drm/i915/tgl: Guard and warn if more than one eDP panel is present
On TGL+ it's possible to have PSR1 enabled in other ports besides DDIA.
PSR2 is still limited to DDIA. However currently we handle only one
instance of PSR struct. Lets guard intel_psr_init_dpcd() against
multiple eDP panels and warn about it.
v2: Reword commit message to be TGL+ only and with the info where
PSR1/PSR2 are supported (Lucas)
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190823082055.5992-6-lucas.demarchi@intel.com
Chris Wilson [Tue, 27 Aug 2019 13:26:31 +0000 (14:26 +0100)]
drm/i915: Only activate i915_active debugobject once
The point of debug_object_activate is to mark the first, and only the
first, acquisition. The object then remains active until the last
release. However, we marked up all successful first acquires even though
we allowed concurrent parties to try and acquire the i915_active
simultaneously (serialised by the i915_active.mutex).
Chris Wilson [Mon, 26 Aug 2019 13:07:50 +0000 (14:07 +0100)]
drm/i915: Use NOEVICT for first pass on attemping to pin a GGTT mmap
The intention is that we first try to pin the current vma into the
mappable aperture only if it is already in use or it fits in the free
space and will not cause contention. The first attempt was meant to be
using PIN_NOEVICT to reuse the current vma if possible, following up
with different eviction strategies.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111485 Fixes: 6846895fde05 ("drm/i915: Replace PIN_NONFAULT with calls to PIN_NOEVICT") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190826130750.17272-1-chris@chris-wilson.co.uk
Chris Wilson [Mon, 26 Aug 2019 07:21:22 +0000 (08:21 +0100)]
drm/i915/selftests: Add the usual batch vma managements to st_workarounds
To properly handle asynchronous migration of batch objects, we need to
couple the fences on the incoming batch into the request and should not
assume that they always start idle.
Lyude Paul [Fri, 23 Aug 2019 20:52:51 +0000 (16:52 -0400)]
drm/i915: Call dma_set_max_seg_size() in i915_driver_hw_probe()
Currently, we don't call dma_set_max_seg_size() for i915 because we
intentionally do not limit the segment length that the device supports.
However, this results in a warning being emitted if we try to map
anything larger than SZ_64K on a kernel with CONFIG_DMA_API_DEBUG_SG
enabled:
[ 7.751926] DMA-API: i915 0000:00:02.0: mapping sg segment longer
than device claims to support [len=98304] [max=65536]
[ 7.751934] WARNING: CPU: 5 PID: 474 at kernel/dma/debug.c:1220
debug_dma_map_sg+0x20f/0x340
This was originally brought up on
https://bugs.freedesktop.org/show_bug.cgi?id=108517 , and the consensus
there was it wasn't really useful to set a limit (and that dma-debug
isn't really all that useful for i915 in the first place). Unfortunately
though, CONFIG_DMA_API_DEBUG_SG is enabled in the debug configs for
various distro kernels. Since a WARN_ON() will disable automatic problem
reporting (and cause any CI with said option enabled to start
complaining), we really should just fix the problem.
Note that as me and Chris Wilson discussed, the other solution for this
would be to make DMA-API not make such assumptions when a driver hasn't
explicitly set a maximum segment size. But, taking a look at the commit
which originally introduced this behavior, commit 78c47830a5cb
("dma-debug: check scatterlist segments"), there is an explicit mention
of this assumption and how it applies to devices with no segment size:
Conversely, devices which are less limited than the rather
conservative defaults, or indeed have no limitations at all
(e.g. GPUs with their own internal MMU), should be encouraged to
set appropriate dma_parms, as they may get more efficient DMA
mapping performance out of it.
So unless there's any concerns (I'm open to discussion!), let's just
follow suite and call dma_set_max_seg_size() with UINT_MAX as our limit
to silence any warnings.
Changes since v3:
* Drop patch for enabling CONFIG_DMA_API_DEBUG_SG in CI. It looks like
just turning it on causes the kernel to spit out bogus WARN_ONs()
during some igt tests which would otherwise require teaching igt to
disable the various DMA-API debugging options causing this. This is
too much work to be worth it, since DMA-API debugging is useless for
us. So, we'll just settle with this single patch to squelch WARN_ONs()
during driver load for users that have CONFIG_DMA_API_DEBUG_SG turned
on for some reason.
* Move dma_set_max_seg_size() call into i915_driver_hw_probe() - Chris
Wilson
Xiaolin Zhang [Fri, 23 Aug 2019 06:57:31 +0000 (14:57 +0800)]
drm/i915: to make vgpu ppgtt notificaiton as atomic operation
vgpu ppgtt notification was split into 2 steps, the first step is to
update PVINFO's pdp register and then write PVINFO's g2v_notify register
with action code to tirgger ppgtt notification to GVT side.
currently these steps were not atomic operations due to no any protection,
so it is easy to enter race condition state during the MTBF, stress and
IGT test to cause GPU hang.
the solution is to add a lock to make vgpu ppgtt notication as atomic
operation.
Chris Wilson [Fri, 23 Aug 2019 23:51:41 +0000 (00:51 +0100)]
drm/i915/selftests: Teach igt_gpu_fill_dw() to take intel_context
Avoid having to pass around (ctx, engine) everywhere by passing the
actual intel_context we intend to use. Today we preach this lesson to
igt_gpu_fill_dw and its callers' callers.
The immediate benefit for the GEM selftests is that we aim to use the
GEM context as the control, the source of the engines on which to test
the GEM context.
Chris Wilson [Fri, 23 Aug 2019 18:14:55 +0000 (19:14 +0100)]
drm/i915: Keep drm_i915_file_private around under RCU
Ensure that the drm_i915_file_private continues to exist as we attempt
to remove a request from its list, which may race with the destruction
of the file.
Recently, in commit 44c22f3f1a0a ("drm/i915: Serialize insertion into the
file->mm.request_list"), we fixed a race on insertion. Now, it appears
we also have a race with destruction!
Chris Wilson [Fri, 23 Aug 2019 15:39:44 +0000 (16:39 +0100)]
drm/i915: Flush the existing fence before GGTT read/write
Our fence management is lazy, very lazy. If the user marks an object as
untiled, we do not immediately flush the fence but merely mark it as
dirty. On the next use we have to remember to check and remove the fence,
by which time we hope it is idle and we do not have to wait.
v2: Throw away the old fence on the next ggtt_pin.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111468 Fixes: 1f7fd484fff1 ("drm/i915: Replace i915_vma_put_fence()") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190823153944.20630-1-chris@chris-wilson.co.uk
In order for the Braswell top-level PD to remain the same from the time
of request construction to its submission onto HW, as we may be
asynchronously rewriting the page tables (thus changing the expected
register state after having already stored the old addresses in the
request), the top level PD must be preallocated.
So wave goodbye to our lazy allocation of those 4x2 pages.
v2: A little bit of write-flushing required (presumably it always has
been required, but now we are more susceptible and it is showing up!)
v3: Put back the forced-PD-reload on every batch, we can't survive
without it and explicitly marking the context for PD reload makes
Braswell turn nasty.
Chris Wilson [Fri, 23 Aug 2019 13:26:46 +0000 (14:26 +0100)]
drm/i915: Hold irq-off for the entire fake lock period
Sadly lockdep records when the irqs are re-enabled and then marks up the
fake lock as being irq-unsafe. Our hand is forced and so we must mark up
the entire fake lock critical section as irq-off.
Hopefully this is the last tweak required!
v2: Not quite, we need to mark the timeline spinlock as irqsafe. That
was a genuine bug being hidden by the earlier lockdep splat.
Fixes: d67739268cf0 ("drm/i915/gt: Mark up the nested engine-pm timeline lock as irqsafe") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190823132700.25286-2-chris@chris-wilson.co.uk
Ville Syrjälä [Wed, 21 Aug 2019 17:30:33 +0000 (20:30 +0300)]
drm/i915: Use hweight8() for 8bit masks
Use hweight8() instead of hweight32() for 8bit masks. Doesn't actually
matter for us since the arch code will go for hweight32() anyway, but
maybe we stil want to do this for documentation purposes?
Ville Syrjälä [Wed, 21 Aug 2019 17:30:29 +0000 (20:30 +0300)]
drm/i915: Use enum pipe instead of crtc index to track active pipes
We may need to eliminate the crtc->index == pipe assumptions from
the code to support arbitrary pipes being fused off. Start that by
switching some bitmasks over to using pipe instead of the crtc index.
Stuart Summers [Fri, 23 Aug 2019 16:03:07 +0000 (09:03 -0700)]
drm/i915: Expand subslice mask
Currently, the subslice_mask runtime parameter is stored as an
array of subslices per slice. Expand the subslice mask array to
better match what is presented to userspace through the
I915_QUERY_TOPOLOGY_INFO ioctl. The index into this array is
then calculated:
slice * subslice stride + subslice index / 8
v2: Fix 32-bit build
v3: Use new helper function in SSEU workaround warning message
v4: Use GEM_BUG_ON to force developers to use valid SSEU configurations
per platform (Chris)
Stuart Summers [Fri, 23 Aug 2019 16:03:06 +0000 (09:03 -0700)]
drm/i915: Add new function to copy subslices for a slice
Add a new function to copy subslices for a specified slice
between intel_sseu structures for the purpose of determining
power-gate status. Note that currently ss_stride has a max
of 1.
Stuart Summers [Fri, 23 Aug 2019 16:03:03 +0000 (09:03 -0700)]
drm/i915: Use subslice stride to set subslices for a given slice
Add a subslice stride calculation when setting subslices. This
aligns more closely with the userspace expectation of the subslice
mask structure.
v2: Use local variable for subslice_mask on HSW and
clean up a few other subslice_mask local variable
changes
v3: Add GEM_BUG_ON for ss_stride to prevent array overflow (Chris)
Split main set function and refactors in intel_device_info.c
into separate patches (Chris)
v4: Reduce ss_stride size check when setting subslices per slice
based on actual expected max stride (Chris)
Move that GEM_BUG_ON check for the ss_stride out to the patch
which adds the ss_stride
v5: Use memcpy instead of looping through each stride index
Stuart Summers [Fri, 23 Aug 2019 16:03:01 +0000 (09:03 -0700)]
drm/i915: Use local variables for subslice_mask for device info
When setting up subslice_mask, instead of operating on the slice
array directly, use a local variable to start bits per slice, then
use this to set the per slice array in one step.
Stuart Summers [Fri, 23 Aug 2019 16:02:59 +0000 (09:02 -0700)]
drm/i915: Add subslice stride runtime parameter
Add a new parameter, ss_stride, to the runtime info
structure. This is used to mirror the userspace concept
of subslice stride, which is a range of subslices per slice.
This patch simply adds the definition and updates usage
in the QUERY_TOPOLOGY_INFO handler.
v2: Add GEM_BUG_ON to make sure ss_stride is valid
Michel Thierry [Fri, 23 Aug 2019 08:20:34 +0000 (01:20 -0700)]
drm/i915/tgl: Enable VD HCP/MFX sub-pipe power gating
HCP/MFX power gating is disabled by default, turn it on for the vd units
available. User space will also issue a MI_FORCE_WAKEUP properly to
wake up proper subwell.
During driver load, init_clock_gating happens after device_info_init_mmio
read the vdbox disable fuse register, so only present vd units will have
these enabled.
Michel Thierry [Fri, 23 Aug 2019 08:20:33 +0000 (01:20 -0700)]
drm/i915/tgl: Move GTCR register to cope with GAM MMIO address remap
GAM registers located in the 0x4xxx range have been relocated to 0xCxxx;
this is to make space for global MOCS registers.
v2: Rename register and bitfield to its new name (suggested by Mika)
HSD: 399379 Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Michel Thierry <michel.thierry@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190823082055.5992-2-lucas.demarchi@intel.com
Manasi Navare [Wed, 21 Aug 2019 21:59:50 +0000 (14:59 -0700)]
drm/i915/dp: Fix DSC enable code to use cpu_transcoder instead of encoder->type
This patch fixes the intel_configure_pps_for_dsc_encoder() function to use
cpu_transcoder instead of encoder->type to select the correct DSC registers
that was wrongly used in the original patch for one DSC register isntance.
Fixes: 7182414e2530 ("drm/i915/dp: Configure i915 Picture parameter Set registers during DSC enabling") Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.0+ Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190821215950.24223-1-manasi.d.navare@intel.com
Anusha Srivatsa [Tue, 20 Aug 2019 22:30:59 +0000 (15:30 -0700)]
drm/dp/dsc: Add Support for all BPCs supported by TGL
DSC engine on ICL supports only 8 and 10 BPC as the input
BPC. But DSC engine in TGL supports 8, 10 and 12 BPC.
Add 12 BPC support for DSC while calculating compression
configuration.
v2: Remove the separate define TGL_DP_DSC_MAX_SUPPORTED_BPC
and use the value directly.(More such defines can be removed
as part of future patches). (Ville)
v3: Use values directly instead of accessing the defines
everytime for min and max DSC BPC.
drm/i915: Do not unmask PSR interruption in IRQ postinstall
No need to unmask PSR interrutpion if PSR is not enabled, better move
the call to intel_psr_enable_source().
v2: Renamed intel_psr_irq_control() to psr_irq_control() (Lucas)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190820223325.27490-3-jose.souza@intel.com
According to PSR2_CTL definition in BSpec there is only one instance
of PSR2_CTL. Platforms gen < 12 with EDP transcoder only support PSR2
on TRANSCODER_EDP while on TGL PSR2 is only supported by
TRANSCODER_A.
Since BDW PSR is allowed on any port, but we need to restrict by
transcoder.
v8: Renamed _psr2_supported_in_trans() to psr2_supported() (Lucas)
v9: Renamed psr2_supported() to transcoder_has_psr2() (Ville)
BSpec: 7713
BSpec: 20584 Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190820223325.27490-2-jose.souza@intel.com
drm/i915/psr: Make PSR registers relative to transcoders
PSR registers are a mess, some have the full address while others just
have the additional offset from psr_mmio_base.
For BDW+ psr_mmio_base is nothing more than TRANSCODER_EDP_OFFSET +
0x800 and using it makes more difficult for people with an PSR
register address or PSR register name from from BSpec as i915 also
don't match the BSpec names.
For HSW psr_mmio_base is _DDI_BUF_CTL_A + 0x800 and PSR registers are
only available in DDIA.
Other reason to make relative to transcoder is that since BDW every
transcoder have PSR registers, so in theory it should be possible to
have PSR enabled in a non-eDP transcoder.
So for BDW+ we can use _TRANS2() to get the register offset of any
PSR register in any transcoder while for HSW we have _HSW_PSR_ADJ
that will calculate the register offset for the single PSR instance,
noting that we are already guarded about trying to enable PSR in other
port than DDIA on HSW by the 'if (dig_port->base.port != PORT_A)' in
intel_psr_compute_config(), this check should only be valid for HSW
and will be changed in future.
PSR2 registers and PSR_EVENT was added after Haswell so that is why
_PSR_ADJ() is not used in some macros.
The only registers that can not be relative to transcoder are
PSR_IMR and PSR_IIR that are not relative to anything, so keeping it
hardcoded. That changed for TGL but it will be handled in another
patch.
Also removing BDW_EDP_PSR_BASE from GVT because it is not used as it
is the only PSR register that GVT have.
v5:
- Macros changed to be more explicit about HSW (Dhinakaran)
- Squashed with the patch that added the tran parameter to the
macros (Dhinakaran)
v6:
- Checking for interruption errors after module reload in the
transcoder that will be used (Dhinakaran)
- Using lowercase to the registers offsets
v7:
- Removing IS_HASWELL() from registers macros(Jani)
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190820223325.27490-1-jose.souza@intel.com
Chris Wilson [Thu, 22 Aug 2019 06:59:17 +0000 (07:59 +0100)]
drm/i915: Kill the undead i915_gem_batch_pool.c
You have to cut it off at the neck, otherwise it just reappears in the
next merge, like it did in commit 3f866026f0ce ("Merge drm/drm-next
into drm-intel-next-queued")
Chris Wilson [Thu, 22 Aug 2019 06:15:57 +0000 (07:15 +0100)]
drm/i915: Replace i915_vma_put_fence()
Avoid calling i915_vma_put_fence() by using our alternate paths that
bind a secondary vma avoiding the original fenced vma. For the few
instances where we need to release the fence (i.e. on binding when the
GGTT range becomes invalid), replace the put_fence with a revoke_fence.
Chris Wilson [Thu, 22 Aug 2019 06:09:13 +0000 (07:09 +0100)]
drm/i915: Pull obj->userfault tracking under the ggtt->mutex
Since we want to revoke the ggtt vma from only under the ggtt->mutex, we
need to move protection of the userfault tracking from the struct_mutex
to the ggtt->mutex.
Chris Wilson [Thu, 22 Aug 2019 06:09:12 +0000 (07:09 +0100)]
drm/i915: Track ggtt fence reservations under its own mutex
We can reduce the locking for fence registers from the dev->struct_mutex
to a local mutex. We could introduce a mutex for the sole purpose of
tracking the fence acquisition, except there is a little bit of overlap
with the fault tracking, so use the i915_ggtt.mutex as it covers both.
Rodrigo Vivi [Thu, 22 Aug 2019 05:47:35 +0000 (22:47 -0700)]
Merge drm/drm-next into drm-intel-next-queued
We need the rename of reservation_object to dma_resv.
The solution on this merge came from linux-next:
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Wed, 14 Aug 2019 12:48:39 +1000
Subject: [PATCH] drm: fix up fallout from "dma-buf: rename reservation_object to dma_resv"
- if (reservation_object_trylock(resv)) {
- reservation_object_add_excl_fence(resv, NULL);
- reservation_object_unlock(resv);
+ if (dma_resv_trylock(resv)) {
+ dma_resv_add_excl_fence(resv, NULL);
+ dma_resv_unlock(resv);
}
err = i915_gem_object_pin_pages(node->obj);
which is a simplified version from a previous one which had: Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Dave Airlie [Thu, 22 Aug 2019 03:21:16 +0000 (13:21 +1000)]
Merge branch 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux into drm-next
Most importantly per-process address spaces on GPUs that are capable of
providing proper isolation has finished baking. This is the base for
our softpin implementation, which allows us to support the texture
descriptor buffers used by GC7000 series GPUs without a major UAPI
extension/rework.
Shortlog of notable changes:
- code cleanup from Fabio
- fix performance counters on GC880 and GC2000 GPUs from Christian
- drmP.h header removal from Sam
- per process address space support on MMUv2 GPUs from me
- softpin support from me
Chris Wilson [Wed, 21 Aug 2019 19:38:51 +0000 (20:38 +0100)]
drm/i915/selftests: Fixup a couple of missing serialisation with vma
In commit 70d6894d1456 ("drm/i915: Serialize against vma moves")
I managed to miss a couple of i915_vma_move_to_active() that had not
serialised against an async vma pinning. Add the missing
i915_request_await.
Four drm_mm_node are used to reserve guest ggtt space, but some of them
may be skipped and not initialised due to space constraints in
intel_vgt_balloon(). If drm_mm_remove_node() is called with
uninitialized drm_mm_node, the above call trace occurs.
This patch check drm_mm_node's validity before calling
drm_mm_remove_node().
Fixes: ff8f797557c7("drm/i915: return the correct usable aperture size under gvt environment") Cc: stable@vger.kernel.org Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com> Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/1566279978-9659-1-git-send-email-xiong.y.zhang@intel.com
Ville Syrjälä [Tue, 20 Aug 2019 16:16:57 +0000 (19:16 +0300)]
drm/i915: Do not create a new max_bpc prop for MST connectors
We're not allowed to create new properties after device registration
so for MST connectors we need to either create the max_bpc property
earlier, or we reuse one we already have. Let's do the latter apporach
since the corresponding SST connector already has the prop and its
min/max are correct also for the MST connector.
The problem was highlighted by commit 4f5368b5541a ("drm/kms:
Catch mode_object lifetime errors") which results in the following
spew:
[ 1330.878941] WARNING: CPU: 2 PID: 1554 at drivers/gpu/drm/drm_mode_object.c:45 __drm_mode_object_add+0xa0/0xb0 [drm]
...
[ 1330.879008] Call Trace:
[ 1330.879023] drm_property_create+0xba/0x180 [drm]
[ 1330.879036] drm_property_create_range+0x15/0x30 [drm]
[ 1330.879048] drm_connector_attach_max_bpc_property+0x62/0x80 [drm]
[ 1330.879086] intel_dp_add_mst_connector+0x11f/0x140 [i915]
[ 1330.879094] drm_dp_add_port.isra.20+0x20b/0x440 [drm_kms_helper]
...
Cc: stable@vger.kernel.org Cc: Lyude Paul <lyude@redhat.com> Cc: sunpeng.li@amd.com Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sean Paul <sean@poorly.run> Fixes: 5ca0ef8a56b8 ("drm/i915: Add max_bpc property for DP MST") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190820161657.9658-1-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com>
Chris Wilson [Wed, 21 Aug 2019 14:23:36 +0000 (15:23 +0100)]
drm/i915/execlists: Set priority hint prior to submission
Since we now run process_csb() outside of the engine->active.lock, we
can process a CS-event immediately upon our ELSP write. As we currently
inspect the pending queue *after* the ELSP write, there is an
opportunity for a CS-event to update the pending queue before we can
read it, making ourselves chases an invalid pointer.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111427 Fixes: df403069029d ("drm/i915/execlists: Lift process_csb() out of the irq-off spinlock") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190821142336.21609-1-chris@chris-wilson.co.uk
Chris Wilson [Wed, 21 Aug 2019 12:32:34 +0000 (13:32 +0100)]
drm/i915: Replace PIN_NONFAULT with calls to PIN_NOEVICT
When under severe stress for GTT mappable space, the LRU eviction model
falls off a cliff. We spend all our time scanning the much larger
non-mappable area searching for something within the mappable zone we can
evict. Turn this on its head by only using the full vma for the object if
it is already pinned in the mappable zone or there is sufficient *free*
space to accommodate it (prioritizing speedy reuse). If there is not,
immediately fall back to using small chunks (tilerow for GTT mmap, single
pages for pwrite/relocation) and using random eviction before doing a full
search.
Chris Wilson [Wed, 21 Aug 2019 04:20:44 +0000 (05:20 +0100)]
drm/i915/gtt: Relax assertion for pt_used
When inserting the final level PTE, we check that we are not overflowing
the page table (checking that pt_used does not exceed the size of the
table). However, we have to allow for every other PTE to be pinned by a
simultaneous removal thread (as on remove we bump the pt_used counter
before adjusting the table).
Dave Airlie [Wed, 21 Aug 2019 05:38:43 +0000 (15:38 +1000)]
Merge tag 'drm-misc-next-2019-08-19' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.4:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- dma-buf: add reservation_object_fences helper, relax
reservation_object_add_shared_fence, remove
reservation_object seq number (and then
restored)
- dma-fence: Shrinkage of the dma_fence structure,
Merge dma_fence_signal and dma_fence_signal_locked,
Store the timestamp in struct dma_fence in a union with
cb_list
Driver Changes:
- More dt-bindings YAML conversions
- More removal of drmP.h includes
- dw-hdmi: Support get_eld and various i2s improvements
- gm12u320: Few fixes
- meson: Global cleanup
- panfrost: Few refactors, Support for GPU heap allocations
- sun4i: Support for DDC enable GPIO
- New panels: TI nspire, NEC NL8048HL11, LG Philips LB035Q02,
Sharp LS037V7DW01, Sony ACX565AKM, Toppoly TD028TTEC1
Toppoly TD043MTEA1
Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: fixup dma_resv rename fallout]
drm/i915/tgl: Move transcoders to pipes' powerwells
When trying to read registers from transcoder C and D while PG3 is ON it
causes unclaimed access warnings. Adding the powerwells for the pipes
fixes the issue, but doesn't match the spec.
Lucas De Marchi [Wed, 14 Aug 2019 23:55:17 +0000 (16:55 -0700)]
drm/i915/tgl: disable DDIC
The current SKUs added for Tiger Lake don't have DDIC hooked up, even
though it is supported by the SoC. The current state for these SKUs is
problematic since while enabling the combo phy, PORT_COMP_DW* return
0xFFFFFFFF, which is invalid per register definition.
During initialization we check what phys are not yet enabled by reading
PHY_MISC_C and try to enable it by toggling the "DE to IO Comp Pwr Down"
bit. But after that any read to the PORT_COMP_DW* returns invalid
results. This removes the following warning
We may or may not need to change the implementation to account for DDIC
being available on other SKUs. For now I think the best thing to do is
to just disable the port.
Chris Wilson [Tue, 20 Aug 2019 14:12:18 +0000 (15:12 +0100)]
drm/i915/gtt: Relax pd_used assertion
The current assertion tries to make sure that we do not over count the
number of used PDE inside a page directory -- that is with an array of
512 pde, we do not expect more than 512 elements used! However, our
assertion has to take into account that as we pin an element into the
page directory, the caller first pins the page directory so the usage
count is one higher. However, this should be one extra pin per thread,
and the upper bound is that we may have one thread for each entry.
drm/i915: Dynamically allocate s0ix struct for VLV
This is only required for a single platform so no need to reserve the
memory on all of them.
This removes the last direct dependency of i915_drv.h on i915_reg.h
(apart from the i915_reg_t definition).
v2: drop unneeded diff, keep the vlv prefix, call functions
unconditionally (Jani), fwd declaration of the struct (Chris)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190820020147.5667-1-daniele.ceraolospurio@intel.com
Michel Thierry [Sat, 17 Aug 2019 09:38:54 +0000 (02:38 -0700)]
drm/i915/tgl: Updated Private PAT programming
Gen12 removes the target-cache and age fields from the private PAT
because MOCS now have the capability to set these itself. Only memory-type
field should be programmed in the ppat, the reminded bits are reserved.
Since now there are only 4 possible combinations, we could set only 4
PPAT and leave the reminded 4 as UC, but I left them as WB as we used
to have before.
Also these registers have been relocated to the 0x4800-0x481c range.
HSDES: 1406402661
BSpec: 31654 Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190817093902.2171-33-lucas.demarchi@intel.com
Lucas De Marchi [Sat, 17 Aug 2019 09:38:42 +0000 (02:38 -0700)]
drm/i915/tgl: Introduce initial Tiger Lake workarounds
Add empty workaround hooks for Tiger Lake. The workarounds will be added
on separate patches. We were already applying
WaRsForcewakeAddDelayForAck, which is indeed still valid, so also update
the comment.
The CSB format has been reworked for Gen12 to include information on
both the context we're switching away from and the context we're
switching to. After the change, some of the events don't have their
own bit anymore and need to be inferred from other values in the csb.
One of the context IDs (0x7FF) has also been reserved to indicate
the invalid ctx, i.e. engine idle.
Note that the full context ID includes the SW counter as well, but since
we currently only care if the context is valid or not we can ignore that
part.
v2: fix mask size, fix and expand comments (Tvrtko),
use if-ladder (Chris)
Bspec: 45555, 46144 Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190820102201.29849-1-chris@chris-wilson.co.uk
Like Gen11, Gen12 has 11 available bits for the ctx id field. However,
the last value (0x7FF) is reserved to indicate engine idle, so we
need to reduce the maximum number of contexts by 1 compared to Gen11.
Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190817093902.2171-29-lucas.demarchi@intel.com
Michel Thierry [Wed, 31 Jul 2019 00:49:02 +0000 (17:49 -0700)]
drm/i915/tgl: Report valid VDBoxes with SFC capability
In Gen11, only even numbered "logical" VDBoxes are hooked up to a SFC
(Scaler & Format Converter) unit. This is not the case in Tigerlake,
where each VDBox can access a SFC.
We will use this information to decide when the SFC units need to be reset
and also pass it to the GuC.
Bspec: 48077 Signed-off-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190731004902.34672-5-daniele.ceraolospurio@intel.com
Chris Wilson [Tue, 20 Aug 2019 08:09:07 +0000 (09:09 +0100)]
drm/i915: Serialize insertion into the file->mm.request_list
Currently, we remove the from per-file request list for throttling and
retirement under a dedicated spinlock, but insertion is governed by
struct_mutex. This needs to be the same lock so that the
retirement/insertion of neighbouring requests (at the tail) doesn't
break the list.
Imre Deak [Fri, 16 Aug 2019 09:55:23 +0000 (12:55 +0300)]
drm/i915: Sanitize PHY state during display core uninit
To work around a DMC/Punit issue on ICL where the driver's
ICL_PORT_COMP_DW8/IREFGEN PHY setting is lost when entering/exiting DC6
state, make sure to reinit the PHY whenever disabling DC states.
Similarly the driver's PHY/DBUF/CDCLK settings should have been preserved
across DC5/6 transitions, so check this on all platforms.
This gets rid of the following WARN during suspend:
Combo PHY A HW state changed unexpectedly
Chris Wilson [Mon, 19 Aug 2019 20:07:05 +0000 (21:07 +0100)]
drm/i915: Assume exclusive access to objects inside resume
Inside gtt_restore_mappings() we currently take the obj->resv->lock, but
in the future we need to avoid taking this fs-reclaim tainted lock as we
need to extend the coverage of the vm->mutex. Take advantage of the
single-threaded nature of the early resume phase, and do a single
wbinvd() to flush all the GTT objects en masse.
Chris Wilson [Mon, 19 Aug 2019 18:44:03 +0000 (19:44 +0100)]
drm/i915: Use 0 for the unordered context
Since commit 078dec3326e2 ("dma-buf: add dma_fence_get_stub") the 0
fence context became an impossible match as it is used for an always
signaled fence. We can simplify our timeline tracking by knowing that 0
always means no match.
Matt Roper [Sat, 17 Aug 2019 00:50:41 +0000 (17:50 -0700)]
drm/i915/gen11: Allow usage of all GPIO pins
Our pin mapping tables for ICP and MCC currently only list the standard
GPIO pins used for various output ports. Even through ICP's standard
pin usage only utilizes pins 1, 2, and 9-12, and MCC's standard pin
usage only uses pins 1, 2, and 9, these platforms do still have GPIO
registers to address pins in the range 1-3 and 9-14. OEM's may remap
GPIO usage in non-standard ways (and provide the actual mapping via VBT
settings), so we shouldn't exclude pins on these platforms just because
they aren't part of the standard mappings.
TGP's standard pin tables contains all the possible pins, so let's
rename them to "icp" and use them for all PCH >= PCH_ICP. This will
prevent intel_gmbus_is_valid_pin from rejecting non-standard pin usage
that an OEM specifies via the VBT.
Note that this will cause pin 9 to be labeled as "tc1" instead of "dpc"
in debug messages on platforms with the MCC PCH, but that may actually
help avoid confusion since the text strings will now be the same on all
gen11+ platforms instead of being different on just EHL.
v2: Drop now-unused MCC_DDC_BUS_DDI_* names.
v3: We want to compare against INTEL_PCH_TYPE, not INTEL_PCH_ID.
Bspec: 8417 Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Vivek Kasireddy <vivek.kasireddy@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190817005041.20651-1-matthew.d.roper@intel.com
Chris Wilson [Mon, 19 Aug 2019 07:58:19 +0000 (08:58 +0100)]
drm/i915/gt: Mark up the nested engine-pm timeline lock as irqsafe
We use a fake timeline->mutex lock to reassure lockdep that the timeline
is always locked when emitting requests. However, the use inside
__engine_park() may be inside hardirq and so lockdep now complains about
the mixed irq-state of the nested locked. Disable irqs around the
lockdep tracking to keep it happy.
Fixes: 6c69a45445af ("drm/i915/gt: Mark context->active_count as protected by timeline->mutex") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190819075835.20065-3-chris@chris-wilson.co.uk
Nishka Dasgupta [Tue, 13 Aug 2019 06:27:11 +0000 (11:57 +0530)]
drm/xen-front: Make structure fb_funcs constant
Static structure fb_funcs, of type drm_framebuffer_funcs, is used only
when it is passed to drm_gem_fb_create_with_funcs() as its last
argument. drm_gem_fb_create_with_funcs does not modify its lst argument
(fb_funcs) and hence fb_funcs is never modified. Therefore make fb_funcs
constant to protect it from further modification.
Issue found with Coccinelle.
Chris Wilson [Sat, 17 Aug 2019 23:25:11 +0000 (00:25 +0100)]
drm/i915: Propagate fence errors
Errors spread like wildfire, and must eventually be returned to the
user. They need to be captured and passed along the flow of fences,
infecting each in turn with the existing error, until finally they fall
out of a user visible result.
Michal Wajdeczko [Sun, 18 Aug 2019 09:52:04 +0000 (09:52 +0000)]
drm/i915/uc: Never fail on HuC firmware errors
There is no need to mark whole GPU as wedged just because
of the custom HuC fw failure as users can always verify
actual HuC firmware status using existing HUC_STATUS ioctl.
Michal Wajdeczko [Sun, 18 Aug 2019 09:52:03 +0000 (09:52 +0000)]
drm/i915/uc: Don't always fail on unavailable GuC firmware
If we failed to fetch default GuC firmware and we didn't plan
to use it for the submission and we never have used GuC before
then we may continue normal driver load, no need to declare
GPU wedged (we can use execlist for submission) and it is safe
to run without the HuC (users will check HuC status anyway).
Michal Wajdeczko [Sun, 18 Aug 2019 09:52:02 +0000 (09:52 +0000)]
drm/i915/guc: Don't open log relay if GuC is not running
As we plan to continue driver load after GuC initialization
failure, we can't assume that GuC log data will be available
just because GuC was initially enabled. We must check that
GuC is still running instead.
Nishka Dasgupta [Tue, 13 Aug 2019 06:25:48 +0000 (11:55 +0530)]
drm/vboxvideo: Make structure vbox_fb_helper_funcs constant
The static structure vbox_fb_helper_funcs, of type drm_fb_helper_funcs,
is used only when it is passed as the third argument to
drm_fb_helper_fbdev_setup(), which does not modify it. Hence make it
constant to protect it from unintended modifications.
Issue found with Coccinelle.
Chris Wilson [Sat, 17 Aug 2019 15:30:22 +0000 (16:30 +0100)]
dma-fence: Store the timestamp in the same union as the cb_list
The timestamp and the cb_list are mutually exclusive, the cb_list can
only be added to prior to being signaled (and once signaled we drain),
while the timestamp is only valid upon being signaled. Both the
timestamp and the cb_list are only valid while the fence is alive, and
as soon as no references are held can be replaced by the rcu_head.
By reusing the union for the timestamp, we squeeze the base dma_fence
struct to 64 bytes on x86-64.
Chris Wilson [Sat, 17 Aug 2019 15:23:00 +0000 (16:23 +0100)]
dma-fence: Simply wrap dma_fence_signal_locked with dma_fence_signal
Currently dma_fence_signal() tries to avoid the spinlock and only takes
it if absolutely required to walk the callback list. However, to allow
for some users to surreptitiously insert lazy signal callbacks that
do not depend on enabling the signaling mechanism around every fence,
we always need to notify the callbacks on signaling. As such, we will
always need to take the spinlock and dma_fence_signal() effectively
becomes a clone of dma_fence_signal_locked().
v2: Update the test_and_set_bit() before entering the spinlock.
v3: Drop the test_[and_set]_bit() before the spinlock, it's a caller
error so expected to be very unlikely.
Chris Wilson [Sat, 17 Aug 2019 14:47:34 +0000 (15:47 +0100)]
dma-fence: Avoid list_del during fence->cb_list iteration
Before we notify the fence signal callback, we remove the cb from the
list. However, since we are processing the entire list from underneath
the spinlock, we do not need to individual delete each element, but can
simply reset the link and the entire list.
Chris Wilson [Sat, 17 Aug 2019 14:47:33 +0000 (15:47 +0100)]
dma-fence: Shrink size of struct dma_fence
Rearrange the couple of 32-bit atomics hidden amongst the field of
pointers that unnecessarily caused the compiler to insert some padding,
shrinks the size of the base struct dma_fence from 80 to 72 bytes on
x86-64.
projects / mirror_ubuntu-hirsute-kernel.git / log