This occurred when sending a v4 skb over vxlan6 over ipsec, in which case
skb->protocol == htons(ETH_P_IPV6) while skb->sk->sk_family == AF_INET in
xfrm_local_error(). Then it will go to xfrm6_local_error() where it tries
to get ipv6 info from a ipv4 sk.
This issue was actually fixed by Commit 628e341f319f ("xfrm: make local
error reporting more robust"), but brought back by Commit 844d48746e4b
("xfrm: choose protocol family by skb protocol").
So to fix it, we should call xfrm6_local_error() only when skb->protocol
is htons(ETH_P_IPV6) and skb->sk->sk_family is AF_INET6.
Fixes: 844d48746e4b ("xfrm: choose protocol family by skb protocol") Reported-by: Xiumei Mu <xmu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
# ip xfrm policy update src 192.168.1.1/24 dst 192.168.1.2/24 dir in \
priority 1 mark 0 mask 0x10 #[1]
# ip xfrm policy update src 192.168.1.1/24 dst 192.168.1.2/24 dir in \
priority 2 mark 0 mask 0x1 #[2]
# ip xfrm policy update src 192.168.1.1/24 dst 192.168.1.2/24 dir in \
priority 2 mark 0 mask 0x10 #[3]
The issue was introduced by Commit 7cb8a93968e3 ("xfrm: Allow inserting
policies with matching mark and different priorities"). After that, the
policies [1] and [2] would be able to be added with different priorities.
However, policy [3] will actually match both [1] and [2]. Policy [1]
was matched due to the 1st 'return true' in xfrm_policy_mark_match(),
and policy [2] was matched due to the 2nd 'return true' in there. It
caused WARN_ON() in xfrm_policy_insert_list().
This patch is to fix it by only (the same value and priority) as the
same policy in xfrm_policy_mark_match().
Thanks to Yuehaibing, we could make this fix better.
v1->v2:
- check policy->mark.v == pol->mark.v only without mask.
Fixes: 7cb8a93968e3 ("xfrm: Allow inserting policies with matching mark and different priorities") Reported-by: Xiumei Mu <xmu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Here is the steps to reproduce the problem:
ip netns add foo
ip netns add bar
ip -n foo link add xfrmi0 type xfrm dev lo if_id 42
ip -n foo link set xfrmi0 netns bar
ip netns del foo
ip netns del bar
The problem is that x-netns xfrm interface are not removed when the link
netns is removed. This causes later this oops when thoses interfaces are
removed.
Let's add a handler to remove all interfaces related to a netns when this
netns is removed.
As on the tx path of vxlan over esp, skb->inner_network_header would be
set on vxlan_xmit() and xfrm4_tunnel_encap_add(), and the later one can
overwrite the former one. It causes skb_udp_tunnel_segment() to use a
wrong skb->inner_network_header, then the issue occurs.
This patch is to fix it by calling xfrm_output_gso() instead when the
inner_protocol is set, in which gso_segment of inner_protocol will be
done first.
While at it, also improve some code around.
Fixes: 7862b4058b9f ("esp: Add gso handlers for esp4 and esp6") Reported-by: Xiumei Mu <xmu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
This xfrm_state_put call in esp4/6_gro_receive() will cause
double put for state, as in out_reset path secpath_reset()
will put all states set in skb sec_path.
So fix it by simply remove the xfrm_state_put call.
Fixes: 6ed69184ed9c ("xfrm: Reset secpath in xfrm failure") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
For beet mode, when it's ipv6 inner address with nexthdrs set,
the packet format might be:
----------------------------------------------------
| outer | | dest | | | ESP | ESP |
| IP hdr | ESP | opts.| TCP | Data | Trailer | ICV |
----------------------------------------------------
The nexthdr from ESP could be NEXTHDR_HOP(0), so it should
continue processing the packet when nexthdr returns 0 in
xfrm_input(). Otherwise, when ipv6 nexthdr is set, the
packet will be dropped.
I don't see any error cases that nexthdr may return 0. So
fix it by removing the check for nexthdr == 0.
The intermediate result of the old term (4UL * 1024 * 1024 * 1024) is
4 294 967 296 or 0x100000000 which is no problem on 64 bit systems.
The patch does not change the later overall result of 0x100000 for
MAX_DMA32_PFN (after it has been shifted by PAGE_SHIFT). The new
calculation yields the same result, but does not require 64 bit
arithmetic.
On 32 bit systems the old calculation suffers from an arithmetic
overflow in that intermediate term in braces: 4UL aka unsigned long int
is 4 byte wide and an arithmetic overflow happens (the 0x100000000 does
not fit in 4 bytes), the in braces result is truncated to zero, the
following right shift does not alter that, so MAX_DMA32_PFN evaluates to
0 on 32 bit systems.
That wrong value is a problem in a comparision against MAX_DMA32_PFN in
the init code for swiotlb in pci_swiotlb_detect_4gb() to decide if
swiotlb should be active. That comparison yields the opposite result,
when compiling on 32 bit systems.
This was not possible before
1b7e03ef7570 ("x86, NUMA: Enable emulation on 32bit too")
when that MAX_DMA32_PFN was first made visible to x86_32 (and which
landed in v3.0).
In practice this wasn't a problem, unless CONFIG_SWIOTLB is active on
x86-32.
However if one has set CONFIG_IOMMU_INTEL, since
c5a5dc4cbbf4 ("iommu/vt-d: Don't switch off swiotlb if bounce page is used")
there's a dependency on CONFIG_SWIOTLB, which was not necessarily
active before. That landed in v5.4, where we noticed it in the fli4l
Linux distribution. We have CONFIG_IOMMU_INTEL active on both 32 and 64
bit kernel configs there (I could not find out why, so let's just say
historical reasons).
The effect is at boot time 64 MiB (default size) were allocated for
bounce buffers now, which is a noticeable amount of memory on small
systems like pcengines ALIX 2D3 with 256 MiB memory, which are still
frequently used as home routers.
We noticed this effect when migrating from kernel v4.19 (LTS) to v5.4
(LTS) in fli4l and got that kernel messages for example:
Linux version 5.4.22 (buildroot@buildroot) (gcc version 7.3.0 (Buildroot 2018.02.8)) #1 SMP Mon Nov 26 23:40:00 CET 2018
…
Memory: 183484K/261756K available (4594K kernel code, 393K rwdata, 1660K rodata, 536K init, 456K bss , 78272K reserved, 0K cma-reserved, 0K highmem)
…
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x0bb78000-0x0fb78000] (64MB)
The initial analysis and the suggested fix was done by user 'sourcejedi'
at stackoverflow and explicitly marked as GPLv2 for inclusion in the
Linux kernel:
https://unix.stackexchange.com/a/520525/50007
The new calculation, which does not suffer from that overflow, is the
same as for arch/mips now as suggested by Robin Murphy.
The fix was tested by fli4l users on round about two dozen different
systems, including both 32 and 64 bit archs, bare metal and virtualized
machines.
[ bp: Massage commit message. ]
Fixes: 1b7e03ef7570 ("x86, NUMA: Enable emulation on 32bit too") Reported-by: Alan Jenkins <alan.christopher.jenkins@gmail.com> Suggested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Alexander Dahl <post@lespocky.de> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable@vger.kernel.org Link: https://unix.stackexchange.com/q/520065/50007 Link: https://web.nettworks.org/bugs/browse/FFL-2560 Link: https://lkml.kernel.org/r/20200526175749.20742-1-post@lespocky.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
On a non-forwarding 802.11s link between two fairly busy
neighboring nodes (iperf with -P 16 at ~850MBit/s TCP;
1733.3 MBit/s VHT-MCS 9 80MHz short GI VHT-NSS 4), so with
frequent PREQ retries, usually after around 30-40 seconds the
following crash would occur:
With some added debug output / delays we were able to push the crash from
the timer callback runner into the callback function and by that shedding
some light on which object holding the timer gets corrupted:
Removing the "if (IS_ERR(dir)) dir = NULL;" check only works
if we adjust the remaining code to not rely on it being NULL.
Check IS_ERR_OR_NULL() before attempting to dereference it.
I'm not actually entirely sure this fixes the syzbot crash as
the kernel config indicates that they do have DEBUG_FS in the
kernel, but this is what I found when looking there.
Cc: stable@vger.kernel.org Fixes: d82574a8e5a4 ("cfg80211: no need to check return value of debugfs_create functions") Reported-by: syzbot+fd5332e429401bf42d18@syzkaller.appspotmail.com Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20200525113816.fc4da3ec3d4b.Ica63a110679819eaa9fb3bc1b7437d96b1fd187d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
The Debian kernel v5.6 triggers this kernel panic:
Kernel panic - not syncing: Bad Address (null pointer deref?)
Bad Address (null pointer deref?): Code=26 (Data memory access rights trap) at addr 0000000000000000
CPU: 0 PID: 0 Comm: swapper Not tainted 5.6.0-2-parisc64 #1 Debian 5.6.14-1
IAOQ[0]: mem_init+0xb0/0x150
IAOQ[1]: mem_init+0xb4/0x150
RP(r2): start_kernel+0x6c8/0x1190
Backtrace:
[<0000000040101ab4>] start_kernel+0x6c8/0x1190
[<0000000040108574>] start_parisc+0x158/0x1b8
on a HP-PARISC rp3440 machine with this memory layout:
Memory Ranges:
0) Start 0x0000000000000000 End 0x000000003fffffff Size 1024 MB
1) Start 0x0000004040000000 End 0x00000040ffdfffff Size 3070 MB
Fix the crash by avoiding virt_to_page() and similar functions in
mem_init() until the memory zones have been fully set up.
kobject_init_and_add() takes reference even when it fails.
Thus, when kobject_init_and_add() returns an error,
kobject_put() must be called to properly clean up the kobject.
We provided the right semantics on open drain lines being
by definition output but incidentally the irq set up function
would only allow IRQs on lines that were "not output".
Fix the semantics to allow output open drain lines to be used
for IRQs.
Reported-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Tested-by: Hans Verkuil <hverkuil@xs4all.nl> Cc: Russell King <linux@armlinux.org.uk> Cc: stable@vger.kernel.org # v5.3+ Link: https://lore.kernel.org/r/20200527140758.162280-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
io_uring does do the right thing for this case, and we're still returning
-EAGAIN to userspace for the cases we don't support. Revert this change
to avoid doing endless spins of resubmits.
KMSAN reported uninitialized data being written to disk when dumping
core. As a result, several kilobytes of kmalloc memory may be written
to the core file and then read by a non-privileged user.
Reported-by: sam <sunhaoyl@outlook.com> Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200419100848.63472-1-glider@google.com Link: https://github.com/google/kmsan/issues/76 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Replace superfluous VM_BUG_ON() with comment about correct usage.
Technically reverts commit 1d148e218a0d ("mm: add VM_BUG_ON_PAGE() to
page_mapcount()"), but context lines have changed.
Function isolate_migratepages_block() runs some checks out of lru_lock
when choose pages for migration. After checking PageLRU() it checks
extra page references by comparing page_count() and page_mapcount().
Between these two checks page could be removed from lru, freed and taken
by slab.
As a result this race triggers VM_BUG_ON(PageSlab()) in page_mapcount().
Race window is tiny. For certain workload this happens around once a
year.
The code in isolate_migratepages_block() was added in commit 119d6d59dcc0 ("mm, compaction: avoid isolating pinned pages") before
adding VM_BUG_ON into page_mapcount().
This race has been predicted in 2015 by Vlastimil Babka (see link
below).
[akpm@linux-foundation.org: comment tweaks, per Hugh] Fixes: 1d148e218a0d ("mm: add VM_BUG_ON_PAGE() to page_mapcount()") Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: David Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/159032779896.957378.7852761411265662220.stgit@buzz Link: https://lore.kernel.org/lkml/557710E1.6060103@suse.cz/ Link: https://lore.kernel.org/linux-mm/158937872515.474360.5066096871639561424.stgit@buzz/T/ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
When collapse_file() calls try_to_release_page(), it has already isolated
the page: so if releasing buffers happens to fail (as it sometimes does),
remember to putback_lru_page(): otherwise that page is left unreclaimable
and unfreeable, and the file extent uncollapsible.
Fixes: 99cb0dbd47a1 ("mm,thp: add read-only THP support for (non-shmem) FS") Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@surriel.com> Cc: <stable@vger.kernel.org> [5.4+] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2005231837500.1766@eggly.anvils Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
When connected mode is set, and we have connected and datagram traffic in
parallel, ipoib might crash with double free of datagram skb.
The current mechanism assumes that the order in the completion queue is
the same as the order of sent packets for all QPs. Order is kept only for
specific QP, in case of mixed UD and CM traffic we have few QPs (one UD and
few CM's) in parallel.
The problem:
----------------------------------------------------------
Transmit queue:
-----------------
UD skb pointer kept in queue itself, CM skb kept in spearate queue and
uses transmit queue as a placeholder to count the number of total
transmitted packets.
1. CM1 'wc' processing
- skb freed in cm separate ring.
- tx_tail of transmit queue increased although UD2 is not freed.
Now driver assumes UD2 index is already freed and it could be used for
new transmitted skb.
0 1 2 3 4 5 6 7 8 9 10 11 12 13 .........127
------------------------------------------------------------
NL NL UD2 CM1 ud3 cm2 cm3 ud4 cm4 ud5 NL NL NL ...........
------------------------------------------------------------
^ ^ ^
(Bad)tail head
(Bad - Could be used for new SKB)
In this case (due to heavy load) UD2 skb pointer could be replaced by new
transmitted packet UD_NEW, as the driver assumes its free. At this point
we will have to process two 'wc' with same index but we have only one
pointer to free.
During second attempt to free the same skb we will have NULL pointer
exception.
2. UD2 'wc' processing
- skb freed according the index we got from 'wc', but it was already
overwritten by mistake. So actually the skb that was released is the
skb of the new transmitted packet and not the original one.
The fix:
-----------------------------------------------------------------------
The fix is to stop using the UD ring as a placeholder for CM packets, the
cyclic ring variables tx_head and tx_tail will manage the UD tx_ring, a
new cyclic variables global_tx_head and global_tx_tail are introduced for
managing and counting the overall outstanding sent packets, then the send
queue will be stopped and waken based on these variables only.
Note that no locking is needed since global_tx_head is updated in the xmit
flow and global_tx_tail is updated in the NAPI flow only. A previous
attempt tried to use one variable to count the outstanding sent packets,
but it did not work since xmit and NAPI flows can run at the same time and
the counter will be updated wrongly. Thus, we use the same simple cyclic
head and tail scheme that we have today for the UD tx_ring.
Fixes: 2c104ea68350 ("IB/ipoib: Get rid of the tx_outstanding variable in all modes") Link: https://lore.kernel.org/r/20200527134705.480068-1-leon@kernel.org Signed-off-by: Valentine Fatiev <valentinef@mellanox.com> Signed-off-by: Alaa Hleihel <alaa@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Fix use after free when user user space request uobject concurrently for
the same object, within the RCU grace period.
In that case, remove_handle_idr_uobject() is called twice and we will have
an extra put on the uobject which cause use after free. Fix it by leaving
the uobject write locked after it was removed from the idr.
Call to rdma_lookup_put_uobject with UVERBS_LOOKUP_DESTROY instead of
UVERBS_LOOKUP_WRITE will do the work.
It's possible for the VFS to completely forget about an inode, but for
it to still be sitting on the cap release queue. If the MDS sends the
client a cap message for such an inode, it just ignores it today, which
can lead to a stall of up to 5s until the cap release queue is flushed.
If we get a cap message for an inode that can't be located, then go
ahead and flush the cap release queue.
Cc: stable@vger.kernel.org
URL: https://tracker.ceph.com/issues/45532 Fixes: 1e9c2eb6811e ("ceph: delete stale dentry when last reference is dropped") Reported-and-Tested-by: Andrej Filipčič <andrej.filipcic@ijs.si> Suggested-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
OSD client should ignore cache/overlay flag if got redirect reply.
Otherwise, the client hangs when the cache tier is in forward mode.
[ idryomov: Redirects are effectively deprecated and no longer
used or tested. The original tiering modes based on redirects
are inherently flawed because redirects can race and reorder,
potentially resulting in data corruption. The new proxy and
readproxy tiering modes should be used instead of forward and
readforward. Still marking for stable as obviously correct,
though. ]
Cc: stable@vger.kernel.org
URL: https://tracker.ceph.com/issues/23296
URL: https://tracker.ceph.com/issues/36406 Signed-off-by: Jerry Lee <leisurelysw24@gmail.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Gigabyte TRX40 Aorus Master is equipped with two USB-audio devices,
a Realtek ALC1220-VB codec (USB ID 0414:a001) and an ESS SABRE9218 DAC
(USB ID 0414:a000). The latter serves solely for the headphone output
on the front panel while the former serves for the rest I/Os (mostly
for the I/Os in the rear panel but also including the front mic).
Both chips do work more or less with the unmodified USB-audio driver,
but there are a few glitches. The ALC1220-VB returns an error for an
inquiry to some jacks, as already seen on other TRX40-based mobos.
However this machine has a slightly incompatible configuration, hence
the existing mapping cannot be used as is.
Meanwhile the ESS chip seems working without any quirk. But since
both audio devices don't provide any specific names, both cards appear
as "USB-Audio", and it's quite confusing for users.
This patch is an attempt to overcome those issues:
- The specific mapping table for ALC1220-VB is provided, reducing the
non-working nodes and renaming the badly chosen controls.
The connector map isn't needed here unlike other TRX40 quirks.
- For both USB IDs (0414:a000 and 0414:a001), provide specific card
name strings, so that user-space can identify more easily; and more
importantly, UCM profile can be applied to each.
An invariant of cap_bprm_set_creds is that every field in the new cred
structure that cap_bprm_set_creds might set, needs to be set every
time to ensure the fields does not get a stale value.
The field cap_ambient is not set every time cap_bprm_set_creds is
called, which means that if there is a suid or sgid script with an
interpreter that has neither the suid nor the sgid bits set the
interpreter should be able to accept ambient credentials.
Unfortuantely because cap_ambient is not reset to it's original value
the interpreter can not accept ambient credentials.
Given that the ambient capability set is expected to be controlled by
the caller, I don't think this is particularly serious. But it is
definitely worth fixing so the code works correctly.
I have tested to verify my reading of the code is correct and the
interpreter of a sgid can receive ambient capabilities with this
change and cannot receive ambient capabilities without this change.
Cc: stable@vger.kernel.org Cc: Andy Lutomirski <luto@kernel.org> Fixes: 58319057b784 ("capabilities: ambient capabilities") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
The Asus USB DAC is a USB type-C audio dongle for connecting to
the headset and headphone. The volume minimum value -23040 which
is 0xa600 in hexadecimal with the resolution value 1 indicates
this should be endianness issue caused by the firmware bug. Add
a volume quirk to fix the volume control problem.
Also fixes this warning:
Warning! Unlikely big volume range (=23040), cval->res is probably wrong.
[5] FU [Headset Capture Volume] ch = 1, val = -23040/0/1
Warning! Unlikely big volume range (=23040), cval->res is probably wrong.
[7] FU [Headset Playback Volume] ch = 1, val = -23040/0/1
We fixed the regression of the speaker volume for some Thinkpad models
(e.g. T570) by the commit 54947cd64c1b ("ALSA: hda/realtek - Fix
speaker output regression on Thinkpad T570"). Essentially it fixes
the DAC / pin pairing by a static table. It was confirmed and merged
to stable kernel later.
Now, interestingly, we got another regression report for the very same
model (T570) about the similar problem, and the commit above was the
culprit. That is, by some reason, there are devices that prefer the
DAC1, and another device DAC2!
Unfortunately those have the same ID and we have no idea what can
differentiate, in this patch, a new fixup model "tpt470-dock-fix" is
provided, so that users with such a machine can apply it manually.
When model=tpt470-dock-fix option is passed to snd-hda-intel module,
it avoids the fixed DAC pairing and the DAC1 is assigned to the
speaker like the earlier versions.
The data structure member “rpmb->md” was passed to a call of the function
“mmc_blk_put” after a call of the function “put_device”. Reorder these
function calls to keep the data accesses consistent.
These error messages are output when booting on a BCM HR2 system:
GIC: PPI11 is secure or misconfigured
GIC: PPI13 is secure or misconfigured
Per ARM documentation these interrupts are triggered on a rising edge.
See ARM Cortex A-9 MPCore Technical Reference Manual, Revision r4p1,
Section 3.3.8 Interrupt Configuration Registers.
The same issue was resolved for NSP systems in commit 5f1aa51c7a1e
("ARM: dts: NSP: Fix PPI interrupt types").
Avoid LDB and IPU DI clocks both using the same parent. LDB requires
pasthrough clock to avoid breaking timing while IPU DI does not.
Force IPU DI clocks to use IMX6QDL_CLK_PLL2_PFD0_352M as parent
and LDB to use IMX6QDL_CLK_PLL5_VIDEO_DIV.
This fixes an issue where attempting atomic modeset while using
HDMI and display port at the same time causes LDB clock programming
to destroy the programming of HDMI that was done during the same
modeset.
Cc: stable@vger.kernel.org Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
[Use IMX6QDL_CLK_PLL2_PFD0_352M instead of IMX6QDL_CLK_PLL2_PFD2_396M
originally chosen by Robert Beckett to avoid affecting eMMC clock
by DRM atomic updates] Signed-off-by: Ian Ray <ian.ray@ge.com>
[Squash Robert's and Ian's commits for bisectability, update patch
description and add stable tag] Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
When kobject_init_and_add() returns an error in the function
qib_create_port_files(), the function kobject_put() is not called for the
corresponding kobject, which potentially leads to memory leak.
This patch fixes the issue by calling kobject_put() even if
kobject_init_and_add() fails. In addition, the ppd->diagc_kobj is released
along with other kobjects when the sysfs is unregistered.
Fixes: f931551bafe1 ("IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters") Link: https://lore.kernel.org/r/20200512031328.189865.48627.stgit@awfm-01.aw.intel.com Cc: <stable@vger.kernel.org> Suggested-by: Lin Yi <teroincn@gmail.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
The opaque pointer passed to the IRQ handler is a pointer to the
drm_device, not a pointer to our ingenic_drm structure.
It still worked, because our ingenic_drm structure contains the
drm_device as its first field, so the pointer received had the same
value, but this was not semantically correct.
Cc: stable@vger.kernel.org # v5.3 Fixes: 90b86fcc47b4 ("DRM: Add KMS driver for the Ingenic JZ47xx SoCs") Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200516215057.392609-5-paul@crapouillou.net Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Fix the assigned-clock-parents to higher frequency clock to avoid h264
encode timeout:
[ 134.763465] mtk_vpu 10020000.vpu: vpu ipi 4 ack time out !
[ 134.769008] [MTK_VCODEC][ERROR][18]: vpu_enc_send_msg() vpu_ipi_send msg_id c002 len 32 fail -5
[ 134.777707] [MTK_VCODEC][ERROR][18]: vpu_enc_encode() AP_IPIMSG_ENC_ENCODE 0 fail
venc_sel is the clock used by h264 encoder, and venclt_sel is the clock
used by vp8 encoder. Assign venc_sel to vcodecpll_ck and venclt_sel to
vcodecpll_370p5.
The commit 7ecced0934e5 ("gpio: exar: add a check for the return value
of ida_simple_get fails") added a goto jump to the common error
handler for ida_simple_get() error, but this is wrong in two ways:
it doesn't set the proper return code and, more badly, it invokes
ida_simple_remove() with a negative index that shall lead to a kernel
panic via BUG_ON().
This patch addresses those two issues.
Fixes: 7ecced0934e5 ("gpio: exar: add a check for the return value of ida_simple_get fails") Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Tomas Paukrt reports that his SAM9X60 based system (ARM926, ARMv5TJ)
fails to fix up alignment faults, eventually resulting in a kernel
oops.
The problem occurs when using CONFIG_CPU_USE_DOMAINS with commit e6978e4bf181 ("ARM: save and reset the address limit when entering an
exception"). This is because the address limit is set back to
TASK_SIZE on exception entry, and, although it is restored on exception
exit, the domain register is not.
At this point, addr_limit is correctly restored to KERNEL_DS for
__probe_kernel_read() to continue execution, but dacr.kernel is not,
it has been reset by the set_fs(old_fs) to DOMAIN_CLIENT.
This would not have happened prior to the mentioned commit, because
addr_limit would remain KERNEL_DS, so get_fs() would have returned
KERNEL_DS, and so would correctly nest.
This commit fixes the problem by also saving the DACR on exception
entry if either CONFIG_CPU_SW_DOMAIN_PAN or CONFIG_CPU_USE_DOMAINS are
enabled, and resetting the DACR appropriately on exception entry to
match addr_limit and PAN settings.
Fixes: e6978e4bf181 ("ARM: save and reset the address limit when entering an exception") Reported-by: Tomas Paukrt <tomas.paukrt@advantech.cz> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Consolidate the user access assembly code to asm/uaccess-asm.h. This
moves the csdb, check_uaccess, uaccess_mask_range_ptr, uaccess_enable,
uaccess_disable, uaccess_save, uaccess_restore macros, and creates two
new ones for exception entry and exit - uaccess_entry and uaccess_exit.
This makes the uaccess_save and uaccess_restore macros private to
asm/uaccess-asm.h.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Fix a use-after-free noticed by running with KASAN enabled. If
rmi_irq_fn() is run twice in a row, then rmi_f11_attention() (among
others) will end up reading from drvdata->attn_data.data, which was
freed and left dangling in rmi_irq_fn().
Commit 55edde9fff1a ("Input: synaptics-rmi4 - prevent UAF reported by
KASAN") correctly identified and analyzed this bug. However the attempted
fix only NULLed out a local variable, missing the fact that
drvdata->attn_data is a struct, not a pointer.
NULL out the correct pointer in the driver data to prevent the attention
functions from copying from it.
On the Lenovo ThinkPad Twist S230u (3347-4HU) with BIOS version
"GDETC1WW (1.81 ) 06/27/2019", the keyboard, Synaptics TouchPad, and
TrackPoint either do not function or stop functioning a few minutes
after boot. This problem has been noted before, perhaps only occurring
with BIOS 1.57 and later.[1][2][3][4][5]
Odds of a BIOS fix appear to be low: 1.57 was released over 6 years ago
and although the [BIOS changelog] notes "Fixed an issue of UEFI
touchpad/trackpoint/keyboard/touchscreen" in 1.58, it appears to be
insufficient.
Setting i8042.reset=1 or adding 33474HU to the reset list avoids the
issue on my system from either warm or cold boot.
Sending [ 0x05, 0x20, 0x00, 0x0f, 0x06 ] packet for Xbox One S controllers
fixes an issue where controller is stuck in Bluetooth mode and not sending
any inputs.
input_flush_device() should only be called once the struct file is being
released and no open descriptors remain, but evdev_flush() was calling
it whenever a file descriptor was closed.
This caused uploaded force-feedback effects to be erased when a process
did a dup()/close() on the event FD, called system(), etc.
Call input_flush_device() from evdev_release() instead.
Based on available information this uses the singletouch irtouch
protocol. This is tested and confirmed to be fully functional on
the BonXeon TP hardware I have.
This patch fixes the following warning:
=============================
WARNING: suspicious RCU usage
5.7.0-rc5-next-20200514-syzkaller #0 Not tainted
-----------------------------
drivers/net/hamradio/bpqether.c:149 RCU-list traversed in non-reader section!!
Since rtnl lock is held, pass this cond in list_for_each_entry_rcu().
Reported-by: syzbot+bb82cafc737c002d11ca@syzkaller.appspotmail.com Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
GCC 10 is very strict about symbol clash, and lwt_len_hist_user contains
a symbol which clashes with libbpf:
/usr/bin/ld: samples/bpf/lwt_len_hist_user.o:(.bss+0x0): multiple definition of `bpf_log_buf'; samples/bpf/bpf_load.o:(.bss+0x8c0): first defined here
collect2: error: ld returned 1 exit status
bpf_log_buf here seems to be a leftover, so removing it.
If raw_copy_from_user(to, from, N) returns K, callers expect
the first N - K bytes starting at to to have been replaced with
the contents of corresponding area starting at from and the last
K bytes of destination *left* *unmodified*.
What arch/sky/lib/usercopy.c is doing is broken - it can lead to e.g.
data corruption on write(2).
raw_copy_to_user() is inaccurate about return value, which is a bug,
but consequences are less drastic than for raw_copy_from_user().
And just what are those access_ok() doing in there? I mean, look into
linux/uaccess.h; that's where we do that check (as well as zero tail
on failure in the callers that need zeroing).
AFAICS, all of that shouldn't be hard to fix; something like a patch
below might make a useful starting point.
I would suggest moving these macros into usercopy.c (they are never
used anywhere else) and possibly expanding them there; if you leave
them alive, please at least rename __copy_user_zeroing(). Again,
it must not zero anything on failed read.
Said that, I'm not sure we won't be better off simply turning
usercopy.c into usercopy.S - all that is left there is a couple of
functions, each consisting only of inline asm.
Guo Ren reply:
Yes, raw_copy_from_user is wrong, it's no need zeroing code.
unsigned long _copy_from_user(void *to, const void __user *from,
unsigned long n)
{
unsigned long res = n;
might_fault();
if (likely(access_ok(from, n))) {
kasan_check_write(to, n);
res = raw_copy_from_user(to, from, n);
}
if (unlikely(res))
memset(to + (n - res), 0, res);
return res;
}
EXPORT_SYMBOL(_copy_from_user);
Hey, I've no idea about the instruction scheduling on csky -
if that doesn't slow the things down, all the better. It's just
that copy_to_user() and friends are on fairly hot codepaths,
and in quite a few situations they will dominate the speed of
e.g. read(2). So I tried to keep the fast path unchanged.
Up to the architecture maintainers, obviously. Which would be
you...
As for the fixups size increase (__ex_table size is unchanged)...
You have each of those macros expanded exactly once.
So the size is not a serious argument, IMO - useless complexity
would be, if it is, in fact, useless; the size... not really,
especially since those extra subi will at least offset it.
Again, up to you - asm optimizations of (essentially)
memcpy()-style loops are tricky and can depend upon the
fairly subtle details of architecture. So even on something
I know reasonably well I would resort to direct experiments
if I can't pass the buck to architecture maintainers.
It *is* worth optimizing - this is where read() from a file
that is already in page cache spends most of the time, etc.
Guo Ren reply:
Thx, after fixup some typo “sub %0, 4”, apply the patch.
TODO:
- user copy/from codes are still need optimizing.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
The format of temperature limitation registers are 8-bit 2's complement
and the range is -128~127.
Converts the reading value to signed char to fix the incorrect range
of temperature limitation registers.
Interrupt has been disabled in __schedule() with local_irq_disable()
and enabled in finish_task_switch->finish_lock_switch() with
local_irq_enabled(), So needn't to disable irq here.
Signed-off-by: Liu Yibin <jiulong@linux.alibaba.com> Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Right now, trying to use RTC purely with the ti-sysc / clkctrl framework
fails to enable the RTC module properly. Based on experimentation, this
appears to be because RTC is sourced from the clkdiv32k optional clock.
TRM is not very clear on this topic, but fix the RTC to use the proper
source clock nevertheless.
Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> Link: https://lkml.kernel.org/r/20200424152301.4018-1-t-kristo@ti.com Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Drop static declaration to fix following build error if FRAME_POINTER disabled,
riscv64-linux-ld: arch/riscv/kernel/perf_callchain.o: in function `.L0':
perf_callchain.c:(.text+0x2b8): undefined reference to `walk_stackframe'
Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
I ran into a randconfig build failure with CONFIG_FIXED_PHY=m
and CONFIG_GIANFAR=y:
x86_64-linux-ld: drivers/net/ethernet/freescale/gianfar.o:(.rodata+0x418): undefined reference to `fixed_phy_change_carrier'
It seems the same thing can happen with dpaa and ucc_geth, so change
all three to do an explicit 'select FIXED_PHY'.
The fixed-phy driver actually has an alternative stub function that
theoretically allows building network drivers when fixed-phy is
disabled, but I don't see how that would help here, as the drivers
presumably would not work then.
drivers/usb/gadget/legacy/inode.c:1364:8: style: Redundant initialization for 'value'. The initialized value is overwritten$
value = -EOPNOTSUPP;
^
drivers/usb/gadget/legacy/inode.c:1331:15: note: value is initialized
int value = -EOPNOTSUPP;
^
drivers/usb/gadget/legacy/inode.c:1364:8: note: value is overwritten
value = -EOPNOTSUPP;
^
drivers/usb/gadget/legacy/inode.c:1817:8: style: Redundant initialization for 'value'. The initialized value is overwritten$
value = -EINVAL;
^
drivers/usb/gadget/legacy/inode.c:1787:18: note: value is initialized
ssize_t value = len, length = len;
^
drivers/usb/gadget/legacy/inode.c:1817:8: note: value is overwritten
value = -EINVAL;
^ Acked-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
A call to 'regulator_get()' is hidden in 'twl6030_usb_ldo_init()'. A
corresponding put must be performed in the error handling path, as
already done in the remove function.
While at it, also move a 'free_irq()' call in the error handling path in
order to be consistent.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
There is a potential race in fscache operation enqueuing for reading and
copying multiple pages from cachefiles to netfs. The problem can be seen
easily on a heavy loaded system (for example many processes reading files
continually on an NFS share covered by fscache triggered this problem within
a few minutes).
Releasing the AMDGPU BO ref directly leads to problems when BOs were
exported as DMA bufs. Releasing the GEM reference makes sure that the
AMDGPU/TTM BO is not freed too early.
Also take a GEM reference when importing BOs from DMABufs to keep
references to imported BOs balances properly.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Tested-by: Alex Sierra <alex.sierra@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Sierra <alex.sierra@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
As this is already properly handled in amdgpu_gfx_off_ctrl(). In fact,
this unnecessary cancel_delayed_work_sync may leave a small time window
for race condition and is dangerous.
Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
This patch rearranges gfs2_add_revoke so that the extra glock
reference is added earlier on in the function to avoid races in which
the glock is freed before the new reference is taken.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Before this patch, function gfs2_quota_lock checked if it was called
from a privileged user, and if so, it bypassed the quota check:
superuser can operate outside the quotas.
That's the wrong place for the check because the lock/unlock functions
are separate from the lock_check function, and you can do lock and
unlock without actually checking the quotas.
This patch moves the check to gfs2_quota_lock_check.
Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
This is another TRX40 based motherboard with ALC1220-VB USB-audio
that requires a static mapping table.
This motherboard also has a PCI device which advertises no codecs. The
PCI ID is 1022:1487 and PCI SSID is 1022:d102. As this is using the AMD
vendor ID, don't blacklist for now in case other boards have a working
audio device with the same ssid.
The driver currently leaves GPIO IRQs unmasked even when the GPIO IRQ
client has released the GPIO IRQ. This allows the HW to raise IRQs, and
SW to process them, after shutdown. Fix this by masking the IRQ when it's
shut down. This is usually taken care of by the irqchip core, but since
this driver has a custom irq_shutdown implementation, it must do this
explicitly itself.
arch/arm/boot/dts/rk3229-evb.dt.yaml: spi-0:
'#address-cells' is a required property
arch/arm/boot/dts/rk3229-evb.dt.yaml: spi-1:
'#address-cells' is a required property
arch/arm/boot/dts/rk3229-xms6.dt.yaml: spi-0:
'#address-cells' is a required property
arch/arm/boot/dts/rk3229-xms6.dt.yaml: spi-1:
'#address-cells' is a required property
The $nodename pattern for spi nodes is
"^spi(@.*|-[0-9a-f])*$". To prevent warnings rename
'spi-0' and 'spi-1' pinctrl sub nodenames to
'spi0' and 'spi1' in 'rk322x.dtsi'.
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/spi/spi-controller.yaml
Dts files with Rockchip 'gpu' nodes were manually verified.
In order to automate this process arm,mali-utgard.txt
has been converted to yaml. In the new setup dtbs_check with
arm,mali-utgard.yaml expects clock-names values
in the same order, so fix that.
Dts files with Rockchip rk3399 'gpu' nodes were manually verified.
In order to automate this process arm,mali-midgard.txt
has been converted to yaml. In the new setup dtbs_check with
arm,mali-midgard.yaml expects interrupts and interrupt-names values
in the same order. Fix this for rk3399.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/gpu/
arm,mali-midgard.yaml
A test with the command below gives for example this error:
arch/arm/boot/dts/rk3229-xms6.dt.yaml: phy@0:
'#phy-cells' is a required property
The phy nodename is normally used by a phy-handle.
This node is however compatible with
"ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22"
which is just been added to 'ethernet-phy.yaml'.
So change nodename to 'ethernet-phy' for which '#phy-cells'
is not a required property
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
phy/phy-provider.yaml
A test with the command below gives for example this error:
arch/arm/boot/dts/rk3228-evb.dt.yaml: phy@0:
'#phy-cells' is a required property
The phy nodename is normally used by a phy-handle.
This node is however compatible with
"ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22"
which is just been added to 'ethernet-phy.yaml'.
So change nodename to 'ethernet-phy' for which '#phy-cells'
is not a required property
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
phy/phy-provider.yaml
In case of reload fail, the mlxsw_sp->ports contains a pointer to a
freed memory (either by reload_down() or reload_up() error path).
Fix this by initializing the pointer to NULL and checking it before
dereferencing in split/unsplit/type_set callpaths.
Fixes: 24cc68ad6c46 ("mlxsw: core: Add support for reload") Reported-by: Danielle Ratson <danieller@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
In function mlx4_opreq_action(), pointer "mailbox" is not released,
when mlx4_cmd_box() return and error, causing a memory leak bug.
Fix this issue by going to "out" label, mlx4_free_cmd_mailbox() can
free this pointer.
Fixes: fe6f700d6cbb ("net/mlx4_core: Respond to operation request by firmware") Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
In cas_init_one(), "pdev" is requested by "pci_request_regions", but it
was not released after a call of the function “pci_write_config_byte”
failed. Thus replace the jump target “err_write_cacheline” by
"err_out_free_res".
Fixes: 1f26dac32057 ("[NET]: Add Sun Cassini driver.") Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
We cannot free record on any transient error because it leads to
losing previos data. Check socket error to know whether record must
be freed or not.
Fixes: d10523d0b3d7 ("net/tls: free the record on encryption error") Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
bpf_exec_tx_verdict() can return negative value for copied
variable. In that case this value will be pushed back to caller
and the real error code will be lost. Fix it using signed type and
checking for positive value.
Fixes: d10523d0b3d7 ("net/tls: free the record on encryption error") Fixes: d3b18ad31f93 ("tls: add bpf support to sk_msg handling") Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
On sq closure when we free its descriptors, we should also update netdev
txq on completions which would not arrive. Otherwise if we reopen sqs
and attach them back, for example on fw fatal recovery flow, we may get
tx timeout.
In the cited commit inner_tirs argument was added to create and destroy
inner tirs, and no indication was added to mlx5e_modify_tirs_hash()
function. In order to have a consistent handling, use
inner_indir_tir[0].tirn in tirs destroy/modify function as an indication
to whether inner tirs are created.
Inner tirs are not created for representors and before this commit,
a call to mlx5e_modify_tirs_hash() was sending HW commands to
modify non-existent inner tirs.
Fixes: 46dc933cee82 ("net/mlx5e: Provide explicit directive if to create inner indirect tirs") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
The TLS TIS object contains the dek/key ID.
By destroying the key first, the TIS would contain an invalid
non-existing key ID.
Reverse the destroy order, this also acheives the desired assymetry
between the destroy and the create flows.
Fixes: e9c1a793210f ("tipc: add dst_cache support for udp media") Cc: Xin Long <lucien.xin@gmail.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Commit bdf6fa52f01b ("sctp: handle association restarts when the
socket is closed.") starts shutdown when an association is restarted,
if in SHUTDOWN-PENDING state and the socket is closed. However, the
rationale stated in that commit applies also when in SHUTDOWN-SENT
state - we don't want to move an association to ESTABLISHED state when
the socket has been closed, because that results in an association
that is unreachable from user space.
The problem scenario:
1. Client crashes and/or restarts.
2. Server (using one-to-one socket) calls close(). SHUTDOWN is lost.
3. Client reconnects using the same addresses and ports.
4. Server's association is restarted. The association and the socket
move to ESTABLISHED state, even though the server process has
closed its descriptor.
Also, after step 4 when the server process exits, some resources are
leaked in an attempt to release the underlying inet sock structure in
ESTABLISHED state:
Fix by acting the same way as in SHUTDOWN-PENDING state. That is, if
an association is restarted in SHUTDOWN-SENT state and the socket is
closed, then start shutdown and don't move the association or the
socket to ESTABLISHED state.
Fixes: bdf6fa52f01b ("sctp: handle association restarts when the socket is closed.") Signed-off-by: Jere Leppänen <jere.leppanen@nokia.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
It appears that the side effect that starts the shutdown timer was processed
multiple times, which can happen as multiple paths can trigger it. This of
course leads to the BUG halt in add_timer getting called.
Fix seems pretty straightforward, just check before the timer is added if its
already been started. If it has mod the timer instead to min(current
expiration, new expiration)
Its been tested but not confirmed to fix the problem, as the issue has only
occured in production environments where test kernels are enjoined from being
installed. It appears to be a sane fix to me though. Also, recentely,
Jere found a reproducer posted on list to confirm that this resolves the
issues
Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Vlad Yasevich <vyasevich@gmail.com> CC: "David S. Miller" <davem@davemloft.net> CC: jere.leppanen@nokia.com CC: marcelo.leitner@gmail.com CC: netdev@vger.kernel.org Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>