Sai Gomathi N [Tue, 18 Jan 2022 14:36:17 +0000 (06:36 -0800)]
pim6d: Adding the base changes
Adding the file pim6_cmd.h and pim6d_cmd.c as the base changes
for implementing the CLI changes
Removed the pim_cmd_init from the stub file.
Co-authored-by: Sarita Patra <saritap@vmware.com> Co-authored-by: Abhishek N R <abnr@vmware.com> Co-authored-by: Sai Gomathi N <nsaigomathi@vmware.com> Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Ryoga Saito [Fri, 25 Feb 2022 13:42:32 +0000 (13:42 +0000)]
bgpd: announce locators instead of transposed SIDs
This patch changes the format of the Prefix-SID advertised by
bgpd. In current implementation, transposed SIDs were
advertised, which caused two problems:
1. bgpd that receives SRv6 L3VPN routes whose SID is
transposed couldn't put bgp_attr_srv6_l3vpn whose those
routes together. This leads extra memory consumption.
2. Some implementation will reject a route with transposed SID.
This will affect interoperability.
For those reasons, in this patch, instead of advertising
transposed SID, we change it to advertise the locator of SID.
Mark Stapp [Thu, 28 Oct 2021 15:23:31 +0000 (11:23 -0400)]
zebra: use dataplane to read interface NETCONF info
Use the dataplane to query and read interface NETCONF data;
add netconf-oriented data to the dplane context object, and
add accessors for it. Add handler for incoming update
processing.
Mark Stapp [Mon, 18 Oct 2021 15:55:24 +0000 (11:55 -0400)]
zebra: add xxxNETCONF messages to the netlink BPF filter
Allow self-produced xxxNETCONF netlink messages through the BPF
filter we use. Just like address-configuration actions, we'll
process NETCONF changes in one path, whether the changes were
generated by zebra or by something else in the host OS.
Donald Sharp [Tue, 4 May 2021 12:50:00 +0000 (08:50 -0400)]
zebra: Start of work to get data about mpls from kernel
a) We'll need to pass the info up via some dataplane control method
(This way bsd and linux can both be zebra agnostic of each other)
b) We'll need to modify `struct interface *` to track this data
and when it changes to notify upper level protocols about it.
c) Work is needed to dump the entire mpls state at the start
so we can gather interface state. This should be done
after interface data gathering from the kernel.
Signed-off-by: Donald Sharp <sharpd@nvidia.com> Signed-off-by: Mark Stapp <mstapp@nvidia.com>
Donald Sharp [Fri, 25 Feb 2022 13:19:07 +0000 (08:19 -0500)]
lib: Add a Dev catch for when a timer is set for > 1 year
Since there are timers that are created based upon doing some
math and we know that unsigned values when doing math and we accidently
subtract a larger number from a smaller number causes the unsigned
number to wrap to very large numbers, let's put in a small catch
in place to see if there are any places in the system that
mistakes are made and FRR is accidently creating a problem
for itself.
rgirada [Thu, 24 Feb 2022 17:33:08 +0000 (09:33 -0800)]
ospfd: NULL passed instead of ei pointer in external lsa origination
Description:
NULL pointer wrongly passed instead of 'ei' pointer to
ospf_external_lsa_originate() API in opaque capability enable/disable
which always make it to fail in origination.
Corrected it by passing actual ei pointer.
Description:
===========
Change is intended for fixing the NHT resolution logic.
While recursively resolving nexthop, keep looking for a valid/useable route in the rib,
by not stopping at the first/most-specific route in the rib.
Consider the following set of events taking place on R1:
R1(config)# ip route 2.2.2.0/24 ens192
R1# sharp watch nexthop 2.2.2.32 connected
R1# show ip nht
2.2.2.32(Connected)
resolved via static
is directly connected, ens192
Client list: sharp(fd 33)
-2.2.2.32 NHT is resolved over the above valid static route.
-Now a .31/32 comes which will resolve over .32 route, but as per the current logic,
this will trigger the NHT check, in turn making the NHT unresolved.
-With fix, NHT should stay in resolved state as long as the valid static or connected route stays installed
Fix:
====
-While resolving nexthops, walk up the tree from the most-specific match,
walk up the tree without any ZEBRA_NHT_CONNECTED check.
Donald Sharp [Fri, 18 Feb 2022 15:45:46 +0000 (10:45 -0500)]
bfdd: Fix overflow possibility with time statements
If time ( a uint64_t ) is large enough doing division
and subtraction can still lead to situations where
the resulting number is greater than a uint32_t.
Just use uint32_t as an intermediate storage spot.
This is unlikely to every occur in a time frame
I could possibly care about but makes Coverity happy.
bharat(config-route-map)# match evpn route-type 4
bharat(config-route-map)# do show running-config
Building configuration...
...
!
route-map ALLOW_EVPN_R permit 10
match evpn route-type es <----
exit
BGP:
route-map: ALLOW_EVPN_R Invoked: 0 Optimization: enabled Processed Change: false
permit, sequence 10 Invoked 0
Match clauses:
evpn route-type es <-----
Set clauses:
Call clause:
Action:
Exit routemap
David Lamparter [Wed, 19 Jan 2022 14:45:11 +0000 (15:45 +0100)]
pim6d: isolate remaining TODOs into stubs file
This creates `pim6_stubs.c`, which is intended to temporarily provide
stubbed-out definitions of some functions we don't have yet for IPv6.
This makes pim6d compile without the `PIM_V6_TEMP_BREAK` hack, and is
very important as an intermediate step to get a working environment for
further work.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
David Lamparter [Tue, 18 Jan 2022 13:33:04 +0000 (14:33 +0100)]
pim6d: IPv6-adjust mroute code
This is just hitting the pim_mroute code with a hammer until it doesn't
print warnings anymore. This is NOT quite tested or working yet, it
just compiles.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Donald Sharp [Wed, 16 Feb 2022 00:47:23 +0000 (19:47 -0500)]
ripd: Fix packet send for non primary addresses
When rip is configured to work on secondary addresses
on an interface, rip was not properly sending out
the packets on secondary addresses because the source of the
packet was never properly being setup and rip would
send the packet out multiple times for the primary address
not once for each address on the interface that is setup to work.
Donald Sharp [Tue, 15 Feb 2022 20:53:30 +0000 (15:53 -0500)]
bgpd: Convert bgp error codes for cli input to an enum
Conversion of bgp error codes returned for cli input into
an enum and then properly handling all the error cases
in bgp_vty_return.
Because not all error codes returned were properly handled
in this function there existed configuration examples that
were accepted on the cli without an error message but not
saved.
Fixes: #10589 Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Donald Sharp [Tue, 15 Feb 2022 21:04:50 +0000 (16:04 -0500)]
bgpd: Move some error codes to bgp_vty_return handling
BGP_ERR_PEER_GROUP_MEMBER and BGP_ERR_PEER_GROUP_PEER_TYPE_DIFFERENT
both are not handled by bgp_vty_return, but both can be handled by
this function as that there is nothing special going on here.
Donald Sharp [Tue, 15 Feb 2022 20:54:53 +0000 (15:54 -0500)]
bgpd: Remove impossible invalid state
confederations are checking to see that the bgp pointer
is non-null. But it's impossible to have a null pointer
in the cli and in all paths we have already deref'ed the bgp
pointer. Let's remove that error code as that it is impossible
to happen.
Donald Sharp [Mon, 14 Feb 2022 12:57:45 +0000 (07:57 -0500)]
bgp: Add a 15 minute warning to missing policy
Add a 15 minute warning to the logging system when
bgp policy is not setup properly. Operators keep asking
about the missing policy( on upgrade typically ). Let's
try to give them a bit more of a hint when something is
going wrong as that they are clearly missing the other
various places FRR tells them about it.
projects / mirror_frr.git / log