#include "../sysfs.h"
/* Accelerometer types of attribute */
-
#define IIO_DEV_ATTR_ACCEL_X_OFFSET(_mode, _show, _store, _addr) \
IIO_DEVICE_ATTR(accel_x_offset, _mode, _show, _store, _addr)
IIO_DEVICE_ATTR(accel_z_gain, _mode, _show, _store, _addr)
#define IIO_DEV_ATTR_ACCEL_X(_show, _addr) \
- IIO_DEVICE_ATTR(accel_x, S_IRUGO, _show, NULL, _addr)
+ IIO_DEVICE_ATTR(accel_x_raw, S_IRUGO, _show, NULL, _addr)
#define IIO_DEV_ATTR_ACCEL_Y(_show, _addr) \
- IIO_DEVICE_ATTR(accel_y, S_IRUGO, _show, NULL, _addr)
+ IIO_DEVICE_ATTR(accel_y_raw, S_IRUGO, _show, NULL, _addr)
#define IIO_DEV_ATTR_ACCEL_Z(_show, _addr) \
- IIO_DEVICE_ATTR(accel_z, S_IRUGO, _show, NULL, _addr)
+ IIO_DEVICE_ATTR(accel_z_raw, S_IRUGO, _show, NULL, _addr)
/* Thresholds are somewhat chip dependent - may need quite a few defs here */
/* For unified thresholds (shared across all directions */
#define IIO_DEV_ATTR_ACCEL_THRESH_Z(_mode, _show, _store, _addr) \
IIO_DEVICE_ATTR(thresh_accel_z, _mode, _show, _store, _addr)
-
/**
* IIO_EVENT_ATTR_ACCEL_X_HIGH: threshold event, x acceleration
* @_show: read x acceleration high threshold
#include <linux/rtc.h>
#include <linux/delay.h>
#include <linux/slab.h>
+#include <linux/string.h>
#include "../iio.h"
#include "../sysfs.h"
#define KXSD9_READ(a) (0x80 | (a))
#define KXSD9_WRITE(a) (a)
-#define IIO_DEV_ATTR_ACCEL_SET_RANGE(_mode, _show, _store) \
- IIO_DEVICE_ATTR(accel_range, _mode, _show, _store, 0)
+#define KXSD9_SCALE_2G "0.011978"
+#define KXSD9_SCALE_4G "0.023927"
+#define KXSD9_SCALE_6G "0.035934"
+#define KXSD9_SCALE_8G "0.047853"
#define KXSD9_STATE_RX_SIZE 2
#define KXSD9_STATE_TX_SIZE 4
};
/* This may want to move to mili g to allow for non integer ranges */
-static ssize_t kxsd9_read_accel_range(struct device *dev,
- struct device_attribute *attr,
- char *buf)
+static ssize_t kxsd9_read_scale(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
{
int ret;
ssize_t len = 0;
switch (st->rx[1] & KXSD9_FS_MASK) {
case KXSD9_FS_8:
- len += sprintf(buf, "8\n");
+ len += sprintf(buf, "%s\n", KXSD9_SCALE_8G);
break;
case KXSD9_FS_6:
- len += sprintf(buf, "6\n");
+ len += sprintf(buf, "%s\n", KXSD9_SCALE_6G);
break;
case KXSD9_FS_4:
- len += sprintf(buf, "4\n");
+ len += sprintf(buf, "%s\n", KXSD9_SCALE_4G);
break;
case KXSD9_FS_2:
- len += sprintf(buf, "2\n");
+ len += sprintf(buf, "%s\n", KXSD9_SCALE_2G);
break;
}
return ret ? ret : len;
}
-static ssize_t kxsd9_write_accel_range(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t len)
+static ssize_t kxsd9_write_scale(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t len)
{
- long readin;
+
struct spi_message msg;
int ret;
struct iio_dev *indio_dev = dev_get_drvdata(dev);
},
};
- ret = strict_strtol(buf, 10, &readin);
- if (ret)
- return ret;
- switch (readin) {
- case 8:
+ if (!strncmp(buf, KXSD9_SCALE_8G,
+ strlen(buf) < strlen(KXSD9_SCALE_8G)
+ ? strlen(buf) : strlen(KXSD9_SCALE_8G)))
val = KXSD9_FS_8;
- break;
- case 6:
+ else if (!strncmp(buf, KXSD9_SCALE_6G,
+ strlen(buf) < strlen(KXSD9_SCALE_6G)
+ ? strlen(buf) : strlen(KXSD9_SCALE_6G)))
val = KXSD9_FS_6;
- break;
- case 4:
+ else if (!strncmp(buf, KXSD9_SCALE_4G,
+ strlen(buf) < strlen(KXSD9_SCALE_4G)
+ ? strlen(buf) : strlen(KXSD9_SCALE_4G)))
val = KXSD9_FS_4;
- break;
- case 2:
+ else if (!strncmp(buf, KXSD9_SCALE_2G,
+ strlen(buf) < strlen(KXSD9_SCALE_2G)
+ ? strlen(buf) : strlen(KXSD9_SCALE_2G)))
val = KXSD9_FS_2;
- break;
- default:
+ else
return -EINVAL;
- }
+
mutex_lock(&st->buf_lock);
st->tx[0] = KXSD9_READ(KXSD9_REG_CTRL_C);
st->tx[1] = 0;
mutex_unlock(&st->buf_lock);
return ret ? ret : len;
}
+
static ssize_t kxsd9_read_accel(struct device *dev,
struct device_attribute *attr,
char *buf)
static IIO_DEV_ATTR_ACCEL_X(kxsd9_read_accel, KXSD9_REG_X);
static IIO_DEV_ATTR_ACCEL_Y(kxsd9_read_accel, KXSD9_REG_Y);
static IIO_DEV_ATTR_ACCEL_Z(kxsd9_read_accel, KXSD9_REG_Z);
-static IIO_DEV_ATTR_ADC(0, kxsd9_read_accel, KXSD9_REG_AUX);
-static IIO_DEV_ATTR_ACCEL_SET_RANGE(S_IRUGO | S_IWUSR,
- kxsd9_read_accel_range,
- kxsd9_write_accel_range);
+static IIO_DEV_ATTR_IN_RAW(0, kxsd9_read_accel, KXSD9_REG_AUX);
+
+static IIO_DEVICE_ATTR(accel_scale,
+ S_IRUGO | S_IWUSR,
+ kxsd9_read_scale,
+ kxsd9_write_scale,
+ 0);
+
+static IIO_CONST_ATTR(accel_scale_available,
+ KXSD9_SCALE_2G " "
+ KXSD9_SCALE_4G " "
+ KXSD9_SCALE_6G " "
+ KXSD9_SCALE_8G);
static struct attribute *kxsd9_attributes[] = {
- &iio_dev_attr_accel_x.dev_attr.attr,
- &iio_dev_attr_accel_y.dev_attr.attr,
- &iio_dev_attr_accel_z.dev_attr.attr,
- &iio_dev_attr_adc_0.dev_attr.attr,
- &iio_dev_attr_accel_range.dev_attr.attr,
+ &iio_dev_attr_accel_x_raw.dev_attr.attr,
+ &iio_dev_attr_accel_y_raw.dev_attr.attr,
+ &iio_dev_attr_accel_z_raw.dev_attr.attr,
+ &iio_dev_attr_in0_raw.dev_attr.attr,
+ &iio_dev_attr_accel_scale.dev_attr.attr,
+ &iio_const_attr_accel_scale_available.dev_attr.attr,
NULL,
};
int lis3l02dq_spi_write_reg_8(struct device *dev,
u8 reg_address,
u8 *val);
-#define LIS3L02DQ_SCAN_ACC_X 0
-#define LIS3L02DQ_SCAN_ACC_Y 1
-#define LIS3L02DQ_SCAN_ACC_Z 2
-
#ifdef CONFIG_IIO_RING_BUFFER
/* At the moment triggers are only used for ring buffer
return ret;
}
-static IIO_DEV_ATTR_ACCEL_X_OFFSET(S_IWUSR | S_IRUGO,
- lis3l02dq_read_signed,
- lis3l02dq_write_signed,
- LIS3L02DQ_REG_OFFSET_X_ADDR);
-
-static IIO_DEV_ATTR_ACCEL_Y_OFFSET(S_IWUSR | S_IRUGO,
- lis3l02dq_read_signed,
- lis3l02dq_write_signed,
- LIS3L02DQ_REG_OFFSET_Y_ADDR);
-
-static IIO_DEV_ATTR_ACCEL_Z_OFFSET(S_IWUSR | S_IRUGO,
- lis3l02dq_read_signed,
- lis3l02dq_write_signed,
- LIS3L02DQ_REG_OFFSET_Z_ADDR);
-
-static IIO_DEV_ATTR_ACCEL_X_GAIN(S_IWUSR | S_IRUGO,
- lis3l02dq_read_unsigned,
- lis3l02dq_write_unsigned,
- LIS3L02DQ_REG_GAIN_X_ADDR);
-
-static IIO_DEV_ATTR_ACCEL_Y_GAIN(S_IWUSR | S_IRUGO,
- lis3l02dq_read_unsigned,
- lis3l02dq_write_unsigned,
- LIS3L02DQ_REG_GAIN_Y_ADDR);
-
-static IIO_DEV_ATTR_ACCEL_Z_GAIN(S_IWUSR | S_IRUGO,
- lis3l02dq_read_unsigned,
- lis3l02dq_write_unsigned,
- LIS3L02DQ_REG_GAIN_Z_ADDR);
-
-static IIO_DEV_ATTR_ACCEL_THRESH(S_IWUSR | S_IRUGO,
- lis3l02dq_read_16bit_signed,
- lis3l02dq_write_16bit_signed,
- LIS3L02DQ_REG_THS_L_ADDR);
-
+#define LIS3L02DQ_SIGNED_ATTR(name, reg) \
+ IIO_DEVICE_ATTR(name, \
+ S_IWUSR | S_IRUGO, \
+ lis3l02dq_read_signed, \
+ lis3l02dq_write_signed, \
+ reg);
+
+#define LIS3L02DQ_UNSIGNED_ATTR(name, reg) \
+ IIO_DEVICE_ATTR(name, \
+ S_IWUSR | S_IRUGO, \
+ lis3l02dq_read_unsigned, \
+ lis3l02dq_write_unsigned, \
+ reg);
+
+static LIS3L02DQ_SIGNED_ATTR(accel_x_calibbias,
+ LIS3L02DQ_REG_OFFSET_X_ADDR);
+static LIS3L02DQ_SIGNED_ATTR(accel_y_calibbias,
+ LIS3L02DQ_REG_OFFSET_Y_ADDR);
+static LIS3L02DQ_SIGNED_ATTR(accel_z_calibbias,
+ LIS3L02DQ_REG_OFFSET_Z_ADDR);
+
+static LIS3L02DQ_UNSIGNED_ATTR(accel_x_calibscale,
+ LIS3L02DQ_REG_GAIN_X_ADDR);
+static LIS3L02DQ_UNSIGNED_ATTR(accel_y_calibscale,
+ LIS3L02DQ_REG_GAIN_Y_ADDR);
+static LIS3L02DQ_UNSIGNED_ATTR(accel_z_calibscale,
+ LIS3L02DQ_REG_GAIN_Z_ADDR);
+
+static IIO_DEVICE_ATTR(accel_mag_either_rising_value,
+ S_IWUSR | S_IRUGO,
+ lis3l02dq_read_16bit_signed,
+ lis3l02dq_write_16bit_signed,
+ LIS3L02DQ_REG_THS_L_ADDR);
/* RFC The reading method for these will change depending on whether
* ring buffer capture is in use. Is it worth making these take two
* functions and let the core handle which to call, or leave as in this
lis3l02dq_read_frequency,
lis3l02dq_write_frequency);
-static IIO_CONST_ATTR_AVAIL_SAMP_FREQ("280 560 1120 4480");
+static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("280 560 1120 4480");
static ssize_t lis3l02dq_read_interrupt_config(struct device *dev,
struct device_attribute *attr,
s8 val;
struct iio_event_attr *this_attr = to_iio_event_attr(attr);
- ret = lis3l02dq_spi_read_reg_8(dev,
+ ret = lis3l02dq_spi_read_reg_8(dev->parent,
LIS3L02DQ_REG_WAKE_UP_CFG_ADDR,
(u8 *)&val);
mutex_lock(&indio_dev->mlock);
/* read current value */
- ret = lis3l02dq_spi_read_reg_8(dev,
+ ret = lis3l02dq_spi_read_reg_8(dev->parent,
LIS3L02DQ_REG_WAKE_UP_CFG_ADDR,
&valold);
if (ret)
static void lis3l02dq_thresh_handler_bh_no_check(struct work_struct *work_s)
{
struct iio_work_cont *wc
- = container_of(work_s, struct iio_work_cont, ws_nocheck);
+ = container_of(work_s, struct iio_work_cont, ws);
struct lis3l02dq_state *st = wc->st;
u8 t;
/* A shared handler for a number of threshold types */
IIO_EVENT_SH(threshold, &lis3l02dq_thresh_handler_th);
-IIO_EVENT_ATTR_ACCEL_X_HIGH_SH(iio_event_threshold,
- lis3l02dq_read_interrupt_config,
- lis3l02dq_write_interrupt_config,
- LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_X_HIGH);
-
-IIO_EVENT_ATTR_ACCEL_Y_HIGH_SH(iio_event_threshold,
- lis3l02dq_read_interrupt_config,
- lis3l02dq_write_interrupt_config,
- LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_Y_HIGH);
-
-IIO_EVENT_ATTR_ACCEL_Z_HIGH_SH(iio_event_threshold,
- lis3l02dq_read_interrupt_config,
- lis3l02dq_write_interrupt_config,
- LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_Z_HIGH);
-
-IIO_EVENT_ATTR_ACCEL_X_LOW_SH(iio_event_threshold,
- lis3l02dq_read_interrupt_config,
- lis3l02dq_write_interrupt_config,
- LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_X_LOW);
-
-IIO_EVENT_ATTR_ACCEL_Y_LOW_SH(iio_event_threshold,
- lis3l02dq_read_interrupt_config,
- lis3l02dq_write_interrupt_config,
- LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_Y_LOW);
+IIO_EVENT_ATTR_SH(accel_x_mag_pos_rising_en,
+ iio_event_threshold,
+ lis3l02dq_read_interrupt_config,
+ lis3l02dq_write_interrupt_config,
+ LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_X_HIGH);
+
+IIO_EVENT_ATTR_SH(accel_y_mag_pos_rising_en,
+ iio_event_threshold,
+ lis3l02dq_read_interrupt_config,
+ lis3l02dq_write_interrupt_config,
+ LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_Y_HIGH);
+
+IIO_EVENT_ATTR_SH(accel_z_mag_pos_rising_en,
+ iio_event_threshold,
+ lis3l02dq_read_interrupt_config,
+ lis3l02dq_write_interrupt_config,
+ LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_Z_HIGH);
+
+IIO_EVENT_ATTR_SH(accel_x_mag_neg_rising_en,
+ iio_event_threshold,
+ lis3l02dq_read_interrupt_config,
+ lis3l02dq_write_interrupt_config,
+ LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_X_LOW);
+
+IIO_EVENT_ATTR_SH(accel_y_mag_neg_rising_en,
+ iio_event_threshold,
+ lis3l02dq_read_interrupt_config,
+ lis3l02dq_write_interrupt_config,
+ LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_Y_LOW);
+
+IIO_EVENT_ATTR_SH(accel_z_mag_neg_rising_en,
+ iio_event_threshold,
+ lis3l02dq_read_interrupt_config,
+ lis3l02dq_write_interrupt_config,
+ LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_Z_LOW);
-IIO_EVENT_ATTR_ACCEL_Z_LOW_SH(iio_event_threshold,
- lis3l02dq_read_interrupt_config,
- lis3l02dq_write_interrupt_config,
- LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_Z_LOW);
static struct attribute *lis3l02dq_event_attributes[] = {
- &iio_event_attr_accel_x_high.dev_attr.attr,
- &iio_event_attr_accel_y_high.dev_attr.attr,
- &iio_event_attr_accel_z_high.dev_attr.attr,
- &iio_event_attr_accel_x_low.dev_attr.attr,
- &iio_event_attr_accel_y_low.dev_attr.attr,
- &iio_event_attr_accel_z_low.dev_attr.attr,
+ &iio_event_attr_accel_x_mag_pos_rising_en.dev_attr.attr,
+ &iio_event_attr_accel_y_mag_pos_rising_en.dev_attr.attr,
+ &iio_event_attr_accel_z_mag_pos_rising_en.dev_attr.attr,
+ &iio_event_attr_accel_x_mag_neg_rising_en.dev_attr.attr,
+ &iio_event_attr_accel_y_mag_neg_rising_en.dev_attr.attr,
+ &iio_event_attr_accel_z_mag_neg_rising_en.dev_attr.attr,
+ &iio_dev_attr_accel_mag_either_rising_value.dev_attr.attr,
NULL
};
};
static IIO_CONST_ATTR(name, "lis3l02dq");
+static IIO_CONST_ATTR(accel_scale, "0.00958");
static struct attribute *lis3l02dq_attributes[] = {
- &iio_dev_attr_accel_x_offset.dev_attr.attr,
- &iio_dev_attr_accel_y_offset.dev_attr.attr,
- &iio_dev_attr_accel_z_offset.dev_attr.attr,
- &iio_dev_attr_accel_x_gain.dev_attr.attr,
- &iio_dev_attr_accel_y_gain.dev_attr.attr,
- &iio_dev_attr_accel_z_gain.dev_attr.attr,
- &iio_dev_attr_thresh.dev_attr.attr,
- &iio_dev_attr_accel_x.dev_attr.attr,
- &iio_dev_attr_accel_y.dev_attr.attr,
- &iio_dev_attr_accel_z.dev_attr.attr,
+ &iio_dev_attr_accel_x_calibbias.dev_attr.attr,
+ &iio_dev_attr_accel_y_calibbias.dev_attr.attr,
+ &iio_dev_attr_accel_z_calibbias.dev_attr.attr,
+ &iio_dev_attr_accel_x_calibscale.dev_attr.attr,
+ &iio_dev_attr_accel_y_calibscale.dev_attr.attr,
+ &iio_dev_attr_accel_z_calibscale.dev_attr.attr,
+ &iio_const_attr_accel_scale.dev_attr.attr,
+ &iio_dev_attr_accel_x_raw.dev_attr.attr,
+ &iio_dev_attr_accel_y_raw.dev_attr.attr,
+ &iio_dev_attr_accel_z_raw.dev_attr.attr,
&iio_dev_attr_sampling_frequency.dev_attr.attr,
- &iio_const_attr_available_sampling_frequency.dev_attr.attr,
+ &iio_const_attr_sampling_frequency_available.dev_attr.attr,
&iio_const_attr_name.dev_attr.attr,
NULL
};
return ret;
}
-static IIO_SCAN_EL_C(accel_x, LIS3L02DQ_SCAN_ACC_X, IIO_SIGNED(16),
+static IIO_SCAN_EL_C(accel_x, 0, IIO_SIGNED(16),
LIS3L02DQ_REG_OUT_X_L_ADDR,
&lis3l02dq_scan_el_set_state);
-static IIO_SCAN_EL_C(accel_y, LIS3L02DQ_SCAN_ACC_Y, IIO_SIGNED(16),
+static IIO_SCAN_EL_C(accel_y, 1, IIO_SIGNED(16),
LIS3L02DQ_REG_OUT_Y_L_ADDR,
&lis3l02dq_scan_el_set_state);
-static IIO_SCAN_EL_C(accel_z, LIS3L02DQ_SCAN_ACC_Z, IIO_SIGNED(16),
+static IIO_SCAN_EL_C(accel_z, 2, IIO_SIGNED(16),
LIS3L02DQ_REG_OUT_Z_L_ADDR,
&lis3l02dq_scan_el_set_state);
-static IIO_SCAN_EL_TIMESTAMP;
+static IIO_SCAN_EL_TIMESTAMP(3);
static struct attribute *lis3l02dq_scan_el_attrs[] = {
&iio_scan_el_accel_x.dev_attr.attr,
/**
* struct sca3000_chip_info - model dependant parameters
* @name: model identification
+ * @scale: string containing floating point scale factor
* @temp_output: some devices have temperature sensors.
* @measurement_mode_freq: normal mode sampling frequency
* @option_mode_1: first optional mode. Not all models have one
**/
struct sca3000_chip_info {
const char *name;
+ const char *scale;
bool temp_output;
int measurement_mode_freq;
int option_mode_1;
enum sca3000_variant {
d01,
- d03,
e02,
e04,
e05,
- l01,
};
/* Note where option modes are not defined, the chip simply does not
static const struct sca3000_chip_info sca3000_spi_chip_info_tbl[] = {
{
.name = "sca3000-d01",
+ .scale = " 0.0073575",
.temp_output = true,
.measurement_mode_freq = 250,
.option_mode_1 = SCA3000_OP_MODE_BYPASS,
.option_mode_1_freq = 250,
- }, {
- /* No data sheet available - may be the same as the 3100-d03?*/
- .name = "sca3000-d03",
- .temp_output = true,
}, {
.name = "sca3000-e02",
+ .scale = "0.00981",
.measurement_mode_freq = 125,
.option_mode_1 = SCA3000_OP_MODE_NARROW,
.option_mode_1_freq = 63,
}, {
.name = "sca3000-e04",
+ .scale = "0.01962",
.measurement_mode_freq = 100,
.option_mode_1 = SCA3000_OP_MODE_NARROW,
.option_mode_1_freq = 50,
.option_mode_2_freq = 400,
}, {
.name = "sca3000-e05",
+ .scale = "0.0613125",
.measurement_mode_freq = 200,
.option_mode_1 = SCA3000_OP_MODE_NARROW,
.option_mode_1_freq = 50,
.option_mode_2 = SCA3000_OP_MODE_WIDE,
.option_mode_2_freq = 400,
- }, {
- /* No data sheet available.
- * Frequencies are unknown.
- */
- .name = "sca3000-l01",
- .temp_output = true,
- .option_mode_1 = SCA3000_OP_MODE_BYPASS,
},
};
return ret ? ret : len;
}
+static ssize_t sca3000_show_scale(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct iio_dev *dev_info = dev_get_drvdata(dev);
+ struct sca3000_state *st = dev_info->dev_data;
+ return sprintf(buf, "%s\n", st->info->scale);
+}
static ssize_t sca3000_show_name(struct device *dev,
struct device_attribute *attr,
/* Not even vaguely standard attributes so defined here rather than
* in the relevant IIO core headers
*/
-static IIO_DEVICE_ATTR(available_measurement_modes, S_IRUGO,
+static IIO_DEVICE_ATTR(measurement_mode_available, S_IRUGO,
sca3000_show_available_measurement_modes,
NULL, 0);
static IIO_DEV_ATTR_NAME(sca3000_show_name);
static IIO_DEV_ATTR_REV(sca3000_show_rev);
+static IIO_DEVICE_ATTR(accel_scale, S_IRUGO, sca3000_show_scale,
+ NULL, 0);
static IIO_DEV_ATTR_ACCEL_X(sca3000_read_13bit_signed,
SCA3000_REG_ADDR_X_MSB);
/* Should only really be registered if ring buffer support is compiled in.
* Does no harm however and doing it right would add a fair bit of complexity
*/
-static IIO_DEV_ATTR_AVAIL_SAMP_FREQ(sca3000_read_av_freq);
+static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(sca3000_read_av_freq);
static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
sca3000_read_frequency,
error_ret:
return ret;
}
-static IIO_DEV_ATTR_TEMP(sca3000_read_temp);
+static IIO_DEV_ATTR_TEMP_RAW(sca3000_read_temp);
+
+static IIO_CONST_ATTR(temp_scale, "0.555556");
+static IIO_CONST_ATTR(temp_offset, "-214.6");
/**
* sca3000_show_thresh() sysfs query of a threshold
return ret ? ret : len;
}
-static IIO_DEV_ATTR_ACCEL_THRESH_X(S_IRUGO | S_IWUSR,
- sca3000_show_thresh,
- sca3000_write_thresh,
- SCA3000_REG_CTRL_SEL_MD_X_TH);
-static IIO_DEV_ATTR_ACCEL_THRESH_Y(S_IRUGO | S_IWUSR,
- sca3000_show_thresh,
- sca3000_write_thresh,
- SCA3000_REG_CTRL_SEL_MD_Y_TH);
-static IIO_DEV_ATTR_ACCEL_THRESH_Z(S_IRUGO | S_IWUSR,
- sca3000_show_thresh,
- sca3000_write_thresh,
- SCA3000_REG_CTRL_SEL_MD_Z_TH);
+static IIO_DEVICE_ATTR(accel_x_mag_either_rising_value,
+ S_IRUGO | S_IWUSR,
+ sca3000_show_thresh,
+ sca3000_write_thresh,
+ SCA3000_REG_CTRL_SEL_MD_X_TH);
+
+static IIO_DEVICE_ATTR(accel_y_mag_either_rising_value,
+ S_IRUGO | S_IWUSR,
+ sca3000_show_thresh,
+ sca3000_write_thresh,
+ SCA3000_REG_CTRL_SEL_MD_Y_TH);
+
+static IIO_DEVICE_ATTR(accel_z_mag_either_rising_value,
+ S_IRUGO | S_IWUSR,
+ sca3000_show_thresh,
+ sca3000_write_thresh,
+ SCA3000_REG_CTRL_SEL_MD_Z_TH);
static struct attribute *sca3000_attributes[] = {
&iio_dev_attr_name.dev_attr.attr,
&iio_dev_attr_revision.dev_attr.attr,
- &iio_dev_attr_accel_x.dev_attr.attr,
- &iio_dev_attr_accel_y.dev_attr.attr,
- &iio_dev_attr_accel_z.dev_attr.attr,
- &iio_dev_attr_thresh_accel_x.dev_attr.attr,
- &iio_dev_attr_thresh_accel_y.dev_attr.attr,
- &iio_dev_attr_thresh_accel_z.dev_attr.attr,
- &iio_dev_attr_available_measurement_modes.dev_attr.attr,
+ &iio_dev_attr_accel_scale.dev_attr.attr,
+ &iio_dev_attr_accel_x_raw.dev_attr.attr,
+ &iio_dev_attr_accel_y_raw.dev_attr.attr,
+ &iio_dev_attr_accel_z_raw.dev_attr.attr,
+ &iio_dev_attr_measurement_mode_available.dev_attr.attr,
&iio_dev_attr_measurement_mode.dev_attr.attr,
- &iio_dev_attr_available_sampling_frequency.dev_attr.attr,
+ &iio_dev_attr_sampling_frequency_available.dev_attr.attr,
&iio_dev_attr_sampling_frequency.dev_attr.attr,
NULL,
};
static struct attribute *sca3000_attributes_with_temp[] = {
&iio_dev_attr_name.dev_attr.attr,
&iio_dev_attr_revision.dev_attr.attr,
- &iio_dev_attr_accel_x.dev_attr.attr,
- &iio_dev_attr_accel_y.dev_attr.attr,
- &iio_dev_attr_accel_z.dev_attr.attr,
- &iio_dev_attr_thresh_accel_x.dev_attr.attr,
- &iio_dev_attr_thresh_accel_y.dev_attr.attr,
- &iio_dev_attr_thresh_accel_z.dev_attr.attr,
- &iio_dev_attr_available_measurement_modes.dev_attr.attr,
+ &iio_dev_attr_accel_scale.dev_attr.attr,
+ &iio_dev_attr_accel_x_raw.dev_attr.attr,
+ &iio_dev_attr_accel_y_raw.dev_attr.attr,
+ &iio_dev_attr_accel_z_raw.dev_attr.attr,
+ &iio_dev_attr_measurement_mode_available.dev_attr.attr,
&iio_dev_attr_measurement_mode.dev_attr.attr,
- &iio_dev_attr_available_sampling_frequency.dev_attr.attr,
+ &iio_dev_attr_sampling_frequency_available.dev_attr.attr,
&iio_dev_attr_sampling_frequency.dev_attr.attr,
/* Only present if temp sensor is */
- &iio_dev_attr_temp.dev_attr.attr,
+ &iio_dev_attr_temp_raw.dev_attr.attr,
+ &iio_const_attr_temp_offset.dev_attr.attr,
+ &iio_const_attr_temp_scale.dev_attr.attr,
NULL,
};
struct device_attribute *attr,
char *buf)
{
- struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct iio_dev *indio_dev = dev_get_drvdata(dev->parent);
struct sca3000_state *st = indio_dev->dev_data;
struct iio_event_attr *this_attr = to_iio_event_attr(attr);
int ret, len = 0;
struct iio_event_attr *this_attr = to_iio_event_attr(attr);
int ret, len;
u8 *rx;
- struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct iio_dev *indio_dev = dev_get_drvdata(dev->parent);
struct sca3000_state *st = indio_dev->dev_data;
mutex_lock(&st->lock);
ret = sca3000_read_data(st, SCA3000_REG_ADDR_INT_MASK, &rx, 1);
const char *buf,
size_t len)
{
- struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct iio_dev *indio_dev = dev_get_drvdata(dev->parent);
struct sca3000_state *st = indio_dev->dev_data;
struct iio_event_attr *this_attr = to_iio_event_attr(attr);
const char *buf,
size_t len)
{
- struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct iio_dev *indio_dev = dev_get_drvdata(dev->parent);
struct sca3000_state *st = indio_dev->dev_data;
struct iio_event_attr *this_attr = to_iio_event_attr(attr);
long val;
0)
/* Motion detector related event attributes */
-IIO_EVENT_ATTR_ACCEL_X_HIGH_SH(iio_event_all,
- sca3000_query_mo_det,
- sca3000_set_mo_det,
- SCA3000_MD_CTRL_OR_X);
-
-IIO_EVENT_ATTR_ACCEL_Y_HIGH_SH(iio_event_all,
- sca3000_query_mo_det,
- sca3000_set_mo_det,
- SCA3000_MD_CTRL_OR_Y);
-
-IIO_EVENT_ATTR_ACCEL_Z_HIGH_SH(iio_event_all,
- sca3000_query_mo_det,
- sca3000_set_mo_det,
- SCA3000_MD_CTRL_OR_Z);
+IIO_EVENT_ATTR_SH(accel_x_mag_either_rising_en,
+ iio_event_all,
+ sca3000_query_mo_det,
+ sca3000_set_mo_det,
+ SCA3000_MD_CTRL_OR_X);
+
+IIO_EVENT_ATTR_SH(accel_y_mag_either_rising_en,
+ iio_event_all,
+ sca3000_query_mo_det,
+ sca3000_set_mo_det,
+ SCA3000_MD_CTRL_OR_Y);
+
+IIO_EVENT_ATTR_SH(accel_z_mag_either_rising_en,
+ iio_event_all,
+ sca3000_query_mo_det,
+ sca3000_set_mo_det,
+ SCA3000_MD_CTRL_OR_Z);
/* Hardware ring buffer related event attributes */
IIO_EVENT_ATTR_RING_50_FULL_SH(iio_event_all,
static struct attribute *sca3000_event_attributes[] = {
&iio_event_attr_free_fall.dev_attr.attr,
- &iio_event_attr_accel_x_high.dev_attr.attr,
- &iio_event_attr_accel_y_high.dev_attr.attr,
- &iio_event_attr_accel_z_high.dev_attr.attr,
+ &iio_event_attr_accel_x_mag_either_rising_en.dev_attr.attr,
+ &iio_event_attr_accel_y_mag_either_rising_en.dev_attr.attr,
+ &iio_event_attr_accel_z_mag_either_rising_en.dev_attr.attr,
&iio_event_attr_ring_50_full.dev_attr.attr,
&iio_event_attr_ring_75_full.dev_attr.attr,
+ &iio_dev_attr_accel_x_mag_either_rising_value.dev_attr.attr,
+ &iio_dev_attr_accel_y_mag_either_rising_value.dev_attr.attr,
+ &iio_dev_attr_accel_z_mag_either_rising_value.dev_attr.attr,
NULL,
};
* is overkill. At very least a simpler registration method
* might be worthwhile.
*/
- iio_add_event_to_list(iio_event_attr_accel_z_high.listel,
- &st->indio_dev
- ->interrupts[0]->ev_list);
+ iio_add_event_to_list(
+ iio_event_attr_accel_z_mag_either_rising_en.listel,
+ &st->indio_dev
+ ->interrupts[0]->ev_list);
}
sca3000_register_ring_funcs(st->indio_dev);
ret = sca3000_clean_setup(st);
SCA3000_VARIANT_PROBE(d01);
static SCA3000_VARIANT_SPI_DRIVER(d01);
-SCA3000_VARIANT_PROBE(d03);
-static SCA3000_VARIANT_SPI_DRIVER(d03);
-
SCA3000_VARIANT_PROBE(e02);
static SCA3000_VARIANT_SPI_DRIVER(e02);
SCA3000_VARIANT_PROBE(e05);
static SCA3000_VARIANT_SPI_DRIVER(e05);
-SCA3000_VARIANT_PROBE(l01);
-static SCA3000_VARIANT_SPI_DRIVER(l01);
-
static __init int sca3000_init(void)
{
int ret;
ret = spi_register_driver(&sca3000_d01_driver);
if (ret)
goto error_ret;
- ret = spi_register_driver(&sca3000_d03_driver);
- if (ret)
- goto error_unreg_d01;
ret = spi_register_driver(&sca3000_e02_driver);
if (ret)
- goto error_unreg_d03;
+ goto error_unreg_d01;
ret = spi_register_driver(&sca3000_e04_driver);
if (ret)
goto error_unreg_e02;
ret = spi_register_driver(&sca3000_e05_driver);
if (ret)
goto error_unreg_e04;
- ret = spi_register_driver(&sca3000_l01_driver);
- if (ret)
- goto error_unreg_e05;
return 0;
-error_unreg_e05:
- spi_unregister_driver(&sca3000_e05_driver);
error_unreg_e04:
spi_unregister_driver(&sca3000_e04_driver);
error_unreg_e02:
spi_unregister_driver(&sca3000_e02_driver);
-error_unreg_d03:
- spi_unregister_driver(&sca3000_d03_driver);
error_unreg_d01:
spi_unregister_driver(&sca3000_d01_driver);
error_ret:
static __exit void sca3000_exit(void)
{
- spi_unregister_driver(&sca3000_l01_driver);
spi_unregister_driver(&sca3000_e05_driver);
spi_unregister_driver(&sca3000_e04_driver);
spi_unregister_driver(&sca3000_e02_driver);
- spi_unregister_driver(&sca3000_d03_driver);
spi_unregister_driver(&sca3000_d01_driver);
}
return ret ? ret : len;
}
-static IIO_CONST_ATTR(bpse_available, "8 11");
+static IIO_SCAN_EL_C(accel_x, 0, 0, 0, 0);
+static IIO_SCAN_EL_C(accel_y, 1, 0, 0, 0);
+static IIO_SCAN_EL_C(accel_z, 2, 0, 0, 0);
+static IIO_CONST_ATTR(accel_precision_available, "8 11");
+static IIO_DEVICE_ATTR(accel_precision,
+ S_IRUGO | S_IWUSR,
+ sca3000_show_ring_bpse,
+ sca3000_store_ring_bpse,
+ 0);
+
+static struct attribute *sca3000_scan_el_attrs[] = {
+ &iio_scan_el_accel_x.dev_attr.attr,
+ &iio_scan_el_accel_y.dev_attr.attr,
+ &iio_scan_el_accel_z.dev_attr.attr,
+ &iio_const_attr_accel_precision_available.dev_attr.attr,
+ &iio_dev_attr_accel_precision.dev_attr.attr,
+ NULL
+};
-static IIO_DEV_ATTR_BPSE(S_IRUGO | S_IWUSR,
- sca3000_show_ring_bpse,
- sca3000_store_ring_bpse);
+static struct attribute_group sca3000_scan_el_group = {
+ .attrs = sca3000_scan_el_attrs,
+ .name = "scan_elements",
+};
/*
* Ring buffer attributes
* only apply to the ring buffer. At all times full rate and accuracy
* is available via direct reading from registers.
*/
-static struct attribute *iio_ring_attributes[] = {
+static struct attribute *sca3000_ring_attributes[] = {
&dev_attr_length.attr,
&dev_attr_bps.attr,
&dev_attr_ring_enable.attr,
- &iio_dev_attr_bpse.dev_attr.attr,
- &iio_const_attr_bpse_available.dev_attr.attr,
NULL,
};
static struct attribute_group sca3000_ring_attr = {
- .attrs = iio_ring_attributes,
+ .attrs = sca3000_ring_attributes,
};
static const struct attribute_group *sca3000_ring_attr_groups[] = {
int sca3000_configure_ring(struct iio_dev *indio_dev)
{
+ indio_dev->scan_el_attrs = &sca3000_scan_el_group;
indio_dev->ring = sca3000_rb_allocate(indio_dev);
if (indio_dev->ring == NULL)
return -ENOMEM;
*
* Odd one out. Handled slightly differently from other scan elements.
**/
-#define IIO_SCAN_EL_TIMESTAMP \
+#define IIO_SCAN_EL_TIMESTAMP(number) \
struct iio_scan_el iio_scan_el_timestamp = { \
- .dev_attr = __ATTR(scan_en_timestamp, \
+ .dev_attr = __ATTR(number##_timestamp_en, \
S_IRUGO | S_IWUSR, \
iio_scan_el_ts_show, \
iio_scan_el_ts_store), \
projects / mirror_ubuntu-eoan-kernel.git / commitdiff