dwc2-y += gadget.o
endif
+ifneq ($(CONFIG_DEBUG_FS),)
+ dwc2-y += debugfs.o
+endif
+
# NOTE: The previous s3c-hsotg peripheral mode only driver has been moved to
# this location and renamed gadget.c. When building for dynamically linked
# modules, dwc2.ko will get built for host mode, peripheral mode, and dual-role
enum dwc2_lx_state lx_state;
struct dentry *debug_root;
- struct dentry *debug_file;
- struct dentry *debug_testmode;
- struct dentry *debug_fifo;
/* DWC OTG HW Release versions */
#define DWC2_CORE_REV_2_71a 0x4f54271a
bool reset);
extern void s3c_hsotg_core_connect(struct dwc2_hsotg *hsotg);
extern void s3c_hsotg_disconnect(struct dwc2_hsotg *dwc2);
+extern int s3c_hsotg_set_test_mode(struct dwc2_hsotg *hsotg, int testmode);
#else
static inline int s3c_hsotg_remove(struct dwc2_hsotg *dwc2)
{ return 0; }
bool reset) {}
static inline void s3c_hsotg_core_connect(struct dwc2_hsotg *hsotg) {}
static inline void s3c_hsotg_disconnect(struct dwc2_hsotg *dwc2) {}
+static inline int s3c_hsotg_set_test_mode(struct dwc2_hsotg *hsotg,
+ int testmode)
+{ return 0; }
#endif
#if IS_ENABLED(CONFIG_USB_DWC2_HOST) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
--- /dev/null
+/**
+ * debug.h - Designware USB2 DRD controller debug header
+ *
+ * Copyright (C) 2015 Intel Corporation
+ * Mian Yousaf Kaukab <yousaf.kaukab@intel.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "core.h"
+
+#ifdef CONFIG_DEBUG_FS
+extern int dwc2_debugfs_init(struct dwc2_hsotg *);
+extern void dwc2_debugfs_exit(struct dwc2_hsotg *);
+#else
+static inline int dwc2_debugfs_init(struct dwc2_hsotg *hsotg)
+{ return 0; }
+static inline void dwc2_debugfs_exit(struct dwc2_hsotg *hsotg)
+{ }
+#endif
--- /dev/null
+/**
+ * debugfs.c - Designware USB2 DRD controller debugfs
+ *
+ * Copyright (C) 2015 Intel Corporation
+ * Mian Yousaf Kaukab <yousaf.kaukab@intel.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/spinlock.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/uaccess.h>
+
+#include "core.h"
+#include "debug.h"
+
+#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
+ IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
+/**
+ * testmode_write - debugfs: change usb test mode
+ * @seq: The seq file to write to.
+ * @v: Unused parameter.
+ *
+ * This debugfs entry modify the current usb test mode.
+ */
+static ssize_t testmode_write(struct file *file, const char __user *ubuf, size_t
+ count, loff_t *ppos)
+{
+ struct seq_file *s = file->private_data;
+ struct dwc2_hsotg *hsotg = s->private;
+ unsigned long flags;
+ u32 testmode = 0;
+ char buf[32];
+
+ if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
+ return -EFAULT;
+
+ if (!strncmp(buf, "test_j", 6))
+ testmode = TEST_J;
+ else if (!strncmp(buf, "test_k", 6))
+ testmode = TEST_K;
+ else if (!strncmp(buf, "test_se0_nak", 12))
+ testmode = TEST_SE0_NAK;
+ else if (!strncmp(buf, "test_packet", 11))
+ testmode = TEST_PACKET;
+ else if (!strncmp(buf, "test_force_enable", 17))
+ testmode = TEST_FORCE_EN;
+ else
+ testmode = 0;
+
+ spin_lock_irqsave(&hsotg->lock, flags);
+ s3c_hsotg_set_test_mode(hsotg, testmode);
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+ return count;
+}
+
+/**
+ * testmode_show - debugfs: show usb test mode state
+ * @seq: The seq file to write to.
+ * @v: Unused parameter.
+ *
+ * This debugfs entry shows which usb test mode is currently enabled.
+ */
+static int testmode_show(struct seq_file *s, void *unused)
+{
+ struct dwc2_hsotg *hsotg = s->private;
+ unsigned long flags;
+ int dctl;
+
+ spin_lock_irqsave(&hsotg->lock, flags);
+ dctl = readl(hsotg->regs + DCTL);
+ dctl &= DCTL_TSTCTL_MASK;
+ dctl >>= DCTL_TSTCTL_SHIFT;
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+
+ switch (dctl) {
+ case 0:
+ seq_puts(s, "no test\n");
+ break;
+ case TEST_J:
+ seq_puts(s, "test_j\n");
+ break;
+ case TEST_K:
+ seq_puts(s, "test_k\n");
+ break;
+ case TEST_SE0_NAK:
+ seq_puts(s, "test_se0_nak\n");
+ break;
+ case TEST_PACKET:
+ seq_puts(s, "test_packet\n");
+ break;
+ case TEST_FORCE_EN:
+ seq_puts(s, "test_force_enable\n");
+ break;
+ default:
+ seq_printf(s, "UNKNOWN %d\n", dctl);
+ }
+
+ return 0;
+}
+
+static int testmode_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, testmode_show, inode->i_private);
+}
+
+static const struct file_operations testmode_fops = {
+ .owner = THIS_MODULE,
+ .open = testmode_open,
+ .write = testmode_write,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+/**
+ * state_show - debugfs: show overall driver and device state.
+ * @seq: The seq file to write to.
+ * @v: Unused parameter.
+ *
+ * This debugfs entry shows the overall state of the hardware and
+ * some general information about each of the endpoints available
+ * to the system.
+ */
+static int state_show(struct seq_file *seq, void *v)
+{
+ struct dwc2_hsotg *hsotg = seq->private;
+ void __iomem *regs = hsotg->regs;
+ int idx;
+
+ seq_printf(seq, "DCFG=0x%08x, DCTL=0x%08x, DSTS=0x%08x\n",
+ readl(regs + DCFG),
+ readl(regs + DCTL),
+ readl(regs + DSTS));
+
+ seq_printf(seq, "DIEPMSK=0x%08x, DOEPMASK=0x%08x\n",
+ readl(regs + DIEPMSK), readl(regs + DOEPMSK));
+
+ seq_printf(seq, "GINTMSK=0x%08x, GINTSTS=0x%08x\n",
+ readl(regs + GINTMSK),
+ readl(regs + GINTSTS));
+
+ seq_printf(seq, "DAINTMSK=0x%08x, DAINT=0x%08x\n",
+ readl(regs + DAINTMSK),
+ readl(regs + DAINT));
+
+ seq_printf(seq, "GNPTXSTS=0x%08x, GRXSTSR=%08x\n",
+ readl(regs + GNPTXSTS),
+ readl(regs + GRXSTSR));
+
+ seq_puts(seq, "\nEndpoint status:\n");
+
+ for (idx = 0; idx < hsotg->num_of_eps; idx++) {
+ u32 in, out;
+
+ in = readl(regs + DIEPCTL(idx));
+ out = readl(regs + DOEPCTL(idx));
+
+ seq_printf(seq, "ep%d: DIEPCTL=0x%08x, DOEPCTL=0x%08x",
+ idx, in, out);
+
+ in = readl(regs + DIEPTSIZ(idx));
+ out = readl(regs + DOEPTSIZ(idx));
+
+ seq_printf(seq, ", DIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x",
+ in, out);
+
+ seq_puts(seq, "\n");
+ }
+
+ return 0;
+}
+
+static int state_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, state_show, inode->i_private);
+}
+
+static const struct file_operations state_fops = {
+ .owner = THIS_MODULE,
+ .open = state_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+/**
+ * fifo_show - debugfs: show the fifo information
+ * @seq: The seq_file to write data to.
+ * @v: Unused parameter.
+ *
+ * Show the FIFO information for the overall fifo and all the
+ * periodic transmission FIFOs.
+ */
+static int fifo_show(struct seq_file *seq, void *v)
+{
+ struct dwc2_hsotg *hsotg = seq->private;
+ void __iomem *regs = hsotg->regs;
+ u32 val;
+ int idx;
+
+ seq_puts(seq, "Non-periodic FIFOs:\n");
+ seq_printf(seq, "RXFIFO: Size %d\n", readl(regs + GRXFSIZ));
+
+ val = readl(regs + GNPTXFSIZ);
+ seq_printf(seq, "NPTXFIFO: Size %d, Start 0x%08x\n",
+ val >> FIFOSIZE_DEPTH_SHIFT,
+ val & FIFOSIZE_DEPTH_MASK);
+
+ seq_puts(seq, "\nPeriodic TXFIFOs:\n");
+
+ for (idx = 1; idx < hsotg->num_of_eps; idx++) {
+ val = readl(regs + DPTXFSIZN(idx));
+
+ seq_printf(seq, "\tDPTXFIFO%2d: Size %d, Start 0x%08x\n", idx,
+ val >> FIFOSIZE_DEPTH_SHIFT,
+ val & FIFOSIZE_STARTADDR_MASK);
+ }
+
+ return 0;
+}
+
+static int fifo_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, fifo_show, inode->i_private);
+}
+
+static const struct file_operations fifo_fops = {
+ .owner = THIS_MODULE,
+ .open = fifo_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static const char *decode_direction(int is_in)
+{
+ return is_in ? "in" : "out";
+}
+
+/**
+ * ep_show - debugfs: show the state of an endpoint.
+ * @seq: The seq_file to write data to.
+ * @v: Unused parameter.
+ *
+ * This debugfs entry shows the state of the given endpoint (one is
+ * registered for each available).
+ */
+static int ep_show(struct seq_file *seq, void *v)
+{
+ struct s3c_hsotg_ep *ep = seq->private;
+ struct dwc2_hsotg *hsotg = ep->parent;
+ struct s3c_hsotg_req *req;
+ void __iomem *regs = hsotg->regs;
+ int index = ep->index;
+ int show_limit = 15;
+ unsigned long flags;
+
+ seq_printf(seq, "Endpoint index %d, named %s, dir %s:\n",
+ ep->index, ep->ep.name, decode_direction(ep->dir_in));
+
+ /* first show the register state */
+
+ seq_printf(seq, "\tDIEPCTL=0x%08x, DOEPCTL=0x%08x\n",
+ readl(regs + DIEPCTL(index)),
+ readl(regs + DOEPCTL(index)));
+
+ seq_printf(seq, "\tDIEPDMA=0x%08x, DOEPDMA=0x%08x\n",
+ readl(regs + DIEPDMA(index)),
+ readl(regs + DOEPDMA(index)));
+
+ seq_printf(seq, "\tDIEPINT=0x%08x, DOEPINT=0x%08x\n",
+ readl(regs + DIEPINT(index)),
+ readl(regs + DOEPINT(index)));
+
+ seq_printf(seq, "\tDIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x\n",
+ readl(regs + DIEPTSIZ(index)),
+ readl(regs + DOEPTSIZ(index)));
+
+ seq_puts(seq, "\n");
+ seq_printf(seq, "mps %d\n", ep->ep.maxpacket);
+ seq_printf(seq, "total_data=%ld\n", ep->total_data);
+
+ seq_printf(seq, "request list (%p,%p):\n",
+ ep->queue.next, ep->queue.prev);
+
+ spin_lock_irqsave(&hsotg->lock, flags);
+
+ list_for_each_entry(req, &ep->queue, queue) {
+ if (--show_limit < 0) {
+ seq_puts(seq, "not showing more requests...\n");
+ break;
+ }
+
+ seq_printf(seq, "%c req %p: %d bytes @%p, ",
+ req == ep->req ? '*' : ' ',
+ req, req->req.length, req->req.buf);
+ seq_printf(seq, "%d done, res %d\n",
+ req->req.actual, req->req.status);
+ }
+
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+
+ return 0;
+}
+
+static int ep_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ep_show, inode->i_private);
+}
+
+static const struct file_operations ep_fops = {
+ .owner = THIS_MODULE,
+ .open = ep_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+/**
+ * s3c_hsotg_create_debug - create debugfs directory and files
+ * @hsotg: The driver state
+ *
+ * Create the debugfs files to allow the user to get information
+ * about the state of the system. The directory name is created
+ * with the same name as the device itself, in case we end up
+ * with multiple blocks in future systems.
+ */
+static void s3c_hsotg_create_debug(struct dwc2_hsotg *hsotg)
+{
+ struct dentry *root;
+ struct dentry *file;
+ unsigned epidx;
+
+ root = hsotg->debug_root;
+
+ /* create general state file */
+
+ file = debugfs_create_file("state", S_IRUGO, root, hsotg, &state_fops);
+ if (IS_ERR(file))
+ dev_err(hsotg->dev, "%s: failed to create state\n", __func__);
+
+ file = debugfs_create_file("testmode", S_IRUGO | S_IWUSR, root, hsotg,
+ &testmode_fops);
+ if (IS_ERR(file))
+ dev_err(hsotg->dev, "%s: failed to create testmode\n",
+ __func__);
+
+ file = debugfs_create_file("fifo", S_IRUGO, root, hsotg, &fifo_fops);
+ if (IS_ERR(file))
+ dev_err(hsotg->dev, "%s: failed to create fifo\n", __func__);
+
+ /* Create one file for each out endpoint */
+ for (epidx = 0; epidx < hsotg->num_of_eps; epidx++) {
+ struct s3c_hsotg_ep *ep;
+
+ ep = hsotg->eps_out[epidx];
+ if (ep) {
+ file = debugfs_create_file(ep->name, S_IRUGO,
+ root, ep, &ep_fops);
+ if (IS_ERR(file))
+ dev_err(hsotg->dev, "failed to create %s debug file\n",
+ ep->name);
+ }
+ }
+ /* Create one file for each in endpoint. EP0 is handled with out eps */
+ for (epidx = 1; epidx < hsotg->num_of_eps; epidx++) {
+ struct s3c_hsotg_ep *ep;
+
+ ep = hsotg->eps_in[epidx];
+ if (ep) {
+ file = debugfs_create_file(ep->name, S_IRUGO,
+ root, ep, &ep_fops);
+ if (IS_ERR(file))
+ dev_err(hsotg->dev, "failed to create %s debug file\n",
+ ep->name);
+ }
+ }
+}
+#else
+static inline void s3c_hsotg_create_debug(struct dwc2_hsotg *hsotg) {}
+#endif
+
+/* s3c_hsotg_delete_debug is removed as cleanup in done in dwc2_debugfs_exit */
+
+int dwc2_debugfs_init(struct dwc2_hsotg *hsotg)
+{
+ int ret;
+
+ hsotg->debug_root = debugfs_create_dir(dev_name(hsotg->dev), NULL);
+ if (!hsotg->debug_root) {
+ ret = -ENOMEM;
+ goto err0;
+ }
+
+ /* Add gadget debugfs nodes */
+ s3c_hsotg_create_debug(hsotg);
+err0:
+ return ret;
+}
+EXPORT_SYMBOL_GPL(dwc2_debugfs_init);
+
+void dwc2_debugfs_exit(struct dwc2_hsotg *hsotg)
+{
+ debugfs_remove_recursive(hsotg->debug_root);
+ hsotg->debug_root = NULL;
+}
+EXPORT_SYMBOL_GPL(dwc2_debugfs_exit);
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-#include <linux/debugfs.h>
#include <linux/mutex.h>
#include <linux/seq_file.h>
#include <linux/delay.h>
#include <linux/usb/gadget.h>
#include <linux/usb/phy.h>
#include <linux/platform_data/s3c-hsotg.h>
-#include <linux/uaccess.h>
#include "core.h"
#include "hw.h"
* @testmode: requested usb test mode
* Enable usb Test Mode requested by the Host.
*/
-static int s3c_hsotg_set_test_mode(struct dwc2_hsotg *hsotg, int testmode)
+int s3c_hsotg_set_test_mode(struct dwc2_hsotg *hsotg, int testmode)
{
int dctl = readl(hsotg->regs + DCTL);
#endif
}
-/**
- * testmode_write - debugfs: change usb test mode
- * @seq: The seq file to write to.
- * @v: Unused parameter.
- *
- * This debugfs entry modify the current usb test mode.
- */
-static ssize_t testmode_write(struct file *file, const char __user *ubuf, size_t
- count, loff_t *ppos)
-{
- struct seq_file *s = file->private_data;
- struct dwc2_hsotg *hsotg = s->private;
- unsigned long flags;
- u32 testmode = 0;
- char buf[32];
-
- if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
- return -EFAULT;
-
- if (!strncmp(buf, "test_j", 6))
- testmode = TEST_J;
- else if (!strncmp(buf, "test_k", 6))
- testmode = TEST_K;
- else if (!strncmp(buf, "test_se0_nak", 12))
- testmode = TEST_SE0_NAK;
- else if (!strncmp(buf, "test_packet", 11))
- testmode = TEST_PACKET;
- else if (!strncmp(buf, "test_force_enable", 17))
- testmode = TEST_FORCE_EN;
- else
- testmode = 0;
-
- spin_lock_irqsave(&hsotg->lock, flags);
- s3c_hsotg_set_test_mode(hsotg, testmode);
- spin_unlock_irqrestore(&hsotg->lock, flags);
- return count;
-}
-
-/**
- * testmode_show - debugfs: show usb test mode state
- * @seq: The seq file to write to.
- * @v: Unused parameter.
- *
- * This debugfs entry shows which usb test mode is currently enabled.
- */
-static int testmode_show(struct seq_file *s, void *unused)
-{
- struct dwc2_hsotg *hsotg = s->private;
- unsigned long flags;
- int dctl;
-
- spin_lock_irqsave(&hsotg->lock, flags);
- dctl = readl(hsotg->regs + DCTL);
- dctl &= DCTL_TSTCTL_MASK;
- dctl >>= DCTL_TSTCTL_SHIFT;
- spin_unlock_irqrestore(&hsotg->lock, flags);
-
- switch (dctl) {
- case 0:
- seq_puts(s, "no test\n");
- break;
- case TEST_J:
- seq_puts(s, "test_j\n");
- break;
- case TEST_K:
- seq_puts(s, "test_k\n");
- break;
- case TEST_SE0_NAK:
- seq_puts(s, "test_se0_nak\n");
- break;
- case TEST_PACKET:
- seq_puts(s, "test_packet\n");
- break;
- case TEST_FORCE_EN:
- seq_puts(s, "test_force_enable\n");
- break;
- default:
- seq_printf(s, "UNKNOWN %d\n", dctl);
- }
-
- return 0;
-}
-
-static int testmode_open(struct inode *inode, struct file *file)
-{
- return single_open(file, testmode_show, inode->i_private);
-}
-
-static const struct file_operations testmode_fops = {
- .owner = THIS_MODULE,
- .open = testmode_open,
- .write = testmode_write,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-/**
- * state_show - debugfs: show overall driver and device state.
- * @seq: The seq file to write to.
- * @v: Unused parameter.
- *
- * This debugfs entry shows the overall state of the hardware and
- * some general information about each of the endpoints available
- * to the system.
- */
-static int state_show(struct seq_file *seq, void *v)
-{
- struct dwc2_hsotg *hsotg = seq->private;
- void __iomem *regs = hsotg->regs;
- int idx;
-
- seq_printf(seq, "DCFG=0x%08x, DCTL=0x%08x, DSTS=0x%08x\n",
- readl(regs + DCFG),
- readl(regs + DCTL),
- readl(regs + DSTS));
-
- seq_printf(seq, "DIEPMSK=0x%08x, DOEPMASK=0x%08x\n",
- readl(regs + DIEPMSK), readl(regs + DOEPMSK));
-
- seq_printf(seq, "GINTMSK=0x%08x, GINTSTS=0x%08x\n",
- readl(regs + GINTMSK),
- readl(regs + GINTSTS));
-
- seq_printf(seq, "DAINTMSK=0x%08x, DAINT=0x%08x\n",
- readl(regs + DAINTMSK),
- readl(regs + DAINT));
-
- seq_printf(seq, "GNPTXSTS=0x%08x, GRXSTSR=%08x\n",
- readl(regs + GNPTXSTS),
- readl(regs + GRXSTSR));
-
- seq_puts(seq, "\nEndpoint status:\n");
-
- for (idx = 0; idx < hsotg->num_of_eps; idx++) {
- u32 in, out;
-
- in = readl(regs + DIEPCTL(idx));
- out = readl(regs + DOEPCTL(idx));
-
- seq_printf(seq, "ep%d: DIEPCTL=0x%08x, DOEPCTL=0x%08x",
- idx, in, out);
-
- in = readl(regs + DIEPTSIZ(idx));
- out = readl(regs + DOEPTSIZ(idx));
-
- seq_printf(seq, ", DIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x",
- in, out);
-
- seq_puts(seq, "\n");
- }
-
- return 0;
-}
-
-static int state_open(struct inode *inode, struct file *file)
-{
- return single_open(file, state_show, inode->i_private);
-}
-
-static const struct file_operations state_fops = {
- .owner = THIS_MODULE,
- .open = state_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-/**
- * fifo_show - debugfs: show the fifo information
- * @seq: The seq_file to write data to.
- * @v: Unused parameter.
- *
- * Show the FIFO information for the overall fifo and all the
- * periodic transmission FIFOs.
- */
-static int fifo_show(struct seq_file *seq, void *v)
-{
- struct dwc2_hsotg *hsotg = seq->private;
- void __iomem *regs = hsotg->regs;
- u32 val;
- int idx;
-
- seq_puts(seq, "Non-periodic FIFOs:\n");
- seq_printf(seq, "RXFIFO: Size %d\n", readl(regs + GRXFSIZ));
-
- val = readl(regs + GNPTXFSIZ);
- seq_printf(seq, "NPTXFIFO: Size %d, Start 0x%08x\n",
- val >> FIFOSIZE_DEPTH_SHIFT,
- val & FIFOSIZE_DEPTH_MASK);
-
- seq_puts(seq, "\nPeriodic TXFIFOs:\n");
-
- for (idx = 1; idx < hsotg->num_of_eps; idx++) {
- val = readl(regs + DPTXFSIZN(idx));
-
- seq_printf(seq, "\tDPTXFIFO%2d: Size %d, Start 0x%08x\n", idx,
- val >> FIFOSIZE_DEPTH_SHIFT,
- val & FIFOSIZE_STARTADDR_MASK);
- }
-
- return 0;
-}
-
-static int fifo_open(struct inode *inode, struct file *file)
-{
- return single_open(file, fifo_show, inode->i_private);
-}
-
-static const struct file_operations fifo_fops = {
- .owner = THIS_MODULE,
- .open = fifo_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-
-static const char *decode_direction(int is_in)
-{
- return is_in ? "in" : "out";
-}
-
-/**
- * ep_show - debugfs: show the state of an endpoint.
- * @seq: The seq_file to write data to.
- * @v: Unused parameter.
- *
- * This debugfs entry shows the state of the given endpoint (one is
- * registered for each available).
- */
-static int ep_show(struct seq_file *seq, void *v)
-{
- struct s3c_hsotg_ep *ep = seq->private;
- struct dwc2_hsotg *hsotg = ep->parent;
- struct s3c_hsotg_req *req;
- void __iomem *regs = hsotg->regs;
- int index = ep->index;
- int show_limit = 15;
- unsigned long flags;
-
- seq_printf(seq, "Endpoint index %d, named %s, dir %s:\n",
- ep->index, ep->ep.name, decode_direction(ep->dir_in));
-
- /* first show the register state */
-
- seq_printf(seq, "\tDIEPCTL=0x%08x, DOEPCTL=0x%08x\n",
- readl(regs + DIEPCTL(index)),
- readl(regs + DOEPCTL(index)));
-
- seq_printf(seq, "\tDIEPDMA=0x%08x, DOEPDMA=0x%08x\n",
- readl(regs + DIEPDMA(index)),
- readl(regs + DOEPDMA(index)));
-
- seq_printf(seq, "\tDIEPINT=0x%08x, DOEPINT=0x%08x\n",
- readl(regs + DIEPINT(index)),
- readl(regs + DOEPINT(index)));
-
- seq_printf(seq, "\tDIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x\n",
- readl(regs + DIEPTSIZ(index)),
- readl(regs + DOEPTSIZ(index)));
-
- seq_puts(seq, "\n");
- seq_printf(seq, "mps %d\n", ep->ep.maxpacket);
- seq_printf(seq, "total_data=%ld\n", ep->total_data);
-
- seq_printf(seq, "request list (%p,%p):\n",
- ep->queue.next, ep->queue.prev);
-
- spin_lock_irqsave(&hsotg->lock, flags);
-
- list_for_each_entry(req, &ep->queue, queue) {
- if (--show_limit < 0) {
- seq_puts(seq, "not showing more requests...\n");
- break;
- }
-
- seq_printf(seq, "%c req %p: %d bytes @%p, ",
- req == ep->req ? '*' : ' ',
- req, req->req.length, req->req.buf);
- seq_printf(seq, "%d done, res %d\n",
- req->req.actual, req->req.status);
- }
-
- spin_unlock_irqrestore(&hsotg->lock, flags);
-
- return 0;
-}
-
-static int ep_open(struct inode *inode, struct file *file)
-{
- return single_open(file, ep_show, inode->i_private);
-}
-
-static const struct file_operations ep_fops = {
- .owner = THIS_MODULE,
- .open = ep_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-/**
- * s3c_hsotg_create_debug - create debugfs directory and files
- * @hsotg: The driver state
- *
- * Create the debugfs files to allow the user to get information
- * about the state of the system. The directory name is created
- * with the same name as the device itself, in case we end up
- * with multiple blocks in future systems.
- */
-static void s3c_hsotg_create_debug(struct dwc2_hsotg *hsotg)
-{
- struct dentry *root;
- unsigned epidx;
-
- root = debugfs_create_dir(dev_name(hsotg->dev), NULL);
- hsotg->debug_root = root;
- if (IS_ERR(root)) {
- dev_err(hsotg->dev, "cannot create debug root\n");
- return;
- }
-
- /* create general state file */
-
- hsotg->debug_file = debugfs_create_file("state", S_IRUGO, root,
- hsotg, &state_fops);
-
- if (IS_ERR(hsotg->debug_file))
- dev_err(hsotg->dev, "%s: failed to create state\n", __func__);
-
- hsotg->debug_testmode = debugfs_create_file("testmode",
- S_IRUGO | S_IWUSR, root,
- hsotg, &testmode_fops);
-
- if (IS_ERR(hsotg->debug_testmode))
- dev_err(hsotg->dev, "%s: failed to create testmode\n",
- __func__);
-
- hsotg->debug_fifo = debugfs_create_file("fifo", S_IRUGO, root,
- hsotg, &fifo_fops);
-
- if (IS_ERR(hsotg->debug_fifo))
- dev_err(hsotg->dev, "%s: failed to create fifo\n", __func__);
-
- /* Create one file for each out endpoint */
- for (epidx = 0; epidx < hsotg->num_of_eps; epidx++) {
- struct s3c_hsotg_ep *ep;
-
- ep = hsotg->eps_out[epidx];
- if (ep) {
- ep->debugfs = debugfs_create_file(ep->name, S_IRUGO,
- root, ep, &ep_fops);
-
- if (IS_ERR(ep->debugfs))
- dev_err(hsotg->dev, "failed to create %s debug file\n",
- ep->name);
- }
- }
- /* Create one file for each in endpoint. EP0 is handled with out eps */
- for (epidx = 1; epidx < hsotg->num_of_eps; epidx++) {
- struct s3c_hsotg_ep *ep;
-
- ep = hsotg->eps_in[epidx];
- if (ep) {
- ep->debugfs = debugfs_create_file(ep->name, S_IRUGO,
- root, ep, &ep_fops);
-
- if (IS_ERR(ep->debugfs))
- dev_err(hsotg->dev, "failed to create %s debug file\n",
- ep->name);
- }
- }
-}
-
-/**
- * s3c_hsotg_delete_debug - cleanup debugfs entries
- * @hsotg: The driver state
- *
- * Cleanup (remove) the debugfs files for use on module exit.
- */
-static void s3c_hsotg_delete_debug(struct dwc2_hsotg *hsotg)
-{
- unsigned epidx;
-
- for (epidx = 0; epidx < hsotg->num_of_eps; epidx++) {
- if (hsotg->eps_in[epidx])
- debugfs_remove(hsotg->eps_in[epidx]->debugfs);
- if (hsotg->eps_out[epidx])
- debugfs_remove(hsotg->eps_out[epidx]->debugfs);
- }
-
- debugfs_remove(hsotg->debug_file);
- debugfs_remove(hsotg->debug_testmode);
- debugfs_remove(hsotg->debug_fifo);
- debugfs_remove(hsotg->debug_root);
-}
-
#ifdef CONFIG_OF
static void s3c_hsotg_of_probe(struct dwc2_hsotg *hsotg)
{
if (ret)
goto err_supplies;
- s3c_hsotg_create_debug(hsotg);
-
s3c_hsotg_dump(hsotg);
return 0;
int s3c_hsotg_remove(struct dwc2_hsotg *hsotg)
{
usb_del_gadget_udc(&hsotg->gadget);
- s3c_hsotg_delete_debug(hsotg);
clk_disable_unprepare(hsotg->clk);
return 0;
#include "core.h"
#include "hcd.h"
+#include "debug.h"
static const char dwc2_driver_name[] = "dwc2";
{
struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);
+ dwc2_debugfs_exit(hsotg);
if (hsotg->hcd_enabled)
dwc2_hcd_remove(hsotg);
if (hsotg->gadget_enabled)
platform_set_drvdata(dev, hsotg);
+ dwc2_debugfs_init(hsotg);
+
return retval;
}
projects / mirror_ubuntu-zesty-kernel.git / commitdiff