Use menuconfig objects: MTD

Use menuconfigs instead of menus, so the whole menu can be disabled at once
instead of going through all options.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index 26f75c29944017e53bb42ca7316d64550a993e65..fedf9b7eae5d96f1e6ccd5393ca334c348260c6a 100644 (file)
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -1,8 +1,6 @@
 # $Id: Kconfig,v 1.11 2005/11/07 11:14:19 gleixner Exp $
 
-menu "Memory Technology Devices (MTD)"
-
-config MTD
+menuconfig MTD
        tristate "Memory Technology Device (MTD) support"
        help
          Memory Technology Devices are flash, RAM and similar chips, often
@@ -13,9 +11,10 @@ config MTD
          them. It will also allow you to select individual drivers for
          particular hardware and users of MTD devices. If unsure, say N.
 
+if MTD
+
 config MTD_DEBUG
        bool "Debugging"
-       depends on MTD
        help
          This turns on low-level debugging for the entire MTD sub-system.
          Normally, you should say 'N'.
@@ -29,7 +28,6 @@ config MTD_DEBUG_VERBOSE
 
 config MTD_CONCAT
        tristate "MTD concatenating support"
-       depends on MTD
        help
          Support for concatenating several MTD devices into a single
          (virtual) one. This allows you to have -for example- a JFFS(2)
@@ -38,7 +36,6 @@ config MTD_CONCAT
 
 config MTD_PARTITIONS
        bool "MTD partitioning support"
-       depends on MTD
        help
          If you have a device which needs to divide its flash chip(s) up
          into multiple 'partitions', each of which appears to the user as
@@ -153,11 +150,9 @@ config MTD_AFS_PARTS
          'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
 
 comment "User Modules And Translation Layers"
-       depends on MTD
 
 config MTD_CHAR
        tristate "Direct char device access to MTD devices"
-       depends on MTD
        help
          This provides a character device for each MTD device present in
          the system, allowing the user to read and write directly to the
@@ -166,12 +161,12 @@ config MTD_CHAR
 
 config MTD_BLKDEVS
        tristate "Common interface to block layer for MTD 'translation layers'"
-       depends on MTD && BLOCK
+       depends on BLOCK
        default n
 
 config MTD_BLOCK
        tristate "Caching block device access to MTD devices"
-       depends on MTD && BLOCK
+       depends on BLOCK
        select MTD_BLKDEVS
        ---help---
          Although most flash chips have an erase size too large to be useful
@@ -194,7 +189,7 @@ config MTD_BLOCK
 
 config MTD_BLOCK_RO
        tristate "Readonly block device access to MTD devices"
-       depends on MTD_BLOCK!=y && MTD && BLOCK
+       depends on MTD_BLOCK!=y && BLOCK
        select MTD_BLKDEVS
        help
          This allows you to mount read-only file systems (such as cramfs)
@@ -206,7 +201,7 @@ config MTD_BLOCK_RO
 
 config FTL
        tristate "FTL (Flash Translation Layer) support"
-       depends on MTD && BLOCK
+       depends on BLOCK
        select MTD_BLKDEVS
        ---help---
          This provides support for the original Flash Translation Layer which
@@ -223,7 +218,7 @@ config FTL
 
 config NFTL
        tristate "NFTL (NAND Flash Translation Layer) support"
-       depends on MTD && BLOCK
+       depends on BLOCK
        select MTD_BLKDEVS
        ---help---
          This provides support for the NAND Flash Translation Layer which is
@@ -247,7 +242,7 @@ config NFTL_RW
 
 config INFTL
        tristate "INFTL (Inverse NAND Flash Translation Layer) support"
-       depends on MTD && BLOCK
+       depends on BLOCK
        select MTD_BLKDEVS
        ---help---
          This provides support for the Inverse NAND Flash Translation
@@ -265,7 +260,7 @@ config INFTL
 
 config RFD_FTL
         tristate "Resident Flash Disk (Flash Translation Layer) support"
-       depends on MTD && BLOCK
+       depends on BLOCK
        select MTD_BLKDEVS
        ---help---
          This provides support for the flash translation layer known
@@ -276,7 +271,7 @@ config RFD_FTL
 
 config SSFDC
        tristate "NAND SSFDC (SmartMedia) read only translation layer"
-       depends on MTD && BLOCK
+       depends on BLOCK
        select MTD_BLKDEVS
        help
          This enables read only access to SmartMedia formatted NAND
@@ -292,5 +287,4 @@ source "drivers/mtd/nand/Kconfig"
 
 source "drivers/mtd/onenand/Kconfig"
 
-endmenu
-
+endif # MTD

diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig
index 72e6d73beb40d169ca324c36d97735fd34b248e3..d28e0fc85e12c2e0bad8810551b1a3a8a4cffd42 100644 (file)
--- a/drivers/mtd/chips/Kconfig
+++ b/drivers/mtd/chips/Kconfig
@@ -6,7 +6,6 @@ menu "RAM/ROM/Flash chip drivers"
 
 config MTD_CFI
        tristate "Detect flash chips by Common Flash Interface (CFI) probe"
-       depends on MTD
        select MTD_GEN_PROBE
        help
          The Common Flash Interface specification was developed by Intel,
@@ -18,7 +17,6 @@ config MTD_CFI
 
 config MTD_JEDECPROBE
        tristate "Detect non-CFI AMD/JEDEC-compatible flash chips"
-       depends on MTD
        select MTD_GEN_PROBE
        help
          This option enables JEDEC-style probing of flash chips which are not
@@ -213,21 +211,18 @@ config MTD_CFI_UTIL
 
 config MTD_RAM
        tristate "Support for RAM chips in bus mapping"
-       depends on MTD
        help
          This option enables basic support for RAM chips accessed through
          a bus mapping driver.
 
 config MTD_ROM
        tristate "Support for ROM chips in bus mapping"
-       depends on MTD
        help
          This option enables basic support for ROM chips accessed through
          a bus mapping driver.
 
 config MTD_ABSENT
        tristate "Support for absent chips in bus mapping"
-       depends on MTD
        help
          This option enables support for a dummy probing driver used to
          allocated placeholder MTD devices on systems that have socketed
@@ -237,7 +232,6 @@ config MTD_ABSENT
          with this driver will return -ENODEV upon access.
 
 config MTD_OBSOLETE_CHIPS
-       depends on MTD
        bool "Older (theoretically obsoleted now) drivers for non-CFI chips"
        help
          This option does not enable any code directly, but will allow you to
@@ -250,7 +244,7 @@ config MTD_OBSOLETE_CHIPS
 
 config MTD_AMDSTD
        tristate "AMD compatible flash chip support (non-CFI)"
-       depends on MTD && MTD_OBSOLETE_CHIPS && BROKEN
+       depends on MTD_OBSOLETE_CHIPS && BROKEN
        help
          This option enables support for flash chips using AMD-compatible
          commands, including some which are not CFI-compatible and hence
@@ -260,7 +254,7 @@ config MTD_AMDSTD
 
 config MTD_SHARP
        tristate "pre-CFI Sharp chip support"
-       depends on MTD && MTD_OBSOLETE_CHIPS
+       depends on MTD_OBSOLETE_CHIPS
        help
          This option enables support for flash chips using Sharp-compatible
          commands, including some which are not CFI-compatible and hence
@@ -268,7 +262,7 @@ config MTD_SHARP
 
 config MTD_JEDEC
        tristate "JEDEC device support"
-       depends on MTD && MTD_OBSOLETE_CHIPS && BROKEN
+       depends on MTD_OBSOLETE_CHIPS && BROKEN
        help
          Enable older JEDEC flash interface devices for self
          programming flash.  It is commonly used in older AMD chips.  It is

diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index bef0f0d2c28e8e038ca830954bccea7fabdc45f9..690c94236d7fb82de155b7f09ebe839ab910952e 100644 (file)
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -6,7 +6,7 @@ menu "Self-contained MTD device drivers"
 
 config MTD_PMC551
        tristate "Ramix PMC551 PCI Mezzanine RAM card support"
-       depends on MTD && PCI
+       depends on PCI
        ---help---
          This provides a MTD device driver for the Ramix PMC551 RAM PCI card
          from Ramix Inc. <http://www.ramix.com/products/memory/pmc551.html>.
@@ -40,7 +40,7 @@ config MTD_PMC551_DEBUG
 
 config MTD_MS02NV
        tristate "DEC MS02-NV NVRAM module support"
-       depends on MTD && MACH_DECSTATION
+       depends on MACH_DECSTATION
        help
          This is an MTD driver for the DEC's MS02-NV (54-20948-01) battery
          backed-up NVRAM module.  The module was originally meant as an NFS
@@ -54,7 +54,7 @@ config MTD_MS02NV
 
 config MTD_DATAFLASH
        tristate "Support for AT45xxx DataFlash"
-       depends on MTD && SPI_MASTER && EXPERIMENTAL
+       depends on SPI_MASTER && EXPERIMENTAL
        help
          This enables access to AT45xxx DataFlash chips, using SPI.
          Sometimes DataFlash chips are packaged inside MMC-format
@@ -70,7 +70,7 @@ config MTD_DATAFLASH26
 
 config MTD_M25P80
        tristate "Support for M25 SPI Flash"
-       depends on MTD && SPI_MASTER && EXPERIMENTAL
+       depends on SPI_MASTER && EXPERIMENTAL
        help
          This enables access to ST M25P80 and similar SPI flash chips,
          used for program and data storage.  Set up your spi devices
@@ -78,7 +78,6 @@ config MTD_M25P80
 
 config MTD_SLRAM
        tristate "Uncached system RAM"
-       depends on MTD
        help
          If your CPU cannot cache all of the physical memory in your machine,
          you can still use it for storage or swap by using this driver to
@@ -86,7 +85,6 @@ config MTD_SLRAM
 
 config MTD_PHRAM
        tristate "Physical system RAM"
-       depends on MTD
        help
          This is a re-implementation of the slram driver above.
 
@@ -96,7 +94,7 @@ config MTD_PHRAM
 
 config MTD_LART
        tristate "28F160xx flash driver for LART"
-       depends on SA1100_LART && MTD
+       depends on SA1100_LART
        help
          This enables the flash driver for LART. Please note that you do
          not need any mapping/chip driver for LART. This one does it all
@@ -104,7 +102,6 @@ config MTD_LART
 
 config MTD_MTDRAM
        tristate "Test driver using RAM"
-       depends on MTD
        help
          This enables a test MTD device driver which uses vmalloc() to
          provide storage.  You probably want to say 'N' unless you're
@@ -144,7 +141,7 @@ config MTDRAM_ABS_POS
 
 config MTD_BLOCK2MTD
        tristate "MTD using block device"
-       depends on MTD && BLOCK
+       depends on BLOCK
        help
          This driver allows a block device to appear as an MTD. It would
          generally be used in the following cases:
@@ -158,7 +155,6 @@ comment "Disk-On-Chip Device Drivers"
 
 config MTD_DOC2000
        tristate "M-Systems Disk-On-Chip 2000 and Millennium (DEPRECATED)"
-       depends on MTD
        select MTD_DOCPROBE
        select MTD_NAND_IDS
        ---help---
@@ -181,7 +177,6 @@ config MTD_DOC2000
 
 config MTD_DOC2001
        tristate "M-Systems Disk-On-Chip Millennium-only alternative driver (DEPRECATED)"
-       depends on MTD
        select MTD_DOCPROBE
        select MTD_NAND_IDS
        ---help---
@@ -203,7 +198,6 @@ config MTD_DOC2001
 
 config MTD_DOC2001PLUS
        tristate "M-Systems Disk-On-Chip Millennium Plus"
-       depends on MTD
        select MTD_DOCPROBE
        select MTD_NAND_IDS
        ---help---

diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 87158797a66fcc66671e4fe8be642e921425fe02..d990d8141ef5dab4337dd7be35d3dc836f8926f5 100644 (file)
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -6,7 +6,6 @@ menu "Mapping drivers for chip access"
 
 config MTD_COMPLEX_MAPPINGS
        bool "Support non-linear mappings of flash chips"
-       depends on MTD
        help
          This causes the chip drivers to allow for complicated
          paged mappings of flash chips.
@@ -550,7 +549,7 @@ config MTD_OMAP_NOR
 # This needs CFI or JEDEC, depending on the cards found.
 config MTD_PCI
        tristate "PCI MTD driver"
-       depends on MTD && PCI && MTD_COMPLEX_MAPPINGS
+       depends on PCI && MTD_COMPLEX_MAPPINGS
        help
          Mapping for accessing flash devices on add-in cards like the Intel XScale
          IQ80310 card, and the Intel EBSA285 card in blank ROM programming mode
@@ -560,7 +559,7 @@ config MTD_PCI
 
 config MTD_PCMCIA
        tristate "PCMCIA MTD driver"
-       depends on MTD && PCMCIA && MTD_COMPLEX_MAPPINGS && BROKEN
+       depends on PCMCIA && MTD_COMPLEX_MAPPINGS && BROKEN
        help
          Map driver for accessing PCMCIA linear flash memory cards. These
          cards are usually around 4-16MiB in size. This does not include
@@ -624,13 +623,12 @@ config MTD_BAST_MAXSIZE
 
 config MTD_SHARP_SL
        bool "ROM mapped on Sharp SL Series"
-       depends on MTD && ARCH_PXA
+       depends on ARCH_PXA
        help
          This enables access to the flash chip on the Sharp SL Series of PDAs.
 
 config MTD_PLATRAM
        tristate "Map driver for platform device RAM (mtd-ram)"
-       depends on MTD
        select MTD_RAM
        help
          Map driver for RAM areas described via the platform device

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 49cbf510cce142525c4e18da785f08006f9f172f..4e62afe0c0f3aeeea4aa6c3efbb8b0e68fd6fd9c 100644 (file)
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -1,10 +1,7 @@
 # drivers/mtd/nand/Kconfig
 # $Id: Kconfig,v 1.35 2005/11/07 11:14:30 gleixner Exp $
 
-menu "NAND Flash Device Drivers"
-       depends on MTD!=n
-
-config MTD_NAND
+menuconfig MTD_NAND
        tristate "NAND Device Support"
        depends on MTD
        select MTD_NAND_IDS
@@ -13,9 +10,10 @@ config MTD_NAND
          devices. For further information see
          <http://www.linux-mtd.infradead.org/doc/nand.html>.
 
+if MTD_NAND
+
 config MTD_NAND_VERIFY_WRITE
        bool "Verify NAND page writes"
-       depends on MTD_NAND
        help
          This adds an extra check when data is written to the flash. The
          NAND flash device internally checks only bits transitioning
@@ -25,7 +23,6 @@ config MTD_NAND_VERIFY_WRITE
 
 config MTD_NAND_ECC_SMC
        bool "NAND ECC Smart Media byte order"
-       depends on MTD_NAND
        default n
        help
          Software ECC according to the Smart Media Specification.
@@ -42,45 +39,45 @@ config MTD_NAND_MUSEUM_IDS
 
 config MTD_NAND_AUTCPU12
        tristate "SmartMediaCard on autronix autcpu12 board"
-       depends on MTD_NAND && ARCH_AUTCPU12
+       depends on ARCH_AUTCPU12
        help
          This enables the driver for the autronix autcpu12 board to
          access the SmartMediaCard.
 
 config MTD_NAND_EDB7312
        tristate "Support for Cirrus Logic EBD7312 evaluation board"
-       depends on MTD_NAND && ARCH_EDB7312
+       depends on ARCH_EDB7312
        help
          This enables the driver for the Cirrus Logic EBD7312 evaluation
          board to access the onboard NAND Flash.
 
 config MTD_NAND_H1900
        tristate "iPAQ H1900 flash"
-       depends on MTD_NAND && ARCH_PXA && MTD_PARTITIONS
+       depends on ARCH_PXA && MTD_PARTITIONS
        help
          This enables the driver for the iPAQ h1900 flash.
 
 config MTD_NAND_SPIA
        tristate "NAND Flash device on SPIA board"
-       depends on ARCH_P720T && MTD_NAND
+       depends on ARCH_P720T
        help
          If you had to ask, you don't have one. Say 'N'.
 
 config MTD_NAND_AMS_DELTA
        tristate "NAND Flash device on Amstrad E3"
-       depends on MACH_AMS_DELTA && MTD_NAND
+       depends on MACH_AMS_DELTA
        help
          Support for NAND flash on Amstrad E3 (Delta).
 
 config MTD_NAND_TOTO
        tristate "NAND Flash device on TOTO board"
-       depends on ARCH_OMAP && MTD_NAND && BROKEN
+       depends on ARCH_OMAP && BROKEN
        help
          Support for NAND flash on Texas Instruments Toto platform.
 
 config MTD_NAND_TS7250
        tristate "NAND Flash device on TS-7250 board"
-       depends on MACH_TS72XX && MTD_NAND
+       depends on MACH_TS72XX
        help
          Support for NAND flash on Technologic Systems TS-7250 platform.
 
@@ -89,14 +86,14 @@ config MTD_NAND_IDS
 
 config MTD_NAND_AU1550
        tristate "Au1550/1200 NAND support"
-       depends on (SOC_AU1200 || SOC_AU1550) && MTD_NAND
+       depends on SOC_AU1200 || SOC_AU1550
        help
          This enables the driver for the NAND flash controller on the
          AMD/Alchemy 1550 SOC.
 
 config MTD_NAND_RTC_FROM4
        tristate "Renesas Flash ROM 4-slot interface board (FROM_BOARD4)"
-       depends on MTD_NAND && SH_SOLUTION_ENGINE
+       depends on SH_SOLUTION_ENGINE
        select REED_SOLOMON
        select REED_SOLOMON_DEC8
        select BITREVERSE
@@ -106,13 +103,13 @@ config MTD_NAND_RTC_FROM4
 
 config MTD_NAND_PPCHAMELEONEVB
        tristate "NAND Flash device on PPChameleonEVB board"
-       depends on PPCHAMELEONEVB && MTD_NAND && BROKEN
+       depends on PPCHAMELEONEVB && BROKEN
        help
          This enables the NAND flash driver on the PPChameleon EVB Board.
 
 config MTD_NAND_S3C2410
        tristate "NAND Flash support for S3C2410/S3C2440 SoC"
-       depends on ARCH_S3C2410 && MTD_NAND
+       depends on ARCH_S3C2410
        help
          This enables the NAND flash controller on the S3C2410 and S3C2440
          SoCs
@@ -137,7 +134,7 @@ config MTD_NAND_S3C2410_HWECC
 
 config MTD_NAND_NDFC
        tristate "NDFC NanD Flash Controller"
-       depends on MTD_NAND && 44x
+       depends on 44x
        select MTD_NAND_ECC_SMC
        help
         NDFC Nand Flash Controllers are integrated in EP44x SoCs
@@ -154,7 +151,7 @@ config MTD_NAND_S3C2410_CLKSTOP
 
 config MTD_NAND_DISKONCHIP
        tristate "DiskOnChip 2000, Millennium and Millennium Plus (NAND reimplementation) (EXPERIMENTAL)"
-       depends on MTD_NAND && EXPERIMENTAL
+       depends on EXPERIMENTAL
        select REED_SOLOMON
        select REED_SOLOMON_DEC16
        help
@@ -224,11 +221,11 @@ config MTD_NAND_DISKONCHIP_BBTWRITE
 
 config MTD_NAND_SHARPSL
        tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)"
-       depends on MTD_NAND && ARCH_PXA
+       depends on ARCH_PXA
 
 config MTD_NAND_BASLER_EXCITE
        tristate  "Support for NAND Flash on Basler eXcite"
-       depends on MTD_NAND && BASLER_EXCITE
+       depends on BASLER_EXCITE
        help
           This enables the driver for the NAND flash device found on the
           Basler eXcite Smart Camera. If built as a module, the driver
@@ -236,14 +233,14 @@ config MTD_NAND_BASLER_EXCITE
 
 config MTD_NAND_CAFE
        tristate "NAND support for OLPC CAFÉ chip"
-       depends on MTD_NAND && PCI
+       depends on PCI
        help
         Use NAND flash attached to the CAFÉ chip designed for the $100
         laptop.
 
 config MTD_NAND_CS553X
        tristate "NAND support for CS5535/CS5536 (AMD Geode companion chip)"
-       depends on MTD_NAND && X86_32 && (X86_PC || X86_GENERICARCH)
+       depends on X86_32 && (X86_PC || X86_GENERICARCH)
        help
          The CS553x companion chips for the AMD Geode processor
          include NAND flash controllers with built-in hardware ECC
@@ -256,16 +253,16 @@ config MTD_NAND_CS553X
 
 config MTD_NAND_AT91
        bool "Support for NAND Flash / SmartMedia on AT91"
-       depends on MTD_NAND && ARCH_AT91
+       depends on ARCH_AT91
        help
          Enables support for NAND Flash / Smart Media Card interface
          on Atmel AT91 processors.
 
 config MTD_NAND_NANDSIM
        tristate "Support for NAND Flash Simulator"
-       depends on MTD_NAND && MTD_PARTITIONS
+       depends on MTD_PARTITIONS
        help
          The simulator may simulate various NAND flash chips for the
          MTD nand layer.
 
-endmenu
+endif # MTD_NAND

diff --git a/drivers/mtd/onenand/Kconfig b/drivers/mtd/onenand/Kconfig
index 373bddce8f1c661354c9f5b568db564f70ab142a..e1503912f69e21809d78d39268c3ae8a226c815e 100644 (file)
--- a/drivers/mtd/onenand/Kconfig
+++ b/drivers/mtd/onenand/Kconfig
@@ -2,10 +2,7 @@
 # linux/drivers/mtd/onenand/Kconfig
 #
 
-menu "OneNAND Flash Device Drivers"
-       depends on MTD != n
-
-config MTD_ONENAND
+menuconfig MTD_ONENAND
        tristate "OneNAND Device Support"
        depends on MTD
        help
@@ -13,9 +10,10 @@ config MTD_ONENAND
          devices. For further information see
          <http://www.samsung.com/Products/Semiconductor/Flash/OneNAND_TM/index.htm>.
 
+if MTD_ONENAND
+
 config MTD_ONENAND_VERIFY_WRITE
        bool "Verify OneNAND page writes"
-       depends on MTD_ONENAND
        help
          This adds an extra check when data is written to the flash. The
          OneNAND flash device internally checks only bits transitioning
@@ -25,13 +23,12 @@ config MTD_ONENAND_VERIFY_WRITE
 
 config MTD_ONENAND_GENERIC
        tristate "OneNAND Flash device via platform device driver"
-       depends on MTD_ONENAND && ARM
+       depends on ARM
        help
          Support for OneNAND flash via platform device driver.
 
 config MTD_ONENAND_OTP
        bool "OneNAND OTP Support"
-       depends on MTD_ONENAND
        help
          One Block of the NAND Flash Array memory is reserved as
          a One-Time Programmable Block memory area.
@@ -43,4 +40,4 @@ config MTD_ONENAND_OTP
 
          OTP block is fully-guaranteed to be a valid block.
 
-endmenu
+endif # MTD_ONENAND