Heiner Kallweit [Thu, 8 Feb 2018 20:01:48 +0000 (21:01 +0100)]
net: phy: fix phy_start to consider PHY_IGNORE_INTERRUPT
This condition wasn't adjusted when PHY_IGNORE_INTERRUPT (-2) was added
long ago. In case of PHY_IGNORE_INTERRUPT the MAC interrupt indicates
also PHY state changes and we should do what the symbol says.
Fixes: 84a527a41f38 ("net: phylib: fix interrupts re-enablement in phy_start") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dean Nelson [Thu, 8 Feb 2018 19:21:05 +0000 (14:21 -0500)]
net: thunder: change q_len's type to handle max ring size
The Cavium thunder nicvf driver supports rx/tx rings of up to 65536 entries per.
The number of entires are stored in the q_len member of struct q_desc_mem. The
problem is that q_len being a u16, results in 65536 becoming 0.
In getting pointers to descriptors in the rings, the driver uses q_len minus 1
as a mask after incrementing the pointer, in order to go back to the beginning
and not go past the end of the ring.
With the q_len set to 0 the mask is no longer correct and the driver does go
beyond the end of the ring, causing various ills. Usually the first thing that
shows up is a "NETDEV WATCHDOG: enP2p1s0f1 (nicvf): transmit queue 7 timed out"
warning.
This patch remedies the problem by changing q_len to a u32.
Signed-off-by: Dean Nelson <dnelson@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 8 Feb 2018 20:32:25 +0000 (15:32 -0500)]
Merge tag 'wireless-drivers-next-for-davem-2018-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for 4.16
The most important here is the ssb fix, it has been reported by the
users frequently and the fix just missed the final v4.15. Also
numerous other fixes, mt76 had multiple problems with aggregation and
a long standing unaligned access bug in rtlwifi is finally fixed.
Major changes:
ath10k
* correct firmware RAM dump length for QCA6174/QCA9377
* add new QCA988X device id
* fix a kernel panic during pci probe
* revert a recent commit which broke ath10k firmware metadata parsing
ath9k
* fix a noise floor regression introduced during the merge window
* add new device id
rtlwifi
* fix unaligned access seen on ARM architecture
mt76
* various aggregation fixes which fix connection stalls
ssb
* fix b43 and b44 on non-MIPS which broke in v4.15-rc9
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Hoang Le [Thu, 8 Feb 2018 16:16:25 +0000 (17:16 +0100)]
tipc: fix skb truesize/datasize ratio control
In commit d618d09a68e4 ("tipc: enforce valid ratio between skb truesize
and contents") we introduced a test for ensuring that the condition
truesize/datasize <= 4 is true for a received buffer. Unfortunately this
test has two problems.
- Because of the integer arithmetics the test
if (skb->truesize / buf_roundup_len(skb) > 4) will miss all
ratios [4 < ratio < 5], which was not the intention.
- The buffer returned by skb_copy() inherits skb->truesize of the
original buffer, which doesn't help the situation at all.
In this commit, we change the ratio condition and replace skb_copy()
with a call to skb_copy_expand() to finally get this right.
Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Vecera [Thu, 8 Feb 2018 15:10:39 +0000 (16:10 +0100)]
net/sched: cls_u32: fix cls_u32 on filter replace
The following sequence is currently broken:
# tc qdisc add dev foo ingress
# tc filter replace dev foo protocol all ingress \
u32 match u8 0 0 action mirred egress mirror dev bar1
# tc filter replace dev foo protocol all ingress \
handle 800::800 pref 49152 \
u32 match u8 0 0 action mirred egress mirror dev bar2
Error: cls_u32: Key node flags do not match passed flags.
We have an error talking to the kernel, -1
The error comes from u32_change() when comparing new and
existing flags. The existing ones always contains one of
TCA_CLS_FLAGS_{,NOT}_IN_HW flag depending on offloading state.
These flags cannot be passed from userspace so the condition
(n->flags != flags) in u32_change() always fails.
Fix the condition so the flags TCA_CLS_FLAGS_NOT_IN_HW and
TCA_CLS_FLAGS_IN_HW are not taken into account.
Fixes: 24d3dc6d27ea ("net/sched: cls_u32: Reflect HW offload status") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Williams [Thu, 8 Feb 2018 06:34:24 +0000 (22:34 -0800)]
mpls, nospec: Sanitize array index in mpls_label_ok()
mpls_label_ok() validates that the 'platform_label' array index from a
userspace netlink message payload is valid. Under speculation the
mpls_label_ok() result may not resolve in the CPU pipeline until after
the index is used to access an array element. Sanitize the index to zero
to prevent userspace-controlled arbitrary out-of-bounds speculation, a
precursor for a speculative execution side channel vulnerability.
Cc: <stable@vger.kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
rds: tcp: use rds_destroy_pending() to synchronize netns/module teardown and rds connection/workq management
An rds_connection can get added during netns deletion between lines 528
and 529 of
506 static void rds_tcp_kill_sock(struct net *net)
:
/* code to pull out all the rds_connections that should be destroyed */
:
528 spin_unlock_irq(&rds_tcp_conn_lock);
529 list_for_each_entry_safe(tc, _tc, &tmp_list, t_tcp_node)
530 rds_conn_destroy(tc->t_cpath->cp_conn);
Such an rds_connection would miss out the rds_conn_destroy()
loop (that cancels all pending work) and (if it was scheduled
after netns deletion) could trigger the use-after-free.
A similar race-window exists for the module unload path
in rds_tcp_exit -> rds_tcp_destroy_conns
Concurrency with netns deletion (rds_tcp_kill_sock()) must be handled
by checking check_net() before enqueuing new work or adding new
connections.
Concurrency with module-unload is handled by maintaining a module
specific flag that is set at the start of the module exit function,
and must be checked before enqueuing new work or adding new connections.
This commit refactors existing RDS_DESTROY_PENDING checks added by
commit 3db6e0d172c9 ("rds: use RCU to synchronize work-enqueue with
connection teardown") and consolidates all the concurrency checks
listed above into the function rds_destroy_pending().
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kees Cook [Thu, 8 Feb 2018 01:44:38 +0000 (17:44 -0800)]
net: Whitelist the skbuff_head_cache "cb" field
Most callers of put_cmsg() use a "sizeof(foo)" for the length argument.
Within put_cmsg(), a copy_to_user() call is made with a dynamic size, as a
result of the cmsg header calculations. This means that hardened usercopy
will examine the copy, even though it was technically a fixed size and
should be implicitly whitelisted. All the put_cmsg() calls being built
from values in skbuff_head_cache are coming out of the protocol-defined
"cb" field, so whitelist this field entirely instead of creating per-use
bounce buffers, for which there are concerns about performance.
Reported-by: syzbot+e2d6cfb305e9f3911dea@syzkaller.appspotmail.com Fixes: 6d07d1cd300f ("usercopy: Restrict non-usercopy caches to size 0") Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
net: Extra '_get' in declaration of arch_get_platform_mac_address
In commit c7f5d105495a ("net: Add eth_platform_get_mac_address() helper."),
two declarations were added:
int eth_platform_get_mac_address(struct device *dev, u8 *mac_addr);
unsigned char *arch_get_platform_get_mac_address(void);
An extra '_get' was introduced in arch_get_platform_get_mac_address, remove
it. Fix compile warning using W=1:
CC net/ethernet/eth.o
net/ethernet/eth.c:523:24: warning: no previous prototype for ‘arch_get_platform_mac_address’ [-Wmissing-prototypes]
unsigned char * __weak arch_get_platform_mac_address(void)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
AR net/ethernet/built-in.o
Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Nathan Fontenot [Wed, 7 Feb 2018 19:00:24 +0000 (13:00 -0600)]
ibmvnic: queue reset when CRQ gets closed during reset
While handling a driver reset we get a H_CLOSED return trying
to send a CRQ event. When this occurs we need to queue up another
reset attempt. Without doing this we see instances where the driver
is left in a closed state because the reset failed and there is no
further attempts to reset the driver.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Add suffix ULL to constants 272, 204, 136 and 68 in order to give the
compiler complete information about the proper arithmetic to use.
Notice that these constants are used in contexts that expect
expressions of type unsigned long long (64 bits, unsigned).
The following expressions are currently being evaluated using 32-bit
arithmetic:
272 * mult
204 * mult
136 * mult
68 * mult
Addresses-Coverity-ID: 201058 Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Since we've added support for IFLA_IF_NETNSID for RTM_{DEL,GET,SET,NEW}LINK
it is possible for userspace to send us requests with three different
properties to identify a target network namespace. This affects at least
RTM_{NEW,SET}LINK. Each of them could potentially refer to a different
network namespace which is confusing. For legacy reasons the kernel will
pick the IFLA_NET_NS_PID property first and then look for the
IFLA_NET_NS_FD property but there is no reason to extend this type of
behavior to network namespace ids. The regression potential is quite
minimal since the rtnetlink requests in question either won't allow
IFLA_IF_NETNSID requests before 4.16 is out (RTM_{NEW,SET}LINK) or don't
support IFLA_NET_NS_{PID,FD} (RTM_{DEL,GET}LINK) in the first place.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Acked-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Wed, 7 Feb 2018 09:14:46 +0000 (17:14 +0800)]
tuntap: add missing xdp flush
When using devmap to redirect packets between interfaces,
xdp_do_flush() is usually a must to flush any batched
packets. Unfortunately this is missed in current tuntap
implementation.
Unlike most hardware driver which did XDP inside NAPI loop and call
xdp_do_flush() at then end of each round of poll. TAP did it in the
context of process e.g tun_get_user(). So fix this by count the
pending redirected packets and flush when it exceeds NAPI_POLL_WEIGHT
or MSG_MORE was cleared by sendmsg() caller.
With this fix, xdp_redirect_map works again between two TAPs.
Fixes: 761876c857cb ("tap: XDP support") Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Dichtel [Tue, 6 Feb 2018 13:48:32 +0000 (14:48 +0100)]
netlink: ensure to loop over all netns in genlmsg_multicast_allns()
Nowadays, nlmsg_multicast() returns only 0 or -ESRCH but this was not the
case when commit 134e63756d5f was pushed.
However, there was no reason to stop the loop if a netns does not have
listeners.
Returns -ESRCH only if there was no listeners in all netns.
To avoid having the same problem in the future, I didn't take the
assumption that nlmsg_multicast() returns only 0 or -ESRCH.
Fixes: 134e63756d5f ("genetlink: make netns aware") CC: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells [Thu, 8 Feb 2018 15:59:07 +0000 (15:59 +0000)]
rxrpc: Don't put crypto buffers on the stack
Don't put buffers of data to be handed to crypto on the stack as this may
cause an assertion failure in the kernel (see below). Fix this by using an
kmalloc'd buffer instead.
Reported-by: Jonathan Billings <jsbillings@jsbillings.org> Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Jonathan Billings <jsbillings@jsbillings.org> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
nfp: fix disabling TC offloads in flower, max TSO segs and module version
This set corrects the way nfp deals with the NETIF_F_HW_TC flag.
It has slipped the review that flower offload does not currently
refuse disabling this flag when filter offload is active.
nfp's flower offload does not actually keep track of how many filters
for each port are offloaded. The accounting of the number of filters
is added to the nfp core structures, and BPF moved to use these
structures as well.
If users are allowed to disable TC offloads while filters are active,
not only is it incorrect behaviour, but actually the NFP will never
be told to remove the flows, leading to use-after-free when stats
arrive.
Fourth patch makes sure we declare the max number of TSO segments.
FW should drop longer packets cleanly (otherwise this would be a
security problem for untrusted VFs) but dropping longer TSO frames
is not nice and driver should prevent them from being generated.
Last small addition populates MODULE_VERSION with kernel version.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 8 Feb 2018 04:55:26 +0000 (20:55 -0800)]
nfp: populate MODULE_VERSION
DKMS and similar out-of-tree module replacement services use
module version to make sure the out-of-tree software is not
older than the module shipped with the kernel. We use the
kernel version in ethtool -i output, put it into MODULE_VERSION
as well.
Reported-by: Jan Gutter <jan.gutter@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 8 Feb 2018 04:55:25 +0000 (20:55 -0800)]
nfp: limit the number of TSO segments
Most FWs limit the number of TSO segments a frame can produce
to 64. This is for fairness and efficiency (of FW datapath)
reasons. If a frame with larger number of segments is submitted
the FW will drop it.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 8 Feb 2018 04:55:24 +0000 (20:55 -0800)]
nfp: forbid disabling hw-tc-offload on representors while offload active
All netdevs which can accept TC offloads must implement
.ndo_set_features(). nfp_reprs currently do not do that, which
means hw-tc-offload can be turned on and off even when offloads
are active.
Whether the offloads are active is really a question to nfp_ports,
so remove the per-app tc_busy callback indirection thing, and
simply count the number of offloaded items in nfp_port structure.
Fixes: 8a2768732a4d ("nfp: provide infrastructure for offloading flower based TC filters") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Tested-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 8 Feb 2018 04:55:23 +0000 (20:55 -0800)]
nfp: don't advertise hw-tc-offload on non-port netdevs
nfp_port is a structure which represents an ASIC port, both
PCIe vNIC (on a PF or a VF) or the external MAC port. vNIC
netdev (struct nfp_net) and pure representor netdev (struct
nfp_repr) both have a pointer to this structure. nfp_reprs
always have a port associated. nfp_nets, however, only represent
a device port in legacy mode, where they are considered the
MAC port. In switchdev mode they are just the CPU's side of
the PCIe link.
By definition TC offloads only apply to device ports. Don't
set the flag on vNICs without a port (i.e. in switchdev mode).
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Tested-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 8 Feb 2018 04:55:22 +0000 (20:55 -0800)]
nfp: bpf: require ETH table
Upcoming changes will require all netdevs supporting TC offloads
to have a full struct nfp_port. Require those for BPF offload.
The operation without management FW reporting information about
Ethernet ports is something we only support for very old and very
basic NIC firmwares anyway.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Tested-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Song Liu [Wed, 7 Feb 2018 04:50:23 +0000 (20:50 -0800)]
tcp: tracepoint: only call trace_tcp_send_reset with full socket
tracepoint tcp_send_reset requires a full socket to work. However, it
may be called when in TCP_TIME_WAIT:
case TCP_TW_RST:
tcp_v6_send_reset(sk, skb);
inet_twsk_deschedule_put(inet_twsk(sk));
goto discard_it;
To avoid this problem, this patch checks the socket with sk_fullsock()
before calling trace_tcp_send_reset().
Fixes: c24b14c46bb8 ("tcp: add tracepoint trace_tcp_send_reset") Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
PING 172.16.101.2 (172.16.101.2) 56(84) bytes of data.
64 bytes from 172.16.101.2: icmp_seq=1 ttl=64 time=22.8 ms
64 bytes from 172.16.101.2: icmp_seq=2 ttl=64 time=10.9 ms
64 bytes from 172.16.101.2: icmp_seq=3 ttl=64 time=10.9 ms
64 bytes from 172.16.101.2: icmp_seq=5 ttl=64 time=11.4 ms
64 bytes from 172.16.101.2: icmp_seq=6 ttl=64 time=11.8 ms
64 bytes from 172.16.101.2: icmp_seq=4 ttl=64 time=4303 ms
64 bytes from 172.16.101.2: icmp_seq=10 ttl=64 time=11.2 ms
64 bytes from 172.16.101.2: icmp_seq=11 ttl=64 time=10.3 ms
64 bytes from 172.16.101.2: icmp_seq=7 ttl=64 time=4304 ms
64 bytes from 172.16.101.2: icmp_seq=8 ttl=64 time=4303 ms
Patch:
(rnd % (2 * sigma)) - sigma was overflowing s32. After applying the
patch, I found following output which is desirable.
PING 172.16.101.2 (172.16.101.2) 56(84) bytes of data.
64 bytes from 172.16.101.2: icmp_seq=1 ttl=64 time=21.1 ms
64 bytes from 172.16.101.2: icmp_seq=2 ttl=64 time=8.46 ms
64 bytes from 172.16.101.2: icmp_seq=3 ttl=64 time=9.00 ms
64 bytes from 172.16.101.2: icmp_seq=4 ttl=64 time=11.8 ms
64 bytes from 172.16.101.2: icmp_seq=5 ttl=64 time=8.36 ms
64 bytes from 172.16.101.2: icmp_seq=6 ttl=64 time=11.8 ms
64 bytes from 172.16.101.2: icmp_seq=7 ttl=64 time=8.11 ms
64 bytes from 172.16.101.2: icmp_seq=8 ttl=64 time=10.0 ms
64 bytes from 172.16.101.2: icmp_seq=9 ttl=64 time=11.3 ms
64 bytes from 172.16.101.2: icmp_seq=10 ttl=64 time=11.5 ms
64 bytes from 172.16.101.2: icmp_seq=11 ttl=64 time=10.2 ms
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
It was discovered that simple program which indefinitely sends 200b UDP
packets and runs on TI AM574x SoC (SMP) under RT Kernel triggers network
watchdog timeout in TI CPSW driver (<6 hours run). The network watchdog
timeout is triggered due to race between cpsw_ndo_start_xmit() and
cpsw_tx_handler() [NAPI]
cpsw_ndo_start_xmit()
if (unlikely(!cpdma_check_free_tx_desc(txch))) {
txq = netdev_get_tx_queue(ndev, q_idx);
netif_tx_stop_queue(txq);
^^ as per [1] barier has to be used after set_bit() otherwise new value
might not be visible to other cpus
}
cpsw_tx_handler()
if (unlikely(netif_tx_queue_stopped(txq)))
netif_tx_wake_queue(txq);
and when it happens ndev TX queue became disabled forever while driver's HW
TX queue is empty.
Fix this, by adding smp_mb__after_atomic() after netif_tx_stop_queue()
calls and double check for free TX descriptors after stopping ndev TX queue
- if there are free TX descriptors wake up ndev TX queue.
[1] https://www.kernel.org/doc/html/latest/core-api/atomic_ops.html Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Falcon [Tue, 6 Feb 2018 23:25:23 +0000 (17:25 -0600)]
ibmvnic: Ensure that buffers are NULL after free
This change will guard against a double free in the case that the
buffers were previously freed at some other time, such as during
a device reset. It resolves a kernel oops that occurred when changing
the VNIC device's MTU.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
John Allen [Tue, 6 Feb 2018 22:21:49 +0000 (16:21 -0600)]
ibmvnic: Fix rx queue cleanup for non-fatal resets
At some point, a check was added to exit the polling routine during resets.
This makes sense for most reset conditions, but for a non-fatal error, we
expect the polling routine to continue running to properly clean up the rx
queues. This patch checks if we are performing a non-fatal reset and if we
are, continues normal polling operation.
Signed-off-by: John Allen <jallen@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Amritha Nambiar [Tue, 6 Feb 2018 21:15:20 +0000 (13:15 -0800)]
i40e: Fix the number of queues available to be mapped for use
Fix the number of queues per enabled TC and report available queues
to the kernel without having to limit them to the max RSS limit so
they are available to be mapped for XPS. This allows a queue per
processing thread available for handling traffic for the given
traffic class.
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Tue, 6 Feb 2018 21:17:06 +0000 (13:17 -0800)]
net/ipv6: onlink nexthop checks should default to main table
Because of differences in how ipv4 and ipv6 handle fib lookups,
verification of nexthops with onlink flag need to default to the main
table rather than the local table used by IPv4. As it stands an
address within a connected route on device 1 can be used with
onlink on device 2. Updating the table properly rejects the route
due to the egress device mismatch.
Update the extack message as well to show it could be a device
mismatch for the nexthop spec.
Fixes: fc1e64e1092f ("net/ipv6: Add support for onlink flag") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Tue, 6 Feb 2018 20:14:12 +0000 (12:14 -0800)]
net/ipv6: Handle reject routes with onlink flag
Verification of nexthops with onlink flag need to handle unreachable
routes. The lookup is only intended to validate the gateway address
is not a local address and if the gateway resolves the egress device
must match the given device. Hence, hitting any default reject route
is ok.
Fixes: fc1e64e1092f ("net/ipv6: Add support for onlink flag") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Tue, 6 Feb 2018 19:34:23 +0000 (11:34 -0800)]
sun: Add SPDX license tags to Sun network drivers
Add the appropriate SPDX license tags to the Sun network drivers
as outlined in Documentation/process/license-rules.rst.
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells [Tue, 6 Feb 2018 16:44:12 +0000 (16:44 +0000)]
rxrpc: Fix received abort handling
AF_RXRPC is incorrectly sending back to the server any abort it receives
for a client connection. This is due to the final-ACK offload to the
connection event processor patch. The abort code is copied into the
last-call information on the connection channel and then the event
processor is set.
Instead, the following should be done:
(1) In the case of a final-ACK for a successful call, the ACK should be
scheduled as before.
(2) In the case of a locally generated ABORT, the ABORT details should be
cached for sending in response to further packets related to that
call and no further action scheduled at call disconnect time.
(3) In the case of an ACK received from the peer, the call should be
considered dead, no ABORT should be transmitted at this time. In
response to further non-ABORT packets from the peer relating to this
call, an RX_USER_ABORT ABORT should be transmitted.
(4) In the case of a call killed due to network error, an RX_USER_ABORT
ABORT should be cached for transmission in response to further
packets, but no ABORT should be sent at this time.
Fixes: 3136ef49a14c ("rxrpc: Delay terminal ACK transmission on a client call") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Commit baf5086840ab1 ("cxgb4: restructure VF mgmt code") has reordered
some code but an error handling label has not been updated accordingly.
So fix it and free 'adapter' if 't4_wait_dev_ready()' fails.
Fixes: baf5086840ab1 ("cxgb4: restructure VF mgmt code") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
The following patchset contains Netfilter fixes for you net tree, they
are:
1) Restore __GFP_NORETRY in xt_table allocations to mitigate effects of
large memory allocation requests, from Michal Hocko.
2) Release IPv6 fragment queue in case of error in fragmentation header,
this is a follow up to amend patch 83f1999caeb1, from Subash Abhinov
Kasiviswanathan.
3) Flowtable infrastructure depends on NETFILTER_INGRESS as it registers
a hook for each flowtable, reported by John Crispin.
4) Missing initialization of info->priv in xt_cgroup version 1, from
Cong Wang.
5) Give a chance to garbage collector to run after scheduling flowtable
cleanup.
6) Releasing flowtable content on nft_flow_offload module removal is
not required at all, there is not dependencies between this module
and flowtables, remove it.
7) Fix missing xt_rateest_mutex grabbing for hash insertions, also from
Cong Wang.
8) Move nf_flow_table_cleanup() routine to flowtable core, this patch is
a dependency for the next patch in this list.
9) Flowtable resources are not properly released on removal from the
control plane. Fix this resource leak by scheduling removal of all
entries and explicit call to the garbage collector.
10) nf_ct_nat_offset() declaration is dead code, this function prototype
is not used anywhere, remove it. From Taehee Yoo.
11) Fix another flowtable resource leak on entry insertion failures,
this patch also fixes a possible use-after-free. Patch from Felix
Fietkau.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Yu Wang [Tue, 30 Jan 2018 12:06:08 +0000 (14:06 +0200)]
ath10k: fix kernel panic issue during pci probe
If device gone during chip reset, ar->normal_mode_fw.board is not
initialized, but ath10k_debug_print_hwfw_info() will try to access its
member, which will cause 'kernel NULL pointer' issue. This was found
using a faulty device (pci link went down sometimes) in a random
insmod/rmmod/other-op test.
To fix it, check ar->normal_mode_fw.board before accessing the member.
Wojciech Dubowik [Tue, 30 Jan 2018 12:06:07 +0000 (14:06 +0200)]
ath9k: Fix get channel default noise floor
Commit 8da58553cc63 ("ath9k: Use calibrated noise floor value
when available") introduced regression in ath9k_hw_getchan_noise
where per chain nominal noise floor has been taken instead default
for channel.
Revert to original default channel noise floor.
Fixes: 8da58553cc63 ("ath9k: Use calibrated noise floor value when available") Reported-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Tobias Schramm [Tue, 30 Jan 2018 12:06:05 +0000 (14:06 +0200)]
ath10k: add support for Ubiquiti rebranded QCA988X v2
Some modern Ubiquiti devices contain a rebranded QCA988X rev2 with
a custom Ubiquiti vendor and device id. This patch adds support for
those devices, treating them as a QCA988X v2.
Signed-off-by: Tobias Schramm <tobleminer@gmail.com>
[kvalo@codeaurora.org: rebase, add missing fields in hw_params, fix a long line in pci.c:61] Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Yu Wang [Tue, 30 Jan 2018 12:06:01 +0000 (14:06 +0200)]
ath10k: correct the length of DRAM dump for QCA6174 hw3.x/QCA9377 hw1.1
The length of DRAM dump for QCA6174 hw3.0/hw3.2 and QCA9377 hw1.1
are less than the actual value, some coredump contents are missed.
To fix it, change the length from 0x90000 to 0xa8000.
Fixes: 703f261dd77f ("ath10k: add memory dump support for QCA6174/QCA9377") Signed-off-by: Yu Wang <yyuwang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Larry Finger [Mon, 5 Feb 2018 18:38:11 +0000 (12:38 -0600)]
rtlwifi: rtl8821ae: Fix connection lost problem correctly
There has been a coding error in rtl8821ae since it was first introduced,
namely that an 8-bit register was read using a 16-bit read in
_rtl8821ae_dbi_read(). This error was fixed with commit 40b368af4b75
("rtlwifi: Fix alignment issues"); however, this change led to
instability in the connection. To restore stability, this change
was reverted in commit b8b8b16352cd ("rtlwifi: rtl8821ae: Fix connection
lost problem").
Unfortunately, the unaligned access causes machine checks in ARM
architecture, and we were finally forced to find the actual cause of the
problem on x86 platforms. Following a suggestion from Pkshih
<pkshih@realtek.com>, it was found that increasing the ASPM L1
latency from 0 to 7 fixed the instability. This parameter was varied to
see if a smaller value would work; however, it appears that 7 is the
safest value. A new symbol is defined for this quantity, thus it can be
easily changed if necessary.
Fixes: b8b8b16352cd ("rtlwifi: rtl8821ae: Fix connection lost problem") Cc: Stable <stable@vger.kernel.org> # 4.14+ Fix-suggested-by: Pkshih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: James Cameron <quozl@laptop.org> # x86_64 OLPC NL3 Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Felix Fietkau [Wed, 7 Feb 2018 08:49:02 +0000 (09:49 +0100)]
netfilter: nf_flow_offload: fix use-after-free and a resource leak
flow_offload_del frees the flow, so all associated resource must be
freed before.
Since the ct entry in struct flow_offload_entry was allocated by
flow_offload_alloc, it should be freed by flow_offload_free to take care
of the error handling path when flow_offload_add fails.
While at it, make flow_offload_del static, since it should never be
called directly, only from the gc step
Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Linus Torvalds [Wed, 7 Feb 2018 03:57:31 +0000 (19:57 -0800)]
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- membarrier updates (Mathieu Desnoyers)
- SMP balancing optimizations (Mel Gorman)
- stats update optimizations (Peter Zijlstra)
- RT scheduler race fixes (Steven Rostedt)
- misc fixes and updates
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Use a recently used CPU as an idle candidate and the basis for SIS
sched/fair: Do not migrate if the prev_cpu is idle
sched/fair: Restructure wake_affine*() to return a CPU id
sched/fair: Remove unnecessary parameters from wake_affine_idle()
sched/rt: Make update_curr_rt() more accurate
sched/rt: Up the root domain ref count when passing it around via IPIs
sched/rt: Use container_of() to get root domain in rto_push_irq_work_func()
sched/core: Optimize update_stats_*()
sched/core: Optimize ttwu_stat()
membarrier/selftest: Test private expedited sync core command
membarrier/arm64: Provide core serializing command
membarrier/x86: Provide core serializing command
membarrier: Provide core serializing command, *_SYNC_CORE
lockin/x86: Implement sync_core_before_usermode()
locking: Introduce sync_core_before_usermode()
membarrier/selftest: Test global expedited command
membarrier: Provide GLOBAL_EXPEDITED command
membarrier: Document scheduler barrier requirements
powerpc, membarrier: Skip memory barrier in switch_mm()
membarrier/selftest: Test private expedited command
Linus Torvalds [Wed, 7 Feb 2018 03:28:19 +0000 (19:28 -0800)]
Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixlets from Ingo Molnar:
"An endianness fix and a jump labels branch hint update"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/qrwlock: include asm/byteorder.h as needed
jump_label: Add branch hints to static_branch_{un,}likely()
1) Fix error path in netdevsim, from Jakub Kicinski.
2) Default values listed in tcp_wmem and tcp_rmem documentation were
inaccurate, from Tonghao Zhang.
3) Fix route leaks in SCTP, both for ipv4 and ipv6. From Alexey Kodanev
and Tommi Rantala.
4) Fix "MASK < Y" meant to be "MASK << Y" in xgbe driver, from Wolfram
Sang.
5) Use after free in u32_destroy_key(), from Paolo Abeni.
6) Fix two TX issues in be2net driver, from Suredh Reddy.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (25 commits)
be2net: Handle transmit completion errors in Lancer
be2net: Fix HW stall issue in Lancer
RDS: IB: Fix null pointer issue
nfp: fix kdoc warnings on nested structures
sample/bpf: fix erspan metadata
net: erspan: fix erspan config overwrite
net: erspan: fix metadata extraction
cls_u32: fix use after free in u32_destroy_key()
net: amd-xgbe: fix comparison to bitshift when dealing with a mask
net: phy: Handle not having GPIO enabled in the kernel
ibmvnic: fix empty firmware version and errors cleanup
sctp: fix dst refcnt leak in sctp_v4_get_dst
sctp: fix dst refcnt leak in sctp_v6_get_dst()
dwc-xlgmac: remove Jie Deng as co-maintainer
doc: Change the min default value of tcp_wmem/tcp_rmem.
samples/bpf: use bpf_set_link_xdp_fd
libbpf: add missing SPDX-License-Identifier
libbpf: add error reporting in XDP
libbpf: add function to setup XDP
tools: add netlink.h and if_link.h in tools uapi
...
Joe Perches [Tue, 6 Feb 2018 23:42:41 +0000 (15:42 -0800)]
MAINTAINERS: update ARM/QUALCOMM SUPPORT patterns
Commit 321737416c72d ("tty: serial: msm: Move header file into driver")
removed the .h file, update the patterns.
Link: http://lkml.kernel.org/r/2b7478bc4c35ab3ac6b06b4edd3b645a8c34a4a2.1517147485.git.joe@perches.com Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Andy Gross <andy.gross@linaro.org> Cc: David Brown <david.brown@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Tue, 6 Feb 2018 23:42:37 +0000 (15:42 -0800)]
MAINTAINERS: update various PALM patterns
Commit 4c25c5d2985c ("ARM: pxa: make more mach/*.h files local") moved
the files around, update the patterns.
Link: http://lkml.kernel.org/r/a291f6f61e378a1f35e266fe4c5f646b9feeaa6a.1517147485.git.joe@perches.com Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tomas Cech <sleep_walker@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 9e6c62b05c1b ("ARM: dts: rename oxnas dts files") renamed the
files, update the patterns.
[akpm@linux-foundation.org: crunch into a single globbed term, per Arnd] Link: http://lkml.kernel.org/r/b39d779e143b3c0a4e7dff827346e509447e3e8e.1517147485.git.joe@perches.com Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Daniel Golle <daniel@makrotopia.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Tue, 6 Feb 2018 23:42:30 +0000 (15:42 -0800)]
MAINTAINERS: update Cortina/Gemini patterns
Commit 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit
ethernet") added invalid patterns. Fix it.
Link: http://lkml.kernel.org/r/65b104609e0071d0fbe0dcce3a8e6138a4cf8c25.1517147485.git.joe@perches.com Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Biggers [Tue, 6 Feb 2018 23:42:08 +0000 (15:42 -0800)]
pipe: read buffer limits atomically
The pipe buffer limits are accessed without any locking, and may be
changed at any time by the sysctl handlers. In theory this could cause
problems for expressions like the following:
... since the assembly code might reference the 'pipe_user_pages_hard'
memory location multiple times, and if the admin removes the limit by
setting it to 0, there is a very brief window where processes could
incorrectly observe the limit to be exceeded.
Fix this by loading the limits with READ_ONCE() prior to use.
Link: http://lkml.kernel.org/r/20180111052902.14409-8-ebiggers3@gmail.com Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: "Luis R . Rodriguez" <mcgrof@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Biggers [Tue, 6 Feb 2018 23:42:05 +0000 (15:42 -0800)]
pipe: simplify round_pipe_size()
round_pipe_size() calculates the number of pages the requested size
corresponds to, then rounds the page count up to the next power of 2.
However, it also rounds everything < PAGE_SIZE up to PAGE_SIZE.
Therefore, there's no need to actually translate the size into a page
count; we just need to round the size up to the next power of 2.
We do need to verify the size isn't greater than (1 << 31), since on
32-bit systems roundup_pow_of_two() would be undefined in that case. But
that can just be combined with the UINT_MAX check which we need anyway
now.
Finally, update pipe_set_size() to not redundantly check the return value
of round_pipe_size() for the "invalid size" case twice.
Link: http://lkml.kernel.org/r/20180111052902.14409-7-ebiggers3@gmail.com Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Luis R . Rodriguez" <mcgrof@kernel.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Biggers [Tue, 6 Feb 2018 23:42:00 +0000 (15:42 -0800)]
pipe: reject F_SETPIPE_SZ with size over UINT_MAX
A pipe's size is represented as an 'unsigned int'. As expected, writing a
value greater than UINT_MAX to /proc/sys/fs/pipe-max-size fails with
EINVAL. However, the F_SETPIPE_SZ fcntl silently truncates such values to
32 bits, rather than failing with EINVAL as expected. (It *does* fail
with EINVAL for values above (1 << 31) but <= UINT_MAX.)
Fix this by moving the check against UINT_MAX into round_pipe_size() which
is called in both cases.
Link: http://lkml.kernel.org/r/20180111052902.14409-6-ebiggers3@gmail.com Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Luis R . Rodriguez" <mcgrof@kernel.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Biggers [Tue, 6 Feb 2018 23:41:53 +0000 (15:41 -0800)]
pipe: actually allow root to exceed the pipe buffer limits
pipe-user-pages-hard and pipe-user-pages-soft are only supposed to apply
to unprivileged users, as documented in both Documentation/sysctl/fs.txt
and the pipe(7) man page.
However, the capabilities are actually only checked when increasing a
pipe's size using F_SETPIPE_SZ, not when creating a new pipe. Therefore,
if pipe-user-pages-hard has been set, the root user can run into it and be
unable to create pipes. Similarly, if pipe-user-pages-soft has been set,
the root user can run into it and have their pipes limited to 1 page each.
Fix this by allowing the privileged override in both cases.
Link: http://lkml.kernel.org/r/20180111052902.14409-4-ebiggers3@gmail.com Fixes: 759c01142a5d ("pipe: limit the per-user amount of pages allocated in pipes") Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Luis R . Rodriguez" <mcgrof@kernel.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Willy Tarreau <w@1wt.eu> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Biggers [Tue, 6 Feb 2018 23:41:49 +0000 (15:41 -0800)]
pipe, sysctl: remove pipe_proc_fn()
pipe_proc_fn() is no longer needed, as it only calls through to
proc_dopipe_max_size(). Just put proc_dopipe_max_size() in the ctl_table
entry directly, and remove the unneeded EXPORT_SYMBOL() and the ENOSYS
stub for it.
(The reason the ENOSYS stub isn't needed is that the pipe-max-size
ctl_table entry is located directly in 'kern_table' rather than being
registered separately. Therefore, the entry is already only defined when
the kernel is built with sysctl support.)
Link: http://lkml.kernel.org/r/20180111052902.14409-3-ebiggers3@gmail.com Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Luis R . Rodriguez" <mcgrof@kernel.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Biggers [Tue, 6 Feb 2018 23:41:45 +0000 (15:41 -0800)]
pipe, sysctl: drop 'min' parameter from pipe-max-size converter
Patch series "pipe: buffer limits fixes and cleanups", v2.
This series simplifies the sysctl handler for pipe-max-size and fixes
another set of bugs related to the pipe buffer limits:
- The root user wasn't allowed to exceed the limits when creating new
pipes.
- There was an off-by-one error when checking the limits, so a limit of
N was actually treated as N - 1.
- F_SETPIPE_SZ accepted values over UINT_MAX.
- Reading the pipe buffer limits could be racy.
This patch (of 7):
Before validating the given value against pipe_min_size,
do_proc_dopipe_max_size_conv() calls round_pipe_size(), which rounds the
value up to pipe_min_size. Therefore, the second check against
pipe_min_size is redundant. Remove it.
Link: http://lkml.kernel.org/r/20180111052902.14409-2-ebiggers3@gmail.com Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Luis R . Rodriguez" <mcgrof@kernel.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arnd Bergmann [Tue, 6 Feb 2018 23:41:41 +0000 (15:41 -0800)]
kasan: rework Kconfig settings
We get a lot of very large stack frames using gcc-7.0.1 with the default
-fsanitize-address-use-after-scope --param asan-stack=1 options, which can
easily cause an overflow of the kernel stack, e.g.
drivers/gpu/drm/i915/gvt/handlers.c:2434:1: warning: the frame size of 46176 bytes is larger than 3072 bytes
drivers/net/wireless/ralink/rt2x00/rt2800lib.c:5650:1: warning: the frame size of 23632 bytes is larger than 3072 bytes
lib/atomic64_test.c:250:1: warning: the frame size of 11200 bytes is larger than 3072 bytes
drivers/gpu/drm/i915/gvt/handlers.c:2621:1: warning: the frame size of 9208 bytes is larger than 3072 bytes
drivers/media/dvb-frontends/stv090x.c:3431:1: warning: the frame size of 6816 bytes is larger than 3072 bytes
fs/fscache/stats.c:287:1: warning: the frame size of 6536 bytes is larger than 3072 bytes
To reduce this risk, -fsanitize-address-use-after-scope is now split out
into a separate CONFIG_KASAN_EXTRA Kconfig option, leading to stack
frames that are smaller than 2 kilobytes most of the time on x86_64. An
earlier version of this patch also prevented combining KASAN_EXTRA with
KASAN_INLINE, but that is no longer necessary with gcc-7.0.1.
All patches to get the frame size below 2048 bytes with CONFIG_KASAN=y
and CONFIG_KASAN_EXTRA=n have been merged by maintainers now, so we can
bring back that default now. KASAN_EXTRA=y still causes lots of
warnings but now defaults to !COMPILE_TEST to disable it in
allmodconfig, and it remains disabled in all other defconfigs since it
is a new option. I arbitrarily raise the warning limit for KASAN_EXTRA
to 3072 to reduce the noise, but an allmodconfig kernel still has around
50 warnings on gcc-7.
I experimented a bit more with smaller stack frames and have another
follow-up series that reduces the warning limit for 64-bit architectures
to 1280 bytes (without CONFIG_KASAN).
With earlier versions of this patch series, I also had patches to address
the warnings we get with KASAN and/or KASAN_EXTRA, using a
"noinline_if_stackbloat" annotation.
That annotation now got replaced with a gcc-8 bugfix (see
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715) and a workaround for
older compilers, which means that KASAN_EXTRA is now just as bad as
before and will lead to an instant stack overflow in a few extreme
cases.
This reverts parts of commit 3f181b4d8652 ("lib/Kconfig.debug: disable
-Wframe-larger-than warnings with KASAN=y"). Two patches in linux-next
should be merged first to avoid introducing warnings in an allmodconfig
build: 3cd890dbe2a4 ("media: dvb-frontends: fix i2c access helpers for KASAN") 16c3ada89cff ("media: r820t: fix r820t_write_reg for KASAN")
Do we really need to backport this?
I think we do: without this patch, enabling KASAN will lead to
unavoidable kernel stack overflow in certain device drivers when built
with gcc-7 or higher on linux-4.10+ or any version that contains a
backport of commit c5caf21ab0cf8. Most people are probably still on
older compilers, but it will get worse over time as they upgrade their
distros.
The warnings we get on kernels older than this should all be for code
that uses dangerously large stack frames, though most of them do not
cause an actual stack overflow by themselves.The asan-stack option was
added in linux-4.0, and commit 3f181b4d8652 ("lib/Kconfig.debug:
disable -Wframe-larger-than warnings with KASAN=y") effectively turned
off the warning for allmodconfig kernels, so I would like to see this
fix backported to any kernels later than 4.0.
I have done dozens of fixes for individual functions with stack frames
larger than 2048 bytes with asan-stack, and I plan to make sure that
all those fixes make it into the stable kernels as well (most are
already there).
Part of the complication here is that asan-stack (from 4.0) was
originally assumed to always require much larger stacks, but that
turned out to be a combination of multiple gcc bugs that we have now
worked around and fixed, but sanitize-address-use-after-scope (from
v4.10) has a much higher inherent stack usage and also suffers from at
least three other problems that we have analyzed but not yet fixed
upstream, each of them makes the stack usage more severe than it should
be.
The file was converted from print_symbol() to %pf some time ago in
commit ef26f20cd117 ("genirq: Print threaded handler in spurious debug
output"). kallsyms does not seem to be needed anymore.
Link: http://lkml.kernel.org/r/20171208025616.16267-10-sergey.senozhatsky@gmail.com Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The file was converted from print_symbol() to %pSR a while ago in commit 071361d3473e ("mm: Convert print_symbol to %pSR"). kallsyms does not
seem to be needed anymore.
Shakeel Butt [Tue, 6 Feb 2018 23:40:59 +0000 (15:40 -0800)]
vfs: remove might_sleep() from clear_inode()
Commit 7994e6f72543 ("vfs: Move waiting for inode writeback from
end_writeback() to evict_inode()") removed inode_sync_wait() from
end_writeback() and commit dbd5768f87ff ("vfs: Rename end_writeback() to
clear_inode()") renamed end_writeback() to clear_inode().
After these patches there is no sleeping operation in clear_inode().
So, remove might_sleep() from it.
Link: http://lkml.kernel.org/r/20171108004354.40308-1-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Greg Thelen <gthelen@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jonathan Haws [Tue, 6 Feb 2018 23:40:52 +0000 (15:40 -0800)]
ipc/mqueue.c: have RT tasks queue in by priority in wq_add()
Previous behavior added tasks to the work queue using the static_prio
value instead of the dynamic priority value in prio. This caused RT tasks
to be added to the work queue in a FIFO manner rather than by priority.
Normal tasks were handled by priority.
This fix utilizes the dynamic priority of the task to ensure that both RT
and normal tasks are added to the work queue in priority order. Utilizing
the dynamic priority (prio) rather than the base priority (normal_prio)
was chosen to ensure that if a task had a boosted priority when it was
added to the work queue, it would be woken sooner to to ensure that it
releases any other locks it may be holding in a more timely manner. It is
understood that the task could have a lower priority when it wakes than
when it was added to the queue in this (unlikely) case.
Link: http://lkml.kernel.org/r/1513006652-7014-1-git-send-email-jhaws@sdl.usu.edu Signed-off-by: Jonathan Haws <jhaws@sdl.usu.edu> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Davidlohr Bueso <dbueso@suse.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Deepa Dinamani <deepa.kernel@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As described in the title, this patch fixes <ipc>id_ds inconsistency when
<ipc>ctl_stat executes concurrently with some ds-changing function, e.g.
shmat, msgsnd or whatever.
For instance, if shmctl(IPC_STAT) is running concurrently
with shmat, following data structure can be returned:
{... shm_lpid = 0, shm_nattch = 1, ...}
Link: http://lkml.kernel.org/r/20171202153456.6514-1-philippe.mikoyan@skat.systems Signed-off-by: Philippe Mikoyan <philippe.mikoyan@skat.systems> Reviewed-by: Davidlohr Bueso <dbueso@suse.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Similarly to type mismatch checks, new GCC 8.x and Clang also changed for
ABI for returns_nonnull checks. While we can update our code to conform
the new ABI it's more reasonable to just remove it. Because it's just
dead code, we don't have any single user of returns_nonnull attribute in
the whole kernel.
And AFAIU the advantage that this attribute could bring would be mitigated
by -fno-delete-null-pointer-checks cflag that we use to build the kernel.
So it's unlikely we will have a lot of returns_nonnull attribute in
future.
Andrey Ryabinin [Tue, 6 Feb 2018 23:40:42 +0000 (15:40 -0800)]
lib/ubsan: add type mismatch handler for new GCC/Clang
UBSAN=y fails to build with new GCC/clang:
arch/x86/kernel/head64.o: In function `sanitize_boot_params':
arch/x86/include/asm/bootparam_utils.h:37: undefined reference to `__ubsan_handle_type_mismatch_v1'
because Clang and GCC 8 slightly changed ABI for 'type mismatch' errors.
Compiler now uses new __ubsan_handle_type_mismatch_v1() function with
slightly modified 'struct type_mismatch_data'.
Let's add new 'struct type_mismatch_data_common' which is independent from
compiler's layout of 'struct type_mismatch_data'. And make
__ubsan_handle_type_mismatch[_v1]() functions transform compiler-dependent
type mismatch data to our internal representation. This way, we can
support both old and new compilers with minimal amount of change.
Dmitry Vyukov [Tue, 6 Feb 2018 23:40:28 +0000 (15:40 -0800)]
kcov: detect double association with a single task
Currently KCOV_ENABLE does not check if the current task is already
associated with another kcov descriptor. As the result it is possible
to associate a single task with more than one kcov descriptor, which
later leads to a memory leak of the old descriptor. This relation is
really meant to be one-to-one (task has only one back link).
Arnd Bergmann [Tue, 6 Feb 2018 23:40:21 +0000 (15:40 -0800)]
pps: parport: use timespec64 instead of timespec
getnstimeofday() is deprecated, so I'm converting this to use
ktime_get_real_ts64() as a safe replacement. I considered using
ktime_get_real() instead, but since the algorithm here depends on the
exact timing, I decided to introduce fewer changes and leave the code
that determines the nanoseconds since the last seconds wrap untouched.
It's not entirely clear to me whether we should also change the time
base to CLOCK_BOOTTIME or CLOCK_TAI. With boottime, we would be
independent of changes due to settimeofday() and only see the speed
adjustment from the upstream clock source, with the downside of having
the signal be at an arbirary offset from the start of the UTC second
signal. With CLOCK_TAI, we would use the same offset from the UTC
second as before and still suffer from settimeofday() adjustments, but
would be less confused during leap seconds.
Both boottime and tai only offer usable (i.e. avoiding ktime_t to
timespec64 conversion) interfaces for ktime_t though, so either way,
changing it wouldn't take significantly more work. CLOCK_MONOTONIC
could be used with ktime_get_ts64(), but would lose synchronization
across a suspend/resume cycle, which seems worse.
Markus Elfring [Tue, 6 Feb 2018 23:39:51 +0000 (15:39 -0800)]
rapidio: improve a size determination in five functions
Replace the specification of data structures by pointer dereferences as
the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style
convention.
This issue was detected by using the Coccinelle software.
Link: http://lkml.kernel.org/r/495f571c-fb4d-b1d5-a6e5-494f2c537a8d@users.sourceforge.net Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / mirror_ubuntu-eoan-kernel.git / log