DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC, pcie_rootport_aspm_quirk );
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC1, pcie_rootport_aspm_quirk );
+/*
+ * Fixup to mark boot BIOS video selected by BIOS before it changes
+ *
+ * From information provided by "Jon Smirl" <jonsmirl@gmail.com>
+ *
+ * The standard boot ROM sequence for an x86 machine uses the BIOS
+ * to select an initial video card for boot display. This boot video
+ * card will have it's BIOS copied to C0000 in system RAM.
+ * IORESOURCE_ROM_SHADOW is used to associate the boot video
+ * card with this copy. On laptops this copy has to be used since
+ * the main ROM may be compressed or combined with another image.
+ * See pci_map_rom() for use of this flag. IORESOURCE_ROM_SHADOW
+ * is marked here since the boot video device will be the only enabled
+ * video device at this point.
+ */
+
+static void __devinit pci_fixup_video(struct pci_dev *pdev)
+{
+ struct pci_dev *bridge;
+ struct pci_bus *bus;
+ u16 config;
+
+ if ((pdev->class >> 8) != PCI_CLASS_DISPLAY_VGA)
+ return;
+
+ /* Is VGA routed to us? */
+ bus = pdev->bus;
+ while (bus) {
+ bridge = bus->self;
+
+ /*
+ * From information provided by
+ * "David Miller" <davem@davemloft.net>
+ * The bridge control register is valid for PCI header
+ * type BRIDGE, or CARDBUS. Host to PCI controllers use
+ * PCI header type NORMAL.
+ */
+ if (bridge
+ &&((bridge->hdr_type == PCI_HEADER_TYPE_BRIDGE)
+ ||(bridge->hdr_type == PCI_HEADER_TYPE_CARDBUS))) {
+ pci_read_config_word(bridge, PCI_BRIDGE_CONTROL,
+ &config);
+ if (!(config & PCI_BRIDGE_CTL_VGA))
+ return;
+ }
+ bus = bus->parent;
+ }
+ pci_read_config_word(pdev, PCI_COMMAND, &config);
+ if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
+ pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
+ printk(KERN_DEBUG "Boot video device is %s\n", pci_name(pdev));
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video);
+
/*
* Some Toshiba laptops need extra code to enable their TI TSB43AB22/A.
*
#
# Makefile for the ia64-specific parts of the pci bus
#
-obj-y := pci.o
+obj-y := pci.o fixup.o
--- /dev/null
+/*
+ * Exceptions for specific devices. Usually work-arounds for fatal design flaws.
+ * Derived from fixup.c of i386 tree.
+ */
+
+#include <linux/pci.h>
+#include <linux/init.h>
+
+#include <asm/machvec.h>
+
+/*
+ * Fixup to mark boot BIOS video selected by BIOS before it changes
+ *
+ * From information provided by "Jon Smirl" <jonsmirl@gmail.com>
+ *
+ * The standard boot ROM sequence for an x86 machine uses the BIOS
+ * to select an initial video card for boot display. This boot video
+ * card will have it's BIOS copied to C0000 in system RAM.
+ * IORESOURCE_ROM_SHADOW is used to associate the boot video
+ * card with this copy. On laptops this copy has to be used since
+ * the main ROM may be compressed or combined with another image.
+ * See pci_map_rom() for use of this flag. IORESOURCE_ROM_SHADOW
+ * is marked here since the boot video device will be the only enabled
+ * video device at this point.
+ */
+
+static void __devinit pci_fixup_video(struct pci_dev *pdev)
+{
+ struct pci_dev *bridge;
+ struct pci_bus *bus;
+ u16 config;
+
+ if ((strcmp(platform_name, "dig") != 0)
+ && (strcmp(platform_name, "hpzx1") != 0))
+ return;
+ /* Maybe, this machine supports legacy memory map. */
+
+ if ((pdev->class >> 8) != PCI_CLASS_DISPLAY_VGA)
+ return;
+
+ /* Is VGA routed to us? */
+ bus = pdev->bus;
+ while (bus) {
+ bridge = bus->self;
+
+ /*
+ * From information provided by
+ * "David Miller" <davem@davemloft.net>
+ * The bridge control register is valid for PCI header
+ * type BRIDGE, or CARDBUS. Host to PCI controllers use
+ * PCI header type NORMAL.
+ */
+ if (bridge
+ &&((bridge->hdr_type == PCI_HEADER_TYPE_BRIDGE)
+ ||(bridge->hdr_type == PCI_HEADER_TYPE_CARDBUS))) {
+ pci_read_config_word(bridge, PCI_BRIDGE_CONTROL,
+ &config);
+ if (!(config & PCI_BRIDGE_CTL_VGA))
+ return;
+ }
+ bus = bus->parent;
+ }
+ pci_read_config_word(pdev, PCI_COMMAND, &config);
+ if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
+ pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
+ printk(KERN_DEBUG "Boot video device is %s\n", pci_name(pdev));
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video);
pci_mmcfg_virt = kmalloc(sizeof(*pci_mmcfg_virt) * pci_mmcfg_config_num, GFP_KERNEL);
if (pci_mmcfg_virt == NULL) {
- printk("PCI: Can not allocate memory for mmconfig structures\n");
+ printk(KERN_ERR "PCI: Can not allocate memory for mmconfig structures\n");
return;
}
for (i = 0; i < pci_mmcfg_config_num; ++i) {
pci_mmcfg_virt[i].virt = ioremap_nocache(pci_mmcfg_config[i].base_address,
MMCONFIG_APER_MAX);
if (!pci_mmcfg_virt[i].virt) {
- printk("PCI: Cannot map mmconfig aperture for segment %d\n",
+ printk(KERN_ERR "PCI: Cannot map mmconfig aperture for "
+ "segment %d\n",
pci_mmcfg_config[i].pci_segment_group_number);
return;
}
/*
- * latch closed: 1
- * latch open: 0
+ * latch open: 1
+ * latch closed: 0
*/
u8 acpiphp_get_latch_status(struct acpiphp_slot *slot)
{
sta = get_slot_status(slot);
- return (sta & ACPI_STA_SHOW_IN_UI) ? 1 : 0;
+ return (sta & ACPI_STA_SHOW_IN_UI) ? 0 : 1;
}
pci_dev->driver = NULL;
}
+ /*
+ * If the device is still on, set the power state as "unknown",
+ * since it might change by the next time we load the driver.
+ */
+ if (pci_dev->current_state == PCI_D0)
+ pci_dev->current_state = PCI_UNKNOWN;
+
/*
* We would love to complain here if pci_dev->is_enabled is set, that
* the driver should have called pci_disable_device(), but the
suspend_report_result(drv->suspend, i);
} else {
pci_save_state(pci_dev);
+ /*
+ * mark its power state as "unknown", since we don't know if
+ * e.g. the BIOS will change its device state when we suspend.
+ */
+ if (pci_dev->current_state == PCI_D0)
+ pci_dev->current_state = PCI_UNKNOWN;
}
return i;
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_vt82c598_id );
-#ifdef CONFIG_ACPI_SLEEP
-
-/*
- * Some VIA systems boot with the abnormal status flag set. This can cause
- * the BIOS to re-POST the system on resume rather than passing control
- * back to the OS. Clear the flag on boot
- */
-static void __devinit quirk_via_abnormal_poweroff(struct pci_dev *dev)
-{
- u32 reg;
-
- acpi_hw_register_read(ACPI_MTX_DO_NOT_LOCK, ACPI_REGISTER_PM1_STATUS,
- ®);
-
- if (reg & 0x800) {
- printk("Clearing abnormal poweroff flag\n");
- acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK,
- ACPI_REGISTER_PM1_STATUS,
- (u16)0x800);
- }
-}
-
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_via_abnormal_poweroff);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_abnormal_poweroff);
-
-#endif
-
/*
* CardBus controllers have a legacy base address that enables them
* to respond as i82365 pcmcia controllers. We don't want them to
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810);
-/*
- * Fixup to mark boot BIOS video selected by BIOS before it changes
- *
- * From information provided by "Jon Smirl" <jonsmirl@gmail.com>
- *
- * The standard boot ROM sequence for an x86 machine uses the BIOS
- * to select an initial video card for boot display. This boot video
- * card will have it's BIOS copied to C0000 in system RAM.
- * IORESOURCE_ROM_SHADOW is used to associate the boot video
- * card with this copy. On laptops this copy has to be used since
- * the main ROM may be compressed or combined with another image.
- * See pci_map_rom() for use of this flag. IORESOURCE_ROM_SHADOW
- * is marked here since the boot video device will be the only enabled
- * video device at this point.
- */
-
-static void __devinit fixup_video(struct pci_dev *pdev)
-{
- struct pci_dev *bridge;
- struct pci_bus *bus;
- u16 config;
-
- if ((pdev->class >> 8) != PCI_CLASS_DISPLAY_VGA)
- return;
-
- /* Is VGA routed to us? */
- bus = pdev->bus;
- while (bus) {
- bridge = bus->self;
- if (bridge) {
- pci_read_config_word(bridge, PCI_BRIDGE_CONTROL,
- &config);
- if (!(config & PCI_BRIDGE_CTL_VGA))
- return;
- }
- bus = bus->parent;
- }
- pci_read_config_word(pdev, PCI_COMMAND, &config);
- if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
- pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
- printk(KERN_DEBUG "Boot video device is %s\n", pci_name(pdev));
- }
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, fixup_video);
-
-
static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end)
{
while (f < end) {
int last_image;
/*
- * IORESOURCE_ROM_SHADOW set if the VGA enable bit of the Bridge Control
- * register is set for embedded VGA.
+ * IORESOURCE_ROM_SHADOW set on x86, x86_64 and IA64 supports legacy
+ * memory map if the VGA enable bit of the Bridge Control register is
+ * set for embedded VGA.
*/
if (res->flags & IORESOURCE_ROM_SHADOW) {
/* primary video rom always starts here */
projects / mirror_ubuntu-zesty-kernel.git / commitdiff