Rodrigo Vivi [Fri, 1 Dec 2023 04:21:52 +0000 (23:21 -0500)]
drm/doc/rfc: Mark drm_scheduler as completed
Current drm-xe-next doesn't have any drm/scheduler patch that is not
already accepted in drm-misc-next. This completed this goal with
the consensus of how the drm/scheduler fits to the fw scheduling and
the relationship between drm_gpu_scheduler and drm_sched_entity.
Matthew Brost [Fri, 1 Dec 2023 04:21:51 +0000 (23:21 -0500)]
drm/doc/rfc: Mark long running workload as complete.
No DRM scheduler changes required, drivers just return NULL in run_job
vfunc.
The rough consensus is that no helper or extra scaffolding is needed
around long-running jobs and no further changes to drm-scheduler.
At least for now. Other drivers that currently do long-running workloads
have no plat to use drm-scheduler. Besides, the current consensus is
that this solution of simply returning NULL to the run_job function should
work without extra code duplication or complication.
On top of that, this item was already a non-blocking one for upstreaming Xe,
so let's move that to the 'Completed' section and revisit the long-running
solution as a community after Xe is integrated in DRM.
encoder->funcs entry might be NULL, so check it first before calling its
methods. This fixes NULL pointer dereference observed on Rasberry Pi
3b/4b boards.
drm/bridge: Return NULL instead of plain 0 in drm_dp_hpd_bridge_register() stub
sparse complains:
drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c: note: in included file:
include/drm/bridge/aux-bridge.h:29:16: sparse: sparse: Using plain integer as NULL pointer
usb: typec: qcom-pmic-typec: Only select DRM_AUX_HPD_BRIDGE with OF
CONFIG_DRM_AUX_HPD_BRIDGE depends on CONFIG_OF but that dependency is
not included when CONFIG_TYPEC_QCOM_PMIC selects it, resulting in a
Kconfig warning when CONFIG_OF is disabled:
WARNING: unmet direct dependencies detected for DRM_AUX_HPD_BRIDGE
Depends on [n]: HAS_IOMEM [=y] && DRM_BRIDGE [=y] && OF [=n]
Selected by [m]:
- TYPEC_QCOM_PMIC [=m] && USB_SUPPORT [=y] && TYPEC [=m] && TYPEC_TCPM [=m] && (ARCH_QCOM || COMPILE_TEST [=y]) && (DRM [=m] || DRM [=m]=n) && DRM_BRIDGE [=y]
Only select CONFIG_DRM_AUX_HPD_BRIDGE with both CONFIG_DRM_BRIDGE and
CONFIG_OF to clear up the warning.
usb: typec: nb7vpq904m: Only select DRM_AUX_BRIDGE with OF
CONFIG_DRM_AUX_BRIDGE depends on CONFIG_OF but that dependency is not
included when CONFIG_TYPEC_MUX_NB7VPQ904M selects it, resulting in a
Kconfig warning when CONFIG_OF is disabled:
WARNING: unmet direct dependencies detected for DRM_AUX_BRIDGE
Depends on [n]: HAS_IOMEM [=y] && DRM_BRIDGE [=y] && OF [=n]
Selected by [y]:
- TYPEC_MUX_NB7VPQ904M [=y] && USB_SUPPORT [=y] && TYPEC [=y] && I2C [=y] && (DRM [=y] || DRM [=y]=n) && DRM_BRIDGE [=y]
Only select CONFIG_DRM_AUX_BRIDGE with both CONFIG_DRM_BRIDGE and
CONFIG_OF to clear up the warning.
After reading the code, I think this is what happens:
We have a DSI host defined in the device tree and a DSI peripheral under
that host (i.e. an i2c device using the DSI as data bus doesn't exhibit
this behavior).
The host driver calls mipi_dsi_host_register(), which causes (via a few
functions) mipi_dsi_device_add() to be called for the DSI peripheral. So
now we have a DSI device under the host, but attach hasn't been called.
Normally the probing of the devices continues, and eventually the DSI
peripheral's driver will call mipi_dsi_attach(), attaching the
peripheral.
However, if the host driver's probe encounters an error after calling
mipi_dsi_host_register(), and before the peripheral has called
mipi_dsi_attach(), the host driver will do cleanups and return an error
from its probe function. The cleanups include calling
mipi_dsi_host_unregister().
mipi_dsi_host_unregister() will call two functions for all its DSI
peripheral devices: mipi_dsi_detach() and mipi_dsi_device_unregister().
The latter makes sense, as the device exists, but the former may be
wrong as attach has not necessarily been done.
To fix this, track the attached state of the peripheral, and only detach
from mipi_dsi_host_unregister() if the peripheral was attached.
Note that I have only tested this with a board with an i2c DSI
peripheral, not with a "pure" DSI peripheral.
However, slightly related, the unregister machinery still seems broken.
E.g. if the DSI host driver is unbound, it'll detach and unregister the
DSI peripherals. After that, when the DSI peripheral driver unbound
it'll call detach either directly or using the devm variant, leading to
a crash. And probably the driver will crash if it happens, for some
reason, to try to send a message via the DSI bus.
Tomi Valkeinen [Fri, 3 Nov 2023 13:14:04 +0000 (15:14 +0200)]
drm/framebuffer: Fix use of uninitialized variable
smatch reports:
drivers/gpu/drm/drm_framebuffer.c:654 drm_mode_getfb2_ioctl() error: uninitialized symbol 'ret'.
'ret' is possibly not set when there are no errors, causing the error
above. I can't say if that ever happens in real-life, but in any case I
think it is good to initialize 'ret' to 0.
Tomi Valkeinen [Fri, 3 Nov 2023 13:14:03 +0000 (15:14 +0200)]
drm/drm_file: fix use of uninitialized variable
smatch reports:
drivers/gpu/drm/drm_file.c:967 drm_show_memory_stats() error: uninitialized symbol 'supported_status'.
'supported_status' is only set in one code path. I'm not familiar with
the code to say if that path will always be ran in real life, but
whether that is the case or not, I think it is good to initialize
'supported_status' to 0 to silence the warning (and possibly fix a bug).
Dan Carpenter [Wed, 6 Dec 2023 15:05:15 +0000 (18:05 +0300)]
drm/bridge: nxp-ptn3460: simplify some error checking
The i2c_master_send/recv() functions return negative error codes or
they return "len" on success. So the error handling here can be written
as just normal checks for "if (ret < 0) return ret;". No need to
complicate things.
Btw, in this code the "len" parameter can never be zero, but even if
it were, then I feel like this would still be the best way to write it.
Fixes: 914437992876 ("drm/bridge: nxp-ptn3460: fix i2c_master_send() error checking") Suggested-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/04242630-42d8-4920-8c67-24ac9db6b3c9@moroto.mountain
Donald Robson [Mon, 4 Dec 2023 15:13:37 +0000 (15:13 +0000)]
drm/imagination: Removed unused functions in pvr_fw_trace
Fixing the warning below due to an unused file level vtable. Removing
only this causes additional warnings for the now unused functions, so
I've removed those too.
>> drivers/gpu/drm/imagination/pvr_fw_trace.c:205:37: warning: 'pvr_fw_trace_group_mask_fops' defined but not used [-Wunused-const-variable=]
205 | static const struct file_operations pvr_fw_trace_group_mask_fops = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
Changes since v1:
- Corrected hash in Fixes tag.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311302054.MVYPxFCE-lkp@intel.com/ Fixes: cb56cd610866 ("drm/imagination: Add firmware trace to debugfs") Signed-off-by: Donald Robson <donald.robson@imgtec.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231204151337.60930-1-donald.robson@imgtec.com
Remove unnecessary include statements for <drm/drm_plane_helper.h>.
The file contains helpers for non-atomic code and should not be
required by most drivers. No functional changes.
drm/simpledrm: Do not include <drm/drm_plane_helper.h>
Remove unnecessary include statements for <drm/drm_plane_helper.h>.
The file contains helpers for non-atomic code and should not be
required by most drivers. No functional changes.
drm/ofdrm: Do not include <drm/drm_plane_helper.h>
Remove unnecessary include statements for <drm/drm_plane_helper.h>.
The file contains helpers for non-atomic code and should not be
required by most drivers. No functional changes.
drm/solomon: Do not include <drm/drm_plane_helper.h>
Remove unnecessary include statements for <drm/drm_plane_helper.h>.
The file contains helpers for non-atomic code and should not be
required by most drivers. No functional changes.
drm/shmobile: Do not include <drm/drm_plane_helper.h>
Remove unnecessary include statements for <drm/drm_plane_helper.h>.
The file contains helpers for non-atomic code and should not be
required by most drivers. No functional changes.
drm/loongson: Do not include <drm/drm_plane_helper.h>
Remove unnecessary include statements for <drm/drm_plane_helper.h>.
The file contains helpers for non-atomic code and should not be
required by most drivers. No functional changes.
drm/amdgpu: Do not include <drm/drm_plane_helper.h>
Remove unnecessary include statements for <drm/drm_plane_helper.h>.
The file contains helpers for non-atomic code and should not be
required by most drivers. No functional changes.
The AGP subsystem supports a user-space interface via /dev/agpgart. It
is only enabled with DRM support for mode setting in user space. (i.e.,
CONFIG_DRM_LEGACY). All of that DRM code has been removed and the option
will go away. Hence remove the AGP frontend.
Modern DRM drivers with kernel mode setting handle AGP support internally.
drm: Remove locking for legacy ioctls and DRM_UNLOCKED
Modern DRM drivers acquire ioctl locks by themselves. Legacy ioctls
for user-space mode setting used to acquire drm_global_mutex. After
removing the ioctl entry points, also remove the locking code. The only
legacy ioctl without global locking was VBLANK_WAIT, which has been
removed as well. Hence remove the related DRM_UNLOCKED flag.
Remove all hooks and calls into code for user-space mode setting from
the DRM core. Without the drivers and ioctl entry points, none of this
is required any longer.
drm: Remove the legacy DRM_IOCTL_MODESET_CTL ioctl
DRM drivers with user-space mode setting have been removed in Linux
v6.3. [1] Now remove the ioctl entry points for these drivers. Invoking
any of the ioctl ops will unconditionally return -EINVAL to user space.
Invoking DRM_IOCTL_MODESET_CTL is different from the other legacy
ioctl ops as it returns 0 even without CONFIG_DRM_LEGACY set. From the
original commit 29935554b384 ("drm: Disallow DRM_IOCTL_MODESET_CTL for
KMS drivers") it is not apparent how or why the operation differs from
the others. It is likely just an oversight in commit 61ae227032e7
("drm: allow removal of legacy codepaths (v4.1)"), which allowed
disabling leagacy ioctls in the first place. Still keep this removal
separate from the other ioctls to allow an easy revert, if necessary.
DRM drivers with user-space mode setting have been removed in Linux
v6.3. [1] Now remove the ioctl entry points for these drivers. Invoking
any of the ioctl ops will unconditionally return -EINVAL to user space.
This has already been the behavior for kernels without CONFIG_DRM_LEGACY
set.
The drm_atomic_print_new_state() already prints private object state via
drm_atomic_private_obj_print_state(). Add private object state dumping
to __drm_state_dump(), so that it is also included into drm_state_dump()
output and into debugfs/dri/N/state file.
Boris Brezillon [Mon, 4 Dec 2023 15:14:06 +0000 (16:14 +0100)]
drm/gpuvm: Let drm_gpuvm_bo_put() report when the vm_bo object is destroyed
Some users need to release resources attached to the vm_bo object when
it's destroyed. In Panthor's case, we need to release the pin ref so
BO pages can be returned to the system when all GPU mappings are gone.
This could be done through a custom drm_gpuvm::vm_bo_free() hook, but
this has all sort of locking implications that would force us to expose
a drm_gem_shmem_unpin_locked() helper, not to mention the fact that
having a ::vm_bo_free() implementation without a ::vm_bo_alloc() one
seems odd. So let's keep things simple, and extend drm_gpuvm_bo_put()
to report when the object is destroyed.
drm/panfrost: Synchronize and disable interrupts before powering off
To make sure that we don't unintentionally perform any unclocked and/or
unpowered R/W operation on GPU registers, before turning off clocks and
regulators we must make sure that no GPU, JOB or MMU ISR execution is
pending: doing that requires to add a mechanism to synchronize the
interrupts on suspend.
Add functions panfrost_{gpu,job,mmu}_suspend_irq() which will perform
interrupts masking and ISR execution synchronization, and then call
those in the panfrost_device_runtime_suspend() handler in the exact
sequence of job (may require mmu!) -> mmu -> gpu.
As a side note, JOB and MMU suspend_irq functions needed some special
treatment: as their interrupt handlers will unmask interrupts, it was
necessary to add an `is_suspended` bitmap which is used to address the
possible corner case of unintentional IRQ unmasking because of ISR
execution after a call to synchronize_irq().
At resume, clear each is_suspended bit in the reset path of JOB/MMU
to allow unmasking the interrupts.
drm/panfrost: Add gpu_irq, mmu_irq to struct panfrost_device
In preparation for adding a IRQ synchronization mechanism for PM suspend,
add gpu_irq and mmu_irq variables to struct panfrost_device and change
functions panfrost_gpu_init() and panfrost_mmu_init() to use those.
drm/panfrost: Ignore core_mask for poweroff and disable PWRTRANS irq
Some SoCs may be equipped with a GPU containing two core groups
and this is exactly the case of Samsung's Exynos 5422 featuring
an ARM Mali-T628 MP6 GPU: the support for this GPU in Panfrost
is partial, as this driver currently supports using only one
core group and that's reflected on all parts of it, including
the power on (and power off, previously to this patch) function.
The issue with this is that even though executing the soft reset
operation should power off all cores unconditionally, on at least
one platform we're seeing a crash that seems to be happening due
to an interrupt firing which may be because we are calling power
transition only on the first core group, leaving the second one
unchanged, or because ISR execution was pending before entering
the panfrost_gpu_power_off() function and executed after powering
off the GPU cores, or all of the above.
Finally, solve this by:
- Avoid to enable the power transition interrupt on reset; and
- Ignoring the core_mask and ask the GPU to poweroff both core groups
Fixes: 22aa1a209018 ("drm/panfrost: Really power off GPU cores in panfrost_gpu_power_off()") Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231204114215.54575-2-angelogioacchino.delregno@collabora.com
Timings taken from the datasheet, although sometimes there are just
typical values and it's not clear if they are no min and max values or
if you must use the typical value exactly. To make things worse, there
is no back porch but only a combined sync and back porch length.
Unfortunately, there is not public datasheet. Therefore, here are the
relevant timings:
| min | typ | max |
-----------------+-----+--------+-----+
CLK frequency | - | 25.175 | - |
HS period | - | 800 | - |
HS pulse width | 5 | 30 | - |
HS-DEN time | 112 | 144 | 175 |
DEN pulse width | - | 640 | - |
VS pulse width | 1 | 3 | 5 |
VS-DEN time | - | 35 | - |
VS period | - | 525 | - |
Marco Felsch [Thu, 23 Nov 2023 17:08:04 +0000 (18:08 +0100)]
drm/panel: ilitek-ili9881c: make use of prepare_prev_first
The panel.prepare() call requires an initialized MIPI-DSI host, so set
the prepare_prev_first flag to indicate that the host must be
initialized first.
Chris Morgan [Mon, 4 Dec 2023 18:57:15 +0000 (12:57 -0600)]
drm/panel: himax-hx8394: Add Support for Powkiddy X55 panel
Add support for the Powkiddy X55 panel as used on the Powkiddy X55
handheld gaming console. This panel uses a Himax HX8394 display
controller and requires a vendor provided init sequence. The display
resolution is 720x1280 and is 67mm by 121mm as measured with calipers.
Although the Solid Fill planes patchset got all reviews and
acknowledgements, it doesn't fulfill requirements for the new uABI. It
has neither corresponding open-source userspace implementation nor the
IGT tests coverage. Reverting this patchset until userspace obligations
are fulfilled.
Although the Solid Fill planes patchset got all reviews and
acknowledgements, it doesn't fulfill requirements for the new uABI. It
has neither corresponding open-source userspace implementation nor the
IGT tests coverage. Reverting this patchset until userspace obligations
are fulfilled.
Although the Solid Fill planes patchset got all reviews and
acknowledgements, it doesn't fulfill requirements for the new uABI. It
has neither corresponding open-source userspace implementation nor the
IGT tests coverage. Reverting this patchset until userspace obligations
are fulfilled.
Although the Solid Fill planes patchset got all reviews and
acknowledgements, it doesn't fulfill requirements for the new uABI. It
has neither corresponding open-source userspace implementation nor the
IGT tests coverage. Reverting this patchset until userspace obligations
are fulfilled.
Although the Solid Fill planes patchset got all reviews and
acknowledgements, it doesn't fulfill requirements for the new uABI. It
has neither corresponding open-source userspace implementation nor the
IGT tests coverage. Reverting this patchset until userspace obligations
are fulfilled.
Although the Solid Fill planes patchset got all reviews and
acknowledgements, it doesn't fulfill requirements for the new uABI. It
has neither corresponding open-source userspace implementation nor the
IGT tests coverage. Reverting this patchset until userspace obligations
are fulfilled.
Although the Solid Fill planes patchset got all reviews and
acknowledgements, it doesn't fulfill requirements for the new uABI. It
has neither corresponding open-source userspace implementation nor the
IGT tests coverage. Reverting this patchset until userspace obligations
are fulfilled.
drm/bridge: migrate bridge_chains to per-encoder file
Instead of having a single file with all bridge chains, list bridges
under a corresponding per-encoder debugfs directory.
While we are at it, also slightly improve the formatting of the bridge
data: split a single line entry into multiple lines, include the symbol
name of the bridge funcs and add the textual representation of the
bridge ops.
Each of connectors and CRTCs used by the DRM device provides debugfs
directory, which is used by several standard debugfs files and can
further be extended by the driver. Add such generic debugfs directories
for encoder.
Several USB-C controllers implement a pretty simple DRM bridge which
implements just the HPD notification operations. Add special helper
for creating such simple bridges.
Define a helper for creating simple transparent bridges which serve the
only purpose of linking devices into the bridge chain up to the last
bridge representing the connector. This is especially useful for
DP/USB-C bridge chains, which can span across several devices, but do
not require any additional functionality from the intermediate bridges.
The i2c_master_send/recv() functions return negative error codes or the
number of bytes that were able to be sent/received. This code has
two problems. 1) Instead of checking if all the bytes were sent or
received, it checks that at least one byte was sent or received.
2) If there was a partial send/receive then we should return a negative
error code but this code returns success.
Add supplies to the driver that can be used to turn the Lontium lt8912b
on and off. It can have up to 7 independent supplies, we add them all
and enable/disable them with bulk_enable/disable.
drm/display/dp: Add the remaining Square PHY patterns DPCD register definitions
DP2.1 Specs added new DPCDs definitions for square pattern configs[1]
These new definitions are used for UHBR Source Transmitter
Equalizations tests[2]. Add the 3 new values for square pattern.
heminhong [Fri, 10 Nov 2023 05:50:31 +0000 (13:50 +0800)]
drm/qxl: remove unused declaration
Some functions are never used by the driver,
removing the functions declaration, it can be reducing program size,
and improving code readability and maintainability.
drm/drv: propagate errors from drm_modeset_register_all()
In case the drm_modeset_register_all() function fails, its error code
will be ignored. Instead make the drm_dev_register() bail out in case of
such an error.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311242159.hh8MWiAm-lkp@intel.com/ Fixes: ff5f643de0bf ("drm/imagination: Add GEM and VM related code") Signed-off-by: Donald Robson <donald.robson@imgtec.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231130160017.259902-5-donald.robson@imgtec.com
Donald Robson [Thu, 30 Nov 2023 16:00:16 +0000 (16:00 +0000)]
drm/imagination: pvr_gpuvm_free() now static
The function below is used only within this source file, but is not static.
drivers/gpu/drm/imagination/pvr_vm.c:542:6: error: no previous prototype for 'pvr_gpuvm_free' [-Werror=missing-prototypes]
542 | void pvr_gpuvm_free(struct drm_gpuvm *gpuvm)
Make it static.
Reported-by: Arnd Bergmann <arnd@arndb.de> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311242159.hh8MWiAm-lkp@intel.com/ Fixes: ff5f643de0bf ("drm/imagination: Add GEM and VM related code") Signed-off-by: Donald Robson <donald.robson@imgtec.com> Link: https://lore.kernel.org/r/20231130160017.259902-4-donald.robson@imgtec.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
Donald Robson [Thu, 30 Nov 2023 16:00:15 +0000 (16:00 +0000)]
drm/imagination: pvr_device_process_active_queues now static
The function below is used only within this source file, but is not static.
>> drivers/gpu/drm/imagination/pvr_device.c:129:6: warning: no previous prototype for function 'pvr_device_process_active_queues' [-Wmissing-prototypes]
129 | void pvr_device_process_active_queues(struct pvr_device *pvr_dev)
| ^
drivers/gpu/drm/imagination/pvr_device.c:129:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
129 | void pvr_device_process_active_queues(struct pvr_device *pvr_dev)
| ^
| static
1 warning generated.
Make it static.
Reported-by: Arnd Bergmann <arnd@arndb.de> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311250632.giVEx7MU-lkp@intel.com/ Fixes: eaf01ee5ba28 ("drm/imagination: Implement job submission and scheduling") Signed-off-by: Donald Robson <donald.robson@imgtec.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231130160017.259902-3-donald.robson@imgtec.com
Donald Robson [Thu, 30 Nov 2023 16:00:14 +0000 (16:00 +0000)]
drm/imagination: Fixed missing header in pvr_fw_meta
A missing header causes the compiler to warn that the function below is not
forward declared.
>> drivers/gpu/drm/imagination/pvr_fw_meta.c:33:1: warning: no previous prototype for function 'pvr_meta_cr_read32' [-Wmissing-prototypes]
33 | pvr_meta_cr_read32(struct pvr_device *pvr_dev, u32 reg_addr, u32 *reg_value_out)
| ^
drivers/gpu/drm/imagination/pvr_fw_meta.c:32:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
32 | int
| ^
| static
1 warning generated.
Include the correct header.
Reported-by: Arnd Bergmann <arnd@arndb.de> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311250226.Da2yiSKp-lkp@intel.com/ Fixes: cc1aeedb98ad ("drm/imagination: Implement firmware infrastructure and META FW support") Signed-off-by: Donald Robson <donald.robson@imgtec.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231130160017.259902-2-donald.robson@imgtec.com
Donald Robson [Thu, 30 Nov 2023 16:00:13 +0000 (16:00 +0000)]
drm/imagination: Fixed warning due to implicit cast to bool
This line appears to confuse the compiler and had been noticed previously in
clang-tidy output. There isn't anything fundamentally wrong that I can see.
I suspect that it just looks like a mistake - hence the first note. By making
the second operand an actual bool result, const correctness can be preserved
while silencing the warning.
>> drivers/gpu/drm/imagination/pvr_device_info.c:230:47: warning: use of logical '&&' with constant operand [-Wconstant-logical-operand]
230 | } else if (features_size == mapping_max_size && (mapping_max & 63)) {
| ^ ~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/imagination/pvr_device_info.c:230:47: note: use '&' for a bitwise operation
230 | } else if (features_size == mapping_max_size && (mapping_max & 63)) {
| ^~
| &
drivers/gpu/drm/imagination/pvr_device_info.c:230:47: note: remove constant to silence this warning
230 | } else if (features_size == mapping_max_size && (mapping_max & 63)) {
| ~^~~~~~~~~~~~~~~~~~~~~
1 warning generated.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311241752.3iLyyFcA-lkp@intel.com/ Fixes: f99f5f3ea7ef ("drm/imagination: Add GPU ID parsing and firmware loading") Signed-off-by: Donald Robson <donald.robson@imgtec.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231130160017.259902-1-donald.robson@imgtec.com
Marco Pagani [Thu, 30 Nov 2023 17:14:16 +0000 (18:14 +0100)]
drm/test: add a test suite for GEM objects backed by shmem
This patch introduces an initial KUnit test suite for GEM objects
backed by shmem buffers.
Suggested-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Marco Pagani <marpagan@redhat.com>
v5:
- using __drm_kunit_helper_alloc_drm_device() to avoid local struct
v4:
- Add missing MMU dependency for DRM_GEM_SHMEM_HELPER (kernel test robot)
v3:
- Explicitly cast pointers in the helpers
- Removed unused pointer to parent dev in struct fake_dev
- Test entries reordering in Kconfig and Makefile sent as a separate patch
v2:
- Improved description of test cases
- Cleaner error handling using KUnit actions
- Alphabetical order in Kconfig and Makefile
drm: remove drm_bridge_hpd_disable() from drm_bridge_connector_destroy()
drm_bridge_hpd_enable()/drm_bridge_hpd_disable() callbacks call into
the respective driver's hpd_enable()/hpd_disable() ops. These ops control
the HPD enable/disable logic which in some cases like MSM can be a
dedicate hardware block to control the HPD.
During probe_defer cases, a connector can be initialized and then later
destroyed till the probe is retried. During connector destroy in these
cases, the hpd_disable() callback gets called without a corresponding
hpd_enable() leading to an unbalanced state potentially causing even
a crash.
This can be avoided by the respective drivers maintaining their own
state logic to ensure that a hpd_disable() without a corresponding
hpd_enable() just returns without doing anything.
However, to have a generic fix it would be better to avoid the
hpd_disable() callback from the connector destroy path and let
the hpd_enable() / hpd_disable() balance be maintained by the
corresponding drm_bridge_connector_enable_hpd() /
drm_bridge_connector_disable_hpd() APIs which should get called by
drm_kms_helper_disable_hpd().
changes in v2:
- minor change in commit text (Dmitry)
drm: improve the documentation of connector hpd ops
While making the changes in [1], it was noted that the documentation
of the enable_hpd() and disable_hpd() does not make it clear that
these ops should not try to do hpd state maintenance and should only
enable/disable hpd related hardware for the connector.
The state management of these calls to make sure these calls are
balanced is handled by the DRM core and we should keep it that way
to minimize the overhead in the drivers which implement these ops.
Jessica Zhang [Fri, 27 Oct 2023 22:32:53 +0000 (15:32 -0700)]
drm: Add solid fill pixel source
Add "SOLID_FILL" as a valid pixel source. If the pixel_source property is
set to "SOLID_FILL", it will display data from the drm_plane "solid_fill"
blob property.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Sebastian Wick <sebastian@sebastianwick.net> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231027-solid-fill-v7-3-780188bfa7b2@quicinc.com
Jessica Zhang [Fri, 27 Oct 2023 22:32:51 +0000 (15:32 -0700)]
drm: Introduce pixel_source DRM plane property
Add support for pixel_source property to drm_plane and related
documentation. In addition, force pixel_source to
DRM_PLANE_PIXEL_SOURCE_FB in DRM_IOCTL_MODE_SETPLANE as to not break
legacy userspace.
This enum property will allow user to specify a pixel source for the
plane. Possible pixel sources will be defined in the
drm_plane_pixel_source enum.
Currently, the only pixel sources are DRM_PLANE_PIXEL_SOURCE_FB (the
default value) and DRM_PLANE_PIXEL_SOURCE_NONE.
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Sebastian Wick <sebastian@sebastianwick.net> Acked-by: Simon Ser <contact@emersion.fr> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231027-solid-fill-v7-1-780188bfa7b2@quicinc.com
Rob Clark [Wed, 23 Aug 2023 21:54:56 +0000 (14:54 -0700)]
dma-buf/sw_sync: Add fence deadline support
This consists of simply storing the most recent deadline, and adding an
ioctl to retrieve the deadline. This can be used in conjunction with
the SET_DEADLINE ioctl on a fence fd for testing. Ie. create various
sw_sync fences, merge them into a fence-array, set deadline on the
fence-array and confirm that it is propagated properly to each fence.
v2: Switch UABI to express deadline as u64
v3: More verbose UAPI docs, show how to convert from timespec
v4: Better comments, track the soonest deadline, as a normal fence
implementation would, return an error if no deadline set.
Rob Clark [Wed, 23 Aug 2023 21:54:55 +0000 (14:54 -0700)]
dma-buf/sync_file: Add SET_DEADLINE ioctl
The initial purpose is for igt tests, but this would also be useful for
compositors that wait until close to vblank deadline to make decisions
about which frame to show.
projects / mirror_ubuntu-kernels.git / log