media: i2c: imx258: use pm_runtime_resume_and_get()
Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.
Use the new API, in order to cleanup the error check logic.
media: i2c: imx219: use pm_runtime_resume_and_get()
Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.
Use the new API, in order to cleanup the error check logic.
media: i2c: imx214: use pm_runtime_resume_and_get()
Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.
Use the new API, in order to cleanup the error check logic.
media: i2c: hi556: use pm_runtime_resume_and_get()
Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.
Use the new API, in order to cleanup the error check logic.
media: i2c: dw9807-vcm: use pm_runtime_resume_and_get()
Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.
Use the new API, in order to cleanup the error check logic.
media: i2c: dw9768: use pm_runtime_resume_and_get()
Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.
Use the new API, in order to cleanup the error check logic.
media: i2c: dw9714: use pm_runtime_resume_and_get()
Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.
Use the new API, in order to cleanup the error check logic.
media: i2c: ak7375: use pm_runtime_resume_and_get()
Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.
Use the new API, in order to cleanup the error check logic.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Emil Velikov [Thu, 1 Apr 2021 14:43:33 +0000 (16:43 +0200)]
media: hantro: add fallback handling for single irq/clk
Currently the driver expects that each irq/clk will have a name
specified.
A valid point was raised by the DT maintainers - when there is a single
interrupt line or clock - the names are not needed.
Keep the names within the drivers themselves, but don't use them when
only a single entry exists. Instead use:
- num_clk == 1 - devm_clk_get(..., NULL)
- num_irq == 1 - platform_get_irq(..., 0)
Suggested-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Emil Velikov [Thu, 1 Apr 2021 14:43:32 +0000 (16:43 +0200)]
media: hantro: introduce hantro_g1.c for common API
The Hantro G1 IRQ and reset handling is pretty standard. I was this
close to duplicating it, yet again, before reconsidering and refactoring
it to a separate file.
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Emil Velikov [Thu, 1 Apr 2021 14:43:28 +0000 (16:43 +0200)]
media: hantro: use G1_REG_INTERRUPT directly for the mpeg2
Use the register directly over the existing SWREG().
Ideally we'll port the driver away from the local registers, but for
now this is enough. For context - I was reading through the IRQ register
handling across the variants.
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
syzbot has reported the following warning in pvr2_i2c_done:
sysfs group 'power' not found for kobject '1-0043'
When the device is disconnected (pvr_hdw_disconnect), the i2c adapter is
not unregistered along with the USB and v4l2 teardown. As part of the USB
device disconnect, the sysfs files of the subdevices are also deleted.
So, by the time pvr_i2c_core_done is called by pvr_context_destroy, the
sysfs files have been deleted.
To fix this, unregister the i2c adapter too in pvr_hdw_disconnect. Make
the device deregistration code shared by calling pvr_hdw_disconnect from
pvr2_hdw_destroy.
Randy Dunlap [Fri, 30 Apr 2021 20:19:55 +0000 (22:19 +0200)]
media: I2C: change 'RST' to "RSET" to fix multiple build errors
The use of an enum named 'RST' conflicts with a #define macro
named 'RST' in arch/mips/include/asm/mach-rc32434/rb.h.
The MIPS use of RST was there first (AFAICT), so change the
media/i2c/ uses of RST to be named 'RSET'.
'git grep -w RSET' does not report any naming conflicts with the
new name.
This fixes multiple build errors:
arch/mips/include/asm/mach-rc32434/rb.h:15:14: error: expected identifier before '(' token
15 | #define RST (1 << 15)
| ^
drivers/media/i2c/s5c73m3/s5c73m3.h:356:2: note: in expansion of macro 'RST'
356 | RST,
| ^~~
../arch/mips/include/asm/mach-rc32434/rb.h:15:14: error: expected identifier before '(' token
15 | #define RST (1 << 15)
| ^
../drivers/media/i2c/s5k6aa.c:180:2: note: in expansion of macro 'RST'
180 | RST,
| ^~~
../arch/mips/include/asm/mach-rc32434/rb.h:15:14: error: expected identifier before '(' token
15 | #define RST (1 << 15)
| ^
../drivers/media/i2c/s5k5baf.c:238:2: note: in expansion of macro 'RST'
238 | RST,
| ^~~
and some others that I have trimmed.
Fixes: cac47f1822fc ("[media] V4L: Add S5C73M3 camera driver") Fixes: 8b99312b7214 ("[media] Add v4l2 subdev driver for S5K4ECGX sensor") Fixes: 7d459937dc09 ("[media] Add driver for Samsung S5K5BAF camera sensor") Fixes: bfa8dd3a0524 ("[media] v4l: Add v4l2 subdev driver for S5K6AAFX sensor") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Sangwook Lee <sangwook.lee@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dependent slice segment flag for PPS control is misnamed. It should have
"enabled" at the end. It only tells if this flag is present in slice
header or not and not the actual value.
Fix this by renaming the PPS flag and introduce another flag for slice
control which tells actual value.
Pavel Skripkin [Wed, 21 Apr 2021 19:43:45 +0000 (21:43 +0200)]
media: cpia2: fix memory leak in cpia2_usb_probe
syzbot reported leak in cpia2 usb driver. The problem was
in invalid error handling.
v4l2_device_register() is called in cpia2_init_camera_struct(), but
all error cases after cpia2_init_camera_struct() did not call the
v4l2_device_unregister()
Reported-by: syzbot+d1e69c888f0d3866ead4@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sebastian Fricke [Sun, 18 Apr 2021 10:34:25 +0000 (12:34 +0200)]
media: rkisp1: rksip1-capture.c: Improve comments and fix typos
Improve the wording of the function description to increase readability.
Fix three typos:
s/during processing a frame/while processing a frame/
s/it also update/it also updates/
s/there's not buf in shadow/there's no buffer in a shadow register/
Replace the abbreviation 'buf' with the full word buffer, the
abbreviation 'config' with the verb configure, and 'regs' with registers.
The goal of this change is to ease the reading flow of the comment.
Signed-off-by: Sebastian Fricke <sebastian.fricke@posteo.net> Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Colin Ian King [Fri, 9 Apr 2021 09:15:31 +0000 (11:15 +0200)]
media: s2255drv: remove redundant assignment to variable field
The variable 'field' is being assigned a value this is never read,
it is being updated in all the following if/else combinations. The
assignment is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
media: staging: media: atomisp: replace raw pr_*() by dev_dbg()
It is recommended to use driver model diagnostic macros dev_*() instead
of raw printk() or pr_*() since the former ensures that the log messages
are always associated with the corresponding device and driver. This also
addresses the checkpatch complain for not using KERN_<LEVEL> facility in
printk() call.
Suggested-by: Fabio Aiuto <fabioaiuto83@gmail.com> Signed-off-by: Deepak R Varma <drv@mailo.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mixed case variable names are discouraged and they result in checkpatch
script "Avoid CamelCase" warnings. Replace such CamelCase variable names
by lower case strings according to the coding style guidelines.
Signed-off-by: Deepak R Varma <drv@mailo.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
According to the coding style guidelines, if...else blocks with single
instructions do not need enclosing braces. This resolves checkpatch
WARNING / CHECK complaints.
Signed-off-by: Deepak R Varma <drv@mailo.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
media: staging: media: atomisp: balance braces around if...else block
Balance braces around the if else blocks as per the code style guidelines.
Add braces to branches where it is missing. Resolves checkpatch script
CHECK / WARNING feedback messages.
Signed-off-by: Deepak R Varma <drv@mailo.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Move the support check to the beginning of the function.
Change the logic to avoid multiple nesting blocks.
Move 'err' variable assignment outside of the if statement.
Remove an unnecessary check whether 'j' is zero.
media: staging: media: atomisp: pci: Balance braces around conditional statements in file atomisp_v4l2.c
Balance braces around conditional statements.
Issue detected by checkpatch.pl.
It happens in if-else statements where one of the commands
uses braces around a block of code and the other command
does not since it has just a single line of code.
media: staging: media: atomisp: pci: Balance braces around conditional statements in file atomisp_subdev.c
Balance braces around conditional statements.
Issue detected by checkpatch.pl.
It happens in if-else statements where one of the commands
uses braces around a block of code and the other command
does not since it has just a single line of code.
media: staging: media: atomisp: pci: Balance braces around conditional statements in file atomisp_compat_css20.c
Balance braces around conditional statements.
Issue detected by checkpatch.pl.
It happens in if-else statements where one of the commands
uses braces around a block of code and the other command
does not since it has just a single line of code.
media: staging: media: atomisp: pci: Balance braces around conditional statements in file atomisp_cmd.c
Balance braces around conditional statements.
Issue detected by checkpatch.pl.
It happens in if-else statements where one of the commands
uses braces around a block of code and the other command
does not since it has just a single line of code.
media: staging: media: atomisp: pci: Correct identation in block of conditional statements in file atomisp_v4l2.c
Correct identation in block of conditional statements.
The function "v4l2_device_unregister_subdev()" depends on
the results of the macro function "list_for_each_entry_safe()".
media: staging: media: intel-ipu3: line should not end with '['
Fixed the issue of line should not end with '[' by moving argument
from next line to line ending with '[' and made it under 80
characters.
Reported by checkpatch.
Signed-off-by: Mitali Borkar <mitaliborkar810@gmail.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
media: staging: media: intel-ipu3: reduce length of line
Reduced length of line as it was exceeding 100 characters by removing
comments from same line and adding it to previous line. This makes code
neater, and meets linux kernel coding style.
Reported by checkpatch.
The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.
As a bonus, as pm_runtime_get_sync() always return 0 on
success, the logic can be simplified.
The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
On some places, this is ok, but on others the usage count
ended being unbalanced on failures.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.
As a bonus, such function always return zero on success. So,
some code can be simplified.
The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
The bdisp_start_streaming() doesn't take it into account, which
would unbalance PM usage counter at bdisp_stop_streaming().
The logic at bdisp_probe() is correct, but the best is to use
the same call along the driver.
So, replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.
Use the new API, in order to cleanup the error check logic.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.
As a plus, pm_runtime_resume_and_get() doesn't return
positive numbers, so the return code validation can
be removed.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently, the driver just assumes that PM runtime logic
succeded resuming the device.
That may not be the case, as pm_runtime_get_sync()
can fail (but keeping the usage count incremented).
Replace the code to use pm_runtime_resume_and_get(),
and letting it return the error code.
This way, if mtk_vcodec_dec_pw_on() fails, the logic
under fops_vcodec_open() will do the right thing and
return an error, instead of just assuming that the
device is ready to be used.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.
While here, check if the PM runtime error was caught at open time.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.
While here, ensure that the driver will check if PM runtime
resumed at vpfe_initialize_device().
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.
While here, check if the PM runtime error was caught at
s5p_cec_adap_enable().
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Right now, the driver just assumes that PM runtime resume
worked, but it may fail.
Well, the pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
So, using it is tricky. Let's replace it by the new
pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
and return an error if something bad happens.
This should ensure that the PM runtime usage_count will be
properly decremented if an error happens at open time.
The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.
Also, right now, the driver is ignoring any troubles when
trying to do PM resume. So, add the proper error handling
for the code.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.
While here, fix the return contition of mtk_mdp_m2m_start_streaming(),
as it doesn't make any sense to return 0 if the PM runtime failed
to resume.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
media: marvel-ccic: fix some issues when getting pm_runtime
Calling pm_runtime_get_sync() is bad, since even when it
returns an error, pm_runtime_put*() should be called.
So, use instead pm_runtime_resume_and_get().
While here, ensure that the error condition will be checked
during clock enable an media open() calls.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are several issues in the way the atmel driver handles
pm_runtime_get_sync():
- it doesn't check return codes;
- it doesn't properly decrement the usage_count on all places;
- it starts streaming even if pm_runtime_get_sync() fails.
- while it tries to get pm_runtime at the clock enable logic,
it doesn't check if the operation was suceeded.
Replace all occurrences of it to use the new kAPI:
pm_runtime_resume_and_get(), which ensures that, if the
return code is not negative, the usage_count was incremented.
With that, add additional checks when this is called, in order
to ensure that errors will be properly addressed.
Calling pm_runtime_get_sync() at driver's removal time is not
needed, as this will resume PM runtime. Also, the PM runtime
code at pm_runtime_disable() already calls it, if it detects
the need.
So, change the logic in order to disable PM runtime earlier.
The PM runtime get logic is currently broken, as it checks if
ret is zero instead of checking if it is an error code,
as reported by Dan Carpenter.
While here, use the pm_runtime_resume_and_get() as added by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors. As a bonus, such function
always return zero on success.
It should also be noticed that a fail of pm_runtime_get_sync() would
potentially result in a spurious runtime_suspend(), instead of
using pm_runtime_put_noidle().
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
There is a bug at ccs_pm_get_init(): when this function returns
an error, the stream is not started, and RPM usage_count
should not be incremented. However, if the calls to
v4l2_ctrl_handler_setup() return errors, it will be kept
incremented.
At ccs_suspend() the best is to replace it by the new
pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter automatically,
in the case of errors.
Fixes: 96e3a6b92f23 ("media: smiapp: Avoid maintaining power state information") Cc: stable@vger.kernel.org Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
media: i2c: ccs-core: return the right error code at suspend
If pm_runtime resume logic fails, return the error code
provided by it, instead of -EAGAIN, as, depending on what
caused it to fail, it may not be something that would be
recovered.
Fixes: cbba45d43631 ("[media] smiapp: Use runtime PM") Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There's a bug at s5p_cec_adap_enable(): if called to
disable the device, it should call pm_runtime_put()
instead of pm_runtime_disable(), as the goal here is to
decrement the usage_count and not to disable PM runtime.
The Venus code has a sort of watchdog that attempts to recover
from IP errors, implemented as a delayed work job, which
calls venus_sys_error_handler().
Right now, it has several issues:
1. It assumes that PM runtime resume never fails
2. It internally runs two while() loops that also assume that
PM runtime will never fail to go idle:
while (pm_runtime_active(core->dev_dec) || pm_runtime_active(core->dev_enc))
msleep(10);
...
while (core->pmdomains[0] && pm_runtime_active(core->pmdomains[0]))
usleep_range(1000, 1500);
3. It uses an OR to merge all return codes and then report to the user
4. If the hardware never recovers, it keeps running on every 10ms,
flooding the syslog with 2 messages (so, up to 200 messages
per second).
Rework the code, in order to prevent that, by:
1. check the return code from PM runtime resume;
2. don't let the while() loops run forever;
3. store the failed event;
4. use warn ratelimited when it fails to recover.
Fixes: af2c3834c8ca ("[media] media: venus: adding core part and helper functions") Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.
Linus Torvalds [Sun, 9 May 2021 21:03:33 +0000 (14:03 -0700)]
fbmem: fix horribly incorrect placement of __maybe_unused
Commit b9d79e4ca4ff ("fbmem: Mark proc_fb_seq_ops as __maybe_unused")
places the '__maybe_unused' in an entirely incorrect location between
the "struct" keyword and the structure name.
It's a wonder that gcc accepts that silently, but clang quite reasonably
warns about it:
Linus Torvalds [Sun, 9 May 2021 20:42:39 +0000 (13:42 -0700)]
Merge tag 'drm-next-2021-05-10' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Bit later than usual, I queued them all up on Friday then promptly
forgot to write the pull request email. This is mainly amdgpu fixes,
with some radeon/msm/fbdev and one i915 gvt fix thrown in.
amdgpu:
- MPO hang workaround
- Fix for concurrent VM flushes on vega/navi
- dcefclk is not adjustable on navi1x and newer
- MST HPD debugfs fix
- Suspend/resumes fixes
- Register VGA clients late in case driver fails to load
- Fix GEM leak in user framebuffer create
- Add support for polaris12 with 32 bit memory interface
- Fix duplicate cursor issue when using overlay
- Fix corruption with tiled surfaces on VCN3
- Add BO size and stride check to fix BO size verification
radeon:
- Fix off-by-one in power state parsing
- Fix possible memory leak in power state parsing
msm:
- NULL ptr dereference fix
fbdev:
- procfs disabled warning fix
i915:
- gvt: Fix a possible division by zero in vgpu display rate
calculation"
* tag 'drm-next-2021-05-10' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: Use device specific BO size & stride check.
drm/amdgpu: Init GFX10_ADDR_CONFIG for VCN v3 in DPG mode.
drm/amd/pm: initialize variable
drm/radeon: Avoid power table parsing memory leaks
drm/radeon: Fix off-by-one power_state index heap overwrite
drm/amd/display: Fix two cursor duplication when using overlay
drm/amdgpu: add new MC firmware for Polaris12 32bit ASIC
fbmem: Mark proc_fb_seq_ops as __maybe_unused
drm/msm/dpu: Delete bonkers code
drm/i915/gvt: Prevent divided by zero when calculating refresh rate
amdgpu: fix GEM obj leak in amdgpu_display_user_framebuffer_create
drm/amdgpu: Register VGA clients after init can no longer fail
drm/amdgpu: Handling of amdgpu_device_resume return value for graceful teardown
drm/amdgpu: fix r initial values
drm/amd/display: fix wrong statement in mst hpd debugfs
amdgpu/pm: set pp_dpm_dcefclk to readonly on NAVI10 and newer gpus
amdgpu/pm: Prevent force of DCEFCLK on NAVI10 and SIENNA_CICHLID
drm/amdgpu: fix concurrent VM flushes on Vega/Navi v2
drm/amd/display: Reject non-zero src_y and src_x for video planes
Linus Torvalds [Sun, 9 May 2021 20:25:14 +0000 (13:25 -0700)]
Merge tag 'block-5.13-2021-05-09' of git://git.kernel.dk/linux-block
Pull block fix from Jens Axboe:
"Turns out the bio max size change still has issues, so let's get it
reverted for 5.13-rc1. We'll shake out the issues there and defer it
to 5.14 instead"
* tag 'block-5.13-2021-05-09' of git://git.kernel.dk/linux-block:
Revert "bio: limit bio max size"
Linus Torvalds [Sun, 9 May 2021 20:19:29 +0000 (13:19 -0700)]
Merge tag '5.13-rc-smb3-part3' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Three small SMB3 chmultichannel related changesets (also for stable)
from the SMB3 test event this week.
The other fixes are still in review/testing"
* tag '5.13-rc-smb3-part3' of git://git.samba.org/sfrench/cifs-2.6:
smb3: if max_channels set to more than one channel request multichannel
smb3: do not attempt multichannel to server which does not support it
smb3: when mounting with multichannel include it in requested capabilities
Linus Torvalds [Sun, 9 May 2021 20:14:34 +0000 (13:14 -0700)]
Merge tag 'sched-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"A set of scheduler updates:
- Prevent PSI state corruption when schedule() races with cgroup
move.
A recent commit combined two PSI callbacks to reduce the number of
cgroup tree updates, but missed that schedule() can drop rq::lock
for load balancing, which opens the race window for
cgroup_move_task() which then observes half updated state.
The fix is to solely use task::ps_flags instead of looking at the
potentially mismatching scheduler state
- Prevent an out-of-bounds access in uclamp caused bu a rounding
division which can lead to an off-by-one error exceeding the
buckets array size.
- Prevent unfairness caused by missing load decay when a task is
attached to a cfs runqueue.
The old load of the task was attached to the runqueue and never
removed. Fix it by enforcing the load update through the hierarchy
for unthrottled run queue instances.
- A documentation fix fot the 'sched_verbose' command line option"
* tag 'sched-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix unfairness caused by missing load decay
sched: Fix out-of-bound access in uclamp
psi: Fix psi state corruption when schedule() races with cgroup move
sched,doc: sched_debug_verbose cmdline should be sched_verbose
Linus Torvalds [Sun, 9 May 2021 20:07:03 +0000 (13:07 -0700)]
Merge tag 'locking-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"A set of locking related fixes and updates:
- Two fixes for the futex syscall related to the timeout handling.
FUTEX_LOCK_PI does not support the FUTEX_CLOCK_REALTIME bit and
because it's not set the time namespace adjustment for clock
MONOTONIC is applied wrongly.
FUTEX_WAIT cannot support the FUTEX_CLOCK_REALTIME bit because its
always a relative timeout.
- Cleanups in the futex syscall entry points which became obvious
when the two timeout handling bugs were fixed.
- Cleanup of queued_write_lock_slowpath() as suggested by Linus
- Fixup of the smp_call_function_single_async() prototype"
* tag 'locking-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Make syscall entry points less convoluted
futex: Get rid of the val2 conditional dance
futex: Do not apply time namespace adjustment on FUTEX_LOCK_PI
Revert 337f13046ff0 ("futex: Allow FUTEX_CLOCK_REALTIME with FUTEX_WAIT op")
locking/qrwlock: Cleanup queued_write_lock_slowpath()
smp: Fix smp_call_function_single_async prototype
Linus Torvalds [Sun, 9 May 2021 20:00:26 +0000 (13:00 -0700)]
Merge tag 'perf_urgent_for_v5.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fix from Borislav Petkov:
"Handle power-gating of AMD IOMMU perf counters properly when they are
used"
* tag 'perf_urgent_for_v5.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/events/amd/iommu: Fix invalid Perf result due to IOMMU PMC power-gating
Linus Torvalds [Sun, 9 May 2021 19:52:25 +0000 (12:52 -0700)]
Merge tag 'x86_urgent_for_v5.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"A bunch of things accumulated for x86 in the last two weeks:
- Fix guest vtime accounting so that ticks happening while the guest
is running can also be accounted to it. Along with a consolidation
to the guest-specific context tracking helpers.
- Provide for the host NMI handler running after a VMX VMEXIT to be
able to run on the kernel stack correctly.
- Initialize MSR_TSC_AUX when RDPID is supported and not RDTSCP (virt
relevant - real hw supports both)
- A code generation improvement to TASK_SIZE_MAX through the use of
alternatives
- The usual misc and related cleanups and improvements"
* tag 'x86_urgent_for_v5.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
KVM: x86: Consolidate guest enter/exit logic to common helpers
context_tracking: KVM: Move guest enter/exit wrappers to KVM's domain
context_tracking: Consolidate guest enter/exit wrappers
sched/vtime: Move guest enter/exit vtime accounting to vtime.h
sched/vtime: Move vtime accounting external declarations above inlines
KVM: x86: Defer vtime accounting 'til after IRQ handling
context_tracking: Move guest exit vtime accounting to separate helpers
context_tracking: Move guest exit context tracking to separate helpers
KVM/VMX: Invoke NMI non-IST entry instead of IST entry
x86/cpu: Remove write_tsc() and write_rdtscp_aux() wrappers
x86/cpu: Initialize MSR_TSC_AUX if RDTSCP *or* RDPID is supported
x86/resctrl: Fix init const confusion
x86: Delete UD0, UD1 traces
x86/smpboot: Remove duplicate includes
x86/cpu: Use alternative to generate the TASK_SIZE_MAX constant