]> git.proxmox.com Git - mirror_ubuntu-disco-kernel.git/commitdiff
hwmon: (f75375s) Add support for F75387SG/RG
authorBjörn Gerhart <oss@extracloud.de>
Tue, 13 Dec 2011 18:19:58 +0000 (13:19 -0500)
committerGuenter Roeck <guenter.roeck@ericsson.com>
Thu, 5 Jan 2012 16:19:32 +0000 (08:19 -0800)
Fintek F75387SG/RG is mostly compatible to F75373/F75375. Add support for it
to the F75375S driver.

Fan support for F75387SG/RG has been implemented but not tested.

Cc: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Bjoern Gerhart <oss@extracloud.de>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
drivers/hwmon/Kconfig
drivers/hwmon/f75375s.c

index 91be41f6080947936bdd355f25500397ecfd1dfe..cb351d3583875a8ea1ebbb78ae681cb888e5dee3 100644 (file)
@@ -367,11 +367,11 @@ config SENSORS_F71882FG
          will be called f71882fg.
 
 config SENSORS_F75375S
-       tristate "Fintek F75375S/SP and F75373"
+       tristate "Fintek F75375S/SP, F75373 and F75387"
        depends on I2C
        help
          If you say yes here you get support for hardware monitoring
-         features of the Fintek F75375S/SP and F75373
+         features of the Fintek F75375S/SP, F75373 and F75387
 
          This driver can also be built as a module.  If so, the module
          will be called f75375s.
index 35b570e56ff0d29bf2c6ff7f3e35b148dc01d666..eedf574ab539c9108c7dec18e16e57994f9cee12 100644 (file)
@@ -1,6 +1,6 @@
 /*
- * f75375s.c - driver for the Fintek F75375/SP and F75373
- *             hardware monitoring features
+ * f75375s.c - driver for the Fintek F75375/SP, F75373 and
+ *             F75387SG/RG hardware monitoring features
  * Copyright (C) 2006-2007  Riku Voipio
  *
  * Datasheets available at:
@@ -11,6 +11,9 @@
  * f75373:
  * http://www.fintek.com.tw/files/productfiles/F75373_V025P.pdf
  *
+ * f75387:
+ * http://www.fintek.com.tw/files/productfiles/F75387_V027P.pdf
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -40,7 +43,7 @@
 /* Addresses to scan */
 static const unsigned short normal_i2c[] = { 0x2d, 0x2e, I2C_CLIENT_END };
 
-enum chips { f75373, f75375 };
+enum chips { f75373, f75375, f75387 };
 
 /* Fintek F75375 registers  */
 #define F75375_REG_CONFIG0             0x0
@@ -59,6 +62,7 @@ enum chips { f75373, f75375 };
 #define F75375_REG_VOLT_LOW(nr)                (0x21 + (nr) * 2)
 
 #define F75375_REG_TEMP(nr)            (0x14 + (nr))
+#define F75387_REG_TEMP11_LSB(nr)      (0x1a + (nr))
 #define F75375_REG_TEMP_HIGH(nr)       (0x28 + (nr) * 2)
 #define F75375_REG_TEMP_HYST(nr)       (0x29 + (nr) * 2)
 
@@ -78,8 +82,11 @@ enum chips { f75373, f75375 };
 #define F75375_REG_PWM1_DROP_DUTY      0x6B
 #define F75375_REG_PWM2_DROP_DUTY      0x6C
 
-#define FAN_CTRL_LINEAR(nr)            (4 + nr)
+#define F75375_FAN_CTRL_LINEAR(nr)     (4 + nr)
+#define F75387_FAN_CTRL_LINEAR(nr)     (1 + ((nr) * 4))
 #define FAN_CTRL_MODE(nr)              (4 + ((nr) * 2))
+#define F75387_FAN_DUTY_MODE(nr)       (2 + ((nr) * 4))
+#define F75387_FAN_MANU_MODE(nr)       ((nr) * 4)
 
 /*
  * Data structures and manipulation thereof
@@ -108,7 +115,12 @@ struct f75375_data {
        u8 pwm[2];
        u8 pwm_mode[2];
        u8 pwm_enable[2];
-       s8 temp[2];
+       /*
+        * f75387: For remote temperature reading, it uses signed 11-bit
+        * values with LSB = 0.125 degree Celsius, left-justified in 16-bit
+        * registers. For original 8-bit temp readings, the LSB just is 0.
+        */
+       s16 temp11[2];
        s8 temp_high[2];
        s8 temp_max_hyst[2];
 };
@@ -122,6 +134,7 @@ static int f75375_remove(struct i2c_client *client);
 static const struct i2c_device_id f75375_id[] = {
        { "f75373", f75373 },
        { "f75375", f75375 },
+       { "f75387", f75387 },
        { }
 };
 MODULE_DEVICE_TABLE(i2c, f75375_id);
@@ -205,8 +218,14 @@ static struct f75375_data *f75375_update_device(struct device *dev)
        if (time_after(jiffies, data->last_updated + 2 * HZ)
                || !data->valid) {
                for (nr = 0; nr < 2; nr++) {
-                       data->temp[nr] =
-                               f75375_read8(client, F75375_REG_TEMP(nr));
+                       /* assign MSB, therefore shift it by 8 bits */
+                       data->temp11[nr] =
+                               f75375_read8(client, F75375_REG_TEMP(nr)) << 8;
+                       if (data->kind == f75387)
+                               /* merge F75387's temperature LSB (11-bit) */
+                               data->temp11[nr] |=
+                                       f75375_read8(client,
+                                                    F75387_REG_TEMP11_LSB(nr));
                        data->fan[nr] =
                                f75375_read16(client, F75375_REG_FAN(nr));
                }
@@ -313,24 +332,50 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val)
                return -EINVAL;
 
        fanmode = f75375_read8(client, F75375_REG_FAN_TIMER);
-       fanmode &= ~(3 << FAN_CTRL_MODE(nr));
-
-       switch (val) {
-       case 0: /* Full speed */
-               fanmode  |= (3 << FAN_CTRL_MODE(nr));
-               data->pwm[nr] = 255;
-               f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
-                               data->pwm[nr]);
-               break;
-       case 1: /* PWM */
-               fanmode  |= (3 << FAN_CTRL_MODE(nr));
-               break;
-       case 2: /* AUTOMATIC*/
-               fanmode  |= (2 << FAN_CTRL_MODE(nr));
-               break;
-       case 3: /* fan speed */
-               break;
+       if (data->kind == f75387) {
+               /* clear each fanX_mode bit before setting them properly */
+               fanmode &= ~(1 << F75387_FAN_DUTY_MODE(nr));
+               fanmode &= ~(1 << F75387_FAN_MANU_MODE(nr));
+               switch (val) {
+               case 0: /* full speed */
+                       fanmode |= (1 << F75387_FAN_MANU_MODE(nr));
+                       fanmode |= (1 << F75387_FAN_DUTY_MODE(nr));
+                       data->pwm[nr] = 255;
+                       f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
+                                       data->pwm[nr]);
+                       break;
+               case 1: /* PWM */
+                       fanmode  |= (1 << F75387_FAN_MANU_MODE(nr));
+                       fanmode  |= (1 << F75387_FAN_DUTY_MODE(nr));
+                       break;
+               case 2: /* AUTOMATIC*/
+                       fanmode  |=  (1 << F75387_FAN_DUTY_MODE(nr));
+                       break;
+               case 3: /* fan speed */
+                       fanmode |= (1 << F75387_FAN_MANU_MODE(nr));
+                       break;
+               }
+       } else {
+               /* clear each fanX_mode bit before setting them properly */
+               fanmode &= ~(3 << FAN_CTRL_MODE(nr));
+               switch (val) {
+               case 0: /* full speed */
+                       fanmode  |= (3 << FAN_CTRL_MODE(nr));
+                       data->pwm[nr] = 255;
+                       f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
+                                       data->pwm[nr]);
+                       break;
+               case 1: /* PWM */
+                       fanmode  |= (3 << FAN_CTRL_MODE(nr));
+                       break;
+               case 2: /* AUTOMATIC*/
+                       fanmode  |= (2 << FAN_CTRL_MODE(nr));
+                       break;
+               case 3: /* fan speed */
+                       break;
+               }
        }
+
        f75375_write8(client, F75375_REG_FAN_TIMER, fanmode);
        data->pwm_enable[nr] = val;
        return 0;
@@ -364,6 +409,7 @@ static ssize_t set_pwm_mode(struct device *dev, struct device_attribute *attr,
        unsigned long val;
        int err;
        u8 conf;
+       char reg, ctrl;
 
        err = kstrtoul(buf, 10, &val);
        if (err < 0)
@@ -376,14 +422,23 @@ static ssize_t set_pwm_mode(struct device *dev, struct device_attribute *attr,
        if (data->kind == f75373 && val == 0)
                return -EINVAL;
 
+       /* take care for different registers */
+       if (data->kind == f75387) {
+               reg = F75375_REG_FAN_TIMER;
+               ctrl = F75387_FAN_CTRL_LINEAR(nr);
+       } else {
+               reg = F75375_REG_CONFIG1;
+               ctrl = F75375_FAN_CTRL_LINEAR(nr);
+       }
+
        mutex_lock(&data->update_lock);
-       conf = f75375_read8(client, F75375_REG_CONFIG1);
-       conf &= ~(1 << FAN_CTRL_LINEAR(nr));
+       conf = f75375_read8(client, reg);
+       conf &= ~(1 << ctrl);
 
        if (val == 0)
-               conf |= (1 << FAN_CTRL_LINEAR(nr)) ;
+               conf |= (1 << ctrl);
 
-       f75375_write8(client, F75375_REG_CONFIG1, conf);
+       f75375_write8(client, reg, conf);
        data->pwm_mode[nr] = val;
        mutex_unlock(&data->update_lock);
        return count;
@@ -475,13 +530,14 @@ static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
 }
 #define TEMP_FROM_REG(val) ((val) * 1000)
 #define TEMP_TO_REG(val) ((val) / 1000)
+#define TEMP11_FROM_REG(reg)   ((reg) / 32 * 125)
 
-static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
+static ssize_t show_temp11(struct device *dev, struct device_attribute *attr,
                char *buf)
 {
        int nr = to_sensor_dev_attr(attr)->index;
        struct f75375_data *data = f75375_update_device(dev);
-       return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr]));
+       return sprintf(buf, "%d\n", TEMP11_FROM_REG(data->temp11[nr]));
 }
 
 static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr,
@@ -577,12 +633,12 @@ static SENSOR_DEVICE_ATTR(in3_max, S_IRUGO|S_IWUSR,
        show_in_max, set_in_max, 3);
 static SENSOR_DEVICE_ATTR(in3_min, S_IRUGO|S_IWUSR,
        show_in_min, set_in_min, 3);
-static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp11, NULL, 0);
 static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IRUGO|S_IWUSR,
        show_temp_max_hyst, set_temp_max_hyst, 0);
 static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO|S_IWUSR,
        show_temp_max, set_temp_max, 0);
-static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp11, NULL, 1);
 static SENSOR_DEVICE_ATTR(temp2_max_hyst, S_IRUGO|S_IWUSR,
        show_temp_max_hyst, set_temp_max_hyst, 1);
 static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO|S_IWUSR,
@@ -664,18 +720,38 @@ static void f75375_init(struct i2c_client *client, struct f75375_data *data,
                conf = f75375_read8(client, F75375_REG_CONFIG1);
                mode = f75375_read8(client, F75375_REG_FAN_TIMER);
                for (nr = 0; nr < 2; nr++) {
-                       if (!(conf & (1 << FAN_CTRL_LINEAR(nr))))
-                               data->pwm_mode[nr] = 1;
-                       switch ((mode >> FAN_CTRL_MODE(nr)) & 3) {
-                       case 0:         /* speed */
-                               data->pwm_enable[nr] = 3;
-                               break;
-                       case 1:         /* automatic */
-                               data->pwm_enable[nr] = 2;
-                               break;
-                       default:        /* manual */
-                               data->pwm_enable[nr] = 1;
-                               break;
+                       if (data->kind == f75387) {
+                               bool manu, duty;
+
+                               if (!(conf & (1 << F75387_FAN_CTRL_LINEAR(nr))))
+                                       data->pwm_mode[nr] = 1;
+
+                               manu = ((mode >> F75387_FAN_MANU_MODE(nr)) & 1);
+                               duty = ((mode >> F75387_FAN_DUTY_MODE(nr)) & 1);
+                               if (manu && duty)
+                                       /* speed */
+                                       data->pwm_enable[nr] = 3;
+                               else if (!manu && duty)
+                                       /* automatic */
+                                       data->pwm_enable[nr] = 2;
+                               else
+                                       /* manual */
+                                       data->pwm_enable[nr] = 1;
+                       } else {
+                               if (!(conf & (1 << F75375_FAN_CTRL_LINEAR(nr))))
+                                       data->pwm_mode[nr] = 1;
+
+                               switch ((mode >> FAN_CTRL_MODE(nr)) & 3) {
+                               case 0:         /* speed */
+                                       data->pwm_enable[nr] = 3;
+                                       break;
+                               case 1:         /* automatic */
+                                       data->pwm_enable[nr] = 2;
+                                       break;
+                               default:        /* manual */
+                                       data->pwm_enable[nr] = 1;
+                                       break;
+                               }
                        }
                }
                return;
@@ -763,10 +839,15 @@ static int f75375_detect(struct i2c_client *client,
 
        vendid = f75375_read16(client, F75375_REG_VENDOR);
        chipid = f75375_read16(client, F75375_CHIP_ID);
-       if (chipid == 0x0306 && vendid == 0x1934)
+       if (vendid != 0x1934)
+               return -ENODEV;
+
+       if (chipid == 0x0306)
                name = "f75375";
-       else if (chipid == 0x0204 && vendid == 0x1934)
+       else if (chipid == 0x0204)
                name = "f75373";
+       else if (chipid == 0x0410)
+               name = "f75387";
        else
                return -ENODEV;
 
@@ -789,7 +870,7 @@ static void __exit sensors_f75375_exit(void)
 
 MODULE_AUTHOR("Riku Voipio");
 MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("F75373/F75375 hardware monitoring driver");
+MODULE_DESCRIPTION("F75373/F75375/F75387 hardware monitoring driver");
 
 module_init(sensors_f75375_init);
 module_exit(sensors_f75375_exit);