We have to do this manually. Somebody had a Great Idea.
I've measured speed-ups just a few percent above the noise level
(below 5% for the best case), but no slowdows. Chris Wilson measured
quite a bit more (10-20% above the usual snb variance) on a more
recent and better tuned version of sna, but also recorded a few
slow-downs on benchmarks know for uglier amounts of snb-induced
variance.
v2: Incorporate Ben Widawsky's preliminary review comments and
elaborate a bit about the performance impact in the changelog.
v3: Add a comment as to why we don't need to check the 3rd memory
channel.
v4: Fixup whitespace.
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
i915_gem_do_init(dev, 0, mappable_size, gtt_size - PAGE_SIZE);
mutex_lock(&dev->struct_mutex);
- ret = i915_gem_init_ringbuffer(dev);
+ ret = i915_gem_init_hw(dev);
mutex_unlock(&dev->struct_mutex);
if (ret)
return ret;
mutex_lock(&dev->struct_mutex);
dev_priv->mm.suspended = 0;
- error = i915_gem_init_ringbuffer(dev);
+ error = i915_gem_init_hw(dev);
mutex_unlock(&dev->struct_mutex);
if (HAS_PCH_SPLIT(dev))
!dev_priv->mm.suspended) {
dev_priv->mm.suspended = 0;
+ i915_gem_init_swizzling(dev);
+
dev_priv->ring[RCS].init(&dev_priv->ring[RCS]);
if (HAS_BSD(dev))
dev_priv->ring[VCS].init(&dev_priv->ring[VCS]);
uint32_t read_domains,
uint32_t write_domain);
int __must_check i915_gem_object_finish_gpu(struct drm_i915_gem_object *obj);
-int __must_check i915_gem_init_ringbuffer(struct drm_device *dev);
+int __must_check i915_gem_init_hw(struct drm_device *dev);
+void i915_gem_init_swizzling(struct drm_device *dev);
void i915_gem_cleanup_ringbuffer(struct drm_device *dev);
void i915_gem_do_init(struct drm_device *dev,
unsigned long start,
return 0;
}
+void i915_gem_init_swizzling(struct drm_device *dev)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+
+ if (INTEL_INFO(dev)->gen < 6 ||
+ dev_priv->mm.bit_6_swizzle_x == I915_BIT_6_SWIZZLE_NONE)
+ return;
+
+ I915_WRITE(DISP_ARB_CTL, I915_READ(DISP_ARB_CTL) |
+ DISP_TILE_SURFACE_SWIZZLING);
+
+ I915_WRITE(TILECTL, I915_READ(TILECTL) | TILECTL_SWZCTL);
+ if (IS_GEN6(dev))
+ I915_WRITE(ARB_MODE, ARB_MODE_ENABLE(ARB_MODE_SWIZZLE_SNB));
+ else
+ I915_WRITE(ARB_MODE, ARB_MODE_ENABLE(ARB_MODE_SWIZZLE_IVB));
+}
int
-i915_gem_init_ringbuffer(struct drm_device *dev)
+i915_gem_init_hw(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
int ret;
+ i915_gem_init_swizzling(dev);
+
ret = intel_init_render_ring_buffer(dev);
if (ret)
return ret;
mutex_lock(&dev->struct_mutex);
dev_priv->mm.suspended = 0;
- ret = i915_gem_init_ringbuffer(dev);
+ ret = i915_gem_init_hw(dev);
if (ret != 0) {
mutex_unlock(&dev->struct_mutex);
return ret;
uint32_t swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
if (INTEL_INFO(dev)->gen >= 6) {
- swizzle_x = I915_BIT_6_SWIZZLE_NONE;
- swizzle_y = I915_BIT_6_SWIZZLE_NONE;
+ uint32_t dimm_c0, dimm_c1;
+ dimm_c0 = I915_READ(MAD_DIMM_C0);
+ dimm_c1 = I915_READ(MAD_DIMM_C1);
+ dimm_c0 &= MAD_DIMM_A_SIZE_MASK | MAD_DIMM_B_SIZE_MASK;
+ dimm_c1 &= MAD_DIMM_A_SIZE_MASK | MAD_DIMM_B_SIZE_MASK;
+ /* Enable swizzling when the channels are populated with
+ * identically sized dimms. We don't need to check the 3rd
+ * channel because no cpu with gpu attached ships in that
+ * configuration. Also, swizzling only makes sense for 2
+ * channels anyway. */
+ if (dimm_c0 == dimm_c1) {
+ swizzle_x = I915_BIT_6_SWIZZLE_9_10;
+ swizzle_y = I915_BIT_6_SWIZZLE_9;
+ } else {
+ swizzle_x = I915_BIT_6_SWIZZLE_NONE;
+ swizzle_y = I915_BIT_6_SWIZZLE_NONE;
+ }
} else if (IS_GEN5(dev)) {
/* On Ironlake whatever DRAM config, GPU always do
* same swizzling setup.
#define FENCE_REG_SANDYBRIDGE_0 0x100000
#define SANDYBRIDGE_FENCE_PITCH_SHIFT 32
+/* control register for cpu gtt access */
+#define TILECTL 0x101000
+#define TILECTL_SWZCTL (1 << 0)
+#define TILECTL_TLB_PREFETCH_DIS (1 << 2)
+#define TILECTL_BACKSNOOP_DIS (1 << 3)
+
/*
* Instruction and interrupt control regs
*/
#define RING_MAX_IDLE(base) ((base)+0x54)
#define RING_HWS_PGA(base) ((base)+0x80)
#define RING_HWS_PGA_GEN6(base) ((base)+0x2080)
+#define ARB_MODE 0x04030
+#define ARB_MODE_SWIZZLE_SNB (1<<4)
+#define ARB_MODE_SWIZZLE_IVB (1<<5)
+#define ARB_MODE_ENABLE(x) GFX_MODE_ENABLE(x)
+#define ARB_MODE_DISABLE(x) GFX_MODE_DISABLE(x)
#define RENDER_HWS_PGA_GEN7 (0x04080)
#define RING_FAULT_REG(ring) (0x4094 + 0x100*(ring)->id)
#define DONE_REG 0x40b0
#define C0DRB3 0x10206
#define C1DRB3 0x10606
+/** snb MCH registers for reading the DRAM channel configuration */
+#define MAD_DIMM_C0 (MCHBAR_MIRROR_BASE_SNB + 0x5004)
+#define MAD_DIMM_C1 (MCHBAR_MIRROR_BASE_SNB + 0x5008)
+#define MAD_DIMM_C2 (MCHBAR_MIRROR_BASE_SNB + 0x500C)
+#define MAD_DIMM_ECC_MASK (0x3 << 24)
+#define MAD_DIMM_ECC_OFF (0x0 << 24)
+#define MAD_DIMM_ECC_IO_ON_LOGIC_OFF (0x1 << 24)
+#define MAD_DIMM_ECC_IO_OFF_LOGIC_ON (0x2 << 24)
+#define MAD_DIMM_ECC_ON (0x3 << 24)
+#define MAD_DIMM_ENH_INTERLEAVE (0x1 << 22)
+#define MAD_DIMM_RANK_INTERLEAVE (0x1 << 21)
+#define MAD_DIMM_B_WIDTH_X16 (0x1 << 20) /* X8 chips if unset */
+#define MAD_DIMM_A_WIDTH_X16 (0x1 << 19) /* X8 chips if unset */
+#define MAD_DIMM_B_DUAL_RANK (0x1 << 18)
+#define MAD_DIMM_A_DUAL_RANK (0x1 << 17)
+#define MAD_DIMM_A_SELECT (0x1 << 16)
+/* DIMM sizes are in multiples of 256mb. */
+#define MAD_DIMM_B_SIZE_SHIFT 8
+#define MAD_DIMM_B_SIZE_MASK (0xff << MAD_DIMM_B_SIZE_SHIFT)
+#define MAD_DIMM_A_SIZE_SHIFT 0
+#define MAD_DIMM_A_SIZE_MASK (0xff << MAD_DIMM_A_SIZE_SHIFT)
+
+
/* Clocking configuration register */
#define CLKCFG 0x10c00
#define CLKCFG_FSB_400 (5 << 0) /* hrawclk 100 */
projects / mirror_ubuntu-disco-kernel.git / commitdiff