]> git.proxmox.com Git - mirror_ubuntu-zesty-kernel.git/commitdiff
Merge tag 'tty-3.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
authorLinus Torvalds <torvalds@linux-foundation.org>
Fri, 14 Sep 2012 21:54:29 +0000 (14:54 -0700)
committerLinus Torvalds <torvalds@linux-foundation.org>
Fri, 14 Sep 2012 21:54:29 +0000 (14:54 -0700)
Pull TTY fixes from Greg Kroah-Hartman:
 "Here are 2 tiny patches for a serial driver to resolve issues that
  people have reported with the 3.6-rc tree.

  Both of these have been in the linux-next tree for a while now.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'tty-3.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: serial: imx: don't reinit clock in imx_setup_ufcr()
  tty: serial: imx: console write routing is unsafe on SMP

drivers/tty/serial/imx.c

index d5c689d6217e3a2eb46223fa1ffd01b77e15e0df..e309e8b0aaba0c10f0e45d72c57480000ed43d6b 100644 (file)
 #define  UCR4_OREN      (1<<1)  /* Receiver overrun interrupt enable */
 #define  UCR4_DREN      (1<<0)  /* Recv data ready interrupt enable */
 #define  UFCR_RXTL_SHF   0       /* Receiver trigger level shift */
+#define  UFCR_DCEDTE    (1<<6)  /* DCE/DTE mode select */
 #define  UFCR_RFDIV      (7<<7)  /* Reference freq divider mask */
 #define  UFCR_RFDIV_REG(x)     (((x) < 7 ? 6 - (x) : 6) << 7)
 #define  UFCR_TXTL_SHF   10      /* Transmitter trigger level shift */
@@ -667,22 +668,11 @@ static void imx_break_ctl(struct uart_port *port, int break_state)
 static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode)
 {
        unsigned int val;
-       unsigned int ufcr_rfdiv;
-
-       /* set receiver / transmitter trigger level.
-        * RFDIV is set such way to satisfy requested uartclk value
-        */
-       val = TXTL << 10 | RXTL;
-       ufcr_rfdiv = (clk_get_rate(sport->clk_per) + sport->port.uartclk / 2)
-                       / sport->port.uartclk;
-
-       if(!ufcr_rfdiv)
-               ufcr_rfdiv = 1;
-
-       val |= UFCR_RFDIV_REG(ufcr_rfdiv);
 
+       /* set receiver / transmitter trigger level */
+       val = readl(sport->port.membase + UFCR) & (UFCR_RFDIV | UFCR_DCEDTE);
+       val |= TXTL << UFCR_TXTL_SHF | RXTL;
        writel(val, sport->port.membase + UFCR);
-
        return 0;
 }
 
@@ -754,6 +744,7 @@ static int imx_startup(struct uart_port *port)
                }
        }
 
+       spin_lock_irqsave(&sport->port.lock, flags);
        /*
         * Finally, clear and enable interrupts
         */
@@ -807,7 +798,6 @@ static int imx_startup(struct uart_port *port)
        /*
         * Enable modem status interrupts
         */
-       spin_lock_irqsave(&sport->port.lock,flags);
        imx_enable_ms(&sport->port);
        spin_unlock_irqrestore(&sport->port.lock,flags);
 
@@ -837,10 +827,13 @@ static void imx_shutdown(struct uart_port *port)
 {
        struct imx_port *sport = (struct imx_port *)port;
        unsigned long temp;
+       unsigned long flags;
 
+       spin_lock_irqsave(&sport->port.lock, flags);
        temp = readl(sport->port.membase + UCR2);
        temp &= ~(UCR2_TXEN);
        writel(temp, sport->port.membase + UCR2);
+       spin_unlock_irqrestore(&sport->port.lock, flags);
 
        if (USE_IRDA(sport)) {
                struct imxuart_platform_data *pdata;
@@ -869,12 +862,14 @@ static void imx_shutdown(struct uart_port *port)
         * Disable all interrupts, port and break condition.
         */
 
+       spin_lock_irqsave(&sport->port.lock, flags);
        temp = readl(sport->port.membase + UCR1);
        temp &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN);
        if (USE_IRDA(sport))
                temp &= ~(UCR1_IREN);
 
        writel(temp, sport->port.membase + UCR1);
+       spin_unlock_irqrestore(&sport->port.lock, flags);
 }
 
 static void
@@ -1217,6 +1212,9 @@ imx_console_write(struct console *co, const char *s, unsigned int count)
        struct imx_port *sport = imx_ports[co->index];
        struct imx_port_ucrs old_ucr;
        unsigned int ucr1;
+       unsigned long flags;
+
+       spin_lock_irqsave(&sport->port.lock, flags);
 
        /*
         *      First, save UCR1/2/3 and then disable interrupts
@@ -1242,6 +1240,8 @@ imx_console_write(struct console *co, const char *s, unsigned int count)
        while (!(readl(sport->port.membase + USR2) & USR2_TXDC));
 
        imx_port_ucrs_restore(&sport->port, &old_ucr);
+
+       spin_unlock_irqrestore(&sport->port.lock, flags);
 }
 
 /*