[Why]
Primary and underlay planes were previously exposed to DRM by using
max_planes and max_slave_planes.
The value for max_planes was always pipe_count + has_underlay.
If there was an underlay pipe, then max_slave_planes = 1.
Raven has pipe_count = 4, max_planes = 4, and max_slave_planes = 1.
So during plane initialziation it was actually "creating"
1 overlay plane and 3 primary planes... or it would be, had its
plane_type array not been dm_plane_type_default, which will only create
DRM_PLANE_TYPE_PRIMARY planes.
We can expose primary planes as supporting more than one CRTC at a time
to more closely resemble plane behavior on DCN but userspace doesn't
really expect planes to be used in this manner and will either
ignore the planes or crash.
Planes with index greater than max_streams are marked as supporting
all CRTCs. No ASIC currently has primary plane count greater than the
stream count but we shouldn't expose more than necessary.
[How]
Drop support for underlay planes. They aren't well tested and don't
fully work right at the moment.
Only create one primary plane per CRTC so we're not creating overlays.
Initialize plane types directly instead of referencing a misleading
array of plane types.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Add plane capabilities to dc_caps
[Why]
The current dc_caps doesn't provide the information needed to
determine the count and type of each plane to be exposed to userspace.
There are three types of DRM planes that are exposed to userspace:
1. Primary planes (can be used for modesetting)
2. Overlay planes (can be blended below or above a primary plane)
3. Cursor planes (blended topmost)
We need to know the number and type of each in amdgpu_dm to expose
to userspace.
Hardware supports blending planes below, above or both ways depending
on the ASIC. Alpha support is also ASIC dependent. Some hardware has
dedicated pipes for overlays and other hardware combines the pipes.
All of this should be exposed in a way that DM can query and use.
[How]
Introduce the dc_plane_cap structure that describes the capabilities
for the hw planes.
It describes:
- the type of the plane
- whether the plane can blend with planes below it
- whether the plane can blend with planes above it
- whether the plane supports per pixel alpha blending
- supported formats on the plane (partial list for now)
Pre DCN ASICs don't have their full capabilities described for now.
They can be updated as needed in the future.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Set stream->mode_changed when connectors change
[Why]
The kms_plane@plane-position-covered-pipe-*-planes subtests can produce
a sequence of atomic commits such that neither active_changed nor
mode_changed but connectors_changed.
When this happens we remove the old stream from the context and add
a new stream but the new stream doesn't have mode_changed=true set.
This incorrect programming sequence causes CRC mismatches to occur in
the test.
The stream->mode_changed value should be set whenever a new stream
is created.
[How]
A new stream is created whenever drm_atomic_crtc_needs_modeset is true.
We previously covered the active_changed and mode_changed conditions
for the CRTC but connectors_changed is also checked within
drm_atomic_crtc_needs_modeset.
So just use drm_atomic_crtc_needs_modeset directly to determine the
mode_changed flag.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Thomas Lim [Wed, 16 Jan 2019 20:56:56 +0000 (15:56 -0500)]
drm/amd/display: Respect aux return values
[Why]
The new aux implementation was not up to spec. This caused us to fail DP
compliance as well as introduced serious delays during system resume.
[How]
Make dce_aux_transfer_raw return the operation result
Make dce_aux_transfer_with_retries delay with udelay instead
of msleep, and only on invalid reply. Also fail on the second
invalid reply, third timeout, or first of any other error
Convert return values to drm error codes in amdgpu_dm
As the two aux transfer functions are now noticeably
different, change the names to better reflect their
functionality and document.
There was one last call to dc_link_aux_transfer that
should have retries, fix that
Signed-off-by: David Francis <David.Francis@amd.com> Signed-off-by: Thomas Lim <Thomas.Lim@amd.com> Reviewed-by: David Francis <David.Francis@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Eric Yang <eric.yang2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jun Lei [Tue, 12 Feb 2019 17:09:24 +0000 (12:09 -0500)]
drm/amd/display: add full update commit hint struct
In some cases we might need to do a full update. Add a commit_hints
struct for future use
Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Martin Tsai [Mon, 11 Feb 2019 07:26:21 +0000 (15:26 +0800)]
drm/amd/display: Poll pending DOWN_REP before enabling the link
[Why]
With special monitor combination on MST, the UP_REQ could come
after clear payload table. It makes the pending DOWN_REP fail
to be handled after link training and the new DOWN_REQ will be queued
until time out .
[How]
To move the current polling pending DOWN_REP procedure to after
clear payload table to make sure the pending DOWN_REP can be
done before enabling the link.
Signed-off-by: Martin Tsai <martin.tsai@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kent Russell [Thu, 28 Feb 2019 12:05:02 +0000 (07:05 -0500)]
drm/amdgpu: Add sysfs files for returning VRAM/GTT info v2
Add 6 files that return (in bytes):
The total amount of VRAM/visible VRAM/GTT
and the current total used VRAM/visible VRAM/GTT
v2: Split used and total into separate files
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Kent Russell <kent.russell@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Likun Gao [Fri, 1 Feb 2019 05:22:33 +0000 (13:22 +0800)]
drm/amd/powerplay: add od condition for power limit
Add condition to judge whether overdrive is enabled and correct power
limit value for overdrive used by power limit interface.
Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Tue, 12 Feb 2019 07:39:44 +0000 (15:39 +0800)]
drm/amd/powerplay: fix byte alignment issue of smu11 pptable
The smu_11_0_powerplay_table, smu_11_0_power_saving_clock_table, and
smu_11_0_overdrive_table need byte alignment. So we must add packed attribute
in the definitions.
Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Likun Gao [Wed, 20 Feb 2019 05:42:55 +0000 (13:42 +0800)]
drm/amd/powerplay: support sysfs to set socclk, fclk, dcefclk
Add sys interface to set socclk, fclk and dcefclk for smu.
Add feature_mask parameter for smu_upload_dpm_level as socclk, fclk and
dcefclk have dependency, without feature_mask to point out specific clk
will make it fail to set some clk.
Fix the function of smu_unforce_dpm_levels.
Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Gui Chengming <Jack.Gui@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Likun Gao [Fri, 25 Jan 2019 09:45:24 +0000 (17:45 +0800)]
drm/amd/powerplay: set fan target interface for hwmon
Add fan1_target set interface to set fan speed for hwmon.
Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Chengming Gui [Fri, 25 Jan 2019 08:21:27 +0000 (16:21 +0800)]
drm/amd/powerplay: implement pwm1_enable hwmon interface for SMU11 (v2)
1, set get_pwm1_enable and set_pwm1_enable functions to call
smu_get_fan_control_mode and smu_set_fan_control_mode for SMU11
2, implement set_fan_control_mode function
v2: add return value in set_fan_control_mode function
Signed-off-by: Chengming Gui <Jack.Gui@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Chengming Gui [Thu, 24 Jan 2019 09:50:57 +0000 (17:50 +0800)]
drm/amd/powerplay: add STABLE_PSTATE_SCLK and STABLE_PSTATE_MCLK when read sensor for SMU11
add AMDGPU_PP_SENSOR_STABLE_PSTATE_SCLK and
AMDGPU_PP_SENSOR_STABLE_PSTATE_MCLK to support
read sensor for SMU11.
Signed-off-by: Chengming Gui <Jack.Gui@amd.com> Reviewed-by: Kevin Wang <kevink1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Chengming Gui [Tue, 22 Jan 2019 09:56:16 +0000 (17:56 +0800)]
drm/amd/powerplay: implement power1_cap and power1_cap_max interface for SMU11 (v2)
add get_power_limit and set_power_limit functions
to support hwmon for SMU11.
v2: fix the code style issue.
Signed-off-by: Chengming Gui <Jack.Gui@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Likun Gao [Fri, 25 Jan 2019 09:45:24 +0000 (17:45 +0800)]
drm/amd/powerplay: add fan input interface for hwmon
Add fan1_input and fan1_target interface to get fan speed info for hwmon.
Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Likun Gao [Fri, 25 Jan 2019 10:29:31 +0000 (18:29 +0800)]
drm/amd/powerplay: add fan rpm limit interface for hwmon
Add fan1_min and fan2_max function for hwmon.
Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Mon, 28 Jan 2019 07:14:47 +0000 (15:14 +0800)]
drm/amd/powerplay: debugfs don't check powerplay when SW SMU is enabled.
when sw smu is enabled, the powerplay interface isn't implemented.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Fri, 25 Jan 2019 09:33:40 +0000 (17:33 +0800)]
drm/amd/powerplay: enable amdgpu dpm for smu
enable amdgpu dpm global flag
Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Likun Gao [Thu, 24 Jan 2019 11:53:40 +0000 (19:53 +0800)]
drm/amd/powerplay: Unify smu handle task function (v2)
Unify power stade adjust function into smu_handle_task by the judgment
of task_id.
Move functions which have no relationship with smu version into the file
of amdgpu_smu.
Modified the function of smu_display_config_changed into two part.
Unify some similiar function.
v2: Correct the operation of upload dpm level when force dpm limit value.
Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Fri, 25 Jan 2019 07:10:13 +0000 (15:10 +0800)]
drm/amd/powerplay: implement dpm enable functions of uvd & vce for smu
add function of dpm enable uvd & vce for extern module use.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Fri, 25 Jan 2019 08:22:20 +0000 (16:22 +0800)]
drm/amd/powerplay: implement sensor of uvd & vce power state for smu11
add functions of uvd & vce for hwmon.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Thu, 24 Jan 2019 11:14:22 +0000 (19:14 +0800)]
drm/amd/powerplay: hwmon don't check powerplay when sw smu is enabled
when sw-smu is enabled, the driver won't init powerplay structure.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Likun Gao <Likun.Gao@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Thu, 24 Jan 2019 07:27:02 +0000 (15:27 +0800)]
drm/amd/powerplay: implement update enabled feature state to smc for smu11
change:
1.when enable smu feature, the feature id will store sw-bitmap and smu
controller.
2.add feature mutex lock to protect feature bitmap changed when update
feature enabled state.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Likun Gao [Wed, 23 Jan 2019 05:37:39 +0000 (13:37 +0800)]
drm/amd/powerplay: dpm clk can be set only when performance level is manual
Add condition to make dpm clk can not be set when perfomance level isn't
equal to manual.
Add mutex lock to smu when set dpm clk.
Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Likun Gao [Wed, 23 Jan 2019 03:10:59 +0000 (11:10 +0800)]
drm/amd/powerplay: adjust power state when set od_clk
Expose the function of adjust_power_state_dynamic to make it common to
other functions.
Add the operate of adjust powet state when set od percentage or
overdrive commit dpm table.
Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Likun Gao [Mon, 21 Jan 2019 06:58:38 +0000 (14:58 +0800)]
drm/amd/powerplay: add sys interface to set pp_od_clk_voltage for smu
Add sys interface to set pp_od_clk_voltage for smu.
Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Likun Gao [Fri, 18 Jan 2019 08:15:14 +0000 (16:15 +0800)]
drm/amd/powerplay: add sys interface for set sclk_od/mclk_od for smu
Add sys interface for set pp_sclk_od and pp_mclk_od for smu.
Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Likun Gao [Fri, 18 Jan 2019 07:00:15 +0000 (15:00 +0800)]
drm/amd/powerplay: add function to update overdrive settings
Add function of smu_update_specified_od8_value to modify specified
overdrive value.
Add fucntion of smu_update_od8_settings to update overdrive table.
Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Likun Gao [Fri, 18 Jan 2019 04:53:27 +0000 (12:53 +0800)]
drm/amd/powerplay: add sys interface for pcie for smu
Add sys interface for set/get PCIE info for SMU.
The related operate will do nothing as vega20 do not support it now.
Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Chengming Gui [Fri, 18 Jan 2019 02:09:46 +0000 (10:09 +0800)]
drm/amd/powerplay: add vega20_find/force_higest/lowest_dpm for SMU11 (v2)
add vega20_find_highest_dpm_level, vega20_find_lowest_dpm_level,
vega20_force_highest_dpm and vega20_force_lowest_dpm functions
to support sys interface for SMU11.
Chengming Gui [Fri, 4 Jan 2019 09:42:09 +0000 (17:42 +0800)]
drm/amd/powerplay: implement power_dpm_state sys interface for SMU11
Add functions to get/set dpm state for SMU11.
Signed-off-by: Chengming Gui <Jack.Gui@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Kevin Wang <kevin.wang@amd.com> Reviewd-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Wed, 23 Jan 2019 11:09:08 +0000 (19:09 +0800)]
drm/amd/powerplay: don't check hwmgr while using the sw smu
While using the sw smu path, driver won't init hwmgr structure.
Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Likun Gao <Likun.Gao@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Likun Gao [Mon, 14 Jan 2019 09:22:09 +0000 (17:22 +0800)]
drm/amd/powerplay: get overdrive clock and voltage information
Add sys interface to get overdrive clock and voltage information for
smu11.
Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Likun Gao [Fri, 11 Jan 2019 10:47:14 +0000 (18:47 +0800)]
drm/amd/powerplay: print overdrive percentage information for smu11
Add function to get sclk or mclk overdrive percentage information for smu11.
Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Likun Gao [Fri, 11 Jan 2019 09:42:47 +0000 (17:42 +0800)]
drm/amd/powerplay: add golden dpm table to backup default DPM table (v2)
Backup default DPM table into golden dpm table.
v2: fix dpm_context and golden_dpm_context kfree two times issue.
Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Likun Gao [Wed, 9 Jan 2019 11:11:58 +0000 (19:11 +0800)]
drm/amd/powerplay: add function to set default overdrive settings
Add function of vega20_set_default_od8_setttings for vega20 with smu11
arch to setup default overdrive value.
Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Likun Gao [Tue, 8 Jan 2019 06:18:02 +0000 (14:18 +0800)]
drm/amd/powerplay: add function to store overdrive information for smu11
Add vega20_setup_od8_information function to store overdrive information
from powerplay_table to smu_table which will used when setting od8.
Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Thu, 17 Jan 2019 07:25:37 +0000 (15:25 +0800)]
drm/amd/powerplay: implement interface to set watermarks for clock ranges
This patch implements inteferface to set watermarks table for clock ranges on
smu 11. It fills watermark table before it is written to SMC.
Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Kevin Wang <Kevin1.Wang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Wed, 16 Jan 2019 10:55:33 +0000 (18:55 +0800)]
drm/amd/powerplay: add interface to notify smu enable pme restore register
This patch adds interface to notify smu enable pme restore register for display
and in smu v11 didn't have this implementation.
Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Kevin Wang <Kevin1.Wang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Wed, 16 Jan 2019 06:43:29 +0000 (14:43 +0800)]
drm/amd/powerplay: add interface to get current clocks for display
This patch fills the amd_pp_clock_info data for display, it will get the current
info in that structure.
Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Kevin Wang <Kevin1.Wang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Wed, 16 Jan 2019 06:30:11 +0000 (14:30 +0800)]
drm/amd/powerplay: add interface to get current shallow sleep clocks
This patch adds interface to get current shallow sleep clocks for display and in
smu v11 didn't have this implementation.
Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Kevin Wang <Kevin1.Wang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Wed, 16 Jan 2019 06:22:16 +0000 (14:22 +0800)]
drm/amd/powerplay: add interface to get performance level
This patch adds interface to get performance level for display and in smu v11
didn't have this implementation.
Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Kevin Wang <Kevin1.Wang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Wed, 16 Jan 2019 06:10:59 +0000 (14:10 +0800)]
drm/amd/powerplay: add interface to get dal power level
This patch adds interface to get dal power level for display and in smu v11
didn't have this implementation.
Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Kevin Wang <Kevin1.Wang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Fri, 11 Jan 2019 09:33:41 +0000 (17:33 +0800)]
drm/amd/powerplay: add interface to get max high clocks for display
This patch adds interface to get max high clocks for display and in smu v11
didn't have this implementation.
Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kevin Wang <Kevin1.Wang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Fri, 11 Jan 2019 09:12:04 +0000 (17:12 +0800)]
drm/amd/powerplay: add get_clock_by_type interface for display
This patch adds get_clock_by_type interface for display, in smu v11 didn't have
the implementation.
Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kevin Wang <Kevin1.Wang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Fri, 11 Jan 2019 08:23:36 +0000 (16:23 +0800)]
drm/amd/powerplay: add smu display configuration change function
This patch adds display configuration change function that creates the new path
with sw smu driver instead of powerplay.
Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kevin Wang <Kevin1.Wang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Fri, 11 Jan 2019 08:12:03 +0000 (16:12 +0800)]
drm/amd/powerplay: add two interfaces to set_active_display_count and store_cc6_data
This patch adds two interfaces to set_active_display_count and store_cc6_data,
they won't be used for smu11, and just be the placeholders for future asic on
display to smu interface.
Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kevin Wang <Kevin1.Wang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Fri, 11 Jan 2019 07:51:16 +0000 (15:51 +0800)]
drm/amd/powerplay: add the function to set deep sleep dcefclk
This patch adds the function to set deep sleep dcefclk. It will be used on
display part.
Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kevin Wang <Kevin1.Wang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Thu, 17 Jan 2019 05:46:08 +0000 (13:46 +0800)]
drm/amd/powerplay: implement sysfs of pp_force_state for sw-smu
the SMU v11 doesn’t support pp_force_state so far, so we didn’t implement
it.
Signed-off-by: Kevin Wang <Kevin1.Wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Thu, 17 Jan 2019 05:29:06 +0000 (13:29 +0800)]
drm/amd/powerplay: implement sysfs of pp_cur_state function
add function of smu_get_currente_state for sw-smu.
v2: fix code typo error if (ret);
Signed-off-by: Kevin Wang <Kevin1.Wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Thu, 17 Jan 2019 05:15:48 +0000 (13:15 +0800)]
drm/amd/powerplay: implement sysfs of get num states function
add function smu_get_power_num_state function for sw-smu.
it's only for sysfs interface, the power state feature is not ready for sw-smu.
Signed-off-by: Kevin Wang <Kevin1.Wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Wed, 16 Jan 2019 01:55:03 +0000 (09:55 +0800)]
drm/amd/powerplay: implement sensor of get feature mask
add sensor interface of feature mask for debugfs.
this interface is not ip related function, so need move high level
file to implement (amdgpu_smu)
Signed-off-by: Kevin Wang <Kevin1.Wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Wed, 16 Jan 2019 05:31:12 +0000 (13:31 +0800)]
drm/amd/powerplay: implement sensor of get_gfx_vdd for smu11
add sensor interface of gfx vdd for hwmon
Signed-off-by: Kevin Wang <Kevin1.Wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Wed, 16 Jan 2019 05:27:52 +0000 (13:27 +0800)]
drm/amd/powerplay: implement sensor of get_gpu_power for smu11
add sensor interface of get gpu power for debugfs and hwmon.
Signed-off-by: Kevin Wang <Kevin1.Wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Tue, 15 Jan 2019 04:37:35 +0000 (12:37 +0800)]
drm/amd/powerplay: implement sensor of thermal_get_temperature for smu11
add sensor interface of thermal temperature for debugfs and hwmon.
Signed-off-by: Kevin Wang <Kevin1.Wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Tue, 15 Jan 2019 04:25:59 +0000 (12:25 +0800)]
drm/amd/powerplay: implement sensor of SCLK and MCLK for smu11
add sensor interface of SCLK and MCKL for sys interface and hwmon.
Signed-off-by: Kevin Wang <Kevin1.Wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Fri, 11 Jan 2019 07:07:52 +0000 (15:07 +0800)]
drm/amd/powerplay: implement sysfs of pp_table for smu11 (v2)
add pp_table sysfs interface for new sw-smu.
get: return pptable raw data
set: write pptable raw data to pptable, then reset smu (hw_fini -> hw_init)
v2: fix mutex lock issue
Signed-off-by: Kevin Wang <Kevin1.Wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Fri, 11 Jan 2019 06:51:24 +0000 (14:51 +0800)]
drm/amd/powerplay: implement sysfs of amdgpu_get_busy_percent for smu11
add interface amdgpu_get_busy_percent for smu11
v2: convert data pointer type to uint32_t *.
Signed-off-by: Kevin Wang <Kevin1.Wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Thu, 10 Jan 2019 04:33:23 +0000 (12:33 +0800)]
drm/amd/powerplay: implement is_support_sw_smu function for new smu
add this helper to check new sw-smu support.
Signed-off-by: Kevin Wang <Kevin1.Wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Mon, 7 Jan 2019 07:34:09 +0000 (15:34 +0800)]
drm/amd/powerplay: implement smu update table function
sometime, the driver need changed table data between driver and smu.
this function can help update table data
Signed-off-by: Kevin Wang <Kevin1.Wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
projects / mirror_ubuntu-kernels.git / log