic_long_t calc_load_idle[2];
+static int calc_load_idx;
+
+static inline int calc_load_write_idx(void)
+{
+ int idx = calc_load_idx;
+
+ /*
+ * See calc_global_nohz(), if we observe the new index, we also
+ * need to observe the new update time.
+ */
+ smp_rmb();
+
+ /*
+ * If the folding window started, make sure we start writing in the
+ * next idle-delta.
+ */
+ if (!time_before(jiffies, calc_load_update))
+ idx++;
-void calc_load_account_idle(struct rq *this_rq)
+ return idx & 1;
+}
+
+static inline int calc_load_read_idx(void)
{
+ return calc_load_idx & 1;
+}
+
+void calc_load_enter_idle(void)
+{
+ struct rq *this_rq = this_rq();
long delta;
+ /*
+ * We're going into NOHZ mode, if there's any pending delta, fold it
+ * into the pending idle delta.
+ */
delta = calc_load_fold_active(this_rq);
- if (delta)
- atomic_long_add(delta, &calc_load_tasks_idle);
+ if (delta) {
+ int idx = calc_load_write_idx();
+ atomic_long_add(delta, &calc_load_idle[idx]);
+ }
}
-static long calc_load_fold_idle(void)
+void calc_load_exit_idle(void)
{
- long delta = 0;
+ struct rq *this_rq = this_rq();
/*
- * Its got a race, we don't care...
+ * If we're still before the sample window, we're done.
*/
- if (atomic_long_read(&calc_load_tasks_idle))
- delta = atomic_long_xchg(&calc_load_tasks_idle, 0);
+ if (time_before(jiffies, this_rq->calc_load_update))
+ return;
+
+ /*
+ * We woke inside or after the sample window, this means we're already
+ * accounted through the nohz accounting, so skip the entire deal and
+ * sync up for the next window.
+ */
+ this_rq->calc_load_update = calc_load_update;
+ if (time_before(jiffies, this_rq->calc_load_update + 10))
+ this_rq->calc_load_update += LOAD_FREQ;
+}
+
+static long calc_load_fold_idle(void)
+{
+ int idx = calc_load_read_idx();
+ long delta = 0;
+
+ if (atomic_long_read(&calc_load_idle[idx]))
+ delta = atomic_long_xchg(&calc_load_idle[idx], 0);
return delta;
}
{
long delta, active, n;
- /*
- * If we crossed a calc_load_update boundary, make sure to fold
- * any pending idle changes, the respective CPUs might have
- * missed the tick driven calc_load_account_active() update
- * due to NO_HZ.
- */
- delta = calc_load_fold_idle();
- if (delta)
- atomic_long_add(delta, &calc_load_tasks);
-
- /*
- * It could be the one fold was all it took, we done!
- */
- if (time_before(jiffies, calc_load_update + 10))
- return;
-
- /*
- * Catch-up, fold however many we are behind still
- */
- delta = jiffies - calc_load_update - 10;
- n = 1 + (delta / LOAD_FREQ);
+ if (!time_before(jiffies, calc_load_update + 10)) {
+ /*
+ * Catch-up, fold however many we are behind still
+ */
+ delta = jiffies - calc_load_update - 10;
+ n = 1 + (delta / LOAD_FREQ);
- active = atomic_long_read(&calc_load_tasks);
- active = active > 0 ? active * FIXED_1 : 0;
+ active = atomic_long_read(&calc_load_tasks);
+ active = active > 0 ? active * FIXED_1 : 0;
- avenrun[0] = calc_load_n(avenrun[0], EXP_1, active, n);
- avenrun[1] = calc_load_n(avenrun[1], EXP_5, active, n);
- avenrun[2] = calc_load_n(avenrun[2], EXP_15, active, n);
+ avenrun[0] = calc_load_n(avenrun[0], EXP_1, active, n);
+ avenrun[1] = calc_load_n(avenrun[1], EXP_5, active, n);
+ avenrun[2] = calc_load_n(avenrun[2], EXP_15, active, n);
- calc_load_update += n * LOAD_FREQ;
-}
-#else
-void calc_load_account_idle(struct rq *this_rq)
-{
-}
+ calc_load_update += n * LOAD_FREQ;
+ }
-static inline long calc_load_fold_idle(void)
-{
- return 0;
+ /*
+ * Flip the idle index...
+ *
+ * Make sure we first write the new time then flip the index, so that
+ * calc_load_write_idx() will see the new time when it reads the new
+ * index, this avoids a double flip messing things up.
+ */
+ smp_wmb();
+ calc_load_idx++;
}
+#else /* !CONFIG_NO_HZ */
-static void calc_global_nohz(void)
-{
-}
-#endif
+static inline long calc_load_fold_idle(void) { return 0; }
+static inline void calc_global_nohz(void) { }
-/**
- * get_avenrun - get the load average array
- * @loads: pointer to dest load array
- * @offset: offset to add
- * @shift: shift count to shift the result left
- *
- * These values are estimates at best, so no need for locking.
- */
-void get_avenrun(unsigned long *loads, unsigned long offset, int shift)
-{
- loads[0] = (avenrun[0] + offset) << shift;
- loads[1] = (avenrun[1] + offset) << shift;
- loads[2] = (avenrun[2] + offset) << shift;
-}
+#endif /* CONFIG_NO_HZ */
/*
* calc_load - update the avenrun load estimates 10 ticks after the
*/
void calc_global_load(unsigned long ticks)
{
- long active;
+ long active, delta;
if (time_before(jiffies, calc_load_update + 10))
return;
+ /*
+ * Fold the 'old' idle-delta to include all NO_HZ cpus.
+ */
+ delta = calc_load_fold_idle();
+ if (delta)
+ atomic_long_add(delta, &calc_load_tasks);
+
active = atomic_long_read(&calc_load_tasks);
active = active > 0 ? active * FIXED_1 : 0;
calc_load_update += LOAD_FREQ;
/*
- * Account one period with whatever state we found before
- * folding in the nohz state and ageing the entire idle period.
- *
- * This avoids loosing a sample when we go idle between
- * calc_load_account_active() (10 ticks ago) and now and thus
- * under-accounting.
+ * In case we idled for multiple LOAD_FREQ intervals, catch up in bulk.
*/
calc_global_nohz();
}
return;
delta = calc_load_fold_active(this_rq);
- delta += calc_load_fold_idle();
if (delta)
atomic_long_add(delta, &calc_load_tasks);
this_rq->calc_load_update += LOAD_FREQ;
}
+/*
+ * End of global load-average stuff
+ */
+
/*
* The exact cpuload at various idx values, calculated at every tick would be
* load = (2^idx - 1) / 2^idx * load + 1 / 2^idx * cur_load
sched_avg_update(this_rq);
}
+#ifdef CONFIG_NO_HZ
+/*
+ * There is no sane way to deal with nohz on smp when using jiffies because the
+ * cpu doing the jiffies update might drift wrt the cpu doing the jiffy reading
+ * causing off-by-one errors in observed deltas; {0,2} instead of {1,1}.
+ *
+ * Therefore we cannot use the delta approach from the regular tick since that
+ * would seriously skew the load calculation. However we'll make do for those
+ * updates happening while idle (nohz_idle_balance) or coming out of idle
+ * (tick_nohz_idle_exit).
+ *
+ * This means we might still be one tick off for nohz periods.
+ */
+
/*
* Called from nohz_idle_balance() to update the load ratings before doing the
* idle balance.
*/
void update_idle_cpu_load(struct rq *this_rq)
{
- unsigned long curr_jiffies = jiffies;
+ unsigned long curr_jiffies = ACCESS_ONCE(jiffies);
unsigned long load = this_rq->load.weight;
unsigned long pending_updates;
/*
- * Bloody broken means of dealing with nohz, but better than nothing..
- * jiffies is updated by one cpu, another cpu can drift wrt the jiffy
- * update and see 0 difference the one time and 2 the next, even though
- * we ticked at roughtly the same rate.
- *
- * Hence we only use this from nohz_idle_balance() and skip this
- * nonsense when called from the scheduler_tick() since that's
- * guaranteed a stable rate.
+ * bail if there's load or we're actually up-to-date.
*/
if (load || curr_jiffies == this_rq->last_load_update_tick)
return;
__update_cpu_load(this_rq, load, pending_updates);
}
+/*
+ * Called from tick_nohz_idle_exit() -- try and fix up the ticks we missed.
+ */
+void update_cpu_load_nohz(void)
+{
+ struct rq *this_rq = this_rq();
+ unsigned long curr_jiffies = ACCESS_ONCE(jiffies);
+ unsigned long pending_updates;
+
+ if (curr_jiffies == this_rq->last_load_update_tick)
+ return;
+
+ raw_spin_lock(&this_rq->lock);
+ pending_updates = curr_jiffies - this_rq->last_load_update_tick;
+ if (pending_updates) {
+ this_rq->last_load_update_tick = curr_jiffies;
+ /*
+ * We were idle, this means load 0, the current load might be
+ * !0 due to remote wakeups and the sort.
+ */
+ __update_cpu_load(this_rq, 0, pending_updates);
+ }
+ raw_spin_unlock(&this_rq->lock);
+}
+#endif /* CONFIG_NO_HZ */
+
/*
* Called from scheduler_tick()
*/
static void update_cpu_load_active(struct rq *this_rq)
{
/*
- * See the mess in update_idle_cpu_load().
+ * See the mess around update_idle_cpu_load() / update_cpu_load_nohz().
*/
this_rq->last_load_update_tick = jiffies;
__update_cpu_load(this_rq, this_rq->load.weight, 1);
p->sched_class->set_cpus_allowed(p, new_mask);
cpumask_copy(&p->cpus_allowed, new_mask);
- p->rt.nr_cpus_allowed = cpumask_weight(new_mask);
+ p->nr_cpus_allowed = cpumask_weight(new_mask);
}
/*
#ifdef CONFIG_SCHED_DEBUG
-static __read_mostly int sched_domain_debug_enabled;
+static __read_mostly int sched_debug_enabled;
-static int __init sched_domain_debug_setup(char *str)
+static int __init sched_debug_setup(char *str)
{
- sched_domain_debug_enabled = 1;
+ sched_debug_enabled = 1;
return 0;
}
-early_param("sched_debug", sched_domain_debug_setup);
+early_param("sched_debug", sched_debug_setup);
+
+static inline bool sched_debug(void)
+{
+ return sched_debug_enabled;
+}
static int sched_domain_debug_one(struct sched_domain *sd, int cpu, int level,
struct cpumask *groupmask)
break;
}
- if (!group->sgp->power) {
+ /*
+ * Even though we initialize ->power to something semi-sane,
+ * we leave power_orig unset. This allows us to detect if
+ * domain iteration is still funny without causing /0 traps.
+ */
+ if (!group->sgp->power_orig) {
printk(KERN_CONT "\n");
printk(KERN_ERR "ERROR: domain->cpu_power not "
"set\n");
{
int level = 0;
- if (!sched_domain_debug_enabled)
+ if (!sched_debug_enabled)
return;
if (!sd) {
}
#else /* !CONFIG_SCHED_DEBUG */
# define sched_domain_debug(sd, cpu) do { } while (0)
+static inline bool sched_debug(void)
+{
+ return false;
+}
#endif /* CONFIG_SCHED_DEBUG */
static int sd_degenerate(struct sched_domain *sd)
struct sd_data data;
};
+/*
+ * Build an iteration mask that can exclude certain CPUs from the upwards
+ * domain traversal.
+ *
+ * Asymmetric node setups can result in situations where the domain tree is of
+ * unequal depth, make sure to skip domains that already cover the entire
+ * range.
+ *
+ * In that case build_sched_domains() will have terminated the iteration early
+ * and our sibling sd spans will be empty. Domains should always include the
+ * cpu they're built on, so check that.
+ *
+ */
+static void build_group_mask(struct sched_domain *sd, struct sched_group *sg)
+{
+ const struct cpumask *span = sched_domain_span(sd);
+ struct sd_data *sdd = sd->private;
+ struct sched_domain *sibling;
+ int i;
+
+ for_each_cpu(i, span) {
+ sibling = *per_cpu_ptr(sdd->sd, i);
+ if (!cpumask_test_cpu(i, sched_domain_span(sibling)))
+ continue;
+
+ cpumask_set_cpu(i, sched_group_mask(sg));
+ }
+}
+
+/*
+ * Return the canonical balance cpu for this group, this is the first cpu
+ * of this group that's also in the iteration mask.
+ */
+int group_balance_cpu(struct sched_group *sg)
+{
+ return cpumask_first_and(sched_group_cpus(sg), sched_group_mask(sg));
+}
+
static int
build_overlap_sched_groups(struct sched_domain *sd, int cpu)
{
if (cpumask_test_cpu(i, covered))
continue;
+ child = *per_cpu_ptr(sdd->sd, i);
+
+ /* See the comment near build_group_mask(). */
+ if (!cpumask_test_cpu(i, sched_domain_span(child)))
+ continue;
+
sg = kzalloc_node(sizeof(struct sched_group) + cpumask_size(),
GFP_KERNEL, cpu_to_node(cpu));
goto fail;
sg_span = sched_group_cpus(sg);
-
- child = *per_cpu_ptr(sdd->sd, i);
if (child->child) {
child = child->child;
cpumask_copy(sg_span, sched_domain_span(child));
cpumask_or(covered, covered, sg_span);
- sg->sgp = *per_cpu_ptr(sdd->sgp, cpumask_first(sg_span));
- atomic_inc(&sg->sgp->ref);
+ sg->sgp = *per_cpu_ptr(sdd->sgp, i);
+ if (atomic_inc_return(&sg->sgp->ref) == 1)
+ build_group_mask(sd, sg);
- if (cpumask_test_cpu(cpu, sg_span))
+ /*
+ * Initialize sgp->power such that even if we mess up the
+ * domains and no possible iteration will get us here, we won't
+ * die on a /0 trap.
+ */
+ sg->sgp->power = SCHED_POWER_SCALE * cpumask_weight(sg_span);
+
+ /*
+ * Make sure the first group of this domain contains the
+ * canonical balance cpu. Otherwise the sched_domain iteration
+ * breaks. See update_sg_lb_stats().
+ */
+ if ((!groups && cpumask_test_cpu(cpu, sg_span)) ||
+ group_balance_cpu(sg) == cpu)
groups = sg;
if (!first)
cpumask_clear(sched_group_cpus(sg));
sg->sgp->power = 0;
+ cpumask_setall(sched_group_mask(sg));
for_each_cpu(j, span) {
if (get_group(j, sdd, NULL) != group)
sg = sg->next;
} while (sg != sd->groups);
- if (cpu != group_first_cpu(sg))
+ if (cpu != group_balance_cpu(sg))
return;
update_group_power(sd, cpu);
static int __init setup_relax_domain_level(char *str)
{
- unsigned long val;
-
- val = simple_strtoul(str, NULL, 0);
- if (val < sched_domain_level_max)
- default_relax_domain_level = val;
+ if (kstrtoint(str, 0, &default_relax_domain_level))
+ pr_warn("Unable to set relax_domain_level\n");
return 1;
}
#ifdef CONFIG_NUMA
static int sched_domains_numa_levels;
-static int sched_domains_numa_scale;
static int *sched_domains_numa_distance;
static struct cpumask ***sched_domains_numa_masks;
static int sched_domains_curr_level;
static inline int sd_local_flags(int level)
{
- if (sched_domains_numa_distance[level] > REMOTE_DISTANCE)
+ if (sched_domains_numa_distance[level] > RECLAIM_DISTANCE)
return 0;
return SD_BALANCE_EXEC | SD_BALANCE_FORK | SD_WAKE_AFFINE;
return sched_domains_numa_masks[sched_domains_curr_level][cpu_to_node(cpu)];
}
+static void sched_numa_warn(const char *str)
+{
+ static int done = false;
+ int i,j;
+
+ if (done)
+ return;
+
+ done = true;
+
+ printk(KERN_WARNING "ERROR: %s\n\n", str);
+
+ for (i = 0; i < nr_node_ids; i++) {
+ printk(KERN_WARNING " ");
+ for (j = 0; j < nr_node_ids; j++)
+ printk(KERN_CONT "%02d ", node_distance(i,j));
+ printk(KERN_CONT "\n");
+ }
+ printk(KERN_WARNING "\n");
+}
+
+static bool find_numa_distance(int distance)
+{
+ int i;
+
+ if (distance == node_distance(0, 0))
+ return true;
+
+ for (i = 0; i < sched_domains_numa_levels; i++) {
+ if (sched_domains_numa_distance[i] == distance)
+ return true;
+ }
+
+ return false;
+}
+
static void sched_init_numa(void)
{
int next_distance, curr_distance = node_distance(0, 0);
int level = 0;
int i, j, k;
- sched_domains_numa_scale = curr_distance;
sched_domains_numa_distance = kzalloc(sizeof(int) * nr_node_ids, GFP_KERNEL);
if (!sched_domains_numa_distance)
return;
*
* Assumes node_distance(0,j) includes all distances in
* node_distance(i,j) in order to avoid cubic time.
- *
- * XXX: could be optimized to O(n log n) by using sort()
*/
next_distance = curr_distance;
for (i = 0; i < nr_node_ids; i++) {
for (j = 0; j < nr_node_ids; j++) {
- int distance = node_distance(0, j);
- if (distance > curr_distance &&
- (distance < next_distance ||
- next_distance == curr_distance))
- next_distance = distance;
+ for (k = 0; k < nr_node_ids; k++) {
+ int distance = node_distance(i, k);
+
+ if (distance > curr_distance &&
+ (distance < next_distance ||
+ next_distance == curr_distance))
+ next_distance = distance;
+
+ /*
+ * While not a strong assumption it would be nice to know
+ * about cases where if node A is connected to B, B is not
+ * equally connected to A.
+ */
+ if (sched_debug() && node_distance(k, i) != distance)
+ sched_numa_warn("Node-distance not symmetric");
+
+ if (sched_debug() && i && !find_numa_distance(distance))
+ sched_numa_warn("Node-0 not representative");
+ }
+ if (next_distance != curr_distance) {
+ sched_domains_numa_distance[level++] = next_distance;
+ sched_domains_numa_levels = level;
+ curr_distance = next_distance;
+ } else break;
}
- if (next_distance != curr_distance) {
- sched_domains_numa_distance[level++] = next_distance;
- sched_domains_numa_levels = level;
- curr_distance = next_distance;
- } else break;
+
+ /*
+ * In case of sched_debug() we verify the above assumption.
+ */
+ if (!sched_debug())
+ break;
}
/*
* 'level' contains the number of unique distances, excluding the
return;
for (j = 0; j < nr_node_ids; j++) {
- struct cpumask *mask = kzalloc_node(cpumask_size(), GFP_KERNEL, j);
+ struct cpumask *mask = kzalloc(cpumask_size(), GFP_KERNEL);
if (!mask)
return;
*per_cpu_ptr(sdd->sg, j) = sg;
- sgp = kzalloc_node(sizeof(struct sched_group_power),
+ sgp = kzalloc_node(sizeof(struct sched_group_power) + cpumask_size(),
GFP_KERNEL, cpu_to_node(j));
if (!sgp)
return -ENOMEM;
if (!sd)
return child;
- set_domain_attribute(sd, attr);
cpumask_and(sched_domain_span(sd), cpu_map, tl->mask(cpu));
if (child) {
sd->level = child->level + 1;
child->parent = sd;
}
sd->child = child;
+ set_domain_attribute(sd, attr);
return sd;
}
if (!doms_cur)
doms_cur = &fallback_doms;
cpumask_andnot(doms_cur[0], cpu_map, cpu_isolated_map);
- dattr_cur = NULL;
err = build_sched_domains(doms_cur[0], NULL);
register_sched_domain_sysctl();
int want_sd = 1;
int sync = wake_flags & WF_SYNC;
- if (p->rt.nr_cpus_allowed == 1)
+ if (p->nr_cpus_allowed == 1)
return prev_cpu;
if (sd_flag & SD_BALANCE_WAKE) {
unsigned long scale_rt_power(int cpu)
{
struct rq *rq = cpu_rq(cpu);
- u64 total, available;
+ u64 total, available, age_stamp, avg;
- total = sched_avg_period() + (rq->clock - rq->age_stamp);
+ /*
+ * Since we're reading these variables without serialization make sure
+ * we read them once before doing sanity checks on them.
+ */
+ age_stamp = ACCESS_ONCE(rq->age_stamp);
+ avg = ACCESS_ONCE(rq->rt_avg);
+
+ total = sched_avg_period() + (rq->clock - age_stamp);
- if (unlikely(total < rq->rt_avg)) {
+ if (unlikely(total < avg)) {
/* Ensures that power won't end up being negative */
available = 0;
} else {
- available = total - rq->rt_avg;
+ available = total - avg;
}
if (unlikely((s64)total < SCHED_POWER_SCALE))
power = 0;
- group = child->groups;
- do {
- power += group->sgp->power;
- group = group->next;
- } while (group != child->groups);
+ if (child->flags & SD_OVERLAP) {
+ /*
+ * SD_OVERLAP domains cannot assume that child groups
+ * span the current group.
+ */
- sdg->sgp->power = power;
+ for_each_cpu(cpu, sched_group_cpus(sdg))
+ power += power_of(cpu);
+ } else {
+ /*
+ * !SD_OVERLAP domains can assume that child groups
+ * span the current group.
+ */
+
+ group = child->groups;
+ do {
+ power += group->sgp->power;
+ group = group->next;
+ } while (group != child->groups);
+ }
+
+ sdg->sgp->power_orig = sdg->sgp->power = power;
}
/*
/**
* update_sg_lb_stats - Update sched_group's statistics for load balancing.
- * @sd: The sched_domain whose statistics are to be updated.
+ * @env: The load balancing environment.
* @group: sched_group whose statistics are to be updated.
* @load_idx: Load index of sched_domain of this_cpu for load calc.
* @local_group: Does group contain this_cpu.
int i;
if (local_group)
- balance_cpu = group_first_cpu(group);
+ balance_cpu = group_balance_cpu(group);
/* Tally up the load of all CPUs in the group */
max_cpu_load = 0;
/* Bias balancing toward cpus of our domain */
if (local_group) {
- if (idle_cpu(i) && !first_idle_cpu) {
+ if (idle_cpu(i) && !first_idle_cpu &&
+ cpumask_test_cpu(i, sched_group_mask(group))) {
first_idle_cpu = 1;
balance_cpu = i;
}
/**
* update_sd_pick_busiest - return 1 on busiest group
- * @sd: sched_domain whose statistics are to be checked
+ * @env: The load balancing environment.
* @sds: sched_domain statistics
* @sg: sched_group candidate to be checked for being the busiest
* @sgs: sched_group statistics
- * @this_cpu: the current cpu
*
* Determine if @sg is a busier group than the previously selected
* busiest group.
/**
* update_sd_lb_stats - Update sched_domain's statistics for load balancing.
- * @sd: sched_domain whose statistics are to be updated.
- * @this_cpu: Cpu for which load balance is currently performed.
- * @idle: Idle status of this_cpu
+ * @env: The load balancing environment.
* @cpus: Set of cpus considered for load balancing.
* @balance: Should we balance.
* @sds: variable to hold the statistics for this sched_domain.
* Returns 1 when packing is required and a task should be moved to
* this CPU. The amount of the imbalance is returned in *imbalance.
*
- * @sd: The sched_domain whose packing is to be checked.
+ * @env: The load balancing environment.
* @sds: Statistics of the sched_domain which is to be packed
- * @this_cpu: The cpu at whose sched_domain we're performing load-balance.
- * @imbalance: returns amount of imbalanced due to packing.
*/
static int check_asym_packing(struct lb_env *env, struct sd_lb_stats *sds)
{
* fix_small_imbalance - Calculate the minor imbalance that exists
* amongst the groups of a sched_domain, during
* load balancing.
+ * @env: The load balancing environment.
* @sds: Statistics of the sched_domain whose imbalance is to be calculated.
- * @this_cpu: The cpu at whose sched_domain we're performing load-balance.
- * @imbalance: Variable to store the imbalance.
*/
static inline
void fix_small_imbalance(struct lb_env *env, struct sd_lb_stats *sds)
* Also calculates the amount of weighted load which should be moved
* to restore balance.
*
- * @sd: The sched_domain whose busiest group is to be returned.
- * @this_cpu: The cpu for which load balancing is currently being performed.
- * @imbalance: Variable which stores amount of weighted load which should
- * be moved to restore balance/put a group to idle.
- * @idle: The idle status of this_cpu.
+ * @env: The load balancing environment.
* @cpus: The set of CPUs under consideration for load-balancing.
* @balance: Pointer to a variable indicating if this_cpu
* is the appropriate cpu to perform load balancing at this_level.
static struct task_struct *pick_next_task_idle(struct rq *rq)
{
schedstat_inc(rq, sched_goidle);
- calc_load_account_idle(rq);
return rq->idle;
}
static void inc_rt_migration(struct sched_rt_entity *rt_se, struct rt_rq *rt_rq)
{
+ struct task_struct *p;
+
if (!rt_entity_is_task(rt_se))
return;
+ p = rt_task_of(rt_se);
rt_rq = &rq_of_rt_rq(rt_rq)->rt;
rt_rq->rt_nr_total++;
- if (rt_se->nr_cpus_allowed > 1)
+ if (p->nr_cpus_allowed > 1)
rt_rq->rt_nr_migratory++;
update_rt_migration(rt_rq);
static void dec_rt_migration(struct sched_rt_entity *rt_se, struct rt_rq *rt_rq)
{
+ struct task_struct *p;
+
if (!rt_entity_is_task(rt_se))
return;
+ p = rt_task_of(rt_se);
rt_rq = &rq_of_rt_rq(rt_rq)->rt;
rt_rq->rt_nr_total--;
- if (rt_se->nr_cpus_allowed > 1)
+ if (p->nr_cpus_allowed > 1)
rt_rq->rt_nr_migratory--;
update_rt_migration(rt_rq);
enqueue_rt_entity(rt_se, flags & ENQUEUE_HEAD);
- if (!task_current(rq, p) && p->rt.nr_cpus_allowed > 1)
+ if (!task_current(rq, p) && p->nr_cpus_allowed > 1)
enqueue_pushable_task(rq, p);
inc_nr_running(rq);
cpu = task_cpu(p);
- if (p->rt.nr_cpus_allowed == 1)
+ if (p->nr_cpus_allowed == 1)
goto out;
/* For anything but wake ups, just return the task_cpu */
* will have to sort it out.
*/
if (curr && unlikely(rt_task(curr)) &&
- (curr->rt.nr_cpus_allowed < 2 ||
+ (curr->nr_cpus_allowed < 2 ||
curr->prio <= p->prio) &&
- (p->rt.nr_cpus_allowed > 1)) {
+ (p->nr_cpus_allowed > 1)) {
int target = find_lowest_rq(p);
if (target != -1)
static void check_preempt_equal_prio(struct rq *rq, struct task_struct *p)
{
- if (rq->curr->rt.nr_cpus_allowed == 1)
+ if (rq->curr->nr_cpus_allowed == 1)
return;
- if (p->rt.nr_cpus_allowed != 1
+ if (p->nr_cpus_allowed != 1
&& cpupri_find(&rq->rd->cpupri, p, NULL))
return;
* The previous task needs to be made eligible for pushing
* if it is still active
*/
- if (on_rt_rq(&p->rt) && p->rt.nr_cpus_allowed > 1)
+ if (on_rt_rq(&p->rt) && p->nr_cpus_allowed > 1)
enqueue_pushable_task(rq, p);
}
{
if (!task_running(rq, p) &&
(cpu < 0 || cpumask_test_cpu(cpu, tsk_cpus_allowed(p))) &&
- (p->rt.nr_cpus_allowed > 1))
+ (p->nr_cpus_allowed > 1))
return 1;
return 0;
}
if (unlikely(!lowest_mask))
return -1;
- if (task->rt.nr_cpus_allowed == 1)
+ if (task->nr_cpus_allowed == 1)
return -1; /* No other targets possible */
if (!cpupri_find(&task_rq(task)->rd->cpupri, task, lowest_mask))
task_running(rq, task) ||
!task->on_rq)) {
- raw_spin_unlock(&lowest_rq->lock);
+ double_unlock_balance(rq, lowest_rq);
lowest_rq = NULL;
break;
}
BUG_ON(rq->cpu != task_cpu(p));
BUG_ON(task_current(rq, p));
- BUG_ON(p->rt.nr_cpus_allowed <= 1);
+ BUG_ON(p->nr_cpus_allowed <= 1);
BUG_ON(!p->on_rq);
BUG_ON(!rt_task(p));
if (!task_running(rq, p) &&
!test_tsk_need_resched(rq->curr) &&
has_pushable_tasks(rq) &&
- p->rt.nr_cpus_allowed > 1 &&
+ p->nr_cpus_allowed > 1 &&
rt_task(rq->curr) &&
- (rq->curr->rt.nr_cpus_allowed < 2 ||
+ (rq->curr->nr_cpus_allowed < 2 ||
rq->curr->prio <= p->prio))
push_rt_tasks(rq);
}
* Only update if the process changes its state from whether it
* can migrate or not.
*/
- if ((p->rt.nr_cpus_allowed > 1) == (weight > 1))
+ if ((p->nr_cpus_allowed > 1) == (weight > 1))
return;
rq = task_rq(p);
static void task_tick_rt(struct rq *rq, struct task_struct *p, int queued)
{
+ struct sched_rt_entity *rt_se = &p->rt;
+
update_curr_rt(rq);
watchdog(rq, p);
p->rt.time_slice = RR_TIMESLICE;
/*
- * Requeue to the end of queue if we are not the only element
- * on the queue:
+ * Requeue to the end of queue if we (and all of our ancestors) are the
+ * only element on the queue
*/
- if (p->rt.run_list.prev != p->rt.run_list.next) {
- requeue_task_rt(rq, p, 0);
- set_tsk_need_resched(p);
+ for_each_sched_rt_entity(rt_se) {
+ if (rt_se->run_list.prev != rt_se->run_list.next) {
+ requeue_task_rt(rq, p, 0);
+ set_tsk_need_resched(p);
+ return;
+ }
}
}
DECLARE_PER_CPU(struct sched_domain *, sd_llc);
DECLARE_PER_CPU(int, sd_llc_id);
+extern int group_balance_cpu(struct sched_group *sg);
+
#endif /* CONFIG_SMP */
#include "stats.h"
return (u64)sysctl_sched_time_avg * NSEC_PER_MSEC / 2;
}
-void calc_load_account_idle(struct rq *this_rq);
-
#ifdef CONFIG_SCHED_HRTICK
/*
per_cpu(idle_threads, smp_processor_id()) = current;
}
+/**
+ * idle_init - Initialize the idle thread for a cpu
+ * @cpu: The cpu for which the idle thread should be initialized
+ *
+ * Creates the thread if it does not exist.
+ */
static inline void idle_init(unsigned int cpu)
{
struct task_struct *tsk = per_cpu(idle_threads, cpu);
}
/**
- * idle_thread_init - Initialize the idle thread for a cpu
- * @cpu: The cpu for which the idle thread should be initialized
- *
- * Creates the thread if it does not exist.
+ * idle_threads_init - Initialize idle threads for all cpus
*/
void __init idle_threads_init(void)
{
- unsigned int cpu;
+ unsigned int cpu, boot_cpu;
+
+ boot_cpu = smp_processor_id();
for_each_possible_cpu(cpu) {
- if (cpu != smp_processor_id())
+ if (cpu != boot_cpu)
idle_init(cpu);
}
}
}
#ifdef CONFIG_CHECKPOINT_RESTORE
-static bool vma_flags_mismatch(struct vm_area_struct *vma,
- unsigned long required,
- unsigned long banned)
-{
- return (vma->vm_flags & required) != required ||
- (vma->vm_flags & banned);
-}
-
static int prctl_set_mm_exe_file(struct mm_struct *mm, unsigned int fd)
{
struct file *exe_file;
struct dentry *dentry;
int err;
- /*
- * Setting new mm::exe_file is only allowed when no VM_EXECUTABLE vma's
- * remain. So perform a quick test first.
- */
- if (mm->num_exe_file_vmas)
- return -EBUSY;
-
exe_file = fget(fd);
if (!exe_file)
return -EBADF;
if (err)
goto exit;
+ down_write(&mm->mmap_sem);
+
+ /*
+ * Forbid mm->exe_file change if old file still mapped.
+ */
+ err = -EBUSY;
+ if (mm->exe_file) {
+ struct vm_area_struct *vma;
+
+ for (vma = mm->mmap; vma; vma = vma->vm_next)
+ if (vma->vm_file &&
+ path_equal(&vma->vm_file->f_path,
+ &mm->exe_file->f_path))
+ goto exit_unlock;
+ }
+
/*
* The symlink can be changed only once, just to disallow arbitrary
* transitions malicious software might bring in. This means one
* could make a snapshot over all processes running and monitor
* /proc/pid/exe changes to notice unusual activity if needed.
*/
- down_write(&mm->mmap_sem);
- if (likely(!mm->exe_file))
- set_mm_exe_file(mm, exe_file);
- else
- err = -EBUSY;
+ err = -EPERM;
+ if (test_and_set_bit(MMF_EXE_FILE_CHANGED, &mm->flags))
+ goto exit_unlock;
+
+ err = 0;
+ set_mm_exe_file(mm, exe_file);
+exit_unlock:
up_write(&mm->mmap_sem);
exit:
if (opt == PR_SET_MM_EXE_FILE)
return prctl_set_mm_exe_file(mm, (unsigned int)addr);
- if (addr >= TASK_SIZE)
+ if (addr >= TASK_SIZE || addr < mmap_min_addr)
return -EINVAL;
error = -EINVAL;
error = -EFAULT;
goto out;
}
-#ifdef CONFIG_STACK_GROWSUP
- if (vma_flags_mismatch(vma, VM_READ | VM_WRITE | VM_GROWSUP, 0))
-#else
- if (vma_flags_mismatch(vma, VM_READ | VM_WRITE | VM_GROWSDOWN, 0))
-#endif
- goto out;
if (opt == PR_SET_MM_START_STACK)
mm->start_stack = addr;
else if (opt == PR_SET_MM_ARG_START)
up_read(&mm->mmap_sem);
return error;
}
+
+static int prctl_get_tid_address(struct task_struct *me, int __user **tid_addr)
+{
+ return put_user(me->clear_child_tid, tid_addr);
+}
+
#else /* CONFIG_CHECKPOINT_RESTORE */
static int prctl_set_mm(int opt, unsigned long addr,
unsigned long arg4, unsigned long arg5)
{
return -EINVAL;
}
+static int prctl_get_tid_address(struct task_struct *me, int __user **tid_addr)
+{
+ return -EINVAL;
+}
#endif
SYSCALL_DEFINE5(prctl, int, option, unsigned long, arg2, unsigned long, arg3,
case PR_SET_MM:
error = prctl_set_mm(arg2, arg3, arg4, arg5);
break;
+ case PR_GET_TID_ADDRESS:
+ error = prctl_get_tid_address(me, (int __user **)arg2);
+ break;
case PR_SET_CHILD_SUBREAPER:
me->signal->is_child_subreaper = !!arg2;
error = 0;
}
EXPORT_SYMBOL_GPL(clockevents_register_device);
-static void clockevents_config(struct clock_event_device *dev,
- u32 freq)
+void clockevents_config(struct clock_event_device *dev, u32 freq)
{
u64 sec;
time_state = TIME_DEL;
break;
case TIME_INS:
- if (secs % 86400 == 0) {
+ if (!(time_status & STA_INS))
+ time_state = TIME_OK;
+ else if (secs % 86400 == 0) {
leap = -1;
time_state = TIME_OOP;
time_tai++;
}
break;
case TIME_DEL:
- if ((secs + 1) % 86400 == 0) {
+ if (!(time_status & STA_DEL))
+ time_state = TIME_OK;
+ else if ((secs + 1) % 86400 == 0) {
leap = 1;
time_tai--;
time_state = TIME_WAIT;
static void tick_nohz_stop_sched_tick(struct tick_sched *ts)
{
unsigned long seq, last_jiffies, next_jiffies, delta_jiffies;
+ unsigned long rcu_delta_jiffies;
ktime_t last_update, expires, now;
struct clock_event_device *dev = __get_cpu_var(tick_cpu_device).evtdev;
u64 time_delta;
time_delta = timekeeping_max_deferment();
} while (read_seqretry(&xtime_lock, seq));
- if (rcu_needs_cpu(cpu) || printk_needs_cpu(cpu) ||
+ if (rcu_needs_cpu(cpu, &rcu_delta_jiffies) || printk_needs_cpu(cpu) ||
arch_needs_cpu(cpu)) {
next_jiffies = last_jiffies + 1;
delta_jiffies = 1;
/* Get the next timer wheel timer */
next_jiffies = get_next_timer_interrupt(last_jiffies);
delta_jiffies = next_jiffies - last_jiffies;
+ if (rcu_delta_jiffies < delta_jiffies) {
+ next_jiffies = last_jiffies + rcu_delta_jiffies;
+ delta_jiffies = rcu_delta_jiffies;
+ }
}
/*
* Do not stop the tick, if we are only one off
*/
if (!ts->tick_stopped) {
select_nohz_load_balancer(1);
+ calc_load_enter_idle();
ts->idle_tick = hrtimer_get_expires(&ts->sched_timer);
ts->tick_stopped = 1;
/* Update jiffies first */
select_nohz_load_balancer(0);
tick_do_update_jiffies64(now);
+ update_cpu_load_nohz();
#ifndef CONFIG_VIRT_CPU_ACCOUNTING
/*
account_idle_ticks(ticks);
#endif
+ calc_load_exit_idle();
touch_softlockup_watchdog();
/*
* Cancel the scheduled timer and restore the tick
return HRTIMER_RESTART;
}
+static int sched_skew_tick;
+
+static int __init skew_tick(char *str)
+{
+ get_option(&str, &sched_skew_tick);
+
+ return 0;
+}
+early_param("skew_tick", skew_tick);
+
/**
* tick_setup_sched_timer - setup the tick emulation timer
*/
/* Get the next period (per cpu) */
hrtimer_set_expires(&ts->sched_timer, tick_init_jiffy_update());
+ /* Offset the tick to avert xtime_lock contention. */
+ if (sched_skew_tick) {
+ u64 offset = ktime_to_ns(tick_period) >> 1;
+ do_div(offset, num_possible_cpus());
+ offset *= smp_processor_id();
+ hrtimer_add_expires_ns(&ts->sched_timer, offset);
+ }
+
for (;;) {
hrtimer_forward(&ts->sched_timer, now, tick_period);
hrtimer_start_expires(&ts->sched_timer,
/* The raw monotonic time for the CLOCK_MONOTONIC_RAW posix clock. */
struct timespec raw_time;
+ /* Offset clock monotonic -> clock realtime */
+ ktime_t offs_real;
+
+ /* Offset clock monotonic -> clock boottime */
+ ktime_t offs_boot;
+
/* Seqlock for all timekeeper values */
seqlock_t lock;
};
return clocksource_cyc2ns(cycle_delta, clock->mult, clock->shift);
}
+static void update_rt_offset(void)
+{
+ struct timespec tmp, *wtm = &timekeeper.wall_to_monotonic;
+
+ set_normalized_timespec(&tmp, -wtm->tv_sec, -wtm->tv_nsec);
+ timekeeper.offs_real = timespec_to_ktime(tmp);
+}
+
/* must hold write on timekeeper.lock */
static void timekeeping_update(bool clearntp)
{
timekeeper.ntp_error = 0;
ntp_clear();
}
+ update_rt_offset();
update_vsyscall(&timekeeper.xtime, &timekeeper.wall_to_monotonic,
timekeeper.clock, timekeeper.mult);
}
}
set_normalized_timespec(&timekeeper.wall_to_monotonic,
-boot.tv_sec, -boot.tv_nsec);
+ update_rt_offset();
timekeeper.total_sleep_time.tv_sec = 0;
timekeeper.total_sleep_time.tv_nsec = 0;
write_sequnlock_irqrestore(&timekeeper.lock, flags);
/* time in seconds when suspend began */
static struct timespec timekeeping_suspend_time;
+static void update_sleep_time(struct timespec t)
+{
+ timekeeper.total_sleep_time = t;
+ timekeeper.offs_boot = timespec_to_ktime(t);
+}
+
/**
* __timekeeping_inject_sleeptime - Internal function to add sleep interval
* @delta: pointer to a timespec delta value
timekeeper.xtime = timespec_add(timekeeper.xtime, *delta);
timekeeper.wall_to_monotonic =
timespec_sub(timekeeper.wall_to_monotonic, *delta);
- timekeeper.total_sleep_time = timespec_add(
- timekeeper.total_sleep_time, *delta);
+ update_sleep_time(timespec_add(timekeeper.total_sleep_time, *delta));
}
timekeeper.clock->cycle_last = timekeeper.clock->read(timekeeper.clock);
timekeeper.ntp_error = 0;
timekeeping_suspended = 0;
+ timekeeping_update(false);
write_sequnlock_irqrestore(&timekeeper.lock, flags);
touch_softlockup_watchdog();
timekeeper.xtime.tv_sec++;
leap = second_overflow(timekeeper.xtime.tv_sec);
timekeeper.xtime.tv_sec += leap;
+ timekeeper.wall_to_monotonic.tv_sec -= leap;
+ if (leap)
+ clock_was_set_delayed();
}
/* Accumulate raw time */
timekeeper.xtime.tv_sec++;
leap = second_overflow(timekeeper.xtime.tv_sec);
timekeeper.xtime.tv_sec += leap;
+ timekeeper.wall_to_monotonic.tv_sec -= leap;
+ if (leap)
+ clock_was_set_delayed();
}
timekeeping_update(false);
} while (read_seqretry(&timekeeper.lock, seq));
}
+#ifdef CONFIG_HIGH_RES_TIMERS
+/**
+ * ktime_get_update_offsets - hrtimer helper
+ * @offs_real: pointer to storage for monotonic -> realtime offset
+ * @offs_boot: pointer to storage for monotonic -> boottime offset
+ *
+ * Returns current monotonic time and updates the offsets
+ * Called from hrtimer_interupt() or retrigger_next_event()
+ */
+ktime_t ktime_get_update_offsets(ktime_t *offs_real, ktime_t *offs_boot)
+{
+ ktime_t now;
+ unsigned int seq;
+ u64 secs, nsecs;
+
+ do {
+ seq = read_seqbegin(&timekeeper.lock);
+
+ secs = timekeeper.xtime.tv_sec;
+ nsecs = timekeeper.xtime.tv_nsec;
+ nsecs += timekeeping_get_ns();
+ /* If arch requires, add in gettimeoffset() */
+ nsecs += arch_gettimeoffset();
+
+ *offs_real = timekeeper.offs_real;
+ *offs_boot = timekeeper.offs_boot;
+ } while (read_seqretry(&timekeeper.lock, seq));
+
+ now = ktime_add_ns(ktime_set(secs, 0), nsecs);
+ now = ktime_sub(now, *offs_real);
+ return now;
+}
+#endif
+
/**
* ktime_get_monotonic_offset() - get wall_to_monotonic in ktime_t format
*/
rb_init_page(bpage->page);
INIT_LIST_HEAD(&cpu_buffer->reader_page->list);
+ INIT_LIST_HEAD(&cpu_buffer->new_pages);
ret = rb_allocate_pages(cpu_buffer, nr_pages);
if (ret < 0)
* If something was added to this page, it was full
* since it is not the tail page. So we deduct the
* bytes consumed in ring buffer from here.
- * No need to update overruns, since this page is
- * deleted from ring buffer and its entries are
- * already accounted for.
+ * Increment overrun to account for the lost events.
*/
+ local_add(page_entries, &cpu_buffer->overrun);
local_sub(BUF_PAGE_SIZE, &cpu_buffer->entries_bytes);
}
void tracing_off(void)
{
if (global_trace.buffer)
- ring_buffer_record_on(global_trace.buffer);
+ ring_buffer_record_off(global_trace.buffer);
/*
* This flag is only looked at when buffers haven't been
* allocated yet. We don't really care about the race
.pages = pages_def,
.partial = partial_def,
.nr_pages = 0, /* This gets updated below. */
+ .nr_pages_max = PIPE_DEF_BUFFERS,
.flags = flags,
.ops = &tracing_pipe_buf_ops,
.spd_release = tracing_spd_release_pipe,
ret = splice_to_pipe(pipe, &spd);
out:
- splice_shrink_spd(pipe, &spd);
+ splice_shrink_spd(&spd);
return ret;
out_err:
struct splice_pipe_desc spd = {
.pages = pages_def,
.partial = partial_def,
+ .nr_pages_max = PIPE_DEF_BUFFERS,
.flags = flags,
.ops = &buffer_pipe_buf_ops,
.spd_release = buffer_spd_release,
}
ret = splice_to_pipe(pipe, &spd);
- splice_shrink_spd(pipe, &spd);
+ splice_shrink_spd(&spd);
out:
return ret;
}
#ifdef CONFIG_HARDLOCKUP_DETECTOR
+/*
+ * People like the simple clean cpu node info on boot.
+ * Reduce the watchdog noise by only printing messages
+ * that are different from what cpu0 displayed.
+ */
+static unsigned long cpu0_err;
+
static int watchdog_nmi_enable(int cpu)
{
struct perf_event_attr *wd_attr;
/* Try to register using hardware perf events */
event = perf_event_create_kernel_counter(wd_attr, cpu, NULL, watchdog_overflow_callback, NULL);
+
+ /* save cpu0 error for future comparision */
+ if (cpu == 0 && IS_ERR(event))
+ cpu0_err = PTR_ERR(event);
+
if (!IS_ERR(event)) {
- pr_info("enabled, takes one hw-pmu counter.\n");
+ /* only print for cpu0 or different than cpu0 */
+ if (cpu == 0 || cpu0_err)
+ pr_info("enabled on all CPUs, permanently consumes one hw-PMU counter.\n");
goto out_save;
}
+ /* skip displaying the same error again */
+ if (cpu > 0 && (PTR_ERR(event) == cpu0_err))
+ return PTR_ERR(event);
/* vary the KERN level based on the returned errno */
if (PTR_ERR(event) == -EOPNOTSUPP)
default 0 if !BOOTPARAM_SOFTLOCKUP_PANIC
default 1 if BOOTPARAM_SOFTLOCKUP_PANIC
+config PANIC_ON_OOPS
+ bool "Panic on Oops" if EXPERT
+ default n
+ help
+ Say Y here to enable the kernel to panic when it oopses. This
+ has the same effect as setting oops=panic on the kernel command
+ line.
+
+ This feature is useful to ensure that the kernel does not do
+ anything erroneous after an oops which could result in data
+ corruption or other issues.
+
+ Say N if unsure.
+
+config PANIC_ON_OOPS_VALUE
+ int
+ range 0 1
+ default 0 if !PANIC_ON_OOPS
+ default 1 if PANIC_ON_OOPS
+
config DETECT_HUNG_TASK
bool "Detect Hung Tasks"
depends on DEBUG_KERNEL
if (head->height == 0)
return NULL;
-retry:
longcpy(key, __key, geo->keylen);
+retry:
dec_key(geo, key);
node = head->node;
}
miss:
if (retry_key) {
- __key = retry_key;
+ longcpy(key, retry_key, geo->keylen);
retry_key = NULL;
goto retry;
}
int btree_insert(struct btree_head *head, struct btree_geo *geo,
unsigned long *key, void *val, gfp_t gfp)
{
+ BUG_ON(!val);
return btree_insert_level(head, geo, key, val, 1, gfp);
}
EXPORT_SYMBOL_GPL(btree_insert);
static DEFINE_SPINLOCK(free_entries_lock);
/* Global disable flag - will be set in case of an error */
-static bool global_disable __read_mostly;
+static u32 global_disable __read_mostly;
/* Global error count */
static u32 error_count;
global_disable_dent = debugfs_create_bool("disabled", 0444,
dma_debug_dent,
- (u32 *)&global_disable);
+ &global_disable);
if (!global_disable_dent)
goto out_err;
bool should_fail(struct fault_attr *attr, ssize_t size)
{
+ /* No need to check any other properties if the probability is 0 */
+ if (attr->probability == 0)
+ return false;
+
if (attr->task_filter && !fail_task(attr, current))
return false;
* during iterating; it can be zero only at the beginning.
* And we cannot overflow iter->next_index in a single step,
* because RADIX_TREE_MAP_SHIFT < BITS_PER_LONG.
+ *
+ * This condition also used by radix_tree_next_slot() to stop
+ * contiguous iterating, and forbid swithing to the next chunk.
*/
index = iter->next_index;
if (!index && iter->index)
#include <linux/raid/pq.h>
/* Recover two failed data blocks. */
-void raid6_2data_recov_intx1(int disks, size_t bytes, int faila, int failb,
- void **ptrs)
+static void raid6_2data_recov_intx1(int disks, size_t bytes, int faila,
+ int failb, void **ptrs)
{
u8 *p, *q, *dp, *dq;
u8 px, qx, db;
}
/* Recover failure of one data block plus the P block */
-void raid6_datap_recov_intx1(int disks, size_t bytes, int faila, void **ptrs)
+static void raid6_datap_recov_intx1(int disks, size_t bytes, int faila,
+ void **ptrs)
{
u8 *p, *q, *dq;
const u8 *qmul; /* Q multiplier table */
boot_cpu_has(X86_FEATURE_SSSE3);
}
-void raid6_2data_recov_ssse3(int disks, size_t bytes, int faila, int failb,
- void **ptrs)
+static void raid6_2data_recov_ssse3(int disks, size_t bytes, int faila,
+ int failb, void **ptrs)
{
u8 *p, *q, *dp, *dq;
const u8 *pbmul; /* P multiplier table for B data */
}
-void raid6_datap_recov_ssse3(int disks, size_t bytes, int faila, void **ptrs)
+static void raid6_datap_recov_ssse3(int disks, size_t bytes, int faila,
+ void **ptrs)
{
u8 *p, *q, *dq;
const u8 *qmul; /* Q multiplier table */
/* lockup suspected: */
if (print_once) {
print_once = 0;
- spin_dump(lock, "lockup");
+ spin_dump(lock, "lockup suspected");
#ifdef CONFIG_SMP
trigger_all_cpu_backtrace();
#endif
in a negligible performance hit.
If unsure, say Y to enable cleancache
+
+config FRONTSWAP
+ bool "Enable frontswap to cache swap pages if tmem is present"
+ depends on SWAP
+ default n
+ help
+ Frontswap is so named because it can be thought of as the opposite
+ of a "backing" store for a swap device. The data is stored into
+ "transcendent memory", memory that is not directly accessible or
+ addressable by the kernel and is of unknown and possibly
+ time-varying size. When space in transcendent memory is available,
+ a significant swap I/O reduction may be achieved. When none is
+ available, all frontswap calls are reduced to a single pointer-
+ compare-against-NULL resulting in a negligible performance hit
+ and swap data is stored as normal on the matching swap device.
+
+ If unsure, say Y to enable frontswap.
obj-$(CONFIG_BOUNCE) += bounce.o
obj-$(CONFIG_SWAP) += page_io.o swap_state.o swapfile.o
+obj-$(CONFIG_FRONTSWAP) += frontswap.o
obj-$(CONFIG_HAS_DMA) += dmapool.o
obj-$(CONFIG_HUGETLBFS) += hugetlb.o
obj-$(CONFIG_NUMA) += mempolicy.o
return ___alloc_bootmem(size, align, goal, limit);
}
-static void * __init ___alloc_bootmem_node_nopanic(pg_data_t *pgdat,
+void * __init ___alloc_bootmem_node_nopanic(pg_data_t *pgdat,
unsigned long size, unsigned long align,
unsigned long goal, unsigned long limit)
{
if (ptr)
return ptr;
+ /* do not panic in alloc_bootmem_bdata() */
+ if (limit && goal + size > limit)
+ limit = 0;
+
ptr = alloc_bootmem_bdata(pgdat->bdata, size, align, goal, limit);
if (ptr)
return ptr;
*/
while (unlikely(too_many_isolated(zone))) {
/* async migration should just abort */
- if (cc->mode != COMPACT_SYNC)
+ if (!cc->sync)
return 0;
congestion_wait(BLK_RW_ASYNC, HZ/10);
* satisfies the allocation
*/
pageblock_nr = low_pfn >> pageblock_order;
- if (cc->mode != COMPACT_SYNC &&
- last_pageblock_nr != pageblock_nr &&
+ if (!cc->sync && last_pageblock_nr != pageblock_nr &&
!migrate_async_suitable(get_pageblock_migratetype(page))) {
low_pfn += pageblock_nr_pages;
low_pfn = ALIGN(low_pfn, pageblock_nr_pages) - 1;
continue;
}
- if (cc->mode != COMPACT_SYNC)
+ if (!cc->sync)
mode |= ISOLATE_ASYNC_MIGRATE;
lruvec = mem_cgroup_page_lruvec(page, zone);
#endif /* CONFIG_COMPACTION || CONFIG_CMA */
#ifdef CONFIG_COMPACTION
-/*
- * Returns true if MIGRATE_UNMOVABLE pageblock was successfully
- * converted to MIGRATE_MOVABLE type, false otherwise.
- */
-static bool rescue_unmovable_pageblock(struct page *page)
-{
- unsigned long pfn, start_pfn, end_pfn;
- struct page *start_page, *end_page;
-
- pfn = page_to_pfn(page);
- start_pfn = pfn & ~(pageblock_nr_pages - 1);
- end_pfn = start_pfn + pageblock_nr_pages;
-
- start_page = pfn_to_page(start_pfn);
- end_page = pfn_to_page(end_pfn);
-
- /* Do not deal with pageblocks that overlap zones */
- if (page_zone(start_page) != page_zone(end_page))
- return false;
-
- for (page = start_page, pfn = start_pfn; page < end_page; pfn++,
- page++) {
- if (!pfn_valid_within(pfn))
- continue;
-
- if (PageBuddy(page)) {
- int order = page_order(page);
-
- pfn += (1 << order) - 1;
- page += (1 << order) - 1;
-
- continue;
- } else if (page_count(page) == 0 || PageLRU(page))
- continue;
-
- return false;
- }
-
- set_pageblock_migratetype(page, MIGRATE_MOVABLE);
- move_freepages_block(page_zone(page), page, MIGRATE_MOVABLE);
- return true;
-}
-
-enum smt_result {
- GOOD_AS_MIGRATION_TARGET,
- FAIL_UNMOVABLE_TARGET,
- FAIL_BAD_TARGET,
-};
-/*
- * Returns GOOD_AS_MIGRATION_TARGET if the page is within a block
- * suitable for migration to, FAIL_UNMOVABLE_TARGET if the page
- * is within a MIGRATE_UNMOVABLE block, FAIL_BAD_TARGET otherwise.
- */
-static enum smt_result suitable_migration_target(struct page *page,
- struct compact_control *cc)
+/* Returns true if the page is within a block suitable for migration to */
+static bool suitable_migration_target(struct page *page)
{
int migratetype = get_pageblock_migratetype(page);
/* Don't interfere with memory hot-remove or the min_free_kbytes blocks */
if (migratetype == MIGRATE_ISOLATE || migratetype == MIGRATE_RESERVE)
- return FAIL_BAD_TARGET;
+ return false;
/* If the page is a large free page, then allow migration */
if (PageBuddy(page) && page_order(page) >= pageblock_order)
- return GOOD_AS_MIGRATION_TARGET;
+ return true;
/* If the block is MIGRATE_MOVABLE or MIGRATE_CMA, allow migration */
- if (cc->mode != COMPACT_ASYNC_UNMOVABLE &&
- migrate_async_suitable(migratetype))
- return GOOD_AS_MIGRATION_TARGET;
-
- if (cc->mode == COMPACT_ASYNC_MOVABLE &&
- migratetype == MIGRATE_UNMOVABLE)
- return FAIL_UNMOVABLE_TARGET;
-
- if (cc->mode != COMPACT_ASYNC_MOVABLE &&
- migratetype == MIGRATE_UNMOVABLE &&
- rescue_unmovable_pageblock(page))
- return GOOD_AS_MIGRATION_TARGET;
+ if (migrate_async_suitable(migratetype))
+ return true;
/* Otherwise skip the block */
- return FAIL_BAD_TARGET;
+ return false;
}
/*
zone_end_pfn = zone->zone_start_pfn + zone->spanned_pages;
- /*
- * isolate_freepages() may be called more than once during
- * compact_zone_order() run and we want only the most recent
- * count.
- */
- cc->nr_pageblocks_skipped = 0;
-
/*
* Isolate free pages until enough are available to migrate the
* pages on cc->migratepages. We stop searching if the migrate
for (; pfn > low_pfn && cc->nr_migratepages > nr_freepages;
pfn -= pageblock_nr_pages) {
unsigned long isolated;
- enum smt_result ret;
if (!pfn_valid(pfn))
continue;
continue;
/* Check the block is suitable for migration */
- ret = suitable_migration_target(page, cc);
- if (ret != GOOD_AS_MIGRATION_TARGET) {
- if (ret == FAIL_UNMOVABLE_TARGET)
- cc->nr_pageblocks_skipped++;
+ if (!suitable_migration_target(page))
continue;
- }
+
/*
* Found a block suitable for isolating free pages from. Now
* we disabled interrupts, double check things are ok and
*/
isolated = 0;
spin_lock_irqsave(&zone->lock, flags);
- ret = suitable_migration_target(page, cc);
- if (ret == GOOD_AS_MIGRATION_TARGET) {
+ if (suitable_migration_target(page)) {
end_pfn = min(pfn + pageblock_nr_pages, zone_end_pfn);
isolated = isolate_freepages_block(pfn, end_pfn,
freelist, false);
nr_freepages += isolated;
- } else if (ret == FAIL_UNMOVABLE_TARGET)
- cc->nr_pageblocks_skipped++;
+ }
spin_unlock_irqrestore(&zone->lock, flags);
/*
nr_migrate = cc->nr_migratepages;
err = migrate_pages(&cc->migratepages, compaction_alloc,
- (unsigned long)&cc->freepages, false,
- (cc->mode == COMPACT_SYNC) ? MIGRATE_SYNC_LIGHT
- : MIGRATE_ASYNC);
+ (unsigned long)cc, false,
+ cc->sync ? MIGRATE_SYNC_LIGHT : MIGRATE_ASYNC);
update_nr_listpages(cc);
nr_remaining = cc->nr_migratepages;
if (err) {
putback_lru_pages(&cc->migratepages);
cc->nr_migratepages = 0;
+ if (err == -ENOMEM) {
+ ret = COMPACT_PARTIAL;
+ goto out;
+ }
}
-
}
out:
static unsigned long compact_zone_order(struct zone *zone,
int order, gfp_t gfp_mask,
- enum compact_mode mode,
- unsigned long *nr_pageblocks_skipped)
+ bool sync)
{
struct compact_control cc = {
.nr_freepages = 0,
.order = order,
.migratetype = allocflags_to_migratetype(gfp_mask),
.zone = zone,
- .mode = mode,
+ .sync = sync,
};
- unsigned long rc;
-
INIT_LIST_HEAD(&cc.freepages);
INIT_LIST_HEAD(&cc.migratepages);
- rc = compact_zone(zone, &cc);
- *nr_pageblocks_skipped = cc.nr_pageblocks_skipped;
-
- return rc;
+ return compact_zone(zone, &cc);
}
int sysctl_extfrag_threshold = 500;
struct zoneref *z;
struct zone *zone;
int rc = COMPACT_SKIPPED;
- unsigned long nr_pageblocks_skipped;
- enum compact_mode mode;
/*
* Check whether it is worth even starting compaction. The order check is
nodemask) {
int status;
- mode = sync ? COMPACT_SYNC : COMPACT_ASYNC_MOVABLE;
-retry:
- status = compact_zone_order(zone, order, gfp_mask, mode,
- &nr_pageblocks_skipped);
+ status = compact_zone_order(zone, order, gfp_mask, sync);
rc = max(status, rc);
/* If a normal allocation would succeed, stop compacting */
if (zone_watermark_ok(zone, order, low_wmark_pages(zone), 0, 0))
break;
-
- if (rc == COMPACT_COMPLETE && mode == COMPACT_ASYNC_MOVABLE) {
- if (nr_pageblocks_skipped) {
- mode = COMPACT_ASYNC_UNMOVABLE;
- goto retry;
- }
- }
}
return rc;
if (ok && cc->order > zone->compact_order_failed)
zone->compact_order_failed = cc->order + 1;
/* Currently async compaction is never deferred. */
- else if (!ok && cc->mode == COMPACT_SYNC)
+ else if (!ok && cc->sync)
defer_compaction(zone, cc->order);
}
{
struct compact_control cc = {
.order = order,
- .mode = COMPACT_ASYNC_MOVABLE,
+ .sync = false,
};
return __compact_pgdat(pgdat, &cc);
{
struct compact_control cc = {
.order = -1,
- .mode = COMPACT_SYNC,
+ .sync = true,
};
return __compact_pgdat(NODE_DATA(nid), &cc);
--- /dev/null
+/*
+ * Frontswap frontend
+ *
+ * This code provides the generic "frontend" layer to call a matching
+ * "backend" driver implementation of frontswap. See
+ * Documentation/vm/frontswap.txt for more information.
+ *
+ * Copyright (C) 2009-2012 Oracle Corp. All rights reserved.
+ * Author: Dan Magenheimer
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2.
+ */
+
+#include <linux/mm.h>
+#include <linux/mman.h>
+#include <linux/swap.h>
+#include <linux/swapops.h>
+#include <linux/proc_fs.h>
+#include <linux/security.h>
+#include <linux/capability.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
+#include <linux/debugfs.h>
+#include <linux/frontswap.h>
+#include <linux/swapfile.h>
+
+/*
+ * frontswap_ops is set by frontswap_register_ops to contain the pointers
+ * to the frontswap "backend" implementation functions.
+ */
+static struct frontswap_ops frontswap_ops __read_mostly;
+
+/*
+ * This global enablement flag reduces overhead on systems where frontswap_ops
+ * has not been registered, so is preferred to the slower alternative: a
+ * function call that checks a non-global.
+ */
+bool frontswap_enabled __read_mostly;
+EXPORT_SYMBOL(frontswap_enabled);
+
+/*
+ * If enabled, frontswap_store will return failure even on success. As
+ * a result, the swap subsystem will always write the page to swap, in
+ * effect converting frontswap into a writethrough cache. In this mode,
+ * there is no direct reduction in swap writes, but a frontswap backend
+ * can unilaterally "reclaim" any pages in use with no data loss, thus
+ * providing increases control over maximum memory usage due to frontswap.
+ */
+static bool frontswap_writethrough_enabled __read_mostly;
+
+#ifdef CONFIG_DEBUG_FS
+/*
+ * Counters available via /sys/kernel/debug/frontswap (if debugfs is
+ * properly configured). These are for information only so are not protected
+ * against increment races.
+ */
+static u64 frontswap_loads;
+static u64 frontswap_succ_stores;
+static u64 frontswap_failed_stores;
+static u64 frontswap_invalidates;
+
+static inline void inc_frontswap_loads(void) {
+ frontswap_loads++;
+}
+static inline void inc_frontswap_succ_stores(void) {
+ frontswap_succ_stores++;
+}
+static inline void inc_frontswap_failed_stores(void) {
+ frontswap_failed_stores++;
+}
+static inline void inc_frontswap_invalidates(void) {
+ frontswap_invalidates++;
+}
+#else
+static inline void inc_frontswap_loads(void) { }
+static inline void inc_frontswap_succ_stores(void) { }
+static inline void inc_frontswap_failed_stores(void) { }
+static inline void inc_frontswap_invalidates(void) { }
+#endif
+/*
+ * Register operations for frontswap, returning previous thus allowing
+ * detection of multiple backends and possible nesting.
+ */
+struct frontswap_ops frontswap_register_ops(struct frontswap_ops *ops)
+{
+ struct frontswap_ops old = frontswap_ops;
+
+ frontswap_ops = *ops;
+ frontswap_enabled = true;
+ return old;
+}
+EXPORT_SYMBOL(frontswap_register_ops);
+
+/*
+ * Enable/disable frontswap writethrough (see above).
+ */
+void frontswap_writethrough(bool enable)
+{
+ frontswap_writethrough_enabled = enable;
+}
+EXPORT_SYMBOL(frontswap_writethrough);
+
+/*
+ * Called when a swap device is swapon'd.
+ */
+void __frontswap_init(unsigned type)
+{
+ struct swap_info_struct *sis = swap_info[type];
+
+ BUG_ON(sis == NULL);
+ if (sis->frontswap_map == NULL)
+ return;
+ if (frontswap_enabled)
+ (*frontswap_ops.init)(type);
+}
+EXPORT_SYMBOL(__frontswap_init);
+
+/*
+ * "Store" data from a page to frontswap and associate it with the page's
+ * swaptype and offset. Page must be locked and in the swap cache.
+ * If frontswap already contains a page with matching swaptype and
+ * offset, the frontswap implmentation may either overwrite the data and
+ * return success or invalidate the page from frontswap and return failure.
+ */
+int __frontswap_store(struct page *page)
+{
+ int ret = -1, dup = 0;
+ swp_entry_t entry = { .val = page_private(page), };
+ int type = swp_type(entry);
+ struct swap_info_struct *sis = swap_info[type];
+ pgoff_t offset = swp_offset(entry);
+
+ BUG_ON(!PageLocked(page));
+ BUG_ON(sis == NULL);
+ if (frontswap_test(sis, offset))
+ dup = 1;
+ ret = (*frontswap_ops.store)(type, offset, page);
+ if (ret == 0) {
+ frontswap_set(sis, offset);
+ inc_frontswap_succ_stores();
+ if (!dup)
+ atomic_inc(&sis->frontswap_pages);
+ } else if (dup) {
+ /*
+ failed dup always results in automatic invalidate of
+ the (older) page from frontswap
+ */
+ frontswap_clear(sis, offset);
+ atomic_dec(&sis->frontswap_pages);
+ inc_frontswap_failed_stores();
+ } else
+ inc_frontswap_failed_stores();
+ if (frontswap_writethrough_enabled)
+ /* report failure so swap also writes to swap device */
+ ret = -1;
+ return ret;
+}
+EXPORT_SYMBOL(__frontswap_store);
+
+/*
+ * "Get" data from frontswap associated with swaptype and offset that were
+ * specified when the data was put to frontswap and use it to fill the
+ * specified page with data. Page must be locked and in the swap cache.
+ */
+int __frontswap_load(struct page *page)
+{
+ int ret = -1;
+ swp_entry_t entry = { .val = page_private(page), };
+ int type = swp_type(entry);
+ struct swap_info_struct *sis = swap_info[type];
+ pgoff_t offset = swp_offset(entry);
+
+ BUG_ON(!PageLocked(page));
+ BUG_ON(sis == NULL);
+ if (frontswap_test(sis, offset))
+ ret = (*frontswap_ops.load)(type, offset, page);
+ if (ret == 0)
+ inc_frontswap_loads();
+ return ret;
+}
+EXPORT_SYMBOL(__frontswap_load);
+
+/*
+ * Invalidate any data from frontswap associated with the specified swaptype
+ * and offset so that a subsequent "get" will fail.
+ */
+void __frontswap_invalidate_page(unsigned type, pgoff_t offset)
+{
+ struct swap_info_struct *sis = swap_info[type];
+
+ BUG_ON(sis == NULL);
+ if (frontswap_test(sis, offset)) {
+ (*frontswap_ops.invalidate_page)(type, offset);
+ atomic_dec(&sis->frontswap_pages);
+ frontswap_clear(sis, offset);
+ inc_frontswap_invalidates();
+ }
+}
+EXPORT_SYMBOL(__frontswap_invalidate_page);
+
+/*
+ * Invalidate all data from frontswap associated with all offsets for the
+ * specified swaptype.
+ */
+void __frontswap_invalidate_area(unsigned type)
+{
+ struct swap_info_struct *sis = swap_info[type];
+
+ BUG_ON(sis == NULL);
+ if (sis->frontswap_map == NULL)
+ return;
+ (*frontswap_ops.invalidate_area)(type);
+ atomic_set(&sis->frontswap_pages, 0);
+ memset(sis->frontswap_map, 0, sis->max / sizeof(long));
+}
+EXPORT_SYMBOL(__frontswap_invalidate_area);
+
+/*
+ * Frontswap, like a true swap device, may unnecessarily retain pages
+ * under certain circumstances; "shrink" frontswap is essentially a
+ * "partial swapoff" and works by calling try_to_unuse to attempt to
+ * unuse enough frontswap pages to attempt to -- subject to memory
+ * constraints -- reduce the number of pages in frontswap to the
+ * number given in the parameter target_pages.
+ */
+void frontswap_shrink(unsigned long target_pages)
+{
+ struct swap_info_struct *si = NULL;
+ int si_frontswap_pages;
+ unsigned long total_pages = 0, total_pages_to_unuse;
+ unsigned long pages = 0, pages_to_unuse = 0;
+ int type;
+ bool locked = false;
+
+ /*
+ * we don't want to hold swap_lock while doing a very
+ * lengthy try_to_unuse, but swap_list may change
+ * so restart scan from swap_list.head each time
+ */
+ spin_lock(&swap_lock);
+ locked = true;
+ total_pages = 0;
+ for (type = swap_list.head; type >= 0; type = si->next) {
+ si = swap_info[type];
+ total_pages += atomic_read(&si->frontswap_pages);
+ }
+ if (total_pages <= target_pages)
+ goto out;
+ total_pages_to_unuse = total_pages - target_pages;
+ for (type = swap_list.head; type >= 0; type = si->next) {
+ si = swap_info[type];
+ si_frontswap_pages = atomic_read(&si->frontswap_pages);
+ if (total_pages_to_unuse < si_frontswap_pages)
+ pages = pages_to_unuse = total_pages_to_unuse;
+ else {
+ pages = si_frontswap_pages;
+ pages_to_unuse = 0; /* unuse all */
+ }
+ /* ensure there is enough RAM to fetch pages from frontswap */
+ if (security_vm_enough_memory_mm(current->mm, pages))
+ continue;
+ vm_unacct_memory(pages);
+ break;
+ }
+ if (type < 0)
+ goto out;
+ locked = false;
+ spin_unlock(&swap_lock);
+ try_to_unuse(type, true, pages_to_unuse);
+out:
+ if (locked)
+ spin_unlock(&swap_lock);
+ return;
+}
+EXPORT_SYMBOL(frontswap_shrink);
+
+/*
+ * Count and return the number of frontswap pages across all
+ * swap devices. This is exported so that backend drivers can
+ * determine current usage without reading debugfs.
+ */
+unsigned long frontswap_curr_pages(void)
+{
+ int type;
+ unsigned long totalpages = 0;
+ struct swap_info_struct *si = NULL;
+
+ spin_lock(&swap_lock);
+ for (type = swap_list.head; type >= 0; type = si->next) {
+ si = swap_info[type];
+ totalpages += atomic_read(&si->frontswap_pages);
+ }
+ spin_unlock(&swap_lock);
+ return totalpages;
+}
+EXPORT_SYMBOL(frontswap_curr_pages);
+
+static int __init init_frontswap(void)
+{
+#ifdef CONFIG_DEBUG_FS
+ struct dentry *root = debugfs_create_dir("frontswap", NULL);
+ if (root == NULL)
+ return -ENXIO;
+ debugfs_create_u64("loads", S_IRUGO, root, &frontswap_loads);
+ debugfs_create_u64("succ_stores", S_IRUGO, root, &frontswap_succ_stores);
+ debugfs_create_u64("failed_stores", S_IRUGO, root,
+ &frontswap_failed_stores);
+ debugfs_create_u64("invalidates", S_IRUGO,
+ root, &frontswap_invalidates);
+#endif
+ return 0;
+}
+
+module_init(init_frontswap);
/*
* in mm/page_alloc.c
*/
-extern void set_pageblock_migratetype(struct page *page, int migratetype);
-extern int move_freepages_block(struct zone *zone, struct page *page,
- int migratetype);
extern void __free_pages_bootmem(struct page *page, unsigned int order);
extern void prep_compound_page(struct page *page, unsigned long order);
#ifdef CONFIG_MEMORY_FAILURE
#endif
#if defined CONFIG_COMPACTION || defined CONFIG_CMA
-#include <linux/compaction.h>
/*
* in mm/compaction.c
unsigned long nr_migratepages; /* Number of pages to migrate */
unsigned long free_pfn; /* isolate_freepages search base */
unsigned long migrate_pfn; /* isolate_migratepages search base */
- enum compact_mode mode; /* Compaction mode */
+ bool sync; /* Synchronous migration */
int order; /* order a direct compactor needs */
int migratetype; /* MOVABLE, RECLAIMABLE etc */
struct zone *zone;
-
- /* Number of UNMOVABLE destination pageblocks skipped during scan */
- unsigned long nr_pageblocks_skipped;
};
unsigned long
#include <linux/sched.h>
#include <linux/ksm.h>
#include <linux/fs.h>
+#include <linux/file.h>
/*
* Any behaviour which results in changes to the vma->vm_flags needs to
{
loff_t offset;
int error;
+ struct file *f;
*prev = NULL; /* tell sys_madvise we drop mmap_sem */
if (vma->vm_flags & (VM_LOCKED|VM_NONLINEAR|VM_HUGETLB))
return -EINVAL;
- if (!vma->vm_file || !vma->vm_file->f_mapping
- || !vma->vm_file->f_mapping->host) {
+ f = vma->vm_file;
+
+ if (!f || !f->f_mapping || !f->f_mapping->host) {
return -EINVAL;
}
offset = (loff_t)(start - vma->vm_start)
+ ((loff_t)vma->vm_pgoff << PAGE_SHIFT);
- /* filesystem's fallocate may need to take i_mutex */
+ /*
+ * Filesystem's fallocate may need to take i_mutex. We need to
+ * explicitly grab a reference because the vma (and hence the
+ * vma's reference to the file) can go away as soon as we drop
+ * mmap_sem.
+ */
+ get_file(f);
up_read(¤t->mm->mmap_sem);
- error = do_fallocate(vma->vm_file,
+ error = do_fallocate(f,
FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE,
offset, end - start);
+ fput(f);
down_read(¤t->mm->mmap_sem);
return error;
}
MAX_NUMNODES);
}
-/*
- * Free memblock.reserved.regions
- */
-int __init_memblock memblock_free_reserved_regions(void)
-{
- if (memblock.reserved.regions == memblock_reserved_init_regions)
- return 0;
-
- return memblock_free(__pa(memblock.reserved.regions),
- sizeof(struct memblock_region) * memblock.reserved.max);
-}
-
-/*
- * Reserve memblock.reserved.regions
- */
-int __init_memblock memblock_reserve_reserved_regions(void)
-{
- if (memblock.reserved.regions == memblock_reserved_init_regions)
- return 0;
-
- return memblock_reserve(__pa(memblock.reserved.regions),
- sizeof(struct memblock_region) * memblock.reserved.max);
-}
-
static void __init_memblock memblock_remove_region(struct memblock_type *type, unsigned long r)
{
type->total_size -= type->regions[r].size;
}
}
-static int __init_memblock memblock_double_array(struct memblock_type *type)
+phys_addr_t __init_memblock get_allocated_memblock_reserved_regions_info(
+ phys_addr_t *addr)
+{
+ if (memblock.reserved.regions == memblock_reserved_init_regions)
+ return 0;
+
+ *addr = __pa(memblock.reserved.regions);
+
+ return PAGE_ALIGN(sizeof(struct memblock_region) *
+ memblock.reserved.max);
+}
+
+/**
+ * memblock_double_array - double the size of the memblock regions array
+ * @type: memblock type of the regions array being doubled
+ * @new_area_start: starting address of memory range to avoid overlap with
+ * @new_area_size: size of memory range to avoid overlap with
+ *
+ * Double the size of the @type regions array. If memblock is being used to
+ * allocate memory for a new reserved regions array and there is a previously
+ * allocated memory range [@new_area_start,@new_area_start+@new_area_size]
+ * waiting to be reserved, ensure the memory used by the new array does
+ * not overlap.
+ *
+ * RETURNS:
+ * 0 on success, -1 on failure.
+ */
+static int __init_memblock memblock_double_array(struct memblock_type *type,
+ phys_addr_t new_area_start,
+ phys_addr_t new_area_size)
{
struct memblock_region *new_array, *old_array;
+ phys_addr_t old_alloc_size, new_alloc_size;
phys_addr_t old_size, new_size, addr;
int use_slab = slab_is_available();
int *in_slab;
/* Calculate new doubled size */
old_size = type->max * sizeof(struct memblock_region);
new_size = old_size << 1;
+ /*
+ * We need to allocated new one align to PAGE_SIZE,
+ * so we can free them completely later.
+ */
+ old_alloc_size = PAGE_ALIGN(old_size);
+ new_alloc_size = PAGE_ALIGN(new_size);
/* Retrieve the slab flag */
if (type == &memblock.memory)
new_array = kmalloc(new_size, GFP_KERNEL);
addr = new_array ? __pa(new_array) : 0;
} else {
- addr = memblock_find_in_range(0, MEMBLOCK_ALLOC_ACCESSIBLE, new_size, sizeof(phys_addr_t));
+ /* only exclude range when trying to double reserved.regions */
+ if (type != &memblock.reserved)
+ new_area_start = new_area_size = 0;
+
+ addr = memblock_find_in_range(new_area_start + new_area_size,
+ memblock.current_limit,
+ new_alloc_size, PAGE_SIZE);
+ if (!addr && new_area_size)
+ addr = memblock_find_in_range(0,
+ min(new_area_start, memblock.current_limit),
+ new_alloc_size, PAGE_SIZE);
+
new_array = addr ? __va(addr) : 0;
}
if (!addr) {
kfree(old_array);
else if (old_array != memblock_memory_init_regions &&
old_array != memblock_reserved_init_regions)
- memblock_free(__pa(old_array), old_size);
+ memblock_free(__pa(old_array), old_alloc_size);
/* Reserve the new array if that comes from the memblock.
* Otherwise, we needn't do it
*/
if (!use_slab)
- BUG_ON(memblock_reserve(addr, new_size));
+ BUG_ON(memblock_reserve(addr, new_alloc_size));
/* Update slab flag */
*in_slab = use_slab;
*/
if (!insert) {
while (type->cnt + nr_new > type->max)
- if (memblock_double_array(type) < 0)
+ if (memblock_double_array(type, obase, size) < 0)
return -ENOMEM;
insert = true;
goto repeat;
/* we'll create at most two more regions */
while (type->cnt + 2 > type->max)
- if (memblock_double_array(type) < 0)
+ if (memblock_double_array(type, base, size) < 0)
return -ENOMEM;
for (i = 0; i < type->cnt; i++) {
* __next_free_mem_range - next function for for_each_free_mem_range()
* @idx: pointer to u64 loop variable
* @nid: nid: node selector, %MAX_NUMNODES for all nodes
- * @p_start: ptr to phys_addr_t for start address of the range, can be %NULL
- * @p_end: ptr to phys_addr_t for end address of the range, can be %NULL
- * @p_nid: ptr to int for nid of the range, can be %NULL
+ * @out_start: ptr to phys_addr_t for start address of the range, can be %NULL
+ * @out_end: ptr to phys_addr_t for end address of the range, can be %NULL
+ * @out_nid: ptr to int for nid of the range, can be %NULL
*
* Find the first free area from *@idx which matches @nid, fill the out
* parameters, and update *@idx for the next iteration. The lower 32bit of
* __next_free_mem_range_rev - next function for for_each_free_mem_range_reverse()
* @idx: pointer to u64 loop variable
* @nid: nid: node selector, %MAX_NUMNODES for all nodes
- * @p_start: ptr to phys_addr_t for start address of the range, can be %NULL
- * @p_end: ptr to phys_addr_t for end address of the range, can be %NULL
- * @p_nid: ptr to int for nid of the range, can be %NULL
+ * @out_start: ptr to phys_addr_t for start address of the range, can be %NULL
+ * @out_end: ptr to phys_addr_t for end address of the range, can be %NULL
+ * @out_nid: ptr to int for nid of the range, can be %NULL
*
* Reverse of __next_free_mem_range().
*/
return memblock_search(&memblock.memory, addr) != -1;
}
+/**
+ * memblock_is_region_memory - check if a region is a subset of memory
+ * @base: base of region to check
+ * @size: size of region to check
+ *
+ * Check if the region [@base, @base+@size) is a subset of a memory block.
+ *
+ * RETURNS:
+ * 0 if false, non-zero if true
+ */
int __init_memblock memblock_is_region_memory(phys_addr_t base, phys_addr_t size)
{
int idx = memblock_search(&memblock.memory, base);
memblock.memory.regions[idx].size) >= end;
}
+/**
+ * memblock_is_region_reserved - check if a region intersects reserved memory
+ * @base: base of region to check
+ * @size: size of region to check
+ *
+ * Check if the region [@base, @base+@size) intersects a reserved memory block.
+ *
+ * RETURNS:
+ * 0 if false, non-zero if true
+ */
int __init_memblock memblock_is_region_reserved(phys_addr_t base, phys_addr_t size)
{
memblock_cap_size(base, &size);
{
if (root_memcg == memcg)
return true;
- if (!root_memcg->use_hierarchy)
+ if (!root_memcg->use_hierarchy || !memcg)
return false;
return css_is_ancestor(&memcg->css, &root_memcg->css);
}
/**
* mem_cgroup_margin - calculate chargeable space of a memory cgroup
- * @mem: the memory cgroup
+ * @memcg: the memory cgroup
*
* Returns the maximum amount of memory @mem can be charged with, in
* pages.
/**
* test_mem_cgroup_node_reclaimable
- * @mem: the target memcg
+ * @memcg: the target memcg
* @nid: the node ID to be checked.
* @noswap : specify true here if the user wants flle only information.
*
next = pmd_addr_end(addr, end);
if (pmd_trans_huge(*pmd)) {
if (next - addr != HPAGE_PMD_SIZE) {
- VM_BUG_ON(!rwsem_is_locked(&tlb->mm->mmap_sem));
+#ifdef CONFIG_DEBUG_VM
+ if (!rwsem_is_locked(&tlb->mm->mmap_sem)) {
+ pr_err("%s: mmap_sem is unlocked! addr=0x%lx end=0x%lx vma->vm_start=0x%lx vma->vm_end=0x%lx\n",
+ __func__, addr, end,
+ vma->vm_start,
+ vma->vm_end);
+ BUG();
+ }
+#endif
split_huge_page_pmd(vma->vm_mm, pmd);
} else if (zap_huge_pmd(tlb, vma, pmd, addr))
goto next;
/**
* zap_page_range - remove user pages in a given range
* @vma: vm_area_struct holding the applicable pages
- * @address: starting address of pages to zap
+ * @start: starting address of pages to zap
* @size: number of bytes to zap
* @details: details of nonlinear truncation or shared cache invalidation
*
pgdat = hotadd_new_pgdat(nid, start);
ret = -ENOMEM;
if (!pgdat)
- goto out;
+ goto error;
new_pgdat = 1;
}
if (!list_empty(&pagelist)) {
nr_failed = migrate_pages(&pagelist, new_vma_page,
(unsigned long)vma,
- false, true);
+ false, MIGRATE_SYNC);
if (nr_failed)
putback_lru_pages(&pagelist);
}
* is actually a signal that all of the page has become dirty.
* Whereas only part of our page may be dirty.
*/
- __set_page_dirty_nobuffers(newpage);
+ if (PageSwapBacked(page))
+ SetPageDirty(newpage);
+ else
+ __set_page_dirty_nobuffers(newpage);
}
mlock_migrate_page(newpage, page);
__free_pages_bootmem(pfn_to_page(i), 0);
}
+static unsigned long __init __free_memory_core(phys_addr_t start,
+ phys_addr_t end)
+{
+ unsigned long start_pfn = PFN_UP(start);
+ unsigned long end_pfn = min_t(unsigned long,
+ PFN_DOWN(end), max_low_pfn);
+
+ if (start_pfn > end_pfn)
+ return 0;
+
+ __free_pages_memory(start_pfn, end_pfn);
+
+ return end_pfn - start_pfn;
+}
+
unsigned long __init free_low_memory_core_early(int nodeid)
{
unsigned long count = 0;
- phys_addr_t start, end;
+ phys_addr_t start, end, size;
u64 i;
- /* free reserved array temporarily so that it's treated as free area */
- memblock_free_reserved_regions();
-
- for_each_free_mem_range(i, MAX_NUMNODES, &start, &end, NULL) {
- unsigned long start_pfn = PFN_UP(start);
- unsigned long end_pfn = min_t(unsigned long,
- PFN_DOWN(end), max_low_pfn);
- if (start_pfn < end_pfn) {
- __free_pages_memory(start_pfn, end_pfn);
- count += end_pfn - start_pfn;
- }
- }
+ for_each_free_mem_range(i, MAX_NUMNODES, &start, &end, NULL)
+ count += __free_memory_core(start, end);
+
+ /* free range that is used for reserved array if we allocate it */
+ size = get_allocated_memblock_reserved_regions_info(&start);
+ if (size)
+ count += __free_memory_core(start, start + size);
- /* put region array back? */
- memblock_reserve_reserved_regions();
return count;
}
return ___alloc_bootmem(size, align, goal, limit);
}
-static void * __init ___alloc_bootmem_node_nopanic(pg_data_t *pgdat,
+void * __init ___alloc_bootmem_node_nopanic(pg_data_t *pgdat,
unsigned long size,
unsigned long align,
unsigned long goal,
flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
- ret = vm_mmap_pgoff(file, addr, len, prot, flags, pgoff);
+ retval = vm_mmap_pgoff(file, addr, len, prot, flags, pgoff);
if (file)
fput(file);
unsigned long oom_badness(struct task_struct *p, struct mem_cgroup *memcg,
const nodemask_t *nodemask, unsigned long totalpages)
{
- unsigned long points;
+ long points;
+ long adj;
if (oom_unkillable_task(p, memcg, nodemask))
return 0;
if (!p)
return 0;
- if (p->signal->oom_score_adj == OOM_SCORE_ADJ_MIN) {
+ adj = p->signal->oom_score_adj;
+ if (adj == OOM_SCORE_ADJ_MIN) {
task_unlock(p);
return 0;
}
* implementation used by LSMs.
*/
if (has_capability_noaudit(p, CAP_SYS_ADMIN))
- points -= 30 * totalpages / 1000;
+ adj -= 30;
- /*
- * /proc/pid/oom_score_adj ranges from -1000 to +1000 such that it may
- * either completely disable oom killing or always prefer a certain
- * task.
- */
- points += p->signal->oom_score_adj * totalpages / 1000;
+ /* Normalize to oom_score_adj units */
+ adj *= totalpages / 1000;
+ points += adj;
/*
* Never return 0 for an eligible task regardless of the root bonus and
* oom_score_adj (oom_score_adj can't be OOM_SCORE_ADJ_MIN here).
*/
- return points ? points : 1;
+ return points > 0 ? points : 1;
}
/*
/**
* dump_tasks - dump current memory state of all system tasks
- * @mem: current's memory controller, if constrained
+ * @memcg: current's memory controller, if constrained
* @nodemask: nodemask passed to page allocator for mempolicy ooms
*
* Dumps the current memory state of all eligible tasks. Tasks not in the same
int page_group_by_mobility_disabled __read_mostly;
-void set_pageblock_migratetype(struct page *page, int migratetype)
+static void set_pageblock_migratetype(struct page *page, int migratetype)
{
if (unlikely(page_group_by_mobility_disabled))
return pages_moved;
}
-int move_freepages_block(struct zone *zone, struct page *page,
- int migratetype)
+static int move_freepages_block(struct zone *zone, struct page *page,
+ int migratetype)
{
unsigned long start_pfn, end_pfn;
struct page *start_page, *end_page;
__alloc_contig_migrate_alloc(struct page *page, unsigned long private,
int **resultp)
{
- return alloc_page(GFP_HIGHUSER_MOVABLE);
+ gfp_t gfp_mask = GFP_USER | __GFP_MOVABLE;
+
+ if (PageHighMem(page))
+ gfp_mask |= __GFP_HIGHMEM;
+
+ return alloc_page(gfp_mask);
}
/* [start, end) must belong to a single zone. */
.nr_migratepages = 0,
.order = -1,
.zone = page_zone(pfn_to_page(start)),
- .mode = COMPACT_SYNC,
+ .sync = true,
};
INIT_LIST_HEAD(&cc.migratepages);
/**
* swap_cgroup_cmpxchg - cmpxchg mem_cgroup's id for this swp_entry.
- * @end: swap entry to be cmpxchged
+ * @ent: swap entry to be cmpxchged
* @old: old id
* @new: new id
*
/**
* swap_cgroup_record - record mem_cgroup for this swp_entry.
* @ent: swap entry to be recorded into
- * @mem: mem_cgroup to be recorded
+ * @id: mem_cgroup to be recorded
*
* Returns old value at success, 0 at failure.
* (Of course, old value can be 0.)
#include <linux/bio.h>
#include <linux/swapops.h>
#include <linux/writeback.h>
+#include <linux/frontswap.h>
#include <asm/pgtable.h>
static struct bio *get_swap_bio(gfp_t gfp_flags,
unlock_page(page);
goto out;
}
+ if (frontswap_store(page) == 0) {
+ set_page_writeback(page);
+ unlock_page(page);
+ end_page_writeback(page);
+ goto out;
+ }
bio = get_swap_bio(GFP_NOIO, page, end_swap_bio_write);
if (bio == NULL) {
set_page_dirty(page);
VM_BUG_ON(!PageLocked(page));
VM_BUG_ON(PageUptodate(page));
+ if (frontswap_load(page) == 0) {
+ SetPageUptodate(page);
+ unlock_page(page);
+ goto out;
+ }
bio = get_swap_bio(GFP_KERNEL, page, end_swap_bio_read);
if (bio == NULL) {
unlock_page(page);
/**
* walk_page_range - walk a memory map's page tables with a callback
- * @mm: memory map to walk
* @addr: starting address
* @end: ending address
* @walk: set of callbacks to invoke for each level of the tree
* @chunk: chunk to depopulate
* @off: offset to the area to depopulate
* @size: size of the area to depopulate in bytes
- * @flush: whether to flush cache and tlb or not
*
* For each cpu, depopulate and unmap pages [@page_start,@page_end)
* from @chunk. If @flush is true, vcache is flushed before unmapping
return 0;
}
+/*
+ * Sometimes, before we decide whether to proceed or to fail, we must check
+ * that an entry was not already brought back from swap by a racing thread.
+ *
+ * Checking page is not enough: by the time a SwapCache page is locked, it
+ * might be reused, and again be SwapCache, using the same swap as before.
+ */
+static bool shmem_confirm_swap(struct address_space *mapping,
+ pgoff_t index, swp_entry_t swap)
+{
+ void *item;
+
+ rcu_read_lock();
+ item = radix_tree_lookup(&mapping->page_tree, index);
+ rcu_read_unlock();
+ return item == swp_to_radix_entry(swap);
+}
+
/*
* Like add_to_page_cache_locked, but error if expected item has gone.
*/
struct address_space *mapping,
pgoff_t index, gfp_t gfp, void *expected)
{
- int error = 0;
+ int error;
VM_BUG_ON(!PageLocked(page));
VM_BUG_ON(!PageSwapBacked(page));
+ page_cache_get(page);
+ page->mapping = mapping;
+ page->index = index;
+
+ spin_lock_irq(&mapping->tree_lock);
if (!expected)
- error = radix_tree_preload(gfp & GFP_RECLAIM_MASK);
+ error = radix_tree_insert(&mapping->page_tree, index, page);
+ else
+ error = shmem_radix_tree_replace(mapping, index, expected,
+ page);
if (!error) {
- page_cache_get(page);
- page->mapping = mapping;
- page->index = index;
-
- spin_lock_irq(&mapping->tree_lock);
- if (!expected)
- error = radix_tree_insert(&mapping->page_tree,
- index, page);
- else
- error = shmem_radix_tree_replace(mapping, index,
- expected, page);
- if (!error) {
- mapping->nrpages++;
- __inc_zone_page_state(page, NR_FILE_PAGES);
- __inc_zone_page_state(page, NR_SHMEM);
- spin_unlock_irq(&mapping->tree_lock);
- } else {
- page->mapping = NULL;
- spin_unlock_irq(&mapping->tree_lock);
- page_cache_release(page);
- }
- if (!expected)
- radix_tree_preload_end();
+ mapping->nrpages++;
+ __inc_zone_page_state(page, NR_FILE_PAGES);
+ __inc_zone_page_state(page, NR_SHMEM);
+ spin_unlock_irq(&mapping->tree_lock);
+ } else {
+ page->mapping = NULL;
+ spin_unlock_irq(&mapping->tree_lock);
+ page_cache_release(page);
}
- if (error)
- mem_cgroup_uncharge_cache_page(page);
return error;
}
mutex_lock(&shmem_swaplist_mutex);
/*
* We needed to drop mutex to make that restrictive page
- * allocation; but the inode might already be freed by now,
- * and we cannot refer to inode or mapping or info to check.
- * However, we do hold page lock on the PageSwapCache page,
- * so can check if that still has our reference remaining.
+ * allocation, but the inode might have been freed while we
+ * dropped it: although a racing shmem_evict_inode() cannot
+ * complete without emptying the radix_tree, our page lock
+ * on this swapcache page is not enough to prevent that -
+ * free_swap_and_cache() of our swap entry will only
+ * trylock_page(), removing swap from radix_tree whatever.
+ *
+ * We must not proceed to shmem_add_to_page_cache() if the
+ * inode has been freed, but of course we cannot rely on
+ * inode or mapping or info to check that. However, we can
+ * safely check if our swap entry is still in use (and here
+ * it can't have got reused for another page): if it's still
+ * in use, then the inode cannot have been freed yet, and we
+ * can safely proceed (if it's no longer in use, that tells
+ * nothing about the inode, but we don't need to unuse swap).
*/
if (!page_swapcount(*pagep))
error = -ENOENT;
/*
* There's a faint possibility that swap page was replaced before
- * caller locked it: it will come back later with the right page.
+ * caller locked it: caller will come back later with the right page.
*/
- if (unlikely(!PageSwapCache(page)))
+ if (unlikely(!PageSwapCache(page) || page_private(page) != swap.val))
goto out;
/*
newpage = shmem_alloc_page(gfp, info, index);
if (!newpage)
return -ENOMEM;
- VM_BUG_ON(shmem_should_replace_page(newpage, gfp));
- *pagep = newpage;
page_cache_get(newpage);
copy_highpage(newpage, oldpage);
+ flush_dcache_page(newpage);
- VM_BUG_ON(!PageLocked(oldpage));
__set_page_locked(newpage);
- VM_BUG_ON(!PageUptodate(oldpage));
SetPageUptodate(newpage);
- VM_BUG_ON(!PageSwapBacked(oldpage));
SetPageSwapBacked(newpage);
- VM_BUG_ON(!swap_index);
set_page_private(newpage, swap_index);
- VM_BUG_ON(!PageSwapCache(oldpage));
SetPageSwapCache(newpage);
/*
spin_lock_irq(&swap_mapping->tree_lock);
error = shmem_radix_tree_replace(swap_mapping, swap_index, oldpage,
newpage);
- __inc_zone_page_state(newpage, NR_FILE_PAGES);
- __dec_zone_page_state(oldpage, NR_FILE_PAGES);
+ if (!error) {
+ __inc_zone_page_state(newpage, NR_FILE_PAGES);
+ __dec_zone_page_state(oldpage, NR_FILE_PAGES);
+ }
spin_unlock_irq(&swap_mapping->tree_lock);
- BUG_ON(error);
- mem_cgroup_replace_page_cache(oldpage, newpage);
- lru_cache_add_anon(newpage);
+ if (unlikely(error)) {
+ /*
+ * Is this possible? I think not, now that our callers check
+ * both PageSwapCache and page_private after getting page lock;
+ * but be defensive. Reverse old to newpage for clear and free.
+ */
+ oldpage = newpage;
+ } else {
+ mem_cgroup_replace_page_cache(oldpage, newpage);
+ lru_cache_add_anon(newpage);
+ *pagep = newpage;
+ }
ClearPageSwapCache(oldpage);
set_page_private(oldpage, 0);
unlock_page(oldpage);
page_cache_release(oldpage);
page_cache_release(oldpage);
- return 0;
+ return error;
}
/*
/* We have to do this with page locked to prevent races */
lock_page(page);
- if (!PageSwapCache(page) || page->mapping) {
+ if (!PageSwapCache(page) || page_private(page) != swap.val ||
+ !shmem_confirm_swap(mapping, index, swap)) {
error = -EEXIST; /* try again */
- goto failed;
+ goto unlock;
}
if (!PageUptodate(page)) {
error = -EIO;
error = mem_cgroup_cache_charge(page, current->mm,
gfp & GFP_RECLAIM_MASK);
- if (!error)
+ if (!error) {
error = shmem_add_to_page_cache(page, mapping, index,
gfp, swp_to_radix_entry(swap));
+ /* We already confirmed swap, and make no allocation */
+ VM_BUG_ON(error);
+ }
if (error)
goto failed;
__set_page_locked(page);
error = mem_cgroup_cache_charge(page, current->mm,
gfp & GFP_RECLAIM_MASK);
- if (!error)
- error = shmem_add_to_page_cache(page, mapping, index,
- gfp, NULL);
if (error)
goto decused;
+ error = radix_tree_preload(gfp & GFP_RECLAIM_MASK);
+ if (!error) {
+ error = shmem_add_to_page_cache(page, mapping, index,
+ gfp, NULL);
+ radix_tree_preload_end();
+ }
+ if (error) {
+ mem_cgroup_uncharge_cache_page(page);
+ goto decused;
+ }
lru_cache_add_anon(page);
spin_lock(&info->lock);
unacct:
shmem_unacct_blocks(info->flags, 1);
failed:
- if (swap.val && error != -EINVAL) {
- struct page *test = find_get_page(mapping, index);
- if (test && !radix_tree_exceptional_entry(test))
- page_cache_release(test);
- /* Have another try if the entry has changed */
- if (test != swp_to_radix_entry(swap))
- error = -EEXIST;
- }
+ if (swap.val && error != -EINVAL &&
+ !shmem_confirm_swap(mapping, index, swap))
+ error = -EEXIST;
+unlock:
if (page) {
unlock_page(page);
page_cache_release(page);
spin_unlock(&info->lock);
goto repeat;
}
- if (error == -EEXIST)
+ if (error == -EEXIST) /* from above or from radix_tree_insert */
goto repeat;
return error;
}
struct splice_pipe_desc spd = {
.pages = pages,
.partial = partial,
+ .nr_pages_max = PIPE_DEF_BUFFERS,
.flags = flags,
.ops = &page_cache_pipe_buf_ops,
.spd_release = spd_release_page,
if (spd.nr_pages)
error = splice_to_pipe(pipe, &spd);
- splice_shrink_spd(pipe, &spd);
+ splice_shrink_spd(&spd);
if (error > 0) {
*ppos += error;
return error;
}
-/*
- * llseek SEEK_DATA or SEEK_HOLE through the radix_tree.
- */
-static pgoff_t shmem_seek_hole_data(struct address_space *mapping,
- pgoff_t index, pgoff_t end, int origin)
-{
- struct page *page;
- struct pagevec pvec;
- pgoff_t indices[PAGEVEC_SIZE];
- bool done = false;
- int i;
-
- pagevec_init(&pvec, 0);
- pvec.nr = 1; /* start small: we may be there already */
- while (!done) {
- pvec.nr = shmem_find_get_pages_and_swap(mapping, index,
- pvec.nr, pvec.pages, indices);
- if (!pvec.nr) {
- if (origin == SEEK_DATA)
- index = end;
- break;
- }
- for (i = 0; i < pvec.nr; i++, index++) {
- if (index < indices[i]) {
- if (origin == SEEK_HOLE) {
- done = true;
- break;
- }
- index = indices[i];
- }
- page = pvec.pages[i];
- if (page && !radix_tree_exceptional_entry(page)) {
- if (!PageUptodate(page))
- page = NULL;
- }
- if (index >= end ||
- (page && origin == SEEK_DATA) ||
- (!page && origin == SEEK_HOLE)) {
- done = true;
- break;
- }
- }
- shmem_deswap_pagevec(&pvec);
- pagevec_release(&pvec);
- pvec.nr = PAGEVEC_SIZE;
- cond_resched();
- }
- return index;
-}
-
-static loff_t shmem_file_llseek(struct file *file, loff_t offset, int origin)
-{
- struct address_space *mapping;
- struct inode *inode;
- pgoff_t start, end;
- loff_t new_offset;
-
- if (origin != SEEK_DATA && origin != SEEK_HOLE)
- return generic_file_llseek_size(file, offset, origin,
- MAX_LFS_FILESIZE);
- mapping = file->f_mapping;
- inode = mapping->host;
- mutex_lock(&inode->i_mutex);
- /* We're holding i_mutex so we can access i_size directly */
-
- if (offset < 0)
- offset = -EINVAL;
- else if (offset >= inode->i_size)
- offset = -ENXIO;
- else {
- start = offset >> PAGE_CACHE_SHIFT;
- end = (inode->i_size + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
- new_offset = shmem_seek_hole_data(mapping, start, end, origin);
- new_offset <<= PAGE_CACHE_SHIFT;
- if (new_offset > offset) {
- if (new_offset < inode->i_size)
- offset = new_offset;
- else if (origin == SEEK_DATA)
- offset = -ENXIO;
- else
- offset = inode->i_size;
- }
- }
-
- if (offset >= 0 && offset != file->f_pos) {
- file->f_pos = offset;
- file->f_version = 0;
- }
- mutex_unlock(&inode->i_mutex);
- return offset;
-}
-
static long shmem_fallocate(struct file *file, int mode, loff_t offset,
loff_t len)
{
static const struct file_operations shmem_file_operations = {
.mmap = shmem_mmap,
#ifdef CONFIG_TMPFS
- .llseek = shmem_file_llseek,
+ .llseek = generic_file_llseek,
.read = do_sync_read,
.write = do_sync_write,
.aio_read = shmem_file_aio_read,
sparse_early_usemaps_alloc_pgdat_section(struct pglist_data *pgdat,
unsigned long size)
{
- pg_data_t *host_pgdat;
- unsigned long goal;
+ unsigned long goal, limit;
+ unsigned long *p;
+ int nid;
/*
* A page may contain usemaps for other sections preventing the
* page being freed and making a section unremovable while
* from the same section as the pgdat where possible to avoid
* this problem.
*/
- goal = __pa(pgdat) & PAGE_SECTION_MASK;
- host_pgdat = NODE_DATA(early_pfn_to_nid(goal >> PAGE_SHIFT));
- return __alloc_bootmem_node_nopanic(host_pgdat, size,
- SMP_CACHE_BYTES, goal);
+ goal = __pa(pgdat) & (PAGE_SECTION_MASK << PAGE_SHIFT);
+ limit = goal + (1UL << PA_SECTION_SHIFT);
+ nid = early_pfn_to_nid(goal >> PAGE_SHIFT);
+again:
+ p = ___alloc_bootmem_node_nopanic(NODE_DATA(nid), size,
+ SMP_CACHE_BYTES, goal, limit);
+ if (!p && limit) {
+ limit = 0;
+ goto again;
+ }
+ return p;
}
static void __init check_usemap_section_nr(int nid, unsigned long *usemap)
#include <linux/memcontrol.h>
#include <linux/poll.h>
#include <linux/oom.h>
+#include <linux/frontswap.h>
+#include <linux/swapfile.h>
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
static void free_swap_count_continuations(struct swap_info_struct *);
static sector_t map_swap_entry(swp_entry_t, struct block_device**);
-static DEFINE_SPINLOCK(swap_lock);
+DEFINE_SPINLOCK(swap_lock);
static unsigned int nr_swapfiles;
long nr_swap_pages;
long total_swap_pages;
static const char Bad_offset[] = "Bad swap offset entry ";
static const char Unused_offset[] = "Unused swap offset entry ";
-static struct swap_list_t swap_list = {-1, -1};
+struct swap_list_t swap_list = {-1, -1};
-static struct swap_info_struct *swap_info[MAX_SWAPFILES];
+struct swap_info_struct *swap_info[MAX_SWAPFILES];
static DEFINE_MUTEX(swapon_mutex);
swap_list.next = p->type;
nr_swap_pages++;
p->inuse_pages--;
+ frontswap_invalidate_page(p->type, offset);
if ((p->flags & SWP_BLKDEV) &&
disk->fops->swap_slot_free_notify)
disk->fops->swap_slot_free_notify(p->bdev, offset);
}
/*
- * Scan swap_map from current position to next entry still in use.
+ * Scan swap_map (or frontswap_map if frontswap parameter is true)
+ * from current position to next entry still in use.
* Recycle to start on reaching the end, returning 0 when empty.
*/
static unsigned int find_next_to_unuse(struct swap_info_struct *si,
- unsigned int prev)
+ unsigned int prev, bool frontswap)
{
unsigned int max = si->max;
unsigned int i = prev;
prev = 0;
i = 1;
}
+ if (frontswap) {
+ if (frontswap_test(si, i))
+ break;
+ else
+ continue;
+ }
count = si->swap_map[i];
if (count && swap_count(count) != SWAP_MAP_BAD)
break;
* We completely avoid races by reading each swap page in advance,
* and then search for the process using it. All the necessary
* page table adjustments can then be made atomically.
+ *
+ * if the boolean frontswap is true, only unuse pages_to_unuse pages;
+ * pages_to_unuse==0 means all pages; ignored if frontswap is false
*/
-static int try_to_unuse(unsigned int type)
+int try_to_unuse(unsigned int type, bool frontswap,
+ unsigned long pages_to_unuse)
{
struct swap_info_struct *si = swap_info[type];
struct mm_struct *start_mm;
* one pass through swap_map is enough, but not necessarily:
* there are races when an instance of an entry might be missed.
*/
- while ((i = find_next_to_unuse(si, i)) != 0) {
+ while ((i = find_next_to_unuse(si, i, frontswap)) != 0) {
if (signal_pending(current)) {
retval = -EINTR;
break;
* interactive performance.
*/
cond_resched();
+ if (frontswap && pages_to_unuse > 0) {
+ if (!--pages_to_unuse)
+ break;
+ }
}
mmput(start_mm);
}
static void enable_swap_info(struct swap_info_struct *p, int prio,
- unsigned char *swap_map)
+ unsigned char *swap_map,
+ unsigned long *frontswap_map)
{
int i, prev;
else
p->prio = --least_priority;
p->swap_map = swap_map;
+ frontswap_map_set(p, frontswap_map);
p->flags |= SWP_WRITEOK;
nr_swap_pages += p->pages;
total_swap_pages += p->pages;
swap_list.head = swap_list.next = p->type;
else
swap_info[prev]->next = p->type;
+ frontswap_init(p->type);
spin_unlock(&swap_lock);
}
spin_unlock(&swap_lock);
oom_score_adj = test_set_oom_score_adj(OOM_SCORE_ADJ_MAX);
- err = try_to_unuse(type);
+ err = try_to_unuse(type, false, 0); /* force all pages to be unused */
compare_swap_oom_score_adj(OOM_SCORE_ADJ_MAX, oom_score_adj);
if (err) {
* sys_swapoff for this swap_info_struct at this point.
*/
/* re-insert swap space back into swap_list */
- enable_swap_info(p, p->prio, p->swap_map);
+ enable_swap_info(p, p->prio, p->swap_map, frontswap_map_get(p));
goto out_dput;
}
swap_map = p->swap_map;
p->swap_map = NULL;
p->flags = 0;
+ frontswap_invalidate_area(type);
spin_unlock(&swap_lock);
mutex_unlock(&swapon_mutex);
vfree(swap_map);
+ vfree(frontswap_map_get(p));
/* Destroy swap account informatin */
swap_cgroup_swapoff(type);
/*
* Find out how many pages are allowed for a single swap
- * device. There are three limiting factors: 1) the number
+ * device. There are two limiting factors: 1) the number
* of bits for the swap offset in the swp_entry_t type, and
* 2) the number of bits in the swap pte as defined by the
- * the different architectures, and 3) the number of free bits
- * in an exceptional radix_tree entry. In order to find the
+ * different architectures. In order to find the
* largest possible bit mask, a swap entry with swap type 0
* and swap offset ~0UL is created, encoded to a swap pte,
* decoded to a swp_entry_t again, and finally the swap
* offset is extracted. This will mask all the bits from
* the initial ~0UL mask that can't be encoded in either
* the swp_entry_t or the architecture definition of a
- * swap pte. Then the same is done for a radix_tree entry.
+ * swap pte.
*/
maxpages = swp_offset(pte_to_swp_entry(
- swp_entry_to_pte(swp_entry(0, ~0UL))));
- maxpages = swp_offset(radix_to_swp_entry(
- swp_to_radix_entry(swp_entry(0, maxpages)))) + 1;
-
+ swp_entry_to_pte(swp_entry(0, ~0UL)))) + 1;
if (maxpages > swap_header->info.last_page) {
maxpages = swap_header->info.last_page + 1;
/* p->max is an unsigned int: don't overflow it */
sector_t span;
unsigned long maxpages;
unsigned char *swap_map = NULL;
+ unsigned long *frontswap_map = NULL;
struct page *page = NULL;
struct inode *inode = NULL;
error = nr_extents;
goto bad_swap;
}
+ /* frontswap enabled? set up bit-per-page map for frontswap */
+ if (frontswap_enabled)
+ frontswap_map = vzalloc(maxpages / sizeof(long));
if (p->bdev) {
if (blk_queue_nonrot(bdev_get_queue(p->bdev))) {
if (swap_flags & SWAP_FLAG_PREFER)
prio =
(swap_flags & SWAP_FLAG_PRIO_MASK) >> SWAP_FLAG_PRIO_SHIFT;
- enable_swap_info(p, prio, swap_map);
+ enable_swap_info(p, prio, swap_map, frontswap_map);
printk(KERN_INFO "Adding %uk swap on %s. "
- "Priority:%d extents:%d across:%lluk %s%s\n",
+ "Priority:%d extents:%d across:%lluk %s%s%s\n",
p->pages<<(PAGE_SHIFT-10), name, p->prio,
nr_extents, (unsigned long long)span<<(PAGE_SHIFT-10),
(p->flags & SWP_SOLIDSTATE) ? "SS" : "",
- (p->flags & SWP_DISCARDABLE) ? "D" : "");
+ (p->flags & SWP_DISCARDABLE) ? "D" : "",
+ (frontswap_map) ? "FS" : "");
mutex_unlock(&swapon_mutex);
atomic_inc(&proc_poll_event);
* them before going back to sleep.
*/
set_pgdat_percpu_threshold(pgdat, calculate_normal_threshold);
- schedule();
+
+ if (!kthread_should_stop())
+ schedule();
+
set_pgdat_percpu_threshold(pgdat, calculate_pressure_threshold);
} else {
if (remaining)
}
/*
- * Called by memory hotplug when all memory in a node is offlined.
+ * Called by memory hotplug when all memory in a node is offlined. Caller must
+ * hold lock_memory_hotplug().
*/
void kswapd_stop(int nid)
{
struct task_struct *kswapd = NODE_DATA(nid)->kswapd;
- if (kswapd)
+ if (kswapd) {
kthread_stop(kswapd);
+ NODE_DATA(nid)->kswapd = NULL;
+ }
}
static int __init kswapd_init(void)
break;
case NETDEV_DOWN:
+ if (dev->features & NETIF_F_HW_VLAN_FILTER)
+ vlan_vid_del(dev, 0);
+
/* Put all VLANs for this dev in the down state too. */
for (i = 0; i < VLAN_N_VID; i++) {
vlandev = vlan_group_get_device(grp, i);
const char *sptr = va_arg(ap, const char *);
uint16_t len = 0;
if (sptr)
- len = min_t(uint16_t, strlen(sptr),
+ len = min_t(size_t, strlen(sptr),
USHRT_MAX);
errcode = p9pdu_writef(pdu, proto_version,
s = rest_of_page(data);
if (s > count)
s = count;
+ BUG_ON(index > limit);
sg_set_buf(&sg[index++], data, s);
count -= s;
data += s;
- BUG_ON(index > limit);
}
return index-start;
if (addr->sat_addr.s_node == ATADDR_BCAST &&
!sock_flag(sk, SOCK_BROADCAST)) {
#if 1
- printk(KERN_WARNING "%s is broken and did not set "
- "SO_BROADCAST. It will break when 2.2 is "
- "released.\n",
+ pr_warn("atalk_connect: %s is broken and did not set SO_BROADCAST.\n",
current->comm);
#else
return -EACCES;
case AX25_P_NETROM:
if (ax25_protocol_is_registered(AX25_P_NETROM))
return -ESOCKTNOSUPPORT;
+ break;
#endif
#ifdef CONFIG_ROSE_MODULE
case AX25_P_ROSE:
* @bat_priv: the bat priv with all the soft interface information
* @skb: the frame to be checked
* @vid: the VLAN ID of the frame
+ * @is_bcast: the packet came in a broadcast packet type.
*
* bla_rx avoidance checks if:
* * we have to race for a claim
* process the skb.
*
*/
-int bla_rx(struct bat_priv *bat_priv, struct sk_buff *skb, short vid)
+int bla_rx(struct bat_priv *bat_priv, struct sk_buff *skb, short vid,
+ bool is_bcast)
{
struct ethhdr *ethhdr;
struct claim search_claim, *claim = NULL;
if (unlikely(atomic_read(&bat_priv->bla_num_requests)))
/* don't allow broadcasts while requests are in flight */
- if (is_multicast_ether_addr(ethhdr->h_dest))
+ if (is_multicast_ether_addr(ethhdr->h_dest) && is_bcast)
goto handled;
memcpy(search_claim.addr, ethhdr->h_source, ETH_ALEN);
}
/* if it is a broadcast ... */
- if (is_multicast_ether_addr(ethhdr->h_dest)) {
- /* ... drop it. the responsible gateway is in charge. */
+ if (is_multicast_ether_addr(ethhdr->h_dest) && is_bcast) {
+ /* ... drop it. the responsible gateway is in charge.
+ *
+ * We need to check is_bcast because with the gateway
+ * feature, broadcasts (like DHCP requests) may be sent
+ * using a unicast packet type.
+ */
goto handled;
} else {
/* seems the client considers us as its best gateway.
#define _NET_BATMAN_ADV_BLA_H_
#ifdef CONFIG_BATMAN_ADV_BLA
-int bla_rx(struct bat_priv *bat_priv, struct sk_buff *skb, short vid);
+int bla_rx(struct bat_priv *bat_priv, struct sk_buff *skb, short vid,
+ bool is_bcast);
int bla_tx(struct bat_priv *bat_priv, struct sk_buff *skb, short vid);
int bla_is_backbone_gw(struct sk_buff *skb,
struct orig_node *orig_node, int hdr_size);
#else /* ifdef CONFIG_BATMAN_ADV_BLA */
static inline int bla_rx(struct bat_priv *bat_priv, struct sk_buff *skb,
- short vid)
+ short vid, bool is_bcast)
{
return 0;
}
* changes */
if (skb_linearize(skb) < 0)
goto out;
+ /* skb_linearize() possibly changed skb->data */
+ tt_query = (struct tt_query_packet *)skb->data;
tt_len = tt_query->tt_data * sizeof(struct tt_change);
struct bat_priv *bat_priv = netdev_priv(soft_iface);
struct ethhdr *ethhdr;
struct vlan_ethhdr *vhdr;
+ struct batman_header *batadv_header = (struct batman_header *)skb->data;
short vid __maybe_unused = -1;
+ bool is_bcast;
+
+ is_bcast = (batadv_header->packet_type == BAT_BCAST);
/* check if enough space is available for pulling, and pull */
if (!pskb_may_pull(skb, hdr_size))
/* Let the bridge loop avoidance check the packet. If will
* not handle it, we can safely push it up.
*/
- if (bla_rx(bat_priv, skb, vid))
+ if (bla_rx(bat_priv, skb, vid, is_bcast))
goto out;
netif_rx(skb);
struct tt_orig_list_entry *orig_entry;
orig_entry = container_of(rcu, struct tt_orig_list_entry, rcu);
- atomic_dec(&orig_entry->orig_node->tt_size);
orig_node_free_ref(orig_entry->orig_node);
kfree(orig_entry);
}
static void tt_orig_list_entry_free_ref(struct tt_orig_list_entry *orig_entry)
{
+ /* to avoid race conditions, immediately decrease the tt counter */
+ atomic_dec(&orig_entry->orig_node->tt_size);
call_rcu(&orig_entry->rcu, tt_orig_list_entry_free_rcu);
}
}
spin_unlock_bh(list_lock);
}
- atomic_set(&orig_node->tt_size, 0);
orig_node->tt_initialised = false;
}
{
struct tt_local_entry *tt_local_entry = NULL;
struct tt_global_entry *tt_global_entry = NULL;
- bool ret = true;
+ bool ret = false;
if (!atomic_read(&bat_priv->ap_isolation))
- return false;
+ goto out;
tt_local_entry = tt_local_hash_find(bat_priv, dst);
if (!tt_local_entry)
if (!tt_global_entry)
goto out;
- if (_is_ap_isolated(tt_local_entry, tt_global_entry))
+ if (!_is_ap_isolated(tt_local_entry, tt_global_entry))
goto out;
- ret = false;
+ ret = true;
out:
if (tt_global_entry)
}
if (sk->sk_state == BT_CONNECTED || !newsock ||
- test_bit(BT_DEFER_SETUP, &bt_sk(parent)->flags)) {
+ test_bit(BT_SK_DEFER_SETUP, &bt_sk(parent)->flags)) {
bt_accept_unlink(sk);
if (newsock)
sock_graft(sk, newsock);
hci_dev_unlock(hdev);
}
+static void hci_key_refresh_complete_evt(struct hci_dev *hdev,
+ struct sk_buff *skb)
+{
+ struct hci_ev_key_refresh_complete *ev = (void *) skb->data;
+ struct hci_conn *conn;
+
+ BT_DBG("%s status %u handle %u", hdev->name, ev->status,
+ __le16_to_cpu(ev->handle));
+
+ hci_dev_lock(hdev);
+
+ conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle));
+ if (!conn)
+ goto unlock;
+
+ if (!ev->status)
+ conn->sec_level = conn->pending_sec_level;
+
+ clear_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags);
+
+ if (ev->status && conn->state == BT_CONNECTED) {
+ hci_acl_disconn(conn, HCI_ERROR_AUTH_FAILURE);
+ hci_conn_put(conn);
+ goto unlock;
+ }
+
+ if (conn->state == BT_CONFIG) {
+ if (!ev->status)
+ conn->state = BT_CONNECTED;
+
+ hci_proto_connect_cfm(conn, ev->status);
+ hci_conn_put(conn);
+ } else {
+ hci_auth_cfm(conn, ev->status);
+
+ hci_conn_hold(conn);
+ conn->disc_timeout = HCI_DISCONN_TIMEOUT;
+ hci_conn_put(conn);
+ }
+
+unlock:
+ hci_dev_unlock(hdev);
+}
+
static inline u8 hci_get_auth_req(struct hci_conn *conn)
{
/* If remote requests dedicated bonding follow that lead */
hci_extended_inquiry_result_evt(hdev, skb);
break;
+ case HCI_EV_KEY_REFRESH_COMPLETE:
+ hci_key_refresh_complete_evt(hdev, skb);
+ break;
+
case HCI_EV_IO_CAPA_REQUEST:
hci_io_capa_request_evt(hdev, skb);
break;
config BT_HIDP
tristate "HIDP protocol support"
- depends on BT && INPUT && HID_SUPPORT
+ depends on BT && INPUT
select HID
help
HIDP (Human Interface Device Protocol) is a transport layer
struct l2cap_conn *conn = container_of(work, struct l2cap_conn,
security_timer.work);
- l2cap_conn_del(conn->hcon, ETIMEDOUT);
+ BT_DBG("conn %p", conn);
+
+ if (test_and_clear_bit(HCI_CONN_LE_SMP_PEND, &conn->hcon->flags)) {
+ smp_chan_destroy(conn);
+ l2cap_conn_del(conn->hcon, ETIMEDOUT);
+ }
}
static struct l2cap_conn *l2cap_conn_add(struct hci_conn *hcon, u8 status)
while (len >= L2CAP_CONF_OPT_SIZE) {
len -= l2cap_get_conf_opt(&rsp, &type, &olen, &val);
- switch (type) {
- case L2CAP_CONF_RFC:
- if (olen == sizeof(rfc))
- memcpy(&rfc, (void *)val, olen);
- goto done;
- }
+ if (type != L2CAP_CONF_RFC)
+ continue;
+
+ if (olen != sizeof(rfc))
+ break;
+
+ memcpy(&rfc, (void *)val, olen);
+ goto done;
}
/* Use sane default values in case a misbehaving remote device
else
conn = hci_conn_hash_lookup_ba(hdev, LE_LINK, &cp->addr.bdaddr);
- if (!conn) {
+ if (!conn || conn->state == BT_OPEN || conn->state == BT_CLOSED) {
err = cmd_status(sk, hdev->id, MGMT_OP_DISCONNECT,
MGMT_STATUS_NOT_CONNECTED);
goto failed;
pairing_complete(cmd, mgmt_status(status));
}
+static void le_connect_complete_cb(struct hci_conn *conn, u8 status)
+{
+ struct pending_cmd *cmd;
+
+ BT_DBG("status %u", status);
+
+ if (!status)
+ return;
+
+ cmd = find_pairing(conn);
+ if (!cmd)
+ BT_DBG("Unable to find a pending command");
+ else
+ pairing_complete(cmd, mgmt_status(status));
+}
+
static int pair_device(struct sock *sk, struct hci_dev *hdev, void *data,
u16 len)
{
/* For LE, just connecting isn't a proof that the pairing finished */
if (cp->addr.type == BDADDR_BREDR)
conn->connect_cfm_cb = pairing_complete_cb;
+ else
+ conn->connect_cfm_cb = le_connect_complete_cb;
conn->security_cfm_cb = pairing_complete_cb;
conn->disconn_cfm_cb = pairing_complete_cb;
auth |= (req->auth_req | rsp->auth_req) & SMP_AUTH_MITM;
- ret = tk_request(conn, 0, auth, rsp->io_capability, req->io_capability);
+ ret = tk_request(conn, 0, auth, req->io_capability, rsp->io_capability);
if (ret)
return SMP_UNSPECIFIED;
return 0;
}
-static u8 smp_ltk_encrypt(struct l2cap_conn *conn)
+static u8 smp_ltk_encrypt(struct l2cap_conn *conn, u8 sec_level)
{
struct smp_ltk *key;
struct hci_conn *hcon = conn->hcon;
if (!key)
return 0;
+ if (sec_level > BT_SECURITY_MEDIUM && !key->authenticated)
+ return 0;
+
if (test_and_set_bit(HCI_CONN_ENCRYPT_PEND, &hcon->flags))
return 1;
hcon->pending_sec_level = authreq_to_seclevel(rp->auth_req);
- if (smp_ltk_encrypt(conn))
+ if (smp_ltk_encrypt(conn, hcon->pending_sec_level))
return 0;
if (test_and_set_bit(HCI_CONN_LE_SMP_PEND, &hcon->flags))
return 1;
if (hcon->link_mode & HCI_LM_MASTER)
- if (smp_ltk_encrypt(conn))
+ if (smp_ltk_encrypt(conn, sec_level))
goto done;
if (test_and_set_bit(HCI_CONN_LE_SMP_PEND, &hcon->flags))
return -ENOMEM;
dev_net_set(dev, net);
+ dev->rtnl_link_ops = &br_link_ops;
res = register_netdev(dev);
if (res)
return 0;
}
-static struct rtnl_link_ops br_link_ops __read_mostly = {
+struct rtnl_link_ops br_link_ops __read_mostly = {
.kind = "bridge",
.priv_size = sizeof(struct net_bridge),
.setup = br_dev_setup,
#endif
/* br_netlink.c */
+extern struct rtnl_link_ops br_link_ops;
extern int br_netlink_init(void);
extern void br_netlink_fini(void);
extern void br_ifinfo_notify(int event, struct net_bridge_port *port);
* Author: Sjur Brendeland/sjur.brandeland@stericsson.com
* License terms: GNU General Public License (GPL) version 2
*
- * Borrowed heavily from file: pn_dev.c. Thanks to
- * Remi Denis-Courmont <remi.denis-courmont@nokia.com>
+ * Borrowed heavily from file: pn_dev.c. Thanks to Remi Denis-Courmont
* and Sakari Ailus <sakari.ailus@nokia.com>
*/
static void __exit caif_device_exit(void)
{
- unregister_pernet_subsys(&caif_net_ops);
unregister_netdevice_notifier(&caif_device_notifier);
dev_remove_pack(&caif_packet_type);
+ unregister_pernet_subsys(&caif_net_ops);
}
module_init(caif_device_init);
cfsk_hold, cfsk_put);
cf_sk->sk.sk_state = CAIF_CONNECTED;
set_tx_flow_on(cf_sk);
+ cf_sk->sk.sk_shutdown = 0;
cf_sk->sk.sk_state_change(&cf_sk->sk);
break;
if (err < 0)
goto free_skb;
- /* to be able to check the received tx sock reference in raw_rcv() */
- skb_shinfo(skb)->tx_flags |= SKBTX_DRV_NEEDS_SK_REF;
-
skb->dev = dev;
skb->sk = sk;
/* unmount */
ceph_osdc_stop(&client->osdc);
- /*
- * make sure osd connections close out before destroying the
- * auth module, which is needed to free those connections'
- * ceph_authorizers.
- */
- ceph_msgr_flush();
-
ceph_monc_stop(&client->monc);
ceph_debugfs_client_cleanup(client);
m->hdr.seq = cpu_to_le64(++con->out_seq);
m->needs_out_seq = false;
}
+#ifdef CONFIG_BLOCK
+ else
+ m->bio_iter = NULL;
+#endif
dout("prepare_write_message %p seq %lld type %d len %d+%d+%d %d pgs\n",
m, con->out_seq, le16_to_cpu(m->hdr.type),
* dropped messages.
*/
dout("process_connect got RESET peer seq %u\n",
- le32_to_cpu(con->in_connect.connect_seq));
+ le32_to_cpu(con->in_reply.connect_seq));
pr_err("%s%lld %s connection reset\n",
ENTITY_NAME(con->peer_name),
ceph_pr_addr(&con->peer_addr.in_addr));
* If we sent a smaller connect_seq than the peer has, try
* again with a larger value.
*/
- dout("process_connect got RETRY my seq = %u, peer_seq = %u\n",
+ dout("process_connect got RETRY_SESSION my seq %u, peer %u\n",
le32_to_cpu(con->out_connect.connect_seq),
- le32_to_cpu(con->in_connect.connect_seq));
- con->connect_seq = le32_to_cpu(con->in_connect.connect_seq);
+ le32_to_cpu(con->in_reply.connect_seq));
+ con->connect_seq = le32_to_cpu(con->in_reply.connect_seq);
ceph_con_out_kvec_reset(con);
ret = prepare_write_connect(con);
if (ret < 0)
*/
dout("process_connect got RETRY_GLOBAL my %u peer_gseq %u\n",
con->peer_global_seq,
- le32_to_cpu(con->in_connect.global_seq));
+ le32_to_cpu(con->in_reply.global_seq));
get_global_seq(con->msgr,
- le32_to_cpu(con->in_connect.global_seq));
+ le32_to_cpu(con->in_reply.global_seq));
ceph_con_out_kvec_reset(con);
ret = prepare_write_connect(con);
if (ret < 0)
mutex_unlock(&monc->mutex);
+ /*
+ * flush msgr queue before we destroy ourselves to ensure that:
+ * - any work that references our embedded con is finished.
+ * - any osd_client or other work that may reference an authorizer
+ * finishes before we shut down the auth subsystem.
+ */
+ ceph_msgr_flush();
+
ceph_auth_destroy(monc->auth);
ceph_msg_put(monc->m_auth);
if (req->r_request)
ceph_msg_put(req->r_request);
- if (req->r_reply)
- ceph_msg_put(req->r_reply);
if (req->r_con_filling_msg) {
dout("release_request revoking pages %p from con %p\n",
req->r_pages, req->r_con_filling_msg);
ceph_con_revoke_message(req->r_con_filling_msg,
req->r_reply);
- ceph_con_put(req->r_con_filling_msg);
+ req->r_con_filling_msg->ops->put(req->r_con_filling_msg);
}
+ if (req->r_reply)
+ ceph_msg_put(req->r_reply);
if (req->r_own_pages)
ceph_release_page_vector(req->r_pages,
req->r_num_pages);
if (req->r_con_filling_msg == con && req->r_reply == msg) {
dout(" dropping con_filling_msg ref %p\n", con);
req->r_con_filling_msg = NULL;
- ceph_con_put(con);
+ con->ops->put(con);
}
if (!req->r_got_reply) {
dout("get_reply revoking msg %p from old con %p\n",
req->r_reply, req->r_con_filling_msg);
ceph_con_revoke_message(req->r_con_filling_msg, req->r_reply);
- ceph_con_put(req->r_con_filling_msg);
+ req->r_con_filling_msg->ops->put(req->r_con_filling_msg);
req->r_con_filling_msg = NULL;
}
#endif
}
*skip = 0;
- req->r_con_filling_msg = ceph_con_get(con);
+ req->r_con_filling_msg = con->ops->get(con);
dout("get_reply tid %lld %p\n", tid, m);
out:
no_module = request_module("netdev-%s", name);
if (no_module && capable(CAP_SYS_MODULE)) {
if (!request_module("%s", name))
- pr_err("Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev-%s instead.\n",
- name);
+ pr_warn("Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev-%s instead.\n",
+ name);
}
}
EXPORT_SYMBOL(dev_load);
return 0;
}
-/*
- * Try to orphan skb early, right before transmission by the device.
- * We cannot orphan skb if tx timestamp is requested or the sk-reference
- * is needed on driver level for other reasons, e.g. see net/can/raw.c
- */
-static inline void skb_orphan_try(struct sk_buff *skb)
-{
- struct sock *sk = skb->sk;
-
- if (sk && !skb_shinfo(skb)->tx_flags) {
- /* skb_tx_hash() wont be able to get sk.
- * We copy sk_hash into skb->rxhash
- */
- if (!skb->rxhash)
- skb->rxhash = sk->sk_hash;
- skb_orphan(skb);
- }
-}
-
static bool can_checksum_protocol(netdev_features_t features, __be16 protocol)
{
return ((features & NETIF_F_GEN_CSUM) ||
if (!list_empty(&ptype_all))
dev_queue_xmit_nit(skb, dev);
- skb_orphan_try(skb);
-
features = netif_skb_features(skb);
if (vlan_tx_tag_present(skb) &&
if (skb->sk && skb->sk->sk_hash)
hash = skb->sk->sk_hash;
else
- hash = (__force u16) skb->protocol ^ skb->rxhash;
+ hash = (__force u16) skb->protocol;
hash = jhash_1word(hash, hashrnd);
return (u16) (((u64) hash * qcount) >> 32) + qoffset;
{
struct netprio_map *map = rcu_dereference_bh(skb->dev->priomap);
- if ((!skb->priority) && (skb->sk) && map)
- skb->priority = map->priomap[skb->sk->sk_cgrp_prioidx];
+ if (!skb->priority && skb->sk && map) {
+ unsigned int prioidx = skb->sk->sk_cgrp_prioidx;
+
+ if (prioidx < map->priomap_len)
+ skb->priority = map->priomap[prioidx];
+ }
}
#else
#define skb_update_prio(skb)
/* Initialize per network namespace state */
static int __net_init netdev_init(struct net *net)
{
- INIT_LIST_HEAD(&net->dev_base_head);
+ if (net != &init_net)
+ INIT_LIST_HEAD(&net->dev_base_head);
net->dev_name_head = netdev_create_hash();
if (net->dev_name_head == NULL)
#define TRACE_ON 1
#define TRACE_OFF 0
-static void send_dm_alert(struct work_struct *unused);
-
-
/*
* Globals, our netlink socket pointer
* and the work handle that will send up
static DEFINE_MUTEX(trace_state_mutex);
struct per_cpu_dm_data {
- struct work_struct dm_alert_work;
- struct sk_buff __rcu *skb;
- atomic_t dm_hit_count;
- struct timer_list send_timer;
- int cpu;
+ spinlock_t lock;
+ struct sk_buff *skb;
+ struct work_struct dm_alert_work;
+ struct timer_list send_timer;
};
struct dm_hw_stat_delta {
static unsigned long dm_hw_check_delta = 2*HZ;
static LIST_HEAD(hw_stats_list);
-static void reset_per_cpu_data(struct per_cpu_dm_data *data)
+static struct sk_buff *reset_per_cpu_data(struct per_cpu_dm_data *data)
{
size_t al;
struct net_dm_alert_msg *msg;
struct nlattr *nla;
struct sk_buff *skb;
- struct sk_buff *oskb = rcu_dereference_protected(data->skb, 1);
+ unsigned long flags;
al = sizeof(struct net_dm_alert_msg);
al += dm_hit_limit * sizeof(struct net_dm_drop_point);
sizeof(struct net_dm_alert_msg));
msg = nla_data(nla);
memset(msg, 0, al);
- } else
- schedule_work_on(data->cpu, &data->dm_alert_work);
-
- /*
- * Don't need to lock this, since we are guaranteed to only
- * run this on a single cpu at a time.
- * Note also that we only update data->skb if the old and new skb
- * pointers don't match. This ensures that we don't continually call
- * synchornize_rcu if we repeatedly fail to alloc a new netlink message.
- */
- if (skb != oskb) {
- rcu_assign_pointer(data->skb, skb);
-
- synchronize_rcu();
-
- atomic_set(&data->dm_hit_count, dm_hit_limit);
+ } else {
+ mod_timer(&data->send_timer, jiffies + HZ / 10);
}
+ spin_lock_irqsave(&data->lock, flags);
+ swap(data->skb, skb);
+ spin_unlock_irqrestore(&data->lock, flags);
+
+ return skb;
}
-static void send_dm_alert(struct work_struct *unused)
+static void send_dm_alert(struct work_struct *work)
{
struct sk_buff *skb;
- struct per_cpu_dm_data *data = &get_cpu_var(dm_cpu_data);
+ struct per_cpu_dm_data *data;
- WARN_ON_ONCE(data->cpu != smp_processor_id());
+ data = container_of(work, struct per_cpu_dm_data, dm_alert_work);
- /*
- * Grab the skb we're about to send
- */
- skb = rcu_dereference_protected(data->skb, 1);
-
- /*
- * Replace it with a new one
- */
- reset_per_cpu_data(data);
+ skb = reset_per_cpu_data(data);
- /*
- * Ship it!
- */
if (skb)
genlmsg_multicast(skb, 0, NET_DM_GRP_ALERT, GFP_KERNEL);
-
- put_cpu_var(dm_cpu_data);
}
/*
* This is the timer function to delay the sending of an alert
* in the event that more drops will arrive during the
- * hysteresis period. Note that it operates under the timer interrupt
- * so we don't need to disable preemption here
+ * hysteresis period.
*/
-static void sched_send_work(unsigned long unused)
+static void sched_send_work(unsigned long _data)
{
- struct per_cpu_dm_data *data = &get_cpu_var(dm_cpu_data);
-
- schedule_work_on(smp_processor_id(), &data->dm_alert_work);
+ struct per_cpu_dm_data *data = (struct per_cpu_dm_data *)_data;
- put_cpu_var(dm_cpu_data);
+ schedule_work(&data->dm_alert_work);
}
static void trace_drop_common(struct sk_buff *skb, void *location)
struct nlattr *nla;
int i;
struct sk_buff *dskb;
- struct per_cpu_dm_data *data = &get_cpu_var(dm_cpu_data);
-
+ struct per_cpu_dm_data *data;
+ unsigned long flags;
- rcu_read_lock();
- dskb = rcu_dereference(data->skb);
+ local_irq_save(flags);
+ data = &__get_cpu_var(dm_cpu_data);
+ spin_lock(&data->lock);
+ dskb = data->skb;
if (!dskb)
goto out;
- if (!atomic_add_unless(&data->dm_hit_count, -1, 0)) {
- /*
- * we're already at zero, discard this hit
- */
- goto out;
- }
-
nlh = (struct nlmsghdr *)dskb->data;
nla = genlmsg_data(nlmsg_data(nlh));
msg = nla_data(nla);
for (i = 0; i < msg->entries; i++) {
if (!memcmp(&location, msg->points[i].pc, sizeof(void *))) {
msg->points[i].count++;
- atomic_inc(&data->dm_hit_count);
goto out;
}
}
-
+ if (msg->entries == dm_hit_limit)
+ goto out;
/*
* We need to create a new entry
*/
if (!timer_pending(&data->send_timer)) {
data->send_timer.expires = jiffies + dm_delay * HZ;
- add_timer_on(&data->send_timer, smp_processor_id());
+ add_timer(&data->send_timer);
}
out:
- rcu_read_unlock();
- put_cpu_var(dm_cpu_data);
- return;
+ spin_unlock_irqrestore(&data->lock, flags);
}
static void trace_kfree_skb_hit(void *ignore, struct sk_buff *skb, void *location)
for_each_possible_cpu(cpu) {
data = &per_cpu(dm_cpu_data, cpu);
- data->cpu = cpu;
INIT_WORK(&data->dm_alert_work, send_dm_alert);
init_timer(&data->send_timer);
- data->send_timer.data = cpu;
+ data->send_timer.data = (unsigned long)data;
data->send_timer.function = sched_send_work;
+ spin_lock_init(&data->lock);
reset_per_cpu_data(data);
}
/**
* sk_unattached_filter_create - create an unattached filter
* @fprog: the filter program
- * @sk: the socket to use
+ * @pfp: the unattached filter that is created
*
- * Create a filter independent ofr any socket. We first run some
+ * Create a filter independent of any socket. We first run some
* sanity checks on it to make sure it does not explode on us later.
* If an error occurs or there is insufficient memory for the filter
* a negative errno code is returned. On success the return is zero.
rcu_read_lock_bh();
nht = rcu_dereference_bh(tbl->nht);
- for (h = 0; h < (1 << nht->hash_shift); h++) {
- if (h < s_h)
- continue;
+ for (h = s_h; h < (1 << nht->hash_shift); h++) {
if (h > s_h)
s_idx = 0;
for (n = rcu_dereference_bh(nht->hash_buckets[h]), idx = 0;
read_lock_bh(&tbl->lock);
- for (h = 0; h <= PNEIGH_HASHMASK; h++) {
- if (h < s_h)
- continue;
+ for (h = s_h; h <= PNEIGH_HASHMASK; h++) {
if (h > s_h)
s_idx = 0;
for (n = tbl->phash_buckets[h], idx = 0; n; n = n->next) {
struct neigh_table *tbl;
int t, family, s_t;
int proxy = 0;
- int err = 0;
+ int err;
read_lock(&neigh_tbl_lock);
family = ((struct rtgenmsg *) nlmsg_data(cb->nlh))->rtgen_family;
s_t = cb->args[0];
- for (tbl = neigh_tables, t = 0; tbl && (err >= 0);
+ for (tbl = neigh_tables, t = 0; tbl;
tbl = tbl->next, t++) {
if (t < s_t || (family && tbl->family != family))
continue;
err = pneigh_dump_table(tbl, skb, cb);
else
err = neigh_dump_table(tbl, skb, cb);
+ if (err < 0)
+ break;
}
read_unlock(&neigh_tbl_lock);
LIST_HEAD(net_namespace_list);
EXPORT_SYMBOL_GPL(net_namespace_list);
-struct net init_net;
+struct net init_net = {
+ .dev_base_head = LIST_HEAD_INIT(init_net.dev_base_head),
+};
EXPORT_SYMBOL(init_net);
#define INITIAL_NET_GEN_PTRS 13 /* +1 for len +2 for rcu_head */
void netpoll_send_udp(struct netpoll *np, const char *msg, int len)
{
- int total_len, eth_len, ip_len, udp_len;
+ int total_len, ip_len, udp_len;
struct sk_buff *skb;
struct udphdr *udph;
struct iphdr *iph;
struct ethhdr *eth;
udp_len = len + sizeof(*udph);
- ip_len = eth_len = udp_len + sizeof(*iph);
- total_len = eth_len + ETH_HLEN + NET_IP_ALIGN;
+ ip_len = udp_len + sizeof(*iph);
+ total_len = ip_len + LL_RESERVED_SPACE(np->dev);
- skb = find_skb(np, total_len, total_len - len);
+ skb = find_skb(np, total_len + np->dev->needed_tailroom,
+ total_len - len);
if (!skb)
return;
skb_copy_to_linear_data(skb, msg, len);
- skb->len += len;
+ skb_put(skb, len);
skb_push(skb, sizeof(*udph));
skb_reset_transport_header(skb);
return -ENOSPC;
}
set_bit(prioidx, prioidx_map);
+ if (atomic_read(&max_prioidx) < prioidx)
+ atomic_set(&max_prioidx, prioidx);
spin_unlock_irqrestore(&prioidx_map_lock, flags);
- atomic_set(&max_prioidx, prioidx);
*prio = prioidx;
return 0;
}
spin_unlock_irqrestore(&prioidx_map_lock, flags);
}
-static void extend_netdev_table(struct net_device *dev, u32 new_len)
+static int extend_netdev_table(struct net_device *dev, u32 new_len)
{
size_t new_size = sizeof(struct netprio_map) +
((sizeof(u32) * new_len));
if (!new_priomap) {
pr_warn("Unable to alloc new priomap!\n");
- return;
+ return -ENOMEM;
}
for (i = 0;
rcu_assign_pointer(dev->priomap, new_priomap);
if (old_priomap)
kfree_rcu(old_priomap, rcu);
+ return 0;
}
-static void update_netdev_tables(void)
+static int write_update_netdev_table(struct net_device *dev)
{
+ int ret = 0;
+ u32 max_len;
+ struct netprio_map *map;
+
+ rtnl_lock();
+ max_len = atomic_read(&max_prioidx) + 1;
+ map = rtnl_dereference(dev->priomap);
+ if (!map || map->priomap_len < max_len)
+ ret = extend_netdev_table(dev, max_len);
+ rtnl_unlock();
+
+ return ret;
+}
+
+static int update_netdev_tables(void)
+{
+ int ret = 0;
struct net_device *dev;
- u32 max_len = atomic_read(&max_prioidx) + 1;
+ u32 max_len;
struct netprio_map *map;
rtnl_lock();
+ max_len = atomic_read(&max_prioidx) + 1;
for_each_netdev(&init_net, dev) {
map = rtnl_dereference(dev->priomap);
- if ((!map) ||
- (map->priomap_len < max_len))
- extend_netdev_table(dev, max_len);
+ /*
+ * don't allocate priomap if we didn't
+ * change net_prio.ifpriomap (map == NULL),
+ * this will speed up skb_update_prio.
+ */
+ if (map && map->priomap_len < max_len) {
+ ret = extend_netdev_table(dev, max_len);
+ if (ret < 0)
+ break;
+ }
}
rtnl_unlock();
+ return ret;
}
static struct cgroup_subsys_state *cgrp_create(struct cgroup *cgrp)
{
struct cgroup_netprio_state *cs;
- int ret;
+ int ret = -EINVAL;
cs = kzalloc(sizeof(*cs), GFP_KERNEL);
if (!cs)
return ERR_PTR(-ENOMEM);
- if (cgrp->parent && cgrp_netprio_state(cgrp->parent)->prioidx) {
- kfree(cs);
- return ERR_PTR(-EINVAL);
- }
+ if (cgrp->parent && cgrp_netprio_state(cgrp->parent)->prioidx)
+ goto out;
ret = get_prioidx(&cs->prioidx);
- if (ret != 0) {
+ if (ret < 0) {
pr_warn("No space in priority index array\n");
- kfree(cs);
- return ERR_PTR(ret);
+ goto out;
+ }
+
+ ret = update_netdev_tables();
+ if (ret < 0) {
+ put_prioidx(cs->prioidx);
+ goto out;
}
return &cs->css;
+out:
+ kfree(cs);
+ return ERR_PTR(ret);
}
static void cgrp_destroy(struct cgroup *cgrp)
rtnl_lock();
for_each_netdev(&init_net, dev) {
map = rtnl_dereference(dev->priomap);
- if (map)
+ if (map && cs->prioidx < map->priomap_len)
map->priomap[cs->prioidx] = 0;
}
rtnl_unlock();
rcu_read_lock();
for_each_netdev_rcu(&init_net, dev) {
map = rcu_dereference(dev->priomap);
- priority = map ? map->priomap[prioidx] : 0;
+ priority = (map && prioidx < map->priomap_len) ? map->priomap[prioidx] : 0;
cb->fill(cb, dev->name, priority);
}
rcu_read_unlock();
if (!dev)
goto out_free_devname;
- update_netdev_tables();
- ret = 0;
+ ret = write_update_netdev_table(dev);
+ if (ret < 0)
+ goto out_put_dev;
+
rcu_read_lock();
map = rcu_dereference(dev->priomap);
if (map)
map->priomap[prioidx] = priority;
rcu_read_unlock();
+
+out_put_dev:
dev_put(dev);
out_free_devname:
unsigned int fragsz = SKB_DATA_ALIGN(length + NET_SKB_PAD) +
SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
- if (fragsz <= PAGE_SIZE && !(gfp_mask & __GFP_WAIT)) {
+ if (fragsz <= PAGE_SIZE && !(gfp_mask & (__GFP_WAIT | GFP_DMA))) {
void *data = netdev_alloc_frag(fragsz);
if (likely(data)) {
struct splice_pipe_desc spd = {
.pages = pages,
.partial = partial,
+ .nr_pages_max = MAX_SKB_FRAGS,
.flags = flags,
.ops = &sock_pipe_buf_ops,
.spd_release = sock_spd_release,
* @to: prior buffer
* @from: buffer to add
* @fragstolen: pointer to boolean
- *
+ * @delta_truesize: how much more was allocated than was requested
*/
bool skb_try_coalesce(struct sk_buff *to, struct sk_buff *from,
bool *fragstolen, int *delta_truesize)
mtu = dev->mtu;
pr_debug("name = %s, mtu = %u\n", dev->name, mtu);
+ if (size > mtu) {
+ pr_debug("size = %Zu, mtu = %u\n", size, mtu);
+ err = -EINVAL;
+ goto out_dev;
+ }
+
hlen = LL_RESERVED_SPACE(dev);
tlen = dev->needed_tailroom;
skb = sock_alloc_send_skb(sk, hlen + tlen + size,
if (err < 0)
goto out_skb;
- if (size > mtu) {
- pr_debug("size = %Zu, mtu = %u\n", size, mtu);
- err = -EINVAL;
- goto out_skb;
- }
-
skb->dev = dev;
skb->sk = sk;
skb->protocol = htons(ETH_P_IEEE802154);
case CIPSO_V4_TAG_LOCAL:
/* This is a non-standard tag that we only allow for
* local connections, so if the incoming interface is
- * not the loopback device drop the packet. */
- if (!(skb->dev->flags & IFF_LOOPBACK)) {
+ * not the loopback device drop the packet. Further,
+ * there is no legitimate reason for setting this from
+ * userspace so reject it if skb is NULL. */
+ if (skb == NULL || !(skb->dev->flags & IFF_LOOPBACK)) {
err_offset = opt_iter;
goto validate_return_locked;
}
}
EXPORT_SYMBOL(inet_peer_xrlim_allow);
+static void inetpeer_inval_rcu(struct rcu_head *head)
+{
+ struct inet_peer *p = container_of(head, struct inet_peer, gc_rcu);
+
+ spin_lock_bh(&gc_lock);
+ list_add_tail(&p->gc_list, &gc_list);
+ spin_unlock_bh(&gc_lock);
+
+ schedule_delayed_work(&gc_work, gc_delay);
+}
+
void inetpeer_invalidate_tree(int family)
{
struct inet_peer *old, *new, *prev;
prev = cmpxchg(&base->root, old, new);
if (prev == old) {
base->total = 0;
- spin_lock(&gc_lock);
- list_add_tail(&prev->gc_list, &gc_list);
- spin_unlock(&gc_lock);
- schedule_delayed_work(&gc_work, gc_delay);
+ call_rcu(&prev->gc_rcu, inetpeer_inval_rcu);
}
out:
struct ip_options *opt = &(IPCB(skb)->opt);
IP_INC_STATS_BH(dev_net(skb_dst(skb)->dev), IPSTATS_MIB_OUTFORWDATAGRAMS);
+ IP_ADD_STATS_BH(dev_net(skb_dst(skb)->dev), IPSTATS_MIB_OUTOCTETS, skb->len);
if (unlikely(opt->optlen))
ip_forward_options(skb);
struct ip_options *opt = &(IPCB(skb)->opt);
IP_INC_STATS_BH(dev_net(skb_dst(skb)->dev), IPSTATS_MIB_OUTFORWDATAGRAMS);
+ IP_ADD_STATS_BH(dev_net(skb_dst(skb)->dev), IPSTATS_MIB_OUTOCTETS, skb->len);
if (unlikely(opt->optlen))
ip_forward_options(skb);
if (w->leaf && fn->fn_flags & RTN_RTINFO) {
int err;
- if (w->count < w->skip) {
- w->count++;
+ if (w->skip) {
+ w->skip--;
continue;
}
neigh_flags = neigh->flags;
neigh_release(neigh);
}
- if (neigh_flags & NTF_ROUTER) {
+ if (!(neigh_flags & NTF_ROUTER)) {
RT6_TRACE("purging route %p via non-router but gateway\n",
rt);
return -1;
hdr->hop_limit--;
IP6_INC_STATS_BH(net, ip6_dst_idev(dst), IPSTATS_MIB_OUTFORWDATAGRAMS);
+ IP6_ADD_STATS_BH(net, ip6_dst_idev(dst), IPSTATS_MIB_OUTOCTETS, skb->len);
return NF_HOOK(NFPROTO_IPV6, NF_INET_FORWARD, skb, skb->dev, dst->dev,
ip6_forward_finish);
{
IP6_INC_STATS_BH(dev_net(skb_dst(skb)->dev), ip6_dst_idev(skb_dst(skb)),
IPSTATS_MIB_OUTFORWDATAGRAMS);
+ IP6_ADD_STATS_BH(dev_net(skb_dst(skb)->dev), ip6_dst_idev(skb_dst(skb)),
+ IPSTATS_MIB_OUTOCTETS, skb->len);
return dst_output(skb);
}
net->ipv6.sysctl.ip6_rt_mtu_expires = 10*60*HZ;
net->ipv6.sysctl.ip6_rt_min_advmss = IPV6_MIN_MTU - 20 - 40;
-#ifdef CONFIG_PROC_FS
- proc_net_fops_create(net, "ipv6_route", 0, &ipv6_route_proc_fops);
- proc_net_fops_create(net, "rt6_stats", S_IRUGO, &rt6_stats_seq_fops);
-#endif
net->ipv6.ip6_rt_gc_expire = 30*HZ;
ret = 0;
static void __net_exit ip6_route_net_exit(struct net *net)
{
-#ifdef CONFIG_PROC_FS
- proc_net_remove(net, "ipv6_route");
- proc_net_remove(net, "rt6_stats");
-#endif
kfree(net->ipv6.ip6_null_entry);
#ifdef CONFIG_IPV6_MULTIPLE_TABLES
kfree(net->ipv6.ip6_prohibit_entry);
dst_entries_destroy(&net->ipv6.ip6_dst_ops);
}
+static int __net_init ip6_route_net_init_late(struct net *net)
+{
+#ifdef CONFIG_PROC_FS
+ proc_net_fops_create(net, "ipv6_route", 0, &ipv6_route_proc_fops);
+ proc_net_fops_create(net, "rt6_stats", S_IRUGO, &rt6_stats_seq_fops);
+#endif
+ return 0;
+}
+
+static void __net_exit ip6_route_net_exit_late(struct net *net)
+{
+#ifdef CONFIG_PROC_FS
+ proc_net_remove(net, "ipv6_route");
+ proc_net_remove(net, "rt6_stats");
+#endif
+}
+
static struct pernet_operations ip6_route_net_ops = {
.init = ip6_route_net_init,
.exit = ip6_route_net_exit,
};
+static struct pernet_operations ip6_route_net_late_ops = {
+ .init = ip6_route_net_init_late,
+ .exit = ip6_route_net_exit_late,
+};
+
static struct notifier_block ip6_route_dev_notifier = {
.notifier_call = ip6_route_dev_notify,
.priority = 0,
if (ret)
goto xfrm6_init;
+ ret = register_pernet_subsys(&ip6_route_net_late_ops);
+ if (ret)
+ goto fib6_rules_init;
+
ret = -ENOBUFS;
if (__rtnl_register(PF_INET6, RTM_NEWROUTE, inet6_rtm_newroute, NULL, NULL) ||
__rtnl_register(PF_INET6, RTM_DELROUTE, inet6_rtm_delroute, NULL, NULL) ||
__rtnl_register(PF_INET6, RTM_GETROUTE, inet6_rtm_getroute, NULL, NULL))
- goto fib6_rules_init;
+ goto out_register_late_subsys;
ret = register_netdevice_notifier(&ip6_route_dev_notifier);
if (ret)
- goto fib6_rules_init;
+ goto out_register_late_subsys;
out:
return ret;
+out_register_late_subsys:
+ unregister_pernet_subsys(&ip6_route_net_late_ops);
fib6_rules_init:
fib6_rules_cleanup();
xfrm6_init:
void ip6_route_cleanup(void)
{
unregister_netdevice_notifier(&ip6_route_dev_notifier);
+ unregister_pernet_subsys(&ip6_route_net_late_ops);
fib6_rules_cleanup();
xfrm6_fini();
fib6_gc_cleanup();
tcp_rsk(req)->snt_isn = isn;
tcp_rsk(req)->snt_synack = tcp_time_stamp;
- security_inet_conn_request(sk, skb, req);
+ if (security_inet_conn_request(sk, skb, req))
+ goto drop_and_release;
if (tcp_v6_send_synack(sk, req,
(struct request_values *)&tmp_ext,
skb_trim(skb, skb->dev->mtu);
}
skb->protocol = ETH_P_AF_IUCV;
- skb_shinfo(skb)->tx_flags |= SKBTX_DRV_NEEDS_SK_REF;
nskb = skb_clone(skb, GFP_ATOMIC);
if (!nskb)
return -ENOMEM;
struct sock *tunnel_sock;
struct l2tp_session *session;
struct list_head list;
+ atomic_long_t tx_bytes;
+ atomic_long_t tx_packets;
+ atomic_long_t rx_bytes;
+ atomic_long_t rx_packets;
+ atomic_long_t rx_errors;
};
/* via l2tp_session_priv() */
struct l2tp_eth *priv = netdev_priv(dev);
struct l2tp_session *session = priv->session;
+ atomic_long_add(skb->len, &priv->tx_bytes);
+ atomic_long_inc(&priv->tx_packets);
+
l2tp_xmit_skb(session, skb, session->hdr_len);
- dev->stats.tx_bytes += skb->len;
- dev->stats.tx_packets++;
+ return NETDEV_TX_OK;
+}
- return 0;
+static struct rtnl_link_stats64 *l2tp_eth_get_stats64(struct net_device *dev,
+ struct rtnl_link_stats64 *stats)
+{
+ struct l2tp_eth *priv = netdev_priv(dev);
+
+ stats->tx_bytes = atomic_long_read(&priv->tx_bytes);
+ stats->tx_packets = atomic_long_read(&priv->tx_packets);
+ stats->rx_bytes = atomic_long_read(&priv->rx_bytes);
+ stats->rx_packets = atomic_long_read(&priv->rx_packets);
+ stats->rx_errors = atomic_long_read(&priv->rx_errors);
+ return stats;
}
+
static struct net_device_ops l2tp_eth_netdev_ops = {
.ndo_init = l2tp_eth_dev_init,
.ndo_uninit = l2tp_eth_dev_uninit,
.ndo_start_xmit = l2tp_eth_dev_xmit,
+ .ndo_get_stats64 = l2tp_eth_get_stats64,
};
static void l2tp_eth_dev_setup(struct net_device *dev)
{
ether_setup(dev);
- dev->priv_flags &= ~IFF_TX_SKB_SHARING;
+ dev->priv_flags &= ~IFF_TX_SKB_SHARING;
+ dev->features |= NETIF_F_LLTX;
dev->netdev_ops = &l2tp_eth_netdev_ops;
dev->destructor = free_netdev;
}
{
struct l2tp_eth_sess *spriv = l2tp_session_priv(session);
struct net_device *dev = spriv->dev;
+ struct l2tp_eth *priv = netdev_priv(dev);
if (session->debug & L2TP_MSG_DATA) {
unsigned int length;
- u8 *ptr = skb->data;
length = min(32u, skb->len);
if (!pskb_may_pull(skb, length))
goto error;
pr_debug("%s: eth recv\n", session->name);
- print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, ptr, length);
+ print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, skb->data, length);
}
if (!pskb_may_pull(skb, sizeof(ETH_HLEN)))
nf_reset(skb);
if (dev_forward_skb(dev, skb) == NET_RX_SUCCESS) {
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += data_len;
- } else
- dev->stats.rx_errors++;
-
+ atomic_long_inc(&priv->rx_packets);
+ atomic_long_add(data_len, &priv->rx_bytes);
+ } else {
+ atomic_long_inc(&priv->rx_errors);
+ }
return;
error:
- dev->stats.rx_errors++;
+ atomic_long_inc(&priv->rx_errors);
kfree_skb(skb);
}
if (dev) {
unregister_netdev(dev);
spriv->dev = NULL;
+ module_put(THIS_MODULE);
}
}
}
if (rc < 0)
goto out_del_dev;
+ __module_get(THIS_MODULE);
/* Must be done after register_netdev() */
strlcpy(session->ifname, dev->name, IFNAMSIZ);
sk->sk_bound_dev_if);
if (IS_ERR(rt))
goto no_route;
- if (connected)
+ if (connected) {
sk_setup_caps(sk, &rt->dst);
- else
- dst_release(&rt->dst); /* safe since we hold rcu_read_lock */
+ } else {
+ skb_dst_set(skb, &rt->dst);
+ goto xmit;
+ }
}
/* We dont need to clone dst here, it is guaranteed to not disappear.
*/
skb_dst_set_noref(skb, &rt->dst);
+xmit:
/* Queue the packet to IP for output */
rc = ip_queue_xmit(skb, &inet->cork.fl);
rcu_read_unlock();
struct tid_ampdu_rx *tid_rx;
unsigned long timeout;
+ rcu_read_lock();
tid_rx = rcu_dereference(sta->ampdu_mlme.tid_rx[*ptid]);
- if (!tid_rx)
+ if (!tid_rx) {
+ rcu_read_unlock();
return;
+ }
timeout = tid_rx->last_rx + TU_TO_JIFFIES(tid_rx->timeout);
if (time_is_after_jiffies(timeout)) {
mod_timer(&tid_rx->session_timer, timeout);
+ rcu_read_unlock();
return;
}
+ rcu_read_unlock();
#ifdef CONFIG_MAC80211_HT_DEBUG
printk(KERN_DEBUG "rx session timer expired on tid %d\n", (u16)*ptid);
sinfo.filled = 0;
sta_set_sinfo(sta, &sinfo);
- if (sinfo.filled | STATION_INFO_TX_BITRATE)
+ if (sinfo.filled & STATION_INFO_TX_BITRATE)
data[i] = 100000 *
cfg80211_calculate_bitrate(&sinfo.txrate);
i++;
- if (sinfo.filled | STATION_INFO_RX_BITRATE)
+ if (sinfo.filled & STATION_INFO_RX_BITRATE)
data[i] = 100000 *
cfg80211_calculate_bitrate(&sinfo.rxrate);
i++;
- if (sinfo.filled | STATION_INFO_SIGNAL_AVG)
+ if (sinfo.filled & STATION_INFO_SIGNAL_AVG)
data[i] = (u8)sinfo.signal_avg;
i++;
} else {
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
int i, ret;
+ if (!ieee80211_sdata_running(sdata))
+ return -ENETDOWN;
+
if (local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL) {
ret = drv_set_bitrate_mask(local, sdata, mask);
if (ret)
ieee80211_configure_filter(local);
break;
default:
+ mutex_lock(&local->mtx);
+ if (local->hw_roc_dev == sdata->dev &&
+ local->hw_roc_channel) {
+ /* ignore return value since this is racy */
+ drv_cancel_remain_on_channel(local);
+ ieee80211_queue_work(&local->hw, &local->hw_roc_done);
+ }
+ mutex_unlock(&local->mtx);
+
+ flush_work(&local->hw_roc_start);
+ flush_work(&local->hw_roc_done);
+
flush_work(&sdata->work);
/*
* When we get here, the interface is marked down.
sdata->vif.bss_conf.qos = true;
}
+static void __ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata)
+{
+ lockdep_assert_held(&sdata->local->mtx);
+
+ sdata->u.mgd.flags &= ~(IEEE80211_STA_CONNECTION_POLL |
+ IEEE80211_STA_BEACON_POLL);
+ ieee80211_run_deferred_scan(sdata->local);
+}
+
+static void ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata)
+{
+ mutex_lock(&sdata->local->mtx);
+ __ieee80211_stop_poll(sdata);
+ mutex_unlock(&sdata->local->mtx);
+}
+
static u32 ieee80211_handle_bss_capability(struct ieee80211_sub_if_data *sdata,
u16 capab, bool erp_valid, u8 erp)
{
sdata->u.mgd.flags |= IEEE80211_STA_RESET_SIGNAL_AVE;
/* just to be sure */
- sdata->u.mgd.flags &= ~(IEEE80211_STA_CONNECTION_POLL |
- IEEE80211_STA_BEACON_POLL);
+ ieee80211_stop_poll(sdata);
ieee80211_led_assoc(local, 1);
struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
u32 changed = 0;
- u8 bssid[ETH_ALEN];
ASSERT_MGD_MTX(ifmgd);
if (WARN_ON(!ifmgd->associated))
return;
- memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
+ ieee80211_stop_poll(sdata);
ifmgd->associated = NULL;
- memset(ifmgd->bssid, 0, ETH_ALEN);
/*
* we need to commit the associated = NULL change because the
netif_carrier_off(sdata->dev);
mutex_lock(&local->sta_mtx);
- sta = sta_info_get(sdata, bssid);
+ sta = sta_info_get(sdata, ifmgd->bssid);
if (sta) {
set_sta_flag(sta, WLAN_STA_BLOCK_BA);
ieee80211_sta_tear_down_BA_sessions(sta, tx);
/* deauthenticate/disassociate now */
if (tx || frame_buf)
- ieee80211_send_deauth_disassoc(sdata, bssid, stype, reason,
- tx, frame_buf);
+ ieee80211_send_deauth_disassoc(sdata, ifmgd->bssid, stype,
+ reason, tx, frame_buf);
/* flush out frame */
if (tx)
drv_flush(local, false);
+ /* clear bssid only after building the needed mgmt frames */
+ memset(ifmgd->bssid, 0, ETH_ALEN);
+
/* remove AP and TDLS peers */
sta_info_flush(local, sdata);
return;
}
- ifmgd->flags &= ~(IEEE80211_STA_CONNECTION_POLL |
- IEEE80211_STA_BEACON_POLL);
+ __ieee80211_stop_poll(sdata);
mutex_lock(&local->iflist_mtx);
ieee80211_recalc_ps(local, -1);
round_jiffies_up(jiffies +
IEEE80211_CONNECTION_IDLE_TIME));
out:
- ieee80211_run_deferred_scan(local);
mutex_unlock(&local->mtx);
}
sdata->name, mgmt->sa, status_code);
ieee80211_destroy_assoc_data(sdata, false);
} else {
- printk(KERN_DEBUG "%s: associated\n", sdata->name);
-
if (!ieee80211_assoc_success(sdata, *bss, mgmt, len)) {
/* oops -- internal error -- send timeout for now */
- ieee80211_destroy_assoc_data(sdata, true);
- sta_info_destroy_addr(sdata, mgmt->bssid);
+ ieee80211_destroy_assoc_data(sdata, false);
cfg80211_put_bss(*bss);
return RX_MGMT_CFG80211_ASSOC_TIMEOUT;
}
+ printk(KERN_DEBUG "%s: associated\n", sdata->name);
/*
* destroy assoc_data afterwards, as otherwise an idle
net_dbg_ratelimited("%s: cancelling probereq poll due to a received beacon\n",
sdata->name);
#endif
+ mutex_lock(&local->mtx);
ifmgd->flags &= ~IEEE80211_STA_BEACON_POLL;
+ ieee80211_run_deferred_scan(local);
+ mutex_unlock(&local->mtx);
+
mutex_lock(&local->iflist_mtx);
ieee80211_recalc_ps(local, -1);
mutex_unlock(&local->iflist_mtx);
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
u8 frame_buf[DEAUTH_DISASSOC_LEN];
- ifmgd->flags &= ~(IEEE80211_STA_CONNECTION_POLL |
- IEEE80211_STA_BEACON_POLL);
-
ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, reason,
false, frame_buf);
mutex_unlock(&ifmgd->mtx);
u32 flags;
if (sdata->vif.type == NL80211_IFTYPE_STATION) {
- sdata->u.mgd.flags &= ~(IEEE80211_STA_BEACON_POLL |
- IEEE80211_STA_CONNECTION_POLL);
+ __ieee80211_stop_poll(sdata);
/* let's probe the connection once */
flags = sdata->local->hw.flags;
if (test_and_clear_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running))
add_timer(&ifmgd->chswitch_timer);
ieee80211_sta_reset_beacon_monitor(sdata);
+
+ mutex_lock(&sdata->local->mtx);
ieee80211_restart_sta_timer(sdata);
+ mutex_unlock(&sdata->local->mtx);
}
#endif
}
local->oper_channel = cbss->channel;
- ieee80211_hw_config(local, 0);
+ ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
if (!have_sta) {
u32 rates = 0, basic_rates = 0;
return;
}
+ /* was never transmitted */
+ if (local->hw_roc_skb) {
+ u64 cookie;
+
+ cookie = local->hw_roc_cookie ^ 2;
+
+ cfg80211_mgmt_tx_status(local->hw_roc_dev, cookie,
+ local->hw_roc_skb->data,
+ local->hw_roc_skb->len, false,
+ GFP_KERNEL);
+
+ kfree_skb(local->hw_roc_skb);
+ local->hw_roc_skb = NULL;
+ local->hw_roc_skb_for_status = NULL;
+ }
+
if (!local->hw_roc_for_tx)
cfg80211_remain_on_channel_expired(local->hw_roc_dev,
local->hw_roc_cookie,
max_rates = sband->n_bitrates;
}
- msp = kzalloc(sizeof(struct minstrel_ht_sta), gfp);
+ msp = kzalloc(sizeof(*msp), gfp);
if (!msp)
return NULL;
* frames that we didn't handle, including returning unknown
* ones. For all other modes we will return them to the sender,
* setting the 0x80 bit in the action category, as required by
- * 802.11-2007 7.3.1.11.
+ * 802.11-2012 9.24.4.
* Newer versions of hostapd shall also use the management frame
* registration mechanisms, but older ones still use cooked
* monitor interfaces so push all frames there.
sdata->vif.type == NL80211_IFTYPE_AP_VLAN))
return RX_DROP_MONITOR;
+ if (is_multicast_ether_addr(mgmt->da))
+ return RX_DROP_MONITOR;
+
/* do not return rejected action frames */
if (mgmt->u.action.category & 0x80)
return RX_DROP_UNUSABLE;
/* make the station visible */
sta_info_hash_add(local, sta);
- list_add(&sta->list, &local->sta_list);
+ list_add_rcu(&sta->list, &local->sta_list);
set_sta_flag(sta, WLAN_STA_INSERTED);
if (ret)
return ret;
- list_del(&sta->list);
+ list_del_rcu(&sta->list);
mutex_lock(&local->key_mtx);
for (i = 0; i < NUM_DEFAULT_KEYS; i++)
* @plink_timer: peer link watch timer
* @plink_timer_was_running: used by suspend/resume to restore timers
* @t_offset: timing offset relative to this host
+ * @t_offset_setpoint: reference timing offset of this sta to be used when
+ * calculating clockdrift
+ * @ch_type: peer's channel type
* @debugfs: debug filesystem info
* @dead: set to true when sta is unlinked
* @uploaded: set to true when sta is uploaded to the driver
* @sta: station information we share with the driver
* @sta_state: duplicates information about station state (for debug)
* @beacon_loss_count: number of times beacon loss has triggered
+ * @supports_40mhz: tracks whether the station advertised 40 MHz support
+ * as we overwrite its HT parameters with the currently used value
*/
struct sta_info {
/* General information, mostly static */
__le16 fc;
struct ieee80211_hdr hdr;
struct ieee80211s_hdr mesh_hdr __maybe_unused;
- struct mesh_path __maybe_unused *mppath = NULL;
+ struct mesh_path __maybe_unused *mppath = NULL, *mpath = NULL;
const u8 *encaps_data;
int encaps_len, skip_header_bytes;
int nh_pos, h_pos;
goto fail;
}
rcu_read_lock();
- if (!is_multicast_ether_addr(skb->data))
- mppath = mpp_path_lookup(skb->data, sdata);
+ if (!is_multicast_ether_addr(skb->data)) {
+ mpath = mesh_path_lookup(skb->data, sdata);
+ if (!mpath)
+ mppath = mpp_path_lookup(skb->data, sdata);
+ }
/*
* Use address extension if it is a packet from
enum ieee80211_sta_state state;
for (state = IEEE80211_STA_NOTEXIST;
- state < sta->sta_state - 1; state++)
+ state < sta->sta_state; state++)
WARN_ON(drv_sta_state(local, sta->sdata, sta,
state, state + 1));
}
{
struct xmit_work *work;
- if (!(priv->phy->channels_supported[page] & (1 << chan)))
+ if (!(priv->phy->channels_supported[page] & (1 << chan))) {
WARN_ON(1);
return NETDEV_TX_OK;
+ }
if (!(priv->hw.flags & IEEE802154_HW_OMIT_CKSUM)) {
u16 crc = crc_ccitt(0, skb->data, skb->len);
return 0;
}
+static int
+ip_set_none(struct sock *ctnl, struct sk_buff *skb,
+ const struct nlmsghdr *nlh,
+ const struct nlattr * const attr[])
+{
+ return -EOPNOTSUPP;
+}
+
static int
ip_set_create(struct sock *ctnl, struct sk_buff *skb,
const struct nlmsghdr *nlh,
}
static const struct nfnl_callback ip_set_netlink_subsys_cb[IPSET_MSG_MAX] = {
+ [IPSET_CMD_NONE] = {
+ .call = ip_set_none,
+ .attr_count = IPSET_ATTR_CMD_MAX,
+ },
[IPSET_CMD_CREATE] = {
.call = ip_set_create,
.attr_count = IPSET_ATTR_CMD_MAX,
#define iface_data(n) (rb_entry(n, struct iface_node, node)->iface)
-static inline long
-ifname_compare(const char *_a, const char *_b)
-{
- const long *a = (const long *)_a;
- const long *b = (const long *)_b;
-
- BUILD_BUG_ON(IFNAMSIZ > 4 * sizeof(unsigned long));
- if (a[0] != b[0])
- return a[0] - b[0];
- if (IFNAMSIZ > sizeof(long)) {
- if (a[1] != b[1])
- return a[1] - b[1];
- }
- if (IFNAMSIZ > 2 * sizeof(long)) {
- if (a[2] != b[2])
- return a[2] - b[2];
- }
- if (IFNAMSIZ > 3 * sizeof(long)) {
- if (a[3] != b[3])
- return a[3] - b[3];
- }
- return 0;
-}
-
static void
rbtree_destroy(struct rb_root *root)
{
while (n) {
const char *d = iface_data(n);
- long res = ifname_compare(*iface, d);
+ int res = strcmp(*iface, d);
if (res < 0)
n = n->rb_left;
while (*n) {
char *ifname = iface_data(*n);
- long res = ifname_compare(*iface, ifname);
+ int res = strcmp(*iface, ifname);
p = *n;
if (res < 0)
struct hash_netiface4_elem data = { .cidr = HOST_MASK };
u32 ip = 0, ip_to, last;
u32 timeout = h->timeout;
- char iface[IFNAMSIZ] = {};
+ char iface[IFNAMSIZ];
int ret;
if (unlikely(!tb[IPSET_ATTR_IP] ||
ipset_adtfn adtfn = set->variant->adt[adt];
struct hash_netiface6_elem data = { .cidr = HOST_MASK };
u32 timeout = h->timeout;
- char iface[IFNAMSIZ] = {};
+ char iface[IFNAMSIZ];
int ret;
if (unlikely(!tb[IPSET_ATTR_IP] ||
#ifdef CONFIG_IP_VS_IPV6
/* Taken from rt6_fill_node() in net/ipv6/route.c, is there a better way? */
-static int __ip_vs_addr_is_local_v6(struct net *net,
- const struct in6_addr *addr)
+static bool __ip_vs_addr_is_local_v6(struct net *net,
+ const struct in6_addr *addr)
{
- struct rt6_info *rt;
struct flowi6 fl6 = {
.daddr = *addr,
};
+ struct dst_entry *dst = ip6_route_output(net, NULL, &fl6);
+ bool is_local;
- rt = (struct rt6_info *)ip6_route_output(net, NULL, &fl6);
- if (rt && rt->dst.dev && (rt->dst.dev->flags & IFF_LOOPBACK))
- return 1;
+ is_local = !dst->error && dst->dev && (dst->dev->flags & IFF_LOOPBACK);
- return 0;
+ dst_release(dst);
+ return is_local;
}
#endif
{
struct net_device *dev = ptr;
struct net *net = dev_net(dev);
+ struct netns_ipvs *ipvs = net_ipvs(net);
struct ip_vs_service *svc;
struct ip_vs_dest *dest;
unsigned int idx;
- if (event != NETDEV_UNREGISTER)
+ if (event != NETDEV_UNREGISTER || !ipvs)
return NOTIFY_DONE;
IP_VS_DBG(3, "%s() dev=%s\n", __func__, dev->name);
EnterFunction(2);
}
}
- list_for_each_entry(dest, &net_ipvs(net)->dest_trash, n_list) {
+ list_for_each_entry(dest, &ipvs->dest_trash, n_list) {
__ip_vs_dev_reset(dest, dev);
}
mutex_unlock(&__ip_vs_mutex);
return 0;
/* RTP port is even */
- port &= htons(~1);
- rtp_port = port;
- rtcp_port = htons(ntohs(port) + 1);
+ rtp_port = port & ~htons(1);
+ rtcp_port = port | htons(1);
/* Create expect for RTP */
if ((rtp_exp = nf_ct_expect_alloc(ct)) == NULL)
err = nla_parse(cda, ss->cb[cb_id].attr_count,
attr, attrlen, ss->cb[cb_id].policy);
- if (err < 0)
+ if (err < 0) {
+ rcu_read_unlock();
return err;
+ }
if (nc->call_rcu) {
err = nc->call_rcu(net->nfnl, skb, nlh,
MODULE_ALIAS("ip6t_HMARK");
struct hmark_tuple {
- u32 src;
- u32 dst;
+ __be32 src;
+ __be32 dst;
union hmark_ports uports;
- uint8_t proto;
+ u8 proto;
};
-static inline u32 hmark_addr6_mask(const __u32 *addr32, const __u32 *mask)
+static inline __be32 hmark_addr6_mask(const __be32 *addr32, const __be32 *mask)
{
return (addr32[0] & mask[0]) ^
(addr32[1] & mask[1]) ^
(addr32[3] & mask[3]);
}
-static inline u32
-hmark_addr_mask(int l3num, const __u32 *addr32, const __u32 *mask)
+static inline __be32
+hmark_addr_mask(int l3num, const __be32 *addr32, const __be32 *mask)
{
switch (l3num) {
case AF_INET:
return 0;
}
+static inline void hmark_swap_ports(union hmark_ports *uports,
+ const struct xt_hmark_info *info)
+{
+ union hmark_ports hp;
+ u16 src, dst;
+
+ hp.b32 = (uports->b32 & info->port_mask.b32) | info->port_set.b32;
+ src = ntohs(hp.b16.src);
+ dst = ntohs(hp.b16.dst);
+
+ if (dst > src)
+ uports->v32 = (dst << 16) | src;
+ else
+ uports->v32 = (src << 16) | dst;
+}
+
static int
hmark_ct_set_htuple(const struct sk_buff *skb, struct hmark_tuple *t,
const struct xt_hmark_info *info)
otuple = &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple;
rtuple = &ct->tuplehash[IP_CT_DIR_REPLY].tuple;
- t->src = hmark_addr_mask(otuple->src.l3num, otuple->src.u3.all,
- info->src_mask.all);
- t->dst = hmark_addr_mask(otuple->src.l3num, rtuple->src.u3.all,
- info->dst_mask.all);
+ t->src = hmark_addr_mask(otuple->src.l3num, otuple->src.u3.ip6,
+ info->src_mask.ip6);
+ t->dst = hmark_addr_mask(otuple->src.l3num, rtuple->src.u3.ip6,
+ info->dst_mask.ip6);
if (info->flags & XT_HMARK_FLAG(XT_HMARK_METHOD_L3))
return 0;
t->proto = nf_ct_protonum(ct);
if (t->proto != IPPROTO_ICMP) {
- t->uports.p16.src = otuple->src.u.all;
- t->uports.p16.dst = rtuple->src.u.all;
- t->uports.v32 = (t->uports.v32 & info->port_mask.v32) |
- info->port_set.v32;
- if (t->uports.p16.dst < t->uports.p16.src)
- swap(t->uports.p16.dst, t->uports.p16.src);
+ t->uports.b16.src = otuple->src.u.all;
+ t->uports.b16.dst = rtuple->src.u.all;
+ hmark_swap_ports(&t->uports, info);
}
return 0;
#endif
}
+/* This hash function is endian independent, to ensure consistent hashing if
+ * the cluster is composed of big and little endian systems. */
static inline u32
hmark_hash(struct hmark_tuple *t, const struct xt_hmark_info *info)
{
u32 hash;
+ u32 src = ntohl(t->src);
+ u32 dst = ntohl(t->dst);
- if (t->dst < t->src)
- swap(t->src, t->dst);
+ if (dst < src)
+ swap(src, dst);
- hash = jhash_3words(t->src, t->dst, t->uports.v32, info->hashrnd);
+ hash = jhash_3words(src, dst, t->uports.v32, info->hashrnd);
hash = hash ^ (t->proto & info->proto_mask);
return (((u64)hash * info->hmodulus) >> 32) + info->hoffset;
if (skb_copy_bits(skb, nhoff, &t->uports, sizeof(t->uports)) < 0)
return;
- t->uports.v32 = (t->uports.v32 & info->port_mask.v32) |
- info->port_set.v32;
-
- if (t->uports.p16.dst < t->uports.p16.src)
- swap(t->uports.p16.dst, t->uports.p16.src);
+ hmark_swap_ports(&t->uports, info);
}
#if IS_ENABLED(CONFIG_IP6_NF_IPTABLES)
return -1;
}
noicmp:
- t->src = hmark_addr6_mask(ip6->saddr.s6_addr32, info->src_mask.all);
- t->dst = hmark_addr6_mask(ip6->daddr.s6_addr32, info->dst_mask.all);
+ t->src = hmark_addr6_mask(ip6->saddr.s6_addr32, info->src_mask.ip6);
+ t->dst = hmark_addr6_mask(ip6->daddr.s6_addr32, info->dst_mask.ip6);
if (info->flags & XT_HMARK_FLAG(XT_HMARK_METHOD_L3))
return 0;
}
}
- t->src = (__force u32) ip->saddr;
- t->dst = (__force u32) ip->daddr;
-
- t->src &= info->src_mask.ip;
- t->dst &= info->dst_mask.ip;
+ t->src = ip->saddr & info->src_mask.ip;
+ t->dst = ip->daddr & info->dst_mask.ip;
if (info->flags & XT_HMARK_FLAG(XT_HMARK_METHOD_L3))
return 0;
#include <linux/netfilter/x_tables.h>
#include <linux/netfilter/xt_set.h>
+#include <linux/netfilter/ipset/ip_set_timeout.h>
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>");
info->del_set.flags, 0, UINT_MAX);
/* Normalize to fit into jiffies */
- if (add_opt.timeout > UINT_MAX/MSEC_PER_SEC)
+ if (add_opt.timeout != IPSET_NO_TIMEOUT &&
+ add_opt.timeout > UINT_MAX/MSEC_PER_SEC)
add_opt.timeout = UINT_MAX/MSEC_PER_SEC;
if (info->add_set.index != IPSET_INVALID_ID)
ip_set_add(info->add_set.index, skb, par, &add_opt);
pr_debug("%p\n", sk);
+ if (llcp_sock == NULL || llcp_sock->dev == NULL)
+ return -EBADFD;
+
addr->sa_family = AF_NFC;
*len = sizeof(struct sockaddr_nfc_llcp);
nfca_poll->sens_res = __le16_to_cpu(*((__u16 *)data));
data += 2;
- nfca_poll->nfcid1_len = *data++;
+ nfca_poll->nfcid1_len = min_t(__u8, *data++, NFC_NFCID1_MAXSIZE);
pr_debug("sens_res 0x%x, nfcid1_len %d\n",
nfca_poll->sens_res, nfca_poll->nfcid1_len);
struct rf_tech_specific_params_nfcb_poll *nfcb_poll,
__u8 *data)
{
- nfcb_poll->sensb_res_len = *data++;
+ nfcb_poll->sensb_res_len = min_t(__u8, *data++, NFC_SENSB_RES_MAXSIZE);
pr_debug("sensb_res_len %d\n", nfcb_poll->sensb_res_len);
__u8 *data)
{
nfcf_poll->bit_rate = *data++;
- nfcf_poll->sensf_res_len = *data++;
+ nfcf_poll->sensf_res_len = min_t(__u8, *data++, NFC_SENSF_RES_MAXSIZE);
pr_debug("bit_rate %d, sensf_res_len %d\n",
nfcf_poll->bit_rate, nfcf_poll->sensf_res_len);
switch (ntf->activation_rf_tech_and_mode) {
case NCI_NFC_A_PASSIVE_POLL_MODE:
nfca_poll = &ntf->activation_params.nfca_poll_iso_dep;
- nfca_poll->rats_res_len = *data++;
+ nfca_poll->rats_res_len = min_t(__u8, *data++, 20);
pr_debug("rats_res_len %d\n", nfca_poll->rats_res_len);
if (nfca_poll->rats_res_len > 0) {
memcpy(nfca_poll->rats_res,
case NCI_NFC_B_PASSIVE_POLL_MODE:
nfcb_poll = &ntf->activation_params.nfcb_poll_iso_dep;
- nfcb_poll->attrib_res_len = *data++;
+ nfcb_poll->attrib_res_len = min_t(__u8, *data++, 50);
pr_debug("attrib_res_len %d\n", nfcb_poll->attrib_res_len);
if (nfcb_poll->attrib_res_len > 0) {
memcpy(nfcb_poll->attrib_res,
{
struct sock *sk = sock->sk;
- pr_debug("sock=%p\n", sock);
+ pr_debug("sock=%p sk=%p\n", sock, sk);
+
+ if (!sk)
+ return 0;
sock_orphan(sk);
sock_put(sk);
*
* Copyright (C) 2008 Nokia Corporation.
*
- * Contact: Remi Denis-Courmont <remi.denis-courmont@nokia.com>
- * Original author: Sakari Ailus <sakari.ailus@nokia.com>
+ * Authors: Sakari Ailus <sakari.ailus@nokia.com>
+ * Rémi Denis-Courmont
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
*
* Copyright (C) 2008 Nokia Corporation.
*
- * Contact: Remi Denis-Courmont <remi.denis-courmont@nokia.com>
- * Original author: Sakari Ailus <sakari.ailus@nokia.com>
+ * Authors: Sakari Ailus <sakari.ailus@nokia.com>
+ * Rémi Denis-Courmont
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
*
* Copyright (C) 2008 Nokia Corporation.
*
- * Author: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
+ * Author: Rémi Denis-Courmont
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
*
* Copyright (C) 2008 Nokia Corporation.
*
- * Author: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
+ * Author: Rémi Denis-Courmont
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
*
* Copyright (C) 2008 Nokia Corporation.
*
- * Contact: Remi Denis-Courmont <remi.denis-courmont@nokia.com>
- * Original author: Sakari Ailus <sakari.ailus@nokia.com>
+ * Authors: Sakari Ailus <sakari.ailus@nokia.com>
+ * Rémi Denis-Courmont
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
*
* Copyright (C) 2008 Nokia Corporation.
*
- * Contact: Remi Denis-Courmont <remi.denis-courmont@nokia.com>
- * Original author: Sakari Ailus <sakari.ailus@nokia.com>
+ * Authors: Sakari Ailus <sakari.ailus@nokia.com>
+ * Remi Denis-Courmont
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
*
* Copyright (C) 2008 Nokia Corporation.
*
- * Contact: Remi Denis-Courmont <remi.denis-courmont@nokia.com>
- * Original author: Sakari Ailus <sakari.ailus@nokia.com>
+ * Authors: Sakari Ailus <sakari.ailus@nokia.com>
+ * Rémi Denis-Courmont
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
*
* Copyright (C) 2008 Nokia Corporation.
*
- * Contact: Remi Denis-Courmont <remi.denis-courmont@nokia.com>
+ * Author: Rémi Denis-Courmont
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
return peer;
new_UDP_peer:
- _net("Rx UDP DGRAM from NEW peer %d", peer->debug_id);
+ _net("Rx UDP DGRAM from NEW peer");
read_unlock_bh(&rxrpc_peer_lock);
_leave(" = -EBUSY [new]");
return ERR_PTR(-EBUSY);
return PSCHED_NS2TICKS(ticks);
}
-static int tfifo_enqueue(struct sk_buff *nskb, struct Qdisc *sch)
+static void tfifo_enqueue(struct sk_buff *nskb, struct Qdisc *sch)
{
struct sk_buff_head *list = &sch->q;
psched_time_t tnext = netem_skb_cb(nskb)->time_to_send;
- struct sk_buff *skb;
-
- if (likely(skb_queue_len(list) < sch->limit)) {
- skb = skb_peek_tail(list);
- /* Optimize for add at tail */
- if (likely(!skb || tnext >= netem_skb_cb(skb)->time_to_send))
- return qdisc_enqueue_tail(nskb, sch);
+ struct sk_buff *skb = skb_peek_tail(list);
- skb_queue_reverse_walk(list, skb) {
- if (tnext >= netem_skb_cb(skb)->time_to_send)
- break;
- }
+ /* Optimize for add at tail */
+ if (likely(!skb || tnext >= netem_skb_cb(skb)->time_to_send))
+ return __skb_queue_tail(list, nskb);
- __skb_queue_after(list, skb, nskb);
- sch->qstats.backlog += qdisc_pkt_len(nskb);
- return NET_XMIT_SUCCESS;
+ skb_queue_reverse_walk(list, skb) {
+ if (tnext >= netem_skb_cb(skb)->time_to_send)
+ break;
}
- return qdisc_reshape_fail(nskb, sch);
+ __skb_queue_after(list, skb, nskb);
}
/*
/* We don't fill cb now as skb_unshare() may invalidate it */
struct netem_skb_cb *cb;
struct sk_buff *skb2;
- int ret;
int count = 1;
/* Random duplication */
skb->data[net_random() % skb_headlen(skb)] ^= 1<<(net_random() % 8);
}
+ if (unlikely(skb_queue_len(&sch->q) >= sch->limit))
+ return qdisc_reshape_fail(skb, sch);
+
+ sch->qstats.backlog += qdisc_pkt_len(skb);
+
cb = netem_skb_cb(skb);
if (q->gap == 0 || /* not doing reordering */
q->counter < q->gap - 1 || /* inside last reordering gap */
cb->time_to_send = now + delay;
++q->counter;
- ret = tfifo_enqueue(skb, sch);
+ tfifo_enqueue(skb, sch);
} else {
/*
* Do re-ordering by putting one out of N packets at the front
q->counter = 0;
__skb_queue_head(&sch->q, skb);
- sch->qstats.backlog += qdisc_pkt_len(skb);
sch->qstats.requeues++;
- ret = NET_XMIT_SUCCESS;
- }
-
- if (ret != NET_XMIT_SUCCESS) {
- if (net_xmit_drop_count(ret)) {
- sch->qstats.drops++;
- return ret;
- }
}
return NET_XMIT_SUCCESS;
sch->qstats.backlog = q->qdisc->qstats.backlog;
opts = nla_nest_start(skb, TCA_OPTIONS);
+ if (opts == NULL)
+ goto nla_put_failure;
if (nla_put(skb, TCA_SFB_PARMS, sizeof(opt), &opt))
goto nla_put_failure;
return nla_nest_end(skb, opts);
*/
asoc->peer.sack_needed = 1;
asoc->peer.sack_cnt = 0;
+ asoc->peer.sack_generation = 1;
/* Assume that the peer will tell us if he recognizes ASCONF
* as part of INIT exchange.
epb = &ep->base;
- if (hlist_unhashed(&epb->node))
- return;
-
epb->hashent = sctp_ep_hashfn(epb->bind_addr.port);
head = &sctp_ep_hashtable[epb->hashent];
sctp_write_lock(&head->lock);
- __hlist_del(&epb->node);
+ hlist_del_init(&epb->node);
sctp_write_unlock(&head->lock);
}
head = &sctp_assoc_hashtable[epb->hashent];
sctp_write_lock(&head->lock);
- __hlist_del(&epb->node);
+ hlist_del_init(&epb->node);
sctp_write_unlock(&head->lock);
}
/* If the SACK timer is running, we have a pending SACK */
if (timer_pending(timer)) {
struct sctp_chunk *sack;
+
+ if (pkt->transport->sack_generation !=
+ pkt->transport->asoc->peer.sack_generation)
+ return retval;
+
asoc->a_rwnd = asoc->rwnd;
sack = sctp_make_sack(asoc);
if (sack) {
SCTP_DEBUG_PRINTK("sctp_addrwq_timo_handler: sctp_asconf_mgmt failed\n");
sctp_bh_unlock_sock(sk);
}
+#if IS_ENABLED(CONFIG_IPV6)
free_next:
+#endif
list_del(&addrw->list);
kfree(addrw);
}
int len;
__u32 ctsn;
__u16 num_gabs, num_dup_tsns;
+ struct sctp_association *aptr = (struct sctp_association *)asoc;
struct sctp_tsnmap *map = (struct sctp_tsnmap *)&asoc->peer.tsn_map;
struct sctp_gap_ack_block gabs[SCTP_MAX_GABS];
+ struct sctp_transport *trans;
memset(gabs, 0, sizeof(gabs));
ctsn = sctp_tsnmap_get_ctsn(map);
sctp_addto_chunk(retval, sizeof(__u32) * num_dup_tsns,
sctp_tsnmap_get_dups(map));
+ /* Once we have a sack generated, check to see what our sack
+ * generation is, if its 0, reset the transports to 0, and reset
+ * the association generation to 1
+ *
+ * The idea is that zero is never used as a valid generation for the
+ * association so no transport will match after a wrap event like this,
+ * Until the next sack
+ */
+ if (++aptr->peer.sack_generation == 0) {
+ list_for_each_entry(trans, &asoc->peer.transport_addr_list,
+ transports)
+ trans->sack_generation = 0;
+ aptr->peer.sack_generation = 1;
+ }
nodata:
return retval;
}
case SCTP_CMD_REPORT_TSN:
/* Record the arrival of a TSN. */
error = sctp_tsnmap_mark(&asoc->peer.tsn_map,
- cmd->obj.u32);
+ cmd->obj.u32, NULL);
break;
case SCTP_CMD_REPORT_FWDTSN:
SCTP_DEBUG_PRINTK("About to exit __sctp_connect() free asoc: %p"
" kaddrs: %p err: %d\n",
asoc, kaddrs, err);
- if (asoc)
+ if (asoc) {
+ /* sctp_primitive_ASSOCIATE may have added this association
+ * To the hash table, try to unhash it, just in case, its a noop
+ * if it wasn't hashed so we're safe
+ */
+ sctp_unhash_established(asoc);
sctp_association_free(asoc);
+ }
return err;
}
goto out_unlock;
out_free:
- if (new_asoc)
+ if (new_asoc) {
+ sctp_unhash_established(asoc);
sctp_association_free(asoc);
+ }
out_unlock:
sctp_release_sock(sk);
peer->af_specific = sctp_get_af_specific(addr->sa.sa_family);
memset(&peer->saddr, 0, sizeof(union sctp_addr));
+ peer->sack_generation = 0;
+
/* From 6.3.1 RTO Calculation:
*
* C1) Until an RTT measurement has been made for a packet sent to the
/* Mark this TSN as seen. */
-int sctp_tsnmap_mark(struct sctp_tsnmap *map, __u32 tsn)
+int sctp_tsnmap_mark(struct sctp_tsnmap *map, __u32 tsn,
+ struct sctp_transport *trans)
{
u16 gap;
*/
map->max_tsn_seen++;
map->cumulative_tsn_ack_point++;
+ if (trans)
+ trans->sack_generation =
+ trans->asoc->peer.sack_generation;
map->base_tsn++;
} else {
/* Either we already have a gap, or about to record a gap, so
* can mark it as received so the tsn_map is updated correctly.
*/
if (sctp_tsnmap_mark(&asoc->peer.tsn_map,
- ntohl(chunk->subh.data_hdr->tsn)))
+ ntohl(chunk->subh.data_hdr->tsn),
+ chunk->transport))
goto fail_mark;
/* First calculate the padding, so we don't inadvertently
if (chunk && (freed >= needed)) {
__u32 tsn;
tsn = ntohl(chunk->subh.data_hdr->tsn);
- sctp_tsnmap_mark(&asoc->peer.tsn_map, tsn);
+ sctp_tsnmap_mark(&asoc->peer.tsn_map, tsn, chunk->transport);
sctp_ulpq_tail_data(ulpq, chunk, gfp);
sctp_ulpq_partial_delivery(ulpq, chunk, gfp);
msg->errno = err;
destroy_msg(msg);
} while (!list_empty(head));
- wake_up(waitq);
+
+ if (waitq)
+ wake_up(waitq);
}
static void
}
dentry = dget(pipe->dentry);
spin_unlock(&pipe->lock);
- if (dentry) {
- rpc_purge_list(&RPC_I(dentry->d_inode)->waitq,
- &free_list, destroy_msg, -ETIMEDOUT);
- dput(dentry);
- }
+ rpc_purge_list(dentry ? &RPC_I(dentry->d_inode)->waitq : NULL,
+ &free_list, destroy_msg, -ETIMEDOUT);
+ dput(dentry);
}
ssize_t rpc_pipe_generic_upcall(struct file *filp, struct rpc_pipe_msg *msg,
sizeof(req->rq_snd_buf));
return bc_send(req);
} else {
- /* Nothing to do to drop request */
+ /* drop request */
+ xprt_free_bc_request(req);
return 0;
}
}
cfg80211_hold_bss(bss_from_pub(bss));
wdev->current_bss = bss_from_pub(bss);
+ wdev->sme_state = CFG80211_SME_CONNECTED;
cfg80211_upload_connect_keys(wdev);
nl80211_send_ibss_bssid(wiphy_to_dev(wdev->wiphy), dev, bssid,
struct cfg80211_event *ev;
unsigned long flags;
- CFG80211_DEV_WARN_ON(!wdev->ssid_len);
+ CFG80211_DEV_WARN_ON(wdev->sme_state != CFG80211_SME_CONNECTING);
ev = kzalloc(sizeof(*ev), gfp);
if (!ev)
#ifdef CONFIG_CFG80211_WEXT
wdev->wext.ibss.channel = params->channel;
#endif
+ wdev->sme_state = CFG80211_SME_CONNECTING;
err = rdev->ops->join_ibss(&rdev->wiphy, dev, params);
if (err) {
wdev->connect_keys = NULL;
+ wdev->sme_state = CFG80211_SME_IDLE;
return err;
}
}
wdev->current_bss = NULL;
+ wdev->sme_state = CFG80211_SME_IDLE;
wdev->ssid_len = 0;
#ifdef CONFIG_CFG80211_WEXT
if (!nowext)
spin_unlock(®_requests_lock);
if (last_request->initiator == NL80211_REGDOM_SET_BY_USER)
- cancel_delayed_work_sync(®_timeout);
+ cancel_delayed_work(®_timeout);
if (need_more_processing)
schedule_work(®_work);
ntype == NL80211_IFTYPE_P2P_CLIENT))
return -EBUSY;
- if (ntype != otype) {
+ if (ntype != otype && netif_running(dev)) {
err = cfg80211_can_change_interface(rdev, dev->ieee80211_ptr,
ntype);
if (err)
enum nl80211_iftype iftype)
{
struct wireless_dev *wdev_iter;
+ u32 used_iftypes = BIT(iftype);
int num[NUM_NL80211_IFTYPES];
int total = 1;
int i, j;
num[wdev_iter->iftype]++;
total++;
+ used_iftypes |= BIT(wdev_iter->iftype);
}
mutex_unlock(&rdev->devlist_mtx);
for (i = 0; i < rdev->wiphy.n_iface_combinations; i++) {
const struct ieee80211_iface_combination *c;
struct ieee80211_iface_limit *limits;
+ u32 all_iftypes = 0;
c = &rdev->wiphy.iface_combinations[i];
if (rdev->wiphy.software_iftypes & BIT(iftype))
continue;
for (j = 0; j < c->n_limits; j++) {
+ all_iftypes |= limits[j].types;
if (!(limits[j].types & BIT(iftype)))
continue;
if (limits[j].max < num[iftype])
limits[j].max -= num[iftype];
}
}
- /* yay, it fits */
+
+ /*
+ * Finally check that all iftypes that we're currently
+ * using are actually part of this combination. If they
+ * aren't then we can't use this combination and have
+ * to continue to the next.
+ */
+ if ((all_iftypes & used_iftypes) != used_iftypes)
+ goto cont;
+
+ /*
+ * This combination covered all interface types and
+ * supported the requested numbers, so we're good.
+ */
kfree(limits);
return 0;
cont:
push(@signature_tags, "Reviewed-by:");
push(@signature_tags, "Acked-by:");
+my $signature_pattern = "\(" . join("|", @signature_tags) . "\)";
+
# rfc822 email address - preloaded methods go here.
my $rfc822_lwsp = "(?:(?:\\r\\n)?[ \\t])";
my $rfc822_char = '[\\000-\\377]';
my @status = ();
my %deduplicate_name_hash = ();
my %deduplicate_address_hash = ();
-my $signature_pattern;
my @maintainers = get_maintainers();
#include <linux/mman.h>
#include <linux/mount.h>
#include <linux/personality.h>
+#include <linux/backing-dev.h>
#include <net/flow.h>
#define MAX_LSM_EVM_XATTR 2
ATTR_ATIME_SET | ATTR_MTIME_SET | ATTR_TIMES_SET))
return dentry_has_perm(cred, dentry, FILE__SETATTR);
- if (ia_valid & ATTR_SIZE)
+ if (selinux_policycap_openperm && (ia_valid & ATTR_SIZE))
av |= FILE__OPEN;
return dentry_has_perm(cred, dentry, av);
"node_bind", "name_connect", NULL } },
{ "memprotect", { "mmap_zero", NULL } },
{ "peer", { "recv", NULL } },
- { "capability2", { "mac_override", "mac_admin", "syslog", NULL } },
+ { "capability2",
+ { "mac_override", "mac_admin", "syslog", "wake_alarm", "block_suspend",
+ NULL } },
{ "kernel_service", { "use_as_override", "create_files_as", NULL } },
{ "tun_socket",
{ COMMON_SOCK_PERMS, NULL } },
if (stream->runtime->state != SNDRV_PCM_STATE_RUNNING)
return -EPERM;
retval = stream->ops->trigger(stream, SNDRV_PCM_TRIGGER_PAUSE_PUSH);
- if (!retval) {
+ if (!retval)
stream->runtime->state = SNDRV_PCM_STATE_PAUSED;
- wake_up(&stream->runtime->sleep);
- }
return retval;
}
if (!retval) {
stream->runtime->state = SNDRV_PCM_STATE_SETUP;
wake_up(&stream->runtime->sleep);
+ stream->runtime->hw_pointer = 0;
+ stream->runtime->app_pointer = 0;
+ stream->runtime->total_bytes_available = 0;
+ stream->runtime->total_bytes_transferred = 0;
}
return retval;
}
MODULE_DESCRIPTION("Routines for control of TEA5757/5759 Philips AM/FM radio tuner chips");
MODULE_LICENSE("GPL");
-#define FREQ_LO (76U * 16000)
-#define FREQ_HI (108U * 16000)
+#define FREQ_LO ((tea->tea5759 ? 760 : 875) * 1600U)
+#define FREQ_HI ((tea->tea5759 ? 910 : 1080) * 1600U)
/*
* definitions
return data;
}
-static u32 snd_tea575x_get_freq(struct snd_tea575x *tea)
+static u32 snd_tea575x_val_to_freq(struct snd_tea575x *tea, u32 val)
{
- u32 freq = snd_tea575x_read(tea) & TEA575X_BIT_FREQ_MASK;
+ u32 freq = val & TEA575X_BIT_FREQ_MASK;
if (freq == 0)
return freq;
return clamp(freq * 16, FREQ_LO, FREQ_HI); /* from kHz */
}
+static u32 snd_tea575x_get_freq(struct snd_tea575x *tea)
+{
+ return snd_tea575x_val_to_freq(tea, snd_tea575x_read(tea));
+}
+
static void snd_tea575x_set_freq(struct snd_tea575x *tea)
{
u32 freq = tea->freq;
tea->val &= ~TEA575X_BIT_FREQ_MASK;
tea->val |= freq & TEA575X_BIT_FREQ_MASK;
snd_tea575x_write(tea, tea->val);
+ tea->freq = snd_tea575x_val_to_freq(tea, tea->val);
}
/*
}
static const struct v4l2_file_operations tea575x_fops = {
- .owner = THIS_MODULE,
.unlocked_ioctl = video_ioctl2,
.open = v4l2_fh_open,
.release = v4l2_fh_release,
};
static const struct video_device tea575x_radio = {
- .fops = &tea575x_fops,
.ioctl_ops = &tea575x_ioctl_ops,
.release = video_device_release_empty,
};
/*
* initialize all the tea575x chips
*/
-int snd_tea575x_init(struct snd_tea575x *tea)
+int snd_tea575x_init(struct snd_tea575x *tea, struct module *owner)
{
int retval;
tea->vd.lock = &tea->mutex;
tea->vd.v4l2_dev = tea->v4l2_dev;
tea->vd.ctrl_handler = &tea->ctrl_handler;
+ tea->fops = tea575x_fops;
+ tea->fops.owner = owner;
+ tea->vd.fops = &tea->fops;
set_bit(V4L2_FL_USE_FH_PRIO, &tea->vd.flags);
/* disable hw_freq_seek if we can't use it */
if (tea->cannot_read_data)
chip->tea.ops = &snd_es1968_tea_ops;
strlcpy(chip->tea.card, "SF64-PCE2", sizeof(chip->tea.card));
sprintf(chip->tea.bus_info, "PCI:%s", pci_name(pci));
- if (!snd_tea575x_init(&chip->tea))
+ if (!snd_tea575x_init(&chip->tea, THIS_MODULE))
printk(KERN_INFO "es1968: detected TEA575x radio\n");
#endif
sprintf(chip->tea.bus_info, "PCI:%s", pci_name(pci));
if ((tea575x_tuner & TUNER_TYPE_MASK) > 0 &&
(tea575x_tuner & TUNER_TYPE_MASK) < 4) {
- if (snd_tea575x_init(&chip->tea)) {
+ if (snd_tea575x_init(&chip->tea, THIS_MODULE)) {
snd_printk(KERN_ERR "TEA575x radio not found\n");
snd_fm801_free(chip);
return -ENODEV;
/* autodetect tuner connection */
for (tea575x_tuner = 1; tea575x_tuner <= 3; tea575x_tuner++) {
chip->tea575x_tuner = tea575x_tuner;
- if (!snd_tea575x_init(&chip->tea)) {
+ if (!snd_tea575x_init(&chip->tea, THIS_MODULE)) {
snd_printk(KERN_INFO "detected TEA575x radio type %s\n",
get_tea575x_gpio(chip)->name);
break;
snd-hda-codec-realtek.
This module is automatically loaded at probing.
-config SND_HDA_ENABLE_REALTEK_QUIRKS
- bool "Build static quirks for Realtek codecs"
- depends on SND_HDA_CODEC_REALTEK
- default y
- help
- Say Y here to build the static quirks codes for Realtek codecs.
- If you need the "model" preset that the default BIOS auto-parser
- can't handle, turn this option on.
-
- If your device works with model=auto option, basically you don't
- need the quirk code. By turning this off, you can reduce the
- module size quite a lot.
-
config SND_HDA_CODEC_ANALOG
bool "Build Analog Device HD-audio codec support"
default y
const struct hda_verb *list)
{
const struct hda_verb **v;
- snd_array_init(&spec->verbs, sizeof(struct hda_verb *), 8);
v = snd_array_new(&spec->verbs);
if (!v)
return -ENOMEM;
const struct snd_pci_quirk *quirk,
const struct hda_fixup *fixlist);
+static inline void snd_hda_gen_init(struct hda_gen_spec *spec)
+{
+ snd_array_init(&spec->verbs, sizeof(struct hda_verb *), 8);
+}
+
+static inline void snd_hda_gen_free(struct hda_gen_spec *spec)
+{
+ snd_array_free(&spec->verbs);
+}
+
#endif /* __SOUND_HDA_AUTO_PARSER_H */
{
if (!codec)
return;
+ snd_hda_jack_tbl_clear(codec);
restore_init_pincfgs(codec);
#ifdef CONFIG_SND_HDA_POWER_SAVE
cancel_delayed_work(&codec->power_work);
list_del(&codec->list);
snd_array_free(&codec->mixers);
snd_array_free(&codec->nids);
+ snd_array_free(&codec->cvt_setups);
snd_array_free(&codec->conn_lists);
snd_array_free(&codec->spdif_out);
codec->bus->caddr_tbl[codec->addr] = NULL;
/* free only driver_pins so that init_pins + user_pins are restored */
snd_array_free(&codec->driver_pins);
restore_pincfgs(codec);
+ snd_array_free(&codec->cvt_setups);
+ snd_array_free(&codec->spdif_out);
codec->num_pcms = 0;
codec->pcm_info = NULL;
codec->preset = NULL;
codec->power_jiffies += delta;
}
-/**
- * snd_hda_power_up - Power-up the codec
- * @codec: HD-audio codec
- *
- * Increment the power-up counter and power up the hardware really when
- * not turned on yet.
- */
-void snd_hda_power_up(struct hda_codec *codec)
+/* Transition to powered up, if wait_power_down then wait for a pending
+ * transition to D3 to complete. A pending D3 transition is indicated
+ * with power_transition == -1. */
+static void __snd_hda_power_up(struct hda_codec *codec, bool wait_power_down)
{
struct hda_bus *bus = codec->bus;
spin_lock(&codec->power_lock);
codec->power_count++;
- if (codec->power_on || codec->power_transition > 0) {
+ /* Return if power_on or transitioning to power_on, unless currently
+ * powering down. */
+ if ((codec->power_on || codec->power_transition > 0) &&
+ !(wait_power_down && codec->power_transition < 0)) {
spin_unlock(&codec->power_lock);
return;
}
codec->power_transition = 0;
spin_unlock(&codec->power_lock);
}
+
+/**
+ * snd_hda_power_up - Power-up the codec
+ * @codec: HD-audio codec
+ *
+ * Increment the power-up counter and power up the hardware really when
+ * not turned on yet.
+ */
+void snd_hda_power_up(struct hda_codec *codec)
+{
+ __snd_hda_power_up(codec, false);
+}
EXPORT_SYMBOL_HDA(snd_hda_power_up);
+/**
+ * snd_hda_power_up_d3wait - Power-up the codec after waiting for any pending
+ * D3 transition to complete. This differs from snd_hda_power_up() when
+ * power_transition == -1. snd_hda_power_up sees this case as a nop,
+ * snd_hda_power_up_d3wait waits for the D3 transition to complete then powers
+ * back up.
+ * @codec: HD-audio codec
+ *
+ * Cancel any power down operation hapenning on the work queue, then power up.
+ */
+void snd_hda_power_up_d3wait(struct hda_codec *codec)
+{
+ /* This will cancel and wait for pending power_work to complete. */
+ __snd_hda_power_up(codec, true);
+}
+EXPORT_SYMBOL_HDA(snd_hda_power_up_d3wait);
+
#define power_save(codec) \
((codec)->bus->power_save ? *(codec)->bus->power_save : 0)
*/
#ifdef CONFIG_SND_HDA_POWER_SAVE
void snd_hda_power_up(struct hda_codec *codec);
+void snd_hda_power_up_d3wait(struct hda_codec *codec);
void snd_hda_power_down(struct hda_codec *codec);
void snd_hda_update_power_acct(struct hda_codec *codec);
#else
static inline void snd_hda_power_up(struct hda_codec *codec) {}
+static inline void snd_hda_power_up_d3wait(struct hda_codec *codec) {}
static inline void snd_hda_power_down(struct hda_codec *codec) {}
#endif
buff_step);
snd_pcm_hw_constraint_step(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_BYTES,
buff_step);
- snd_hda_power_up(apcm->codec);
+ snd_hda_power_up_d3wait(apcm->codec);
err = hinfo->ops.open(hinfo, apcm->codec, substream);
if (err < 0) {
azx_release_device(azx_dev);
static int DELAYED_INIT_MARK azx_first_init(struct azx *chip);
static int DELAYED_INIT_MARK azx_probe_continue(struct azx *chip);
+#ifdef SUPPORT_VGA_SWITCHEROO
static struct pci_dev __devinit *get_bound_vga(struct pci_dev *pci);
-#ifdef SUPPORT_VGA_SWITCHEROO
static void azx_vs_set_state(struct pci_dev *pci,
enum vga_switcheroo_state state)
{
#else
#define init_vga_switcheroo(chip) /* NOP */
#define register_vga_switcheroo(chip) 0
+#define check_hdmi_disabled(pci) false
#endif /* SUPPORT_VGA_SWITCHER */
/*
return azx_free(device->device_data);
}
+#ifdef SUPPORT_VGA_SWITCHEROO
/*
* Check of disabled HDMI controller by vga-switcheroo
*/
struct pci_dev *p = get_bound_vga(pci);
if (p) {
- if (vga_default_device() && p != vga_default_device())
+ if (vga_switcheroo_get_client_state(p) == VGA_SWITCHEROO_OFF)
vga_inactive = true;
pci_dev_put(p);
}
return vga_inactive;
}
+#endif /* SUPPORT_VGA_SWITCHEROO */
/*
* white/black-listing for position_fix
{ PCI_DEVICE(0x6549, 0x1200),
.driver_data = AZX_DRIVER_TERA | AZX_DCAPS_NO_64BIT },
/* Creative X-Fi (CA0110-IBG) */
+ /* CTHDA chips */
+ { PCI_DEVICE(0x1102, 0x0010),
+ .driver_data = AZX_DRIVER_CTHDA | AZX_DCAPS_PRESET_CTHDA },
+ { PCI_DEVICE(0x1102, 0x0012),
+ .driver_data = AZX_DRIVER_CTHDA | AZX_DCAPS_PRESET_CTHDA },
#if !defined(CONFIG_SND_CTXFI) && !defined(CONFIG_SND_CTXFI_MODULE)
/* the following entry conflicts with snd-ctxfi driver,
* as ctxfi driver mutates from HD-audio to native mode with
.driver_data = AZX_DRIVER_CTX | AZX_DCAPS_CTX_WORKAROUND |
AZX_DCAPS_RIRB_PRE_DELAY | AZX_DCAPS_POSFIX_LPIB },
#endif
- /* CTHDA chips */
- { PCI_DEVICE(0x1102, 0x0010),
- .driver_data = AZX_DRIVER_CTHDA | AZX_DCAPS_PRESET_CTHDA },
- { PCI_DEVICE(0x1102, 0x0012),
- .driver_data = AZX_DRIVER_CTHDA | AZX_DCAPS_PRESET_CTHDA },
/* Vortex86MX */
{ PCI_DEVICE(0x17f3, 0x3010), .driver_data = AZX_DRIVER_GENERIC },
/* VMware HDAudio */
static void conexant_free(struct hda_codec *codec)
{
+ struct conexant_spec *spec = codec->spec;
+ snd_hda_gen_free(&spec->gen);
snd_hda_detach_beep_device(codec);
- kfree(codec->spec);
+ kfree(spec);
}
static const struct snd_kcontrol_new cxt_capture_mixers[] = {
static int cx_auto_init(struct hda_codec *codec)
{
struct conexant_spec *spec = codec->spec;
- /*snd_hda_sequence_write(codec, cx_auto_init_verbs);*/
+ snd_hda_gen_apply_verbs(codec);
cx_auto_init_output(codec);
cx_auto_init_input(codec);
cx_auto_init_digital(codec);
SND_PCI_QUIRK(0x17aa, 0x21ce, "Lenovo T420", CXT_PINCFG_LENOVO_TP410),
SND_PCI_QUIRK(0x17aa, 0x21cf, "Lenovo T520", CXT_PINCFG_LENOVO_TP410),
SND_PCI_QUIRK(0x17aa, 0x3975, "Lenovo U300s", CXT_FIXUP_STEREO_DMIC),
+ SND_PCI_QUIRK(0x17aa, 0x397b, "Lenovo S205", CXT_FIXUP_STEREO_DMIC),
{}
};
if (!spec)
return -ENOMEM;
codec->spec = spec;
+ snd_hda_gen_init(&spec->gen);
switch (codec->vendor_id) {
case 0x14f15045:
alc_fix_pll(codec);
alc_auto_init_amp(codec, spec->init_amp);
+ snd_hda_gen_apply_verbs(codec);
alc_init_special_input_src(codec);
alc_auto_init_std(codec);
alc_shutup(codec);
alc_free_kctls(codec);
alc_free_bind_ctls(codec);
+ snd_hda_gen_free(&spec->gen);
kfree(spec);
snd_hda_detach_beep_device(codec);
}
return -ENOMEM;
codec->spec = spec;
spec->mixer_nid = mixer_nid;
+ snd_hda_gen_init(&spec->gen);
err = alc_codec_rename_from_preset(codec);
if (err < 0) {
ALC662_FIXUP_ASUS_MODE7,
ALC662_FIXUP_ASUS_MODE8,
ALC662_FIXUP_NO_JACK_DETECT,
+ ALC662_FIXUP_ZOTAC_Z68,
};
static const struct alc_fixup alc662_fixups[] = {
.type = ALC_FIXUP_FUNC,
.v.func = alc_fixup_no_jack_detect,
},
+ [ALC662_FIXUP_ZOTAC_Z68] = {
+ .type = ALC_FIXUP_PINS,
+ .v.pins = (const struct alc_pincfg[]) {
+ { 0x1b, 0x02214020 }, /* Front HP */
+ { }
+ }
+ },
};
static const struct snd_pci_quirk alc662_fixup_tbl[] = {
SND_PCI_QUIRK(0x144d, 0xc051, "Samsung R720", ALC662_FIXUP_IDEAPAD),
SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo Ideapad Y550P", ALC662_FIXUP_IDEAPAD),
SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo Ideapad Y550", ALC662_FIXUP_IDEAPAD),
+ SND_PCI_QUIRK(0x19da, 0xa130, "Zotac Z68", ALC662_FIXUP_ZOTAC_Z68),
SND_PCI_QUIRK(0x1b35, 0x2206, "CZC P10T", ALC662_FIXUP_CZC_P10T),
#if 0
{}
};
+static void alc662_fill_coef(struct hda_codec *codec)
+{
+ int val, coef;
+
+ coef = alc_get_coef0(codec);
+
+ switch (codec->vendor_id) {
+ case 0x10ec0662:
+ if ((coef & 0x00f0) == 0x0030) {
+ val = alc_read_coef_idx(codec, 0x4); /* EAPD Ctrl */
+ alc_write_coef_idx(codec, 0x4, val & ~(1<<10));
+ }
+ break;
+ case 0x10ec0272:
+ case 0x10ec0273:
+ case 0x10ec0663:
+ case 0x10ec0665:
+ case 0x10ec0670:
+ case 0x10ec0671:
+ case 0x10ec0672:
+ val = alc_read_coef_idx(codec, 0xd); /* EAPD Ctrl */
+ alc_write_coef_idx(codec, 0xd, val | (1<<14));
+ break;
+ }
+}
/*
*/
alc_fix_pll_init(codec, 0x20, 0x04, 15);
- if ((alc_get_coef0(codec) & (1 << 14)) &&
- codec->bus->pci->subsystem_vendor == 0x1025 &&
- spec->cdefine.platform_type == 1) {
- if (alc_codec_rename(codec, "ALC272X") < 0)
- goto error;
- }
+ spec->init_hook = alc662_fill_coef;
+ alc662_fill_coef(codec);
alc_pick_fixup(codec, alc662_fixup_models,
alc662_fixup_tbl, alc662_fixups);
alc_auto_parse_customize_define(codec);
+ if ((alc_get_coef0(codec) & (1 << 14)) &&
+ codec->bus->pci->subsystem_vendor == 0x1025 &&
+ spec->cdefine.platform_type == 1) {
+ if (alc_codec_rename(codec, "ALC272X") < 0)
+ goto error;
+ }
+
/* automatic parse from the BIOS config */
err = alc662_parse_auto_config(codec);
if (err < 0)
{ .id = 0x10ec0272, .name = "ALC272", .patch = patch_alc662 },
{ .id = 0x10ec0275, .name = "ALC275", .patch = patch_alc269 },
{ .id = 0x10ec0276, .name = "ALC276", .patch = patch_alc269 },
+ { .id = 0x10ec0280, .name = "ALC280", .patch = patch_alc269 },
{ .id = 0x10ec0861, .rev = 0x100340, .name = "ALC660",
.patch = patch_alc861 },
{ .id = 0x10ec0660, .name = "ALC660-VD", .patch = patch_alc861vd },
AC_PINCTL_IN_EN);
for (i = 0; i < spec->num_pwrs; i++) {
hda_nid_t nid = spec->pwr_nids[i];
- int pinctl, def_conf;
+ unsigned int pinctl, def_conf;
def_conf = snd_hda_codec_get_pincfg(codec, nid);
def_conf = get_defcfg_connect(def_conf);
stac_toggle_power_map(codec, nid, 0);
continue;
}
+ if (def_conf == AC_JACK_PORT_FIXED) {
+ /* no need for jack detection for fixed pins */
+ stac_toggle_power_map(codec, nid, 1);
+ continue;
+ }
/* power on when no jack detection is available */
/* or when the VREF is used for controlling LED */
if (!spec->hp_detect ||
}
found:
- data = snd_soc_read(codec, AIC3X_PLL_PROGA_REG);
- snd_soc_write(codec, AIC3X_PLL_PROGA_REG,
- data | (pll_p << PLLP_SHIFT));
+ snd_soc_update_bits(codec, AIC3X_PLL_PROGA_REG, PLLP_MASK, pll_p);
snd_soc_write(codec, AIC3X_OVRF_STATUS_AND_PLLR_REG,
pll_r << PLLR_SHIFT);
snd_soc_write(codec, AIC3X_PLL_PROGB_REG, pll_j << PLLJ_SHIFT);
/* PLL registers bitfields */
#define PLLP_SHIFT 0
+#define PLLP_MASK 7
#define PLLQ_SHIFT 3
#define PLLR_SHIFT 0
#define PLLJ_SHIFT 2
}
static int wm2000_poll_bit(struct i2c_client *i2c,
- unsigned int reg, u8 mask, int timeout)
+ unsigned int reg, u8 mask)
{
+ int timeout = 4000;
int val;
val = wm2000_read(i2c, reg);
static int wm2000_power_up(struct i2c_client *i2c, int analogue)
{
struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
- int ret, timeout;
+ int ret;
BUG_ON(wm2000->anc_mode != ANC_OFF);
/* Wait for ANC engine to become ready */
if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT,
- WM2000_ANC_ENG_IDLE, 1)) {
+ WM2000_ANC_ENG_IDLE)) {
dev_err(&i2c->dev, "ANC engine failed to reset\n");
return -ETIMEDOUT;
}
if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
- WM2000_STATUS_BOOT_COMPLETE, 1)) {
+ WM2000_STATUS_BOOT_COMPLETE)) {
dev_err(&i2c->dev, "ANC engine failed to initialise\n");
return -ETIMEDOUT;
}
dev_dbg(&i2c->dev, "Download complete\n");
if (analogue) {
- timeout = 248;
- wm2000_write(i2c, WM2000_REG_ANA_VMID_PU_TIME, timeout / 4);
+ wm2000_write(i2c, WM2000_REG_ANA_VMID_PU_TIME, 248 / 4);
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_ANA_SEQ_INCLUDE |
WM2000_MODE_MOUSE_ENABLE |
WM2000_MODE_THERMAL_ENABLE);
} else {
- timeout = 10;
-
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_MOUSE_ENABLE |
WM2000_MODE_THERMAL_ENABLE);
wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_INT_N_CLR);
if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
- WM2000_STATUS_MOUSE_ACTIVE, timeout)) {
- dev_err(&i2c->dev, "Timed out waiting for device after %dms\n",
- timeout * 10);
+ WM2000_STATUS_MOUSE_ACTIVE)) {
+ dev_err(&i2c->dev, "Timed out waiting for device\n");
return -ETIMEDOUT;
}
static int wm2000_power_down(struct i2c_client *i2c, int analogue)
{
struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
- int timeout;
if (analogue) {
- timeout = 248;
- wm2000_write(i2c, WM2000_REG_ANA_VMID_PD_TIME, timeout / 4);
+ wm2000_write(i2c, WM2000_REG_ANA_VMID_PD_TIME, 248 / 4);
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_ANA_SEQ_INCLUDE |
WM2000_MODE_POWER_DOWN);
} else {
- timeout = 10;
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_POWER_DOWN);
}
if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
- WM2000_STATUS_POWER_DOWN_COMPLETE, timeout)) {
+ WM2000_STATUS_POWER_DOWN_COMPLETE)) {
dev_err(&i2c->dev, "Timeout waiting for ANC power down\n");
return -ETIMEDOUT;
}
if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT,
- WM2000_ANC_ENG_IDLE, 1)) {
+ WM2000_ANC_ENG_IDLE)) {
dev_err(&i2c->dev, "Timeout waiting for ANC engine idle\n");
return -ETIMEDOUT;
}
}
if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
- WM2000_STATUS_ANC_DISABLED, 10)) {
+ WM2000_STATUS_ANC_DISABLED)) {
dev_err(&i2c->dev, "Timeout waiting for ANC disable\n");
return -ETIMEDOUT;
}
if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT,
- WM2000_ANC_ENG_IDLE, 1)) {
+ WM2000_ANC_ENG_IDLE)) {
dev_err(&i2c->dev, "Timeout waiting for ANC engine idle\n");
return -ETIMEDOUT;
}
wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_INT_N_CLR);
if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
- WM2000_STATUS_MOUSE_ACTIVE, 10)) {
+ WM2000_STATUS_MOUSE_ACTIVE)) {
dev_err(&i2c->dev, "Timed out waiting for MOUSE\n");
return -ETIMEDOUT;
}
static int wm2000_enter_standby(struct i2c_client *i2c, int analogue)
{
struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
- int timeout;
BUG_ON(wm2000->anc_mode != ANC_ACTIVE);
if (analogue) {
- timeout = 248;
- wm2000_write(i2c, WM2000_REG_ANA_VMID_PD_TIME, timeout / 4);
+ wm2000_write(i2c, WM2000_REG_ANA_VMID_PD_TIME, 248 / 4);
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_ANA_SEQ_INCLUDE |
WM2000_MODE_THERMAL_ENABLE |
WM2000_MODE_STANDBY_ENTRY);
} else {
- timeout = 10;
-
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_THERMAL_ENABLE |
WM2000_MODE_STANDBY_ENTRY);
}
if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
- WM2000_STATUS_ANC_DISABLED, timeout)) {
+ WM2000_STATUS_ANC_DISABLED)) {
dev_err(&i2c->dev,
"Timed out waiting for ANC disable after 1ms\n");
return -ETIMEDOUT;
}
- if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT, WM2000_ANC_ENG_IDLE,
- 1)) {
+ if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT, WM2000_ANC_ENG_IDLE)) {
dev_err(&i2c->dev,
- "Timed out waiting for standby after %dms\n",
- timeout * 10);
+ "Timed out waiting for standby\n");
return -ETIMEDOUT;
}
static int wm2000_exit_standby(struct i2c_client *i2c, int analogue)
{
struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
- int timeout;
BUG_ON(wm2000->anc_mode != ANC_STANDBY);
wm2000_write(i2c, WM2000_REG_SYS_CTL1, 0);
if (analogue) {
- timeout = 248;
- wm2000_write(i2c, WM2000_REG_ANA_VMID_PU_TIME, timeout / 4);
+ wm2000_write(i2c, WM2000_REG_ANA_VMID_PU_TIME, 248 / 4);
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_ANA_SEQ_INCLUDE |
WM2000_MODE_THERMAL_ENABLE |
WM2000_MODE_MOUSE_ENABLE);
} else {
- timeout = 10;
-
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_THERMAL_ENABLE |
WM2000_MODE_MOUSE_ENABLE);
wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_INT_N_CLR);
if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
- WM2000_STATUS_MOUSE_ACTIVE, timeout)) {
- dev_err(&i2c->dev, "Timed out waiting for MOUSE after %dms\n",
- timeout * 10);
+ WM2000_STATUS_MOUSE_ACTIVE)) {
+ dev_err(&i2c->dev, "Timed out waiting for MOUSE\n");
return -ETIMEDOUT;
}
static int wm2200_bclk_rates_cd[WM2200_NUM_BCLK_RATES] = {
5644800,
+ 3763200,
2882400,
1881600,
1411200,
return ret;
}
+ regcache_cache_only(wm8904->regmap, false);
regcache_sync(wm8904->regmap);
/* Enable bias */
snd_soc_update_bits(codec, WM8904_BIAS_CONTROL_0,
WM8904_BIAS_ENA, 0);
-#ifdef CONFIG_REGULATOR
- /* Post 2.6.34 we will be able to get a callback when
- * the regulators are disabled which we can use but
- * for now just assume that the power will be cut if
- * the regulator API is in use.
- */
- codec->cache_sync = 1;
-#endif
+ regcache_cache_only(wm8904->regmap, true);
+ regcache_mark_dirty(wm8904->regmap);
regulator_bulk_disable(ARRAY_SIZE(wm8904->supplies),
wm8904->supplies);
{
struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
struct wm8904_pdata *pdata = wm8904->pdata;
- u16 *reg_cache = codec->reg_cache;
int ret, i;
- codec->cache_sync = 1;
codec->control_data = wm8904->regmap;
switch (wm8904->devtype) {
goto err_enable;
}
+ regcache_cache_only(wm8904->regmap, true);
/* Change some default settings - latch VU and enable ZC */
snd_soc_update_bits(codec, WM8904_ADC_DIGITAL_VOLUME_LEFT,
WM8904_ADC_VU, WM8904_ADC_VU);
if (!pdata->gpio_cfg[i])
continue;
- reg_cache[WM8904_GPIO_CONTROL_1 + i]
- = pdata->gpio_cfg[i] & 0xffff;
+ regmap_update_bits(wm8904->regmap,
+ WM8904_GPIO_CONTROL_1 + i,
+ 0xffff,
+ pdata->gpio_cfg[i]);
}
/* Zero is the default value for these anyway */
for (i = 0; i < WM8904_MIC_REGS; i++)
- reg_cache[WM8904_MIC_BIAS_CONTROL_0 + i]
- = pdata->mic_cfg[i];
+ regmap_update_bits(wm8904->regmap,
+ WM8904_MIC_BIAS_CONTROL_0 + i,
+ 0xffff,
+ pdata->mic_cfg[i]);
}
/* Set Class W by default - this will be managed by the Class
#define WM8994_NUM_DRC 3
#define WM8994_NUM_EQ 3
+static struct {
+ unsigned int reg;
+ unsigned int mask;
+} wm8994_vu_bits[] = {
+ { WM8994_LEFT_LINE_INPUT_1_2_VOLUME, WM8994_IN1_VU },
+ { WM8994_RIGHT_LINE_INPUT_1_2_VOLUME, WM8994_IN1_VU },
+ { WM8994_LEFT_LINE_INPUT_3_4_VOLUME, WM8994_IN2_VU },
+ { WM8994_RIGHT_LINE_INPUT_3_4_VOLUME, WM8994_IN2_VU },
+ { WM8994_SPEAKER_VOLUME_LEFT, WM8994_SPKOUT_VU },
+ { WM8994_SPEAKER_VOLUME_RIGHT, WM8994_SPKOUT_VU },
+ { WM8994_LEFT_OUTPUT_VOLUME, WM8994_HPOUT1_VU },
+ { WM8994_RIGHT_OUTPUT_VOLUME, WM8994_HPOUT1_VU },
+ { WM8994_LEFT_OPGA_VOLUME, WM8994_MIXOUT_VU },
+ { WM8994_RIGHT_OPGA_VOLUME, WM8994_MIXOUT_VU },
+
+ { WM8994_AIF1_DAC1_LEFT_VOLUME, WM8994_AIF1DAC1_VU },
+ { WM8994_AIF1_DAC1_RIGHT_VOLUME, WM8994_AIF1DAC1_VU },
+ { WM8994_AIF1_DAC2_LEFT_VOLUME, WM8994_AIF1DAC2_VU },
+ { WM8994_AIF1_DAC2_RIGHT_VOLUME, WM8994_AIF1DAC2_VU },
+ { WM8994_AIF2_DAC_LEFT_VOLUME, WM8994_AIF2DAC_VU },
+ { WM8994_AIF2_DAC_RIGHT_VOLUME, WM8994_AIF2DAC_VU },
+ { WM8994_AIF1_ADC1_LEFT_VOLUME, WM8994_AIF1ADC1_VU },
+ { WM8994_AIF1_ADC1_RIGHT_VOLUME, WM8994_AIF1ADC1_VU },
+ { WM8994_AIF1_ADC2_LEFT_VOLUME, WM8994_AIF1ADC2_VU },
+ { WM8994_AIF1_ADC2_RIGHT_VOLUME, WM8994_AIF1ADC2_VU },
+ { WM8994_AIF2_ADC_LEFT_VOLUME, WM8994_AIF2ADC_VU },
+ { WM8994_AIF2_ADC_RIGHT_VOLUME, WM8994_AIF1ADC2_VU },
+ { WM8994_DAC1_LEFT_VOLUME, WM8994_DAC1_VU },
+ { WM8994_DAC1_RIGHT_VOLUME, WM8994_DAC1_VU },
+ { WM8994_DAC2_LEFT_VOLUME, WM8994_DAC2_VU },
+ { WM8994_DAC2_RIGHT_VOLUME, WM8994_DAC2_VU },
+};
+
static int wm8994_drc_base[] = {
WM8994_AIF1_DRC1_1,
WM8994_AIF1_DRC2_1,
{
struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
- if (!wm8994->jackdet || !wm8994->jack_cb)
- return;
-
if (!wm8994->jackdet || !wm8994->jack_cb)
return;
struct snd_soc_codec *codec = w->codec;
struct wm8994 *control = codec->control_data;
int mask = WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC1R_ENA;
+ int i;
int dac;
int adc;
int val;
WM8994_AIF1DAC2L_ENA);
break;
+ case SND_SOC_DAPM_POST_PMU:
+ for (i = 0; i < ARRAY_SIZE(wm8994_vu_bits); i++)
+ snd_soc_write(codec, wm8994_vu_bits[i].reg,
+ snd_soc_read(codec,
+ wm8994_vu_bits[i].reg));
+ break;
+
case SND_SOC_DAPM_PRE_PMD:
case SND_SOC_DAPM_POST_PMD:
snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_5,
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_codec *codec = w->codec;
+ int i;
int dac;
int adc;
int val;
WM8994_AIF2DACR_ENA);
break;
+ case SND_SOC_DAPM_POST_PMU:
+ for (i = 0; i < ARRAY_SIZE(wm8994_vu_bits); i++)
+ snd_soc_write(codec, wm8994_vu_bits[i].reg,
+ snd_soc_read(codec,
+ wm8994_vu_bits[i].reg));
+ break;
+
case SND_SOC_DAPM_PRE_PMD:
case SND_SOC_DAPM_POST_PMD:
snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_5,
switch (event) {
case SND_SOC_DAPM_PRE_PMU:
if (wm8994->aif1clk_enable) {
- aif1clk_ev(w, kcontrol, event);
+ aif1clk_ev(w, kcontrol, SND_SOC_DAPM_PRE_PMU);
snd_soc_update_bits(codec, WM8994_AIF1_CLOCKING_1,
WM8994_AIF1CLK_ENA_MASK,
WM8994_AIF1CLK_ENA);
+ aif1clk_ev(w, kcontrol, SND_SOC_DAPM_POST_PMU);
wm8994->aif1clk_enable = 0;
}
if (wm8994->aif2clk_enable) {
- aif2clk_ev(w, kcontrol, event);
+ aif2clk_ev(w, kcontrol, SND_SOC_DAPM_PRE_PMU);
snd_soc_update_bits(codec, WM8994_AIF2_CLOCKING_1,
WM8994_AIF2CLK_ENA_MASK,
WM8994_AIF2CLK_ENA);
+ aif2clk_ev(w, kcontrol, SND_SOC_DAPM_POST_PMU);
wm8994->aif2clk_enable = 0;
}
break;
switch (event) {
case SND_SOC_DAPM_POST_PMD:
if (wm8994->aif1clk_disable) {
+ aif1clk_ev(w, kcontrol, SND_SOC_DAPM_PRE_PMD);
snd_soc_update_bits(codec, WM8994_AIF1_CLOCKING_1,
WM8994_AIF1CLK_ENA_MASK, 0);
- aif1clk_ev(w, kcontrol, event);
+ aif1clk_ev(w, kcontrol, SND_SOC_DAPM_POST_PMD);
wm8994->aif1clk_disable = 0;
}
if (wm8994->aif2clk_disable) {
+ aif2clk_ev(w, kcontrol, SND_SOC_DAPM_PRE_PMD);
snd_soc_update_bits(codec, WM8994_AIF2_CLOCKING_1,
WM8994_AIF2CLK_ENA_MASK, 0);
- aif2clk_ev(w, kcontrol, event);
+ aif2clk_ev(w, kcontrol, SND_SOC_DAPM_POST_PMD);
wm8994->aif2clk_disable = 0;
}
break;
static const struct snd_soc_dapm_widget wm8994_lateclk_widgets[] = {
SND_SOC_DAPM_SUPPLY("AIF1CLK", WM8994_AIF1_CLOCKING_1, 0, 0, aif1clk_ev,
- SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD),
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
+ SND_SOC_DAPM_PRE_PMD),
SND_SOC_DAPM_SUPPLY("AIF2CLK", WM8994_AIF2_CLOCKING_1, 0, 0, aif2clk_ev,
- SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD),
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
+ SND_SOC_DAPM_PRE_PMD),
SND_SOC_DAPM_PGA("Direct Voice", SND_SOC_NOPM, 0, 0, NULL, 0),
SND_SOC_DAPM_MIXER("SPKL", WM8994_POWER_MANAGEMENT_3, 8, 0,
left_speaker_mixer, ARRAY_SIZE(left_speaker_mixer)),
pm_runtime_put(codec->dev);
- /* Latch volume updates (right only; we always do left then right). */
- snd_soc_update_bits(codec, WM8994_AIF1_DAC1_LEFT_VOLUME,
- WM8994_AIF1DAC1_VU, WM8994_AIF1DAC1_VU);
- snd_soc_update_bits(codec, WM8994_AIF1_DAC1_RIGHT_VOLUME,
- WM8994_AIF1DAC1_VU, WM8994_AIF1DAC1_VU);
- snd_soc_update_bits(codec, WM8994_AIF1_DAC2_LEFT_VOLUME,
- WM8994_AIF1DAC2_VU, WM8994_AIF1DAC2_VU);
- snd_soc_update_bits(codec, WM8994_AIF1_DAC2_RIGHT_VOLUME,
- WM8994_AIF1DAC2_VU, WM8994_AIF1DAC2_VU);
- snd_soc_update_bits(codec, WM8994_AIF2_DAC_LEFT_VOLUME,
- WM8994_AIF2DAC_VU, WM8994_AIF2DAC_VU);
- snd_soc_update_bits(codec, WM8994_AIF2_DAC_RIGHT_VOLUME,
- WM8994_AIF2DAC_VU, WM8994_AIF2DAC_VU);
- snd_soc_update_bits(codec, WM8994_AIF1_ADC1_LEFT_VOLUME,
- WM8994_AIF1ADC1_VU, WM8994_AIF1ADC1_VU);
- snd_soc_update_bits(codec, WM8994_AIF1_ADC1_RIGHT_VOLUME,
- WM8994_AIF1ADC1_VU, WM8994_AIF1ADC1_VU);
- snd_soc_update_bits(codec, WM8994_AIF1_ADC2_LEFT_VOLUME,
- WM8994_AIF1ADC2_VU, WM8994_AIF1ADC2_VU);
- snd_soc_update_bits(codec, WM8994_AIF1_ADC2_RIGHT_VOLUME,
- WM8994_AIF1ADC2_VU, WM8994_AIF1ADC2_VU);
- snd_soc_update_bits(codec, WM8994_AIF2_ADC_LEFT_VOLUME,
- WM8994_AIF2ADC_VU, WM8994_AIF1ADC2_VU);
- snd_soc_update_bits(codec, WM8994_AIF2_ADC_RIGHT_VOLUME,
- WM8994_AIF2ADC_VU, WM8994_AIF1ADC2_VU);
- snd_soc_update_bits(codec, WM8994_DAC1_LEFT_VOLUME,
- WM8994_DAC1_VU, WM8994_DAC1_VU);
- snd_soc_update_bits(codec, WM8994_DAC1_RIGHT_VOLUME,
- WM8994_DAC1_VU, WM8994_DAC1_VU);
- snd_soc_update_bits(codec, WM8994_DAC2_LEFT_VOLUME,
- WM8994_DAC2_VU, WM8994_DAC2_VU);
- snd_soc_update_bits(codec, WM8994_DAC2_RIGHT_VOLUME,
- WM8994_DAC2_VU, WM8994_DAC2_VU);
+ /* Latch volume update bits */
+ for (i = 0; i < ARRAY_SIZE(wm8994_vu_bits); i++)
+ snd_soc_update_bits(codec, wm8994_vu_bits[i].reg,
+ wm8994_vu_bits[i].mask,
+ wm8994_vu_bits[i].mask);
/* Set the low bit of the 3D stereo depth so TLV matches */
snd_soc_update_bits(codec, WM8994_AIF1_DAC1_FILTERS_2,
}
}
- regcache_cache_only(codec->control_data, true);
-
/* Apply platform data settings */
snd_soc_update_bits(codec, WM8996_LINE_INPUT_CONTROL,
WM8996_INL_MODE_MASK | WM8996_INR_MODE_MASK,
for (i = 0; i < ARRAY_SIZE(wm8996->supplies); i++)
regulator_unregister_notifier(wm8996->supplies[i].consumer,
&wm8996->disable_nb[i]);
- regulator_bulk_free(ARRAY_SIZE(wm8996->supplies), wm8996->supplies);
return 0;
}
dev_info(&i2c->dev, "revision %c\n",
(reg & WM8996_CHIP_REV_MASK) + 'A');
- regulator_bulk_disable(ARRAY_SIZE(wm8996->supplies), wm8996->supplies);
-
ret = wm8996_reset(wm8996);
if (ret < 0) {
dev_err(&i2c->dev, "Failed to issue reset\n");
goto err_regmap;
}
+ regcache_cache_only(wm8996->regmap, true);
+ regulator_bulk_disable(ARRAY_SIZE(wm8996->supplies), wm8996->supplies);
+
wm8996_init_gpio(wm8996);
ret = snd_soc_register_codec(&i2c->dev,
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include <linux/pinctrl/consumer.h>
#include "imx-audmux.h"
static int __devinit imx_audmux_probe(struct platform_device *pdev)
{
struct resource *res;
+ struct pinctrl *pinctrl;
const struct of_device_id *of_id =
of_match_device(imx_audmux_dt_ids, &pdev->dev);
if (!audmux_base)
return -EADDRNOTAVAIL;
+ pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+ if (IS_ERR(pinctrl)) {
+ dev_err(&pdev->dev, "setup pinctrl failed!");
+ return PTR_ERR(pinctrl);
+ }
+
audmux_clk = clk_get(&pdev->dev, "audmux");
if (IS_ERR(audmux_clk)) {
dev_dbg(&pdev->dev, "cannot get clock: %ld\n",
#include <mach/hardware.h>
#include <mach/dma.h>
-#include <mach/audio.h>
#include "../../arm/pxa2xx-pcm.h"
#include "pxa-ssp.h"
{
u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0);
- if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP) {
+ if (ssp->type == PXA25x_SSP) {
sscr0 &= ~0x0000ff00;
sscr0 |= ((div - 2)/2) << 8; /* 2..512 */
} else {
u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0);
u32 div;
- if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP)
+ if (ssp->type == PXA25x_SSP)
div = ((sscr0 >> 8) & 0xff) * 2 + 2;
else
div = ((sscr0 >> 8) & 0xfff) + 1;
break;
case PXA_SSP_CLK_PLL:
/* Internal PLL is fixed */
- if (cpu_is_pxa25x())
+ if (ssp->type == PXA25x_SSP)
priv->sysclk = 1843200;
else
priv->sysclk = 13000000;
/* The SSP clock must be disabled when changing SSP clock mode
* on PXA2xx. On PXA3xx it must be enabled when doing so. */
- if (!cpu_is_pxa3xx())
+ if (ssp->type != PXA3xx_SSP)
clk_disable(ssp->clk);
val = pxa_ssp_read_reg(ssp, SSCR0) | sscr0;
pxa_ssp_write_reg(ssp, SSCR0, val);
- if (!cpu_is_pxa3xx())
+ if (ssp->type != PXA3xx_SSP)
clk_enable(ssp->clk);
return 0;
case PXA_SSP_AUDIO_DIV_SCDB:
val = pxa_ssp_read_reg(ssp, SSACD);
val &= ~SSACD_SCDB;
-#if defined(CONFIG_PXA3xx)
- if (cpu_is_pxa3xx())
+ if (ssp->type == PXA3xx_SSP)
val &= ~SSACD_SCDX8;
-#endif
switch (div) {
case PXA_SSP_CLK_SCDB_1:
val |= SSACD_SCDB;
break;
case PXA_SSP_CLK_SCDB_4:
break;
-#if defined(CONFIG_PXA3xx)
case PXA_SSP_CLK_SCDB_8:
- if (cpu_is_pxa3xx())
+ if (ssp->type == PXA3xx_SSP)
val |= SSACD_SCDX8;
else
return -EINVAL;
break;
-#endif
default:
return -EINVAL;
}
struct ssp_device *ssp = priv->ssp;
u32 ssacd = pxa_ssp_read_reg(ssp, SSACD) & ~0x70;
-#if defined(CONFIG_PXA3xx)
- if (cpu_is_pxa3xx())
+ if (ssp->type == PXA3xx_SSP)
pxa_ssp_write_reg(ssp, SSACDD, 0);
-#endif
switch (freq_out) {
case 5622000:
break;
default:
-#ifdef CONFIG_PXA3xx
/* PXA3xx has a clock ditherer which can be used to generate
* a wider range of frequencies - calculate a value for it.
*/
- if (cpu_is_pxa3xx()) {
+ if (ssp->type == PXA3xx_SSP) {
u32 val;
u64 tmp = 19968;
tmp *= 1000000;
val, freq_out);
break;
}
-#endif
return -EINVAL;
}
/* bit size */
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
-#ifdef CONFIG_PXA3xx
- if (cpu_is_pxa3xx())
+ if (ssp->type == PXA3xx_SSP)
sscr0 |= SSCR0_FPCKE;
-#endif
sscr0 |= SSCR0_DataSize(16);
break;
case SNDRV_PCM_FORMAT_S24_LE:
* trying and failing a lot; some of the registers
* needed for that mode are only available on PXA3xx.
*/
-
-#ifdef CONFIG_PXA3xx
- if (!cpu_is_pxa3xx())
+ if (ssp->type != PXA3xx_SSP)
return -EINVAL;
sspsp |= SSPSP_SFRMWDTH(width * 2);
sspsp |= SSPSP_EDMYSTOP(3);
sspsp |= SSPSP_DMYSTOP(3);
sspsp |= SSPSP_DMYSTRT(1);
-#else
- return -EINVAL;
-#endif
} else {
/* The frame width is the width the LRCLK is
* asserted for; the delay is expressed in
/* do we need to add this widget to the list ? */
if (list) {
int err;
- err = dapm_list_add_widget(list, path->sink);
+ err = dapm_list_add_widget(list, path->source);
if (err < 0) {
dev_err(widget->dapm->dev, "could not add widget %s\n",
widget->name);
if (stream == SNDRV_PCM_STREAM_PLAYBACK)
paths = is_connected_output_ep(dai->playback_widget, list);
else
- paths = is_connected_input_ep(dai->playback_widget, list);
+ paths = is_connected_input_ep(dai->capture_widget, list);
trace_snd_soc_dapm_connected(paths, stream);
dapm_clear_walk(&card->dapm);
for (i = 0; i < card->num_links; i++) {
be = &card->rtd[i];
+ if (!be->dai_link->no_pcm)
+ continue;
+
if (be->cpu_dai->playback_widget == widget ||
be->codec_dai->playback_widget == widget)
return be;
for (i = 0; i < card->num_links; i++) {
be = &card->rtd[i];
+ if (!be->dai_link->no_pcm)
+ continue;
+
if (be->cpu_dai->capture_widget == widget ||
be->codec_dai->capture_widget == widget)
return be;
MODULE_DESCRIPTION("Tegra30 AHUB driver");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:" DRV_NAME);
+MODULE_DEVICE_TABLE(of, tegra30_ahub_of_match);
return 0;
}
+static int tegra_wm8903_remove(struct snd_soc_card *card)
+{
+ struct snd_soc_pcm_runtime *rtd = &(card->rtd[0]);
+ struct snd_soc_dai *codec_dai = rtd->codec_dai;
+ struct snd_soc_codec *codec = codec_dai->codec;
+
+ wm8903_mic_detect(codec, NULL, 0, 0);
+
+ return 0;
+}
+
static struct snd_soc_dai_link tegra_wm8903_dai = {
.name = "WM8903",
.stream_name = "WM8903 PCM",
.dai_link = &tegra_wm8903_dai,
.num_links = 1,
+ .remove = tegra_wm8903_remove,
+
.controls = tegra_wm8903_controls,
.num_controls = ARRAY_SIZE(tegra_wm8903_controls),
.dapm_widgets = tegra_wm8903_dapm_widgets,
int ret;
u8 data;
struct usb_device *device = interface_to_usbdev(intf);
- const struct firmware *fw = 0;
+ const struct firmware *fw = NULL;
struct ihex_record *rec = kmalloc(sizeof(struct ihex_record),
GFP_KERNEL);
unsigned long unlink_mask; /* bitmask of unlinked urbs */
/* data and sync endpoints for this stream */
+ unsigned int ep_num; /* the endpoint number */
struct snd_usb_endpoint *data_endpoint;
struct snd_usb_endpoint *sync_endpoint;
unsigned long flags;
{
struct list_head *p;
struct snd_usb_endpoint *ep;
- int ret, is_playback = direction == SNDRV_PCM_STREAM_PLAYBACK;
+ int is_playback = direction == SNDRV_PCM_STREAM_PLAYBACK;
mutex_lock(&chip->mutex);
type == SND_USB_ENDPOINT_TYPE_DATA ? "data" : "sync",
ep_num);
- /* select the alt setting once so the endpoints become valid */
- ret = usb_set_interface(chip->dev, alts->desc.bInterfaceNumber,
- alts->desc.bAlternateSetting);
- if (ret < 0) {
- snd_printk(KERN_ERR "%s(): usb_set_interface() failed, ret = %d\n",
- __func__, ret);
- ep = NULL;
- goto __exit_unlock;
- }
-
ep = kzalloc(sizeof(*ep), GFP_KERNEL);
if (!ep)
goto __exit_unlock;
if (++ep->use_count != 1)
return 0;
- if (snd_BUG_ON(!test_bit(EP_FLAG_ACTIVATED, &ep->flags)))
- return -EINVAL;
-
/* just to be sure */
deactivate_urbs(ep, 0, 1);
wait_clear_urbs(ep);
if (snd_BUG_ON(ep->use_count == 0))
return;
- if (snd_BUG_ON(!test_bit(EP_FLAG_ACTIVATED, &ep->flags)))
- return;
-
if (--ep->use_count == 0) {
deactivate_urbs(ep, force, can_sleep);
ep->data_subs = NULL;
}
}
-/**
- * snd_usb_endpoint_activate: activate an snd_usb_endpoint
- *
- * @ep: the endpoint to activate
- *
- * If the endpoint is not currently in use, this functions will select the
- * correct alternate interface setting for the interface of this endpoint.
- *
- * In case of any active users, this functions does nothing.
- *
- * Returns an error if usb_set_interface() failed, 0 in all other
- * cases.
- */
-int snd_usb_endpoint_activate(struct snd_usb_endpoint *ep)
-{
- if (ep->use_count != 0)
- return 0;
-
- if (!ep->chip->shutdown &&
- !test_and_set_bit(EP_FLAG_ACTIVATED, &ep->flags)) {
- int ret;
-
- ret = usb_set_interface(ep->chip->dev, ep->iface, ep->alt_idx);
- if (ret < 0) {
- snd_printk(KERN_ERR "%s() usb_set_interface() failed, ret = %d\n",
- __func__, ret);
- clear_bit(EP_FLAG_ACTIVATED, &ep->flags);
- return ret;
- }
-
- return 0;
- }
-
- return -EBUSY;
-}
-
/**
* snd_usb_endpoint_deactivate: deactivate an snd_usb_endpoint
*
if (!ep)
return -EINVAL;
+ deactivate_urbs(ep, 1, 1);
+ wait_clear_urbs(ep);
+
if (ep->use_count != 0)
return 0;
- if (!ep->chip->shutdown &&
- test_and_clear_bit(EP_FLAG_ACTIVATED, &ep->flags)) {
- int ret;
-
- ret = usb_set_interface(ep->chip->dev, ep->iface, 0);
- if (ret < 0) {
- snd_printk(KERN_ERR "%s(): usb_set_interface() failed, ret = %d\n",
- __func__, ret);
- return ret;
- }
+ clear_bit(EP_FLAG_ACTIVATED, &ep->flags);
- return 0;
- }
-
- return -EBUSY;
+ return 0;
}
/**
.map = audigy2nx_map,
.selector_map = audigy2nx_selectors,
},
+ { /* Logitech, Inc. QuickCam Pro for Notebooks */
+ .id = USB_ID(0x046d, 0x0991),
+ .ignore_ctl_error = 1,
+ },
+ { /* Logitech, Inc. QuickCam E 3500 */
+ .id = USB_ID(0x046d, 0x09a4),
+ .ignore_ctl_error = 1,
+ },
{
/* Hercules DJ Console (Windows Edition) */
.id = USB_ID(0x06f8, 0xb000),
force, can_sleep, wait);
}
-static int activate_endpoints(struct snd_usb_substream *subs)
-{
- if (subs->sync_endpoint) {
- int ret;
-
- ret = snd_usb_endpoint_activate(subs->sync_endpoint);
- if (ret < 0)
- return ret;
- }
-
- return snd_usb_endpoint_activate(subs->data_endpoint);
-}
-
static int deactivate_endpoints(struct snd_usb_substream *subs)
{
int reta, retb;
if (fmt == subs->cur_audiofmt)
return 0;
+ /* close the old interface */
+ if (subs->interface >= 0 && subs->interface != fmt->iface) {
+ err = usb_set_interface(subs->dev, subs->interface, 0);
+ if (err < 0) {
+ snd_printk(KERN_ERR "%d:%d:%d: return to setting 0 failed (%d)\n",
+ dev->devnum, fmt->iface, fmt->altsetting, err);
+ return -EIO;
+ }
+ subs->interface = -1;
+ subs->altset_idx = 0;
+ }
+
+ /* set interface */
+ if (subs->interface != fmt->iface ||
+ subs->altset_idx != fmt->altset_idx) {
+ err = usb_set_interface(dev, fmt->iface, fmt->altsetting);
+ if (err < 0) {
+ snd_printk(KERN_ERR "%d:%d:%d: usb_set_interface failed (%d)\n",
+ dev->devnum, fmt->iface, fmt->altsetting, err);
+ return -EIO;
+ }
+ snd_printdd(KERN_INFO "setting usb interface %d:%d\n",
+ fmt->iface, fmt->altsetting);
+ subs->interface = fmt->iface;
+ subs->altset_idx = fmt->altset_idx;
+ }
+
subs->data_endpoint = snd_usb_add_endpoint(subs->stream->chip,
alts, fmt->endpoint, subs->direction,
SND_USB_ENDPOINT_TYPE_DATA);
(get_endpoint(alts, 1)->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE &&
get_endpoint(alts, 1)->bSynchAddress != 0 &&
!implicit_fb)) {
- snd_printk(KERN_ERR "%d:%d:%d : invalid synch pipe\n",
- dev->devnum, fmt->iface, fmt->altsetting);
+ snd_printk(KERN_ERR "%d:%d:%d : invalid sync pipe. bmAttributes %02x, bLength %d, bSynchAddress %02x\n",
+ dev->devnum, fmt->iface, fmt->altsetting,
+ get_endpoint(alts, 1)->bmAttributes,
+ get_endpoint(alts, 1)->bLength,
+ get_endpoint(alts, 1)->bSynchAddress);
return -EINVAL;
}
ep = get_endpoint(alts, 1)->bEndpointAddress;
- if (get_endpoint(alts, 0)->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE &&
+ if (!implicit_fb &&
+ get_endpoint(alts, 0)->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE &&
(( is_playback && ep != (unsigned int)(get_endpoint(alts, 0)->bSynchAddress | USB_DIR_IN)) ||
- (!is_playback && ep != (unsigned int)(get_endpoint(alts, 0)->bSynchAddress & ~USB_DIR_IN)) ||
- ( is_playback && !implicit_fb))) {
- snd_printk(KERN_ERR "%d:%d:%d : invalid synch pipe\n",
- dev->devnum, fmt->iface, fmt->altsetting);
+ (!is_playback && ep != (unsigned int)(get_endpoint(alts, 0)->bSynchAddress & ~USB_DIR_IN)))) {
+ snd_printk(KERN_ERR "%d:%d:%d : invalid sync pipe. is_playback %d, ep %02x, bSynchAddress %02x\n",
+ dev->devnum, fmt->iface, fmt->altsetting,
+ is_playback, ep, get_endpoint(alts, 0)->bSynchAddress);
return -EINVAL;
}
subs->data_endpoint->sync_master = subs->sync_endpoint;
}
- if ((err = snd_usb_init_pitch(subs->stream->chip, subs->interface, alts, fmt)) < 0)
+ if ((err = snd_usb_init_pitch(subs->stream->chip, fmt->iface, alts, fmt)) < 0)
return err;
subs->cur_audiofmt = fmt;
struct usb_interface *iface;
iface = usb_ifnum_to_if(subs->dev, fmt->iface);
alts = &iface->altsetting[fmt->altset_idx];
- ret = snd_usb_init_sample_rate(subs->stream->chip, subs->interface, alts, fmt, rate);
+ ret = snd_usb_init_sample_rate(subs->stream->chip, fmt->iface, alts, fmt, rate);
if (ret < 0)
return ret;
subs->cur_rate = rate;
mutex_lock(&subs->stream->chip->shutdown_mutex);
/* format changed */
stop_endpoints(subs, 0, 0, 0);
- deactivate_endpoints(subs);
-
- ret = activate_endpoints(subs);
- if (ret < 0)
- goto unlock;
-
ret = snd_usb_endpoint_set_params(subs->data_endpoint, hw_params, fmt,
subs->sync_endpoint);
if (ret < 0)
subs->period_bytes = 0;
mutex_lock(&subs->stream->chip->shutdown_mutex);
stop_endpoints(subs, 0, 1, 1);
+ deactivate_endpoints(subs);
mutex_unlock(&subs->stream->chip->shutdown_mutex);
return snd_pcm_lib_free_vmalloc_buffer(substream);
}
static int snd_usb_pcm_close(struct snd_pcm_substream *substream, int direction)
{
- int ret;
struct snd_usb_stream *as = snd_pcm_substream_chip(substream);
struct snd_usb_substream *subs = &as->substream[direction];
stop_endpoints(subs, 0, 0, 0);
- ret = deactivate_endpoints(subs);
+
+ if (!as->chip->shutdown && subs->interface >= 0) {
+ usb_set_interface(subs->dev, subs->interface, 0);
+ subs->interface = -1;
+ }
+
subs->pcm_substream = NULL;
snd_usb_autosuspend(subs->stream->chip);
- return ret;
+ return 0;
}
/* Since a URB can handle only a single linear buffer, we must use double
return -EINVAL;
}
-int snd_usb_substream_capture_trigger(struct snd_pcm_substream *substream, int cmd)
+static int snd_usb_substream_capture_trigger(struct snd_pcm_substream *substream,
+ int cmd)
{
int err;
struct snd_usb_substream *subs = substream->runtime->private_data;
}
}
},
+{
+ USB_DEVICE(0x0582, 0x014d),
+ .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+ /* .vendor_name = "BOSS", */
+ /* .product_name = "GT-100", */
+ .ifnum = QUIRK_ANY_INTERFACE,
+ .type = QUIRK_COMPOSITE,
+ .data = (const struct snd_usb_audio_quirk[]) {
+ {
+ .ifnum = 1,
+ .type = QUIRK_AUDIO_STANDARD_INTERFACE
+ },
+ {
+ .ifnum = 2,
+ .type = QUIRK_AUDIO_STANDARD_INTERFACE
+ },
+ {
+ .ifnum = 3,
+ .type = QUIRK_MIDI_FIXED_ENDPOINT,
+ .data = & (const struct snd_usb_midi_endpoint_info) {
+ .out_cables = 0x0001,
+ .in_cables = 0x0001
+ }
+ },
+ {
+ .ifnum = -1
+ }
+ }
+ }
+},
/* Guillemot devices */
{
subs->formats |= fp->formats;
subs->num_formats++;
subs->fmt_type = fp->fmt_type;
+ subs->ep_num = fp->endpoint;
}
/*
if (as->fmt_type != fp->fmt_type)
continue;
subs = &as->substream[stream];
- if (!subs->data_endpoint)
- continue;
- if (subs->data_endpoint->ep_num == fp->endpoint) {
+ if (subs->ep_num == fp->endpoint) {
list_add_tail(&fp->list, &subs->fmt_list);
subs->num_formats++;
subs->formats |= fp->formats;
if (as->fmt_type != fp->fmt_type)
continue;
subs = &as->substream[stream];
- if (subs->data_endpoint)
+ if (subs->ep_num)
continue;
err = snd_pcm_new_stream(as->pcm, stream, 1);
if (err < 0)
pfd.fd = fd;
while (1) {
+ struct sockaddr *addr_p = (struct sockaddr *) &addr;
+ socklen_t addr_l = sizeof(addr);
pfd.events = POLLIN;
pfd.revents = 0;
poll(&pfd, 1, -1);
- len = recv(fd, kvp_recv_buffer, sizeof(kvp_recv_buffer), 0);
+ len = recvfrom(fd, kvp_recv_buffer, sizeof(kvp_recv_buffer), 0,
+ addr_p, &addr_l);
- if (len < 0) {
- syslog(LOG_ERR, "recv failed; error:%d", len);
+ if (len < 0 || addr.nl_pid) {
+ syslog(LOG_ERR, "recvfrom failed; pid:%u error:%d %s",
+ addr.nl_pid, errno, strerror(errno));
close(fd);
return -1;
}
tools/perf
+tools/scripts
+tools/lib/traceevent
include/linux/const.h
include/linux/perf_event.h
include/linux/rbtree.h
if (symbol_conf.use_callchain) {
err = callchain_append(he->callchain,
- &evsel->hists.callchain_cursor,
+ &callchain_cursor,
sample->period);
if (err)
return err;
* so we don't allocated the extra space needed because the stdio
* code will not use it.
*/
- if (al->sym != NULL && use_browser > 0) {
+ if (he->ms.sym != NULL && use_browser > 0) {
struct annotation *notes = symbol__annotation(he->ms.sym);
assert(evsel != NULL);
return 0;
if (!evsel_list->nr_entries) {
- if (perf_evlist__add_attrs_array(evsel_list, default_attrs) < 0)
+ if (perf_evlist__add_default_attrs(evsel_list, default_attrs) < 0)
return -1;
}
return 0;
/* Append detailed run extra attributes: */
- if (perf_evlist__add_attrs_array(evsel_list, detailed_attrs) < 0)
+ if (perf_evlist__add_default_attrs(evsel_list, detailed_attrs) < 0)
return -1;
if (detailed_run < 2)
return 0;
/* Append very detailed run extra attributes: */
- if (perf_evlist__add_attrs_array(evsel_list, very_detailed_attrs) < 0)
+ if (perf_evlist__add_default_attrs(evsel_list, very_detailed_attrs) < 0)
return -1;
if (detailed_run < 3)
return 0;
/* Append very, very detailed run extra attributes: */
- return perf_evlist__add_attrs_array(evsel_list, very_very_detailed_attrs);
+ return perf_evlist__add_default_attrs(evsel_list, very_very_detailed_attrs);
}
int cmd_stat(int argc, const char **argv, const char *prefix __used)
fprintf(stderr, "cannot use both --output and --log-fd\n");
usage_with_options(stat_usage, options);
}
+
+ if (output_fd < 0) {
+ fprintf(stderr, "argument to --log-fd must be a > 0\n");
+ usage_with_options(stat_usage, options);
+ }
+
if (!output) {
struct timespec tm;
mode = append_file ? "a" : "w";
}
clock_gettime(CLOCK_REALTIME, &tm);
fprintf(output, "# started on %s\n", ctime(&tm.tv_sec));
- } else if (output_fd != 2) {
+ } else if (output_fd > 0) {
mode = append_file ? "a" : "w";
output = fdopen(output_fd, mode);
if (!output) {
}
if (symbol_conf.use_callchain) {
- err = callchain_append(he->callchain, &evsel->hists.callchain_cursor,
+ err = callchain_append(he->callchain, &callchain_cursor,
sample->period);
if (err)
return;
prctl. When a counter is disabled, it doesn't count or generate
events but does continue to exist and maintain its count value.
-An individual counter or counter group can be enabled with
+An individual counter can be enabled with
- ioctl(fd, PERF_EVENT_IOC_ENABLE);
+ ioctl(fd, PERF_EVENT_IOC_ENABLE, 0);
or disabled with
- ioctl(fd, PERF_EVENT_IOC_DISABLE);
+ ioctl(fd, PERF_EVENT_IOC_DISABLE, 0);
+For a counter group, pass PERF_IOC_FLAG_GROUP as the third argument.
Enabling or disabling the leader of a group enables or disables the
whole group; that is, while the group leader is disabled, none of the
counters in the group will count. Enabling or disabling a member of a
"q/ESC/CTRL+C Exit\n\n"
"-> Go to target\n"
"<- Exit\n"
- "h Cycle thru hottest instructions\n"
+ "H Cycle thru hottest instructions\n"
"j Toggle showing jump to target arrows\n"
"J Toggle showing number of jump sources on targets\n"
"n Search next string\n"
# First check if there is a .git to get the version from git describe
# otherwise try to get the version from the kernel makefile
if test -d ../../.git -o -f ../../.git &&
- VN=$(git describe --abbrev=4 HEAD 2>/dev/null) &&
+ VN=$(git describe --match 'v[0-9].[0-9]*' --abbrev=4 HEAD 2>/dev/null) &&
case "$VN" in
*$LF*) (exit 1) ;;
v[0-9]*)
#include "util.h"
#include "callchain.h"
+__thread struct callchain_cursor callchain_cursor;
+
bool ip_callchain__valid(struct ip_callchain *chain,
const union perf_event *event)
{
struct callchain_cursor_node *curr;
};
+extern __thread struct callchain_cursor callchain_cursor;
+
static inline void callchain_init(struct callchain_root *root)
{
INIT_LIST_HEAD(&root->node.siblings);
return -1;
}
+int __perf_evlist__add_default_attrs(struct perf_evlist *evlist,
+ struct perf_event_attr *attrs, size_t nr_attrs)
+{
+ size_t i;
+
+ for (i = 0; i < nr_attrs; i++)
+ event_attr_init(attrs + i);
+
+ return perf_evlist__add_attrs(evlist, attrs, nr_attrs);
+}
+
static int trace_event__id(const char *evname)
{
char *filename, *colon;
for (cpu = 0; cpu < evlist->cpus->nr; cpu++) {
list_for_each_entry(pos, &evlist->entries, node) {
for (thread = 0; thread < evlist->threads->nr; thread++)
- ioctl(FD(pos, cpu, thread), PERF_EVENT_IOC_DISABLE);
+ ioctl(FD(pos, cpu, thread),
+ PERF_EVENT_IOC_DISABLE, 0);
}
}
}
for (cpu = 0; cpu < evlist->cpus->nr; cpu++) {
list_for_each_entry(pos, &evlist->entries, node) {
for (thread = 0; thread < evlist->threads->nr; thread++)
- ioctl(FD(pos, cpu, thread), PERF_EVENT_IOC_ENABLE);
+ ioctl(FD(pos, cpu, thread),
+ PERF_EVENT_IOC_ENABLE, 0);
}
}
}
int perf_evlist__add_default(struct perf_evlist *evlist);
int perf_evlist__add_attrs(struct perf_evlist *evlist,
struct perf_event_attr *attrs, size_t nr_attrs);
+int __perf_evlist__add_default_attrs(struct perf_evlist *evlist,
+ struct perf_event_attr *attrs, size_t nr_attrs);
int perf_evlist__add_tracepoints(struct perf_evlist *evlist,
const char *tracepoints[], size_t nr_tracepoints);
int perf_evlist__set_tracepoints_handlers(struct perf_evlist *evlist,
#define perf_evlist__add_attrs_array(evlist, array) \
perf_evlist__add_attrs(evlist, array, ARRAY_SIZE(array))
+#define perf_evlist__add_default_attrs(evlist, array) \
+ __perf_evlist__add_default_attrs(evlist, array, ARRAY_SIZE(array))
#define perf_evlist__add_tracepoints_array(evlist, array) \
perf_evlist__add_tracepoints(evlist, array, ARRAY_SIZE(array))
}
static int perf_event__parse_id_sample(const union perf_event *event, u64 type,
- struct perf_sample *sample)
+ struct perf_sample *sample,
+ bool swapped)
{
const u64 *array = event->sample.array;
+ union u64_swap u;
array += ((event->header.size -
sizeof(event->header)) / sizeof(u64)) - 1;
if (type & PERF_SAMPLE_CPU) {
- u32 *p = (u32 *)array;
- sample->cpu = *p;
+ u.val64 = *array;
+ if (swapped) {
+ /* undo swap of u64, then swap on individual u32s */
+ u.val64 = bswap_64(u.val64);
+ u.val32[0] = bswap_32(u.val32[0]);
+ }
+
+ sample->cpu = u.val32[0];
array--;
}
}
if (type & PERF_SAMPLE_TID) {
- u32 *p = (u32 *)array;
- sample->pid = p[0];
- sample->tid = p[1];
+ u.val64 = *array;
+ if (swapped) {
+ /* undo swap of u64, then swap on individual u32s */
+ u.val64 = bswap_64(u.val64);
+ u.val32[0] = bswap_32(u.val32[0]);
+ u.val32[1] = bswap_32(u.val32[1]);
+ }
+
+ sample->pid = u.val32[0];
+ sample->tid = u.val32[1];
}
return 0;
if (event->header.type != PERF_RECORD_SAMPLE) {
if (!sample_id_all)
return 0;
- return perf_event__parse_id_sample(event, type, data);
+ return perf_event__parse_id_sample(event, type, data, swapped);
}
array = event->sample.array;
else
return -1;
} else if (ph->needs_swap) {
- unsigned int i;
/*
* feature bitmap is declared as an array of unsigned longs --
* not good since its size can differ between the host that
* file), punt and fallback to the original behavior --
* clearing all feature bits and setting buildid.
*/
- for (i = 0; i < BITS_TO_LONGS(HEADER_FEAT_BITS); ++i)
- header->adds_features[i] = bswap_64(header->adds_features[i]);
+ mem_bswap_64(&header->adds_features,
+ BITS_TO_U64(HEADER_FEAT_BITS));
if (!test_bit(HEADER_HOSTNAME, header->adds_features)) {
- for (i = 0; i < BITS_TO_LONGS(HEADER_FEAT_BITS); ++i) {
- header->adds_features[i] = bswap_64(header->adds_features[i]);
- header->adds_features[i] = bswap_32(header->adds_features[i]);
- }
+ /* unswap as u64 */
+ mem_bswap_64(&header->adds_features,
+ BITS_TO_U64(HEADER_FEAT_BITS));
+
+ /* unswap as u32 */
+ mem_bswap_32(&header->adds_features,
+ BITS_TO_U32(HEADER_FEAT_BITS));
}
if (!test_bit(HEADER_HOSTNAME, header->adds_features)) {
return ret <= 0 ? -1 : 0;
}
+static int perf_evsel__set_tracepoint_name(struct perf_evsel *evsel)
+{
+ struct event_format *event = trace_find_event(evsel->attr.config);
+ char bf[128];
+
+ if (event == NULL)
+ return -1;
+
+ snprintf(bf, sizeof(bf), "%s:%s", event->system, event->name);
+ evsel->name = strdup(bf);
+ if (event->name == NULL)
+ return -1;
+
+ return 0;
+}
+
+static int perf_evlist__set_tracepoint_names(struct perf_evlist *evlist)
+{
+ struct perf_evsel *pos;
+
+ list_for_each_entry(pos, &evlist->entries, node) {
+ if (pos->attr.type == PERF_TYPE_TRACEPOINT &&
+ perf_evsel__set_tracepoint_name(pos))
+ return -1;
+ }
+
+ return 0;
+}
+
int perf_session__read_header(struct perf_session *session, int fd)
{
struct perf_header *header = &session->header;
lseek(fd, header->data_offset, SEEK_SET);
+ if (perf_evlist__set_tracepoint_names(session->evlist))
+ goto out_delete_evlist;
+
header->frozen = 1;
return 0;
out_errno:
* collapse the histogram
*/
-static bool hists__collapse_insert_entry(struct hists *hists,
+static bool hists__collapse_insert_entry(struct hists *hists __used,
struct rb_root *root,
struct hist_entry *he)
{
iter->period += he->period;
iter->nr_events += he->nr_events;
if (symbol_conf.use_callchain) {
- callchain_cursor_reset(&hists->callchain_cursor);
- callchain_merge(&hists->callchain_cursor, iter->callchain,
+ callchain_cursor_reset(&callchain_cursor);
+ callchain_merge(&callchain_cursor,
+ iter->callchain,
he->callchain);
}
hist_entry__free(he);
struct events_stats stats;
u64 event_stream;
u16 col_len[HISTC_NR_COLS];
- /* Best would be to reuse the session callchain cursor */
- struct callchain_cursor callchain_cursor;
};
struct hist_entry *__hists__add_entry(struct hists *self,
#define BITS_PER_LONG __WORDSIZE
#define BITS_PER_BYTE 8
#define BITS_TO_LONGS(nr) DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(long))
+#define BITS_TO_U64(nr) DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(u64))
+#define BITS_TO_U32(nr) DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(u32))
#define for_each_set_bit(bit, addr, size) \
for ((bit) = find_first_bit((addr), (size)); \
struct machine *machines__findnew(struct rb_root *self, pid_t pid)
{
char path[PATH_MAX];
- const char *root_dir;
+ const char *root_dir = "";
struct machine *machine = machines__find(self, pid);
- if (!machine || machine->pid != pid) {
- if (pid == HOST_KERNEL_ID || pid == DEFAULT_GUEST_KERNEL_ID)
- root_dir = "";
- else {
- if (!symbol_conf.guestmount)
- goto out;
- sprintf(path, "%s/%d", symbol_conf.guestmount, pid);
- if (access(path, R_OK)) {
- pr_err("Can't access file %s\n", path);
- goto out;
- }
- root_dir = path;
+ if (machine && (machine->pid == pid))
+ goto out;
+
+ if ((pid != HOST_KERNEL_ID) &&
+ (pid != DEFAULT_GUEST_KERNEL_ID) &&
+ (symbol_conf.guestmount)) {
+ sprintf(path, "%s/%d", symbol_conf.guestmount, pid);
+ if (access(path, R_OK)) {
+ pr_err("Can't access file %s\n", path);
+ machine = NULL;
+ goto out;
}
- machine = machines__add(self, pid, root_dir);
+ root_dir = path;
}
+ machine = machines__add(self, pid, root_dir);
+
out:
return machine;
}
}
if (!pager)
pager = getenv("PAGER");
+ if (!pager) {
+ if (!access("/usr/bin/pager", X_OK))
+ pager = "/usr/bin/pager";
+ }
if (!pager)
pager = "less";
else if (!*pager || !strcmp(pager, "cat"))
error:
if (kfd >= 0) {
- if (namelist)
- strlist__delete(namelist);
-
+ strlist__delete(namelist);
close(kfd);
}
if (ufd >= 0) {
- if (unamelist)
- strlist__delete(unamelist);
-
+ strlist__delete(unamelist);
close(ufd);
}
return bi;
}
-int machine__resolve_callchain(struct machine *self, struct perf_evsel *evsel,
+int machine__resolve_callchain(struct machine *self,
+ struct perf_evsel *evsel __used,
struct thread *thread,
struct ip_callchain *chain,
struct symbol **parent)
unsigned int i;
int err;
- callchain_cursor_reset(&evsel->hists.callchain_cursor);
+ callchain_cursor_reset(&callchain_cursor);
+
+ if (chain->nr > PERF_MAX_STACK_DEPTH) {
+ pr_warning("corrupted callchain. skipping...\n");
+ return 0;
+ }
for (i = 0; i < chain->nr; i++) {
u64 ip;
case PERF_CONTEXT_USER:
cpumode = PERF_RECORD_MISC_USER; break;
default:
- break;
+ pr_debug("invalid callchain context: "
+ "%"PRId64"\n", (s64) ip);
+ /*
+ * It seems the callchain is corrupted.
+ * Discard all.
+ */
+ callchain_cursor_reset(&callchain_cursor);
+ return 0;
}
continue;
}
break;
}
- err = callchain_cursor_append(&evsel->hists.callchain_cursor,
+ err = callchain_cursor_append(&callchain_cursor,
ip, al.map, al.sym);
if (err)
return err;
tool->finished_round = process_finished_round_stub;
}
}
+
+void mem_bswap_32(void *src, int byte_size)
+{
+ u32 *m = src;
+ while (byte_size > 0) {
+ *m = bswap_32(*m);
+ byte_size -= sizeof(u32);
+ ++m;
+ }
+}
void mem_bswap_64(void *src, int byte_size)
{
}
}
-static void perf_event__all64_swap(union perf_event *event)
+static void swap_sample_id_all(union perf_event *event, void *data)
+{
+ void *end = (void *) event + event->header.size;
+ int size = end - data;
+
+ BUG_ON(size % sizeof(u64));
+ mem_bswap_64(data, size);
+}
+
+static void perf_event__all64_swap(union perf_event *event,
+ bool sample_id_all __used)
{
struct perf_event_header *hdr = &event->header;
mem_bswap_64(hdr + 1, event->header.size - sizeof(*hdr));
}
-static void perf_event__comm_swap(union perf_event *event)
+static void perf_event__comm_swap(union perf_event *event, bool sample_id_all)
{
event->comm.pid = bswap_32(event->comm.pid);
event->comm.tid = bswap_32(event->comm.tid);
+
+ if (sample_id_all) {
+ void *data = &event->comm.comm;
+
+ data += ALIGN(strlen(data) + 1, sizeof(u64));
+ swap_sample_id_all(event, data);
+ }
}
-static void perf_event__mmap_swap(union perf_event *event)
+static void perf_event__mmap_swap(union perf_event *event,
+ bool sample_id_all)
{
event->mmap.pid = bswap_32(event->mmap.pid);
event->mmap.tid = bswap_32(event->mmap.tid);
event->mmap.start = bswap_64(event->mmap.start);
event->mmap.len = bswap_64(event->mmap.len);
event->mmap.pgoff = bswap_64(event->mmap.pgoff);
+
+ if (sample_id_all) {
+ void *data = &event->mmap.filename;
+
+ data += ALIGN(strlen(data) + 1, sizeof(u64));
+ swap_sample_id_all(event, data);
+ }
}
-static void perf_event__task_swap(union perf_event *event)
+static void perf_event__task_swap(union perf_event *event, bool sample_id_all)
{
event->fork.pid = bswap_32(event->fork.pid);
event->fork.tid = bswap_32(event->fork.tid);
event->fork.ppid = bswap_32(event->fork.ppid);
event->fork.ptid = bswap_32(event->fork.ptid);
event->fork.time = bswap_64(event->fork.time);
+
+ if (sample_id_all)
+ swap_sample_id_all(event, &event->fork + 1);
}
-static void perf_event__read_swap(union perf_event *event)
+static void perf_event__read_swap(union perf_event *event, bool sample_id_all)
{
event->read.pid = bswap_32(event->read.pid);
event->read.tid = bswap_32(event->read.tid);
event->read.time_enabled = bswap_64(event->read.time_enabled);
event->read.time_running = bswap_64(event->read.time_running);
event->read.id = bswap_64(event->read.id);
+
+ if (sample_id_all)
+ swap_sample_id_all(event, &event->read + 1);
}
static u8 revbyte(u8 b)
swap_bitfield((u8 *) (&attr->read_format + 1), sizeof(u64));
}
-static void perf_event__hdr_attr_swap(union perf_event *event)
+static void perf_event__hdr_attr_swap(union perf_event *event,
+ bool sample_id_all __used)
{
size_t size;
mem_bswap_64(event->attr.id, size);
}
-static void perf_event__event_type_swap(union perf_event *event)
+static void perf_event__event_type_swap(union perf_event *event,
+ bool sample_id_all __used)
{
event->event_type.event_type.event_id =
bswap_64(event->event_type.event_type.event_id);
}
-static void perf_event__tracing_data_swap(union perf_event *event)
+static void perf_event__tracing_data_swap(union perf_event *event,
+ bool sample_id_all __used)
{
event->tracing_data.size = bswap_32(event->tracing_data.size);
}
-typedef void (*perf_event__swap_op)(union perf_event *event);
+typedef void (*perf_event__swap_op)(union perf_event *event,
+ bool sample_id_all);
static perf_event__swap_op perf_event__swap_ops[] = {
[PERF_RECORD_MMAP] = perf_event__mmap_swap,
else
pid = event->ip.pid;
- return perf_session__find_machine(session, pid);
+ return perf_session__findnew_machine(session, pid);
}
return perf_session__find_host_machine(session);
}
}
+static void event_swap(union perf_event *event, bool sample_id_all)
+{
+ perf_event__swap_op swap;
+
+ swap = perf_event__swap_ops[event->header.type];
+ if (swap)
+ swap(event, sample_id_all);
+}
+
static int perf_session__process_event(struct perf_session *session,
union perf_event *event,
struct perf_tool *tool,
struct perf_sample sample;
int ret;
- if (session->header.needs_swap &&
- perf_event__swap_ops[event->header.type])
- perf_event__swap_ops[event->header.type](event);
+ if (session->header.needs_swap)
+ event_swap(event, session->sample_id_all);
if (event->header.type >= PERF_RECORD_HEADER_MAX)
return -EINVAL;
int print_sym, int print_dso, int print_symoffset)
{
struct addr_location al;
- struct callchain_cursor *cursor = &evsel->hists.callchain_cursor;
struct callchain_cursor_node *node;
if (perf_event__preprocess_sample(event, machine, &al, sample,
error("Failed to resolve callchain. Skipping\n");
return;
}
- callchain_cursor_commit(cursor);
+ callchain_cursor_commit(&callchain_cursor);
while (1) {
- node = callchain_cursor_current(cursor);
+ node = callchain_cursor_current(&callchain_cursor);
if (!node)
break;
}
if (print_dso) {
printf(" (");
- map__fprintf_dsoname(al.map, stdout);
+ map__fprintf_dsoname(node->map, stdout);
printf(")");
}
printf("\n");
- callchain_cursor_advance(cursor);
+ callchain_cursor_advance(&callchain_cursor);
}
} else {
bool perf_session__has_traces(struct perf_session *self, const char *msg);
void mem_bswap_64(void *src, int byte_size);
+void mem_bswap_32(void *src, int byte_size);
void perf_event__attr_swap(struct perf_event_attr *attr);
int perf_session__create_kernel_maps(struct perf_session *self);
dso->sorted_by_name = 0;
dso->has_build_id = 0;
dso->kernel = DSO_TYPE_USER;
+ dso->needs_swap = DSO_SWAP__UNSET;
INIT_LIST_HEAD(&dso->node);
}
return -1;
}
+static int dso__swap_init(struct dso *dso, unsigned char eidata)
+{
+ static unsigned int const endian = 1;
+
+ dso->needs_swap = DSO_SWAP__NO;
+
+ switch (eidata) {
+ case ELFDATA2LSB:
+ /* We are big endian, DSO is little endian. */
+ if (*(unsigned char const *)&endian != 1)
+ dso->needs_swap = DSO_SWAP__YES;
+ break;
+
+ case ELFDATA2MSB:
+ /* We are little endian, DSO is big endian. */
+ if (*(unsigned char const *)&endian != 0)
+ dso->needs_swap = DSO_SWAP__YES;
+ break;
+
+ default:
+ pr_err("unrecognized DSO data encoding %d\n", eidata);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static int dso__load_sym(struct dso *dso, struct map *map, const char *name,
int fd, symbol_filter_t filter, int kmodule,
int want_symtab)
goto out_elf_end;
}
+ if (dso__swap_init(dso, ehdr.e_ident[EI_DATA]))
+ goto out_elf_end;
+
/* Always reject images with a mismatched build-id: */
if (dso->has_build_id) {
u8 build_id[BUILD_ID_SIZE];
if (opdsec && sym.st_shndx == opdidx) {
u32 offset = sym.st_value - opdshdr.sh_addr;
u64 *opd = opddata->d_buf + offset;
- sym.st_value = *opd;
+ sym.st_value = DSO__SWAP(dso, u64, *opd);
sym.st_shndx = elf_addr_to_index(elf, sym.st_value);
}
struct map *dso__new_map(const char *name)
{
+ struct map *map = NULL;
struct dso *dso = dso__new(name);
- struct map *map = map__new2(0, dso, MAP__FUNCTION);
+
+ if (dso)
+ map = map__new2(0, dso, MAP__FUNCTION);
return map;
}
#include <linux/list.h>
#include <linux/rbtree.h>
#include <stdio.h>
+#include <byteswap.h>
#ifdef HAVE_CPLUS_DEMANGLE
extern char *cplus_demangle(const char *, int);
DSO_TYPE_GUEST_KERNEL
};
+enum dso_swap_type {
+ DSO_SWAP__UNSET,
+ DSO_SWAP__NO,
+ DSO_SWAP__YES,
+};
+
struct dso {
struct list_head node;
struct rb_root symbols[MAP__NR_TYPES];
struct rb_root symbol_names[MAP__NR_TYPES];
enum dso_kernel_type kernel;
+ enum dso_swap_type needs_swap;
u8 adjust_symbols:1;
u8 has_build_id:1;
u8 hit:1;
char name[0];
};
+#define DSO__SWAP(dso, type, val) \
+({ \
+ type ____r = val; \
+ BUG_ON(dso->needs_swap == DSO_SWAP__UNSET); \
+ if (dso->needs_swap == DSO_SWAP__YES) { \
+ switch (sizeof(____r)) { \
+ case 2: \
+ ____r = bswap_16(val); \
+ break; \
+ case 4: \
+ ____r = bswap_32(val); \
+ break; \
+ case 8: \
+ ____r = bswap_64(val); \
+ break; \
+ default: \
+ BUG_ON(1); \
+ } \
+ } \
+ ____r; \
+})
+
struct dso *dso__new(const char *name);
void dso__delete(struct dso *dso);
record.data = data;
trace_seq_init(&s);
- pevent_print_event(pevent, &s, &record);
+ pevent_event_info(&s, event, &record);
trace_seq_do_printf(&s);
- printf("\n");
}
void print_event(int cpu, void *data, int size, unsigned long long nsecs,
turbostat : turbostat.c
+CFLAGS += -Wall
clean :
rm -f turbostat
on processors that additionally support C-state residency counters.
.SS Options
-The \fB-s\fP option prints only a 1-line summary for each sample interval.
+The \fB-s\fP option limits output to a 1-line system summary for each interval.
+.PP
+The \fB-c\fP option limits output to the 1st thread in each core.
+.PP
+The \fB-p\fP option limits output to the 1st thread in each package.
.PP
The \fB-v\fP option increases verbosity.
.PP
.nf
[root@x980]# ./turbostat
cor CPU %c0 GHz TSC %c1 %c3 %c6 %pc3 %pc6
- 0.60 1.63 3.38 2.91 0.00 96.49 0.00 76.64
- 0 0 0.59 1.62 3.38 4.51 0.00 94.90 0.00 76.64
- 0 6 1.13 1.64 3.38 3.97 0.00 94.90 0.00 76.64
- 1 2 0.08 1.62 3.38 0.07 0.00 99.85 0.00 76.64
- 1 8 0.03 1.62 3.38 0.12 0.00 99.85 0.00 76.64
- 2 4 0.01 1.62 3.38 0.06 0.00 99.93 0.00 76.64
- 2 10 0.04 1.62 3.38 0.02 0.00 99.93 0.00 76.64
- 8 1 2.85 1.62 3.38 11.71 0.00 85.44 0.00 76.64
- 8 7 1.98 1.62 3.38 12.58 0.00 85.44 0.00 76.64
- 9 3 0.36 1.62 3.38 0.71 0.00 98.93 0.00 76.64
- 9 9 0.09 1.62 3.38 0.98 0.00 98.93 0.00 76.64
- 10 5 0.03 1.62 3.38 0.09 0.00 99.87 0.00 76.64
- 10 11 0.07 1.62 3.38 0.06 0.00 99.87 0.00 76.64
+ 0.09 1.62 3.38 1.83 0.32 97.76 1.26 83.61
+ 0 0 0.15 1.62 3.38 10.23 0.05 89.56 1.26 83.61
+ 0 6 0.05 1.62 3.38 10.34
+ 1 2 0.03 1.62 3.38 0.07 0.05 99.86
+ 1 8 0.03 1.62 3.38 0.06
+ 2 4 0.21 1.62 3.38 0.10 1.49 98.21
+ 2 10 0.02 1.62 3.38 0.29
+ 8 1 0.04 1.62 3.38 0.04 0.08 99.84
+ 8 7 0.01 1.62 3.38 0.06
+ 9 3 0.53 1.62 3.38 0.10 0.20 99.17
+ 9 9 0.02 1.62 3.38 0.60
+ 10 5 0.01 1.62 3.38 0.02 0.04 99.92
+ 10 11 0.02 1.62 3.38 0.02
.fi
.SH SUMMARY EXAMPLE
The "-s" option prints the column headers just once,
.nf
[root@x980]# ./turbostat -s
%c0 GHz TSC %c1 %c3 %c6 %pc3 %pc6
- 0.61 1.89 3.38 5.95 0.00 93.44 0.00 66.33
- 0.52 1.62 3.38 6.83 0.00 92.65 0.00 61.11
- 0.62 1.92 3.38 5.47 0.00 93.91 0.00 67.31
+ 0.23 1.67 3.38 2.00 0.30 97.47 1.07 82.12
+ 0.10 1.62 3.38 1.87 2.25 95.77 12.02 72.60
+ 0.20 1.64 3.38 1.98 0.11 97.72 0.30 83.36
+ 0.11 1.70 3.38 1.86 1.81 96.22 9.71 74.90
.fi
.SH VERBOSE EXAMPLE
The "-v" option adds verbosity to the output:
[root@x980 lenb]# ./turbostat cat /dev/zero > /dev/null
^C
cor CPU %c0 GHz TSC %c1 %c3 %c6 %pc3 %pc6
- 8.63 3.64 3.38 14.46 0.49 76.42 0.00 0.00
- 0 0 0.34 3.36 3.38 99.66 0.00 0.00 0.00 0.00
- 0 6 99.96 3.64 3.38 0.04 0.00 0.00 0.00 0.00
- 1 2 0.14 3.50 3.38 1.75 2.04 96.07 0.00 0.00
- 1 8 0.38 3.57 3.38 1.51 2.04 96.07 0.00 0.00
- 2 4 0.01 2.65 3.38 0.06 0.00 99.93 0.00 0.00
- 2 10 0.03 2.12 3.38 0.04 0.00 99.93 0.00 0.00
- 8 1 0.91 3.59 3.38 35.27 0.92 62.90 0.00 0.00
- 8 7 1.61 3.63 3.38 34.57 0.92 62.90 0.00 0.00
- 9 3 0.04 3.38 3.38 0.20 0.00 99.76 0.00 0.00
- 9 9 0.04 3.29 3.38 0.20 0.00 99.76 0.00 0.00
- 10 5 0.03 3.08 3.38 0.12 0.00 99.85 0.00 0.00
- 10 11 0.05 3.07 3.38 0.10 0.00 99.85 0.00 0.00
-4.907015 sec
-
+ 8.86 3.61 3.38 15.06 31.19 44.89 0.00 0.00
+ 0 0 1.46 3.22 3.38 16.84 29.48 52.22 0.00 0.00
+ 0 6 0.21 3.06 3.38 18.09
+ 1 2 0.53 3.33 3.38 2.80 46.40 50.27
+ 1 8 0.89 3.47 3.38 2.44
+ 2 4 1.36 3.43 3.38 9.04 23.71 65.89
+ 2 10 0.18 2.86 3.38 10.22
+ 8 1 0.04 2.87 3.38 99.96 0.01 0.00
+ 8 7 99.72 3.63 3.38 0.27
+ 9 3 0.31 3.21 3.38 7.64 56.55 35.50
+ 9 9 0.08 2.95 3.38 7.88
+ 10 5 1.42 3.43 3.38 2.14 30.99 65.44
+ 10 11 0.16 2.88 3.38 3.40
.fi
-Above the cycle soaker drives cpu6 up 3.6 Ghz turbo limit
+Above the cycle soaker drives cpu7 up its 3.6 Ghz turbo limit
while the other processors are generally in various states of idle.
-Note that cpu0 is an HT sibling sharing core0
-with cpu6, and thus it is unable to get to an idle state
-deeper than c1 while cpu6 is busy.
+Note that cpu1 and cpu7 are HT siblings within core8.
+As cpu7 is very busy, it prevents its sibling, cpu1,
+from entering a c-state deeper than c1.
-Note that turbostat reports average GHz of 3.64, while
+Note that turbostat reports average GHz of 3.63, while
the arithmetic average of the GHz column above is lower.
This is a weighted average, where the weight is %c0. ie. it is the total number of
un-halted cycles elapsed per time divided by the number of CPUs.
unsigned int show_pkg;
unsigned int show_core;
unsigned int show_cpu;
+unsigned int show_pkg_only;
+unsigned int show_core_only;
+char *output_buffer, *outp;
int aperf_mperf_unstable;
int backwards_count;
char *progname;
-int num_cpus;
-cpu_set_t *cpu_mask;
-size_t cpu_mask_size;
-
-struct counters {
- unsigned long long tsc; /* per thread */
- unsigned long long aperf; /* per thread */
- unsigned long long mperf; /* per thread */
- unsigned long long c1; /* per thread (calculated) */
- unsigned long long c3; /* per core */
- unsigned long long c6; /* per core */
- unsigned long long c7; /* per core */
- unsigned long long pc2; /* per package */
- unsigned long long pc3; /* per package */
- unsigned long long pc6; /* per package */
- unsigned long long pc7; /* per package */
- unsigned long long extra_msr; /* per thread */
- int pkg;
- int core;
- int cpu;
- struct counters *next;
-};
-
-struct counters *cnt_even;
-struct counters *cnt_odd;
-struct counters *cnt_delta;
-struct counters *cnt_average;
-struct timeval tv_even;
-struct timeval tv_odd;
-struct timeval tv_delta;
-
-/*
- * cpu_mask_init(ncpus)
- *
- * allocate and clear cpu_mask
- * set cpu_mask_size
- */
-void cpu_mask_init(int ncpus)
+cpu_set_t *cpu_present_set, *cpu_affinity_set;
+size_t cpu_present_setsize, cpu_affinity_setsize;
+
+struct thread_data {
+ unsigned long long tsc;
+ unsigned long long aperf;
+ unsigned long long mperf;
+ unsigned long long c1; /* derived */
+ unsigned long long extra_msr;
+ unsigned int cpu_id;
+ unsigned int flags;
+#define CPU_IS_FIRST_THREAD_IN_CORE 0x2
+#define CPU_IS_FIRST_CORE_IN_PACKAGE 0x4
+} *thread_even, *thread_odd;
+
+struct core_data {
+ unsigned long long c3;
+ unsigned long long c6;
+ unsigned long long c7;
+ unsigned int core_id;
+} *core_even, *core_odd;
+
+struct pkg_data {
+ unsigned long long pc2;
+ unsigned long long pc3;
+ unsigned long long pc6;
+ unsigned long long pc7;
+ unsigned int package_id;
+} *package_even, *package_odd;
+
+#define ODD_COUNTERS thread_odd, core_odd, package_odd
+#define EVEN_COUNTERS thread_even, core_even, package_even
+
+#define GET_THREAD(thread_base, thread_no, core_no, pkg_no) \
+ (thread_base + (pkg_no) * topo.num_cores_per_pkg * \
+ topo.num_threads_per_core + \
+ (core_no) * topo.num_threads_per_core + (thread_no))
+#define GET_CORE(core_base, core_no, pkg_no) \
+ (core_base + (pkg_no) * topo.num_cores_per_pkg + (core_no))
+#define GET_PKG(pkg_base, pkg_no) (pkg_base + pkg_no)
+
+struct system_summary {
+ struct thread_data threads;
+ struct core_data cores;
+ struct pkg_data packages;
+} sum, average;
+
+
+struct topo_params {
+ int num_packages;
+ int num_cpus;
+ int num_cores;
+ int max_cpu_num;
+ int num_cores_per_pkg;
+ int num_threads_per_core;
+} topo;
+
+struct timeval tv_even, tv_odd, tv_delta;
+
+void setup_all_buffers(void);
+
+int cpu_is_not_present(int cpu)
{
- cpu_mask = CPU_ALLOC(ncpus);
- if (cpu_mask == NULL) {
- perror("CPU_ALLOC");
- exit(3);
- }
- cpu_mask_size = CPU_ALLOC_SIZE(ncpus);
- CPU_ZERO_S(cpu_mask_size, cpu_mask);
+ return !CPU_ISSET_S(cpu, cpu_present_setsize, cpu_present_set);
}
+/*
+ * run func(thread, core, package) in topology order
+ * skip non-present cpus
+ */
-void cpu_mask_uninit()
+int for_all_cpus(int (func)(struct thread_data *, struct core_data *, struct pkg_data *),
+ struct thread_data *thread_base, struct core_data *core_base, struct pkg_data *pkg_base)
{
- CPU_FREE(cpu_mask);
- cpu_mask = NULL;
- cpu_mask_size = 0;
+ int retval, pkg_no, core_no, thread_no;
+
+ for (pkg_no = 0; pkg_no < topo.num_packages; ++pkg_no) {
+ for (core_no = 0; core_no < topo.num_cores_per_pkg; ++core_no) {
+ for (thread_no = 0; thread_no <
+ topo.num_threads_per_core; ++thread_no) {
+ struct thread_data *t;
+ struct core_data *c;
+ struct pkg_data *p;
+
+ t = GET_THREAD(thread_base, thread_no, core_no, pkg_no);
+
+ if (cpu_is_not_present(t->cpu_id))
+ continue;
+
+ c = GET_CORE(core_base, core_no, pkg_no);
+ p = GET_PKG(pkg_base, pkg_no);
+
+ retval = func(t, c, p);
+ if (retval)
+ return retval;
+ }
+ }
+ }
+ return 0;
}
int cpu_migrate(int cpu)
{
- CPU_ZERO_S(cpu_mask_size, cpu_mask);
- CPU_SET_S(cpu, cpu_mask_size, cpu_mask);
- if (sched_setaffinity(0, cpu_mask_size, cpu_mask) == -1)
+ CPU_ZERO_S(cpu_affinity_setsize, cpu_affinity_set);
+ CPU_SET_S(cpu, cpu_affinity_setsize, cpu_affinity_set);
+ if (sched_setaffinity(0, cpu_affinity_setsize, cpu_affinity_set) == -1)
return -1;
else
return 0;
void print_header(void)
{
if (show_pkg)
- fprintf(stderr, "pk");
+ outp += sprintf(outp, "pk");
if (show_pkg)
- fprintf(stderr, " ");
+ outp += sprintf(outp, " ");
if (show_core)
- fprintf(stderr, "cor");
+ outp += sprintf(outp, "cor");
if (show_cpu)
- fprintf(stderr, " CPU");
+ outp += sprintf(outp, " CPU");
if (show_pkg || show_core || show_cpu)
- fprintf(stderr, " ");
+ outp += sprintf(outp, " ");
if (do_nhm_cstates)
- fprintf(stderr, " %%c0");
+ outp += sprintf(outp, " %%c0");
if (has_aperf)
- fprintf(stderr, " GHz");
- fprintf(stderr, " TSC");
+ outp += sprintf(outp, " GHz");
+ outp += sprintf(outp, " TSC");
if (do_nhm_cstates)
- fprintf(stderr, " %%c1");
+ outp += sprintf(outp, " %%c1");
if (do_nhm_cstates)
- fprintf(stderr, " %%c3");
+ outp += sprintf(outp, " %%c3");
if (do_nhm_cstates)
- fprintf(stderr, " %%c6");
+ outp += sprintf(outp, " %%c6");
if (do_snb_cstates)
- fprintf(stderr, " %%c7");
+ outp += sprintf(outp, " %%c7");
if (do_snb_cstates)
- fprintf(stderr, " %%pc2");
+ outp += sprintf(outp, " %%pc2");
if (do_nhm_cstates)
- fprintf(stderr, " %%pc3");
+ outp += sprintf(outp, " %%pc3");
if (do_nhm_cstates)
- fprintf(stderr, " %%pc6");
+ outp += sprintf(outp, " %%pc6");
if (do_snb_cstates)
- fprintf(stderr, " %%pc7");
+ outp += sprintf(outp, " %%pc7");
if (extra_msr_offset)
- fprintf(stderr, " MSR 0x%x ", extra_msr_offset);
+ outp += sprintf(outp, " MSR 0x%x ", extra_msr_offset);
- putc('\n', stderr);
+ outp += sprintf(outp, "\n");
}
-void dump_cnt(struct counters *cnt)
+int dump_counters(struct thread_data *t, struct core_data *c,
+ struct pkg_data *p)
{
- if (!cnt)
- return;
- if (cnt->pkg) fprintf(stderr, "package: %d ", cnt->pkg);
- if (cnt->core) fprintf(stderr, "core:: %d ", cnt->core);
- if (cnt->cpu) fprintf(stderr, "CPU: %d ", cnt->cpu);
- if (cnt->tsc) fprintf(stderr, "TSC: %016llX\n", cnt->tsc);
- if (cnt->c3) fprintf(stderr, "c3: %016llX\n", cnt->c3);
- if (cnt->c6) fprintf(stderr, "c6: %016llX\n", cnt->c6);
- if (cnt->c7) fprintf(stderr, "c7: %016llX\n", cnt->c7);
- if (cnt->aperf) fprintf(stderr, "aperf: %016llX\n", cnt->aperf);
- if (cnt->pc2) fprintf(stderr, "pc2: %016llX\n", cnt->pc2);
- if (cnt->pc3) fprintf(stderr, "pc3: %016llX\n", cnt->pc3);
- if (cnt->pc6) fprintf(stderr, "pc6: %016llX\n", cnt->pc6);
- if (cnt->pc7) fprintf(stderr, "pc7: %016llX\n", cnt->pc7);
- if (cnt->extra_msr) fprintf(stderr, "msr0x%x: %016llX\n", extra_msr_offset, cnt->extra_msr);
-}
+ fprintf(stderr, "t %p, c %p, p %p\n", t, c, p);
+
+ if (t) {
+ fprintf(stderr, "CPU: %d flags 0x%x\n", t->cpu_id, t->flags);
+ fprintf(stderr, "TSC: %016llX\n", t->tsc);
+ fprintf(stderr, "aperf: %016llX\n", t->aperf);
+ fprintf(stderr, "mperf: %016llX\n", t->mperf);
+ fprintf(stderr, "c1: %016llX\n", t->c1);
+ fprintf(stderr, "msr0x%x: %016llX\n",
+ extra_msr_offset, t->extra_msr);
+ }
-void dump_list(struct counters *cnt)
-{
- printf("dump_list 0x%p\n", cnt);
+ if (c) {
+ fprintf(stderr, "core: %d\n", c->core_id);
+ fprintf(stderr, "c3: %016llX\n", c->c3);
+ fprintf(stderr, "c6: %016llX\n", c->c6);
+ fprintf(stderr, "c7: %016llX\n", c->c7);
+ }
- for (; cnt; cnt = cnt->next)
- dump_cnt(cnt);
+ if (p) {
+ fprintf(stderr, "package: %d\n", p->package_id);
+ fprintf(stderr, "pc2: %016llX\n", p->pc2);
+ fprintf(stderr, "pc3: %016llX\n", p->pc3);
+ fprintf(stderr, "pc6: %016llX\n", p->pc6);
+ fprintf(stderr, "pc7: %016llX\n", p->pc7);
+ }
+ return 0;
}
/*
* TSC: "TSC" 3 columns %3.2
* percentage " %pc3" %6.2
*/
-void print_cnt(struct counters *p)
+int format_counters(struct thread_data *t, struct core_data *c,
+ struct pkg_data *p)
{
double interval_float;
+ /* if showing only 1st thread in core and this isn't one, bail out */
+ if (show_core_only && !(t->flags & CPU_IS_FIRST_THREAD_IN_CORE))
+ return 0;
+
+ /* if showing only 1st thread in pkg and this isn't one, bail out */
+ if (show_pkg_only && !(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE))
+ return 0;
+
interval_float = tv_delta.tv_sec + tv_delta.tv_usec/1000000.0;
- /* topology columns, print blanks on 1st (average) line */
- if (p == cnt_average) {
+ /* topo columns, print blanks on 1st (average) line */
+ if (t == &average.threads) {
if (show_pkg)
- fprintf(stderr, " ");
+ outp += sprintf(outp, " ");
if (show_pkg && show_core)
- fprintf(stderr, " ");
+ outp += sprintf(outp, " ");
if (show_core)
- fprintf(stderr, " ");
+ outp += sprintf(outp, " ");
if (show_cpu)
- fprintf(stderr, " " " ");
+ outp += sprintf(outp, " " " ");
} else {
- if (show_pkg)
- fprintf(stderr, "%2d", p->pkg);
+ if (show_pkg) {
+ if (p)
+ outp += sprintf(outp, "%2d", p->package_id);
+ else
+ outp += sprintf(outp, " ");
+ }
if (show_pkg && show_core)
- fprintf(stderr, " ");
- if (show_core)
- fprintf(stderr, "%3d", p->core);
+ outp += sprintf(outp, " ");
+ if (show_core) {
+ if (c)
+ outp += sprintf(outp, "%3d", c->core_id);
+ else
+ outp += sprintf(outp, " ");
+ }
if (show_cpu)
- fprintf(stderr, " %3d", p->cpu);
+ outp += sprintf(outp, " %3d", t->cpu_id);
}
/* %c0 */
if (do_nhm_cstates) {
if (show_pkg || show_core || show_cpu)
- fprintf(stderr, " ");
+ outp += sprintf(outp, " ");
if (!skip_c0)
- fprintf(stderr, "%6.2f", 100.0 * p->mperf/p->tsc);
+ outp += sprintf(outp, "%6.2f", 100.0 * t->mperf/t->tsc);
else
- fprintf(stderr, " ****");
+ outp += sprintf(outp, " ****");
}
/* GHz */
if (has_aperf) {
if (!aperf_mperf_unstable) {
- fprintf(stderr, " %3.2f",
- 1.0 * p->tsc / units * p->aperf /
- p->mperf / interval_float);
+ outp += sprintf(outp, " %3.2f",
+ 1.0 * t->tsc / units * t->aperf /
+ t->mperf / interval_float);
} else {
- if (p->aperf > p->tsc || p->mperf > p->tsc) {
- fprintf(stderr, " ***");
+ if (t->aperf > t->tsc || t->mperf > t->tsc) {
+ outp += sprintf(outp, " ***");
} else {
- fprintf(stderr, "%3.1f*",
- 1.0 * p->tsc /
- units * p->aperf /
- p->mperf / interval_float);
+ outp += sprintf(outp, "%3.1f*",
+ 1.0 * t->tsc /
+ units * t->aperf /
+ t->mperf / interval_float);
}
}
}
/* TSC */
- fprintf(stderr, "%5.2f", 1.0 * p->tsc/units/interval_float);
+ outp += sprintf(outp, "%5.2f", 1.0 * t->tsc/units/interval_float);
if (do_nhm_cstates) {
if (!skip_c1)
- fprintf(stderr, " %6.2f", 100.0 * p->c1/p->tsc);
+ outp += sprintf(outp, " %6.2f", 100.0 * t->c1/t->tsc);
else
- fprintf(stderr, " ****");
+ outp += sprintf(outp, " ****");
}
+
+ /* print per-core data only for 1st thread in core */
+ if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE))
+ goto done;
+
if (do_nhm_cstates)
- fprintf(stderr, " %6.2f", 100.0 * p->c3/p->tsc);
+ outp += sprintf(outp, " %6.2f", 100.0 * c->c3/t->tsc);
if (do_nhm_cstates)
- fprintf(stderr, " %6.2f", 100.0 * p->c6/p->tsc);
+ outp += sprintf(outp, " %6.2f", 100.0 * c->c6/t->tsc);
if (do_snb_cstates)
- fprintf(stderr, " %6.2f", 100.0 * p->c7/p->tsc);
+ outp += sprintf(outp, " %6.2f", 100.0 * c->c7/t->tsc);
+
+ /* print per-package data only for 1st core in package */
+ if (!(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE))
+ goto done;
+
if (do_snb_cstates)
- fprintf(stderr, " %6.2f", 100.0 * p->pc2/p->tsc);
+ outp += sprintf(outp, " %6.2f", 100.0 * p->pc2/t->tsc);
if (do_nhm_cstates)
- fprintf(stderr, " %6.2f", 100.0 * p->pc3/p->tsc);
+ outp += sprintf(outp, " %6.2f", 100.0 * p->pc3/t->tsc);
if (do_nhm_cstates)
- fprintf(stderr, " %6.2f", 100.0 * p->pc6/p->tsc);
+ outp += sprintf(outp, " %6.2f", 100.0 * p->pc6/t->tsc);
if (do_snb_cstates)
- fprintf(stderr, " %6.2f", 100.0 * p->pc7/p->tsc);
+ outp += sprintf(outp, " %6.2f", 100.0 * p->pc7/t->tsc);
+done:
if (extra_msr_offset)
- fprintf(stderr, " 0x%016llx", p->extra_msr);
- putc('\n', stderr);
+ outp += sprintf(outp, " 0x%016llx", t->extra_msr);
+ outp += sprintf(outp, "\n");
+
+ return 0;
}
-void print_counters(struct counters *counters)
+void flush_stdout()
+{
+ fputs(output_buffer, stdout);
+ outp = output_buffer;
+}
+void flush_stderr()
+{
+ fputs(output_buffer, stderr);
+ outp = output_buffer;
+}
+void format_all_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p)
{
- struct counters *cnt;
static int printed;
-
if (!printed || !summary_only)
print_header();
- if (num_cpus > 1)
- print_cnt(cnt_average);
+ if (topo.num_cpus > 1)
+ format_counters(&average.threads, &average.cores,
+ &average.packages);
printed = 1;
if (summary_only)
return;
- for (cnt = counters; cnt != NULL; cnt = cnt->next)
- print_cnt(cnt);
-
+ for_all_cpus(format_counters, t, c, p);
}
-#define SUBTRACT_COUNTER(after, before, delta) (delta = (after - before), (before > after))
+void
+delta_package(struct pkg_data *new, struct pkg_data *old)
+{
+ old->pc2 = new->pc2 - old->pc2;
+ old->pc3 = new->pc3 - old->pc3;
+ old->pc6 = new->pc6 - old->pc6;
+ old->pc7 = new->pc7 - old->pc7;
+}
-int compute_delta(struct counters *after,
- struct counters *before, struct counters *delta)
+void
+delta_core(struct core_data *new, struct core_data *old)
{
- int errors = 0;
- int perf_err = 0;
+ old->c3 = new->c3 - old->c3;
+ old->c6 = new->c6 - old->c6;
+ old->c7 = new->c7 - old->c7;
+}
- skip_c0 = skip_c1 = 0;
+/*
+ * old = new - old
+ */
+void
+delta_thread(struct thread_data *new, struct thread_data *old,
+ struct core_data *core_delta)
+{
+ old->tsc = new->tsc - old->tsc;
+
+ /* check for TSC < 1 Mcycles over interval */
+ if (old->tsc < (1000 * 1000)) {
+ fprintf(stderr, "Insanely slow TSC rate, TSC stops in idle?\n");
+ fprintf(stderr, "You can disable all c-states by booting with \"idle=poll\"\n");
+ fprintf(stderr, "or just the deep ones with \"processor.max_cstate=1\"\n");
+ exit(-3);
+ }
- for ( ; after && before && delta;
- after = after->next, before = before->next, delta = delta->next) {
- if (before->cpu != after->cpu) {
- printf("cpu configuration changed: %d != %d\n",
- before->cpu, after->cpu);
- return -1;
- }
+ old->c1 = new->c1 - old->c1;
- if (SUBTRACT_COUNTER(after->tsc, before->tsc, delta->tsc)) {
- fprintf(stderr, "cpu%d TSC went backwards %llX to %llX\n",
- before->cpu, before->tsc, after->tsc);
- errors++;
- }
- /* check for TSC < 1 Mcycles over interval */
- if (delta->tsc < (1000 * 1000)) {
- fprintf(stderr, "Insanely slow TSC rate,"
- " TSC stops in idle?\n");
- fprintf(stderr, "You can disable all c-states"
- " by booting with \"idle=poll\"\n");
- fprintf(stderr, "or just the deep ones with"
- " \"processor.max_cstate=1\"\n");
- exit(-3);
- }
- if (SUBTRACT_COUNTER(after->c3, before->c3, delta->c3)) {
- fprintf(stderr, "cpu%d c3 counter went backwards %llX to %llX\n",
- before->cpu, before->c3, after->c3);
- errors++;
- }
- if (SUBTRACT_COUNTER(after->c6, before->c6, delta->c6)) {
- fprintf(stderr, "cpu%d c6 counter went backwards %llX to %llX\n",
- before->cpu, before->c6, after->c6);
- errors++;
- }
- if (SUBTRACT_COUNTER(after->c7, before->c7, delta->c7)) {
- fprintf(stderr, "cpu%d c7 counter went backwards %llX to %llX\n",
- before->cpu, before->c7, after->c7);
- errors++;
- }
- if (SUBTRACT_COUNTER(after->pc2, before->pc2, delta->pc2)) {
- fprintf(stderr, "cpu%d pc2 counter went backwards %llX to %llX\n",
- before->cpu, before->pc2, after->pc2);
- errors++;
- }
- if (SUBTRACT_COUNTER(after->pc3, before->pc3, delta->pc3)) {
- fprintf(stderr, "cpu%d pc3 counter went backwards %llX to %llX\n",
- before->cpu, before->pc3, after->pc3);
- errors++;
- }
- if (SUBTRACT_COUNTER(after->pc6, before->pc6, delta->pc6)) {
- fprintf(stderr, "cpu%d pc6 counter went backwards %llX to %llX\n",
- before->cpu, before->pc6, after->pc6);
- errors++;
- }
- if (SUBTRACT_COUNTER(after->pc7, before->pc7, delta->pc7)) {
- fprintf(stderr, "cpu%d pc7 counter went backwards %llX to %llX\n",
- before->cpu, before->pc7, after->pc7);
- errors++;
- }
+ if ((new->aperf > old->aperf) && (new->mperf > old->mperf)) {
+ old->aperf = new->aperf - old->aperf;
+ old->mperf = new->mperf - old->mperf;
+ } else {
- perf_err = SUBTRACT_COUNTER(after->aperf, before->aperf, delta->aperf);
- if (perf_err) {
- fprintf(stderr, "cpu%d aperf counter went backwards %llX to %llX\n",
- before->cpu, before->aperf, after->aperf);
- }
- perf_err |= SUBTRACT_COUNTER(after->mperf, before->mperf, delta->mperf);
- if (perf_err) {
- fprintf(stderr, "cpu%d mperf counter went backwards %llX to %llX\n",
- before->cpu, before->mperf, after->mperf);
- }
- if (perf_err) {
- if (!aperf_mperf_unstable) {
- fprintf(stderr, "%s: APERF or MPERF went backwards *\n", progname);
- fprintf(stderr, "* Frequency results do not cover entire interval *\n");
- fprintf(stderr, "* fix this by running Linux-2.6.30 or later *\n");
+ if (!aperf_mperf_unstable) {
+ fprintf(stderr, "%s: APERF or MPERF went backwards *\n", progname);
+ fprintf(stderr, "* Frequency results do not cover entire interval *\n");
+ fprintf(stderr, "* fix this by running Linux-2.6.30 or later *\n");
- aperf_mperf_unstable = 1;
- }
- /*
- * mperf delta is likely a huge "positive" number
- * can not use it for calculating c0 time
- */
- skip_c0 = 1;
- skip_c1 = 1;
+ aperf_mperf_unstable = 1;
}
-
/*
- * As mperf and tsc collection are not atomic,
- * it is possible for mperf's non-halted cycles
- * to exceed TSC's all cycles: show c1 = 0% in that case.
+ * mperf delta is likely a huge "positive" number
+ * can not use it for calculating c0 time
*/
- if (delta->mperf > delta->tsc)
- delta->c1 = 0;
- else /* normal case, derive c1 */
- delta->c1 = delta->tsc - delta->mperf
- - delta->c3 - delta->c6 - delta->c7;
+ skip_c0 = 1;
+ skip_c1 = 1;
+ }
- if (delta->mperf == 0)
- delta->mperf = 1; /* divide by 0 protection */
- /*
- * for "extra msr", just copy the latest w/o subtracting
- */
- delta->extra_msr = after->extra_msr;
- if (errors) {
- fprintf(stderr, "ERROR cpu%d before:\n", before->cpu);
- dump_cnt(before);
- fprintf(stderr, "ERROR cpu%d after:\n", before->cpu);
- dump_cnt(after);
- errors = 0;
- }
+ /*
+ * As counter collection is not atomic,
+ * it is possible for mperf's non-halted cycles + idle states
+ * to exceed TSC's all cycles: show c1 = 0% in that case.
+ */
+ if ((old->mperf + core_delta->c3 + core_delta->c6 + core_delta->c7) > old->tsc)
+ old->c1 = 0;
+ else {
+ /* normal case, derive c1 */
+ old->c1 = old->tsc - old->mperf - core_delta->c3
+ - core_delta->c6 - core_delta->c7;
+ }
+
+ if (old->mperf == 0) {
+ if (verbose > 1) fprintf(stderr, "cpu%d MPERF 0!\n", old->cpu_id);
+ old->mperf = 1; /* divide by 0 protection */
}
+
+ /*
+ * for "extra msr", just copy the latest w/o subtracting
+ */
+ old->extra_msr = new->extra_msr;
+}
+
+int delta_cpu(struct thread_data *t, struct core_data *c,
+ struct pkg_data *p, struct thread_data *t2,
+ struct core_data *c2, struct pkg_data *p2)
+{
+ /* calculate core delta only for 1st thread in core */
+ if (t->flags & CPU_IS_FIRST_THREAD_IN_CORE)
+ delta_core(c, c2);
+
+ /* always calculate thread delta */
+ delta_thread(t, t2, c2); /* c2 is core delta */
+
+ /* calculate package delta only for 1st core in package */
+ if (t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE)
+ delta_package(p, p2);
+
return 0;
}
-void compute_average(struct counters *delta, struct counters *avg)
+void clear_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p)
+{
+ t->tsc = 0;
+ t->aperf = 0;
+ t->mperf = 0;
+ t->c1 = 0;
+
+ /* tells format_counters to dump all fields from this set */
+ t->flags = CPU_IS_FIRST_THREAD_IN_CORE | CPU_IS_FIRST_CORE_IN_PACKAGE;
+
+ c->c3 = 0;
+ c->c6 = 0;
+ c->c7 = 0;
+
+ p->pc2 = 0;
+ p->pc3 = 0;
+ p->pc6 = 0;
+ p->pc7 = 0;
+}
+int sum_counters(struct thread_data *t, struct core_data *c,
+ struct pkg_data *p)
{
- struct counters *sum;
+ average.threads.tsc += t->tsc;
+ average.threads.aperf += t->aperf;
+ average.threads.mperf += t->mperf;
+ average.threads.c1 += t->c1;
- sum = calloc(1, sizeof(struct counters));
- if (sum == NULL) {
- perror("calloc sum");
- exit(1);
- }
+ /* sum per-core values only for 1st thread in core */
+ if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE))
+ return 0;
- for (; delta; delta = delta->next) {
- sum->tsc += delta->tsc;
- sum->c1 += delta->c1;
- sum->c3 += delta->c3;
- sum->c6 += delta->c6;
- sum->c7 += delta->c7;
- sum->aperf += delta->aperf;
- sum->mperf += delta->mperf;
- sum->pc2 += delta->pc2;
- sum->pc3 += delta->pc3;
- sum->pc6 += delta->pc6;
- sum->pc7 += delta->pc7;
- }
- avg->tsc = sum->tsc/num_cpus;
- avg->c1 = sum->c1/num_cpus;
- avg->c3 = sum->c3/num_cpus;
- avg->c6 = sum->c6/num_cpus;
- avg->c7 = sum->c7/num_cpus;
- avg->aperf = sum->aperf/num_cpus;
- avg->mperf = sum->mperf/num_cpus;
- avg->pc2 = sum->pc2/num_cpus;
- avg->pc3 = sum->pc3/num_cpus;
- avg->pc6 = sum->pc6/num_cpus;
- avg->pc7 = sum->pc7/num_cpus;
-
- free(sum);
+ average.cores.c3 += c->c3;
+ average.cores.c6 += c->c6;
+ average.cores.c7 += c->c7;
+
+ /* sum per-pkg values only for 1st core in pkg */
+ if (!(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE))
+ return 0;
+
+ average.packages.pc2 += p->pc2;
+ average.packages.pc3 += p->pc3;
+ average.packages.pc6 += p->pc6;
+ average.packages.pc7 += p->pc7;
+
+ return 0;
}
+/*
+ * sum the counters for all cpus in the system
+ * compute the weighted average
+ */
+void compute_average(struct thread_data *t, struct core_data *c,
+ struct pkg_data *p)
+{
+ clear_counters(&average.threads, &average.cores, &average.packages);
+
+ for_all_cpus(sum_counters, t, c, p);
+
+ average.threads.tsc /= topo.num_cpus;
+ average.threads.aperf /= topo.num_cpus;
+ average.threads.mperf /= topo.num_cpus;
+ average.threads.c1 /= topo.num_cpus;
+
+ average.cores.c3 /= topo.num_cores;
+ average.cores.c6 /= topo.num_cores;
+ average.cores.c7 /= topo.num_cores;
-int get_counters(struct counters *cnt)
+ average.packages.pc2 /= topo.num_packages;
+ average.packages.pc3 /= topo.num_packages;
+ average.packages.pc6 /= topo.num_packages;
+ average.packages.pc7 /= topo.num_packages;
+}
+
+static unsigned long long rdtsc(void)
{
- for ( ; cnt; cnt = cnt->next) {
+ unsigned int low, high;
- if (cpu_migrate(cnt->cpu))
- return -1;
+ asm volatile("rdtsc" : "=a" (low), "=d" (high));
- if (get_msr(cnt->cpu, MSR_TSC, &cnt->tsc))
- return -1;
+ return low | ((unsigned long long)high) << 32;
+}
- if (has_aperf) {
- if (get_msr(cnt->cpu, MSR_APERF, &cnt->aperf))
- return -1;
- if (get_msr(cnt->cpu, MSR_MPERF, &cnt->mperf))
- return -1;
- }
- if (do_nhm_cstates) {
- if (get_msr(cnt->cpu, MSR_CORE_C3_RESIDENCY, &cnt->c3))
- return -1;
- if (get_msr(cnt->cpu, MSR_CORE_C6_RESIDENCY, &cnt->c6))
- return -1;
- }
+/*
+ * get_counters(...)
+ * migrate to cpu
+ * acquire and record local counters for that cpu
+ */
+int get_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p)
+{
+ int cpu = t->cpu_id;
- if (do_snb_cstates)
- if (get_msr(cnt->cpu, MSR_CORE_C7_RESIDENCY, &cnt->c7))
- return -1;
+ if (cpu_migrate(cpu))
+ return -1;
- if (do_nhm_cstates) {
- if (get_msr(cnt->cpu, MSR_PKG_C3_RESIDENCY, &cnt->pc3))
- return -1;
- if (get_msr(cnt->cpu, MSR_PKG_C6_RESIDENCY, &cnt->pc6))
- return -1;
- }
- if (do_snb_cstates) {
- if (get_msr(cnt->cpu, MSR_PKG_C2_RESIDENCY, &cnt->pc2))
- return -1;
- if (get_msr(cnt->cpu, MSR_PKG_C7_RESIDENCY, &cnt->pc7))
- return -1;
- }
- if (extra_msr_offset)
- if (get_msr(cnt->cpu, extra_msr_offset, &cnt->extra_msr))
- return -1;
+ t->tsc = rdtsc(); /* we are running on local CPU of interest */
+
+ if (has_aperf) {
+ if (get_msr(cpu, MSR_APERF, &t->aperf))
+ return -3;
+ if (get_msr(cpu, MSR_MPERF, &t->mperf))
+ return -4;
+ }
+
+ if (extra_msr_offset)
+ if (get_msr(cpu, extra_msr_offset, &t->extra_msr))
+ return -5;
+
+ /* collect core counters only for 1st thread in core */
+ if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE))
+ return 0;
+
+ if (do_nhm_cstates) {
+ if (get_msr(cpu, MSR_CORE_C3_RESIDENCY, &c->c3))
+ return -6;
+ if (get_msr(cpu, MSR_CORE_C6_RESIDENCY, &c->c6))
+ return -7;
+ }
+
+ if (do_snb_cstates)
+ if (get_msr(cpu, MSR_CORE_C7_RESIDENCY, &c->c7))
+ return -8;
+
+ /* collect package counters only for 1st core in package */
+ if (!(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE))
+ return 0;
+
+ if (do_nhm_cstates) {
+ if (get_msr(cpu, MSR_PKG_C3_RESIDENCY, &p->pc3))
+ return -9;
+ if (get_msr(cpu, MSR_PKG_C6_RESIDENCY, &p->pc6))
+ return -10;
+ }
+ if (do_snb_cstates) {
+ if (get_msr(cpu, MSR_PKG_C2_RESIDENCY, &p->pc2))
+ return -11;
+ if (get_msr(cpu, MSR_PKG_C7_RESIDENCY, &p->pc7))
+ return -12;
}
return 0;
}
-void print_nehalem_info(void)
+void print_verbose_header(void)
{
unsigned long long msr;
unsigned int ratio;
}
-void free_counter_list(struct counters *list)
+void free_all_buffers(void)
{
- struct counters *p;
+ CPU_FREE(cpu_present_set);
+ cpu_present_set = NULL;
+ cpu_present_set = 0;
- for (p = list; p; ) {
- struct counters *free_me;
+ CPU_FREE(cpu_affinity_set);
+ cpu_affinity_set = NULL;
+ cpu_affinity_setsize = 0;
- free_me = p;
- p = p->next;
- free(free_me);
- }
-}
+ free(thread_even);
+ free(core_even);
+ free(package_even);
-void free_all_counters(void)
-{
- free_counter_list(cnt_even);
- cnt_even = NULL;
+ thread_even = NULL;
+ core_even = NULL;
+ package_even = NULL;
- free_counter_list(cnt_odd);
- cnt_odd = NULL;
+ free(thread_odd);
+ free(core_odd);
+ free(package_odd);
- free_counter_list(cnt_delta);
- cnt_delta = NULL;
+ thread_odd = NULL;
+ core_odd = NULL;
+ package_odd = NULL;
- free_counter_list(cnt_average);
- cnt_average = NULL;
+ free(output_buffer);
+ output_buffer = NULL;
+ outp = NULL;
}
-void insert_counters(struct counters **list,
- struct counters *new)
+/*
+ * cpu_is_first_sibling_in_core(cpu)
+ * return 1 if given CPU is 1st HT sibling in the core
+ */
+int cpu_is_first_sibling_in_core(int cpu)
{
- struct counters *prev;
-
- /*
- * list was empty
- */
- if (*list == NULL) {
- new->next = *list;
- *list = new;
- return;
- }
-
- if (!summary_only)
- show_cpu = 1; /* there is more than one CPU */
-
- /*
- * insert on front of list.
- * It is sorted by ascending package#, core#, cpu#
- */
- if (((*list)->pkg > new->pkg) ||
- (((*list)->pkg == new->pkg) && ((*list)->core > new->core)) ||
- (((*list)->pkg == new->pkg) && ((*list)->core == new->core) && ((*list)->cpu > new->cpu))) {
- new->next = *list;
- *list = new;
- return;
- }
-
- prev = *list;
-
- while (prev->next && (prev->next->pkg < new->pkg)) {
- prev = prev->next;
- if (!summary_only)
- show_pkg = 1; /* there is more than 1 package */
- }
-
- while (prev->next && (prev->next->pkg == new->pkg)
- && (prev->next->core < new->core)) {
- prev = prev->next;
- if (!summary_only)
- show_core = 1; /* there is more than 1 core */
- }
+ char path[64];
+ FILE *filep;
+ int first_cpu;
- while (prev->next && (prev->next->pkg == new->pkg)
- && (prev->next->core == new->core)
- && (prev->next->cpu < new->cpu)) {
- prev = prev->next;
+ sprintf(path, "/sys/devices/system/cpu/cpu%d/topology/thread_siblings_list", cpu);
+ filep = fopen(path, "r");
+ if (filep == NULL) {
+ perror(path);
+ exit(1);
}
-
- /*
- * insert after "prev"
- */
- new->next = prev->next;
- prev->next = new;
+ fscanf(filep, "%d", &first_cpu);
+ fclose(filep);
+ return (cpu == first_cpu);
}
-void alloc_new_counters(int pkg, int core, int cpu)
+/*
+ * cpu_is_first_core_in_package(cpu)
+ * return 1 if given CPU is 1st core in package
+ */
+int cpu_is_first_core_in_package(int cpu)
{
- struct counters *new;
-
- if (verbose > 1)
- printf("pkg%d core%d, cpu%d\n", pkg, core, cpu);
-
- new = (struct counters *)calloc(1, sizeof(struct counters));
- if (new == NULL) {
- perror("calloc");
- exit(1);
- }
- new->pkg = pkg;
- new->core = core;
- new->cpu = cpu;
- insert_counters(&cnt_odd, new);
-
- new = (struct counters *)calloc(1,
- sizeof(struct counters));
- if (new == NULL) {
- perror("calloc");
- exit(1);
- }
- new->pkg = pkg;
- new->core = core;
- new->cpu = cpu;
- insert_counters(&cnt_even, new);
-
- new = (struct counters *)calloc(1, sizeof(struct counters));
- if (new == NULL) {
- perror("calloc");
- exit(1);
- }
- new->pkg = pkg;
- new->core = core;
- new->cpu = cpu;
- insert_counters(&cnt_delta, new);
+ char path[64];
+ FILE *filep;
+ int first_cpu;
- new = (struct counters *)calloc(1, sizeof(struct counters));
- if (new == NULL) {
- perror("calloc");
+ sprintf(path, "/sys/devices/system/cpu/cpu%d/topology/core_siblings_list", cpu);
+ filep = fopen(path, "r");
+ if (filep == NULL) {
+ perror(path);
exit(1);
}
- new->pkg = pkg;
- new->core = core;
- new->cpu = cpu;
- cnt_average = new;
+ fscanf(filep, "%d", &first_cpu);
+ fclose(filep);
+ return (cpu == first_cpu);
}
int get_physical_package_id(int cpu)
{
- char path[64];
+ char path[80];
FILE *filep;
int pkg;
int get_core_id(int cpu)
{
- char path[64];
+ char path[80];
FILE *filep;
int core;
return core;
}
+int get_num_ht_siblings(int cpu)
+{
+ char path[80];
+ FILE *filep;
+ int sib1, sib2;
+ int matches;
+ char character;
+
+ sprintf(path, "/sys/devices/system/cpu/cpu%d/topology/thread_siblings_list", cpu);
+ filep = fopen(path, "r");
+ if (filep == NULL) {
+ perror(path);
+ exit(1);
+ }
+ /*
+ * file format:
+ * if a pair of number with a character between: 2 siblings (eg. 1-2, or 1,4)
+ * otherwinse 1 sibling (self).
+ */
+ matches = fscanf(filep, "%d%c%d\n", &sib1, &character, &sib2);
+
+ fclose(filep);
+
+ if (matches == 3)
+ return 2;
+ else
+ return 1;
+}
+
/*
- * run func(pkg, core, cpu) on every cpu in /proc/stat
+ * run func(thread, core, package) in topology order
+ * skip non-present cpus
*/
-int for_all_cpus(void (func)(int, int, int))
+int for_all_cpus_2(int (func)(struct thread_data *, struct core_data *,
+ struct pkg_data *, struct thread_data *, struct core_data *,
+ struct pkg_data *), struct thread_data *thread_base,
+ struct core_data *core_base, struct pkg_data *pkg_base,
+ struct thread_data *thread_base2, struct core_data *core_base2,
+ struct pkg_data *pkg_base2)
+{
+ int retval, pkg_no, core_no, thread_no;
+
+ for (pkg_no = 0; pkg_no < topo.num_packages; ++pkg_no) {
+ for (core_no = 0; core_no < topo.num_cores_per_pkg; ++core_no) {
+ for (thread_no = 0; thread_no <
+ topo.num_threads_per_core; ++thread_no) {
+ struct thread_data *t, *t2;
+ struct core_data *c, *c2;
+ struct pkg_data *p, *p2;
+
+ t = GET_THREAD(thread_base, thread_no, core_no, pkg_no);
+
+ if (cpu_is_not_present(t->cpu_id))
+ continue;
+
+ t2 = GET_THREAD(thread_base2, thread_no, core_no, pkg_no);
+
+ c = GET_CORE(core_base, core_no, pkg_no);
+ c2 = GET_CORE(core_base2, core_no, pkg_no);
+
+ p = GET_PKG(pkg_base, pkg_no);
+ p2 = GET_PKG(pkg_base2, pkg_no);
+
+ retval = func(t, c, p, t2, c2, p2);
+ if (retval)
+ return retval;
+ }
+ }
+ }
+ return 0;
+}
+
+/*
+ * run func(cpu) on every cpu in /proc/stat
+ * return max_cpu number
+ */
+int for_all_proc_cpus(int (func)(int))
{
FILE *fp;
- int cpu_count;
+ int cpu_num;
int retval;
fp = fopen(proc_stat, "r");
exit(1);
}
- for (cpu_count = 0; ; cpu_count++) {
- int cpu;
-
- retval = fscanf(fp, "cpu%u %*d %*d %*d %*d %*d %*d %*d %*d %*d %*d\n", &cpu);
+ while (1) {
+ retval = fscanf(fp, "cpu%u %*d %*d %*d %*d %*d %*d %*d %*d %*d %*d\n", &cpu_num);
if (retval != 1)
break;
- func(get_physical_package_id(cpu), get_core_id(cpu), cpu);
+ retval = func(cpu_num);
+ if (retval) {
+ fclose(fp);
+ return(retval);
+ }
}
fclose(fp);
- return cpu_count;
+ return 0;
}
void re_initialize(void)
{
- free_all_counters();
- num_cpus = for_all_cpus(alloc_new_counters);
- cpu_mask_uninit();
- cpu_mask_init(num_cpus);
- printf("turbostat: re-initialized with num_cpus %d\n", num_cpus);
+ free_all_buffers();
+ setup_all_buffers();
+ printf("turbostat: re-initialized with num_cpus %d\n", topo.num_cpus);
}
-void dummy(int pkg, int core, int cpu) { return; }
+
/*
- * check to see if a cpu came on-line
+ * count_cpus()
+ * remember the last one seen, it will be the max
*/
-int verify_num_cpus(void)
+int count_cpus(int cpu)
{
- int new_num_cpus;
+ if (topo.max_cpu_num < cpu)
+ topo.max_cpu_num = cpu;
- new_num_cpus = for_all_cpus(dummy);
-
- if (new_num_cpus != num_cpus) {
- if (verbose)
- printf("num_cpus was %d, is now %d\n",
- num_cpus, new_num_cpus);
- return -1;
- }
+ topo.num_cpus += 1;
+ return 0;
+}
+int mark_cpu_present(int cpu)
+{
+ CPU_SET_S(cpu, cpu_present_setsize, cpu_present_set);
return 0;
}
void turbostat_loop()
{
+ int retval;
+
restart:
- get_counters(cnt_even);
+ retval = for_all_cpus(get_counters, EVEN_COUNTERS);
+ if (retval) {
+ re_initialize();
+ goto restart;
+ }
gettimeofday(&tv_even, (struct timezone *)NULL);
while (1) {
- if (verify_num_cpus()) {
+ if (for_all_proc_cpus(cpu_is_not_present)) {
re_initialize();
goto restart;
}
sleep(interval_sec);
- if (get_counters(cnt_odd)) {
+ retval = for_all_cpus(get_counters, ODD_COUNTERS);
+ if (retval) {
re_initialize();
goto restart;
}
gettimeofday(&tv_odd, (struct timezone *)NULL);
- compute_delta(cnt_odd, cnt_even, cnt_delta);
timersub(&tv_odd, &tv_even, &tv_delta);
- compute_average(cnt_delta, cnt_average);
- print_counters(cnt_delta);
+ for_all_cpus_2(delta_cpu, ODD_COUNTERS, EVEN_COUNTERS);
+ compute_average(EVEN_COUNTERS);
+ format_all_counters(EVEN_COUNTERS);
+ flush_stdout();
sleep(interval_sec);
- if (get_counters(cnt_even)) {
+ retval = for_all_cpus(get_counters, EVEN_COUNTERS);
+ if (retval) {
re_initialize();
goto restart;
}
gettimeofday(&tv_even, (struct timezone *)NULL);
- compute_delta(cnt_even, cnt_odd, cnt_delta);
timersub(&tv_even, &tv_odd, &tv_delta);
- compute_average(cnt_delta, cnt_average);
- print_counters(cnt_delta);
+ for_all_cpus_2(delta_cpu, EVEN_COUNTERS, ODD_COUNTERS);
+ compute_average(ODD_COUNTERS);
+ format_all_counters(ODD_COUNTERS);
+ flush_stdout();
}
}
switch (model) {
case 0x2A:
case 0x2D:
+ case 0x3A: /* IVB */
+ case 0x3D: /* IVB Xeon */
return 1;
}
return 0;
return 0;
}
+void topology_probe()
+{
+ int i;
+ int max_core_id = 0;
+ int max_package_id = 0;
+ int max_siblings = 0;
+ struct cpu_topology {
+ int core_id;
+ int physical_package_id;
+ } *cpus;
+
+ /* Initialize num_cpus, max_cpu_num */
+ topo.num_cpus = 0;
+ topo.max_cpu_num = 0;
+ for_all_proc_cpus(count_cpus);
+ if (!summary_only && topo.num_cpus > 1)
+ show_cpu = 1;
+
+ if (verbose > 1)
+ fprintf(stderr, "num_cpus %d max_cpu_num %d\n", topo.num_cpus, topo.max_cpu_num);
+
+ cpus = calloc(1, (topo.max_cpu_num + 1) * sizeof(struct cpu_topology));
+ if (cpus == NULL) {
+ perror("calloc cpus");
+ exit(1);
+ }
+
+ /*
+ * Allocate and initialize cpu_present_set
+ */
+ cpu_present_set = CPU_ALLOC((topo.max_cpu_num + 1));
+ if (cpu_present_set == NULL) {
+ perror("CPU_ALLOC");
+ exit(3);
+ }
+ cpu_present_setsize = CPU_ALLOC_SIZE((topo.max_cpu_num + 1));
+ CPU_ZERO_S(cpu_present_setsize, cpu_present_set);
+ for_all_proc_cpus(mark_cpu_present);
+
+ /*
+ * Allocate and initialize cpu_affinity_set
+ */
+ cpu_affinity_set = CPU_ALLOC((topo.max_cpu_num + 1));
+ if (cpu_affinity_set == NULL) {
+ perror("CPU_ALLOC");
+ exit(3);
+ }
+ cpu_affinity_setsize = CPU_ALLOC_SIZE((topo.max_cpu_num + 1));
+ CPU_ZERO_S(cpu_affinity_setsize, cpu_affinity_set);
+
+
+ /*
+ * For online cpus
+ * find max_core_id, max_package_id
+ */
+ for (i = 0; i <= topo.max_cpu_num; ++i) {
+ int siblings;
+
+ if (cpu_is_not_present(i)) {
+ if (verbose > 1)
+ fprintf(stderr, "cpu%d NOT PRESENT\n", i);
+ continue;
+ }
+ cpus[i].core_id = get_core_id(i);
+ if (cpus[i].core_id > max_core_id)
+ max_core_id = cpus[i].core_id;
+
+ cpus[i].physical_package_id = get_physical_package_id(i);
+ if (cpus[i].physical_package_id > max_package_id)
+ max_package_id = cpus[i].physical_package_id;
+
+ siblings = get_num_ht_siblings(i);
+ if (siblings > max_siblings)
+ max_siblings = siblings;
+ if (verbose > 1)
+ fprintf(stderr, "cpu %d pkg %d core %d\n",
+ i, cpus[i].physical_package_id, cpus[i].core_id);
+ }
+ topo.num_cores_per_pkg = max_core_id + 1;
+ if (verbose > 1)
+ fprintf(stderr, "max_core_id %d, sizing for %d cores per package\n",
+ max_core_id, topo.num_cores_per_pkg);
+ if (!summary_only && topo.num_cores_per_pkg > 1)
+ show_core = 1;
+
+ topo.num_packages = max_package_id + 1;
+ if (verbose > 1)
+ fprintf(stderr, "max_package_id %d, sizing for %d packages\n",
+ max_package_id, topo.num_packages);
+ if (!summary_only && topo.num_packages > 1)
+ show_pkg = 1;
+
+ topo.num_threads_per_core = max_siblings;
+ if (verbose > 1)
+ fprintf(stderr, "max_siblings %d\n", max_siblings);
+
+ free(cpus);
+}
+
+void
+allocate_counters(struct thread_data **t, struct core_data **c, struct pkg_data **p)
+{
+ int i;
+
+ *t = calloc(topo.num_threads_per_core * topo.num_cores_per_pkg *
+ topo.num_packages, sizeof(struct thread_data));
+ if (*t == NULL)
+ goto error;
+
+ for (i = 0; i < topo.num_threads_per_core *
+ topo.num_cores_per_pkg * topo.num_packages; i++)
+ (*t)[i].cpu_id = -1;
+
+ *c = calloc(topo.num_cores_per_pkg * topo.num_packages,
+ sizeof(struct core_data));
+ if (*c == NULL)
+ goto error;
+
+ for (i = 0; i < topo.num_cores_per_pkg * topo.num_packages; i++)
+ (*c)[i].core_id = -1;
+
+ *p = calloc(topo.num_packages, sizeof(struct pkg_data));
+ if (*p == NULL)
+ goto error;
+
+ for (i = 0; i < topo.num_packages; i++)
+ (*p)[i].package_id = i;
+
+ return;
+error:
+ perror("calloc counters");
+ exit(1);
+}
+/*
+ * init_counter()
+ *
+ * set cpu_id, core_num, pkg_num
+ * set FIRST_THREAD_IN_CORE and FIRST_CORE_IN_PACKAGE
+ *
+ * increment topo.num_cores when 1st core in pkg seen
+ */
+void init_counter(struct thread_data *thread_base, struct core_data *core_base,
+ struct pkg_data *pkg_base, int thread_num, int core_num,
+ int pkg_num, int cpu_id)
+{
+ struct thread_data *t;
+ struct core_data *c;
+ struct pkg_data *p;
+
+ t = GET_THREAD(thread_base, thread_num, core_num, pkg_num);
+ c = GET_CORE(core_base, core_num, pkg_num);
+ p = GET_PKG(pkg_base, pkg_num);
+
+ t->cpu_id = cpu_id;
+ if (thread_num == 0) {
+ t->flags |= CPU_IS_FIRST_THREAD_IN_CORE;
+ if (cpu_is_first_core_in_package(cpu_id))
+ t->flags |= CPU_IS_FIRST_CORE_IN_PACKAGE;
+ }
+
+ c->core_id = core_num;
+ p->package_id = pkg_num;
+}
+
+
+int initialize_counters(int cpu_id)
+{
+ int my_thread_id, my_core_id, my_package_id;
+
+ my_package_id = get_physical_package_id(cpu_id);
+ my_core_id = get_core_id(cpu_id);
+
+ if (cpu_is_first_sibling_in_core(cpu_id)) {
+ my_thread_id = 0;
+ topo.num_cores++;
+ } else {
+ my_thread_id = 1;
+ }
+
+ init_counter(EVEN_COUNTERS, my_thread_id, my_core_id, my_package_id, cpu_id);
+ init_counter(ODD_COUNTERS, my_thread_id, my_core_id, my_package_id, cpu_id);
+ return 0;
+}
+
+void allocate_output_buffer()
+{
+ output_buffer = calloc(1, (1 + topo.num_cpus) * 128);
+ outp = output_buffer;
+ if (outp == NULL) {
+ perror("calloc");
+ exit(-1);
+ }
+}
+
+void setup_all_buffers(void)
+{
+ topology_probe();
+ allocate_counters(&thread_even, &core_even, &package_even);
+ allocate_counters(&thread_odd, &core_odd, &package_odd);
+ allocate_output_buffer();
+ for_all_proc_cpus(initialize_counters);
+}
void turbostat_init()
{
check_cpuid();
check_dev_msr();
check_super_user();
- num_cpus = for_all_cpus(alloc_new_counters);
- cpu_mask_init(num_cpus);
+ setup_all_buffers();
if (verbose)
- print_nehalem_info();
+ print_verbose_header();
}
int fork_it(char **argv)
{
- int retval;
pid_t child_pid;
- get_counters(cnt_even);
+
+ for_all_cpus(get_counters, EVEN_COUNTERS);
+ /* clear affinity side-effect of get_counters() */
+ sched_setaffinity(0, cpu_present_setsize, cpu_present_set);
gettimeofday(&tv_even, (struct timezone *)NULL);
child_pid = fork();
exit(1);
}
}
- get_counters(cnt_odd);
+ /*
+ * n.b. fork_it() does not check for errors from for_all_cpus()
+ * because re-starting is problematic when forking
+ */
+ for_all_cpus(get_counters, ODD_COUNTERS);
gettimeofday(&tv_odd, (struct timezone *)NULL);
- retval = compute_delta(cnt_odd, cnt_even, cnt_delta);
-
timersub(&tv_odd, &tv_even, &tv_delta);
- compute_average(cnt_delta, cnt_average);
- if (!retval)
- print_counters(cnt_delta);
+ for_all_cpus_2(delta_cpu, ODD_COUNTERS, EVEN_COUNTERS);
+ compute_average(EVEN_COUNTERS);
+ format_all_counters(EVEN_COUNTERS);
+ flush_stderr();
fprintf(stderr, "%.6f sec\n", tv_delta.tv_sec + tv_delta.tv_usec/1000000.0);
progname = argv[0];
- while ((opt = getopt(argc, argv, "+svi:M:")) != -1) {
+ while ((opt = getopt(argc, argv, "+cpsvi:M:")) != -1) {
switch (opt) {
+ case 'c':
+ show_core_only++;
+ break;
+ case 'p':
+ show_pkg_only++;
+ break;
case 's':
summary_only++;
break;
cmdline(argc, argv);
if (verbose > 1)
- fprintf(stderr, "turbostat Dec 6, 2010"
+ fprintf(stderr, "turbostat v2.0 May 16, 2012"
" - Len Brown <lenb@kernel.org>\n");
- if (verbose > 1)
- fprintf(stderr, "http://userweb.kernel.org/~lenb/acpi/utils/pmtools/turbostat/\n");
turbostat_init();
}
#ifdef __KVM_HAVE_MSI
+static irqreturn_t kvm_assigned_dev_msi(int irq, void *dev_id)
+{
+ return IRQ_WAKE_THREAD;
+}
+
static int assigned_device_enable_host_msi(struct kvm *kvm,
struct kvm_assigned_dev_kernel *dev)
{
}
dev->host_irq = dev->dev->irq;
- if (request_threaded_irq(dev->host_irq, NULL,
+ if (request_threaded_irq(dev->host_irq, kvm_assigned_dev_msi,
kvm_assigned_dev_thread_msi, 0,
dev->irq_name, dev)) {
pci_disable_msi(dev->dev);
#endif
#ifdef __KVM_HAVE_MSIX
+static irqreturn_t kvm_assigned_dev_msix(int irq, void *dev_id)
+{
+ return IRQ_WAKE_THREAD;
+}
+
static int assigned_device_enable_host_msix(struct kvm *kvm,
struct kvm_assigned_dev_kernel *dev)
{
for (i = 0; i < dev->entries_nr; i++) {
r = request_threaded_irq(dev->host_msix_entries[i].vector,
- NULL, kvm_assigned_dev_thread_msix,
+ kvm_assigned_dev_msix,
+ kvm_assigned_dev_thread_msix,
0, dev->irq_name, dev);
if (r)
goto err;
int r = 0, idx;
struct kvm_assigned_dev_kernel *match;
struct pci_dev *dev;
- u8 header_type;
if (!(assigned_dev->flags & KVM_DEV_ASSIGN_ENABLE_IOMMU))
return -EINVAL;
}
/* Don't allow bridges to be assigned */
- pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type);
- if ((header_type & PCI_HEADER_TYPE) != PCI_HEADER_TYPE_NORMAL) {
+ if (dev->hdr_type != PCI_HEADER_TYPE_NORMAL) {
r = -EPERM;
goto out_put;
}
}
static int
-kvm_irqfd_assign(struct kvm *kvm, int fd, int gsi)
+kvm_irqfd_assign(struct kvm *kvm, struct kvm_irqfd *args)
{
struct kvm_irq_routing_table *irq_rt;
struct _irqfd *irqfd, *tmp;
return -ENOMEM;
irqfd->kvm = kvm;
- irqfd->gsi = gsi;
+ irqfd->gsi = args->gsi;
INIT_LIST_HEAD(&irqfd->list);
INIT_WORK(&irqfd->inject, irqfd_inject);
INIT_WORK(&irqfd->shutdown, irqfd_shutdown);
- file = eventfd_fget(fd);
+ file = eventfd_fget(args->fd);
if (IS_ERR(file)) {
ret = PTR_ERR(file);
goto fail;
* shutdown any irqfd's that match fd+gsi
*/
static int
-kvm_irqfd_deassign(struct kvm *kvm, int fd, int gsi)
+kvm_irqfd_deassign(struct kvm *kvm, struct kvm_irqfd *args)
{
struct _irqfd *irqfd, *tmp;
struct eventfd_ctx *eventfd;
- eventfd = eventfd_ctx_fdget(fd);
+ eventfd = eventfd_ctx_fdget(args->fd);
if (IS_ERR(eventfd))
return PTR_ERR(eventfd);
spin_lock_irq(&kvm->irqfds.lock);
list_for_each_entry_safe(irqfd, tmp, &kvm->irqfds.items, list) {
- if (irqfd->eventfd == eventfd && irqfd->gsi == gsi) {
+ if (irqfd->eventfd == eventfd && irqfd->gsi == args->gsi) {
/*
* This rcu_assign_pointer is needed for when
* another thread calls kvm_irq_routing_update before
}
int
-kvm_irqfd(struct kvm *kvm, int fd, int gsi, int flags)
+kvm_irqfd(struct kvm *kvm, struct kvm_irqfd *args)
{
- if (flags & KVM_IRQFD_FLAG_DEASSIGN)
- return kvm_irqfd_deassign(kvm, fd, gsi);
+ if (args->flags & ~KVM_IRQFD_FLAG_DEASSIGN)
+ return -EINVAL;
+
+ if (args->flags & KVM_IRQFD_FLAG_DEASSIGN)
+ return kvm_irqfd_deassign(kvm, args);
- return kvm_irqfd_assign(kvm, fd, gsi);
+ return kvm_irqfd_assign(kvm, args);
}
/*
*/
hlist_for_each_entry(ei, n, &rt->map[ue->gsi], link)
if (ei->type == KVM_IRQ_ROUTING_MSI ||
+ ue->type == KVM_IRQ_ROUTING_MSI ||
ue->u.irqchip.irqchip == ei->irqchip.irqchip)
return r;
r = -EFAULT;
if (copy_from_user(&data, argp, sizeof data))
goto out;
- r = kvm_irqfd(kvm, data.fd, data.gsi, data.flags);
+ r = kvm_irqfd(kvm, &data);
break;
}
case KVM_IOEVENTFD: {
kvm_arch_hardware_unsetup();
kvm_arch_exit();
free_cpumask_var(cpus_hardware_enabled);
+ __free_page(fault_page);
__free_page(hwpoison_page);
__free_page(bad_page);
}