target-i386: present virtual L3 cache info for vcpus
Some software algorithms are based on the hardware's cache info, for example,
for x86 linux kernel, when cpu1 want to wakeup a task on cpu2, cpu1 will trigger
a resched IPI and told cpu2 to do the wakeup if they don't share low level
cache. Oppositely, cpu1 will access cpu2's runqueue directly if they share llc.
The relevant linux-kernel code as bellow:
In real hardware, the cpus on the same socket share L3 cache, so one won't
trigger a resched IPIs when wakeup a task on others. But QEMU doesn't present a
virtual L3 cache info for VM, then the linux guest will trigger lots of RES IPIs
under some workloads even if the virtual cpus belongs to the same virtual socket.
For KVM, there will be lots of vmexit due to guest send IPIs.
The workload is a SAP HANA's testsuite, we run it one round(about 40 minuates)
and observe the (Suse11sp3)Guest's amounts of RES IPIs which triggering during
the period:
No-L3 With-L3(applied this patch)
cpu0: 363890 44582
cpu1: 373405 43109
cpu2: 340783 43797
cpu3: 333854 43409
cpu4: 327170 40038
cpu5: 325491 39922
cpu6: 319129 42391
cpu7: 306480 41035
cpu8: 161139 32188
cpu9: 164649 31024
cpu10: 149823 30398
cpu11: 149823 32455
cpu12: 164830 35143
cpu13: 172269 35805
cpu14: 179979 33898
cpu15: 194505 32754
avg: 268963.6 40129.8
The VM's topology is "1*socket 8*cores 2*threads".
After present virtual L3 cache info for VM, the amounts of RES IPIs in guest
reduce 85%.
For KVM, vcpus send IPIs will cause vmexit which is expensive, so it can cause
severe performance degradation. We had tested the overall system performance if
vcpus actually run on sparate physical socket. With L3 cache, the performance
improves 7.2%~33.1%(avg:15.7%).
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PIO MR registration should use size from the correct notify struct.
Doesn't affect any visible behaviour because the field values are the
same (both are 4).
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Thomas Huth [Mon, 27 Jun 2016 22:12:03 +0000 (00:12 +0200)]
virtio: Tell the user what went wrong when event_notifier_init failed
event_notifier_init() can fail in real life, for example when there
are not enough open file handles available (EMFILE) when using a lot
of devices. So instead of leaving the average user with a cryptic
error number only, print out a proper error message with strerror()
instead, so that the user has a better way to figure out what is
going on and that using "ulimit -n" might help here for example.
Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Peter Maydell [Fri, 9 Sep 2016 11:49:41 +0000 (12:49 +0100)]
Merge remote-tracking branch 'remotes/famz/tags/docker-pull-request' into staging
# gpg: Signature made Fri 09 Sep 2016 05:54:35 BST
# gpg: using RSA key 0xCA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6
* remotes/famz/tags/docker-pull-request:
docker: silence debootstrap when --quiet is given
docker: build debootstrap after cloning
docker: make sure debootstrap is at least 1.0.67
docker: print warning if EXECUTABLE is not set when building debootstrap image
docker: debian-bootstrap.pre: print helpful message if DEB_ARCH/DEB_TYPE unset
docker: debian-bootstrap.pre: print error messages to stderr
docker: avoid dependency on 'realpath' package
docker.py: don't hang on large docker output
docker: Add a glib2-2.22 image
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 5 Aug 2016 10:43:20 +0000 (11:43 +0100)]
qtest.c: Allow zero size in memset qtest commands
Some tests use the qtest protocol "memset" command with a zero
size, expecting it to do nothing. However in the current code this
will result in calling memset() with a NULL pointer, which is
undefined behaviour. Detect and specially handle zero sizes to
avoid this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1470393800-7882-1-git-send-email-peter.maydell@linaro.org
Peter Maydell [Thu, 8 Sep 2016 14:22:50 +0000 (15:22 +0100)]
Merge remote-tracking branch 'remotes/elmarco/tags/leak-pull-request' into staging
Pull request
v2:
- dropped "tests: fix small leak in test-io-channel-command" that Daniel Berrange will pick
- fixed "tests: add qtest_add_data_func_full" to work with glib < 2.26
# gpg: Signature made Thu 08 Sep 2016 15:16:54 BST
# gpg: using RSA key 0xDAE8E10975969CE5
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>"
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
Allows one to specify a destroy function for the test data.
Add a fallback using glib g_test_add_vtable() internal function, whose
signature changed over time. Tested with glib 2.22, 2.26 and 2.48, which
according to git log should be enough to cover all variations.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
machine_class_base_init() member name is allocated by
machine_class_base_init(), but not freed by
machine_class_finalize(). Simply freeing there doesn't work,
because DEFINE_PC_MACHINE() overwrites it with a literal string.
Fix DEFINE_PC_MACHINE() not to overwrite it, and add the missing
free to machine_class_finalize().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
The isa_register_portio_list() function allocates ioports
data/state. Let's keep the reference to this data on some owner. This
isn't enough to fix leaks, but at least, ASAN stops complaining of
direct leaks. Further cleanup would require calling
portio_list_del/destroy().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
If we silence docker when --quiet is given, we should also silence the
.pre script (i.e. debootstrap).
Only discards stdout, so some diagnostics (e.g. from git clone) are
still printed. Most of the verbose output is gone however and this way
we still have a chance to see error messages.
When using the git version of debootstrap (because no usable version
of debootstrap was installed on the host), we need to run 'make' so
that devices.tar.gz gets built. Otherwise the first debootstrap stage
will fail without printing any error message.
debootstrap prior to 1.0.67 generated an empty sources.list during
foreign bootstraps (Debian#732255 [1]). Fall back to the git checkout
if the installed debootstrap version is too old.
docker: print warning if EXECUTABLE is not set when building debootstrap image
Building the debian-debootstrap image will usually fail if EXECUTABLE
isn't set (when using the Makefile). Warn the user in this case so
they know why it's failing.
docker: debian-bootstrap.pre: print helpful message if DEB_ARCH/DEB_TYPE unset
The debian-bootstrap image doesn't choose a default architecture and
distribution version, instead the user has to set both DEB_ARCH and
DEB_TYPE in the environment. Print a reasonably helpful message if
either of them isn't set instead of complaining about "qemu-" being
missing or erroring out because we cannot cd to the mirror URL.
Unlike Popen.communicate(), subprocess.call() doesn't read from the
stdout file descriptor. If the child process produces more output than
fits into the pipe buffer, it will block indefinitely.
If we don't intend to consume the output, just send it straight to
/dev/null to avoid this issue.
Peter Maydell [Thu, 8 Sep 2016 10:28:11 +0000 (11:28 +0100)]
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.8-20160907' into staging
ppc patch queue for 2016-Sep-7
This is my first pull request for the newly opened qemu-2.8 tree. It
contains a heap of things that were too late for 2.7 and have been
queued for a while. In particular:
* A number of preliminary patches for the powernv machine type
* A substantial cleanup of exception handling which will be
necessary to support running a TCG with hypervisor
facilities
* A start on support for POWER9
* Some TCG implementations for new POWER9 instructions
* Some TCG and related cleanups in preparation for POWER9
* Some assorted TCG optimizations
* An implementation of the H_CHANGE_LOGICAL_LAN_MAC hypercall
which allows the MAC address to be changed on the PAPR virtual
NIC.
* Add some extra test cases for several machines (this isn't
strictly in the ppc code, but is most value to ppc)
NOTE: This pull request supersedes ppc-for-2.8-20160906, which had
some problems. Changes:
* Dropped BenH's lmw/stmw speedups, which break for
qemu-system-ppc64 on BE hosts
* A small fix to Thomas' serial output test to avoid a warning on
the isapc machine type.
* Some trivial checkpatch fixes
Note that some of the patches in this series still have large numbers
of checkpatch warnings. This is because they're moving existing code
that predates most of the checkpatch style conventions.
* remotes/dgibson/tags/ppc-for-2.8-20160907: (64 commits)
tests: Check serial output of firmware boot of some machines
tests: Resort check-qtest entries in Makefile.include
spapr: implement H_CHANGE_LOGICAL_LAN_MAC h_call
ppc: Improve a few more helper flags
ppc: Improve the exception helpers flags
ppc: Improve flags for helpers loading/writing the time facilities
ppc: Don't generate dead code on unconditional branches
ppc: Stop dumping state on all exceptions in linux-user
ppc: Fix catching some segfaults in user mode
ppc: Fix macio ESCC legacy mapping
hw/ppc: add a ppc_create_page_sizes_prop() helper routine
hw/ppc: use error_report instead of fprintf
ppc: Rename #include'd .c files to .inc.c
target-ppc: add extswsli[.] instruction
target-ppc: add vsrv instruction
target-ppc: add vslv instruction
target-ppc: add vcmpnez[b,h,w][.] instructions
target-ppc: add vabsdu[b,h,w] instructions
target-ppc: add dtstsfi[q] instructions
target-ppc: implement branch-less divd[o][.]
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 5 Aug 2016 10:03:12 +0000 (11:03 +0100)]
tests/hd-geo-test: Don't pass NULL to unlink()
The unlink() function doesn't accept a NULL pointer, so
don't pass it one. Spotted by the clang sanitizer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1470391392-28274-1-git-send-email-peter.maydell@linaro.org
Thomas Huth [Sat, 3 Sep 2016 09:57:51 +0000 (11:57 +0200)]
tests: Check serial output of firmware boot of some machines
Some of the machines that we have got a firmware image for write
some output to the serial console while booting up. We can use
this output to make sure that the machine is basically working,
so this adds a test that checks the output of these machines
for some well-known "magic" strings.
Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Thomas Huth [Sat, 3 Sep 2016 09:57:50 +0000 (11:57 +0200)]
tests: Resort check-qtest entries in Makefile.include
The rather random list of check-qtest-xxx entries caused some
confusion in the past, where to use "=" and where to use "+="
(see commits 0ccac16f59462b8e2b9afbc1 and 1f5c1cfbaec0792cd2e5da
for example).
Sorting the check-qtest-xxx entries by architecure instead and
using some empty lines inbetween should help to ease this
situation a little bit, so that it is hopefully now obvious
that new tests should be added with "+=" instead of "=".
While we are at it, this patch also comments out two of the
"gcov-files-..." lines since the corresponding m48t59-test is
disabled for sparc and sparc64, too.
Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mostly turn "store" type of helpers into TCG_CALL_NO_WG because
they can take exceptions. Also fixup_thrm doesn't read nor write
the tracked environment.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
They generate exceptions, but they don't update the environment
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ppc: Improve flags for helpers loading/writing the time facilities
Those helpers never load from or store to the TCG tracked environment,
not do they generate synchronous exceptions (they might generate an
asynchronous interrupt but that's not an issue here).
So we can make them all use TCG_CALL_NO_RWG
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ppc: Don't generate dead code on unconditional branches
We are always generating the "else" case of the condition even when
generating an unconditional branch that will never hit it.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ppc: Stop dumping state on all exceptions in linux-user
Other archs don't do it, some programs catch signals just fine
and those dumps just clutter the output. Keep the dumps for cases
that aren't supposed to happen such as unknown codes.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The usermode "translate" code generates an error code value that
has the "is_write" bit set, which causes our switch/case to miss
and display "Invalid segfault errno" and a spurrious second state
dump. Fix it.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The current mapping, while correct for the base ports (which is all the
driver uses these days), is wrong for the extended registers.
I suspect the bugs come from incorrect tables in the CHRP IO Ref document,
I have verified the new values here match Apple's MacTech.pdf.
Note: Nothing that I know of actually uses these registers so it's not a
huge deal, but this patch has the added advantage of adding comments to
document what the registers are.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
extswsli : Extend Sign Word & Shift Left Immediate
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Vivek Andrew Sha <vivekandrewsha@gmail.com>
[ reverse the order of computation to avoid temporary array ] Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Vivek Andrew Sha <vivekandrewsha@gmail.com> Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
vcmpnezb[.]: Vector Compare Not Equal or Zero Byte
vcmpnezh[.]: Vector Compare Not Equal or Zero Halfword
vcmpnezw[.]: Vector Compare Not Equal or Zero Word
Signed-off-by: Swapnil Bokade <bokadeswapnil@gmail.com>
[ collapse switch case ] Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Sandipan Das <sandipandas1990@gmail.com>
[ use ISA300 define. Drop etype ] Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Sandipan Das [Thu, 28 Jul 2016 18:14:13 +0000 (23:44 +0530)]
target-ppc: add dtstsfi[q] instructions
DFP Test Significance Immediate [Quad]
Signed-off-by: Sandipan Das <sandipandas1990@gmail.com> Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
While implementing modulo instructions figured out that the
implementation uses many branches. Change the logic to achieve the
branch-less code. Undefined value is set to dividend in case of invalid
input.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The current alignment exception generation tries to load the opcode
to put in DSISR from a context where a cpu_ldl_code() is really not
a good idea. It might fault and longjmp out and that's not something
we want happening here.
Instead, pass the releavant opcode bits via the error_code.
There are a couple of cases of alignment interrupts that won't set
anything, the ones coming from access to direct store segments, but
that doesn't happen in practice, nobody used direct store segments
and they are gone from newer chips.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ppc: Don't update NIP in facility unavailable interrupts
This is no longer necessary as the helpers will properly retrieve
the return address when needed. Also remove gen_update_current_nip()
which didn't seem to make much sense to me.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Instead, pass GETPC() result to the corresponding helpers. This
requires a bit of fiddling to get the PC (hopefully) right in
the case where we generate a program check, though the hacks there
are temporary, a subsequent patch will clean this all up by always
having the nip already set to the right instruction when taking
the fault.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[dwg: Fix trivial checkpatch warning] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We don't implement imprecise FP exceptions and using store_current
which sets SRR1 to the *previous* instruction never makes sense
for these. So let's be truthful and make them precise, which is
allowed by the architecture.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ppc: Make float_check_status() pass the return address
Instead of relying on NIP having been updated already.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[dwg: Fold in fix to mark function always_inline] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Instead of using the same helpers called from translate.c, let's have
a bunch of functions that take the various argument combinations,
especially the retaddr which will be needed in subsequent patches,
and leave the helpers to be just that, helpers for translate.c
We don't yet convert all users, we'll go through them in subsequent
patches.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
--
v2. Fix raise_exception_ra() to properly pass raddr Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
maddhd: Multiply-Add High Doubleword
maddhdu: Multiply-Add High Doubleword Unsigned
Above two instruction are dual form and differ by 1 bit
(31st bit)
Multiplies two 64-bit registers (RA * RB), adds third register(RC) to
the result(quadword) and returns the higher dword in the target
register(RT).
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Multiplies two 64-bit registers (RA * RB), adds third register(RC) to
the result(quadword) and returns the lower dword in the target
register(RT).
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The CR number is provided in the opcode as - BFA (11:13)
Returns:
-1 if bit 0 of CR field is set
1 if bit 1 of CR field is set
0 otherwise.
Signed-off-by: Vivek Andrew Sha <vivekandrewsha@gmail.com>
[ reworded commit, used 32bit ops as crf is 32bits ] Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Search a byte in the stream of 8bytes provided in the register
Suggested-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add ISA3.0: Count trailing zeros word instruction.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Sandipan Das [Tue, 26 Jul 2016 11:58:32 +0000 (17:28 +0530)]
target-ppc: add cnttzd[.] instruction
Add ISA3.0 Count trailing zeros double word
Signed-off-by: Sandipan Das <sandipandas1990@gmail.com>
[ added ISA300 flag ] Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
modud: Modulo Unsigned Dword
modsd: Modulo Signed Dword
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Reviewed-by: Richard Henderson <rth@twiddle.net Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
projects / mirror_qemu.git / log