event to the kernel. The payload is of type struct uhid_create_req and
contains information about your device. You can start I/O now.
+ UHID_CREATE2:
+ Same as UHID_CREATE, but the HID report descriptor data (rd_data) is an array
+ inside struct uhid_create2_req, instead of a pointer to a separate array.
+ Enables use from languages that don't support pointers, e.g. Python.
+
UHID_DESTROY:
This destroys the internal HID device. No further I/O will be accepted. There
may still be pending messages that you can receive with read() but no further
contains a data-payload. This is the raw data that you read from your device.
The kernel will parse the HID reports and react on it.
+ UHID_INPUT2:
+ Same as UHID_INPUT, but the data array is the last field of uhid_input2_req.
+ Enables userspace to write only the required bytes to kernel (ev.type +
+ ev.u.input2.size + the part of the data array that matters), instead of
+ the entire struct uhid_input2_req.
+
UHID_FEATURE_ANSWER:
If you receive a UHID_FEATURE request you must answer with this request. You
must copy the "id" field from the request into the answer. Set the "err" field
multimedia keyboard, but will lack support for the musical keyboard
and some additional multimedia keys.
+config HID_CP2112
+ tristate "Silicon Labs CP2112 HID USB-to-SMBus Bridge support"
+ depends on USB_HID && I2C && GPIOLIB
+ ---help---
+ Support for Silicon Labs CP2112 HID USB to SMBus Master Bridge.
+ This is a HID device driver which registers as an i2c adapter
+ and gpiochip to expose these functions of the CP2112. The
+ customizable USB descriptor fields are exposed as sysfs attributes.
+
config HID_CYPRESS
tristate "Cypress mouse and barcode readers" if EXPERT
depends on HID
Support for Samsung InfraRed remote control or keyboards.
config HID_SONY
- tristate "Sony PS2/3 accessories"
+ tristate "Sony PS2/3/4 accessories"
depends on USB_HID
depends on NEW_LEDS
depends on LEDS_CLASS
+ select POWER_SUPPLY
---help---
Support for
* Sony PS3 6-axis controllers
+ * Sony PS4 DualShock 4 controllers
* Buzz controllers
* Sony PS3 Blue-ray Disk Remote Control (Bluetooth)
* Logitech Harmony adapter for Sony Playstation 3 (Bluetooth)
config SONY_FF
- bool "Sony PS2/3 accessories force feedback support"
+ bool "Sony PS2/3/4 accessories force feedback support"
depends on HID_SONY
select INPUT_FF_MEMLESS
---help---
- Say Y here if you have a Sony PS2/3 accessory and want to enable force
- feedback support for it.
+ Say Y here if you have a Sony PS2/3/4 accessory and want to enable
+ force feedback support for it.
config HID_SPEEDLINK
tristate "Speedlink VAD Cezanne mouse support"
obj-$(CONFIG_HID_BELKIN) += hid-belkin.o
obj-$(CONFIG_HID_CHERRY) += hid-cherry.o
obj-$(CONFIG_HID_CHICONY) += hid-chicony.o
+obj-$(CONFIG_HID_CP2112) += hid-cp2112.o
obj-$(CONFIG_HID_CYPRESS) += hid-cypress.o
obj-$(CONFIG_HID_DRAGONRISE) += hid-dr.o
obj-$(CONFIG_HID_EMS_FF) += hid-emsff.o
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE,
USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ANSI),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE,
+ USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_JIS),
+ .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI),
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ANSI) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ISO) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_JIS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_AUREAL, USB_DEVICE_ID_AUREAL_W01RN) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_AK1D) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_PRODIKEYS_PCMIDI) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_CP2112) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_1) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_3) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_USB) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_DIGITAL_MEDIA_3K) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_WIRELESS_OPTICAL_DESKTOP_3_0) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_2) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TOUCH_COVER_2) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_OFFICE_KB) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MONTEREY, USB_DEVICE_ID_GENIUS_KB29E) },
{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN) },
{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_1) },
--- /dev/null
+/*
+ * hid-cp2112.c - Silicon Labs HID USB to SMBus master bridge
+ * Copyright (c) 2013,2014 Uplogix, Inc.
+ * David Barksdale <dbarksdale@uplogix.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+/*
+ * The Silicon Labs CP2112 chip is a USB HID device which provides an
+ * SMBus controller for talking to slave devices and 8 GPIO pins. The
+ * host communicates with the CP2112 via raw HID reports.
+ *
+ * Data Sheet:
+ * http://www.silabs.com/Support%20Documents/TechnicalDocs/CP2112.pdf
+ * Programming Interface Specification:
+ * http://www.silabs.com/Support%20Documents/TechnicalDocs/AN495.pdf
+ */
+
+#include <linux/gpio.h>
+#include <linux/hid.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/nls.h>
+#include <linux/usb/ch9.h>
+#include "hid-ids.h"
+
+enum {
+ CP2112_GPIO_CONFIG = 0x02,
+ CP2112_GPIO_GET = 0x03,
+ CP2112_GPIO_SET = 0x04,
+ CP2112_GET_VERSION_INFO = 0x05,
+ CP2112_SMBUS_CONFIG = 0x06,
+ CP2112_DATA_READ_REQUEST = 0x10,
+ CP2112_DATA_WRITE_READ_REQUEST = 0x11,
+ CP2112_DATA_READ_FORCE_SEND = 0x12,
+ CP2112_DATA_READ_RESPONSE = 0x13,
+ CP2112_DATA_WRITE_REQUEST = 0x14,
+ CP2112_TRANSFER_STATUS_REQUEST = 0x15,
+ CP2112_TRANSFER_STATUS_RESPONSE = 0x16,
+ CP2112_CANCEL_TRANSFER = 0x17,
+ CP2112_LOCK_BYTE = 0x20,
+ CP2112_USB_CONFIG = 0x21,
+ CP2112_MANUFACTURER_STRING = 0x22,
+ CP2112_PRODUCT_STRING = 0x23,
+ CP2112_SERIAL_STRING = 0x24,
+};
+
+enum {
+ STATUS0_IDLE = 0x00,
+ STATUS0_BUSY = 0x01,
+ STATUS0_COMPLETE = 0x02,
+ STATUS0_ERROR = 0x03,
+};
+
+enum {
+ STATUS1_TIMEOUT_NACK = 0x00,
+ STATUS1_TIMEOUT_BUS = 0x01,
+ STATUS1_ARBITRATION_LOST = 0x02,
+ STATUS1_READ_INCOMPLETE = 0x03,
+ STATUS1_WRITE_INCOMPLETE = 0x04,
+ STATUS1_SUCCESS = 0x05,
+};
+
+struct cp2112_smbus_config_report {
+ u8 report; /* CP2112_SMBUS_CONFIG */
+ __be32 clock_speed; /* Hz */
+ u8 device_address; /* Stored in the upper 7 bits */
+ u8 auto_send_read; /* 1 = enabled, 0 = disabled */
+ __be16 write_timeout; /* ms, 0 = no timeout */
+ __be16 read_timeout; /* ms, 0 = no timeout */
+ u8 scl_low_timeout; /* 1 = enabled, 0 = disabled */
+ __be16 retry_time; /* # of retries, 0 = no limit */
+} __packed;
+
+struct cp2112_usb_config_report {
+ u8 report; /* CP2112_USB_CONFIG */
+ __le16 vid; /* Vendor ID */
+ __le16 pid; /* Product ID */
+ u8 max_power; /* Power requested in 2mA units */
+ u8 power_mode; /* 0x00 = bus powered
+ 0x01 = self powered & regulator off
+ 0x02 = self powered & regulator on */
+ u8 release_major;
+ u8 release_minor;
+ u8 mask; /* What fields to program */
+} __packed;
+
+struct cp2112_read_req_report {
+ u8 report; /* CP2112_DATA_READ_REQUEST */
+ u8 slave_address;
+ __be16 length;
+} __packed;
+
+struct cp2112_write_read_req_report {
+ u8 report; /* CP2112_DATA_WRITE_READ_REQUEST */
+ u8 slave_address;
+ __be16 length;
+ u8 target_address_length;
+ u8 target_address[16];
+} __packed;
+
+struct cp2112_write_req_report {
+ u8 report; /* CP2112_DATA_WRITE_REQUEST */
+ u8 slave_address;
+ u8 length;
+ u8 data[61];
+} __packed;
+
+struct cp2112_force_read_report {
+ u8 report; /* CP2112_DATA_READ_FORCE_SEND */
+ __be16 length;
+} __packed;
+
+struct cp2112_xfer_status_report {
+ u8 report; /* CP2112_TRANSFER_STATUS_RESPONSE */
+ u8 status0; /* STATUS0_* */
+ u8 status1; /* STATUS1_* */
+ __be16 retries;
+ __be16 length;
+} __packed;
+
+struct cp2112_string_report {
+ u8 dummy; /* force .string to be aligned */
+ u8 report; /* CP2112_*_STRING */
+ u8 length; /* length in bytes of everyting after .report */
+ u8 type; /* USB_DT_STRING */
+ wchar_t string[30]; /* UTF16_LITTLE_ENDIAN string */
+} __packed;
+
+/* Number of times to request transfer status before giving up waiting for a
+ transfer to complete. This may need to be changed if SMBUS clock, retries,
+ or read/write/scl_low timeout settings are changed. */
+static const int XFER_STATUS_RETRIES = 10;
+
+/* Time in ms to wait for a CP2112_DATA_READ_RESPONSE or
+ CP2112_TRANSFER_STATUS_RESPONSE. */
+static const int RESPONSE_TIMEOUT = 50;
+
+static const struct hid_device_id cp2112_devices[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_CP2112) },
+ { }
+};
+MODULE_DEVICE_TABLE(hid, cp2112_devices);
+
+struct cp2112_device {
+ struct i2c_adapter adap;
+ struct hid_device *hdev;
+ wait_queue_head_t wait;
+ u8 read_data[61];
+ u8 read_length;
+ int xfer_status;
+ atomic_t read_avail;
+ atomic_t xfer_avail;
+ struct gpio_chip gc;
+};
+
+static int gpio_push_pull = 0xFF;
+module_param(gpio_push_pull, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(gpio_push_pull, "GPIO push-pull configuration bitmask");
+
+static int cp2112_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct cp2112_device *dev = container_of(chip, struct cp2112_device,
+ gc);
+ struct hid_device *hdev = dev->hdev;
+ u8 buf[5];
+ int ret;
+
+ ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf,
+ sizeof(buf), HID_FEATURE_REPORT,
+ HID_REQ_GET_REPORT);
+ if (ret != sizeof(buf)) {
+ hid_err(hdev, "error requesting GPIO config: %d\n", ret);
+ return ret;
+ }
+
+ buf[1] &= ~(1 << offset);
+ buf[2] = gpio_push_pull;
+
+ ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf, sizeof(buf),
+ HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
+ if (ret < 0) {
+ hid_err(hdev, "error setting GPIO config: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void cp2112_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct cp2112_device *dev = container_of(chip, struct cp2112_device,
+ gc);
+ struct hid_device *hdev = dev->hdev;
+ u8 buf[3];
+ int ret;
+
+ buf[0] = CP2112_GPIO_SET;
+ buf[1] = value ? 0xff : 0;
+ buf[2] = 1 << offset;
+
+ ret = hid_hw_raw_request(hdev, CP2112_GPIO_SET, buf, sizeof(buf),
+ HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
+ if (ret < 0)
+ hid_err(hdev, "error setting GPIO values: %d\n", ret);
+}
+
+static int cp2112_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct cp2112_device *dev = container_of(chip, struct cp2112_device,
+ gc);
+ struct hid_device *hdev = dev->hdev;
+ u8 buf[2];
+ int ret;
+
+ ret = hid_hw_raw_request(hdev, CP2112_GPIO_GET, buf, sizeof(buf),
+ HID_FEATURE_REPORT, HID_REQ_GET_REPORT);
+ if (ret != sizeof(buf)) {
+ hid_err(hdev, "error requesting GPIO values: %d\n", ret);
+ return ret;
+ }
+
+ return (buf[1] >> offset) & 1;
+}
+
+static int cp2112_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct cp2112_device *dev = container_of(chip, struct cp2112_device,
+ gc);
+ struct hid_device *hdev = dev->hdev;
+ u8 buf[5];
+ int ret;
+
+ cp2112_gpio_set(chip, offset, value);
+
+ ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf,
+ sizeof(buf), HID_FEATURE_REPORT,
+ HID_REQ_GET_REPORT);
+ if (ret != sizeof(buf)) {
+ hid_err(hdev, "error requesting GPIO config: %d\n", ret);
+ return ret;
+ }
+
+ buf[1] |= 1 << offset;
+ buf[2] = gpio_push_pull;
+
+ ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf, sizeof(buf),
+ HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
+ if (ret < 0) {
+ hid_err(hdev, "error setting GPIO config: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int cp2112_hid_get(struct hid_device *hdev, unsigned char report_number,
+ u8 *data, size_t count, unsigned char report_type)
+{
+ u8 *buf;
+ int ret;
+
+ buf = kmalloc(count, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ ret = hid_hw_raw_request(hdev, report_number, buf, count,
+ report_type, HID_REQ_GET_REPORT);
+ memcpy(data, buf, count);
+ kfree(buf);
+ return ret;
+}
+
+static int cp2112_hid_output(struct hid_device *hdev, u8 *data, size_t count,
+ unsigned char report_type)
+{
+ u8 *buf;
+ int ret;
+
+ buf = kmemdup(data, count, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ if (report_type == HID_OUTPUT_REPORT)
+ ret = hid_hw_output_report(hdev, buf, count);
+ else
+ ret = hid_hw_raw_request(hdev, buf[0], buf, count, report_type,
+ HID_REQ_SET_REPORT);
+
+ kfree(buf);
+ return ret;
+}
+
+static int cp2112_wait(struct cp2112_device *dev, atomic_t *avail)
+{
+ int ret = 0;
+
+ /* We have sent either a CP2112_TRANSFER_STATUS_REQUEST or a
+ * CP2112_DATA_READ_FORCE_SEND and we are waiting for the response to
+ * come in cp2112_raw_event or timeout. There will only be one of these
+ * in flight at any one time. The timeout is extremely large and is a
+ * last resort if the CP2112 has died. If we do timeout we don't expect
+ * to receive the response which would cause data races, it's not like
+ * we can do anything about it anyway.
+ */
+ ret = wait_event_interruptible_timeout(dev->wait,
+ atomic_read(avail), msecs_to_jiffies(RESPONSE_TIMEOUT));
+ if (-ERESTARTSYS == ret)
+ return ret;
+ if (!ret)
+ return -ETIMEDOUT;
+
+ atomic_set(avail, 0);
+ return 0;
+}
+
+static int cp2112_xfer_status(struct cp2112_device *dev)
+{
+ struct hid_device *hdev = dev->hdev;
+ u8 buf[2];
+ int ret;
+
+ buf[0] = CP2112_TRANSFER_STATUS_REQUEST;
+ buf[1] = 0x01;
+ atomic_set(&dev->xfer_avail, 0);
+
+ ret = cp2112_hid_output(hdev, buf, 2, HID_OUTPUT_REPORT);
+ if (ret < 0) {
+ hid_warn(hdev, "Error requesting status: %d\n", ret);
+ return ret;
+ }
+
+ ret = cp2112_wait(dev, &dev->xfer_avail);
+ if (ret)
+ return ret;
+
+ return dev->xfer_status;
+}
+
+static int cp2112_read(struct cp2112_device *dev, u8 *data, size_t size)
+{
+ struct hid_device *hdev = dev->hdev;
+ struct cp2112_force_read_report report;
+ int ret;
+
+ report.report = CP2112_DATA_READ_FORCE_SEND;
+ report.length = cpu_to_be16(size);
+
+ atomic_set(&dev->read_avail, 0);
+
+ ret = cp2112_hid_output(hdev, &report.report, sizeof(report),
+ HID_OUTPUT_REPORT);
+ if (ret < 0) {
+ hid_warn(hdev, "Error requesting data: %d\n", ret);
+ return ret;
+ }
+
+ ret = cp2112_wait(dev, &dev->read_avail);
+ if (ret)
+ return ret;
+
+ hid_dbg(hdev, "read %d of %zd bytes requested\n",
+ dev->read_length, size);
+
+ if (size > dev->read_length)
+ size = dev->read_length;
+
+ memcpy(data, dev->read_data, size);
+ return dev->read_length;
+}
+
+static int cp2112_read_req(void *buf, u8 slave_address, u16 length)
+{
+ struct cp2112_read_req_report *report = buf;
+
+ if (length < 1 || length > 512)
+ return -EINVAL;
+
+ report->report = CP2112_DATA_READ_REQUEST;
+ report->slave_address = slave_address << 1;
+ report->length = cpu_to_be16(length);
+ return sizeof(*report);
+}
+
+static int cp2112_write_read_req(void *buf, u8 slave_address, u16 length,
+ u8 command, u8 *data, u8 data_length)
+{
+ struct cp2112_write_read_req_report *report = buf;
+
+ if (length < 1 || length > 512
+ || data_length > sizeof(report->target_address) - 1)
+ return -EINVAL;
+
+ report->report = CP2112_DATA_WRITE_READ_REQUEST;
+ report->slave_address = slave_address << 1;
+ report->length = cpu_to_be16(length);
+ report->target_address_length = data_length + 1;
+ report->target_address[0] = command;
+ memcpy(&report->target_address[1], data, data_length);
+ return data_length + 6;
+}
+
+static int cp2112_write_req(void *buf, u8 slave_address, u8 command, u8 *data,
+ u8 data_length)
+{
+ struct cp2112_write_req_report *report = buf;
+
+ if (data_length > sizeof(report->data) - 1)
+ return -EINVAL;
+
+ report->report = CP2112_DATA_WRITE_REQUEST;
+ report->slave_address = slave_address << 1;
+ report->length = data_length + 1;
+ report->data[0] = command;
+ memcpy(&report->data[1], data, data_length);
+ return data_length + 4;
+}
+
+static int cp2112_xfer(struct i2c_adapter *adap, u16 addr,
+ unsigned short flags, char read_write, u8 command,
+ int size, union i2c_smbus_data *data)
+{
+ struct cp2112_device *dev = (struct cp2112_device *)adap->algo_data;
+ struct hid_device *hdev = dev->hdev;
+ u8 buf[64];
+ __be16 word;
+ ssize_t count;
+ size_t read_length = 0;
+ unsigned int retries;
+ int ret;
+
+ hid_dbg(hdev, "%s addr 0x%x flags 0x%x cmd 0x%x size %d\n",
+ read_write == I2C_SMBUS_WRITE ? "write" : "read",
+ addr, flags, command, size);
+
+ switch (size) {
+ case I2C_SMBUS_BYTE:
+ read_length = 1;
+
+ if (I2C_SMBUS_READ == read_write)
+ count = cp2112_read_req(buf, addr, read_length);
+ else
+ count = cp2112_write_req(buf, addr, data->byte, NULL,
+ 0);
+ break;
+ case I2C_SMBUS_BYTE_DATA:
+ read_length = 1;
+
+ if (I2C_SMBUS_READ == read_write)
+ count = cp2112_write_read_req(buf, addr, read_length,
+ command, NULL, 0);
+ else
+ count = cp2112_write_req(buf, addr, command,
+ &data->byte, 1);
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ read_length = 2;
+ word = cpu_to_be16(data->word);
+
+ if (I2C_SMBUS_READ == read_write)
+ count = cp2112_write_read_req(buf, addr, read_length,
+ command, NULL, 0);
+ else
+ count = cp2112_write_req(buf, addr, command,
+ (u8 *)&word, 2);
+ break;
+ case I2C_SMBUS_PROC_CALL:
+ size = I2C_SMBUS_WORD_DATA;
+ read_write = I2C_SMBUS_READ;
+ read_length = 2;
+ word = cpu_to_be16(data->word);
+
+ count = cp2112_write_read_req(buf, addr, read_length, command,
+ (u8 *)&word, 2);
+ break;
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ size = I2C_SMBUS_BLOCK_DATA;
+ /* fallthrough */
+ case I2C_SMBUS_BLOCK_DATA:
+ if (I2C_SMBUS_READ == read_write) {
+ count = cp2112_write_read_req(buf, addr,
+ I2C_SMBUS_BLOCK_MAX,
+ command, NULL, 0);
+ } else {
+ count = cp2112_write_req(buf, addr, command,
+ data->block,
+ data->block[0] + 1);
+ }
+ break;
+ case I2C_SMBUS_BLOCK_PROC_CALL:
+ size = I2C_SMBUS_BLOCK_DATA;
+ read_write = I2C_SMBUS_READ;
+
+ count = cp2112_write_read_req(buf, addr, I2C_SMBUS_BLOCK_MAX,
+ command, data->block,
+ data->block[0] + 1);
+ break;
+ default:
+ hid_warn(hdev, "Unsupported transaction %d\n", size);
+ return -EOPNOTSUPP;
+ }
+
+ if (count < 0)
+ return count;
+
+ ret = hid_hw_power(hdev, PM_HINT_FULLON);
+ if (ret < 0) {
+ hid_err(hdev, "power management error: %d\n", ret);
+ return ret;
+ }
+
+ ret = cp2112_hid_output(hdev, buf, count, HID_OUTPUT_REPORT);
+ if (ret < 0) {
+ hid_warn(hdev, "Error starting transaction: %d\n", ret);
+ goto power_normal;
+ }
+
+ for (retries = 0; retries < XFER_STATUS_RETRIES; ++retries) {
+ ret = cp2112_xfer_status(dev);
+ if (-EBUSY == ret)
+ continue;
+ if (ret < 0)
+ goto power_normal;
+ break;
+ }
+
+ if (XFER_STATUS_RETRIES <= retries) {
+ hid_warn(hdev, "Transfer timed out, cancelling.\n");
+ buf[0] = CP2112_CANCEL_TRANSFER;
+ buf[1] = 0x01;
+
+ ret = cp2112_hid_output(hdev, buf, 2, HID_OUTPUT_REPORT);
+ if (ret < 0)
+ hid_warn(hdev, "Error cancelling transaction: %d\n",
+ ret);
+
+ ret = -ETIMEDOUT;
+ goto power_normal;
+ }
+
+ if (I2C_SMBUS_WRITE == read_write) {
+ ret = 0;
+ goto power_normal;
+ }
+
+ if (I2C_SMBUS_BLOCK_DATA == size)
+ read_length = ret;
+
+ ret = cp2112_read(dev, buf, read_length);
+ if (ret < 0)
+ goto power_normal;
+ if (ret != read_length) {
+ hid_warn(hdev, "short read: %d < %zd\n", ret, read_length);
+ ret = -EIO;
+ goto power_normal;
+ }
+
+ switch (size) {
+ case I2C_SMBUS_BYTE:
+ case I2C_SMBUS_BYTE_DATA:
+ data->byte = buf[0];
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ data->word = be16_to_cpup((__be16 *)buf);
+ break;
+ case I2C_SMBUS_BLOCK_DATA:
+ if (read_length > I2C_SMBUS_BLOCK_MAX) {
+ ret = -EPROTO;
+ goto power_normal;
+ }
+
+ memcpy(data->block, buf, read_length);
+ break;
+ }
+
+ ret = 0;
+power_normal:
+ hid_hw_power(hdev, PM_HINT_NORMAL);
+ hid_dbg(hdev, "transfer finished: %d\n", ret);
+ return ret;
+}
+
+static u32 cp2112_functionality(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_SMBUS_BYTE |
+ I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_WORD_DATA |
+ I2C_FUNC_SMBUS_BLOCK_DATA |
+ I2C_FUNC_SMBUS_I2C_BLOCK |
+ I2C_FUNC_SMBUS_PROC_CALL |
+ I2C_FUNC_SMBUS_BLOCK_PROC_CALL;
+}
+
+static const struct i2c_algorithm smbus_algorithm = {
+ .smbus_xfer = cp2112_xfer,
+ .functionality = cp2112_functionality,
+};
+
+static int cp2112_get_usb_config(struct hid_device *hdev,
+ struct cp2112_usb_config_report *cfg)
+{
+ int ret;
+
+ ret = cp2112_hid_get(hdev, CP2112_USB_CONFIG, (u8 *)cfg, sizeof(*cfg),
+ HID_FEATURE_REPORT);
+ if (ret != sizeof(*cfg)) {
+ hid_err(hdev, "error reading usb config: %d\n", ret);
+ if (ret < 0)
+ return ret;
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int cp2112_set_usb_config(struct hid_device *hdev,
+ struct cp2112_usb_config_report *cfg)
+{
+ int ret;
+
+ BUG_ON(cfg->report != CP2112_USB_CONFIG);
+
+ ret = cp2112_hid_output(hdev, (u8 *)cfg, sizeof(*cfg),
+ HID_FEATURE_REPORT);
+ if (ret != sizeof(*cfg)) {
+ hid_err(hdev, "error writing usb config: %d\n", ret);
+ if (ret < 0)
+ return ret;
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static void chmod_sysfs_attrs(struct hid_device *hdev);
+
+#define CP2112_CONFIG_ATTR(name, store, format, ...) \
+static ssize_t name##_store(struct device *kdev, \
+ struct device_attribute *attr, const char *buf, \
+ size_t count) \
+{ \
+ struct hid_device *hdev = container_of(kdev, struct hid_device, dev); \
+ struct cp2112_usb_config_report cfg; \
+ int ret = cp2112_get_usb_config(hdev, &cfg); \
+ if (ret) \
+ return ret; \
+ store; \
+ ret = cp2112_set_usb_config(hdev, &cfg); \
+ if (ret) \
+ return ret; \
+ chmod_sysfs_attrs(hdev); \
+ return count; \
+} \
+static ssize_t name##_show(struct device *kdev, \
+ struct device_attribute *attr, char *buf) \
+{ \
+ struct hid_device *hdev = container_of(kdev, struct hid_device, dev); \
+ struct cp2112_usb_config_report cfg; \
+ int ret = cp2112_get_usb_config(hdev, &cfg); \
+ if (ret) \
+ return ret; \
+ return scnprintf(buf, PAGE_SIZE, format, ##__VA_ARGS__); \
+} \
+static DEVICE_ATTR_RW(name);
+
+CP2112_CONFIG_ATTR(vendor_id, ({
+ u16 vid;
+
+ if (sscanf(buf, "%hi", &vid) != 1)
+ return -EINVAL;
+
+ cfg.vid = cpu_to_le16(vid);
+ cfg.mask = 0x01;
+}), "0x%04x\n", le16_to_cpu(cfg.vid));
+
+CP2112_CONFIG_ATTR(product_id, ({
+ u16 pid;
+
+ if (sscanf(buf, "%hi", &pid) != 1)
+ return -EINVAL;
+
+ cfg.pid = cpu_to_le16(pid);
+ cfg.mask = 0x02;
+}), "0x%04x\n", le16_to_cpu(cfg.pid));
+
+CP2112_CONFIG_ATTR(max_power, ({
+ int mA;
+
+ if (sscanf(buf, "%i", &mA) != 1)
+ return -EINVAL;
+
+ cfg.max_power = (mA + 1) / 2;
+ cfg.mask = 0x04;
+}), "%u mA\n", cfg.max_power * 2);
+
+CP2112_CONFIG_ATTR(power_mode, ({
+ if (sscanf(buf, "%hhi", &cfg.power_mode) != 1)
+ return -EINVAL;
+
+ cfg.mask = 0x08;
+}), "%u\n", cfg.power_mode);
+
+CP2112_CONFIG_ATTR(release_version, ({
+ if (sscanf(buf, "%hhi.%hhi", &cfg.release_major, &cfg.release_minor)
+ != 2)
+ return -EINVAL;
+
+ cfg.mask = 0x10;
+}), "%u.%u\n", cfg.release_major, cfg.release_minor);
+
+#undef CP2112_CONFIG_ATTR
+
+struct cp2112_pstring_attribute {
+ struct device_attribute attr;
+ unsigned char report;
+};
+
+static ssize_t pstr_store(struct device *kdev,
+ struct device_attribute *kattr, const char *buf,
+ size_t count)
+{
+ struct hid_device *hdev = container_of(kdev, struct hid_device, dev);
+ struct cp2112_pstring_attribute *attr =
+ container_of(kattr, struct cp2112_pstring_attribute, attr);
+ struct cp2112_string_report report;
+ int ret;
+
+ memset(&report, 0, sizeof(report));
+
+ ret = utf8s_to_utf16s(buf, count, UTF16_LITTLE_ENDIAN,
+ report.string, ARRAY_SIZE(report.string));
+ report.report = attr->report;
+ report.length = ret * sizeof(report.string[0]) + 2;
+ report.type = USB_DT_STRING;
+
+ ret = cp2112_hid_output(hdev, &report.report, report.length + 1,
+ HID_FEATURE_REPORT);
+ if (ret != report.length + 1) {
+ hid_err(hdev, "error writing %s string: %d\n", kattr->attr.name,
+ ret);
+ if (ret < 0)
+ return ret;
+ return -EIO;
+ }
+
+ chmod_sysfs_attrs(hdev);
+ return count;
+}
+
+static ssize_t pstr_show(struct device *kdev,
+ struct device_attribute *kattr, char *buf)
+{
+ struct hid_device *hdev = container_of(kdev, struct hid_device, dev);
+ struct cp2112_pstring_attribute *attr =
+ container_of(kattr, struct cp2112_pstring_attribute, attr);
+ struct cp2112_string_report report;
+ u8 length;
+ int ret;
+
+ ret = cp2112_hid_get(hdev, attr->report, &report.report,
+ sizeof(report) - 1, HID_FEATURE_REPORT);
+ if (ret < 3) {
+ hid_err(hdev, "error reading %s string: %d\n", kattr->attr.name,
+ ret);
+ if (ret < 0)
+ return ret;
+ return -EIO;
+ }
+
+ if (report.length < 2) {
+ hid_err(hdev, "invalid %s string length: %d\n",
+ kattr->attr.name, report.length);
+ return -EIO;
+ }
+
+ length = report.length > ret - 1 ? ret - 1 : report.length;
+ length = (length - 2) / sizeof(report.string[0]);
+ ret = utf16s_to_utf8s(report.string, length, UTF16_LITTLE_ENDIAN, buf,
+ PAGE_SIZE - 1);
+ buf[ret++] = '\n';
+ return ret;
+}
+
+#define CP2112_PSTR_ATTR(name, _report) \
+static struct cp2112_pstring_attribute dev_attr_##name = { \
+ .attr = __ATTR(name, (S_IWUSR | S_IRUGO), pstr_show, pstr_store), \
+ .report = _report, \
+};
+
+CP2112_PSTR_ATTR(manufacturer, CP2112_MANUFACTURER_STRING);
+CP2112_PSTR_ATTR(product, CP2112_PRODUCT_STRING);
+CP2112_PSTR_ATTR(serial, CP2112_SERIAL_STRING);
+
+#undef CP2112_PSTR_ATTR
+
+static const struct attribute_group cp2112_attr_group = {
+ .attrs = (struct attribute *[]){
+ &dev_attr_vendor_id.attr,
+ &dev_attr_product_id.attr,
+ &dev_attr_max_power.attr,
+ &dev_attr_power_mode.attr,
+ &dev_attr_release_version.attr,
+ &dev_attr_manufacturer.attr.attr,
+ &dev_attr_product.attr.attr,
+ &dev_attr_serial.attr.attr,
+ NULL
+ }
+};
+
+/* Chmoding our sysfs attributes is simply a way to expose which fields in the
+ * PROM have already been programmed. We do not depend on this preventing
+ * writing to these attributes since the CP2112 will simply ignore writes to
+ * already-programmed fields. This is why there is no sense in fixing this
+ * racy behaviour.
+ */
+static void chmod_sysfs_attrs(struct hid_device *hdev)
+{
+ struct attribute **attr;
+ u8 buf[2];
+ int ret;
+
+ ret = cp2112_hid_get(hdev, CP2112_LOCK_BYTE, buf, sizeof(buf),
+ HID_FEATURE_REPORT);
+ if (ret != sizeof(buf)) {
+ hid_err(hdev, "error reading lock byte: %d\n", ret);
+ return;
+ }
+
+ for (attr = cp2112_attr_group.attrs; *attr; ++attr) {
+ umode_t mode = (buf[1] & 1) ? S_IWUSR | S_IRUGO : S_IRUGO;
+ ret = sysfs_chmod_file(&hdev->dev.kobj, *attr, mode);
+ if (ret < 0)
+ hid_err(hdev, "error chmoding sysfs file %s\n",
+ (*attr)->name);
+ buf[1] >>= 1;
+ }
+}
+
+static int cp2112_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+ struct cp2112_device *dev;
+ u8 buf[3];
+ struct cp2112_smbus_config_report config;
+ int ret;
+
+ ret = hid_parse(hdev);
+ if (ret) {
+ hid_err(hdev, "parse failed\n");
+ return ret;
+ }
+
+ ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW);
+ if (ret) {
+ hid_err(hdev, "hw start failed\n");
+ return ret;
+ }
+
+ ret = hid_hw_open(hdev);
+ if (ret) {
+ hid_err(hdev, "hw open failed\n");
+ goto err_hid_stop;
+ }
+
+ ret = hid_hw_power(hdev, PM_HINT_FULLON);
+ if (ret < 0) {
+ hid_err(hdev, "power management error: %d\n", ret);
+ goto err_hid_close;
+ }
+
+ ret = cp2112_hid_get(hdev, CP2112_GET_VERSION_INFO, buf, sizeof(buf),
+ HID_FEATURE_REPORT);
+ if (ret != sizeof(buf)) {
+ hid_err(hdev, "error requesting version\n");
+ if (ret >= 0)
+ ret = -EIO;
+ goto err_power_normal;
+ }
+
+ hid_info(hdev, "Part Number: 0x%02X Device Version: 0x%02X\n",
+ buf[1], buf[2]);
+
+ ret = cp2112_hid_get(hdev, CP2112_SMBUS_CONFIG, (u8 *)&config,
+ sizeof(config), HID_FEATURE_REPORT);
+ if (ret != sizeof(config)) {
+ hid_err(hdev, "error requesting SMBus config\n");
+ if (ret >= 0)
+ ret = -EIO;
+ goto err_power_normal;
+ }
+
+ config.retry_time = cpu_to_be16(1);
+
+ ret = cp2112_hid_output(hdev, (u8 *)&config, sizeof(config),
+ HID_FEATURE_REPORT);
+ if (ret != sizeof(config)) {
+ hid_err(hdev, "error setting SMBus config\n");
+ if (ret >= 0)
+ ret = -EIO;
+ goto err_power_normal;
+ }
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (!dev) {
+ ret = -ENOMEM;
+ goto err_power_normal;
+ }
+
+ hid_set_drvdata(hdev, (void *)dev);
+ dev->hdev = hdev;
+ dev->adap.owner = THIS_MODULE;
+ dev->adap.class = I2C_CLASS_HWMON;
+ dev->adap.algo = &smbus_algorithm;
+ dev->adap.algo_data = dev;
+ dev->adap.dev.parent = &hdev->dev;
+ snprintf(dev->adap.name, sizeof(dev->adap.name),
+ "CP2112 SMBus Bridge on hiddev%d", hdev->minor);
+ init_waitqueue_head(&dev->wait);
+
+ hid_device_io_start(hdev);
+ ret = i2c_add_adapter(&dev->adap);
+ hid_device_io_stop(hdev);
+
+ if (ret) {
+ hid_err(hdev, "error registering i2c adapter\n");
+ goto err_free_dev;
+ }
+
+ hid_dbg(hdev, "adapter registered\n");
+
+ dev->gc.label = "cp2112_gpio";
+ dev->gc.direction_input = cp2112_gpio_direction_input;
+ dev->gc.direction_output = cp2112_gpio_direction_output;
+ dev->gc.set = cp2112_gpio_set;
+ dev->gc.get = cp2112_gpio_get;
+ dev->gc.base = -1;
+ dev->gc.ngpio = 8;
+ dev->gc.can_sleep = 1;
+ dev->gc.dev = &hdev->dev;
+
+ ret = gpiochip_add(&dev->gc);
+ if (ret < 0) {
+ hid_err(hdev, "error registering gpio chip\n");
+ goto err_free_i2c;
+ }
+
+ ret = sysfs_create_group(&hdev->dev.kobj, &cp2112_attr_group);
+ if (ret < 0) {
+ hid_err(hdev, "error creating sysfs attrs\n");
+ goto err_gpiochip_remove;
+ }
+
+ chmod_sysfs_attrs(hdev);
+ hid_hw_power(hdev, PM_HINT_NORMAL);
+
+ return ret;
+
+err_gpiochip_remove:
+ if (gpiochip_remove(&dev->gc) < 0)
+ hid_err(hdev, "error removing gpio chip\n");
+err_free_i2c:
+ i2c_del_adapter(&dev->adap);
+err_free_dev:
+ kfree(dev);
+err_power_normal:
+ hid_hw_power(hdev, PM_HINT_NORMAL);
+err_hid_close:
+ hid_hw_close(hdev);
+err_hid_stop:
+ hid_hw_stop(hdev);
+ return ret;
+}
+
+static void cp2112_remove(struct hid_device *hdev)
+{
+ struct cp2112_device *dev = hid_get_drvdata(hdev);
+
+ sysfs_remove_group(&hdev->dev.kobj, &cp2112_attr_group);
+ if (gpiochip_remove(&dev->gc))
+ hid_err(hdev, "unable to remove gpio chip\n");
+ i2c_del_adapter(&dev->adap);
+ /* i2c_del_adapter has finished removing all i2c devices from our
+ * adapter. Well behaved devices should no longer call our cp2112_xfer
+ * and should have waited for any pending calls to finish. It has also
+ * waited for device_unregister(&adap->dev) to complete. Therefore we
+ * can safely free our struct cp2112_device.
+ */
+ hid_hw_close(hdev);
+ hid_hw_stop(hdev);
+ kfree(dev);
+}
+
+static int cp2112_raw_event(struct hid_device *hdev, struct hid_report *report,
+ u8 *data, int size)
+{
+ struct cp2112_device *dev = hid_get_drvdata(hdev);
+ struct cp2112_xfer_status_report *xfer = (void *)data;
+
+ switch (data[0]) {
+ case CP2112_TRANSFER_STATUS_RESPONSE:
+ hid_dbg(hdev, "xfer status: %02x %02x %04x %04x\n",
+ xfer->status0, xfer->status1,
+ be16_to_cpu(xfer->retries), be16_to_cpu(xfer->length));
+
+ switch (xfer->status0) {
+ case STATUS0_IDLE:
+ dev->xfer_status = -EAGAIN;
+ break;
+ case STATUS0_BUSY:
+ dev->xfer_status = -EBUSY;
+ break;
+ case STATUS0_COMPLETE:
+ dev->xfer_status = be16_to_cpu(xfer->length);
+ break;
+ case STATUS0_ERROR:
+ switch (xfer->status1) {
+ case STATUS1_TIMEOUT_NACK:
+ case STATUS1_TIMEOUT_BUS:
+ dev->xfer_status = -ETIMEDOUT;
+ break;
+ default:
+ dev->xfer_status = -EIO;
+ break;
+ }
+ break;
+ default:
+ dev->xfer_status = -EINVAL;
+ break;
+ }
+
+ atomic_set(&dev->xfer_avail, 1);
+ break;
+ case CP2112_DATA_READ_RESPONSE:
+ hid_dbg(hdev, "read response: %02x %02x\n", data[1], data[2]);
+
+ dev->read_length = data[2];
+ if (dev->read_length > sizeof(dev->read_data))
+ dev->read_length = sizeof(dev->read_data);
+
+ memcpy(dev->read_data, &data[3], dev->read_length);
+ atomic_set(&dev->read_avail, 1);
+ break;
+ default:
+ hid_err(hdev, "unknown report\n");
+
+ return 0;
+ }
+
+ wake_up_interruptible(&dev->wait);
+ return 1;
+}
+
+static struct hid_driver cp2112_driver = {
+ .name = "cp2112",
+ .id_table = cp2112_devices,
+ .probe = cp2112_probe,
+ .remove = cp2112_remove,
+ .raw_event = cp2112_raw_event,
+};
+
+module_hid_driver(cp2112_driver);
+MODULE_DESCRIPTION("Silicon Labs HID USB to SMBus master bridge");
+MODULE_AUTHOR("David Barksdale <dbarksdale@uplogix.com>");
+MODULE_LICENSE("GPL");
+
u32 report_desc_size;
struct hv_input_dev_info hid_dev_info;
struct hid_device *hid_device;
+ u8 input_buf[HID_MAX_BUFFER_SIZE];
};
struct synthhid_msg *hid_msg;
struct mousevsc_dev *input_dev = hv_get_drvdata(device);
struct synthhid_input_report *input_report;
+ size_t len;
pipe_msg = (struct pipe_prt_msg *)((unsigned long)packet +
(packet->offset8 << 3));
(struct synthhid_input_report *)pipe_msg->data;
if (!input_dev->init_complete)
break;
- hid_input_report(input_dev->hid_device,
- HID_INPUT_REPORT, input_report->buffer,
- input_report->header.size, 1);
+
+ len = min(input_report->header.size,
+ (u32)sizeof(input_dev->input_buf));
+ memcpy(input_dev->input_buf, input_report->buffer, len);
+ hid_input_report(input_dev->hid_device, HID_INPUT_REPORT,
+ input_dev->input_buf, len, 1);
break;
default:
pr_err("unsupported hid msg type - type %d len %d",
{
}
+static int mousevsc_hid_raw_request(struct hid_device *hid,
+ unsigned char report_num,
+ __u8 *buf, size_t len,
+ unsigned char rtype,
+ int reqtype)
+{
+ return 0;
+}
+
static struct hid_ll_driver mousevsc_ll_driver = {
.parse = mousevsc_hid_parse,
.open = mousevsc_hid_open,
.close = mousevsc_hid_close,
.start = mousevsc_hid_start,
.stop = mousevsc_hid_stop,
+ .raw_request = mousevsc_hid_raw_request,
};
static struct hid_driver mousevsc_hid_driver;
#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS 0x023b
#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ANSI 0x0255
#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ISO 0x0256
+#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_JIS 0x0257
#define USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI 0x0290
#define USB_DEVICE_ID_APPLE_WELLSPRING8_ISO 0x0291
#define USB_DEVICE_ID_APPLE_WELLSPRING8_JIS 0x0292
#define USB_VENDOR_ID_CYGNAL 0x10c4
#define USB_DEVICE_ID_CYGNAL_RADIO_SI470X 0x818a
+#define USB_DEVICE_ID_FOCALTECH_FTXXXX_MULTITOUCH 0x81b9
+#define USB_DEVICE_ID_CYGNAL_CP2112 0xea90
#define USB_VENDOR_ID_CYPRESS 0x04b4
#define USB_DEVICE_ID_CYPRESS_MOUSE 0x0001
#define USB_VENDOR_ID_INTEL_1 0x8087
#define USB_DEVICE_ID_INTEL_HID_SENSOR 0x09fa
+#define USB_VENDOR_ID_STM_0 0x0483
+#define USB_DEVICE_ID_STM_HID_SENSOR 0x91d1
+
#define USB_VENDOR_ID_ION 0x15e4
#define USB_DEVICE_ID_ICADE 0x0132
#define USB_VENDOR_ID_MICROSOFT 0x045e
#define USB_DEVICE_ID_SIDEWINDER_GV 0x003b
+#define USB_DEVICE_ID_MS_OFFICE_KB 0x0048
#define USB_DEVICE_ID_WIRELESS_OPTICAL_DESKTOP_3_0 0x009d
#define USB_DEVICE_ID_MS_NE4K 0x00db
#define USB_DEVICE_ID_MS_NE4K_JP 0x00dc
#define USB_DEVICE_ID_MS_PRESENTER_8K_USB 0x0713
#define USB_DEVICE_ID_MS_DIGITAL_MEDIA_3K 0x0730
#define USB_DEVICE_ID_MS_COMFORT_MOUSE_4500 0x076c
+#define USB_DEVICE_ID_MS_TOUCH_COVER_2 0x07a7
+#define USB_DEVICE_ID_MS_TYPE_COVER_2 0x07a9
#define USB_VENDOR_ID_MOJO 0x8282
#define USB_DEVICE_ID_RETRO_ADAPTER 0x3201
#define USB_VENDOR_ID_NEXIO 0x1870
#define USB_DEVICE_ID_NEXIO_MULTITOUCH_420 0x010d
+#define USB_DEVICE_ID_NEXIO_MULTITOUCH_PTI0750 0x0110
#define USB_VENDOR_ID_NEXTWINDOW 0x1926
#define USB_DEVICE_ID_NEXTWINDOW_TOUCHSCREEN 0x0003
case 0x199: map_key_clear(KEY_CHAT); break;
case 0x19c: map_key_clear(KEY_LOGOFF); break;
case 0x19e: map_key_clear(KEY_COFFEE); break;
+ case 0x1a3: map_key_clear(KEY_NEXT); break;
+ case 0x1a4: map_key_clear(KEY_PREVIOUS); break;
case 0x1a6: map_key_clear(KEY_HELP); break;
case 0x1a7: map_key_clear(KEY_DOCUMENTS); break;
case 0x1ab: map_key_clear(KEY_SPELLCHECK); break;
case 0x1ae: map_key_clear(KEY_KEYBOARD); break;
+ case 0x1b4: map_key_clear(KEY_FILE); break;
case 0x1b6: map_key_clear(KEY_IMAGES); break;
case 0x1b7: map_key_clear(KEY_AUDIO); break;
case 0x1b8: map_key_clear(KEY_VIDEO); break;
/* fall back to generic raw-output-report */
len = ((report->size - 1) >> 3) + 1 + (report->id > 0);
- buf = kmalloc(len, GFP_KERNEL);
+ buf = hid_alloc_report_buf(report, GFP_KERNEL);
if (!buf)
return;
#define G25_REV_MIN 0x22
#define G27_REV_MAJ 0x12
#define G27_REV_MIN 0x38
+#define G27_2_REV_MIN 0x39
#define to_hid_device(pdev) container_of(pdev, struct hid_device, dev)
{DFP_REV_MAJ, DFP_REV_MIN, &native_dfp}, /* Driving Force Pro */
{G25_REV_MAJ, G25_REV_MIN, &native_g25}, /* G25 */
{G27_REV_MAJ, G27_REV_MIN, &native_g27}, /* G27 */
+ {G27_REV_MAJ, G27_2_REV_MIN, &native_g27}, /* G27 v2 */
};
/* Recalculates X axis value accordingly to currently selected range */
{
struct input_dev *input = hi->input;
+ if ((usage->hid & HID_USAGE_PAGE) == HID_UP_CONSUMER) {
+ switch (usage->hid & HID_USAGE) {
+ /*
+ * Microsoft uses these 2 reserved usage ids for 2 keys on
+ * the MS office kb labelled "Office Home" and "Task Pane".
+ */
+ case 0x29d:
+ ms_map_key_clear(KEY_PROG1);
+ return 1;
+ case 0x29e:
+ ms_map_key_clear(KEY_PROG2);
+ return 1;
+ }
+ return 0;
+ }
+
+ if ((usage->hid & HID_USAGE_PAGE) != HID_UP_MSVENDOR)
+ return 0;
+
switch (usage->hid & HID_USAGE) {
case 0xfd06: ms_map_key_clear(KEY_CHAT); break;
case 0xfd07: ms_map_key_clear(KEY_PHONE); break;
+ case 0xff00:
+ /* Special keypad keys */
+ ms_map_key_clear(KEY_KPEQUAL);
+ set_bit(KEY_KPLEFTPAREN, input->keybit);
+ set_bit(KEY_KPRIGHTPAREN, input->keybit);
+ break;
+ case 0xff01:
+ /* Scroll wheel */
+ hid_map_usage_clear(hi, usage, bit, max, EV_REL, REL_WHEEL);
+ break;
+ case 0xff02:
+ /*
+ * This byte contains a copy of the modifier keys byte of a
+ * standard hid keyboard report, as send by interface 0
+ * (this usage is found on interface 1).
+ *
+ * This byte only gets send when another key in the same report
+ * changes state, and as such is useless, ignore it.
+ */
+ return -1;
case 0xff05:
set_bit(EV_REP, input->evbit);
ms_map_key_clear(KEY_F13);
static int ms_presenter_8k_quirk(struct hid_input *hi, struct hid_usage *usage,
unsigned long **bit, int *max)
{
+ if ((usage->hid & HID_USAGE_PAGE) != HID_UP_MSVENDOR)
+ return 0;
+
set_bit(EV_REP, hi->input->evbit);
switch (usage->hid & HID_USAGE) {
case 0xfd08: ms_map_key_clear(KEY_FORWARD); break;
{
unsigned long quirks = (unsigned long)hid_get_drvdata(hdev);
- if ((usage->hid & HID_USAGE_PAGE) != HID_UP_MSVENDOR)
- return 0;
-
if (quirks & MS_ERGONOMY) {
int ret = ms_ergonomy_kb_quirk(hi, usage, bit, max);
if (ret)
struct hid_usage *usage, __s32 value)
{
unsigned long quirks = (unsigned long)hid_get_drvdata(hdev);
+ struct input_dev *input;
if (!(hdev->claimed & HID_CLAIMED_INPUT) || !field->hidinput ||
!usage->type)
return 0;
+ input = field->hidinput->input;
+
/* Handling MS keyboards special buttons */
+ if (quirks & MS_ERGONOMY && usage->hid == (HID_UP_MSVENDOR | 0xff00)) {
+ /* Special keypad keys */
+ input_report_key(input, KEY_KPEQUAL, value & 0x01);
+ input_report_key(input, KEY_KPLEFTPAREN, value & 0x02);
+ input_report_key(input, KEY_KPRIGHTPAREN, value & 0x04);
+ return 1;
+ }
+
+ if (quirks & MS_ERGONOMY && usage->hid == (HID_UP_MSVENDOR | 0xff01)) {
+ /* Scroll wheel */
+ int step = ((value & 0x60) >> 5) + 1;
+
+ switch (value & 0x1f) {
+ case 0x01:
+ input_report_rel(input, REL_WHEEL, step);
+ break;
+ case 0x1f:
+ input_report_rel(input, REL_WHEEL, -step);
+ break;
+ }
+ return 1;
+ }
+
if (quirks & MS_ERGONOMY && usage->hid == (HID_UP_MSVENDOR | 0xff05)) {
- struct input_dev *input = field->hidinput->input;
static unsigned int last_key = 0;
unsigned int key = 0;
switch (value) {
static const struct hid_device_id ms_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_GV),
.driver_data = MS_HIDINPUT },
+ { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_OFFICE_KB),
+ .driver_data = MS_ERGONOMY },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE4K),
.driver_data = MS_ERGONOMY },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE4K_JP),
.driver_data = MS_NOGET },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_COMFORT_MOUSE_4500),
.driver_data = MS_DUPLICATE_USAGES },
+ { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_2),
+ .driver_data = 0 },
+ { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TOUCH_COVER_2),
+ .driver_data = 0 },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_BT),
.driver_data = MS_PRESENTER },
MT_USB_DEVICE(USB_VENDOR_ID_FLATFROG,
USB_DEVICE_ID_MULTITOUCH_3200) },
+ /* FocalTech Panels */
+ { .driver_data = MT_CLS_SERIAL,
+ MT_USB_DEVICE(USB_VENDOR_ID_CYGNAL,
+ USB_DEVICE_ID_FOCALTECH_FTXXXX_MULTITOUCH) },
+
/* GeneralTouch panel */
{ .driver_data = MT_CLS_GENERALTOUCH_TWOFINGERS,
MT_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH,
* @dyn_callback_lock: spin lock to protect callback list
* @hid_sensor_hub_client_devs: Stores all MFD cells for a hub instance.
* @hid_sensor_client_cnt: Number of MFD cells, (no of sensors attached).
+ * @ref_cnt: Number of MFD clients have opened this device
*/
struct sensor_hub_data {
- struct hid_sensor_hub_device *hsdev;
struct mutex mutex;
spinlock_t lock;
struct sensor_hub_pending pending;
struct mfd_cell *hid_sensor_hub_client_devs;
int hid_sensor_client_cnt;
unsigned long quirks;
+ int ref_cnt;
};
/**
struct hid_sensor_hub_callbacks_list {
struct list_head list;
u32 usage_id;
+ struct hid_sensor_hub_device *hsdev;
struct hid_sensor_hub_callbacks *usage_callback;
void *priv;
};
return NULL;
}
-static int sensor_hub_get_physical_device_count(
- struct hid_report_enum *report_enum)
+static int sensor_hub_get_physical_device_count(struct hid_device *hdev)
{
- struct hid_report *report;
- struct hid_field *field;
- int cnt = 0;
+ int i;
+ int count = 0;
- list_for_each_entry(report, &report_enum->report_list, list) {
- field = report->field[0];
- if (report->maxfield && field && field->physical)
- cnt++;
+ for (i = 0; i < hdev->maxcollection; ++i) {
+ struct hid_collection *collection = &hdev->collection[i];
+ if (collection->type == HID_COLLECTION_PHYSICAL)
+ ++count;
}
- return cnt;
+ return count;
}
static void sensor_hub_fill_attr_info(
static struct hid_sensor_hub_callbacks *sensor_hub_get_callback(
struct hid_device *hdev,
- u32 usage_id, void **priv)
+ u32 usage_id,
+ int collection_index,
+ struct hid_sensor_hub_device **hsdev,
+ void **priv)
{
struct hid_sensor_hub_callbacks_list *callback;
struct sensor_hub_data *pdata = hid_get_drvdata(hdev);
spin_lock(&pdata->dyn_callback_lock);
list_for_each_entry(callback, &pdata->dyn_callback_list, list)
- if (callback->usage_id == usage_id) {
+ if (callback->usage_id == usage_id &&
+ (collection_index >=
+ callback->hsdev->start_collection_index) &&
+ (collection_index <
+ callback->hsdev->end_collection_index)) {
*priv = callback->priv;
+ *hsdev = callback->hsdev;
spin_unlock(&pdata->dyn_callback_lock);
return callback->usage_callback;
}
spin_lock(&pdata->dyn_callback_lock);
list_for_each_entry(callback, &pdata->dyn_callback_list, list)
- if (callback->usage_id == usage_id) {
+ if (callback->usage_id == usage_id &&
+ callback->hsdev == hsdev) {
spin_unlock(&pdata->dyn_callback_lock);
return -EINVAL;
}
spin_unlock(&pdata->dyn_callback_lock);
return -ENOMEM;
}
+ callback->hsdev = hsdev;
callback->usage_callback = usage_callback;
callback->usage_id = usage_id;
callback->priv = NULL;
spin_lock(&pdata->dyn_callback_lock);
list_for_each_entry(callback, &pdata->dyn_callback_list, list)
- if (callback->usage_id == usage_id) {
+ if (callback->usage_id == usage_id &&
+ callback->hsdev == hsdev) {
list_del(&callback->list);
kfree(callback);
break;
spin_lock_irqsave(&data->lock, flags);
data->pending.status = true;
+ spin_unlock_irqrestore(&data->lock, flags);
report = sensor_hub_report(report_id, hsdev->hdev, HID_INPUT_REPORT);
- if (!report) {
- spin_unlock_irqrestore(&data->lock, flags);
+ if (!report)
goto err_free;
- }
+
hid_hw_request(hsdev->hdev, report, HID_REQ_GET_REPORT);
- spin_unlock_irqrestore(&data->lock, flags);
wait_for_completion_interruptible_timeout(&data->pending.ready, HZ*5);
switch (data->pending.raw_size) {
case 1:
}
EXPORT_SYMBOL_GPL(sensor_hub_input_attr_get_raw_value);
+int hid_sensor_get_usage_index(struct hid_sensor_hub_device *hsdev,
+ u32 report_id, int field_index, u32 usage_id)
+{
+ struct hid_report *report;
+ struct hid_field *field;
+ int i;
+
+ report = sensor_hub_report(report_id, hsdev->hdev, HID_FEATURE_REPORT);
+ if (!report || (field_index >= report->maxfield))
+ goto done_proc;
+
+ field = report->field[field_index];
+ for (i = 0; i < field->maxusage; ++i) {
+ if (field->usage[i].hid == usage_id)
+ return field->usage[i].usage_index;
+ }
+
+done_proc:
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(hid_sensor_get_usage_index);
+
int sensor_hub_input_get_attribute_info(struct hid_sensor_hub_device *hsdev,
u8 type,
u32 usage_id,
struct hid_sensor_hub_attribute_info *info)
{
int ret = -1;
- int i, j;
- int collection_index = -1;
+ int i;
struct hid_report *report;
struct hid_field *field;
struct hid_report_enum *report_enum;
info->units = -1;
info->unit_expo = -1;
- for (i = 0; i < hdev->maxcollection; ++i) {
- struct hid_collection *collection = &hdev->collection[i];
- if (usage_id == collection->usage) {
- collection_index = i;
- break;
- }
- }
- if (collection_index == -1)
- goto err_ret;
-
report_enum = &hdev->report_enum[type];
list_for_each_entry(report, &report_enum->report_list, list) {
for (i = 0; i < report->maxfield; ++i) {
field = report->field[i];
- if (field->physical == usage_id &&
- field->logical == attr_usage_id) {
- sensor_hub_fill_attr_info(info, i, report->id,
- field);
- ret = 0;
- } else {
- for (j = 0; j < field->maxusage; ++j) {
- if (field->usage[j].hid ==
- attr_usage_id &&
- field->usage[j].collection_index ==
- collection_index) {
- sensor_hub_fill_attr_info(info,
- i, report->id, field);
- ret = 0;
- break;
- }
+ if (field->maxusage) {
+ if (field->physical == usage_id &&
+ (field->logical == attr_usage_id ||
+ field->usage[0].hid ==
+ attr_usage_id) &&
+ (field->usage[0].collection_index >=
+ hsdev->start_collection_index) &&
+ (field->usage[0].collection_index <
+ hsdev->end_collection_index)) {
+
+ sensor_hub_fill_attr_info(info, i,
+ report->id,
+ field);
+ ret = 0;
+ break;
}
}
- if (ret == 0)
- break;
}
+
}
-err_ret:
return ret;
}
EXPORT_SYMBOL_GPL(sensor_hub_input_get_attribute_info);
list_for_each_entry(callback, &pdata->dyn_callback_list, list) {
if (callback->usage_callback->suspend)
callback->usage_callback->suspend(
- pdata->hsdev, callback->priv);
+ callback->hsdev, callback->priv);
}
spin_unlock(&pdata->dyn_callback_lock);
list_for_each_entry(callback, &pdata->dyn_callback_list, list) {
if (callback->usage_callback->resume)
callback->usage_callback->resume(
- pdata->hsdev, callback->priv);
+ callback->hsdev, callback->priv);
}
spin_unlock(&pdata->dyn_callback_lock);
struct hid_sensor_hub_callbacks *callback = NULL;
struct hid_collection *collection = NULL;
void *priv = NULL;
+ struct hid_sensor_hub_device *hsdev = NULL;
hid_dbg(hdev, "sensor_hub_raw_event report id:0x%x size:%d type:%d\n",
report->id, size, report->type);
report->field[i]->usage->collection_index];
hid_dbg(hdev, "collection->usage %x\n",
collection->usage);
- callback = sensor_hub_get_callback(pdata->hsdev->hdev,
- report->field[i]->physical,
- &priv);
+
+ callback = sensor_hub_get_callback(hdev,
+ report->field[i]->physical,
+ report->field[i]->usage[0].collection_index,
+ &hsdev, &priv);
+
if (callback && callback->capture_sample) {
if (report->field[i]->logical)
- callback->capture_sample(pdata->hsdev,
+ callback->capture_sample(hsdev,
report->field[i]->logical, sz, ptr,
callback->pdev);
else
- callback->capture_sample(pdata->hsdev,
+ callback->capture_sample(hsdev,
report->field[i]->usage->hid, sz, ptr,
callback->pdev);
}
ptr += sz;
}
if (callback && collection && callback->send_event)
- callback->send_event(pdata->hsdev, collection->usage,
+ callback->send_event(hsdev, collection->usage,
callback->pdev);
spin_unlock_irqrestore(&pdata->lock, flags);
struct sensor_hub_data *data = hid_get_drvdata(hsdev->hdev);
mutex_lock(&data->mutex);
- if (!hsdev->ref_cnt) {
+ if (!data->ref_cnt) {
ret = hid_hw_open(hsdev->hdev);
if (ret) {
hid_err(hsdev->hdev, "failed to open hid device\n");
return ret;
}
}
- hsdev->ref_cnt++;
+ data->ref_cnt++;
mutex_unlock(&data->mutex);
return ret;
struct sensor_hub_data *data = hid_get_drvdata(hsdev->hdev);
mutex_lock(&data->mutex);
- hsdev->ref_cnt--;
- if (!hsdev->ref_cnt)
+ data->ref_cnt--;
+ if (!data->ref_cnt)
hid_hw_close(hsdev->hdev);
mutex_unlock(&data->mutex);
}
struct sensor_hub_data *sd;
int i;
char *name;
- struct hid_report *report;
- struct hid_report_enum *report_enum;
- struct hid_field *field;
int dev_cnt;
+ struct hid_sensor_hub_device *hsdev;
+ struct hid_sensor_hub_device *last_hsdev = NULL;
sd = devm_kzalloc(&hdev->dev, sizeof(*sd), GFP_KERNEL);
if (!sd) {
hid_err(hdev, "cannot allocate Sensor data\n");
return -ENOMEM;
}
- sd->hsdev = devm_kzalloc(&hdev->dev, sizeof(*sd->hsdev), GFP_KERNEL);
- if (!sd->hsdev) {
- hid_err(hdev, "cannot allocate hid_sensor_hub_device\n");
- return -ENOMEM;
- }
+
hid_set_drvdata(hdev, sd);
sd->quirks = id->driver_data;
- sd->hsdev->hdev = hdev;
- sd->hsdev->vendor_id = hdev->vendor;
- sd->hsdev->product_id = hdev->product;
+
spin_lock_init(&sd->lock);
spin_lock_init(&sd->dyn_callback_lock);
mutex_init(&sd->mutex);
}
INIT_LIST_HEAD(&sd->dyn_callback_list);
sd->hid_sensor_client_cnt = 0;
- report_enum = &hdev->report_enum[HID_INPUT_REPORT];
- dev_cnt = sensor_hub_get_physical_device_count(report_enum);
+ dev_cnt = sensor_hub_get_physical_device_count(hdev);
if (dev_cnt > HID_MAX_PHY_DEVICES) {
hid_err(hdev, "Invalid Physical device count\n");
ret = -EINVAL;
ret = -ENOMEM;
goto err_stop_hw;
}
- list_for_each_entry(report, &report_enum->report_list, list) {
- hid_dbg(hdev, "Report id:%x\n", report->id);
- field = report->field[0];
- if (report->maxfield && field &&
- field->physical) {
+
+ for (i = 0; i < hdev->maxcollection; ++i) {
+ struct hid_collection *collection = &hdev->collection[i];
+
+ if (collection->type == HID_COLLECTION_PHYSICAL) {
+
+ hsdev = kzalloc(sizeof(*hsdev), GFP_KERNEL);
+ if (!hsdev) {
+ hid_err(hdev, "cannot allocate hid_sensor_hub_device\n");
+ ret = -ENOMEM;
+ goto err_no_mem;
+ }
+ hsdev->hdev = hdev;
+ hsdev->vendor_id = hdev->vendor;
+ hsdev->product_id = hdev->product;
+ hsdev->start_collection_index = i;
+ if (last_hsdev)
+ last_hsdev->end_collection_index = i;
+ last_hsdev = hsdev;
name = kasprintf(GFP_KERNEL, "HID-SENSOR-%x",
- field->physical);
+ collection->usage);
if (name == NULL) {
hid_err(hdev, "Failed MFD device name\n");
ret = -ENOMEM;
- goto err_free_names;
+ goto err_no_mem;
}
sd->hid_sensor_hub_client_devs[
- sd->hid_sensor_client_cnt].id = PLATFORM_DEVID_AUTO;
+ sd->hid_sensor_client_cnt].id =
+ PLATFORM_DEVID_AUTO;
sd->hid_sensor_hub_client_devs[
sd->hid_sensor_client_cnt].name = name;
sd->hid_sensor_hub_client_devs[
sd->hid_sensor_client_cnt].platform_data =
- sd->hsdev;
+ hsdev;
sd->hid_sensor_hub_client_devs[
sd->hid_sensor_client_cnt].pdata_size =
- sizeof(*sd->hsdev);
- hid_dbg(hdev, "Adding %s:%p\n", name, sd);
+ sizeof(*hsdev);
+ hid_dbg(hdev, "Adding %s:%d\n", name,
+ hsdev->start_collection_index);
sd->hid_sensor_client_cnt++;
}
}
+ if (last_hsdev)
+ last_hsdev->end_collection_index = i;
+
ret = mfd_add_devices(&hdev->dev, 0, sd->hid_sensor_hub_client_devs,
sd->hid_sensor_client_cnt, NULL, 0, NULL);
if (ret < 0)
- goto err_free_names;
+ goto err_no_mem;
return ret;
-err_free_names:
- for (i = 0; i < sd->hid_sensor_client_cnt ; ++i)
+err_no_mem:
+ for (i = 0; i < sd->hid_sensor_client_cnt; ++i) {
kfree(sd->hid_sensor_hub_client_devs[i].name);
+ kfree(sd->hid_sensor_hub_client_devs[i].platform_data);
+ }
kfree(sd->hid_sensor_hub_client_devs);
err_stop_hw:
hid_hw_stop(hdev);
complete(&data->pending.ready);
spin_unlock_irqrestore(&data->lock, flags);
mfd_remove_devices(&hdev->dev);
- for (i = 0; i < data->hid_sensor_client_cnt ; ++i)
+ for (i = 0; i < data->hid_sensor_client_cnt; ++i) {
kfree(data->hid_sensor_hub_client_devs[i].name);
+ kfree(data->hid_sensor_hub_client_devs[i].platform_data);
+ }
kfree(data->hid_sensor_hub_client_devs);
hid_set_drvdata(hdev, NULL);
mutex_destroy(&data->mutex);
{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_SENSOR_HUB, USB_VENDOR_ID_INTEL_1,
USB_DEVICE_ID_INTEL_HID_SENSOR),
.driver_data = HID_SENSOR_HUB_ENUM_QUIRK},
+ { HID_DEVICE(HID_BUS_ANY, HID_GROUP_SENSOR_HUB, USB_VENDOR_ID_STM_0,
+ USB_DEVICE_ID_STM_HID_SENSOR),
+ .driver_data = HID_SENSOR_HUB_ENUM_QUIRK},
{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_SENSOR_HUB, HID_ANY_ID,
HID_ANY_ID) },
{ }
* any later version.
*/
-/* NOTE: in order for the Sony PS3 BD Remote Control to be found by
+/*
+ * NOTE: in order for the Sony PS3 BD Remote Control to be found by
* a Bluetooth host, the key combination Start+Enter has to be kept pressed
* for about 7 seconds with the Bluetooth Host Controller in discovering mode.
*
#include <linux/hid.h>
#include <linux/module.h>
#include <linux/slab.h>
-#include <linux/usb.h>
#include <linux/leds.h>
+#include <linux/power_supply.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/input/mt.h>
#include "hid-ids.h"
#define DUALSHOCK4_CONTROLLER_USB BIT(5)
#define DUALSHOCK4_CONTROLLER_BT BIT(6)
-#define SONY_LED_SUPPORT (SIXAXIS_CONTROLLER_USB | BUZZ_CONTROLLER | DUALSHOCK4_CONTROLLER_USB)
+#define SIXAXIS_CONTROLLER (SIXAXIS_CONTROLLER_USB | SIXAXIS_CONTROLLER_BT)
+#define DUALSHOCK4_CONTROLLER (DUALSHOCK4_CONTROLLER_USB |\
+ DUALSHOCK4_CONTROLLER_BT)
+#define SONY_LED_SUPPORT (SIXAXIS_CONTROLLER | BUZZ_CONTROLLER |\
+ DUALSHOCK4_CONTROLLER)
+#define SONY_BATTERY_SUPPORT (SIXAXIS_CONTROLLER | DUALSHOCK4_CONTROLLER)
+#define SONY_FF_SUPPORT (SIXAXIS_CONTROLLER | DUALSHOCK4_CONTROLLER)
#define MAX_LEDS 4
0xb1, 0x02, 0xc0, 0xc0,
};
-/* The default descriptor doesn't provide mapping for the accelerometers
+/*
+ * The default descriptor doesn't provide mapping for the accelerometers
* or orientation sensors. This fixed descriptor maps the accelerometers
* to usage values 0x40, 0x41 and 0x42 and maps the orientation sensors
* to usage values 0x43, 0x44 and 0x45.
0xC0 /* End Collection */
};
+/*
+ * The default behavior of the Dualshock 4 is to send reports using report
+ * type 1 when running over Bluetooth. However, as soon as it receives a
+ * report of type 17 to set the LEDs or rumble it starts returning it's state
+ * in report 17 instead of 1. Since report 17 is undefined in the default HID
+ * descriptor the button and axis definitions must be moved to report 17 or
+ * the HID layer won't process the received input once a report is sent.
+ */
+static u8 dualshock4_bt_rdesc[] = {
+ 0x05, 0x01, /* Usage Page (Desktop), */
+ 0x09, 0x05, /* Usage (Gamepad), */
+ 0xA1, 0x01, /* Collection (Application), */
+ 0x85, 0x01, /* Report ID (1), */
+ 0x75, 0x08, /* Report Size (8), */
+ 0x95, 0x0A, /* Report Count (9), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x06, 0x04, 0xFF, /* Usage Page (FF04h), */
+ 0x85, 0x02, /* Report ID (2), */
+ 0x09, 0x24, /* Usage (24h), */
+ 0x95, 0x24, /* Report Count (36), */
+ 0xB1, 0x02, /* Feature (Variable), */
+ 0x85, 0xA3, /* Report ID (163), */
+ 0x09, 0x25, /* Usage (25h), */
+ 0x95, 0x30, /* Report Count (48), */
+ 0xB1, 0x02, /* Feature (Variable), */
+ 0x85, 0x05, /* Report ID (5), */
+ 0x09, 0x26, /* Usage (26h), */
+ 0x95, 0x28, /* Report Count (40), */
+ 0xB1, 0x02, /* Feature (Variable), */
+ 0x85, 0x06, /* Report ID (6), */
+ 0x09, 0x27, /* Usage (27h), */
+ 0x95, 0x34, /* Report Count (52), */
+ 0xB1, 0x02, /* Feature (Variable), */
+ 0x85, 0x07, /* Report ID (7), */
+ 0x09, 0x28, /* Usage (28h), */
+ 0x95, 0x30, /* Report Count (48), */
+ 0xB1, 0x02, /* Feature (Variable), */
+ 0x85, 0x08, /* Report ID (8), */
+ 0x09, 0x29, /* Usage (29h), */
+ 0x95, 0x2F, /* Report Count (47), */
+ 0xB1, 0x02, /* Feature (Variable), */
+ 0x06, 0x03, 0xFF, /* Usage Page (FF03h), */
+ 0x85, 0x03, /* Report ID (3), */
+ 0x09, 0x21, /* Usage (21h), */
+ 0x95, 0x26, /* Report Count (38), */
+ 0xB1, 0x02, /* Feature (Variable), */
+ 0x85, 0x04, /* Report ID (4), */
+ 0x09, 0x22, /* Usage (22h), */
+ 0x95, 0x2E, /* Report Count (46), */
+ 0xB1, 0x02, /* Feature (Variable), */
+ 0x85, 0xF0, /* Report ID (240), */
+ 0x09, 0x47, /* Usage (47h), */
+ 0x95, 0x3F, /* Report Count (63), */
+ 0xB1, 0x02, /* Feature (Variable), */
+ 0x85, 0xF1, /* Report ID (241), */
+ 0x09, 0x48, /* Usage (48h), */
+ 0x95, 0x3F, /* Report Count (63), */
+ 0xB1, 0x02, /* Feature (Variable), */
+ 0x85, 0xF2, /* Report ID (242), */
+ 0x09, 0x49, /* Usage (49h), */
+ 0x95, 0x0F, /* Report Count (15), */
+ 0xB1, 0x02, /* Feature (Variable), */
+ 0x85, 0x11, /* Report ID (17), */
+ 0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
+ 0x09, 0x20, /* Usage (20h), */
+ 0x95, 0x02, /* Report Count (2), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x05, 0x01, /* Usage Page (Desktop), */
+ 0x09, 0x30, /* Usage (X), */
+ 0x09, 0x31, /* Usage (Y), */
+ 0x09, 0x32, /* Usage (Z), */
+ 0x09, 0x35, /* Usage (Rz), */
+ 0x15, 0x00, /* Logical Minimum (0), */
+ 0x26, 0xFF, 0x00, /* Logical Maximum (255), */
+ 0x75, 0x08, /* Report Size (8), */
+ 0x95, 0x04, /* Report Count (4), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x09, 0x39, /* Usage (Hat Switch), */
+ 0x15, 0x00, /* Logical Minimum (0), */
+ 0x25, 0x07, /* Logical Maximum (7), */
+ 0x75, 0x04, /* Report Size (4), */
+ 0x95, 0x01, /* Report Count (1), */
+ 0x81, 0x42, /* Input (Variable, Null State), */
+ 0x05, 0x09, /* Usage Page (Button), */
+ 0x19, 0x01, /* Usage Minimum (01h), */
+ 0x29, 0x0E, /* Usage Maximum (0Eh), */
+ 0x15, 0x00, /* Logical Minimum (0), */
+ 0x25, 0x01, /* Logical Maximum (1), */
+ 0x75, 0x01, /* Report Size (1), */
+ 0x95, 0x0E, /* Report Count (14), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x75, 0x06, /* Report Size (6), */
+ 0x95, 0x01, /* Report Count (1), */
+ 0x81, 0x01, /* Input (Constant), */
+ 0x05, 0x01, /* Usage Page (Desktop), */
+ 0x09, 0x33, /* Usage (Rx), */
+ 0x09, 0x34, /* Usage (Ry), */
+ 0x15, 0x00, /* Logical Minimum (0), */
+ 0x26, 0xFF, 0x00, /* Logical Maximum (255), */
+ 0x75, 0x08, /* Report Size (8), */
+ 0x95, 0x02, /* Report Count (2), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
+ 0x09, 0x20, /* Usage (20h), */
+ 0x95, 0x03, /* Report Count (3), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x05, 0x01, /* Usage Page (Desktop), */
+ 0x19, 0x40, /* Usage Minimum (40h), */
+ 0x29, 0x42, /* Usage Maximum (42h), */
+ 0x16, 0x00, 0x80, /* Logical Minimum (-32768), */
+ 0x26, 0x00, 0x7F, /* Logical Maximum (32767), */
+ 0x75, 0x10, /* Report Size (16), */
+ 0x95, 0x03, /* Report Count (3), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x19, 0x43, /* Usage Minimum (43h), */
+ 0x29, 0x45, /* Usage Maximum (45h), */
+ 0x16, 0xFF, 0xBF, /* Logical Minimum (-16385), */
+ 0x26, 0x00, 0x40, /* Logical Maximum (16384), */
+ 0x95, 0x03, /* Report Count (3), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
+ 0x09, 0x20, /* Usage (20h), */
+ 0x15, 0x00, /* Logical Minimum (0), */
+ 0x26, 0xFF, 0x00, /* Logical Maximum (255), */
+ 0x75, 0x08, /* Report Size (8), */
+ 0x95, 0x31, /* Report Count (51), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x09, 0x21, /* Usage (21h), */
+ 0x75, 0x08, /* Report Size (8), */
+ 0x95, 0x4D, /* Report Count (77), */
+ 0x91, 0x02, /* Output (Variable), */
+ 0x85, 0x12, /* Report ID (18), */
+ 0x09, 0x22, /* Usage (22h), */
+ 0x95, 0x8D, /* Report Count (141), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x09, 0x23, /* Usage (23h), */
+ 0x91, 0x02, /* Output (Variable), */
+ 0x85, 0x13, /* Report ID (19), */
+ 0x09, 0x24, /* Usage (24h), */
+ 0x95, 0xCD, /* Report Count (205), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x09, 0x25, /* Usage (25h), */
+ 0x91, 0x02, /* Output (Variable), */
+ 0x85, 0x14, /* Report ID (20), */
+ 0x09, 0x26, /* Usage (26h), */
+ 0x96, 0x0D, 0x01, /* Report Count (269), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x09, 0x27, /* Usage (27h), */
+ 0x91, 0x02, /* Output (Variable), */
+ 0x85, 0x15, /* Report ID (21), */
+ 0x09, 0x28, /* Usage (28h), */
+ 0x96, 0x4D, 0x01, /* Report Count (333), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x09, 0x29, /* Usage (29h), */
+ 0x91, 0x02, /* Output (Variable), */
+ 0x85, 0x16, /* Report ID (22), */
+ 0x09, 0x2A, /* Usage (2Ah), */
+ 0x96, 0x8D, 0x01, /* Report Count (397), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x09, 0x2B, /* Usage (2Bh), */
+ 0x91, 0x02, /* Output (Variable), */
+ 0x85, 0x17, /* Report ID (23), */
+ 0x09, 0x2C, /* Usage (2Ch), */
+ 0x96, 0xCD, 0x01, /* Report Count (461), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x09, 0x2D, /* Usage (2Dh), */
+ 0x91, 0x02, /* Output (Variable), */
+ 0x85, 0x18, /* Report ID (24), */
+ 0x09, 0x2E, /* Usage (2Eh), */
+ 0x96, 0x0D, 0x02, /* Report Count (525), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x09, 0x2F, /* Usage (2Fh), */
+ 0x91, 0x02, /* Output (Variable), */
+ 0x85, 0x19, /* Report ID (25), */
+ 0x09, 0x30, /* Usage (30h), */
+ 0x96, 0x22, 0x02, /* Report Count (546), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x09, 0x31, /* Usage (31h), */
+ 0x91, 0x02, /* Output (Variable), */
+ 0x06, 0x80, 0xFF, /* Usage Page (FF80h), */
+ 0x85, 0x82, /* Report ID (130), */
+ 0x09, 0x22, /* Usage (22h), */
+ 0x95, 0x3F, /* Report Count (63), */
+ 0xB1, 0x02, /* Feature (Variable), */
+ 0x85, 0x83, /* Report ID (131), */
+ 0x09, 0x23, /* Usage (23h), */
+ 0xB1, 0x02, /* Feature (Variable), */
+ 0x85, 0x84, /* Report ID (132), */
+ 0x09, 0x24, /* Usage (24h), */
+ 0xB1, 0x02, /* Feature (Variable), */
+ 0x85, 0x90, /* Report ID (144), */
+ 0x09, 0x30, /* Usage (30h), */
+ 0xB1, 0x02, /* Feature (Variable), */
+ 0x85, 0x91, /* Report ID (145), */
+ 0x09, 0x31, /* Usage (31h), */
+ 0xB1, 0x02, /* Feature (Variable), */
+ 0x85, 0x92, /* Report ID (146), */
+ 0x09, 0x32, /* Usage (32h), */
+ 0xB1, 0x02, /* Feature (Variable), */
+ 0x85, 0x93, /* Report ID (147), */
+ 0x09, 0x33, /* Usage (33h), */
+ 0xB1, 0x02, /* Feature (Variable), */
+ 0x85, 0xA0, /* Report ID (160), */
+ 0x09, 0x40, /* Usage (40h), */
+ 0xB1, 0x02, /* Feature (Variable), */
+ 0x85, 0xA4, /* Report ID (164), */
+ 0x09, 0x44, /* Usage (44h), */
+ 0xB1, 0x02, /* Feature (Variable), */
+ 0xC0 /* End Collection */
+};
+
static __u8 ps3remote_rdesc[] = {
0x05, 0x01, /* GUsagePage Generic Desktop */
0x09, 0x05, /* LUsage 0x05 [Game Pad] */
};
static const unsigned int buzz_keymap[] = {
- /* The controller has 4 remote buzzers, each with one LED and 5
+ /*
+ * The controller has 4 remote buzzers, each with one LED and 5
* buttons.
*
* We use the mapping chosen by the controller, which is:
[20] = BTN_TRIGGER_HAPPY20,
};
+static enum power_supply_property sony_battery_props[] = {
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_SCOPE,
+ POWER_SUPPLY_PROP_STATUS,
+};
+
+static spinlock_t sony_dev_list_lock;
+static LIST_HEAD(sony_device_list);
+
struct sony_sc {
+ spinlock_t lock;
+ struct list_head list_node;
struct hid_device *hdev;
struct led_classdev *leds[MAX_LEDS];
- struct hid_report *output_report;
unsigned long quirks;
struct work_struct state_worker;
+ struct power_supply battery;
#ifdef CONFIG_SONY_FF
__u8 left;
__u8 right;
#endif
+ __u8 mac_address[6];
+ __u8 worker_initialized;
+ __u8 cable_state;
+ __u8 battery_charging;
+ __u8 battery_capacity;
__u8 led_state[MAX_LEDS];
__u8 led_count;
};
hid_info(hdev, "Using modified Dualshock 4 report descriptor with gyroscope axes\n");
rdesc = dualshock4_usb_rdesc;
*rsize = sizeof(dualshock4_usb_rdesc);
+ } else if ((sc->quirks & DUALSHOCK4_CONTROLLER_BT) && *rsize == 357) {
+ hid_info(hdev, "Using modified Dualshock 4 Bluetooth report descriptor\n");
+ rdesc = dualshock4_bt_rdesc;
+ *rsize = sizeof(dualshock4_bt_rdesc);
}
/* The HID descriptor exposed over BT has a trailing zero byte */
return rdesc;
}
+static void sixaxis_parse_report(struct sony_sc *sc, __u8 *rd, int size)
+{
+ static const __u8 sixaxis_battery_capacity[] = { 0, 1, 25, 50, 75, 100 };
+ unsigned long flags;
+ __u8 cable_state, battery_capacity, battery_charging;
+
+ /*
+ * The sixaxis is charging if the battery value is 0xee
+ * and it is fully charged if the value is 0xef.
+ * It does not report the actual level while charging so it
+ * is set to 100% while charging is in progress.
+ */
+ if (rd[30] >= 0xee) {
+ battery_capacity = 100;
+ battery_charging = !(rd[30] & 0x01);
+ } else {
+ __u8 index = rd[30] <= 5 ? rd[30] : 5;
+ battery_capacity = sixaxis_battery_capacity[index];
+ battery_charging = 0;
+ }
+ cable_state = !(rd[31] & 0x04);
+
+ spin_lock_irqsave(&sc->lock, flags);
+ sc->cable_state = cable_state;
+ sc->battery_capacity = battery_capacity;
+ sc->battery_charging = battery_charging;
+ spin_unlock_irqrestore(&sc->lock, flags);
+}
+
+static void dualshock4_parse_report(struct sony_sc *sc, __u8 *rd, int size)
+{
+ struct hid_input *hidinput = list_entry(sc->hdev->inputs.next,
+ struct hid_input, list);
+ struct input_dev *input_dev = hidinput->input;
+ unsigned long flags;
+ int n, offset;
+ __u8 cable_state, battery_capacity, battery_charging;
+
+ /*
+ * Battery and touchpad data starts at byte 30 in the USB report and
+ * 32 in Bluetooth report.
+ */
+ offset = (sc->quirks & DUALSHOCK4_CONTROLLER_USB) ? 30 : 32;
+
+ /*
+ * The lower 4 bits of byte 30 contain the battery level
+ * and the 5th bit contains the USB cable state.
+ */
+ cable_state = (rd[offset] >> 4) & 0x01;
+ battery_capacity = rd[offset] & 0x0F;
+
+ /*
+ * When a USB power source is connected the battery level ranges from
+ * 0 to 10, and when running on battery power it ranges from 0 to 9.
+ * A battery level above 10 when plugged in means charge completed.
+ */
+ if (!cable_state || battery_capacity > 10)
+ battery_charging = 0;
+ else
+ battery_charging = 1;
+
+ if (!cable_state)
+ battery_capacity++;
+ if (battery_capacity > 10)
+ battery_capacity = 10;
+
+ battery_capacity *= 10;
+
+ spin_lock_irqsave(&sc->lock, flags);
+ sc->cable_state = cable_state;
+ sc->battery_capacity = battery_capacity;
+ sc->battery_charging = battery_charging;
+ spin_unlock_irqrestore(&sc->lock, flags);
+
+ offset += 5;
+
+ /*
+ * The Dualshock 4 multi-touch trackpad data starts at offset 35 on USB
+ * and 37 on Bluetooth.
+ * The first 7 bits of the first byte is a counter and bit 8 is a touch
+ * indicator that is 0 when pressed and 1 when not pressed.
+ * The next 3 bytes are two 12 bit touch coordinates, X and Y.
+ * The data for the second touch is in the same format and immediatly
+ * follows the data for the first.
+ */
+ for (n = 0; n < 2; n++) {
+ __u16 x, y;
+
+ x = rd[offset+1] | ((rd[offset+2] & 0xF) << 8);
+ y = ((rd[offset+2] & 0xF0) >> 4) | (rd[offset+3] << 4);
+
+ input_mt_slot(input_dev, n);
+ input_mt_report_slot_state(input_dev, MT_TOOL_FINGER,
+ !(rd[offset] >> 7));
+ input_report_abs(input_dev, ABS_MT_POSITION_X, x);
+ input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
+
+ offset += 4;
+ }
+}
+
static int sony_raw_event(struct hid_device *hdev, struct hid_report *report,
__u8 *rd, int size)
{
struct sony_sc *sc = hid_get_drvdata(hdev);
- /* Sixaxis HID report has acclerometers/gyro with MSByte first, this
+ /*
+ * Sixaxis HID report has acclerometers/gyro with MSByte first, this
* has to be BYTE_SWAPPED before passing up to joystick interface
*/
- if ((sc->quirks & (SIXAXIS_CONTROLLER_USB | SIXAXIS_CONTROLLER_BT)) &&
- rd[0] == 0x01 && size == 49) {
+ if ((sc->quirks & SIXAXIS_CONTROLLER) && rd[0] == 0x01 && size == 49) {
swap(rd[41], rd[42]);
swap(rd[43], rd[44]);
swap(rd[45], rd[46]);
swap(rd[47], rd[48]);
+
+ sixaxis_parse_report(sc, rd, size);
+ } else if (((sc->quirks & DUALSHOCK4_CONTROLLER_USB) && rd[0] == 0x01 &&
+ size == 64) || ((sc->quirks & DUALSHOCK4_CONTROLLER_BT)
+ && rd[0] == 0x11 && size == 78)) {
+ dualshock4_parse_report(sc, rd, size);
}
return 0;
return 0;
}
-/*
- * The Sony Sixaxis does not handle HID Output Reports on the Interrupt EP
- * like it should according to usbhid/hid-core.c::usbhid_output_raw_report()
- * so we need to override that forcing HID Output Reports on the Control EP.
- *
- * There is also another issue about HID Output Reports via USB, the Sixaxis
- * does not want the report_id as part of the data packet, so we have to
- * discard buf[0] when sending the actual control message, even for numbered
- * reports, humpf!
- */
-static int sixaxis_usb_output_raw_report(struct hid_device *hid, __u8 *buf,
- size_t count, unsigned char report_type)
-{
- struct usb_interface *intf = to_usb_interface(hid->dev.parent);
- struct usb_device *dev = interface_to_usbdev(intf);
- struct usb_host_interface *interface = intf->cur_altsetting;
- int report_id = buf[0];
- int ret;
-
- if (report_type == HID_OUTPUT_REPORT) {
- /* Don't send the Report ID */
- buf++;
- count--;
- }
-
- ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
- HID_REQ_SET_REPORT,
- USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- ((report_type + 1) << 8) | report_id,
- interface->desc.bInterfaceNumber, buf, count,
- USB_CTRL_SET_TIMEOUT);
-
- /* Count also the Report ID, in case of an Output report. */
- if (ret > 0 && report_type == HID_OUTPUT_REPORT)
- ret++;
-
- return ret;
-}
-
/*
* Sending HID_REQ_GET_REPORT changes the operation mode of the ps3 controller
* to "operational". Without this, the ps3 controller will not report any
HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
}
+/*
+ * Requesting feature report 0x02 in Bluetooth mode changes the state of the
+ * controller so that it sends full input reports of type 0x11.
+ */
+static int dualshock4_set_operational_bt(struct hid_device *hdev)
+{
+ __u8 buf[37] = { 0 };
+
+ return hid_hw_raw_request(hdev, 0x02, buf, sizeof(buf),
+ HID_FEATURE_REPORT, HID_REQ_GET_REPORT);
+}
+
static void buzz_set_leds(struct hid_device *hdev, const __u8 *leds)
{
struct list_head *report_list =
if (drv_data->quirks & BUZZ_CONTROLLER && count == 4) {
buzz_set_leds(hdev, leds);
- } else if ((drv_data->quirks & SIXAXIS_CONTROLLER_USB) ||
- (drv_data->quirks & DUALSHOCK4_CONTROLLER_USB)) {
+ } else {
for (n = 0; n < count; n++)
drv_data->led_state[n] = leds[n];
schedule_work(&drv_data->state_worker);
struct sony_sc *drv_data;
int n;
- int on = 0;
drv_data = hid_get_drvdata(hdev);
if (!drv_data) {
}
for (n = 0; n < drv_data->led_count; n++) {
- if (led == drv_data->leds[n]) {
- on = !!(drv_data->led_state[n]);
- break;
- }
+ if (led == drv_data->leds[n])
+ return drv_data->led_state[n];
}
- return on ? LED_FULL : LED_OFF;
+ return LED_OFF;
}
static void sony_leds_remove(struct hid_device *hdev)
/* Validate expected report characteristics. */
if (!hid_validate_values(hdev, HID_OUTPUT_REPORT, 0, 0, 7))
return -ENODEV;
- } else if (drv_data->quirks & DUALSHOCK4_CONTROLLER_USB) {
+ } else if (drv_data->quirks & DUALSHOCK4_CONTROLLER) {
drv_data->led_count = 3;
max_brightness = 255;
use_colors = 1;
name_fmt = "%s::sony%d";
}
- /* Clear LEDs as we have no way of reading their initial state. This is
+ /*
+ * Clear LEDs as we have no way of reading their initial state. This is
* only relevant if the driver is loaded after somebody actively set the
- * LEDs to on */
+ * LEDs to on
+ */
sony_set_leds(hdev, initial_values, drv_data->led_count);
name_sz = strlen(dev_name(&hdev->dev)) + name_len + 1;
buf[10] |= sc->led_state[2] << 3;
buf[10] |= sc->led_state[3] << 4;
- hid_output_raw_report(sc->hdev, buf, sizeof(buf), HID_OUTPUT_REPORT);
+ hid_hw_raw_request(sc->hdev, 0x01, buf, sizeof(buf), HID_OUTPUT_REPORT,
+ HID_REQ_SET_REPORT);
}
static void dualshock4_state_worker(struct work_struct *work)
{
struct sony_sc *sc = container_of(work, struct sony_sc, state_worker);
struct hid_device *hdev = sc->hdev;
- struct hid_report *report = sc->output_report;
- __s32 *value = report->field[0]->value;
+ int offset;
- value[0] = 0x03;
+ __u8 buf[78] = { 0 };
+
+ if (sc->quirks & DUALSHOCK4_CONTROLLER_USB) {
+ buf[0] = 0x05;
+ buf[1] = 0x03;
+ offset = 4;
+ } else {
+ buf[0] = 0x11;
+ buf[1] = 0xB0;
+ buf[3] = 0x0F;
+ offset = 6;
+ }
#ifdef CONFIG_SONY_FF
- value[3] = sc->right;
- value[4] = sc->left;
+ buf[offset++] = sc->right;
+ buf[offset++] = sc->left;
+#else
+ offset += 2;
#endif
- value[5] = sc->led_state[0];
- value[6] = sc->led_state[1];
- value[7] = sc->led_state[2];
+ buf[offset++] = sc->led_state[0];
+ buf[offset++] = sc->led_state[1];
+ buf[offset++] = sc->led_state[2];
- hid_hw_request(hdev, report, HID_REQ_SET_REPORT);
+ if (sc->quirks & DUALSHOCK4_CONTROLLER_USB)
+ hid_hw_output_report(hdev, buf, 32);
+ else
+ hid_hw_raw_request(hdev, 0x11, buf, 78,
+ HID_OUTPUT_REPORT, HID_REQ_SET_REPORT);
}
#ifdef CONFIG_SONY_FF
return input_ff_create_memless(input_dev, NULL, sony_play_effect);
}
-static void sony_destroy_ff(struct hid_device *hdev)
+#else
+static int sony_init_ff(struct hid_device *hdev)
{
- struct sony_sc *sc = hid_get_drvdata(hdev);
+ return 0;
+}
+
+#endif
+
+static int sony_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct sony_sc *sc = container_of(psy, struct sony_sc, battery);
+ unsigned long flags;
+ int ret = 0;
+ u8 battery_charging, battery_capacity, cable_state;
+
+ spin_lock_irqsave(&sc->lock, flags);
+ battery_charging = sc->battery_charging;
+ battery_capacity = sc->battery_capacity;
+ cable_state = sc->cable_state;
+ spin_unlock_irqrestore(&sc->lock, flags);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = 1;
+ break;
+ case POWER_SUPPLY_PROP_SCOPE:
+ val->intval = POWER_SUPPLY_SCOPE_DEVICE;
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ val->intval = battery_capacity;
+ break;
+ case POWER_SUPPLY_PROP_STATUS:
+ if (battery_charging)
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else
+ if (battery_capacity == 100 && cable_state)
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ else
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static int sony_battery_probe(struct sony_sc *sc)
+{
+ static atomic_t power_id_seq = ATOMIC_INIT(0);
+ unsigned long power_id;
+ struct hid_device *hdev = sc->hdev;
+ int ret;
+
+ /*
+ * Set the default battery level to 100% to avoid low battery warnings
+ * if the battery is polled before the first device report is received.
+ */
+ sc->battery_capacity = 100;
+
+ power_id = (unsigned long)atomic_inc_return(&power_id_seq);
+
+ sc->battery.properties = sony_battery_props;
+ sc->battery.num_properties = ARRAY_SIZE(sony_battery_props);
+ sc->battery.get_property = sony_battery_get_property;
+ sc->battery.type = POWER_SUPPLY_TYPE_BATTERY;
+ sc->battery.use_for_apm = 0;
+ sc->battery.name = kasprintf(GFP_KERNEL, "sony_controller_battery_%lu",
+ power_id);
+ if (!sc->battery.name)
+ return -ENOMEM;
+
+ ret = power_supply_register(&hdev->dev, &sc->battery);
+ if (ret) {
+ hid_err(hdev, "Unable to register battery device\n");
+ goto err_free;
+ }
+
+ power_supply_powers(&sc->battery, &hdev->dev);
+ return 0;
- cancel_work_sync(&sc->state_worker);
+err_free:
+ kfree(sc->battery.name);
+ sc->battery.name = NULL;
+ return ret;
}
-#else
-static int sony_init_ff(struct hid_device *hdev)
+static void sony_battery_remove(struct sony_sc *sc)
+{
+ if (!sc->battery.name)
+ return;
+
+ power_supply_unregister(&sc->battery);
+ kfree(sc->battery.name);
+ sc->battery.name = NULL;
+}
+
+static int sony_register_touchpad(struct sony_sc *sc, int touch_count,
+ int w, int h)
{
+ struct hid_input *hidinput = list_entry(sc->hdev->inputs.next,
+ struct hid_input, list);
+ struct input_dev *input_dev = hidinput->input;
+ int ret;
+
+ ret = input_mt_init_slots(input_dev, touch_count, 0);
+ if (ret < 0) {
+ hid_err(sc->hdev, "Unable to initialize multi-touch slots\n");
+ return ret;
+ }
+
+ input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, w, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, h, 0, 0);
+
return 0;
}
-static void sony_destroy_ff(struct hid_device *hdev)
+/*
+ * If a controller is plugged in via USB while already connected via Bluetooth
+ * it will show up as two devices. A global list of connected controllers and
+ * their MAC addresses is maintained to ensure that a device is only connected
+ * once.
+ */
+static int sony_check_add_dev_list(struct sony_sc *sc)
{
+ struct sony_sc *entry;
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&sony_dev_list_lock, flags);
+
+ list_for_each_entry(entry, &sony_device_list, list_node) {
+ ret = memcmp(sc->mac_address, entry->mac_address,
+ sizeof(sc->mac_address));
+ if (!ret) {
+ ret = -EEXIST;
+ hid_info(sc->hdev, "controller with MAC address %pMR already connected\n",
+ sc->mac_address);
+ goto unlock;
+ }
+ }
+
+ ret = 0;
+ list_add(&(sc->list_node), &sony_device_list);
+
+unlock:
+ spin_unlock_irqrestore(&sony_dev_list_lock, flags);
+ return ret;
}
-#endif
-static int sony_set_output_report(struct sony_sc *sc, int req_id, int req_size)
+static void sony_remove_dev_list(struct sony_sc *sc)
{
- struct list_head *head, *list;
- struct hid_report *report;
- struct hid_device *hdev = sc->hdev;
+ unsigned long flags;
- list = &hdev->report_enum[HID_OUTPUT_REPORT].report_list;
+ if (sc->list_node.next) {
+ spin_lock_irqsave(&sony_dev_list_lock, flags);
+ list_del(&(sc->list_node));
+ spin_unlock_irqrestore(&sony_dev_list_lock, flags);
+ }
+}
+
+static int sony_get_bt_devaddr(struct sony_sc *sc)
+{
+ int ret;
- list_for_each(head, list) {
- report = list_entry(head, struct hid_report, list);
+ /* HIDP stores the device MAC address as a string in the uniq field. */
+ ret = strlen(sc->hdev->uniq);
+ if (ret != 17)
+ return -EINVAL;
- if (report->id == req_id) {
- if (report->size < req_size) {
- hid_err(hdev, "Output report 0x%02x (%i bits) is smaller than requested size (%i bits)\n",
- req_id, report->size, req_size);
- return -EINVAL;
- }
- sc->output_report = report;
+ ret = sscanf(sc->hdev->uniq,
+ "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
+ &sc->mac_address[5], &sc->mac_address[4], &sc->mac_address[3],
+ &sc->mac_address[2], &sc->mac_address[1], &sc->mac_address[0]);
+
+ if (ret != 6)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int sony_check_add(struct sony_sc *sc)
+{
+ int n, ret;
+
+ if ((sc->quirks & DUALSHOCK4_CONTROLLER_BT) ||
+ (sc->quirks & SIXAXIS_CONTROLLER_BT)) {
+ /*
+ * sony_get_bt_devaddr() attempts to parse the Bluetooth MAC
+ * address from the uniq string where HIDP stores it.
+ * As uniq cannot be guaranteed to be a MAC address in all cases
+ * a failure of this function should not prevent the connection.
+ */
+ if (sony_get_bt_devaddr(sc) < 0) {
+ hid_warn(sc->hdev, "UNIQ does not contain a MAC address; duplicate check skipped\n");
return 0;
}
- }
+ } else if (sc->quirks & DUALSHOCK4_CONTROLLER_USB) {
+ __u8 buf[7];
+
+ /*
+ * The MAC address of a DS4 controller connected via USB can be
+ * retrieved with feature report 0x81. The address begins at
+ * offset 1.
+ */
+ ret = hid_hw_raw_request(sc->hdev, 0x81, buf, sizeof(buf),
+ HID_FEATURE_REPORT, HID_REQ_GET_REPORT);
+
+ if (ret != 7) {
+ hid_err(sc->hdev, "failed to retrieve feature report 0x81 with the DualShock 4 MAC address\n");
+ return ret < 0 ? ret : -EINVAL;
+ }
- hid_err(hdev, "Unable to locate output report 0x%02x\n", req_id);
+ memcpy(sc->mac_address, &buf[1], sizeof(sc->mac_address));
+ } else if (sc->quirks & SIXAXIS_CONTROLLER_USB) {
+ __u8 buf[18];
+
+ /*
+ * The MAC address of a Sixaxis controller connected via USB can
+ * be retrieved with feature report 0xf2. The address begins at
+ * offset 4.
+ */
+ ret = hid_hw_raw_request(sc->hdev, 0xf2, buf, sizeof(buf),
+ HID_FEATURE_REPORT, HID_REQ_GET_REPORT);
+
+ if (ret != 18) {
+ hid_err(sc->hdev, "failed to retrieve feature report 0xf2 with the Sixaxis MAC address\n");
+ return ret < 0 ? ret : -EINVAL;
+ }
- return -EINVAL;
+ /*
+ * The Sixaxis device MAC in the report is big-endian and must
+ * be byte-swapped.
+ */
+ for (n = 0; n < 6; n++)
+ sc->mac_address[5-n] = buf[4+n];
+ } else {
+ return 0;
+ }
+
+ return sony_check_add_dev_list(sc);
}
+
static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id)
{
int ret;
}
if (sc->quirks & SIXAXIS_CONTROLLER_USB) {
- hdev->hid_output_raw_report = sixaxis_usb_output_raw_report;
+ /*
+ * The Sony Sixaxis does not handle HID Output Reports on the
+ * Interrupt EP like it could, so we need to force HID Output
+ * Reports to use HID_REQ_SET_REPORT on the Control EP.
+ *
+ * There is also another issue about HID Output Reports via USB,
+ * the Sixaxis does not want the report_id as part of the data
+ * packet, so we have to discard buf[0] when sending the actual
+ * control message, even for numbered reports, humpf!
+ */
+ hdev->quirks |= HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP;
+ hdev->quirks |= HID_QUIRK_SKIP_OUTPUT_REPORT_ID;
ret = sixaxis_set_operational_usb(hdev);
+ sc->worker_initialized = 1;
INIT_WORK(&sc->state_worker, sixaxis_state_worker);
- }
- else if (sc->quirks & SIXAXIS_CONTROLLER_BT)
+ } else if (sc->quirks & SIXAXIS_CONTROLLER_BT) {
+ /*
+ * The Sixaxis wants output reports sent on the ctrl endpoint
+ * when connected via Bluetooth.
+ */
+ hdev->quirks |= HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP;
ret = sixaxis_set_operational_bt(hdev);
- else if (sc->quirks & DUALSHOCK4_CONTROLLER_USB) {
- /* Report 5 (31 bytes) is used to send data to the controller via USB */
- ret = sony_set_output_report(sc, 0x05, 248);
+ sc->worker_initialized = 1;
+ INIT_WORK(&sc->state_worker, sixaxis_state_worker);
+ } else if (sc->quirks & DUALSHOCK4_CONTROLLER) {
+ if (sc->quirks & DUALSHOCK4_CONTROLLER_BT) {
+ /*
+ * The DualShock 4 wants output reports sent on the ctrl
+ * endpoint when connected via Bluetooth.
+ */
+ hdev->quirks |= HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP;
+ ret = dualshock4_set_operational_bt(hdev);
+ if (ret < 0) {
+ hid_err(hdev, "failed to set the Dualshock 4 operational mode\n");
+ goto err_stop;
+ }
+ }
+ /*
+ * The Dualshock 4 touchpad supports 2 touches and has a
+ * resolution of 1920x940.
+ */
+ ret = sony_register_touchpad(sc, 2, 1920, 940);
if (ret < 0)
goto err_stop;
+ sc->worker_initialized = 1;
INIT_WORK(&sc->state_worker, dualshock4_state_worker);
} else {
ret = 0;
}
+ if (ret < 0)
+ goto err_stop;
+
+ ret = sony_check_add(sc);
if (ret < 0)
goto err_stop;
goto err_stop;
}
- ret = sony_init_ff(hdev);
- if (ret < 0)
- goto err_stop;
+ if (sc->quirks & SONY_FF_SUPPORT) {
+ ret = sony_init_ff(hdev);
+ if (ret < 0)
+ goto err_stop;
+ if (sc->quirks & SONY_BATTERY_SUPPORT) {
+ ret = sony_battery_probe(sc);
+ if (ret < 0)
+ goto err_stop;
+
+ /* Open the device to receive reports with battery info */
+ ret = hid_hw_open(hdev);
+ if (ret < 0) {
+ hid_err(hdev, "hw open failed\n");
+ goto err_stop;
+ }
+ }
+
+ if (sc->quirks & SONY_FF_SUPPORT) {
+ ret = sony_init_ff(hdev);
+ if (ret < 0)
+ goto err_close;
+ }
return 0;
+err_close:
+ hid_hw_close(hdev);
err_stop:
if (sc->quirks & SONY_LED_SUPPORT)
sony_leds_remove(hdev);
+ if (sc->quirks & SONY_BATTERY_SUPPORT)
+ sony_battery_remove(sc);
+ if (sc->worker_initialized)
+ cancel_work_sync(&sc->state_worker);
+ sony_remove_dev_list(sc);
hid_hw_stop(hdev);
return ret;
}
if (sc->quirks & SONY_LED_SUPPORT)
sony_leds_remove(hdev);
- sony_destroy_ff(hdev);
+ if (sc->worker_initialized)
+ cancel_work_sync(&sc->state_worker);
+ if (sc->quirks & SONY_BATTERY_SUPPORT) {
+ hid_hw_close(hdev);
+ sony_battery_remove(sc);
+ }
+
+ if (sc->worker_initialized)
+ cancel_work_sync(&sc->state_worker);
+
+ sony_remove_dev_list(sc);
hid_hw_stop(hdev);
}
goto out_free;
}
- if (report_type == HID_OUTPUT_REPORT) {
+ if ((report_type == HID_OUTPUT_REPORT) &&
+ !(dev->quirks & HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP)) {
ret = hid_hw_output_report(dev, buf, count);
/*
* compatibility with old implementation of USB-HID and I2C-HID:
hid_hw_close(hidraw->hid);
wake_up_interruptible(&hidraw->wait);
}
+ device_destroy(hidraw_class,
+ MKDEV(hidraw_major, hidraw->minor));
} else {
--hidraw->open;
}
if (!hidraw->open) {
if (!hidraw->exist) {
- device_destroy(hidraw_class,
- MKDEV(hidraw_major, hidraw->minor));
hidraw_table[hidraw->minor] = NULL;
kfree(hidraw);
} else {
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/pm.h>
+#include <linux/pm_runtime.h>
#include <linux/device.h>
#include <linux/wait.h>
#include <linux/err.h>
return;
}
+ /*
+ * The device must be powered on while we fetch initial reports
+ * from it.
+ */
+ pm_runtime_get_sync(&client->dev);
+
list_for_each_entry(report,
&hid->report_enum[HID_FEATURE_REPORT].report_list, list)
i2c_hid_init_report(report, inbuf, ihid->bufsize);
+ pm_runtime_put(&client->dev);
+
kfree(inbuf);
}
return ret;
}
-static int __i2c_hid_output_raw_report(struct hid_device *hid, __u8 *buf,
- size_t count, unsigned char report_type)
-{
- struct i2c_client *client = hid->driver_data;
- struct i2c_hid *ihid = i2c_get_clientdata(client);
- bool data = true; /* SET_REPORT */
-
- if (report_type == HID_OUTPUT_REPORT)
- data = le16_to_cpu(ihid->hdesc.wMaxOutputLength) == 0;
-
- return i2c_hid_output_raw_report(hid, buf, count, report_type, data);
-}
-
static int i2c_hid_output_report(struct hid_device *hid, __u8 *buf,
size_t count)
{
mutex_lock(&i2c_hid_open_mut);
if (!hid->open++) {
- ret = i2c_hid_set_power(client, I2C_HID_PWR_ON);
- if (ret) {
+ ret = pm_runtime_get_sync(&client->dev);
+ if (ret < 0) {
hid->open--;
goto done;
}
}
done:
mutex_unlock(&i2c_hid_open_mut);
- return ret;
+ return ret < 0 ? ret : 0;
}
static void i2c_hid_close(struct hid_device *hid)
clear_bit(I2C_HID_STARTED, &ihid->flags);
/* Save some power */
- i2c_hid_set_power(client, I2C_HID_PWR_SLEEP);
+ pm_runtime_put(&client->dev);
}
mutex_unlock(&i2c_hid_open_mut);
}
{
struct i2c_client *client = hid->driver_data;
struct i2c_hid *ihid = i2c_get_clientdata(client);
- int ret = 0;
i2c_hid_dbg(ihid, "%s lvl:%d\n", __func__, lvl);
switch (lvl) {
case PM_HINT_FULLON:
- ret = i2c_hid_set_power(client, I2C_HID_PWR_ON);
+ pm_runtime_get_sync(&client->dev);
break;
case PM_HINT_NORMAL:
- ret = i2c_hid_set_power(client, I2C_HID_PWR_SLEEP);
+ pm_runtime_put(&client->dev);
break;
}
- return ret;
+ return 0;
}
static struct hid_ll_driver i2c_hid_ll_driver = {
if (ret < 0)
goto err;
+ pm_runtime_get_noresume(&client->dev);
+ pm_runtime_set_active(&client->dev);
+ pm_runtime_enable(&client->dev);
+
ret = i2c_hid_fetch_hid_descriptor(ihid);
if (ret < 0)
- goto err;
+ goto err_pm;
ret = i2c_hid_init_irq(client);
if (ret < 0)
- goto err;
+ goto err_pm;
hid = hid_allocate_device();
if (IS_ERR(hid)) {
hid->driver_data = client;
hid->ll_driver = &i2c_hid_ll_driver;
- hid->hid_output_raw_report = __i2c_hid_output_raw_report;
hid->dev.parent = &client->dev;
ACPI_COMPANION_SET(&hid->dev, ACPI_COMPANION(&client->dev));
hid->bus = BUS_I2C;
goto err_mem_free;
}
+ pm_runtime_put(&client->dev);
return 0;
err_mem_free:
err_irq:
free_irq(client->irq, ihid);
+err_pm:
+ pm_runtime_put_noidle(&client->dev);
+ pm_runtime_disable(&client->dev);
+
err:
i2c_hid_free_buffers(ihid);
kfree(ihid);
struct i2c_hid *ihid = i2c_get_clientdata(client);
struct hid_device *hid;
+ pm_runtime_get_sync(&client->dev);
+ pm_runtime_disable(&client->dev);
+ pm_runtime_set_suspended(&client->dev);
+ pm_runtime_put_noidle(&client->dev);
+
hid = ihid->hid;
hid_destroy_device(hid);
}
#endif
-static SIMPLE_DEV_PM_OPS(i2c_hid_pm, i2c_hid_suspend, i2c_hid_resume);
+#ifdef CONFIG_PM_RUNTIME
+static int i2c_hid_runtime_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+
+ i2c_hid_set_power(client, I2C_HID_PWR_SLEEP);
+ disable_irq(client->irq);
+ return 0;
+}
+
+static int i2c_hid_runtime_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+
+ enable_irq(client->irq);
+ i2c_hid_set_power(client, I2C_HID_PWR_ON);
+ return 0;
+}
+#endif
+
+static const struct dev_pm_ops i2c_hid_pm = {
+ SET_SYSTEM_SLEEP_PM_OPS(i2c_hid_suspend, i2c_hid_resume)
+ SET_RUNTIME_PM_OPS(i2c_hid_runtime_suspend, i2c_hid_runtime_resume,
+ NULL)
+};
static const struct i2c_device_id i2c_hid_id_table[] = {
{ "hid", 0 },
hid->uniq[63] = 0;
hid->ll_driver = &uhid_hid_driver;
- hid->hid_output_raw_report = uhid_hid_output_raw;
hid->bus = ev->u.create.bus;
hid->vendor = ev->u.create.vendor;
hid->product = ev->u.create.product;
return ret;
}
+static int uhid_dev_create2(struct uhid_device *uhid,
+ const struct uhid_event *ev)
+{
+ struct hid_device *hid;
+ int ret;
+
+ if (uhid->running)
+ return -EALREADY;
+
+ uhid->rd_size = ev->u.create2.rd_size;
+ if (uhid->rd_size <= 0 || uhid->rd_size > HID_MAX_DESCRIPTOR_SIZE)
+ return -EINVAL;
+
+ uhid->rd_data = kmalloc(uhid->rd_size, GFP_KERNEL);
+ if (!uhid->rd_data)
+ return -ENOMEM;
+
+ memcpy(uhid->rd_data, ev->u.create2.rd_data, uhid->rd_size);
+
+ hid = hid_allocate_device();
+ if (IS_ERR(hid)) {
+ ret = PTR_ERR(hid);
+ goto err_free;
+ }
+
+ strncpy(hid->name, ev->u.create2.name, 127);
+ hid->name[127] = 0;
+ strncpy(hid->phys, ev->u.create2.phys, 63);
+ hid->phys[63] = 0;
+ strncpy(hid->uniq, ev->u.create2.uniq, 63);
+ hid->uniq[63] = 0;
+
+ hid->ll_driver = &uhid_hid_driver;
+ hid->bus = ev->u.create2.bus;
+ hid->vendor = ev->u.create2.vendor;
+ hid->product = ev->u.create2.product;
+ hid->version = ev->u.create2.version;
+ hid->country = ev->u.create2.country;
+ hid->driver_data = uhid;
+ hid->dev.parent = uhid_misc.this_device;
+
+ uhid->hid = hid;
+ uhid->running = true;
+
+ ret = hid_add_device(hid);
+ if (ret) {
+ hid_err(hid, "Cannot register HID device\n");
+ goto err_hid;
+ }
+
+ return 0;
+
+err_hid:
+ hid_destroy_device(hid);
+ uhid->hid = NULL;
+ uhid->running = false;
+err_free:
+ kfree(uhid->rd_data);
+ return ret;
+}
+
static int uhid_dev_destroy(struct uhid_device *uhid)
{
if (!uhid->running)
return 0;
}
+static int uhid_dev_input2(struct uhid_device *uhid, struct uhid_event *ev)
+{
+ if (!uhid->running)
+ return -EINVAL;
+
+ hid_input_report(uhid->hid, HID_INPUT_REPORT, ev->u.input2.data,
+ min_t(size_t, ev->u.input2.size, UHID_DATA_MAX), 0);
+
+ return 0;
+}
+
static int uhid_dev_feature_answer(struct uhid_device *uhid,
struct uhid_event *ev)
{
case UHID_CREATE:
ret = uhid_dev_create(uhid, &uhid->input_buf);
break;
+ case UHID_CREATE2:
+ ret = uhid_dev_create2(uhid, &uhid->input_buf);
+ break;
case UHID_DESTROY:
ret = uhid_dev_destroy(uhid);
break;
case UHID_INPUT:
ret = uhid_dev_input(uhid, &uhid->input_buf);
break;
+ case UHID_INPUT2:
+ ret = uhid_dev_input2(uhid, &uhid->input_buf);
+ break;
case UHID_FEATURE_ANSWER:
ret = uhid_dev_feature_answer(uhid, &uhid->input_buf);
break;
int ret, skipped_report_id = 0;
/* Byte 0 is the report number. Report data starts at byte 1.*/
- buf[0] = reportnum;
+ if ((rtype == HID_OUTPUT_REPORT) &&
+ (hid->quirks & HID_QUIRK_SKIP_OUTPUT_REPORT_ID))
+ buf[0] = 0;
+ else
+ buf[0] = reportnum;
+
if (buf[0] == 0x0) {
/* Don't send the Report ID */
buf++;
return ret;
}
-static int usbhid_output_raw_report(struct hid_device *hid, __u8 *buf,
- size_t count, unsigned char report_type)
-{
- struct usbhid_device *usbhid = hid->driver_data;
-
- if (usbhid->urbout && report_type != HID_FEATURE_REPORT)
- return usbhid_output_report(hid, buf, count);
-
- return usbhid_set_raw_report(hid, buf[0], buf, count, report_type);
-}
-
static void usbhid_restart_queues(struct usbhid_device *usbhid)
{
if (usbhid->urbout && !test_bit(HID_OUT_RUNNING, &usbhid->iofl))
usb_set_intfdata(intf, hid);
hid->ll_driver = &usb_hid_driver;
- hid->hid_output_raw_report = usbhid_output_raw_report;
hid->ff_init = hid_pidff_init;
#ifdef CONFIG_USB_HIDDEV
hid->hiddev_connect = hiddev_connect;
{ USB_VENDOR_ID_FREESCALE, USB_DEVICE_ID_FREESCALE_MX28, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_MSI, USB_DEVICE_ID_MSI_GX680R_LED_PANEL, HID_QUIRK_NO_INIT_REPORTS },
+ { USB_VENDOR_ID_NEXIO, USB_DEVICE_ID_NEXIO_MULTITOUCH_PTI0750, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_NOVATEK, USB_DEVICE_ID_NOVATEK_MOUSE, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN1, HID_QUIRK_NO_INIT_REPORTS },
if (state) {
if (sensor_hub_device_open(st->hsdev))
return -EIO;
- state_val =
- HID_USAGE_SENSOR_PROP_POWER_STATE_D0_FULL_POWER_ENUM;
- report_val =
- HID_USAGE_SENSOR_PROP_REPORTING_STATE_ALL_EVENTS_ENUM;
-
+ state_val = hid_sensor_get_usage_index(st->hsdev,
+ st->power_state.report_id,
+ st->power_state.index,
+ HID_USAGE_SENSOR_PROP_POWER_STATE_D0_FULL_POWER_ENUM);
+ report_val = hid_sensor_get_usage_index(st->hsdev,
+ st->report_state.report_id,
+ st->report_state.index,
+ HID_USAGE_SENSOR_PROP_REPORTING_STATE_ALL_EVENTS_ENUM);
} else {
sensor_hub_device_close(st->hsdev);
- state_val =
- HID_USAGE_SENSOR_PROP_POWER_STATE_D4_POWER_OFF_ENUM;
- report_val =
- HID_USAGE_SENSOR_PROP_REPORTING_STATE_NO_EVENTS_ENUM;
+ state_val = hid_sensor_get_usage_index(st->hsdev,
+ st->power_state.report_id,
+ st->power_state.index,
+ HID_USAGE_SENSOR_PROP_POWER_STATE_D4_POWER_OFF_ENUM);
+ report_val = hid_sensor_get_usage_index(st->hsdev,
+ st->report_state.report_id,
+ st->report_state.index,
+ HID_USAGE_SENSOR_PROP_REPORTING_STATE_NO_EVENTS_ENUM);
}
-
st->data_ready = state;
- state_val += st->power_state.logical_minimum;
- report_val += st->report_state.logical_minimum;
- sensor_hub_set_feature(st->hsdev, st->power_state.report_id,
+
+ if (state_val >= 0) {
+ state_val += st->power_state.logical_minimum;
+ sensor_hub_set_feature(st->hsdev, st->power_state.report_id,
st->power_state.index,
(s32)state_val);
+ }
- sensor_hub_set_feature(st->hsdev, st->report_state.report_id,
+ if (report_val >= 0) {
+ report_val += st->report_state.logical_minimum;
+ sensor_hub_set_feature(st->hsdev, st->report_state.report_id,
st->report_state.index,
(s32)report_val);
+ }
return 0;
}
* @hdev: Stores the hid instance.
* @vendor_id: Vendor id of hub device.
* @product_id: Product id of hub device.
- * @ref_cnt: Number of MFD clients have opened this device
+ * @start_collection_index: Starting index for a phy type collection
+ * @end_collection_index: Last index for a phy type collection
*/
struct hid_sensor_hub_device {
struct hid_device *hdev;
u32 vendor_id;
u32 product_id;
- int ref_cnt;
+ int start_collection_index;
+ int end_collection_index;
};
/**
int hid_sensor_read_samp_freq_value(struct hid_sensor_common *st,
int *val1, int *val2);
+int hid_sensor_get_usage_index(struct hid_sensor_hub_device *hsdev,
+ u32 report_id, int field_index, u32 usage_id);
+
#endif
#define HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS 0x1000
/* Power state enumerations */
-#define HID_USAGE_SENSOR_PROP_POWER_STATE_UNDEFINED_ENUM 0x00
-#define HID_USAGE_SENSOR_PROP_POWER_STATE_D0_FULL_POWER_ENUM 0x01
-#define HID_USAGE_SENSOR_PROP_POWER_STATE_D1_LOW_POWER_ENUM 0x02
-#define HID_USAGE_SENSOR_PROP_POWER_STATE_D2_STANDBY_WITH_WAKE_ENUM 0x03
-#define HID_USAGE_SENSOR_PROP_POWER_STATE_D3_SLEEP_WITH_WAKE_ENUM 0x04
-#define HID_USAGE_SENSOR_PROP_POWER_STATE_D4_POWER_OFF_ENUM 0x05
+#define HID_USAGE_SENSOR_PROP_POWER_STATE_UNDEFINED_ENUM 0x200850
+#define HID_USAGE_SENSOR_PROP_POWER_STATE_D0_FULL_POWER_ENUM 0x200851
+#define HID_USAGE_SENSOR_PROP_POWER_STATE_D1_LOW_POWER_ENUM 0x200852
+#define HID_USAGE_SENSOR_PROP_POWER_STATE_D2_STANDBY_WITH_WAKE_ENUM 0x200853
+#define HID_USAGE_SENSOR_PROP_POWER_STATE_D3_SLEEP_WITH_WAKE_ENUM 0x200854
+#define HID_USAGE_SENSOR_PROP_POWER_STATE_D4_POWER_OFF_ENUM 0x200855
/* Report State enumerations */
-#define HID_USAGE_SENSOR_PROP_REPORTING_STATE_NO_EVENTS_ENUM 0x00
-#define HID_USAGE_SENSOR_PROP_REPORTING_STATE_ALL_EVENTS_ENUM 0x01
+#define HID_USAGE_SENSOR_PROP_REPORTING_STATE_NO_EVENTS_ENUM 0x200840
+#define HID_USAGE_SENSOR_PROP_REPORTING_STATE_ALL_EVENTS_ENUM 0x200841
#endif
#define HID_QUIRK_NO_EMPTY_INPUT 0x00000100
#define HID_QUIRK_NO_INIT_INPUT_REPORTS 0x00000200
#define HID_QUIRK_SKIP_OUTPUT_REPORTS 0x00010000
+#define HID_QUIRK_SKIP_OUTPUT_REPORT_ID 0x00020000
+#define HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP 0x00040000
#define HID_QUIRK_FULLSPEED_INTERVAL 0x10000000
#define HID_QUIRK_NO_INIT_REPORTS 0x20000000
#define HID_QUIRK_NO_IGNORE 0x40000000
struct hid_usage *, __s32);
void (*hiddev_report_event) (struct hid_device *, struct hid_report *);
- /* handler for raw output data, used by hidraw */
- int (*hid_output_raw_report) (struct hid_device *, __u8 *, size_t, unsigned char);
-
/* debugging support via debugfs */
unsigned short debug;
struct dentry *debug_dir;
return -ENOSYS;
}
-/**
- * hid_output_raw_report - send an output or a feature report to the device
- *
- * @hdev: hid device
- * @buf: raw data to transfer
- * @len: length of buf
- * @report_type: HID_FEATURE_REPORT or HID_OUTPUT_REPORT
- *
- * @return: count of data transfered, negative if error
- */
-static inline int hid_output_raw_report(struct hid_device *hdev, __u8 *buf,
- size_t len, unsigned char report_type)
-{
- return hdev->hid_output_raw_report(hdev, buf, len, report_type);
-}
-
/**
* hid_hw_idle - send idle request to device
*
#include <linux/input.h>
#include <linux/types.h>
+#include <linux/hid.h>
enum uhid_event_type {
UHID_CREATE,
UHID_INPUT,
UHID_FEATURE,
UHID_FEATURE_ANSWER,
+ UHID_CREATE2,
+ UHID_INPUT2,
};
struct uhid_create_req {
__u32 country;
} __attribute__((__packed__));
+struct uhid_create2_req {
+ __u8 name[128];
+ __u8 phys[64];
+ __u8 uniq[64];
+ __u16 rd_size;
+ __u16 bus;
+ __u32 vendor;
+ __u32 product;
+ __u32 version;
+ __u32 country;
+ __u8 rd_data[HID_MAX_DESCRIPTOR_SIZE];
+} __attribute__((__packed__));
+
#define UHID_DATA_MAX 4096
enum uhid_report_type {
__u16 size;
} __attribute__((__packed__));
+struct uhid_input2_req {
+ __u16 size;
+ __u8 data[UHID_DATA_MAX];
+} __attribute__((__packed__));
+
struct uhid_output_req {
__u8 data[UHID_DATA_MAX];
__u16 size;
struct uhid_output_ev_req output_ev;
struct uhid_feature_req feature;
struct uhid_feature_answer_req feature_answer;
+ struct uhid_create2_req create2;
+ struct uhid_input2_req input2;
} u;
} __attribute__((__packed__));
data, count);
}
-static int hidp_output_raw_report(struct hid_device *hid, unsigned char *data,
- size_t count, unsigned char report_type)
-{
- if (report_type == HID_OUTPUT_REPORT) {
- return hidp_output_report(hid, data, count);
- } else if (report_type != HID_FEATURE_REPORT) {
- return -EINVAL;
- }
-
- return hidp_set_raw_report(hid, data[0], data, count, report_type);
-}
-
static int hidp_raw_request(struct hid_device *hid, unsigned char reportnum,
__u8 *buf, size_t len, unsigned char rtype,
int reqtype)
del_timer(&session->timer);
}
+static void hidp_process_report(struct hidp_session *session,
+ int type, const u8 *data, int len, int intr)
+{
+ if (len > HID_MAX_BUFFER_SIZE)
+ len = HID_MAX_BUFFER_SIZE;
+
+ memcpy(session->input_buf, data, len);
+ hid_input_report(session->hid, type, session->input_buf, len, intr);
+}
+
static void hidp_process_handshake(struct hidp_session *session,
unsigned char param)
{
hidp_input_report(session, skb);
if (session->hid)
- hid_input_report(session->hid, HID_INPUT_REPORT, skb->data, skb->len, 0);
+ hidp_process_report(session, HID_INPUT_REPORT,
+ skb->data, skb->len, 0);
break;
case HIDP_DATA_RTYPE_OTHER:
hidp_input_report(session, skb);
if (session->hid) {
- hid_input_report(session->hid, HID_INPUT_REPORT, skb->data, skb->len, 1);
+ hidp_process_report(session, HID_INPUT_REPORT,
+ skb->data, skb->len, 1);
BT_DBG("report len %d", skb->len);
}
} else {
snprintf(hid->phys, sizeof(hid->phys), "%pMR",
&l2cap_pi(session->ctrl_sock->sk)->chan->src);
+ /* NOTE: Some device modules depend on the dst address being stored in
+ * uniq. Please be aware of this before making changes to this behavior.
+ */
snprintf(hid->uniq, sizeof(hid->uniq), "%pMR",
&l2cap_pi(session->ctrl_sock->sk)->chan->dst);
hid->dev.parent = &session->conn->hcon->dev;
hid->ll_driver = &hidp_hid_driver;
- hid->hid_output_raw_report = hidp_output_raw_report;
-
/* True if device is blacklisted in drivers/hid/hid-core.c */
if (hid_ignore(hid)) {
hid_destroy_device(session->hid);
#define __HIDP_H
#include <linux/types.h>
+#include <linux/hid.h>
#include <linux/kref.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/l2cap.h>
/* Used in hidp_output_raw_report() */
int output_report_success; /* boolean */
+
+ /* temporary input buffer */
+ u8 input_buf[HID_MAX_BUFFER_SIZE];
};
/* HIDP init defines */