Commit e941759c74 ("fence: dma-buf cross-device synchronization") added
trace event fence_annotate_wait_on, but never used it. It was renamed
to dma_fence_annotate_wait_on by commit f54d186700 ("dma-buf: Rename
struct fence to dma_fence") but still not used. As defined trace events
have data structures and functions created for them, it is a waste of
memory if they are not used. Remove the unused trace event.
tracing, memcg, vmscan: Hide trace events when not in use
When trace events are defined but not used they still create data
structures and functions for their use, even though nothing may be
using them.
The trace events mm_vmscan_memcg_reclaim_begin,
mm_vmscan_memcg_softlimit_reclaim_begin, mm_vmscan_memcg_reclaim_end,
and mm_vmscan_memcg_softlimit_reclaim_end are not used if CONFIG_MEMCG
is not defined. Do not create these trace events unless CONFIG_MEMCG is
defined.
tracing/xen: Hide events that are not used when X86_PAE is not defined
TRACE_EVENTS() take up memory. If they are defined but not used, then
they simply waste space. If their use case is behind a define, then the
trace events should be as well.
The trace events xen_mmu_set_pte_atomic, xen_mmu_pte_clear, and
xen_mmu_pmd_clear are not used when CONFIG_X86_PAE is not defined.
Arnd Bergmann [Fri, 13 Oct 2017 14:22:20 +0000 (16:22 +0200)]
tracing: mark trace_test_buffer as __maybe_unused
After trace_selftest_startup_sched_switch is removed, trace_test_buffer()
is only used sometimes, leading to this warning:
kernel/trace/trace_selftest.c:62:12: error: 'trace_test_buffer' defined but not used [-Werror=unused-function]
There is no simple #ifdef condition that captures well whether the
function is in fact used or not, so marking it as __maybe_unused is
probably the best way to shut up the warning. The function will then
be silently dropped when there is no user.
printk: Remove superfluous memory barriers from printk_safe
The variable printk_safe_irq_ready is set and never cleared at system
boot up, when there's only one CPU active. It is set before other
CPUs come on line. Also, it is extremely unlikely that an NMI would
trigger this early in boot up (which I wonder why we even have this
variable at all).
Also mark the printk_safe_irq_ready as read mostly, as it is set at
system boot up, and never touched again.
Joel Fernandes [Mon, 9 Oct 2017 19:29:31 +0000 (12:29 -0700)]
ftrace: Clear hashes of stale ips of init memory
Filters should be cleared of init functions during freeing of init
memory when the ftrace dyn records are released. However in current
code, the filters are left as is. This patch clears the hashes of the
saved init functions when the init memory is freed. This fixes the
following issue reproducible with the following sequence of commands for
a test module:
================================================
Commands:
echo '*:mod:test' > /d/tracing/set_ftrace_filter
echo function > /d/tracing/current_tracer
modprobe test
rmmod test
sleep 1
modprobe test
cat /d/tracing/set_ftrace_filter
Behavior without patch: Init function is still in the filter
Expected behavior: Shouldn't have any of the filters set
Joel Fernandes [Tue, 10 Oct 2017 22:51:37 +0000 (15:51 -0700)]
tracing: Add support for preempt and irq enable/disable events
Preempt and irq trace events can be used for tracing the start and
end of an atomic section which can be used by a trace viewer like
systrace to graphically view the start and end of an atomic section and
correlate them with latencies and scheduling issues.
Joel Fernandes [Fri, 6 Oct 2017 00:54:31 +0000 (17:54 -0700)]
tracing: Prepare to add preempt and irq trace events
In preparation of adding irqsoff and preemptsoff enable and disable trace
events, move required functions and code to make it easier to add these events
in a later patch. This patch is just code movement and no functional change. Link: http://lkml.kernel.org/r/20171006005432.14244-2-joelaf@google.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: kernel-team@android.com Signed-off-by: Joel Fernandes <joelaf@google.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
ftrace/kallsyms: Have /proc/kallsyms show saved mod init functions
If a module is loaded while tracing is enabled, then there's a possibility
that the module init functions were traced. These functions have their name
and address stored by ftrace such that it can translate the function address
that is written into the buffer into a human readable function name.
As userspace tools may be doing the same, they need a way to map function
names to their address as well. This is done through reading /proc/kallsyms.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
ftrace: Add freeing algorithm to free ftrace_mod_maps
The ftrace_mod_map is a descriptor to save module init function names in
case they were traced, and the trace output needs to reference the function
name from the function address. But after the function is unloaded, it
the maps should be freed, as the rest of the function names are as well.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
ftrace: Save module init functions kallsyms symbols for tracing
If function tracing is active when the module init functions are freed, then
store them to be referenced by kallsyms. As module init functions can now be
traced on module load, they were useless:
When the output is shown, the kallsyms for the module init functions have
already been freed, and the output of the trace can not convert them to
their function names.
Allow for module init sections to be traced as well as core kernel init
sections. Now that filtering modules functions can be stored, for when they
are loaded, it makes sense to be able to trace them.
Cc: Jessica Yu <jeyu@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
ftrace: Add a ftrace_free_mem() function for modules to use
In order to be able to trace module init functions, the module code needs to
tell ftrace what is being freed when the init sections are freed. Use the
code that the main init calls to tell ftrace to free the main init sections.
This requires passing in a start and end address to free.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Tom Zanussi [Fri, 22 Sep 2017 19:58:23 +0000 (14:58 -0500)]
tracing: Reimplement log2
log2 as currently implemented applies only to u64 trace_event_field
derived fields, and assumes that anything it's applied to is a u64
field.
To prepare for synthetic fields like latencies, log2 should be
applicable to those as well, so take the opportunity now to fix the
current problems as well as expand to more general uses.
log2 should be thought of as a chaining function rather than a field
type. To enable this as well as possible future function
implementations, add a hist_field operand array into the hist_field
definition for this purpose, and make use of it to implement the log2
'function'.
Tom Zanussi [Fri, 22 Sep 2017 19:58:22 +0000 (14:58 -0500)]
tracing: Add hist_field_name() accessor
In preparation for hist_fields that won't be strictly based on
trace_event_fields, add a new hist_field_name() accessor to allow that
flexibility and update associated users.
Tom Zanussi [Fri, 22 Sep 2017 19:58:20 +0000 (14:58 -0500)]
tracing: Make traceprobe parsing code reusable
traceprobe_probes_write() and traceprobe_command() actually contain
nothing that ties them to kprobes - the code is generically useful for
similar types of parsing elsewhere, so separate it out and move it to
trace.c/trace.h.
Other than moving it, the only change is in naming:
traceprobe_probes_write() becomes trace_parse_run_command() and
traceprobe_command() becomes trace_run_command().
Tom Zanussi [Fri, 22 Sep 2017 19:58:18 +0000 (14:58 -0500)]
tracing: Remove lookups from tracing_map hitcount
Lookups inflate the hitcount, making it essentially useless. Only
inserts and updates should really affect the hitcount anyway, so
explicitly filter lookups out.
Tom Zanussi [Fri, 22 Sep 2017 19:58:17 +0000 (14:58 -0500)]
tracing: Exclude 'generic fields' from histograms
There are a small number of 'generic fields' (comm/COMM/cpu/CPU) that
are found by trace_find_event_field() but are only meant for
filtering. Specifically, they unlike normal fields, they have a size
of 0 and thus wreak havoc when used as a histogram key.
Exclude these (return -EINVAL) when used as histogram keys.
ring-buffer: Rewrite trace_recursive_(un)lock() to be simpler
The current method to prevent the ring buffer from entering into a recursize
loop is to use a bitmask and set the bit that maps to the current context
(normal, softirq, irq or NMI), and if that bit was already set, it is
considered a recursive loop.
New code is being added that may require the ring buffer to be entered a
second time in the current context. The recursive locking prevents that from
happening. Instead of mapping a bitmask to the current context, just allow 4
levels of nesting in the ring buffer. This matches the 4 context levels that
it can already nest. It is highly unlikely to have more than two levels,
thus it should be fine when we add the second entry into the ring buffer. If
that proves to be a problem, we can always up the number to 8.
An added benefit is that reading preempt_count() to get the current level
adds a very slight but noticeable overhead. This removes that need.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
tracing: Reverse the order of trace_types_lock and event_mutex
In order to make future changes where we need to call
tracing_set_clock() from within an event command, the order of
trace_types_lock and event_mutex must be reversed, as the event command
will hold event_mutex and the trace_types_lock is taken from within
tracing_set_clock().
Since commit 87d80de2800d087ea833cb79bc13f85ff34ed49f ("tracing: Remove
obsolete sched_switch tracer"), the sched_switch tracer selftest is no longer
used. This patch removes the same.
Linus Torvalds [Sun, 1 Oct 2017 20:55:32 +0000 (13:55 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"This contains the following fixes and improvements:
- Avoid dereferencing an unprotected VMA pointer in the fault signal
generation code
- Fix inline asm call constraints for GCC 4.4
- Use existing register variable to retrieve the stack pointer
instead of forcing the compiler to create another indirect access
which results in excessive extra 'mov %rsp, %<dst>' instructions
- Disable branch profiling for the memory encryption code to prevent
an early boot crash
- Fix a sparse warning caused by casting the __user annotation in
__get_user_asm_u64() away
- Fix an off by one error in the loop termination of the error patch
in the x86 sysfs init code
- Add missing CPU IDs to various Intel specific drivers to enable the
functionality on recent hardware
- More (init) constification in the numachip code"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Use register variable to get stack pointer value
x86/mm: Disable branch profiling in mem_encrypt.c
x86/asm: Fix inline asm call constraints for GCC 4.4
perf/x86/intel/uncore: Correct num_boxes for IIO and IRP
perf/x86/intel/rapl: Add missing CPU IDs
perf/x86/msr: Add missing CPU IDs
perf/x86/intel/cstate: Add missing CPU IDs
x86: Don't cast away the __user in __get_user_asm_u64()
x86/sysfs: Fix off-by-one error in loop termination
x86/mm: Fix fault error path using unsafe vma pointer
x86/numachip: Add const and __initconst to numachip2_clockevent
Linus Torvalds [Sun, 1 Oct 2017 20:03:16 +0000 (13:03 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"This adds a new timer wheel function which is required for the
conversion of the timer callback function from the 'unsigned long
data' argument to 'struct timer_list *timer'. This conversion has two
benefits:
1) It makes struct timer_list smaller
2) Many callers hand in a pointer to the timer or to the structure
containing the timer, which happens via type casting both at setup
and in the callback. This change gets rid of the typecasts.
Once the conversion is complete, which is planned for 4.15, the old
setup function and the intermediate typecast in the new setup function
go away along with the data field in struct timer_list.
Merging this now into mainline allows a smooth queueing of the actual
conversion in the affected maintainer trees without creating
dependencies"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
um/time: Fixup namespace collision
timer: Prepare to change timer callback argument type
Linus Torvalds [Sun, 1 Oct 2017 19:34:42 +0000 (12:34 -0700)]
Merge branch 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull smp/hotplug fixes from Thomas Gleixner:
"This addresses the fallout of the new lockdep mechanism which covers
completions in the CPU hotplug code.
The lockdep splats are false positives, but there is no way to
annotate that reliably. The solution is to split the completions for
CPU up and down, which requires some reshuffling of the failure
rollback handling as well"
* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smp/hotplug: Hotplug state fail injection
smp/hotplug: Differentiate the AP completion between up and down
smp/hotplug: Differentiate the AP-work lockdep class between up and down
smp/hotplug: Callback vs state-machine consistency
smp/hotplug: Rewrite AP state machine core
smp/hotplug: Allow external multi-instance rollback
smp/hotplug: Add state diagram
Linus Torvalds [Sun, 1 Oct 2017 19:10:02 +0000 (12:10 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"The scheduler pull request comes with the following updates:
- Prevent a divide by zero issue by validating the input value of
sysctl_sched_time_avg
- Make task state printing consistent all over the place and have
explicit state characters for IDLE and PARKED so they wont be
displayed as 'D' state which confuses tools"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/sysctl: Check user input value of sysctl_sched_time_avg
sched/debug: Add explicit TASK_PARKED printing
sched/debug: Ignore TASK_IDLE for SysRq-W
sched/debug: Add explicit TASK_IDLE printing
sched/tracing: Use common task-state helpers
sched/tracing: Fix trace_sched_switch task-state printing
sched/debug: Remove unused variable
sched/debug: Convert TASK_state to hex
sched/debug: Implement consistent task-state printing
Linus Torvalds [Sun, 1 Oct 2017 19:06:31 +0000 (12:06 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
- Prevent a division by zero in the perf aux buffer handling
- Sync kernel headers with perf tool headers
- Fix a build failure in the syscalltbl code
- Make the debug messages of perf report --call-graph work correctly
- Make sure that all required perf files are in the MANIFEST for
container builds
- Fix the atrr.exclude kernel handling so it respects the
perf_event_paranoid and the user permissions
- Make perf test on s390x work correctly
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/aux: Only update ->aux_wakeup in non-overwrite mode
perf test: Fix vmlinux failure on s390x part 2
perf test: Fix vmlinux failure on s390x
perf tools: Fix syscalltbl build failure
perf report: Fix debug messages with --call-graph option
perf evsel: Fix attr.exclude_kernel setting for default cycles:p
tools include: Sync kernel ABI headers with tooling headers
perf tools: Get all of tools/{arch,include}/ in the MANIFEST
Linus Torvalds [Sun, 1 Oct 2017 19:02:47 +0000 (12:02 -0700)]
Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"Two fixes for locking:
- Plug a hole the pi_stat->owner serialization which was changed
recently and failed to fixup two usage sites.
- Prevent reordering of the rwsem_has_spinner() check vs the
decrement of rwsem count in up_write() which causes a missed
wakeup"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rwsem-xadd: Fix missed wakeup due to reordering of load
futex: Fix pi_state->owner serialization
Linus Torvalds [Sun, 1 Oct 2017 19:00:56 +0000 (12:00 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
- Add a missing NULL pointer check in free_irq()
- Fix a memory leak/memory corruption in the generic irq chip
- Add missing rcu annotations for radix tree access
- Use ffs instead of fls when extracting data from a chip register in
the MIPS GIC irq driver
- Fix the unmasking of IPI interrupts in the MIPS GIC driver so they
end up at the target CPU and not at CPU0
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irq/generic-chip: Don't replace domain's name
irqdomain: Add __rcu annotations to radix tree accessors
irqchip/mips-gic: Use effective affinity to unmask
irqchip/mips-gic: Fix shifts to extract register fields
genirq: Check __free_irq() return value for NULL
Linus Torvalds [Sun, 1 Oct 2017 18:12:29 +0000 (11:12 -0700)]
Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Thomas Gleixner:
"Two small fixes for objtool:
- Support frame pointer setup via 'lea (%rsp), %rbp' which was not
yet supported and caused build warnings
- Disable unreacahble warnings for GCC4.4 and older to avoid false
positives caused by the compiler itself"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Support unoptimized frame pointer setup
objtool: Skip unreachable warnings for GCC 4.4 and older
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Eight mostly minor fixes for recently discovered issues in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ILLEGAL REQUEST + ASC==27 => target failure
scsi: aacraid: Add a small delay after IOP reset
scsi: scsi_transport_fc: Also check for NOTPRESENT in fc_remote_port_add()
scsi: scsi_transport_fc: set scsi_target_id upon rescan
scsi: scsi_transport_iscsi: fix the issue that iscsi_if_rx doesn't parse nlmsg properly
scsi: aacraid: error: testing array offset 'bus' after use
scsi: lpfc: Don't return internal MBXERR_ERROR code from probe function
scsi: aacraid: Fix 2T+ drives on SmartIOC-2000
Merge tag 'platform-drivers-x86-v4.14-2' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform drivers fix from Darren Hart:
"Newly discovered species of fujitsu laptops break some assumptions
about ACPI device pairings.
fujitsu-laptop: Don't oops when FUJ02E3 is not present"
* tag 'platform-drivers-x86-v4.14-2' of git://git.infradead.org/linux-platform-drivers-x86:
platform/x86: fujitsu-laptop: Don't oops when FUJ02E3 is not presnt
Merge tag 'led_fixes-4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED fixes from Jacek Anaszewski:
"Four fixes for the as3645a LED flash controller and one update to
MAINTAINERS"
* tag 'led_fixes-4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
MAINTAINERS: Add entry for MediaTek PMIC LED driver
as3645a: Unregister indicator LED on device unbind
as3645a: Use integer numbers for parsing LEDs
dt: bindings: as3645a: Use LED number to refer to LEDs
as3645a: Use ams,input-max-microamp as documented in DT bindings
Merge branch 'for-4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"We've collected a bunch of isolated fixes, for crashes, user-visible
behaviour or missing bits from other subsystem cleanups from the past.
The overall number is not small but I was not able to make it
significantly smaller. Most of the patches are supposed to go to
stable"
* 'for-4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: log csums for all modified extents
Btrfs: fix unexpected result when dio reading corrupted blocks
btrfs: Report error on removing qgroup if del_qgroup_item fails
Btrfs: skip checksum when reading compressed data if some IO have failed
Btrfs: fix kernel oops while reading compressed data
Btrfs: use btrfs_op instead of bio_op in __btrfs_map_block
Btrfs: do not backup tree roots when fsync
btrfs: remove BTRFS_FS_QUOTA_DISABLING flag
btrfs: propagate error to btrfs_cmp_data_prepare caller
btrfs: prevent to set invalid default subvolid
Btrfs: send: fix error number for unknown inode types
btrfs: fix NULL pointer dereference from free_reloc_roots()
btrfs: finish ordered extent cleaning if no progress is found
btrfs: clear ordered flag on cleaning up ordered extents
Btrfs: fix incorrect {node,sector}size endianness from BTRFS_IOC_FS_INFO
Btrfs: do not reset bio->bi_ops while writing bio
Btrfs: use the new helper wbc_to_write_flags
Merge tag 'md/4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md
Pull MD fixes from Shaohua Li:
"A few fixes for MD. Mainly fix a problem introduced in 4.13, which we
retry bio for some code paths but not all in some situations"
* tag 'md/4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
md/raid5: cap worker count
dm-raid: fix a race condition in request handling
md: fix a race condition for flush request handling
md: separate request handling
Merge tag 'pci-v4.14-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- fix CONFIG_PCI=n build error (introduced in v4.14-rc1) (Geert
Uytterhoeven)
- fix a race in sysfs driver_override store/show (Nicolai Stange)
* tag 'pci-v4.14-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Fix race condition with driver_override
PCI: Add dummy pci_acs_enabled() for CONFIG_PCI=n build
Merge tag 'drm-fixes-for-v4.14-rc3' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Regular fixes pull, some amdkfd, amdgpu, etnaviv, sun4i, qxl, tegra
fixes.
I've got an outstanding pull for i915 but it wasn't on an rc2 base so
I wanted to ship these out first, I might get to it before rc3 or I
might not"
* tag 'drm-fixes-for-v4.14-rc3' of git://people.freedesktop.org/~airlied/linux:
drm/tegra: trace: Fix path to include
qxl: fix framebuffer unpinning
drm/sun4i: cec: Enable back CEC-pin framework
drm/amdkfd: Print event limit messages only once per process
drm/amdkfd: Fix kernel-queue wrapping bugs
drm/amdkfd: Fix incorrect destroy_mqd parameter
drm/radeon: disable hard reset in hibernate for APUs
drm/amdgpu: revert tile table update for oland
etnaviv: fix gem object list corruption
etnaviv: fix submit error path
qxl: fix primary surface handling
drm/amdkfd: check for null dev to avoid a null pointer dereference
Merge tag 'iommu-fixes-v4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
- A comment fix for 'struct iommu_ops'
- Format string fixes for AMD IOMMU, unfortunatly I missed that during
review.
- Limit mediatek physical addresses to 32 bit for v7s to fix a warning
triggered in io-page-table code.
- Fix dma-sync in io-pgtable-arm-v7s code
* tag 'iommu-fixes-v4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu: Fix comment for iommu_ops.map_sg
iommu/amd: pr_err() strings should end with newlines
iommu/mediatek: Limit the physical address in 32bit for v7s
iommu/io-pgtable-arm-v7s: Need dma-sync while there is no QUIRK_NO_DMA
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- SPsel register initialisation on reset as the architecture defines
its state as unknown
- Use READ_ONCE when dereferencing pmd_t pointers to avoid race
conditions in page_vma_mapped_walk() (or fast GUP) with concurrent
modifications of the page table
- Avoid invoking the mm fault handling code for kernel addresses (check
against TASK_SIZE) which would otherwise result in calling
might_sleep() in atomic context
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: fault: Route pte translation faults via do_translation_fault
arm64: mm: Use READ_ONCE when dereferencing pointer to pte table
arm64: Make sure SPsel is always set
Merge tag 'for-linus-4.14c-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- avoid a warning when compiling with clang
- consider read-only bits in xen-pciback when writing to a BAR
- fix a boot crash of pv-domains
* tag 'for-linus-4.14c-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/mmu: Call xen_cleanhighmap() with 4MB aligned for page tables mapping
xen-pciback: relax BAR sizing write value check
x86/xen: clean up clang build warning
Al Viro [Fri, 29 Sep 2017 17:43:15 +0000 (13:43 -0400)]
fix infoleak in waitid(2)
kernel_waitid() can return a PID, an error or 0. rusage is filled in the first
case and waitid(2) rusage should've been copied out exactly in that case, *not*
whenever kernel_waitid() has not returned an error. Compat variant shares that
braino; none of kernel_wait4() callers do, so the below ought to fix it.
Reported-and-tested-by: Alexander Potapenko <glider@google.com> Fixes: ce72a16fa705 ("wait4(2)/waitid(2): separate copying rusage to userland") Cc: stable@vger.kernel.org # v4.13 Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
x86/asm: Use register variable to get stack pointer value
Currently we use current_stack_pointer() function to get the value
of the stack pointer register. Since commit:
f5caf621ee35 ("x86/asm: Fix inline asm call constraints for Clang")
... we have a stack register variable declared. It can be used instead of
current_stack_pointer() function which allows to optimize away some
excessive "mov %rsp, %<dst>" instructions:
Tom Lendacky [Fri, 29 Sep 2017 16:24:19 +0000 (11:24 -0500)]
x86/mm: Disable branch profiling in mem_encrypt.c
Some routines in mem_encrypt.c are called very early in the boot process,
e.g. sme_encrypt_kernel(). When CONFIG_TRACE_BRANCH_PROFILING=y is defined
the resulting branch profiling associated with the check to see if SME is
active results in a kernel crash. Disable branch profiling for
mem_encrypt.c by defining DISABLE_BRANCH_PROFILING before including any
header files.
Reported-by: kernel test robot <lkp@01.org> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Acked-by: Borislav Petkov <bp@suse.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170929162419.6016.53390.stgit@tlendack-t1.amdoffice.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
Merge branch 'fixes-v4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull keys fixes from James Morris:
"Notable here is a rewrite of big_key crypto by Jason Donenfeld to
address some issues in the original code.
From Jason's commit log:
"This started out as just replacing the use of crypto/rng with
get_random_bytes_wait, so that we wouldn't use bad randomness at
boot time. But, upon looking further, it appears that there were
even deeper underlying cryptographic problems, and that this seems
to have been committed with very little crypto review. So, I rewrote
the whole thing, trying to keep to the conventions introduced by the
previous author, to fix these cryptographic flaws."
There has been positive review of the new code by Eric Biggers and
Herbert Xu, and it passes basic testing via the keyutils test suite.
Eric also manually tested it.
Generally speaking, we likely need to improve the amount of crypto
review for kernel crypto users including keys (I'll post a note
separately to ksummit-discuss)"
* 'fixes-v4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
security/keys: rewrite all of big_key crypto
security/keys: properly zero out sensitive key material in big_key
KEYS: use kmemdup() in request_key_auth_new()
KEYS: restrict /proc/keys by credentials at open time
KEYS: reset parent each time before searching key_user_tree
KEYS: prevent KEYCTL_READ on negative key
KEYS: prevent creating a different user's keyrings
KEYS: fix writing past end of user-supplied buffer in keyring_read()
KEYS: fix key refcount leak in keyctl_read_key()
KEYS: fix key refcount leak in keyctl_assume_authority()
KEYS: don't revoke uninstantiated key in request_key_auth_new()
KEYS: fix cred refcount leak in request_key_auth_new()
Will Deacon [Fri, 29 Sep 2017 11:27:41 +0000 (12:27 +0100)]
arm64: fault: Route pte translation faults via do_translation_fault
We currently route pte translation faults via do_page_fault, which elides
the address check against TASK_SIZE before invoking the mm fault handling
code. However, this can cause issues with the path walking code in
conjunction with our word-at-a-time implementation because
load_unaligned_zeropad can end up faulting in kernel space if it reads
across a page boundary and runs into a page fault (e.g. by attempting to
read from a guard region).
In the case of such a fault, load_unaligned_zeropad has registered a
fixup to shift the valid data and pad with zeroes, however the abort is
reported as a level 3 translation fault and we dispatch it straight to
do_page_fault, despite it being a kernel address. This results in calling
a sleeping function from atomic context:
Will Deacon [Fri, 29 Sep 2017 10:29:55 +0000 (11:29 +0100)]
arm64: mm: Use READ_ONCE when dereferencing pointer to pte table
On kernels built with support for transparent huge pages, different CPUs
can access the PMD concurrently due to e.g. fast GUP or page_vma_mapped_walk
and they must take care to use READ_ONCE to avoid value tearing or caching
of stale values by the compiler. Unfortunately, these functions call into
our pgtable macros, which don't use READ_ONCE, and compiler caching has
been observed to cause the following crash during ext4 writeback:
This is because page_vma_mapped_walk loads the PMD twice before calling
pte_offset_map: the first time without READ_ONCE (where it gets all zeroes
due to a concurrent pmdp_invalidate) and the second time with READ_ONCE
(where it sees a valid table pointer due to a concurrent pmd_populate).
However, the compiler inlines everything and caches the first value in
a register, which is subsequently used in pte_offset_phys which returns
a junk pointer that is later dereferenced when attempting to access the
relevant pte.
This patch fixes the issue by using READ_ONCE in pte_offset_phys to ensure
that a stale value is not used. Whilst this is a point fix for a known
failure (and simple to backport), a full fix moving all of our page table
accessors over to {READ,WRITE}_ONCE and consistently using READ_ONCE in
page_vma_mapped_walk is in the works for a future kernel release.
Cc: Jon Masters <jcm@redhat.com> Cc: Timur Tabi <timur@codeaurora.org> Cc: <stable@vger.kernel.org> Fixes: f27176cfc363 ("mm: convert page_mkclean_one() to use page_vma_mapped_walk()") Tested-by: Richard Ruigrok <rruigrok@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This happened when the host hit a page fault, and delivered it as in an
async page fault, while the guest was in an RCU read-side critical
section. The guest then tries to reschedule in kvm_async_pf_task_wait(),
but rcu_preempt_note_context_switch() would treat the reschedule as a
sleep in RCU read-side critical section, which is not allowed (even in
preemptible RCU). Thus the WARN.
To cure this, make kvm_async_pf_task_wait() go to the halt path if the
PF happens in a RCU read-side critical section.
Reported-by: Sasha Levin <levinsasha928@gmail.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A nested #PF is triggered during L0 emulating instruction for L2. However, it
doesn't consider we should not break L1's vmlauch/vmresme. This patch fixes
it by queuing the #PF exception instead ,requesting an immediate VM exit from
L2 and keeping the exception for L1 pending for a subsequent nested VM exit.
This should actually work all the time, making vmx_inject_page_fault_nested
totally unnecessary. However, that's not working yet, so this patch can work
around the issue in the meanwhile.
Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
update_group_capacity()
update_cpu_capacity()
scale_rt_capacity()
{
...
total = sched_avg_period() + delta;
used = div_u64(avg, total);
...
}
To fix this issue, check user input value of sysctl_sched_time_avg, keep
it unchanged when hitting invalid input, and set the minimum limit of
sysctl_sched_time_avg to 1 ms.
Despite the absurdity of it backing up and restoring the stack pointer
for no reason, the bug is actually the fact that it's only backing up
and restoring the lower 32 bits of the stack pointer. The upper 32 bits
are getting cleared out, corrupting the stack pointer.
So change the '__asm_call_sp' register variable to be associated with
the actual full-size stack pointer.
This also requires changing the __ASM_SEL() macro to be based on the
actual compiled arch size, rather than the CONFIG value, because
CONFIG_X86_64 compiles some files with '-m32' (e.g., realmode and vdso).
Otherwise Clang fails to build the kernel because it complains about the
use of a 64-bit register (RSP) in a 32-bit file.
Reported-and-Bisected-and-Tested-by: kernel test robot <xiaolong.ye@intel.com> Diagnosed-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: LKP <lkp@01.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: f5caf621ee35 ("x86/asm: Fix inline asm call constraints for Clang") Link: http://lkml.kernel.org/r/20170928215826.6sdpmwtkiydiytim@treble Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Fri, 22 Sep 2017 16:37:28 +0000 (18:37 +0200)]
sched/debug: Add explicit TASK_PARKED printing
Currently TASK_PARKED is masqueraded as TASK_INTERRUPTIBLE, give it
its own print state because it will not in fact get woken by regular
wakeups and is a long-term state.
This requires moving TASK_PARKED into the TASK_REPORT mask, and since
that latter needs to be a contiguous bitmask, we need to shuffle the
bits around a bit.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Fri, 22 Sep 2017 16:30:40 +0000 (18:30 +0200)]
sched/debug: Add explicit TASK_IDLE printing
Markus reported that kthreads that idle using TASK_IDLE instead of
TASK_INTERRUPTIBLE are reported in as TASK_UNINTERRUPTIBLE and things
like htop mark those red.
This is undesirable, so add an explicit state for TASK_IDLE.
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
locking/rwsem-xadd: Fix missed wakeup due to reordering of load
If a spinner is present, there is a chance that the load of
rwsem_has_spinner() in rwsem_wake() can be reordered with
respect to decrement of rwsem count in __up_write() leading
to wakeup being missed:
Reordering of atomic_long_sub_return_release() in __up_write()
and rwsem_has_spinner() in rwsem_wake() can cause missing of
wakeup in up_write() context. In spinning writer, sem->count
and local variable count is 0XFFFFFFFE00000001. It would result
in rwsem_try_write_lock() failing to acquire rwsem and spinning
writer going to sleep in rwsem_down_write_failed().
The smp_rmb() will make sure that the spinner state is
consulted after sem->count is updated in up_write context.
Convert trace_sched_switch to use the common task-state helpers and
fix the "X" and "Z" order, possibly they ended up in the wrong order
because TASK_REPORT has them in the wrong order too.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
perf/aux: Only update ->aux_wakeup in non-overwrite mode
The following commit:
d9a50b0256 ("perf/aux: Ensure aux_wakeup represents most recent wakeup index")
changed the AUX wakeup position calculation to rounddown(), which causes
a division-by-zero in AUX overwrite mode (aka "snapshot mode").
The zero denominator results from the fact that perf record doesn't set
aux_watermark to anything, in which case the kernel will set it to half
the AUX buffer size, but only for non-overwrite mode. In the overwrite
mode aux_watermark stays zero.
The good news is that, AUX overwrite mode, wakeups don't happen and
related bookkeeping is not relevant, so we can simply forego the whole
wakeup updates.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/20170906160811.16510-1-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dave Airlie [Fri, 29 Sep 2017 07:11:04 +0000 (17:11 +1000)]
Merge tag 'drm-misc-fixes-2017-09-28-1' of git://anongit.freedesktop.org/git/drm-misc into drm-fixes
Driver Changes:
- qxl: fix primary surface and fb unpinning (Gerd)
- sun41: fix CEC_PIN config gate now that media has been merged (Hans)
- tegra: fix TRACE_INCLUDE_PATH (Thierry)
Cc: Thierry Reding <treding@nvidia.com> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Gerd Hoffmann <kraxel@redhat.com>
* tag 'drm-misc-fixes-2017-09-28-1' of git://anongit.freedesktop.org/git/drm-misc:
drm/tegra: trace: Fix path to include
qxl: fix framebuffer unpinning
drm/sun4i: cec: Enable back CEC-pin framework
qxl: fix primary surface handling
Merge tag 'pm-4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a deadlock in the operating performance points (OPP)
framework introduced during the 4.11 cycle, more issues with duplicate
device objects for cpufreq-dt and cpufreq documentation.
Specifics:
- Fix a deadlock in the operating performance points (OPP) framework
caused by a notifier callback taking a lock that's already held by
its caller (Viresh Kumar).
- Prevent the ti-cpufreq and cpufreq-dt-platdev drivers from
attempting to register conflicting device objects which triggers a
warning from sysfs (Suniel Mahesh).
- Drop a stale reference to a piece of intel_pstate documentation
that's not in the tree any more (Rafael Wysocki)"
* tag 'pm-4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: docs: Drop intel-pstate.txt from index.txt
cpufreq: dt: Fix sysfs duplicate filename creation for platform-device
PM / OPP: Call notifier without holding opp_table->lock
Merge tag 'xfs-4.14-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
- fix various problems with the copy-on-write extent maps getting freed
at the wrong time
- fix printk format specifier problems
- report zeroing operation outcomes instead of dropping them on the
floor
- fix some crashes when dio operations partially fail
- fix a race condition between unwritten extent conversion & dio read
- fix some incorrect tests in the inode log item processing
- correct the delayed allocation space reservations on rmap filesystems
- fix some problems checking for dax support
* tag 'xfs-4.14-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: revert "xfs: factor rmap btree size into the indlen calculations"
xfs: Capture state of the right inode in xfs_iflush_done
xfs: perag initialization should only touch m_ag_max_usable for AG 0
xfs: update i_size after unwritten conversion in dio completion
iomap_dio_rw: Allocate AIO completion queue before submitting dio
xfs: validate bdev support for DAX inode flag
xfs: remove redundant re-initialization of total_nr_pages
xfs: Output warning message when discard option was enabled even though the device does not support discard
xfs: report zeroed or not correctly in xfs_zero_range()
xfs: kill meaningless variable 'zero'
fs/xfs: Use %pS printk format for direct addresses
xfs: evict CoW fork extents when performing finsert/fcollapse
xfs: don't unconditionally clear the reflink flag on zero-block files
It turns out that the "legacy" users aren't so legacy at all, and that
turning off the legacy ioctl will break the current Qt bluetooth stack
for bluetooth LE devices that were released just a couple of months ago.
So it's simply not true that this was a legacy interface that hasn't
been needed and is only limited to old legacy BT devices. Because I
actually read Kconfig help messages, and actively try to turn off
features that I don't need, I turned the option off.
Then I spent _way_ too much time debugging BLE issues until I realized
that it wasn't the Qt and subsurface development that had broken one of
my dive computer BLE downloads, but simply my broken kernel config.
Maybe in a decade it will be true that this is a legacy interface. And
maybe with a better help-text and correct dependencies, this kind of
legacy removal might be acceptable. But as things are right now both
the commit message and the Kconfig help text were misleading, and the
Kconfig option had the wrong dependenencies.
There's no reason to keep that broken Kconfig option in the tree.
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma fixes from Doug Ledford:
"Second -rc update for 4.14.
Both Mellanox and Intel had a series of -rc fixes that landed this
week. The Mellanox bunch is spread throughout the stack and not just
in their driver, where as the Intel bunch was mostly in the hfi1
driver. And, several of the fixes in the hfi1 driver were more than
just simple 5 line fixes. As a result, the hfi1 driver fixes has a
sizable LOC count.
Everything else is as one would expect in an RC cycle in terms of LOC
count. One item that might jump out and make you think "That's not an
rc item" is the fix that corrects a typo. But, that change fixes a
typo in a user visible API that was just added in this merge window,
so if we fix it now, we can fix it. If we don't, the typo is in the
API forever. Another that might not appear to be a fix at first glance
is the Simplify mlx5_ib_cont_pages patch, but the simplification
allows them to fix a bug in the existing function whenever the length
of an SGE exceeded page size. We also had to revert one patch from the
merge window that was wrong.
Summary:
- a few core fixes
- a few ipoib fixes
- a few mlx5 fixes
- a 7-patch hfi1 related series"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
IB/hfi1: Unsuccessful PCIe caps tuning should not fail driver load
IB/hfi1: On error, fix use after free during user context setup
Revert "IB/ipoib: Update broadcast object if PKey value was changed in index 0"
IB/hfi1: Return correct value in general interrupt handler
IB/hfi1: Check eeprom config partition validity
IB/hfi1: Only reset QSFP after link up and turn off AOC TX
IB/hfi1: Turn off AOC TX after offline substates
IB/mlx5: Fix NULL deference on mlx5_ib_update_xlt failure
IB/mlx5: Simplify mlx5_ib_cont_pages
IB/ipoib: Fix inconsistency with free_netdev and free_rdma_netdev
IB/ipoib: Fix sysfs Pkey create<->remove possible deadlock
IB: Correct MR length field to be 64-bit
IB/core: Fix qp_sec use after free access
IB/core: Fix typo in the name of the tag-matching cap struct
Merge tag 'seccomp-v4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp fix from Kees Cook:
"Fix refcounting bug in CRIU interface, noticed by Chris Salls (Oleg &
Tycho)"
* tag 'seccomp-v4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
seccomp: fix the usage of get/put_seccomp_filter() in seccomp_get_filter()
Thomas Richter [Fri, 15 Sep 2017 07:14:03 +0000 (09:14 +0200)]
perf test: Fix vmlinux failure on s390x
On s390x perf test 1 failed. It turned out that commit 4a084ecfc821
("perf report: Fix module symbol adjustment for s390x") was incorrect.
The previous implementation in dso__load_sym() is also suitable for
s390x.
timer: Prepare to change timer callback argument type
Modern kernel callback systems pass the structure associated with a
given callback to the callback function. The timer callback remains one
of the legacy cases where an arbitrary unsigned long argument continues
to be passed as the callback argument. This has several problems:
- This bloats the timer_list structure with a normally redundant
.data field.
- No type checking is being performed, forcing callbacks to do
explicit type casts of the unsigned long argument into the object
that was passed, rather than using container_of(), as done in most
of the other callback infrastructure.
- Neighboring buffer overflows can overwrite both the .function and
the .data field, providing attackers with a way to elevate from a buffer
overflow into a simplistic ROP-like mechanism that allows calling
arbitrary functions with a controlled first argument.
- For future Control Flow Integrity work, this creates a unique function
prototype for timer callbacks, instead of allowing them to continue to
be clustered with other void functions that take a single unsigned long
argument.
This adds a new timer initialization API, which will ultimately replace
the existing setup_timer(), setup_{deferrable,pinned,etc}_timer() family,
named timer_setup() (to mirror hrtimer_setup(), making instances of its
use much easier to grep for).
In order to support the migration of existing timers into the new
callback arguments, timer_setup() casts its arguments to the existing
legacy types, and explicitly passes the timer pointer as the legacy
data argument. Once all setup_*timer() callers have been replaced with
timer_setup(), the casts can be removed, and the data argument can be
dropped with the timer expiration code changed to just pass the timer
to the callback directly.
Since the regular pattern of using container_of() during local variable
declaration repeats the need for the variable type declaration
to be included, this adds a helper modeled after other from_*()
helpers that wrap container_of(), named from_timer(). This helper uses
typeof(*variable), removing the type redundancy and minimizing the need
for line wraps in forthcoming conversions from "unsigned data long" to
"struct timer_list *" in the timer callbacks:
Finally, in order to support the handful of timer users that perform
open-coded assignments of the .function (and .data) fields, provide
cast macros (TIMER_FUNC_TYPE and TIMER_DATA_TYPE) that can be used
temporarily. Once conversion has been completed, these can be globally
trivially removed.
xen/mmu: Call xen_cleanhighmap() with 4MB aligned for page tables mapping
When bootup a PVM guest with large memory(Ex.240GB), XEN provided initial
mapping overlaps with kernel module virtual space. When mapping in this space
is cleared by xen_cleanhighmap(), in certain case there could be an 2MB mapping
left. This is due to XEN initialize 4MB aligned mapping but xen_cleanhighmap()
finish at 2MB boundary.
When module loading is just on top of the 2MB space, got below warning:
Jan Beulich [Mon, 25 Sep 2017 08:01:01 +0000 (02:01 -0600)]
xen-pciback: relax BAR sizing write value check
Just like done in d2bd05d88d ("xen-pciback: return proper values during
BAR sizing") for the ROM BAR, ordinary ones also shouldn't compare the
written value directly against ~0, but consider the r/o bits at the
bottom (if any).
Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
When generic irq chips are allocated for an irq domain the domain name is
set to the irq chip name. That was done to have named domains before the
recent changes which enforce domain naming were done.
Since then the overwrite causes a memory leak when the domain name is
dynamically allocated and even worse it would cause the domain free code to
free the wrong name pointer, which might point to a constant.
seccomp: fix the usage of get/put_seccomp_filter() in seccomp_get_filter()
As Chris explains, get_seccomp_filter() and put_seccomp_filter() can end
up using different filters. Once we drop ->siglock it is possible for
task->seccomp.filter to have been replaced by SECCOMP_FILTER_FLAG_TSYNC.
Fixes: f8e529ed941b ("seccomp, ptrace: add support for dumping seccomp filters") Reported-by: Chris Salls <chrissalls5@gmail.com> Cc: stable@vger.kernel.org # needs s/refcount_/atomic_/ for v4.12 and earlier Signed-off-by: Oleg Nesterov <oleg@redhat.com>
[tycho: add __get_seccomp_filter vs. open coding refcount_inc()] Signed-off-by: Tycho Andersen <tycho@docker.com>
[kees: tweak commit log] Signed-off-by: Kees Cook <keescook@chromium.org>
crypto/jitterentropy.o: warning: objtool: jent_fold_time()+0x3b: call without frame pointer save/setup
crypto/jitterentropy.o: warning: objtool: jent_stuck()+0x1d: call without frame pointer save/setup
crypto/jitterentropy.o: warning: objtool: jent_unbiased_bit()+0x15: call without frame pointer save/setup
crypto/jitterentropy.o: warning: objtool: jent_read_entropy()+0x32: call without frame pointer save/setup
crypto/jitterentropy.o: warning: objtool: jent_entropy_collector_free()+0x19: call without frame pointer save/setup
and
arch/x86/events/core.o: warning: objtool: collect_events uses BP as a scratch register
arch/x86/events/core.o: warning: objtool: events_ht_sysfs_show()+0x22: call without frame pointer save/setup
With certain rare configurations, GCC sometimes sets up the frame
pointer with:
lea (%rsp),%rbp
instead of:
mov %rsp,%rbp
The instructions are equivalent, so treat the former like the latter.
Shaohua Li [Thu, 21 Sep 2017 17:23:35 +0000 (10:23 -0700)]
md: separate request handling
With commit cc27b0c78c79, pers->make_request could bail out without handling
the bio. If that happens, we should retry. The commit fixes md_make_request
but not other call sites. Separate the request handling part, so other call
sites can use it.
Reported-by: Nate Dailey <nate.dailey@stratus.com>
Fix: cc27b0c78c79(md: fix deadlock between mddev_suspend() and md_write_start()) Cc: stable@vger.kernel.org Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
Martin Wilck [Wed, 27 Sep 2017 12:44:19 +0000 (14:44 +0200)]
scsi: ILLEGAL REQUEST + ASC==27 => target failure
ASC 0x27 is "WRITE PROTECTED". This error code is returned e.g. by
Fujitsu ETERNUS systems under certain conditions for WRITE SAME 16
commands with UNMAP bit set. It should not be treated as a path
error. In general, it makes sense to assume that being write protected
is a target rather than a path property.
Signed-off-by: Martin Wilck <mwilck@suse.com> Acked-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 0e9973ed3382 ("scsi: aacraid: Add periodic checks to see IOP reset
status") changed the way driver checks if a reset succeeded. Now, after an
IOP reset, aacraid immediately start polling a register to verify the reset
is complete.
This behavior cause regressions on the reset path in PowerPC (at least).
Since the delay after the IOP reset was removed by the aforementioned patch,
the fact driver just starts to read a register instantly after the reset
was issued (by writing in another register) "corrupts" the reset procedure,
which ends up failing all the time.
The issue highly impacted kdump on PowerPC, since on kdump path we
proactively issue a reset in adapter (through the reset_devices kernel
parameter).
This patch (re-)adds a delay right after IOP reset is issued. Empirically
we measured that 3 seconds is enough, but for safety reasons we delay
for 5s (and since it was 30s before, 5s is still a small amount).
For reference, without this patch we observe the following messages
on kdump kernel boot process:
Fixes: 0e9973ed3382 ("scsi: aacraid: Add periodic checks to see IOP reset status") Cc: stable@vger.kernel.org # v4.13+ Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Acked-by: Dave Carroll <david.carroll@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
cpufreq: docs: Drop intel-pstate.txt from index.txt
Commit 33fc30b47098 (cpufreq: intel_pstate: Document the current
behavior and user interface) dropped the intel-pstate.txt file
from Documentation/cpu-freq/, but it did not update the index.txt
file in there accordingly, so do that now.
Fixes: 33fc30b47098 (cpufreq: intel_pstate: Document the current behavior and user interface) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tyler Baicar [Mon, 28 Aug 2017 16:53:41 +0000 (10:53 -0600)]
ACPI / APEI: clear error status before acknowledging the error
Currently we acknowledge errors before clearing the error status.
This could cause a new error to be populated by firmware in-between
the error acknowledgment and the error status clearing which would
cause the second error's status to be cleared without being handled.
So, clear the error status before acknowledging the errors.
Also, make sure to acknowledge the error if the error status read
fails.
Signed-off-by: Tyler Baicar <tbaicar@codeaurora.org> Reviewed-by: Borislav Petkov <bp@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Dave Airlie [Wed, 27 Sep 2017 19:49:38 +0000 (05:49 +1000)]
Merge branch 'drm-fixes-4.14' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
A few fixes for 4.14. Nothing too major.
* 'drm-fixes-4.14' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: disable hard reset in hibernate for APUs
drm/amdgpu: revert tile table update for oland
Dave Airlie [Wed, 27 Sep 2017 19:47:39 +0000 (05:47 +1000)]
Merge tag 'drm-amdkfd-fixes-2017-09-24' of git://people.freedesktop.org/~gabbayo/linux into drm-fixes
It contains the following fixes:
- correct checking of return value
- send correct parameter to function (According to the parameter type)
- avoid spamming of dmesg log
- fix queue wrapping calculations
* tag 'drm-amdkfd-fixes-2017-09-24' of git://people.freedesktop.org/~gabbayo/linux:
drm/amdkfd: Print event limit messages only once per process
drm/amdkfd: Fix kernel-queue wrapping bugs
drm/amdkfd: Fix incorrect destroy_mqd parameter
drm/amdkfd: check for null dev to avoid a null pointer dereference
projects / mirror_ubuntu-bionic-kernel.git / log