]> git.proxmox.com Git - mirror_ubuntu-kernels.git/commitdiff
regulator: rt6752: Add support for Richtek RTQ6752
authorChiYuan Huang <cy_huang@richtek.com>
Fri, 9 Jul 2021 15:40:36 +0000 (23:40 +0800)
committerMark Brown <broonie@kernel.org>
Sun, 11 Jul 2021 22:50:42 +0000 (23:50 +0100)
Add suport for Richtek RTQ6752.

Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1625845236-30285-2-git-send-email-u0084500@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
drivers/regulator/Kconfig
drivers/regulator/Makefile
drivers/regulator/rtq6752-regulator.c [new file with mode: 0644]

index 24ce9a17ab4fe4710dc9007ff3642b8587010a09..6562d4c243b0102c2a2a54db8d239cde2e44446b 100644 (file)
@@ -1066,6 +1066,15 @@ config REGULATOR_RTMV20
          the Richtek RTMV20. It can support the load current up to 6A and
          integrate strobe/vsync/fsin signal to synchronize the IR camera.
 
+config REGULATOR_RTQ6752
+       tristate "Richtek RTQ6752 TFT LCD voltage regulator"
+       depends on I2C
+       select REGMAP_I2C
+       help
+         This driver adds support for Richtek RTQ6752. RTQ6752 includes two
+         synchronous boost converters for PAVDD, and one synchronous NAVDD
+         buck-boost. This device is suitable for automotive TFT-LCD panel.
+
 config REGULATOR_S2MPA01
        tristate "Samsung S2MPA01 voltage regulator"
        depends on MFD_SEC_CORE || COMPILE_TEST
index 8c2f82206b94c019ce5d30787bcd35c15b38c236..102b2a0069a2b14a28d2b2e903e6235928ddb78a 100644 (file)
@@ -128,6 +128,7 @@ obj-$(CONFIG_REGULATOR_RT5033)      += rt5033-regulator.o
 obj-$(CONFIG_REGULATOR_RT6160) += rt6160-regulator.o
 obj-$(CONFIG_REGULATOR_RT6245) += rt6245-regulator.o
 obj-$(CONFIG_REGULATOR_RTMV20) += rtmv20-regulator.o
+obj-$(CONFIG_REGULATOR_RTQ6752)        += rtq6752-regulator.o
 obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o
 obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o
 obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
diff --git a/drivers/regulator/rtq6752-regulator.c b/drivers/regulator/rtq6752-regulator.c
new file mode 100644 (file)
index 0000000..fe31597
--- /dev/null
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+
+enum {
+       RTQ6752_IDX_PAVDD = 0,
+       RTQ6752_IDX_NAVDD = 1,
+       RTQ6752_IDX_MAX
+};
+
+#define RTQ6752_REG_PAVDD      0x00
+#define RTQ6752_REG_NAVDD      0x01
+#define RTQ6752_REG_PAVDDONDLY 0x07
+#define RTQ6752_REG_PAVDDSSTIME        0x07
+#define RTQ6752_REG_NAVDDONDLY 0x0D
+#define RTQ6752_REG_NAVDDSSTIME        0x0E
+#define RTQ6752_REG_OPTION1    0x12
+#define RTQ6752_REG_CHSWITCH   0x16
+#define RTQ6752_REG_FAULT      0x1D
+
+#define RTQ6752_VOUT_MASK      GENMASK(5, 0)
+#define RTQ6752_NAVDDEN_MASK   BIT(3)
+#define RTQ6752_PAVDDEN_MASK   BIT(0)
+#define RTQ6752_PAVDDAD_MASK   BIT(4)
+#define RTQ6752_NAVDDAD_MASK   BIT(3)
+#define RTQ6752_PAVDDF_MASK    BIT(3)
+#define RTQ6752_NAVDDF_MASK    BIT(0)
+#define RTQ6752_ENABLE_MASK    (BIT(RTQ6752_IDX_MAX) - 1)
+
+#define RTQ6752_VOUT_MINUV     5000000
+#define RTQ6752_VOUT_STEPUV    50000
+#define RTQ6752_VOUT_NUM       47
+#define RTQ6752_I2CRDY_TIMEUS  1000
+#define RTQ6752_MINSS_TIMEUS   5000
+
+struct rtq6752_priv {
+       struct regmap *regmap;
+       struct gpio_desc *enable_gpio;
+       struct mutex lock;
+       unsigned char enable_flag;
+};
+
+static int rtq6752_set_vdd_enable(struct regulator_dev *rdev)
+{
+       struct rtq6752_priv *priv = rdev_get_drvdata(rdev);
+       int rid = rdev_get_id(rdev), ret;
+
+       mutex_lock(&priv->lock);
+       if (!priv->enable_flag && priv->enable_gpio) {
+               gpiod_set_value(priv->enable_gpio, 1);
+
+               usleep_range(RTQ6752_I2CRDY_TIMEUS,
+                            RTQ6752_I2CRDY_TIMEUS + 100);
+
+               regcache_cache_only(priv->regmap, false);
+               ret = regcache_sync(priv->regmap);
+               if (ret) {
+                       mutex_unlock(&priv->lock);
+                       return ret;
+               }
+       }
+
+       priv->enable_flag |= BIT(rid);
+       mutex_unlock(&priv->lock);
+
+       return regulator_enable_regmap(rdev);
+}
+
+static int rtq6752_set_vdd_disable(struct regulator_dev *rdev)
+{
+       struct rtq6752_priv *priv = rdev_get_drvdata(rdev);
+       int rid = rdev_get_id(rdev), ret;
+
+       ret = regulator_disable_regmap(rdev);
+       if (ret)
+               return ret;
+
+       mutex_lock(&priv->lock);
+       priv->enable_flag &= ~BIT(rid);
+
+       if (!priv->enable_flag && priv->enable_gpio) {
+               regcache_cache_only(priv->regmap, true);
+               regcache_mark_dirty(priv->regmap);
+
+               gpiod_set_value(priv->enable_gpio, 0);
+       }
+       mutex_unlock(&priv->lock);
+
+       return 0;
+}
+
+static int rtq6752_get_error_flags(struct regulator_dev *rdev,
+                                  unsigned int *flags)
+{
+       unsigned int val, events = 0;
+       const unsigned int fault_mask[] = {
+               RTQ6752_PAVDDF_MASK, RTQ6752_NAVDDF_MASK };
+       int rid = rdev_get_id(rdev), ret;
+
+       ret = regmap_read(rdev->regmap, RTQ6752_REG_FAULT, &val);
+       if (ret)
+               return ret;
+
+       if (val & fault_mask[rid])
+               events = REGULATOR_ERROR_REGULATION_OUT;
+
+       *flags = events;
+       return 0;
+}
+
+static const struct regulator_ops rtq6752_regulator_ops = {
+       .list_voltage = regulator_list_voltage_linear,
+       .set_voltage_sel = regulator_set_voltage_sel_regmap,
+       .get_voltage_sel = regulator_get_voltage_sel_regmap,
+       .enable = rtq6752_set_vdd_enable,
+       .disable = rtq6752_set_vdd_disable,
+       .is_enabled = regulator_is_enabled_regmap,
+       .set_active_discharge = regulator_set_active_discharge_regmap,
+       .get_error_flags = rtq6752_get_error_flags,
+};
+
+static const struct regulator_desc rtq6752_regulator_descs[] = {
+       {
+               .name = "rtq6752-pavdd",
+               .of_match = of_match_ptr("pavdd"),
+               .regulators_node = of_match_ptr("regulators"),
+               .id = RTQ6752_IDX_PAVDD,
+               .n_voltages = RTQ6752_VOUT_NUM,
+               .ops = &rtq6752_regulator_ops,
+               .owner = THIS_MODULE,
+               .min_uV = RTQ6752_VOUT_MINUV,
+               .uV_step = RTQ6752_VOUT_STEPUV,
+               .enable_time = RTQ6752_MINSS_TIMEUS,
+               .vsel_reg = RTQ6752_REG_PAVDD,
+               .vsel_mask = RTQ6752_VOUT_MASK,
+               .enable_reg = RTQ6752_REG_CHSWITCH,
+               .enable_mask = RTQ6752_PAVDDEN_MASK,
+               .active_discharge_reg = RTQ6752_REG_OPTION1,
+               .active_discharge_mask = RTQ6752_PAVDDAD_MASK,
+               .active_discharge_off = RTQ6752_PAVDDAD_MASK,
+       },
+       {
+               .name = "rtq6752-navdd",
+               .of_match = of_match_ptr("navdd"),
+               .regulators_node = of_match_ptr("regulators"),
+               .id = RTQ6752_IDX_NAVDD,
+               .n_voltages = RTQ6752_VOUT_NUM,
+               .ops = &rtq6752_regulator_ops,
+               .owner = THIS_MODULE,
+               .min_uV = RTQ6752_VOUT_MINUV,
+               .uV_step = RTQ6752_VOUT_STEPUV,
+               .enable_time = RTQ6752_MINSS_TIMEUS,
+               .vsel_reg = RTQ6752_REG_NAVDD,
+               .vsel_mask = RTQ6752_VOUT_MASK,
+               .enable_reg = RTQ6752_REG_CHSWITCH,
+               .enable_mask = RTQ6752_NAVDDEN_MASK,
+               .active_discharge_reg = RTQ6752_REG_OPTION1,
+               .active_discharge_mask = RTQ6752_NAVDDAD_MASK,
+               .active_discharge_off = RTQ6752_NAVDDAD_MASK,
+       }
+};
+
+static int rtq6752_init_device_properties(struct rtq6752_priv *priv)
+{
+       u8 raw_vals[] = { 0, 0 };
+       int ret;
+
+       /* Configure PAVDD on and softstart delay time to the minimum */
+       ret = regmap_raw_write(priv->regmap, RTQ6752_REG_PAVDDONDLY, raw_vals,
+                              ARRAY_SIZE(raw_vals));
+       if (ret)
+               return ret;
+
+       /* Configure NAVDD on and softstart delay time to the minimum */
+       return regmap_raw_write(priv->regmap, RTQ6752_REG_NAVDDONDLY, raw_vals,
+                               ARRAY_SIZE(raw_vals));
+}
+
+static bool rtq6752_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+       if (reg == RTQ6752_REG_FAULT)
+               return true;
+       return false;
+}
+
+static const struct reg_default rtq6752_reg_defaults[] = {
+       { RTQ6752_REG_PAVDD, 0x14 },
+       { RTQ6752_REG_NAVDD, 0x14 },
+       { RTQ6752_REG_PAVDDONDLY, 0x01 },
+       { RTQ6752_REG_PAVDDSSTIME, 0x01 },
+       { RTQ6752_REG_NAVDDONDLY, 0x01 },
+       { RTQ6752_REG_NAVDDSSTIME, 0x01 },
+       { RTQ6752_REG_OPTION1, 0x07 },
+       { RTQ6752_REG_CHSWITCH, 0x29 },
+};
+
+static const struct regmap_config rtq6752_regmap_config = {
+       .reg_bits = 8,
+       .val_bits = 8,
+       .cache_type = REGCACHE_RBTREE,
+       .max_register = RTQ6752_REG_FAULT,
+       .reg_defaults = rtq6752_reg_defaults,
+       .num_reg_defaults = ARRAY_SIZE(rtq6752_reg_defaults),
+       .volatile_reg = rtq6752_is_volatile_reg,
+};
+
+static int rtq6752_probe(struct i2c_client *i2c)
+{
+       struct rtq6752_priv *priv;
+       struct regulator_config reg_cfg = {};
+       struct regulator_dev *rdev;
+       int i, ret;
+
+       priv = devm_kzalloc(&i2c->dev, sizeof(*priv), GFP_KERNEL);
+       if (!priv)
+               return -ENOMEM;
+
+       mutex_init(&priv->lock);
+
+       priv->enable_gpio = devm_gpiod_get_optional(&i2c->dev, "enable",
+                                                   GPIOD_OUT_HIGH);
+       if (IS_ERR(priv->enable_gpio)) {
+               dev_err(&i2c->dev, "Failed to get 'enable' gpio\n");
+               return PTR_ERR(priv->enable_gpio);
+       }
+
+       usleep_range(RTQ6752_I2CRDY_TIMEUS, RTQ6752_I2CRDY_TIMEUS + 100);
+       /* Default EN pin to high, PAVDD and NAVDD will be on */
+       priv->enable_flag = RTQ6752_ENABLE_MASK;
+
+       priv->regmap = devm_regmap_init_i2c(i2c, &rtq6752_regmap_config);
+       if (IS_ERR(priv->regmap)) {
+               dev_err(&i2c->dev, "Failed to init regmap\n");
+               return PTR_ERR(priv->regmap);
+       }
+
+       ret = rtq6752_init_device_properties(priv);
+       if (ret) {
+               dev_err(&i2c->dev, "Failed to init device properties\n");
+               return ret;
+       }
+
+       reg_cfg.dev = &i2c->dev;
+       reg_cfg.regmap = priv->regmap;
+       reg_cfg.driver_data = priv;
+
+       for (i = 0; i < ARRAY_SIZE(rtq6752_regulator_descs); i++) {
+               rdev = devm_regulator_register(&i2c->dev,
+                                              rtq6752_regulator_descs + i,
+                                              &reg_cfg);
+               if (IS_ERR(rdev)) {
+                       dev_err(&i2c->dev, "Failed to init %d regulator\n", i);
+                       return PTR_ERR(rdev);
+               }
+       }
+
+       return 0;
+}
+
+static const struct of_device_id __maybe_unused rtq6752_device_table[] = {
+       { .compatible = "richtek,rtq6752", },
+       {}
+};
+MODULE_DEVICE_TABLE(of, rtq6752_device_table);
+
+static struct i2c_driver rtq6752_driver = {
+       .driver = {
+               .name = "rtq6752",
+               .of_match_table = rtq6752_device_table,
+       },
+       .probe_new = rtq6752_probe,
+};
+module_i2c_driver(rtq6752_driver);
+
+MODULE_AUTHOR("ChiYuan Hwang <cy_huang@richtek.com>");
+MODULE_DESCRIPTION("Richtek RTQ6752 Regulator Driver");
+MODULE_LICENSE("GPL v2");