]> git.proxmox.com Git - mirror_ubuntu-eoan-kernel.git/commitdiff
USB: spcp8x5: reimplement using generic framework
authorJohan Hovold <jhovold@gmail.com>
Sat, 15 May 2010 15:53:47 +0000 (17:53 +0200)
committerGreg Kroah-Hartman <gregkh@suse.de>
Thu, 20 May 2010 20:21:48 +0000 (13:21 -0700)
Kill custom fifo, read, and single-urb write implementations.

Compile-only tested.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/usb/serial/spcp8x5.c

index 2ea32c561d02ef933ae47658ba7780c52918c80e..329d311a35d9b1ef9d10e3ac96924c450fd1c4bb 100644 (file)
@@ -1,6 +1,7 @@
 /*
  * spcp8x5 USB to serial adaptor driver
  *
+ * Copyright (C) 2010 Johan Hovold (jhovold@gmail.com)
  * Copyright (C) 2006 Linxb (xubin.lin@worldplus.com.cn)
  * Copyright (C) 2006 S1 Corp.
  *
@@ -29,7 +30,7 @@
 
 
 /* Version Information */
-#define DRIVER_VERSION         "v0.04"
+#define DRIVER_VERSION "v0.10"
 #define DRIVER_DESC    "SPCP8x5 USB to serial adaptor driver"
 
 static int debug;
@@ -64,11 +65,6 @@ struct spcp8x5_usb_ctrl_arg {
        u16     length;
 };
 
-/* wait 30s before close */
-#define SPCP8x5_CLOSING_WAIT   (30*HZ)
-
-#define SPCP8x5_BUF_SIZE       1024
-
 
 /* spcp8x5 spec register define */
 #define MCR_CONTROL_LINE_RTS           0x02
@@ -155,133 +151,6 @@ enum spcp8x5_type {
        SPCP835_TYPE,
 };
 
-/* 1st in 1st out buffer 4 driver */
-struct ringbuf {
-       unsigned int    buf_size;
-       char            *buf_buf;
-       char            *buf_get;
-       char            *buf_put;
-};
-
-/* alloc the ring buf and alloc the buffer itself */
-static inline struct ringbuf *alloc_ringbuf(unsigned int size)
-{
-       struct ringbuf *pb;
-
-       if (size == 0)
-               return NULL;
-
-       pb = kmalloc(sizeof(*pb), GFP_KERNEL);
-       if (pb == NULL)
-               return NULL;
-
-       pb->buf_buf = kmalloc(size, GFP_KERNEL);
-       if (pb->buf_buf == NULL) {
-               kfree(pb);
-               return NULL;
-       }
-
-       pb->buf_size = size;
-       pb->buf_get = pb->buf_put = pb->buf_buf;
-
-       return pb;
-}
-
-/* free the ring buf and the buffer itself */
-static inline void free_ringbuf(struct ringbuf *pb)
-{
-       if (pb != NULL) {
-               kfree(pb->buf_buf);
-               kfree(pb);
-       }
-}
-
-/* clear pipo , juest repoint the pointer here */
-static inline void clear_ringbuf(struct ringbuf *pb)
-{
-       if (pb != NULL)
-               pb->buf_get = pb->buf_put;
-}
-
-/* get the number of data in the pipo */
-static inline unsigned int ringbuf_avail_data(struct ringbuf *pb)
-{
-       if (pb == NULL)
-               return 0;
-       return (pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size;
-}
-
-/* get the number of space in the pipo */
-static inline unsigned int ringbuf_avail_space(struct ringbuf *pb)
-{
-       if (pb == NULL)
-               return 0;
-       return (pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size;
-}
-
-/* put count data into pipo */
-static unsigned int put_ringbuf(struct ringbuf *pb, const char *buf,
-                               unsigned int count)
-{
-       unsigned int len;
-
-       if (pb == NULL)
-               return 0;
-
-       len  = ringbuf_avail_space(pb);
-       if (count > len)
-               count = len;
-
-       if (count == 0)
-               return 0;
-
-       len = pb->buf_buf + pb->buf_size - pb->buf_put;
-       if (count > len) {
-               memcpy(pb->buf_put, buf, len);
-               memcpy(pb->buf_buf, buf+len, count - len);
-               pb->buf_put = pb->buf_buf + count - len;
-       } else {
-               memcpy(pb->buf_put, buf, count);
-               if (count < len)
-                       pb->buf_put += count;
-               else /* count == len */
-                       pb->buf_put = pb->buf_buf;
-       }
-       return count;
-}
-
-/* get count data from pipo */
-static unsigned int get_ringbuf(struct ringbuf *pb, char *buf,
-                               unsigned int count)
-{
-       unsigned int len;
-
-       if (pb == NULL || buf == NULL)
-               return 0;
-
-       len = ringbuf_avail_data(pb);
-       if (count > len)
-               count = len;
-
-       if (count == 0)
-               return 0;
-
-       len = pb->buf_buf + pb->buf_size - pb->buf_get;
-       if (count > len) {
-               memcpy(buf, pb->buf_get, len);
-               memcpy(buf+len, pb->buf_buf, count - len);
-               pb->buf_get = pb->buf_buf + count - len;
-       } else {
-               memcpy(buf, pb->buf_get, count);
-               if (count < len)
-                       pb->buf_get += count;
-               else /* count == len */
-                       pb->buf_get = pb->buf_buf;
-       }
-
-       return count;
-}
-
 static struct usb_driver spcp8x5_driver = {
        .name =                 "spcp8x5",
        .probe =                usb_serial_probe,
@@ -293,8 +162,6 @@ static struct usb_driver spcp8x5_driver = {
 
 struct spcp8x5_private {
        spinlock_t      lock;
-       struct ringbuf  *buf;
-       int             write_urb_in_use;
        enum spcp8x5_type       type;
        wait_queue_head_t       delta_msr_wait;
        u8                      line_control;
@@ -330,24 +197,15 @@ static int spcp8x5_startup(struct usb_serial *serial)
                        goto cleanup;
 
                spin_lock_init(&priv->lock);
-               priv->buf = alloc_ringbuf(SPCP8x5_BUF_SIZE);
-               if (priv->buf == NULL)
-                       goto cleanup2;
-
                init_waitqueue_head(&priv->delta_msr_wait);
                priv->type = type;
                usb_set_serial_port_data(serial->port[i] , priv);
-
        }
 
        return 0;
-
-cleanup2:
-       kfree(priv);
 cleanup:
        for (--i; i >= 0; --i) {
                priv = usb_get_serial_port_data(serial->port[i]);
-               free_ringbuf(priv->buf);
                kfree(priv);
                usb_set_serial_port_data(serial->port[i] , NULL);
        }
@@ -358,15 +216,9 @@ cleanup:
 static void spcp8x5_release(struct usb_serial *serial)
 {
        int i;
-       struct spcp8x5_private *priv;
 
-       for (i = 0; i < serial->num_ports; i++) {
-               priv = usb_get_serial_port_data(serial->port[i]);
-               if (priv) {
-                       free_ringbuf(priv->buf);
-                       kfree(priv);
-               }
-       }
+       for (i = 0; i < serial->num_ports; i++)
+               kfree(usb_get_serial_port_data(serial->port[i]));
 }
 
 /* set the modem control line of the device.
@@ -470,33 +322,6 @@ static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on)
        spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type);
 }
 
-/* close the serial port. We should wait for data sending to device 1st and
- * then kill all urb. */
-static void spcp8x5_close(struct usb_serial_port *port)
-{
-       struct spcp8x5_private *priv = usb_get_serial_port_data(port);
-       unsigned long flags;
-       int result;
-
-       dbg("%s - port %d", __func__, port->number);
-
-       spin_lock_irqsave(&priv->lock, flags);
-       /* clear out any remaining data in the buffer */
-       clear_ringbuf(priv->buf);
-       spin_unlock_irqrestore(&priv->lock, flags);
-
-       /* kill urb */
-       if (port->write_urb != NULL) {
-               result = usb_unlink_urb(port->write_urb);
-               if (result)
-                       dev_dbg(&port->dev,
-                               "usb_unlink_urb(write_urb) = %d\n", result);
-       }
-       result = usb_unlink_urb(port->read_urb);
-       if (result)
-               dev_dbg(&port->dev, "usb_unlink_urb(read_urb) = %d\n", result);
-}
-
 static void spcp8x5_init_termios(struct tty_struct *tty)
 {
        /* for the 1st time call this function */
@@ -620,7 +445,7 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
 }
 
 /* open the serial port. do some usb system call. set termios and get the line
- * status of the device. then submit the read urb */
+ * status of the device. */
 static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
        struct ktermios tmp_termios;
@@ -655,52 +480,21 @@ static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port)
        priv->line_status = status & 0xf0 ;
        spin_unlock_irqrestore(&priv->lock, flags);
 
-       dbg("%s - submitting read urb", __func__);
-       port->read_urb->dev = serial->dev;
-       ret = usb_submit_urb(port->read_urb, GFP_KERNEL);
-       if (ret) {
-               spcp8x5_close(port);
-               return -EPROTO;
-       }
        port->port.drain_delay = 256;
-       return 0;
+
+       return usb_serial_generic_open(tty, port);
 }
 
-/* bulk read call back function. check the status of the urb. if transfer
- * failed return. then update the status and the tty send data to tty subsys.
- * submit urb again.
- */
-static void spcp8x5_read_bulk_callback(struct urb *urb)
+static void spcp8x5_process_read_urb(struct urb *urb)
 {
        struct usb_serial_port *port = urb->context;
        struct spcp8x5_private *priv = usb_get_serial_port_data(port);
        struct tty_struct *tty;
        unsigned char *data = urb->transfer_buffer;
        unsigned long flags;
-       int result = urb->status;
        u8 status;
        char tty_flag;
 
-       dev_dbg(&port->dev, "start, result = %d, urb->actual_length = %d\n,",
-               result, urb->actual_length);
-
-       /* check the urb status */
-       if (result) {
-               if (result == -EPROTO) {
-                       /* spcp8x5 mysteriously fails with -EPROTO */
-                       /* reschedule the read */
-                       urb->dev = port->serial->dev;
-                       result = usb_submit_urb(urb , GFP_ATOMIC);
-                       if (result)
-                               dev_dbg(&port->dev,
-                                       "failed submitting read urb %d\n",
-                                       result);
-                       return;
-               }
-               dev_dbg(&port->dev, "unable to handle the error, exiting.\n");
-               return;
-       }
-
        /* get tty_flag from status */
        tty_flag = TTY_NORMAL;
 
@@ -711,141 +505,33 @@ static void spcp8x5_read_bulk_callback(struct urb *urb)
        /* wake up the wait for termios */
        wake_up_interruptible(&priv->delta_msr_wait);
 
-       /* break takes precedence over parity, which takes precedence over
-        * framing errors */
-       if (status & UART_BREAK_ERROR)
-               tty_flag = TTY_BREAK;
-       else if (status & UART_PARITY_ERROR)
-               tty_flag = TTY_PARITY;
-       else if (status & UART_FRAME_ERROR)
-               tty_flag = TTY_FRAME;
-       dev_dbg(&port->dev, "tty_flag = %d\n", tty_flag);
-
-       tty = tty_port_tty_get(&port->port);
-       if (tty && urb->actual_length) {
-               /* overrun is special, not associated with a char */
-               if (status & UART_OVERRUN_ERROR)
-                       tty_insert_flip_char(tty, 0, TTY_OVERRUN);
-               tty_insert_flip_string_fixed_flag(tty, data, tty_flag,
-                                                       urb->actual_length);
-               tty_flip_buffer_push(tty);
-       }
-       tty_kref_put(tty);
-
-       /* Schedule the next read */
-       urb->dev = port->serial->dev;
-       result = usb_submit_urb(urb , GFP_ATOMIC);
-       if (result)
-               dev_dbg(&port->dev, "failed submitting read urb %d\n", result);
-}
-
-/* get data from ring buffer and then write to usb bus */
-static void spcp8x5_send(struct usb_serial_port *port)
-{
-       int count, result;
-       struct spcp8x5_private *priv = usb_get_serial_port_data(port);
-       unsigned long flags;
-
-       spin_lock_irqsave(&priv->lock, flags);
-
-       if (priv->write_urb_in_use) {
-               dev_dbg(&port->dev, "write urb still used\n");
-               spin_unlock_irqrestore(&priv->lock, flags);
+       if (!urb->actual_length)
                return;
-       }
-
-       /* send the 1st urb for writting */
-       memset(port->write_urb->transfer_buffer , 0x00 , port->bulk_out_size);
-       count = get_ringbuf(priv->buf, port->write_urb->transfer_buffer,
-               port->bulk_out_size);
 
-       if (count == 0) {
-               spin_unlock_irqrestore(&priv->lock, flags);
+       tty = tty_port_tty_get(&port->port);
+       if (!tty)
                return;
-       }
-
-       /* update the urb status */
-       priv->write_urb_in_use = 1;
-
-       spin_unlock_irqrestore(&priv->lock, flags);
-
-       port->write_urb->transfer_buffer_length = count;
-       port->write_urb->dev = port->serial->dev;
-
-       result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
-       if (result) {
-               dev_dbg(&port->dev, "failed submitting write urb, error %d\n",
-                       result);
-               priv->write_urb_in_use = 0;
-               /* TODO: reschedule spcp8x5_send */
-       }
-
-
-       schedule_work(&port->work);
-}
 
-/* this is the call back function for write urb. NOTE we should not sleep in
- * this routine. check the urb return code and then submit the write urb again
- * to hold the write loop */
-static void spcp8x5_write_bulk_callback(struct urb *urb)
-{
-       struct usb_serial_port *port = urb->context;
-       struct spcp8x5_private *priv = usb_get_serial_port_data(port);
-       int result;
-       int status = urb->status;
+       if (status & UART_STATE_TRANSIENT_MASK) {
+               /* break takes precedence over parity, which takes precedence
+                * over framing errors */
+               if (status & UART_BREAK_ERROR)
+                       tty_flag = TTY_BREAK;
+               else if (status & UART_PARITY_ERROR)
+                       tty_flag = TTY_PARITY;
+               else if (status & UART_FRAME_ERROR)
+                       tty_flag = TTY_FRAME;
+               dev_dbg(&port->dev, "tty_flag = %d\n", tty_flag);
 
-       switch (status) {
-       case 0:
-               /* success */
-               break;
-       case -ECONNRESET:
-       case -ENOENT:
-       case -ESHUTDOWN:
-               /* this urb is terminated, clean up */
-               dev_dbg(&port->dev, "urb shutting down with status: %d\n",
-                       status);
-               priv->write_urb_in_use = 0;
-               return;
-       default:
-               /* error in the urb, so we have to resubmit it */
-               dbg("%s - Overflow in write", __func__);
-               dbg("%s - nonzero write bulk status received: %d",
-                       __func__, status);
-               port->write_urb->transfer_buffer_length = 1;
-               port->write_urb->dev = port->serial->dev;
-               result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
-               if (result)
-                       dev_dbg(&port->dev,
-                               "failed resubmitting write urb %d\n", result);
-               else
-                       return;
+               /* overrun is special, not associated with a char */
+               if (status & UART_OVERRUN_ERROR)
+                       tty_insert_flip_char(tty, 0, TTY_OVERRUN);
        }
 
-       priv->write_urb_in_use = 0;
-
-       /* send any buffered data */
-       spcp8x5_send(port);
-}
-
-/* write data to ring buffer. and then start the write transfer */
-static int spcp8x5_write(struct tty_struct *tty, struct usb_serial_port *port,
-                        const unsigned char *buf, int count)
-{
-       struct spcp8x5_private *priv = usb_get_serial_port_data(port);
-       unsigned long flags;
-
-       dev_dbg(&port->dev, "%d bytes\n", count);
-
-       if (!count)
-               return count;
-
-       spin_lock_irqsave(&priv->lock, flags);
-       count = put_ringbuf(priv->buf, buf, count);
-       spin_unlock_irqrestore(&priv->lock, flags);
-
-       spcp8x5_send(port);
-
-       return count;
+       tty_insert_flip_string_fixed_flag(tty, data, tty_flag,
+                                                       urb->actual_length);
+       tty_flip_buffer_push(tty);
+       tty_kref_put(tty);
 }
 
 static int spcp8x5_wait_modem_info(struct usb_serial_port *port,
@@ -953,36 +639,6 @@ static int spcp8x5_tiocmget(struct tty_struct *tty, struct file *file)
        return result;
 }
 
-/* get the avail space room in ring buffer */
-static int spcp8x5_write_room(struct tty_struct *tty)
-{
-       struct usb_serial_port *port = tty->driver_data;
-       struct spcp8x5_private *priv = usb_get_serial_port_data(port);
-       int room = 0;
-       unsigned long flags;
-
-       spin_lock_irqsave(&priv->lock, flags);
-       room = ringbuf_avail_space(priv->buf);
-       spin_unlock_irqrestore(&priv->lock, flags);
-
-       return room;
-}
-
-/* get the number of avail data in write ring buffer */
-static int spcp8x5_chars_in_buffer(struct tty_struct *tty)
-{
-       struct usb_serial_port *port = tty->driver_data;
-       struct spcp8x5_private *priv = usb_get_serial_port_data(port);
-       int chars = 0;
-       unsigned long flags;
-
-       spin_lock_irqsave(&priv->lock, flags);
-       chars = ringbuf_avail_data(priv->buf);
-       spin_unlock_irqrestore(&priv->lock, flags);
-
-       return chars;
-}
-
 /* All of the device info needed for the spcp8x5 SIO serial converter */
 static struct usb_serial_driver spcp8x5_device = {
        .driver = {
@@ -992,21 +648,16 @@ static struct usb_serial_driver spcp8x5_device = {
        .id_table               = id_table,
        .num_ports              = 1,
        .open                   = spcp8x5_open,
-       .close                  = spcp8x5_close,
        .dtr_rts                = spcp8x5_dtr_rts,
        .carrier_raised         = spcp8x5_carrier_raised,
-       .write                  = spcp8x5_write,
        .set_termios            = spcp8x5_set_termios,
        .init_termios           = spcp8x5_init_termios,
        .ioctl                  = spcp8x5_ioctl,
        .tiocmget               = spcp8x5_tiocmget,
        .tiocmset               = spcp8x5_tiocmset,
-       .write_room             = spcp8x5_write_room,
-       .read_bulk_callback     = spcp8x5_read_bulk_callback,
-       .write_bulk_callback    = spcp8x5_write_bulk_callback,
-       .chars_in_buffer        = spcp8x5_chars_in_buffer,
        .attach                 = spcp8x5_startup,
        .release                = spcp8x5_release,
+       .process_read_urb       = spcp8x5_process_read_urb,
 };
 
 static int __init spcp8x5_init(void)