]> git.proxmox.com Git - mirror_ubuntu-kernels.git/log
mirror_ubuntu-kernels.git
3 years agoiwlwifi: pcie: add support for So-F devices
Luca Coelho [Fri, 26 Mar 2021 10:57:21 +0000 (12:57 +0200)]
iwlwifi: pcie: add support for So-F devices

We have a new type of device that has a different MAC ID, but is
otherwise identical to So devices.  Add rules to match this new ID
accordingly.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210326125611.4feea3560def.I2b6ef794c2073a18779dd40fb53f8c942d1ab42d@changeid
3 years agoiwlwifi: fw: fix notification wait locking
Johannes Berg [Fri, 26 Mar 2021 10:57:20 +0000 (12:57 +0200)]
iwlwifi: fw: fix notification wait locking

Since we now call iwl_notification_wait_notify() from the
NAPI poll in soft-IRQ, we get a (valid) lockdep complaint
that we could get a deadlock by taking the spinlock from
sleeping context and then getting the soft-IRQ that also
tries to take it (in NAPI polling).

Fix this by disabling soft-IRQs for this lock.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: 25edc8f259c7 ("iwlwifi: pcie: properly implement NAPI")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210326125611.c3b2e3d6b58b.Ic56f351d04674df70567bab0269cba91bdbc853c@changeid
3 years agoiwlwifi: add support for Qu with AX201 device
Matt Chen [Fri, 26 Mar 2021 10:57:19 +0000 (12:57 +0200)]
iwlwifi: add support for Qu with AX201 device

Add this specific Samsung AX201 sku to driver so it can be
detected and initialized successfully.

Signed-off-by: Matt Chen <matt.chen@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210326125611.30b622037714.Id9fd709cf1c8261c097bbfd7453f6476077dcafc@changeid
3 years agoiwlwifi: pcie: properly set LTR workarounds on 22000 devices
Johannes Berg [Fri, 26 Mar 2021 10:57:18 +0000 (12:57 +0200)]
iwlwifi: pcie: properly set LTR workarounds on 22000 devices

As the context info gen3 code is only called for >=AX210 devices
(from iwl_trans_pcie_gen2_start_fw()) the code there to set LTR
on 22000 devices cannot actually do anything (22000 < AX210).

Fix this by moving the LTR code to iwl_trans_pcie_gen2_start_fw()
where it can handle both devices. This then requires that we kick
the firmware only after that rather than doing it from the context
info code.

Note that this again had a dead branch in gen3 code, which I've
removed here.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: ed0022da8bd9 ("iwlwifi: pcie: set LTR on more devices")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210326125611.675486178ed1.Ib61463aba6920645059e366dcdca4c4c77f0ff58@changeid
3 years agoiwlwifi: fix 11ax disabled bit in the regulatory capability flags
Luca Coelho [Fri, 26 Mar 2021 10:57:17 +0000 (12:57 +0200)]
iwlwifi: fix 11ax disabled bit in the regulatory capability flags

When version 2 of the regulatory capability flags API was implemented,
the flag to disable 11ax was defined as bit 13, but this was later
changed and the bit remained as bit 10, like in version 1.  This was
never changed in the driver, so we were checking for the wrong bit in
newer devices.  Fix it.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Fixes: e27c506a985c ("iwlwifi: regulatory: regulatory capabilities api change")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210326125611.6d28516b59cd.Id0248d5e4662695254f49ce37b0268834ed52918@changeid
3 years agobrcmfmac: p2p: Fix recently introduced deadlock issue
Hans de Goede [Sat, 13 Mar 2021 14:36:35 +0000 (15:36 +0100)]
brcmfmac: p2p: Fix recently introduced deadlock issue

Commit a05829a7222e ("cfg80211: avoid holding the RTNL when calling the
driver") replaced the rtnl_lock parameter passed to various brcmf
functions with just lock, because since that commit it is not just
about the rtnl_lock but also about the wiphy_lock .

During this search/replace the "if (!rtnl_locked)" check in brcmfmac/p2p.c
was accidentally replaced with "if (locked)", dropping the inversion of
the check. This causes the code to now call rtnl_lock() while already
holding the lock, causing a deadlock.

Add back the "!" to the if-condition to fix this.

Cc: Johannes Berg <johannes.berg@intel.com>
Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210313143635.109154-1-hdegoede@redhat.com
3 years agomt76: mt7921: fix airtime reporting
Lorenzo Bianconi [Tue, 9 Mar 2021 10:09:03 +0000 (11:09 +0100)]
mt76: mt7921: fix airtime reporting

Fix {tx,rx}_airtime reporting for mt7921 driver. Wrong register definitions
trigger a tx hangs before resetting airtime stats.

Fixes: 163f4d22c118d ("mt76: mt7921: add MAC support")
Tested-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/c05333be0e3e85a50a71bb2de81034fe425e3701.1615284335.git.lorenzo@kernel.org
3 years agoiwlwifi: Fix softirq/hardirq disabling in iwl_pcie_enqueue_hcmd()
Jiri Kosina [Tue, 2 Mar 2021 10:26:55 +0000 (11:26 +0100)]
iwlwifi: Fix softirq/hardirq disabling in iwl_pcie_enqueue_hcmd()

It's possible for iwl_pcie_enqueue_hcmd() to be called with hard IRQs
disabled (e.g. from LED core). We can't enable BHs in such a situation.

Turn the unconditional BH-enable/BH-disable code into
hardirq-disable/conditional-enable.

This fixes the warning below.

 WARNING: CPU: 1 PID: 1139 at kernel/softirq.c:178 __local_bh_enable_ip+0xa5/0xf0
 CPU: 1 PID: 1139 Comm: NetworkManager Not tainted 5.12.0-rc1-00004-gb4ded168af79 #7
 Hardware name: LENOVO 20K5S22R00/20K5S22R00, BIOS R0IET38W (1.16 ) 05/31/2017
 RIP: 0010:__local_bh_enable_ip+0xa5/0xf0
 Code: f7 69 e8 ee 23 14 00 fb 66 0f 1f 44 00 00 65 8b 05 f0 f4 f7 69 85 c0 74 3f 48 83 c4 08 5b c3 65 8b 05 9b fe f7 69 85 c0 75 8e <0f> 0b eb 8a 48 89 3c 24 e8 4e 20 14 00 48 8b 3c 24 eb 91 e8 13 4e
 RSP: 0018:ffffafd580b13298 EFLAGS: 00010046
 RAX: 0000000000000000 RBX: 0000000000000201 RCX: 0000000000000000
 RDX: 0000000000000003 RSI: 0000000000000201 RDI: ffffffffc1272389
 RBP: ffff96517ae4c018 R08: 0000000000000001 R09: 0000000000000000
 R10: ffffafd580b13178 R11: 0000000000000001 R12: ffff96517b060000
 R13: 0000000000000000 R14: ffffffff80000000 R15: 0000000000000001
 FS:  00007fc604ebefc0(0000) GS:ffff965267480000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 000055fb3fef13b2 CR3: 0000000109112004 CR4: 00000000003706e0
 Call Trace:
  ? _raw_spin_unlock_bh+0x1f/0x30
  iwl_pcie_enqueue_hcmd+0x5d9/0xa00 [iwlwifi]
  iwl_trans_txq_send_hcmd+0x6c/0x430 [iwlwifi]
  iwl_trans_send_cmd+0x88/0x170 [iwlwifi]
  ? lock_acquire+0x277/0x3d0
  iwl_mvm_send_cmd+0x32/0x80 [iwlmvm]
  iwl_mvm_led_set+0xc2/0xe0 [iwlmvm]
  ? led_trigger_event+0x46/0x70
  led_trigger_event+0x46/0x70
  ieee80211_do_open+0x5c5/0xa20 [mac80211]
  ieee80211_open+0x67/0x90 [mac80211]
  __dev_open+0xd4/0x150
  __dev_change_flags+0x19e/0x1f0
  dev_change_flags+0x23/0x60
  do_setlink+0x30d/0x1230
  ? lock_is_held_type+0xb4/0x120
  ? __nla_validate_parse.part.7+0x57/0xcb0
  ? __lock_acquire+0x2e1/0x1a50
  __rtnl_newlink+0x560/0x910
  ? __lock_acquire+0x2e1/0x1a50
  ? __lock_acquire+0x2e1/0x1a50
  ? lock_acquire+0x277/0x3d0
  ? sock_def_readable+0x5/0x290
  ? lock_is_held_type+0xb4/0x120
  ? find_held_lock+0x2d/0x90
  ? sock_def_readable+0xb3/0x290
  ? lock_release+0x166/0x2a0
  ? lock_is_held_type+0x90/0x120
  rtnl_newlink+0x47/0x70
  rtnetlink_rcv_msg+0x25c/0x470
  ? netlink_deliver_tap+0x97/0x3e0
  ? validate_linkmsg+0x350/0x350
  netlink_rcv_skb+0x50/0x100
  netlink_unicast+0x1b2/0x280
  netlink_sendmsg+0x336/0x450
  sock_sendmsg+0x5b/0x60
  ____sys_sendmsg+0x1ed/0x250
  ? copy_msghdr_from_user+0x5c/0x90
  ___sys_sendmsg+0x88/0xd0
  ? lock_is_held_type+0xb4/0x120
  ? find_held_lock+0x2d/0x90
  ? lock_release+0x166/0x2a0
  ? __fget_files+0xfe/0x1d0
  ? __sys_sendmsg+0x5e/0xa0
  __sys_sendmsg+0x5e/0xa0
  ? lockdep_hardirqs_on_prepare+0xd9/0x170
  do_syscall_64+0x33/0x80
  entry_SYSCALL_64_after_hwframe+0x44/0xae
 RIP: 0033:0x7fc605c9572d
 Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 da ee ff ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 44 24 08 e8 2e ef ff ff 48
 RSP: 002b:00007fffc83789f0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e
 RAX: ffffffffffffffda RBX: 000055ef468570c0 RCX: 00007fc605c9572d
 RDX: 0000000000000000 RSI: 00007fffc8378a30 RDI: 000000000000000c
 RBP: 0000000000000010 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000
 R13: 00007fffc8378b80 R14: 00007fffc8378b7c R15: 0000000000000000
 irq event stamp: 170785
 hardirqs last  enabled at (170783): [<ffffffff9609a8c2>] __local_bh_enable_ip+0x82/0xf0
 hardirqs last disabled at (170784): [<ffffffff96a8613d>] _raw_read_lock_irqsave+0x8d/0x90
 softirqs last  enabled at (170782): [<ffffffffc1272389>] iwl_pcie_enqueue_hcmd+0x5d9/0xa00 [iwlwifi]
 softirqs last disabled at (170785): [<ffffffffc1271ec6>] iwl_pcie_enqueue_hcmd+0x116/0xa00 [iwlwifi]

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v12.0.0-rc3
Acked-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2103021125430.12405@cbobk.fhfr.pm
3 years agoMerge git://git.kernel.org:/pub/scm/linux/kernel/git/netdev/net
Linus Torvalds [Wed, 10 Mar 2021 01:15:56 +0000 (17:15 -0800)]
Merge git://git.kernel.org:/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from David Miller:

 1) Fix transmissions in dynamic SMPS mode in ath9k, from Felix Fietkau.

 2) TX skb error handling fix in mt76 driver, also from Felix.

 3) Fix BPF_FETCH atomic in x86 JIT, from Brendan Jackman.

 4) Avoid double free of percpu pointers when freeing a cloned bpf prog.
    From Cong Wang.

 5) Use correct printf format for dma_addr_t in ath11k, from Geert
    Uytterhoeven.

 6) Fix resolve_btfids build with older toolchains, from Kun-Chuan
    Hsieh.

 7) Don't report truncated frames to mac80211 in mt76 driver, from
    Lorenzop Bianconi.

 8) Fix watcdog timeout on suspend/resume of stmmac, from Joakim Zhang.

 9) mscc ocelot needs NET_DEVLINK selct in Kconfig, from Arnd Bergmann.

10) Fix sign comparison bug in TCP_ZEROCOPY_RECEIVE getsockopt(), from
    Arjun Roy.

11) Ignore routes with deleted nexthop object in mlxsw, from Ido
    Schimmel.

12) Need to undo tcp early demux lookup sometimes in nf_nat, from
    Florian Westphal.

13) Fix gro aggregation for udp encaps with zero csum, from Daniel
    Borkmann.

14) Make sure to always use imp*_ndo_send when necessaey, from Jason A.
    Donenfeld.

15) Fix TRSCER masks in sh_eth driver from Sergey Shtylyov.

16) prevent overly huge skb allocationsd in qrtr, from Pavel Skripkin.

17) Prevent rx ring copnsumer index loss of sync in enetc, from Vladimir
    Oltean.

18) Make sure textsearch copntrol block is large enough, from Wilem de
    Bruijn.

19) Revert MAC changes to r8152 leading to instability, from Hates Wang.

20) Advance iov in 9p even for empty reads, from Jissheng Zhang.

21) Double hook unregister in nftables, from PabloNeira Ayuso.

22) Fix memleak in ixgbe, fropm Dinghao Liu.

23) Avoid dups in pkt scheduler class dumps, from Maximilian Heyne.

24) Various mptcp fixes from Florian Westphal, Paolo Abeni, and Geliang
    Tang.

25) Fix DOI refcount bugs in cipso, from Paul Moore.

26) One too many irqsave in ibmvnic, from Junlin Yang.

27) Fix infinite loop with MPLS gso segmenting via virtio_net, from
    Balazs Nemeth.

* git://git.kernel.org:/pub/scm/linux/kernel/git/netdev/net: (164 commits)
  s390/qeth: fix notification for pending buffers during teardown
  s390/qeth: schedule TX NAPI on QAOB completion
  s390/qeth: improve completion of pending TX buffers
  s390/qeth: fix memory leak after failed TX Buffer allocation
  net: avoid infinite loop in mpls_gso_segment when mpls_hlen == 0
  net: check if protocol extracted by virtio_net_hdr_set_proto is correct
  net: dsa: xrs700x: check if partner is same as port in hsr join
  net: lapbether: Remove netif_start_queue / netif_stop_queue
  atm: idt77252: fix null-ptr-dereference
  atm: uPD98402: fix incorrect allocation
  atm: fix a typo in the struct description
  net: qrtr: fix error return code of qrtr_sendmsg()
  mptcp: fix length of ADD_ADDR with port sub-option
  net: bonding: fix error return code of bond_neigh_init()
  net: enetc: allow hardware timestamping on TX queues with tc-etf enabled
  net: enetc: set MAC RX FIFO to recommended value
  net: davicom: Use platform_get_irq_optional()
  net: davicom: Fix regulator not turned off on driver removal
  net: davicom: Fix regulator not turned off on failed probe
  net: dsa: fix switchdev objects on bridge master mistakenly being applied on ports
  ...

3 years agoMerge git://git.kernel.org:/pub/scm/linux/kernel/git/davem/sparc
Linus Torvalds [Wed, 10 Mar 2021 01:08:41 +0000 (17:08 -0800)]
Merge git://git.kernel.org:/pub/scm/linux/kernel/git/davem/sparc

Pull sparc fixes from David Miller:
 "Fix opcode filtering for exceptions, and clean up defconfig"

* git://git.kernel.org:/pub/scm/linux/kernel/git/davem/sparc:
  sparc: sparc64_defconfig: remove duplicate CONFIGs
  sparc64: Fix opcode filtering in handling of no fault loads

3 years agosparc: sparc64_defconfig: remove duplicate CONFIGs
Corentin Labbe [Mon, 8 Mar 2021 09:51:26 +0000 (09:51 +0000)]
sparc: sparc64_defconfig: remove duplicate CONFIGs

After my patch there is CONFIG_ATA defined twice.
Remove the duplicate one.
Same problem for CONFIG_HAPPYMEAL, except I added as builtin for boot
test with NFS.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: a57cdeb369ef ("sparc: sparc64_defconfig: add necessary configs for qemu")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agosparc64: Fix opcode filtering in handling of no fault loads
Rob Gardner [Mon, 1 Mar 2021 05:48:16 +0000 (22:48 -0700)]
sparc64: Fix opcode filtering in handling of no fault loads

is_no_fault_exception() has two bugs which were discovered via random
opcode testing with stress-ng. Both are caused by improper filtering
of opcodes.

The first bug can be triggered by a floating point store with a no-fault
ASI, for instance "sta %f0, [%g0] #ASI_PNF", opcode C1A01040.

The code first tests op3[5] (0x1000000), which denotes a floating
point instruction, and then tests op3[2] (0x200000), which denotes a
store instruction. But these bits are not mutually exclusive, and the
above mentioned opcode has both bits set. The intent is to filter out
stores, so the test for stores must be done first in order to have
any effect.

The second bug can be triggered by a floating point load with one of
the invalid ASI values 0x8e or 0x8f, which pass this check in
is_no_fault_exception():
     if ((asi & 0xf2) == ASI_PNF)

An example instruction is "ldqa [%l7 + %o7] #ASI 0x8f, %f38",
opcode CF95D1EF. Asi values greater than 0x8b (ASI_SNFL) are fatal
in handle_ldf_stq(), and is_no_fault_exception() must not allow these
invalid asi values to make it that far.

In both of these cases, handle_ldf_stq() reacts by calling
sun4v_data_access_exception() or spitfire_data_access_exception(),
which call is_no_fault_exception() and results in an infinite
recursion.

Signed-off-by: Rob Gardner <rob.gardner@oracle.com>
Tested-by: Anatoly Pugachev <matorola@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge branch 's390-qeth-fixes'
David S. Miller [Wed, 10 Mar 2021 00:14:54 +0000 (16:14 -0800)]
Merge branch 's390-qeth-fixes'

Julian Wiedmann says:

====================
s390/qeth: fixes 2021-03-09

please apply the following patch series to netdev's net tree.

This brings one fix for a memleak in an error path of the setup code.
Also several fixes for dealing with pending TX buffers - two for old
bugs in their completion handling, and one recent regression in a
teardown path.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agos390/qeth: fix notification for pending buffers during teardown
Julian Wiedmann [Tue, 9 Mar 2021 16:52:21 +0000 (17:52 +0100)]
s390/qeth: fix notification for pending buffers during teardown

The cited commit reworked the state machine for pending TX buffers.
In qeth_iqd_tx_complete() it turned PENDING into a transient state, and
uses NEED_QAOB for buffers that get parked while waiting for their QAOB
completion.

But it missed to adjust the check in qeth_tx_complete_buf(). So if
qeth_tx_complete_pending_bufs() is called during teardown to drain
the parked TX buffers, we no longer raise a notification for af_iucv.

Instead of updating the checked state, just move this code into
qeth_tx_complete_pending_bufs() itself. This also gets rid of the
special-case in the common TX completion path.

Fixes: 8908f36d20d8 ("s390/qeth: fix af_iucv notification race")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agos390/qeth: schedule TX NAPI on QAOB completion
Julian Wiedmann [Tue, 9 Mar 2021 16:52:20 +0000 (17:52 +0100)]
s390/qeth: schedule TX NAPI on QAOB completion

When a QAOB notifies us that a pending TX buffer has been delivered, the
actual TX completion processing by qeth_tx_complete_pending_bufs()
is done within the context of a TX NAPI instance. We shouldn't rely on
this instance being scheduled by some other TX event, but just do it
ourselves.

qeth_qdio_handle_aob() is called from qeth_poll(), ie. our main NAPI
instance. To avoid touching the TX queue's NAPI instance
before/after it is (un-)registered, reorder the code in qeth_open()
and qeth_stop() accordingly.

Fixes: 0da9581ddb0f ("qeth: exploit asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agos390/qeth: improve completion of pending TX buffers
Julian Wiedmann [Tue, 9 Mar 2021 16:52:19 +0000 (17:52 +0100)]
s390/qeth: improve completion of pending TX buffers

The current design attaches a pending TX buffer to a custom
single-linked list, which is anchored at the buffer's slot on the
TX ring. The buffer is then checked for final completion whenever
this slot is processed during a subsequent TX NAPI poll cycle.

But if there's insufficient traffic on the ring, we might never make
enough progress to get back to this ring slot and discover the pending
buffer's final TX completion. In particular if this missing TX
completion blocks the application from sending further traffic.

So convert the custom single-linked list code to a per-queue list_head,
and scan this list on every TX NAPI cycle.

Fixes: 0da9581ddb0f ("qeth: exploit asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agos390/qeth: fix memory leak after failed TX Buffer allocation
Julian Wiedmann [Tue, 9 Mar 2021 16:52:18 +0000 (17:52 +0100)]
s390/qeth: fix memory leak after failed TX Buffer allocation

When qeth_alloc_qdio_queues() fails to allocate one of the buffers that
back an Output Queue, the 'out_freeoutqbufs' path will free all
previously allocated buffers for this queue. But it misses to free the
half-finished queue struct itself.

Move the buffer allocation into qeth_alloc_output_queue(), and deal with
such errors internally.

Fixes: 0da9581ddb0f ("qeth: exploit asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge branch 'virtio_net-infinite-loop'
David S. Miller [Wed, 10 Mar 2021 00:12:20 +0000 (16:12 -0800)]
Merge branch 'virtio_net-infinite-loop'

Balazs Nemeth says:

====================
net: prevent infinite loop caused by incorrect proto from virtio_net_hdr_set_proto

These patches prevent an infinite loop for gso packets with a protocol
from virtio net hdr that doesn't match the protocol in the packet.
Note that packets coming from a device without
header_ops->parse_protocol being implemented will not be caught by
the check in virtio_net_hdr_to_skb, but the infinite loop will still
be prevented by the check in the gso layer.

Changes from v2 to v3:
  - Remove unused *eth.
  - Use MPLS_HLEN to also check if the MPLS header length is a multiple
    of four.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: avoid infinite loop in mpls_gso_segment when mpls_hlen == 0
Balazs Nemeth [Tue, 9 Mar 2021 11:31:01 +0000 (12:31 +0100)]
net: avoid infinite loop in mpls_gso_segment when mpls_hlen == 0

A packet with skb_inner_network_header(skb) == skb_network_header(skb)
and ETH_P_MPLS_UC will prevent mpls_gso_segment from pulling any headers
from the packet. Subsequently, the call to skb_mac_gso_segment will
again call mpls_gso_segment with the same packet leading to an infinite
loop. In addition, ensure that the header length is a multiple of four,
which should hold irrespective of the number of stacked labels.

Signed-off-by: Balazs Nemeth <bnemeth@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: check if protocol extracted by virtio_net_hdr_set_proto is correct
Balazs Nemeth [Tue, 9 Mar 2021 11:31:00 +0000 (12:31 +0100)]
net: check if protocol extracted by virtio_net_hdr_set_proto is correct

For gso packets, virtio_net_hdr_set_proto sets the protocol (if it isn't
set) based on the type in the virtio net hdr, but the skb could contain
anything since it could come from packet_snd through a raw socket. If
there is a mismatch between what virtio_net_hdr_set_proto sets and
the actual protocol, then the skb could be handled incorrectly later
on.

An example where this poses an issue is with the subsequent call to
skb_flow_dissect_flow_keys_basic which relies on skb->protocol being set
correctly. A specially crafted packet could fool
skb_flow_dissect_flow_keys_basic preventing EINVAL to be returned.

Avoid blindly trusting the information provided by the virtio net header
by checking that the protocol in the packet actually matches the
protocol set by virtio_net_hdr_set_proto. Note that since the protocol
is only checked if skb->dev implements header_ops->parse_protocol,
packets from devices without the implementation are not checked at this
stage.

Fixes: 9274124f023b ("net: stricter validation of untrusted gso packets")
Signed-off-by: Balazs Nemeth <bnemeth@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: dsa: xrs700x: check if partner is same as port in hsr join
George McCollister [Mon, 8 Mar 2021 23:38:22 +0000 (17:38 -0600)]
net: dsa: xrs700x: check if partner is same as port in hsr join

Don't assign dp to partner if it's the same port that xrs700x_hsr_join
was called with. The partner port is supposed to be the other port in
the HSR/PRP redundant pair not the same port. This fixes an issue
observed in testing where forwarding between redundant HSR ports on this
switch didn't work depending on the order the ports were added to the
hsr device.

Fixes: bd62e6f5e6a9 ("net: dsa: xrs700x: add HSR offloading support")
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge tag 'gpio-fixes-for-v5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Tue, 9 Mar 2021 20:02:18 +0000 (12:02 -0800)]
Merge tag 'gpio-fixes-for-v5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

Pull gpio fixes from Bartosz Golaszewski:
 "A bunch of fixes for the GPIO subsystem. We have two regressions in
  the core code spotted right after the merge window, a series of fixes
  for ACPI GPIO and a subsequent fix for a related regression in
  gpio-pca953x + a minor tweak in .gitignore and a rework of handling of
  the gpio-line-names to remedy a regression in stm32mp151.

  Summary:

   - fix two regressions in core GPIO subsystem code: one NULL-pointer
     dereference and one list corruption

   - read GPIO line names from fwnode instead of using the generic
     device properties to fix a regression on stm32mp151

   - fixes to ACPI GPIO and gpio-pca953x to handle a regression in IRQ
     handling on Intel Galileo

   - update .gitignore in GPIO selftests"

* tag 'gpio-fixes-for-v5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpiolib: Read "gpio-line-names" from a firmware node
  gpio: pca953x: Set IRQ type when handle Intel Galileo Gen 2
  gpiolib: acpi: Allow to find GpioInt() resource by name and index
  gpiolib: acpi: Add ACPI_GPIO_QUIRK_ABSOLUTE_NUMBER quirk
  gpiolib: acpi: Add missing IRQF_ONESHOT
  gpio: fix gpio-device list corruption
  gpio: fix NULL-deref-on-deregistration regression
  selftests: gpio: update .gitignore

3 years agoMerge tag 'mips-fixes_5.12_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips...
Linus Torvalds [Tue, 9 Mar 2021 19:56:41 +0000 (11:56 -0800)]
Merge tag 'mips-fixes_5.12_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS fixes from Thomas Bogendoerfer:

 - fixes for boot breakage because of misaligned FDTs

 - fix for overwritten exception handlers

 - enable MIPS optimized crypto for all MIPS CPUs to improve wireguard
   performance

* tag 'mips-fixes_5.12_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: kernel: Reserve exception base early to prevent corruption
  MIPS: vmlinux.lds.S: align raw appended dtb to 8 bytes
  crypto: mips/poly1305 - enable for all MIPS processors
  MIPS: boot/compressed: Copy DTB to aligned address

3 years agonet: lapbether: Remove netif_start_queue / netif_stop_queue
Xie He [Sun, 7 Mar 2021 11:33:07 +0000 (03:33 -0800)]
net: lapbether: Remove netif_start_queue / netif_stop_queue

For the devices in this driver, the default qdisc is "noqueue",
because their "tx_queue_len" is 0.

In function "__dev_queue_xmit" in "net/core/dev.c", devices with the
"noqueue" qdisc are specially handled. Packets are transmitted without
being queued after a "dev->flags & IFF_UP" check. However, it's possible
that even if this check succeeds, "ops->ndo_stop" may still have already
been called. This is because in "__dev_close_many", "ops->ndo_stop" is
called before clearing the "IFF_UP" flag.

If we call "netif_stop_queue" in "ops->ndo_stop", then it's possible in
"__dev_queue_xmit", it sees the "IFF_UP" flag is present, and then it
checks "netif_xmit_stopped" and finds that the queue is already stopped.
In this case, it will complain that:
"Virtual device ... asks to queue packet!"

To prevent "__dev_queue_xmit" from generating this complaint, we should
not call "netif_stop_queue" in "ops->ndo_stop".

We also don't need to call "netif_start_queue" in "ops->ndo_open",
because after a netdev is allocated and registered, the
"__QUEUE_STATE_DRV_XOFF" flag is initially not set, so there is no need
to call "netif_start_queue" to clear it.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMIPS: kernel: Reserve exception base early to prevent corruption
Thomas Bogendoerfer [Mon, 8 Mar 2021 09:24:47 +0000 (10:24 +0100)]
MIPS: kernel: Reserve exception base early to prevent corruption

BMIPS is one of the few platforms that do change the exception base.
After commit 2dcb39645441 ("memblock: do not start bottom-up allocations
with kernel_end") we started seeing BMIPS boards fail to boot with the
built-in FDT being corrupted.

Before the cited commit, early allocations would be in the [kernel_end,
RAM_END] range, but after commit they would be within [RAM_START +
PAGE_SIZE, RAM_END].

The custom exception base handler that is installed by
bmips_ebase_setup() done for BMIPS5000 CPUs ends-up trampling on the
memory region allocated by unflatten_and_copy_device_tree() thus
corrupting the FDT used by the kernel.

To fix this, we need to perform an early reservation of the custom
exception space. Additional we reserve the first 4k (1k for R3k) for
either normal exception vector space (legacy CPUs) or special vectors
like cache exceptions.

Huge thanks to Serge for analysing and proposing a solution to this
issue.

Fixes: 2dcb39645441 ("memblock: do not start bottom-up allocations with kernel_end")
Reported-by: Kamal Dasu <kdasu.kdev@gmail.com>
Debugged-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
3 years agoMerge git://git.kernel.org:/pub/scm/linux/kernel/git/davem/sparc
Linus Torvalds [Tue, 9 Mar 2021 06:01:58 +0000 (22:01 -0800)]
Merge git://git.kernel.org:/pub/scm/linux/kernel/git/davem/sparc

Pull sparc updates from David Miller:
 "Just some more random bits from Al, including a conversion over to
  generic extables"

* git://git.kernel.org:/pub/scm/linux/kernel/git/davem/sparc:
  sparc32: take ->thread.flags out
  sparc32: get rid of fake_swapper_regs
  sparc64: get rid of fake_swapper_regs
  sparc32: switch to generic extables
  sparc32: switch copy_user.S away from range exception table entries
  sparc32: get rid of range exception table entries in checksum_32.S
  sparc32: switch __bzero() away from range exception table entries
  sparc32: kill lookup_fault()
  sparc32: don't bother with lookup_fault() in __bzero()

3 years agoatm: idt77252: fix null-ptr-dereference
Tong Zhang [Mon, 8 Mar 2021 03:25:30 +0000 (22:25 -0500)]
atm: idt77252: fix null-ptr-dereference

this one is similar to the phy_data allocation fix in uPD98402, the
driver allocate the idt77105_priv and store to dev_data but later
dereference using dev->dev_data, which will cause null-ptr-dereference.

fix this issue by changing dev_data to phy_data so that PRIV(dev) can
work correctly.

Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoatm: uPD98402: fix incorrect allocation
Tong Zhang [Mon, 8 Mar 2021 03:25:29 +0000 (22:25 -0500)]
atm: uPD98402: fix incorrect allocation

dev->dev_data is set in zatm.c, calling zatm_start() will overwrite this
dev->dev_data in uPD98402_start() and a subsequent PRIV(dev)->lock
(i.e dev->phy_data->lock) will result in a null-ptr-dereference.

I believe this is a typo and what it actually want to do is to allocate
phy_data instead of dev_data.

Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoatm: fix a typo in the struct description
Tong Zhang [Mon, 8 Mar 2021 03:25:28 +0000 (22:25 -0500)]
atm: fix a typo in the struct description

phy_data means private PHY data not date

Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: qrtr: fix error return code of qrtr_sendmsg()
Jia-Ju Bai [Mon, 8 Mar 2021 09:13:55 +0000 (01:13 -0800)]
net: qrtr: fix error return code of qrtr_sendmsg()

When sock_alloc_send_skb() returns NULL to skb, no error return code of
qrtr_sendmsg() is assigned.
To fix this bug, rc is assigned with -ENOMEM in this case.

Fixes: 194ccc88297a ("net: qrtr: Support decoding incoming v2 packets")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agomptcp: fix length of ADD_ADDR with port sub-option
Davide Caratti [Mon, 8 Mar 2021 09:00:04 +0000 (10:00 +0100)]
mptcp: fix length of ADD_ADDR with port sub-option

in current Linux, MPTCP peers advertising endpoints with port numbers use
a sub-option length that wrongly accounts for the trailing TCP NOP. Also,
receivers will only process incoming ADD_ADDR with port having such wrong
sub-option length. Fix this, making ADD_ADDR compliant to RFC8684 Â§3.4.1.

this can be verified running tcpdump on the kselftests artifacts:

 unpatched kernel:
 [root@bottarga mptcp]# tcpdump -tnnr unpatched.pcap | grep add-addr
 reading from file unpatched.pcap, link-type LINUX_SLL (Linux cooked v1), snapshot length 65535
 IP 10.0.1.1.10000 > 10.0.1.2.53078: Flags [.], ack 101, win 509, options [nop,nop,TS val 214459678 ecr 521312851,mptcp add-addr v1 id 1 a00:201:2774:2d88:7436:85c3:17fd:101], length 0
 IP 10.0.1.2.53078 > 10.0.1.1.10000: Flags [.], ack 101, win 502, options [nop,nop,TS val 521312852 ecr 214459678,mptcp add-addr[bad opt]]

 patched kernel:
 [root@bottarga mptcp]# tcpdump -tnnr patched.pcap | grep add-addr
 reading from file patched.pcap, link-type LINUX_SLL (Linux cooked v1), snapshot length 65535
 IP 10.0.1.1.10000 > 10.0.1.2.38178: Flags [.], ack 101, win 509, options [nop,nop,TS val 3728873902 ecr 2732713192,mptcp add-addr v1 id 1 10.0.2.1:10100 hmac 0xbccdfcbe59292a1f,nop,nop], length 0
 IP 10.0.1.2.38178 > 10.0.1.1.10000: Flags [.], ack 101, win 502, options [nop,nop,TS val 2732713195 ecr 3728873902,mptcp add-addr v1-echo id 1 10.0.2.1:10100,nop,nop], length 0

Fixes: 22fb85ffaefb ("mptcp: add port support for ADD_ADDR suboption writing")
CC: stable@vger.kernel.org # 5.11+
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Acked-and-tested-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: bonding: fix error return code of bond_neigh_init()
Jia-Ju Bai [Mon, 8 Mar 2021 03:11:02 +0000 (19:11 -0800)]
net: bonding: fix error return code of bond_neigh_init()

When slave is NULL or slave_ops->ndo_neigh_setup is NULL, no error
return code of bond_neigh_init() is assigned.
To fix this bug, ret is assigned with -EINVAL in these cases.

Fixes: 9e99bfefdbce ("bonding: fix bond_neigh_init()")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: enetc: allow hardware timestamping on TX queues with tc-etf enabled
Vladimir Oltean [Sun, 7 Mar 2021 13:23:39 +0000 (15:23 +0200)]
net: enetc: allow hardware timestamping on TX queues with tc-etf enabled

The txtime is passed to the driver in skb->skb_mstamp_ns, which is
actually in a union with skb->tstamp (the place where software
timestamps are kept).

Since commit b50a5c70ffa4 ("net: allow simultaneous SW and HW transmit
timestamping"), __sock_recv_timestamp has some logic for making sure
that the two calls to skb_tstamp_tx:

skb_tx_timestamp(skb) # Software timestamp in the driver
-> skb_tstamp_tx(skb, NULL)

and

skb_tstamp_tx(skb, &shhwtstamps) # Hardware timestamp in the driver

will both do the right thing and in a race-free manner, meaning that
skb_tx_timestamp will deliver a cmsg with the software timestamp only,
and skb_tstamp_tx with a non-NULL hwtstamps argument will deliver a cmsg
with the hardware timestamp only.

Why are races even possible? Well, because although the software timestamp
skb->tstamp is private per skb, the hardware timestamp skb_hwtstamps(skb)
lives in skb_shinfo(skb), an area which is shared between skbs and their
clones. And skb_tstamp_tx works by cloning the packets when timestamping
them, therefore attempting to perform hardware timestamping on an skb's
clone will also change the hardware timestamp of the original skb. And
the original skb might have been yet again cloned for software
timestamping, at an earlier stage.

So the logic in __sock_recv_timestamp can't be as simple as saying
"does this skb have a hardware timestamp? if yes I'll send the hardware
timestamp to the socket, otherwise I'll send the software timestamp",
precisely because the hardware timestamp is shared.
Instead, it's quite the other way around: __sock_recv_timestamp says
"does this skb have a software timestamp? if yes, I'll send the software
timestamp, otherwise the hardware one". This works because the software
timestamp is not shared with clones.

But that means we have a problem when we attempt hardware timestamping
with skbs that don't have the skb->tstamp == 0. __sock_recv_timestamp
will say "oh, yeah, this must be some sort of odd clone" and will not
deliver the hardware timestamp to the socket. And this is exactly what
is happening when we have txtime enabled on the socket: as mentioned,
that is put in a union with skb->tstamp, so it is quite easy to mistake
it.

Do what other drivers do (intel igb/igc) and write zero to skb->tstamp
before taking the hardware timestamp. It's of no use to us now (we're
already on the TX confirmation path).

Fixes: 0d08c9ec7d6e ("enetc: add support time specific departure base on the qos etf")
Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: enetc: set MAC RX FIFO to recommended value
Alex Marginean [Sun, 7 Mar 2021 13:23:38 +0000 (15:23 +0200)]
net: enetc: set MAC RX FIFO to recommended value

On LS1028A, the MAC RX FIFO defaults to the value 2, which is too high
and may lead to RX lock-up under traffic at a rate higher than 6 Gbps.
Set it to 1 instead, as recommended by the hardware design team and by
later versions of the ENETC block guide.

Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Jason Liu <jason.hui.liu@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: davicom: Use platform_get_irq_optional()
Paul Cercueil [Sun, 7 Mar 2021 13:17:49 +0000 (13:17 +0000)]
net: davicom: Use platform_get_irq_optional()

The second IRQ line really is optional, so use
platform_get_irq_optional() to obtain it.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: davicom: Fix regulator not turned off on driver removal
Paul Cercueil [Sun, 7 Mar 2021 13:17:48 +0000 (13:17 +0000)]
net: davicom: Fix regulator not turned off on driver removal

We must disable the regulator that was enabled in the probe function.

Fixes: 7994fe55a4a2 ("dm9000: Add regulator and reset support to dm9000")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: davicom: Fix regulator not turned off on failed probe
Paul Cercueil [Sun, 7 Mar 2021 13:17:47 +0000 (13:17 +0000)]
net: davicom: Fix regulator not turned off on failed probe

When the probe fails or requests to be defered, we must disable the
regulator that was previously enabled.

Fixes: 7994fe55a4a2 ("dm9000: Add regulator and reset support to dm9000")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: dsa: fix switchdev objects on bridge master mistakenly being applied on ports
Vladimir Oltean [Sun, 7 Mar 2021 10:21:56 +0000 (12:21 +0200)]
net: dsa: fix switchdev objects on bridge master mistakenly being applied on ports

Tobias reports that after the blamed patch, VLAN objects being added to
a bridge device are being added to all slave ports instead (swp2, swp3).

ip link add br0 type bridge vlan_filtering 1
ip link set swp2 master br0
ip link set swp3 master br0
bridge vlan add dev br0 vid 100 self

This is because the fix was too broad: we made dsa_port_offloads_netdev
say "yes, I offload the br0 bridge" for all slave ports, but we didn't
add the checks whether the switchdev object was in fact meant for the
physical port or for the bridge itself. So we are reacting on events in
a way in which we shouldn't.

The reason why the fix was too broad is because the question itself,
"does this DSA port offload this netdev", was too broad in the first
place. The solution is to disambiguate the question and separate it into
two different functions, one to be called for each switchdev attribute /
object that has an orig_dev == net_bridge (dsa_port_offloads_bridge),
and the other for orig_dev == net_bridge_port (*_offloads_bridge_port).

In the case of VLAN objects on the bridge interface, this solves the
problem because we know that VLAN objects are per bridge port and not
per bridge. And when orig_dev is equal to the net_bridge, we offload it
as a bridge, but not as a bridge port; that's how we are able to skip
reacting on those events. Note that this is compatible with future plans
to have explicit offloading of VLAN objects on the bridge interface as a
bridge port (in DSA, this signifies that we should add that VLAN towards
the CPU port).

Fixes: 99b8202b179f ("net: dsa: fix SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING getting ignored")
Reported-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Tested-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: wan: fix error return code of uhdlc_init()
Jia-Ju Bai [Sun, 7 Mar 2021 09:12:56 +0000 (01:12 -0800)]
net: wan: fix error return code of uhdlc_init()

When priv->rx_skbuff or priv->tx_skbuff is NULL, no error return code of
uhdlc_init() is assigned.
To fix this bug, ret is assigned with -ENOMEM in these cases.

Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: hisilicon: hns: fix error return code of hns_nic_clear_all_rx_fetch()
Jia-Ju Bai [Sun, 7 Mar 2021 08:40:12 +0000 (00:40 -0800)]
net: hisilicon: hns: fix error return code of hns_nic_clear_all_rx_fetch()

When hns_assemble_skb() returns NULL to skb, no error return code of
hns_nic_clear_all_rx_fetch() is assigned.
To fix this bug, ret is assigned with -ENOMEM in this case.

Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: usb: log errors to dmesg/syslog
Grant Grundler [Sat, 6 Mar 2021 22:12:32 +0000 (14:12 -0800)]
net: usb: log errors to dmesg/syslog

Errors in protocol should be logged when the driver aborts operations.
If the driver can carry on and "humor" the device, then emitting
the message as debug output level is fine.

Signed-off-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: usb: cdc_ncm: emit dev_err on error paths
Grant Grundler [Sat, 6 Mar 2021 22:12:31 +0000 (14:12 -0800)]
net: usb: cdc_ncm: emit dev_err on error paths

Several error paths in bind/probe code will only emit
output using dev_dbg. But if we are going to fail the
bind/probe, emit related output with "err" priority.

Signed-off-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: ethernet: chelsio: inline_crypto: Mundane typos fixed throughout the file chcr_k...
Bhaskar Chowdhury [Sat, 6 Mar 2021 21:20:28 +0000 (02:50 +0530)]
net: ethernet: chelsio: inline_crypto: Mundane typos fixed throughout the file chcr_ktls.c

Mundane typos fixes throughout the file.

s/establised/established/
s/availbale/available/
s/vaues/values/
s/Incase/In case/

Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: dsa: bcm_sf2: simplify optional reset handling
Philipp Zabel [Fri, 5 Mar 2021 09:14:48 +0000 (10:14 +0100)]
net: dsa: bcm_sf2: simplify optional reset handling

As of commit bb475230b8e5 ("reset: make optional functions really
optional"), the reset framework API calls use NULL pointers to describe
optional, non-present reset controls.

This allows to unconditionally return errors from
devm_reset_control_get_optional_exclusive.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMIPS: vmlinux.lds.S: align raw appended dtb to 8 bytes
Bjørn Mork [Sun, 7 Mar 2021 18:23:01 +0000 (19:23 +0100)]
MIPS: vmlinux.lds.S: align raw appended dtb to 8 bytes

The devicetree specification requires 8-byte alignment in
memory. This is now enforced by libfdt since commit 79edff12060f
("scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9")
which included the upstream commit 5e735860c478 ("libfdt: Check for
8-byte address alignment in fdt_ro_probe_()").

This broke the MIPS raw appended DTBs which would be appended to
the image immediately following the initramfs section.  This ends
with a 32bit size, resulting in a 4-byte alignment of the DTB.

Fix by padding with zeroes to 8-bytes when MIPS_RAW_APPENDED_DTB
is defined.

Fixes: 79edff12060f ("scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9")
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
3 years agogpiolib: Read "gpio-line-names" from a firmware node
Andy Shevchenko [Fri, 5 Mar 2021 12:02:40 +0000 (14:02 +0200)]
gpiolib: Read "gpio-line-names" from a firmware node

On STM32MP1, the GPIO banks are subnodes of pin-controller@50002000,
see arch/arm/boot/dts/stm32mp151.dtsi. The driver for
pin-controller@50002000 is in drivers/pinctrl/stm32/pinctrl-stm32.c
and iterates over all of its DT subnodes when registering each GPIO
bank gpiochip. Each gpiochip has:

  - gpio_chip.parent = dev,
    where dev is the device node of the pin controller
  - gpio_chip.of_node = np,
    which is the OF node of the GPIO bank

Therefore, dev_fwnode(chip->parent) != of_fwnode_handle(chip.of_node),
i.e. pin-controller@50002000 != pin-controller@50002000/gpio@5000*000.

The original code behaved correctly, as it extracted the "gpio-line-names"
from of_fwnode_handle(chip.of_node) = pin-controller@50002000/gpio@5000*000.

To achieve the same behaviour, read property from the firmware node.

Fixes: 7cba1a4d5e162 ("gpiolib: generalize devprop_gpiochip_set_names() for device properties")
Reported-by: Marek Vasut <marex@denx.de>
Reported-by: Roman Guskov <rguskov@dh-electronics.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
3 years agogpio: pca953x: Set IRQ type when handle Intel Galileo Gen 2
Andy Shevchenko [Thu, 25 Feb 2021 16:33:20 +0000 (18:33 +0200)]
gpio: pca953x: Set IRQ type when handle Intel Galileo Gen 2

The commit 0ea683931adb ("gpio: dwapb: Convert driver to using the
GPIO-lib-based IRQ-chip") indeliberately made a regression on how
IRQ line from GPIO I²C expander is handled. I.e. it reveals that
the quirk for Intel Galileo Gen 2 misses the part of setting IRQ type
which previously was predefined by gpio-dwapb driver. Now, we have to
reorganize the approach to call necessary parts, which can be done via
ACPI_GPIO_QUIRK_ABSOLUTE_NUMBER quirk.

Without this fix and with above mentioned change the kernel hangs
on the first IRQ event with:

    gpio gpiochip3: Persistence not supported for GPIO 1
    irq 32, desc: 62f8fb50, depth: 0, count: 0, unhandled: 0
    ->handle_irq():  41c7b0ab, handle_bad_irq+0x0/0x40
    ->irq_data.chip(): e03f1e72, 0xc2539218
    ->action(): 0ecc7e6f
    ->action->handler(): 8a3db21e, irq_default_primary_handler+0x0/0x10
       IRQ_NOPROBE set
    unexpected IRQ trap at vector 20

Fixes: ba8c90c61847 ("gpio: pca953x: Override IRQ for one of the expanders on Galileo Gen 2")
Depends-on: 0ea683931adb ("gpio: dwapb: Convert driver to using the GPIO-lib-based IRQ-chip")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
3 years agogpiolib: acpi: Allow to find GpioInt() resource by name and index
Andy Shevchenko [Thu, 25 Feb 2021 16:33:19 +0000 (18:33 +0200)]
gpiolib: acpi: Allow to find GpioInt() resource by name and index

Currently only search by index is supported. However, in some cases
we might need to pass the quirks to the acpi_dev_gpio_irq_get().

For this, split out acpi_dev_gpio_irq_get_by() and replace
acpi_dev_gpio_irq_get() by calling above with NULL for name parameter.

Fixes: ba8c90c61847 ("gpio: pca953x: Override IRQ for one of the expanders on Galileo Gen 2")
Depends-on: 0ea683931adb ("gpio: dwapb: Convert driver to using the GPIO-lib-based IRQ-chip")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
3 years agogpiolib: acpi: Add ACPI_GPIO_QUIRK_ABSOLUTE_NUMBER quirk
Andy Shevchenko [Thu, 25 Feb 2021 16:33:18 +0000 (18:33 +0200)]
gpiolib: acpi: Add ACPI_GPIO_QUIRK_ABSOLUTE_NUMBER quirk

On some systems the ACPI tables has wrong pin number and instead of
having a relative one it provides an absolute one in the global GPIO
number space.

Add ACPI_GPIO_QUIRK_ABSOLUTE_NUMBER quirk to cope with such cases.

Fixes: ba8c90c61847 ("gpio: pca953x: Override IRQ for one of the expanders on Galileo Gen 2")
Depends-on: 0ea683931adb ("gpio: dwapb: Convert driver to using the GPIO-lib-based IRQ-chip")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
3 years agogpiolib: acpi: Add missing IRQF_ONESHOT
Yang Li [Tue, 23 Feb 2021 08:35:58 +0000 (16:35 +0800)]
gpiolib: acpi: Add missing IRQF_ONESHOT

fixed the following coccicheck:
./drivers/gpio/gpiolib-acpi.c:176:7-27: ERROR: Threaded IRQ with no
primary handler requested without IRQF_ONESHOT

Make sure threaded IRQs without a primary handler are always request
with IRQF_ONESHOT

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
3 years agogpio: fix gpio-device list corruption
Johan Hovold [Mon, 1 Mar 2021 09:05:19 +0000 (10:05 +0100)]
gpio: fix gpio-device list corruption

Make sure to hold the gpio_lock when removing the gpio device from the
gpio_devices list (when dropping the last reference) to avoid corrupting
the list when there are concurrent accesses.

Fixes: ff2b13592299 ("gpio: make the gpiochip a real device")
Cc: stable@vger.kernel.org # 4.6
Reviewed-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
3 years agogpio: fix NULL-deref-on-deregistration regression
Johan Hovold [Mon, 1 Mar 2021 09:05:18 +0000 (10:05 +0100)]
gpio: fix NULL-deref-on-deregistration regression

Fix a NULL-pointer deference when deregistering the gpio character
device that was introduced by the recent stub-driver hack. When the new
"driver" is unbound as part of deregistration, driver core clears the
driver-data pointer which is used to retrieve the struct gpio_device in
its release callback.

Fix this by using container_of() in the release callback as should have
been done all along.

Fixes: 4731210c09f5 ("gpiolib: Bind gpio_device to a driver to enable fw_devlink=on by default")
Cc: Saravana Kannan <saravanak@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reported-by: syzbot+d27b4c8adbbff70fbfde@syzkaller.appspotmail.com
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
3 years agoselftests: gpio: update .gitignore
Bartosz Golaszewski [Wed, 24 Feb 2021 18:53:16 +0000 (19:53 +0100)]
selftests: gpio: update .gitignore

The executable that we build for GPIO selftests was renamed to
gpio-mockup-cdev. Let's update .gitignore so that we don't show it
as an untracked file.

Fixes: 8bc395a6a2e2 ("selftests: gpio: rework and simplify test implementation")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Kent Gibson <warthog618@gmail.com>
3 years agocrypto: mips/poly1305 - enable for all MIPS processors
Maciej W. Rozycki [Wed, 3 Mar 2021 01:16:04 +0000 (02:16 +0100)]
crypto: mips/poly1305 - enable for all MIPS processors

The MIPS Poly1305 implementation is generic MIPS code written such as to
support down to the original MIPS I and MIPS III ISA for the 32-bit and
64-bit variant respectively.  Lift the current limitation then to enable
code for MIPSr1 ISA or newer processors only and have it available for
all MIPS processors.

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: a11d055e7a64 ("crypto: mips/poly1305 - incorporate OpenSSL/CRYPTOGAMS optimized implementation")
Cc: stable@vger.kernel.org # v5.5+
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
3 years agoMIPS: boot/compressed: Copy DTB to aligned address
Paul Cercueil [Wed, 3 Mar 2021 19:33:05 +0000 (19:33 +0000)]
MIPS: boot/compressed: Copy DTB to aligned address

Since 5.12-rc1, the Device Tree blob must now be properly aligned.

Therefore, the decompress routine must be careful to copy the blob at
the next aligned address after the kernel image.

This commit fixes the kernel sometimes not booting with a Device Tree
blob appended to it.

Fixes: 79edff12060f ("scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
3 years agoMerge tag 'perf-tools-fixes-for-v5.12-2020-03-07' of git://git.kernel.org/pub/scm...
Linus Torvalds [Sun, 7 Mar 2021 21:35:49 +0000 (13:35 -0800)]
Merge tag 'perf-tools-fixes-for-v5.12-2020-03-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:
 "Perf tool fixes:

   - Fix wrong skipping for per-die aggregation in 'perf stat'.

   - Fix race in signal handling on large core count machines, setting
     up signal handlers earlier.

   - Fix -F for branch & mem modes in 'perf report'.

   - Fix the condition checks for max number of NUMA nodes in 'perf
     bench numa'.

   - Fix crash in 'perf diff' error path.

   - Fix filtering of empty build-ids in 'perf archive'.

   - Ensure read cmdlines from libtraceevent are null terminated.

  Recent regressions:

   - Fix control fifo permissions in 'perf daemon'.

   - Fix 'perf daemon' compile error with ASAN.

   - Fix running 'perf daemon' test for non root user.

   - Fix PERF_SAMPLE_WEIGHT_STRUCT 'perf test' failure on non-x86
     arches.

   - Fix event's PMU name parsing related to new drm/i915/gt
     software-gt-awake-time event.

  Fixes from compiler instrumentation:

   - Fix leaks in 'perf test' entries, found using ASAN.

   - Fix use-after-free when 'perf stat -r' option is used.

  Arch specific:

   - Fix bitmap for option om ARM's CS-ETM.

  Documentation:

   - Fix documentation of verbose options.

  Build:

   - Clean 'generated' directory used for creating the syscall table on
     x86.

   - Fix ccache usage in $(CC) when generating arch errno table.

   - Cast (struct timeval).tv_sec when printing, fixing the build with
     MUSL libc.

   - Tighten snprintf() string precision to pass gcc check on some
     32-bit arches.

   - Update UAPI copies from the kernel sources.

   - Fix regression on feature detection 'make clean' target"

* tag 'perf-tools-fixes-for-v5.12-2020-03-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (44 commits)
  perf cs-etm: Fix bitmap for option
  perf trace: Fix race in signal handling
  perf map: Tighten snprintf() string precision to pass gcc check on some 32-bit arches
  perf report: Fix -F for branch & mem modes
  perf tests x86: Move insn.h include to make sure it finds stddef.h
  perf test: Support the ins_lat check in the X86 specific test
  perf test: Fix sample-parsing failure on non-x86 platforms
  perf archive: Fix filtering of empty build-ids
  perf daemon: Fix compile error with Asan
  perf stat: Fix use-after-free when -r option is used
  libperf: Add perf_evlist__reset_id_hash()
  perf stat: Fix wrong skipping for per-die aggregation
  tools headers UAPI: Sync KVM's kvm.h and vmx.h headers with the kernel sources
  tools headers cpufeatures: Sync with the kernel sources
  tools headers UAPI: Update tools' copy of linux/coresight-pmu.h
  tools headers: Update syscall.tbl files to support mount_setattr
  perf test: Fix cpu and thread map leaks in perf_time_to_tsc test
  perf test: Fix cpu map leaks in cpu_map_print test
  perf test: Fix a memory leak in thread_map_remove test
  perf test: Fix a thread map leak in thread_map_synthesize test
  ...

3 years agoMerge branch 'parisc-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller...
Linus Torvalds [Sun, 7 Mar 2021 21:28:31 +0000 (13:28 -0800)]
Merge branch 'parisc-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux

Pull parisc fixes from Helge Deller:
 "Two small parisc architecture fixes: fix a linking failure reported by
  the kernel test robot and remove a duplicate include"

* 'parisc-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  arch/parisc/kernel: remove duplicate include in ptrace
  parisc: Enable -mlong-calls gcc option with CONFIG_COMPILE_TEST

3 years agoMerge tag 'powerpc-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc...
Linus Torvalds [Sun, 7 Mar 2021 21:24:44 +0000 (13:24 -0800)]
Merge tag 'powerpc-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
 "One non-fix, the conversion of vio_driver->remove() to return void,
  which touches various powerpc specific drivers.

  Fix the privilege checks we do in our perf handling, which could cause
  soft/hard lockups in some configurations.

  Fix a bug with IRQ affinity seen on kdump kernels when CPU 0 is
  offline in the second kernel.

  Fix missed page faults after mprotect(..., PROT_NONE) on 603 (32-bit).

  Fix a bug in our VSX (vector) instruction emulation, which should only
  be seen when doing VSX ops to cache inhibited mappings.

  Three commits fixing various build issues with obscure configurations.

  Thanks to Athira Rajeev, Cédric Le Goater, Christophe Leroy, Christoph
  Plattner, Greg Kurz, Jordan Niethe, Laurent Vivier, Ravi Bangoria,
  Tyrel Datwyler, and Uwe Kleine-König"

* tag 'powerpc-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/sstep: Fix VSX instruction emulation
  powerpc/perf: Fix handling of privilege level checks in perf interrupt context
  powerpc: Force inlining of mmu_has_feature to fix build failure
  vio: make remove callback return void
  powerpc/syscall: Force inlining of __prep_irq_for_enabled_exit()
  powerpc/603: Fix protection of user pages mapped with PROT_NONE
  powerpc/pseries: Don't enforce MSI affinity with kdump
  powerpc/4xx: Fix build errors from mfdcr()

3 years agoMerge tag 'm68k-for-v5.12-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sun, 7 Mar 2021 21:20:50 +0000 (13:20 -0800)]
Merge tag 'm68k-for-v5.12-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k

Pull m68k fix from Geert Uytterhoeven:
 "Fix virt_addr_valid() W=1 compiler warnings.

  This is a single non-critical fix. As the build bots are now testing
  all new code with W=1, these warnings are popping up everywhere,
  confusing people. Hence I think it makes sense to silence it as soon
  as possible"

* tag 'm68k-for-v5.12-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Fix virt_addr_valid() W=1 compiler warnings

3 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
David S. Miller [Sun, 7 Mar 2021 01:02:40 +0000 (17:02 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Fix incorrect enum type definition in nfnetlink_cthelper UAPI,
   from Dmitry V. Levin.

2) Remove extra space in deprecated automatic helper assignment
   notice, from Klemen KoÅ¡ir.

3) Drop early socket demux socket after NAT mangling, from
   Florian Westphal. Add a test to exercise this bug.

4) Fix bogus invalid packet report in the conntrack TCP tracker,
   also from Florian.

5) Fix access to xt[NFPROTO_UNSPEC] list with no mutex
   in target/match_revfn(), from Vasily Averin.

6) Disallow updates on the table ownership flag.

7) Fix double hook unregistration of tables with owner.

8) Remove bogus check on the table owner in __nft_release_tables().
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoperf cs-etm: Fix bitmap for option
Suzuki K Poulose [Sat, 6 Feb 2021 15:08:29 +0000 (23:08 +0800)]
perf cs-etm: Fix bitmap for option

When set option with macros ETM_OPT_CTXTID and ETM_OPT_TS, it wrongly
takes these two values (14 and 28 prespectively) as bit masks, but
actually both are the offset for bits.  But this doesn't lead to
further failure due to the AND logic operation will be always true for
ETM_OPT_CTXTID / ETM_OPT_TS.

This patch defines new independent macros (rather than using the
"config" bits) for requesting the "contextid" and "timestamp" for
cs_etm_set_option().

Signed-off-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Cc: Al Grant <al.grant@arm.com>
Cc: Daniel Kiss <daniel.kiss@arm.com>
Cc: Denis Nikitin <denik@chromium.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Link: http://lore.kernel.org/lkml/20210206150833.42120-5-leo.yan@linaro.org
[ Extract the change as a separate patch for easier review ]
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agoperf trace: Fix race in signal handling
Michael Petlan [Tue, 2 Mar 2021 14:41:20 +0000 (15:41 +0100)]
perf trace: Fix race in signal handling

Since a lot of stuff happens before the SIGINT signal handler is registered
(scanning /proc/*, etc.), on bigger systems, such as Cavium Sabre CN99xx,
it may happen that first interrupt signal is lost and perf isn't correctly
terminated.

The reproduction code might look like the following:

    perf trace -a &
    PERF_PID=$!
    sleep 4
    kill -INT $PERF_PID

The issue has been found on a CN99xx machine with RHEL-8 and the patch fixes
it by registering the signal handlers earlier in the init stage.

Suggested-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Tested-by: Michael Petlan <mpetlan@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/lkml/YEJnaMzH2ctp3PPx@kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agoperf map: Tighten snprintf() string precision to pass gcc check on some 32-bit arches
Arnaldo Carvalho de Melo [Fri, 5 Mar 2021 13:02:09 +0000 (10:02 -0300)]
perf map: Tighten snprintf() string precision to pass gcc check on some 32-bit arches

Noticed on a debian:experimental mips and mipsel cross build build
environment:

  perfbuilder@ec265a086e9b:~$ mips-linux-gnu-gcc --version | head -1
  mips-linux-gnu-gcc (Debian 10.2.1-3) 10.2.1 20201224
  perfbuilder@ec265a086e9b:~$

    CC       /tmp/build/perf/util/map.o
  util/map.c: In function 'map__new':
  util/map.c:109:5: error: '%s' directive output may be truncated writing between 1 and 2147483645 bytes into a region of size 4096 [-Werror=format-truncation=]
    109 |    "%s/platforms/%s/arch-%s/usr/lib/%s",
        |     ^~
  In file included from /usr/mips-linux-gnu/include/stdio.h:867,
                   from util/symbol.h:11,
                   from util/map.c:2:
  /usr/mips-linux-gnu/include/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output 32 or more bytes (assuming 4294967321) into a destination of size 4096
     67 |   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
        |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
     68 |        __bos (__s), __fmt, __va_arg_pack ());
        |        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  cc1: all warnings being treated as errors

Since we have the lenghts for what lands in that place, use it to give
the compiler more info and make it happy.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agoperf report: Fix -F for branch & mem modes
Ravi Bangoria [Thu, 4 Mar 2021 06:29:58 +0000 (11:59 +0530)]
perf report: Fix -F for branch & mem modes

perf report fails to add valid additional fields with -F when
used with branch or mem modes. Fix it.

Before patch:

  $ perf record -b
  $ perf report -b -F +srcline_from --stdio
  Error:
  Invalid --fields key: `srcline_from'

After patch:

  $ perf report -b -F +srcline_from --stdio
  # Samples: 8K of event 'cycles'
  # Event count (approx.): 8784
  ...

Committer notes:

There was an inversion: when looking at branch stack dimensions (keys)
it was checking if the sort mode was 'mem', not 'branch'.

Fixes: aa6b3c99236b ("perf report: Make -F more strict like -s")
Reported-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20210304062958.85465-1-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agoperf tests x86: Move insn.h include to make sure it finds stddef.h
Arnaldo Carvalho de Melo [Thu, 4 Mar 2021 12:51:52 +0000 (09:51 -0300)]
perf tests x86: Move insn.h include to make sure it finds stddef.h

In some versions of alpine Linux the perf build is broken since commit
1d509f2a6ebca1ae ("x86/insn: Support big endian cross-compiles"):

  In file included from /usr/include/linux/byteorder/little_endian.h:13,
                   from /usr/include/asm/byteorder.h:5,
                   from arch/x86/util/../../../../arch/x86/include/asm/insn.h:10,
                   from arch/x86/util/archinsn.c:2:
  /usr/include/linux/swab.h:161:8: error: unknown type name '__always_inline'
   static __always_inline __u16 __swab16p(const __u16 *p)

So move the inclusion of arch/x86/include/asm/insn.h to later in the
places where linux/stddef.h (that conditionally defines
__always_inline) to workaround this problem on Alpine Linux 3.9 to 3.11,
3.12 onwards works.

Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agoperf test: Support the ins_lat check in the X86 specific test
Kan Liang [Wed, 3 Mar 2021 16:01:25 +0000 (08:01 -0800)]
perf test: Support the ins_lat check in the X86 specific test

The ins_lat of PERF_SAMPLE_WEIGHT_STRUCT stands for the instruction
latency, which is only available for X86. Add a X86 specific test for
the ins_lat and PERF_SAMPLE_WEIGHT_STRUCT type.

The test__x86_sample_parsing() uses the same way as the
test__sample_parsing() to verify a sample type. Since the ins_lat and
PERF_SAMPLE_WEIGHT_STRUCT are the only X86 specific sample type for now,
the test__x86_sample_parsing() only verify the PERF_SAMPLE_WEIGHT_STRUCT
type. Other sample types are still verified in the generic test.

  $ perf test 77 -v
  77: x86 Sample parsing                                              :
  --- start ---
  test child forked, pid 102370
  test child finished with 0
  ---- end ----
  x86 Sample parsing: Ok

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/1614787285-104151-2-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agoperf test: Fix sample-parsing failure on non-x86 platforms
Kan Liang [Wed, 3 Mar 2021 16:01:24 +0000 (08:01 -0800)]
perf test: Fix sample-parsing failure on non-x86 platforms

Executing 'perf test 27' fails on s390:

  [root@t35lp46 perf]# ./perf test -Fv 27
  27: Sample parsing
  --- start ---
  ---- end ----
  Sample parsing: FAILED!
  [root@t35lp46 perf]#

The commit fbefe9c2f87fd392 ("perf tools: Support arch specific
PERF_SAMPLE_WEIGHT_STRUCT processing") changes the ins_lat to a
model-specific variable only for X86, but perf test still verify the
variable in the generic test.

Remove the ins_lat check in the generic test. The following patch will
add it in the X86 specific test.

Fixes: fbefe9c2f87fd392 ("perf tools: Support arch specific PERF_SAMPLE_WEIGHT_STRUCT processing")
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/1614787285-104151-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agoperf archive: Fix filtering of empty build-ids
Nicholas Fraser [Fri, 19 Feb 2021 16:09:32 +0000 (11:09 -0500)]
perf archive: Fix filtering of empty build-ids

A non-existent build-id used to be treated as all-zero SHA-1 hash.
Build-ids are now variable width. A non-existent build-id is an empty
string and "perf buildid-list" pads this with spaces. This is true even
when using old perf.data files recorded from older versions of perf;
"perf buildid-list" never reports an all-zero hash anymore.

This fixes "perf-archive" to skip missing build-ids by skipping lines
that start with a padding space rather than with zeroes.

Signed-off-by: Nicholas Fraser <nfraser@codeweavers.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Huw Davies <huw@codeweavers.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ulrich Czekalla <uczekalla@codeweavers.com>
Link: https://lore.kernel.org/r/442bffc7-ac5c-0975-b876-a549efce2413@codeweavers.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agoperf daemon: Fix compile error with Asan
Namhyung Kim [Wed, 24 Feb 2021 07:14:38 +0000 (16:14 +0900)]
perf daemon: Fix compile error with Asan

I'm seeing a build failure when build with address sanitizer.  It seems
we could write to the name[100] if the var is longer.

  $ make EXTRA_CFLAGS=-fsanitize=address
  ...
    CC       builtin-daemon.o
  In function â€˜get_session_name’,
    inlined from â€˜session_config’ at builtin-daemon.c:164:6,
    inlined from â€˜server_config’ at builtin-daemon.c:223:10:
  builtin-daemon.c:155:11: error: writing 1 byte into a region of size 0 [-Werror=stringop-overflow=]
    155 |  *session = 0;
        |  ~~~~~~~~~^~~
  builtin-daemon.c: In function â€˜server_config’:
  builtin-daemon.c:162:7: note: at offset 100 to object â€˜name’ with size 100 declared here
    162 |  char name[100];
        |       ^~~~

Fixes: c0666261ff38 ("perf daemon: Add config file support")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210224071438.686677-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agoperf stat: Fix use-after-free when -r option is used
Namhyung Kim [Thu, 25 Feb 2021 03:51:48 +0000 (12:51 +0900)]
perf stat: Fix use-after-free when -r option is used

I got a segfault when using -r option with event groups.  The option
makes it run the workload multiple times and it will reuse the evlist
and evsel for each run.

While most of resources are allocated and freed properly, the id hash
in the evlist was not and it resulted in the bug.  You can see it with
the address sanitizer like below:

  $ perf stat -r 100 -e '{cycles,instructions}' true
  =================================================================
  ==693052==ERROR: AddressSanitizer: heap-use-after-free on
      address 0x6080000003d0 at pc 0x558c57732835 bp 0x7fff1526adb0 sp 0x7fff1526ada8
  WRITE of size 8 at 0x6080000003d0 thread T0
    #0 0x558c57732834 in hlist_add_head /home/namhyung/project/linux/tools/include/linux/list.h:644
    #1 0x558c57732834 in perf_evlist__id_hash /home/namhyung/project/linux/tools/lib/perf/evlist.c:237
    #2 0x558c57732834 in perf_evlist__id_add /home/namhyung/project/linux/tools/lib/perf/evlist.c:244
    #3 0x558c57732834 in perf_evlist__id_add_fd /home/namhyung/project/linux/tools/lib/perf/evlist.c:285
    #4 0x558c5747733e in store_evsel_ids util/evsel.c:2765
    #5 0x558c5747733e in evsel__store_ids util/evsel.c:2782
    #6 0x558c5730b717 in __run_perf_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:895
    #7 0x558c5730b717 in run_perf_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:1014
    #8 0x558c5730b717 in cmd_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:2446
    #9 0x558c57427c24 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
    #10 0x558c572b1a48 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
    #11 0x558c572b1a48 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
    #12 0x558c572b1a48 in main /home/namhyung/project/linux/tools/perf/perf.c:539
    #13 0x7fcadb9f7d09 in __libc_start_main ../csu/libc-start.c:308
    #14 0x558c572b60f9 in _start (/home/namhyung/project/linux/tools/perf/perf+0x45d0f9)

Actually the nodes in the hash table are struct perf_stream_id and
they were freed in the previous run.  Fix it by resetting the hash.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210225035148.778569-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agolibperf: Add perf_evlist__reset_id_hash()
Namhyung Kim [Thu, 25 Feb 2021 03:51:47 +0000 (12:51 +0900)]
libperf: Add perf_evlist__reset_id_hash()

Add the perf_evlist__reset_id_hash() function as an internal function so
that it can be called by perf to reset the hash table.  This is
necessary for 'perf stat' to run the workload multiple times.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210225035148.778569-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agoperf stat: Fix wrong skipping for per-die aggregation
Jin Yao [Thu, 28 Jan 2021 01:34:17 +0000 (09:34 +0800)]
perf stat: Fix wrong skipping for per-die aggregation

Uncore becomes die-scope on Xeon Cascade Lake-AP and perf has supported
--per-die aggregation yet.

One issue is found in check_per_pkg() for uncore events running on AP
system. On cascade Lake-AP, we have:

S0-D0
S0-D1
S1-D0
S1-D1

But in check_per_pkg(), S0-D1 and S1-D1 are skipped because the mask
bits for S0 and S1 have been set for S0-D0 and S1-D0. It doesn't check
die_id. So the counting for S0-D1 and S1-D1 are set to zero.  That's not
correct.

  root@lkp-csl-2ap4 ~# ./perf stat -a -I 1000 -e llc_misses.mem_read --per-die -- sleep 5
     1.001460963 S0-D0           1            1317376 Bytes llc_misses.mem_read
     1.001460963 S0-D1           1             998016 Bytes llc_misses.mem_read
     1.001460963 S1-D0           1             970496 Bytes llc_misses.mem_read
     1.001460963 S1-D1           1            1291264 Bytes llc_misses.mem_read
     2.003488021 S0-D0           1            1082048 Bytes llc_misses.mem_read
     2.003488021 S0-D1           1            1919040 Bytes llc_misses.mem_read
     2.003488021 S1-D0           1             890752 Bytes llc_misses.mem_read
     2.003488021 S1-D1           1            2380800 Bytes llc_misses.mem_read
     3.005613270 S0-D0           1            1126080 Bytes llc_misses.mem_read
     3.005613270 S0-D1           1            2898176 Bytes llc_misses.mem_read
     3.005613270 S1-D0           1             870912 Bytes llc_misses.mem_read
     3.005613270 S1-D1           1            3388608 Bytes llc_misses.mem_read
     4.007627598 S0-D0           1            1124608 Bytes llc_misses.mem_read
     4.007627598 S0-D1           1            3884416 Bytes llc_misses.mem_read
     4.007627598 S1-D0           1             921088 Bytes llc_misses.mem_read
     4.007627598 S1-D1           1            4451840 Bytes llc_misses.mem_read
     5.001479927 S0-D0           1             963328 Bytes llc_misses.mem_read
     5.001479927 S0-D1           1            4831936 Bytes llc_misses.mem_read
     5.001479927 S1-D0           1             895104 Bytes llc_misses.mem_read
     5.001479927 S1-D1           1            5496640 Bytes llc_misses.mem_read

From above output, we can see S0-D1 and S1-D1 don't report the interval
values, they are continued to grow. That's because check_per_pkg()
wrongly decides to use zero counts for S0-D1 and S1-D1.

So in check_per_pkg(), we should use hashmap(socket,die) to decide if
the cpu counts needs to skip. Only considering socket is not enough.

Now with this patch,

  root@lkp-csl-2ap4 ~# ./perf stat -a -I 1000 -e llc_misses.mem_read --per-die -- sleep 5
     1.001586691 S0-D0           1            1229440 Bytes llc_misses.mem_read
     1.001586691 S0-D1           1             976832 Bytes llc_misses.mem_read
     1.001586691 S1-D0           1             938304 Bytes llc_misses.mem_read
     1.001586691 S1-D1           1            1227328 Bytes llc_misses.mem_read
     2.003776312 S0-D0           1            1586752 Bytes llc_misses.mem_read
     2.003776312 S0-D1           1             875392 Bytes llc_misses.mem_read
     2.003776312 S1-D0           1             855616 Bytes llc_misses.mem_read
     2.003776312 S1-D1           1             949376 Bytes llc_misses.mem_read
     3.006512788 S0-D0           1            1338880 Bytes llc_misses.mem_read
     3.006512788 S0-D1           1             920064 Bytes llc_misses.mem_read
     3.006512788 S1-D0           1             877184 Bytes llc_misses.mem_read
     3.006512788 S1-D1           1            1020736 Bytes llc_misses.mem_read
     4.008895291 S0-D0           1             926592 Bytes llc_misses.mem_read
     4.008895291 S0-D1           1             906368 Bytes llc_misses.mem_read
     4.008895291 S1-D0           1             892224 Bytes llc_misses.mem_read
     4.008895291 S1-D1           1             987712 Bytes llc_misses.mem_read
     5.001590993 S0-D0           1             962624 Bytes llc_misses.mem_read
     5.001590993 S0-D1           1             912512 Bytes llc_misses.mem_read
     5.001590993 S1-D0           1             891200 Bytes llc_misses.mem_read
     5.001590993 S1-D1           1             978432 Bytes llc_misses.mem_read

On no-die system, die_id is 0, actually it's hashmap(socket,0), original behavior
is not changed.

Reported-by: Ying Huang <ying.huang@intel.com>
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ying Huang <ying.huang@intel.com>
Link: http://lore.kernel.org/lkml/20210128013417.25597-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agotools headers UAPI: Sync KVM's kvm.h and vmx.h headers with the kernel sources
Arnaldo Carvalho de Melo [Tue, 2 Mar 2021 20:20:08 +0000 (17:20 -0300)]
tools headers UAPI: Sync KVM's kvm.h and vmx.h headers with the kernel sources

To pick the changes in:

  fe6b6bc802b40081 ("KVM: VMX: Enable bus lock VM exit")

That makes 'perf kvm-stat' aware of this new BUS_LOCK exit reason, thus
addressing the following perf build warning:

  Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/vmx.h' differs from latest version at 'arch/x86/include/uapi/asm/vmx.h'
  diff -u tools/arch/x86/include/uapi/asm/vmx.h arch/x86/include/uapi/asm/vmx.h

Cc: Chenyi Qiang <chenyi.qiang@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agotools headers cpufeatures: Sync with the kernel sources
Arnaldo Carvalho de Melo [Tue, 2 Mar 2021 20:16:17 +0000 (17:16 -0300)]
tools headers cpufeatures: Sync with the kernel sources

To pick the changes from:

  3b9c723ed7cfa4e1 ("KVM: SVM: Add support for SVM instruction address check change")
  b85a0425d8056f3b ("Enumerate AVX Vector Neural Network instructions")
  fb35d30fe5b06cc2 ("x86/cpufeatures: Assign dedicated feature word for CPUID_0x8000001F[EAX]")

This only causes these perf files to be rebuilt:

  CC       /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
  CC       /tmp/build/perf/bench/mem-memset-x86-64-asm.o

And addresses this perf build warning:

  Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
  diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h

Cc: Borislav Petkov <bp@suse.de>
Cc: Kyung Min Park <kyung.min.park@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Wei Huang <wei.huang2@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agotools headers UAPI: Update tools' copy of linux/coresight-pmu.h
Arnaldo Carvalho de Melo [Tue, 2 Mar 2021 20:10:52 +0000 (17:10 -0300)]
tools headers UAPI: Update tools' copy of linux/coresight-pmu.h

To get the changes in these commits:

  88f11864cf1d1324 ("coresight: etm-perf: Support PID tracing for kernel at EL2")
  53abf3fe83175626 ("coresight: etm-perf: Clarify comment on perf options")

This will possibly be used in patches lined up for v5.13.

And silence this perf build warning:

  Warning: Kernel ABI header at 'tools/include/linux/coresight-pmu.h' differs from latest version at 'include/linux/coresight-pmu.h'
  diff -u tools/include/linux/coresight-pmu.h include/linux/coresight-pmu.h

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agotools headers: Update syscall.tbl files to support mount_setattr
Arnaldo Carvalho de Melo [Tue, 2 Mar 2021 19:44:14 +0000 (16:44 -0300)]
tools headers: Update syscall.tbl files to support mount_setattr

To pick the changes from:

  9caccd41541a6f7d ("fs: introduce MOUNT_ATTR_IDMAP")

This adds this new syscall to the tables used by tools such as 'perf
trace', so that one can specify it by name and have it filtered, etc.

Addressing these perf build warnings:

  Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
  diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
  Warning: Kernel ABI header at 'tools/perf/arch/powerpc/entry/syscalls/syscall.tbl' differs from latest version at 'arch/powerpc/kernel/syscalls/syscall.tbl'
  diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl
  Warning: Kernel ABI header at 'tools/perf/arch/s390/entry/syscalls/syscall.tbl' differs from latest version at 'arch/s390/kernel/syscalls/syscall.tbl'
  diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/YD6Wsxr9ByUbab/a@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agoperf test: Fix cpu and thread map leaks in perf_time_to_tsc test
Namhyung Kim [Mon, 1 Mar 2021 14:04:09 +0000 (23:04 +0900)]
perf test: Fix cpu and thread map leaks in perf_time_to_tsc test

It should release the maps at the end.

  $ perf test -v 71
  71: Convert perf time to TSC                   :
  --- start ---
  test child forked, pid 178744
  mmap size 528384B
  1st event perf time 59207256505278 tsc 13187166645142
  rdtsc          time 59207256542151 tsc 13187166723020
  2nd event perf time 59207256543749 tsc 13187166726393

  =================================================================
  ==178744==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 40 byte(s) in 1 object(s) allocated from:
    #0 0x7faf601f9e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
    #1 0x55b620cfc00a in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79
    #2 0x55b620cfca2f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149
    #3 0x55b620cfd1ef in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166
    #4 0x55b620cfd1ef in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181
    #5 0x55b6209ef1b2 in test__perf_time_to_tsc tests/perf-time-to-tsc.c:73
    #6 0x55b6209828fb in run_test tests/builtin-test.c:428
    #7 0x55b6209828fb in test_and_print tests/builtin-test.c:458
    #8 0x55b620984a53 in __cmd_test tests/builtin-test.c:679
    #9 0x55b620984a53 in cmd_test tests/builtin-test.c:825
    #10 0x55b6209f0cd4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
    #11 0x55b62087aa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
    #12 0x55b62087aa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
    #13 0x55b62087aa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
    #14 0x7faf5fd2fd09 in __libc_start_main ../csu/libc-start.c:308

  SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s).
  test child finished with 1
  ---- end ----
  Convert perf time to TSC: FAILED!

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-12-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agoperf test: Fix cpu map leaks in cpu_map_print test
Namhyung Kim [Mon, 1 Mar 2021 14:04:08 +0000 (23:04 +0900)]
perf test: Fix cpu map leaks in cpu_map_print test

It should be released after printing the map.

  $ perf test -v 52
  52: Print cpu map                              :
  --- start ---
  test child forked, pid 172233

  =================================================================
  ==172233==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 156 byte(s) in 1 object(s) allocated from:
    #0 0x7fc472518e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
    #1 0x55e63b378f7a in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79
    #2 0x55e63b37a05c in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:237
    #3 0x55e63b056d16 in cpu_map_print tests/cpumap.c:102
    #4 0x55e63b056d16 in test__cpu_map_print tests/cpumap.c:120
    #5 0x55e63afff8fb in run_test tests/builtin-test.c:428
    #6 0x55e63afff8fb in test_and_print tests/builtin-test.c:458
    #7 0x55e63b001a53 in __cmd_test tests/builtin-test.c:679
    #8 0x55e63b001a53 in cmd_test tests/builtin-test.c:825
    #9 0x55e63b06dc44 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
    #10 0x55e63aef7a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
    #11 0x55e63aef7a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
    #12 0x55e63aef7a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
    #13 0x7fc47204ed09 in __libc_start_main ../csu/libc-start.c:308
  ...

  SUMMARY: AddressSanitizer: 448 byte(s) leaked in 7 allocation(s).
  test child finished with 1
  ---- end ----
  Print cpu map: FAILED!

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-11-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agoperf test: Fix a memory leak in thread_map_remove test
Namhyung Kim [Mon, 1 Mar 2021 14:04:07 +0000 (23:04 +0900)]
perf test: Fix a memory leak in thread_map_remove test

The str should be freed after creating a thread map.  Also change the
open-coded thread map deletion to a call to perf_thread_map__put().

  $ perf test -v 44
  44: Remove thread map                          :
  --- start ---
  test child forked, pid 165536
  2 threads: 165535, 165536
  1 thread: 165536
  0 thread:

  =================================================================
  ==165536==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 14 byte(s) in 1 object(s) allocated from:
    #0 0x7f54453ffe8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
    #1 0x7f5444f8c6a7 in __vasprintf_internal libio/vasprintf.c:71

  SUMMARY: AddressSanitizer: 14 byte(s) leaked in 1 allocation(s).
  test child finished with 1
  ---- end ----
  Remove thread map: FAILED!

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-10-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agoperf test: Fix a thread map leak in thread_map_synthesize test
Namhyung Kim [Mon, 1 Mar 2021 14:04:06 +0000 (23:04 +0900)]
perf test: Fix a thread map leak in thread_map_synthesize test

It missed to call perf_thread_map__put() after using the map.

  $ perf test -v 43
  43: Synthesize thread map                      :
  --- start ---
  test child forked, pid 162640

  =================================================================
  ==162640==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 32 byte(s) in 1 object(s) allocated from:
    #0 0x7fd48cdaa1f8 in __interceptor_realloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:164
    #1 0x563e6d5f8d0e in perf_thread_map__realloc /home/namhyung/project/linux/tools/lib/perf/threadmap.c:23
    #2 0x563e6d3ef69a in thread_map__new_by_pid util/thread_map.c:46
    #3 0x563e6d2cec90 in test__thread_map_synthesize tests/thread-map.c:97
    #4 0x563e6d27d8fb in run_test tests/builtin-test.c:428
    #5 0x563e6d27d8fb in test_and_print tests/builtin-test.c:458
    #6 0x563e6d27fa53 in __cmd_test tests/builtin-test.c:679
    #7 0x563e6d27fa53 in cmd_test tests/builtin-test.c:825
    #8 0x563e6d2ebce4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
    #9 0x563e6d175a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
    #10 0x563e6d175a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
    #11 0x563e6d175a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
    #12 0x7fd48c8dfd09 in __libc_start_main ../csu/libc-start.c:308

  SUMMARY: AddressSanitizer: 8224 byte(s) leaked in 2 allocation(s).
  test child finished with 1
  ---- end ----
  Synthesize thread map: FAILED!

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-9-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agoperf test: Fix cpu and thread map leaks in switch_tracking test
Namhyung Kim [Mon, 1 Mar 2021 14:04:05 +0000 (23:04 +0900)]
perf test: Fix cpu and thread map leaks in switch_tracking test

The evlist and cpu/thread maps should be released together.
Otherwise the following error was reported by Asan.

  $ perf test -v 35
  35: Track with sched_switch                    :
  --- start ---
  test child forked, pid 159287
  Using CPUID GenuineIntel-6-8E-C
  mmap size 528384B
  1295 events recorded

  =================================================================
  ==159287==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 40 byte(s) in 1 object(s) allocated from:
    #0 0x7fa28d9a2e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
    #1 0x5652f5a5affa in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79
    #2 0x5652f5a5ba1f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149
    #3 0x5652f5a5c1df in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166
    #4 0x5652f5a5c1df in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181
    #5 0x5652f5723bbf in test__switch_tracking tests/switch-tracking.c:350
    #6 0x5652f56e18fb in run_test tests/builtin-test.c:428
    #7 0x5652f56e18fb in test_and_print tests/builtin-test.c:458
    #8 0x5652f56e3a53 in __cmd_test tests/builtin-test.c:679
    #9 0x5652f56e3a53 in cmd_test tests/builtin-test.c:825
    #10 0x5652f574fcc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
    #11 0x5652f55d9a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
    #12 0x5652f55d9a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
    #13 0x5652f55d9a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
    #14 0x7fa28d4d8d09 in __libc_start_main ../csu/libc-start.c:308

  SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s).
  test child finished with 1
  ---- end ----
  Track with sched_switch: FAILED!

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-8-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agoperf test: Fix cpu and thread map leaks in keep_tracking test
Namhyung Kim [Mon, 1 Mar 2021 14:04:04 +0000 (23:04 +0900)]
perf test: Fix cpu and thread map leaks in keep_tracking test

The evlist and the cpu/thread maps should be released together.
Otherwise following error was reported by Asan.

  $ perf test -v 28
  28: Use a dummy software event to keep tracking:
  --- start ---
  test child forked, pid 156810
  mmap size 528384B

  =================================================================
  ==156810==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 40 byte(s) in 1 object(s) allocated from:
    #0 0x7f637d2bce8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
    #1 0x55cc6295cffa in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79
    #2 0x55cc6295da1f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149
    #3 0x55cc6295e1df in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166
    #4 0x55cc6295e1df in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181
    #5 0x55cc626287cf in test__keep_tracking tests/keep-tracking.c:84
    #6 0x55cc625e38fb in run_test tests/builtin-test.c:428
    #7 0x55cc625e38fb in test_and_print tests/builtin-test.c:458
    #8 0x55cc625e5a53 in __cmd_test tests/builtin-test.c:679
    #9 0x55cc625e5a53 in cmd_test tests/builtin-test.c:825
    #10 0x55cc62651cc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
    #11 0x55cc624dba88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
    #12 0x55cc624dba88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
    #13 0x55cc624dba88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
    #14 0x7f637cdf2d09 in __libc_start_main ../csu/libc-start.c:308

  SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s).
  test child finished with 1
  ---- end ----
  Use a dummy software event to keep tracking: FAILED!

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-7-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agoperf test: Fix cpu and thread map leaks in code_reading test
Namhyung Kim [Mon, 1 Mar 2021 14:04:03 +0000 (23:04 +0900)]
perf test: Fix cpu and thread map leaks in code_reading test

The evlist and the cpu/thread maps should be released together.
Otherwise following error was reported by Asan.

Note that this test still has memory leaks in DSOs so it still fails
even after this change.  I'll take a look at that too.

  # perf test -v 26
  26: Object code reading                        :
  --- start ---
  test child forked, pid 154184
  Looking at the vmlinux_path (8 entries long)
  symsrc__init: build id mismatch for vmlinux.
  symsrc__init: cannot get elf header.
  Using /proc/kcore for kernel data
  Using /proc/kallsyms for symbols
  Parsing event 'cycles'
  mmap size 528384B
  ...
  =================================================================
  ==154184==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 439 byte(s) in 1 object(s) allocated from:
    #0 0x7fcb66e77037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
    #1 0x55ad9b7e821e in dso__new_id util/dso.c:1256
    #2 0x55ad9b8cfd4a in __machine__addnew_vdso util/vdso.c:132
    #3 0x55ad9b8cfd4a in machine__findnew_vdso util/vdso.c:347
    #4 0x55ad9b845b7e in map__new util/map.c:176
    #5 0x55ad9b8415a2 in machine__process_mmap2_event util/machine.c:1787
    #6 0x55ad9b8fab16 in perf_tool__process_synth_event util/synthetic-events.c:64
    #7 0x55ad9b8fab16 in perf_event__synthesize_mmap_events util/synthetic-events.c:499
    #8 0x55ad9b8fbfdf in __event__synthesize_thread util/synthetic-events.c:741
    #9 0x55ad9b8ff3e3 in perf_event__synthesize_thread_map util/synthetic-events.c:833
    #10 0x55ad9b738585 in do_test_code_reading tests/code-reading.c:608
    #11 0x55ad9b73b25d in test__code_reading tests/code-reading.c:722
    #12 0x55ad9b6f28fb in run_test tests/builtin-test.c:428
    #13 0x55ad9b6f28fb in test_and_print tests/builtin-test.c:458
    #14 0x55ad9b6f4a53 in __cmd_test tests/builtin-test.c:679
    #15 0x55ad9b6f4a53 in cmd_test tests/builtin-test.c:825
    #16 0x55ad9b760cc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
    #17 0x55ad9b5eaa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
    #18 0x55ad9b5eaa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
    #19 0x55ad9b5eaa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
    #20 0x7fcb669acd09 in __libc_start_main ../csu/libc-start.c:308

    ...
  SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s).
  test child finished with 1
  ---- end ----
  Object code reading: FAILED!

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agoperf test: Fix cpu and thread map leaks in sw_clock_freq test
Namhyung Kim [Mon, 1 Mar 2021 14:04:02 +0000 (23:04 +0900)]
perf test: Fix cpu and thread map leaks in sw_clock_freq test

The evlist has the maps with its own refcounts so we don't need to set
the pointers to NULL.  Otherwise following error was reported by Asan.

Also change the goto label since it doesn't need to have two.

  # perf test -v 25
  25: Software clock events period values        :
  --- start ---
  test child forked, pid 149154
  mmap size 528384B
  mmap size 528384B

  =================================================================
  ==149154==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 32 byte(s) in 1 object(s) allocated from:
    #0 0x7fef5cd071f8 in __interceptor_realloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:164
    #1 0x56260d5e8b8e in perf_thread_map__realloc /home/namhyung/project/linux/tools/lib/perf/threadmap.c:23
    #2 0x56260d3df7a9 in thread_map__new_by_tid util/thread_map.c:63
    #3 0x56260d2ac6b2 in __test__sw_clock_freq tests/sw-clock.c:65
    #4 0x56260d26d8fb in run_test tests/builtin-test.c:428
    #5 0x56260d26d8fb in test_and_print tests/builtin-test.c:458
    #6 0x56260d26fa53 in __cmd_test tests/builtin-test.c:679
    #7 0x56260d26fa53 in cmd_test tests/builtin-test.c:825
    #8 0x56260d2dbb64 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
    #9 0x56260d165a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
    #10 0x56260d165a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
    #11 0x56260d165a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
    #12 0x7fef5c83cd09 in __libc_start_main ../csu/libc-start.c:308

    ...
  test child finished with 1
  ---- end ----
  Software clock events period values      : FAILED!

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agoperf test: Fix cpu and thread map leaks in task_exit test
Namhyung Kim [Mon, 1 Mar 2021 14:04:01 +0000 (23:04 +0900)]
perf test: Fix cpu and thread map leaks in task_exit test

The evlist has the maps with its own refcounts so we don't need to set
the pointers to NULL.  Otherwise following error was reported by Asan.

Also change the goto label since it doesn't need to have two.

  # perf test -v 24
  24: Number of exit events of a simple workload :
  --- start ---
  test child forked, pid 145915
  mmap size 528384B

  =================================================================
  ==145915==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 32 byte(s) in 1 object(s) allocated from:
    #0 0x7fc44e50d1f8 in __interceptor_realloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:164
    #1 0x561cf50f4d2e in perf_thread_map__realloc /home/namhyung/project/linux/tools/lib/perf/threadmap.c:23
    #2 0x561cf4eeb949 in thread_map__new_by_tid util/thread_map.c:63
    #3 0x561cf4db7fd2 in test__task_exit tests/task-exit.c:74
    #4 0x561cf4d798fb in run_test tests/builtin-test.c:428
    #5 0x561cf4d798fb in test_and_print tests/builtin-test.c:458
    #6 0x561cf4d7ba53 in __cmd_test tests/builtin-test.c:679
    #7 0x561cf4d7ba53 in cmd_test tests/builtin-test.c:825
    #8 0x561cf4de7d04 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
    #9 0x561cf4c71a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
    #10 0x561cf4c71a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
    #11 0x561cf4c71a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
    #12 0x7fc44e042d09 in __libc_start_main ../csu/libc-start.c:308

    ...
  test child finished with 1
  ---- end ----
  Number of exit events of a simple workload: FAILED!

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agoperf test: Fix a memory leak in attr test
Namhyung Kim [Mon, 1 Mar 2021 14:04:00 +0000 (23:04 +0900)]
perf test: Fix a memory leak in attr test

The get_argv_exec_path() returns a dynamic memory so it should be
freed after use.

  $ perf test -v 17
  ...
  ==141682==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 33 byte(s) in 1 object(s) allocated from:
    #0 0x7f09107d2e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
    #1 0x7f091035f6a7 in __vasprintf_internal libio/vasprintf.c:71

  SUMMARY: AddressSanitizer: 33 byte(s) leaked in 1 allocation(s).

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agoperf test: Fix cpu and thread map leaks in basic mmap test
Namhyung Kim [Mon, 1 Mar 2021 14:03:59 +0000 (23:03 +0900)]
perf test: Fix cpu and thread map leaks in basic mmap test

The evlist has the maps with its own refcounts so we don't need to set
the pointers to NULL.  Otherwise following error was reported by Asan.

  # perf test -v 4
   4: Read samples using the mmap interface      :
  --- start ---
  test child forked, pid 139782
  mmap size 528384B

  =================================================================
  ==139782==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 40 byte(s) in 1 object(s) allocated from:
    #0 0x7f1f76daee8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
    #1 0x564ba21a0fea in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79
    #2 0x564ba21a1a0f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149
    #3 0x564ba21a21cf in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166
    #4 0x564ba21a21cf in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181
    #5 0x564ba1e48298 in test__basic_mmap tests/mmap-basic.c:55
    #6 0x564ba1e278fb in run_test tests/builtin-test.c:428
    #7 0x564ba1e278fb in test_and_print tests/builtin-test.c:458
    #8 0x564ba1e29a53 in __cmd_test tests/builtin-test.c:679
    #9 0x564ba1e29a53 in cmd_test tests/builtin-test.c:825
    #10 0x564ba1e95cb4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
    #11 0x564ba1d1fa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
    #12 0x564ba1d1fa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
    #13 0x564ba1d1fa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
    #14 0x7f1f768e4d09 in __libc_start_main ../csu/libc-start.c:308

    ...
  test child finished with 1
  ---- end ----
  Read samples using the mmap interface: FAILED!
  failed to open shell test directory: /home/namhyung/libexec/perf-core/tests/shell

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20210301140409.184570-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agoperf tools: Fix event's PMU name parsing
Jiri Olsa [Mon, 1 Mar 2021 12:23:15 +0000 (13:23 +0100)]
perf tools: Fix event's PMU name parsing

Jin Yao reported parser error for software event:

  # perf stat -e software/r1a/ -a -- sleep 1
  event syntax error: 'software/r1a/'
                       \___ parser error

This happens after commit 8c3b1ba0e7ea9a80 ("drm/i915/gt: Track the
overall awake/busy time"), where new software-gt-awake-time event's
non-pmu-event-style makes event parser conflict with software PMU.

If we allow PE_PMU_EVENT_PRE to be parsed as PMU name, we fix the
conflict and the following character '/' for PMU or '-' for
non-pmu-event-style event allows parser to decide what even is
specified.

Fixes: 8c3b1ba0e7ea9a80 ("drm/i915/gt: Track the overall awake/busy time")
Reported-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210301122315.63471-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agoperf daemon: Fix running test for non root user
Jiri Olsa [Mon, 1 Mar 2021 12:25:10 +0000 (13:25 +0100)]
perf daemon: Fix running test for non root user

John reported that the daemon test is not working for non root user.
Changing the tests configurations so it's allowed to run under normal
user.

Fixes: 2291bb915b55 ("perf tests: Add daemon 'list' command test")
Reported-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210301122510.64402-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agoperf daemon: Fix control fifo permissions
Jiri Olsa [Mon, 1 Mar 2021 12:25:09 +0000 (13:25 +0100)]
perf daemon: Fix control fifo permissions

Add proper mode for mkfifo calls to get read and write permissions for
user. We can't use O_RDWR in here, changing to standard permission
value.

Fixes: 6a6d1804a190 ("perf daemon: Set control fifo for session")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210301122510.64402-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agoperf build: Fix ccache usage in $(CC) when generating arch errno table
Antonio Terceiro [Wed, 24 Feb 2021 13:00:46 +0000 (10:00 -0300)]
perf build: Fix ccache usage in $(CC) when generating arch errno table

This was introduced by commit e4ffd066ff440a57 ("perf: Normalize gcc
parameter when generating arch errno table").

Assuming the first word of $(CC) is the actual compiler breaks usage
like CC="ccache gcc": the script ends up calling ccache directly with
gcc arguments, what fails. Instead of getting the first word, just
remove from $(CC) any word that starts with a "-". This maintains the
spirit of the original patch, while not breaking ccache users.

Fixes: e4ffd066ff440a57 ("perf: Normalize gcc parameter when generating arch errno table")
Signed-off-by: Antonio Terceiro <antonio.terceiro@linaro.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: He Zhe <zhe.he@windriver.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20210224130046.346977-1-antonio.terceiro@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agoperf tools: Fix documentation of verbose options
Ian Rogers [Fri, 26 Feb 2021 18:31:44 +0000 (10:31 -0800)]
perf tools: Fix documentation of verbose options

Option doesn't take a value, make sure the man pages agree. For example:

  $ perf evlist --verbose=1
   Error: option `verbose' takes no value

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210226183145.1878782-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agoperf traceevent: Ensure read cmdlines are null terminated.
Ian Rogers [Fri, 26 Feb 2021 22:14:31 +0000 (14:14 -0800)]
perf traceevent: Ensure read cmdlines are null terminated.

Issue detected by address sanitizer.

Fixes: cd4ceb63438e9e28 ("perf util: Save pid-cmdline mapping into tracing header")
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210226221431.1985458-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agoperf bench numa: Fix the condition checks for max number of NUMA nodes
Athira Rajeev [Thu, 25 Feb 2021 16:50:02 +0000 (11:50 -0500)]
perf bench numa: Fix the condition checks for max number of NUMA nodes

In systems having higher node numbers available like node
255, perf numa bench will fail with SIGABORT.

  <<>>
  perf: bench/numa.c:1416: init: Assertion `!(g->p.nr_nodes > 64 || g->p.nr_nodes < 0)' failed.
  Aborted (core dumped)
  <<>>

Snippet from 'numactl -H' below on a powerpc system where the highest
node number available is 255:

  available: 6 nodes (0,8,252-255)
  node 0 cpus: <cpu-list>
  node 0 size: 519587 MB
  node 0 free: 516659 MB
  node 8 cpus: <cpu-list>
  node 8 size: 523607 MB
  node 8 free: 486757 MB
  node 252 cpus:
  node 252 size: 0 MB
  node 252 free: 0 MB
  node 253 cpus:
  node 253 size: 0 MB
  node 253 free: 0 MB
  node 254 cpus:
  node 254 size: 0 MB
  node 254 free: 0 MB
  node 255 cpus:
  node 255 size: 0 MB
  node 255 free: 0 MB
  node distances:
  node   0   8  252  253  254  255

Note: <cpu-list> expands to actual cpu list in the original output.
These nodes 252-255 are to represent the memory on GPUs and are valid
nodes.

The perf numa bench init code has a condition check to see if the number
of NUMA nodes (nr_nodes) exceeds MAX_NR_NODES. The value of MAX_NR_NODES
defined in perf code is 64. And the 'nr_nodes' is the value from
numa_max_node() which represents the highest node number available in the
system. In some systems where we could have NUMA node 255, this condition
check fails and results in SIGABORT.

The numa benchmark uses static value of MAX_NR_NODES in the code to
represent size of two NUMA node arrays and node bitmask used for setting
memory policy. Patch adds a fix to dynamically allocate size for the
two arrays and bitmask value based on the node numbers available in the
system. With the fix, perf numa benchmark will work with node configuration
on any system and thus removes the static MAX_NR_NODES value.

Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/lkml/1614271802-1503-1-git-send-email-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agoperf diff: Don't crash on freeing errno-session on the error path
Dmitry Safonov [Tue, 2 Mar 2021 02:35:33 +0000 (02:35 +0000)]
perf diff: Don't crash on freeing errno-session on the error path

__cmd_diff() sets result of perf_session__new() to d->session.

In case of failure, it's errno and perf-diff may crash with:

  failed to open perf.data: Permission denied
  Failed to open perf.data
  Segmentation fault (core dumped)

From the coredump:

0  0x00005569a62b5955 in auxtrace__free (session=0xffffffffffffffff)
    at util/auxtrace.c:2681
1  0x00005569a626b37d in perf_session__delete (session=0xffffffffffffffff)
    at util/session.c:295
2  perf_session__delete (session=0xffffffffffffffff) at util/session.c:291
3  0x00005569a618008a in __cmd_diff () at builtin-diff.c:1239
4  cmd_diff (argc=<optimized out>, argv=<optimized out>) at builtin-diff.c:2011
[..]

Funny enough, it won't always crash. For me it crashes only if failed
file is second in cmd-line: the reason is that cmd_diff() check files for
branch-stacks [in check_file_brstack()] and if the first file doesn't
have brstacks, it doesn't proceed to try open other files from cmd-line.

Check d->session before calling perf_session__delete().

Another solution would be assigning to temporary variable, checking it,
but I find it easier to follow with IS_ERR() check in the same function.
After some time it's still obvious why the check is needed, and with
temp variable it's possible to make the same mistake.

Committer testing:

  $ perf record sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.001 MB perf.data (8 samples) ]
  $ perf diff
  failed to open perf.data.old: No such file or directory
  Failed to open perf.data.old
  $ perf record sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.001 MB perf.data (8 samples) ]
  $ perf diff
  # Event 'cycles:u'
  #
  # Baseline  Delta Abs  Shared Object     Symbol
  # ........  .........  ................  ..........................
  #
       0.92%    +87.66%  [unknown]         [k] 0xffffffff8825de16
      11.39%     +0.04%  ld-2.32.so        [.] __GI___tunables_init
      87.70%             ld-2.32.so        [.] _dl_check_map_versions
  $ sudo chown root:root perf.data
  [sudo] password for acme:
  $ perf diff
  failed to open perf.data: Permission denied
  Failed to open perf.data
  Segmentation fault (core dumped)
  $

After the patch:

  $ perf diff
  failed to open perf.data: Permission denied
  Failed to open perf.data
  $

Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: dmitry safonov <dima@arista.com>
Link: http://lore.kernel.org/lkml/20210302023533.1572231-1-dima@arista.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agoperf tools: Clean 'generated' directory used for creating the syscall table on x86
Andreas Wendleder [Mon, 1 Mar 2021 18:56:42 +0000 (19:56 +0100)]
perf tools: Clean 'generated' directory used for creating the syscall table on x86

Remove generated directory tools/perf/arch/x86/include/generated.

Signed-off-by: Andreas Wendleder <andreas.wendleder@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210301185642.163396-1-gonsolo@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agoperf build: Move feature cleanup under tools/build
Jiri Olsa [Wed, 24 Feb 2021 15:08:31 +0000 (16:08 +0100)]
perf build: Move feature cleanup under tools/build

Arnaldo reported issue for following build command:

  $ rm -rf /tmp/krava; mkdir /tmp/krava; make O=/tmp/krava clean
    CLEAN    config
  /bin/sh: line 0: cd: /tmp/krava/feature/: No such file or directory
  ../../scripts/Makefile.include:17: *** output directory "/tmp/krava/feature/" does not exist.  Stop.
  make[1]: *** [Makefile.perf:1010: config-clean] Error 2
  make: *** [Makefile:90: clean] Error 2

The problem is that now that we include scripts/Makefile.include
in feature's Makefile (which is fine and needed), we need to ensure
the OUTPUT directory exists, before executing (out of tree) clean
command.

Removing the feature's cleanup from perf Makefile and fixing
feature's cleanup under build Makefile, so it now checks that
there's existing OUTPUT directory before calling the clean.

Fixes: 211a741cd3e1 ("tools: Factor Clang, LLC and LLVM utils definitions")
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13-git
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210224150831.409639-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agoperf tools: Cast (struct timeval).tv_sec when printing
Pierre Gondois [Wed, 24 Feb 2021 18:24:10 +0000 (18:24 +0000)]
perf tools: Cast (struct timeval).tv_sec when printing

The musl-libc [1] defines (struct timeval).tv_sec as a 'long long' for
arm and other architectures. The default build having a '-Wformat' flag,
not casting the field when printing prevents from building perf.

This patch casts the (struct timeval).tv_sec fields to the expected
format.

[1] git://git.musl-libc.org/musl

Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Douglas.raillard@arm.com
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210224182410.5366-1-Pierre.Gondois@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agotools headers UAPI: Sync kvm.h headers with the kernel sources
Arnaldo Carvalho de Melo [Tue, 23 Feb 2021 12:56:50 +0000 (09:56 -0300)]
tools headers UAPI: Sync kvm.h headers with the kernel sources

To pick the changes in:

  d9a47edabc4f9481 ("KVM: PPC: Book3S HV: Introduce new capability for 2nd DAWR")
  8d4e7e80838f45d3 ("KVM: x86: declare Xen HVM shared info capability and add test case")
  40da8ccd724f7ca2 ("KVM: x86/xen: Add event channel interrupt vector upcall")

These new IOCTLs are now supported on 'perf trace':

  $ tools/perf/trace/beauty/kvm_ioctl.sh > before
  $ cp include/uapi/linux/kvm.h tools/include/uapi/linux/kvm.h
  $ tools/perf/trace/beauty/kvm_ioctl.sh > after
  $ diff -u before after
  --- before 2021-02-23 09:55:46.229058308 -0300
  +++ after 2021-02-23 09:55:57.509308058 -0300
  @@ -91,6 +91,10 @@
    [0xc1] = "GET_SUPPORTED_HV_CPUID",
    [0xc6] = "X86_SET_MSR_FILTER",
    [0xc7] = "RESET_DIRTY_RINGS",
  + [0xc8] = "XEN_HVM_GET_ATTR",
  + [0xc9] = "XEN_HVM_SET_ATTR",
  + [0xca] = "XEN_VCPU_GET_ATTR",
  + [0xcb] = "XEN_VCPU_SET_ATTR",
    [0xe0] = "CREATE_DEVICE",
    [0xe1] = "SET_DEVICE_ATTR",
    [0xe2] = "GET_DEVICE_ATTR",
  $

Addressing this perf build warning:
  Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
  diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h

Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agotools headers UAPI s390: Sync ptrace.h kernel headers
Arnaldo Carvalho de Melo [Tue, 23 Feb 2021 12:51:17 +0000 (09:51 -0300)]
tools headers UAPI s390: Sync ptrace.h kernel headers

To pick up the changes from:

  56e62a7370283601 ("s390: convert to generic entry")

That only adds two new defines, so shouldn't cause problems when
building the BPF selftests.

Silencing this perf build warning:

  Warning: Kernel ABI header at 'tools/arch/s390/include/uapi/asm/ptrace.h' differs from latest version at 'arch/s390/include/uapi/asm/ptrace.h'
  diff -u tools/arch/s390/include/uapi/asm/ptrace.h arch/s390/include/uapi/asm/ptrace.h

Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>