ARM: at91: at9sam9m10g45ek: add dt lcd support

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index a4b00e5c61c09faca05f8e5b9e2604394982cba8..7b76dbde8c41d900919279d8c2ed40c487493348 100644 (file)
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -123,6 +123,35 @@
                        };
                };
 
+               fb0: fb@0x00500000 {
+                       display = <&display0>;
+                       status = "okay";
+
+                       display0: display {
+                               bits-per-pixel = <32>;
+                               atmel,lcdcon-backlight;
+                               atmel,dmacon = <0x1>;
+                               atmel,lcdcon2 = <0x80008002>;
+                               atmel,guard-time = <9>;
+                               atmel,lcd-wiring-mode = "RGB";
+
+                               display-timings {
+                                       native-mode = <&timing0>;
+                                       timing0: timing0 {
+                                               clock-frequency = <9000000>;
+                                               hactive = <480>;
+                                               vactive = <272>;
+                                               hback-porch = <1>;
+                                               hfront-porch = <1>;
+                                               vback-porch = <40>;
+                                               vfront-porch = <1>;
+                                               hsync-len = <45>;
+                                               vsync-len = <1>;
+                                       };
+                               };
+                       };
+               };
+
                nand0: nand@40000000 {
                        nand-bus-width = <8>;
                        nand-ecc-mode = "soft";