int dib0700_get_version(struct dvb_usb_device *d, u32 *hwversion,
u32 *romversion, u32 *ramversion, u32 *fwtype)
{
- u8 b[16];
- int ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0),
+ struct dib0700_state *st = d->priv;
+ int ret;
+
+ ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0),
REQUEST_GET_VERSION,
USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
- b, sizeof(b), USB_CTRL_GET_TIMEOUT);
+ st->buf, 16, USB_CTRL_GET_TIMEOUT);
if (hwversion != NULL)
- *hwversion = (b[0] << 24) | (b[1] << 16) | (b[2] << 8) | b[3];
+ *hwversion = (st->buf[0] << 24) | (st->buf[1] << 16) |
+ (st->buf[2] << 8) | st->buf[3];
if (romversion != NULL)
- *romversion = (b[4] << 24) | (b[5] << 16) | (b[6] << 8) | b[7];
+ *romversion = (st->buf[4] << 24) | (st->buf[5] << 16) |
+ (st->buf[6] << 8) | st->buf[7];
if (ramversion != NULL)
- *ramversion = (b[8] << 24) | (b[9] << 16) | (b[10] << 8) | b[11];
+ *ramversion = (st->buf[8] << 24) | (st->buf[9] << 16) |
+ (st->buf[10] << 8) | st->buf[11];
if (fwtype != NULL)
- *fwtype = (b[12] << 24) | (b[13] << 16) | (b[14] << 8) | b[15];
+ *fwtype = (st->buf[12] << 24) | (st->buf[13] << 16) |
+ (st->buf[14] << 8) | st->buf[15];
return ret;
}
int dib0700_set_gpio(struct dvb_usb_device *d, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val)
{
- u8 buf[3] = { REQUEST_SET_GPIO, gpio, ((gpio_dir & 0x01) << 7) | ((gpio_val & 0x01) << 6) };
- return dib0700_ctrl_wr(d, buf, sizeof(buf));
+ struct dib0700_state *st = d->priv;
+ s16 ret;
+
+ st->buf[0] = REQUEST_SET_GPIO;
+ st->buf[1] = gpio;
+ st->buf[2] = ((gpio_dir & 0x01) << 7) | ((gpio_val & 0x01) << 6);
+
+ ret = dib0700_ctrl_wr(d, st->buf, 3);
+
+ return ret;
}
static int dib0700_set_usb_xfer_len(struct dvb_usb_device *d, u16 nb_ts_packets)
{
struct dib0700_state *st = d->priv;
- u8 b[3];
int ret;
if (st->fw_version >= 0x10201) {
- b[0] = REQUEST_SET_USB_XFER_LEN;
- b[1] = (nb_ts_packets >> 8) & 0xff;
- b[2] = nb_ts_packets & 0xff;
+ st->buf[0] = REQUEST_SET_USB_XFER_LEN;
+ st->buf[1] = (nb_ts_packets >> 8) & 0xff;
+ st->buf[2] = nb_ts_packets & 0xff;
deb_info("set the USB xfer len to %i Ts packet\n", nb_ts_packets);
- ret = dib0700_ctrl_wr(d, b, sizeof(b));
+ ret = dib0700_ctrl_wr(d, st->buf, 3);
} else {
deb_info("this firmware does not allow to change the USB xfer len\n");
ret = -EIO;
properly support i2c read calls not preceded by a write */
struct dvb_usb_device *d = i2c_get_adapdata(adap);
+ struct dib0700_state *st = d->priv;
uint8_t bus_mode = 1; /* 0=eeprom bus, 1=frontend bus */
uint8_t gen_mode = 0; /* 0=master i2c, 1=gpio i2c */
uint8_t en_start = 0;
uint8_t en_stop = 0;
- uint8_t buf[255]; /* TBV: malloc ? */
int result, i;
/* Ensure nobody else hits the i2c bus while we're sending our
} else {
/* Write request */
- buf[0] = REQUEST_NEW_I2C_WRITE;
- buf[1] = msg[i].addr << 1;
- buf[2] = (en_start << 7) | (en_stop << 6) |
+ st->buf[0] = REQUEST_NEW_I2C_WRITE;
+ st->buf[1] = msg[i].addr << 1;
+ st->buf[2] = (en_start << 7) | (en_stop << 6) |
(msg[i].len & 0x3F);
/* I2C ctrl + FE bus; */
- buf[3] = ((gen_mode << 6) & 0xC0) |
+ st->buf[3] = ((gen_mode << 6) & 0xC0) |
((bus_mode << 4) & 0x30);
/* The Actual i2c payload */
- memcpy(&buf[4], msg[i].buf, msg[i].len);
+ memcpy(&st->buf[4], msg[i].buf, msg[i].len);
deb_data(">>> ");
- debug_dump(buf, msg[i].len + 4, deb_data);
+ debug_dump(st->buf, msg[i].len + 4, deb_data);
result = usb_control_msg(d->udev,
usb_sndctrlpipe(d->udev, 0),
REQUEST_NEW_I2C_WRITE,
USB_TYPE_VENDOR | USB_DIR_OUT,
- 0, 0, buf, msg[i].len + 4,
+ 0, 0, st->buf, msg[i].len + 4,
USB_CTRL_GET_TIMEOUT);
if (result < 0) {
deb_info("i2c write error (status = %d)\n", result);
struct i2c_msg *msg, int num)
{
struct dvb_usb_device *d = i2c_get_adapdata(adap);
+ struct dib0700_state *st = d->priv;
int i,len;
- u8 buf[255];
if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
return -EAGAIN;
for (i = 0; i < num; i++) {
/* fill in the address */
- buf[1] = msg[i].addr << 1;
+ st->buf[1] = msg[i].addr << 1;
/* fill the buffer */
- memcpy(&buf[2], msg[i].buf, msg[i].len);
+ memcpy(&st->buf[2], msg[i].buf, msg[i].len);
/* write/read request */
if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) {
- buf[0] = REQUEST_I2C_READ;
- buf[1] |= 1;
+ st->buf[0] = REQUEST_I2C_READ;
+ st->buf[1] |= 1;
/* special thing in the current firmware: when length is zero the read-failed */
- if ((len = dib0700_ctrl_rd(d, buf, msg[i].len + 2, msg[i+1].buf, msg[i+1].len)) <= 0) {
+ len = dib0700_ctrl_rd(d, st->buf, msg[i].len + 2,
+ msg[i+1].buf, msg[i+1].len);
+ if (len <= 0) {
deb_info("I2C read failed on address 0x%02x\n",
- msg[i].addr);
+ msg[i].addr);
break;
}
i++;
} else {
- buf[0] = REQUEST_I2C_WRITE;
- if (dib0700_ctrl_wr(d, buf, msg[i].len + 2) < 0)
+ st->buf[0] = REQUEST_I2C_WRITE;
+ if (dib0700_ctrl_wr(d, st->buf, msg[i].len + 2) < 0)
break;
}
}
-
mutex_unlock(&d->i2c_mutex);
+
return i;
}
int dib0700_identify_state(struct usb_device *udev, struct dvb_usb_device_properties *props,
struct dvb_usb_device_description **desc, int *cold)
{
- u8 b[16];
- s16 ret = usb_control_msg(udev, usb_rcvctrlpipe(udev,0),
+ s16 ret;
+ u8 *b;
+
+ b = kmalloc(16, GFP_KERNEL);
+ if (!b)
+ return -ENOMEM;
+
+
+ ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
REQUEST_GET_VERSION, USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, b, 16, USB_CTRL_GET_TIMEOUT);
deb_info("FW GET_VERSION length: %d\n",ret);
*cold = ret <= 0;
-
deb_info("cold: %d\n", *cold);
+
+ kfree(b);
return 0;
}
u8 pll_src, u8 pll_range, u8 clock_gpio3, u16 pll_prediv,
u16 pll_loopdiv, u16 free_div, u16 dsuScaler)
{
- u8 b[10];
- b[0] = REQUEST_SET_CLOCK;
- b[1] = (en_pll << 7) | (pll_src << 6) | (pll_range << 5) | (clock_gpio3 << 4);
- b[2] = (pll_prediv >> 8) & 0xff; // MSB
- b[3] = pll_prediv & 0xff; // LSB
- b[4] = (pll_loopdiv >> 8) & 0xff; // MSB
- b[5] = pll_loopdiv & 0xff; // LSB
- b[6] = (free_div >> 8) & 0xff; // MSB
- b[7] = free_div & 0xff; // LSB
- b[8] = (dsuScaler >> 8) & 0xff; // MSB
- b[9] = dsuScaler & 0xff; // LSB
-
- return dib0700_ctrl_wr(d, b, 10);
+ struct dib0700_state *st = d->priv;
+ s16 ret;
+
+ st->buf[0] = REQUEST_SET_CLOCK;
+ st->buf[1] = (en_pll << 7) | (pll_src << 6) |
+ (pll_range << 5) | (clock_gpio3 << 4);
+ st->buf[2] = (pll_prediv >> 8) & 0xff; /* MSB */
+ st->buf[3] = pll_prediv & 0xff; /* LSB */
+ st->buf[4] = (pll_loopdiv >> 8) & 0xff; /* MSB */
+ st->buf[5] = pll_loopdiv & 0xff; /* LSB */
+ st->buf[6] = (free_div >> 8) & 0xff; /* MSB */
+ st->buf[7] = free_div & 0xff; /* LSB */
+ st->buf[8] = (dsuScaler >> 8) & 0xff; /* MSB */
+ st->buf[9] = dsuScaler & 0xff; /* LSB */
+
+ ret = dib0700_ctrl_wr(d, st->buf, 10);
+
+ return ret;
}
int dib0700_set_i2c_speed(struct dvb_usb_device *d, u16 scl_kHz)
{
+ struct dib0700_state *st = d->priv;
u16 divider;
- u8 b[8];
if (scl_kHz == 0)
return -EINVAL;
- b[0] = REQUEST_SET_I2C_PARAM;
+ st->buf[0] = REQUEST_SET_I2C_PARAM;
divider = (u16) (30000 / scl_kHz);
- b[2] = (u8) (divider >> 8);
- b[3] = (u8) (divider & 0xff);
+ st->buf[1] = 0;
+ st->buf[2] = (u8) (divider >> 8);
+ st->buf[3] = (u8) (divider & 0xff);
divider = (u16) (72000 / scl_kHz);
- b[4] = (u8) (divider >> 8);
- b[5] = (u8) (divider & 0xff);
+ st->buf[4] = (u8) (divider >> 8);
+ st->buf[5] = (u8) (divider & 0xff);
divider = (u16) (72000 / scl_kHz); /* clock: 72MHz */
- b[6] = (u8) (divider >> 8);
- b[7] = (u8) (divider & 0xff);
+ st->buf[6] = (u8) (divider >> 8);
+ st->buf[7] = (u8) (divider & 0xff);
deb_info("setting I2C speed: %04x %04x %04x (%d kHz).",
- (b[2] << 8) | (b[3]), (b[4] << 8) | b[5], (b[6] << 8) | b[7], scl_kHz);
- return dib0700_ctrl_wr(d, b, 8);
+ (st->buf[2] << 8) | (st->buf[3]), (st->buf[4] << 8) |
+ st->buf[5], (st->buf[6] << 8) | st->buf[7], scl_kHz);
+ return dib0700_ctrl_wr(d, st->buf, 8);
}
static int dib0700_jumpram(struct usb_device *udev, u32 address)
{
- int ret, actlen;
- u8 buf[8] = { REQUEST_JUMPRAM, 0, 0, 0,
- (address >> 24) & 0xff,
- (address >> 16) & 0xff,
- (address >> 8) & 0xff,
- address & 0xff };
+ int ret = 0, actlen;
+ u8 *buf;
+
+ buf = kmalloc(8, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+ buf[0] = REQUEST_JUMPRAM;
+ buf[1] = 0;
+ buf[2] = 0;
+ buf[3] = 0;
+ buf[4] = (address >> 24) & 0xff;
+ buf[5] = (address >> 16) & 0xff;
+ buf[6] = (address >> 8) & 0xff;
+ buf[7] = address & 0xff;
if ((ret = usb_bulk_msg(udev, usb_sndbulkpipe(udev, 0x01),buf,8,&actlen,1000)) < 0) {
deb_fw("jumpram to 0x%x failed\n",address);
- return ret;
+ goto out;
}
if (actlen != 8) {
deb_fw("jumpram to 0x%x failed\n",address);
- return -EIO;
+ ret = -EIO;
+ goto out;
}
- return 0;
+out:
+ kfree(buf);
+ return ret;
}
int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw)
{
struct hexline hx;
int pos = 0, ret, act_len, i, adap_num;
- u8 b[16];
+ u8 *buf;
u32 fw_version;
- u8 buf[260];
+ buf = kmalloc(260, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
while ((ret = dvb_usb_get_hexline(fw, &hx, &pos)) > 0) {
deb_fwdata("writing to address 0x%08x (buffer: 0x%02x %02x)\n",
if (ret < 0) {
err("firmware download failed at %d with %d",pos,ret);
- return ret;
+ goto out;
}
}
usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
REQUEST_GET_VERSION,
USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
- b, sizeof(b), USB_CTRL_GET_TIMEOUT);
- fw_version = (b[8] << 24) | (b[9] << 16) | (b[10] << 8) | b[11];
+ buf, 16, USB_CTRL_GET_TIMEOUT);
+ fw_version = (buf[8] << 24) | (buf[9] << 16) | (buf[10] << 8) | buf[11];
/* set the buffer size - DVB-USB is allocating URB buffers
* only after the firwmare download was successful */
}
}
}
-
+out:
+ kfree(buf);
return ret;
}
int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
{
struct dib0700_state *st = adap->dev->priv;
- u8 b[4];
int ret;
if ((onoff != 0) && (st->fw_version >= 0x10201)) {
}
}
- b[0] = REQUEST_ENABLE_VIDEO;
- b[1] = (onoff << 4) | 0x00; /* this bit gives a kind of command, rather than enabling something or not */
+ st->buf[0] = REQUEST_ENABLE_VIDEO;
+ /* this bit gives a kind of command,
+ * rather than enabling something or not */
+ st->buf[1] = (onoff << 4) | 0x00;
if (st->disable_streaming_master_mode == 1)
- b[2] = 0x00;
+ st->buf[2] = 0x00;
else
- b[2] = 0x01 << 4; /* Master mode */
+ st->buf[2] = 0x01 << 4; /* Master mode */
- b[3] = 0x00;
+ st->buf[3] = 0x00;
deb_info("modifying (%d) streaming state for %d\n", onoff, adap->id);
st->channel_state |= 1 << (3-adap->stream.props.endpoint);
}
- b[2] |= st->channel_state;
+ st->buf[2] |= st->channel_state;
- deb_info("data for streaming: %x %x\n", b[1], b[2]);
+ deb_info("data for streaming: %x %x\n", st->buf[1], st->buf[2]);
- return dib0700_ctrl_wr(adap->dev, b, 4);
+ return dib0700_ctrl_wr(adap->dev, st->buf, 4);
}
int dib0700_change_protocol(struct rc_dev *rc, u64 rc_type)
{
struct dvb_usb_device *d = rc->priv;
struct dib0700_state *st = d->priv;
- u8 rc_setup[3] = { REQUEST_SET_RC, 0, 0 };
int new_proto, ret;
+ st->buf[0] = REQUEST_SET_RC;
+ st->buf[1] = 0;
+ st->buf[2] = 0;
+
/* Set the IR mode */
if (rc_type == RC_TYPE_RC5)
new_proto = 1;
} else
return -EINVAL;
- rc_setup[1] = new_proto;
+ st->buf[1] = new_proto;
- ret = dib0700_ctrl_wr(d, rc_setup, sizeof(rc_setup));
+ ret = dib0700_ctrl_wr(d, st->buf, 3);
if (ret < 0) {
err("ir protocol setup failed");
return ret;
projects / mirror_ubuntu-jammy-kernel.git / commitdiff