target/sparc: Use i128 for FsTOq, FiTOq

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20231103173841.33651-12-richard.henderson@linaro.org>

target/sparc: Use i128 for FCMPq, FCMPEq

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20231103173841.33651-11-richard.henderson@linaro.org>

target/sparc: Use i128 for FqTOd, FqTOx

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20231103173841.33651-10-richard.henderson@linaro.org>

target/sparc: Use i128 for FqTOs, FqTOi

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20231103173841.33651-9-richard.henderson@linaro.org>

target/sparc: Use i128 for FADDq, FSUBq, FMULq, FDIVq

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20231103173841.33651-8-richard.henderson@linaro.org>

target/sparc: Use i128 for FSQRTq

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20231103173841.33651-7-richard.henderson@linaro.org>

target/sparc: Inline FNEG, FABS

These are simple bit manipulation insns.
Begin using i128 for float128.
Implement FMOVq with do_qq.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20231103173841.33651-6-richard.henderson@linaro.org>

target/sparc: Introduce gen_{load,store}_fpr_Q

Use them for trans_FMOVq.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20231103173841.33651-5-richard.henderson@linaro.org>

target/sparc: Remove gen_dest_fpr_F

Replace with tcg_temp_new_i32.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20231103173841.33651-4-richard.henderson@linaro.org>

target/sparc: Use tcg_gen_qemu_{ld, st}_i128 for ASI_M_BFILL

Align the operation to the 32-byte cacheline.
Use 2 i128 instead of 4 i64.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20231103173841.33651-3-richard.henderson@linaro.org>

target/sparc: Use tcg_gen_qemu_{ld, st}_i128 for ASI_M_BCOPY

Align the operation to the 32-byte cacheline.
Use 2 pair of i128 instead of 8 pair of i32.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20231103173841.33651-2-richard.henderson@linaro.org>

tcg/loongarch64: Set vector registers call clobbered

Because there are more call clobbered registers than
call saved registers, we begin with all registers as
call clobbered and then reset those that are saved.

This was missed when we introduced the LSX support.

Cc: qemu-stable@nongnu.org
Fixes: 16288ded944 ("tcg/loongarch64: Lower basic tcg vec ops to LSX")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2136
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240201233414.500588-1-richard.henderson@linaro.org>

tests/tcg: Fix the /proc/self/mem probing in the PROT_NONE gdbstub test

The `if not probe_proc_self_mem` check never passes, because
probe_proc_self_mem is a function object, which is a truthy value.
Add parentheses in order to perform a function call.

Fixes: dc84d50a7f9b ("tests/tcg: Add the PROT_NONE gdbstub test")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240131220245.235993-1-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

include/exec: Change cpu_mmu_index argument to CPUState

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

include/exec: Implement cpu_mmu_index generically

For user-only mode, use MMU_USER_IDX.
For system mode, use CPUClass.mmu_index.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/xtensa: Populate CPUClass.mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/tricore: Populate CPUClass.mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/sparc: Populate CPUClass.mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/sh4: Populate CPUClass.mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/s390x: Populate CPUClass.mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/s390x: Split out s390x_env_mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/rx: Populate CPUClass.mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/riscv: Populate CPUClass.mmu_index

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/riscv: Replace cpu_mmu_index with riscv_env_mmu_index

Use the target-specific function name in preference
to the generic name.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/riscv: Rename riscv_cpu_mmu_index to riscv_env_mmu_index

Free up the riscv_cpu_mmu_index name for other usage;
emphasize that the argument is 'env'.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/ppc: Populate CPUClass.mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/ppc: Split out ppc_env_mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/openrisc: Populate CPUClass.mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/nios2: Populate CPUClass.mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/mips: Populate CPUClass.mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/mips: Split out mips_env_mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/mips: Pass ptw_mmu_idx down from mips_cpu_tlb_fill

Rather than adjust env->hflags so that the value computed
by cpu_mmu_index() changes, compute the mmu_idx that we
want directly and pass it down.

Introduce symbolic constants for MMU_{KERNEL,ERL}_IDX.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/microblaze: Populate CPUClass.mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/m68k: Populate CPUClass.mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/loongarch: Rename MMU_IDX_*

The expected form is MMU_FOO_IDX, not MMU_IDX_FOO.
Rename to match generic code.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/loongarch: Populate CPUClass.mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/i386: Populate CPUClass.mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/hppa: Populate CPUClass.mmu_index

Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/cris: Populate CPUClass.mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/cris: Cache mem_index in DisasContext

Compute this value once for each translation.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/avr: Populate CPUClass.mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/arm: Populate CPUClass.mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/arm: Split out arm_env_mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/alpha: Populate CPUClass.mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/alpha: Split out alpha_env_mmu_index

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

include/hw/core: Add mmu_index to CPUClass

To be used after all targets have populated the hook.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge tag 'pull-nic-config-2-20240202' of git://git.infradead.org/users/dwmw2/qemu into staging

Rework matching of network devices to -nic options (v2)

# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEEMUsIrNDeSBEzpfKGm+mA/QrAFUQFAmW9F9oSHGR3bXdAYW1h
# em9uLmNvLnVrAAoJEJvpgP0KwBVEVwsQAIIDTYb3R/vxpf6w9n+n6FWCbFt/ihPC
# RbQ/Zrnoj6K3dCj6U3zJDpa5qpJ27/AiFfVv/gU13d+ELf72uHKE50GkQa2r/Fl8
# cPoW1LRinGFGxQS+WY5OnRYJ2mBaVx6THUd5DCgb5wpkBgVe21XsZLr6pfAapNCG
# c22HBaIb8sHPeIV2wf1xZKEswNGlkXuylBnS4wayncRKa2vOYPAAO7P4PvwNuMnb
# j0pLyLfD6Zx+6D53ema4zpcDh7d1Qn5eDGHQmy55Ml5AleC05gsDzrCEeiT4vU9T
# 9fj6w8NlyLkPYLqTodAEeaUpUCFhMO312VPSM163iYOUDtjqz10bBZncgbRrsR5I
# 30bKqQvEQ8PAQZWILNhfyHrYw4/O2Y88sUf/lE8lGmHvVYda+yqq5lgEyPFHbJwh
# ZCEJQalc6tRATIWUqI/Lw+X7hqnJ29c14hkEVG8L0KW0fIB/cqXUStzcUt87VkA2
# wwQI4aAGWZE1pvFvhmeM2rTDXfg1uD8SoFDTj4ORJl/7PEemf1yraKUYb8YdRE0z
# dQWfLmSnl1JkTa0yVF5MtnoTJUP8PX+hhJROfdwvfd1sU5s98O5pivYf7arUybVl
# j4g4qwm8IUBiAznZzbhdp38Q91RFvBKjjLsx/+Ts9avZTL0xCUcCvt21wzqWhbkc
# X7KdrU/XxVry
# =4PuR
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 02 Feb 2024 16:27:06 GMT
# gpg:                using RSA key 314B08ACD0DE481133A5F2869BE980FD0AC01544
# gpg:                issuer "dwmw@amazon.co.uk"
# gpg: Good signature from "David Woodhouse <dwmw@amazon.co.uk>" [unknown]
# gpg:                 aka "David Woodhouse <dwmw@amazon.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 314B 08AC D0DE 4811 33A5  F286 9BE9 80FD 0AC0 1544

* tag 'pull-nic-config-2-20240202' of git://git.infradead.org/users/dwmw2/qemu: (47 commits)
  net: make nb_nics and nd_table[] static in net/net.c
  net: remove qemu_show_nic_models(), qemu_find_nic_model()
  hw/pci: remove pci_nic_init_nofail()
  net: remove qemu_check_nic_model()
  hw/xtensa/xtfpga: use qemu_create_nic_device()
  hw/sparc/sun4m: use qemu_find_nic_info()
  hw/s390x/s390-virtio-ccw: use qemu_create_nic_device()
  hw/riscv: use qemu_configure_nic_device()
  hw/openrisc/openrisc_sim: use qemu_create_nic_device()
  hw/net/lasi_i82596: use qemu_create_nic_device()
  hw/net/lasi_i82596: Re-enable build
  hw/mips/jazz: use qemu_find_nic_info()
  hw/mips/mipssim: use qemu_create_nic_device()
  hw/microblaze: use qemu_configure_nic_device()
  hw/m68k/q800: use qemu_find_nic_info()
  hw/m68k/mcf5208: use qemu_create_nic_device()
  hw/net/etraxfs-eth: use qemu_configure_nic_device()
  hw/arm: use qemu_configure_nic_device()
  hw/arm/stellaris: use qemu_find_nic_info()
  hw/arm/npcm7xx: use qemu_configure_nic_device, allow emc0/emc1 as aliases
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

net: make nb_nics and nd_table[] static in net/net.c

Also remove the stale declaration of host_net_devices; the actual
definition was removed long ago in commit 7cc28cb06104 ("net: Remove
the deprecated 'host_net_add' and 'host_net_remove' HMP commands")

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

net: remove qemu_show_nic_models(), qemu_find_nic_model()

These old functions can be removed now too. Let net_param_nic() print
the full set of network devices directly, and also make it note that a
list more specific to this platform/config will be available by using
'-nic model=help' instead.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/pci: remove pci_nic_init_nofail()

This function is no longer used, as all its callers have been converted
to use pci_init_nic_devices() instead.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

net: remove qemu_check_nic_model()

There are no callers of this function any more, as they have all been
converted to qemu_{create,configure}_nic_device().

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/xtensa/xtfpga: use qemu_create_nic_device()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/sparc/sun4m: use qemu_find_nic_info()

Obtain the MAC address from the NIC configuration if there is one, or
generate one explicitly so that it can be placed in the PROM.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/s390x/s390-virtio-ccw: use qemu_create_nic_device()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Thomas Huth <thuth@redhat.com>

hw/riscv: use qemu_configure_nic_device()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/openrisc/openrisc_sim: use qemu_create_nic_device()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/net/lasi_i82596: use qemu_create_nic_device()

Create the device only if there is a corresponding NIC config for it.
Remove the explicit check on nd_table[0].used from hw/hppa/machine.c
which (since commit d8a3220005d7) tries to do the same thing.

The lasi_82596 support has been disabled since it was first introduced,
since enable_lasi_lan() has always been zero. This allows the user to
enable it by explicitly requesting a NIC model 'lasi_82596' or just
using the alias 'lasi'. Otherwise, it defaults to a PCI NIC as before.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/net/lasi_i82596: Re-enable build

When converting to the shiny build-system-du-jour, a typo prevented the
last_i82596 driver from being built. Correct the config option name to
re-enable the build. And include "sysemu/sysemu.h" so it actually builds.

Fixes: b1419fa66558 ("meson: convert hw/net")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2144
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/mips/jazz: use qemu_find_nic_info()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/mips/mipssim: use qemu_create_nic_device()

The MIPS SIM platform instantiates its NIC only if a corresponding
configuration exists for it. Use qemu_create_nic_device() function for
that.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/microblaze: use qemu_configure_nic_device()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/m68k/q800: use qemu_find_nic_info()

If a corresponding NIC configuration was found, it will have a MAC address
already assigned, so use that. Else, generate and assign a default one.

Using qemu_find_nic_info() is simpler than the alternative of using
qemu_configure_nic_device() and then having to fetch the "mac" property
as a string and convert it.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/m68k/mcf5208: use qemu_create_nic_device()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/net/etraxfs-eth: use qemu_configure_nic_device()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/arm: use qemu_configure_nic_device()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/arm/stellaris: use qemu_find_nic_info()

Rather than just using qemu_configure_nic_device(), populate the MAC
address in the system-registers device by peeking at the NICInfo before
it's assigned to the device.

Generate the MAC address early, if there is no matching -nic option.
Otherwise the MAC address wouldn't be generated until net_client_init1()
runs.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/arm/npcm7xx: use qemu_configure_nic_device, allow emc0/emc1 as aliases

Also update the test to specify which device to attach the test socket
to, and remove the comment lamenting the fact that we can't do so.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/arm/highbank: use qemu_create_nic_device()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/net/lan9118: use qemu_configure_nic_device()

Some callers instantiate the device unconditionally, others will do so only
if there is a NICInfo to go with it. This appears to be fairly random, but
preseve the existing behaviour for now.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/net/smc91c111: use qemu_configure_nic_device()

Some callers instantiate the device unconditionally, others will do so only
if there is a NICInfo to go with it. This appears to be fairly random, but
preserve the existing behaviour of each caller for now.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/arm/fsl: use qemu_configure_nic_device()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/arm/exynos4: use qemu_create_nic_device()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/arm/aspeed: use qemu_configure_nic_device()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>

hw/arm/allwinner: use qemu_configure_nic_device()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/xtensa/virt: use pci_init_nic_devices()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/sparc64/sun4u: use pci_init_nic_devices()

The first sunhme NIC gets placed a function 1 on slot 1 of PCI bus A,
and the rest are dynamically assigned on PCI bus B.

Previously, any PCI NIC would get the special treatment purely by
virtue of being first in the list.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/sh4/r2d: use pci_init_nic_devices()

Previously, the first PCI NIC would be assigned to slot 2 even if the
user override the model and made it something other than an rtl8139
which is the default. Everything else would be dynamically assigned.

Now, the first rtl8139 gets slot 2 and everything else is dynamic.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>

hw/ppc: use pci_init_nic_devices()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/ppc/spapr: use qemu_get_nic_info() and pci_init_nic_devices()

Avoid directly referencing nd_table[] by first instantiating any
spapr-vlan devices using a qemu_get_nic_info() loop, then calling
pci_init_nic_devices() to do the rest.

No functional change intended.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/ppc/prep: use pci_init_nic_devices()

Previously, the first PCI NIC would be placed in PCI slot 3 and the rest
would be dynamically assigned. Even if the user overrode the default NIC
type and made it something other than PCNet.

Now, the first PCNet NIC (that is, anything not explicitly specified
to be anything different) will go to slot 3 even if it isn't the first
NIC specified on the command line. And anything else will be dynamically
assigned.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/mips/loongson3_virt: use pci_init_nic_devices()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/mips/malta: use pci_init_nic_devices()

The Malta board setup code would previously place the first NIC into PCI
slot 11 if was a PCNet card, and the rest (including the first if it was
anything other than a PCNet card) would be dynamically assigned.

Now it will place any PCNet NIC into slot 11, and then anything else will
be dynamically assigned.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/mips/fuloong2e: use pci_init_nic_devices()

The previous behaviour was: *if* the first NIC specified on the command
line was an RTL8139 (or unspecified model) then it gets assigned to PCI
slot 7, which is where the Fuloong board had an RTL8139. All other
devices (including the first, if it was specified as anything other than
an rtl8319) get dynamically assigned on the bus.

The new behaviour is subtly different: If the first NIC was given a
specific model *other* than rtl8139, and a subsequent NIC was not,
then the rtl8139 (or unspecified) NIC will go to slot 7 and the rest
will be dynamically assigned.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/loongarch: use pci_init_nic_devices()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Song Gao <gaosong@loongson.cn>

hw/hppa: use pci_init_nic_devices()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/arm/virt: use pci_init_nic_devices()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/arm/sbsa-ref: use pci_init_nic_devices()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>

hw/alpha/dp264: use pci_init_nic_devices()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>

hw/xen: use qemu_create_nic_bus_devices() to instantiate Xen NICs

When instantiating XenBus itself, for each NIC which is configured with
either the model unspecified, or set to to "xen" or "xen-net-device",
create a corresponding xen-net-device for it.

Now we can revert the previous more hackish version which relied on the
platform code explicitly registering the NICs on its own XenBus, having
returned the BusState* from xen_bus_init() itself.

This also fixes the setup for Xen PV guests, which was previously broken
in various ways and never actually managed to peer with the netdev.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>

hw/i386/pc: use qemu_get_nic_info() and pci_init_nic_devices()

Eliminate direct access to nd_table[] and nb_nics by processing the the
Xen and ISA NICs first and then calling pci_init_nic_devices() for the
rest.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>

hw/pci: add pci_init_nic_devices(), pci_init_nic_in_slot()

The loop over nd_table[] to add PCI NICs is repeated in quite a few
places. Add a helper function to do it.

Some platforms also try to instantiate a specific model in a specific
slot, to match the real hardware. Add pci_init_nic_in_slot() for that
purpose.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>

net: add qemu_create_nic_bus_devices()

This will instantiate any NICs which live on a given bus type. Each bus
is allowed *one* substitution (for PCI it's virtio → virtio-net-pci, for
Xen it's xen → xen-net-device; no point in overengineering it unless we
actually want more).

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>

net: report list of available models according to platform

By noting the models for which a configuration was requested, we can give
the user an accurate list of which NIC models were actually available on
the platform/configuration that was otherwise chosen.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>

net: add qemu_{configure,create}_nic_device(), qemu_find_nic_info()

Most code which directly accesses nd_table[] and nb_nics uses them for
one of two things. Either "I have created a NIC device and I'd like a
configuration for it", or "I will create a NIC device *if* there is a
configuration for it".  With some variants on the theme around whether
they actually *check* if the model specified in the configuration is
the right one.

Provide functions which perform both of those, allowing platforms to
be a little more consistent and as a step towards making nd_table[]
and nb_nics private to the net code.

One might argue that platforms ought to be consistent about whether
they create the unconfigured devices or not, but making significant
user-visible changes is explicitly *not* the intent right now.

The new functions leave the 'model' field of the NICInfo as NULL after
using it for the default NIC model, unlike the qemu_check_nic_model()
function which does set nd->model to match default_model explicitly.
This is acceptable because there is no code which consumes nd->model
except this NIC-matching code in net/net.c, and no reasonable excuse
for any code wanting to use nd->model in future.

Also export the qemu_find_nic_info() helper, as some platforms have
special cases they need to handle.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>

Merge tag 'pull-aspeed-20240201' of https://github.com/legoater/qemu into staging

aspeed queue:

* Update of buildroot images to 2023.11 (6.6.3 kernel)
* Check of the valid CPU type supported by aspeed machines
* Simplified models for the IBM's FSI bus and the Aspeed
  controller bridge

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmW7Sa8ACgkQUaNDx8/7
# 7KG7mw/8DbMJY6aqgq5YANszzem1ktJphPCNxq081cbczCOUpCNX4aL+0/ANvxxD
# lbJQB+SZeIRmuFbxYPhq68rtzB4vG7tsQpns4H33EPKT4vuzF70lq4fgptMiun3q
# 1ZJ2LF3jonvQWdhbC17wzAQz0FFb4F7XOxz++UL4okPsgzsYItnd+TWs8q7+erRb
# 84UwN+eBTBAl/FiNk679/tBTqAfCVGgQ7dzotr4f3tg5POvrGOrlEjAn0O+dGGDj
# wgILmpEBsTsilRB1tz8Kw0j/v/VkHz1DJu45lRAV9CIrN22iKcjMilNGgNDT8kcI
# yAlxAw3iN+hVFqDov8wFPjDYd/Qw2oRAPy2Kd14hW9xL8zBOTms1JK5L0PS2+Feo
# ZjMJ2cOJq3t4Wt1ZXRhgHfF4ANwP0OZ/y9bHCy3CkBljEeiTQbikHP9gVV4qHXZH
# 4Q0HnDZQwAgobw3CmZ8jVx1dQueqy3ycuvkhCyv3S0l/tdbtXDtr5pNNu3dAP/PJ
# 3nifLdRImhDvxxO9GKaCdUVLzELzMJl0GrgAsVJPKVnKHA4IiVKmB+XcW9IUbfy/
# 3zA2wHJLrEF+MF6MsuNcEYCCqUvyNLm7rUrXk1wNLXpCJ35bbW5IYy7Ty/8E2GHb
# D5Cv/EPNhMBiNA4+HqQlMOTC13Ozv2qwCuWYCh2Ik8mnzaEiyTo=
# =0C5S
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 01 Feb 2024 07:35:11 GMT
# gpg:                using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B  0B60 51A3 43C7 CFFB ECA1

* tag 'pull-aspeed-20240201' of https://github.com/legoater/qemu:
  hw/fsi: Update MAINTAINER list
  hw/fsi: Added FSI documentation
  hw/fsi: Added qtest
  hw/arm: Hook up FSI module in AST2600
  hw/fsi: Aspeed APB2OPB & On-chip peripheral bus
  hw/fsi: Introduce IBM's FSI master
  hw/fsi: Introduce IBM's cfam
  hw/fsi: Introduce IBM's fsi-slave model
  hw/fsi: Introduce IBM's FSI Bus
  hw/fsi: Introduce IBM's scratchpad device
  hw/fsi: Introduce IBM's Local bus
  hw/arm/aspeed: Check for CPU types in machine_run_board_init()
  hw/arm/aspeed: Introduce aspeed_soc_cpu_type() helper
  hw/arm/aspeed: Init CPU defaults in a common helper
  hw/arm/aspeed: Set default CPU count using aspeed_soc_num_cpus()
  hw/arm/aspeed: Remove dead code
  tests/avocado/machine_aspeed.py: Update buildroot images to 2023.11

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'pull-loongarch-20240201' of https://gitlab.com/gaosong/qemu into staging

pull-loongarch-20240201

# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZbtI0AAKCRBAov/yOSY+
# 35J4A/9ehl15MIrkByqq8QNQnG4PbKWOTcTev6P0sEAhzPUtBpcGPesoHnt+DFuk
# f3WluWsfnFY9pCRgB9VBSpy89O6Efj187bpekT/PD5svPOXoUmETafv1p2vsVrpj
# huMNijt7I/LAXUCb2gA5pnNH9vrrJ8E5kQlgmYfh35cEhHObMQ==
# =Q9Gn
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 01 Feb 2024 07:31:28 GMT
# gpg:                using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C  6C2C 40A2 FFF2 3926 3EDF

* tag 'pull-loongarch-20240201' of https://gitlab.com/gaosong/qemu:
  target/loongarch: Fix qtest test-hmp error when KVM-only build

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/fsi: Update MAINTAINER list

Add maintainer for IBM FSI model

Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: - slight change in commit log
       - fixed file list ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/fsi: Added FSI documentation

Documentation for IBM FSI model.

Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg : - Removed source file list
        - Fixed aspeed machine reference ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/fsi: Added qtest

Added basic qtests for FSI model.

Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
[ clg: aspeed-fsi-test.c -> aspeed_fsi-test.c to match other filenames ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/arm: Hook up FSI module in AST2600

This patchset introduces IBM's Flexible Service Interface(FSI).

Time for some fun with inter-processor buses. FSI allows a service
processor access to the internal buses of a host POWER processor to
perform configuration or debugging.

FSI has long existed in POWER processes and so comes with some baggage,
including how it has been integrated into the ASPEED SoC.

Working backwards from the POWER processor, the fundamental pieces of
interest for the implementation are:

1. The Common FRU Access Macro (CFAM), an address space containing
   various "engines" that drive accesses on buses internal and external
   to the POWER chip. Examples include the SBEFIFO and I2C masters. The
   engines hang off of an internal Local Bus (LBUS) which is described
   by the CFAM configuration block.

2. The FSI slave: The slave is the terminal point of the FSI bus for
   FSI symbols addressed to it. Slaves can be cascaded off of one
   another. The slave's configuration registers appear in address space
   of the CFAM to which it is attached.

3. The FSI master: A controller in the platform service processor (e.g.
   BMC) driving CFAM engine accesses into the POWER chip. At the
   hardware level FSI is a bit-based protocol supporting synchronous and
   DMA-driven accesses of engines in a CFAM.

4. The On-Chip Peripheral Bus (OPB): A low-speed bus typically found in
   POWER processors. This now makes an appearance in the ASPEED SoC due
   to tight integration of the FSI master IP with the OPB, mainly the
   existence of an MMIO-mapping of the CFAM address straight onto a
   sub-region of the OPB address space.

5. An APB-to-OPB bridge enabling access to the OPB from the ARM core in
   the AST2600. Hardware limitations prevent the OPB from being directly
   mapped into APB, so all accesses are indirect through the bridge.

The implementation appears as following in the qemu device tree:

    (qemu) info qtree
    bus: main-system-bus
      type System
      ...
      dev: aspeed.apb2opb, id ""
        gpio-out "sysbus-irq" 1
        mmio 000000001e79b000/0000000000001000
        bus: opb.1
          type opb
          dev: fsi.master, id ""
            bus: fsi.bus.1
              type fsi.bus
              dev: cfam.config, id ""
              dev: cfam, id ""
                bus: fsi.lbus.1
                  type lbus
                  dev: scratchpad, id ""
                    address = 0 (0x0)
        bus: opb.0
          type opb
          dev: fsi.master, id ""
            bus: fsi.bus.0
              type fsi.bus
              dev: cfam.config, id ""
              dev: cfam, id ""
                bus: fsi.lbus.0
                  type lbus
                  dev: scratchpad, id ""
                    address = 0 (0x0)

The LBUS is modelled to maintain the qdev bus hierarchy and to take
advantage of the object model to automatically generate the CFAM
configuration block. The configuration block presents engines in the
order they are attached to the CFAM's LBUS. Engine implementations
should subclass the LBusDevice and set the 'config' member of
LBusDeviceClass to match the engine's type.

CFAM designs offer a lot of flexibility, for instance it is possible for
a CFAM to be simultaneously driven from multiple FSI links. The modeling
is not so complete; it's assumed that each CFAM is attached to a single
FSI slave (as a consequence the CFAM subclasses the FSI slave).

As for FSI, its symbols and wire-protocol are not modelled at all. This
is not necessary to get FSI off the ground thanks to the mapping of the
CFAM address space onto the OPB address space - the models follow this
directly and map the CFAM memory region into the OPB's memory region.
Future work includes supporting more advanced accesses that drive the
FSI master directly rather than indirectly via the CFAM mapping, which
will require implementing the FSI state machine and methods for each of
the FSI symbols on the slave. Further down the track we can also look at
supporting the bitbanged SoftFSI drivers in Linux by extending the FSI
slave model to resolve sequences of GPIO IRQs into FSI symbols, and
calling the associated symbol method on the slave to map the access onto
the CFAM.

Testing:
    Tested by reading cfam config address 0 on rainier machine type.

    root@p10bmc:~# pdbg -a getcfam 0x0
    p0: 0x0 = 0xc0022d15

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>