]> git.proxmox.com Git - mirror_ubuntu-kernels.git/log
mirror_ubuntu-kernels.git
2 years agoMerge tag 'drm-fixes-2022-04-23' of git://anongit.freedesktop.org/drm/drm
Linus Torvalds [Sat, 23 Apr 2022 16:57:30 +0000 (09:57 -0700)]
Merge tag 'drm-fixes-2022-04-23' of git://anongit.freedesktop.org/drm/drm

Pull more drm fixes from Dave Airlie:
 "Maarten was away, so Maxine stepped up and sent me the drm-fixes
  merge, so no point leaving it for another week.

  The big change is an OF revert around bridge/panels, it may have some
  driver fallout, but hopefully this revert gets them shook out in the
  next week easier.

  Otherwise it's a bunch of locking/refcounts across drivers, a radeon
  dma_resv logic fix and some raspberry pi panel fixes.

  panel:
   - revert of patch that broke panel/bridge issues

  dma-buf:
   - remove unused header file.

  amdgpu:
   - partial revert of locking change

  radeon:
   - fix dma_resv logic inversion

  panel:
   - pi touchscreen panel init fixes

  vc4:
   - build fix
   - runtime pm refcount fix

  vmwgfx:
   - refcounting fix"

* tag 'drm-fixes-2022-04-23' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu: partial revert "remove ctx->lock" v2
  Revert "drm: of: Lookup if child node has panel or bridge"
  Revert "drm: of: Properly try all possible cases for bridge/panel detection"
  drm/vc4: Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage
  drm/vmwgfx: Fix gem refcounting and memory evictions
  drm/vc4: Fix build error when CONFIG_DRM_VC4=y && CONFIG_RASPBERRYPI_FIRMWARE=m
  drm/panel/raspberrypi-touchscreen: Initialise the bridge in prepare
  drm/panel/raspberrypi-touchscreen: Avoid NULL deref if not initialised
  dma-buf-map: remove renamed header file
  drm/radeon: fix logic inversion in radeon_sync_resv

2 years agoMerge tag 'input-for-v5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 23 Apr 2022 16:52:07 +0000 (09:52 -0700)]
Merge tag 'input-for-v5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:

 - a new set of keycodes to be used by marine navigation systems

 - minor fixes to omap4-keypad and cypress-sf drivers

* tag 'input-for-v5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: add Marine Navigation Keycodes
  Input: omap4-keypad - fix pm_runtime_get_sync() error checking
  Input: cypress-sf - register a callback to disable the regulators

2 years agoMerge tag 'block-5.18-2022-04-22' of git://git.kernel.dk/linux-block
Linus Torvalds [Sat, 23 Apr 2022 16:46:44 +0000 (09:46 -0700)]
Merge tag 'block-5.18-2022-04-22' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
 "Just two small regression fixes for bcache"

* tag 'block-5.18-2022-04-22' of git://git.kernel.dk/linux-block:
  bcache: fix wrong bdev parameter when calling bio_alloc_clone() in do_bio_hook()
  bcache: put bch_bio_map() back to correct location in journal_write_unlocked()

2 years agoMerge tag 'io_uring-5.18-2022-04-22' of git://git.kernel.dk/linux-block
Linus Torvalds [Sat, 23 Apr 2022 16:42:13 +0000 (09:42 -0700)]
Merge tag 'io_uring-5.18-2022-04-22' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:
 "Just two small fixes - one fixing a potential leak for the iovec for
  larger requests added in this cycle, and one fixing a theoretical leak
  with CQE_SKIP and IOPOLL"

* tag 'io_uring-5.18-2022-04-22' of git://git.kernel.dk/linux-block:
  io_uring: fix leaks on IOPOLL and CQE_SKIP
  io_uring: free iovec if file assignment fails

2 years agoMerge tag 'perf-tools-fixes-for-v5.18-2022-04-22' of git://git.kernel.org/pub/scm...
Linus Torvalds [Sat, 23 Apr 2022 16:36:23 +0000 (09:36 -0700)]
Merge tag 'perf-tools-fixes-for-v5.18-2022-04-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix header include for LLVM >= 14 when building with libclang.

 - Allow access to 'data_src' for auxtrace in 'perf script' with ARM SPE
   perf.data files, fixing processing data with such attributes.

 - Fix error message for test case 71 ("Convert perf time to TSC") on
   s390, where it is not supported.

* tag 'perf-tools-fixes-for-v5.18-2022-04-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf test: Fix error message for test case 71 on s390, where it is not supported
  perf report: Set PERF_SAMPLE_DATA_SRC bit for Arm SPE event
  perf script: Always allow field 'data_src' for auxtrace
  perf clang: Fix header include for LLVM >= 14

2 years agosparc: cacheflush_32.h needs struct page
Randy Dunlap [Sat, 23 Apr 2022 03:25:17 +0000 (20:25 -0700)]
sparc: cacheflush_32.h needs struct page

Add a struct page forward declaration to cacheflush_32.h.
Fixes this build warning:

    CC      drivers/crypto/xilinx/zynqmp-sha.o
  In file included from arch/sparc/include/asm/cacheflush.h:11,
                   from include/linux/cacheflush.h:5,
                   from drivers/crypto/xilinx/zynqmp-sha.c:6:
  arch/sparc/include/asm/cacheflush_32.h:38:37: warning: 'struct page' declared inside parameter list will not be visible outside of this definition or declaration
     38 | void sparc_flush_page_to_ram(struct page *page);

Exposed by commit 0e03b8fd2936 ("crypto: xilinx - Turn SHA into a
tristate and allow COMPILE_TEST") but not Fixes: that commit because the
underlying problem is older.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: sparclinux@vger.kernel.org
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2 years agoMerge tag 'drm-misc-fixes-2022-04-22' of git://anongit.freedesktop.org/drm/drm-misc...
Dave Airlie [Sat, 23 Apr 2022 05:00:33 +0000 (15:00 +1000)]
Merge tag 'drm-misc-fixes-2022-04-22' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

Two fixes for the raspberrypi panel initialisation, one fix for a logic
inversion in radeon, a build and pm refcounting fix for vc4, two reverts
for drm_of_get_bridge that caused a number of regression and a locking
regression for amdgpu.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220422084403.2xrhf3jusdej5yo4@houat
2 years agoMerge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 23 Apr 2022 01:18:27 +0000 (18:18 -0700)]
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
 "Fix some syzbot-detected bugs, as well as other bugs found by I/O
  injection testing.

  Change ext4's fallocate to consistently drop set[ug]id bits when an
  fallocate operation might possibly change the user-visible contents of
  a file.

  Also, improve handling of potentially invalid values in the the
  s_overhead_cluster superblock field to avoid ext4 returning a negative
  number of free blocks"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  jbd2: fix a potential race while discarding reserved buffers after an abort
  ext4: update the cached overhead value in the superblock
  ext4: force overhead calculation if the s_overhead_cluster makes no sense
  ext4: fix overhead calculation to account for the reserved gdt blocks
  ext4, doc: fix incorrect h_reserved size
  ext4: limit length to bitmap_maxbytes - blocksize in punch_hole
  ext4: fix use-after-free in ext4_search_dir
  ext4: fix bug_on in start_this_handle during umount filesystem
  ext4: fix symlink file size not match to file content
  ext4: fix fallocate to use file_modified to update permissions consistently

2 years agoMerge tag 'ata-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal...
Linus Torvalds [Sat, 23 Apr 2022 01:09:49 +0000 (18:09 -0700)]
Merge tag 'ata-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata

Pull ATA fix from Damien Le Moal:
 "A single fix to avoid a NULL pointer dereference in the pata_marvell
  driver with adapters not supporting DMA, from Zheyu"

* tag 'ata-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: pata_marvell: Check the 'bmdma_addr' beforing reading

2 years agoMerge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Linus Torvalds [Sat, 23 Apr 2022 00:58:36 +0000 (17:58 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
 "The main and larger change here is a workaround for AMD's lack of
  cache coherency for encrypted-memory guests.

  I have another patch pending, but it's waiting for review from the
  architecture maintainers.

  RISC-V:

   - Remove 's' & 'u' as valid ISA extension

   - Do not allow disabling the base extensions 'i'/'m'/'a'/'c'

  x86:

   - Fix NMI watchdog in guests on AMD

   - Fix for SEV cache incoherency issues

   - Don't re-acquire SRCU lock in complete_emulated_io()

   - Avoid NULL pointer deref if VM creation fails

   - Fix race conditions between APICv disabling and vCPU creation

   - Bugfixes for disabling of APICv

   - Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resume

  selftests:

   - Do not use bitfields larger than 32-bits, they differ between GCC
     and clang"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm: selftests: introduce and use more page size-related constants
  kvm: selftests: do not use bitfields larger than 32-bits for PTEs
  KVM: SEV: add cache flush to solve SEV cache incoherency issues
  KVM: SVM: Flush when freeing encrypted pages even on SME_COHERENT CPUs
  KVM: SVM: Simplify and harden helper to flush SEV guest page(s)
  KVM: selftests: Silence compiler warning in the kvm_page_table_test
  KVM: x86/pmu: Update AMD PMC sample period to fix guest NMI-watchdog
  x86/kvm: Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resume
  KVM: SPDX style and spelling fixes
  KVM: x86: Skip KVM_GUESTDBG_BLOCKIRQ APICv update if APICv is disabled
  KVM: x86: Pend KVM_REQ_APICV_UPDATE during vCPU creation to fix a race
  KVM: nVMX: Defer APICv updates while L2 is active until L1 is active
  KVM: x86: Tag APICv DISABLE inhibit, not ABSENT, if APICv is disabled
  KVM: Initialize debugfs_dentry when a VM is created to avoid NULL deref
  KVM: Add helpers to wrap vcpu->srcu_idx and yell if it's abused
  KVM: RISC-V: Use kvm_vcpu.srcu_idx, drop RISC-V's unnecessary copy
  KVM: x86: Don't re-acquire SRCU lock in complete_emulated_io()
  RISC-V: KVM: Restrict the extensions that can be disabled
  RISC-V: KVM: Remove 's' & 'u' as valid ISA extension

2 years agoperf test: Fix error message for test case 71 on s390, where it is not supported
Thomas Richter [Wed, 20 Apr 2022 06:29:21 +0000 (08:29 +0200)]
perf test: Fix error message for test case 71 on s390, where it is not supported

Test case 71 'Convert perf time to TSC' is not supported on s390.

Subtest 71.1 is skipped with the correct message, but subtest 71.2 is
not skipped and fails.

The root cause is function evlist__open() called from
test__perf_time_to_tsc().  evlist__open() returns -ENOENT because the
event cycles:u is not supported by the selected PMU, for example
platform s390 on z/VM or an x86_64 virtual machine.

The PMU driver returns -ENOENT in this case. This error is leads to the
failure.

Fix this by returning TEST_SKIP on -ENOENT.

Output before:
 71: Convert perf time to TSC:
 71.1: TSC support:             Skip (This architecture does not support)
 71.2: Perf time to TSC:        FAILED!

Output after:
 71: Convert perf time to TSC:
 71.1: TSC support:             Skip (This architecture does not support)
 71.2: Perf time to TSC:        Skip (perf_read_tsc_conversion is not supported)

This also happens on an x86_64 virtual machine:
   # uname -m
   x86_64
   $ ./perf test -F 71
    71: Convert perf time to TSC  :
    71.1: TSC support             : Ok
    71.2: Perf time to TSC        : FAILED!
   $

Committer testing:

Continues to work on x86_64:

  $ perf test 71
   71: Convert perf time to TSC    :
   71.1: TSC support               : Ok
   71.2: Perf time to TSC          : Ok
  $

Fixes: 290fa68bdc458863 ("perf test tsc: Fix error message when not supported")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Chengdong Li <chengdongli@tencent.com>
Cc: chengdongli@tencent.com
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20220420062921.1211825-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2 years agoperf report: Set PERF_SAMPLE_DATA_SRC bit for Arm SPE event
Leo Yan [Thu, 14 Apr 2022 12:32:01 +0000 (20:32 +0800)]
perf report: Set PERF_SAMPLE_DATA_SRC bit for Arm SPE event

Since commit bb30acae4c4dacfa ("perf report: Bail out --mem-mode if mem
info is not available") "perf mem report" and "perf report --mem-mode"
don't report result if the PERF_SAMPLE_DATA_SRC bit is missed in sample
type.

The commit ffab487052054162 ("perf: arm-spe: Fix perf report
--mem-mode") partially fixes the issue.  It adds PERF_SAMPLE_DATA_SRC
bit for Arm SPE event, this allows the perf data file generated by
kernel v5.18-rc1 or later version can be reported properly.

On the other hand, perf tool still fails to be backward compatibility
for a data file recorded by an older version's perf which contains Arm
SPE trace data.  This patch is a workaround in reporting phase, when
detects ARM SPE PMU event and without PERF_SAMPLE_DATA_SRC bit, it will
force to set the bit in the sample type and give a warning info.

Fixes: bb30acae4c4dacfa ("perf report: Bail out --mem-mode if mem info is not available")
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: German Gomez <german.gomez@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: https://lore.kernel.org/r/20220414123201.842754-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2 years agoperf script: Always allow field 'data_src' for auxtrace
Leo Yan [Sun, 17 Apr 2022 11:48:37 +0000 (19:48 +0800)]
perf script: Always allow field 'data_src' for auxtrace

If use command 'perf script -F,+data_src' to dump memory samples with
Arm SPE trace data, it reports error:

  # perf script -F,+data_src
  Samples for 'dummy:u' event do not have DATA_SRC attribute set. Cannot print 'data_src' field.

This is because the 'dummy:u' event is absent DATA_SRC bit in its sample
type, so if a file contains AUX area tracing data then always allow
field 'data_src' to be selected as an option for perf script.

Fixes: e55ed3423c1bb29f ("perf arm-spe: Synthesize memory event")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220417114837.839896-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2 years agoperf clang: Fix header include for LLVM >= 14
Guilherme Amadio [Sat, 16 Apr 2022 07:45:55 +0000 (09:45 +0200)]
perf clang: Fix header include for LLVM >= 14

The header TargetRegistry.h has moved in LLVM/clang 14.

Committer notes:

The problem as noticed when building in ubuntu:22.04:

    90    98.61 ubuntu:22.04                  : FAIL gcc version 11.2.0 (Ubuntu 11.2.0-19ubuntu1)
      util/c++/clang.cpp:23:10: fatal error: llvm/Support/TargetRegistry.h: No such file or directory
         23 | #include "llvm/Support/TargetRegistry.h"
            |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      compilation terminated.

Fixed after applying this patch.

Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Guilherme Amadio <amadio@gentoo.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://twitter.com/GuilhermeAmadio/status/1514970524232921088
Link: http://lore.kernel.org/lkml/Ylp0M/VYgHOxtcnF@gentoo.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2 years agogpio: Request interrupts after IRQ is initialized
Mario Limonciello [Fri, 22 Apr 2022 13:14:52 +0000 (08:14 -0500)]
gpio: Request interrupts after IRQ is initialized

Commit 5467801f1fcb ("gpio: Restrict usage of GPIO chip irq members
before initialization") attempted to fix a race condition that lead to a
NULL pointer, but in the process caused a regression for _AEI/_EVT
declared GPIOs.

This manifests in messages showing deferred probing while trying to
allocate IRQs like so:

  amd_gpio AMDI0030:00: Failed to translate GPIO pin 0x0000 to IRQ, err -517
  amd_gpio AMDI0030:00: Failed to translate GPIO pin 0x002C to IRQ, err -517
  amd_gpio AMDI0030:00: Failed to translate GPIO pin 0x003D to IRQ, err -517
  [ .. more of the same .. ]

The code for walking _AEI doesn't handle deferred probing and so this
leads to non-functional GPIO interrupts.

Fix this issue by moving the call to `acpi_gpiochip_request_interrupts`
to occur after gc->irc.initialized is set.

Fixes: 5467801f1fcb ("gpio: Restrict usage of GPIO chip irq members before initialization")
Link: https://lore.kernel.org/linux-gpio/BL1PR12MB51577A77F000A008AA694675E2EF9@BL1PR12MB5157.namprd12.prod.outlook.com/
Link: https://bugzilla.suse.com/show_bug.cgi?id=1198697
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215850
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1979
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1976
Reported-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Shreeya Patel <shreeya.patel@collabora.com>
Tested-By: Samuel Čavoj <samuel@cavoj.net>
Tested-By: lukeluk498@gmail.com Link:
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-and-tested-by: Takashi Iwai <tiwai@suse.de>
Cc: Shreeya Patel <shreeya.patel@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2 years agoMerge tag 'riscv-for-linus-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 22 Apr 2022 20:53:14 +0000 (13:53 -0700)]
Merge tag 'riscv-for-linus-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V fixes Palmer Dabbelt:

 - A pair of build fixes for the recent cpuidle driver

 - A fix for systems without sv57 that manifests as a crash
   early in boot

* tag 'riscv-for-linus-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: cpuidle: fix Kconfig select for RISCV_SBI_CPUIDLE
  RISC-V: mm: Fix set_satp_mode() for platform not having Sv57
  cpuidle: riscv: support non-SMP config

2 years agoMerge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Linus Torvalds [Fri, 22 Apr 2022 20:49:26 +0000 (13:49 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:
 "There's no real pattern to the fixes, but the main one fixes our
  pmd_leaf() definition to resolve a NULL dereference on the migration
  path.

   - Fix PMU event validation in the absence of any event counters

   - Fix allmodconfig build using clang in conjunction with binutils

   - Fix definitions of pXd_leaf() to handle PROT_NONE entries

   - More typo fixes"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: mm: fix p?d_leaf()
  arm64: fix typos in comments
  arm64: Improve HAVE_DYNAMIC_FTRACE_WITH_REGS selection for clang
  arm_pmu: Validate single/group leader events

2 years agoMerge tag 'xarray-5.18a' of git://git.infradead.org/users/willy/xarray
Linus Torvalds [Fri, 22 Apr 2022 20:31:39 +0000 (13:31 -0700)]
Merge tag 'xarray-5.18a' of git://git.infradead.org/users/willy/xarray

Pull xarray fixes from Matthew Wilcox:
 "Syzbot found a nasty race between large page splitting and page
  lookup. Details in the commit log, but fortunately it has a reliable
  reproducer. I thought it better to send this one to you straight away.

  Also fix the test suite build for kmem_cache_alloc_lru()"

* tag 'xarray-5.18a' of git://git.infradead.org/users/willy/xarray:
  XArray: Disallow sibling entries of nodes
  tools: Add kmem_cache_alloc_lru()

2 years agoMerge tag '5.18-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Linus Torvalds [Fri, 22 Apr 2022 20:26:11 +0000 (13:26 -0700)]
Merge tag '5.18-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
 "Four fixes, two of them for stable:

   - fcollapse fix

   - reconnect lock fix

   - DFS oops fix

   - minor cleanup patch"

* tag '5.18-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: destage any unwritten data to the server before calling copychunk_write
  cifs: use correct lock type in cifs_reconnect()
  cifs: fix NULL ptr dereference in refresh_mounts()
  cifs: Use kzalloc instead of kmalloc/memset

2 years agoMerge tag 'fs.fixes.v5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/braun...
Linus Torvalds [Fri, 22 Apr 2022 20:17:19 +0000 (13:17 -0700)]
Merge tag 'fs.fixes.v5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux

Pull mount_setattr fix from Christian Brauner:
 "The recent cleanup in e257039f0fc7 ("mount_setattr(): clean the
  control flow and calling conventions") switched the mount attribute
  codepaths from do-while to for loops as they are more idiomatic when
  walking mounts.

  However, we did originally choose do-while constructs because if we
  request a mount or mount tree to be made read-only we need to hold
  writers in the following way: The mount attribute code will grab
  lock_mount_hash() and then call mnt_hold_writers() which will
  _unconditionally_ set MNT_WRITE_HOLD on the mount.

  Any callers that need write access have to call mnt_want_write(). They
  will immediately see that MNT_WRITE_HOLD is set on the mount and the
  caller will then either spin (on non-preempt-rt) or wait on
  lock_mount_hash() (on preempt-rt).

  The fact that MNT_WRITE_HOLD is set unconditionally means that once
  mnt_hold_writers() returns we need to _always_ pair it with
  mnt_unhold_writers() in both the failure and success paths.

  The do-while constructs did take care of this. But Al's change to a
  for loop in the failure path stops on the first mount we failed to
  change mount attributes _without_ going into the loop to call
  mnt_unhold_writers().

  This in turn means that once we failed to make a mount read-only via
  mount_setattr() - i.e. there are already writers on that mount - we
  will block any writers indefinitely. Fix this by ensuring that the for
  loop always unsets MNT_WRITE_HOLD including the first mount we failed
  to change to read-only. Also sprinkle a few comments into the cleanup
  code to remind people about what is happening including myself. After
  all, I didn't catch it during review.

  This is only relevant on mainline and was reported by syzbot. Details
  about the syzbot reports are all in the commit message"

* tag 'fs.fixes.v5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  fs: unset MNT_WRITE_HOLD on failure

2 years agoMerge tag 'sound-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai...
Linus Torvalds [Fri, 22 Apr 2022 20:11:38 +0000 (13:11 -0700)]
Merge tag 'sound-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "At this time, the majority of changes are for pending ASoC fixes while
  a few usual HD-audio and USB-audio quirks are found.

  Almost all patches are small device-specific fixes, and nothing
  worrisome stands out, so far"

* tag 'sound-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (37 commits)
  ALSA: hda/realtek: Add quirk for Clevo NP70PNP
  ALSA: hda: intel-dsp-config: Add RaptorLake PCI IDs
  ALSA: hda/realtek: Enable mute/micmute LEDs and limit mic boost on EliteBook 845/865 G9
  ALSA: usb-audio: Clear MIDI port active flag after draining
  ALSA: usb-audio: add mapping for MSI MAG X570S Torpedo MAX.
  ALSA: hda/i915: Fix one too many pci_dev_put()
  ALSA: hda/hdmi: add HDMI codec VID for Raptorlake-P
  ALSA: hda/hdmi: fix warning about PCM count when used with SOF
  sound/oss/dmasound: fix 'dmasound_setup' defined but not used
  firmware: cs_dsp: Fix overrun of unterminated control name string
  ASoC: codecs: Fix an error handling path in (rx|tx|va)_macro_probe()
  ASoC: Intel: sof_es8336: Add a quirk for Huawei Matebook D15
  ASoC: Intel: sof_es8336: add a quirk for headset at mic1 port
  ASoC: Intel: sof_es8336: support a separate gpio to control headphone
  ASoC: Intel: sof_es8336: simplify speaker gpio naming
  ASoC: wm8731: Disable the regulator when probing fails
  ASoC: Intel: soc-acpi: correct device endpoints for max98373
  ASoC: codecs: wcd934x: do not switch off SIDO Buck when codec is in use
  ASoC: SOF: topology: Fix memory leak in sof_control_load()
  ASoC: SOF: topology: cleanup dailinks on widget unload
  ...

2 years agoXArray: Disallow sibling entries of nodes
Matthew Wilcox (Oracle) [Fri, 22 Apr 2022 17:23:12 +0000 (13:23 -0400)]
XArray: Disallow sibling entries of nodes

There is a race between xas_split() and xas_load() which can result in
the wrong page being returned, and thus data corruption.  Fortunately,
it's hard to hit (syzbot took three months to find it) and often guarded
with VM_BUG_ON().

The anatomy of this race is:

thread A thread B
order-9 page is stored at index 0x200
lookup of page at index 0x274
page split starts
load of sibling entry at offset 9
stores nodes at offsets 8-15
load of entry at offset 8

The entry at offset 8 turns out to be a node, and so we descend into it,
and load the page at index 0x234 instead of 0x274.  This is hard to fix
on the split side; we could replace the entire node that contains the
order-9 page instead of replacing the eight entries.  Fixing it on
the lookup side is easier; just disallow sibling entries that point
to nodes.  This cannot ever be a useful thing as the descent would not
know the correct offset to use within the new node.

The test suite continues to pass, but I have not added a new test for
this bug.

Reported-by: syzbot+cf4cf13056f85dec2c40@syzkaller.appspotmail.com
Tested-by: syzbot+cf4cf13056f85dec2c40@syzkaller.appspotmail.com
Fixes: 6b24ca4a1a8d ("mm: Use multi-index entries in the page cache")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2 years agotools: Add kmem_cache_alloc_lru()
Matthew Wilcox (Oracle) [Fri, 22 Apr 2022 17:20:21 +0000 (13:20 -0400)]
tools: Add kmem_cache_alloc_lru()

Turn kmem_cache_alloc() into a wrapper around kmem_cache_alloc_lru().

Fixes: 9bbdc0f32409 ("xarray: use kmem_cache_alloc_lru to allocate xa_node")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Li Wang <liwang@redhat.com>
2 years agoMerge branch 'akpm' (patches from Andrew)
Linus Torvalds [Fri, 22 Apr 2022 17:10:43 +0000 (10:10 -0700)]
Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
 "13 patches.

  Subsystems affected by this patch series: mm (memory-failure, memcg,
  userfaultfd, hugetlbfs, mremap, oom-kill, kasan, hmm), and kcov"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/mmu_notifier.c: fix race in mmu_interval_notifier_remove()
  kcov: don't generate a warning on vm_insert_page()'s failure
  MAINTAINERS: add Vincenzo Frascino to KASAN reviewers
  oom_kill.c: futex: delay the OOM reaper to allow time for proper futex cleanup
  selftest/vm: add skip support to mremap_test
  selftest/vm: support xfail in mremap_test
  selftest/vm: verify remap destination address in mremap_test
  selftest/vm: verify mmap addr in mremap_test
  mm, hugetlb: allow for "high" userspace addresses
  userfaultfd: mark uffd_wp regardless of VM_WRITE flag
  memcg: sync flush only if periodic flush is delayed
  mm/memory-failure.c: skip huge_zero_page in memory_failure()
  mm/hwpoison: fix race between hugetlb free/demotion and memory_failure_hugetlb()

2 years agomm/vmalloc: huge vmalloc backing pages should be split rather than compound
Nicholas Piggin [Fri, 22 Apr 2022 06:01:05 +0000 (16:01 +1000)]
mm/vmalloc: huge vmalloc backing pages should be split rather than compound

Huge vmalloc higher-order backing pages were allocated with __GFP_COMP
in order to allow the sub-pages to be refcounted by callers such as
"remap_vmalloc_page [sic]" (remap_vmalloc_range).

However a similar problem exists for other struct page fields callers
use, for example fb_deferred_io_fault() takes a vmalloc'ed page and
not only refcounts it but uses ->lru, ->mapping, ->index.

This is not compatible with compound sub-pages, and can cause bad page
state issues like

  BUG: Bad page state in process swapper/0  pfn:00743
  page:(____ptrval____) refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x743
  flags: 0x7ffff000000000(node=0|zone=0|lastcpupid=0x7ffff)
  raw: 007ffff000000000 c00c00000001d0c8 c00c00000001d0c8 0000000000000000
  raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
  page dumped because: corrupted mapping in tail page
  Modules linked in:
  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.18.0-rc3-00082-gfc6fff4a7ce1-dirty #2810
  Call Trace:
    dump_stack_lvl+0x74/0xa8 (unreliable)
    bad_page+0x12c/0x170
    free_tail_pages_check+0xe8/0x190
    free_pcp_prepare+0x31c/0x4e0
    free_unref_page+0x40/0x1b0
    __vunmap+0x1d8/0x420
    ...

The correct approach is to use split high-order pages for the huge
vmalloc backing. These allow callers to treat them in exactly the same
way as individually-allocated order-0 pages.

Link: https://lore.kernel.org/all/14444103-d51b-0fb3-ee63-c3f182f0b546@molgen.mpg.de/
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Cc: Paul Menzel <pmenzel@molgen.mpg.de>
Cc: Song Liu <songliubraving@fb.com>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2 years agoarm64: mm: fix p?d_leaf()
Muchun Song [Fri, 22 Apr 2022 06:00:33 +0000 (14:00 +0800)]
arm64: mm: fix p?d_leaf()

The pmd_leaf() is used to test a leaf mapped PMD, however, it misses
the PROT_NONE mapped PMD on arm64.  Fix it.  A real world issue [1]
caused by this was reported by Qian Cai. Also fix pud_leaf().

Link: https://patchwork.kernel.org/comment/24798260/
Fixes: 8aa82df3c123 ("arm64: mm: add p?d_leaf() definitions")
Reported-by: Qian Cai <quic_qiancai@quicinc.com>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Link: https://lore.kernel.org/r/20220422060033.48711-1-songmuchun@bytedance.com
Signed-off-by: Will Deacon <will@kernel.org>
2 years agoMerge tag 'drm-fixes-2022-04-22' of git://anongit.freedesktop.org/drm/drm
Linus Torvalds [Fri, 22 Apr 2022 03:10:43 +0000 (20:10 -0700)]
Merge tag 'drm-fixes-2022-04-22' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "Extra quiet after Easter, only have minor i915 and msm pulls. However
  I haven't seen a PR from our misc tree in a little while, I've cc'ed
  all the suspects. Once that unblocks I expect a bit larger bunch of
  patches to arrive.

  Otherwise as I said, one msm revert and two i915 fixes.

  msm:

   - revert iommu change that broke some platforms.

  i915:

   - Unset enable_psr2_sel_fetch if PSR2 detection fails

   - Fix to detect when VRR is turned off from panel settings"

* tag 'drm-fixes-2022-04-22' of git://anongit.freedesktop.org/drm/drm:
  drm/i915/display/psr: Unset enable_psr2_sel_fetch if other checks in intel_psr2_config_valid() fails
  drm/msm: Revert "drm/msm: Stop using iommu_present()"
  drm/i915/display/vrr: Reset VRR capable property on a long hpd

2 years agomm/mmu_notifier.c: fix race in mmu_interval_notifier_remove()
Alistair Popple [Thu, 21 Apr 2022 23:36:10 +0000 (16:36 -0700)]
mm/mmu_notifier.c: fix race in mmu_interval_notifier_remove()

In some cases it is possible for mmu_interval_notifier_remove() to race
with mn_tree_inv_end() allowing it to return while the notifier data
structure is still in use.  Consider the following sequence:

  CPU0 - mn_tree_inv_end()            CPU1 - mmu_interval_notifier_remove()
  ----------------------------------- ------------------------------------
                                      spin_lock(subscriptions->lock);
                                      seq = subscriptions->invalidate_seq;
  spin_lock(subscriptions->lock);     spin_unlock(subscriptions->lock);
  subscriptions->invalidate_seq++;
                                      wait_event(invalidate_seq != seq);
                                      return;
  interval_tree_remove(interval_sub); kfree(interval_sub);
  spin_unlock(subscriptions->lock);
  wake_up_all();

As the wait_event() condition is true it will return immediately.  This
can lead to use-after-free type errors if the caller frees the data
structure containing the interval notifier subscription while it is
still on a deferred list.  Fix this by taking the appropriate lock when
reading invalidate_seq to ensure proper synchronisation.

I observed this whilst running stress testing during some development.
You do have to be pretty unlucky, but it leads to the usual problems of
use-after-free (memory corruption, kernel crash, difficult to diagnose
WARN_ON, etc).

Link: https://lkml.kernel.org/r/20220420043734.476348-1-apopple@nvidia.com
Fixes: 99cb252f5e68 ("mm/mmu_notifier: add an interval tree notifier")
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2 years agokcov: don't generate a warning on vm_insert_page()'s failure
Aleksandr Nogikh [Thu, 21 Apr 2022 23:36:07 +0000 (16:36 -0700)]
kcov: don't generate a warning on vm_insert_page()'s failure

vm_insert_page()'s failure is not an unexpected condition, so don't do
WARN_ONCE() in such a case.

Instead, print a kernel message and just return an error code.

This flaw has been reported under an OOM condition by sysbot [1].

The message is mainly for the benefit of the test log, in this case the
fuzzer's log so that humans inspecting the log can figure out what was
going on.  KCOV is a testing tool, so I think being a little more chatty
when KCOV unexpectedly is about to fail will save someone debugging
time.

We don't want the WARN, because it's not a kernel bug that syzbot should
report, and failure can happen if the fuzzer tries hard enough (as
above).

Link: https://lkml.kernel.org/r/Ylkr2xrVbhQYwNLf@elver.google.com
Link: https://lkml.kernel.org/r/20220401182512.249282-1-nogikh@google.com
Fixes: b3d7fe86fbd0 ("kcov: properly handle subsequent mmap calls"),
Signed-off-by: Aleksandr Nogikh <nogikh@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Taras Madan <tarasmadan@google.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2 years agoMAINTAINERS: add Vincenzo Frascino to KASAN reviewers
Vincenzo Frascino [Thu, 21 Apr 2022 23:36:04 +0000 (16:36 -0700)]
MAINTAINERS: add Vincenzo Frascino to KASAN reviewers

Add my email address to KASAN reviewers list to make sure that I am
Cc'ed in all the KASAN changes that may affect arm64 MTE.

Link: https://lkml.kernel.org/r/20220419170640.21404-1-vincenzo.frascino@arm.com
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2 years agooom_kill.c: futex: delay the OOM reaper to allow time for proper futex cleanup
Nico Pache [Thu, 21 Apr 2022 23:36:01 +0000 (16:36 -0700)]
oom_kill.c: futex: delay the OOM reaper to allow time for proper futex cleanup

The pthread struct is allocated on PRIVATE|ANONYMOUS memory [1] which
can be targeted by the oom reaper.  This mapping is used to store the
futex robust list head; the kernel does not keep a copy of the robust
list and instead references a userspace address to maintain the
robustness during a process death.

A race can occur between exit_mm and the oom reaper that allows the oom
reaper to free the memory of the futex robust list before the exit path
has handled the futex death:

    CPU1                               CPU2
    --------------------------------------------------------------------
    page_fault
    do_exit "signal"
    wake_oom_reaper
                                        oom_reaper
                                        oom_reap_task_mm (invalidates mm)
    exit_mm
    exit_mm_release
    futex_exit_release
    futex_cleanup
    exit_robust_list
    get_user (EFAULT- can't access memory)

If the get_user EFAULT's, the kernel will be unable to recover the
waiters on the robust_list, leaving userspace mutexes hung indefinitely.

Delay the OOM reaper, allowing more time for the exit path to perform
the futex cleanup.

Reproducer: https://gitlab.com/jsavitz/oom_futex_reproducer

Based on a patch by Michal Hocko.

Link: https://elixir.bootlin.com/glibc/glibc-2.35/source/nptl/allocatestack.c#L370
Link: https://lkml.kernel.org/r/20220414144042.677008-1-npache@redhat.com
Fixes: 212925802454 ("mm: oom: let oom_reap_task and exit_mmap run concurrently")
Signed-off-by: Joel Savitz <jsavitz@redhat.com>
Signed-off-by: Nico Pache <npache@redhat.com>
Co-developed-by: Joel Savitz <jsavitz@redhat.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Herton R. Krzesinski <herton@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joel Savitz <jsavitz@redhat.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2 years agoselftest/vm: add skip support to mremap_test
Sidhartha Kumar [Thu, 21 Apr 2022 23:35:58 +0000 (16:35 -0700)]
selftest/vm: add skip support to mremap_test

Allow the mremap test to be skipped due to errors such as failing to
parse the mmap_min_addr sysctl.

Link: https://lkml.kernel.org/r/20220420215721.4868-4-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2 years agoselftest/vm: support xfail in mremap_test
Sidhartha Kumar [Thu, 21 Apr 2022 23:35:55 +0000 (16:35 -0700)]
selftest/vm: support xfail in mremap_test

Use ksft_test_result_xfail for the tests which are expected to fail.

Link: https://lkml.kernel.org/r/20220420215721.4868-3-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2 years agoselftest/vm: verify remap destination address in mremap_test
Sidhartha Kumar [Thu, 21 Apr 2022 23:35:52 +0000 (16:35 -0700)]
selftest/vm: verify remap destination address in mremap_test

Because mremap does not have a MAP_FIXED_NOREPLACE flag, it can destroy
existing mappings.  This causes a segfault when regions such as text are
remapped and the permissions are changed.

Verify the requested mremap destination address does not overlap any
existing mappings by using mmap's MAP_FIXED_NOREPLACE flag.  Keep
incrementing the destination address until a valid mapping is found or
fail the current test once the max address is reached.

Link: https://lkml.kernel.org/r/20220420215721.4868-2-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2 years agoselftest/vm: verify mmap addr in mremap_test
Sidhartha Kumar [Thu, 21 Apr 2022 23:35:49 +0000 (16:35 -0700)]
selftest/vm: verify mmap addr in mremap_test

Avoid calling mmap with requested addresses that are less than the
system's mmap_min_addr.  When run as root, mmap returns EACCES when
trying to map addresses < mmap_min_addr.  This is not one of the error
codes for the condition to retry the mmap in the test.

Rather than arbitrarily retrying on EACCES, don't attempt an mmap until
addr > vm.mmap_min_addr.

Add a munmap call after an alignment check as the mappings are retained
after the retry and can reach the vm.max_map_count sysctl.

Link: https://lkml.kernel.org/r/20220420215721.4868-1-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2 years agomm, hugetlb: allow for "high" userspace addresses
Christophe Leroy [Thu, 21 Apr 2022 23:35:46 +0000 (16:35 -0700)]
mm, hugetlb: allow for "high" userspace addresses

This is a fix for commit f6795053dac8 ("mm: mmap: Allow for "high"
userspace addresses") for hugetlb.

This patch adds support for "high" userspace addresses that are
optionally supported on the system and have to be requested via a hint
mechanism ("high" addr parameter to mmap).

Architectures such as powerpc and x86 achieve this by making changes to
their architectural versions of hugetlb_get_unmapped_area() function.
However, arm64 uses the generic version of that function.

So take into account arch_get_mmap_base() and arch_get_mmap_end() in
hugetlb_get_unmapped_area().  To allow that, move those two macros out
of mm/mmap.c into include/linux/sched/mm.h

If these macros are not defined in architectural code then they default
to (TASK_SIZE) and (base) so should not introduce any behavioural
changes to architectures that do not define them.

For the time being, only ARM64 is affected by this change.

Catalin (ARM64) said
 "We should have fixed hugetlb_get_unmapped_area() as well when we added
  support for 52-bit VA. The reason for commit f6795053dac8 was to
  prevent normal mmap() from returning addresses above 48-bit by default
  as some user-space had hard assumptions about this.

  It's a slight ABI change if you do this for hugetlb_get_unmapped_area()
  but I doubt anyone would notice. It's more likely that the current
  behaviour would cause issues, so I'd rather have them consistent.

  Basically when arm64 gained support for 52-bit addresses we did not
  want user-space calling mmap() to suddenly get such high addresses,
  otherwise we could have inadvertently broken some programs (similar
  behaviour to x86 here). Hence we added commit f6795053dac8. But we
  missed hugetlbfs which could still get such high mmap() addresses. So
  in theory that's a potential regression that should have bee addressed
  at the same time as commit f6795053dac8 (and before arm64 enabled
  52-bit addresses)"

Link: https://lkml.kernel.org/r/ab847b6edb197bffdfe189e70fb4ac76bfe79e0d.1650033747.git.christophe.leroy@csgroup.eu
Fixes: f6795053dac8 ("mm: mmap: Allow for "high" userspace addresses")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: <stable@vger.kernel.org> [5.0.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2 years agouserfaultfd: mark uffd_wp regardless of VM_WRITE flag
Nadav Amit [Thu, 21 Apr 2022 23:35:43 +0000 (16:35 -0700)]
userfaultfd: mark uffd_wp regardless of VM_WRITE flag

When a PTE is set by UFFD operations such as UFFDIO_COPY, the PTE is
currently only marked as write-protected if the VMA has VM_WRITE flag
set.  This seems incorrect or at least would be unexpected by the users.

Consider the following sequence of operations that are being performed
on a certain page:

mprotect(PROT_READ)
UFFDIO_COPY(UFFDIO_COPY_MODE_WP)
mprotect(PROT_READ|PROT_WRITE)

At this point the user would expect to still get UFFD notification when
the page is accessed for write, but the user would not get one, since
the PTE was not marked as UFFD_WP during UFFDIO_COPY.

Fix it by always marking PTEs as UFFD_WP regardless on the
write-permission in the VMA flags.

Link: https://lkml.kernel.org/r/20220217211602.2769-1-namit@vmware.com
Fixes: 292924b26024 ("userfaultfd: wp: apply _PAGE_UFFD_WP bit")
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2 years agomemcg: sync flush only if periodic flush is delayed
Shakeel Butt [Thu, 21 Apr 2022 23:35:40 +0000 (16:35 -0700)]
memcg: sync flush only if periodic flush is delayed

Daniel Dao has reported [1] a regression on workloads that may trigger a
lot of refaults (anon and file).  The underlying issue is that flushing
rstat is expensive.  Although rstat flush are batched with (nr_cpus *
MEMCG_BATCH) stat updates, it seems like there are workloads which
genuinely do stat updates larger than batch value within short amount of
time.  Since the rstat flush can happen in the performance critical
codepaths like page faults, such workload can suffer greatly.

This patch fixes this regression by making the rstat flushing
conditional in the performance critical codepaths.  More specifically,
the kernel relies on the async periodic rstat flusher to flush the stats
and only if the periodic flusher is delayed by more than twice the
amount of its normal time window then the kernel allows rstat flushing
from the performance critical codepaths.

Now the question: what are the side-effects of this change? The worst
that can happen is the refault codepath will see 4sec old lruvec stats
and may cause false (or missed) activations of the refaulted page which
may under-or-overestimate the workingset size.  Though that is not very
concerning as the kernel can already miss or do false activations.

There are two more codepaths whose flushing behavior is not changed by
this patch and we may need to come to them in future.  One is the
writeback stats used by dirty throttling and second is the deactivation
heuristic in the reclaim.  For now keeping an eye on them and if there
is report of regression due to these codepaths, we will reevaluate then.

Link: https://lore.kernel.org/all/CA+wXwBSyO87ZX5PVwdHm-=dBjZYECGmfnydUicUyrQqndgX2MQ@mail.gmail.com
Link: https://lkml.kernel.org/r/20220304184040.1304781-1-shakeelb@google.com
Fixes: 1f828223b799 ("memcg: flush lruvec stats in the refault")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reported-by: Daniel Dao <dqminh@cloudflare.com>
Tested-by: Ivan Babrou <ivan@cloudflare.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Frank Hofmann <fhofmann@cloudflare.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2 years agomm/memory-failure.c: skip huge_zero_page in memory_failure()
Xu Yu [Thu, 21 Apr 2022 23:35:37 +0000 (16:35 -0700)]
mm/memory-failure.c: skip huge_zero_page in memory_failure()

Kernel panic when injecting memory_failure for the global
huge_zero_page, when CONFIG_DEBUG_VM is enabled, as follows.

  Injecting memory failure for pfn 0x109ff9 at process virtual address 0x20ff9000
  page:00000000fb053fc3 refcount:2 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x109e00
  head:00000000fb053fc3 order:9 compound_mapcount:0 compound_pincount:0
  flags: 0x17fffc000010001(locked|head|node=0|zone=2|lastcpupid=0x1ffff)
  raw: 017fffc000010001 0000000000000000 dead000000000122 0000000000000000
  raw: 0000000000000000 0000000000000000 00000002ffffffff 0000000000000000
  page dumped because: VM_BUG_ON_PAGE(is_huge_zero_page(head))
  ------------[ cut here ]------------
  kernel BUG at mm/huge_memory.c:2499!
  invalid opcode: 0000 [#1] PREEMPT SMP PTI
  CPU: 6 PID: 553 Comm: split_bug Not tainted 5.18.0-rc1+ #11
  Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 3288b3c 04/01/2014
  RIP: 0010:split_huge_page_to_list+0x66a/0x880
  Code: 84 9b fb ff ff 48 8b 7c 24 08 31 f6 e8 9f 5d 2a 00 b8 b8 02 00 00 e9 e8 fb ff ff 48 c7 c6 e8 47 3c 82 4c b
  RSP: 0018:ffffc90000dcbdf8 EFLAGS: 00010246
  RAX: 000000000000003c RBX: 0000000000000001 RCX: 0000000000000000
  RDX: 0000000000000000 RSI: ffffffff823e4c4f RDI: 00000000ffffffff
  RBP: ffff88843fffdb40 R08: 0000000000000000 R09: 00000000fffeffff
  R10: ffffc90000dcbc48 R11: ffffffff82d68448 R12: ffffea0004278000
  R13: ffffffff823c6203 R14: 0000000000109ff9 R15: ffffea000427fe40
  FS:  00007fc375a26740(0000) GS:ffff88842fd80000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007fc3757c9290 CR3: 0000000102174006 CR4: 00000000003706e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   try_to_split_thp_page+0x3a/0x130
   memory_failure+0x128/0x800
   madvise_inject_error.cold+0x8b/0xa1
   __x64_sys_madvise+0x54/0x60
   do_syscall_64+0x35/0x80
   entry_SYSCALL_64_after_hwframe+0x44/0xae
  RIP: 0033:0x7fc3754f8bf9
  Code: 01 00 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 8
  RSP: 002b:00007ffeda93a1d8 EFLAGS: 00000217 ORIG_RAX: 000000000000001c
  RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc3754f8bf9
  RDX: 0000000000000064 RSI: 0000000000003000 RDI: 0000000020ff9000
  RBP: 00007ffeda93a200 R08: 0000000000000000 R09: 0000000000000000
  R10: 00000000ffffffff R11: 0000000000000217 R12: 0000000000400490
  R13: 00007ffeda93a2e0 R14: 0000000000000000 R15: 0000000000000000

This makes huge_zero_page bail out explicitly before split in
memory_failure(), thus the panic above won't happen again.

Link: https://lkml.kernel.org/r/497d3835612610e370c74e697ea3c721d1d55b9c.1649775850.git.xuyu@linux.alibaba.com
Fixes: 6a46079cf57a ("HWPOISON: The high level memory error handler in the VM v7")
Signed-off-by: Xu Yu <xuyu@linux.alibaba.com>
Reported-by: Abaci <abaci@linux.alibaba.com>
Suggested-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2 years agomm/hwpoison: fix race between hugetlb free/demotion and memory_failure_hugetlb()
Naoya Horiguchi [Thu, 21 Apr 2022 23:35:33 +0000 (16:35 -0700)]
mm/hwpoison: fix race between hugetlb free/demotion and memory_failure_hugetlb()

There is a race condition between memory_failure_hugetlb() and hugetlb
free/demotion, which causes setting PageHWPoison flag on the wrong page.
The one simple result is that wrong processes can be killed, but another
(more serious) one is that the actual error is left unhandled, so no one
prevents later access to it, and that might lead to more serious results
like consuming corrupted data.

Think about the below race window:

  CPU 1                                   CPU 2
  memory_failure_hugetlb
  struct page *head = compound_head(p);
                                          hugetlb page might be freed to
                                          buddy, or even changed to another
                                          compound page.

  get_hwpoison_page -- page is not what we want now...

The current code first does prechecks roughly and then reconfirms after
taking refcount, but it's found that it makes code overly complicated,
so move the prechecks in a single hugetlb_lock range.

A newly introduced function, try_memory_failure_hugetlb(), always takes
hugetlb_lock (even for non-hugetlb pages).  That can be improved, but
memory_failure() is rare in principle, so should not be a big problem.

Link: https://lkml.kernel.org/r/20220408135323.1559401-2-naoya.horiguchi@linux.dev
Fixes: 761ad8d7c7b5 ("mm: hwpoison: introduce memory_failure_hugetlb()")
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reported-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2 years agoata: pata_marvell: Check the 'bmdma_addr' beforing reading
Zheyu Ma [Thu, 21 Apr 2022 01:39:20 +0000 (09:39 +0800)]
ata: pata_marvell: Check the 'bmdma_addr' beforing reading

Before detecting the cable type on the dma bar, the driver should check
whether the 'bmdma_addr' is zero, which means the adapter does not
support DMA, otherwise we will get the following error:

[    5.146634] Bad IO access at port 0x1 (return inb(port))
[    5.147206] WARNING: CPU: 2 PID: 303 at lib/iomap.c:44 ioread8+0x4a/0x60
[    5.150856] RIP: 0010:ioread8+0x4a/0x60
[    5.160238] Call Trace:
[    5.160470]  <TASK>
[    5.160674]  marvell_cable_detect+0x6e/0xc0 [pata_marvell]
[    5.161728]  ata_eh_recover+0x3520/0x6cc0
[    5.168075]  ata_do_eh+0x49/0x3c0

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2 years agoMerge tag 'drm-msm-fixes-2022-04-20' of https://gitlab.freedesktop.org/drm/msm into...
Dave Airlie [Thu, 21 Apr 2022 23:24:31 +0000 (09:24 +1000)]
Merge tag 'drm-msm-fixes-2022-04-20' of https://gitlab.freedesktop.org/drm/msm into drm-fixes

Revert to fix iommu regression.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtvPo4xD2peAztDMPP2n4utb7d9WQboMFwsba9E8U2rCw@mail.gmail.com
2 years agoMerge tag 'dmaengine-fix-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul...
Linus Torvalds [Thu, 21 Apr 2022 23:24:31 +0000 (16:24 -0700)]
Merge tag 'dmaengine-fix-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine

Pull dmaengine fixes from Vinod Koul:
 "A bunch of driver fixes:

   - idxd device RO checks and device cleanup

   - dw-edma unaligned access and alignment

   - qcom: missing minItems in binding

   - mediatek pm usage fix

   - imx init script"

* tag 'dmaengine-fix-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
  dt-bindings: dmaengine: qcom: gpi: Add minItems for interrupts
  dmaengine: idxd: skip clearing device context when device is read-only
  dmaengine: idxd: add RO check for wq max_transfer_size write
  dmaengine: idxd: add RO check for wq max_batch_size write
  dmaengine: idxd: fix retry value to be constant for duration of function call
  dmaengine: idxd: match type for retries var in idxd_enqcmds()
  dmaengine: dw-edma: Fix inconsistent indenting
  dmaengine: dw-edma: Fix unaligned 64bit access
  dmaengine: mediatek:Fix PM usage reference leak of mtk_uart_apdma_alloc_chan_resources
  dmaengine: imx-sdma: Fix error checking in sdma_event_remap
  dma: at_xdmac: fix a missing check on list iterator
  dmaengine: imx-sdma: fix init of uart scripts
  dmaengine: idxd: fix device cleanup on disable

2 years agoRISC-V: cpuidle: fix Kconfig select for RISCV_SBI_CPUIDLE
Randy Dunlap [Sat, 9 Apr 2022 22:53:17 +0000 (15:53 -0700)]
RISC-V: cpuidle: fix Kconfig select for RISCV_SBI_CPUIDLE

There can be lots of build errors when building cpuidle-riscv-sbi.o.
They are all caused by a kconfig problem with this warning:

WARNING: unmet direct dependencies detected for RISCV_SBI_CPUIDLE
  Depends on [n]: CPU_IDLE [=y] && RISCV [=y] && RISCV_SBI [=n]
  Selected by [y]:
  - SOC_VIRT [=y] && CPU_IDLE [=y]

so make the 'select' of RISCV_SBI_CPUIDLE also depend on RISCV_SBI.

Fixes: c5179ef1ca0c ("RISC-V: Enable RISC-V SBI CPU Idle driver for QEMU virt machine")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2 years agoRISC-V: mm: Fix set_satp_mode() for platform not having Sv57
Anup Patel [Tue, 12 Apr 2022 03:33:35 +0000 (09:03 +0530)]
RISC-V: mm: Fix set_satp_mode() for platform not having Sv57

When Sv57 is not available the satp.MODE test in set_satp_mode() will
fail and lead to pgdir re-programming for Sv48. The pgdir re-programming
will fail as well due to pre-existing pgdir entry used for Sv57 and as
a result kernel fails to boot on RISC-V platform not having Sv57.

To fix above issue, we should clear the pgdir memory in set_satp_mode()
before re-programming.

Fixes: 011f09d12052 ("riscv: mm: Set sv57 on defaultly")
Reported-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2 years agoMerge tag 'drm-intel-fixes-2022-04-20' of git://anongit.freedesktop.org/drm/drm-intel...
Dave Airlie [Thu, 21 Apr 2022 20:34:36 +0000 (06:34 +1000)]
Merge tag 'drm-intel-fixes-2022-04-20' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Unset enable_psr2_sel_fetch if PSR2 detection fails
- Fix to detect when VRR is turned off from panel settings

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YmAKuHwon7hGyIoC@jlahtine-mobl.ger.corp.intel.com
2 years agokvm: selftests: introduce and use more page size-related constants
Paolo Bonzini [Wed, 20 Apr 2022 10:27:27 +0000 (06:27 -0400)]
kvm: selftests: introduce and use more page size-related constants

Clean up code that was hardcoding masks for various fields,
now that the masks are included in processor.h.

For more cleanup, define PAGE_SIZE and PAGE_MASK just like in Linux.
PAGE_SIZE in particular was defined by several tests.

Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2 years agokvm: selftests: do not use bitfields larger than 32-bits for PTEs
Paolo Bonzini [Wed, 20 Apr 2022 10:27:27 +0000 (06:27 -0400)]
kvm: selftests: do not use bitfields larger than 32-bits for PTEs

Red Hat's QE team reported test failure on access_tracking_perf_test:

Testing guest mode: PA-bits:ANY, VA-bits:48,  4K pages
guest physical test memory offset: 0x3fffbffff000

Populating memory             : 0.684014577s
Writing to populated memory   : 0.006230175s
Reading from populated memory : 0.004557805s
==== Test Assertion Failure ====
  lib/kvm_util.c:1411: false
  pid=125806 tid=125809 errno=4 - Interrupted system call
     1  0x0000000000402f7c: addr_gpa2hva at kvm_util.c:1411
     2   (inlined by) addr_gpa2hva at kvm_util.c:1405
     3  0x0000000000401f52: lookup_pfn at access_tracking_perf_test.c:98
     4   (inlined by) mark_vcpu_memory_idle at access_tracking_perf_test.c:152
     5   (inlined by) vcpu_thread_main at access_tracking_perf_test.c:232
     6  0x00007fefe9ff81ce: ?? ??:0
     7  0x00007fefe9c64d82: ?? ??:0
  No vm physical memory at 0xffbffff000

I can easily reproduce it with a Intel(R) Xeon(R) CPU E5-2630 with 46 bits
PA.

It turns out that the address translation for clearing idle page tracking
returned a wrong result; addr_gva2gpa()'s last step, which is based on
"pte[index[0]].pfn", did the calculation with 40 bits length and the
high 12 bits got truncated.  In above case the GPA address to be returned
should be 0x3fffbffff000 for GVA 0xc0000000, but it got truncated into
0xffbffff000 and the subsequent gpa2hva lookup failed.

The width of operations on bit fields greater than 32-bit is
implementation defined, and differs between GCC (which uses the bitfield
precision) and clang (which uses 64-bit arithmetic), so this is a
potential minefield.  Remove the bit fields and using manual masking
instead.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2075036
Reported-by: Nana Liu <nanliu@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2 years agoKVM: SEV: add cache flush to solve SEV cache incoherency issues
Mingwei Zhang [Thu, 21 Apr 2022 03:14:07 +0000 (03:14 +0000)]
KVM: SEV: add cache flush to solve SEV cache incoherency issues

Flush the CPU caches when memory is reclaimed from an SEV guest (where
reclaim also includes it being unmapped from KVM's memslots).  Due to lack
of coherency for SEV encrypted memory, failure to flush results in silent
data corruption if userspace is malicious/broken and doesn't ensure SEV
guest memory is properly pinned and unpinned.

Cache coherency is not enforced across the VM boundary in SEV (AMD APM
vol.2 Section 15.34.7). Confidential cachelines, generated by confidential
VM guests have to be explicitly flushed on the host side. If a memory page
containing dirty confidential cachelines was released by VM and reallocated
to another user, the cachelines may corrupt the new user at a later time.

KVM takes a shortcut by assuming all confidential memory remain pinned
until the end of VM lifetime. Therefore, KVM does not flush cache at
mmu_notifier invalidation events. Because of this incorrect assumption and
the lack of cache flushing, malicous userspace can crash the host kernel:
creating a malicious VM and continuously allocates/releases unpinned
confidential memory pages when the VM is running.

Add cache flush operations to mmu_notifier operations to ensure that any
physical memory leaving the guest VM get flushed. In particular, hook
mmu_notifier_invalidate_range_start and mmu_notifier_release events and
flush cache accordingly. The hook after releasing the mmu lock to avoid
contention with other vCPUs.

Cc: stable@vger.kernel.org
Suggested-by: Sean Christpherson <seanjc@google.com>
Reported-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Message-Id: <20220421031407.2516575-4-mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2 years agoMerge tag 'net-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Linus Torvalds [Thu, 21 Apr 2022 19:29:08 +0000 (12:29 -0700)]
Merge tag 'net-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
 "Including fixes from xfrm and can.

  Current release - regressions:

   - rxrpc: restore removed timer deletion

  Current release - new code bugs:

   - gre: fix device lookup for l3mdev use-case

   - xfrm: fix egress device lookup for l3mdev use-case

  Previous releases - regressions:

   - sched: cls_u32: fix netns refcount changes in u32_change()

   - smc: fix sock leak when release after smc_shutdown()

   - xfrm: limit skb_page_frag_refill use to a single page

   - eth: atlantic: invert deep par in pm functions, preventing null
     derefs

   - eth: stmmac: use readl_poll_timeout_atomic() in atomic state

  Previous releases - always broken:

   - gre: fix skb_under_panic on xmit

   - openvswitch: fix OOB access in reserve_sfa_size()

   - dsa: hellcreek: calculate checksums in tagger

   - eth: ice: fix crash in switchdev mode

   - eth: igc:
      - fix infinite loop in release_swfw_sync
      - fix scheduling while atomic"

* tag 'net-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits)
  drivers: net: hippi: Fix deadlock in rr_close()
  selftests: mlxsw: vxlan_flooding_ipv6: Prevent flooding of unwanted packets
  selftests: mlxsw: vxlan_flooding: Prevent flooding of unwanted packets
  nfc: MAINTAINERS: add Bug entry
  net: stmmac: Use readl_poll_timeout_atomic() in atomic state
  doc/ip-sysctl: add bc_forwarding
  netlink: reset network and mac headers in netlink_dump()
  net: mscc: ocelot: fix broken IP multicast flooding
  net: dsa: hellcreek: Calculate checksums in tagger
  net: atlantic: invert deep par in pm functions, preventing null derefs
  can: isotp: stop timeout monitoring when no first frame was sent
  bonding: do not discard lowest hash bit for non layer3+4 hashing
  net: lan966x: Make sure to release ptp interrupt
  ipv6: make ip6_rt_gc_expire an atomic_t
  net: Handle l3mdev in ip_tunnel_init_flow
  l3mdev: l3mdev_master_upper_ifindex_by_index_rcu should be using netdev_master_upper_dev_get_rcu
  net/sched: cls_u32: fix possible leak in u32_init_knode()
  net/sched: cls_u32: fix netns refcount changes in u32_change()
  powerpc: Update MAINTAINERS for ibmvnic and VAS
  net: restore alpha order to Ethernet devices in config
  ...

2 years agoALSA: hda/realtek: Add quirk for Clevo NP70PNP
Tim Crawford [Thu, 21 Apr 2022 17:04:12 +0000 (11:04 -0600)]
ALSA: hda/realtek: Add quirk for Clevo NP70PNP

Fixes headset detection on Clevo NP70PNP.

Signed-off-by: Tim Crawford <tcrawford@system76.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220421170412.3697-1-tcrawford@system76.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2 years agoALSA: hda: intel-dsp-config: Add RaptorLake PCI IDs
Gongjun Song [Thu, 21 Apr 2022 16:35:46 +0000 (11:35 -0500)]
ALSA: hda: intel-dsp-config: Add RaptorLake PCI IDs

Add RaptorLake-P PCI IDs

Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Gongjun Song <gongjun.song@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220421163546.319604-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2 years agojbd2: fix a potential race while discarding reserved buffers after an abort
Ye Bin [Thu, 17 Mar 2022 14:21:37 +0000 (22:21 +0800)]
jbd2: fix a potential race while discarding reserved buffers after an abort

we got issue as follows:
[   72.796117] EXT4-fs error (device sda): ext4_journal_check_start:83: comm fallocate: Detected aborted journal
[   72.826847] EXT4-fs (sda): Remounting filesystem read-only
fallocate: fallocate failed: Read-only file system
[   74.791830] jbd2_journal_commit_transaction: jh=0xffff9cfefe725d90 bh=0x0000000000000000 end delay
[   74.793597] ------------[ cut here ]------------
[   74.794203] kernel BUG at fs/jbd2/transaction.c:2063!
[   74.794886] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[   74.795533] CPU: 4 PID: 2260 Comm: jbd2/sda-8 Not tainted 5.17.0-rc8-next-20220315-dirty #150
[   74.798327] RIP: 0010:__jbd2_journal_unfile_buffer+0x3e/0x60
[   74.801971] RSP: 0018:ffffa828c24a3cb8 EFLAGS: 00010202
[   74.802694] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[   74.803601] RDX: 0000000000000001 RSI: ffff9cfefe725d90 RDI: ffff9cfefe725d90
[   74.804554] RBP: ffff9cfefe725d90 R08: 0000000000000000 R09: ffffa828c24a3b20
[   74.805471] R10: 0000000000000001 R11: 0000000000000001 R12: ffff9cfefe725d90
[   74.806385] R13: ffff9cfefe725d98 R14: 0000000000000000 R15: ffff9cfe833a4d00
[   74.807301] FS:  0000000000000000(0000) GS:ffff9d01afb00000(0000) knlGS:0000000000000000
[   74.808338] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   74.809084] CR2: 00007f2b81bf4000 CR3: 0000000100056000 CR4: 00000000000006e0
[   74.810047] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   74.810981] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   74.811897] Call Trace:
[   74.812241]  <TASK>
[   74.812566]  __jbd2_journal_refile_buffer+0x12f/0x180
[   74.813246]  jbd2_journal_refile_buffer+0x4c/0xa0
[   74.813869]  jbd2_journal_commit_transaction.cold+0xa1/0x148
[   74.817550]  kjournald2+0xf8/0x3e0
[   74.819056]  kthread+0x153/0x1c0
[   74.819963]  ret_from_fork+0x22/0x30

Above issue may happen as follows:
        write                   truncate                   kjournald2
generic_perform_write
 ext4_write_begin
  ext4_walk_page_buffers
   do_journal_get_write_access ->add BJ_Reserved list
 ext4_journalled_write_end
  ext4_walk_page_buffers
   write_end_fn
    ext4_handle_dirty_metadata
                ***************JBD2 ABORT**************
     jbd2_journal_dirty_metadata
 -> return -EROFS, jh in reserved_list
                                                   jbd2_journal_commit_transaction
                                                    while (commit_transaction->t_reserved_list)
                                                      jh = commit_transaction->t_reserved_list;
                        truncate_pagecache_range
                         do_invalidatepage
  ext4_journalled_invalidatepage
   jbd2_journal_invalidatepage
    journal_unmap_buffer
     __dispose_buffer
      __jbd2_journal_unfile_buffer
       jbd2_journal_put_journal_head ->put last ref_count
        __journal_remove_journal_head
 bh->b_private = NULL;
 jh->b_bh = NULL;
                      jbd2_journal_refile_buffer(journal, jh);
bh = jh2bh(jh);
->bh is NULL, later will trigger null-ptr-deref
 journal_free_journal_head(jh);

After commit 96f1e0974575, we no longer hold the j_state_lock while
iterating over the list of reserved handles in
jbd2_journal_commit_transaction().  This potentially allows the
journal_head to be freed by journal_unmap_buffer while the commit
codepath is also trying to free the BJ_Reserved buffers.  Keeping
j_state_lock held while trying extends hold time of the lock
minimally, and solves this issue.

Fixes: 96f1e0974575("jbd2: avoid long hold times of j_state_lock while committing a transaction")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220317142137.1821590-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2 years agoKVM: SVM: Flush when freeing encrypted pages even on SME_COHERENT CPUs
Mingwei Zhang [Thu, 21 Apr 2022 03:14:06 +0000 (03:14 +0000)]
KVM: SVM: Flush when freeing encrypted pages even on SME_COHERENT CPUs

Use clflush_cache_range() to flush the confidential memory when
SME_COHERENT is supported in AMD CPU. Cache flush is still needed since
SME_COHERENT only support cache invalidation at CPU side. All confidential
cache lines are still incoherent with DMA devices.

Cc: stable@vger.kerel.org
Fixes: add5e2f04541 ("KVM: SVM: Add support for the SEV-ES VMSA")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Message-Id: <20220421031407.2516575-3-mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2 years agoKVM: SVM: Simplify and harden helper to flush SEV guest page(s)
Sean Christopherson [Thu, 21 Apr 2022 03:14:05 +0000 (03:14 +0000)]
KVM: SVM: Simplify and harden helper to flush SEV guest page(s)

Rework sev_flush_guest_memory() to explicitly handle only a single page,
and harden it to fall back to WBINVD if VM_PAGE_FLUSH fails.  Per-page
flushing is currently used only to flush the VMSA, and in its current
form, the helper is completely broken with respect to flushing actual
guest memory, i.e. won't work correctly for an arbitrary memory range.

VM_PAGE_FLUSH takes a host virtual address, and is subject to normal page
walks, i.e. will fault if the address is not present in the host page
tables or does not have the correct permissions.  Current AMD CPUs also
do not honor SMAP overrides (undocumented in kernel versions of the APM),
so passing in a userspace address is completely out of the question.  In
other words, KVM would need to manually walk the host page tables to get
the pfn, ensure the pfn is stable, and then use the direct map to invoke
VM_PAGE_FLUSH.  And the latter might not even work, e.g. if userspace is
particularly evil/clever and backs the guest with Secret Memory (which
unmaps memory from the direct map).

Signed-off-by: Sean Christopherson <seanjc@google.com>
Fixes: add5e2f04541 ("KVM: SVM: Add support for the SEV-ES VMSA")
Reported-by: Mingwei Zhang <mizhang@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Message-Id: <20220421031407.2516575-2-mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2 years agoKVM: selftests: Silence compiler warning in the kvm_page_table_test
Thomas Huth [Thu, 14 Apr 2022 10:30:31 +0000 (12:30 +0200)]
KVM: selftests: Silence compiler warning in the kvm_page_table_test

When compiling kvm_page_table_test.c, I get this compiler warning
with gcc 11.2:

kvm_page_table_test.c: In function 'pre_init_before_test':
../../../../tools/include/linux/kernel.h:44:24: warning: comparison of
 distinct pointer types lacks a cast
   44 |         (void) (&_max1 == &_max2);              \
      |                        ^~
kvm_page_table_test.c:281:21: note: in expansion of macro 'max'
  281 |         alignment = max(0x100000, alignment);
      |                     ^~~

Fix it by adjusting the type of the absolute value.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20220414103031.565037-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2 years agoKVM: x86/pmu: Update AMD PMC sample period to fix guest NMI-watchdog
Like Xu [Sat, 9 Apr 2022 01:52:26 +0000 (09:52 +0800)]
KVM: x86/pmu: Update AMD PMC sample period to fix guest NMI-watchdog

NMI-watchdog is one of the favorite features of kernel developers,
but it does not work in AMD guest even with vPMU enabled and worse,
the system misrepresents this capability via /proc.

This is a PMC emulation error. KVM does not pass the latest valid
value to perf_event in time when guest NMI-watchdog is running, thus
the perf_event corresponding to the watchdog counter will enter the
old state at some point after the first guest NMI injection, forcing
the hardware register PMC0 to be constantly written to 0x800000000001.

Meanwhile, the running counter should accurately reflect its new value
based on the latest coordinated pmc->counter (from vPMC's point of view)
rather than the value written directly by the guest.

Fixes: 168d918f2643 ("KVM: x86: Adjust counter sample period after a wrmsr")
Reported-by: Dongli Cao <caodongli@kingsoft.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Tested-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20220409015226.38619-1-likexu@tencent.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2 years agox86/kvm: Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resume
Wanpeng Li [Mon, 18 Apr 2022 07:42:32 +0000 (00:42 -0700)]
x86/kvm: Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resume

MSR_KVM_POLL_CONTROL is cleared on reset, thus reverting guests to
host-side polling after suspend/resume.  Non-bootstrap CPUs are
restored correctly by the haltpoll driver because they are hot-unplugged
during suspend and hot-plugged during resume; however, the BSP
is not hotpluggable and remains in host-sde polling mode after
the guest resume.  The makes the guest pay for the cost of vmexits
every time the guest enters idle.

Fix it by recording BSP's haltpoll state and resuming it during guest
resume.

Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1650267752-46796-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2 years agoKVM: SPDX style and spelling fixes
Tom Rix [Sun, 10 Apr 2022 15:38:40 +0000 (11:38 -0400)]
KVM: SPDX style and spelling fixes

SPDX comments use use /* */ style comments in headers anad
// style comments in .c files.  Also fix two spelling mistakes.

Signed-off-by: Tom Rix <trix@redhat.com>
Message-Id: <20220410153840.55506-1-trix@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2 years agoKVM: x86: Skip KVM_GUESTDBG_BLOCKIRQ APICv update if APICv is disabled
Sean Christopherson [Wed, 20 Apr 2022 01:37:32 +0000 (01:37 +0000)]
KVM: x86: Skip KVM_GUESTDBG_BLOCKIRQ APICv update if APICv is disabled

Skip the APICv inhibit update for KVM_GUESTDBG_BLOCKIRQ if APICv is
disabled at the module level to avoid having to acquire the mutex and
potentially process all vCPUs. The DISABLE inhibit will (barring bugs)
never be lifted, so piling on more inhibits is unnecessary.

Fixes: cae72dcc3b21 ("KVM: x86: inhibit APICv when KVM_GUESTDBG_BLOCKIRQ active")
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220420013732.3308816-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2 years agoKVM: x86: Pend KVM_REQ_APICV_UPDATE during vCPU creation to fix a race
Sean Christopherson [Wed, 20 Apr 2022 01:37:31 +0000 (01:37 +0000)]
KVM: x86: Pend KVM_REQ_APICV_UPDATE during vCPU creation to fix a race

Make a KVM_REQ_APICV_UPDATE request when creating a vCPU with an
in-kernel local APIC and APICv enabled at the module level.  Consuming
kvm_apicv_activated() and stuffing vcpu->arch.apicv_active directly can
race with __kvm_set_or_clear_apicv_inhibit(), as vCPU creation happens
before the vCPU is fully onlined, i.e. it won't get the request made to
"all" vCPUs.  If APICv is globally inhibited between setting apicv_active
and onlining the vCPU, the vCPU will end up running with APICv enabled
and trigger KVM's sanity check.

Mark APICv as active during vCPU creation if APICv is enabled at the
module level, both to be optimistic about it's final state, e.g. to avoid
additional VMWRITEs on VMX, and because there are likely bugs lurking
since KVM checks apicv_active in multiple vCPU creation paths.  While
keeping the current behavior of consuming kvm_apicv_activated() is
arguably safer from a regression perspective, force apicv_active so that
vCPU creation runs with deterministic state and so that if there are bugs,
they are found sooner than later, i.e. not when some crazy race condition
is hit.

  WARNING: CPU: 0 PID: 484 at arch/x86/kvm/x86.c:9877 vcpu_enter_guest+0x2ae3/0x3ee0 arch/x86/kvm/x86.c:9877
  Modules linked in:
  CPU: 0 PID: 484 Comm: syz-executor361 Not tainted 5.16.13 #2
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1~cloud0 04/01/2014
  RIP: 0010:vcpu_enter_guest+0x2ae3/0x3ee0 arch/x86/kvm/x86.c:9877
  Call Trace:
   <TASK>
   vcpu_run arch/x86/kvm/x86.c:10039 [inline]
   kvm_arch_vcpu_ioctl_run+0x337/0x15e0 arch/x86/kvm/x86.c:10234
   kvm_vcpu_ioctl+0x4d2/0xc80 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3727
   vfs_ioctl fs/ioctl.c:51 [inline]
   __do_sys_ioctl fs/ioctl.c:874 [inline]
   __se_sys_ioctl fs/ioctl.c:860 [inline]
   __x64_sys_ioctl+0x16d/0x1d0 fs/ioctl.c:860
   do_syscall_x64 arch/x86/entry/common.c:50 [inline]
   do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80
   entry_SYSCALL_64_after_hwframe+0x44/0xae

The bug was hit by a syzkaller spamming VM creation with 2 vCPUs and a
call to KVM_SET_GUEST_DEBUG.

  r0 = openat$kvm(0xffffffffffffff9c, &(0x7f0000000000), 0x0, 0x0)
  r1 = ioctl$KVM_CREATE_VM(r0, 0xae01, 0x0)
  ioctl$KVM_CAP_SPLIT_IRQCHIP(r1, 0x4068aea3, &(0x7f0000000000)) (async)
  r2 = ioctl$KVM_CREATE_VCPU(r1, 0xae41, 0x0) (async)
  r3 = ioctl$KVM_CREATE_VCPU(r1, 0xae41, 0x400000000000002)
  ioctl$KVM_SET_GUEST_DEBUG(r3, 0x4048ae9b, &(0x7f00000000c0)={0x5dda9c14aa95f5c5})
  ioctl$KVM_RUN(r2, 0xae80, 0x0)

Reported-by: Gaoning Pan <pgn@zju.edu.cn>
Reported-by: Yongkang Jia <kangel@zju.edu.cn>
Fixes: 8df14af42f00 ("kvm: x86: Add support for dynamic APICv activation")
Cc: stable@vger.kernel.org
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220420013732.3308816-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2 years agoKVM: nVMX: Defer APICv updates while L2 is active until L1 is active
Sean Christopherson [Wed, 20 Apr 2022 01:37:30 +0000 (01:37 +0000)]
KVM: nVMX: Defer APICv updates while L2 is active until L1 is active

Defer APICv updates that occur while L2 is active until nested VM-Exit,
i.e. until L1 regains control.  vmx_refresh_apicv_exec_ctrl() assumes L1
is active and (a) stomps all over vmcs02 and (b) neglects to ever updated
vmcs01.  E.g. if vmcs12 doesn't enable the TPR shadow for L2 (and thus no
APICv controls), L1 performs nested VM-Enter APICv inhibited, and APICv
becomes unhibited while L2 is active, KVM will set various APICv controls
in vmcs02 and trigger a failed VM-Entry.  The kicker is that, unless
running with nested_early_check=1, KVM blames L1 and chaos ensues.

In all cases, ignoring vmcs02 and always deferring the inhibition change
to vmcs01 is correct (or at least acceptable).  The ABSENT and DISABLE
inhibitions cannot truly change while L2 is active (see below).

IRQ_BLOCKING can change, but it is firmly a best effort debug feature.
Furthermore, only L2's APIC is accelerated/virtualized to the full extent
possible, e.g. even if L1 passes through its APIC to L2, normal MMIO/MSR
interception will apply to the virtual APIC managed by KVM.
The exception is the SELF_IPI register when x2APIC is enabled, but that's
an acceptable hole.

Lastly, Hyper-V's Auto EOI can technically be toggled if L1 exposes the
MSRs to L2, but for that to work in any sane capacity, L1 would need to
pass through IRQs to L2 as well, and IRQs must be intercepted to enable
virtual interrupt delivery.  I.e. exposing Auto EOI to L2 and enabling
VID for L2 are, for all intents and purposes, mutually exclusive.

Lack of dynamic toggling is also why this scenario is all but impossible
to encounter in KVM's current form.  But a future patch will pend an
APICv update request _during_ vCPU creation to plug a race where a vCPU
that's being created doesn't get included in the "all vCPUs request"
because it's not yet visible to other vCPUs.  If userspaces restores L2
after VM creation (hello, KVM selftests), the first KVM_RUN will occur
while L2 is active and thus service the APICv update request made during
VM creation.

Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220420013732.3308816-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2 years agoKVM: x86: Tag APICv DISABLE inhibit, not ABSENT, if APICv is disabled
Sean Christopherson [Wed, 20 Apr 2022 01:37:29 +0000 (01:37 +0000)]
KVM: x86: Tag APICv DISABLE inhibit, not ABSENT, if APICv is disabled

Set the DISABLE inhibit, not the ABSENT inhibit, if APICv is disabled via
module param.  A recent refactoring to add a wrapper for setting/clearing
inhibits unintentionally changed the flag, probably due to a copy+paste
goof.

Fixes: 4f4c4a3ee53c ("KVM: x86: Trace all APICv inhibit changes and capture overall status")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220420013732.3308816-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2 years agoKVM: Initialize debugfs_dentry when a VM is created to avoid NULL deref
Sean Christopherson [Fri, 15 Apr 2022 00:46:22 +0000 (00:46 +0000)]
KVM: Initialize debugfs_dentry when a VM is created to avoid NULL deref

Initialize debugfs_entry to its semi-magical -ENOENT value when the VM
is created.  KVM's teardown when VM creation fails is kludgy and calls
kvm_uevent_notify_change() and kvm_destroy_vm_debugfs() even if KVM never
attempted kvm_create_vm_debugfs().  Because debugfs_entry is zero
initialized, the IS_ERR() checks pass and KVM derefs a NULL pointer.

  BUG: kernel NULL pointer dereference, address: 0000000000000018
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 1068b1067 P4D 1068b1067 PUD 1068b0067 PMD 0
  Oops: 0000 [#1] SMP
  CPU: 0 PID: 871 Comm: repro Not tainted 5.18.0-rc1+ #825
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
  RIP: 0010:__dentry_path+0x7b/0x130
  Call Trace:
   <TASK>
   dentry_path_raw+0x42/0x70
   kvm_uevent_notify_change.part.0+0x10c/0x200 [kvm]
   kvm_put_kvm+0x63/0x2b0 [kvm]
   kvm_dev_ioctl+0x43a/0x920 [kvm]
   __x64_sys_ioctl+0x83/0xb0
   do_syscall_64+0x31/0x50
   entry_SYSCALL_64_after_hwframe+0x44/0xae
   </TASK>
  Modules linked in: kvm_intel kvm irqbypass

Fixes: a44a4cc1c969 ("KVM: Don't create VM debugfs files outside of the VM directory")
Cc: stable@vger.kernel.org
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oupton@google.com>
Reported-by: syzbot+df6fbbd2ee39f21289ef@syzkaller.appspotmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Message-Id: <20220415004622.2207751-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2 years agoKVM: Add helpers to wrap vcpu->srcu_idx and yell if it's abused
Sean Christopherson [Fri, 15 Apr 2022 00:43:43 +0000 (00:43 +0000)]
KVM: Add helpers to wrap vcpu->srcu_idx and yell if it's abused

Add wrappers to acquire/release KVM's SRCU lock when stashing the index
in vcpu->src_idx, along with rudimentary detection of illegal usage,
e.g. re-acquiring SRCU and thus overwriting vcpu->src_idx.  Because the
SRCU index is (currently) either 0 or 1, illegal nesting bugs can go
unnoticed for quite some time and only cause problems when the nested
lock happens to get a different index.

Wrap the WARNs in PROVE_RCU=y, and make them ONCE, otherwise KVM will
likely yell so loudly that it will bring the kernel to its knees.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220415004343.2203171-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2 years agoKVM: RISC-V: Use kvm_vcpu.srcu_idx, drop RISC-V's unnecessary copy
Sean Christopherson [Fri, 15 Apr 2022 00:43:42 +0000 (00:43 +0000)]
KVM: RISC-V: Use kvm_vcpu.srcu_idx, drop RISC-V's unnecessary copy

Use the generic kvm_vcpu's srcu_idx instead of using an indentical field
in RISC-V's version of kvm_vcpu_arch.  Generic KVM very intentionally
does not touch vcpu->srcu_idx, i.e. there's zero chance of running afoul
of common code.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220415004343.2203171-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2 years agoKVM: x86: Don't re-acquire SRCU lock in complete_emulated_io()
Sean Christopherson [Fri, 15 Apr 2022 00:43:41 +0000 (00:43 +0000)]
KVM: x86: Don't re-acquire SRCU lock in complete_emulated_io()

Don't re-acquire SRCU in complete_emulated_io() now that KVM acquires the
lock in kvm_arch_vcpu_ioctl_run().  More importantly, don't overwrite
vcpu->srcu_idx.  If the index acquired by complete_emulated_io() differs
from the one acquired by kvm_arch_vcpu_ioctl_run(), KVM will effectively
leak a lock and hang if/when synchronize_srcu() is invoked for the
relevant grace period.

Fixes: 8d25b7beca7e ("KVM: x86: pull kvm->srcu read-side to kvm_arch_vcpu_ioctl_run")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220415004343.2203171-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2 years agoMerge tag 'kvm-riscv-fixes-5.18-2' of https://github.com/kvm-riscv/linux into HEAD
Paolo Bonzini [Thu, 21 Apr 2022 15:58:57 +0000 (11:58 -0400)]
Merge tag 'kvm-riscv-fixes-5.18-2' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv fixes for 5.18, take #2

- Remove 's' & 'u' as valid ISA extension

- Do not allow disabling the base extensions 'i'/'m'/'a'/'c'

2 years agofs: unset MNT_WRITE_HOLD on failure
Christian Brauner [Wed, 20 Apr 2022 13:19:25 +0000 (15:19 +0200)]
fs: unset MNT_WRITE_HOLD on failure

After mnt_hold_writers() has been called we will always have set MNT_WRITE_HOLD
and consequently we always need to pair mnt_hold_writers() with
mnt_unhold_writers(). After the recent cleanup in [1] where Al switched from a
do-while to a for loop the cleanup currently fails to unset MNT_WRITE_HOLD for
the first mount that was changed. Fix this and make sure that the first mount
will be cleaned up and add some comments to make it more obvious.

Link: https://lore.kernel.org/lkml/0000000000007cc21d05dd0432b8@google.com
Link: https://lore.kernel.org/lkml/00000000000080e10e05dd043247@google.com
Link: https://lore.kernel.org/r/20220420131925.2464685-1-brauner@kernel.org
Fixes: e257039f0fc7 ("mount_setattr(): clean the control flow and calling conventions") [1]
Cc: Hillf Danton <hdanton@sina.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: syzbot+10a16d1c43580983f6a2@syzkaller.appspotmail.com
Reported-by: syzbot+306090cfa3294f0bbfb3@syzkaller.appspotmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2 years agodrm/amdgpu: partial revert "remove ctx->lock" v2
Christian König [Fri, 8 Apr 2022 14:22:55 +0000 (16:22 +0200)]
drm/amdgpu: partial revert "remove ctx->lock" v2

This reverts commit 461fa7b0ac565ef25c1da0ced31005dd437883a7.

We are missing some inter dependencies here so re-introduce the lock
until we have figured out what's missing. Just drop/retake it while
adding dependencies.

v2: still drop the lock while adding dependencies

Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> (v1)
Fixes: 461fa7b0ac56 ("drm/amdgpu: remove ctx->lock")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220419110633.166236-1-christian.koenig@amd.com
2 years agodrivers: net: hippi: Fix deadlock in rr_close()
Duoming Zhou [Sun, 17 Apr 2022 12:55:19 +0000 (20:55 +0800)]
drivers: net: hippi: Fix deadlock in rr_close()

There is a deadlock in rr_close(), which is shown below:

   (Thread 1)                |      (Thread 2)
                             | rr_open()
rr_close()                   |  add_timer()
 spin_lock_irqsave() //(1)   |  (wait a time)
 ...                         | rr_timer()
 del_timer_sync()            |  spin_lock_irqsave() //(2)
 (wait timer to stop)        |  ...

We hold rrpriv->lock in position (1) of thread 1 and
use del_timer_sync() to wait timer to stop, but timer handler
also need rrpriv->lock in position (2) of thread 2.
As a result, rr_close() will block forever.

This patch extracts del_timer_sync() from the protection of
spin_lock_irqsave(), which could let timer handler to obtain
the needed lock.

Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220417125519.82618-1-duoming@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2 years agoALSA: hda/realtek: Enable mute/micmute LEDs and limit mic boost on EliteBook 845...
Andy Chi [Thu, 21 Apr 2022 06:36:04 +0000 (14:36 +0800)]
ALSA: hda/realtek: Enable mute/micmute LEDs and limit mic boost on EliteBook 845/865 G9

On HP EliteBook 845 G9 and EliteBook 865 G9, the audio LEDs can be enabled by
ALC285_FIXUP_HP_MUTE_LED. So use it accordingly.

Signed-off-by: Andy Chi <andy.chi@canonical.com>
Fixes: 07bcab93946c ("ALSA: hda/realtek: Add support for HP Laptops")
Link: https://lore.kernel.org/r/20220421063606.39772-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2 years agoRevert "drm: of: Lookup if child node has panel or bridge"
Bjorn Andersson [Wed, 20 Apr 2022 23:12:30 +0000 (16:12 -0700)]
Revert "drm: of: Lookup if child node has panel or bridge"

Commit '80253168dbfd ("drm: of: Lookup if child node has panel or
bridge")' attempted to simplify the case of expressing a simple panel
under a DSI controller, by assuming that the first non-graph child node
was a panel or bridge.

Unfortunately for non-trivial cases the first child node might not be a
panel or bridge.  Examples of this can be a aux-bus in the case of
DisplayPort, or an opp-table represented before the panel node.

In these cases the reverted commit prevents the caller from ever finding
a reference to the panel.

This reverts commit '80253168dbfd ("drm: of: Lookup if child node has
panel or bridge")', in favor of using an explicit graph reference to the
panel in the trivial case as well.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220420231230.58499-2-bjorn.andersson@linaro.org
2 years agoRevert "drm: of: Properly try all possible cases for bridge/panel detection"
Bjorn Andersson [Wed, 20 Apr 2022 23:12:29 +0000 (16:12 -0700)]
Revert "drm: of: Properly try all possible cases for bridge/panel detection"

Commit '80253168dbfd ("drm: of: Lookup if child node has panel or
bridge")' introduced the ability to describe a panel under a display
controller without having to use a graph to connect the controller to
its single child panel (or bridge).

The implementation of this would find the first non-graph node and
attempt to acquire the related panel or bridge. This prevents cases
where any other child node, such as a aux bus for a DisplayPort
controller, or an opp-table to find the referenced panel.

Commit '67bae5f28c89 ("drm: of: Properly try all possible cases for
bridge/panel detection")' attempted to solve this problem by not
bypassing the graph reference lookup before attempting to find the panel
or bridge.

While this does solve the case where a proper graph reference is
present, it does not allow the caller to distinguish between a
yet-to-be-probed panel or bridge and the absence of a reference to a
panel.

One such case is a DisplayPort controller that on some boards have an
explicitly described reference to a panel, but on others have a
discoverable DisplayPort display attached (which doesn't need to be
expressed in DeviceTree).

This reverts commit '67bae5f28c89 ("drm: of: Properly try all possible
cases for bridge/panel detection")', as a step towards reverting commit
'80253168dbfd ("drm: of: Lookup if child node has panel or bridge")'.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220420231230.58499-1-bjorn.andersson@linaro.org
2 years agodrm/vc4: Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage
Miaoqian Lin [Wed, 20 Apr 2022 13:50:07 +0000 (21:50 +0800)]
drm/vc4: Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage

If the device is already in a runtime PM enabled state
pm_runtime_get_sync() will return 1.

Also, we need to call pm_runtime_put_noidle() when pm_runtime_get_sync()
fails, so use pm_runtime_resume_and_get() instead. this function
will handle this.

Fixes: 4078f5757144 ("drm/vc4: Add DSI driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220420135008.2757-1-linmq006@gmail.com
2 years agocifs: destage any unwritten data to the server before calling copychunk_write
Ronnie Sahlberg [Thu, 21 Apr 2022 01:15:36 +0000 (11:15 +1000)]
cifs: destage any unwritten data to the server before calling copychunk_write

because the copychunk_write might cover a region of the file that has not yet
been sent to the server and thus fail.

A simple way to reproduce this is:
truncate -s 0 /mnt/testfile; strace -f -o x -ttT xfs_io -i -f -c 'pwrite 0k 128k' -c 'fcollapse 16k 24k' /mnt/testfile

the issue is that the 'pwrite 0k 128k' becomes rearranged on the wire with
the 'fcollapse 16k 24k' due to write-back caching.

fcollapse is implemented in cifs.ko as a SMB2 IOCTL(COPYCHUNK_WRITE) call
and it will fail serverside since the file is still 0b in size serverside
until the writes have been destaged.
To avoid this we must ensure that we destage any unwritten data to the
server before calling COPYCHUNK_WRITE.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1997373
Reported-by: Xiaoli Feng <xifeng@redhat.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2 years agocifs: use correct lock type in cifs_reconnect()
Paulo Alcantara [Thu, 21 Apr 2022 00:05:46 +0000 (21:05 -0300)]
cifs: use correct lock type in cifs_reconnect()

TCP_Server_Info::origin_fullpath and TCP_Server_Info::leaf_fullpath
are protected by refpath_lock mutex and not cifs_tcp_ses_lock
spinlock.

Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@vger.kernel.org
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2 years agocifs: fix NULL ptr dereference in refresh_mounts()
Paulo Alcantara [Thu, 21 Apr 2022 00:05:45 +0000 (21:05 -0300)]
cifs: fix NULL ptr dereference in refresh_mounts()

Either mount(2) or automount might not have server->origin_fullpath
set yet while refresh_cache_worker() is attempting to refresh DFS
referrals.  Add missing NULL check and locking around it.

This fixes bellow crash:

[ 1070.276835] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI
[ 1070.277676] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[ 1070.278219] CPU: 1 PID: 8506 Comm: kworker/u8:1 Not tainted 5.18.0-rc3 #10
[ 1070.278701] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014
[ 1070.279495] Workqueue: cifs-dfscache refresh_cache_worker [cifs]
[ 1070.280044] RIP: 0010:strcasecmp+0x34/0x150
[ 1070.280359] Code: 00 00 00 fc ff df 41 54 55 48 89 fd 53 48 83 ec 10 eb 03 4c 89 fe 48 89 ef 48 83 c5 01 48 89 f8 48 89 fa 48 c1 e8 03 83 e2 07 <42> 0f b6 04 28 38 d0 7f 08 84 c0 0f 85 bc 00 00 00 0f b6 45 ff 44
[ 1070.281729] RSP: 0018:ffffc90008367958 EFLAGS: 00010246
[ 1070.282114] RAX: 0000000000000000 RBX: dffffc0000000000 RCX: 0000000000000000
[ 1070.282691] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 1070.283273] RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffff873eda27
[ 1070.283857] R10: ffffc900083679a0 R11: 0000000000000001 R12: ffff88812624c000
[ 1070.284436] R13: dffffc0000000000 R14: ffff88810e6e9a88 R15: ffff888119bb9000
[ 1070.284990] FS:  0000000000000000(0000) GS:ffff888151200000(0000) knlGS:0000000000000000
[ 1070.285625] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1070.286100] CR2: 0000561a4d922418 CR3: 000000010aecc000 CR4: 0000000000350ee0
[ 1070.286683] Call Trace:
[ 1070.286890]  <TASK>
[ 1070.287070]  refresh_cache_worker+0x895/0xd20 [cifs]
[ 1070.287475]  ? __refresh_tcon.isra.0+0xfb0/0xfb0 [cifs]
[ 1070.287905]  ? __lock_acquire+0xcd1/0x6960
[ 1070.288247]  ? is_dynamic_key+0x1a0/0x1a0
[ 1070.288591]  ? lockdep_hardirqs_on_prepare+0x410/0x410
[ 1070.289012]  ? lock_downgrade+0x6f0/0x6f0
[ 1070.289318]  process_one_work+0x7bd/0x12d0
[ 1070.289637]  ? worker_thread+0x160/0xec0
[ 1070.289970]  ? pwq_dec_nr_in_flight+0x230/0x230
[ 1070.290318]  ? _raw_spin_lock_irq+0x5e/0x90
[ 1070.290619]  worker_thread+0x5ac/0xec0
[ 1070.290891]  ? process_one_work+0x12d0/0x12d0
[ 1070.291199]  kthread+0x2a5/0x350
[ 1070.291430]  ? kthread_complete_and_exit+0x20/0x20
[ 1070.291770]  ret_from_fork+0x22/0x30
[ 1070.292050]  </TASK>
[ 1070.292223] Modules linked in: bpfilter cifs cifs_arc4 cifs_md4
[ 1070.292765] ---[ end trace 0000000000000000 ]---
[ 1070.293108] RIP: 0010:strcasecmp+0x34/0x150
[ 1070.293471] Code: 00 00 00 fc ff df 41 54 55 48 89 fd 53 48 83 ec 10 eb 03 4c 89 fe 48 89 ef 48 83 c5 01 48 89 f8 48 89 fa 48 c1 e8 03 83 e2 07 <42> 0f b6 04 28 38 d0 7f 08 84 c0 0f 85 bc 00 00 00 0f b6 45 ff 44
[ 1070.297718] RSP: 0018:ffffc90008367958 EFLAGS: 00010246
[ 1070.298622] RAX: 0000000000000000 RBX: dffffc0000000000 RCX: 0000000000000000
[ 1070.299428] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 1070.300296] RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffff873eda27
[ 1070.301204] R10: ffffc900083679a0 R11: 0000000000000001 R12: ffff88812624c000
[ 1070.301932] R13: dffffc0000000000 R14: ffff88810e6e9a88 R15: ffff888119bb9000
[ 1070.302645] FS:  0000000000000000(0000) GS:ffff888151200000(0000) knlGS:0000000000000000
[ 1070.303462] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1070.304131] CR2: 0000561a4d922418 CR3: 000000010aecc000 CR4: 0000000000350ee0
[ 1070.305004] Kernel panic - not syncing: Fatal exception
[ 1070.305711] Kernel Offset: disabled
[ 1070.305971] ---[ end Kernel panic - not syncing: Fatal exception ]---

Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@vger.kernel.org
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2 years agodrm/vmwgfx: Fix gem refcounting and memory evictions
Zack Rusin [Wed, 20 Apr 2022 04:03:28 +0000 (00:03 -0400)]
drm/vmwgfx: Fix gem refcounting and memory evictions

v2: Add the last part of the ref count fix which was spotted by
Philipp Sieweck where the ref count of cpu writers is off due to
ERESTARTSYS or EBUSY during bo waits.

The initial GEM port broke refcounting on shareable (prime) surfaces and
memory evictions. The prime surfaces broke because the parent surfaces
weren't increasing the ref count on GEM surfaces, which meant that
the memory backing textures could have been deleted while the texture
was still accessible. The evictions broke due to a typo, the code was
supposed to exit if the passed buffers were not vmw_buffer_object
not if they were. They're tied because the evictions depend on having
memory to actually evict.

This fixes crashes with XA state tracker which is used for xrender
acceleration on xf86-video-vmware, apps/tests which use a lot of
memory (a good test being the piglit's streaming-texture-leak) and
desktops.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: 8afa13a0583f ("drm/vmwgfx: Implement DRIVER_GEM")
Reported-by: Philipp Sieweck <psi@informatik.uni-kiel.de>
Cc: <stable@vger.kernel.org> # v5.17+
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220420040328.1007409-1-zack@kde.org
2 years agoMerge tag 'xtensa-20220416' of https://github.com/jcmvbkbc/linux-xtensa
Linus Torvalds [Wed, 20 Apr 2022 19:43:27 +0000 (12:43 -0700)]
Merge tag 'xtensa-20220416' of https://github.com/jcmvbkbc/linux-xtensa

Pull xtensa fixes from Max Filippov:

 - fix patching CPU selection in patch_text

 - fix potential deadlock in ISS platform serial driver

 - fix potential register clobbering in coprocessor exception handler

* tag 'xtensa-20220416' of https://github.com/jcmvbkbc/linux-xtensa:
  xtensa: fix a7 clobbering in coprocessor context load/store
  arch: xtensa: platforms: Fix deadlock in rs_close()
  xtensa: patch_text: Fixup last cpu should be master

2 years agoMerge tag 'erofs-for-5.18-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Wed, 20 Apr 2022 19:35:20 +0000 (12:35 -0700)]
Merge tag 'erofs-for-5.18-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs

Pull erofs fixes from Gao Xiang:
 "One patch to fix a use-after-free race related to the on-stack
  z_erofs_decompressqueue, which happens very rarely but needs to be
  fixed properly soon.

  The other patch fixes some sysfs Sphinx warnings"

* tag 'erofs-for-5.18-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  Documentation/ABI: sysfs-fs-erofs: Fix Sphinx errors
  erofs: fix use-after-free of on-stack io[]

2 years agoRevert "fs/pipe: use kvcalloc to allocate a pipe_buffer array"
Linus Torvalds [Wed, 20 Apr 2022 19:07:53 +0000 (12:07 -0700)]
Revert "fs/pipe: use kvcalloc to allocate a pipe_buffer array"

This reverts commit 5a519c8fe4d620912385f94372fc8472fa98c662.

It turns out that making the pipe almost arbitrarily large has some
rather unexpected downsides.  The kernel test robot reports a kernel
warning that is due to pipe->max_usage now growing to the point where
the iter_file_splice_write() buffer allocation can no longer be
satisfied as a slab allocation, and the

        int nbufs = pipe->max_usage;
        struct bio_vec *array = kcalloc(nbufs, sizeof(struct bio_vec),
                                        GFP_KERNEL);

code sequence there will now always fail as a result.

That code could be modified to use kvcalloc() too, but I feel very
uncomfortable making those kinds of changes for a very niche use case
that really should have other options than make these kinds of
fundamental changes to pipe behavior.

Maybe the CRIU process dumping should be multi-threaded, and use
multiple pipes and multiple cores, rather than try to use one larger
pipe to minimize splice() calls.

Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/all/20220420073717.GD16310@xsang-OptiPlex-9020/
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2 years agox86: __memcpy_flushcache: fix wrong alignment if size > 2^32
Mikulas Patocka [Tue, 19 Apr 2022 13:56:23 +0000 (09:56 -0400)]
x86: __memcpy_flushcache: fix wrong alignment if size > 2^32

The first "if" condition in __memcpy_flushcache is supposed to align the
"dest" variable to 8 bytes and copy data up to this alignment.  However,
this condition may misbehave if "size" is greater than 4GiB.

The statement min_t(unsigned, size, ALIGN(dest, 8) - dest); casts both
arguments to unsigned int and selects the smaller one.  However, the
cast truncates high bits in "size" and it results in misbehavior.

For example:

suppose that size == 0x100000001, dest == 0x200000002
min_t(unsigned, size, ALIGN(dest, 8) - dest) == min_t(0x1, 0xe) == 0x1;
...
dest += 0x1;

so we copy just one byte "and" dest remains unaligned.

This patch fixes the bug by replacing unsigned with size_t.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2 years agoselftests: mlxsw: vxlan_flooding_ipv6: Prevent flooding of unwanted packets
Ido Schimmel [Tue, 19 Apr 2022 13:51:55 +0000 (16:51 +0300)]
selftests: mlxsw: vxlan_flooding_ipv6: Prevent flooding of unwanted packets

The test verifies that packets are correctly flooded by the bridge and
the VXLAN device by matching on the encapsulated packets at the other
end. However, if packets other than those generated by the test also
ingress the bridge (e.g., MLD packets), they will be flooded as well and
interfere with the expected count.

Make the test more robust by making sure that only the packets generated
by the test can ingress the bridge. Drop all the rest using tc filters
on the egress of 'br0' and 'h1'.

In the software data path, the problem can be solved by matching on the
inner destination MAC or dropping unwanted packets at the egress of the
VXLAN device, but this is not currently supported by mlxsw.

Fixes: d01724dd2a66 ("selftests: mlxsw: spectrum-2: Add a test for VxLAN flooding with IPv6")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2 years agoselftests: mlxsw: vxlan_flooding: Prevent flooding of unwanted packets
Ido Schimmel [Tue, 19 Apr 2022 13:51:54 +0000 (16:51 +0300)]
selftests: mlxsw: vxlan_flooding: Prevent flooding of unwanted packets

The test verifies that packets are correctly flooded by the bridge and
the VXLAN device by matching on the encapsulated packets at the other
end. However, if packets other than those generated by the test also
ingress the bridge (e.g., MLD packets), they will be flooded as well and
interfere with the expected count.

Make the test more robust by making sure that only the packets generated
by the test can ingress the bridge. Drop all the rest using tc filters
on the egress of 'br0' and 'h1'.

In the software data path, the problem can be solved by matching on the
inner destination MAC or dropping unwanted packets at the egress of the
VXLAN device, but this is not currently supported by mlxsw.

Fixes: 94d302deae25 ("selftests: mlxsw: Add a test for VxLAN flooding")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2 years agoALSA: usb-audio: Clear MIDI port active flag after draining
Takashi Iwai [Wed, 20 Apr 2022 13:02:47 +0000 (15:02 +0200)]
ALSA: usb-audio: Clear MIDI port active flag after draining

When a rawmidi output stream is closed, it calls the drain at first,
then does trigger-off only when the drain returns -ERESTARTSYS as a
fallback.  It implies that each driver should turn off the stream
properly after the drain.  Meanwhile, USB-audio MIDI interface didn't
change the port->active flag after the drain.  This may leave the
output work picking up the port that is closed right now, which
eventually leads to a use-after-free for the already released rawmidi
object.

This patch fixes the bug by properly clearing the port->active flag
after the output drain.

Reported-by: syzbot+70e777a39907d6d5fd0a@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/00000000000011555605dceaff03@google.com
Link: https://lore.kernel.org/r/20220420130247.22062-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2 years agodt-bindings: dmaengine: qcom: gpi: Add minItems for interrupts
Vinod Koul [Thu, 14 Apr 2022 06:42:35 +0000 (12:12 +0530)]
dt-bindings: dmaengine: qcom: gpi: Add minItems for interrupts

Add the minItems for interrupts property as well. In the absence of
this, we get warning if interrupts are less than 13

arch/arm64/boot/dts/qcom/qrb5165-rb5.dtb:
dma-controller@800000: interrupts: [[0, 588, 4], [0, 589, 4], [0, 590,
4], [0, 591, 4], [0, 592, 4], [0, 593, 4], [0, 594, 4], [0, 595, 4], [0,
  596, 4], [0, 597, 4]] is too short

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220414064235.1182195-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2 years agonfc: MAINTAINERS: add Bug entry
Krzysztof Kozlowski [Wed, 20 Apr 2022 10:46:01 +0000 (12:46 +0200)]
nfc: MAINTAINERS: add Bug entry

Add a Bug section, indicating preferred mailing method for bug reports,
to NFC Subsystem entry.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2 years agodmaengine: idxd: skip clearing device context when device is read-only
Dave Jiang [Mon, 11 Apr 2022 22:06:34 +0000 (15:06 -0700)]
dmaengine: idxd: skip clearing device context when device is read-only

If the device shows up as read-only configuration, skip the clearing of the
state as the context must be preserved for device re-enable after being
disabled.

Fixes: 0dcfe41e9a4c ("dmanegine: idxd: cleanup all device related bits after disabling device")
Reported-by: Tony Zhu <tony.zhu@intel.com>
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/164971479479.2200566.13980022473526292759.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2 years agodmaengine: idxd: add RO check for wq max_transfer_size write
Dave Jiang [Mon, 11 Apr 2022 22:08:01 +0000 (15:08 -0700)]
dmaengine: idxd: add RO check for wq max_transfer_size write

Block wq_max_transfer_size_store() when the device is configured as
read-only and not configurable.

Fixes: d7aad5550eca ("dmaengine: idxd: add support for configurable max wq xfer size")
Reported-by: Bernice Zhang <bernice.zhang@intel.com>
Tested-by: Bernice Zhang <bernice.zhang@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/164971488154.2200913.10706665404118545941.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2 years agodmaengine: idxd: add RO check for wq max_batch_size write
Dave Jiang [Mon, 11 Apr 2022 22:08:55 +0000 (15:08 -0700)]
dmaengine: idxd: add RO check for wq max_batch_size write

Block wq_max_batch_size_store() when the device is configured as read-only
and not configurable.

Fixes: e7184b159dd3 ("dmaengine: idxd: add support for configurable max wq batch size")
Reported-by: Bernice Zhang <bernice.zhang@intel.com>
Tested-by: Bernice Zhang <bernice.zhang@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/164971493551.2201159.1942042593642155209.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2 years agodmaengine: idxd: fix retry value to be constant for duration of function call
Dave Jiang [Mon, 18 Apr 2022 21:33:21 +0000 (14:33 -0700)]
dmaengine: idxd: fix retry value to be constant for duration of function call

When retries is compared to wq->enqcmds_retries each loop of idxd_enqcmds(),
wq->enqcmds_retries can potentially changed by user. Assign the value
of retries to wq->enqcmds_retries during initialization so it is the
original value set when entering the function.

Fixes: 7930d8553575 ("dmaengine: idxd: add knob for enqcmds retries")
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/165031760154.3658664.1983547716619266558.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2 years agodmaengine: idxd: match type for retries var in idxd_enqcmds()
Dave Jiang [Mon, 18 Apr 2022 21:31:10 +0000 (14:31 -0700)]
dmaengine: idxd: match type for retries var in idxd_enqcmds()

wq->enqcmds_retries is defined as unsigned int. However, retries on the
stack is defined as int. Change retries to unsigned int to compare the same
type.

Fixes: 7930d8553575 ("dmaengine: idxd: add knob for enqcmds retries")
Suggested-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/165031747059.3658198.6035308204505664375.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2 years agodmaengine: dw-edma: Fix inconsistent indenting
Jiapeng Chong [Wed, 13 Apr 2022 02:34:42 +0000 (10:34 +0800)]
dmaengine: dw-edma: Fix inconsistent indenting

Eliminate the follow smatch warning:

drivers/dma/dw-edma/dw-edma-v0-core.c:419 dw_edma_v0_core_start() warn:
inconsistent indenting.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220413023442.18856-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2 years agonet: stmmac: Use readl_poll_timeout_atomic() in atomic state
Kevin Hao [Tue, 19 Apr 2022 08:42:26 +0000 (16:42 +0800)]
net: stmmac: Use readl_poll_timeout_atomic() in atomic state

The init_systime() may be invoked in atomic state. We have observed the
following call trace when running "phc_ctl /dev/ptp0 set" on a Intel
Agilex board.
  BUG: sleeping function called from invalid context at drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c:74
  in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 381, name: phc_ctl
  preempt_count: 1, expected: 0
  RCU nest depth: 0, expected: 0
  Preemption disabled at:
  [<ffff80000892ef78>] stmmac_set_time+0x34/0x8c
  CPU: 2 PID: 381 Comm: phc_ctl Not tainted 5.18.0-rc2-next-20220414-yocto-standard+ #567
  Hardware name: SoCFPGA Agilex SoCDK (DT)
  Call trace:
   dump_backtrace.part.0+0xc4/0xd0
   show_stack+0x24/0x40
   dump_stack_lvl+0x7c/0xa0
   dump_stack+0x18/0x34
   __might_resched+0x154/0x1c0
   __might_sleep+0x58/0x90
   init_systime+0x78/0x120
   stmmac_set_time+0x64/0x8c
   ptp_clock_settime+0x60/0x9c
   pc_clock_settime+0x6c/0xc0
   __arm64_sys_clock_settime+0x88/0xf0
   invoke_syscall+0x5c/0x130
   el0_svc_common.constprop.0+0x4c/0x100
   do_el0_svc+0x7c/0xa0
   el0_svc+0x58/0xcc
   el0t_64_sync_handler+0xa4/0x130
   el0t_64_sync+0x18c/0x190

So we should use readl_poll_timeout_atomic() here instead of
readl_poll_timeout().

Also adjust the delay time to 10us to fix a "__bad_udelay" build error
reported by "kernel test robot <lkp@intel.com>". I have tested this on
Intel Agilex and NXP S32G boards, there is no delay needed at all.
So the 10us delay should be long enough for most cases.

Fixes: ff8ed737860e ("net: stmmac: use readl_poll_timeout() function in init_systime()")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2 years agodoc/ip-sysctl: add bc_forwarding
Nicolas Dichtel [Wed, 13 Apr 2022 14:00:00 +0000 (16:00 +0200)]
doc/ip-sysctl: add bc_forwarding

Let's describe this sysctl.

Fixes: 5cbf777cfdf6 ("route: add support for directed broadcast forwarding")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2 years agoRISC-V: KVM: Restrict the extensions that can be disabled
Atish Patra [Wed, 20 Apr 2022 01:32:58 +0000 (18:32 -0700)]
RISC-V: KVM: Restrict the extensions that can be disabled

Currently, the config isa register allows us to disable all allowed
single letter ISA extensions. It shouldn't be the case as vmm shouldn't
be able to disable base extensions (imac).

These extensions should always be enabled as long as they are enabled
in the host ISA.

Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Fixes: 92ad82002c39 ("RISC-V: KVM: Implement
KVM_GET_ONE_REG/KVM_SET_ONE_REG ioctls")

2 years agodrm/vc4: Fix build error when CONFIG_DRM_VC4=y && CONFIG_RASPBERRYPI_FIRMWARE=m
Zheng Bin [Mon, 11 Apr 2022 02:43:25 +0000 (10:43 +0800)]
drm/vc4: Fix build error when CONFIG_DRM_VC4=y && CONFIG_RASPBERRYPI_FIRMWARE=m

If CONFIG_DRM_VC4=y, CONFIG_RASPBERRYPI_FIRMWARE=m, CONFIG_COMPILE_TEST=n,
bulding fails:

drivers/gpu/drm/vc4/vc4_drv.o: In function `vc4_drm_bind':
vc4_drv.c:(.text+0x320): undefined reference to `rpi_firmware_get'
vc4_drv.c:(.text+0x320): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `rpi_firmware_get'
vc4_drv.c:(.text+0x34c): undefined reference to `rpi_firmware_property'
vc4_drv.c:(.text+0x34c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `rpi_firmware_property'
vc4_drv.c:(.text+0x354): undefined reference to `rpi_firmware_put'
vc4_drv.c:(.text+0x354): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `rpi_firmware_put'

Make DRM_VC4 depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE) to fix this.

Fixes: c406ad5e4a85 ("drm/vc4: Notify the firmware when DRM is in charge")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220411024325.3968413-1-zhengbin13@huawei.com
2 years agodrm/panel/raspberrypi-touchscreen: Initialise the bridge in prepare
Dave Stevenson [Fri, 15 Apr 2022 16:25:13 +0000 (18:25 +0200)]
drm/panel/raspberrypi-touchscreen: Initialise the bridge in prepare

The panel has a prepare call which is before video starts, and an
enable call which is after.
The Toshiba bridge should be configured before video, so move
the relevant power and initialisation calls to prepare.

Fixes: 2f733d6194bd ("drm/panel: Add support for the Raspberry Pi 7" Touchscreen.")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220415162513.42190-3-stefan.wahren@i2se.com
2 years agodrm/panel/raspberrypi-touchscreen: Avoid NULL deref if not initialised
Dave Stevenson [Fri, 15 Apr 2022 16:25:12 +0000 (18:25 +0200)]
drm/panel/raspberrypi-touchscreen: Avoid NULL deref if not initialised

If a call to rpi_touchscreen_i2c_write from rpi_touchscreen_probe
fails before mipi_dsi_device_register_full is called, then
in trying to log the error message if uses ts->dsi->dev when
it is still NULL.

Use ts->i2c->dev instead, which is initialised earlier in probe.

Fixes: 2f733d6194bd ("drm/panel: Add support for the Raspberry Pi 7" Touchscreen.")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220415162513.42190-2-stefan.wahren@i2se.com