Florian Westphal [Tue, 25 Aug 2020 22:52:43 +0000 (00:52 +0200)]
netfilter: conntrack: remove ignore stats
This counter increments when nf_conntrack_in sees a packet that already
has a conntrack attached or when the packet is marked as UNTRACKED.
Neither is an error.
The former is normal for loopback traffic. The second happens for
certain ICMPv6 packets or when nftables/ip(6)tables rules are in place.
In case someone needs to count UNTRACKED packets, or packets
that are marked as untracked before conntrack_in this can be done with
both nftables and ip(6)tables rules.
Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Florian Westphal [Tue, 25 Aug 2020 22:52:42 +0000 (00:52 +0200)]
netfilter: conntrack: do not increment two error counters at same time
The /proc interface for nf_conntrack displays the "error" counter as
"icmp_error".
It makes sense to not increment "invalid" when failing to handle an icmp
packet since those are special.
For example, its possible for conntrack to see partial and/or fragmented
packets inside icmp errors. This should be a separate event and not get
mixed with the "invalid" counter.
Likewise, remove the "error" increment for errors from get_l4proto().
After this, the error counter will only increment for errors coming from
icmp(v6) packet handling.
Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Michael Zhou [Thu, 6 Aug 2020 15:15:25 +0000 (01:15 +1000)]
netfilter: ip6t_NPT: rewrite addresses in ICMPv6 original packet
Detect and rewrite a prefix embedded in an ICMPv6 original packet that was
rewritten by a corresponding DNPT/SNPT rule so it will be recognised by
the host that sent the original packet.
Example
Rules in effect on the 1:2:3:4::/64 + 5:6:7:8::/64 side router:
* SNPT src-pfx 1:2:3:4::/64 dst-pfx 5:6:7:8::/64
* DNPT src-pfx 5:6:7:8::/64 dst-pfx 1:2:3:4::/64
No rules on the 9:a:b:c::/64 side.
1. 1:2:3:4::1 sends UDP packet to 9:a:b:c::1
2. Router applies SNPT changing src to 5:6:7:8::ffef::1
3. 9:a:b:c::1 receives packet with (src 5:6:7:8::ffef::1 dst 9:a:b:c::1)
and replies with ICMPv6 port unreachable to 5:6:7:8::ffef::1,
including original packet (src 5:6:7:8::ffef::1 dst 9:a:b:c::1)
4. Router forwards ICMPv6 packet with (src 9:a:b:c::1 dst 5:6:7:8::ffef::1)
including original packet (src 5:6:7:8::ffef::1 dst 9:a:b:c::1)
and applies DNPT changing dst to 1:2:3:4::1
5. 1:2:3:4::1 receives ICMPv6 packet with (src 9:a:b:c::1 dst 1:2:3:4::1)
including original packet (src 5:6:7:8::ffef::1 dst 9:a:b:c::1).
It doesn't recognise the original packet as the src doesn't
match anything it originally sent
With this change, at step 4, DNPT will also rewrite the original packet
src to 1:2:3:4::1, so at step 5, 1:2:3:4::1 will recognise the ICMPv6
error and provide feedback to the application properly.
Conversely, SNPT will help when ICMPv6 errors are sent from the
translated network.
1. 9:a:b:c::1 sends UDP packet to 5:6:7:8::ffef::1
2. Router applies DNPT changing dst to 1:2:3:4::1
3. 1:2:3:4::1 receives packet with (src 9:a:b:c::1 dst 1:2:3:4::1)
and replies with ICMPv6 port unreachable to 9:a:b:c::1
including original packet (src 9:a:b:c::1 dst 1:2:3:4::1)
4. Router forwards ICMPv6 packet with (src 1:2:3:4::1 dst 9:a:b:c::1)
including original packet (src 9:a:b:c::1 dst 1:2:3:4::1)
and applies SNPT changing src to 5:6:7:8::ffef::1
5. 9:a:b:c::1 receives ICMPv6 packet with
(src 5:6:7:8::ffef::1 dst 9:a:b:c::1) including
original packet (src 9:a:b:c::1 dst 1:2:3:4::1).
It doesn't recognise the original packet as the dst doesn't
match anything it already sent
The change to SNPT means the ICMPv6 original packet dst will be
rewritten to 5:6:7:8::ffef::1 in step 4, allowing the error to be
properly recognised in step 5.
Signed-off-by: Michael Zhou <mzhou@cse.unsw.edu.au> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Alex Dewar [Fri, 28 Aug 2020 13:55:23 +0000 (14:55 +0100)]
netlabel: remove unused param from audit_log_format()
Commit d3b990b7f327 ("netlabel: fix problems with mapping removal")
added a check to return an error if ret_val != 0, before ret_val is
later used in a log message. Now it will unconditionally print "...
res=1". So just drop the check.
Addresses-Coverity: ("Dead code") Fixes: d3b990b7f327 ("netlabel: fix problems with mapping removal") Signed-off-by: Alex Dewar <alex.dewar90@gmail.com> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 28 Aug 2020 15:01:30 +0000 (08:01 -0700)]
Merge branch 'ionic-memory-usage-rework'
Shannon Nelson says:
====================
ionic memory usage rework
Previous review comments have suggested [1],[2] that this driver
needs to rework how queue resources are managed and reconfigured
so that we don't do a full driver reset and to better handle
potential allocation failures. This patchset is intended to
address those comments.
The first few patches clean some general issues and
simplify some of the memory structures. The last 4 patches
specifically address queue parameter changes without a full
ionic_stop()/ionic_open().
v3: use PTR_ALIGN without typecast
fix up Neel's attribution
v2: use PTR_ALIGN
recovery if netif_set_real_num_tx/rx_queues fails
less racy queue bring up after reconfig
common-ize the reconfig queue stop and start
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Thu, 27 Aug 2020 23:00:29 +0000 (16:00 -0700)]
ionic: change queue count with no reset
Add to our new ionic_reconfigure_queues() to also be able to change
the number of queues in use, and to change the queue interrupt layout
between split and combined.
Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Thu, 27 Aug 2020 23:00:28 +0000 (16:00 -0700)]
ionic: change the descriptor ring length without full reset
The original way of changing ring length was to completely
tear down the lif's queue structure and then rebuild it, while
running the risk of allocations that might fail in the middle
and leave us with a broken driver.
Instead, we can set up all the new queue and descriptor
allocations first, then swap them out and delete the old
allocations. If the new allocations fail, we report the error,
stay with the old setup and continue running. This gives us
a safer path, and a smaller window of time where we're not
processing traffic.
Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Thu, 27 Aug 2020 23:00:27 +0000 (16:00 -0700)]
ionic: change mtu without full queue rebuild
We really don't need to tear down and rebuild the whole queue structure
when changing the MTU; we can simply stop the queues, clean and refill,
then restart the queues.
Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Thu, 27 Aug 2020 23:00:26 +0000 (16:00 -0700)]
ionic: use index not pointer for queue tracking
Use index counters rather than pointers for tracking head
and tail in the queues to save a little memory and to perhaps
slightly faster queue processing.
Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
Split out the queue descriptor blocks into separate dma
allocations to make for smaller blocks.
Co-developed-by: Neel Patel <neel@pensando.io> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Thu, 27 Aug 2020 23:00:23 +0000 (16:00 -0700)]
ionic: rework and simplify handling of the queue stats block
Use a block of stats structs attached to the lif instead of
little ones attached to each qcq. This simplifies our memory
management and gets rid of a lot of unnecessary indirection.
Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Thu, 27 Aug 2020 23:00:22 +0000 (16:00 -0700)]
ionic: remove lif list concept
As we aren't yet supporting multiple lifs, we can remove
complexity by removing the list concept and related code,
to be re-engineered later when actually needed.
Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Thu, 27 Aug 2020 23:00:21 +0000 (16:00 -0700)]
ionic: use kcalloc for new arrays
Use kcalloc for allocating arrays of structures.
Following along after
commit e71642009cbdA ("ionic_lif: Use devm_kcalloc() in ionic_qcq_alloc()")
there are a couple more array allocations that can be converted
to using devm_kcalloc().
Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 28 Aug 2020 13:57:58 +0000 (06:57 -0700)]
Merge branch 'Enable-Fiber-on-DP83822-PHY'
Dan Murphy says:
====================
Enable Fiber on DP83822 PHY
The DP83822 Ethernet PHY has the ability to connect via a Fiber port. The
derivative PHYs DP83825 and DP83826 do not have this ability. In fiber mode
the DP83822 disables auto negotiation and has a fixed 100Mbps speed with
support for full or half duplex modes.
A devicetree binding was added to set the signal polarity for the fiber
connection. This property is only applicable if the FX_EN strap is set in
hardware other wise the signal loss detection is disabled on the PHY.
If the FX_EN is not strapped the device can be configured to run in fiber mode
via the device tree. All be it the PHY will not perform signal loss detection.
v2 review from a long time ago can be found here - https://lore.kernel.org/patchwork/patch/1270958/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Murphy [Thu, 27 Aug 2020 13:45:09 +0000 (08:45 -0500)]
net: phy: DP83822: Add ability to advertise Fiber connection
The DP83822 can be configured to use a Fiber connection. The strap
register is read to determine if the device has been configured to use
a fiber connection. With the fiber connection the PHY can be configured
to detect whether the fiber connection is active by either a high signal
or a low signal.
Fiber mode is only applicable to the DP83822 so rework the PHY match
table so that non-fiber PHYs can still use the same driver but not call
or use any of the fiber features.
Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Murphy [Thu, 27 Aug 2020 13:45:08 +0000 (08:45 -0500)]
dt-bindings: net: dp83822: Add TI dp83822 phy
Add a dt binding for the TI dp83822 ethernet phy device.
Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Mahesh Bandewar [Wed, 26 Aug 2020 16:05:35 +0000 (09:05 -0700)]
net: add option to not create fall-back tunnels in root-ns as well
The sysctl that was added earlier by commit 79134e6ce2c ("net: do
not create fallback tunnels for non-default namespaces") to create
fall-back only in root-ns. This patch enhances that behavior to provide
option not to create fallback tunnels in root-ns as well. Since modules
that create fallback tunnels could be built-in and setting the sysctl
value after booting is pointless, so added a kernel cmdline options to
change this default. The default setting is preseved for backward
compatibility. The kernel command line option of fb_tunnels=initns will
set the sysctl value to 1 and will create fallback tunnels only in initns
while kernel cmdline fb_tunnels=none will set the sysctl value to 2 and
fallback tunnels are skipped in every netns.
Signed-off-by: Mahesh Bandewar <maheshb@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Maciej Zenczykowski <maze@google.com> Cc: Jian Yang <jianyang@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 28 Aug 2020 13:48:44 +0000 (06:48 -0700)]
Merge branch 'Add-phylib-support-to-smsc95xx'
Andre Edich says:
====================
Add phylib support to smsc95xx
To allow to probe external PHY drivers, this patch series adds use of
phylib to the smsc95xx driver.
Changes in v5:
- Removed all phy_read calls from the smsc95xx driver.
Changes in v4:
- Removed useless inline type qualifier.
Changes in v3:
- Moved all MDI-X functionality to the corresponding phy driver;
- Removed field internal_phy from a struct smsc95xx_priv;
- Initialized field is_internal of a struct phy_device;
- Kconfig: Added selection of PHYLIB and SMSC_PHY for USB_NET_SMSC95XX.
Changes in v2:
- Moved 'net' patches from here to the separate patch series;
- Removed redundant call of the phy_start_aneg after phy_start;
- Removed netif_dbg tracing "speed, duplex, lcladv, and rmtadv";
- mdiobus: added dependency from the usbnet device;
- Moved making of the MII address from 'phy_id' and 'idx' into the
function mii_address;
- Moved direct MDIO accesses under condition 'if (pdata->internal_phy)',
as they only need for the internal PHY;
- To be sure, that this set of patches is git-bisectable, tested each
sub-set of patches to be functional for both, internal and external
PHYs, including suspend/resume test for the 'devices'
(5.7.8-1-ARCH, Raspberry Pi 3 Model B).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Andre Edich [Wed, 26 Aug 2020 11:17:17 +0000 (13:17 +0200)]
smsc95xx: add phylib support
Generally, each PHY has their own configuration and it can be done
through an external PHY driver. The smsc95xx driver uses only the
hard-coded internal PHY configuration.
This patch adds phylib support to probe external PHY drivers for
configuring external PHYs.
The MDI-X configuration for the internal PHYs moves from
drivers/net/usb/smsc95xx.c to drivers/net/phy/smsc.c.
Signed-off-by: Andre Edich <andre.edich@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andre Edich [Wed, 26 Aug 2020 11:17:16 +0000 (13:17 +0200)]
smsc95xx: use usbnet->driver_priv
Using `void *driver_priv` instead of `unsigned long data[]` is more
straightforward way to recover the `struct smsc95xx_priv *` from the
`struct net_device *`.
Signed-off-by: Andre Edich <andre.edich@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andre Edich [Wed, 26 Aug 2020 11:17:15 +0000 (13:17 +0200)]
smsc95xx: remove redundant function arguments
This patch removes arguments netdev and phy_id from the functions
smsc95xx_mdio_read_nopm and smsc95xx_mdio_write_nopm. Both removed
arguments are recovered from a new argument `struct usbnet *dev`.
Signed-off-by: Andre Edich <andre.edich@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 28 Aug 2020 13:17:40 +0000 (06:17 -0700)]
Merge tag 'mac80211-next-for-davem-2020-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
This time we have:
* some code to support SAE (WPA3) offload in AP mode
* many documentation (wording) fixes/updates
* netlink policy updates, including the use of NLA_RANGE
with binary attributes
* regulatory improvements for adjacent frequency bands
* and a few other small additions/refactorings/cleanups
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Dichtel [Thu, 27 Aug 2020 12:19:23 +0000 (14:19 +0200)]
gtp: add notification mechanism
Like all other network functions, let's notify gtp context on creation and
deletion.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Tested-by: Gabriel Ganne <gabriel.ganne@6wind.com> Acked-by: Harald Welte <laforge@gnumonks.org> Signed-off-by: David S. Miller <davem@davemloft.net>
please apply the following patch series for qeth to netdev's net-next tree.
Patch 8 makes some improvements to how we handle HW address events,
avoiding some uncertainty around processing stale events after we
switched off the feature.
Except for that it's all straight-forward cleanups.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Thu, 27 Aug 2020 08:17:05 +0000 (10:17 +0200)]
s390/qeth: strictly order bridge address events
The current code for bridge address events has two shortcomings in its
control sequence:
1. after disabling address events via PNSO, we don't flush the remaining
events from the event_wq. So if the feature is re-enabled fast
enough, stale events could leak over.
2. PNSO and the events' arrival via the READ ccw device are unordered.
So even if we flushed the workqueue, it's difficult to say whether
the READ device might produce more events onto the workqueue
afterwards.
Fix this by
1. explicitly fencing off the events when we no longer care, in the
READ device's event handler. This ensures that once we flush the
workqueue, it doesn't get additional address events.
2. Flush the workqueue after disabling the events & fencing them off.
As the code that triggers the flush will typically hold the sbp_lock,
we need to rework the worker code to avoid a deadlock here in case
of a 'notifications-stopped' event. In case of lock contention,
requeue such an event with a delay. We'll eventually aquire the lock,
or spot that the feature has been disabled and the event can thus be
discarded.
This leaves the theoretical race that a stale event could arrive
_after_ we re-enabled ourselves to receive events again. Such an event
would be impossible to distinguish from a 'good' event, nothing we can
do about it.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Thu, 27 Aug 2020 08:17:04 +0000 (10:17 +0200)]
s390/qeth: unify structs for bridge port state
The data returned from IPA_SBP_QUERY_BRIDGE_PORTS and
IPA_SBP_BRIDGE_PORT_STATE_CHANGE has the same format. Use a single
struct definition for it.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Thu, 27 Aug 2020 08:17:03 +0000 (10:17 +0200)]
s390/qeth: copy less data from bridge state events
Current code copies _all_ entries from the event into a worker, when we
later only need specific data from the first entry.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Thu, 27 Aug 2020 08:17:02 +0000 (10:17 +0200)]
s390/qeth: don't let HW override the configured port role
The only time that our Bridgeport role should change is when we change
the configuration ourselves. In which case we also adjust our internal
state tracking, no need to do it again when we receive the corresponding
event.
Removing the locked section helps a subsequent patch that needs to flush
the workqueue while under sbp_lock.
It would be nice to raise a warning here in case HW does weird things
after all, but this could end up generating false-positives when we
change the configuration ourselves.
Suggested-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Thu, 27 Aug 2020 08:17:01 +0000 (10:17 +0200)]
s390/qeth: don't disable address events during initialization
A newly initialized device is disabled for address events, there's no
need to explicitly disable them.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Thu, 27 Aug 2020 08:17:00 +0000 (10:17 +0200)]
s390/qeth: make queue lock a proper spinlock
queue->state is a ternary spinlock in disguise, used by
OSA's TX completion path to lock the Output Queue and flush any pending
packets on it to the device. If the Queue is already locked by our TX
code, setting the lock word to QETH_OUT_Q_LOCKED_FLUSH lets the TX
completion code move on - the TX path will later take care of things
when it unlocks the Queue.
This sort of DIY locking is a non-starter of course, just let the
TX completion path block on the spinlock when necessary. If that ends up
causing additional latency due to lock contention, then converting
the OSA path to use xmit_more is the right way to go forward.
Also slightly expand the locked section and capture all of
qeth_do_send_packet(), so that the update for the 'bufs_pack' statistics
is done race-free.
While reworking the TX completion path's code, remove a barrier() that
doesn't make any sense.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Hoang Huu Le [Thu, 27 Aug 2020 02:56:51 +0000 (09:56 +0700)]
tipc: fix use-after-free in tipc_bcast_get_mode
Syzbot has reported those issues as:
==================================================================
BUG: KASAN: use-after-free in tipc_bcast_get_mode+0x3ab/0x400 net/tipc/bcast.c:759
Read of size 1 at addr ffff88805e6b3571 by task kworker/0:6/3850
CPU: 0 PID: 3850 Comm: kworker/0:6 Not tainted 5.8.0-rc7-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events tipc_net_finalize_work
Fix it by calling flush_scheduled_work() to make sure the
tipc_net_finalize_work() stopped before releasing bcbase object.
Reported-by: syzbot+6ea1f7a8df64596ef4d7@syzkaller.appspotmail.com Reported-by: syzbot+e9cc557752ab126c1b99@syzkaller.appspotmail.com Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Hoang Huu Le <hoang.h.le@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
Move MDIO drivers into their own directory
The phy subdirectory is getting cluttered. It has both PHY drivers and
MDIO drivers, plus a stray switch driver. Soon more PCS drivers are
likely to appear.
Move MDIO and PCS drivers into new directories. This requires fixing
up the xgene driver which uses a relative include path.
v2:
Move the subdirs to drivers/net, rather than drivers/net/phy.
v3:
Add subdirectories under include/linux for mdio and pcs
v4:
there->their
include path fix
No new kconfig prompts
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 27 Aug 2020 02:00:31 +0000 (04:00 +0200)]
net: mdio: Move MDIO drivers into a new subdirectory
Move all the MDIO drivers and multiplexers into drivers/net/mdio. The
mdio core is however left in the phy directory, due to mutual
dependencies between the MDIO core and the PHY core.
Take this opportunity to sort the Kconfig based on the menuconfig
strings, and move the multiplexers to the end with a separating
comment.
v2:
Fix typo in commit message
Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 27 Aug 2020 02:00:30 +0000 (04:00 +0200)]
net: xgene: Move shared header file into include/linux
This header file is currently included into the ethernet driver via a
relative path into the PHY subsystem. This is bad practice, and causes
issues for the upcoming move of the MDIO driver. Move the header file
into include/linux to clean this up.
v2:
Move header to include/linux/mdio
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 27 Aug 2020 02:00:29 +0000 (04:00 +0200)]
net/phy/mdio-i2c: Move header file to include/linux/mdio
In preparation for moving all MDIO drivers into drivers/net/mdio, move
the mdio-i2c header file into include/linux/mdio so it can be used by
both the MDIO driver and the SFP code which instantiates I2C MDIO
busses.
v2:
Add include/linux/mdio
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 27 Aug 2020 02:00:28 +0000 (04:00 +0200)]
net: pcs: Move XPCS into new PCS subdirectory
Create drivers/net/pcs and move the Synopsys DesignWare XPCS into the
new directory. Move the header file into a subdirectory
include/linux/pcs
Start a naming convention of all PCS files use the prefix pcs-, and
rename the XPCS files to fit.
v2:
Add include/linux/pcs
v4:
Fix include path in stmmac.
Remove PCS_DEVICES to avoid new prompts
Cc: Jose Abreu <Jose.Abreu@synopsys.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
James Prestwood [Mon, 13 Apr 2020 16:20:53 +0000 (09:20 -0700)]
nl80211: fix PORT_AUTHORIZED wording to reflect behavior
The CMD_PORT_AUTHORIZED event was described as an event which indicated
a successfully completed 4-way handshake. But the behavior was
not as advertized. The only driver which uses this is brcmfmac, and
this driver only sends the event after a successful 802.1X-FT roam.
This prevents userspace applications from knowing if the 4-way completed
on:
1. Normal 802.1X connects
2. Normal PSK connections
3. FT-PSK roams
wpa_supplicant handles this incorrect behavior by just completing
the connection after association, before the 4-way has completed.
If the 4-way ends up failing it disconnects at that point.
Since this behavior appears to be expected (wpa_s handles it this
way) I have changed the wording in the API description to reflect the
actual behavior.
Markus Theil [Mon, 3 Aug 2020 14:43:53 +0000 (16:43 +0200)]
cfg80211: add helper fn for adjacent rule channels
Some usable channels are located in the union of adjacent
regulatory rules, for example channel 144 in Germany.
Enable them, by also checking if a channel spans two adjacent
regulatory rules/frequency ranges.
All flags involved are disabling things, therefore we can build
the maximum by or-ing them together. Furthermore, take the maximum
of DFS CAC time values and the minimum of allowed power of both
adjacent channels in order to comply with both regulatory rules at
the same time.
Johannes Berg [Wed, 19 Aug 2020 06:56:43 +0000 (08:56 +0200)]
nl80211: use NLA_POLICY_RANGE(NLA_BINARY, ...) for a few attributes
We have a few attributes with minimum and maximum lengths that are
not the same, use the new feature of being able to specify both in
the policy to validate them, removing code and allowing this to be
advertised to userspace in the policy export.
Johannes Berg [Wed, 5 Aug 2020 13:47:16 +0000 (15:47 +0200)]
nl80211: clean up code/policy a bit
Use the policy to validate minimum and exact lengths in
some attributes that weren't previously covered in the
right ways, and remove associated validation code.
Randy Dunlap [Sat, 22 Aug 2020 23:19:53 +0000 (16:19 -0700)]
net: wireless: wext_compat.c: delete duplicated word
Drop the repeated word "be".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Link: https://lore.kernel.org/r/20200822231953.465-8-rdunlap@infradead.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Randy Dunlap [Sat, 22 Aug 2020 23:19:52 +0000 (16:19 -0700)]
net: wireless: sme.c: delete duplicated word
Drop the repeated word "is".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Link: https://lore.kernel.org/r/20200822231953.465-7-rdunlap@infradead.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Randy Dunlap [Sat, 22 Aug 2020 23:19:51 +0000 (16:19 -0700)]
net: wireless: scan.c: delete or fix duplicated words
Drop repeated word "stored".
Change "is is" to "it is".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Link: https://lore.kernel.org/r/20200822231953.465-6-rdunlap@infradead.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Randy Dunlap [Sat, 22 Aug 2020 23:19:50 +0000 (16:19 -0700)]
net: wireless: reg.c: delete duplicated words + fix punctuation
Drop duplicated words "was" and "does".
Fix "let's" apostrophe.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Link: https://lore.kernel.org/r/20200822231953.465-5-rdunlap@infradead.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Randy Dunlap [Sat, 22 Aug 2020 23:19:49 +0000 (16:19 -0700)]
net: wireless: delete duplicated word + fix grammar
Drop the repeated word "Return" + fix verb.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Link: https://lore.kernel.org/r/20200822231953.465-4-rdunlap@infradead.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Randy Dunlap [Sat, 22 Aug 2020 23:19:48 +0000 (16:19 -0700)]
net: mac80211: mesh.h: delete duplicated word
Drop the repeated word "address".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Link: https://lore.kernel.org/r/20200822231953.465-3-rdunlap@infradead.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Randy Dunlap [Sat, 22 Aug 2020 23:19:47 +0000 (16:19 -0700)]
net: mac80211: agg-rx.c: fix duplicated words
Change "If if" to "If it".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Link: https://lore.kernel.org/r/20200822231953.465-2-rdunlap@infradead.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This series constifies a number of static ops variables, to allow the
compiler to put them in read-only memory. Compile-tested only.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Rikard Falkeborn [Wed, 26 Aug 2020 22:56:08 +0000 (00:56 +0200)]
net: ath11k: constify ath11k_thermal_ops
The only usage of ath11k_thermal_ops is to pass its address to
thermal_cooling_device_register() which takes a const pointer. Make it
const to allow the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The only usage of vsc8584_macsec_ops is to assign its address to the
macsec_ops field in the phydev struct, which is a const pointer. Make it
const to allow the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Rikard Falkeborn [Wed, 26 Aug 2020 22:56:06 +0000 (00:56 +0200)]
net: phy: at803x: constify static regulator_ops
The only usage of vddio_regulator_ops and vddh_regulator_ops is to
assign their address to the ops field in the regulator_desc struct,
which is a const pointer. Make them const to allow the compiler to
put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Rikard Falkeborn [Wed, 26 Aug 2020 22:56:05 +0000 (00:56 +0200)]
net: renesas: sh_eth: constify bb_ops
The only usage of bb_ops is to assign its address to the ops field in
the mdiobb_ctrl struct, which is a const pointer. Make it const to allow
the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Rikard Falkeborn [Wed, 26 Aug 2020 22:56:04 +0000 (00:56 +0200)]
net: ethernet: ravb: constify bb_ops
The only usage of bb_ops is to assign its address to the ops field in
the mdiobb_ctrl struct, which is a const pointer. Make it const to allow
the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Rikard Falkeborn [Wed, 26 Aug 2020 22:56:03 +0000 (00:56 +0200)]
net: ethernet: qualcomm: constify qca_serdev_ops
The only usage of qca_serdev_ops is to pass its address to
serdev_device_set_client_ops() which takes a const pointer. Make it
const to allow the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 26 Aug 2020 23:11:39 +0000 (16:11 -0700)]
Merge branch 'refactoring-of-ibmvnic-code'
Lijun Pan says:
====================
refactoring of ibmvnic code
This patch series refactor reset_init and init functions,
and make some other cosmetic changes to make the code
easier to read and debug. v2 removes __func__ and v1's 1/5.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Lijun Pan [Wed, 19 Aug 2020 22:52:26 +0000 (17:52 -0500)]
ibmvnic: merge ibmvnic_reset_init and ibmvnic_init
These two functions share the majority of the code, hence merge
them together. In the meanwhile, add a reset pass-in parameter
to differentiate them. Thus, the code is easier to read and to tell
the difference between reset_init and regular init.
Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Lijun Pan [Wed, 19 Aug 2020 22:52:24 +0000 (17:52 -0500)]
ibmvnic: improve ibmvnic_init and ibmvnic_reset_init
When H_SEND_CRQ command returns with H_CLOSED, it means the
server's CRQ is not ready yet. Instead of resetting immediately,
we wait for the server to launch passive init.
ibmvnic_init() and ibmvnic_reset_init() should also return the
error code from ibmvnic_send_crq_init() call.
Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 26 Aug 2020 23:00:51 +0000 (16:00 -0700)]
Merge branch 'ipv4-nexthop-Various-improvements'
Ido Schimmel says:
====================
ipv4: nexthop: Various improvements
This patch set contains various improvements that I made to the nexthop
object code while studying it towards my upcoming changes.
While patches #4 and #6 fix bugs, they are not regressions (never
worked). They also do not occur to me as critical issues, which is why I
am targeting them at net-next.
Ido Schimmel [Wed, 26 Aug 2020 16:48:57 +0000 (19:48 +0300)]
selftests: fib_nexthops: Test IPv6 route with group after replacing IPv4 nexthops
Test that an IPv6 route can not use a nexthop group with mixed IPv4 and
IPv6 nexthops, but can use it after replacing the IPv4 nexthops with
IPv6 nexthops.
Output without previous patch:
# ./fib_nexthops.sh -t ipv6_fcnal_runtime
IPv6 functional runtime
-----------------------
TEST: Route add [ OK ]
TEST: Route delete [ OK ]
TEST: Ping with nexthop [ OK ]
TEST: Ping - multipath [ OK ]
TEST: Ping - blackhole [ OK ]
TEST: Ping - blackhole replaced with gateway [ OK ]
TEST: Ping - gateway replaced by blackhole [ OK ]
TEST: Ping - group with blackhole [ OK ]
TEST: Ping - group blackhole replaced with gateways [ OK ]
TEST: IPv6 route with device only nexthop [ OK ]
TEST: IPv6 multipath route with nexthop mix - dev only + gw [ OK ]
TEST: IPv6 route can not have a v4 gateway [ OK ]
TEST: Nexthop replace - v6 route, v4 nexthop [ OK ]
TEST: Nexthop replace of group entry - v6 route, v4 nexthop [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways [ OK ]
TEST: IPv6 route using a group after removing v4 gateways [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways [ OK ]
TEST: IPv6 route using a group after replacing v4 gateways [FAIL]
TEST: Nexthop with default route and rpfilter [ OK ]
TEST: Nexthop with multipath default route and rpfilter [ OK ]
Tests passed: 21
Tests failed: 1
Output with previous patch:
# ./fib_nexthops.sh -t ipv6_fcnal_runtime
IPv6 functional runtime
-----------------------
TEST: Route add [ OK ]
TEST: Route delete [ OK ]
TEST: Ping with nexthop [ OK ]
TEST: Ping - multipath [ OK ]
TEST: Ping - blackhole [ OK ]
TEST: Ping - blackhole replaced with gateway [ OK ]
TEST: Ping - gateway replaced by blackhole [ OK ]
TEST: Ping - group with blackhole [ OK ]
TEST: Ping - group blackhole replaced with gateways [ OK ]
TEST: IPv6 route with device only nexthop [ OK ]
TEST: IPv6 multipath route with nexthop mix - dev only + gw [ OK ]
TEST: IPv6 route can not have a v4 gateway [ OK ]
TEST: Nexthop replace - v6 route, v4 nexthop [ OK ]
TEST: Nexthop replace of group entry - v6 route, v4 nexthop [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways [ OK ]
TEST: IPv6 route using a group after removing v4 gateways [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways [ OK ]
TEST: IPv6 route using a group after replacing v4 gateways [ OK ]
TEST: Nexthop with default route and rpfilter [ OK ]
TEST: Nexthop with multipath default route and rpfilter [ OK ]
Tests passed: 22
Tests failed: 0
Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 26 Aug 2020 16:48:56 +0000 (19:48 +0300)]
ipv4: nexthop: Correctly update nexthop group when replacing a nexthop
Each nexthop group contains an indication if it has IPv4 nexthops
('has_v4'). Its purpose is to prevent IPv6 routes from using groups with
IPv4 nexthops.
However, the indication is not updated when a nexthop is replaced. This
results in the kernel wrongly rejecting IPv6 routes from pointing to
groups that only contain IPv6 nexthops. Example:
# ip nexthop replace id 1 via 192.0.2.2 dev dummy10
# ip nexthop replace id 10 group 1
# ip nexthop replace id 1 via 2001:db8:1::2 dev dummy10
# ip route replace 2001:db8:10::/64 nhid 10
Error: IPv6 routes can not use an IPv4 nexthop.
Solve this by iterating over all the nexthop groups that the replaced
nexthop is a member of and potentially update their IPv4 indication
according to the new set of member nexthops.
Avoid wasting cycles by only performing the update in case an IPv4
nexthop is replaced by an IPv6 nexthop.
Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 26 Aug 2020 16:48:55 +0000 (19:48 +0300)]
selftests: fib_nexthops: Test IPv6 route with group after removing IPv4 nexthops
Test that an IPv6 route can not use a nexthop group with mixed IPv4 and
IPv6 nexthops, but can use it after deleting the IPv4 nexthops.
Output without previous patch:
# ./fib_nexthops.sh -t ipv6_fcnal_runtime
IPv6 functional runtime
-----------------------
TEST: Route add [ OK ]
TEST: Route delete [ OK ]
TEST: Ping with nexthop [ OK ]
TEST: Ping - multipath [ OK ]
TEST: Ping - blackhole [ OK ]
TEST: Ping - blackhole replaced with gateway [ OK ]
TEST: Ping - gateway replaced by blackhole [ OK ]
TEST: Ping - group with blackhole [ OK ]
TEST: Ping - group blackhole replaced with gateways [ OK ]
TEST: IPv6 route with device only nexthop [ OK ]
TEST: IPv6 multipath route with nexthop mix - dev only + gw [ OK ]
TEST: IPv6 route can not have a v4 gateway [ OK ]
TEST: Nexthop replace - v6 route, v4 nexthop [ OK ]
TEST: Nexthop replace of group entry - v6 route, v4 nexthop [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways [ OK ]
TEST: IPv6 route using a group after deleting v4 gateways [FAIL]
TEST: Nexthop with default route and rpfilter [ OK ]
TEST: Nexthop with multipath default route and rpfilter [ OK ]
Tests passed: 18
Tests failed: 1
Output with previous patch:
bash-5.0# ./fib_nexthops.sh -t ipv6_fcnal_runtime
IPv6 functional runtime
-----------------------
TEST: Route add [ OK ]
TEST: Route delete [ OK ]
TEST: Ping with nexthop [ OK ]
TEST: Ping - multipath [ OK ]
TEST: Ping - blackhole [ OK ]
TEST: Ping - blackhole replaced with gateway [ OK ]
TEST: Ping - gateway replaced by blackhole [ OK ]
TEST: Ping - group with blackhole [ OK ]
TEST: Ping - group blackhole replaced with gateways [ OK ]
TEST: IPv6 route with device only nexthop [ OK ]
TEST: IPv6 multipath route with nexthop mix - dev only + gw [ OK ]
TEST: IPv6 route can not have a v4 gateway [ OK ]
TEST: Nexthop replace - v6 route, v4 nexthop [ OK ]
TEST: Nexthop replace of group entry - v6 route, v4 nexthop [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways [ OK ]
TEST: IPv6 route using a group after deleting v4 gateways [ OK ]
TEST: Nexthop with default route and rpfilter [ OK ]
TEST: Nexthop with multipath default route and rpfilter [ OK ]
Tests passed: 19
Tests failed: 0
Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 26 Aug 2020 16:48:54 +0000 (19:48 +0300)]
ipv4: nexthop: Correctly update nexthop group when removing a nexthop
Each nexthop group contains an indication if it has IPv4 nexthops
('has_v4'). Its purpose is to prevent IPv6 routes from using groups with
IPv4 nexthops.
However, the indication is not updated when a nexthop is removed. This
results in the kernel wrongly rejecting IPv6 routes from pointing to
groups that only contain IPv6 nexthops. Example:
# ip nexthop replace id 1 via 192.0.2.2 dev dummy10
# ip nexthop replace id 2 via 2001:db8:1::2 dev dummy10
# ip nexthop replace id 10 group 1/2
# ip nexthop del id 1
# ip route replace 2001:db8:10::/64 nhid 10
Error: IPv6 routes can not use an IPv4 nexthop.
Solve this by updating the indication according to the new set of
member nexthops.
Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 26 Aug 2020 16:48:52 +0000 (19:48 +0300)]
ipv4: nexthop: Use nla_put_be32() for NHA_GATEWAY
The code correctly uses nla_get_be32() to get the payload of the
attribute, but incorrectly uses nla_put_u32() to add the attribute to
the payload. This results in the following warning:
net/ipv4/nexthop.c:279:59: warning: incorrect type in argument 3 (different base types)
net/ipv4/nexthop.c:279:59: expected unsigned int [usertype] value
net/ipv4/nexthop.c:279:59: got restricted __be32 [usertype] ipv4
Suppress the warning by using nla_put_be32().
Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 26 Aug 2020 22:55:54 +0000 (15:55 -0700)]
Merge branch 'net_prefetch-API'
Tariq Toukan says:
====================
net_prefetch API
This patchset adds a common net API for L1 cacheline size-aware prefetch.
Patch 1 introduces the common API in net and aligns the drivers to use it.
Patches 2 and 3 add usage in mlx4 and mlx5 Eth drivers.
Series generated against net-next commit: 079f921e9f4d Merge tag 'batadv-next-for-davem-20200824' of git://git.open-mesh.org/linux-merge
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Tariq Toukan [Wed, 26 Aug 2020 12:54:18 +0000 (15:54 +0300)]
net/mlx4_en: RX, Add a prefetch command for small L1_CACHE_BYTES
A single cacheline might not contain the packet header for
small L1_CACHE_BYTES values.
Use net_prefetch() as it issues an additional prefetch
in this case.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tariq Toukan [Wed, 26 Aug 2020 12:54:17 +0000 (15:54 +0300)]
net/mlx5e: RX, Add a prefetch command for small L1_CACHE_BYTES
A single cacheline might not contain the packet header for
small L1_CACHE_BYTES values.
Use net_prefetch() as it issues an additional prefetch
in this case.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tariq Toukan [Wed, 26 Aug 2020 12:54:16 +0000 (15:54 +0300)]
net: Take common prefetch code structure into a function
Many device drivers use the same prefetch code structure to
deal with small L1 cacheline size.
Take this code into a function and call it from the drivers.
Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
Add Ethernet support for Intel Keem Bay SoC
This patch set enables support for Ethernet on the Intel Keem Bay SoC.
The first patch contains the required Device Tree bindings documentation,
while the second patch adds the Intel platform glue layer for the stmmac
device driver.
This driver was tested on the Keem Bay evaluation module board.
Changes since v2:
-Add a select in DT documentation to avoid matching with all nodes containing 'snps,dwmac'
-Rebased to 5.9-rc1
Changes since v1:
-Removed clocks maxItems property from DT bindings documentation
-Removed phy compatible strings from DT bindings documentation
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add dwmac-intel-plat to enable the stmmac driver in Intel Keem Bay.
Also add fix_mac_speed and tx_clk in order to change link speeds.
This is required as mac_speed_o is not connected in the
Intel Keem Bay SoC.
Signed-off-by: Rusaimi Amira Ruslan <rusaimi.amira.rusaimi@intel.com> Signed-off-by: Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / mirror_ubuntu-jammy-kernel.git / log