Linus Torvalds [Sun, 6 Nov 2022 21:09:52 +0000 (13:09 -0800)]
Merge tag 'cxl-fixes-for-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dan Williams:
"Several fixes for CXL region creation crashes, leaks and failures.
This is mainly fallout from the original implementation of dynamic CXL
region creation (instantiate new physical memory pools) that arrived
in v6.0-rc1.
Given the theme of "failures in the presence of pass-through decoders"
this also includes new regression test infrastructure for that case.
Summary:
- Fix region creation crash with pass-through decoders
- Fix region creation crash when no decoder allocation fails
- Fix region creation crash when scanning regions to enforce the
increasing physical address order constraint that CXL mandates
- Fix a memory leak for cxl_pmem_region objects, track 1:N instead of
1:1 memory-device-to-region associations.
- Fix a memory leak for cxl_region objects when regions with active
targets are deleted
- Fix assignment of NUMA nodes to CXL regions by CFMWS (CXL Window)
emulated proximity domains.
- Fix region creation failure for switch attached devices downstream
of a single-port host-bridge
- Fix false positive memory leak of cxl_region objects by recycling
recently used region ids rather than freeing them
- Add regression test infrastructure for a pass-through decoder
configuration
- Fix some mailbox payload handling corner cases"
* tag 'cxl-fixes-for-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/region: Recycle region ids
cxl/region: Fix 'distance' calculation with passthrough ports
tools/testing/cxl: Add a single-port host-bridge regression config
tools/testing/cxl: Fix some error exits
cxl/pmem: Fix cxl_pmem_region and cxl_memdev leak
cxl/region: Fix cxl_region leak, cleanup targets at region delete
cxl/region: Fix region HPA ordering validation
cxl/pmem: Use size_add() against integer overflow
cxl/region: Fix decoder allocation crash
ACPI: NUMA: Add CXL CFMWS 'nodes' to the possible nodes set
cxl/pmem: Fix failure to account for 8 byte header for writes to the device LSA.
cxl/region: Fix null pointer dereference due to pass through decoder commit
cxl/mbox: Add a check on input payload size
Linus Torvalds [Sun, 6 Nov 2022 20:59:12 +0000 (12:59 -0800)]
Merge tag 'hwmon-for-v6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"Fix two regressions:
- Commit 54cc3dbfc10d ("hwmon: (pmbus) Add regulator supply into
macro") resulted in regulator undercount when disabling regulators.
Revert it.
- The thermal subsystem rework caused the scmi driver to no longer
register with the thermal subsystem because index values no longer
match. To fix the problem, the scmi driver now directly registers
with the thermal subsystem, no longer through the hwmon core"
* tag 'hwmon-for-v6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
Revert "hwmon: (pmbus) Add regulator supply into macro"
hwmon: (scmi) Register explicitly with Thermal Framework
Linus Torvalds [Sun, 6 Nov 2022 20:41:32 +0000 (12:41 -0800)]
Merge tag 'perf_urgent_for_v6.1_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Add Cooper Lake's stepping to the PEBS guest/host events isolation
fixed microcode revisions checking quirk
- Update Icelake and Sapphire Rapids events constraints
- Use the standard energy unit for Sapphire Rapids in RAPL
- Fix the hw_breakpoint test to fail more graciously on !SMP configs
* tag 'perf_urgent_for_v6.1_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Add Cooper Lake stepping to isolation_ucodes[]
perf/x86/intel: Fix pebs event constraints for SPR
perf/x86/intel: Fix pebs event constraints for ICL
perf/x86/rapl: Use standard Energy Unit for SPR Dram RAPL domain
perf/hw_breakpoint: test: Skip the test if dependencies unmet
Linus Torvalds [Sun, 6 Nov 2022 20:36:47 +0000 (12:36 -0800)]
Merge tag 'x86_urgent_for_v6.1_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Add new Intel CPU models
- Enforce that TDX guests are successfully loaded only on TDX hardware
where virtualization exception (#VE) delivery on kernel memory is
disabled because handling those in all possible cases is "essentially
impossible"
- Add the proper include to the syscall wrappers so that BTF can see
the real pt_regs definition and not only the forward declaration
* tag 'x86_urgent_for_v6.1_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add several Intel server CPU model numbers
x86/tdx: Panic on bad configs that #VE on "private" memory access
x86/tdx: Prepare for using "INFO" call for a second purpose
x86/syscall: Include asm/ptrace.h in syscall_wrapper header
Linus Torvalds [Sun, 6 Nov 2022 20:23:10 +0000 (12:23 -0800)]
Merge tag 'kbuild-fixes-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Use POSIX-compatible grep options
- Document git-related tips for reproducible builds
- Fix a typo in the modpost rule
- Suppress SIGPIPE error message from gcc-ar and llvm-ar
- Fix segmentation fault in the menuconfig search
* tag 'kbuild-fixes-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: fix segmentation fault in menuconfig search
kbuild: fix SIGPIPE error message for AR=gcc-ar and AR=llvm-ar
kbuild: fix typo in modpost
Documentation: kbuild: Add description of git for reproducible builds
kbuild: use POSIX-compatible grep option
Linus Torvalds [Sun, 6 Nov 2022 18:46:59 +0000 (10:46 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix the pKVM stage-1 walker erronously using the stage-2 accessor
- Correctly convert vcpu->kvm to a hyp pointer when generating an
exception in a nVHE+MTE configuration
- Check that KVM_CAP_DIRTY_LOG_* are valid before enabling them
- Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE
- Document the boot requirements for FGT when entering the kernel at
EL1
x86:
- Use SRCU to protect zap in __kvm_set_or_clear_apicv_inhibit()
- Make argument order consistent for kvcalloc()
- Userspace API fixes for DEBUGCTL and LBRs"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Fix a typo about the usage of kvcalloc()
KVM: x86: Use SRCU to protect zap in __kvm_set_or_clear_apicv_inhibit()
KVM: VMX: Ignore guest CPUID for host userspace writes to DEBUGCTL
KVM: VMX: Fold vmx_supported_debugctl() into vcpu_supported_debugctl()
KVM: VMX: Advertise PMU LBRs if and only if perf supports LBRs
arm64: booting: Document our requirements for fine grained traps with SME
KVM: arm64: Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE
KVM: Check KVM_CAP_DIRTY_LOG_{RING, RING_ACQ_REL} prior to enabling them
KVM: arm64: Fix bad dereference on MTE-enabled systems
KVM: arm64: Use correct accessor to parse stage-1 PTEs
Linus Torvalds [Sun, 6 Nov 2022 18:42:29 +0000 (10:42 -0800)]
Merge tag 'for-linus-6.1-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"One fix for silencing a smatch warning, and a small cleanup patch"
* tag 'for-linus-6.1-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: simplify sysenter and syscall setup
x86/xen: silence smatch warning in pmu_msr_chk_emulated()
Linus Torvalds [Sun, 6 Nov 2022 18:30:29 +0000 (10:30 -0800)]
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix a number of bugs, including some regressions, the most serious of
which was one which would cause online resizes to fail with file
systems with metadata checksums enabled.
Also fix a warning caused by the newly added fortify string checker,
plus some bugs that were found using fuzzed file systems"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix fortify warning in fs/ext4/fast_commit.c:1551
ext4: fix wrong return err in ext4_load_and_init_journal()
ext4: fix warning in 'ext4_da_release_space'
ext4: fix BUG_ON() when directory entry has invalid rec_len
ext4: update the backup superblock's at the end of the online resize
Linus Torvalds [Sun, 6 Nov 2022 18:19:39 +0000 (10:19 -0800)]
Merge tag '6.1-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"One symlink handling fix and two fixes foir multichannel issues with
iterating channels, including for oplock breaks when leases are
disabled"
* tag '6.1-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix use-after-free on the link name
cifs: avoid unnecessary iteration of tcp sessions
cifs: always iterate smb sessions using primary channel
Linus Torvalds [Sun, 6 Nov 2022 17:57:38 +0000 (09:57 -0800)]
Merge tag 'trace-v6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull `lTracing fixes for 6.1-rc3:
- Fixed NULL pointer dereference in the ring buffer wait-waiters code
for machines that have less CPUs than what nr_cpu_ids returns.
The buffer array is of size nr_cpu_ids, but only the online CPUs get
initialized.
- Fixed use after free call in ftrace_shutdown.
- Fix accounting of if a kprobe is enabled
- Fix NULL pointer dereference on error path of fprobe rethook_alloc().
- Fix unregistering of fprobe_kprobe_handler
- Fix memory leak in kprobe test module
* tag 'trace-v6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: kprobe: Fix memory leak in test_gen_kprobe/kretprobe_cmd()
tracing/fprobe: Fix to check whether fprobe is registered correctly
fprobe: Check rethook_alloc() return in rethook initialization
kprobe: reverse kp->flags when arm_kprobe failed
ftrace: Fix use-after-free for dynamic ftrace_ops
ring-buffer: Check for NULL cpu_buffer in ring_buffer_wake_waiters()
Jason Yan [Tue, 25 Oct 2022 04:02:06 +0000 (12:02 +0800)]
ext4: fix wrong return err in ext4_load_and_init_journal()
The return value is wrong in ext4_load_and_init_journal(). The local
variable 'err' need to be initialized before goto out. The original code
in __ext4_fill_super() is fine because it has two return values 'ret'
and 'err' and 'ret' is initialized as -EINVAL. After we factor out
ext4_load_and_init_journal(), this code is broken. So fix it by directly
returning -EINVAL in the error handler path.
Cc: stable@kernel.org Fixes: 9c1dd22d7422 ("ext4: factor out ext4_load_and_init_journal()") Signed-off-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20221025040206.3134773-1-yanaijie@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Above issue may happens as follows:
ext4_da_write_begin
ext4_create_inline_data
ext4_clear_inode_flag(inode, EXT4_INODE_EXTENTS);
ext4_set_inode_flag(inode, EXT4_INODE_INLINE_DATA);
__ext4_ioctl
ext4_ext_migrate -> will lead to eh->eh_entries not zero, and set extent flag
ext4_da_write_begin
ext4_da_convert_inline_data_to_extent
ext4_da_write_inline_data_begin
ext4_da_map_blocks
ext4_insert_delayed_block
if (!ext4_es_scan_clu(inode, &ext4_es_is_delonly, lblk))
if (!ext4_es_scan_clu(inode, &ext4_es_is_mapped, lblk))
ext4_clu_mapped(inode, EXT4_B2C(sbi, lblk)); -> will return 1
allocated = true;
ext4_es_insert_delayed_block(inode, lblk, allocated);
ext4_writepages
mpage_map_and_submit_extent(handle, &mpd, &give_up_on_write); -> return -ENOSPC
mpage_release_unused_pages(&mpd, give_up_on_write); -> give_up_on_write == 1
ext4_es_remove_extent
ext4_da_release_space(inode, reserved);
if (unlikely(to_free > ei->i_reserved_data_blocks))
-> to_free == 1 but ei->i_reserved_data_blocks == 0
-> then trigger warning as above
To solve above issue, forbid inode do migrate which has inline data.
Cc: stable@kernel.org Reported-by: syzbot+c740bb18df70ad00952e@syzkaller.appspotmail.com Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20221018022701.683489-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Luís Henriques [Wed, 12 Oct 2022 13:13:30 +0000 (14:13 +0100)]
ext4: fix BUG_ON() when directory entry has invalid rec_len
The rec_len field in the directory entry has to be a multiple of 4. A
corrupted filesystem image can be used to hit a BUG() in
ext4_rec_len_to_disk(), called from make_indexed_dir().
Linus Torvalds [Sat, 5 Nov 2022 19:10:25 +0000 (12:10 -0700)]
Merge tag 'acpi-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Add StorageD3Enable quirk for Dell Inspiron 16 5625 (Mario
Limonciello)"
* tag 'acpi-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: x86: Add another system to quirk list for forcing StorageD3Enable
- Explicitly clear the last request in a chain when the plug is
flushed, as it may have already been issued (Al)
* tag 'block-6.1-2022-11-05' of git://git.kernel.dk/linux:
block: blk_add_rq_to_plug(): clear stale 'last' after flush
blk-mq: Fix kmemleak in blk_mq_init_allocated_queue
block: Fix possible memory leak for rq_wb on add_disk failure
ublk_drv: add ublk_queue_cmd() for cleanup
ublk_drv: avoid to touch io_uring cmd in blk_mq io path
ublk_drv: comment on ublk_driver entry of Kconfig
ublk_drv: return flag of UBLK_F_URING_CMD_COMP_IN_TASK in case of module
When opened a symlink, link name is from 'inode->i_link', but it may be
reset to a new value when revalidate the dentry. If some processes get the
link name on the race scenario, then UAF will happen on link name.
Fix this by implementing 'get_link' interface to duplicate the link name.
Fixes: 76894f3e2f71 ("cifs: improve symlink handling for smb2+") Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
Shyam Prasad N [Fri, 28 Oct 2022 10:01:45 +0000 (10:01 +0000)]
cifs: avoid unnecessary iteration of tcp sessions
In a few places, we do unnecessary iterations of
tcp sessions, even when the server struct is provided.
The change avoids it and uses the server struct provided.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
Shyam Prasad N [Fri, 28 Oct 2022 09:52:26 +0000 (09:52 +0000)]
cifs: always iterate smb sessions using primary channel
smb sessions and tcons currently hang off primary channel only.
Secondary channels have the lists as empty. Whenever there's a
need to iterate sessions or tcons, we should use the list in the
corresponding primary channel.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
Linus Torvalds [Sat, 5 Nov 2022 02:52:24 +0000 (19:52 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Avoid kprobe recursion when cortex_a76_erratum_1463225_debug_handler()
is not inlined (change to __always_inline).
- Fix the visibility of compat hwcaps, broken by recent changes to
consolidate the visibility of hwcaps and the user-space view of the
ID registers.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: cpufeature: Fix the visibility of compat hwcaps
arm64: entry: avoid kprobe recursion
Zev Weiss reports that the reverted patch may cause a regulator
undercount. Here is his report:
... having regulator-dummy set as a supply on my PMBus regulators
(instead of having them as their own top-level regulators without
an upstream supply) leads to enable-count underflow errors when
disabling them:
# echo 0 > /sys/bus/platform/devices/efuse01/state
[ 906.094477] regulator-dummy: Underflow of regulator enable count
[ 906.100563] Failed to disable vout: -EINVAL
[ 136.992676] reg-userspace-consumer efuse01: Failed to configure state: -22
Zev reports that reverting the patch fixes the problem. So let's do that
for now.
Cristian Marussi [Mon, 31 Oct 2022 11:40:18 +0000 (11:40 +0000)]
hwmon: (scmi) Register explicitly with Thermal Framework
Available sensors are enumerated and reported by the SCMI platform server
using a 16bit identification number; not all such sensors are of a type
supported by hwmon subsystem and, among the supported ones, only a subset
could be temperature sensors that have to be registered with the Thermal
Framework.
Potential clashes between hwmon channels indexes and the underlying real
sensors IDs do not play well with the hwmon<-->thermal bridge automatic
registration routines and could need a sensible number of fake dummy
sensors to be made up in order to keep indexes and IDs in sync.
Avoid to use the hwmon<-->thermal bridge dropping the HWMON_C_REGISTER_TZ
attribute and instead explicit register temperature sensors directly with
the Thermal Framework.
Dan Williams [Fri, 4 Nov 2022 00:31:00 +0000 (17:31 -0700)]
cxl/region: Recycle region ids
At region creation time the next region-id is atomically cached so that
there is predictability of region device names. If that region is
destroyed and then a new one is created the region id increments. That
ends up looking like a memory leak, or is otherwise surprising that
identifiers roll forward even after destroying all previously created
regions.
Try to reuse rather than free old region ids at region release time.
While this fixes a cosmetic issue, the needlessly advancing memory
region-id gives the appearance of a memory leak, hence the "Fixes" tag,
but no "Cc: stable" tag.
Cc: Ben Widawsky <bwidawsk@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Fixes: 779dd20cfb56 ("cxl/region: Add region creation support") Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/166752186062.947915.13200195701224993317.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Fri, 4 Nov 2022 00:30:54 +0000 (17:30 -0700)]
cxl/region: Fix 'distance' calculation with passthrough ports
When programming port decode targets, the algorithm wants to ensure that
two devices are compatible to be programmed as peers beneath a given
port. A compatible peer is a target that shares the same dport, and
where that target's interleave position also routes it to the same
dport. Compatibility is determined by the device's interleave position
being >= to distance. For example, if a given dport can only map every
Nth position then positions less than N away from the last target
programmed are incompatible.
The @distance for the host-bridge's cxl_port in a simple dual-ported
host-bridge configuration with 2 direct-attached devices is 1, i.e. An
x2 region divided by 2 dports to reach 2 region targets.
An x4 region under an x2 host-bridge would need 2 intervening switches
where the @distance at the host bridge level is 2 (x4 region divided by
2 switches to reach 4 devices).
However, the distance between peers underneath a single ported
host-bridge is always zero because there is no limit to the number of
devices that can be mapped. In other words, there are no decoders to
program in a passthrough, all descendants are mapped and distance only
starts matters for the intervening descendant ports of the passthrough
port.
Add tracking for the number of dports mapped to a port, and use that to
detect the passthrough case for calculating @distance.
Dan Williams [Fri, 4 Nov 2022 00:30:48 +0000 (17:30 -0700)]
tools/testing/cxl: Add a single-port host-bridge regression config
Jonathan reports that region creation fails when a single-port
host-bridge connects to a multi-port switch. Mock up that configuration
so a fix can be tested and regression tested going forward.
Dan Williams [Fri, 4 Nov 2022 00:30:36 +0000 (17:30 -0700)]
cxl/pmem: Fix cxl_pmem_region and cxl_memdev leak
When a cxl_nvdimm object goes through a ->remove() event (device
physically removed, nvdimm-bridge disabled, or nvdimm device disabled),
then any associated regions must also be disabled. As highlighted by the
cxl-create-region.sh test [1], a single device may host multiple
regions, but the driver was only tracking one region at a time. This
leads to a situation where only the last enabled region per nvdimm
device is cleaned up properly. Other regions are leaked, and this also
causes cxl_memdev reference leaks.
Fix the tracking by allowing cxl_nvdimm objects to track multiple region
associations.
Dan Williams [Fri, 4 Nov 2022 00:30:30 +0000 (17:30 -0700)]
cxl/region: Fix cxl_region leak, cleanup targets at region delete
When a region is deleted any targets that have been previously assigned
to that region hold references to it. Trigger those references to
drop by detaching all targets at unregister_region() time.
Otherwise that region object will leak as userspace has lost the ability
to detach targets once region sysfs is torn down.
store_targetN+0x655/0x1740:
alloc_region_ref at drivers/cxl/core/region.c:676
(inlined by) cxl_port_attach_region at drivers/cxl/core/region.c:850
(inlined by) cxl_region_attach at drivers/cxl/core/region.c:1290
(inlined by) attach_target at drivers/cxl/core/region.c:1410
(inlined by) store_targetN at drivers/cxl/core/region.c:1453
Linus Torvalds [Fri, 4 Nov 2022 22:05:42 +0000 (15:05 -0700)]
Merge tag 'xfs-6.1-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"Dave and I had thought that this would be a very quiet cycle, but we
thought wrong.
At first there were the usual trickle of minor bugfixes, but then
Zorro pulled -rc1 and noticed complaints about the stronger memcpy
checks w.r.t. flex arrays.
Analyzing how to fix that revealed a bunch of validation gaps in
validating ondisk log items during recovery, and then a customer hit
an infinite loop in the refcounting code on a corrupt filesystem.
So. This largeish batch of fixes addresses all those problems, I hope.
Summary:
- Fix a UAF bug during log recovery
- Fix memory leaks when mount fails
- Detect corrupt bestfree information in a directory block
- Fix incorrect return value type for the dax page fault handlers
- Fix fortify complaints about memcpy of xfs log item objects
- Strengthen inadequate validation of recovered log items
- Fix infinite loop problems in the refcount code if the refcount
btree node block keys are corrupt
- Fix infinite loop problems in the refcount code if the refcount
btree records suffer MSB bitflips
- Add more sanity checking to continued defer ops to prevent
overflows from one AG to the next or off EOFS"
* tag 'xfs-6.1-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (28 commits)
xfs: rename XFS_REFC_COW_START to _COWFLAG
xfs: fix uninitialized list head in struct xfs_refcount_recovery
xfs: fix agblocks check in the cow leftover recovery function
xfs: check record domain when accessing refcount records
xfs: remove XFS_FIND_RCEXT_SHARED and _COW
xfs: refactor domain and refcount checking
xfs: report refcount domain in tracepoints
xfs: track cow/shared record domains explicitly in xfs_refcount_irec
xfs: refactor refcount record usage in xchk_refcountbt_rec
xfs: dump corrupt recovered log intent items to dmesg consistently
xfs: move _irec structs to xfs_types.h
xfs: actually abort log recovery on corrupt intent-done log items
xfs: check deferred refcount op continuation parameters
xfs: refactor all the EFI/EFD log item sizeof logic
xfs: create a predicate to verify per-AG extents
xfs: fix memcpy fortify errors in EFI log format copying
xfs: make sure aglen never goes negative in xfs_refcount_adjust_extents
xfs: fix memcpy fortify errors in RUI log format copying
xfs: fix memcpy fortify errors in CUI log format copying
xfs: fix memcpy fortify errors in BUI log format copying
...
Linus Torvalds [Fri, 4 Nov 2022 21:37:25 +0000 (14:37 -0700)]
Merge tag 'efi-fixes-for-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- A pair of tweaks to the EFI random seed code so that externally
provided version of this config table are handled more robustly
- Another fix for the v6.0 EFI variable refactor that turned out to
break Apple machines which don't provide QueryVariableInfo()
- Add some guard rails to the EFI runtime service call wrapper so we
can recover from synchronous exceptions caused by firmware
* tag 'efi-fixes-for-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
arm64: efi: Recover from synchronous exceptions occurring in firmware
efi: efivars: Fix variable writes with unsupported query_variable_store()
efi: random: Use 'ACPI reclaim' memory for random seed
efi: random: reduce seed size to 32 bytes
efi/tpm: Pass correct address to memblock_reserve
Linus Torvalds [Fri, 4 Nov 2022 21:13:12 +0000 (14:13 -0700)]
Merge tag 'soc-fixes-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are not a lot of important fixes for the soc tree yet this time,
but it's time to upstream what I got so far:
- DT Fixes for Arm Juno and ST-Ericsson Ux500 to add missing critical
temperature points
- A number of fixes for the Arm SCMI firmware, addressing correctness
issues in the code, in particular error handling and resource
leaks.
- One error handling fix for the new i.MX93 power domain driver
- Several devicetree fixes for NXP i.MX6/8/9 and Layerscape chips,
fixing incorrect or missing DT properties for MDIO controller
nodes, CPLD, USB and regulators for various boards, as well as some
fixes for DT schema checks.
- MAINTAINERS file updates for HiSilicon LPC Bus and Broadcom git
URLs"
* tag 'soc-fixes-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (26 commits)
arm64: dts: juno: Add thermal critical trip points
firmware: arm_scmi: Fix deferred_tx_wq release on error paths
firmware: arm_scmi: Fix devres allocation device in virtio transport
firmware: arm_scmi: Make Rx chan_setup fail on memory errors
firmware: arm_scmi: Make tx_prepare time out eventually
firmware: arm_scmi: Suppress the driver's bind attributes
firmware: arm_scmi: Cleanup the core driver removal callback
MAINTAINERS: Update HiSilicon LPC BUS Driver maintainer
ARM: dts: ux500: Add trips to battery thermal zones
arm64: dts: ls208xa: specify clock frequencies for the MDIO controllers
arm64: dts: ls1088a: specify clock frequencies for the MDIO controllers
arm64: dts: lx2160a: specify clock frequencies for the MDIO controllers
soc: imx: imx93-pd: Fix the error handling path of imx93_pd_probe()
arm64: dts: imx93: correct gpio-ranges
arm64: dts: imx93: correct s4mu interrupt names
dt-bindings: power: gpcv2: add power-domains property
arm64: dts: imx8: correct clock order
ARM: dts: imx6dl-yapp4: Do not allow PM to switch PU regulator off on Q/QP
ARM: dts: imx6qdl-gw59{10,13}: fix user pushbutton GPIO offset
arm64: dts: imx8mn: Correct the usb power domain
...
Tony Luck [Thu, 3 Nov 2022 20:33:10 +0000 (13:33 -0700)]
x86/cpu: Add several Intel server CPU model numbers
These servers are all on the public versions of the roadmap. The model
numbers for Grand Ridge, Granite Rapids, and Sierra Forest were included
in the September 2022 edition of the Instruction Set Extensions document.
Linus Torvalds [Fri, 4 Nov 2022 18:31:41 +0000 (11:31 -0700)]
Merge tag 'drm-fixes-2022-11-04-1' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"This is the weekly fixes for rc4. Misc fixes across rockchip, imx,
amdgpu and i915.
The biggest change is for amdkfd where the trap handler needs an
updated fw from a header which makes it a bit larger. I hadn't noticed
this particular file before so I'm going to figure out what the magic
is for, but the fix should be fine for now.
* tag 'drm-fixes-2022-11-04-1' of git://anongit.freedesktop.org/drm/drm: (35 commits)
drm/amdkfd: update GFX11 CWSR trap handler
drm/amd/display: Investigate tool reported FCLK P-state deviations
drm/amd/display: Add DSC delay factor workaround
drm/amd/display: Round up DST_after_scaler to nearest int
drm/amd/display: Use forced DSC bpp in DML
drm/amd/display: Fix DCN32 DSC delay calculation
drm/amdgpu: Disable GPU reset on SRIOV before remove pci.
drm/amdgpu: disable GFXOFF during compute for GFX11
drm/amd: Fail the suspend if resources can't be evicted
drm/amdkfd: Fix NULL pointer dereference in svm_migrate_to_ram()
drm/amdgpu: correct MES debugfs versions
drm/amdgpu: set fb_modifiers_not_supported in vkms
drm/amd/display: cursor update command incomplete
drm/amd/display: Enable timing sync on DCN32
drm/amd/display: Set memclk levels to be at least 1 for dcn32
drm/amd/display: Update latencies on DCN321
drm/amd/display: Limit dcn32 to 1950Mhz display clock
drm/amd/display: Ignore Cable ID Feature
drm/amd/display: Update DSC capabilitie for DCN314
drm/imx: imx-tve: Fix return type of imx_tve_connector_mode_valid
...
Linus Torvalds [Fri, 4 Nov 2022 18:22:44 +0000 (11:22 -0700)]
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Fixes in clk drivers and some clk rate range fixes in the core as
well:
- Make sure the struct clk_rate_request is more sane
- Remove a WARN_ON that was triggering for clks with no parents that
can change frequency
- Fix bad i2c bus transactions on Renesas rs9
- Actually return an error in clk_mt8195_topck_probe() on an error
path
- Keep the GPU memories powered while the clk isn't enabled on
Qualcomm's sc7280 SoC
- Fix the parent clk for HSCIF modules on Renesas' R-Car V4H SoC"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: Update the force mem core bit for GPU clocks
clk: Initialize max_rate in struct clk_rate_request
clk: Initialize the clk_rate_request even if clk_core is NULL
clk: Remove WARN_ON NULL parent in clk_core_init_rate_req()
clk: renesas: r8a779g0: Fix HSCIF parent clocks
clk: renesas: r8a779g0: Add SASYNCPER clocks
clk: mediatek: clk-mt8195-topckgen: Fix error return code in clk_mt8195_topck_probe()
clk: sifive: select by default if SOC_SIFIVE
clk: rs9: Fix I2C accessors
Shang XiaoJing [Wed, 2 Nov 2022 07:29:54 +0000 (15:29 +0800)]
tracing: kprobe: Fix memory leak in test_gen_kprobe/kretprobe_cmd()
test_gen_kprobe_cmd() only free buf in fail path, hence buf will leak
when there is no failure. Move kfree(buf) from fail path to common path
to prevent the memleak. The same reason and solution in
test_gen_kretprobe_cmd().
tracing/fprobe: Fix to check whether fprobe is registered correctly
Since commit ab51e15d535e ("fprobe: Introduce FPROBE_FL_KPROBE_SHARED flag
for fprobe") introduced fprobe_kprobe_handler() for fprobe::ops::func,
unregister_fprobe() fails to unregister the registered if user specifies
FPROBE_FL_KPROBE_SHARED flag.
Moreover, __register_ftrace_function() is possible to change the
ftrace_ops::func, thus we have to check fprobe::ops::saved_func instead.
To check it correctly, it should confirm the fprobe::ops::saved_func is
either fprobe_handler() or fprobe_kprobe_handler().
Rafael Mendonca [Tue, 25 Oct 2022 03:12:08 +0000 (00:12 -0300)]
fprobe: Check rethook_alloc() return in rethook initialization
Check if fp->rethook succeeded to be allocated. Otherwise, if
rethook_alloc() fails, then we end up dereferencing a NULL pointer in
rethook_add_node().
Li Qiang [Thu, 3 Nov 2022 23:49:31 +0000 (08:49 +0900)]
kprobe: reverse kp->flags when arm_kprobe failed
In aggregate kprobe case, when arm_kprobe failed,
we need set the kp->flags with KPROBE_FLAG_DISABLED again.
If not, the 'kp' kprobe will been considered as enabled
but it actually not enabled.
Linus Torvalds [Thu, 3 Nov 2022 23:48:27 +0000 (16:48 -0700)]
Merge tag 'ata-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fixes from Damien Le Moal:
"Two driver fixes:
- Fix the PIO mode configuration of the pdc20230 (pata_legacy)
driver. This also removes a compilation warning with clang and W=1
(Sergey)
- Fix devm_platform_ioremap_resource() return value check in the
palmld driver (Yang)"
* tag 'ata-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: palmld: fix return value check in palmld_pata_probe()
ata: pata_legacy: fix pdc20230_set_piomode()
Linus Torvalds [Thu, 3 Nov 2022 20:41:29 +0000 (13:41 -0700)]
Merge tag 'fuse-fixes-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
"Fix two rarely triggered but long-standing issues"
* tag 'fuse-fixes-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: add file_modified() to fallocate
fuse: fix readdir cache race
Linus Torvalds [Thu, 3 Nov 2022 18:12:48 +0000 (11:12 -0700)]
Merge tag 'for-6.1-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A batch of error handling fixes for resource leaks, fixes for nowait
mode in combination with direct and buffered IO:
- direct IO + dsync + nowait could miss a sync of the file after
write, add handling for this combination
- buffered IO + nowait should not fail with ENOSPC, only blocking IO
could determine that
- error handling fixes:
- fix inode reserve space leak due to nowait buffered write
- check the correct variable after allocation (direct IO submit)
- fix inode list leak during backref walking
- fix ulist freeing in self tests"
* tag 'for-6.1-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix inode reserve space leak due to nowait buffered write
btrfs: fix nowait buffered write returning -ENOSPC
btrfs: remove pointless and double ulist frees in error paths of qgroup tests
btrfs: fix ulist leaks in error paths of qgroup self tests
btrfs: fix inode list leak during backref walking at find_parent_nodes()
btrfs: fix inode list leak during backref walking at resolve_indirect_refs()
btrfs: fix lost file sync on direct IO write with nowait and dsync iocb
btrfs: fix a memory allocation failure test in btrfs_submit_direct
arm64: cpufeature: Fix the visibility of compat hwcaps
Commit 237405ebef58 ("arm64: cpufeature: Force HWCAP to be based on the
sysreg visible to user-space") forced the hwcaps to use sanitised
user-space view of the id registers. However, the ID register structures
used to select few compat cpufeatures (vfp, crc32, ...) are masked and
hence such hwcaps do not appear in /proc/cpuinfo anymore for PER_LINUX32
personality.
Add the ID register structures explicitly and set the relevant entry as
visible. As these ID registers are now of type visible so make them
available in 64-bit userspace by making necessary changes in register
emulation logic and documentation.
While at it, update the comment for structure ftr_generic_32bits[] which
lists the ID register that use it.
Fixes: 237405ebef58 ("arm64: cpufeature: Force HWCAP to be based on the sysreg visible to user-space") Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: James Morse <james.morse@arm.com> Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com> Link: https://lore.kernel.org/r/20221103082232.19189-1-amit.kachhap@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Linus Torvalds [Thu, 3 Nov 2022 18:03:38 +0000 (11:03 -0700)]
Merge tag 'linux-kselftest-fixes-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"Fixes to the pidfd test"
* tag 'linux-kselftest-fixes-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/pidfd_test: Remove the erroneous ','
selftests: pidfd: Fix compling warnings
ksefltests: pidfd: Fix wait_states: Test terminated by timeout
Ard Biesheuvel [Fri, 28 Oct 2022 14:39:14 +0000 (16:39 +0200)]
arm64: efi: Recover from synchronous exceptions occurring in firmware
Unlike x86, which has machinery to deal with page faults that occur
during the execution of EFI runtime services, arm64 has nothing like
that, and a synchronous exception raised by firmware code brings down
the whole system.
With more EFI based systems appearing that were not built to run Linux
(such as the Windows-on-ARM laptops based on Qualcomm SOCs), as well as
the introduction of PRM (platform specific firmware routines that are
callable just like EFI runtime services), we are more likely to run into
issues of this sort, and it is much more likely that we can identify and
work around such issues if they don't bring down the system entirely.
Since we already use a EFI runtime services call wrapper in assembler,
we can quite easily add some code that captures the execution state at
the point where the call is made, allowing us to revert to this state
and proceed execution if the call triggered a synchronous exception.
Given that the kernel and the firmware don't share any data structures
that could end up in an indeterminate state, we can happily continue
running, as long as we mark the EFI runtime services as unavailable from
that point on.
Ben Gardon [Wed, 2 Nov 2022 20:53:59 +0000 (20:53 +0000)]
KVM: x86: Use SRCU to protect zap in __kvm_set_or_clear_apicv_inhibit()
kvm_zap_gfn_range() must be called in an SRCU read-critical section, but
there is no SRCU annotation in __kvm_set_or_clear_apicv_inhibit(). This
can lead to the following warning via
kvm_arch_vcpu_ioctl_set_guest_debug() if a Shadow MMU is in use (TDP
MMU disabled or nesting):
Always take the KVM SRCU read lock in __kvm_set_or_clear_apicv_inhibit()
to protect the GFN to memslot translation. The SRCU read lock is not
technically required when no Shadow MMUs are in use, since the TDP MMU
walks the paging structures from the roots and does not need to look up
GFN translations in the memslots, but make the SRCU locking
unconditional for simplicty.
In most cases, the SRCU locking is taken care of in the vCPU run loop,
but when called through other ioctls (such as KVM_SET_GUEST_DEBUG)
there is no srcu_read_lock.
Tested: ran tools/testing/selftests/kvm/x86_64/debug_regs on a DBG
build. This patch causes the suspicious RCU warning to disappear.
Note that the warning is hit in __kvm_zap_rmaps(), so
kvm_memslots_have_rmaps() must return true in order for this to
repro (i.e. the TDP MMU must be off or nesting in use.)
Reported-by: Greg Thelen <gthelen@google.com> Fixes: 36222b117e36 ("KVM: x86: don't disable APICv memslot when inhibited") Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20221102205359.1260980-1-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Dexuan Cui [Tue, 1 Nov 2022 02:17:05 +0000 (19:17 -0700)]
vsock: remove the unused 'wait' in vsock_connectible_recvmsg()
Remove the unused variable introduced by 19c1b90e1979.
Fixes: 19c1b90e1979 ("af_vsock: separate receive data loop") Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Juergen Gross [Thu, 20 Oct 2022 11:21:43 +0000 (13:21 +0200)]
x86/xen: silence smatch warning in pmu_msr_chk_emulated()
Commit 8714f7bcd3c2 ("xen/pv: add fault recovery control to pmu msr
accesses") introduced code resulting in a warning issued by the smatch
static checker, claiming to use an uninitialized variable.
This is a false positive, but work around the warning nevertheless.
Fixes: 8714f7bcd3c2 ("xen/pv: add fault recovery control to pmu msr accesses") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
Li Huafei [Thu, 3 Nov 2022 03:10:10 +0000 (11:10 +0800)]
ftrace: Fix use-after-free for dynamic ftrace_ops
KASAN reported a use-after-free with ftrace ops [1]. It was found from
vmcore that perf had registered two ops with the same content
successively, both dynamic. After unregistering the second ops, a
use-after-free occurred.
In ftrace_shutdown(), when the second ops is unregistered, the
FTRACE_UPDATE_CALLS command is not set because there is another enabled
ops with the same content. Also, both ops are dynamic and the ftrace
callback function is ftrace_ops_list_func, so the
FTRACE_UPDATE_TRACE_FUNC command will not be set. Eventually the value
of 'command' will be 0 and ftrace_shutdown() will skip the rcu
synchronization.
However, ftrace may be activated. When the ops is released, another CPU
may be accessing the ops. Add the missing synchronization to fix this
problem.
[1]
BUG: KASAN: use-after-free in __ftrace_ops_list_func kernel/trace/ftrace.c:7020 [inline]
BUG: KASAN: use-after-free in ftrace_ops_list_func+0x2b0/0x31c kernel/trace/ftrace.c:7049
Read of size 8 at addr ffff56551965bbc8 by task syz-executor.2/14468
ring-buffer: Check for NULL cpu_buffer in ring_buffer_wake_waiters()
On some machines the number of listed CPUs may be bigger than the actual
CPUs that exist. The tracing subsystem allocates a per_cpu directory with
access to the per CPU ring buffer via a cpuX file. But to save space, the
ring buffer will only allocate buffers for online CPUs, even though the
CPU array will be as big as the nr_cpu_ids.
With the addition of waking waiters on the ring buffer when closing the
file, the ring_buffer_wake_waiters() now needs to make sure that the
buffer is allocated (with the irq_work allocated with it) before trying to
wake waiters, as it will cause a NULL pointer dereference.
While debugging this, I added a NULL check for the buffer itself (which is
OK to do), and also NULL pointer checks against buffer->buffers (which is
not fine, and will WARN) as well as making sure the CPU number passed in
is within the nr_cpu_ids (which is also not fine if it isn't).
Zhengchao Shao [Wed, 2 Nov 2022 02:06:10 +0000 (10:06 +0800)]
ipv6: fix WARNING in ip6_route_net_exit_late()
During the initialization of ip6_route_net_init_late(), if file
ipv6_route or rt6_stats fails to be created, the initialization is
successful by default. Therefore, the ipv6_route or rt6_stats file
doesn't be found during the remove in ip6_route_net_exit_late(). It
will cause WRNING.
The following is the stack information:
name 'rt6_stats'
WARNING: CPU: 0 PID: 9 at fs/proc/generic.c:712 remove_proc_entry+0x389/0x460
Modules linked in:
Workqueue: netns cleanup_net
RIP: 0010:remove_proc_entry+0x389/0x460
PKRU: 55555554
Call Trace:
<TASK>
ops_exit_list+0xb0/0x170
cleanup_net+0x4ea/0xb00
process_one_work+0x9bf/0x1710
worker_thread+0x665/0x1080
kthread+0x2e4/0x3a0
ret_from_fork+0x1f/0x30
</TASK>
Fixes: cdb1876192db ("[NETNS][IPV6] route6 - create route6 proc files for the namespace") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20221102020610.351330-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix it by passing NULL to pneigh_queue_purge() in neigh_ifdown() if dev
is NULL, to make kernel not panic immediately.
Fixes: 66ba215cb513 ("neigh: fix possible DoS due to net iface start/stop loop") Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Link: https://lore.kernel.org/r/20221101121552.21890-1-chenzhongjin@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Chen Zhongjin [Tue, 1 Nov 2022 09:37:22 +0000 (17:37 +0800)]
net/smc: Fix possible leaked pernet namespace in smc_init()
In smc_init(), register_pernet_subsys(&smc_net_stat_ops) is called
without any error handling.
If it fails, registering of &smc_net_ops won't be reverted.
And if smc_nl_init() fails, &smc_net_stat_ops itself won't be reverted.
This leaves wild ops in subsystem linkedlist and when another module
tries to call register_pernet_operations() it triggers page fault:
BUG: unable to handle page fault for address: fffffbfff81b964c
RIP: 0010:register_pernet_operations+0x1b9/0x5f0
Call Trace:
<TASK>
register_pernet_subsys+0x29/0x40
ebtables_init+0x58/0x1000 [ebtables]
...
Fixes: 194730a9beb5 ("net/smc: Make SMC statistics network namespace aware") Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Link: https://lore.kernel.org/r/20221101093722.127223-1-chenzhongjin@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Liu Peibao [Tue, 1 Nov 2022 06:02:18 +0000 (14:02 +0800)]
stmmac: dwmac-loongson: fix invalid mdio_node
In current code "plat->mdio_node" is always NULL, the mdio
support is lost as there is no "mdio_bus_data". The original
driver could work as the "mdio" variable is never set to
false, which is described in commit <b0e03950dd71> ("stmmac:
dwmac-loongson: fix uninitialized variable ......"). And
after this commit merged, the "mdio" variable is always
false, causing the mdio supoort logic lost.
Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson") Signed-off-by: Liu Peibao <liupeibao@loongson.cn> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20221101060218.16453-1-liupeibao@loongson.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nick Child [Mon, 31 Oct 2022 15:06:42 +0000 (10:06 -0500)]
ibmvnic: Free rwi on reset success
Free the rwi structure in the event that the last rwi in the list
processed successfully. The logic in commit 4f408e1fa6e1 ("ibmvnic:
retry reset if there are no other resets") introduces an issue that
results in a 32 byte memory leak whenever the last rwi in the list
gets processed.
Gaosheng Cui [Mon, 31 Oct 2022 13:26:45 +0000 (21:26 +0800)]
net: mdio: fix undefined behavior in bit shift for __mdiobus_register
Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:
UBSAN: shift-out-of-bounds in drivers/net/phy/mdio_bus.c:586:27
left shift of 1 by 31 places cannot be represented in type 'int'
Call Trace:
<TASK>
dump_stack_lvl+0x7d/0xa5
dump_stack+0x15/0x1b
ubsan_epilogue+0xe/0x4e
__ubsan_handle_shift_out_of_bounds+0x1e7/0x20c
__mdiobus_register+0x49d/0x4e0
fixed_mdio_bus_init+0xd8/0x12d
do_one_initcall+0x76/0x430
kernel_init_freeable+0x3b3/0x422
kernel_init+0x24/0x1e0
ret_from_fork+0x1f/0x30
</TASK>
Fixes: 4fd5f812c23c ("phylib: allow incremental scanning of an mii bus") Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20221031132645.168421-1-cuigaosheng1@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 3 Nov 2022 02:42:04 +0000 (19:42 -0700)]
Merge tag 'for-net-2022-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth 2022-11-02
- Fix memory leak in hci_vhci driver
- Fix handling of skb on virtio_bt driver
- Fix accepting connection for invalid L2CAP PSM
- Fix attemting to access uninitialized memory
- Fix use-after-free in l2cap_reassemble_sdu
- Fix use-after-free in l2cap_conn_del
- Fix handling of destination address type for CIS
- Fix not restoring ISO buffer count on disconnect
* tag 'for-net-2022-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: L2CAP: Fix attempting to access uninitialized memory
Bluetooth: L2CAP: Fix l2cap_global_chan_by_psm
Bluetooth: L2CAP: Fix accepting connection request for invalid SPSM
Bluetooth: hci_conn: Fix not restoring ISO buffer count on disconnect
Bluetooth: L2CAP: Fix memory leak in vhci_write
Bluetooth: L2CAP: fix use-after-free in l2cap_conn_del()
Bluetooth: virtio_bt: Use skb_put to set length
Bluetooth: hci_conn: Fix CIS connection dst_type handling
Bluetooth: L2CAP: Fix use-after-free caused by l2cap_reassemble_sdu
====================
Bluetooth: L2CAP: Fix attempting to access uninitialized memory
On l2cap_parse_conf_req the variable efs is only initialized if
remote_efs has been set.
CVE: CVE-2022-42895 CC: stable@vger.kernel.org Reported-by: Tamás Koczka <poprdi@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Reviewed-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Bluetooth: L2CAP: Fix accepting connection request for invalid SPSM
The Bluetooth spec states that the valid range for SPSM is from
0x0001-0x00ff so it is invalid to accept values outside of this range:
BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 3, Part A
page 1059:
Table 4.15: L2CAP_LE_CREDIT_BASED_CONNECTION_REQ SPSM ranges
CVE: CVE-2022-42896 CC: stable@vger.kernel.org Reported-by: Tamás Koczka <poprdi@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Reviewed-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Jay Cornwall [Fri, 14 Oct 2022 02:41:13 +0000 (21:41 -0500)]
drm/amdkfd: update GFX11 CWSR trap handler
With corresponding FW change fixes issue where triggering CWSR on a
workgroup with waves in s_barrier wouldn't lead to a back-off and
therefore cause a hang.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Tested-by: Graham Sider <Graham.Sider@amd.com> Acked-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Graham Sider <Graham.Sider@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
[Why]
Fix for some of the tool reported modes for FCLK
P-state deviations and UCLK P-state deviations that
are coming from DSC terms and/or Scaling terms
causing MinActiveFCLKChangeLatencySupported
and MaxActiveDRAMClockChangeLatencySupported
incorrectly calculated in DML for these configurations.
Reviewed-by: Chaitanya Dhere <Chaitanya.Dhere@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
George Shen [Fri, 14 Oct 2022 21:46:03 +0000 (17:46 -0400)]
drm/amd/display: Add DSC delay factor workaround
[Why]
Certain 4K high refresh rate modes requiring DSC are exhibiting top
of screen underflow corruption. Increasing the DSC delay by a factor
of 6 percent stops the underflow for most use cases.
[How]
Multiply DSC delay requirement in DML by a factor.
Add debug option to make this DSC delay factor configurable.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
George Shen [Fri, 14 Oct 2022 21:40:08 +0000 (17:40 -0400)]
drm/amd/display: Round up DST_after_scaler to nearest int
[Why]
The DST_after_scaler value that DML spreadsheet outputs is
generally the driver value round up to the nearest int.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
George Shen [Fri, 14 Oct 2022 21:36:32 +0000 (17:36 -0400)]
drm/amd/display: Use forced DSC bpp in DML
[Why]
DSC config is calculated separately from DML calculations.
DML should use these separately calculated DSC params. The issue is
that the calculated bpp is not properly propagated into DML.
[How]
Correctly used forced_bpp value in DML.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
George Shen [Fri, 7 Oct 2022 16:43:26 +0000 (12:43 -0400)]
drm/amd/display: Fix DCN32 DSC delay calculation
[Why]
DCN32 DSC delay calculation had an unintentional integer division,
resulting in a mismatch against the DML spreadsheet.
[How]
Cast numerator to double before performing the division.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Gavin Wan [Wed, 26 Oct 2022 17:45:25 +0000 (13:45 -0400)]
drm/amdgpu: Disable GPU reset on SRIOV before remove pci.
The recent change brought a bug on SRIOV envrionment. It caused
unloading amdgpu failed on Guest VM. The reason is that the VF
FLR was requested while unloading amdgpu driver, but the VF FLR
of SRIOV sequence is wrong while removing PCI device.
For SRIOV, the guest driver should not trigger the whole XGMI hive
to do the reset. Host driver control how the device been reset.
Fixes: f5c7e7797060 ("drm/amdgpu: Adjust removal control flow for smu v13_0_2") Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Signed-off-by: Gavin Wan <Gavin.Wan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bluetooth: hci_conn: Fix not restoring ISO buffer count on disconnect
When disconnecting an ISO link the controller may not generate
HCI_EV_NUM_COMP_PKTS for unacked packets which needs to be restored in
hci_conn_del otherwise the host would assume they are still in use and
would not be able to use all the buffers available.
Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Frédéric Danis <frederic.danis@collabora.com>
HCI core will uses hci_rx_work() to process frame, which is queued to
the hdev->rx_q tail in hci_recv_frame() by HCI driver.
Yet the problem is that, HCI core may not free the skb after handling
ACL data packets. To be more specific, when start fragment does not
contain the L2CAP length, HCI core just copies skb into conn->rx_skb and
finishes frame process in l2cap_recv_acldata(), without freeing the skb,
which triggers the above memory leak.
This patch solves it by releasing the relative skb, after processing
the above case in l2cap_recv_acldata().
Zhengchao Shao [Mon, 17 Oct 2022 07:58:13 +0000 (15:58 +0800)]
Bluetooth: L2CAP: fix use-after-free in l2cap_conn_del()
When l2cap_recv_frame() is invoked to receive data, and the cid is
L2CAP_CID_A2MP, if the channel does not exist, it will create a channel.
However, after a channel is created, the hold operation of the channel
is not performed. In this case, the value of channel reference counting
is 1. As a result, after hci_error_reset() is triggered, l2cap_conn_del()
invokes the close hook function of A2MP to release the channel. Then
l2cap_chan_unlock(chan) will trigger UAF issue.
The process is as follows:
Receive data:
l2cap_data_channel()
a2mp_channel_create() --->channel ref is 2
l2cap_chan_put() --->channel ref is 1
Triger event:
hci_error_reset()
hci_dev_do_close()
...
l2cap_disconn_cfm()
l2cap_conn_del()
l2cap_chan_hold() --->channel ref is 2
l2cap_chan_del() --->channel ref is 1
a2mp_chan_close_cb() --->channel ref is 0, release channel
l2cap_chan_unlock() --->UAF of channel
The detailed Call Trace is as follows:
BUG: KASAN: use-after-free in __mutex_unlock_slowpath+0xa6/0x5e0
Read of size 8 at addr ffff8880160664b8 by task kworker/u11:1/7593
Workqueue: hci0 hci_error_reset
Call Trace:
<TASK>
dump_stack_lvl+0xcd/0x134
print_report.cold+0x2ba/0x719
kasan_report+0xb1/0x1e0
kasan_check_range+0x140/0x190
__mutex_unlock_slowpath+0xa6/0x5e0
l2cap_conn_del+0x404/0x7b0
l2cap_disconn_cfm+0x8c/0xc0
hci_conn_hash_flush+0x11f/0x260
hci_dev_close_sync+0x5f5/0x11f0
hci_dev_do_close+0x2d/0x70
hci_error_reset+0x9e/0x140
process_one_work+0x98a/0x1620
worker_thread+0x665/0x1080
kthread+0x2e4/0x3a0
ret_from_fork+0x1f/0x30
</TASK>
Last potentially related work creation:
kasan_save_stack+0x1e/0x40
__kasan_record_aux_stack+0xbe/0xd0
call_rcu+0x99/0x740
netlink_release+0xe6a/0x1cf0
__sock_release+0xcd/0x280
sock_close+0x18/0x20
__fput+0x27c/0xa90
task_work_run+0xdd/0x1a0
exit_to_user_mode_prepare+0x23c/0x250
syscall_exit_to_user_mode+0x19/0x50
do_syscall_64+0x42/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Second to last potentially related work creation:
kasan_save_stack+0x1e/0x40
__kasan_record_aux_stack+0xbe/0xd0
call_rcu+0x99/0x740
netlink_release+0xe6a/0x1cf0
__sock_release+0xcd/0x280
sock_close+0x18/0x20
__fput+0x27c/0xa90
task_work_run+0xdd/0x1a0
exit_to_user_mode_prepare+0x23c/0x250
syscall_exit_to_user_mode+0x19/0x50
do_syscall_64+0x42/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: d0be8347c623 ("Bluetooth: L2CAP: Fix use-after-free caused by l2cap_chan_put") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Soenke Huster [Wed, 12 Oct 2022 07:45:06 +0000 (09:45 +0200)]
Bluetooth: virtio_bt: Use skb_put to set length
By using skb_put we ensure that skb->tail is set
correctly. Currently, skb->tail is always zero, which
leads to errors, such as the following page fault in
rfcomm_recv_frame:
BUG: unable to handle page fault for address: ffffed1021de29ff
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
RIP: 0010:rfcomm_run+0x831/0x4040 (net/bluetooth/rfcomm/core.c:1751)
Fixes: afd2daa26c7a ("Bluetooth: Add support for virtio transport driver") Signed-off-by: Soenke Huster <soenke.huster@eknoes.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_connect_cis and iso_connect_cis call hci_bind_cis inconsistently
with dst_type being either ISO socket address type or the HCI type, but
these values cannot be mixed like this. Fix this by using only the HCI
type.
CIS connection dst_type was also not initialized in hci_bind_cis, even
though it is used in hci_conn_hash_lookup_cis to find existing
connections. Set the value in hci_bind_cis, so that existing CIS
connections are found e.g. when doing deferred socket connections, also
when dst_type is not 0 (ADDR_LE_DEV_PUBLIC).
Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
An SKB can be queued by the first flow and immediately dequeued and
freed by the second flow, therefore the callers of l2cap_reassemble_sdu
can't use the SKB after that function returns. However, some places
continue accessing struct l2cap_ctrl that resides in the SKB's CB for a
short time after l2cap_reassemble_sdu returns, leading to a
use-after-free condition (the stack trace is below, line numbers for
kernel 5.19.8).
Fix it by keeping a local copy of struct l2cap_ctrl.
BUG: KASAN: use-after-free in l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth
Read of size 1 at addr ffff88812025f2f0 by task kworker/u17:3/43169
Workqueue: hci0 hci_rx_work [bluetooth]
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:107 (discriminator 4))
print_report.cold (mm/kasan/report.c:314 mm/kasan/report.c:429)
? l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth
kasan_report (mm/kasan/report.c:162 mm/kasan/report.c:493)
? l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth
l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth
l2cap_rx (net/bluetooth/l2cap_core.c:7236 net/bluetooth/l2cap_core.c:7271) bluetooth
ret_from_fork (arch/x86/entry/entry_64.S:306)
</TASK>
Allocated by task 43169:
kasan_save_stack (mm/kasan/common.c:39)
__kasan_slab_alloc (mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:469)
kmem_cache_alloc_node (mm/slab.h:750 mm/slub.c:3243 mm/slub.c:3293)
__alloc_skb (net/core/skbuff.c:414)
l2cap_recv_frag (./include/net/bluetooth/bluetooth.h:425 net/bluetooth/l2cap_core.c:8329) bluetooth
l2cap_recv_acldata (net/bluetooth/l2cap_core.c:8442) bluetooth
hci_rx_work (net/bluetooth/hci_core.c:3642 net/bluetooth/hci_core.c:3832) bluetooth
process_one_work (kernel/workqueue.c:2289)
worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2437)
kthread (kernel/kthread.c:376)
ret_from_fork (arch/x86/entry/entry_64.S:306)
drm/amd: Fail the suspend if resources can't be evicted
If a system does not have swap and memory is under 100% usage,
amdgpu will fail to evict resources. Currently the suspend
carries on proceeding to reset the GPU:
At this point if the suspend actually succeeded I think that amdgpu
would have recovered because the GPU would have power cut off and
restored. However the kernel fails to continue the suspend from the
memory pressure and amdgpu fails to run the "resume" from the aborted
suspend.
```
ACPI: PM: Preparing to enter system sleep state S3
SLUB: Unable to allocate memory on node -1, gfp=0xdc0(GFP_KERNEL|__GFP_ZERO)
cache: Acpi-State, object size: 80, buffer size: 80, default order: 0, min order: 0
node 0: slabs: 22, objs: 1122, free: 0
ACPI Error: AE_NO_MEMORY, Could not update object reference count (20210730/utdelete-651)
To avoid this series of unfortunate events, fail amdgpu's suspend
when the memory eviction fails. This will let the system gracefully
recover and the user can try suspend again when the memory pressure
is relieved.
Reported-by: post@davidak.de Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2223 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Arnd Bergmann [Wed, 2 Nov 2022 20:57:38 +0000 (21:57 +0100)]
Merge tag 'juno-fix-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Armv8 Juno fix for v6.1
Just a single fix to add the missing critical points in the thermal
zones that has been mandatory in the binding but was enforced in the
code recently.
* tag 'juno-fix-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: Add thermal critical trip points
Yang Li [Wed, 26 Oct 2022 02:00:54 +0000 (10:00 +0800)]
drm/amdkfd: Fix NULL pointer dereference in svm_migrate_to_ram()
./drivers/gpu/drm/amd/amdkfd/kfd_migrate.c:985:58-62: ERROR: p is NULL but dereferenced.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2549 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Yifan Zhang [Mon, 24 Oct 2022 04:47:47 +0000 (12:47 +0800)]
drm/amdgpu: set fb_modifiers_not_supported in vkms
This patch to fix the gdm3 start failure with virual display:
/usr/libexec/gdm-x-session[1711]: (II) AMDGPU(0): Setting screen physical size to 270 x 203
/usr/libexec/gdm-x-session[1711]: (EE) AMDGPU(0): Failed to make import prime FD as pixmap: 22
/usr/libexec/gdm-x-session[1711]: (EE) AMDGPU(0): failed to set mode: Invalid argument
/usr/libexec/gdm-x-session[1711]: (WW) AMDGPU(0): Failed to set mode on CRTC 0
/usr/libexec/gdm-x-session[1711]: (EE) AMDGPU(0): Failed to enable any CRTC
gnome-shell[1840]: Running GNOME Shell (using mutter 42.2) as a X11 window and compositing manager
/usr/libexec/gdm-x-session[1711]: (EE) AMDGPU(0): failed to set mode: Invalid argument
vkms doesn't have modifiers support, set fb_modifiers_not_supported to bring the gdm back.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Acked-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Tim Huang <Tim.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Max Tseng [Thu, 20 Oct 2022 15:46:52 +0000 (11:46 -0400)]
drm/amd/display: cursor update command incomplete
Missing send cursor_rect width & Height into DMUB. PSR-SU would use
these information. But missing these assignment in last refactor commit
Reported-by: Timur Kristóf <timur.kristof@gmail.com> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2227 Fixes: b73353f7f3d4 ("drm/amd/display: Use the same cursor info across features") Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Max Tseng <max.tseng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
projects / mirror_ubuntu-kernels.git / log