usb: musb: omap2430: replace *_* with *-* in property names

No functional change. Replace *_* with *-* in property names of otg to
follow the general convention.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt
index 1b9f55fd96c03368fa56de77e0ae7ca03764e71a..662f0f1d23150b236bb9c5af15a376a0052afc39 100644 (file)
--- a/Documentation/devicetree/bindings/usb/omap-usb.txt
+++ b/Documentation/devicetree/bindings/usb/omap-usb.txt
@@ -8,10 +8,10 @@ OMAP MUSB GLUE
    and disconnect.
  - multipoint : Should be "1" indicating the musb controller supports
    multipoint. This is a MUSB configuration-specific setting.
- - num_eps : Specifies the number of endpoints. This is also a
+ - num-eps : Specifies the number of endpoints. This is also a
    MUSB configuration-specific setting. Should be set to "16"
- - ram_bits : Specifies the ram address size. Should be set to "12"
- - interface_type : This is a board specific setting to describe the type of
+ - ram-bits : Specifies the ram address size. Should be set to "12"
+ - interface-type : This is a board specific setting to describe the type of
    interface between the controller and the phy. It should be "0" or "1"
    specifying ULPI and UTMI respectively.
  - mode : Should be "3" to represent OTG. "1" signifies HOST and "2"
@@ -29,14 +29,14 @@ usb_otg_hs: usb_otg_hs@4a0ab000 {
        ti,hwmods = "usb_otg_hs";
        ti,has-mailbox;
        multipoint = <1>;
-       num_eps = <16>;
-       ram_bits = <12>;
+       num-eps = <16>;
+       ram-bits = <12>;
        ctrl-module = <&omap_control_usb>;
 };
 
 Board specific device node entry
 &usb_otg_hs {
-       interface_type = <1>;
+       interface-type = <1>;
        mode = <3>;
        power = <50>;
 };

diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 8ba9bb2a91a7d721655dea80822371cccb6df5b5..e7b5eae5a141a7ff08bd3d8a44633559b1efbe1f 100644 (file)
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -526,10 +526,10 @@ static int omap2430_probe(struct platform_device *pdev)
                }
 
                of_property_read_u32(np, "mode", (u32 *)&pdata->mode);
-               of_property_read_u32(np, "interface_type",
+               of_property_read_u32(np, "interface-type",
                                                (u32 *)&data->interface_type);
-               of_property_read_u32(np, "num_eps", (u32 *)&config->num_eps);
-               of_property_read_u32(np, "ram_bits", (u32 *)&config->ram_bits);
+               of_property_read_u32(np, "num-eps", (u32 *)&config->num_eps);
+               of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits);
                of_property_read_u32(np, "power", (u32 *)&pdata->power);
                config->multipoint = of_property_read_bool(np, "multipoint");
                pdata->has_mailbox = of_property_read_bool(np,