Alex Elder [Wed, 16 Nov 2022 22:37:18 +0000 (16:37 -0600)]
net: ipa: avoid a null pointer dereference
Dan Carpenter reported that Smatch found an instance where a pointer
which had previously been assumed could be null (as indicated by a
null check) was later dereferenced without a similar check.
In practice this doesn't lead to a problem because currently the
pointers used are all non-null. Nevertheless this patch addresses
the reported problem.
In addition, I spotted another bug that arose in the same commit.
When the command to initialize a routing table memory region was
added, the number of entries computed for the non-hashed table
was wrong (it ended up being a Boolean rather than the count
intended). This bug is fixed here as well.
Reported-by: Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/kernel-janitors/Y3OOP9dXK6oEydkf@kili Tested-by: Caleb Connolly <caleb.connolly@linaro.com> Fixes: 5cb76899fb47 ("net: ipa: reduce arguments to ipa_table_init_add()") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 18 Nov 2022 11:44:36 +0000 (11:44 +0000)]
Merge tag 'wireless-next-2022-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.2
Second set of patches for v6.2. Only driver patches this time, nothing
really special. Unused platform data support was removed from wl1251
and rtw89 got WoWLAN support.
Major changes:
ath11k
* support configuring channel dwell time during scan
David S. Miller [Fri, 18 Nov 2022 11:42:54 +0000 (11:42 +0000)]
Merge branch 'sctp-vrf'
Xin Long says:
====================
sctp: support vrf processing
This patchset adds the VRF processing in SCTP. Simliar to TCP/UDP,
it includes socket bind and socket/association lookup changes.
For socket bind change, it allows sockets to bind to a VRF device
and allows multiple sockets with the same IP and PORT to bind to
different interfaces in patch 1-3.
For socket/association lookup change, it adds dif and sdif check
in both asoc and ep lookup in patch 4 and 5, and when binding to
nodev, users can decide if accept the packets received from one
l3mdev by setup a sysctl option in patch 6.
Note with VRF support, in a netns, an association will be decided
by src ip + src port + dst ip + dst port + bound_dev_if, and it's
possible for ss to have:
State Local Address:Port Peer Address:Port
ESTAB 192.168.1.2%vrf-s1:1234
`- ESTAB 192.168.1.2%veth1:1234 192.168.1.1:1234
ESTAB 192.168.1.2%vrf-s2:1234
`- ESTAB 192.168.1.2%veth2:1234 192.168.1.1:1234
See the selftest in patch 7 for more usage.
Also, thanks Carlo for testing this patch series on their use.
v1->v2:
- In Patch 5, move sctp_sk_bound_dev_eq() definition to net/sctp/
input.c to avoid a build error when IP_SCTP is disabled, as Paolo
suggested.
- In Patch 7, avoid one sleep by disabling the IPv6 dad, and remove
another sleep by using ss to check if the server's ready, and also
delete two unncessary sleeps in sctp_hello.c, as Paolo suggested.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Wed, 16 Nov 2022 20:01:22 +0000 (15:01 -0500)]
selftests: add a selftest for sctp vrf
This patch adds 12 small test cases: 01-04 test for the sysctl
net.sctp.l3mdev_accept. 05-10 test for only binding to a right
l3mdev device, the connection can be created. 11-12 test for
two socks binding to different l3mdev devices at the same time,
each of them can process the packets from the corresponding
peer. The tests run for both IPv4 and IPv6 SCTP.
Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Wed, 16 Nov 2022 20:01:20 +0000 (15:01 -0500)]
sctp: add dif and sdif check in asoc and ep lookup
This patch at first adds a pernet global l3mdev_accept to decide if it
accepts the packets from a l3mdev when a SCTP socket doesn't bind to
any interface. It's set to 1 to avoid any possible incompatible issue,
and in next patch, a sysctl will be introduced to allow to change it.
Then similar to inet/udp_sk_bound_dev_eq(), sctp_sk_bound_dev_eq() is
added to check either dif or sdif is equal to sk_bound_dev_if, and to
check sid is 0 or l3mdev_accept is 1 if sk_bound_dev_if is not set.
This function is used to match a association or a endpoint, namely
called by sctp_addrs_lookup_transport() and sctp_endpoint_is_match().
All functions that needs updating are:
Xin Long [Wed, 16 Nov 2022 20:01:18 +0000 (15:01 -0500)]
sctp: check sk_bound_dev_if when matching ep in get_port
In sctp_get_port_local(), when binding to IP and PORT, it should
also check sk_bound_dev_if to match listening sk if it's set by
SO_BINDTOIFINDEX, so that multiple sockets with the same IP and
PORT, but different sk_bound_dev_if can be listened at the same
time.
Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Wed, 16 Nov 2022 20:01:17 +0000 (15:01 -0500)]
sctp: check ipv6 addr with sk_bound_dev if set
When binding to an ipv6 address, it calls ipv6_chk_addr() to check if
this address is on any dev. If a socket binds to a l3mdev but no dev
is passed to do this check, all l3mdev and slaves will be skipped and
the check will fail.
This patch is to pass the bound_dev to make sure the devices under the
same l3mdev can be returned in ipv6_chk_addr(). When the bound_dev is
not a l3mdev or l3slave, l3mdev_master_dev_rcu() will return NULL in
__ipv6_chk_addr_and_flags(), it will keep compitable with before when
NULL dev was passed.
Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jiawen Wu [Wed, 16 Nov 2022 01:58:35 +0000 (09:58 +0800)]
net: libwx: Fix dead code for duplicate check
Fix duplicate check on polling timeout.
Fixes: 1efa9bfe58c5 ("net: libwx: Implement interaction with firmware") Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Antoine Tenart [Tue, 15 Nov 2022 15:44:51 +0000 (16:44 +0100)]
net: phy: mscc: macsec: do not copy encryption keys
Following 1b16b3fdf675 ("net: phy: mscc: macsec: clear encryption keys when freeing a flow"),
go one step further and instead of calling memzero_explicit on the key
when freeing a flow, simply not copy the key in the first place as it's
only used when a new flow is set up.
Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, GSI firmware must be loaded for IPA before it can be
used--either by the modem, or by the AP. New hardware supports a
third option, with the bootloader taking responsibility for loading
GSI firmware. In that case, neither the AP nor the modem needs to
do that.
The first patch in this series deprecates the "modem-init" Device
Tree property in the IPA binding, using a new "qcom,gsi-loader"
property instead. The second and third implement logic in the code
to support either the "old" or the "new" way of specifying how GSI
firmware is loaded.
The last two patches implement a new value for the "qcom,gsi-loader"
property. If the value is "skip", neither the AP nor modem needs to
load the GSI firmware. The first of these patches implements the
change in the IPA binding; the second implements it in the code.
====================
Alex Elder [Wed, 16 Nov 2022 07:32:56 +0000 (01:32 -0600)]
net: ipa: permit GSI firmware loading to be skipped
Define a new value "skip" for the "qcom,gsi-loader" Device Tree
property. If used, it indicates that neither the AP nor the modem
need to load GSI firmware (because it has already been loaded--for
example by the boot loader).
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Elder [Wed, 16 Nov 2022 07:32:55 +0000 (01:32 -0600)]
dt-bindings: net: qcom,ipa: support skipping GSI firmware load
Add a new enumerated value to those defined for the qcom,gsi-loader
property. If the qcom,gsi-loader is "skip", the GSI firmware will
already be loaded, so neither the AP nor modem is required to load
GSI firmware.
Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Elder [Wed, 16 Nov 2022 07:32:54 +0000 (01:32 -0600)]
net: ipa: introduce "qcom,gsi-loader" property
Introduce a new way of specifying how the GSI firmware gets loaded
for IPA. Currently, this is indicated by the presence or absence of
the Boolean "modem-init" Device Tree property. The new property
must have a value--either "self" or "modem"--which indicates whether
the AP or modem is the GSI firmware loader, respectively.
For legacy systems, the new property will not exist, and the
"modem-init" property will be used. For newer systems, the
"qcom,gsi-loader" property *must* exist, and must have one of the
two prescribed values. It is an error to have both properties
defined, and it is an error for the new property to have an
unrecognized value.
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Elder [Wed, 16 Nov 2022 07:32:53 +0000 (01:32 -0600)]
net: ipa: encapsulate decision about firmware load
The GSI layer used for IPA requires firmware to be loaded.
Currently either the AP or the modem loads the firmware,
distinguished by whether the "modem-init" Device Tree
property is defined.
Some newer systems implement a third option. In preparation for
that, encapsulate the code that determines how the GSI firmware
gets loaded in a new function, ipa_firmware_loader().
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Elder [Wed, 16 Nov 2022 07:32:52 +0000 (01:32 -0600)]
dt-bindings: net: qcom,ipa: deprecate modem-init
GSI firmware for IPA must be loaded during initialization, either by
the AP or by the modem. The loader is currently specified based on
whether the Boolean modem-init property is present.
Instead, use a new property with an enumerated value to indicate
explicitly how GSI firmware gets loaded. With this in place, a
third approach can be added in an upcoming patch.
The new qcom,gsi-loader property has two defined values:
- self: The AP loads GSI firmware
- modem: The modem loads GSI firmware
The modem-init property must still be supported, but is now marked
deprecated.
Update the example so it represents the SC7180 SoC, and provide
examples for the qcom,gsi-loader, memory-region, and firmware-name
properties.
Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xin Long [Tue, 15 Nov 2022 15:40:21 +0000 (10:40 -0500)]
sctp: move SCTP_PAD4 and SCTP_TRUNC4 to linux/sctp.h
Move these two macros from net/sctp/sctp.h to linux/sctp.h, so that
it will be enough to include only linux/sctp.h in nft_exthdr.c and
xt_sctp.c. It should not include "net/sctp/sctp.h" if a module does
not have a dependence on SCTP module.
Xin Long [Tue, 15 Nov 2022 15:39:53 +0000 (10:39 -0500)]
sctp: change to include linux/sctp.h in net/sctp/checksum.h
Currently "net/sctp/checksum.h" including "net/sctp/sctp.h" is
included in quite some places in netfilter and openswitch and
net/sched. It's not necessary to include "net/sctp/sctp.h" if
a module does not have dependence on SCTP, "linux/sctp.h" is
the right one to include.
====================
Implement devlink-rate API and extend it
This patch series implements devlink-rate for ice driver. Unfortunately
current API isn't flexible enough for our use case, so there is a need to
extend it. Some functions have been introduced to enable the driver to
export current Tx scheduling configuration.
Pasting justification for this series from commit implementing devlink-rate
in ice driver(that is a part of this series):
There is a need to support modification of Tx scheduler tree, in the
ice driver. This will allow user to control Tx settings of each node in
the internal hierarchy of nodes. As a result user will be able to use
Hierarchy QoS implemented entirely in the hardware.
This patch implemenents devlink-rate API. It also exports initial
default hierarchy. It's mostly dictated by the fact that the tree
can't be removed entirely, all we can do is enable the user to modify
it. For example root node shouldn't ever be removed, also nodes that
have children are off-limits.
Example initial tree with 2 VF's:
[root@fedora ~]# devlink port function rate show
pci/0000:4b:00.0/node_27: type node parent node_26
pci/0000:4b:00.0/node_26: type node parent node_0
pci/0000:4b:00.0/node_34: type node parent node_33
pci/0000:4b:00.0/node_33: type node parent node_32
pci/0000:4b:00.0/node_32: type node parent node_16
pci/0000:4b:00.0/node_19: type node parent node_18
pci/0000:4b:00.0/node_18: type node parent node_17
pci/0000:4b:00.0/node_17: type node parent node_16
pci/0000:4b:00.0/node_21: type node parent node_20
pci/0000:4b:00.0/node_20: type node parent node_3
pci/0000:4b:00.0/node_14: type node parent node_5
pci/0000:4b:00.0/node_5: type node parent node_3
pci/0000:4b:00.0/node_13: type node parent node_4
pci/0000:4b:00.0/node_12: type node parent node_4
pci/0000:4b:00.0/node_11: type node parent node_4
pci/0000:4b:00.0/node_10: type node parent node_4
pci/0000:4b:00.0/node_9: type node parent node_4
pci/0000:4b:00.0/node_8: type node parent node_4
pci/0000:4b:00.0/node_7: type node parent node_4
pci/0000:4b:00.0/node_6: type node parent node_4
pci/0000:4b:00.0/node_4: type node parent node_3
pci/0000:4b:00.0/node_3: type node parent node_16
pci/0000:4b:00.0/node_16: type node parent node_15
pci/0000:4b:00.0/node_15: type node parent node_0
pci/0000:4b:00.0/node_2: type node parent node_1
pci/0000:4b:00.0/node_1: type node parent node_0
pci/0000:4b:00.0/node_0: type node
pci/0000:4b:00.0/1: type leaf parent node_27
pci/0000:4b:00.0/2: type leaf parent node_27
So at this point there is a couple things that can be done.
For example we could only assign parameters to VF's.
[root@fedora ~]# devlink port function rate set pci/0000:4b:00.0/1 \
tx_max 5Gbps
This would cap the VF 1 BW to 5Gbps.
But let's say you would like to create a completely new branch.
This can be done like this:
[root@fedora ~]# devlink port function rate add \
pci/0000:4b:00.0/node_custom parent node_0
[root@fedora ~]# devlink port function rate add \
pci/0000:4b:00.0/node_custom_1 parent node_custom
[root@fedora ~]# devlink port function rate set \
pci/0000:4b:00.0/1 parent node_custom_1
This creates a completely new branch and reassigns VF 1 to it.
A number of parameters is supported per each node: tx_max, tx_share,
tx_priority and tx_weight.
====================
ice: Add documentation for devlink-rate implementation
Add documentation to a newly added devlink-rate feature. Provide some
examples on how to use the commands, which netlink attributes are
supported and descriptions of the attributes.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ice: Prevent ADQ, DCB coexistence with Custom Tx scheduler
ADQ, DCB might interfere with Custom Tx Scheduler changes that user
might introduce using devlink-rate API.
Check if ADQ, DCB is active, when user tries to change any setting
in exported Tx scheduler tree. If any of those are active block the user
from doing so, and log an appropriate message.
Remove the exported hierarchy if user enable ADQ or DCB.
Prevent ADQ or DCB from getting configured if user already made some
changes using devlink-rate API.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a need to support modification of Tx scheduler tree, in the
ice driver. This will allow user to control Tx settings of each node in
the internal hierarchy of nodes. As a result user will be able to use
Hierarchy QoS implemented entirely in the hardware.
This patch implemenents devlink-rate API. It also exports initial
default hierarchy. It's mostly dictated by the fact that the tree
can't be removed entirely, all we can do is enable the user to modify
it. For example root node shouldn't ever be removed, also nodes that
have children are off-limits.
Example initial tree with 2 VF's:
[root@fedora ~]# devlink port function rate show
pci/0000:4b:00.0/node_27: type node parent node_26
pci/0000:4b:00.0/node_26: type node parent node_0
pci/0000:4b:00.0/node_34: type node parent node_33
pci/0000:4b:00.0/node_33: type node parent node_32
pci/0000:4b:00.0/node_32: type node parent node_16
pci/0000:4b:00.0/node_19: type node parent node_18
pci/0000:4b:00.0/node_18: type node parent node_17
pci/0000:4b:00.0/node_17: type node parent node_16
pci/0000:4b:00.0/node_21: type node parent node_20
pci/0000:4b:00.0/node_20: type node parent node_3
pci/0000:4b:00.0/node_14: type node parent node_5
pci/0000:4b:00.0/node_5: type node parent node_3
pci/0000:4b:00.0/node_13: type node parent node_4
pci/0000:4b:00.0/node_12: type node parent node_4
pci/0000:4b:00.0/node_11: type node parent node_4
pci/0000:4b:00.0/node_10: type node parent node_4
pci/0000:4b:00.0/node_9: type node parent node_4
pci/0000:4b:00.0/node_8: type node parent node_4
pci/0000:4b:00.0/node_7: type node parent node_4
pci/0000:4b:00.0/node_6: type node parent node_4
pci/0000:4b:00.0/node_4: type node parent node_3
pci/0000:4b:00.0/node_3: type node parent node_16
pci/0000:4b:00.0/node_16: type node parent node_15
pci/0000:4b:00.0/node_15: type node parent node_0
pci/0000:4b:00.0/node_2: type node parent node_1
pci/0000:4b:00.0/node_1: type node parent node_0
pci/0000:4b:00.0/node_0: type node
pci/0000:4b:00.0/1: type leaf parent node_27
pci/0000:4b:00.0/2: type leaf parent node_27
So at this point there is a couple things that can be done.
For example we could only assign parameters to VF's.
[root@fedora ~]# devlink port function rate set pci/0000:4b:00.0/1 \
tx_max 5Gbps
This would cap the VF 1 BW to 5Gbps.
But let's say you would like to create a completely new branch.
This can be done like this:
[root@fedora ~]# devlink port function rate add \
pci/0000:4b:00.0/node_custom parent node_0
[root@fedora ~]# devlink port function rate add \
pci/0000:4b:00.0/node_custom_1 parent node_custom
[root@fedora ~]# devlink port function rate set \
pci/0000:4b:00.0/1 parent node_custom_1
This creates a completely new branch and reassigns VF 1 to it.
A number of parameters is supported per each node: tx_max, tx_share,
tx_priority and tx_weight.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ice: Add an option to pre-allocate memory for ice_sched_node
devlink-rate API requires a priv object to be allocated when node still
doesn't have a parent. This is problematic, because ice_sched_node can't
be currently created without a parent.
Add an option to pre-allocate memory for ice_sched_node struct. Add
new arguments to ice_sched_add() and ice_sched_add_elems() that allow
for pre-allocation of memory for ice_sched_node struct.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To support new devlink-rate API ice_sched_node struct needs to store
a number of additional parameters. This includes tx_max, tx_share,
tx_weight, and tx_priority.
Add new fields to ice_sched_node struct. Add new functions to configure
the hardware with new parameters. Introduce new xarray to identify
nodes uniquely.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
devlink: Allow to set up parent in devl_rate_leaf_create()
Currently the driver is able to create leaf nodes for the devlink-rate,
but is unable to set parent for them. This wasn't as issue before the
possibility to export hierarchy from the driver. After adding the export
feature, in order for the driver to supply correct hierarchy, it's
necessary for it to be able to supply a parent name to
devl_rate_leaf_create().
Introduce a new parameter 'parent_name' in devl_rate_leaf_create().
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
devlink: Allow for devlink-rate nodes parent reassignment
Currently it's not possible to reassign the parent of the node using one
command. As the previous commit introduced a way to export entire
hierarchy from the driver, being able to modify and reassign parents
become important. This way user might easily change QoS settings without
interrupting traffic.
Example command:
devlink port function rate set pci/0000:4b:00.0/1 parent node_custom_1
This reassigns leaf node parent to node_custom_1.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
devlink: Enable creation of the devlink-rate nodes from the driver
Intel 100G card internal firmware hierarchy for Hierarchicial QoS is very
rigid and can't be easily removed. This requires an ability to export
default hierarchy to allow user to modify it. Currently the driver is
only able to create the 'leaf' nodes, which usually represent the vport.
This is not enough for HQoS implemented in Intel hardware.
Introduce new function devl_rate_node_create() that allows for creation
of the devlink-rate nodes from the driver.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
devlink: Introduce new attribute 'tx_weight' to devlink-rate
To fully utilize offload capabilities of Intel 100G card QoS capabilities
new attribute 'tx_weight' needs to be introduced. This attribute allows
for usage of Weighted Fair Queuing arbitration scheme among siblings.
This arbitration scheme can be used simultaneously with the strict
priority.
Introduce new attribute in devlink-rate that will allow for configuration
of Weighted Fair Queueing. New attribute is optional.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
devlink: Introduce new attribute 'tx_priority' to devlink-rate
To fully utilize offload capabilities of Intel 100G card QoS capabilities
new attribute 'tx_priority' needs to be introduced. This attribute allows
for usage of strict priority arbiter among siblings. This arbitration
scheme attempts to schedule nodes based on their priority as long as the
nodes remain within their bandwidth limit.
Introduce new attribute in devlink-rate that will allow for configuration
of strict priority. New attribute is optional.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Autoload DSA tagging driver when dynamically changing protocol
This patch set solves the issue reported by Michael and Heiko here:
https://lore.kernel.org/lkml/20221027113248.420216-1-michael@walle.cc/
making full use of Michael's suggestion of having two modaliases: one
gets used for loading the tagging protocol when it's the default one
reported by the switch driver, the other gets loaded at user's request,
by name.
CONFIG_NET_DSA and everything that depends on it is built as module.
Everything auto-loads, and "cat /sys/class/net/eno2/dsa/tagging" shows
"ocelot-8021q". Traffic works as well. Furthermore, "echo ocelot-8021q"
into the aforementioned sysfs file now auto-loads the driver for it.
====================
Vladimir Oltean [Tue, 15 Nov 2022 01:18:47 +0000 (03:18 +0200)]
net: dsa: autoload tag driver module on tagging protocol change
Issue a request_module() call when an attempt to change the tagging
protocol is made, either by sysfs or by device tree. In the case of
ocelot (the only driver for which the default and the alternative
tagging protocol are compiled as different modules), the user is now no
longer required to insert tag_ocelot_8021q.ko manually.
In the particular case of ocelot, this solves a problem where
tag_ocelot_8021q.ko is built as module, and this is present in the
device tree:
Because no one attempts to load the module into the kernel at boot time,
the switch driver will fail to probe (actually forever defer) until
someone manually inserts tag_ocelot_8021q.ko. This is now no longer
necessary and happens automatically.
Rename dsa_find_tagger_by_name() to denote the change in functionality:
there is now feature parity with dsa_tag_driver_get_by_id(), i.o.w. we
also load the module if it's missing.
Link: https://lore.kernel.org/lkml/20221027113248.420216-1-michael@walle.cc/ Suggested-by: Michael Walle <michael@walle.cc> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Michael Walle <michael@walle.cc> # on kontron-sl28 w/ ocelot_8021q Tested-by: Michael Walle <michael@walle.cc> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 15 Nov 2022 01:18:45 +0000 (03:18 +0200)]
net: dsa: strip sysfs "tagging" string of trailing newline
Currently, dsa_find_tagger_by_name() uses sysfs_streq() which works both
with strings that contain \n at the end (echo ocelot > .../dsa/tagging)
and with strings that don't (printf ocelot > .../dsa/tagging).
There will be a problem once we'll want to construct the modalias string
based on which we auto-load the protocol kernel module. If the sysfs
buffer ends in a newline, we need to strip it first. This is a
preparatory patch specifically for that.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Michael Walle <michael@walle.cc> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 15 Nov 2022 01:18:44 +0000 (03:18 +0200)]
net: dsa: provide a second modalias to tag proto drivers based on their name
Currently, tagging protocol drivers have a modalias of
"dsa_tag:id-<number>", where the number is one of DSA_TAG_PROTO_*_VALUE.
This modalias makes it possible for the request_module() call in
dsa_tag_driver_get() to work, given the input it has - an integer
returned by ds->ops->get_tag_protocol().
It is also possible to change tagging protocols at (pseudo-)runtime, via
sysfs or via device tree, and this works via the name string of the
tagging protocol rather than via its id (DSA_TAG_PROTO_*_VALUE).
In the latter case, there is no request_module() call, because there is
no association that the DSA core has between the string name and the ID,
to construct the modalias. The module is simply assumed to have been
inserted. This is actually slightly problematic when the tagging
protocol change should take place at probe time, since it's expected
that the dependency module should get autoloaded.
For this purpose, let's introduce a second modalias, so that the DSA
core can call request_module() by name. There is no reason to make the
modalias by name optional, so just modify the MODULE_ALIAS_DSA_TAG_DRIVER()
macro to take both the ID and the name as arguments, and generate two
modaliases behind the scenes.
Suggested-by: Michael Walle <michael@walle.cc> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Michael Walle <michael@walle.cc> # on kontron-sl28 w/ ocelot_8021q Tested-by: Michael Walle <michael@walle.cc> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 15 Nov 2022 01:18:43 +0000 (03:18 +0200)]
net: dsa: rename tagging protocol driver modalias
It's autumn cleanup time, and today's target are modaliases.
Michael says that for users of modinfo, "dsa_tag-20" is not the most
suggestive name, and recommends a change to "dsa_tag-id-20".
Andrew points out that other modaliases have a prefix delimited by
colons, so he recommends "dsa_tag:20" instead of "dsa_tag-20".
To satisfy both proposals, Florian recommends "dsa_tag:id-20".
The modaliases are not stable ABI, and the essential information
(protocol ID) is still conveyed in the new string, which
request_module() must be adapted to form.
Link: 20221027210830.3577793-1-vladimir.oltean@nxp.com Suggested-by: Andrew Lunn <andrew@lunn.ch> Suggested-by: Michael Walle <michael@walle.cc> Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Michael Walle <michael@walle.cc> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 15 Nov 2022 01:18:42 +0000 (03:18 +0200)]
net: dsa: stop exposing tag proto module helpers to the world
The DSA tagging protocol driver macros are in the public include/net/dsa.h
probably because that's also where the DSA_TAG_PROTO_*_VALUE macros are
(MODULE_ALIAS_DSA_TAG_DRIVER hinges on those macro definitions).
But there is no reason to expose these helpers to <net/dsa.h>. That
header is shared between switch drivers (drivers/net/dsa/), tagging
protocol drivers (net/dsa/tag_*.c), the DSA core (net/dsa/ sans tag_*.c),
and the rest of the world (DSA master drivers, network stack, etc).
Too much exposure.
On the other hand, net/dsa/dsa_priv.h is included only by the DSA core
and by DSA tagging protocol drivers (or IOW, "friend" modules). Also a
bit too much exposure - I've contemplated creating a new header which is
only included by tagging protocol drivers, but completely separating a
new dsa_tag_proto.h from dsa_priv.h is not immediately trivial - for
example dsa_slave_to_port() is used both from the fast path and from the
control path.
So for now, move these definitions to dsa_priv.h which at least hides
them from the world.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Michael Walle <michael@walle.cc> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IPQ5018, IPQ6018 and IPQ8074 require clock-names to be set as driver is
requesting the clock based on it and not index, so document that and make
it required for the listed SoC-s.
Allow using IPQ8074 specific compatible along with the fallback IPQ4019
one in order to be able to specify which compatibles require clocks to
be able to validate them via schema.
Document IPQ6018 compatible that is already being used in the DTS along
with the fallback IPQ4019 compatible as driver itself only gets probed
on IPQ4019 and IPQ5018 compatibles.
This is also required in order to specify which platform require clock to
be defined and validate it in schema.
====================
net: dsa: use more appropriate NET_NAME_* constants for user ports
The intention of commit 685343fc3ba6 ("net: add name_assign_type
netdev attribute") was clearly that drivers be switched over one by
one to select appropriate NET_NAME_* constants instead of
NET_NAME_UNKNOWN. This small series attempts to do that for DSA user
ports.
This is obviously and intentionally user-visible changes, so there's a
small chance that it could lead to a regression. To make it easy to
revert either of the "label in DT" and "fallback to eth%d" changes,
this is done as a refactoring which shouldn't introduce any functional
change (but by itself adds code which looks a little odd, with the two
identical assignments in the two branches), followed by changing the
constant used in each case in two different patches.
====================
Rasmus Villemoes [Wed, 16 Nov 2022 10:52:04 +0000 (11:52 +0100)]
net: dsa: set name_assign_type to NET_NAME_ENUM for enumerated user ports
When a user port does not have a label in device tree, and we thus
fall back to the eth%d scheme, the proper constant to use is
NET_NAME_ENUM. See also commit e9f656b7a214 ("net: ethernet: set
default assignment identifier to NET_NAME_ENUM"), which in turn quoted
commit 685343fc3ba6 ("net: add name_assign_type netdev attribute"):
... when the kernel has given the interface a name using global
device enumeration based on order of discovery (ethX, wlanY, etc)
... are labelled NET_NAME_ENUM.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.faineli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rasmus Villemoes [Wed, 16 Nov 2022 10:52:03 +0000 (11:52 +0100)]
net: dsa: use NET_NAME_PREDICTABLE for user ports with name given in DT
When a user port has a label in device tree, the corresponding
netdevice is, to quote include/uapi/linux/netdevice.h, "predictably
named by the kernel". This is also explicitly one of the intended use
cases for NET_NAME_PREDICTABLE, quoting 685343fc3ba6 ("net: add
name_assign_type netdev attribute"):
NET_NAME_PREDICTABLE:
The ifname has been assigned by the kernel in a predictable way
[...] Examples include [...] and names deduced from hardware
properties (including being given explicitly by the firmware).
Expose that information properly for the benefit of userspace tools
that make decisions based on the name_assign_type attribute,
e.g. a systemd-udev rule with "kernel" in NamePolicy.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.faineli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rasmus Villemoes [Wed, 16 Nov 2022 10:52:02 +0000 (11:52 +0100)]
net: dsa: refactor name assignment for user ports
The following two patches each have a (small) chance of causing
regressions for userspace and will in that case of course need to be
reverted.
In order to prepare for that and make those two patches independent
and individually revertable, refactor the code which sets the names
for user ports by moving the "fall back to eth%d if no label is given
in device tree" to dsa_slave_create().
No functional change (at least none intended).
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.faineli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vincent Mailhol [Wed, 16 Nov 2022 17:18:28 +0000 (02:18 +0900)]
ethtool: doc: clarify what drivers can implement in their get_drvinfo()
Many of the drivers which implement ethtool_ops::get_drvinfo() will
prints the .driver, .version or .bus_info of struct ethtool_drvinfo.
To have a glance of current state, do:
$ git grep -W "get_drvinfo(struct"
Printing in those three fields is useless because:
- since [1], the driver version should be the kernel version (at
least for upstream drivers). Arguably, out of tree drivers might
still want to set a custom version, but out of tree is not our
focus.
- since [2], the core is able to provide default values for .driver
and .bus_info.
In summary, drivers may provide .fw_version and .erom_version, the
rest is expected to be done by the core.
In struct ethtool_ops doc from linux/ethtool: rephrase field
get_drvinfo() doc to discourage developers from implementing this
callback.
In struct ethtool_drvinfo doc from uapi/linux/ethtool.h: remove the
paragraph mentioning what drivers should do. Rationale: no need to
repeat what is already written in struct ethtool_ops doc. But add a
note that .fw_version and .erom_version are driver defined.
Also update the dummy driver and simply remove the callback in order
not to confuse the newcomers: most of the drivers will not need this
callback function any more.
Dan Carpenter [Tue, 15 Nov 2022 13:09:55 +0000 (16:09 +0300)]
net: ethernet: renesas: Fix return type in rswitch_etha_wait_link_verification()
The rswitch_etha_wait_link_verification() is supposed to return zero
on success or negative error codes. Unfortunately it is declared as a
bool so the caller treats everything as success.
Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/Y3OPo6AOL6PTvXFU@kili Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Kalle Valo [Thu, 17 Nov 2022 12:53:45 +0000 (14:53 +0200)]
Merge tag 'iwlwifi-next-for-kalle-2022-11-06-v2' of http://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
iwlwifi patches intended for v6.2
* iwlmei fixes
* Debug mechanism update for new devices (BZ)
* Checksum offload fix for the new devices (BZ)
* A few rate scale fixes and cleanups
* A fix for iwlwifi debug mechanism
* Start of MLO preparations - supporting new key API
Dmitry Vyukov [Tue, 15 Nov 2022 10:00:17 +0000 (11:00 +0100)]
NFC: nci: Allow to create multiple virtual nci devices
The current virtual nci driver is great for testing and fuzzing.
But it allows to create at most one "global" device which does not allow
to run parallel tests and harms fuzzing isolation and reproducibility.
Restructure the driver to allow creation of multiple independent devices.
This should be backwards compatible for existing tests.
Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Bongsu Jeon <bongsu.jeon@samsung.com> Cc: Bongsu Jeon <bongsu.jeon@samsung.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Jakub Kicinski <kuba@kernel.org> Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/20221115100017.787929-1-dvyukov@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Hangbin Liu [Tue, 15 Nov 2022 14:24:00 +0000 (22:24 +0800)]
net: use struct_group to copy ip/ipv6 header addresses
kernel test robot reported warnings when build bonding module with
make W=1 O=build_dir ARCH=x86_64 SHELL=/bin/bash drivers/net/bonding/:
from ../drivers/net/bonding/bond_main.c:35:
In function ‘fortify_memcpy_chk’,
inlined from ‘iph_to_flow_copy_v4addrs’ at ../include/net/ip.h:566:2,
inlined from ‘bond_flow_ip’ at ../drivers/net/bonding/bond_main.c:3984:3:
../include/linux/fortify-string.h:413:25: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of f
ield (2nd parameter); maybe use struct_group()? [-Wattribute-warning]
413 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘fortify_memcpy_chk’,
inlined from ‘iph_to_flow_copy_v6addrs’ at ../include/net/ipv6.h:900:2,
inlined from ‘bond_flow_ip’ at ../drivers/net/bonding/bond_main.c:3994:3:
../include/linux/fortify-string.h:413:25: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of f
ield (2nd parameter); maybe use struct_group()? [-Wattribute-warning]
413 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This is because we try to copy the whole ip/ip6 address to the flow_key,
while we only point the to ip/ip6 saddr. Note that since these are UAPI
headers, __struct_group() is used to avoid the compiler warnings.
Reported-by: kernel test robot <lkp@intel.com> Fixes: c3f8324188fa ("net: Add full IPv6 addresses to flow_keys") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20221115142400.1204786-1-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
An external PHY needs settling time after power up or reset.
In the bind() function an mdio bus is registered. If at this point
the external PHY is still initialising, no valid PHY ID will be
read and on phy_find_first() the bind() function will fail.
If an external PHY is present, wait the maximum time specified
in 802.3 45.2.7.1.1.
Jacob Keller [Mon, 14 Nov 2022 21:37:01 +0000 (13:37 -0800)]
mlxsw: update adjfine to use adjust_by_scaled_ppm
The mlxsw adjfine implementation in the spectrum_ptp.c file converts
scaled_ppm into ppb before updating a cyclecounter multiplier using the
standard "base * ppb / 1billion" calculation.
This can be re-written to use adjust_by_scaled_ppm, directly using the
scaled parts per million and reducing the amount of code required to
express this calculation.
We still calculate the parts per billion for passing into
mlxsw_sp_ptp_phc_adjfreq because this function requires the input to be in
parts per billion.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Cc: Amit Cohen <amcohen@nvidia.com> Cc: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20221114213701.815132-1-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Wed, 16 Nov 2022 18:49:06 +0000 (10:49 -0800)]
Merge tag 'for-linus-6.1-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Two trivial cleanups, and three simple fixes"
* tag 'for-linus-6.1-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/platform-pci: use define instead of literal number
xen/platform-pci: add missing free_irq() in error path
xen-pciback: Allow setting PCI_MSIX_FLAGS_MASKALL too
xen/pcpu: fix possible memory leak in register_pcpu()
x86/xen: Use kstrtobool() instead of strtobool()
Linus Torvalds [Wed, 16 Nov 2022 18:40:00 +0000 (10:40 -0800)]
Merge tag 'pinctrl-v6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Aere is a hopefully final round of pin control fixes. Nothing special,
driver fixes and we caught a potential NULL pointer exception.
- Fix a potential NULL dereference in the core!
- Fix all pin mux routes in the Rockchop PX30 driver
- Fix the UFS pins in the Qualcomm SC8280XP driver
- Fix bias disabling in the Mediatek driver
- Fix debounce time settings in the Mediatek driver"
* tag 'pinctrl-v6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: mediatek: Export debounce time tables
pinctrl: mediatek: Fix EINT pins input debounce time configuration
pinctrl: devicetree: fix null pointer dereferencing in pinctrl_dt_to_map
pinctrl: mediatek: common-v2: Fix bias-disable for PULL_PU_PD_RSEL_TYPE
pinctrl: qcom: sc8280xp: Rectify UFS reset pins
pinctrl: rockchip: list all pins in a possible mux route for PX30
Linus Torvalds [Wed, 16 Nov 2022 18:36:13 +0000 (10:36 -0800)]
Merge tag 'platform-drivers-x86-v6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- Surface Pro 9 and Surface Laptop 5 kbd, battery, etc support (this
is just a few hw-id additions)
- A couple of other hw-id / DMI-quirk additions
- A few small bug fixes + 1 build fix
* tag 'platform-drivers-x86-v6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: ideapad-laptop: Add module parameters to match DMI quirk tables
platform/x86: ideapad-laptop: Fix interrupt storm on fn-lock toggle on some Yoga laptops
platform/x86: hp-wmi: Ignore Smart Experience App event
platform/surface: aggregator_registry: Add support for Surface Laptop 5
platform/surface: aggregator_registry: Add support for Surface Pro 9
platform/surface: aggregator: Do not check for repeated unsequenced packets
platform/x86: acer-wmi: Enable SW_TABLET_MODE on Switch V 10 (SW5-017)
platform/x86: asus-wmi: add missing pci_dev_put() in asus_wmi_set_xusb2pr()
platform/x86/intel: pmc: Don't unconditionally attach Intel PMC when virtualized
platform/x86: thinkpad_acpi: Enable s2idle quirk for 21A1 machine type
platform/x86/amd: pmc: Add new ACPI ID AMDI0009
platform/x86/amd: pmc: Remove more CONFIG_DEBUG_FS checks
Gleb Mazovetskiy [Mon, 14 Nov 2022 22:56:16 +0000 (22:56 +0000)]
tcp: configurable source port perturb table size
On embedded systems with little memory and no relevant
security concerns, it is beneficial to reduce the size
of the table.
Reducing the size from 2^16 to 2^8 saves 255 KiB
of kernel RAM.
Makes the table size configurable as an expert option.
The size was previously increased from 2^8 to 2^16
in commit 4c2c8f03a5ab ("tcp: increase source port perturb table to
2^16").
Signed-off-by: Gleb Mazovetskiy <glex.spb@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Sitnicki [Mon, 14 Nov 2022 19:16:19 +0000 (20:16 +0100)]
l2tp: Serialize access to sk_user_data with sk_callback_lock
sk->sk_user_data has multiple users, which are not compatible with each
other. Writers must synchronize by grabbing the sk->sk_callback_lock.
l2tp currently fails to grab the lock when modifying the underlying tunnel
socket fields. Fix it by adding appropriate locking.
We err on the side of safety and grab the sk_callback_lock also inside the
sk_destruct callback overridden by l2tp, even though there should be no
refs allowing access to the sock at the time when sk_destruct gets called.
v4:
- serialize write to sk_user_data in l2tp sk_destruct
v3:
- switch from sock lock to sk_callback_lock
- document write-protection for sk_user_data
v2:
- update Fixes to point to origin of the bug
- use real names in Reported/Tested-by tags
Cc: Tom Parkin <tparkin@katalix.com> Fixes: 3557baabf280 ("[L2TP]: PPP over L2TP driver core") Reported-by: Haowei Yan <g1042620637@gmail.com> Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 15 Nov 2022 08:53:56 +0000 (08:53 +0000)]
ipv6/sit: use DEV_STATS_INC() to avoid data-races
syzbot/KCSAN reported that multiple cpus are updating dev->stats.tx_error
concurrently.
This is because sit tunnels are NETIF_F_LLTX, meaning their ndo_start_xmit()
is not protected by a spinlock.
While original KCSAN report was about tx path, rx path has the same issue.
Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 15 Nov 2022 08:53:55 +0000 (08:53 +0000)]
net: add atomic_long_t to net_device_stats fields
Long standing KCSAN issues are caused by data-race around
some dev->stats changes.
Most performance critical paths already use per-cpu
variables, or per-queue ones.
It is reasonable (and more correct) to use atomic operations
for the slow paths.
This patch adds an union for each field of net_device_stats,
so that we can convert paths that are not yet protected
by a spinlock or a mutex.
netdev_stats_to_stats64() no longer has an #if BITS_PER_LONG==64
Note that the memcpy() we were using on 64bit arches
had no provision to avoid load-tearing,
while atomic_long_read() is providing the needed protection
at no cost.
Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Mon, 14 Nov 2022 14:42:56 +0000 (16:42 +0200)]
net: linkwatch: only report IF_OPER_LOWERLAYERDOWN if iflink is actually down
RFC 2863 says:
The lowerLayerDown state is also a refinement on the down state.
This new state indicates that this interface runs "on top of" one or
more other interfaces (see ifStackTable) and that this interface is
down specifically because one or more of these lower-layer interfaces
are down.
DSA interfaces are virtual network devices, stacked on top of the DSA
master, but they have a physical MAC, with a PHY that reports a real
link status.
But since DSA (perhaps improperly) uses an iflink to describe the
relationship to its master since commit c084080151e1 ("dsa: set ->iflink
on slave interfaces to the ifindex of the parent"), default_operstate()
will misinterpret this to mean that every time the carrier of a DSA
interface is not ok, it is because of the master being not ok.
In fact, since commit c0a8a9c27493 ("net: dsa: automatically bring user
ports down when master goes down"), DSA cannot even in theory be in the
lowerLayerDown state, because it just calls dev_close_many(), thereby
going down, when the master goes down.
We could revert the commit that creates an iflink between a DSA user
port and its master, especially since now we have an alternative
IFLA_DSA_MASTER which has less side effects. But there may be tooling in
use which relies on the iflink, which has existed since 2009.
We could also probably do something local within DSA to overwrite what
rfc2863_policy() did, in a way similar to hsr_set_operstate(), but this
seems like a hack.
What seems appropriate is to follow the iflink, and check the carrier
status of that interface as well. If that's down too, yes, keep
reporting lowerLayerDown, otherwise just down.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This series is the UDP version of the per-netns ehash series [0],
which were initially in the same patch set. [1]
The notable difference with TCP is the max table size is 64K and the min
size is 128. This is because the possible hash range by udp_hashfn()
always fits in 64K within the same netns and because we want to keep a
bitmap in udp_lib_get_port() on the stack. Also, the UDP per-netns table
isolates both 1-tuple and 2-tuple tables.
The maximum hash table size is 64K due to the nature of the protocol. [0]
It's smaller than TCP, and fewer sockets can cause a performance drop.
On an EC2 c5.24xlarge instance (192 GiB memory), after running iperf3 in
different netns, creating 32Mi sockets without data transfer in the root
netns causes regression for the iperf3's connection.
The per-netns hash table breaks the lengthy lists into shorter ones. It is
useful on a multi-tenant system with thousands of netns. With smaller hash
tables, we can look up sockets faster, isolate noisy neighbours, and reduce
lock contention.
The max size of the per-netns table is 64K as well. This is because the
possible hash range by udp_hashfn() always fits in 64K within the same
netns and we cannot make full use of the whole buckets larger than 64K.
/* 0 < num < 64K -> X < hash < X + 64K */
(num + net_hash_mix(net)) & mask;
Also, the min size is 128. We use a bitmap to search for an available
port in udp_lib_get_port(). To keep the bitmap on the stack and not
fire the CONFIG_FRAME_WARN error at build time, we round up the table
size to 128.
# ip netns add test2
# ip netns exec test2 sysctl net.ipv4.udp_hash_entries
net.ipv4.udp_hash_entries = 128 # own a per-netns table with 2^n buckets
We could optimise the hash table lookup/iteration further by removing
the netns comparison for the per-netns one in the future. Also, we
could optimise the sparse udp_hslot layout by putting it in udp_table.
This patch adds no functional change and cleans up some functions
that the following patches touch around so that we make them tidy
and easy to review/revert. The change is mainly to keep reverse
christmas tree order.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Torokhov [Wed, 9 Nov 2022 22:42:48 +0000 (14:42 -0800)]
ARM: OMAP2+: pdata-quirks: stop including wl12xx.h
As of commit 2398c41d6432 ("omap: pdata-quirks: remove openpandora
quirks for mmc3 and wl1251") the code no longer creates an instance of
wl1251_platform_data, so there is no need for including this header.
When built with Control Flow Integrity, function prototypes between
caller and function declaration must match. These mismatches are visible
at compile time with the new -Wcast-function-type-strict in Clang[1].
Fix a total of 32 warnings like these:
../drivers/net/wireless/cisco/airo.c:7570:2: warning: cast from 'int (*)(struct net_device *, struct iw_request_info *, void *, char *)' to 'iw_handler' (aka 'int (*)(struct net_device *, struct iw_request_info *, union iwreq_data *, char *)') converts to incompatible function type [-Wcast-function-type-strict]
(iw_handler) airo_config_commit, /* SIOCSIWCOMMIT */
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The airo Wireless Extension handler callbacks (iw_handler) use a
union for the data argument. Actually use the union and perform explicit
member selection in the function body instead of having a function
prototype mismatch. There are no resulting binary differences
before/after changes.
These changes were made partly manually and partly with the help of
Coccinelle.
When built with Control Flow Integrity, function prototypes between
caller and function declaration must match. These mismatches are visible
at compile time with the new -Wcast-function-type-strict in Clang[1].
Fix a total of 30 warnings like these:
../drivers/net/wireless/zydas/zd1201.c:1560:2: warning: cast from 'int (*)(struct net_device *, struct iw_request_info *, struct iw_freq *, char *)' to 'iw_handler' (aka 'int (*)(struct net_device *, struct iw_request_info *, union iwreq_data *, char *)') converts to incompatible function type [-Wcast-function-type-strict]
(iw_handler) zd1201_set_freq, /* SIOCSIWFREQ */
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
The zd1201 Wireless Extension handler callbacks (iw_handler) use a
union for the data argument. Actually use the union and perform explicit
member selection in the function body instead of having a function
prototype mismatch.There are no resulting binary differences
before/after changes.
These changes were made partly manually and partly with the help of
Coccinelle.
When built with Control Flow Integrity, function prototypes between
caller and function declaration must match. These mismatches are visible
at compile time with the new -Wcast-function-type-strict in Clang[1].
Fix a total of 42 warnings like these:
../drivers/net/wireless/intersil/hostap/hostap_ioctl.c:3868:2: warning: cast from 'int (*)(struct net_device *, struct iw_request_info *, char *, char *)' to 'iw_handler' (aka 'int (*)(struct net_device *, struct iw_request_info *, union iwreq_data *, char *)') converts to incompatible function type [-Wcast-function-type-strict]
(iw_handler) prism2_get_name, /* SIOCGIWNAME */
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
The hostap Wireless Extension handler callbacks (iw_handler) use a
union for the data argument. Actually use the union and perform explicit
member selection in the function body instead of having a function
prototype mismatch. There are no resulting binary differences
before/after changes.
These changes were made partly manually and partly with the help of
Coccinelle.
wifi: cfg80211: Avoid clashing function prototypes
When built with Control Flow Integrity, function prototypes between
caller and function declaration must match. These mismatches are visible
at compile time with the new -Wcast-function-type-strict in Clang[1].
Fix a total of 73 warnings like these:
drivers/net/wireless/intersil/orinoco/wext.c:1379:27: warning: cast from 'int (*)(struct net_device *, struct iw_request_info *, struct iw_param *, char *)' to 'iw_handler' (aka 'int (*)(struct net_device *, struct iw_request_info *, union iwreq_data *, char *)') converts to incompatible function type [-Wcast-function-type-strict]
IW_HANDLER(SIOCGIWPOWER, (iw_handler)orinoco_ioctl_getpower),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../net/wireless/wext-compat.c:1607:33: warning: cast from 'int (*)(struct net_device *, struct iw_request_info *, struct iw_point *, char *)' to 'iw_handler' (aka 'int (*)(struct net_device *, struct iw_request_info *, union iwreq_data *, char *)') converts to incompatible function type [-Wcast-function-type-strict]
[IW_IOCTL_IDX(SIOCSIWGENIE)] = (iw_handler) cfg80211_wext_siwgenie,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/net/wireless/intersil/orinoco/wext.c:1390:27: error: incompatible function pointer types initializing 'const iw_handler' (aka 'int (*const)(struct net_device *, struct iw_request_info *, union iwreq_data *, char *)') with an expression of type 'int (struct net_device *, struct iw_request_info *, struct iw_param *, char *)' [-Wincompatible-function-pointer-types]
IW_HANDLER(SIOCGIWRETRY, cfg80211_wext_giwretry),
^~~~~~~~~~~~~~~~~~~~~~
The cfg80211 Wireless Extension handler callbacks (iw_handler) use a
union for the data argument. Actually use the union and perform explicit
member selection in the function body instead of having a function
prototype mismatch. There are no resulting binary differences
before/after changes.
These changes were made partly manually and partly with the help of
Coccinelle.
When built with Control Flow Integrity, function prototypes between
caller and function declaration must match. These mismatches are visible
at compile time with the new -Wcast-function-type-strict in Clang[1].
Fix a total of 43 warnings like these:
drivers/net/wireless/intersil/orinoco/wext.c:1379:27: warning: cast from 'int (*)(struct net_device *, struct iw_request_info *, struct iw_param *, char *)' to 'iw_handler' (aka 'int (*)(struct net_device *, struct iw_request_info *, union iwreq_data *, char *)') converts to incompatible function type [-Wcast-function-type-strict]
IW_HANDLER(SIOCGIWPOWER, (iw_handler)orinoco_ioctl_getpower),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The orinoco Wireless Extension handler callbacks (iw_handler) use a
union for the data argument. Actually use the union and perform explicit
member selection in the function body instead of having a function
prototype mismatch. No significant binary differences were seen
before/after changes.
These changes were made partly manually and partly with the help of
Coccinelle.
Bitterblue Smith [Thu, 10 Nov 2022 13:59:29 +0000 (15:59 +0200)]
wifi: rtl8xxxu: Use strscpy instead of sprintf
Fill priv->chip_name and priv->chip_vendor with strscpy instead of
sprintf. This is just to prevent future bugs in case the name of a
chip/vendor becomes longer than the size of chip_name/chip_vendor.
projects / mirror_ubuntu-kernels.git / log