#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/slab.h>
+#include <linux/soundwire/sdw_registers.h>
#include <linux/soundwire/sdw.h>
#include "bus.h"
+static int _sdw_program_slave_port_params(struct sdw_bus *bus,
+ struct sdw_slave *slave,
+ struct sdw_transport_params *t_params,
+ enum sdw_dpn_type type)
+{
+ u32 addr1, addr2, addr3, addr4;
+ int ret;
+ u16 wbuf;
+
+ if (bus->params.next_bank) {
+ addr1 = SDW_DPN_OFFSETCTRL2_B1(t_params->port_num);
+ addr2 = SDW_DPN_BLOCKCTRL3_B1(t_params->port_num);
+ addr3 = SDW_DPN_SAMPLECTRL2_B1(t_params->port_num);
+ addr4 = SDW_DPN_HCTRL_B1(t_params->port_num);
+ } else {
+ addr1 = SDW_DPN_OFFSETCTRL2_B0(t_params->port_num);
+ addr2 = SDW_DPN_BLOCKCTRL3_B0(t_params->port_num);
+ addr3 = SDW_DPN_SAMPLECTRL2_B0(t_params->port_num);
+ addr4 = SDW_DPN_HCTRL_B0(t_params->port_num);
+ }
+
+ /* Program DPN_OffsetCtrl2 registers */
+ ret = sdw_write(slave, addr1, t_params->offset2);
+ if (ret < 0) {
+ dev_err(bus->dev, "DPN_OffsetCtrl2 register write failed");
+ return ret;
+ }
+
+ /* Program DPN_BlockCtrl3 register */
+ ret = sdw_write(slave, addr2, t_params->blk_pkg_mode);
+ if (ret < 0) {
+ dev_err(bus->dev, "DPN_BlockCtrl3 register write failed");
+ return ret;
+ }
+
+ /*
+ * Data ports are FULL, SIMPLE and REDUCED. This function handles
+ * FULL and REDUCED only and and beyond this point only FULL is
+ * handled, so bail out if we are not FULL data port type
+ */
+ if (type != SDW_DPN_FULL)
+ return ret;
+
+ /* Program DPN_SampleCtrl2 register */
+ wbuf = (t_params->sample_interval - 1);
+ wbuf &= SDW_DPN_SAMPLECTRL_HIGH;
+ wbuf >>= SDW_REG_SHIFT(SDW_DPN_SAMPLECTRL_HIGH);
+
+ ret = sdw_write(slave, addr3, wbuf);
+ if (ret < 0) {
+ dev_err(bus->dev, "DPN_SampleCtrl2 register write failed");
+ return ret;
+ }
+
+ /* Program DPN_HCtrl register */
+ wbuf = t_params->hstart;
+ wbuf <<= SDW_REG_SHIFT(SDW_DPN_HCTRL_HSTART);
+ wbuf |= t_params->hstop;
+
+ ret = sdw_write(slave, addr4, wbuf);
+ if (ret < 0)
+ dev_err(bus->dev, "DPN_HCtrl register write failed");
+
+ return ret;
+}
+
+static int sdw_program_slave_port_params(struct sdw_bus *bus,
+ struct sdw_slave_runtime *s_rt,
+ struct sdw_port_runtime *p_rt)
+{
+ struct sdw_transport_params *t_params = &p_rt->transport_params;
+ struct sdw_port_params *p_params = &p_rt->port_params;
+ struct sdw_slave_prop *slave_prop = &s_rt->slave->prop;
+ u32 addr1, addr2, addr3, addr4, addr5, addr6;
+ struct sdw_dpn_prop *dpn_prop;
+ int ret;
+ u8 wbuf;
+
+ dpn_prop = sdw_get_slave_dpn_prop(s_rt->slave,
+ s_rt->direction,
+ t_params->port_num);
+ if (!dpn_prop)
+ return -EINVAL;
+
+ addr1 = SDW_DPN_PORTCTRL(t_params->port_num);
+ addr2 = SDW_DPN_BLOCKCTRL1(t_params->port_num);
+
+ if (bus->params.next_bank) {
+ addr3 = SDW_DPN_SAMPLECTRL1_B1(t_params->port_num);
+ addr4 = SDW_DPN_OFFSETCTRL1_B1(t_params->port_num);
+ addr5 = SDW_DPN_BLOCKCTRL2_B1(t_params->port_num);
+ addr6 = SDW_DPN_LANECTRL_B1(t_params->port_num);
+
+ } else {
+ addr3 = SDW_DPN_SAMPLECTRL1_B0(t_params->port_num);
+ addr4 = SDW_DPN_OFFSETCTRL1_B0(t_params->port_num);
+ addr5 = SDW_DPN_BLOCKCTRL2_B0(t_params->port_num);
+ addr6 = SDW_DPN_LANECTRL_B0(t_params->port_num);
+ }
+
+ /* Program DPN_PortCtrl register */
+ wbuf = p_params->data_mode << SDW_REG_SHIFT(SDW_DPN_PORTCTRL_DATAMODE);
+ wbuf |= p_params->flow_mode;
+
+ ret = sdw_update(s_rt->slave, addr1, 0xF, wbuf);
+ if (ret < 0) {
+ dev_err(&s_rt->slave->dev,
+ "DPN_PortCtrl register write failed for port %d",
+ t_params->port_num);
+ return ret;
+ }
+
+ /* Program DPN_BlockCtrl1 register */
+ ret = sdw_write(s_rt->slave, addr2, (p_params->bps - 1));
+ if (ret < 0) {
+ dev_err(&s_rt->slave->dev,
+ "DPN_BlockCtrl1 register write failed for port %d",
+ t_params->port_num);
+ return ret;
+ }
+
+ /* Program DPN_SampleCtrl1 register */
+ wbuf = (t_params->sample_interval - 1) & SDW_DPN_SAMPLECTRL_LOW;
+ ret = sdw_write(s_rt->slave, addr3, wbuf);
+ if (ret < 0) {
+ dev_err(&s_rt->slave->dev,
+ "DPN_SampleCtrl1 register write failed for port %d",
+ t_params->port_num);
+ return ret;
+ }
+
+ /* Program DPN_OffsetCtrl1 registers */
+ ret = sdw_write(s_rt->slave, addr4, t_params->offset1);
+ if (ret < 0) {
+ dev_err(&s_rt->slave->dev,
+ "DPN_OffsetCtrl1 register write failed for port %d",
+ t_params->port_num);
+ return ret;
+ }
+
+ /* Program DPN_BlockCtrl2 register*/
+ if (t_params->blk_grp_ctrl_valid) {
+ ret = sdw_write(s_rt->slave, addr5, t_params->blk_grp_ctrl);
+ if (ret < 0) {
+ dev_err(&s_rt->slave->dev,
+ "DPN_BlockCtrl2 reg write failed for port %d",
+ t_params->port_num);
+ return ret;
+ }
+ }
+
+ /* program DPN_LaneCtrl register */
+ if (slave_prop->lane_control_support) {
+ ret = sdw_write(s_rt->slave, addr6, t_params->lane_ctrl);
+ if (ret < 0) {
+ dev_err(&s_rt->slave->dev,
+ "DPN_LaneCtrl register write failed for port %d",
+ t_params->port_num);
+ return ret;
+ }
+ }
+
+ if (dpn_prop->type != SDW_DPN_SIMPLE) {
+ ret = _sdw_program_slave_port_params(bus, s_rt->slave,
+ t_params, dpn_prop->type);
+ if (ret < 0)
+ dev_err(&s_rt->slave->dev,
+ "Transport reg write failed for port: %d",
+ t_params->port_num);
+ }
+
+ return ret;
+}
+
+static int sdw_program_master_port_params(struct sdw_bus *bus,
+ struct sdw_port_runtime *p_rt)
+{
+ int ret;
+
+ /*
+ * we need to set transport and port parameters for the port.
+ * Transport parameters refers to the smaple interval, offsets and
+ * hstart/stop etc of the data. Port parameters refers to word
+ * length, flow mode etc of the port
+ */
+ ret = bus->port_ops->dpn_set_port_transport_params(bus,
+ &p_rt->transport_params,
+ bus->params.next_bank);
+ if (ret < 0)
+ return ret;
+
+ return bus->port_ops->dpn_set_port_params(bus,
+ &p_rt->port_params,
+ bus->params.next_bank);
+}
+
+/**
+ * sdw_program_port_params() - Programs transport parameters of Master(s)
+ * and Slave(s)
+ *
+ * @m_rt: Master stream runtime
+ */
+static int sdw_program_port_params(struct sdw_master_runtime *m_rt)
+{
+ struct sdw_slave_runtime *s_rt = NULL;
+ struct sdw_bus *bus = m_rt->bus;
+ struct sdw_port_runtime *p_rt;
+ int ret = 0;
+
+ /* Program transport & port parameters for Slave(s) */
+ list_for_each_entry(s_rt, &m_rt->slave_rt_list, m_rt_node) {
+ list_for_each_entry(p_rt, &s_rt->port_list, port_node) {
+ ret = sdw_program_slave_port_params(bus, s_rt, p_rt);
+ if (ret < 0)
+ return ret;
+ }
+ }
+
+ /* Program transport & port parameters for Master(s) */
+ list_for_each_entry(p_rt, &m_rt->port_list, port_node) {
+ ret = sdw_program_master_port_params(bus, p_rt);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
/**
* sdw_release_stream() - Free the assigned stream runtime
*
return ret;
}
EXPORT_SYMBOL(sdw_stream_add_slave);
+
+/**
+ * sdw_get_slave_dpn_prop() - Get Slave port capabilities
+ *
+ * @slave: Slave handle
+ * @direction: Data direction.
+ * @port_num: Port number
+ */
+struct sdw_dpn_prop *sdw_get_slave_dpn_prop(struct sdw_slave *slave,
+ enum sdw_data_direction direction,
+ unsigned int port_num)
+{
+ struct sdw_dpn_prop *dpn_prop;
+ u8 num_ports;
+ int i;
+
+ if (direction == SDW_DATA_DIR_TX) {
+ num_ports = hweight32(slave->prop.source_ports);
+ dpn_prop = slave->prop.src_dpn_prop;
+ } else {
+ num_ports = hweight32(slave->prop.sink_ports);
+ dpn_prop = slave->prop.sink_dpn_prop;
+ }
+
+ for (i = 0; i < num_ports; i++) {
+ dpn_prop = &dpn_prop[i];
+
+ if (dpn_prop->num == port_num)
+ return &dpn_prop[i];
+ }
+
+ return NULL;
+}
};
/**
- * struct sdw_slave_ops - Slave driver callback ops
+ * sdw_reg_bank - SoundWire register banks
+ * @SDW_BANK0: Soundwire register bank 0
+ * @SDW_BANK1: Soundwire register bank 1
+ */
+enum sdw_reg_bank {
+ SDW_BANK0,
+ SDW_BANK1,
+};
+
+/**
+ * struct sdw_bus_params: Structure holding bus configuration
+ *
+ * @curr_bank: Current bank in use (BANK0/BANK1)
+ * @next_bank: Next bank to use (BANK0/BANK1). next_bank will always be
+ * set to !curr_bank
+ */
+struct sdw_bus_params {
+ enum sdw_reg_bank curr_bank;
+ enum sdw_reg_bank next_bank;
+};
+
+/**
+ * struct sdw_slave_ops: Slave driver callback ops
+ *
* @read_prop: Read Slave properties
* @interrupt_callback: Device interrupt notification (invoked in thread
* context)
unsigned int lane_ctrl;
};
+/**
+ * struct sdw_master_port_ops: Callback functions from bus to Master
+ * driver to set Master Data ports.
+ *
+ * @dpn_set_port_params: Set the Port parameters for the Master Port.
+ * Mandatory callback
+ * @dpn_set_port_transport_params: Set transport parameters for the Master
+ * Port. Mandatory callback
+ */
+struct sdw_master_port_ops {
+ int (*dpn_set_port_params)(struct sdw_bus *bus,
+ struct sdw_port_params *port_params,
+ unsigned int bank);
+ int (*dpn_set_port_transport_params)(struct sdw_bus *bus,
+ struct sdw_transport_params *transport_params,
+ enum sdw_reg_bank bank);
+};
+
struct sdw_msg;
/**
* @bus_lock: bus lock
* @msg_lock: message lock
* @ops: Master callback ops
+ * @port_ops: Master port callback ops
+ * @params: Current bus parameters
* @prop: Master properties
* @m_rt_list: List of Master instance of all stream(s) running on Bus. This
* is used to compute and program bus bandwidth, clock, frame shape,
struct mutex bus_lock;
struct mutex msg_lock;
const struct sdw_master_ops *ops;
+ const struct sdw_master_port_ops *port_ops;
+ struct sdw_bus_params params;
struct sdw_master_prop prop;
struct list_head m_rt_list;
struct sdw_defer defer_msg;
projects / mirror_ubuntu-jammy-kernel.git / commitdiff