]> git.proxmox.com Git - mirror_ubuntu-hirsute-kernel.git/log
mirror_ubuntu-hirsute-kernel.git
19 years ago[SCSI] mptsas: fix phy identifiers
Christoph Hellwig [Mon, 17 Oct 2005 13:40:52 +0000 (15:40 +0200)]
[SCSI] mptsas: fix phy identifiers

This patch from Eric fixes handling of the phy identifiers in mptsas.
I've split it up from his bigger patch as it should go into 2.6.14
still.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
19 years ago[SCSI] 2.6.13.3; add Pioneer DRM-624x to drivers/scsi/scsi_devinfo.c
Karl Magnus Kolstoe [Mon, 17 Oct 2005 08:05:42 +0000 (10:05 +0200)]
[SCSI] 2.6.13.3; add Pioneer DRM-624x to drivers/scsi/scsi_devinfo.c

The patch below should make the Pioneer DRM-624X automatically
be set up with all 6 "drives". (6 slot SCSI CD changer)

Signed-off-by: Karl Magnus Kolstø <karl.kolsto@uib.no>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
19 years ago[SCSI] Fix leak of Scsi_Cmnds
Alan Stern [Fri, 14 Oct 2005 15:23:27 +0000 (11:23 -0400)]
[SCSI] Fix leak of Scsi_Cmnds

When a request is deferred in scsi_init_io because the sg table could not
be allocated, the associated scsi_cmnd is not released and the request is
not marked with REQ_DONTPREP.  When the command is retried, if
scsi_prep_fn decides to kill it then the scsi_cmnd will never be released.

This patch (as573) changes scsi_init_io so that it calls scsi_put_command
before deferring a request.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
19 years ago[SCSI] FW: [PATCH] for Deadlock in transport_fc
James.Smart@Emulex.Com [Wed, 5 Oct 2005 17:50:08 +0000 (13:50 -0400)]
[SCSI] FW: [PATCH] for Deadlock in transport_fc

Cannot call fc_rport_terminate() under the host lock, so drop the
lock.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
19 years ago[SCSI] Fix aacraid regression
Salyzyn, Mark [Wed, 5 Oct 2005 16:58:38 +0000 (12:58 -0400)]
[SCSI] Fix aacraid regression

Juan was kind enough to linger on site, and work on a production
machine, to try the parameter to make the system stable. He discovered
that reducing the maximum transfer size issued to the adapter to 128KB
stabilized his system. This is related to an earlier change for the
2.6.13 tree resulting from Martin Drab's testing where the transfer size
was reduced from 4G to 256KB; we needed to go still further in scaling
back the request size.

Here is the patch that tames this regression.

Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
19 years ago[SCSI] NCR5380: fix undefined preprocessor identifier
Randy Dunlap [Mon, 3 Oct 2005 00:15:29 +0000 (17:15 -0700)]
[SCSI] NCR5380: fix undefined preprocessor identifier

Fix 12 undefined preprocessor identifier warnings (4 each in 3 driver builds):
drivers/scsi/NCR5380.c:2744:16: warning: undefined preprocessor identifier 'NDEBUG_ABORT'
drivers/scsi/NCR5380.c:2744:16: warning: "NDEBUG_ABORT" is not defined

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
19 years ago[PATCH] usbserial: Regression in USB generic serial driver
Randall Nortman [Sat, 15 Oct 2005 00:21:50 +0000 (17:21 -0700)]
[PATCH] usbserial: Regression in USB generic serial driver

Kernel version 2.6.13 introduced a regression in the generic USB
serial converter driver (usbserial.o, drivers/usb/serial/generic.c).
The bug manifests, as far as I can tell, whenever you attempt to write
to the device -- the write will never complete (write() returns 0, or
blocks).

Signed-off-by: Randall Nortman <oss@wonderclown.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Sat, 15 Oct 2005 00:17:04 +0000 (17:17 -0700)]
Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6

19 years agoMerge master.kernel.org:/home/rmk/linux-2.6-serial
Linus Torvalds [Sat, 15 Oct 2005 00:16:55 +0000 (17:16 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-serial

19 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Sat, 15 Oct 2005 00:16:35 +0000 (17:16 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

19 years ago[PATCH] megaraid maintainers entry
Kolli, Neela Syam [Fri, 14 Oct 2005 22:59:13 +0000 (15:59 -0700)]
[PATCH] megaraid maintainers entry

I am taking over all Megaraid SCSI drivers.  Here is the patch for the
MAINTENERS file.

Signed-off-by: Neela Syam Kolli <Neela.Kolli@engenio.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] sh-sci.c sci_start_tx error
Yoshinori Sato [Fri, 14 Oct 2005 22:59:12 +0000 (15:59 -0700)]
[PATCH] sh-sci.c sci_start_tx error

Argument does not agree.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] nommu build error fix
Yoshinori Sato [Fri, 14 Oct 2005 22:59:11 +0000 (15:59 -0700)]
[PATCH] nommu build error fix

"proc_smaps_operations" is not defined in case of "CONFIG_MMU=n".

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] Dallas's 1-wire bus compile error
Evgeniy Polyakov [Fri, 14 Oct 2005 22:59:11 +0000 (15:59 -0700)]
[PATCH] Dallas's 1-wire bus compile error

drivers/built-in.o: In function `w1_alloc_dev': undefined reference to `netlink_kernel_create'
drivers/built-in.o: In function `w1_alloc_dev': undefined reference to `sock_release'

Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] aacraid: host_lock not released fix
Mark Haverkamp [Fri, 14 Oct 2005 22:59:10 +0000 (15:59 -0700)]
[PATCH] aacraid: host_lock not released fix

While doing some testing of error cases I ran into this bug.  In some cases
the reset handler can exit with the host_lock still held.

Signed-off-by: Mark Haverkamp <markh@osdl.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc64: Fix G5 model in /proc/cpuinfo
Benjamin Herrenschmidt [Fri, 14 Oct 2005 22:59:09 +0000 (15:59 -0700)]
[PATCH] ppc64: Fix G5 model in /proc/cpuinfo

Andreas Schwab spotted that recent kernels broke reporting of the PowerMac
machine model in /proc/cpuinfo.  This fixes it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] m32r: Fix smp.c for preempt kernel
Hirokazu Takata [Fri, 14 Oct 2005 22:59:07 +0000 (15:59 -0700)]
[PATCH] m32r: Fix smp.c for preempt kernel

This patch fixes the following BUG message of arch/m32r/smp.c for
CONFIG_DEBUG_PREEMPT:

BUG: using smp_processor_id() in preemptible

This message is displayed by an smp_processor_id() execution during
kernel's preemptible-state.

Signed-off-by: Hitoshi Yamamoto <hitoshiy@isl.melco.co.jp>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] wireless/airo: Build fix
Matteo Croce [Fri, 14 Oct 2005 22:59:06 +0000 (15:59 -0700)]
[PATCH] wireless/airo: Build fix

The aironet PCI driver has a build dependency on ISA that prevent the
driver to compile on systems that doesn't support ISA, like x86_64.  The
driver really doesn't depend on ISA, it does some ISA stuff in the
initialization code, since the driver supports both ISA and PCI cards.  So
the driver should depend on ISA_DMA_API to build on all systems, and this
will not hurt PCI at all.

Signed-off-by: Matteo Croce <3297627799@wind.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] Fix copy-and-paste error in BSD accounting
Tim Schmielau [Fri, 14 Oct 2005 22:59:05 +0000 (15:59 -0700)]
[PATCH] Fix copy-and-paste error in BSD accounting

Fix copy and paste error in jiffies_to_AHZ conversion which leads to wrong
BSD accounting information on alpha and ia64 when
CONFIG_BSD_PROCESS_ACCT_V3 is turned on.

Also update comment to match reorganised header files.

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] radio-cadet: check request_region() return value correctly
Alexey Dobriyan [Fri, 14 Oct 2005 22:59:04 +0000 (15:59 -0700)]
[PATCH] radio-cadet: check request_region() return value correctly

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] Add missing export of getnstimeofday()
Takashi Iwai [Fri, 14 Oct 2005 22:59:03 +0000 (15:59 -0700)]
[PATCH] Add missing export of getnstimeofday()

Adds the missing EXPORT_SYMBOL_GPL for getnstimeofday() when
CONFIG_TIME_INTERPOLATION isn't set.  Needed by drivers/char/mmtimer.c

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] zaurus: fix dependencies on collie keyboard
Pavel Machek [Fri, 14 Oct 2005 22:59:03 +0000 (15:59 -0700)]
[PATCH] zaurus: fix dependencies on collie keyboard

This fixes depenencies of collie keyboard.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] zaurus: fix soc_common.c
Pavel Machek [Fri, 14 Oct 2005 22:59:02 +0000 (15:59 -0700)]
[PATCH] zaurus: fix soc_common.c

This fixes wrong comments, non-working debug subsystem, and some
potentially dangerous macros.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] zaurus: fix compilation with cpufreq disabled
Pavel Machek [Fri, 14 Oct 2005 22:59:01 +0000 (15:59 -0700)]
[PATCH] zaurus: fix compilation with cpufreq disabled

This fixes compilation with CPU_FREQ disabled.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] mips: fix build error in TANBAC TB0226
Yoichi Yuasa [Fri, 14 Oct 2005 22:59:00 +0000 (15:59 -0700)]
[PATCH] mips: fix build error in TANBAC TB0226

arch/mips/pci/fixup-tb0226.c: In function `pcibios_map_irq':
arch/mips/pci/fixup-tb0226.c:31: warning: implicit declaration of function `vr41xx_set_irq_trigger'
arch/mips/pci/fixup-tb0226.c:32: error: `TRIGGER_LEVEL' undeclared (first use in this function)
arch/mips/pci/fixup-tb0226.c:32: error: (Each undeclared identifier is reported only once
arch/mips/pci/fixup-tb0226.c:32: error: for each function it appears in.)
arch/mips/pci/fixup-tb0226.c:33: error: `SIGNAL_THROUGH' undeclared (first use in this function)
arch/mips/pci/fixup-tb0226.c:34: warning: implicit declaration of function `vr41xx_set_irq_level'
arch/mips/pci/fixup-tb0226.c:34: error: `LEVEL_LOW' undeclared (first use in this function)

Signed-off-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[SPARC64]: Fix powering off on SMP.
David S. Miller [Fri, 14 Oct 2005 22:26:08 +0000 (15:26 -0700)]
[SPARC64]: Fix powering off on SMP.

Doing a "SUNW,stop-self" firmware call on the other cpus is not the
correct thing to do when dropping into the firmware for a halt,
reboot, or power-off.

For now, just do nothing to quiet the other cpus, as the system should
be quiescent enough.  Later we may decide to implement smp_send_stop()
like the other SMP platforms do.

Based upon a report from Christopher Zimmermann.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[QLOGICPTI]: Handle INQUIRY response sniffing correctly.
David S. Miller [Fri, 14 Oct 2005 20:44:32 +0000 (13:44 -0700)]
[QLOGICPTI]: Handle INQUIRY response sniffing correctly.

These days, in 2.6.x, even INQUIRY commands are sent using
scatter gather lists.

Bug reported by Tom 'spot' Callaway.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[ARM] 3014/1: Spitz keyboard: Correct the right shift key
Richard Purdie [Fri, 14 Oct 2005 15:07:28 +0000 (16:07 +0100)]
[ARM] 3014/1: Spitz keyboard: Correct the right shift key

Patch from Richard Purdie

Correct the right shift key entry in the spitz keyboard driver.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[ARM] 3013/1: Spitz: Fix compile errors
Richard Purdie [Fri, 14 Oct 2005 15:07:27 +0000 (16:07 +0100)]
[ARM] 3013/1: Spitz: Fix compile errors

Patch from Richard Purdie

Remove a couple of lines of accidently added code causing compile
errors.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[ARM] 3012/1: Corgi/Spitz LCD: Use bus_find_device to locate pxafb - fix compile...
Richard Purdie [Fri, 14 Oct 2005 15:07:26 +0000 (16:07 +0100)]
[ARM] 3012/1: Corgi/Spitz LCD: Use bus_find_device to locate pxafb - fix compile error

Patch from Richard Purdie

Update corgi_lcd to use bus_find_device to locate the pxafb device
hence fixing a compile error.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[ARM] 3011/1: pxafb: Add ability to set device parent + fix spitz compile error
Richard Purdie [Fri, 14 Oct 2005 15:07:25 +0000 (16:07 +0100)]
[ARM] 3011/1: pxafb: Add ability to set device parent + fix spitz compile error

Patch from Richard Purdie

Add a function to allow machines to set the parent of the pxa
framebuffer device. This means the power up/down sequence can be
controlled where required by the machine.

Update spitz to use the new function, fixing a compile error.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[SERIAL] Add SupraExpress 336i Sp ASVD modem ID
Baris Cicek [Fri, 14 Oct 2005 13:32:40 +0000 (14:32 +0100)]
[SERIAL] Add SupraExpress 336i Sp ASVD modem ID

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[ARM] 2980/1: Fix L7200 core.c compile
Deepak Saxena [Fri, 14 Oct 2005 11:49:15 +0000 (12:49 +0100)]
[ARM] 2980/1: Fix L7200 core.c compile

Patch from Deepak Saxena

This patch fixes L7200 so that it builds in 2.6.latest. I do not
have the hardware so don't know if it actually still works, but
the changes are fairly trivial. I am not even sure if anyone
still maintains, uses, or cares about this machine type.

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[ARM] 3009/1: S3C2410 - io.h offsets too large for LDRH/STRH
Ben Dooks [Fri, 14 Oct 2005 11:24:24 +0000 (12:24 +0100)]
[ARM] 3009/1: S3C2410 - io.h offsets too large for LDRH/STRH

Patch from Ben Dooks

The __inwc/__outwc calls are capable of creating
LDRH and STRH instructions with offsets over 8bits
as GCC does not have a constraint for an 8bit
offset.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[SPARC64]: Eliminate PCI IOMMU dma mapping size limit.
David S. Miller [Fri, 14 Oct 2005 05:15:24 +0000 (22:15 -0700)]
[SPARC64]: Eliminate PCI IOMMU dma mapping size limit.

The hairy fast allocator in the sparc64 PCI IOMMU code
has a hard limit of 256 pages.  Certain devices can
exceed this when performing very large I/Os.

So replace with a more simple allocator, based largely
upon the arch/ppc64/kernel/iommu.c code.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[SPARC64]: Consolidate common PCI IOMMU init code.
David S. Miller [Fri, 14 Oct 2005 04:10:08 +0000 (21:10 -0700)]
[SPARC64]: Consolidate common PCI IOMMU init code.

All the PCI controller drivers were doing the same thing
setting up the IOMMU software state, put it all in one spot.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years agoMerge branch 'release' of master.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6
Linus Torvalds [Thu, 13 Oct 2005 23:10:54 +0000 (16:10 -0700)]
Merge branch 'release' of master.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6

19 years ago[TCP]: Ratelimit debugging warning.
Herbert Xu [Thu, 13 Oct 2005 21:42:24 +0000 (14:42 -0700)]
[TCP]: Ratelimit debugging warning.

Better safe than sorry.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[CONNECTOR]: Update documentation to match reality.
Evgeniy Polyakov [Thu, 13 Oct 2005 21:42:04 +0000 (14:42 -0700)]
[CONNECTOR]: Update documentation to match reality.

Updated documentation to reflect 2.6.14 netlink changes
about socket options, multicasting and group number.
Please concider for 2.6.14.

Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[NET]: Disable NET_SCH_CLK_CPU for SMP x86 hosts
Andi Kleen [Thu, 13 Oct 2005 21:41:44 +0000 (14:41 -0700)]
[NET]: Disable NET_SCH_CLK_CPU for SMP x86 hosts

Opterons with frequency scaling have fully unsynchronized TSCs
running at different frequencies, so using TSCs there is not a good idea.
Also some other x86 boxes have this problem. gettimeofday should be good
enough, so just disable it.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[NETFILTER]: Fix OOPSes on machines with discontiguous cpu numbering.
David S. Miller [Thu, 13 Oct 2005 21:41:23 +0000 (14:41 -0700)]
[NETFILTER]: Fix OOPSes on machines with discontiguous cpu numbering.

Original patch by Harald Welte, with feedback from Herbert Xu
and testing by Sébastien Bernard.

EBTABLES, ARP tables, and IP/IP6 tables all assume that cpus
are numbered linearly.  That is not necessarily true.

This patch fixes that up by calculating the largest possible
cpu number, and allocating enough per-cpu structure space given
that.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[ARM] 3008/1: the exception table is not read-only
Nicolas Pitre [Thu, 13 Oct 2005 21:04:37 +0000 (22:04 +0100)]
[ARM] 3008/1: the exception table is not read-only

Patch from Nicolas Pitre

... and therefore should not live in the .text section.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[ARM] 3007/1: BAST - add CONFIG_ISA to build
Ben Dooks [Thu, 13 Oct 2005 21:04:36 +0000 (22:04 +0100)]
[ARM] 3007/1: BAST - add CONFIG_ISA to build

Patch from Ben Dooks

The Simtec EB2410ITX (BAST) has a PC/104 slot, and
therefore we should enable CONFIG_ISA to allow the
drivers for ISA peripherals to be selected

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Thu, 13 Oct 2005 16:59:32 +0000 (09:59 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

19 years ago[ARM] 3006/1: S3C2410 - arch/arm/mach-s3c2410 sparse fixes
Ben Dooks [Thu, 13 Oct 2005 15:46:35 +0000 (16:46 +0100)]
[ARM] 3006/1: S3C2410 - arch/arm/mach-s3c2410 sparse fixes

Patch from Ben Dooks

Remove an unused variable from s3c2410.c and
ensure that items not needed to be exported from
s3c2440.c are declared static.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[ARM] 3005/1: S3C2440 - add definition for s3c2440_set_dsc() call in hardware.h
Ben Dooks [Thu, 13 Oct 2005 15:46:35 +0000 (16:46 +0100)]
[ARM] 3005/1: S3C2440 - add definition for s3c2440_set_dsc() call in hardware.h

Patch from Ben Dooks

include/asm-arm/arch-s3c2410/hardware.h was missing
the definition for s3c2440_set_dsc()

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Thu, 13 Oct 2005 02:08:10 +0000 (19:08 -0700)]
Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6

19 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Thu, 13 Oct 2005 02:07:59 +0000 (19:07 -0700)]
Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

19 years agoMerge branch 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Thu, 13 Oct 2005 02:07:38 +0000 (19:07 -0700)]
Merge branch 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev

19 years agoMerge branch 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Thu, 13 Oct 2005 02:07:19 +0000 (19:07 -0700)]
Merge branch 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6

19 years ago[TCP]: Add code to help track down "BUG at net/ipv4/tcp_output.c:438!"
Herbert Xu [Wed, 12 Oct 2005 22:59:39 +0000 (15:59 -0700)]
[TCP]: Add code to help track down "BUG at net/ipv4/tcp_output.c:438!"

This is the second report of this bug.  Unfortunately the first
reporter hasn't been able to reproduce it since to provide more
debugging info.

So let's apply this patch for 2.6.14 to

1) Make this non-fatal.
2) Provide the info we need to track it down.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[NETPOLL]: wrong return for null netpoll_poll_lock()
Ben Dooks [Wed, 12 Oct 2005 22:12:21 +0000 (15:12 -0700)]
[NETPOLL]: wrong return for null netpoll_poll_lock()

When netpoll is not being used, the macro that
defines the removed routing netpoll_poll_lock
defines the return as zero, but the real
routine returns a `void *`

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[BRIDGE]: fix race on bridge del if
Stephen Hemminger [Wed, 12 Oct 2005 22:10:01 +0000 (15:10 -0700)]
[BRIDGE]: fix race on bridge del if

This fixes the RCU race on bridge delete interface.  Basically,
the network device has to be detached from the bridge in the first
step (pre-RCU), rather than later. At that point, no more bridge traffic
will come in, and the other code will not think that network device
is part of a bridge.

This should also fix the XEN test problems.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[SPARC64]: Fix boot failures on SunBlade-150
David S. Miller [Wed, 12 Oct 2005 19:22:46 +0000 (12:22 -0700)]
[SPARC64]: Fix boot failures on SunBlade-150

The sequence to move over to the Linux trap tables from
the firmware ones needs to be more air tight.  It turns
out that to be %100 safe we do need to be able to translate
OBP mappings in our TLB miss handlers early.

In order not to eat up a lot of kernel image memory with
static page tables, just use the translations array in
the OBP TLB miss handlers.  That solves the bulk of the
problem.

Furthermore, to make sure the OBP TLB miss path will work
even before the fixed MMU globals are loaded, explicitly
load %g1 to TLB_SFSR at the beginning of the i-TLB and
d-TLB miss handlers.

To ease the OBP TLB miss walking of the prom_trans[] array,
we sort it then delete all of the non-OBP entries in there
(for example, there are entries for the kernel image itself
which we're not interested in at all).

We also save about 32K of kernel image size with this change.
Not a bad side effect :-)

There are still some reasons why trampoline.S can't use the
setup_trap_table() yet.  The most noteworthy are:

1) OBP boots secondary processors with non-bias'd stack for
   some reason.  This is easily fixed by using a small bootup
   stack in the kernel image explicitly for this purpose.

2) Doing a firmware call via the normal C call prom_set_trap_table()
   goes through the whole OBP enter/exit sequence that saves and
   restores OBP and Linux kernel state in the MMUs.  This path
   unfortunately does a "flush %g6" while loading up the OBP locked
   TLB entries for the firmware call.

   If we setup the %g6 in the trampoline.S code properly, that
   is in the PAGE_OFFSET linear mapping, but we're not on the
   kernel trap table yet so those addresses won't translate properly.

   One idea is to do a by-hand firmware call like we do in the
   early bootup code and elsewhere here in trampoline.S  But this
   fails as well, as aparently the secondary processors are not
   booted with OBP's special locked TLB entries loaded.  These
   are necessary for the firwmare to processes TLB misses correctly
   up until the point where we take over the trap table.

This does need to be resolved at some point.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[ARM] 3003/1: SSP channel map register updates for pxa2xx
Liam Girdwood [Wed, 12 Oct 2005 18:58:12 +0000 (19:58 +0100)]
[ARM] 3003/1: SSP channel map register updates for pxa2xx

Patch from Liam Girdwood

This patch updates the pxa2xx channel map registers definitions in
pxa-regs.h

Changes:-
  o Added description for SSP2 registers
  o Added definitions for SSP3 registers

Signed-off-by:Liam Girdwood <liam.girdwood@wolfsonmicro.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[ARM] 3002/1: Wrong parameter to uart_update_timeout() in drivers/serial/pxa.c
Lothar Wassmann [Wed, 12 Oct 2005 18:58:11 +0000 (19:58 +0100)]
[ARM] 3002/1: Wrong parameter to uart_update_timeout() in drivers/serial/pxa.c

Patch from Lothar Wassmann

The function serial_pxa_set_termios() is calling uart_update_timeout()
with the baud rate divisor as third parameter, while
uart_update_timeout() expects the baud rate in this place.
This results in a bogus port->timeout which is proportional to the
baud rate.

Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[ARM] 2978/1: nwfpe - clean up sparse errors
Ben Dooks [Wed, 12 Oct 2005 18:58:10 +0000 (19:58 +0100)]
[ARM] 2978/1: nwfpe - clean up sparse errors

Patch from Ben Dooks

The NWFPE is producing a number of errors from sparse
due to not defining a number of functions in the
header files.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[ARM] 2969/1: miscellaneous whitespace cleanup
George G. Davis [Wed, 12 Oct 2005 18:58:10 +0000 (19:58 +0100)]
[ARM] 2969/1: miscellaneous whitespace cleanup

Patch from George G. Davis

Fix leading, trailing and other miscellaneous whitespace issues
in arch/arm/kernel/alignment.c.

Signed-off-by: George G. Davis <gdavis@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[ARM] 2970/1: Use -mtune=arm1136j-s when building for CPU_V6 targets
George G. Davis [Wed, 12 Oct 2005 18:58:09 +0000 (19:58 +0100)]
[ARM] 2970/1: Use -mtune=arm1136j-s when building for CPU_V6 targets

Patch from George G. Davis

When building for CPU_V6 targets, we should use -mtune=arm1136j-s rather
than -mtune=strongarm but fall back to the later in case someone is
using an older toolchain (although they should really upgrade instead).

Signed-off-by: George G. Davis <gdavis@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[ARM] 2971/1: i.MX uart handle rts irq
Sascha Hauer [Wed, 12 Oct 2005 18:58:08 +0000 (19:58 +0100)]
[ARM] 2971/1: i.MX uart handle rts irq

Patch from Sascha Hauer

handle rts interrupt

Signed-off-by: Giancarlo Formicuccia <giancarlo.formicuccia@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[ARM] 2979/2: S3C2410 - add static to non-exported machine items
Ben Dooks [Wed, 12 Oct 2005 18:58:07 +0000 (19:58 +0100)]
[ARM] 2979/2: S3C2410 - add static to non-exported machine items

Patch from Ben Dooks

Do not export items that are not needed by symbol name
elsewhere

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[ARM] 2977/1: armksyms.c - make items in export table static
Ben Dooks [Wed, 12 Oct 2005 18:58:07 +0000 (19:58 +0100)]
[ARM] 2977/1: armksyms.c - make items in export table static

Patch from Ben Dooks

The items in the export table do not need to be
exported elsehwere, so quash the sparse warning
by making the symbol for the table entry static.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[ARM] 2976/1: S3C2410: add static to functions in serial driver
Ben Dooks [Wed, 12 Oct 2005 18:58:06 +0000 (19:58 +0100)]
[ARM] 2976/1: S3C2410: add static to functions in serial driver

Patch from Ben Dooks

The s3c2410 serial driver is missing static declerations
on several functions that are not exported, and have no
need of being exported outside the driver

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[ARM] 2975/1: S3C2410: time.c missing include of cpu.h
Ben Dooks [Wed, 12 Oct 2005 18:58:05 +0000 (19:58 +0100)]
[ARM] 2975/1: S3C2410: time.c missing include of cpu.h

Patch from Ben Dooks

arch/arm/mach-s3c2410/time.c is missing include
of cpu.h, causing the declaration of the timer
struct (s3c24xx_timer) to be flagged as missing
the declaration.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[ARM] 2974/1: fix ARM710 swi bug workaround
Nicolas Pitre [Wed, 12 Oct 2005 18:51:24 +0000 (19:51 +0100)]
[ARM] 2974/1: fix ARM710 swi bug workaround

Patch from Nicolas Pitre

Either no one is using an ARM710 with recent kernels, or all ARM710s
still in use are not afflicted by this swi bug.  Nevertheless, the code
to work around the ARM710 swi bug is itself currently buggy since it
uses r8 as a pointer to S_PC while in fact it holds the spsr content
these days. Fix that, and simplify the code as well.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[PATCH] ppc32: Tell userland about lack of standard TB
Benjamin Herrenschmidt [Wed, 12 Oct 2005 04:22:50 +0000 (14:22 +1000)]
[PATCH] ppc32: Tell userland about lack of standard TB

Glibc is about to get some new high precision timer stuff that relies on
the standard timebase of the PPC architecture.

However, some (rare & old) CPUs do not have such timebase and it is a
bit annoying to have your stuff just crash because you are running on
the wrong CPU...

This exposes to userland a CPU feature bit that tells that the current
processor doesn't have a standard timebase.  It's negative logic so that
glibc will still "just work" on older kernels (it will just be unhappy
on those old CPUs but that doesn't really matter as distro tend to
update glibc & kernel at the same time).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc32: Fix timekeeping
Benjamin Herrenschmidt [Wed, 12 Oct 2005 01:39:33 +0000 (11:39 +1000)]
[PATCH] ppc32: Fix timekeeping

Interestingly enough, ppc32 had broken timekeeping for ages...  It
worked, but probably drifted a bit more than could be explained by the
actual bad precision of the timebase calibration.  We discovered that
recently when somebody figured out that the common code was using
CLOCK_TICK_RATE to correct the timekeeing, and ppc32 had a completely
bogus value for it.

This patch turns it into something saner.  Probably not as good as doing
something based on the actual timebase frequency precision but I'll
leave that sort of math to others.  This at least makes it better for
the common HZ values.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] uml: compile-time fix recent patch
Paolo 'Blaisorblade' Giarrusso [Tue, 11 Oct 2005 19:01:01 +0000 (21:01 +0200)]
[PATCH] uml: compile-time fix recent patch

Give an empty definition for clear_can_do_skas() when it is not needed.
Thanks to Junichi Uekawa <dancer@netfort.gr.jp> for reporting the
breakage and providing a fix (I re-fixed it in an IMHO cleaner way).

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] uml: revert block driver use of host AIO
Jeff Dike [Tue, 11 Oct 2005 03:10:32 +0000 (23:10 -0400)]
[PATCH] uml: revert block driver use of host AIO

The patch to use host AIO support that I submitted early after 2.6.13 exposed
some problems in the block driver.  I have fixes for these, but am not
comfortable putting them into 2.6.14 at this late date.  So, this patch reverts
the use of host AIO.

I will resubmit the original patch, plus fixes to the driver after 2.6.14
in order to get a reasonable amount of testing before they're exposed to
the general public.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Tue, 11 Oct 2005 23:39:24 +0000 (16:39 -0700)]
Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6

19 years ago[SPARC64]: Fix net booting on Ultra5
David S. Miller [Tue, 11 Oct 2005 22:45:16 +0000 (15:45 -0700)]
[SPARC64]: Fix net booting on Ultra5

We were not doing alignment properly when remapping the kernel image.

What we want is a 4MB aligned physical address to map at KERNBASE.
Mistakedly we were 4MB aligning the virtual address where the kernel
initially sits, that's wrong.

Instead, we should PAGE align the virtual address, then 4MB align the
physical address result the prom gives to us.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years agoPull mbcs-init-sn-check into release branch
Tony Luck [Tue, 11 Oct 2005 22:08:48 +0000 (15:08 -0700)]
Pull mbcs-init-sn-check into release branch

19 years ago[PATCH] Don't map the same page too much
Hugh Dickins [Tue, 11 Oct 2005 18:16:26 +0000 (19:16 +0100)]
[PATCH] Don't map the same page too much

Refuse to install a page into a mapping if the mapping count is already
ridiculously large.

You probably cannot trigger this on 32-bit architectures, but on a
64-bit setup we should protect against it.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc64: Add R_PPC64_TOC16 module reloc
Peter Bergner [Tue, 11 Oct 2005 16:28:24 +0000 (09:28 -0700)]
[PATCH] ppc64: Add R_PPC64_TOC16 module reloc

Newer gcc's are generating this relocation, so the module loader needs to
handle it.

Signed-off-by: Peter Bergner <bergner@vnet.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] V4L: Enable s-video input on DViCO FusionHDTV5 Lite
Michael Krufky [Tue, 11 Oct 2005 16:28:24 +0000 (09:28 -0700)]
[PATCH] V4L: Enable s-video input on DViCO FusionHDTV5 Lite

* bttv-cards.c:
- Enable S-Video input on DViCO FusionHDTV5 Lite

Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] m32r: trap handler code for illegal traps
Hirokazu Takata [Tue, 11 Oct 2005 15:29:09 +0000 (08:29 -0700)]
[PATCH] m32r: trap handler code for illegal traps

This patch prevents illegal traps from causing m32r kernel's infinite loop
execution.

Signed-off-by: Naoto Sugai <sugai@isl.melco.co.jp>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] binfmt_elf bss padding fix
akpm@osdl.org [Tue, 11 Oct 2005 15:29:08 +0000 (08:29 -0700)]
[PATCH] binfmt_elf bss padding fix

Nir Tzachar <tzachar@cs.bgu.ac.il> points out that if an ELF file specifies a
zero-length bss at a whacky address, we cannot load that binary because
padzero() tries to zero out the end of the page at the whacky address, and
that may not be writeable.

See also http://bugzilla.kernel.org/show_bug.cgi?id=5411

So teach load_elf_binary() to skip the bss settng altogether if the elf file
has a zero-length bss segment.

Cc: Roland McGrath <roland@redhat.com>
Cc: Daniel Jacobowitz <dan@debian.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc highmem fix
Paolo Galtieri [Tue, 11 Oct 2005 15:29:07 +0000 (08:29 -0700)]
[PATCH] ppc highmem fix

I've noticed that the calculations for seg_size and nr_segs in
__dma_sync_page_highmem() (arch/ppc/kernel/dma-mapping.c) are wrong.  The
incorrect calculations can result in either an oops or a panic when running
fsck depending on the size of the partition.

The problem with the seg_size calculation is that it can result in a
negative number if size is offset > size.  The problem with the nr_segs
caculation is returns the wrong number of segments, e.g.  it returns 1 when
size is 200 and offset is 4095, when it should return 2 or more.

Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] madvise: Avoid returning error code -EBADF for anonymous mappings
Suzuki [Tue, 11 Oct 2005 15:29:06 +0000 (08:29 -0700)]
[PATCH] madvise: Avoid returning error code -EBADF for anonymous mappings

Revert this recent correctness change: Douglas Crosher <dcrosher@scieneer.com>
reported that it broke an existing application, and that madvise() works
without error on anonymous mappings on Solaris.

This means that madvise() will remain non-standards-compliant: we should
return -EBADF for all requests against non-file-backed vma's, but Linux only
does this for MADV_WILLNEED requests.

Signed-off-by: Suzuki K P <suzuki@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] nfsacl: Solaris VxFS compatibility fix
Andreas Gruenbacher [Tue, 11 Oct 2005 15:29:05 +0000 (08:29 -0700)]
[PATCH] nfsacl: Solaris VxFS compatibility fix

Here is a compatibility fix between Linux and Solaris when used with VxFS
filesystems: Solaris usually accepts acl entries in any order, but with
VxFS it replies with NFSERR_INVAL when it sees a four-entry acl that is not
in canonical form.  It may also fail with other non-canonical acls -- I
can't tell, because that case never triggers: We only send non-canonical
acls when we fake up an ACL_MASK entry.

Instead of adding fake ACL_MASK entries at the end, inserting them in the
correct position makes Solaris+VxFS happy.  The Linux client and server
sides don't care about entry order.  The three-entry-acl special case in
which we need a fake ACL_MASK entry was handled in xdr_nfsace_encode.  The
patch moves this into nfsacl_encode.

Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Acked-by: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] v9fs: remove additional buffer allocation from v9fs_file_read and v9fs_file_write
Latchesar Ionkov [Tue, 11 Oct 2005 15:29:03 +0000 (08:29 -0700)]
[PATCH] v9fs: remove additional buffer allocation from v9fs_file_read and v9fs_file_write

v9fs_file_read and v9fs_file_write use kmalloc to allocate buffers as big
as the data buffer received as parameter.  kmalloc cannot be used to
allocate buffers bigger than 128K, so reading/writing data in chunks bigger
than 128k fails.

This patch reorganizes v9fs_file_read and v9fs_file_write to allocate only
buffers as big as the maximum data that can be sent in one 9P message.

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] dell_rbu: changes in packet update mechanism
Abhay Salunke [Tue, 11 Oct 2005 15:29:02 +0000 (08:29 -0700)]
[PATCH] dell_rbu: changes in packet update mechanism

In the current dell_rbu code ver 2.0 the packet update mechanism makes the
user app dump every individual packet in to the driver.

This adds in efficiency as every packet update makes the
/sys/class/firmware/dell_rbu/loading and data files to disappear and reappear
again.  Thus the user app needs to wait for the files to reappear to dump
another packet.  This slows down the packet update tremendously in case of
large number of packets.  I am submitting a new patch for dell_rbu which will
change the way we do packet updates;

In the new method the user app will create a new single file which has already
packetized the rbu image and all the packets are now staged in this file.

This driver also creates a new entry in
/sys/devices/platform/dell_rbu/packet_size ; the user needs to echo the packet
size here before downloading the packet file.

The user should do the following:

 create one single file which has all the packets stacked together.
 echo the packet size in to /sys/devices/platform/dell_rbu/packet_size.
 echo 1 > /sys/class/firmware/dell_rbu/loading
 cat the packetfile > /sys/class/firmware/dell_rbu/data
 echo 0 > /sys/class/firmware/dell_rbu/loading

The driver takes the file which came through /sys/class/firmware/dell_rbu/data
and takes chunks of paket_size data from it and place in contiguous memory.

This makes packet update process very efficient and fast.  As all the packet
update happens in one single operation.  The user can still read back the
downloaded file from /sys/devices/platform/dell_rbu/data.

Signed-off-by: Abhay Salunke <abhay_salunke@dell.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc64: Fix PCI hotplug
Anton Blanchard [Tue, 11 Oct 2005 15:29:00 +0000 (08:29 -0700)]
[PATCH] ppc64: Fix PCI hotplug

pSeries_irq_bus_setup is marked __devinit but references s7a_workaround
which is marked __initdata.

Depending on who got the memory for s7a_workaround (and if the value was
now positive), it was possible for PCI hotplugged devices to have 3
subtracted from their interrupt number.  This would happen randomly and
caused me much confusion :)

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] s390: ccw device reconnect oops.
Cornelia Huck [Tue, 11 Oct 2005 15:28:59 +0000 (08:28 -0700)]
[PATCH] s390: ccw device reconnect oops.

Search for a disconnect ccw_device on the ccw bus rather than on the css
bus (was a typo in patch I did for the klist conversion).  A cast to an
embedding ccw_device from an embedded device in a struct subchannel will
lead us to oopses.

Signed-off-by: Cornelia Huck <cohuck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years agosata_nv: Fixed bug introduced by 0.08's MCP51 and MCP55 support.
Jeff Garzik [Tue, 11 Oct 2005 05:52:39 +0000 (01:52 -0400)]
sata_nv: Fixed bug introduced by 0.08's MCP51 and MCP55 support.

19 years agoe100: revert CPU cycle saver microcode, it causes severe problems
Jeff Garzik [Tue, 11 Oct 2005 05:38:35 +0000 (01:38 -0400)]
e100: revert CPU cycle saver microcode, it causes severe problems
for certain NICs

Reverting 685fac63f5ca6c5ca06bab641e1a32bbf9287e89:
> [PATCH] e100: CPU cycle saver microcode
>
>
> Add cpu cycle saver microcode to 8086:{1209/1229} other than ICH devices.
>
> Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
> Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
> Signed-off-by: John Ronciak <john.ronciak@intel.com>
> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

19 years ago[TWSK]: Grab the module refcount for timewait sockets
Arnaldo Carvalho de Melo [Tue, 11 Oct 2005 04:25:23 +0000 (21:25 -0700)]
[TWSK]: Grab the module refcount for timewait sockets

This is required to avoid unloading a module that has active timewait
sockets, such as DCCP.

Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[DCCP]: Transition from PARTOPEN to OPEN when receiving DATA packets
Arnaldo Carvalho de Melo [Tue, 11 Oct 2005 04:25:00 +0000 (21:25 -0700)]
[DCCP]: Transition from PARTOPEN to OPEN when receiving DATA packets

Noticed by Andrea Bittau, that provided a patch that was modified to
not transition from RESPOND to OPEN when receiving DATA packets.

Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[CCID]: Check if ccid is NULL in the hc_[tr]x_exit functions
Arnaldo Carvalho de Melo [Tue, 11 Oct 2005 04:24:20 +0000 (21:24 -0700)]
[CCID]: Check if ccid is NULL in the hc_[tr]x_exit functions

For consistency with ccid_exit and to fix a bug when
IP_DCCP_UNLOAD_HACK is enabled as the control sock is not associated
to any CCID.

Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[NETFILTER] ctnetlink: add support to change protocol info
Pablo Neira Ayuso [Tue, 11 Oct 2005 04:23:46 +0000 (21:23 -0700)]
[NETFILTER] ctnetlink: add support to change protocol info

This patch add support to change the state of the private protocol
information via conntrack_netlink.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[NETFILTER] ctnetlink: allow userspace to change TCP state
Pablo Neira Ayuso [Tue, 11 Oct 2005 04:23:28 +0000 (21:23 -0700)]
[NETFILTER] ctnetlink: allow userspace to change TCP state

This patch adds the ability of changing the state a TCP connection. I know
that this must be used with care but it's required to provide a complete
conntrack creation via conntrack_netlink. So I'll document this aspect on
the upcoming docs.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[NETFILTER]: Use only 32bit counters for CONNTRACK_ACCT
Harald Welte [Tue, 11 Oct 2005 04:21:10 +0000 (21:21 -0700)]
[NETFILTER]: Use only 32bit counters for CONNTRACK_ACCT

Initially we used 64bit counters for conntrack-based accounting, since we
had no event mechanism to tell userspace that our counters are about to
overflow.  With nfnetlink_conntrack, we now have such a event mechanism and
thus can save 16bytes per connection.

Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[IPSEC] Fix block size/MTU bugs in ESP
Herbert Xu [Tue, 11 Oct 2005 04:11:34 +0000 (21:11 -0700)]
[IPSEC] Fix block size/MTU bugs in ESP

This patch fixes the following bugs in ESP:

* Fix transport mode MTU overestimate.  This means that the inner MTU
  is smaller than it needs be.  Worse yet, given an input MTU which
  is a multiple of 4 it will always produce an estimate which is not
  a multiple of 4.

  For example, given a standard ESP/3DES/MD5 transform and an MTU of
  1500, the resulting MTU for transport mode is 1462 when it should
  be 1464.

  The reason for this is because IP header lengths are always a multiple
  of 4 for IPv4 and 8 for IPv6.

* Ensure that the block size is at least 4.  This is required by RFC2406
  and corresponds to what the esp_output function does.  At the moment
  this only affects crypto_null as its block size is 1.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[IPSEC]: Use ALIGN macro in ESP
Herbert Xu [Tue, 11 Oct 2005 04:11:08 +0000 (21:11 -0700)]
[IPSEC]: Use ALIGN macro in ESP

This patch uses the macro ALIGN in all the applicable spots for ESP.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[SPARC32]: Revert IOMAP change eb98129eec7fa605f0407dfd92d40ee8ddf5cd9a
David S. Miller [Tue, 11 Oct 2005 04:02:26 +0000 (21:02 -0700)]
[SPARC32]: Revert IOMAP change eb98129eec7fa605f0407dfd92d40ee8ddf5cd9a

Breakage noted by Al Viro.

It breaks non-PCI builds, it's probably better to have a more
direct implementation on sparc32, and which driver actually
needs this is still questionable.

We can resolve this in 2.6.15

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[NETFILTER] ctnetlink: add one nesting level for TCP state
Pablo Neira Ayuso [Tue, 11 Oct 2005 03:55:49 +0000 (20:55 -0700)]
[NETFILTER] ctnetlink: add one nesting level for TCP state

To keep consistency, the TCP private protocol information is nested
attributes under CTA_PROTOINFO_TCP. This way the sequence of attributes to
access the TCP state information looks like here below:

CTA_PROTOINFO
CTA_PROTOINFO_TCP
CTA_PROTOINFO_TCP_STATE

instead of:

CTA_PROTOINFO
CTA_PROTOINFO_TCP_STATE

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[NETFILTER]: Add missing include to ip_conntrack_tuple.h
Harald Welte [Tue, 11 Oct 2005 03:54:01 +0000 (20:54 -0700)]
[NETFILTER]: Add missing include to ip_conntrack_tuple.h

Without this #include, __be16 is not defined and userspace programs
will break.

Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[NETFILTER] ctnetlink: ICMP ID is not mandatory
Pablo Neira Ayuso [Tue, 11 Oct 2005 03:53:16 +0000 (20:53 -0700)]
[NETFILTER] ctnetlink: ICMP ID is not mandatory

The ID is only required by ICMP type 8 (echo), so it's not
mandatory for all sort of ICMP connections. This patch makes
mandatory only the type and the code for ICMP netlink messages.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[NETFILTER] conntrack_netlink: Fix endian issue with status from userspace
Harald Welte [Tue, 11 Oct 2005 03:52:51 +0000 (20:52 -0700)]
[NETFILTER] conntrack_netlink: Fix endian issue with status from userspace

When we send "status" from userspace, we forget to convert the endianness.
This patch adds the reqired conversion.  Thanks to Pablo Neira for
discovering this.

Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[NETFILTER] nat: remove bogus structure member
Harald Welte [Tue, 11 Oct 2005 03:52:36 +0000 (20:52 -0700)]
[NETFILTER] nat: remove bogus structure member

When 'rustynat' was merged in 2.6.12, the use of the "helper" pointer of
struct ipt_nat_info was obsoleted, but the pointer not removed from the
struct.

This patch removes the pointer, thereby yet again shrinking struct
ip_conntrack.

Discovered-by: Rusty Russell <rusty@netfilter.org>
Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>