Sonika Jindal [Wed, 20 May 2015 08:10:48 +0000 (13:40 +0530)]
drm/i915/skl: Swapping 90 and 270 to be compliant with Xrandr
Since DRM_ROTATE is counter clockwise (which is compliant with Xrandr),
and HW rotation is clockwise, swapping 90/270 to work as expected from
userspace.
v2: Rebased
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Sonika Jindal <sonika.jindal@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Tue, 19 May 2015 11:29:16 +0000 (12:29 +0100)]
drm/i915: Tighten the exposure ARGB/ABGR 8888 formats
ARGB8888 is used for cursors on all platforms so we need to allow it
everywhere.
ABGR8888 is currently only honoured:
- on VLV/CHV in sprite planes
- on SKL+ for primary and sprite planes
so only allow it for those platforms.
Note that we only support ARGB8888/ABGR8888 on the primary plane for
SKL/BXT because we have in line of sight the pipe bottom color on those
platforms and because the primary plane programming on VLV/CHV doesn't
anything different for those formats today.
v2: Fix the logic to forbid the creation ABGR2101010 fbs (Ville)
v3: Still allow the creation of ARGB8888 fbs now that cursor planes use
real fb objects (found by PRTS).
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Vandana Kannan [Wed, 13 May 2015 06:48:52 +0000 (12:18 +0530)]
drm/i915/bxt: Port PLL programming BUN
BUN 1: prop_coeff, int_coeff, tdctargetcnt programming updated and tied to
VCO frequencies. Program i_lockthresh in PORT_PLL_9.
VCO calculated based on the formula:
Desired Output = Port bit rate in MHz (DisplayPort HBR2 is 5400 MHz)
Fast Clock = Desired Output / 2
VCO = Fast Clock * P1 * P2
Prop_coeff, int_coeff, and tdctargetcnt modified according to above
calculation.
BUN 2: Port PLLs require additional programming at certain frequencies -
DCO amplitude in PORT_PLL_10
Review comments from Siva which were addressed in the initial version of the
patch.
- Change PORT_PLL_LOCK_THRESHOLD to PORT_PLL_LOCK_THRESHOLD_MASK
- Calculate for HDMI
- Correct values for vco = 5.4
- return in case of invalid vco range
v2: Imre's review comments addressed
- change dcoampovr_en to dcoampovr_en_h
- change PORT_PLL_DCO_AMP_OVR_EN to PORT_PLL_DCO_AMP_OVR_EN_H
- Correct lane stagger value for 324MHz
- Make coef common for HDMI and DP
- remove superfluous comments
v3: Imre's comments addressed
- Remove Prop_coeff, int_coeff, tdctargetcnt, dcoampovr_en, gain_ctl,
dcoampovr_en_h from bxt_clk_div and make them local variables.
Chris Wilson [Fri, 15 May 2015 10:42:21 +0000 (11:42 +0100)]
drm/i915: Use uninterruptible mutex_lock for userptr bo creation
Mika encountered one pathological scenario under X where acquiring all
the mm locks (required to insert a mmu notifier) was very slow, so slow
that by the time we tried to lock the struct_mutex with the usual call
to i915_mutex_lock_interruptible(), X's signal timer had fired causing
us to restart the ioctl (and so looped indefinitely).
While I suspect this is the result of another bug (something leaking mm
perhaps?) we can forgo the error checking and interuptible nature of the
lock here so we only have to pay the expense once and get on with it.
This does expose the userptr creation routine to a driver livelock
though by not being interruptible.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com>
[danvet: Init ret to avoid issues reported by PRTS.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm/i915: Preserve ddi_pll_sel when allocating new pipe_config
When the modeset code is reached with a CRTC that only needs a flip, the
code that assigns PLLs is skipped. But since there is still a state swap
for that CRTC, the current PLL assignment needs to be preserved. I
missed the ddi_pll_sel field in the following commit, which causes
warnings in DDI platforms.
commit 4978cc93d9ac240b435ce60431aef24239b4c270
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date: Tue Apr 21 17:13:21 2015 +0300
drm/i915: Preserve shared DPLL information in new pipe_config
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90410 Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm/i915: Don't overwrite (e)DP PLL selection on SKL
In the following commit, the place where the contents of dpll_hw_state
in crtc_state where zeroed was changed. Prior to that commit, it
happened when the new state was allocated, but now that happens just
before the call the .crtc_compute_clock() hook. The DP code for SKL,
however, sets up the (private) PLL in the encoder compute config
function that has already run by the time that memset() is reached,
causing the previous value to be lost.
This patch fixes the issue by moving the memset() down the call chain,
so that it is only called if the values in dpll_hw_state are going to be
updated.
commit 4978cc93d9ac240b435ce60431aef24239b4c270
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date: Tue Apr 21 17:13:21 2015 +0300
drm/i915: Preserve shared DPLL information in new pipe_config
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90462 Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Reported-and-tested-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Wed, 13 May 2015 12:34:05 +0000 (15:34 +0300)]
drm/i915/bios: be more explicit about discarding iomem address space
Add one explicit discard of __iomem address space qualifier in
validate_vbt(), and respect it otherwise. This adds clarity in the code,
and reduces the sparse warnings from the module to just one.
Quoting Daniel, "The vbt really is plain old memory. Except that it's
reserved in the e820 table as something special and hence treated as io
range by the kernel. But it is memory, hence casting away the __iomem is
imo the right approach."
Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Fri, 15 May 2015 14:07:02 +0000 (15:07 +0100)]
drm/i915/skl: Remove unnecessary local variables in skl_plane_ctl*()
Ville noticed in another patch we we didn't need them at all, so remove
them. It's worth saying that it makes no difference to code generated as
gcc is clever enough to optimize it out.
v2: Remove 'break' after 'return' in switches (Ville)
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Wed, 13 May 2015 07:35:25 +0000 (10:35 +0300)]
drm/i915/dsi: add support for DSI PLL N1 divisor values
Currently DSI PLL N1 is hardcoded off. Make it possible to use it
later. This should have no functional changes for now.
v2: s/ffz(~(n))/ffs(n) - 1/ (Ville)
Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Animesh Manna [Wed, 13 May 2015 16:43:29 +0000 (22:13 +0530)]
drm/i915/skl: Documentation for CSR firmware
Added docbook info regarding context save and restore (CSR)
firmware support added from gen9 onwards to drive newly added
DMC (Display microcontroller) in display engine.
v1: Initial version as RFC.
v2: Used "DOC:" tag for csr description based on review comment from Daniel.
Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Mika Kuoppala [Fri, 15 May 2015 10:09:21 +0000 (13:09 +0300)]
drm/i915: Don't read dpcd for disconnected ports
Reading from disconnected ports will spit out timeout error
on the dmesg. Skip the attempted read if the port is not
connected and avoid confusing users/testcases about
expected timeouts.
This new dpcd debugfs entry was introduced by commit aa7471d228eb
("drm/i915: add i915 specific connector debugfs file for DPCD")
v2 by Jani: move the check at the top, out of the loop.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90060 Tested-by: yex.tian@intel.com Cc: Jani Nikula <jani.nikula@intel.com> Cc: Bob Paauwe <bob.j.paauwe@intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Dan Carpenter [Tue, 12 May 2015 18:07:37 +0000 (21:07 +0300)]
drm/edid: fix a debug message
There is an extra semi-colon on the if statement so the debug output
always says "Failed to write EDID checksum" even when it didn't fail.
Fixes: 559be30cb74d ('drm/i915: Implement the intel_dp_autotest_edid function for DP EDID complaince tests') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Tue, 12 May 2015 15:13:16 +0000 (16:13 +0100)]
drm/i915/skl: Replace BUG() by MISSING_CASE() in skl_plane_ctl_format()
Let's be consistent with the others skl_plane_ctl_*() functions and use
a MISSING_CASE(). Not only that, but it's a rude to BUG() the whole
machine here.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Tue, 12 May 2015 12:23:09 +0000 (15:23 +0300)]
drm/i915: clean up dsi pll calculation
Improve readability. No functional changes.
v2: use more rational types (Ville)
Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Tue, 12 May 2015 12:41:32 +0000 (15:41 +0300)]
drm/i915: constify validate_vbt in VBT parsing
Make input and output of validate_vbt const, and fix the fallout. We
shouldn't modify the VBT, so make the compiler help us here.
v2: use pointer arithmetics on void* to simplify (Ville)
Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Wed, 15 Apr 2015 12:18:28 +0000 (15:18 +0300)]
drm/i915: constify find_section in VBT parsing
Make input and output of find_section const, and fix the fallout. We
shouldn't modify the VBT, so make the compiler help us here.
Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Mon, 11 May 2015 17:49:10 +0000 (20:49 +0300)]
drm/i915: Use HOTPLUG_INT_STATUS_G4X on VLV/CHV
Use HOTPLUG_INT_STATUS_G4X instead of HOTPLUG_INT_STATUS_I915 on VLV/CHV
so that we don't confuse the AUX status bits with SDVO status bits.
Avoid pointless log spam as below while handling AUX interrupts:
[drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000
[drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000
[drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000
[drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000
[drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000
[drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064
Note that there's no functional issue, it's just that the sdvo bits
overlap with the dp aux bits. Hence every time we receive an aux
interrupt we also think there's an sdvo hpd interrupt, but due to lack
of any sdvo encoders nothing ever happens because of that.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com>
[danvet: Add Ville's explanation why nothing functional really
changes.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Mon, 11 May 2015 17:49:09 +0000 (20:49 +0300)]
drm/i915: Remove excess inline keywords
Remove some inline keywords. One of the functions has clearly outgrown
it anyway, so let's just leave it to the compiler.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Mika Kuoppala [Tue, 12 May 2015 07:35:08 +0000 (10:35 +0300)]
drm/i915/gtt: Fix the boundary check for vm area
The check for start + length >= total_vm_size is
wrong since start + length can be exactly the size of
the vm.
Fix the check to allow allocation to boundary.
Fixes a regression in commit 4dd738e9cd79
("drm/i915: Fix 32b overflow check in gen8_ppgtt_alloc_page_directories")
Testcase: igt/gem_evict_everything/swapping-interruptible
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90399 Tested-by: Lu Hua <huax.lu@intel.com> Cc: Chris Wilson <chris@chris.wilson.co.uk> Cc: Dave Gordon <david.s.gordon@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chandra Konduru [Mon, 11 May 2015 21:35:47 +0000 (14:35 -0700)]
drm/i915: Make scaler_id check in check_crtc_state work for all gens
During check_crtc_state, scaler_id mispatch is being reported for HSW.
This is applicable for skl+ and not for HSW. It is introduced by
commit id:
commit a1b2278e4dfcd2dbea85e319ebf73a6b7b2f180b
Author: Chandra Konduru <chandra.konduru@intel.com>
Date: Tue Apr 7 15:28:45 2015 -0700
drm/i915: skylake panel fitting using shared scalers
This patch will make sure that we leave scaler_id as 0 for platforms
before skl and set for skl+ only. This way scaler_id check during
check_crtc_state will pass for both prior to skl and skl+ platforms.
v2:
-Leave scaler_id as 0 for gen < 9 (Daniel)
Signed-off-by: Chandra Konduru <chandra.konduru@intel.com>
References: http://lists.freedesktop.org/archives/intel-gfx/2015-May/065741.html Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Mon, 27 Apr 2015 12:41:16 +0000 (13:41 +0100)]
drm/i915: Fix race on unreferencing the wrong mmio-flip-request
As we perform the mmio-flip without any locking and then try to acquire
the struct_mutex prior to dereferencing the request, it is possible for
userspace to queue a new pageflip before the worker can finish clearing
the old state - and then it will clear the new flip request. The result
is that the new flip could be completed before the GPU has finished
rendering.
The bugs stems from removing the seqno checking in
commit 536f5b5e86b225dab94c7ff8061ae482b6077387
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date: Thu Nov 6 11:03:40 2014 +0200
drm/i915: Make mmio flip wait for seqno in the work function
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Mon, 27 Apr 2015 12:41:15 +0000 (13:41 +0100)]
drm/i915: Ensure cache flushes prior to doing CS flips
Synchronising to an object active on the same ring is a no-op, for the
benefit of execbuffer scheduler. However, for CS flips this means that
we can forgo checking whether the last write request of the object is
actually queued and more importantly whether the cache flush for the
write was emitted.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Mon, 27 Apr 2015 12:41:14 +0000 (13:41 +0100)]
drm/i915: Remove domain flubbing from i915_gem_object_finish_gpu()
We no longer interpolate domains in the same manner, and even if we did,
we should trust setting either of the other write domains would trigger
an invalidation rather than force it. Remove the tweaking of the
read_domains since it serves no purpose and use
i915_gem_object_wait_rendering() directly.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Add notes with information dug out of git history.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Deepak S [Sat, 9 May 2015 12:45:46 +0000 (18:15 +0530)]
drm/i915/chv: Set min freq to efficient frequency on chv
After feedback from the hardware team, now we set the GPU min/idel freq to RPe.
Punit is expecting us to operate GPU between Rpe & Rp0. If we drop the
frequency to RPn, punit is failing to change the vgg input voltage to
minimum :(
Since Punit validates the rps range [RPe, RP0]. This patch
removes unused cherryview_rps_min_freq function.
v2: Change commit message
v3: set min_freq before idle_freq (chris)
v4: Squash 'Remove unused rps min function' patch
Signed-off-by: Deepak S <deepak.s@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Deepak S [Sat, 9 May 2015 12:41:54 +0000 (18:11 +0530)]
drm/i915/chv: Extend set idle rps wa to chv
It is observed on BSW that requesting a new frequency from Punit
does nothing when the GPU is in rc6, and if we let GPU enter rc6
with a high frequency, Vnn remains slightly higher than at minimum
frequency. Extending vlv_set_rps_idle() workaround on CHV/BSW.
v2: Update commit msg (Ville)
suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Deepak S <deepak.s@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Deepak S [Sat, 9 May 2015 12:34:44 +0000 (18:04 +0530)]
drm/i915/vlv: Remove wait for for punit to updates freq.
When GPU is idle on VLV, Request freq to punit should be good enough to
get the voltage back to VNN. Also, make sure gfx clock force applies
before requesting the freq fot vlv.
v2: Do forcewake before setting idle frequency (ville)
Update function comments to match the code (Deepak)
v3: Fix get/put across idle frequency Request. (Ville)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75244
suggested-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Deepak S <deepak.s@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Sat, 9 May 2015 01:05:55 +0000 (02:05 +0100)]
drm/i915: Be optimistic about future display engines having 7 WM levels
As we're doing throughout the code, being optimistic that platform n + 1
will mostly reuse the same things as platform n allows us to minimize
the enabling work needed.
This time, it's about the number of WM levels.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm/i915: Always keep crtc_state->active in sync with enable
With the recent modeset internal rework, we wind up setting crtc_state->enable
to false, but leave crtc_state->active as true following a
drmModeSetCrtc(fb=0), which is incorrect. This mismatch gets caught by
drm_atomic_crtc_check() and causes subsequent atomic operations (such as plane
updates while the CRTC is disabled) to fail.
Bisect points to
commit dad9a7d6d96630182fb52aae7c3856e9e7285e13
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date: Tue Apr 21 17:13:19 2015 +0300
drm/i915: Use atomic helpers for computing changed flags
as the commit that actually triggers the regression.
The difference compared to (which this patch reverts)
drm/i915: Set crtc_state->active to false when CRTC is disabled (v2)
is that we know keep state->active/enable in sync for all legacy
modeset paths, as it should be.
Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reported-and-Tested-by: Kenneth Graunke <kenneth@whitecape.org> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[danvet: Directly squash in the revert and augment the commit
message.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Revert "drm/i915: Set crtc_state->active to false when CRTC is disabled (v2)"
drm/i915: Adding dbuf support for skl nv12 format.
Skylake nv12 format requires dbuf (aka. ddb) calculations
and programming for each of y and uv sub-planes. Made minor
changes to reuse current dbuf calculations and programming
for uv plane. i.e., with this change, existing computation
is used for either packed format or uv portion of nv12
depending on incoming format. Added new code for dbuf
computation and programming for y plane.
This patch is a pre-requisite for adding NV12 format support.
Actual nv12 support is coming in later patches.
Dave Airlie [Tue, 19 May 2015 23:20:48 +0000 (09:20 +1000)]
Merge tag 'drm-amdkfd-next-2015-05-19' of git://people.freedesktop.org/~gabbayo/linux into drm-next
- Add the interrupts & events modules, including new IOCTLs to create and wait
on events. The HSA RT open source stack is mainly using events to know when
a dispatched work has been completed. In addition, this module is
a pre-requisite for the next module I'm going to upstream - debugger support
This module also handles H/W exceptions, such as memory exception received
through the IOMMUv2 H/W and Bad Opcode exception receieved from the GPU.
- Adding a new kernel module parameter to let the user decide whether he wants
to receive a SIGTERM when a memory exception occurs inside the GPU kernel and
the HSA application doesn't wait on an appropriate event, or if he just want
to receive notification about this event in dmesg. The default is the latter.
- Additional improvements for SDMA code
- Update my email address in Maintainers file.
* tag 'drm-amdkfd-next-2015-05-19' of git://people.freedesktop.org/~gabbayo/linux:
drm/amdkfd: change driver version to 0.7.2
drm/amdkfd: Implement events IOCTLs
drm/amdkfd: Add module parameter of send_sigterm
drm/amdkfd: Add bad opcode exception handling
drm/amdkfd: Add memory exception handling
drm/amdkfd: Add the events module
drm/amdkfd: add events IOCTL set definitions
drm/amdkfd: Add interrupt handling module
drm/radeon: Add init interrupt kfd->kgd interface
MAINTAINERS: update amdkfd Oded's email address
drm/amdkfd: make the sdma vm init to be asic specific
drm/amdkfd: Use new struct for asic specific ops
drm/amdkfd: reformat some debug prints
drm/amdkfd: Remove unessary void pointer cast
Dave Airlie [Tue, 19 May 2015 23:19:58 +0000 (09:19 +1000)]
Merge tag 'topic/drm-misc-2015-05-19' of git://anongit.freedesktop.org/drm-intel into drm-next
Scattering of random drm core patches. Bunch of atomic prep work too, but
the final bits for blob properties, atomic modesets and lifting the
experimental tag on the atomic ioctl are still blocked on Daniel Stone
finalizing and testing the weston support for it. I hope that we can get
it all ready for 4.2 though.
* tag 'topic/drm-misc-2015-05-19' of git://anongit.freedesktop.org/drm-intel: (22 commits)
drm/atomic: Allow drivers to subclass drm_atomic_state, v3
drm/atomic: remove duplicated assignment of old_plane_state
drm/dp: Fix comment in DP helper
drm/atomic: add drm_atomic_get_existing_*_state helpers
drm/core: get rid of -Iinclude/drm
drm/i915: get rid of -Iinclude/drm
drm/atomic-helpers: Export drm_atomic_helper_update_legacy_modeset_state
drm/atomic-helpers: Update vblank timestamping constants
drm/sysfs: remove unnecessary connector type checks
drm/sysfs: split DVI-I and TV-out attributes
drm/sysfs: make optional attribute groups per connector type
drm/sysfs: add a helper for extracting connector type from kobject
drm/edid: Add CEA modes before inferred modes
drm/prime: Allow internal imports without import_sg_table
drm: Add reference counting to blob properties
drm: Introduce blob_lock
drm: Introduce helper for replacing blob properties
drm: Don't leak path blob property when updating
drm/atomic: Don't open-code CRTC state destroy
drm/edid: Add DMT modes with ID > 0x50
...
This patch adds Peripheral Page Request (PPR) failure processing
and reporting.
Bad address or pointer to a system memory block with inappropriate
read/write permission cause such PPR failure during a user queue
processing. PPR request handling is done by IOMMU driver notifying
AMDKFD module on PPR failure.
The process triggering a PPR failure will be notified by
appropriate event or SIGTERM signal will be sent to it.
v3:
- Change all bool fields in struct kfd_memory_exception_failure to
uint32_t
Andrew Lewycky [Sun, 10 May 2015 09:15:46 +0000 (12:15 +0300)]
drm/amdkfd: Add the events module
This patch adds the events module (kfd_events.c) and the interrupt
handle module for Kaveri (cik_event_interrupt.c).
The patch updates the interrupt_is_wanted(), so that it now calls the
interrupt isr function specific for the device that received the
interrupt. That function(implemented in cik_event_interrupt.c)
returns whether this interrupt is of interest to us or not.
The patch also updates the interrupt_wq(), so that it now calls the
device's specific wq function, which checks the interrupt source
and tries to signal relevant events.
v2:
Increase limit of signal events to 4096 per process
Remove bitfields from struct cik_ih_ring_entry
Rename radeon_kfd_event_mmap to kfd_event_mmap
Add debug prints to allocate_free_slot and allocate_signal_page
Make allocate_event_notification_slot return a correct value
Add warning prints to create_signal_event
Remove error print from IOCTL path
Reformatted debug prints in kfd_event_mmap
Map correct size (as received from mmap) in kfd_event_mmap
v3:
Reduce limit of signal events back to 256 per process
Fix allocation of kernel memory for signal events
Signed-off-by: Andrew Lewycky <Andrew.Lewycky@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Andrew Lewycky [Wed, 16 Jul 2014 22:37:30 +0000 (01:37 +0300)]
drm/amdkfd: Add interrupt handling module
This patch adds the interrupt handling module, kfd_interrupt.c, and its
related members in different data structures to the amdkfd driver.
The amdkfd interrupt module maintains an internal interrupt ring
per amdkfd device. The internal interrupt ring contains interrupts
that needs further handling. The extra handling is deferred to
a later time through a workqueue.
There's no acknowledgment for the interrupts we use. The hardware
simply queues a new interrupt each time without waiting.
The fixed-size internal queue means that it's possible for us to lose
interrupts because we have no back-pressure to the hardware.
However, only interrupts that are "wanted" by amdkfd, are copied into
the amdkfd s/w interrupt ring, in order to minimize the chances
for overflow of the ring.
Signed-off-by: Andrew Lewycky <Andrew.Lewycky@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Oded Gabbay [Thu, 5 Mar 2015 13:13:18 +0000 (15:13 +0200)]
drm/radeon: Add init interrupt kfd->kgd interface
This patch adds a new interface function to the kfd->kgd interface.
The function is kgd_init_interrupts() and its function is to
initialize a pipe's interrupts.
The function currently enables the timestamp interrupt and the
bad opcode interrupt.
Dave Airlie [Tue, 19 May 2015 00:18:13 +0000 (10:18 +1000)]
Merge tag 'drm-intel-next-2015-05-08' of git://anongit.freedesktop.org/drm-intel into drm-next
- skl plane scaler support (Chandra Kondru)
- enable hsw cmd parser (Daniel and fix from Rebecca Palmer)
- skl dc5/6 support (low power display modes) from Suketu&Sunil
- dp compliance testing patches (Todd Previte)
- dp link training optimization (Mika Kahola)
- fixes to make skl resume work (Damien)
- rework modeset code to fully use atomic state objects (Ander&Maarten)
- pile of bxt w/a patchs from Nick Hoath
- (linear) partial gtt mmap support (Joonas Lahtinen)
* tag 'drm-intel-next-2015-05-08' of git://anongit.freedesktop.org/drm-intel: (103 commits)
drm/i915: Update DRIVER_DATE to 20150508
drm/i915: Only wait for required lanes in vlv_wait_port_ready()
drm/i915: Fix possible security hole in command parsing
drm/edid: Kerneldoc for newly added edid_corrupt
drm/i915: Reject huge tiled objects
Revert "drm/i915: Hack to tie both common lanes together on chv"
drm/i915: Work around DISPLAY_PHY_CONTROL register corruption on CHV
drm/i915: Implement chv display PHY lane stagger setup
drm/i915/vlv: remove wait for previous GFX clk disable request
drm/i915: Set crtc_state->active to false when CRTC is disabled (v2)
drm/i915/skl: Re-indent part of skl_ddi_calculate_wrpll()
drm/i915: Use partial view in mmap fault handler
drm/i915: Add a partial GGTT view type
drm/i915: Consider object pinned if any VMA is pinned
drm/i915: Do not make assumptions on GGTT VMA sizes
drm/i915/bxt: Mark WaCcsTlbPrefetchDisable as for Broxton also.
drm/i915/bxt: Mark WaDisablePartialResolveInVc as for Broxton also.
drm/i915/bxt: Mark Wa4x4STCOptimizationDisable as for Broxton also.
drm/i915/bxt: Move WaForceEnableNonCoherent to Skylake only
drm/i915/bxt: Enable WaEnableYV12BugFixInHalfSliceChicken7 for Broxton
...
Peter Zijlstra [Mon, 18 May 2015 09:31:50 +0000 (11:31 +0200)]
watchdog: Fix merge 'conflict'
Two watchdog changes that came through different trees had a non
conflicting conflict, that is, one changed the semantics of a variable
but no actual code conflict happened. So the merge appeared fine, but
the resulting code did not behave as expected.
Commit 195daf665a62 ("watchdog: enable the new user interface of the
watchdog mechanism") changes the semantics of watchdog_user_enabled,
which thereafter is only used by the functions introduced by b3738d293233 ("watchdog: Add watchdog enable/disable all functions").
There further appears to be a distinct lack of serialization between
setting and using watchdog_enabled, so perhaps we should wrap the
{en,dis}able_all() things in watchdog_proc_mutex.
This patch fixes a s2r failure reported by Michal; which I cannot
readily explain. But this does make the code internally consistent
again.
Reported-and-tested-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 18 May 2015 17:01:54 +0000 (10:01 -0700)]
Merge tag 'for-linus-20150516' of git://git.infradead.org/linux-mtd
Pull MTD fixes from Brian Norris:
"Two MTD fixes for 4.1:
- readtest: the signal-handling code was clobbering the error codes
we should be handling/reporting in this test, rendering it useless.
Noticed by Coverity.
- the common SPI NOR flash DT binding (merged for 4.1-rc1) is being
revised, so let's change that before 4.1 is minted"
* tag 'for-linus-20150516' of git://git.infradead.org/linux-mtd:
Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor"
mtd: readtest: don't clobber error reports
drm/atomic: Allow drivers to subclass drm_atomic_state, v3
Drivers may need to store the state of shared resources, such as PLLs
or FIFO space, into the atomic state. Allow this by making it possible
to subclass drm_atomic_state.
Changes since v1:
- Change member names for functions to atomic_state_(alloc,clear)
- Change __drm_atomic_state_new to drm_atomic_state_init
- Allow free function to be overridden too, in case extra memory is
allocated in alloc.
Changes since v2:
- Rename *_default_free to default_release, to make clear it doesn't
free the state object itself.
Cc: dri-devel@lists.freedesktop.org Acked-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jon Hunter [Wed, 13 May 2015 11:30:46 +0000 (12:30 +0100)]
drm/dp: Fix comment in DP helper
Commit 4f71d0cb76339 ("drm/dp: add a hw mutex around the transfer
functions. (v2)"), renamed the functions drm_dp_aux_register_i2c_bus()
and drm_dp_aux_unregister_i2c_bus() to drm_dp_aux_register() and
drm_dp_aux_unregister(), respectively. However, a comment referring to
the original names was not updated in the DP helper header file. Hence,
correct these names.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Linus Torvalds [Sun, 17 May 2015 04:15:59 +0000 (21:15 -0700)]
Merge tag 'usb-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some USB fixes and new device ids for 4.1-rc4.
All are pretty minor, and have been in linux-next successfully"
* tag 'usb-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb-storage: Add NO_WP_DETECT quirk for Lacie 059f:0651 devices
Added another USB product ID for ELAN touchscreen quirks.
xhci: gracefully handle xhci_irq dead device
xhci: Solve full event ring by increasing TRBS_PER_SEGMENT to 256
xhci: fix isoc endpoint dequeue from advancing too far on transaction error
usb: chipidea: debug: avoid out of bound read
USB: visor: Match I330 phone more precisely
USB: pl2303: Remove support for Samsung I330
USB: cp210x: add ID for KCF Technologies PRN device
usb: gadget: remove incorrect __init/__exit annotations
usb: phy: isp1301: work around tps65010 dependency
usb: gadget: serial: fix re-ordering of tx data
usb: gadget: hid: Fix static variable usage
usb: gadget: configfs: Fix interfaces array NULL-termination
usb: gadget: xilinx: fix devm_ioremap_resource() check
usb: dwc3: dwc3-omap: correct the register macros
Linus Torvalds [Sun, 17 May 2015 04:10:05 +0000 (21:10 -0700)]
Merge tag 'tty-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here's some TTY and serial driver fixes for reported issues.
All of these have been in linux-next successfully"
* tag 'tty-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
pty: Fix input race when closing
tty/n_gsm.c: fix a memory leak when gsmtty is removed
Revert "serial/amba-pl011: Leave the TX IRQ alone when the UART is not open"
serial: omap: Fix error handling in probe
earlycon: Revert log warnings
Linus Torvalds [Sun, 17 May 2015 04:04:56 +0000 (21:04 -0700)]
Merge tag 'staging-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging / IIO driver fixes from Greg KH:
"Here's some staging and iio driver fixes to resolve a number of
reported issues.
All of these have been in linux-next for a while"
* tag 'staging-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (31 commits)
iio: light: hid-sensor-prox: Fix memory leak in probe()
iio: adc: cc10001: Add delay before setting START bit
iio: adc: cc10001: Fix regulator_get_voltage() return value check
iio: adc: cc10001: Fix incorrect use of power-up/power-down register
staging: gdm724x: Correction of variable usage after applying ALIGN()
iio: adc: cc10001: Fix the channel number mapping
staging: vt6655: lock MACvWriteBSSIDAddress.
staging: vt6655: CARDbUpdateTSF bss timestamp correct tsf counter value.
staging: vt6655: vnt_tx_packet Correct TX order of OWNED_BY_NIC
staging: vt6655: Fix 80211 control and management status reporting.
staging: vt6655: implement IEEE80211_TX_STAT_NOACK_TRANSMITTED
staging: vt6655: device_free_tx_buf use only ieee80211_tx_status_irqsafe
staging: vt6656: use ieee80211_tx_info to select packet type.
staging: rtl8712: freeing an ERR_PTR
staging: sm750: remove incorrect __exit annotation
iio: kfifo: Set update_needed to false only if a buffer was allocated
iio: mcp320x: Fix occasional incorrect readings
iio: accel: mma9553: check input value for activity period
iio: accel: mma9553: add enable channel for activity
iio: accel: mma9551_core: prevent buffer overrun
...
Linus Torvalds [Sun, 17 May 2015 03:48:42 +0000 (20:48 -0700)]
Merge tag 'char-misc-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fix from Greg KH:
"Here is one fix, in the extcon subsystem, that resolves a reported
issue.
It's been in linux-next for a number of weeks now, sorry for not
getting it to you sooner"
* tag 'char-misc-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
extcon: usb-gpio: register extcon device before IRQ registration
Linus Torvalds [Sat, 16 May 2015 22:55:31 +0000 (15:55 -0700)]
Merge tag 'for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix a number of ext4 bugs; the most serious of which is a bug in the
lazytime mount optimization code where we could end up updating the
timestamps to the wrong inode"
* tag 'for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix an ext3 collapse range regression in xfstests
jbd2: fix r_count overflows leading to buffer overflow in journal recovery
ext4: check for zero length extent explicitly
ext4: fix NULL pointer dereference when journal restart fails
ext4: remove unused function prototype from ext4.h
ext4: don't save the error information if the block device is read-only
ext4: fix lazytime optimization
Linus Torvalds [Sat, 16 May 2015 22:50:58 +0000 (15:50 -0700)]
Merge branch 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"The first commit is a fix from Filipe for a very old extent buffer
reuse race that triggered a BUG_ON. It hasn't come up often, I looked
through old logs at FB and we hit it a handful of times over the last
year.
The rest are other corners he hit during testing"
* 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix race when reusing stale extent buffers that leads to BUG_ON
Btrfs: fix race between block group creation and their cache writeout
Btrfs: fix panic when starting bg cache writeout after IO error
Btrfs: fix crash after inode cache writeback failure
Linus Torvalds [Sat, 16 May 2015 22:33:25 +0000 (15:33 -0700)]
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"Nothing frightening this time, just smaller fixes in a number of
places.
The other changes contained here are:
MAINTAINERS file updates:
- The mach-gemini maintainer is back in action and has a new git tree
- Krzysztof Kozlowski has volunteered to be a new co-maintainer for
the samsung platforms
- updates to the files that belong to Marvell mvebu
Bug fixes:
- The largest changes are on omap2, but are only to avoid some
harmless warnings and to fix reset on omap4
- a small regression fix on tegra
- multiple fixes for incorrect IRQ affinity on vexpress
- the missing system controller on arm64 juno is added
- one revert of a patch that was accidentally applied twice for
mach-rockchip
- two clock related DT fixes for mvebu
- a workaround for suspend with old DT binaries on new exynos kernels
- Another fix for suspend on exynos, needs to be backported"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits)
MAINTAINERS: Add dts entries for some of the Marvell SoCs
MAINTAINERS: ARM: EXYNOS: Add Krzysztof Kozlowski as co-maintainer
ARM: EXYNOS: Use of_machine_is_compatible instead of soc_is_exynos4
ARM: EXYNOS: Fix failed second suspend on Exynos4
Revert "ARM: rockchip: fix undefined instruction of reset_ctrl_regs"
ARM: EXYNOS: Fix dereference of ERR_PTR returned by of_genpd_get_from_provider
ARM: EXYNOS: Don't try to initialize suspend on old DT
ARM: dts: Add keep-power-in-suspend to WiFi SDIO node for Peach Boards
ARM: gemini: fix compiler warning due wrong data type
ARM: vexpress/tc2: Add interrupt-affinity to the PMU node
ARM: vexpress/ca9: Add interrupt-affinity to the PMU node
ARM: vexpress/ca9: Add unified-cache property to l2 cache node
ARM64: juno: add sp810 support and fix sp804 clock frequency
ARM: Gemini: Maintainers update
ARM: OMAP2+: Remove bogus struct clk comparison for timer clock
ARM: dove: Add clock-names to CuBox Si5351 clk generator
ARM: AM33xx+: hwmod: re-use omap4 implementations for reset functionality
ARM: OMAP4+: PRM: add support for passing status register/bit info to reset
ARM: AM43xx: hwmod: add VPFE hwmod entries
ARM: mvebu: Fix the main PLL frequency on Armada 375, 38x and 39x SoCs
...
Linus Torvalds [Sat, 16 May 2015 22:27:33 +0000 (15:27 -0700)]
Merge branch 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal fixes from Zhang Rui:
"Specifics:
- fix an issue in intel_powerclamp driver that idle injection target
is not accurately maintained on newer Intel CPUs. Package C8 to
C10 states are introduced on these CPUs but they were not included
in the package c-state residency calculation. From Jacob Pan.
- fix a problem that package c-state idle injection was missing on
Broadwell server, by adding its id to intel_powerclamp driver.
From Jacob Pan.
- a couple of small fixes and cleanups from Joe Perches, Mathias
Krause, Dan Carpenter and Anand Moon"
* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
tools/thermal: tmon: fixed the 'make install' command
thermal: rockchip: fix an error code
thermal/powerclamp: fix missing newer package c-states
thermal/intel_powerclamp: add id for broadwell server
thermal/intel_powerclamp: add __init / __exit annotations
thermal: Use bool function return values of true/false not 1/0
Linus Torvalds [Sat, 16 May 2015 22:03:52 +0000 (15:03 -0700)]
Merge tag 'linux-kselftest-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Urgent fix for Kselftest regression introduced in 4.1-rc1 by the new
x86 test due to its hard dependency on 32-bit build environment.
A set of 5 patches fix the make kselftest run and kselftest install"
* tag 'linux-kselftest-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests, x86: Rework x86 target architecture detection
selftests, x86: Remove useless run_tests rule
selftests/x86: install tests
selftest/x86: have no dependency on all when cross building
selftest/x86: build both bitnesses
Linus Torvalds [Fri, 15 May 2015 20:06:06 +0000 (13:06 -0700)]
Merge branch 'parisc-4.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"One important patch which fixes crashes due to stack randomization on
architectures where the stack grows upwards (currently parisc and
metag only).
This bug went unnoticed on parisc since kernel 3.14 where the flexible
mmap memory layout support was added by commit 9dabf60dc4ab. The
changes in fs/exec.c are inside an #ifdef CONFIG_STACK_GROWSUP section
and will not affect other platforms.
The other two patches rename args of the kthread_arg() function and
fixes a printk output"
* 'parisc-4.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc,metag: Fix crashes due to stack randomization on stack-grows-upwards architectures
parisc: copy_thread(): rename 'arg' argument to 'kthread_arg'
parisc: %pf is only for function pointers
Brian Norris [Thu, 14 May 2015 17:32:53 +0000 (10:32 -0700)]
Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor"
In commit 8ff16cf77ce3 ("Documentation: devicetree: m25p80: add "nor-jedec"
binding"), we added a generic "nor-jedec" binding to catch all
mostly-compatible SPI NOR flash which can be detected via the READ ID
opcode (0x9F). This was discussed and reviewed at the time, however
objections have come up since then as part of this discussion:
James Hogan [Wed, 13 May 2015 10:50:55 +0000 (11:50 +0100)]
MIPS: tlb-r4k: Fix PG_ELPA comment
The ELPA bit in PageGrain is all about large *physical* addresses, so
correct the reference to "large virtual address" in the comment above
where it is set for MIPS64.
Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: David Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10038/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
projects / mirror_ubuntu-kernels.git / log