Petr Vorel [Wed, 19 Sep 2018 23:36:22 +0000 (01:36 +0200)]
testsuite: Fix missing generate_nlmsg
Commit ad23e152 caused generate_nlmsg to be always missing:
$ make alltests
make: ./tools/generate_nlmsg: Command not found
Create testclean: to remove only results directory.
Fixes: ad23e152 testsuite: remove all temp files and implement make clean Signed-off-by: Petr Vorel <petr.vorel@gmail.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Leon Romanovsky [Sun, 16 Sep 2018 17:28:13 +0000 (20:28 +0300)]
rdma: Fix representation of PortInfo CapabilityMask
The port capability mask represents IBTA PortInfo specification,
but as it is written in description of kernel commit 2f944c0fbf58
("RDMA: Fix storage of PortInfo CapabilityMask in the kernel"),
the bit 26 was mistakenly overwritten.
The rdmatool followed it too and mislead users by presenting wrong
value. Since it never showed proper value, we update the whole
port_cap_mask to comply with IBTA and show real HW values.
Fixes: da990ab40a92 ("rdma: Add link object") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
libnetlink: fix leak and using unused memory on error
If an error happens in multi-segment message (tc only)
then report the error and stop processing further responses.
This also fixes refering to the buffer after free.
The sequence check is not necessary here because the
response message has already been validated to be in
the window of the sequence number of the iov.
Hangbin Liu [Wed, 12 Sep 2018 01:39:44 +0000 (09:39 +0800)]
bridge/mdb: fix missing new line when show bridge mdb
The bridge mdb show is broken on current iproute2. e.g.
]# bridge mdb show
34: br0 veth0_br 224.1.1.2 temp 34: br0 veth0_br 224.1.1.1 temp
After fix:
]# bridge mdb show
34: br0 veth0_br 224.1.1.2 temp
34: br0 veth0_br 224.1.1.1 temp
v2: Use json print lib as Stephen suggested.
v3: No need to use is_json_context() as print_string() could handle both cases.
v4: use new function print_nl() to print new line in non-json mode.
Reported-by: Ying Xu <yinxu@redhat.com> Fixes: c7c1a1ef51aea ("bridge: colorize output and use JSON print library") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When the GSO splitting was turned into dual split-gso/no-split-gso options,
the printing of the latter was left out. Add that, so output is consistent
with the options passed.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Phil Sutter [Thu, 6 Sep 2018 13:31:51 +0000 (15:31 +0200)]
ip-route: Fix segfault with many nexthops
It was possible to crash ip-route by adding an IPv6 route with 37
nexthop statements. A simple reproducer is:
| for i in `seq 37`; do
| nhs="nexthop via 1111::$i "$nhs
| done
| ip -6 route add 3333::/64 $nhs
The related code was broken in multiple ways:
* parse_one_nh() assumed that rta points to 4kB of storage but caller
provided just 1kB. Fixed by passing 'len' parameter with the correct
value.
* Error checking of rta_addattr*() calls in parse_one_nh() and called
functions was completely absent, so with above fix in place output
flood would occur due to parser looping forever.
While being at it, increase message buffer sizes to 4k. This allows for
at most 144 nexthops.
Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Mahesh Bandewar [Thu, 23 Aug 2018 01:01:37 +0000 (18:01 -0700)]
iproute: make clang happy
These are primarily fixes for "string is not string literal" warnings
/ errors (with -Werror -Wformat-nonliteral). This should be a no-op
change. I had to replace couple of print helper functions with the
code they call as it was becoming harder to eliminate these warnings,
however these helpers were used only at couple of places, so no
major change as such.
Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Mahesh Bandewar [Thu, 23 Aug 2018 01:01:34 +0000 (18:01 -0700)]
ipmaddr: use preferred_family when given
When creating socket() AF_INET is used irrespective of the family
that is given at the command-line (with -4, -6, or -0). This change
will open the socket with the preferred family.
Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Cong Wang [Wed, 29 Aug 2018 17:09:27 +0000 (10:09 -0700)]
ss: add UNIX_DIAG_VFS and UNIX_DIAG_ICONS for unix sockets
UNIX_DIAG_VFS and UNIX_DIAG_ICONS are never used by ss,
make them available in ss -e output.
Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Stefan Bader [Tue, 28 Aug 2018 14:27:29 +0000 (16:27 +0200)]
iprule: Fix destination prefix output
When adding support for JSON output the new code for printing
the destination prefix adds a stray blank character before
the bitmask. This causes some user-space parsing to fail.
Current output:
...: from x.x.x.x/l to y.y.y.y /l
Previous output:
...: from x.x.x.x/l to y.y.y.y/l
Fixes: 0dd4ccc5 "iprule: add json support" Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Luca Boccassi <bluca@debian.org> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
q_cake: Add description of the tc filter override mechanism to man page
Since CAKE now has three different settings that can be overridden by tc
filters (priority and host and flow hashes), documenting how they work is
probably a good idea.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Luca Boccassi [Wed, 22 Aug 2018 18:09:02 +0000 (19:09 +0100)]
testsuite: let make compile build the netlink helper
The generate_nlmsg binary is required but make -C testsuite compile
does not build it. Add the necessary includes and C*FLAGS to the tools
Makefile and have the compile target build it.
Signed-off-by: Luca Boccassi <bluca@debian.org> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Luca Boccassi [Wed, 22 Aug 2018 18:09:01 +0000 (19:09 +0100)]
testsuite: remove all temp files and implement make clean
Some generated test files were not removed, including one executable in
the testsuite/tools directory.
Ensure make clean from the top level directory works for the testsuite
subdirs too, and that all the files are removed.
Signed-off-by: Luca Boccassi <bluca@debian.org> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Stefan Bader [Wed, 22 Aug 2018 08:31:38 +0000 (10:31 +0200)]
testsuite: Handle large number of kernel options
Once there are more than a certain number of kernel config options
set (this happened for us with kernel 4.17), the method of passing
those as command line arguments exceeds the maximum number of
arguments the shell supports. This causes the whole testsuite to
fail.
Instead, create a temporary file and modify its contents so that
the config option variables are exported. Then this file can be
sourced in before running the tests.
Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Luca Boccassi <bluca@debian.org> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Phil Sutter [Fri, 17 Aug 2018 16:38:46 +0000 (18:38 +0200)]
lib: Make check_enable_color() return boolean
As suggested, turn return code into true/false although it's not checked
anywhere yet.
Fixes: 4d82962cccc6a ("Merge common code for conditionally colored output") Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Phil Sutter [Tue, 14 Aug 2018 12:18:07 +0000 (14:18 +0200)]
testsuite: Prepare for ss tests
This merges the shared bits from ts_tc() and ts_ip() into a common
function for being wrapped by the first ones and adds a third ts_ss()
for testing ss commands.
Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Phil Sutter [Tue, 14 Aug 2018 12:18:06 +0000 (14:18 +0200)]
ss: Review ssfilter
The original problem was ssfilter rejecting single expressions if
enclosed in braces, such as:
| sport = 22 or ( dport = 22 )
This is fixed by allowing 'expr' to be an 'exprlist' enclosed in braces.
The no longer required recursion in 'exprlist' being an 'exprlist'
enclosed in braces is dropped.
In addition to that, a few other things are changed:
* Remove pointless 'null' prefix in 'appled' before 'exprlist'.
* For simple equals matches, '=' operator was required for ports but not
allowed for hosts. Make this consistent by making '=' operator
optional in both cases.
Reported-by: Samuel Mannehed <samuel@cendio.se> Fixes: b2038cc0b2403 ("ssfilter: Eliminate shift/reduce conflicts") Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Phil Sutter [Wed, 15 Aug 2018 09:18:26 +0000 (11:18 +0200)]
man: ip-route: Clarify referenced versions are Linux ones
Versioning scheme of Linux and iproute2 is similar, therefore the
referenced kernel versions are likely to confuse readers. Clarify this
by prefixing each kernel version by 'Linux' prefix.
Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Phil Sutter [Wed, 15 Aug 2018 16:21:25 +0000 (18:21 +0200)]
bridge: Fix check for colored output
There is no point in calling enable_color() conditionally if it was
already called for each time '-color' flag was parsed. Align the
algorithm with that in ip and tc by actually making use of 'color'
variable.
Fixes: e9625d6aead11 ("Merge branch 'iproute2-master' into iproute2-next") Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David Ahern <dsahern@gmail.com>
sch_skbprio is a qdisc that prioritizes packets according to their skb->priority
field. Under congestion, it drops already-enqueued lower priority packets to
make space available for higher priority packets. Skbprio was conceived as a
solution for denial-of-service defenses that need to route packets with
different priorities as a means to overcome DoS attacks.
Signed-off-by: Nishanth Devarajan <ndev2021@gmail.com> Reviewed-by: Michel Machado <michel@digirati.com.br> Signed-off-by: David Ahern <dsahern@gmail.com>
Tobias Klauser [Wed, 8 Aug 2018 12:33:40 +0000 (14:33 +0200)]
tc: bpf: update list of archs with eBPF support in manpage
Update the list of architectures supporting eBPF JIT as of Linux 4.18.
Also mention the Linux version where support for a particular
architecture was introduced. Finally, reformat the list of architectures
as a bullet list in order to make it more readable.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Fix hex output for both the ip_attr and tcp_flags print functions.
Sample usage:
$ $TC qdisc add dev lo ingress
$ $TC filter add dev lo parent ffff: prio 3 proto ip flower ip_tos 0x8/32
$ $TC fitler add dev lo parent ffff: prio 5 proto ip flower ip_proto tcp \
tcp_flags 0x909/f00
Matteo Croce [Fri, 3 Aug 2018 17:49:33 +0000 (19:49 +0200)]
ip link: don't stop batch processing
When 'ip link show dev DEVICE' is processed in a batch mode, ip exits
and stop processing further commands.
This because ipaddr_list_flush_or_save() calls exit() to avoid printing
the link information twice.
Replace the exit with a classic goto out instruction.
Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
In a LXC container we're unable to umount the sysfs instance, nor mount
a read-write one. We still are able to create a new read-only instance.
Nevertheless, it still makes sense to attempt the umount() even though
the sysfs is mounted read-only. Otherwise we may end up attempting to
mount a sysfs with the same flags as is already mounted, resulting in
an EBUSY error (meaning "Already mounted").
Perhaps this is not a very likely scenario in real world, but we hit
it in NetworkManager test suite and makes netns_switch() somewhat more
robust. It also fixes the case, when /sys wasn't mounted at all.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
tc: Do not use addattr_nest_compat on mqprio and netem
Here we are partially reverting commit c14f9d92eee107
"treewide: Use addattr_nest()/addattr_nest_end() to handle nested
attributes" .
As discussed in [1], changing from the 'manually' coded version that
used addattr_l() to addattr_nest_compat() wasn't functionally
equivalent, because now the messages have extra fields appended to it.
This introduced a regression since the implementation of parse_attr()
from both mqprio and netem can't handle this new message format.
Without this fix, mqprio returns an error. netem won't return an error
but its internal configuration ends up wrong.
As an example, this can be reproduced by the following commands when
this patch is not applied:
Fixes: c14f9d92eee107 ("treewide: Use addattr_nest()/addattr_nest_end() to handle nested attributes") Reported-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
sch_cake is intended to squeeze the most bandwidth and latency out of even
the slowest ISP links and routers, while presenting an API simple enough
that even an ISP can configure it.
* A hybrid Codel/Blue AQM algorithm, "Cobalt", tied to an FQ_Codel
derived Flow Queuing system, which autoconfigures based on the bandwidth.
* A novel "triple-isolate" mode (the default) which balances per-host
and per-flow FQ even through NAT.
* An deficit based shaper, that can also be used in an unlimited mode.
* 8 way set associative hashing to reduce flow collisions to a minimum.
* A reasonable interpretation of various diffserv latency/loss tradeoffs.
* Support for zeroing diffserv markings for entering and exiting traffic.
* Support for interacting well with Docsis 3.0 shaper framing.
* Support for DSL framing types and shapers.
* Support for ack filtering.
* Extensive statistics for measuring, loss, ecn markings, latency variation.
Various versions baking have been available as an out of tree build for
kernel versions going back to 3.10, as the embedded router world has been
running a few years behind mainline Linux. A stable version has been
generally available on lede-17.01 and later.
sch_cake replaces a combination of iptables, tc filter, htb and fq_codel
in the sqm-scripts, with sane defaults and vastly simpler configuration.
Cake's principal author is Jonathan Morton, with contributions from
Kevin Darbyshire-Bryant, Toke Høiland-Jørgensen, Sebastian Moeller,
Ryan Mounce, Tony Ambardar, Dean Scarff, Nils Andreas Svee, Dave Täht,
and Loganaden Velvindron.
Testing from Pete Heist, Georgios Amanakis, and the many other members of
the cake@lists.bufferbloat.net mailing list.
Signed-off-by: Dave Taht <dave.taht@gmail.com> Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: David Ahern <dsahern@gmail.com>
Alex Vesker [Tue, 17 Jul 2018 08:34:27 +0000 (11:34 +0300)]
devlink: Add support for devlink-region access
Devlink region allows access to driver defined address regions.
Each device can create its supported address regions and register
them. A device which exposes a region will allow access to it
using devlink.
This support allows reading and dumping regions snapshots as well
as presenting information such as region size and current available
snapshots.
A snapshot represents a memory image of a region taken by the driver.
If a device collects a snapshot of an address region it can be later
exposed using devlink region read or dump commands.
This functionality allows for future analyses on the snapshots.
The dump command is designed to read the full address space of a
region or of a snapshot unlike the read command which allows
reading only a specific section in a region/snapshot indicated by
an address and a length, current support is for reading and dumping
for a previously taken snapshot ID.
New commands added:
devlink region show [ DEV/REGION ]
devlink region delete DEV/REGION snapshot SNAPSHOT_ID
devlink region dump DEV/REGION [ snapshot SNAPSHOT_ID ]
devlink region read DEV/REGION [ snapshot SNAPSHOT_ID ]
address ADDRESS length length
Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David Ahern <dsahern@gmail.com>
Qiaobin Fu [Thu, 19 Jul 2018 16:07:18 +0000 (12:07 -0400)]
net:sched: add action inheritdsfield to skbedit
The new action inheritdsfield copies the field DS of
IPv4 and IPv6 packets into skb->priority. This enables
later classification of packets based on the DS field.
v4:
* Make tc use netlink helper functions
v3:
* Make flag represented in JSON output as a null value
v2:
* Align the output syntax with the input syntax
* Fix the style issues
Original idea by Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Qiaobin Fu <qiaobinf@bu.edu> Reviewed-by: Michel Machado <michel@digirati.com.br> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David Ahern <dsahern@gmail.com>
This patch adds support for the End.BPF action of the seg6local
lightweight tunnel. Functions from the BPF lightweight tunnel are
re-used in this patch. Example:
$ ip -6 route add fc00::18 encap seg6local action End.BPF endpoint
obj my_bpf.o sec my_func dev eth0
$ ip -6 route show fc00::18
fc00::18 encap seg6local action End.BPF endpoint my_bpf.o:[my_func]
dev eth0 metric 1024 pref medium
v2: - re-use of print_encap_bpf_prog instead of fprintf
- introduction of "endpoint" keyword for more consistency with
others parameters
Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
ipaddress: Fix and make consistent label match handling
Since commit 9516823051ce ("ipaddress: Improve print_linkinfo()") we
return -1 instead of 0 when ip-address(8) label does not match network
device name as we did before change. This causes regression when trying
to output ip address matching label:
# ip addr add 192.168.192.1/24 dev lo label lo:1
# ip addr show label lo:1
<no output>
This is special case and return 0 from print_linkinfo() earlier to match
only filter.ifindex and filter.up if given, but not rest fields in
@filter. Then call print_selected_addrinfo() without calling
print_link_stats() in ipaddr_list_flush_or_save().
Later print_selected_addrinfo() calls print_addrinfo() that finally
matches IFA_LABEL attribute in netlink buffer with filter.label using
ifa_label_match_rta().
On the other hand there is three conditions checked in print_linkinfo()
to determine label special case:
With 1) it is ok to check if filtering by label is on by given pattern
in @filter.label.
Since label is IPv4 specific and AF_PACKET is for printing ip-link(8)
information (see ipaddr_link_list()::ipaddress.c as example) checking
for AF_PACKET in 2) doesn't take much sense: better to defer these
checks to print_addrinfo() determine valid combinations before calling
ifa_label_match_rta() to finally match IFA_LABEL to pattern in
filter.label.
For 3) we have following call for test case:
fnmatch(pattern, string, flags) ->
fnmatch(filter.label, name, 0) ->
fnmatch("lo:1", "lo", 0) == FNM_NOMATCH (1) or non-zero on error
To support special case in print_linkinfo() for filtering by label we
only need to check if label pattern is given in filter.label and return
0 to skip print_link_stats() in ipaddr_list_flush_or_save(): actual
filtering will be done in print_addrinfo().
Before commit 9516823051ce ("ipaddress: Improve print_linkinfo()"):
-------------------------------------------------------------------
$ ip addr sh label lo
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN \
group default qlen 1000
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
fnmatch("lo", "lo", 0) == 0
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
$ ip addr show label 'lo:*'
inet 192.168.192.1/24 scope global lo:1
valid_lft forever preferred_lft forever
$ ip addr sh label lo:1
inet 192.168.192.1/24 scope global lo:1
valid_lft forever preferred_lft forever
$ ip -4 addr sh label lo:1
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN \
group default qlen 1000
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
filter.family == AF_INET
inet 192.168.192.1/24 scope global lo:1
valid_lft forever preferred_lft forever
After this change applied:
--------------------------
$ ip/ip addr show label lo
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
$ ip/ip addr show label 'lo:*'
inet 192.168.192.1/24 scope global lo:1
valid_lft forever preferred_lft forever
$ ip/ip addr show label lo:1
inet 192.168.192.1/24 scope global lo:1
valid_lft forever preferred_lft forever
$ ip/ip -4 addr show label lo:1
inet 192.168.192.1/24 scope global lo:1
valid_lft forever preferred_lft forever
Note that we no longer show link information as we did previously:
we are filtering by "label" pattern, not showing by "dev".
Fixes: commit 9516823051ce ("ipaddress: Improve print_linkinfo()") Reported-by: Vincent Bernat <vincent@bernat.im> Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
David Ahern [Wed, 18 Jul 2018 02:39:06 +0000 (19:39 -0700)]
Merge branch 'bpf-btf' into iproute2-next
Daniel Borkmann says:
====================
Main part of this set is to: i) avoid strict af_alg kernel dependency,
ii) add loader support for bpf to bpf calls and iii) add btf loader
support with an option to annotate maps. For details please see the
individual patches. Thanks!
Daniel Borkmann [Tue, 17 Jul 2018 23:31:22 +0000 (01:31 +0200)]
bpf: implement btf handling and map annotation
Implement loading of .BTF section from object file and build up
internal table for retrieving key/value id related to maps in
the BPF program. Latter is done by setting up struct btf_type
table.
One of the issues is that there's a disconnect between the data
types used in the map and struct bpf_elf_map, meaning the underlying
types are unknown from the map description. One way to overcome
this is to add a annotation such that the loader will recognize
the relation to both. BPF_ANNOTATE_KV_PAIR(map_foo, struct key,
struct val); has been added to the API that programs can use.
The loader will then pick the corresponding key/value type ids and
attach it to the maps for creation. This can later on be dumped via
bpftool for introspection.
Example with test_xdp_noinline.o from kernel selftests:
Daniel Borkmann [Tue, 17 Jul 2018 23:31:21 +0000 (01:31 +0200)]
bpf: implement bpf to bpf calls support
Implement missing bpf to bpf calls support. The loader will
recognize .text section and handle relocation entries that
are emitted by LLVM.
First step is processing of map related relocation entries
for .text section, and in a second step loader will copy .text
section into program section and adjust call instruction
offset accordingly.
Example with test_xdp_noinline.o from kernel selftests:
1) Every function as __attribute__ ((always_inline)), rest
left unchanged:
# ip -force link set dev lo xdp obj test_xdp_noinline.o sec xdp-test
# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 xdpgeneric/id:233 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
[...]
# bpftool prog dump xlated id 233
[...]
1669: (2d) if r3 > r2 goto pc+4
1670: (79) r2 = *(u64 *)(r10 -136)
1671: (61) r2 = *(u32 *)(r2 +0)
1672: (63) *(u32 *)(r1 +0) = r2
1673: (b7) r0 = 1
1674: (95) exit <-- 1674 insns total
2) Every function as __attribute__ ((noinline)), rest
left unchanged:
Daniel Borkmann [Tue, 17 Jul 2018 23:31:20 +0000 (01:31 +0200)]
bpf: remove strict dependency on af_alg
Do not bail out when AF_ALG is not supported by the kernel and
only do so when a map is requested in object ns where we're
calculating the hash. Otherwise, the loader can operate just
fine, therefore lets not fail early when it's not needed.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David Ahern <dsahern@gmail.com>
David Ahern [Wed, 18 Jul 2018 02:37:50 +0000 (19:37 -0700)]
Import btf.h from kernel headers
Import btf.h from kernel headers at commit 2aa4a3378ad0 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next")
which is the last sync point.
projects / mirror_iproute2.git / log