Linus Torvalds [Thu, 9 Feb 2023 17:09:13 +0000 (09:09 -0800)]
Merge tag 'for-linus-2023020901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- fix potential infinite loop with a badly crafted HID device (Xin
Zhao)
- fix regression from 6.1 in USB logitech devices potentially making
their mouse wheel not working (Bastien Nocera)
- clean up in AMD sensors, which fixes a long time resume bug (Mario
Limonciello)
- few device small fixes and quirks
* tag 'for-linus-2023020901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: Ignore battery for ELAN touchscreen 29DF on HP
HID: amd_sfh: if no sensors are enabled, clean up
HID: logitech: Disable hi-res scrolling on USB
HID: core: Fix deadloop in hid_apply_multiplier.
HID: Ignore battery for Elan touchscreen on Asus TP420IA
HID: elecom: add support for TrackBall 056E:011C
Linus Torvalds [Tue, 7 Feb 2023 22:17:12 +0000 (14:17 -0800)]
Merge tag 'devicetree-fixes-for-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix handling of multiple OF framebuffer devices
- Fix booting on Socionext Synquacer with bad 'dma-ranges' entries
- Add DT binding .yamllint to .gitignore
* tag 'devicetree-fixes-for-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: interrupt-controller: arm,gic-v3: Fix typo in description of msi-controller property
dt-bindings: Fix .gitignore
of/address: Return an error when no valid dma-ranges are found
of: Make OF framebuffer device names unique
Linus Torvalds [Tue, 7 Feb 2023 15:54:40 +0000 (07:54 -0800)]
Merge tag 'trace-v6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix regression in poll() and select()
With the fix that made poll() and select() block if read would block
caused a slight regression in rasdaemon, as it needed that kind of
behavior. Add a way to make that behavior come back by writing zero
into the 'buffer_percentage', which means to never block on read"
* tag 'trace-v6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix poll() and select() do not work on per_cpu trace_pipe and trace_pipe_raw
Last potentially related work creation:
kasan_save_stack+0x22/0x50
__kasan_record_aux_stack+0x95/0xb0
insert_work+0x2b/0x130
__queue_work+0x1fe/0x660
queue_work_on+0x4b/0x60
smb2_readv_callback+0x396/0x800
cifs_abort_connection+0x474/0x6a0
cifs_reconnect+0x5cb/0xa50
cifs_readv_from_socket.cold+0x22/0x6c
cifs_read_page_from_socket+0xc1/0x100
readpages_fill_pages.cold+0x2f/0x46
cifs_readv_receive+0x46d/0xa40
cifs_demultiplex_thread+0x121c/0x1490
kthread+0x16b/0x1a0
ret_from_fork+0x2c/0x50
The following function calls will cause UAF of the rdata pointer.
readpages_fill_pages
cifs_read_page_from_socket
cifs_readv_from_socket
cifs_reconnect
__cifs_reconnect
cifs_abort_connection
mid->callback() --> smb2_readv_callback
queue_work(&rdata->work) # if the worker completes first,
# the rdata is freed
cifs_readv_complete
kref_put
cifs_readdata_release
kfree(rdata)
return rdata->... # UAF in readpages_fill_pages()
Similarly, this problem also occurs in the uncache_fill_pages().
Fix this by adjusts the order of condition judgment in the return
statement.
Signed-off-by: ZhaoLong Wang <wangzhaolong1@huawei.com> Cc: stable@vger.kernel.org Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
Linus Torvalds [Mon, 6 Feb 2023 22:07:38 +0000 (14:07 -0800)]
Merge tag 'cgroup-for-6.2-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
"During the v6.2 cycle, there were a series of changes to task cpu
affinity handling which fixed cpuset inadvertently clobbering
user-configured affinity masks. Unfortunately, they broke the affinity
handling on hybrid heterogeneous CPUs which have cores that can
execute both 64 and 32bit along with cores that can only execute 32bit
code.
This contains two fix patches for the above issue. While reverting the
changes that caused the regression is definitely an option, the
origial patches do improve how cpuset behave signficantly in some
cases and the fixes seem fairly safe, so I think it'd be better to try
to fix them first"
* tag 'cgroup-for-6.2-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cpuset: Call set_cpus_allowed_ptr() with appropriate mask for task
cgroup/cpuset: Don't filter offline CPUs in cpuset_cpus_allowed() for top cpuset tasks
Linus Torvalds [Mon, 6 Feb 2023 22:05:16 +0000 (14:05 -0800)]
Merge tag 'for-6.2-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- explicitly initialize zlib work memory to fix a KCSAN warning
- limit number of send clones by maximum memory allocated
- limit device size extent in case it device shrink races with chunk
allocation
- raid56 fixes:
- fix copy&paste error in RAID6 stripe recovery
- make error bitmap update atomic
* tag 'for-6.2-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: raid56: make error_bitmap update atomic
btrfs: send: limit number of clones and allocated memory size
btrfs: zlib: zero-initialize zlib workspace
btrfs: limit device extents to the device size
btrfs: raid56: fix stripes if vertical errors are found
Will Deacon [Tue, 31 Jan 2023 22:17:19 +0000 (22:17 +0000)]
cpuset: Call set_cpus_allowed_ptr() with appropriate mask for task
set_cpus_allowed_ptr() will fail with -EINVAL if the requested
affinity mask is not a subset of the task_cpu_possible_mask() for the
task being updated. Consequently, on a heterogeneous system with cpusets
spanning the different CPU types, updates to the cgroup hierarchy can
silently fail to update task affinities when the effective affinity
mask for the cpuset is expanded.
For example, consider an arm64 system with 4 CPUs, where CPUs 2-3 are
the only cores capable of executing 32-bit tasks. Attaching a 32-bit
task to a cpuset containing CPUs 0-2 will correctly affine the task to
CPU 2. Extending the cpuset to CPUs 0-3, however, will fail to extend
the affinity mask of the 32-bit task because update_tasks_cpumask() will
pass the full 0-3 mask to set_cpus_allowed_ptr().
Extend update_tasks_cpumask() to take a temporary 'cpumask' paramater
and use it to mask the 'effective_cpus' mask with the possible mask for
each task being updated.
Fixes: 431c69fac05b ("cpuset: Honour task_cpu_possible_mask() in guarantee_online_cpus()") Signed-off-by: Will Deacon <will@kernel.org> Acked-by: Waiman Long <longman@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
Waiman Long [Mon, 6 Feb 2023 03:48:53 +0000 (22:48 -0500)]
cgroup/cpuset: Don't filter offline CPUs in cpuset_cpus_allowed() for top cpuset tasks
Since commit 8f9ea86fdf99 ("sched: Always preserve the user
requested cpumask"), relax_compatible_cpus_allowed_ptr() is calling
__sched_setaffinity() unconditionally. This helps to expose a bug in
the current cpuset hotplug code where the cpumasks of the tasks in
the top cpuset are not updated at all when some CPUs become online or
offline. It is likely caused by the fact that some of the tasks in the
top cpuset, like percpu kthreads, cannot have their cpu affinity changed.
One way to reproduce this as suggested by Peter is:
- boot machine
- offline all CPUs except one
- taskset -p ffffffff $$
- online all CPUs
Fix this by allowing cpuset_cpus_allowed() to return a wider mask that
includes offline CPUs for those tasks that are in the top cpuset. For
tasks not in the top cpuset, the old rule applies and only online CPUs
will be returned in the mask since hotplug events will update their
cpumasks accordingly.
Fixes: 8f9ea86fdf99 ("sched: Always preserve the user requested cpumask") Reported-by: Will Deacon <will@kernel.org>
Originally-from: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Will Deacon <will@kernel.org> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
Luka Guzenko [Fri, 20 Jan 2023 22:37:41 +0000 (23:37 +0100)]
HID: Ignore battery for ELAN touchscreen 29DF on HP
The touchscreen reports a battery status of 0% and jumps to 1% when a
stylus is used. The device ID was added and the battery ignore quirk was
enabled for it.
It was reported that commit b300667b33b2 ("HID: amd_sfh: Disable the
interrupt for all command") had caused increased resume time on HP Envy
x360.
Before this commit 3 sensors were reported, but they were not actually
functional. After this commit the sensors are no longer reported, but
also the resume time increased.
To avoid this problem explicitly look for the number of disabled sensors.
If all the sensors are disabled, clean everything up.
Bastien Nocera [Fri, 3 Feb 2023 10:18:00 +0000 (11:18 +0100)]
HID: logitech: Disable hi-res scrolling on USB
On some Logitech mice, such as the G903, and possibly the G403, the HID
events are generated on a different interface to the HID++ one.
If we enable hi-res through the HID++ interface, the HID interface
wouldn't know anything about it, and handle the events as if they were
regular scroll events, making the mouse unusable.
Disable hi-res scrolling on those devices until we implement scroll
events through HID++.
Xin Zhao [Mon, 30 Jan 2023 21:29:47 +0000 (21:29 +0000)]
HID: core: Fix deadloop in hid_apply_multiplier.
The initial value of hid->collection[].parent_idx if 0. When
Report descriptor doesn't contain "HID Collection", the value
remains as 0.
In the meanwhile, when the Report descriptor fullfill
all following conditions, it will trigger hid_apply_multiplier
function call.
1. Usage page is Generic Desktop Ctrls (0x01)
2. Usage is RESOLUTION_MULTIPLIER (0x48)
3. Contain any FEATURE items
The while loop in hid_apply_multiplier will search the top-most
collection by searching parent_idx == -1. Because all parent_idx
is 0. The loop will run forever.
There is a Report Descriptor triggerring the deadloop
0x05, 0x01, // Usage Page (Generic Desktop Ctrls)
0x09, 0x48, // Usage (0x48)
0x95, 0x01, // Report Count (1)
0x75, 0x08, // Report Size (8)
0xB1, 0x01, // Feature
Linus Torvalds [Mon, 6 Feb 2023 01:17:10 +0000 (17:17 -0800)]
Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull ELF fix from Al Viro:
"One of the many equivalent build warning fixes for !CONFIG_ELF_CORE
configs. Geert's is the earliest one I've been able to find"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
coredump: Move dump_emit_page() to kill unused warning
Linus Torvalds [Sun, 5 Feb 2023 20:19:55 +0000 (12:19 -0800)]
Merge tag 'usb-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes that resolve some reported problems.
These include:
- gadget driver fixes
- dwc3 driver fix
- typec driver fix
- MAINTAINERS file update.
All of these have been in linux-next with no reported problems"
* tag 'usb-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: ucsi: Don't attempt to resume the ports before they exist
usb: gadget: udc: do not clear gadget driver.bus
usb: gadget: f_uac2: Fix incorrect increment of bNumEndpoints
usb: gadget: f_fs: Fix unbalanced spinlock in __ffs_ep0_queue_wait
usb: dwc3: qcom: enable vbus override when in OTG dr-mode
MAINTAINERS: Add myself as UVC Gadget Maintainer
Linus Torvalds [Sun, 5 Feb 2023 20:06:29 +0000 (12:06 -0800)]
Merge tag 'tty-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small serial and vt fixes. These include:
- 8250 driver fixes relating to dma issues
- stm32 serial driver fix for threaded irqs
- vc_screen bugfix for reported problems.
All have been in linux-next for a while with no reported problems"
* tag 'tty-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAF
serial: 8250_dma: Fix DMA Rx rearm race
serial: 8250_dma: Fix DMA Rx completion race
serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
Linus Torvalds [Sun, 5 Feb 2023 19:43:00 +0000 (11:43 -0800)]
Merge tag 'fbdev-for-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
- fix fbcon to prevent fonts bigger than 32x32 pixels to avoid
overflows reported by syzbot
- switch omapfb to use kstrtobool()
- switch some fbdev drivers to use the backlight helpers
* tag 'fbdev-for-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbcon: Check font dimension limits
fbdev: omapfb: Use kstrtobool() instead of strtobool()
fbdev: fbmon: fix function name in kernel-doc
fbdev: atmel_lcdfb: Rework backlight status updates
fbdev: riva: Use backlight helper
fbdev: omapfb: panel-dsi-cm: Use backlight helper
fbdev: nvidia: Use backlight helper
fbdev: mx3fb: Use backlight helper
fbdev: radeon: Use backlight helper
fbdev: atyfb: Use backlight helper
fbdev: aty128fb: Use backlight helper
Linus Torvalds [Sun, 5 Feb 2023 19:28:42 +0000 (11:28 -0800)]
Merge tag 'x86_urgent_for_v6.2_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
- Prevent the compiler from reordering accesses to debug regs which
could cause a #VC exception in SEV-ES guests at the wrong place in
the NMI handling path
* tag 'x86_urgent_for_v6.2_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/debug: Fix stack recursion caused by wrongly ordered DR7 accesses
Linus Torvalds [Sun, 5 Feb 2023 02:40:51 +0000 (18:40 -0800)]
Merge tag 'powerpc-6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"It's a bit of a big batch for rc6, but just because I didn't send any
fixes the last week or two while I was on vacation, next week should
be quieter:
- Fix a few objtool warnings since we recently enabled objtool.
- Fix a deadlock with the hash MMU vs perf record.
- Fix perf profiling of asynchronous interrupt handlers.
- Revert the IMC PMU nest_init_lock to being a mutex.
- Two commits fixing problems with the kexec_file FDT size
estimation.
- Two commits fixing problems with strict RWX vs kernels running at
non-zero.
- Reconnect tlb_flush() to hash__tlb_flush()
Thanks to Kajol Jain, Nicholas Piggin, Sachin Sant Sathvika Vasireddy,
and Sourabh Jain"
* tag 'powerpc-6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Reconnect tlb_flush() to hash__tlb_flush()
powerpc/kexec_file: Count hot-pluggable memory in FDT estimate
powerpc/64s/radix: Fix RWX mapping with relocated kernel
powerpc/64s/radix: Fix crash with unaligned relocated kernel
powerpc/kexec_file: Fix division by zero in extra size estimation
powerpc/imc-pmu: Revert nest_init_lock to being a mutex
powerpc/64: Fix perf profiling asynchronous interrupt handlers
powerpc/64s: Fix local irq disable when PMIs are disabled
powerpc/kvm: Fix unannotated intra-function call warning
powerpc/85xx: Fix unannotated intra-function call warning
Linus Torvalds [Sat, 4 Feb 2023 21:46:37 +0000 (13:46 -0800)]
Merge tag 'rtc-6.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC fixes from Alexandre Belloni:
"Here are a few fixes for 6.2. The EFI one is the most important as it
allows some RTCs to actually work. The other two are warnings that are
worth fixing.
- efi: make WAKEUP services optional
- sunplus: fix format string warning"
* tag 'rtc-6.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: sunplus: fix format string for printing resource
dt-bindings: rtc: qcom-pm8xxx: allow 'wakeup-source' property
rtc: efi: Enable SET/GET WAKEUP services as optional
Linus Torvalds [Sat, 4 Feb 2023 19:30:23 +0000 (11:30 -0800)]
Merge tag 'kbuild-fixes-v6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix two bugs (for building and for signing) when MODULE_SIG_KEY
contains a PKCS#11 URI
* tag 'kbuild-fixes-v6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: modinst: Fix build error when CONFIG_MODULE_SIG_KEY is a PKCS#11 URI
certs: Fix build error when PKCS#11 URI contains semicolon
Linus Torvalds [Sat, 4 Feb 2023 19:21:27 +0000 (11:21 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Yet another fix for non-CPU accesses to the memory backing the
VGICv3 subsystem
- A set of fixes for the setlftest checking for the S1PTW behaviour
after the fix that went in ealier in the cycle"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: selftests: aarch64: Test read-only PT memory regions
KVM: selftests: aarch64: Fix check of dirty log PT write
KVM: selftests: aarch64: Do not default to dirty PTE pages on all S1PTWs
KVM: selftests: aarch64: Relax userfaultfd read vs. write checks
KVM: arm64: Allow no running vcpu on saving vgic3 pending table
KVM: arm64: Allow no running vcpu on restoring vgic3 LPI pending status
KVM: arm64: Add helper vgic_write_guest_lock()
Linus Torvalds [Sat, 4 Feb 2023 19:15:00 +0000 (11:15 -0800)]
Merge tag 'parisc-for-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
- Fix PTRACE_GETREGS/PTRACE_SETREGS for 32-bit userspace on a 64-bit
kernel
- pdc_iodc_print() dropped chars for newline in strings
- Drop constants in favour of PRIV_USER
- use safer strscpy() function in pdc_stable driver
* tag 'parisc-for-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Wire up PTRACE_GETREGS/PTRACE_SETREGS for compat case
parisc: Replace hardcoded value with PRIV_USER constant in ptrace.c
parisc: Fix return code of pdc_iodc_print()
parisc: pdc_stable: use strscpy() to instead of strncpy()
Linus Torvalds [Sat, 4 Feb 2023 18:14:50 +0000 (10:14 -0800)]
Merge tag 'for-linus' of https://github.com/openrisc/linux
Pull OpenRISC mailing list update from Stafford Horne:
"The old mailing list for OpenRISC died due to some infrastructure
issues and the people in charge decided not to keep it running. We
have migrated this and the users over to kernel.org infrastructure.
Sending this out now to avoid kernel developers getting lots of
bounced mails for using the old list"
* tag 'for-linus' of https://github.com/openrisc/linux:
MAINTAINERS: Update OpenRISC mailing list
Samuel Thibault [Sun, 29 Jan 2023 15:17:40 +0000 (16:17 +0100)]
fbcon: Check font dimension limits
blit_x and blit_y are u32, so fbcon currently cannot support fonts
larger than 32x32.
The 32x32 case also needs shifting an unsigned int, to properly set bit
31, otherwise we get "UBSAN: shift-out-of-bounds in fbcon_set_font",
as reported on:
Linus Torvalds [Fri, 3 Feb 2023 19:35:42 +0000 (11:35 -0800)]
Merge tag 'block-6.2-2023-02-03' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"A bit bigger than I'd like at this point, but mostly a bunch of little
fixes. In detail:
- NVMe pull request via Christoph:
- Fix a missing queue put in nvmet_fc_ls_create_association
(Amit Engel)
- Clear queue pointers on tag_set initialization failure
(Maurizio Lombardi)
- Use workqueue dedicated to authentication (Shin'ichiro
Kawasaki)
- Fix for an overflow in ublk (Liu)
- Fix for leaking a queue reference in block cgroups (Ming)
- Fix for a use-after-free in BFQ (Yu)"
* tag 'block-6.2-2023-02-03' of git://git.kernel.dk/linux:
blk-cgroup: don't update io stat for root cgroup
nvme-auth: use workqueue dedicated to authentication
nvme: clear the request_queue pointers on failure in nvme_alloc_io_tag_set
nvme: clear the request_queue pointers on failure in nvme_alloc_admin_tag_set
nvme-fc: fix a missing queue put in nvmet_fc_ls_create_association
block: Fix the blk_mq_destroy_queue() documentation
block: ublk: extending queue_size to fix overflow
block, bfq: fix uaf for bfqq in bic_set_bfqq()
Linus Torvalds [Fri, 3 Feb 2023 18:34:07 +0000 (10:34 -0800)]
Merge tag 'ceph-for-6.2-rc7' of https://github.com/ceph/ceph-client
Pull ceph fix from Ilya Dryomov:
"A safeguard to prevent the kernel client from further damaging the
filesystem after running into a case of an invalid snap trace.
The root cause of this metadata corruption is still being investigated
but it appears to be stemming from the MDS. As such, this is the best
we can do for now"
* tag 'ceph-for-6.2-rc7' of https://github.com/ceph/ceph-client:
ceph: blocklist the kclient when receiving corrupted snap trace
ceph: move mount state enum to super.h
Linus Torvalds [Fri, 3 Feb 2023 18:25:41 +0000 (10:25 -0800)]
Merge tag 'efi-fixes-for-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- handle potential mremap() failure gracefully
- don't reject EFI memory attributes table version 2
* tag 'efi-fixes-for-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: fix potential NULL deref in efi_mem_reserve_persistent
efi: Accept version 2 of memory attributes table
Linus Torvalds [Fri, 3 Feb 2023 18:18:39 +0000 (10:18 -0800)]
Merge tag 'riscv-for-linus-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A build fix to avoid static branches in cpu_relax(), which greatly
inflates the jump tables and breaks at least
CONFIG_CC_OPTIMIZE_FOR_SIZE=y.
- A fix for a kernel panic when probing impossible instruction
positions.
- A fix to disable unwind tables, which are enabled by default for
GCC-13 and result in unhandled relocations in modules.
* tag 'riscv-for-linus-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: disable generation of unwind tables
riscv: kprobe: Fixup kernel panic when probing an illegal position
riscv: Fix build with CONFIG_CC_OPTIMIZE_FOR_SIZE=y
Linus Torvalds [Fri, 3 Feb 2023 18:09:55 +0000 (10:09 -0800)]
Merge tag 'drm-fixes-2023-02-03' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"A few more fixes this week, a bit more spread out though.
We have a bunch of nouveau regression and stabilisation fixes, along
with usual amdgpu, and i915. Otherwise just some minor misc ones:
dma-fence:
- fix signaling bit for private fences
panel:
- boe-tv101wum-nl6 disable fix
nouveau:
- gm20b acr regression fix
- tu102 scrub status fix
- tu102 wait for firmware fix
i915:
- Fixes for potential use-after-free and double-free
- GuC locking and refcount fixes
- Display's reference clock value fix
amdgpu:
- GC11 fixes
- DCN 3.1.4 fixes
- NBIO 4.3 fix
- DCN 3.2 fixes
- Properly handle additional cases where DCN is not supported
- SMU13 fixes
vc4:
- fix CEC adapter names
ssd130x:
- fix display init regression"
* tag 'drm-fixes-2023-02-03' of git://anongit.freedesktop.org/drm/drm: (23 commits)
drm/amd/display: Properly handle additional cases where DCN is not supported
drm/amdgpu: Enable vclk dclk node for gc11.0.3
drm/amd: Fix initialization for nbio 4.3.0
drm/amdgpu: enable HDP SD for gfx 11.0.3
drm/amd/pm: drop unneeded dpm features disablement for SMU 13.0.4/11
drm/amd/display: Reset DMUB mailbox SW state after HW reset
drm/amd/display: Unassign does_plane_fit_in_mall function from dcn3.2
drm/amd/display: Adjust downscaling limits for dcn314
drm/amd/display: Add missing brackets in calculation
drm/amdgpu: update wave data type to 3 for gfx11
drm/panel: boe-tv101wum-nl6: Ensure DSI writes succeed during disable
drm/nouveau/acr/gm20b: regression fixes
drm/nouveau/fb/tu102-: fix register used to determine scrub status
drm/nouveau/devinit/tu102-: wait for GFW_BOOT_PROGRESS == COMPLETED
drm/i915/adlp: Fix typo for reference clock
drm/i915: Fix potential bit_17 double-free
drm/i915: Fix up locking around dumping requests lists
drm/i915: Fix request ref counting during error capture & debugfs dump
drm/i915/guc: Fix locking when searching for a hung request
drm/i915: Avoid potential vm use-after-free
...
Linus Torvalds [Fri, 3 Feb 2023 18:01:57 +0000 (10:01 -0800)]
Merge tag 'mm-hotfixes-stable-2023-02-02-19-24-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"25 hotfixes, mainly for MM. 13 are cc:stable"
* tag 'mm-hotfixes-stable-2023-02-02-19-24-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (26 commits)
mm: memcg: fix NULL pointer in mem_cgroup_track_foreign_dirty_slowpath()
Kconfig.debug: fix the help description in SCHED_DEBUG
mm/swapfile: add cond_resched() in get_swap_pages()
mm: use stack_depot_early_init for kmemleak
Squashfs: fix handling and sanity checking of xattr_ids count
sh: define RUNTIME_DISCARD_EXIT
highmem: round down the address passed to kunmap_flush_on_unmap()
migrate: hugetlb: check for hugetlb shared PMD in node migration
mm: hugetlb: proc: check for hugetlb shared PMD in /proc/PID/smaps
mm/MADV_COLLAPSE: catch !none !huge !bad pmd lookups
Revert "mm: kmemleak: alloc gray object for reserved region with direct map"
freevxfs: Kconfig: fix spelling
maple_tree: should get pivots boundary by type
.mailmap: update e-mail address for Eugen Hristev
mm, mremap: fix mremap() expanding for vma's with vm_ops->close()
squashfs: harden sanity check in squashfs_read_xattr_id_table
ia64: fix build error due to switch case label appearing next to declaration
mm: multi-gen LRU: fix crash during cgroup migration
Revert "mm: add nodes= arg to memory.reclaim"
zsmalloc: fix a race with deferred_handles storing
...
Anton Gusev [Fri, 3 Feb 2023 13:22:13 +0000 (16:22 +0300)]
efi: fix potential NULL deref in efi_mem_reserve_persistent
When iterating on a linked list, a result of memremap is dereferenced
without checking it for NULL.
This patch adds a check that falls back on allocating a new page in
case memremap doesn't succeed.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 18df7577adae ("efi/memreserve: deal with memreserve entries in unmapped memory") Signed-off-by: Anton Gusev <aagusev@ispras.ru>
[ardb: return -ENOMEM instead of breaking out of the loop] Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
kernel/irq/irqdomain.c: fix memory leak with using debugfs_lookup()
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.
HV: hv_balloon: fix memory leak with using debugfs_lookup()
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.
Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Wei Liu <wei.liu@kernel.org> Cc: Dexuan Cui <decui@microsoft.com> Fixes: d180e0a1be6c ("Drivers: hv: Create debugfs file with hyper-v balloon usage information") Cc: stable <stable@kernel.org> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20230202140918.2289522-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Airlie [Fri, 3 Feb 2023 01:57:23 +0000 (11:57 +1000)]
Merge tag 'drm-misc-fixes-2023-02-02' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
A fix for a non-unique CEC adapter name registration in vc4, a
regression breaking the display in ssd130x, a signaling bit issue in
dma-fence, a couple of fixes in nouveau for Turing and Ampere, and a
disable fix for the boe-tv101wum-nl6 panel.
Linus Torvalds [Fri, 3 Feb 2023 00:44:07 +0000 (16:44 -0800)]
Merge tag 'ata-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull libata fix from Damien Le Moal:
"Fix device probe issues with some combination of adapters & devices
that do not report a current link speed, leading to device probe
failures if a link speed was not previously reported and saved (me)"
* tag 'ata-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata: Fix sata_down_spd_limit() when no link speed is reported
Mark Brown [Sat, 28 Jan 2023 17:47:50 +0000 (17:47 +0000)]
of/address: Return an error when no valid dma-ranges are found
Commit 7a8b64d17e35 ("of/address: use range parser for of_dma_get_range")
converted the parsing of dma-range properties to use code shared with the
PCI range parser. The intent was to introduce no functional changes however
in the case where we fail to translate the first resource instead of
returning -EINVAL the new code we return 0. Restore the previous behaviour
by returning an error if we find no valid ranges, the original code only
handled the first range but subsequently support for parsing all supplied
ranges was added.
This avoids confusing code using the parsed ranges which doesn't expect to
successfully parse ranges but have only a list terminator returned, this
fixes breakage with so far as I can tell all DMA for on SoC devices on the
Socionext Synquacer platform which has a firmware supplied DT. A bisect
identified the original conversion as triggering the issues there.
Fixes: 7a8b64d17e35 ("of/address: use range parser for of_dma_get_range") Signed-off-by: Mark Brown <broonie@kernel.org> Cc: Luca Di Stefano <luca.distefano@linaro.org> Cc: 993612@bugs.debian.org Cc: stable@kernel.org Link: https://lore.kernel.org/r/20230126-synquacer-boot-v2-1-cb80fd23c4e2@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
This is because multiple devices with the same name 'of-display' are
created on the same bus. Update the code to create numbered device names
for the displays.
Also, fix a node refcounting issue when exiting the boot display loop.
cc: linuxppc-dev@lists.ozlabs.org
References: https://bugzilla.kernel.org/show_bug.cgi?id=216095 Fixes: 52b1b46c39ae ("of: Create platform devices for OF framebuffers") Reported-by: Erhard F. <erhard_f@mailbox.org> Suggested-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Michal Suchanek <msuchanek@suse.de> Link: https://lore.kernel.org/r/20230201162247.3575506-1-robh@kernel.org
[robh: Rework to avoid node refcount leaks] Signed-off-by: Rob Herring <robh@kernel.org>
Linus Torvalds [Thu, 2 Feb 2023 22:03:31 +0000 (14:03 -0800)]
Merge tag 'net-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, can and netfilter.
Current release - regressions:
- phy: fix null-deref in phy_attach_direct
- mac802154: fix possible double free upon parsing error
Previous releases - regressions:
- bpf: preserve reg parent/live fields when copying range info,
prevent mis-verification of programs as safe
- ip6: fix GRE tunnels not generating IPv6 link local addresses
- phy: dp83822: fix null-deref on DP83825/DP83826 devices
- sctp: do not check hb_timer.expires when resetting hb_timer
- eth: mtk_sock: fix SGMII configuration after phylink conversion
Previous releases - always broken:
- eth: xdp: execute xdp_do_flush() before napi_complete_done()
- skb: do not mix page pool and page referenced frags in GRO
- bpf:
- fix a possible task gone issue with bpf_send_signal[_thread]()
- fix an off-by-one bug in bpf_mem_cache_idx() to select the right
cache
- add missing btf_put to register_btf_id_dtor_kfuncs
- sockmap: fon't let sock_map_{close,destroy,unhash} call itself
- gso: fix null-deref in skb_segment_list()
- mctp: purge receive queues on sk destruction
- fix UaF caused by accept on already connected socket in exotic
socket families
- tls: don't treat list head as an entry in tls_is_tx_ready()
- netfilter: br_netfilter: disable sabotage_in hook after first
suppression
- wwan: t7xx: fix runtime PM implementation
Misc:
- MAINTAINERS: spring cleanup of networking maintainers"
* tag 'net-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
mtk_sgmii: enable PCS polling to allow SFP work
net: mediatek: sgmii: fix duplex configuration
net: mediatek: sgmii: ensure the SGMII PHY is powered down on configuration
MAINTAINERS: update SCTP maintainers
MAINTAINERS: ipv6: retire Hideaki Yoshifuji
mailmap: add John Crispin's entry
MAINTAINERS: bonding: move Veaceslav Falico to CREDITS
net: openvswitch: fix flow memory leak in ovs_flow_cmd_new
net: ethernet: mtk_eth_soc: disable hardware DSA untagging for second MAC
virtio-net: Keep stop() to follow mirror sequence of open()
selftests: net: udpgso_bench_tx: Cater for pending datagrams zerocopy benchmarking
selftests: net: udpgso_bench: Fix racing bug between the rx/tx programs
selftests: net: udpgso_bench_rx/tx: Stop when wrong CLI args are provided
selftests: net: udpgso_bench_rx: Fix 'used uninitialized' compiler warning
can: mcp251xfd: mcp251xfd_ring_set_ringparam(): assign missing tx_obj_num_coalesce_irq
can: isotp: split tx timer into transmission and timeout
can: isotp: handle wait_event_interruptible() return values
can: raw: fix CAN FD frame transmissions over CAN XL devices
can: j1939: fix errant WARN_ON_ONCE in j1939_session_deactivate
hv_netvsc: Fix missed pagebuf entries in netvsc_dma_map/unmap()
...
Shiju Jose [Thu, 2 Feb 2023 18:23:09 +0000 (18:23 +0000)]
tracing: Fix poll() and select() do not work on per_cpu trace_pipe and trace_pipe_raw
poll() and select() on per_cpu trace_pipe and trace_pipe_raw do not work
since kernel 6.1-rc6. This issue is seen after the commit 42fb0a1e84ff525ebe560e2baf9451ab69127e2b ("tracing/ring-buffer: Have
polling block on watermark").
This issue is firstly detected and reported, when testing the CXL error
events in the rasdaemon and also erified using the test application for poll()
and select().
This issue occurs for the per_cpu case, when calling the ring_buffer_poll_wait(),
in kernel/trace/ring_buffer.c, with the buffer_percent > 0 and then wait until the
percentage of pages are available. The default value set for the buffer_percent is 50
in the kernel/trace/trace.c.
As a fix, allow userspace application could set buffer_percent as 0 through
the buffer_percent_fops, so that the task will wake up as soon as data is added
to any of the specific cpu buffer.
Link: https://lore.kernel.org/linux-trace-kernel/20230202182309.742-2-shiju.jose@huawei.com Cc: <mhiramat@kernel.org> Cc: <mchehab@kernel.org> Cc: <linux-edac@vger.kernel.org> Cc: stable@vger.kernel.org Fixes: 42fb0a1e84ff5 ("tracing/ring-buffer: Have polling block on watermark") Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Linus Torvalds [Thu, 2 Feb 2023 21:08:18 +0000 (13:08 -0800)]
Merge tag 'linux-kselftest-kunit-fixes-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit fixes from Shuah Khan:
"Three fixes to bugs that cause kernel crash, link error during build,
and a third to fix kunit_test_init_section_suites() extra indirection
issue"
* tag 'linux-kselftest-kunit-fixes-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: fix kunit_test_init_section_suites(...)
kunit: fix bug in KUNIT_EXPECT_MEMEQ
kunit: Export kunit_running()
Linus Torvalds [Thu, 2 Feb 2023 21:02:45 +0000 (13:02 -0800)]
Merge tag 'soc-fixes-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"The majority of bugfixes is once more for the NXP i.MX platform,
addressing issue with i.MX8M (UART, watchdog and ethernet) as well as
imx8dxl power button and the USB modem on an imx7 board.
The reason that i.MX always shows up here is obviously not that they
are more buggy than the others, but they have the most boards and are
good about getting fixes in quickly.
The other DT fixes are for the Nuvoton wpcm450 flash controller and
the i2c mux on an ASpeed board.
Lastly, there are updates to the MAINTAINERS entries for Mediatek,
AMD/Seattle and NXP SoCs, as well as a lone code fix for error
handling in the allwinner 'rsb' bus driver"
* tag 'soc-fixes-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: wpcm450: Add nuvoton,shm = <&shm> to FIU node
MAINTAINERS: Update entry for MediaTek SoC support
MAINTAINERS: amd: drop inactive Brijesh Singh
ARM: dts: imx7d-smegw01: Fix USB host over-current polarity
arm64: dts: imx8mm-verdin: Do not power down eth-phy
MAINTAINERS: match freescale ARM64 DT directory in i.MX entry
arm64: dts: imx8mm: Fix pad control for UART1_DTE_RX
ARM: dts: aspeed: Fix pca9849 compatible
arm64: dts: freescale: imx8dxl: fix sc_pwrkey's property name linux,keycode
arm64: dts: imx8m-venice: Remove incorrect 'uart-has-rtscts'
arm64: dts: imx8mm: Reinstate GPIO watchdog always-running property on eDM SBC
bus: sunxi-rsb: Fix error handling in sunxi_rsb_init()
Linus Torvalds [Thu, 2 Feb 2023 20:52:47 +0000 (12:52 -0800)]
Merge tag 's390-6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- With CONFIG_VMAP_STACK enabled it is not possible to load the s390
specific diag288_wdt watchdog module. The reason is that a pointer to
a string is passed to an inline assembly; this string however is
located on the stack, while the instruction within the inline
assembly expects a physicial address. Fix this by copying the string
to a kmalloc'ed buffer.
- The diag288_wdt watchdog module does not indicate that it accesses
memory from an inline assembly, which it does. Add "memory" to the
clobber list to prevent the compiler from optimizing code incorrectly
away.
- Pass size of the uncompressed kernel image to __decompress() call.
Otherwise the kernel image decompressor may corrupt/overwrite an
initrd. This was reported to happen on s390 after commit 2aa14b1ab2c4
("zstd: import usptream v1.5.2").
* tag 's390-6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/decompressor: specify __decompress() buf len to avoid overflow
watchdog: diag288_wdt: fix __diag288() inline assembly
watchdog: diag288_wdt: do not use stack buffers for hardware data
Linus Torvalds [Thu, 2 Feb 2023 20:47:08 +0000 (12:47 -0800)]
Merge tag 'platform-drivers-x86-v6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"A set of AMD PMF fixes + a few other small fixes"
* tag 'platform-drivers-x86-v6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: touchscreen_dmi: Add Chuwi Vi8 (CWI501) DMI match
platform/x86: thinkpad_acpi: Fix thinklight LED brightness returning 255
platform/x86/amd: pmc: add CONFIG_SERIO dependency
platform/x86/amd/pmf: Ensure mutexes are initialized before use
platform/x86/amd/pmf: Fix to update SPS thermals when power supply change
platform/x86/amd/pmf: Fix to update SPS default pprof thermals
platform/x86/amd/pmf: update to auto-mode limits only after AMT event
platform/x86/amd/pmf: Add helper routine to check pprof is balanced
platform/x86/amd/pmf: Add helper routine to update SPS thermals
Bjørn Mork [Wed, 1 Feb 2023 18:23:30 +0000 (19:23 +0100)]
net: mediatek: sgmii: fix duplex configuration
The logic of the duplex bit is inverted. Setting it means half
duplex, not full duplex.
Fix and rename macro to avoid confusion.
Fixes: 7e538372694b ("net: ethernet: mediatek: Re-add support SGMII") Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Daniel Golle <daniel@makrotopia.org> Tested-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: mediatek: sgmii: ensure the SGMII PHY is powered down on configuration
The code expect the PHY to be in power down which is only true after reset.
Allow changes of the SGMII parameters more than once.
Only power down when reconfiguring to avoid bouncing the link when there's
no reason to - based on code from Russell King.
There are cases when the SGMII_PHYA_PWD register contains 0x9 which
prevents SGMII from working. The SGMII still shows link but no traffic
can flow. Writing 0x0 to the PHYA_PWD register fix the issue. 0x0 was
taken from a good working state of the SGMII interface.
Fixes: 42c03844e93d ("net-next: mediatek: add support for MediaTek MT7622 SoC") Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk> Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
[ bmork: rebased and squashed into one patch ] Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Daniel Golle <daniel@makrotopia.org> Tested-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 2 Feb 2023 19:51:24 +0000 (11:51 -0800)]
Merge tag 'linux-can-fixes-for-6.2-20230202' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
can 2023-02-02
The first patch is by Ziyang Xuan and removes a errant WARN_ON_ONCE()
in the CAN J1939 protocol.
The next 3 patches are by Oliver Hartkopp. The first 2 target the CAN
ISO-TP protocol and fix the state machine with respect to signals and
a regression found by the syzbot.
The last patch is by me an missing assignment during the ethtool ring
configuration callback.
* tag 'linux-can-fixes-for-6.2-20230202' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: mcp251xfd: mcp251xfd_ring_set_ringparam(): assign missing tx_obj_num_coalesce_irq
can: isotp: split tx timer into transmission and timeout
can: isotp: handle wait_event_interruptible() return values
can: raw: fix CAN FD frame transmissions over CAN XL devices
can: j1939: fix errant WARN_ON_ONCE in j1939_session_deactivate
====================
====================
MAINTAINERS: spring refresh of networking maintainers
Use Jon Corbet's script for generating statistics about maintainer
coverage to identify inactive maintainers of relatively active code.
Move them to CREDITS.
====================
Arınç ÜNAL [Sat, 28 Jan 2023 09:42:32 +0000 (12:42 +0300)]
net: ethernet: mtk_eth_soc: disable hardware DSA untagging for second MAC
According to my tests on MT7621AT and MT7623NI SoCs, hardware DSA untagging
won't work on the second MAC. Therefore, disable this feature when the
second MAC of the MT7621 and MT7623 SoCs is being used.
Jens Axboe [Thu, 2 Feb 2023 18:02:12 +0000 (11:02 -0700)]
Merge tag 'nvme-6.2-2023-02-02' of git://git.infradead.org/nvme into block-6.2
Pul NVMe fixes from Christoph:
"nvme fixes for Linux 6.2
- fix a missing queue put in nvmet_fc_ls_create_association (Amit Engel)
- clear queue pointers on tag_set initialization failure
(Maurizio Lombardi)
- use workqueue dedicated to authentication (Shin'ichiro Kawasaki)"
* tag 'nvme-6.2-2023-02-02' of git://git.infradead.org/nvme:
nvme-auth: use workqueue dedicated to authentication
nvme: clear the request_queue pointers on failure in nvme_alloc_io_tag_set
nvme: clear the request_queue pointers on failure in nvme_alloc_admin_tag_set
nvme-fc: fix a missing queue put in nvmet_fc_ls_create_association
Ard Biesheuvel [Thu, 2 Feb 2023 17:30:06 +0000 (18:30 +0100)]
efi: Accept version 2 of memory attributes table
UEFI v2.10 introduces version 2 of the memory attributes table, which
turns the reserved field into a flags field, but is compatible with
version 1 in all other respects. So let's not complain about version 2
if we encounter it.
Xiubo Li [Wed, 1 Feb 2023 01:36:45 +0000 (09:36 +0800)]
ceph: blocklist the kclient when receiving corrupted snap trace
When received corrupted snap trace we don't know what exactly has
happened in MDS side. And we shouldn't continue IOs and metadatas
access to MDS, which may corrupt or get incorrect contents.
This patch will just block all the further IO/MDS requests
immediately and then evict the kclient itself.
The reason why we still need to evict the kclient just after
blocking all the further IOs is that the MDS could revoke the caps
faster.
Andrei Gherzan [Wed, 1 Feb 2023 00:16:16 +0000 (00:16 +0000)]
selftests: net: udpgso_bench_tx: Cater for pending datagrams zerocopy benchmarking
The test tool can check that the zerocopy number of completions value is
valid taking into consideration the number of datagram send calls. This can
catch the system into a state where the datagrams are still in the system
(for example in a qdisk, waiting for the network interface to return a
completion notification, etc).
This change adds a retry logic of computing the number of completions up to
a configurable (via CLI) timeout (default: 2 seconds).
Fixes: 79ebc3c26010 ("net/udpgso_bench_tx: options to exercise TX CMSG") Signed-off-by: Andrei Gherzan <andrei.gherzan@canonical.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20230201001612.515730-4-andrei.gherzan@canonical.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Andrei Gherzan [Wed, 1 Feb 2023 00:16:14 +0000 (00:16 +0000)]
selftests: net: udpgso_bench: Fix racing bug between the rx/tx programs
"udpgro_bench.sh" invokes udpgso_bench_rx/udpgso_bench_tx programs
subsequently and while doing so, there is a chance that the rx one is not
ready to accept socket connections. This racing bug could fail the test
with at least one of the following:
This change addresses this by making udpgro_bench.sh wait for the rx
program to be ready before firing off the tx one - up to a 10s timeout.
Fixes: 3a687bef148d ("selftests: udp gso benchmark") Signed-off-by: Andrei Gherzan <andrei.gherzan@canonical.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Willem de Bruijn <willemb@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20230201001612.515730-3-andrei.gherzan@canonical.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Andrei Gherzan [Wed, 1 Feb 2023 00:16:12 +0000 (00:16 +0000)]
selftests: net: udpgso_bench_rx/tx: Stop when wrong CLI args are provided
Leaving unrecognized arguments buried in the output, can easily hide a
CLI/script typo. Avoid this by exiting when wrong arguments are provided to
the udpgso_bench test programs.
Fixes: 3a687bef148d ("selftests: udp gso benchmark") Signed-off-by: Andrei Gherzan <andrei.gherzan@canonical.com> Cc: Willem de Bruijn <willemb@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20230201001612.515730-2-andrei.gherzan@canonical.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
/usr/include/x86_64-linux-gnu/bits/error.h:40:5: warning: ‘gso_size’ may
be used uninitialized [-Wmaybe-uninitialized]
40 | __error_noreturn (__status, __errnum, __format,
__va_arg_pack ());
|
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
udpgso_bench_rx.c: In function ‘main’:
udpgso_bench_rx.c:253:23: note: ‘gso_size’ was declared here
253 | int ret, len, gso_size, budget = 256;
Damien Le Moal [Mon, 30 Jan 2023 03:27:41 +0000 (12:27 +0900)]
ata: libata: Fix sata_down_spd_limit() when no link speed is reported
Commit 2dc0b46b5ea3 ("libata: sata_down_spd_limit should return if
driver has not recorded sstatus speed") changed the behavior of
sata_down_spd_limit() to return doing nothing if a drive does not report
a current link speed, to avoid reducing the link speed to the lowest 1.5
Gbps speed.
However, the change assumed that a speed was recorded before probing
(e.g. before a suspend/resume) and set in link->sata_spd. This causes
problems with adapters/drives combination failing to establish a link
speed during probe autonegotiation. One example reported of this problem
is an mvebu adapter with a 3Gbps port-multiplier box: autonegotiation
fails, leaving no recorded link speed and no reported current link
speed. Probe retries also fail as no action is taken by sata_set_spd()
after each retry.
Fix this by returning early in sata_down_spd_limit() only if we do have
a recorded link speed, that is, if link->sata_spd is not 0. With this
fix, a failed probe not leading to a recorded link speed is retried at
the lower 1.5 Gbps speed, with the link speed potentially increased
later on the second revalidate of the device if the device reports
that it supports higher link speeds.
Reported-by: Marius Dinu <marius@psihoexpert.ro> Fixes: 2dc0b46b5ea3 ("libata: sata_down_spd_limit should return if driver has not recorded sstatus speed") Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com> Tested-by: Marius Dinu <marius@psihoexpert.ro> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
If the a new ring layout is set, the max coalesced frames for RX and
TX are re-calculated, too. Add the missing assignment of the newly
calculated TX max coalesced frames.
Oliver Hartkopp [Wed, 4 Jan 2023 14:57:01 +0000 (15:57 +0100)]
can: isotp: split tx timer into transmission and timeout
The timer for the transmission of isotp PDUs formerly had two functions:
1. send two consecutive frames with a given time gap
2. monitor the timeouts for flow control frames and the echo frames
This led to larger txstate checks and potentially to a problem discovered
by syzbot which enabled the panic_on_warn feature while testing.
The former 'txtimer' function is split into 'txfrtimer' and 'txtimer'
to handle the two above functionalities with separate timer callbacks.
The two simplified timers now run in one-shot mode and make the state
transitions (especially with isotp_rcv_echo) better understandable.
Fixes: 866337865f37 ("can: isotp: fix tx state handling for echo tx processing") Reported-by: syzbot+5aed6c3aaba661f5b917@syzkaller.appspotmail.com Cc: stable@vger.kernel.org # >= v6.0 Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20230104145701.2422-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
When wait_event_interruptible() has been interrupted by a signal the
tx.state value might not be ISOTP_IDLE. Force the state machines
into idle state to inhibit the timer handlers to continue working.
Fixes: 866337865f37 ("can: isotp: fix tx state handling for echo tx processing") Cc: stable@vger.kernel.org Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20230112192347.1944-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Oliver Hartkopp [Tue, 31 Jan 2023 10:56:13 +0000 (11:56 +0100)]
can: raw: fix CAN FD frame transmissions over CAN XL devices
A CAN XL device is always capable to process CAN FD frames. The former
check when sending CAN FD frames relied on the existence of a CAN FD
device and did not check for a CAN XL device that would be correct
too.
With this patch the CAN FD feature is enabled automatically when CAN
XL is switched on - and CAN FD cannot be switch off while CAN XL is
enabled.
This precondition also leads to a clean up and reduction of checks in
the hot path in raw_rcv() and raw_sendmsg(). Some conditions are
reordered to handle simple checks first.
changes since v1: https://lore.kernel.org/all/20230131091012.50553-1-socketcan@hartkopp.net
- fixed typo: devive -> device
changes since v2: https://lore.kernel.org/all/20230131091824.51026-1-socketcan@hartkopp.net/
- reorder checks in if statements to handle simple checks first
Ziyang Xuan [Mon, 6 Sep 2021 09:42:00 +0000 (17:42 +0800)]
can: j1939: fix errant WARN_ON_ONCE in j1939_session_deactivate
The conclusion "j1939_session_deactivate() should be called with a
session ref-count of at least 2" is incorrect. In some concurrent
scenarios, j1939_session_deactivate can be called with the session
ref-count less than 2. But there is not any problem because it
will check the session active state before session putting in
j1939_session_deactivate_locked().
Here is the concurrent scenario of the problem reported by syzbot
and my reproduction log.
Aaro Koskinen [Wed, 1 Feb 2023 22:01:25 +0000 (00:01 +0200)]
usb: gadget: udc: do not clear gadget driver.bus
Before the commit fc274c1e9973 ("USB: gadget: Add a new bus for gadgets")
gadget driver.bus was unused. For whatever reason, many UDC drivers set
this field explicitly to NULL in udc_start(). With the newly added gadget
bus, doing this will crash the driver during the attach.
The problem was first reported, fixed and tested with OMAP UDC and g_ether.
Other drivers are changed based on code analysis only.
Fixes: fc274c1e9973 ("USB: gadget: Add a new bus for gadgets") Cc: stable <stable@kernel.org> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20230201220125.GD2415@darkstar.musicnaut.iki.fi Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Kelley [Tue, 31 Jan 2023 03:33:06 +0000 (19:33 -0800)]
hv_netvsc: Fix missed pagebuf entries in netvsc_dma_map/unmap()
netvsc_dma_map() and netvsc_dma_unmap() currently check the cp_partial
flag and adjust the page_count so that pagebuf entries for the RNDIS
portion of the message are skipped when it has already been copied into
a send buffer. But this adjustment has already been made by code in
netvsc_send(). The duplicate adjustment causes some pagebuf entries to
not be mapped. In a normal VM, this doesn't break anything because the
mapping doesn’t change the PFN. But in a Confidential VM,
dma_map_single() does bounce buffering and provides a different PFN.
Failing to do the mapping causes the wrong PFN to be passed to Hyper-V,
and various errors ensue.
Fix this by removing the duplicate adjustment in netvsc_dma_map() and
netvsc_dma_unmap().
Fixes: 846da38de0e8 ("net: netvsc: Add Isolation VM support for netvsc driver") Cc: stable@vger.kernel.org Signed-off-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Link: https://lore.kernel.org/r/1675135986-254490-1-git-send-email-mikelley@microsoft.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tom Rix [Tue, 31 Jan 2023 21:54:37 +0000 (13:54 -0800)]
igc: return an error if the mac type is unknown in igc_ptp_systim_to_hwtstamp()
clang static analysis reports
drivers/net/ethernet/intel/igc/igc_ptp.c:673:3: warning: The left operand of
'+' is a garbage value [core.UndefinedBinaryOperatorResult]
ktime_add_ns(shhwtstamps.hwtstamp, adjust);
^ ~~~~~~~~~~~~~~~~~~~~
igc_ptp_systim_to_hwtstamp() silently returns without setting the hwtstamp
if the mac type is unknown. This should be treated as an error.
Fixes: 81b055205e8b ("igc: Add support for RX timestamping") Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230131215437.1528994-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andreas Schwab [Wed, 1 Feb 2023 09:29:45 +0000 (10:29 +0100)]
riscv: disable generation of unwind tables
GCC 13 will enable -fasynchronous-unwind-tables by default on riscv. In
the kernel, we don't have any use for unwind tables yet, so disable them.
More importantly, the .eh_frame section brings relocations
(R_RISC_32_PCREL, R_RISCV_SET{6,8,16}, R_RISCV_SUB{6,8,16}) into modules
that we are not prepared to handle.
Kernel panic - not syncing: stack-protector: Kernel stack
is corrupted in: __do_sys_newfstatat+0xb8/0xb8
CPU: 0 PID: 111 Comm: sh Not tainted 6.2.0-rc1-00027-g2d398fe49a4d #490
Hardware name: riscv-virtio,qemu (DT)
Call Trace:
[<ffffffff80007268>] dump_backtrace+0x38/0x48
[<ffffffff80c5e83c>] show_stack+0x50/0x68
[<ffffffff80c6da28>] dump_stack_lvl+0x60/0x84
[<ffffffff80c6da6c>] dump_stack+0x20/0x30
[<ffffffff80c5ecf4>] panic+0x160/0x374
[<ffffffff80c6db94>] generic_handle_arch_irq+0x0/0xa8
[<ffffffff802deeb0>] sys_newstat+0x0/0x30
[<ffffffff800158c0>] sys_clone+0x20/0x30
[<ffffffff800039e8>] ret_from_syscall+0x0/0x4
---[ end Kernel panic - not syncing: stack-protector:
Kernel stack is corrupted in: __do_sys_newfstatat+0xb8/0xb8 ]---
That is because the kprobe's ebreak instruction broke the kernel's
original code. The user should guarantee the correction of the probe
position, but it couldn't make the kernel panic.
This patch adds arch_check_kprobe in arch_prepare_kprobe to prevent an
illegal position (Such as the middle of an instruction).
Yanguo Li [Tue, 31 Jan 2023 08:03:13 +0000 (09:03 +0100)]
nfp: flower: avoid taking mutex in atomic context
A mutex may sleep, which is not permitted in atomic context.
Avoid a case where this may arise by moving the to
nfp_flower_lag_get_info_from_netdev() in nfp_tun_write_neigh() spinlock.
Fixes: abc210952af7 ("nfp: flower: tunnel neigh support bond offload") Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Yanguo Li <yanguo.li@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230131080313.2076060-1-simon.horman@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
ip/ip6_gre: Fix GRE tunnels not generating IPv6 link local addresses
For our point-to-point GRE tunnels, they have IN6_ADDR_GEN_MODE_NONE
when they are created then we set IN6_ADDR_GEN_MODE_EUI64 when they
come up to generate the IPv6 link local address for the interface.
Recently we found that they were no longer generating IPv6 addresses.
Also, non-point-to-point tunnels were not generating any IPv6 link
local address and instead generating an IPv6 compat address,
breaking IPv6 communication on the tunnel.
These failures were caused by commit e5dd729460ca and this patch set
aims to resolve these issues.
====================
Thomas Winter [Tue, 31 Jan 2023 03:46:46 +0000 (16:46 +1300)]
ip/ip6_gre: Fix non-point-to-point tunnel not generating IPv6 link local address
We recently found that our non-point-to-point tunnels were not
generating any IPv6 link local address and instead generating an
IPv6 compat address, breaking IPv6 communication on the tunnel.
Previously, addrconf_gre_config always would call addrconf_addr_gen
and generate a EUI64 link local address for the tunnel.
Then commit e5dd729460ca changed the code path so that add_v4_addrs
is called but this only generates a compat IPv6 address for
non-point-to-point tunnels.
I assume the compat address is specifically for SIT tunnels so
have kept that only for SIT - GRE tunnels now always generate link
local addresses.
Fixes: e5dd729460ca ("ip/ip6_gre: use the same logic as SIT interfaces when computing v6LL address") Signed-off-by: Thomas Winter <Thomas.Winter@alliedtelesis.co.nz> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Thomas Winter [Tue, 31 Jan 2023 03:46:45 +0000 (16:46 +1300)]
ip/ip6_gre: Fix changing addr gen mode not generating IPv6 link local address
For our point-to-point GRE tunnels, they have IN6_ADDR_GEN_MODE_NONE
when they are created then we set IN6_ADDR_GEN_MODE_EUI64 when they
come up to generate the IPv6 link local address for the interface.
Recently we found that they were no longer generating IPv6 addresses.
This issue would also have affected SIT tunnels.
Commit e5dd729460ca changed the code path so that GRE tunnels
generate an IPv6 address based on the tunnel source address.
It also changed the code path so GRE tunnels don't call addrconf_addr_gen
in addrconf_dev_config which is called by addrconf_sysctl_addr_gen_mode
when the IN6_ADDR_GEN_MODE is changed.
This patch aims to fix this issue by moving the code in addrconf_notify
which calls the addr gen for GRE and SIT into a separate function
and calling it in the places that expect the IPv6 address to be
generated.
The previous addrconf_dev_config is renamed to addrconf_eth_config
since it only expected eth type interfaces and follows the
addrconf_gre/sit_config format.
A part of this changes means that the loopback address will be
attempted to be configured when changing addr_gen_mode for lo.
This should not be a problem because the address should exist anyway
and if does already exist then no error is produced.
Fixes: e5dd729460ca ("ip/ip6_gre: use the same logic as SIT interfaces when computing v6LL address") Signed-off-by: Thomas Winter <Thomas.Winter@alliedtelesis.co.nz> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Deucher [Wed, 25 Jan 2023 19:35:16 +0000 (14:35 -0500)]
drm/amd/display: Properly handle additional cases where DCN is not supported
There could be boards with DCN listed in IP discovery, but no
display hardware actually wired up. In this case the vbios
display table will not be populated. Detect this case and
skip loading DM when we detect it.
v2: Mark DCN as harvested as well so other display checks
elsewhere in the driver are handled properly.
drm/amd/display: Reset DMUB mailbox SW state after HW reset
[Why]
Otherwise we can be out of sync with what's in the hardware, leading
to us rerunning every command that's presently in the ringbuffer.
[How]
Reset software state for the mailboxes in hw_reset callback.
This is already done as part of the mailbox init in hw_init, but we
do need to remember to reset the last cached wptr value as well here.
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
George Shen [Thu, 19 Jan 2023 22:09:54 +0000 (17:09 -0500)]
drm/amd/display: Unassign does_plane_fit_in_mall function from dcn3.2
[Why]
The hwss function does_plane_fit_in_mall not applicable to dcn3.2 asics.
Using it with dcn3.2 can result in undefined behaviour.
[How]
Assign the function pointer to NULL.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Daniel Miess [Tue, 17 Jan 2023 20:45:30 +0000 (15:45 -0500)]
drm/amd/display: Adjust downscaling limits for dcn314
[Why]
Lower max_downscale_ratio and ARGB888 downscale factor
to prevent cases where underflow may occur on dcn314
[How]
Set max_downscale_ratio to 400 and ARGB downscale factor
to 250 for dcn314
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Daniel Miess <Daniel.Miess@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Daniel Miess [Tue, 17 Jan 2023 20:34:35 +0000 (15:34 -0500)]
drm/amd/display: Add missing brackets in calculation
[Why]
Brackets missing in the calculation for MIN_DST_Y_NEXT_START
[How]
Add missing brackets for this calculation
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Daniel Miess <Daniel.Miess@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>