Sarita Patra [Mon, 9 Mar 2020 06:23:16 +0000 (23:23 -0700)]
pimd: add flags in show ip mroute command
S - Sparse Mode
C - indicates there is a member of the group directly connected to the router.
R -set on an (S, G) by the receipt of an (S, G) RP bit prune message.
F -This indicates that this router is a FHR and send register messages to RP to inform RP of this active source
P - OIL list is NULL. That means the router will send a prune.
T - At least one packet received via SPT.
Donatas Abraitis [Sun, 15 Mar 2020 12:19:11 +0000 (14:19 +0200)]
bgpd: Add subcodes for BGP Finite State Machine Error
Implement https://tools.ietf.org/html/rfc6608
I used python scapy library to send a notification message in OpenSent state:
```
send(IP(dst="192.168.0.1")/TCP(sport=sp,
dport=179,
seq=rec.ack,
ack=rec.seq + 1,
flags=0x18)/BGPHeader(type=3)/BGPNotification(error_code=4,
error_subcode=0))
```
Logs from FRR:
```
%NOTIFICATION: sent to neighbor 192.168.0.2 5/1 (Neighbor Events Error/Receive Unexpected Message in OpenSent State) 0 bytes
```
saravanank [Mon, 16 Mar 2020 02:36:33 +0000 (19:36 -0700)]
pimd: moving the route_unlock_node outside debug function
Problem: Route node is not de referenced after search when pim debug events are
not enabled when pim_rp_find_match_group is called. So this memory will not get
released when route node is deleted after hitting this path.
RCA: Dereferencing is done inside debug condition.
Fix: Moving outside debug condition
Signed-off-by: Saravanan K <saravanank@vmware.com>
Philippe Guibert [Tue, 10 Mar 2020 08:20:09 +0000 (09:20 +0100)]
bgpd: upon reconfiguration or bgp exchange failure, stop bfd.
When bgp is updated with local source, the bgp session is reset; bfd
also must be reset. The bgp_stop() handler handles all kind of
unexpected failures, so the placeholder to deregister from bfd should be
ok, providing that when bgp establishes, a similar function in bgp will
recreate bfd context.
Note that the bfd session is not reset on one specific case, where BFD
down event is the last reset. In that case, we must let BFD to monitor
the link.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Sarita Patra [Mon, 9 Mar 2020 07:00:28 +0000 (00:00 -0700)]
pimd: Don't refresh mroute_creation for kernel-installed mroute
Issue: When any interface is getting added/deleted in the outgoing
interface list, it calls pim_mroute_add() which is updating the
mroute_creation time without checking if the mroute is already
installed in the kernel.
Fix: Check if mroute is already installed, then dont refresh the
mroute_creation timer.
Naveen Naidu [Wed, 11 Mar 2020 18:20:41 +0000 (23:50 +0530)]
zebra/rt_netlink.c: Clean is_selfroute function
The return type of is_selfroute function is changed from int to bool.
Also remove the redundant invoking of the is_selfroute function in the
calling function netlink_route_change_read_unicast
Donald Sharp [Wed, 11 Mar 2020 13:03:17 +0000 (09:03 -0400)]
ldpd: During code inspection we are mixing data sizes
As I understand it ldpd was originally developed as a standalone
daemon for *BSD land. Then ported to FRR. FRR uses ifindex_t
as the base type for the ifindex. Mixing `unsigned short` and
`int` and `unsigned int` is going to lead to fun somewhere
along the way. Especially when we get to run on a system
with ifindex churn( I'm looking at you docker ).
Attempt to convert all of ldpd to think of the ifindex as a
`ifindex_t`.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ruben Kerkhof [Wed, 11 Mar 2020 09:37:37 +0000 (10:37 +0100)]
isisd: fix a bunch of build warnings with GCC 10
GCC 10 thinks we memcpy into a 0-sized array (which we're not).
Use a C99 flexible array member instead.
Fixes:
CC lib/stream.lo
lib/stream.c: In function ‘stream_put_in_addr’:
lib/stream.c:824:2: warning: writing 4 bytes into a region of size 0 [-Wstringop-overflow=]
824 | memcpy(s->data + s->endp, addr, sizeof(uint32_t));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
isisd/isis_tlvs.c: In function ‘auth_validator_hmac_md5’:
isisd/isis_tlvs.c:4279:2: warning: writing 16 bytes into a region of size 0 [-Wstringop-overflow=]
4279 | memcpy(STREAM_DATA(stream) + auth->offset, auth->value, 16);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘update_auth_hmac_md5’,
inlined from ‘update_auth’ at isisd/isis_tlvs.c:3734:4,
inlined from ‘isis_pack_tlvs’ at isisd/isis_tlvs.c:3897:2:
isisd/isis_tlvs.c:3722:2: warning: writing 16 bytes into a region of size 0 [-Wstringop-overflow=]
3722 | memcpy(STREAM_DATA(s) + auth->offset, digest, 16);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
isisd/isis_tlvs.c:3722:2: warning: writing 16 bytes into a region of size 0 [-Wstringop-overflow=]
bgpd: Fix router-id update handling for route-leaking
If the default BGP instance is importing routes from another instance and
the latter has a router-id update, the update handler needs to handle the
default instance in a special way.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com> Reviewed-by: Chirag Shah <chirag@cumulusnetworks.com> Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Ticket: CM-26007
Reviewed By: CCR-9108
Testing Done: Detailed verification in 3.x
bgpd: Ensure NHT registration is not attempted for peer-group
Ensure that the late registration for NHT done for IPv4 route exchange
over IPv6 GUA peering is not attempted for peer-groups, only for peers.
Fixes: "bgpd: Late registration of Extended Nexthop" Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com> Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Chirag Shah [Wed, 27 Mar 2019 01:23:58 +0000 (18:23 -0700)]
zebra: add debug in specific neigh fetch
add debug trace in specific neigh request send api
to help debug an issue where synchronous response parse
returns with NLMSG_DONE where there is no ipv6 neigh received.
the count value is set to 1 because the request contained
a spcific neigh.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Philippe Guibert [Tue, 10 Mar 2020 13:34:36 +0000 (14:34 +0100)]
bgpd: reset bfd session when bgp comes up
This scenario has been seen against microtik virtual machine with bfd
enabled. When remote microtik bgp reestablishes the bgp session after a
bgp reset, the bgp establishment comes first, then bfd is initialising.
The second point is true for microtik, but not for frrouting, as the
frrouting, when receiving bfd down messages, is not at init state.
Actually, bfd state is up, and sees the first bfd down packet from bfd
as an issue. Consequently, the BGP session is cleared.
The fix consists in resetting the BFD session, once BGP comes up. That
permits to align state machines of both local and remote bfd.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Philippe Guibert [Tue, 10 Mar 2020 08:20:09 +0000 (09:20 +0100)]
bgpd: upon reconfiguration or bgp exchange failure, stop bfd.
When bgp is updated with local source, the bgp session is reset; bfd
also must be reset. The bgp_stop() handler handles all kind of
unexpected failures, so the placeholder to deregister from bfd should be
ok, providing that when bgp establishes, a similar function in bgp will
recreate bfd context.
Note that the bfd session is not reset on one specific case, where BFD
down event is the last reset. In that case, we must let BFD to monitor
the link.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Mark Stapp [Thu, 5 Mar 2020 19:06:46 +0000 (14:06 -0500)]
lib, *: add a common time interval formatting api
Add a common api that formats a time interval into a string
with different output for short and longer intervals. We do
this in several places, for cli/ui output.
projects / mirror_frr.git / log