Alex Wang alexw@nicira.com
Andrew Evans aevans@nicira.com
Andrew Lambeth wal@nicira.com
+Andy Hill hillad@gmail.com
Andy Southgate andy.southgate@citrix.com
Andy Zhou azhou@nicira.com
Ansis Atteka aatteka@nicira.com
On the receiving side, the packet arrives without the original MAC header.
The LISP tunneling code attaches a header with harcoded source and destination
-MAC addres 02:00:00:00:00:00. This address has all bits set to 0, except the
+MAC address 02:00:00:00:00:00. This address has all bits set to 0, except the
locally administered bit, in order to avoid potential collisions with existing
allocations. In order for packets to reach their intended destination, the
destination MAC address needs to be rewritten. This can be done using the
* @err_type: one of enum vport_err_type types to indicate the error type
*
* If using the vport generic stats layer indicate that an error of the given
- * type has occured.
+ * type has occurred.
*/
void ovs_vport_record_error(struct vport *vport, enum vport_err_type err_type)
{
bool check_tnl_key; /* Verify the tunnel key of inbound packets? */
bool extended; /* Extended mode. */
bool demand; /* Demand mode. */
- bool booted; /* A full fault interval has occured. */
+ bool booted; /* A full fault interval has occurred. */
enum cfm_fault_reason fault; /* Connectivity fault status. */
- enum cfm_fault_reason recv_fault; /* Bit mask of faults occuring on
+ enum cfm_fault_reason recv_fault; /* Bit mask of faults occurring on
receive. */
bool opup; /* Operational State. */
bool remote_opup; /* Remote Operational State. */
* anyhow. */
int (*add_router)(struct netdev *netdev, struct in_addr router);
- /* Looks up the next hop for 'host'. If succesful, stores the next hop
+ /* Looks up the next hop for 'host'. If successful, stores the next hop
* gateway's address (0 if 'host' is on a directly connected network) in
* '*next_hop' and a copy of the name of the device to reach 'host' in
* '*netdev_name', and returns 0. The caller is responsible for freeing
/* Passed in by nln_create(). */
int multicast_group; /* Multicast group we listen on. */
- int protocol; /* Protocal passed to nl_sock_create(). */
+ int protocol; /* Protocol passed to nl_sock_create(). */
nln_parse_func *parse; /* Message parsing function. */
void *change; /* Change passed to parse. */
};
strict, match, NULL, NULL);
}
-/* Parses the oxm formatted match description preceeded by a struct ofp11_match
+/* Parses the oxm formatted match description preceded by a struct ofp11_match
* in 'b' with length 'match_len'. Stores the result in 'match'.
*
* Fails with an error when encountering unknown OXM headers.
enum odp_key_fitness fitness;
ovs_be16 tci;
- /* Calulate fitness of outer attributes. */
+ /* Calculate fitness of outer attributes. */
expected_attrs |= ((UINT64_C(1) << OVS_KEY_ATTR_VLAN) |
(UINT64_C(1) << OVS_KEY_ATTR_ENCAP));
fitness = check_expectations(present_attrs, out_of_range_attr,
commit_vlan_action(flow, base, odp_actions);
commit_set_nw_action(flow, base, odp_actions);
commit_set_port_action(flow, base, odp_actions);
- /* Commiting MPLS actions should occur after committing nw and port
+ /* Committing MPLS actions should occur after committing nw and port
* actions. This is because committing MPLS actions may alter a packet so
* that it is no longer IP and thus nw and port actions are no longer valid.
*/
case STATE_SSL_CONNECTING:
/* Capture the first few bytes of received data so that we can guess
- * what kind of funny data we've been sent if SSL negotation fails. */
+ * what kind of funny data we've been sent if SSL negotiation fails. */
if (sslv->n_head <= 0) {
sslv->n_head = recv(sslv->fd, sslv->head, sizeof sslv->head,
MSG_PEEK);
*
* DEFAULT is the default value for the option. Specify 0 to disable the
* option by default, which should be the usual choice. But some options can
- * be left on at low levels without noticable impact to the end user. An
+ * be left on at low levels without noticeable impact to the end user. An
* example would be failing to allocate a buffer for every 100000th packet
* processed by the system.
*/
}
/* Replies to the active unixctl connection 'conn'. 'error' is sent to the
- * client indicating an error occured processing the command. Only one call to
+ * client indicating an error occurred processing the command. Only one call to
* unixctl_command_reply() or unixctl_command_reply_error() may be made per
* request. */
void
return retval;
}
-/* Waits until a message with a transaction ID matching 'xid' is recived on
+/* Waits until a message with a transaction ID matching 'xid' is received on
* 'vconn'. Returns 0 if successful, in which case the reply is stored in
* '*replyp' for the caller to examine and free. Otherwise returns a positive
* errno value, or EOF, and sets '*replyp' to null.
uint8_t engine_id; /* Value of engine_id to use. */
long long int boot_time; /* Time when netflow_create() was called. */
struct collectors *collectors; /* NetFlow collectors. */
- bool add_id_to_iface; /* Put the 7 least signficiant bits of
- * 'engine_id' into the most signficant
+ bool add_id_to_iface; /* Put the 7 least significiant bits of
+ * 'engine_id' into the most significant
* bits of the interface fields. */
uint32_t netflow_cnt; /* Flow sequence number for NetFlow. */
struct ofpbuf packet; /* NetFlow packet being accumulated. */
* flow keys with fitness ODP_FIT_TO_LITTLE. This breaks a fundamental
* assumption used throughout the facet and subfacet handling code.
* Since we have to handle these misses in userspace anyway, we simply
- * skip facet creation, avoiding the problem alltogether. */
+ * skip facet creation, avoiding the problem altogether. */
if (miss->key_fitness == ODP_FIT_TOO_LITTLE
|| !flow_miss_should_make_facet(ofproto, miss, hash)) {
handle_flow_miss_without_facet(miss, ops, n_ops);
* The "isRoot" member is included in the JSON only if its value would differ
* from 'default_is_root'. Ordinarily 'default_is_root' should be false,
* because ordinarily a table would be not be part of the root set if its
- * "isRoot" member is omitted. However, garbage collection was not orginally
+ * "isRoot" member is omitted. However, garbage collection was not originally
* included in OVSDB, so in older schemas that do not include any "isRoot"
* members, every table is implicitly part of the root set. To serialize such
* a schema in a way that can be read by older OVSDB tools, specify
new datum's value is taken from 'value', which must take the form
described as a valid return value from Datum.to_python() for 'type'.
- Each scalar value within 'value' is initally passed through
+ Each scalar value within 'value' is initially passed through
'row_to_uuid', which should convert objects that represent rows (if
any) into uuid.UUID objects and return other data unchanged.
differ from 'default_is_root'. Ordinarily 'default_is_root' should be
false, because ordinarily a table would be not be part of the root set
if its "isRoot" member is omitted. However, garbage collection was not
- orginally included in OVSDB, so in older schemas that do not include
+ originally included in OVSDB, so in older schemas that do not include
any "isRoot" members, every table is implicitly part of the root set.
To serialize such a schema in a way that can be read by older OVSDB
tools, specify 'default_is_root' as True.
Should assume any configuration files changed attached in
the preconfigure stage are applied and bring up the
- necesary devices to provide the datapath for the
+ necessary devices to provide the datapath for the
PIF.
Should not bring up the IPdev.
172.18.0.0/16 via 192.168.0.4 dev xenbr1
"""
if oc.has_key('static-routes'):
- # The key is present - extract comma seperates entries
+ # The key is present - extract comma separates entries
lines = oc['static-routes'].split(',')
else:
# The key is not present, i.e. there are no static routes
projects / mirror_ovs.git / commitdiff