Sinan Kaya [Sat, 5 Jan 2019 10:05:56 +0000 (10:05 +0000)]
ACPI / LPSS: Make PCI dependency explicit
After commit 5d32a66541c4 (PCI/ACPI: Allow ACPI to be built without
CONFIG_PCI set), it is possible to build ACPI without any PCI support.
This code depends on PCI. Compile only when PCI is present.
Fixes: 5d32a66541c46 ("PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set") Signed-off-by: Sinan Kaya <okaya@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
kernel/sys.c: Clarify that UNAME26 does not generate unique versions anymore
UNAME26 is a mechanism to report Linux's version as 2.6.x, for
compatibility with old/broken software. Due to the way it is
implemented, it would have to be updated after 5.0, to keep the
resulting versions unique. Linus Torvalds argued:
"Do we actually need this?
I'd rather let it bitrot, and just let it return random versions. It
will just start again at 2.4.60, won't it?
Anybody who uses UNAME26 for a 5.x kernel might as well think it's
still 4.x. The user space is so old that it can't possibly care about
differences between 4.x and 5.x, can it?
The only thing that matters is that it shows "2.4.<largeenough>",
which it will do regardless"
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 13 Jan 2019 22:34:14 +0000 (10:34 +1200)]
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A bigger batch than I anticipated this week, for two reasons:
- Some fallout on Davinci from board file -> DTB conversion, that
also includes a few longer-standing fixes (i.e. not recent
regressions).
- drivers/reset material that has been in linux-next for a while, but
didn't get sent to us until now for a variety of reasons
(maintainer out sick, holidays, etc). There's a functional
dependency in there such that one platform (Altera's SoCFPGA) won't
boot without one of the patches; instead of reverting the patch
that got merged, I looked at this set and decided it was small
enough that I'll pick it up anyway. If you disagree I can revisit
with a smaller set.
That being said, there's also a handful of the usual stuff:
- Fix for a crash on Armada 7K/8K when the kernel touches
PSCI-reserved memory
- Fix for PCIe reset on Macchiatobin (Armada 8K development board,
what this email is sent from in fact :)
- Enable a few new-merged modules for Amlogic in arm64 defconfig
- Error path fixes on Integrator
- Build fix for Renesas and Qualcomm
- Initialization fix for Renesas RZ/G2E
.. plus a few more fixlets"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits)
ARM: integrator: impd1: use struct_size() in devm_kzalloc()
qcom-scm: Include <linux/err.h> header
gpio: pl061: handle failed allocations
ARM: dts: kirkwood: Fix polarity of GPIO fan lines
arm64: dts: marvell: mcbin: fix PCIe reset signal
arm64: dts: marvell: armada-ap806: reserve PSCI area
ARM: dts: da850-lcdk: Correct the sound card name
ARM: dts: da850-lcdk: Correct the audio codec regulators
ARM: dts: da850-evm: Correct the sound card name
ARM: dts: da850-evm: Correct the audio codec regulators
ARM: davinci: omapl138-hawk: fix label names in GPIO lookup entries
ARM: davinci: dm644x-evm: fix label names in GPIO lookup entries
ARM: davinci: dm355-evm: fix label names in GPIO lookup entries
ARM: davinci: da850-evm: fix label names in GPIO lookup entries
ARM: davinci: da830-evm: fix label names in GPIO lookup entries
arm64: defconfig: enable modules for amlogic s400 sound card
reset: uniphier-glue: Add AHCI reset control support in glue layer
dt-bindings: reset: uniphier: Add AHCI core reset description
reset: uniphier-usb3: Rename to reset-uniphier-glue
dt-bindings: reset: uniphier: Replace the expression of USB3 with generic peripherals
...
Linus Torvalds [Sun, 13 Jan 2019 17:55:51 +0000 (05:55 +1200)]
Merge tag 'for-5.0-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- two regression fixes in clone/dedupe ioctls, the generic check
callback needs to lock extents properly and wait for io to avoid
problems with writeback and relocation
- fix deadlock when using free space tree due to block group creation
- a recently added check refuses a valid fileystem with seeding device,
make that work again with a quickfix, proper solution needs more
intrusive changes
* tag 'for-5.0-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: Use real device structure to verify dev extent
Btrfs: fix deadlock when using free space tree due to block group creation
Btrfs: fix race between reflink/dedupe and relocation
Btrfs: fix race between cloning range ending at eof and writeback
Linus Torvalds [Sun, 13 Jan 2019 17:51:08 +0000 (05:51 +1200)]
Merge tag 'driver-core-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here is one small sysfs change, and a documentation update for 5.0-rc2
The sysfs change moves from using BUG_ON to WARN_ON, as discussed in
an email thread on lkml while trying to track down another driver bug.
sysfs should not be crashing and preventing people from seeing where
they went wrong. Now it properly recovers and warns the developer.
The documentation update removes the use of BUS_ATTR() as the kernel
is moving away from this to use the specific BUS_ATTR_RW() and friends
instead. There are pending patches in all of the different subsystems
to remove the last users of this macro, but for now, don't advertise
it should be used anymore to keep new ones from being introduced.
Both have been in linux-next with no reported issues"
* tag 'driver-core-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Documentation: driver core: remove use of BUS_ATTR
sysfs: convert BUG_ON to WARN_ON
Linus Torvalds [Sun, 13 Jan 2019 17:49:35 +0000 (05:49 +1200)]
Merge tag 'staging-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes for some reported issues.
One reverts a patch that was made to the rtl8723bs driver that turned
out to not be needed at all as it was a bug in clang. The others fix
up some reported issues in the rtl8188eu driver and update the
MAINTAINERS file to point to Larry for this driver so he can get the
bug reports easier.
All have been in linux-next with no reported issues"
* tag 'staging-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
Revert "staging: rtl8723bs: Mark ACPI table declaration as used"
staging: rtl8188eu: Fix module loading from tasklet for WEP encryption
staging: rtl8188eu: Fix module loading from tasklet for CCMP encryption
MAINTAINERS: Add entry for staging driver r8188eu
Linus Torvalds [Sun, 13 Jan 2019 17:47:48 +0000 (05:47 +1200)]
Merge tag 'tty-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are 2 tty and serial fixes for 5.0-rc2 that resolve some reported
issues.
The first is a simple serial driver fix for a regression that showed
up in 5.0-rc1. The second one resolves a number of reported issues
with the recent tty locking fixes that went into 5.0-rc1. Lots of
people have tested the second one and say it resolves their issues.
Both have been in linux-next with no reported issues"
* tag 'tty-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: Don't hold ldisc lock in tty_reopen() if ldisc present
serial: lantiq: Do not swap register read/writes
Linus Torvalds [Sun, 13 Jan 2019 17:45:28 +0000 (05:45 +1200)]
Merge tag 'usb-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes and quirk updates for 5.0-rc2.
The majority here are some quirks for some storage devices to get them
to work properly. There's also a fix here to resolve the reported
issues with some audio devices that say they are UAC3 compliant, but
really are not.
And a fix up for the MAINTAINERS file to remove a dead url.
All have been in linux-next with no reported issues"
* tag 'usb-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: storage: Remove outdated URL from MAINTAINERS
USB: Add USB_QUIRK_DELAY_CTRL_MSG quirk for Corsair K70 RGB
usbcore: Select only first configuration for non-UAC3 compliant devices
USB: storage: add quirk for SMI SM3350
USB: storage: don't insert sane sense for SPC3+ when bad sense specified
usb: cdc-acm: send ZLP for Telit 3G Intel based modems
Linus Torvalds [Sun, 13 Jan 2019 17:43:40 +0000 (05:43 +1200)]
Merge tag '5.0-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"A set of cifs/smb3 fixes, 4 for stable, most from Pavel. His patches
fix an important set of crediting (flow control) problems, and also
two problems in cifs_writepages, ddressing some large i/o and also
compounding issues"
* tag '5.0-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module version number
CIFS: Fix error paths in writeback code
CIFS: Move credit processing to mid callbacks for SMB3
CIFS: Fix credits calculation for cancelled requests
cifs: Fix potential OOB access of lock element array
cifs: Limit memory used by lock request calls to a page
cifs: move large array from stack to heap
CIFS: Do not hide EINTR after sending network packets
CIFS: Fix credit computation for compounded requests
CIFS: Do not set credits to 1 if the server didn't grant anything
CIFS: Fix adjustment of credits for MTU requests
cifs: Fix a tiny potential memory leak
cifs: Fix a debug message
Olof Johansson [Sun, 13 Jan 2019 06:06:54 +0000 (22:06 -0800)]
Merge tag 'reset-for-5.0-rc2' of git://git.pengutronix.de/git/pza/linux into fixes
Late reset controller changes for v5.0
This adds missing deassert functionality to the ARC HSDK reset driver,
fixes some indentation and grammar issues in the kernel docs, adds a
helper to count the number of resets on a device for the non-DT case
as well, adds an early reset driver for SoCFPGA and simple reset driver
support for Stratix10, and generalizes the uniphier USB3 glue layer
reset to also cover AHCI.
* tag 'reset-for-5.0-rc2' of git://git.pengutronix.de/git/pza/linux:
reset: uniphier-glue: Add AHCI reset control support in glue layer
dt-bindings: reset: uniphier: Add AHCI core reset description
reset: uniphier-usb3: Rename to reset-uniphier-glue
dt-bindings: reset: uniphier: Replace the expression of USB3 with generic peripherals
ARM: socfpga: dts: document "altr,stratix10-rst-mgr" binding
reset: socfpga: add an early reset driver for SoCFPGA
reset: fix null pointer dereference on dev by dev_name
reset: Add reset_control_get_count()
reset: Improve reset controller kernel docs
ARC: HSDK: improve reset driver
Olof Johansson [Sun, 13 Jan 2019 06:03:59 +0000 (22:03 -0800)]
Merge tag 'mvebu-fixes-5.0-1' of git://git.infradead.org/linux-mvebu into fixes
mvebu fixes for 5.0
They are all device tree fixes which also worth being in stable:
- Reserve PSCI area on Armada 7K/8K preventing the kernel accessing
this area and crashing while doing it.
- Use correct PCIe reset signal on MACCHIATOBin (Armada 8040 based)
- Fix polarity of GPIO fan line D-Link DNS NASes(kikwood based)
* tag 'mvebu-fixes-5.0-1' of git://git.infradead.org/linux-mvebu:
ARM: dts: kirkwood: Fix polarity of GPIO fan lines
arm64: dts: marvell: mcbin: fix PCIe reset signal
arm64: dts: marvell: armada-ap806: reserve PSCI area
Olof Johansson [Sun, 13 Jan 2019 06:03:18 +0000 (22:03 -0800)]
Merge tag 'integrator-fixes-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into fixes
Fixes for the Integrator:
- Handle failed allocations in the IM/PC bus attachment.
- Use struct_size() for allocation.
* tag 'integrator-fixes-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: integrator: impd1: use struct_size() in devm_kzalloc()
gpio: pl061: handle failed allocations
Olof Johansson [Sun, 13 Jan 2019 06:02:28 +0000 (22:02 -0800)]
Merge tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into fixes
Amlogic DT fixes for v5.0-rc
- arm64: defconfig: enable modules for amlogic s400 sound card
* tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: defconfig: enable modules for amlogic s400 sound card
Olof Johansson [Sun, 13 Jan 2019 06:00:36 +0000 (22:00 -0800)]
Merge tag 'davinci-fixes-for-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes
This pull request fixes some more regressions on legacy
DaVinci board support due to GPIO driver clean-up introduced
in v4.20 kernel. These are marked for stable.
Also has fixes for some long standing Audio issues on DA850
boards.
* tag 'davinci-fixes-for-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: dts: da850-lcdk: Correct the sound card name
ARM: dts: da850-lcdk: Correct the audio codec regulators
ARM: dts: da850-evm: Correct the sound card name
ARM: dts: da850-evm: Correct the audio codec regulators
ARM: davinci: omapl138-hawk: fix label names in GPIO lookup entries
ARM: davinci: dm644x-evm: fix label names in GPIO lookup entries
ARM: davinci: dm355-evm: fix label names in GPIO lookup entries
ARM: davinci: da850-evm: fix label names in GPIO lookup entries
ARM: davinci: da830-evm: fix label names in GPIO lookup entries
Olof Johansson [Sun, 13 Jan 2019 05:59:42 +0000 (21:59 -0800)]
Merge tag 'renesas-fixes-for-v5.0' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes
Renesas ARM Based SoC Fixes for v5.0
Renesas SoCs:
* Fix build regressions caused by move of Kconfig symbols
RZ/G2E (r8a774c0) SoC:
* Correct initialization order of 3DG-{A,B} in SYSC driver
* tag 'renesas-fixes-for-v5.0' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
soc: renesas: r8a774c0-sysc: Fix initialization order of 3DG-{A,B}
ARM: shmobile: fix build regressions
John Hubbard [Sun, 13 Jan 2019 01:29:09 +0000 (17:29 -0800)]
phy: fix build breakage: add PHY_MODE_SATA
Commit 49e54187ae0b ("ata: libahci_platform: comply to PHY framework") uses
the PHY_MODE_SATA, but that enum had not yet been added. This caused a
build failure for me, with today's linux.git.
Also, there is a potentially conflicting (mis-named) PHY_MODE_SATA, hiding
in the Marvell Berlin SATA PHY driver.
Fix the build by:
1) Renaming Marvell's defined value to a more scoped name,
in order to avoid any potential conflicts: PHY_BERLIN_MODE_SATA.
2) Adding the missing enum, which was going to be added anyway as part
of [1].
- ahch mvebu suspend/resume support. Should have gone into the merge
window, but there was some confusion on which tree had it. (Miquel)
* tag 'for-linus-20190112' of git://git.kernel.dk/linux-block: (22 commits)
ata: ahci: mvebu: request PHY suspend/resume for Armada 3700
ata: ahci: mvebu: add Armada 3700 initialization needed for S2RAM
ata: ahci: mvebu: do Armada 38x configuration only on relevant SoCs
ata: ahci: mvebu: remove stale comment
ata: libahci_platform: comply to PHY framework
loop: drop caches if offset or block_size are changed
block: fix kerneldoc comment for blk_attempt_plug_merge()
nvme: don't initlialize ctrl->cntlid twice
nvme: introduce NVME_QUIRK_IGNORE_DEV_SUBNQN
nvme: pad fake subsys NQN vid and ssvid with zeros
nvme-multipath: zero out ANA log buffer
nvme-fabrics: unset write/poll queues for discovery controllers
nvme-tcp: don't ask if controller is fabrics
nvme-tcp: remove dead code
nvme-pci: fix out of bounds access in nvme_cqe_pending
nvme-pci: rerun irq setup on IO queue init errors
nvme-pci: use the same attributes when freeing host_mem_desc_bufs.
nvme-pci: fix the wrong setting of nr_maps
block: doc: add slice_idle_us to bfq documentation
block: clarify documentation for blk_{start|finish}_plug
...
Linus Torvalds [Sat, 12 Jan 2019 18:52:40 +0000 (10:52 -0800)]
Merge tag 'remove-dma_zalloc_coherent-5.0' of git://git.infradead.org/users/hch/dma-mapping
Pull dma_zalloc_coherent() removal from Christoph Hellwig:
"We've always had a weird situation around dma_zalloc_coherent. To
safely support mapping the allocations to userspace major
architectures like x86 and arm have always zeroed allocations from
dma_alloc_coherent, but a couple other architectures were missing that
zeroing either always or in corner cases.
Then later we grew anothe dma_zalloc_coherent interface to explicitly
request zeroing, but that just added __GFP_ZERO to the allocation
flags, which for some allocators that didn't end up using the page
allocator ended up being a no-op and still not zeroing the
allocations.
So for this merge window I fixed up all remaining architectures to
zero the memory in dma_alloc_coherent, and made dma_zalloc_coherent a
no-op wrapper around dma_alloc_coherent, which fixes all of the above
issues.
dma_zalloc_coherent is now pointless and can go away, and Luis helped
me writing a cocchinelle script and patch series to kill it, which I
think we should apply now just after -rc1 to finally settle these
issue"
* tag 'remove-dma_zalloc_coherent-5.0' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: remove dma_zalloc_coherent()
cross-tree: phase out dma_zalloc_coherent() on headers
cross-tree: phase out dma_zalloc_coherent()
Linus Torvalds [Sat, 12 Jan 2019 18:39:43 +0000 (10:39 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"Minor fixes for new code, corner cases, and documentation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86/kvm/nVMX: don't skip emulated instruction twice when vmptr address is not backed
Documentation/virtual/kvm: Update URL for AMD SEV API specification
KVM/VMX: Avoid return error when flush tlb successfully in the hv_remote_flush_tlb_with_range()
kvm: sev: Fail KVM_SEV_INIT if already initialized
KVM: validate userspace input in kvm_clear_dirty_log_protect()
KVM: x86: Fix bit shifting in update_intel_pt_cfg
Linus Torvalds [Sat, 12 Jan 2019 18:30:43 +0000 (10:30 -0800)]
Merge tag 'drm-fixes-2019-01-11-1' of git://anongit.freedesktop.org/drm/drm
Pull more drm fixes from Daniel Vetter:
"Dave sends out his pull, everybody remembers holidays are over :-)
Since Dave's already in weekend mode and it was quite a few patches I
figured better to apply all the pulls and forward them to you. Hence
here 2nd part of bugfixes for -rc2.
i915:
- Disable PSR for Apple panels
- Broxton ERR_PTR error state fix
- Kabylake VECS workaround fix
- Unwind failure on pinning the gen7 ppgtt
- GVT workload request allocation fix
core:
- Fix fb-helper to work correctly with SDL 1.2 bugs
- Fix lockdep warning in the atomic ioctl and setproperty"
* tag 'drm-fixes-2019-01-11-1' of git://anongit.freedesktop.org/drm/drm:
drm/nouveau/falcon: avoid touching registers if engine is off
drm/nouveau: Don't disable polling in fallback mode
drm/nouveau: register backlight on pascal and newer
drm: Fix documentation generation for DP_DPCD_QUIRK_NO_PSR
drm/i915: init per-engine WAs for all engines
drm/i915: Unwind failure on pinning the gen7 ppgtt
drm/i915: Skip the ERR_PTR error state
drm/i915: Disable PSR in Apple panels
gpu/drm: Fix lock held when returning to user space.
drm/fb-helper: Ignore the value of fb_var_screeninfo.pixclock
drm/fb-helper: Partially bring back workaround for bugs of SDL 1.2
drm/i915/gvt: Fix workload request allocation before request add
Miquel Raynal [Tue, 4 Dec 2018 19:28:29 +0000 (20:28 +0100)]
ata: ahci: mvebu: request PHY suspend/resume for Armada 3700
A feature has been added in the libahci driver: the possibility to set
a new flag in hpriv->flags to let the core handle PHY suspend/resume
automatically. Make use of this feature to make suspend to RAM work
with SATA drives on A3700.
Miquel Raynal [Tue, 4 Dec 2018 19:28:28 +0000 (20:28 +0100)]
ata: ahci: mvebu: add Armada 3700 initialization needed for S2RAM
A3700 comphy initialization is done in the firmware (TF-A). Looking at
the SATA PHY initialization routine, there is a comment about "vendor
specific" registers. Two registers are mentioned. They are not
initialized there in the firmware because they are AHCI related, while
the firmware at this location does only PHY configuration. The
solution to avoid doing such initialization is relying on U-Boot.
While this work at boot time, U-Boot is definitely not going to run
during a resume after suspending to RAM.
Two possible solutions were considered:
* Fixing the firmware.
* Fixing the kernel driver.
The first solution would take ages to propagate, while the second
solution is easy to implement as the driver as been a little bit
reworked to prepare for such platform configuration. Hence, this patch
adds an Armada 3700 configuration function to set these two registers
both at boot time (in the probe) and after a suspend (in the resume
path).
Miquel Raynal [Tue, 4 Dec 2018 19:28:27 +0000 (20:28 +0100)]
ata: ahci: mvebu: do Armada 38x configuration only on relevant SoCs
At the beginning, only Armada 38x SoCs where supported by the
ahci_mvebu.c driver. Commit 15d3ce7b63bd ("ata: ahci_mvebu: add
support for Armada 3700 variant") introduced Armada 3700 support. As
opposed to Armada 38x SoCs, the 3700 variants do not have to configure
mbus and the regret option. This patch took care of avoiding such
configuration when not needed in the probe function, but failed to do
the same in the resume path. While doing so looks harmless by
experience, let's clean the driver logic and avoid doing this useless
configuration with Armada 3700 SoCs.
Because the logic is very similar between these two places, it has
been decided to factorize this code and put it in a "Armada 38x
configuration function". This function is part of a new
(per-compatible) platform data structure, so that the addition of such
configuration function for Armada 3700 will be eased.
Fixes: 15d3ce7b63bd ("ata: ahci_mvebu: add support for Armada 3700 variant") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Miquel Raynal [Tue, 4 Dec 2018 19:28:26 +0000 (20:28 +0100)]
ata: ahci: mvebu: remove stale comment
For Armada-38x (32-bit) SoCs, PM platform support has been added since:
commit 32f9494c9dfd ("ARM: mvebu: prepare pm-board.c for the
introduction of Armada 38x support")
commit 3cbd6a6ca81c ("ARM: mvebu: Add standby support")
For Armada 64-bit SoCs, like the A3700 also using this AHCI driver, PM
platform support has always existed.
There are even suspend/resume hooks in this driver since:
commit d6ecf15814888 ("ata: ahci_mvebu: add suspend/resume support")
Remove the stale comment at the end of this driver stating that all
the above does not exist yet.
Miquel Raynal [Tue, 4 Dec 2018 19:28:25 +0000 (20:28 +0100)]
ata: libahci_platform: comply to PHY framework
Current implementation of the libahci does not take into account the
new PHY framework. Correct the situation by adding a call to
phy_set_mode() before phy_power_on().
PHYs should also be handled at suspend/resume time. For this, call
ahci_platform_enable/disable_phys() at suspend/resume_host() time. These
calls are guarded by a HFLAG (AHCI_HFLAG_SUSPEND_PHYS) that the user of
the libahci driver must set manually in hpriv->flags at probe time. This
is to avoid breaking users that have not been tested with this change.
Reviewed-by: Hans de Goede <hdegoede@redhat.com> Suggested-by: Grzegorz Jaszczyk <jaz@semihalf.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Fri, 11 Jan 2019 20:28:01 +0000 (12:28 -0800)]
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"I2C has one core and one driver bugfix for you"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: tegra: Fix Maximum transfer size
i2c: dev: prevent adapter retries and timeout being set as minus value
Linus Torvalds [Fri, 11 Jan 2019 20:25:40 +0000 (12:25 -0800)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Another handful of arm64 fixes here. Most of the complication comes
from improving our kpti code to avoid lengthy pauses (30+ seconds)
during boot when we rewrite the page tables. There are also a couple
of IORT fixes that came in via Lorenzo.
Summary:
- Don't error in kexec_file_load if kaslr-seed is missing in
device-tree
- Fix incorrect argument type passed to iort_match_node_callback()
- Fix IORT build failure when CONFIG_IOMMU_API=n
- Fix kpti performance regression with new rodata default option
- Typo fix"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: kexec_file: return successfully even if kaslr-seed doesn't exist
ACPI/IORT: Fix rc_dma_get_range()
arm64: kpti: Avoid rewriting early page tables when KASLR is enabled
arm64: asm-prototypes: Fix fat-fingered typo in comment
ACPI/IORT: Fix build when CONFIG_IOMMU_API=n
Linus Torvalds [Fri, 11 Jan 2019 20:17:30 +0000 (12:17 -0800)]
Merge tag 'ceph-for-5.0-rc2' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"A patch to allow setting abort_on_full and a fix for an old "rbd
unmap" edge case, marked for stable"
* tag 'ceph-for-5.0-rc2' of git://github.com/ceph/ceph-client:
rbd: don't return 0 on unmap if RBD_DEV_FLAG_REMOVING is set
ceph: use vmf_error() in ceph_filemap_fault()
libceph: allow setting abort_on_full for rbd
Linus Torvalds [Fri, 11 Jan 2019 17:44:05 +0000 (09:44 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf tooling updates from Ingo Molnar:
"Tooling changes only: fixes and a few stray improvements.
Most of the diffstat is dominated by a PowerPC related fix of system
call trace output beautification that allows us to (again) use the
UAPI header version and sync up with the kernel's version of PowerPC
system call names in the arch/powerpc/kernel/syscalls/syscall.tbl
header"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
tools headers powerpc: Remove unistd.h
perf powerpc: Rework syscall table generation
perf symbols: Add 'arch_cpu_idle' to the list of kernel idle symbols
tools include uapi: Sync linux/if_link.h copy with the kernel sources
tools include uapi: Sync linux/vhost.h with the kernel sources
tools include uapi: Sync linux/fs.h copy with the kernel sources
perf beauty: Switch from using uapi/linux/fs.h to uapi/linux/mount.h
tools include uapi: Grab a copy of linux/mount.h
perf top: Lift restriction on using callchains without "sym" in --sort
tools lib traceevent: Remove tep_data_event_from_type() API
tools lib traceevent: Rename tep_is_file_bigendian() to tep_file_bigendian()
tools lib traceevent: Changed return logic of tep_register_event_handler() API
tools lib traceevent: Changed return logic of trace_seq_printf() and trace_seq_vprintf() APIs
tools lib traceevent: Rename struct cmdline to struct tep_cmdline
tools lib traceevent: Initialize host_bigendian at tep_handle allocation
tools lib traceevent: Introduce new libtracevent API: tep_override_comm()
perf tests: Add a test for the ARM 32-bit [vectors] page
perf tools: Make find_vdso_map() more modular
perf trace: Fix alignment for [continued] lines
perf trace: Fix ')' placement in "interrupted" syscall lines
...
x86/kvm/nVMX: don't skip emulated instruction twice when vmptr address is not backed
Since commit 09abb5e3e5e50 ("KVM: nVMX: call kvm_skip_emulated_instruction
in nested_vmx_{fail,succeed}") nested_vmx_failValid() results in
kvm_skip_emulated_instruction() so doing it again in handle_vmptrld() when
vmptr address is not backed is wrong, we end up advancing RIP twice.
Fixes: fca91f6d60b6e ("kvm: nVMX: Set VM instruction error for VMPTRLD of unbacked page") Reported-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Lan Tianyu [Fri, 4 Jan 2019 07:20:44 +0000 (15:20 +0800)]
KVM/VMX: Avoid return error when flush tlb successfully in the hv_remote_flush_tlb_with_range()
The "ret" is initialized to be ENOTSUPP. The return value of
__hv_remote_flush_tlb_with_range() will be Or with "ret" when ept
table potiners are mismatched. This will cause return ENOTSUPP even if
flush tlb successfully. This patch is to fix the issue and set
"ret" to 0.
Fixes: a5c214dad198 ("KVM/VMX: Change hv flush logic when ept tables are mismatched.") Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Tomas Bortoli [Wed, 2 Jan 2019 17:29:37 +0000 (18:29 +0100)]
KVM: validate userspace input in kvm_clear_dirty_log_protect()
The function at issue does not fully validate the content of the
structure pointed by the log parameter, though its content has just been
copied from userspace and lacks validation. Fix that.
Moreover, change the type of n to unsigned long as that is the type
returned by kvm_dirty_bitmap_bytes().
Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com> Reported-by: syzbot+028366e52c9ace67deb3@syzkaller.appspotmail.com
[Squashed the fix from Paolo. - Radim.] Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
ctl_bitmask in pt_desc is of type u64. When an integer like 0xf is
being left shifted more than 32 bits, the behavior is undefined.
Fix this by adding suffix ULL to integer 0xf.
Addresses-Coverity-ID: 1476095 ("Bad bit shift operation") Fixes: 6c0f0bba85a0 ("KVM: x86: Introduce a function to initialize the PT configuration") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Luwei Kang <luwei.kang@intel.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Linus Torvalds [Fri, 11 Jan 2019 17:07:19 +0000 (09:07 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"A 32-bit build fix, CONFIG_RETPOLINE fixes and rename CONFIG_RESCTRL
to CONFIG_X86_RESCTRL"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, modpost: Replace last remnants of RETPOLINE with CONFIG_RETPOLINE
x86/cache: Rename config option to CONFIG_X86_RESCTRL
samples/seccomp: Fix 32-bit build
Linus Torvalds [Fri, 11 Jan 2019 17:04:36 +0000 (09:04 -0800)]
Merge tag 'acpi-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"Fix a build failure introduced recently, fix the xpower PMIC ACPI
driver, clean up the handling of duplicate entries in _PRx power
resource lists and fix addresses in NUMA-related messages on 32-bit
with PAE.
Specifics:
- Fix build failures with both CONFIG_NLS and CONFIG_PCI unset that
can occur since ACPI can be built without PCI now (Sinan Kaya).
- Clean up the handling of duplicate entries in power resource lists
returned by _PRx evaluation to avoid triggering WARN_ON() on
attempts to add duplicate symlinks in sysfs (Hans de Goede).
- Fix issues with the TS current-source switching on systems using
the xpower PMIC by avoiding to update unrelated bits in the TS
pin-ctrl register and avoiding to unconditionally enable TS
current-source on systems where it is not used (Hans de Goede).
- Fix addresses in NUMA-related messages on 32-bit with PAE which can
be truncated due to integer type conversions (Chao Fan)"
* tag 'acpi-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / PMIC: xpower: Fix TS-pin current-source handling
ACPI: NUMA: Use correct type for printing addresses on i386-PAE
ACPI: power: Skip duplicate power resource references in _PRx
ACPI: Fix build failure when CONFIG_NLS is set to 'n'
Linus Torvalds [Fri, 11 Jan 2019 17:01:43 +0000 (09:01 -0800)]
Merge tag 'pm-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These fix fallout after starting to use hrtimers in the runtime PM
framework, fix a few cpufreq issues, fix a recently broken reference
to cpuidle documentation, update MAINTAINERS entries for cpufreq and
cpuidle and make the recently added system suspend and resume support
in devfreq actually work.
Specifics:
- Prevent integer overflows from occurring on 32-bit when converting
milliseconds to nanoseconds in the runtime PM framework and update
comments that still refer to jiffies in it (Vincent Guittot,
Ladislav Michl).
- Fix the SCMI cpufreq driver to always use the same frequency units
for arch_set_freq_scale() and make the scale-invariant load
tracking acutally work with this driver (Quentin Perret).
- Fix freeing of dynamic OPPs in the SCPI and SCMI cpufreq drivers
broken during the 4.20 defelopment cycle (Viresh Kumar).
- Prevent the cpufreq core from attempting to return the current
frequency of offline CPUs (Sudeep Holla).
- Add devfreq suspend and resume hooks (missed previously) to the PM
core to make the recently added system suspend and resume support
in devfreq actually work (Lukasz Luba).
- Update MAINTAINERS entries for cpufreq and cpuidle, mostly to add
references to new/current documentation to them (Rafael Wysocki).
- Fix a recently broken reference to cpuidle documentation (Otto
Sabart)"
* tag 'pm-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM-runtime: Fix autosuspend_delay on 32bits arch
PM-runtime: Fix 'jiffies' in comments after switch to hrtimers
cpufreq: scmi: Fix frequency invariance in slow path
doc: trace: fix reference to cpuidle documentation file
cpufreq: check if policy is inactive early in __cpufreq_get()
cpufreq: scpi/scmi: Fix freeing of dynamic OPPs
cpuidle / Documentation: Update cpuidle MAINTAINERS entry
cpufreq / Documentation: Update cpufreq MAINTAINERS entry
PM: sleep: call devfreq suspend/resume
Linus Torvalds [Fri, 11 Jan 2019 16:58:02 +0000 (08:58 -0800)]
Merge tag 'drm-fixes-2019-01-11' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Not a huge amount for rc2, assume the usual quiet period, and rc3 will
be most of it.
amdgpu:
- Powerplay fixes
- Virtual display pinning fixes
- Golden register updates for Vega
- Pitch and gem size validation fixes
- SR-IOV init error fix
- Pagetables in system RAM disable for some Raven system
- DP-MST resume fixes
tc358767 bridge:
- fix to work with displayport connector"
* tag 'drm-fixes-2019-01-11' of git://anongit.freedesktop.org/drm/drm: (26 commits)
drm/amdgpu: disable system memory page tables for now
drm/amdgpu: set WRITE_BURST_LENGTH to 64B to workaround SDMA1 hang
drm/amdgpu: fix CPDMA hang in PRT mode for VEGA20
drm/bridge: tc358767: use DP connector if no panel set
drm/bridge: tc358767: fix output H/V syncs
drm/bridge: tc358767: reject modes which require too much BW
drm/bridge: tc358767: fix initial DP0/1_SRCCTRL value
drm/bridge: tc358767: fix single lane configuration
drm/bridge: tc358767: add defines for DP1_SRCCTRL & PHY_2LANE
drm/bridge: tc358767: add bus flags
drm/dp_mst: Add __must_check to drm_dp_mst_topology_mgr_resume()
drm/amdgpu: Don't fail resume process if resuming atomic state fails
drm/amdgpu: Don't ignore rc from drm_dp_mst_topology_mgr_resume()
drm/amdgpu: validate user GEM object size
drm/amdgpu: validate user pitch alignment
drm/amd/powerplay: drop the unnecessary uclk hard min setting
drm/amd/powerplay: avoid possible buffer overflow
drm/amd/powerplay: create pp_od_clk_voltage device file under OD support
drm/amd/powerplay: update OD support flag for SKU with no OD capabilities
drm/amdgpu: make gfx9 enter into rlc safe mode when set MGCG
...
Dmitry Safonov [Wed, 9 Jan 2019 01:17:40 +0000 (01:17 +0000)]
tty: Don't hold ldisc lock in tty_reopen() if ldisc present
Try to get reference for ldisc during tty_reopen().
If ldisc present, we don't need to do tty_ldisc_reinit() and lock the
write side for line discipline semaphore.
Effectively, it optimizes fast-path for tty_reopen(), but more
importantly it won't interrupt ongoing IO on the tty as no ldisc change
is needed.
Fixes user-visible issue when tty_reopen() interrupted login process for
user with a long password, observed and reported by Lukas.
Fixes: c96cf923a98d ("tty: Don't block on IO when ldisc change is pending") Fixes: 83d817f41070 ("tty: Hold tty_ldisc_lock() during tty_reopen()") Cc: Jiri Slaby <jslaby@suse.com> Reported-by: Lukas F. Hartmann <lukas@mntmn.com> Tested-by: Lukas F. Hartmann <lukas@mntmn.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavel Shilovsky [Tue, 8 Jan 2019 19:15:28 +0000 (11:15 -0800)]
CIFS: Fix error paths in writeback code
This patch aims to address writeback code problems related to error
paths. In particular it respects EINTR and related error codes and
stores and returns the first error occurred during writeback.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Acked-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Pavel Shilovsky [Thu, 3 Jan 2019 23:53:10 +0000 (15:53 -0800)]
CIFS: Move credit processing to mid callbacks for SMB3
Currently we account for credits in the thread initiating a request
and waiting for a response. The demultiplex thread receives the response,
wakes up the thread and the latter collects credits from the response
buffer and add them to the server structure on the client. This approach
is not accurate, because it may race with reconnect events in the
demultiplex thread which resets the number of credits.
Fix this by moving credit processing to new mid callbacks that collect
credits granted by the server from the response in the demultiplex thread.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Pavel Shilovsky [Fri, 4 Jan 2019 00:45:27 +0000 (16:45 -0800)]
CIFS: Fix credits calculation for cancelled requests
If a request is cancelled, we can't assume that the server returns
1 credit back. Instead we need to wait for a response and process
the number of credits granted by the server.
Create a separate mid callback for cancelled request, parse the number
of credits in a response buffer and add them to the client's credits.
If the didn't get a response (no response buffer available) assume
0 credits granted. The latter most probably happens together with
session reconnect, so the client's credits are adjusted anyway.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Ross Lagerwall [Tue, 8 Jan 2019 18:30:56 +0000 (18:30 +0000)]
cifs: Limit memory used by lock request calls to a page
The code tries to allocate a contiguous buffer with a size supplied by
the server (maxBuf). This could fail if memory is fragmented since it
results in high order allocations for commonly used server
implementations. It is also wasteful since there are probably
few locks in the usual case. Limit the buffer to be no larger than a
page to avoid memory allocation failures due to fragmentation.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Pavel Shilovsky [Thu, 10 Jan 2019 19:27:28 +0000 (11:27 -0800)]
CIFS: Do not hide EINTR after sending network packets
Currently we hide EINTR code returned from sock_sendmsg()
and return 0 instead. This makes a caller think that we
successfully completed the network operation which is not
true. Fix this by properly returning EINTR to callers.
Cc: <stable@vger.kernel.org> Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
ARM: integrator: impd1: use struct_size() in devm_kzalloc()
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
AKASHI Takahiro [Fri, 11 Jan 2019 07:40:21 +0000 (16:40 +0900)]
arm64: kexec_file: return successfully even if kaslr-seed doesn't exist
In kexec_file_load, kaslr-seed property of the current dtb will be deleted
any way before setting a new value if possible. It doesn't matter whether
it exists in the current dtb.
When executed for a PCI_ROOT_COMPLEX type, iort_match_node_callback()
expects the opaque pointer argument to be a PCI bus device. At the
moment rc_dma_get_range() passes the PCI endpoint instead of the bus,
and we've been lucky to have pci_domain_nr(ptr) return 0 instead of
crashing. Pass the bus device to iort_scan_node().
Fixes: 5ac65e8c8941 ("ACPI/IORT: Support address size limit for root complexes") Reported-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Cc: stable@vger.kernel.org Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Will Deacon <will.deacon@arm.com>
Daniel Vetter [Fri, 11 Jan 2019 09:26:21 +0000 (10:26 +0100)]
Merge tag 'drm-intel-fixes-2019-01-11' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
i915 fixes for v5.0-rc2:
- Disable PSR for Apple panels
- Broxton ERR_PTR error state fix
- Kabylake VECS workaround fix
- Unwind failure on pinning the gen7 ppgtt
- GVT workload request allocation fix
Daniel Vetter [Fri, 11 Jan 2019 09:25:05 +0000 (10:25 +0100)]
Merge tag 'drm-misc-fixes-2019-01-10-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Second pull request, drm-misc-fixes for v5.0-rc2:
- Fix fb-helper to work correctly with SDL 1.2 bugs.
- Fix lockdep warning in the atomic ioctl and setproperty.
* pm-cpufreq:
cpufreq: scmi: Fix frequency invariance in slow path
cpufreq: check if policy is inactive early in __cpufreq_get()
cpufreq: scpi/scmi: Fix freeing of dynamic OPPs
cpufreq / Documentation: Update cpufreq MAINTAINERS entry
Ingo Molnar [Fri, 11 Jan 2019 07:12:09 +0000 (08:12 +0100)]
Merge tag 'perf-core-for-mingo-5.0-20190110' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/core fixes and improvements from Arnaldo Carvalho de Melo:
perf trace:
Ravi Bangoria:
- Rework PowerPC syscall table generation, now using a .tbl file just like
x86_64 and S/390, also silencing a tools build warning about headers out of
sync with the kernel sources.
tools include uapi:
Arnaldo Carvalho de Melo:
- Sync linux/if_link.h copy with the kernel sources, silencing a build warning.
perf top:
Arnaldo Carvalho de Melo:
- Add 'arch_cpu_idle' to the list of kernel idle symbols, noticed on a Orange
Pi Zero ARM board, just like with other symbols in other arches.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ilia Mirkin [Fri, 14 Dec 2018 03:44:08 +0000 (22:44 -0500)]
drm/nouveau/falcon: avoid touching registers if engine is off
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108980 Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
drm/nouveau: Don't disable polling in fallback mode
When a fan is controlled via linear fallback without cstate, we
shouldn't stop polling. Otherwise it won't be adjusted again and
keeps running at an initial crazy pace.
Fixes: 800efb4c2857 ("drm/nouveau/drm/therm/fan: add a fallback if no fan control is specified in the vbios")
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1103356
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107447 Reported-by: Thomas Blume <thomas.blume@suse.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Martin Peres <martin.peres@free.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Yi Zeng [Wed, 9 Jan 2019 07:33:07 +0000 (15:33 +0800)]
i2c: dev: prevent adapter retries and timeout being set as minus value
If adapter->retries is set to a minus value from user space via ioctl,
it will make __i2c_transfer and __i2c_smbus_xfer skip the calling to
adapter->algo->master_xfer and adapter->algo->smbus_xfer that is
registered by the underlying bus drivers, and return value 0 to all the
callers. The bus driver will never be accessed anymore by all users,
besides, the users may still get successful return value without any
error or information log print out.
If adapter->timeout is set to minus value from user space via ioctl,
it will make the retrying loop in __i2c_transfer and __i2c_smbus_xfer
always break after the the first try, due to the time_after always
returns true.
Signed-off-by: Yi Zeng <yizeng@asrmicro.com>
[wsa: minor grammar updates to commit message] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
Fabio Estevam [Wed, 26 Dec 2018 12:06:19 +0000 (10:06 -0200)]
qcom-scm: Include <linux/err.h> header
Since commit e6f6d63ed14c ("drm/msm: add headless gpu device for imx5")
the DRM_MSM symbol can be selected by SOC_IMX5 causing the following
error when building imx_v6_v7_defconfig:
In file included from ../drivers/gpu/drm/msm/adreno/a5xx_gpu.c:17:0:
../include/linux/qcom_scm.h: In function 'qcom_scm_set_cold_boot_addr':
../include/linux/qcom_scm.h:73:10: error: 'ENODEV' undeclared (first use in this function)
return -ENODEV;
Include the <linux/err.h> header file to fix this problem.
Jens Axboe [Thu, 10 Jan 2019 22:29:57 +0000 (15:29 -0700)]
Merge branch 'nvme-5.0' of git://git.infradead.org/nvme into for-linus
Pull NVMe fixes from Christoph.
* 'nvme-5.0' of git://git.infradead.org/nvme:
nvme: don't initlialize ctrl->cntlid twice
nvme: introduce NVME_QUIRK_IGNORE_DEV_SUBNQN
nvme: pad fake subsys NQN vid and ssvid with zeros
nvme-multipath: zero out ANA log buffer
nvme-fabrics: unset write/poll queues for discovery controllers
nvme-tcp: don't ask if controller is fabrics
nvme-tcp: remove dead code
nvme-pci: fix out of bounds access in nvme_cqe_pending
nvme-pci: rerun irq setup on IO queue init errors
nvme-pci: use the same attributes when freeing host_mem_desc_bufs.
nvme-pci: fix the wrong setting of nr_maps
Dave Airlie [Thu, 10 Jan 2019 21:37:56 +0000 (07:37 +1000)]
Merge branch 'drm-fixes-5.0' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
- Powerplay fixes
- Virtual display pinning fixes
- Golden register updates for vega
- Pitch and gem size validation fixes
- Fix for error case in sr-iov init
- Disable page tables in system memory on RV due to issues with IOMMU
reported on some platforms
Linus Torvalds [Thu, 10 Jan 2019 21:36:53 +0000 (13:36 -0800)]
Merge tag 'riscv-for-linus-4.21-rc2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux
Pull RISC-V updates from Palmer Dabbelt:
"This tag contains a handful of updates that slipped through the cracks
during the merge window due to the holidays. The fixes are mostly
independent, with the exception of one larger audit-related branch.
Core RISC-V updates:
- The BSS has been moved, which shrinks flat images.
- A fix to test-bpf so it compiles on RV64I-based systems.
- A fix to respect the kernel commandline when there is no device
tree.
- A fix to prevent CPUs from trying to put themselves to sleep when
bringing down the system.
- Support for MODULE_SECTIONS on RV32I-based systems.
- [new in v2] The addition of an SBI earlycon driver. This is
definately a new feature, but I'd like to include it now because I
dropped this patch when submitting the merge window PR that removed
our EARLY_PRINTK support.
RISC-V audit updates:
- The addition of NR_syscalls into unistd.h, which is necessary for
CONFIG_FTRACE_SYSCALLS.
- The definition of CREATE_TRACE_POINTS so __tracepoint_sys_{enter,exit}
get defined.
- A fix for trace_sys_exit() so we can enable HAVE_SYSCALL_TRACEPOINTS
As usual, I've tested this by booting a Fedora-based image on a recent
QEMU (this time just whatever I had lying around).
* tag 'riscv-for-linus-4.21-rc2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
tty/serial: Add RISC-V SBI earlycon support
riscv: add HAVE_SYSCALL_TRACEPOINTS to Kconfig
riscv: fix trace_sys_exit hook
riscv: define CREATE_TRACE_POINTS in ptrace.c
riscv: define NR_syscalls in unistd.h
riscv: audit: add audit hook in do_syscall_trace_enter/exit()
riscv: add audit support
RISC-V: Support MODULE_SECTIONS mechanism on RV32
MAINTAINERS: SiFive drivers: add myself as a SiFive driver maintainer
MAINTAINERS: SiFive drivers: change the git tree to a SiFive git tree
riscv: don't stop itself in smp_send_stop
arch: riscv: support kernel command line forcing when no DTB passed
tools uapi: fix RISC-V 64-bit support
RISC-V: Make BSS section as the last section in vmlinux.lds.S
Dave Airlie [Thu, 10 Jan 2019 20:32:37 +0000 (06:32 +1000)]
Merge tag 'drm-misc-fixes-2019-01-10' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Pull request for drm-misc-fixes for v5.0-rc2:
- Fixes for the tc358767 bridge to work correctly with
tc358867 using a DP connector.
- Make resume work on amdgpu when a DP-MST display is unplugged.
Pavel Shilovsky [Sat, 22 Dec 2018 20:40:05 +0000 (12:40 -0800)]
CIFS: Fix credit computation for compounded requests
In SMB3 protocol every part of the compound chain consumes credits
individually, so we need to call wait_for_free_credits() for each
of the PDUs in the chain. If an operation is interrupted, we must
ensure we return all credits taken from the server structure back.
Without this patch server can sometimes disconnect the session
due to credit mismatches, especially when first operation(s)
are large writes.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org>
Pavel Shilovsky [Fri, 4 Jan 2019 00:45:13 +0000 (16:45 -0800)]
CIFS: Do not set credits to 1 if the server didn't grant anything
Currently we reset the number of total credits granted by the server
to 1 if the server didn't grant us anything int the response. This
violates the SMB3 protocol - we need to trust the server and use
the credit values from the response. Fix this by removing the
corresponding code.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org>
Pavel Shilovsky [Wed, 19 Dec 2018 22:49:09 +0000 (22:49 +0000)]
CIFS: Fix adjustment of credits for MTU requests
Currently for MTU requests we allocate maximum possible credits
in advance and then adjust them according to the request size.
While we were adjusting the number of credits belonging to the
server, we were skipping adjustment of credits belonging to the
request. This patch fixes it by setting request credits to
CreditCharge field value of SMB2 packet header.
Also ask 1 credit more for async read and write operations to
increase parallelism and match the behavior of other operations.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org>
Dan Carpenter [Sat, 5 Jan 2019 18:18:03 +0000 (21:18 +0300)]
cifs: Fix a tiny potential memory leak
The most recent "it" allocation is leaked on this error path. I
believe that small allocations always succeed in current kernels so
this doesn't really affect run time.
Fixes: 54be1f6c1c37 ("cifs: Add DFS cache routines") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Dan Carpenter [Sat, 5 Jan 2019 12:25:29 +0000 (15:25 +0300)]
cifs: Fix a debug message
This debug message was never shown because it was checking for NULL
returns but extract_hostname() returns error pointers.
Fixes: 93d5cb517db3 ("cifs: Add support for failover in cifs_reconnect()") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Will Deacon [Tue, 8 Jan 2019 16:19:01 +0000 (16:19 +0000)]
arm64: kpti: Avoid rewriting early page tables when KASLR is enabled
A side effect of commit c55191e96caa ("arm64: mm: apply r/o permissions
of VM areas to its linear alias as well") is that the linear map is
created with page granularity, which means that transitioning the early
page table from global to non-global mappings when enabling kpti can
take a significant amount of time during boot.
Given that most CPU implementations do not require kpti, this mainly
impacts KASLR builds where kpti is forcefully enabled. However, in these
situations we know early on that non-global mappings are required and
can avoid the use of global mappings from the beginning. The only gotcha
is Cavium erratum #27456, which we must detect based on the MIDR value
of the boot CPU.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reported-by: John Garry <john.garry@huawei.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
Linus Torvalds [Thu, 10 Jan 2019 17:20:46 +0000 (09:20 -0800)]
Merge tag 'vfio-v5.0-rc2' of git://github.com/awilliam/linux-vfio
Pull VFIO fixes from Alex Williamson:
- Fix trace header include path for in-tree builds (Masahiro Yamada)
- Fix overflow in unmap wrap-around test (Alex Williamson)
* tag 'vfio-v5.0-rc2' of git://github.com/awilliam/linux-vfio:
vfio/type1: Fix unmap overflow off-by-one
vfio/pci: set TRACE_INCLUDE_PATH to fix the build error
Linus Torvalds [Thu, 10 Jan 2019 17:17:48 +0000 (09:17 -0800)]
Merge tag 'sound-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes for USB-audio, HD-audio and cs46xx.
The USB-audio fixes are for out-of-bound accesses and a regression in
the recent cleanup, while HD-audio fixes are usual device-specific
quirks"
* tag 'sound-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek - Disable headset Mic VREF for headset mode of ALC225
ALSA: hda/realtek - Add unplug function into unplug state of Headset Mode for ALC225
ALSA: usb-audio: fix CM6206 register definitions
ALSA: cs46xx: Potential NULL dereference in probe
ALSA: hda/realtek - Support Dell headset mode for New AIO platform
ALSA: usb-audio: Fix an out-of-bound read in create_composite_quirks
ALSA: usb-audio: Always check descriptor sizes in parser code
ALSA: usb-audio: Check mixer unit descriptors more strictly
ALSA: usb-audio: Avoid access before bLength check in build_audio_procunit()
Linus Torvalds [Thu, 10 Jan 2019 17:14:12 +0000 (09:14 -0800)]
Merge tag 'mtd/fixes-for-5.0-rc2' of git://git.infradead.org/linux-mtd
Pull mtd fixes from Boris Brezillon:
"Core MTD Fixes:
- Fix a bug introduced when exposing MTD devs as NVMEM providers and
check for add_mtd_device() return code everywhere
raw NAND fixes:
- Fix a memory corruption in the QCOM driver"
* tag 'mtd/fixes-for-5.0-rc2' of git://git.infradead.org/linux-mtd:
mtd: rawnand: qcom: fix memory corruption that causes panic
mtd: Check add_mtd_device() ret code
mtd: Fix the check on nvmem_register() ret code
Qu Wenruo [Tue, 8 Jan 2019 06:08:18 +0000 (14:08 +0800)]
btrfs: Use real device structure to verify dev extent
[BUG]
Linux v5.0-rc1 will fail fstests/btrfs/163 with the following kernel
message:
BTRFS error (device dm-6): dev extent devid 1 physical offset 13631488 len 8388608 is beyond device boundary 0
BTRFS error (device dm-6): failed to verify dev extents against chunks: -117
BTRFS error (device dm-6): open_ctree failed
[CAUSE]
Commit cf90d884b347 ("btrfs: Introduce mount time chunk <-> dev extent
mapping check") introduced strict check on dev extents.
We use btrfs_find_device() with dev uuid and fs uuid set to NULL, and
only dependent on @devid to find the real device.
For seed devices, we call clone_fs_devices() in open_seed_devices() to
allow us search seed devices directly.
However clone_fs_devices() just populates devices with devid and dev
uuid, without populating other essential members, like disk_total_bytes.
This makes any device returned by btrfs_find_device(fs_info, devid,
NULL, NULL) is just a dummy, with 0 disk_total_bytes, and any dev
extents on the seed device will not pass the device boundary check.
[FIX]
This patch will try to verify the device returned by btrfs_find_device()
and if it's a dummy then re-search in seed devices.
Fixes: cf90d884b347 ("btrfs: Introduce mount time chunk <-> dev extent mapping check") CC: stable@vger.kernel.org # 4.19+ Reported-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
devm_kzalloc(), devm_kstrdup() and devm_kasprintf() all can
fail internal allocation and return NULL. Using any of the assigned
objects without checking is not safe. As this is early in the boot
phase and these allocations really should not fail, any failure here
is probably an indication of a more serious issue so it makes little
sense to try and rollback the previous allocated resources or try to
continue; but rather the probe function is simply exited with -ENOMEM.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Fixes: 684284b64aae ("ARM: integrator: add MMCI device to IM-PD1") Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Ravi Bangoria [Thu, 10 Jan 2019 09:49:35 +0000 (15:19 +0530)]
perf powerpc: Rework syscall table generation
Commit aff850393200 ("powerpc: add system call table generation
support") changed how systemcall table is generated for powerpc.
Incorporate these changes into perf as well.
Committer testing:
$ podman run --entrypoint=/bin/sh --privileged -v /home/acme/git:/git --rm -ti docker.io/acmel/linux-perf-tools-build-ubuntu:18.04-x-powerpc64
perfbuilder@d7a7af166a80:/git/perf$ head -2 /etc/os-release
NAME="Ubuntu"
VERSION="18.04.1 LTS (Bionic Beaver)"
perfbuilder@d7a7af166a80:/git/perf$
perfbuilder@d7a7af166a80:/git/perf$ make ARCH=powerpc CROSS_COMPILE=powerpc64-linux-gnu- EXTRA_CFLAGS= -C /git/linux/tools/perf O=/tmp/build/perf
make: Entering directory '/git/linux/tools/perf'
BUILD: Doing 'make -j8' parallel build
HOSTCC /tmp/build/perf/fixdep.o
HOSTLD /tmp/build/perf/fixdep-in.o
LINK /tmp/build/perf/fixdep
Warning: Kernel ABI header at 'tools/include/uapi/linux/mman.h' differs from latest version at 'include/uapi/linux/mman.h'
diff -u tools/include/uapi/linux/mman.h include/uapi/linux/mman.h
sh: 1: command: Illegal option -c
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ OFF ]
... libaudit: [ OFF ]
... libbfd: [ OFF ]
... libelf: [ on ]
... libnuma: [ OFF ]
... numa_num_possible_cpus: [ OFF ]
... libperl: [ OFF ]
... libpython: [ OFF ]
... libslang: [ OFF ]
... libcrypto: [ OFF ]
... libunwind: [ OFF ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... lzma: [ OFF ]
... get_cpuid: [ OFF ]
... bpf: [ on ]
Makefile.config:445: No sys/sdt.h found, no SDT events are defined, please install systemtap-sdt-devel or systemtap-sdt-dev
Makefile.config:491: No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR
Makefile.config:583: No libcrypto.h found, disables jitted code injection, please install libssl-devel or libssl-dev
Makefile.config:598: slang not found, disables TUI support. Please install slang-devel, libslang-dev or libslang2-dev
Makefile.config:612: GTK2 not found, disables GTK2 support. Please install gtk2-devel or libgtk2.0-dev
Makefile.config:639: Missing perl devel files. Disabling perl scripting support, please install perl-ExtUtils-Embed/libperl-dev
Makefile.config:666: No python interpreter was found: disables Python support - please install python-devel/python-dev
Makefile.config:721: No bfd.h/libbfd found, please install binutils-dev[el]/zlib-static/libiberty-dev to gain symbol demangling
Makefile.config:750: No liblzma found, disables xz kernel module decompression, please install xz-devel/liblzma-dev
Makefile.config:763: No numa.h found, disables 'perf bench numa mem' benchmark, please install numactl-devel/libnuma-devel/libnuma-dev
Makefile.config:814: No libbabeltrace found, disables 'perf data' CTF format support, please install libbabeltrace-dev[el]/libbabeltrace-ctf-dev
Makefile.config:840: No alternatives command found, you need to set JDIR= to point to the root of your Java directory
GEN /tmp/build/perf/common-cmds.h
<SNIP>
CC /tmp/build/perf/util/syscalltbl.o
<SNIP>
LD /tmp/build/perf/libperf-in.o
AR /tmp/build/perf/libperf.a
LINK /tmp/build/perf/perf
make: Leaving directory '/git/linux/tools/perf'
perfbuilder@d7a7af166a80:/git/perf$ head /tmp/build/perf/arch/powerpc/include/generated/asm/syscalls_64.c
static const char *syscalltbl_powerpc_64[] = {
[0] = "restart_syscall",
[1] = "exit",
[2] = "fork",
[3] = "read",
[4] = "write",
[5] = "open",
[6] = "close",
[7] = "waitpid",
[8] = "creat",
perfbuilder@d7a7af166a80:/git/perf$ tail /tmp/build/perf/arch/powerpc/include/generated/asm/syscalls_64.c
[381] = "pwritev2",
[382] = "kexec_file_load",
[383] = "statx",
[384] = "pkey_alloc",
[385] = "pkey_free",
[386] = "pkey_mprotect",
[387] = "rseq",
[388] = "io_pgetevents",
};
#define SYSCALLTBL_POWERPC_64_MAX_ID 388
perfbuilder@d7a7af166a80:/git/perf$ head /tmp/build/perf/arch/powerpc/include/generated/asm/syscalls_32.c
static const char *syscalltbl_powerpc_32[] = {
[0] = "restart_syscall",
[1] = "exit",
[2] = "fork",
[3] = "read",
[4] = "write",
[5] = "open",
[6] = "close",
[7] = "waitpid",
[8] = "creat",
perfbuilder@d7a7af166a80:/git/perf$ tail /tmp/build/perf/arch/powerpc/include/generated/asm/syscalls_32.c
[381] = "pwritev2",
[382] = "kexec_file_load",
[383] = "statx",
[384] = "pkey_alloc",
[385] = "pkey_free",
[386] = "pkey_mprotect",
[387] = "rseq",
[388] = "io_pgetevents",
};
#define SYSCALLTBL_POWERPC_32_MAX_ID 388
perfbuilder@d7a7af166a80:/git/perf$
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20190110094936.3132-1-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
commit 4a15c75c4246 ("drm/i915: Introduce per-engine workarounds")
refactored the workaround code to have functions per-engine, but didn't
call any of them from logical_xcs_ring_init. Since we do have a non-RCS
workaround for KBL (WaKBLVECSSemaphoreWaitPoll) we do need to call
intel_engine_init_workarounds for non-RCS engines.
Note that whitelist is still RCS-only.
v2: move the call to logical_ring_init (Chris)
Fixes: 4a15c75c4246 ("drm/i915: Introduce per-engine workarounds") Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190110013232.8972-2-daniele.ceraolospurio@intel.com
(cherry picked from commit a60acb223fecc77531540196008ac2de89e2a162) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Chris Wilson [Sat, 22 Dec 2018 03:06:23 +0000 (03:06 +0000)]
drm/i915: Unwind failure on pinning the gen7 ppgtt
If we fail to pin the ggtt vma slot for the ppgtt page tables, we need
to unwind the locals before reporting the error. Or else on subsequent
attempts to bind the page tables into the ggtt, we will already believe
that the vma has been pinned and continue on blithely. If something else
should happen to be at that location, choas ensues.
Fixes: a2bbf7148342 ("drm/i915/gtt: Only keep gen6 page directories pinned while active") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Cc: <stable@vger.kernel.org> # v4.19+ Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181222030623.21710-1-chris@chris-wilson.co.uk
(cherry picked from commit d4de753526f4d99f541f1b6ed1d963005c09700c) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Chris Wilson [Fri, 7 Dec 2018 11:05:54 +0000 (11:05 +0000)]
drm/i915: Skip the ERR_PTR error state
Although commit fb6f0b64e455 ("drm/i915: Prevent machine hang from
Broxton's vtd w/a and error capture") applied cleanly after a 24 month
hiatus, the code had moved on with new methods for peeking and fetching
the captured gpu info. Make sure we catch all uses of the stashed error
state and avoid dereferencing the error pointer.
v2: Move error pointer determination into i915_gpu_capture_state
v3: Restore early check to avoid capturing and then throwing away
subsequent GPU error states.
arm64: dts: marvell: armada-ap806: reserve PSCI area
The memory area [0x4000000-0x4200000[ is occupied by the PSCI firmware. Any
attempt to access it from Linux leads to an immediate crash.
So let's make the same memory reservation as the vendor kernel.
[gregory: added as comment that this region matches the mainline U-boot] Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
mm/mmu_notifier: mm/rmap.c: Fix a mmu_notifier range bug in try_to_unmap_one
The conversion to use a structure for mmu_notifier_invalidate_range_*()
unintentionally changed the usage in try_to_unmap_one() to init the
'struct mmu_notifier_range' with vma->vm_start instead of @address,
i.e. it invalidates the wrong address range. Revert to the correct
address range.
Manifests as KVM use-after-free WARNINGs and subsequent "BUG: Bad page
state in process X" errors when reclaiming from a KVM guest due to KVM
removing the wrong pages from its own mappings.
Reported-by: leozinho29_eu@hotmail.com Reported-by: Mike Galbraith <efault@gmx.de> Reported-and-tested-by: Adam Borowski <kilobyte@angband.pl> Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Pankaj gupta <pagupta@redhat.com> Cc: Christian König <christian.koenig@amd.com> Cc: Jan Kara <jack@suse.cz> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Ross Zwisler <zwisler@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Felix Kuehling <felix.kuehling@amd.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Andrew Morton <akpm@linux-foundation.org> Fixes: ac46d4f3c432 ("mm/mmu_notifier: use structure for invalidate_range_start/end calls v2") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tetsuo Handa [Thu, 10 Jan 2019 10:19:31 +0000 (19:19 +0900)]
gpu/drm: Fix lock held when returning to user space.
We need to call drm_modeset_acquire_fini() when drm_atomic_state_alloc()
failed or call drm_modeset_acquire_init() after drm_atomic_state_alloc()
succeeded.
Vincent Guittot [Thu, 10 Jan 2019 09:00:40 +0000 (10:00 +0100)]
PM-runtime: Fix autosuspend_delay on 32bits arch
Cast autosuspend_delay to u64 to make sure that the full computation
of 'expires' or slack will be done in u64, even on 32bits arch.
Otherwise, any delay greater than 2^31 nsec can overflow if signed
32bits is used when converting delay from msec to nsec.
Fixes: 8234f6734c5d (PM-runtime: Switch autosuspend over to using hrtimers) Reported-by: Tony Lindgren <tony@atomide.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Ladislav Michl [Wed, 9 Jan 2019 23:19:44 +0000 (00:19 +0100)]
PM-runtime: Fix 'jiffies' in comments after switch to hrtimers
PM-runtime now uses the hrtimers infrastructure for autosuspend, however
comments still reference 'jiffies'.
Fixes: 8234f6734c5d (PM-runtime: Switch autosuspend over to using hrtimers) Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Ilya Dryomov [Tue, 8 Jan 2019 18:47:38 +0000 (19:47 +0100)]
rbd: don't return 0 on unmap if RBD_DEV_FLAG_REMOVING is set
There is a window between when RBD_DEV_FLAG_REMOVING is set and when
the device is removed from rbd_dev_list. During this window, we set
"already" and return 0.
Returning 0 from write(2) can confuse userspace tools because
0 indicates that nothing was written. In particular, "rbd unmap"
will retry the write multiple times a second:
projects / mirror_ubuntu-jammy-kernel.git / log