sayli karnik [Mon, 13 Mar 2017 16:35:27 +0000 (22:05 +0530)]
staging: iio: ad9834: Use private driver lock instead of mlock
iio_dev->mlock should be used by the IIO core only for protecting
device operating mode changes. ie. Changes between INDIO_DIRECT_MODE,
INDIO_BUFFER_* modes.
Replace mlock with a lock in the device's global data to protect
hardware state changes.
Signed-off-by: sayli karnik <karniksayli1995@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
iio: pc104: Mask PC/104 drivers via the PC104 Kconfig option
PC/104 drivers should be hidden on machines which do not support PC/104
devices. This patch adds the PC104 Kconfig option as a dependency for
the relevant PC/104 device driver Kconfig options.
Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
simran singhal [Sat, 11 Mar 2017 14:26:44 +0000 (19:56 +0530)]
staging: iio: gyro: Remove & on function name to conform to similar IIO drivers
Remove & from function pointers to conform to the style preferred in IIO.
(Note that this is fine in staging drivers, but would create too much churn
to do outside of staging, unless otherwise working on a driver).
Done using the following semantic patch
// <smpl>
@r@
identifier f;
@@
f(...) { ... }
@@
identifier r.f;
@@
- &f
+ f
// </smpl>
Signed-off-by: simran singhal <singhalsimran0@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
staging: iio: ad9832: replace mlock with driver private lock
The IIO subsystem is redefining iio_dev->mlock to be used by
the IIO core only for protecting device operating mode changes.
ie. Changes between INDIO_DIRECT_MODE, INDIO_BUFFER_* modes.
In this driver, mlock was being used to protect hardware state
changes. Replace it with a lock in the devices global data.
Signed-off-by: Alison Schofield <amsfield22@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Quentin Schulz [Tue, 13 Dec 2016 14:33:32 +0000 (15:33 +0100)]
iio: adc: add support for Allwinner SoCs ADC
The Allwinner SoCs all have an ADC that can also act as a touchscreen
controller and a thermal sensor. This patch adds the ADC driver which is
based on the MFD for the same SoCs ADC.
This also registers the thermal adc channel in the iio map array so
iio_hwmon could use it without modifying the Device Tree. This registers
the driver in the thermal framework.
The thermal sensor requires the IP to be in touchscreen mode to return
correct values. Therefore, if the user is continuously reading the ADC
channel(s), the thermal framework in which the thermal sensor is
registered will switch the IP in touchscreen mode to get a temperature
value and requires a delay of 100ms (because of the mode switching),
then the ADC will switch back to ADC mode and requires also a delay of
100ms. If the ADC readings are critical to user and the SoC temperature
is not, this driver is capable of not registering the thermal sensor in
the thermal framework and thus, "quicken" the ADC readings.
This driver probes on three different platform_device_id to take into
account slight differences (registers bit and temperature computation)
between Allwinner SoCs ADCs.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Wolfram Sang [Mon, 6 Feb 2017 16:54:11 +0000 (17:54 +0100)]
MAINTAINERS: drop broken reference to i2c/trivial-devices
Due to RST rework, the reference to i2c/trivial-devices was changed, but the
result is broken. However, let's just drop the whole reference, since it
doesn't make sense in the first place to reference this "global" file
for a single driver.
Fixes: 8c27ceff3604b2 ("docs: fix locations of several documents that got moved") Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Kevin Tsai <ktsai@capellamicro.com> Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The camera code has an explicit cache flush operation
which is not portable. Now that vc04_services is using portable
DMA APIs that already do the cache flushing, explicit flushes
should no longer be needed.
The one call to __cpuc_flush_dcache_area has been removed.
Testing:
The offical V2 camera for the RPI was tested on a RPI 3
running in 32 bit mode(armhf). The cheese application
and ffmpeg was used to view and stream video from the
camera. Nothing new seems to be broken without the
cache flushing.
Signed-off-by: Michael Zoran <mzoran@crowfest.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gargi Sharma [Thu, 2 Mar 2017 17:42:55 +0000 (23:12 +0530)]
staging: lustre: Remove lustre_eacl.h
The structures and the macros in the header file are not used
anywhere inside the kernel (verified by using grep). The structures
and macros were leftover from the patch 341f1f0affed1c24712f37c95bb654b3b33ab2c6 "staging: lustre: remove
remote client support". Also, removed the include statements for
lustre_eacl.h.
Signed-off-by: Gargi Sharma <gs051095@gmail.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The structure is used as an argument to module_param macro. This
macro calls a bunch of other macros and finally assigns the instance
of the kernel_param_ops structure to the const struct
kernel_param_ops* field of a variable of type kernel_param. Hence,
const can be added to the structure.
Aishwarya Pant [Wed, 1 Mar 2017 12:36:30 +0000 (18:06 +0530)]
staging: dgnc: replace usleep_range with udelay
udelay is impelmented using a busy-wait loop and consumes CPU cycles
while usleep_range is implemented using interrupts.cls_flush_uart_write()
is called after a channel lock is acquired i.e. an atomic context.
Hence delay in this method should use udelay instead of usleep_range.
Gargi Sharma [Sun, 5 Mar 2017 09:51:44 +0000 (15:21 +0530)]
staging: dgnc: Constify ktermios structure
The ktermios structure is a local default termios struct. All ports
are initially created with this termios. Since, the structure is
never modified, it can be declared as const.
Michael Zoran [Thu, 2 Mar 2017 03:10:49 +0000 (19:10 -0800)]
staging: bcm2835-camera: select BCM2835_VCHIQ rather then depending on it.
Change the camera's dependency on BCM2835_VCHIQ to a select
since camera support is typically more important to people
then base VCHIQ(which they may not even know what it's for).
Also, with a dependency the camera support would not be
visiable until VCHIQ is selected first, and that may
not be what most people would expect.
Signed-off-by: Michael Zoran <mzoran@crowfest.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Zoran [Thu, 2 Mar 2017 03:10:48 +0000 (19:10 -0800)]
staging: bcm2835-audio: select BCM2835_VCHIQ rather then depending on it.
Change the audio's dependency on BCM2835_VCHIQ to a select
since audio support is typically more important to people
then base VCHIQ(which they may not even know what it's for).
Also, with a dependency the audio support would not be
visiable until VCHIQ is selected first, and that may
not be what most people would expect.
Signed-off-by: Michael Zoran <mzoran@crowfest.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Zoran [Thu, 2 Mar 2017 03:10:47 +0000 (19:10 -0800)]
staging: vc04_services: Create new BCM_VIDEOCORE setting for VideoCore services.
Create a new memuconfig for Broadcom VideoCore services
since VideoCore is a general term used by Broadcom for a
large family of products that includes more then the BCM2835.
Signed-off-by: Michael Zoran <mzoran@crowfest.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'iio-for-4.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First set of IIO new device support, features and cleanup for the 4.12 cycle.
Quite a bit of outreachy activity here with a driver from a current intern
and a number of cleanup patches as part of the next round.
Getting a pull request in early this cycle as it's looking like another large
cycle for IIO.
New device support
* adxl345
- initial device support. Note, once complete support is done the intent
is to superceded the driver in input/misc.
- bindings.
- conversion from i2c direct calls to regmap and driver split.
- spi support.
* chromeos light and proximity.
- new driver.
* devantech srf04 ultrasonic ranger
- new driver with device tree bindings.
* hid temperature
- new driver for environemntal temperature support from hid devices.
* max30102 oximeter
- new driver with device tree bindings.
* st lsm6dsx
- refactor and addition of device support for lsm6dsl and lsm6ds3h.
Staging graduation
* isl29028 including copyright notice update to reflect Brian's work.
* lpc32xx_adc.
* spear adc. It's not perfect and there are some datasheet disagreements, but
it works and is good enough to graduate.
New features
* documentation
- abi docs for in_proximity_sampling_frequency_available.
- generalise counting direction ABI docs as a second driver is going to
use them.
* hid-sensor-prox
- Add support for HID_USAGE_SENSOR_HUMAN_PRESENCE if used on a particular
device.
* isl29028
- runtime pm.
* meson-saradc
- switch from polling to interrupt mode and improved read_raw_sample function
to avoid unnecessary loop.
* tmp007
- interrupt and threshold event support.
Cleanups and minor fixes
* ad2s1210
- permissions to octal.
* ad7192
- permissions to octal.
- use BIT macro.
* ad9832
- merge header definitions into source file.
* ad9834
- merge header definitions into source file.
* ade7753
- merge header definitions into source file.
- cleanup include ordering.
* ade7854
- simplify return logic.
* adis16201
- merge header definitions into source file.
- rename _core.c to .c as there is nothing else.
* adis16203
- merge header definitions into source file.
- rename _core.c to .c as there is nothing else.
* adis16209
- merge header definitions into source file.
- rename _core.c to .c as there is nothing else.
* adis16240
- permissions to octal.
- merge header definitions into source file.
- rename _core.c to .c as there is nothing else.
* adt7136
- permissions to octal.
* cio-dac
- set missing parent device.
* documentation
- update version numbers on sysfs ABI for counter bits that didn't quite.
make 4.9.
* isl29028
- mdelay to msleep.
- incorrrect sleep time when taking first proximity reading.
* lmp91000
- set missing parent device.
* lpc32xx
- Consistent prefixes for defines.
- rename local state structure to _state.
* max30100
- set missing parent device.
* max30102
- set missing parent device.
* maxim-thermocouple
- set missing parent device.
* meter driver header
- permissions to octal.
* pulsedlight-lidar-lite-v2
- set missing parent device.
* quad-8
- set missing parent device.
* st104
- set missing parent device.
Other
* Mailmap
- update Matt Ranostay's email address to the Konsolko one.
Alan Cox [Mon, 6 Mar 2017 11:21:04 +0000 (11:21 +0000)]
atomisp2: unify some ifdef cases caused by format changes
The two drivers were originally merged by tools, and the tools didn't always
spot white space only changes. Fix a few of them found by zero-day and clean
up some more by hand.
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Varsha Rao [Sat, 4 Mar 2017 17:19:29 +0000 (22:49 +0530)]
staging: media: atomisp: Removes the FSF mailing address.
This patch fixes the checkpatch issue by removing the Free Software
Foundation's mailing address from the sample GPL notice. Because the FSF
has changed address in the past, and may change again. Linux already
includes a copy of the GPL.
Alan Cox [Fri, 17 Feb 2017 16:55:17 +0000 (16:55 +0000)]
staging/atomisp: Add support for the Intel IPU v2
This patch adds support for the Intel IPU v2 as found on Android and IoT
Baytrail-T and Baytrail-CR platforms (those with the IPU PCI mapped). You
will also need the firmware files from your device (Android usually puts
them into /etc) - or you can find them in the downloadable restore/upgrade
kits if you blew them away for some reason.
It may be possible to extend the driver to handle the BYT/T windows
platforms such as the ASUS T100TA. These platforms don't expose the IPU via
the PCI interface but via ACPI buried in the GPU description and with the
camera information somewhere unknown so would need a platform driver
interface adding to the codebase *IFF* the firmware works on such devices.
To get good results you also need a suitable support library such as
libxcam. The camera is intended to be driven from Android so it has a lot of
features that many desktop apps don't fully spport.
In theory all the pieces are there to build it with -DISP2401 and some
differing files to get CherryTrail/T support, but unifying the drivers
properlly is a work in progress.
The IPU driver represents the work of a lot of people within Intel over many
years. It's historical goal was portability rather than Linux upstream. Any
queries about the upstream aimed driver should be sent to me not to the
original authors.
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removed unnecessary variable and used instead the parameter
that was already defined
Signed-off-by: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: bcm2835-camera: Refactored get_format function
Now, when the condition inside the for is fulfilled, I return the result,
instead of checking afterwards whether the counter has reached or not
the end of the list.
Signed-off-by: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / mirror_ubuntu-hirsute-kernel.git / log